FortiOS-6 4 2-Administration - Guide
Uploaded by
Wilfried Junior Njia NdzebeFortiOS-6 4 2-Administration - Guide
Uploaded by
Wilfried Junior Njia NdzebeFortiOS - Administration Guide
Version 6.4.2
FORTINET DOCUMENT LIBRARY
https://docs.fortinet.com
FORTINET VIDEO GUIDE
https://video.fortinet.com
FORTINET BLOG
https://blog.fortinet.com
CUSTOMER SERVICE & SUPPORT
https://support.fortinet.com
FORTINET TRAINING & CERTIFICATION PROGRAM
https://www.fortinet.com/training-certification
NSE INSTITUTE
https://training.fortinet.com
FORTIGUARD CENTER
https://www.fortiguard.com
END USER LICENSE AGREEMENT
https://www.fortinet.com/doc/legal/EULA.pdf
FEEDBACK
Email: [email protected]
August 27, 2021
FortiOS 6.4.2 Administration Guide
01-641-607590-20201123
TABLE OF CONTENTS
Change Log 17
Getting started 19
Differences between models 19
Using the GUI 19
Connecting using a web browser 19
Menus 20
Tables 21
Entering values 23
Using the CLI 24
Connecting to the CLI 24
CLI basics 27
Command syntax 33
Subcommands 36
Permissions 38
FortiExplorer for iOS 38
Getting started with FortiExplorer 39
Connecting FortiExplorer to a FortiGate via WiFi 42
Running a security rating 43
Upgrading to FortiExplorer Pro 44
Basic administration 44
Registration 45
FortiCare and FortiGate Cloud login 48
Transfer a device to another FortiCloud account 51
Configuration backups 53
Troubleshooting your installation 57
Zero touch provisioning 59
Zero touch provisioning with FortiDeploy 59
Zero touch provisioning with FortiManager 61
Dashboards and widgets 63
Using dashboards 63
Viewing device dashboards in the security fabric 65
Creating a fabric system and license dashboard 66
Using widgets 68
Changing the default dashboard template 69
Monitor dashboards and widgets 70
Static & Dynamic Routing Monitor 71
DHCP monitor 73
IPSEC monitor 74
SSL VPN monitor 76
Firewall Users Monitor 77
Wifi Dashboard 77
Device inventory 84
FortiView 89
FortiView monitors and widgets 89
FortiOS 6.4.2 Administration Guide 3
Fortinet Inc.
Adding FortiView widgets 91
VDOMs and dashboards 93
FortiView interface 94
FortiView from disk 101
FortiView from FortiAnalyzer 103
FortiView from FortiGate Cloud 104
FortiView sources 106
FortiView Sessions 107
Viewing top websites and sources by category 111
Cloud application view 114
Viewing session information for a compromised host 125
Fortinet Security Fabric 128
Security Fabric settings and usage 128
Components 129
Configuring the root FortiGate and downstream FortiGates 131
Configuring FortiAnalyzer 138
Configuring other Security Fabric devices 139
Using the Security Fabric 165
Deploying the Security Fabric 177
Synchronizing objects across the Security Fabric 185
Security Fabric over IPsec VPN 189
Leveraging LLDP to simplify security fabric negotiation 195
Configuring the Security Fabric with SAML 198
Configuring single-sign-on in the Security Fabric 198
CLI commands for SAML SSO 203
SAML SSO with pre-authorized FortiGates 204
Navigating between Security Fabric members with SSO 204
Integrating FortiAnalyzer management using SAML SSO 207
Integrating FortiManager management using SAML SSO 209
Advanced option - FortiGate SP changes 210
Advanced option - unique SAML attribute types 211
Security rating 214
Security Fabric score 217
External connectors 218
SDN connectors 219
Kubernetes (K8s) SDN connectors 270
Endpoint/Identity connectors 283
Threat feeds 296
Automation stitches 307
Creating automation stitches 308
Triggers 319
Actions 323
Execute a CLI script based on CPU and memory thresholds 358
Monitoring the Security Fabric using FortiExplorer for Apple TV 363
NOC and SOC example 364
Troubleshooting 375
Viewing a summary of all connected FortiGates in a Security Fabric 376
Diagnosing automation stitches 378
FortiOS 6.4.2 Administration Guide 4
Fortinet Inc.
Network 382
Interfaces 382
Interface settings 383
Aggregation and redundancy 386
VLANs 388
Enhanced MAC VLANs 394
Inter-VDOM routing 397
Software switch 402
Hardware switch 404
Zone 405
Virtual Wire Pair 407
Virtual switch support for FortiGate 300E series 409
Failure detection for aggregate and redundant interfaces 411
VLAN inside VXLAN 411
Virtual Wire Pair with VXLAN 414
QinQ 416
Assign a subnet with the FortiIPAM service 416
Configure a VRF ID on an interface 423
DNS 425
Important DNS CLI commands 426
DNS domain list 427
FortiGate DNS server 429
DDNS 431
DNS latency information 434
DNS over TLS 436
DNS troubleshooting 437
Explicit and transparent proxies 438
Explicit web proxy 438
FTP proxy 441
Transparent proxy 443
Proxy policy addresses 446
Proxy policy security profiles 454
Explicit proxy authentication 460
Transparent web proxy forwarding 465
Upstream proxy authentication in transparent proxy mode 466
Multiple dynamic header count 468
Restricted SaaS access (Office 365, G Suite, Dropbox) 471
Explicit proxy and FortiSandbox Cloud 473
Proxy chaining (web proxy forwarding servers) 476
Agentless NTLM authentication for web proxy 481
DHCP server 484
Configure DHCP on the FortiGate 484
DHCP options 485
IP address assignment with relay agent information option 486
DHCP client options 488
Static routes 489
Policy routes 490
Configuring a policy route 490
FortiOS 6.4.2 Administration Guide 5
Fortinet Inc.
RIP 492
OSPF 492
BGP 492
Multicast 493
Multicast routing and PIM support 493
Configuring multicast forwarding 494
FortiExtender 497
Adding a FortiExtender 497
Data plan profiles 499
Direct IP support for LTE/4G 501
LLDP reception 504
Route leaking between VRFs 506
SD-WAN 509
SD-WAN quick start 509
Configuring the SD-WAN interface 510
Adding a static route 511
Selecting the implicit SD-WAN algorithm 511
Configuring firewall policies for SD-WAN 512
Link monitoring and failover 513
Results 514
Configuring SD-WAN in the CLI 518
SD-WAN zones 520
Performance SLA 525
Link health monitor 525
Factory default health checks 528
Health check options 530
Link monitoring example 533
SLA targets example 534
Health check packet DSCP marker support 536
Interface speedtest 536
Monitor performance SLA 538
SLA monitoring using the REST API 541
SD-WAN rules 543
Implicit rule 543
Best quality strategy 547
Lowest cost (SLA) strategy 550
Maximize bandwidth (SLA) strategy 553
Minimum number of links for a rule to take effect 556
Use MAC addresses in SD-WAN rules and policy routes 556
SD-WAN traffic shaping and QoS 557
SDN dynamic connector addresses in SD-WAN rules 562
Application steering using SD-WAN rules 565
DSCP tag-based traffic steering in SD-WAN 576
Advanced routing 587
Self-originating traffic 587
Using BGP tags with SD-WAN rules 591
BGP multiple path support 594
FortiOS 6.4.2 Administration Guide 6
Fortinet Inc.
Controlling traffic with BGP route mapping and service rules 597
Applying BGP route-map to multiple BGP neighbors 603
IBGP and EBGP support in VRF 609
VPN overlay 612
ADVPN and shortcut paths 612
SD-WAN monitor on ADVPN shortcuts 625
SD-WAN integration with OCVPN 626
Forward error correction on VPN overlay networks 633
Dual VPN tunnel wizard 636
Duplicate packets on other zone members 637
Advanced configuration 640
SD-WAN with FGCP HA 640
Configuring SD-WAN in an HA cluster using internal hardware switches 646
SD-WAN configuration portability 650
SD-WAN cloud on-ramp 656
Configuring the VPN overlay between the HQ FortiGate and cloud FortiGate-VM 657
Configuring the VPN overlay between the HQ FortiGate and AWS native VPN
gateway 661
Configuring the VIP to access the remote servers 665
Configuring the SD-WAN to steer traffic between the overlays 667
Verifying the traffic 672
Hub and spoke SD-WAN deployment example 679
Datacenter configuration 679
Branch configuration 684
Validation 688
Dynamic definition of SD-WAN routes 689
Adding another datacenter 690
Troubleshooting SD-WAN 691
Tracking SD-WAN sessions 691
Understanding SD-WAN related logs 691
SD-WAN related diagnose commands 695
SD-WAN bandwidth monitoring service 699
System 702
Basic system settings 702
Advanced system settings 702
Operating modes 703
Administrators 704
Administrator profiles 704
Add a local administrator 706
Remote authentication for administrators 706
Password policy 709
Admin profile option for diagnose access 710
Associating a FortiToken to an administrator account 710
SSO administrators 711
Firmware 712
Firmware upgrade notifications 712
Downloading a firmware image 713
Testing a firmware version 715
FortiOS 6.4.2 Administration Guide 7
Fortinet Inc.
Upgrading the firmware 716
Downgrading to a previous firmware version 717
Installing firmware from system reboot 718
Restoring from a USB drive 719
Controlled upgrade 720
Settings 720
Default administrator password 721
Changing the host name 721
Setting the system time 722
Configuring ports 725
Setting the idle timeout time 726
Setting the password policy 726
Changing the view settings 726
Setting the administrator password retries and lockout time 727
TLS configuration 728
Virtual Domains 729
Global and per-VDOM resources 730
Split-task VDOM mode 731
Multi VDOM mode 735
Configure VDOM-A 738
Configure VDOM-B 740
Configure the VDOM link 743
Configure VDOM-A 747
Configure VDOM-B 749
High Availability 751
Introduction to the FGCP cluster 752
Failover protection 753
FGSP (session synchronization) peer setup 755
UTM inspection on asymmetric traffic in FGSP 756
UTM inspection on asymmetric traffic on L3 758
Encryption for L3 on asymmetric traffic in FGSP 760
Synchronizing sessions between FGCP clusters 760
Using standalone configuration synchronization 762
Troubleshoot an HA formation 764
Check HA sync status 765
Disabling stateful SCTP inspection 766
Upgrading FortiGates in an HA cluster 767
HA cluster setup examples 768
HA between remote sites over managed FortiSwitches 777
Routing data over the HA management interface 781
Override FortiAnalyzer and syslog server settings 783
Force HA failover for testing and demonstrations 787
Querying autoscale clusters for FortiGate VM 790
SNMP 791
Interface access 791
MIB files 792
SNMP agent 792
SNMP v1/v2c communities 793
SNMP v3 users 795
FortiOS 6.4.2 Administration Guide 8
Fortinet Inc.
Important SNMP traps 796
SNMP traps and query for monitoring DHCP pool 798
Replacement messages 799
Modifying replacement messages 799
Replacement message images 801
Replacement message groups 803
FortiGuard 806
IPv6 FortiGuard connections 807
Configuring FortiGuard updates 807
Manual updates 808
Automatic updates 809
Sending malware statistics to FortiGuard 810
Update server location 811
Filtering 812
Override FortiGuard servers 813
Online security tools 813
FortiGuard anycast and third-party SSL validation 814
Using FortiManager as a local FortiGuard server 816
Cloud service communication statistics 817
IoT detection service 818
FortiAP query to FortiGuard IoT service to determine device details 820
Feature visibility 821
Security feature presets 821
Certificates 822
Microsoft CA deep packet inspection 822
Purchase and import a signed SSL certificate 827
Configuration scripts 830
Workspace mode 831
Custom languages 832
Policy and Objects 834
Policies 834
Firewall policy parameters 835
Profile-based NGFW vs policy-based NGFW 836
NGFW policy mode application default service 840
Application logging in NGFW policy mode 842
Policy views and policy lookup 843
Policy with source NAT 845
Policy with destination NAT 859
Policy with Internet Service 872
NAT64 policy and DNS64 (DNS proxy) 889
NAT46 policy 892
Local-in policies 896
IPv4/IPv6 access control lists 897
Mirroring SSL traffic in policies 899
Inspection mode per policy 901
OSPFv3 neighbor authentication 904
Firewall anti-replay option per policy 906
Enabling advanced policy options in the GUI 906
FortiOS 6.4.2 Administration Guide 9
Fortinet Inc.
Recognize anycast addresses in geo-IP blocking 907
Matching GeoIP by registered and physical location 908
Authentication policy extensions 910
HTTP to HTTPS redirect for load balancing 911
GTPv2 in policies 912
Use active directory objects directly in policies 914
FortiGate Cloud / FDN communication through an explicit proxy 917
No session timeout 919
MAP-E support 920
Objects 924
Address group exclusions 924
MAC addressed-based policies 926
ISDB well-known MAC address list 928
Dynamic policy — fabric devices 930
FSSO dynamic address subtype 932
ClearPass integration for dynamic address objects 935
Group address objects synchronized from FortiManager 940
Using wildcard FQDN addresses in firewall policies 942
Configure FQDN-based VIPs 944
IPv6 geography-based addresses 945
Array structure for address objects 947
IPv6 MAC addresses and usage in firewall policies 949
Traffic shaping 951
Determining your QoS requirements 952
Packet rates 953
Changing traffic shaper bandwidth unit of measurement 955
Shared traffic shaper 955
Per-IP traffic shaper 960
Type of Service-based prioritization and policy-based traffic shaping 963
Interface-based traffic shaping profile 966
Interface-based traffic shaping with NP acceleration 974
Classifying traffic by source interface 975
Configuring traffic class IDs 976
Traffic shaping schedules 979
DSCP matching (shaping) 980
QoS assignment and rate limiting for quarantined VLANs 984
Weighted random early detection queuing 985
Security Profiles 992
Inspection modes 992
Flow mode inspection (default mode) 993
Proxy mode inspection 993
Inspection mode feature comparison 995
Antivirus 997
Protocol comparison between antivirus inspection modes 998
Other antivirus differences between inspection modes 998
Databases 999
Content disarm and reconstruction for antivirus 1000
FortiGuard outbreak prevention 1002
FortiOS 6.4.2 Administration Guide 10
Fortinet Inc.
External malware block list for antivirus 1004
Checking flow antivirus statistics 1007
CIFS support 1009
Using FortiSandbox appliance with antivirus 1014
Using FortiSandbox Cloud with antivirus 1023
Web filter 1032
URL filter 1033
FortiGuard filter 1039
Credential phishing prevention 1044
Usage quota 1047
Web content filter 1049
Advanced filters 1 1053
Advanced filters 2 1057
Reliable web filter statistics 1062
Flow-based web filtering 1064
URL certificate blocklist 1066
DNS filter 1067
Configure and apply a DNS filter profile 1068
FortiGuard category-based DNS domain filtering 1070
Botnet C&C domain blocking 1073
DNS safe search 1077
Local domain filter 1078
DNS translation 1081
Using a FortiGate as a DNS server 1084
Troubleshooting for DNS filter 1086
Application control 1088
Basic category filters and overrides 1089
Port enforcement check 1093
Protocol enforcement 1093
SSL-based application detection over decrypted traffic in a sandwich topology 1095
Matching multiple parameters on application control signatures 1096
Intrusion prevention 1099
Botnet C&C IP blocking 1099
Detecting IEC 61850 MMS protocol in IPS 1103
IPS signature filter options 1104
File filter 1106
Logs 1109
Supported file types 1110
Email filter 1112
Protocol comparison between Email filter inspection modes 1113
Local-based filters 1113
FortiGuard-based filters 1116
Protocols and actions 1117
Configuring webmail filtering 1118
Data leak prevention 1118
Protocol comparison between DLP inspection modes 1120
Basic DLP filter types 1120
DLP fingerprinting 1122
FortiOS 6.4.2 Administration Guide 11
Fortinet Inc.
DLP watermarking 1126
VoIP solutions 1130
General use cases 1130
SIP message inspection and filtering 1134
SIP pinholes 1136
SIP over TLS 1137
Custom SIP RTP port range support 1138
Voice VLAN auto-assignment 1140
ICAP 1141
ICAP configuration example 1142
ICAP response filtering 1144
Web application firewall 1147
Protecting a server running web applications 1147
SSL & SSH Inspection 1151
Certificate inspection 1151
Deep inspection 1153
Protecting an SSL server 1155
Ignoring the AUTH TLS command 1156
SSH traffic file scanning 1157
Redirect to WAD after handshake completion 1158
Custom signatures 1159
Application groups in policies 1159
Blocking applications with custom signatures 1162
Overrides 1164
Web rating override 1164
Web profile override 1168
VPN 1174
IPsec VPNs 1174
General IPsec VPN configuration 1174
Site-to-site VPN 1199
Remote access 1244
Aggregate and redundant VPN 1278
Overlay Controller VPN (OCVPN) 1313
ADVPN 1344
Other VPN topics 1378
VPN IPsec troubleshooting 1403
SSL VPN 1410
SSL VPN best practices 1411
SSL VPN quick start 1413
SSL VPN tunnel mode 1420
SSL VPN web mode for remote user 1427
SSL VPN authentication 1431
SSL VPN to IPsec VPN 1513
SSL VPN protocols 1523
SSL VPN troubleshooting 1524
User & Authentication 1528
Endpoint control and compliance 1528
Per-policy disclaimer messages 1528
FortiOS 6.4.2 Administration Guide 12
Fortinet Inc.
Compliance 1530
FortiGuard distribution of updated Apple certificates 1535
User Definition 1536
User types 1537
Removing a user 1537
User Groups 1538
Configuring POP3 authentication 1538
Guest Management 1539
Configuring guest access 1539
Retail environment guest access 1541
LDAP Servers 1542
Configuring an LDAP server 1542
FSSO polling connector agent installation 1544
Enabling Active Directory recursive search 1548
Configuring LDAP dial-in using a member attribute 1549
Configuring wildcard admin accounts 1550
Configuring least privileges for LDAP admin account authentication in Active
Directory 1552
RADIUS Servers 1553
Configuring RADIUS SSO authentication 1553
RSA ACE (SecurID) servers 1559
Support for Okta RADIUS attributes filter-Id and class 1564
Send multiple RADIUS attribute values in a single RADIUS Access-Request 1566
TACACS+ servers 1566
SAML 1568
Outbound firewall authentication for a SAML user 1568
SAML SP for VPN authentication 1570
Authentication Settings 1572
FortiTokens 1573
FortiToken Mobile Quick Start Guide 1575
FortiToken Cloud 1586
Registering hard tokens 1587
Managing FortiTokens 1589
FortiToken Mobile Push 1591
Troubleshooting and diagnosis 1593
Configuring the maximum log in attempts and lockout period 1596
PKI 1597
Creating a PKI/peer user 1597
Configuring firewall authentication 1597
Creating a locally authenticated user account 1598
Creating a RADIUS-authenticated user account 1599
Creating an FSSO user group 1599
Creating a firewall user group 1601
Defining policy addresses 1602
Creating security policies 1602
FortiOS 6.4.2 Administration Guide 13
Fortinet Inc.
Wireless configuration 1605
Switch Controller 1606
FortiLink setup 1606
Viewing managed FortiSwitches 1608
Register FortiSwitch to FortiCloud 1610
VLAN interface templates for FortiSwitches 1613
Create VLAN interface templates 1614
Example 1615
FortiLink auto network configuration policy 1617
FortiLink network sniffer extension 1618
FortiLink MCLAG configuration 1620
Allow FortiSwitch Trunk mode selection on FortiGate 1621
Standalone FortiGate as switch controller 1622
Standalone FortiGate as switch controller 1622
Multiple FortiSwitches managed via hardware/software switch 1625
Multiple FortiSwitches in tiers via aggregate interface with redundant link enabled 1629
Multiple FortiSwitches in tiers via aggregate interface with MCLAG enabled only on
distribution 1633
HA (A-P) mode FortiGate pairs as switch controller 1637
Multiple FortiSwitches managed via hardware/software switch 1637
Multiple FortiSwitches in tiers via aggregate interface with redundant link enabled 1641
Multiple FortiSwitches in tiers via aggregate interface with MCLAG enabled only on
distribution 1646
Multiple FortiSwitches in tiers via aggregate interface with MCLAG enabled on all
tiers 1650
Authentication and security 1655
MAC-based 802.1X authentication 1655
Port-based 802.1X authentication 1658
MAC layer control - Sticky MAC and MAC Learning-limit 1661
Quarantine 1662
Inter-operability with per instance RSTP 802.1w 1667
Flow and device detection 1667
Data statistic 1667
Security Fabric showing 1669
NAC policies on switch ports 1669
EMS tags in NAC policies 1673
Use FortiSwitch to query FortiGuard IoT service for device details 1675
Voice device detection 1676
FortiSwitch multi-tenant support 1680
Persistent MAC learning 1683
Split port mode (for QSFP / QSFP28) 1684
Dynamic VLAN name assignment from RADIUS attribute 1686
MPSK groups 1686
MSTI support 1690
Netflow and IPFIX support 1690
ECN configuration for managed FortiSwitch devices 1692
FortiOS 6.4.2 Administration Guide 14
Fortinet Inc.
PTP transparent clock mode configuration for managed FortiSwitch devices 1693
Log and Report 1695
Viewing event logs 1695
Sample logs by log type 1697
Log buffer on FortiGates with an SSD disk 1715
Checking the email filter log 1718
Supported log types to FortiAnalyzer, syslog, and FortiAnalyzer Cloud 1719
Configuring multiple FortiAnalyzers on a multi-VDOM FortiGate 1720
Checking FortiAnalyzer connectivity 1721
Configuring multiple FortiAnalyzers (or syslog servers) per VDOM 1722
Source and destination UUID logging 1724
Logging the signal-to-noise ratio and signal strength per client 1726
RSSO information for authenticated destination users in logs 1728
Scenario 1 1728
Scenario 2 1729
Scenario 3 1730
Threat weight 1731
Troubleshooting 1732
Log-related diagnose commands 1732
Backing up log files or dumping log messages 1738
SNMP OID for logs that failed to send 1740
VM 1744
Amazon Web Services 1744
Microsoft Azure 1744
Google Cloud Platform 1744
Oracle OCI 1744
AliCloud 1744
Private cloud 1744
VM license 1744
Uploading a license file 1745
Types of VM licenses 1746
CLI troubleshooting 1747
FortiGate multiple connector support 1748
Adding VDOMs with FortiGate v-series 1751
Terraform: FortiOS as a provider 1754
Troubleshooting 1758
PF SR-IOV driver support 1758
Troubleshooting 1760
Troubleshooting methodologies 1760
Verify user permissions 1761
Establish a baseline 1761
Create a troubleshooting plan 1763
Troubleshooting scenarios 1764
Checking the system date and time 1765
Checking the hardware connections 1766
FortiOS 6.4.2 Administration Guide 15
Fortinet Inc.
Checking FortiOS network settings 1767
Troubleshooting CPU and network resources 1770
Troubleshooting high CPU usage 1771
Checking the modem status 1775
Running ping and traceroute 1776
Checking the logs 1780
Verifying routing table contents in NAT mode 1780
Verifying the correct route is being used 1781
Verifying the correct firewall policy is being used 1781
Checking the bridging information in transparent mode 1782
Checking wireless information 1783
Performing a sniffer trace (CLI and packet capture) 1784
Debugging the packet flow 1787
Testing a proxy operation 1790
Displaying detail Hardware NIC information 1790
Performing a traffic trace 1793
Using a session table 1794
Finding object dependencies 1797
Diagnosing NPU-based interfaces 1798
Identifying the XAUI link used for a specific traffic stream 1799
Running the TAC report 1799
Other commands 1800
FortiGuard troubleshooting 1802
Additional resources 1806
Technical documentation 1806
Fortinet video library 1806
Release notes 1806
Knowledge base 1806
Fortinet technical discussion forums 1806
Fortinet training services online campus 1806
Fortinet Support 1806
FortiOS 6.4.2 Administration Guide 16
Fortinet Inc.
Change Log
Change Log
Date Change Description
2020-07-30 Initial release.
2020-08-14 Added Self-originating traffic on page 587.
2020-08-17 Added Outbound firewall authentication for a SAML user on page 1568.
Updated SAML SP for VPN authentication on page 1570.
2020-08-19 Updated FortiAP and FortiSwitch on page 160.
2020-08-20 Updated Cisco ACI SDN connector on page 257 and Nuage SDN connector on
page 261.
2020-08-20 Updated Reliable web filter statistics on page 1062.
2020-08-20 Added Associating a FortiToken to an administrator account on page 710.
2020-08-25 Updated FortiSwitch multi-tenant support on page 1680.
Added Hardware switch on page 404.
2020-08-26 Updated ARP table on page 1800
2020-08-28 Updated FortiTokens on page 1573 and all of its sub-topics.
2020-08-31 Updated Add FortiToken multi-factor authentication on page 1255, SSL VPN best
practices on page 1411, and Set up FortiToken multi-factor authentication on page
1418.
2020-09-02 Updated Encryption algorithms on page 1388.
2020-09-03 Added Link health monitor on page 525.
2020-09-04 Added General IPsec VPN configuration on page 1174.
2020-09-08 Updated Endpoint/Identity connectors on page 283 and Threat feeds on page 296
sections.
2020-09-15 Added Global and per-VDOM resources on page 730.
2020-09-16 Added SSO administrators on page 711 and Threat weight on page 1731.
2020-09-18 Added TLS configuration on page 728.
2020-09-22 Added Multicast on page 493 section.
2020-09-23 Updated SNAT policies with virtual wire pairs on page 857.
2020-09-24 Added Custom languages on page 832.
2020-09-25 Updated SSL VPN best practices on page 1411 and SSL VPN with certificate
authentication on page 1492.
2020-09-29 Updated Introduction to the FGCP cluster on page 752.
FortiOS 6.4.2 Administration Guide 17
Fortinet Inc.
Change Log
Date Change Description
2020-10-02 Added VM license on page 1744, Wifi Dashboard on page 77, FortiAP Status
monitor on page 78, Clients by FortiAP monitor on page 80, FortiView Sessions on
page 107, and Troubleshooting and diagnosis on page 1593.
Updated Using FortiSandbox Cloud with antivirus on page 1023.
2020-10-05 Updated Threat feeds on page 296 and External resources for DNS filter on page
303.
2020-10-13 Added Blocking applications with custom signatures on page 1162.
2020-10-15 Updated Configuring multicast forwarding on page 494 and Content disarm and
reconstruction for antivirus on page 1000.
2020-10-22 Updated Agentless NTLM authentication for web proxy on page 481 , Registration
on page 45, and LLDP reception on page 504.
2020-11-04 Added FortiMail on page 161.
Updated Additional devices on page 163.
2020-11-05 Updated Configuring the root FortiGate and downstream FortiGates on page 131.
2020-11-23 Updated VM license on page 1744.
2021-01-08 Updated FortiGuard outbreak prevention on page 1002.
2021-01-21 Updated Matching multiple parameters on application control signatures on page
1096.
2021-02-17 Updated Antivirus on page 997.
2021-06-03 Udpated Adding FortiView widgets on page 91.
2021-07-13 Added Monitoring the Security Fabric using FortiExplorer for Apple TV on page 363.
2021-08-27 Added QinQ on page 416.
Updated Adding a FortiExtender on page 497.
FortiOS 6.4.2 Administration Guide 18
Fortinet Inc.
Getting started
This section explains how to get started with a FortiGate.
Differences between models
Not all FortiGates have the same features, particularly entry-level models (models 30 to 90). A number of features on
these models are only available in the CLI.
Consult your model's QuickStart Guide, hardware manual, or the Feature / Platform Matrix for
further information about features that vary by model.
FortiGate models differ principally by the names used and the features available:
l Naming conventions may vary between FortiGate models. For example, on some models the hardware switch
interface used for the local area network is called lan, while on other units it is called internal.
l Certain features are not available on all models. Additionally, a particular feature may be available only through the
CLI on some models, while that same feature may be viewed in the GUI on other models.
If you believe your FortiGate model supports a feature that does not appear in the GUI, go to System > Feature
Visibility and confirm that the feature is enabled. For more information, see Feature visibility on page 821.
Using the GUI
This section presents an introduction to the graphical user interface (GUI) on your FortiGate.
The following topics are included in this section:
l Connecting using a web browser
l Menus
l Tables
l Entering values
For information about using the dashboards, see Dashboards and widgets on page 63.
Connecting using a web browser
In order to connect to the GUI using a web browser, an interface must be configured to allow administrative access over
HTTPS or over both HTTPS and HTTP. By default, an interface has already been set up that allows HTTPS access with
the IP address 192.168.1.99.
Browse to https://192.168.1.99 and enter your username and password. If you have not changed the admin account’s
password, use the default user name, admin, and leave the password field blank.
FortiOS 6.4.2 Administration Guide 19
Fortinet Inc.
Getting started
The GUI will now be displayed in your browser.
To use a different interface to access the GUI:
1. Go to Network > Interfaces and edit the interface you wish to use for access. Take note of its assigned IP address.
2. In Administrative Access, select HTTPS, and any other protocol you require. You can also select HTTP, although
this is not recommended as the connection will be less secure.
3. Click OK.
4. Browse to the IP address using your chosen protocol.
The GUI will now be displayed in your browser.
Menus
If you believe your FortiGate model supports a menu that does not appear in the GUI, go to
System > Feature Visibility and ensure the feature is enabled. For more information, see
Feature visibility on page 821.
The GUI contains the following main menus, which provide access to configuration options for most FortiOS features:
Dashboard The dashboard displays various widgets that display important system
information and allow you to configure some system options.
For more information, see Dashboards and widgets on page 63.
Security Fabric Access the physical topology, logical topology, automation, and settings of the
Fortinet Security Fabric.
For more information, see Fortinet Security Fabric on page 128.
Network Options for networking, including configuring system interfaces and routing
options.
For more information, see Network on page 382.
System Configure system settings, such as administrators, FortiGuard, and certificates.
For more information, see System on page 702.
Policy & Objects Configure firewall policies, protocol options, and supporting content for policies,
including schedules, firewall addresses, and traffic shapers.
For more information, see Policy and Objects on page 834.
Security Profiles Configure your FortiGate's security features, including Antivirus, Web Filter, and
Application Control.
For more information, see Security Profiles on page 992.
VPN Configure options for IPsec and SSL virtual private networks (VPNs).
For more information, see IPsec VPNs on page 1174 and SSL VPN on page
1410.
User & Authetication Configure user accounts, groups, and authentication methods, including external
authentication and single sign-on (SSO).
FortiOS 6.4.2 Administration Guide 20
Fortinet Inc.
Getting started
WiFi & Switch Controller Configure the unit to act as a wireless network controller, managing the wireless
Access Point (AP) functionality of FortiWiFi and FortiAP units.
On certain FortiGate models, this menu has additional features allowing for
FortiSwitch units to be managed by the FortiGate.
For more information, see Wireless configuration on page 1605 and Switch
Controller on page 1606.
Log & Report Configure logging and alert email as well as reports.
For more information, see Log and Report on page 1695.
Tables
Many GUI pages contain tables of information that can be filtered and customized to display specific information in a
specific way. Some tables allow content to be edited directly on that table, or rows to be copied and pasted.
Navigation
Some tables contain information and lists that span multiple pages. Navigation controls will be available at the bottom of
the page.
Filters
Filters are used to locate a specific set of information or content in a table. They can be particularly useful for locating
specific log entries. The filtering options vary, depending on the type of information in the log.
Depending on the table content, filters can be applied using the filter bar, using a column filter, or based on a cell's
content. Some tables allow filtering based on regular expressions.
Administrators with read and write access can define filters. Multiple filters can be applied at one time.
To manually create a filter:
1. Click Add Filter at the top of the table. A list of the fields available for filtering is shown.
2. Select the field to filter by.
3. Enter the value to filter by, adding modifiers as needed.
4. Press Enter to apply the filter.
To create a column filter:
1. Click the filter icon on the right side of the column header
2. Choose a filter type from the available options.
3. Enter the filter text, or select from the available values.
4. Click Apply.
To create a filter based on a cell's content:
1. Right click on a cell in the table.
2. Select a filtering option from the menu.
FortiOS 6.4.2 Administration Guide 21
Fortinet Inc.
Getting started
Column settings
Columns can be rearranged, resized, and added or removed from tables.
To add or remove columns:
1. Right a column header, or click the gear icon on the left side of the header row that appears when hovering the
cursor over the headers.
2. Select columns to add or remove.
3. Click Apply.
To rearrange the columns in a table:
1. Click and drag the column header.
To resize a column:
1. Click and drag the right border of the column header.
To resize a column to fit its contents:
1. Click the dots or filter icon on the right side of the column header and select Resize to Contents.
To resize all of the columns in a table to fit their content:
1. Right a column header, or click the gear icon on the left side of the header row that appears when hovering the
cursor over the headers.
2. Click Best Fit All Columns.
To reset a table to its default view:
1. Right a column header, or click the gear icon on the left side of the header row that appears when hovering the
cursor over the headers.
2. Click Reset Table.
Resetting a table does not remove filters.
Editing objects
In some tables, parts of a configuration can be edited directly in the table. For example, security profiles can be added to
an existing firewall policy by clicking the edit icon in a cell in the Security Profiles column.
Copying rows
In some tables, rows can be copied and pasted using the right-click menu. For example, a policy can be duplicated by
copying and pasting it.
FortiOS 6.4.2 Administration Guide 22
Fortinet Inc.
Getting started
Entering values
Numerous fields in the GUI and CLI require text strings or numbers to be entered when configuring the FortiGate. When
entering values in the GUI, you will be prevented from entering invalid characters, and a warning message will be shown
explaining what values are not allowed. If invalid values are entered in a CLI command, the setting will be rejected when
you apply it.
l Text strings on page 23
l Numbers on page 24
Text strings
Text strings are used to name entities in the FortiGate configuration. For example, the name of a firewall address,
administrator, or interface are all text strings.
The following characters cannot be used in text strings, as they present cross-site scripting (XSS) vulnerabilities:
l “ - double quotes
l ' - single quote
l > - greater than
l < - less than
Most GUI text fields prevent XSS vulnerable characters from being added.
VDOM names and hostnames can only use numbers (0-9), letters (a-z and A-Z), dashes, and
underscores.
The tree CLI command can be used to view the number of characters allowed in a name field. For example, entering
the following commands show that a firewall address name can contain up to 80 characters, while its FQDN can contain
256 characters:
config fire address
(address) # tree
-- [address] --*name (80)
|- uuid
|- subnet
|- type
|- start-mac
|- end-mac
|- start-ip
|- end-ip
|- fqdn (256)
|- country (3)
|- wildcard-fqdn (256)
|- cache-ttl (0,86400)
|- wildcard
|- sdn (36)
|- interface (36)
|- tenant (36)
|- organization (36)
|- epg-name (256)
|- subnet-name (256)
FortiOS 6.4.2 Administration Guide 23
Fortinet Inc.
Getting started
|- sdn-tag (16)
|- policy-group (16)
|- comment
|- visibility
|- associated-interface (36)
|- color (0,32)
|- filter
|- sdn-addr-type
|- obj-id
|- [list] --*ip (36)
|- obj-id (128)
+- net-id (128)
|- [tagging] --*name (64)
|- category (64)
+- [tags] --*name (80)
+- allow-routing
Numbers
Numbers are used to set sizes, rated, addresses, port numbers, priorities, and other such numeric values. They can be
entered as a series of digits (without commas or spaces), in a dotted decimal format (such as IP addresses), or
separated by colons (such as MAC addresses). Most numeric values use base 10 numbers, while some use
hexadecimal values.
Most GUI and CLI fields prevent invalid numbers from being entered. The CLI help text includes information about the
range of values allowed for applicable settings.
Using the CLI
The Command Line Interface (CLI) can be used in lieu of the GUI to configure the FortiGate. Some settings are not
available in the GUI, and can only be accessed using the CLI.
This section briefly explains basic CLI usage. For more information about the CLI, see the FortiOS CLI Reference.
l Connecting to the CLI on page 24
l CLI basics on page 27
l Command syntax on page 33
l Subcommands on page 36
l Permissions on page 38
Connecting to the CLI
You can connect to the CLI using a direct console connection, SSH, the FortiExplorer app on your iOS device, or the CLI
console in the GUI.
You can access the CLI outside of the GUI in three ways:
l Console connection: Connect your computer directly to the console port of your FortiGate.
l SSH access: Connect your computer through any network interface attached to one of the network ports on your
FortiGate.
FortiOS 6.4.2 Administration Guide 24
Fortinet Inc.
Getting started
l FortiExplorer: Connect your device to the FortiExplorer app on your iOS device to configure, manage, and monitor
your FortiGate. See FortiExplorer for iOS on page 38 for details.
To open a CLI console, click the icon in the top right corner of the GUI. The console opens on top of the GUI. It can be
minimized and multiple consoles can be opened.
To edit policies and objects directly in the CLI, right-click on the element and select Edit in CLI.
Console connection
A direct console connections to the CLI is created by directly connecting your management computer or console to the
FortiGate unit, using its DB-9 or RJ-45 console port.
Direct console access to the FortiGate may be required if:
l You are installing the FortiGate for the first time and it is not configured to connect to your network.
l You are restoring the firmware using a boot interrupt. Network access to the CLI will not be available until after the
boot process has completed, making direct console access the only option.
To connect to the FortiGate console, you need:
l A console cable to connect the console port on the FortiGate to a communications port on the computer. Depending
on your device, this is one of:
l null modem cable (DB-9 to DB-9)
l DB-9 to RJ-45 cable (a DB-9-to-USB adapter can be used)
l USB to RJ-45 cable
l A computer with an available communications port
l Terminal emulation software
To connect to the CLI using a direct console connection:
1. Using the console cable, connect the FortiGate unit’s console port to the serial communications (COM) port on your
management computer.
2. Start a terminal emulation program on the management computer, select the COM port, and use the following
settings:
Bits per second 9600
Data bits 8
Parity None
Stop bits 1
Flow control None
3. Press Enter on the keyboard to connect to the CLI.
4. Log in to the CLI using your username and password (default: admin and no password).
You can now enter CLI commands, including configuring access to the CLI through SSH.
SSH access
SSH access to the CLI is accomplished by connecting your computer to the FortiGate unit using one of its network ports.
You can either connect directly, using a peer connection between the two, or through any intermediary network.
FortiOS 6.4.2 Administration Guide 25
Fortinet Inc.
Getting started
If you do not want to use an SSH client and you have access to the GUI, you can access the
CLI through the network using the CLI console in the GUI.
SSH must be enabled on the network interface that is associated with the physical network port that is used.
If your computer is not connected either directly or through a switch to the FortiGate, you must also configure the
FortiGate with a static route to a router that can forward packets from the FortiGate to the computer. This can be done
using a local console connection, or in the GUI.
To connect to the FortiGate CLI using SSH, you need:
l A computer with an available serial communications (COM) port and RJ-45 port
l An appropriate console cable
l Terminal emulation software
l A network cable
l Prior configuration of the operating mode, network interface, and static route.
To enable SSH access to the CLI using a local console connection:
1. Using the network cable, connect the FortiGate unit’s port either directly to your computer’s network port, or to a
network through which your computer can reach the FortiGate unit.
2. Note the number of the physical network port.
3. Using direct console connection, connect and log into the CLI.
4. Enter the following command:
config system interface
edit <interface_str>
append allowaccess ssh
next
end
Where <interface_str> is the name of the network interface associated with the physical network port, such as
port1.
5. Confirm the configuration using the following command to show the interface’s settings:
show system interface <interface_str>
For example:
show system interface port1
config system interface
edit "port1"
set vdom "root"
set ip 192.168.1.99 255.255.255.0
set allowaccess ping https ssh
set type hard-switch
set stp enable
set role lan
set snmp-index 6
next
end
FortiOS 6.4.2 Administration Guide 26
Fortinet Inc.
Getting started
Connecting using SSH
Once the FortiGate unit is configured to accept SSH connections, use an SSH client on your management computer to
connect to the CLI.
The following instructions use PuTTy. The steps may vary in other terminal emulators.
To connect to the CLI using SSH:
1. On your management computer, start PuTTy.
2. In the Host Name (or IP address) field, enter the IP address of the network interface that you are connected to and
that has SSH access enabled.
3. Set the port number to 22, if it is not set automatically.
4. Select SSH for the Connection type.
5. Click Open. The SSH client connect to the FortiGate.
The SSH client may display a warning if this is the first time that you are connecting to the FortiGate and its SSH key
is not yet recognized by the SSH client, or if you previously connected to the FortiGate using a different IP address
or SSH key. This is normal if the management computer is connected directly to the FortiGate with no network hosts
in between.
6. Click Yes to accept the FortiGate unit's SSH key.
The CLI displays the log in prompt.
7. Enter a valid administrator account name, such as admin, then press Enter.
8. Enter the administrator account password, then press Enter.
The CLI console shows the command prompt (FortiGate hostname followed by a #). You can now enter
CLI commands.
If three incorrect log in or password attempts occur in a row, you will be disconnected. If this
occurs, wait for one minute, then reconnect and attempt to log in again.
CLI basics
Basic features and characteristics of the CLI environment provide support and ease of use for many CLI tasks.
Help
Press the question mark (?) key to display command help and complete commands.
l Press the question mark (?) key at the command prompt to display a list of the commands available and a
description of each command.
l Enter a command followed by a space and press the question mark (?) key to display a list of the options available
for that command and a description of each option.
l Enter a command followed by an option and press the question mark (?) key to display a list of additional options
available for that command option combination and a description of each option.
l Enter a question mark after entering a portion of a command to see a list of valid complete commands and their
descriptions. If there is only one valid command, it will be automatically filled in.
FortiOS 6.4.2 Administration Guide 27
Fortinet Inc.
Getting started
Shortcuts and key commands
Shortcut key Action
? List valid complete or subsequent commands.
If multiple commands can complete the command, they are listed with their
descriptions.
Tab Complete the word with the next available match.
Press multiple times to cycle through available matches.
Up arrow or Ctrl + P Recall the previous command.
Command memory is limited to the current session.
Down arrow, or Ctrl + N Recall the next command.
Left or Right arrow Move the cursor left or right within the command line.
Ctrl + A Move the cursor to the beginning of the command line.
Ctrl + E Move the cursor to the end of the command line.
Ctrl + B Move the cursor backwards one word.
Ctrl + F Move the cursor forwards one word.
Ctrl + D Delete the current character.
Ctrl + C Abort current interactive commands, such as when entering multiple lines.
If you are not currently within an interactive command such as config or edit,
this closes the CLI connection.
\ then Enter Continue typing a command on the next line for a multiline command.
For each line that you want to continue, terminate it with a backslash ( \ ). To
complete the command, enter a space instead of a backslash, and then press
Enter.
Command tree
Enter tree to display the CLI command tree. To capture the full output, connect to your device using a terminal
emulation program and capture the output to a log file. For some commands, use the tree command to view all
available variables and subcommands.
Command abbreviation
You can abbreviate words in the command line to their smallest number of non-ambiguous characters.
For example, the command get system status could be abbreviated to g sy stat.
Adding and removing options from lists
When configuring a list, the set command will remove the previous configuration.
FortiOS 6.4.2 Administration Guide 28
Fortinet Inc.
Getting started
For example, if a user group currently includes members A, B, and C, the command set member D will remove
members A, B, and C. To avoid removing the existing members from the group, the command set members A B C D
must be used.
To avoid this issue, the following commands are available:
append Add an option to an existing list.
For example, append member D adds user D to the user group without removing any of the
existing members.
select Clear all of the options except for those specified.
For example, select member B removes all member from the group except for member B.
unselect Remove an option from an existing list.
For example, unselect member C removes only member C from the group, without
affecting the other members.
Environment variables
The following environment variables are support by the CLI. Variable names are case-sensitive.
$USERFROM The management access type (ssh, jsconsole, and so on) and the IPv4 address of the
administrator that configured the item.
$USERNAME The account name of the administrator that configured the item.
$SerialNum The serial number of the FortiGate unit.
For example, to set a FortiGate device's host name to its serial number, use the following CLI command:
config system global
set hostname $SerialNum
end
Special characters
The following characters cannot be used in most CLI commands: <, >, (, ), #, ', and "
If one of those characters, or a space, needs to be entered as part of a string, it can be entered by using a special
command, enclosing the entire string in quotes, or preceding it with an escape character (backslash, \).
To enter a question mark (?) or a tab, Ctrl + V or Ctrl + Shift + - must be entered first.
Question marks and tabs cannot be copied into the CLI Console or some SSH clients. They
must be types in.
Character Keys
? Ctrl + V or Ctrl + Shift + - then ?
FortiOS 6.4.2 Administration Guide 29
Fortinet Inc.
Getting started
Character Keys
Tab Ctrl + V then Tab
Space Enclose the string in single or double quotation marks: "Security
(as part of a string value, not to end the string) Administrator”. or 'Security Administrator'.
Precede the space with a backslash: Security\ Administrator.
' \'
(as part of a string value, not to begin or end
the string)
" \"
(as part of a string value, not to begin or end
the string)
\ \\
Using grep to filter command output
The get, show, and diagnose commands can produce large amounts of output. The grep command can be used to
filter the output so that it only shows the required information.
The grep command is based on the standard UNIX grep, used for searching text output based on regular expressions.
For example, the following command displays the MAC address of the internal interface:
get hardware nic internal | grep Current_HWaddr
Current_HWaddr 00:09:0f:cb:c2:75
The following command will display all TCP sessions that are in the session list, including the session list line number in
the output:
get system session list | grep -n tcp
The following command will display all of the lines in the HTTP replacement message that contain URL or url:
show system replacemsg http | grep -i url
The following options can also be used:
-A <num> After
-B <num> Before
-C <num> Context
The -f option is available to support contextual output, in order to show the complete configuration. The following
example shows the difference in the output when -f is used versus when it is not used:
Without -f: With -f:
show | grep ldap-group1 show | grep -f ldap-group1
edit "ldap-group1" config user group
set groups "ldap-group1" edit "ldap-group1"
set member "pc40-LDAP"
next
end
config firewall policy
FortiOS 6.4.2 Administration Guide 30
Fortinet Inc.
Getting started
edit 2
set srcintf "port31"
set dstintf "port32"
set srcaddr "all"
set action accept
set identity-based enable
set nat enable
config identity-based-policy
edit 1
set schedule "always"
set groups "ldap-group1"
set dstaddr "all"
set service "ALL"
next
end
next
end
Language support and regular expressions
Characters such as ñ and é, symbols, and ideographs are sometimes acceptable input. Support varies depending on the
type of item that is being configured. CLI commands, objects, field names, and options must use their exact ASCII
characters, but some items with arbitrary names or values can be input using your language of choice. To use other
languages in those cases, the correct encoding must be used.
Input is stored using Unicode UTF-8 encoding, but is not normalized from other encodings into UTF-8 before it is stored.
If your input method encodes some characters differently than in UTF-8, configured items may not display or operate as
expected.
Regular expressions are especially impacted. Matching uses the UTF-8 character values. If you enter a regular
expression using a different encoding, or if an HTTP client sends a request in a different encoding, matches may not be
what is expected.
For example, with Shift-JIS, backslashes could be inadvertently interpreted as the symbol for the Japanese yen ( ¥ ), and
vice versa. A regular expression intended to match HTTP requests containing monetary values with a yen symbol may
not work it if the symbol is entered using the wrong encoding.
For best results:
l use UTF-8 encoding, or
l use only characters whose numerically encoded values are the same in UTF-8, such as the US-ASCII characters
that are encoded using the same values in ISO 8859-1, Windows code page 1252, Shift-JIS, and other encoding
methods, or
l for regular expressions that must match HTTP requests, use the same encoding as your HTTP clients.
HTTP clients may send requests in encodings other than UTF-8. Encodings usually vary
based on the client’s operating system or input language. If the client's encoding method
cannot be predicted, you might only be able to match the parts of the request that are in
English, as the values for English characters tend to be encoded identically, regardless of the
encoding method.
FortiOS 6.4.2 Administration Guide 31
Fortinet Inc.
Getting started
If the FortiGate is configured to use an encoding method other than UTF-8, the management computer's language may
need to be changed, including the web browse and terminal emulator. If the FortiGate is configured using non-ASCII
characters, all the systems that interact with the FortiGate must also support the same encoding method. If possible, the
same encoding method should be used throughout the configuration to avoid needing to change the language settings
on the management computer.
The GUI and CLI client normally interpret output as encoded using UTF-8. If they do not, configured items may not
display correctly. Exceptions include items such as regular expression that may be configured using other encodings to
match the encoding of HTTP requests that the FortiGate receives.
To enter non-ASCII characters in a terminal emulator:
1. On the management computer, start the terminal client.
2. Configure the client to send and receive characters using UTF-8 encoding.
Support for sending and receiving international characters varies by terminal client.
3. Log in to the FortiGate unit.
4. At the command prompt, type your command and press Enter.
Words that use encoded characters may need to be enclosed in single quotes ( ' ).
Depending on your terminal client’s language support, you may need to interpret the characters into character
codes before pressing Enter. For example, you might need to enter: edit '\743\601\613\743\601\652'
5. The CLI displays the command and its output.
Screen paging
By default, the CLI will pause after displaying each page worth of text when a command has multiple pages of output.
this can be useful when viewing lengthy outputs that might exceed the buffer of terminal emulator.
When the display pauses and shows --More--, you can:
l Press Enter to show the next line,
l Press Q to stop showing results and return to the command prompt,
l Press an arrow key, Insert, Home, Delete, End, Page Up, or Page Down to show the next few pages,
l Press any other key to show the next page, or
l Wait for about 30 seconds for the console to truncate the output and return to the command prompt.
When pausing the screen is disable, press Ctrl + C to stop the output and log out of the FortiGate.
To disable pausing the CLI output:
config system console
set output standard
end
To enable pausing the CLI output:
config system console
set output more
end
FortiOS 6.4.2 Administration Guide 32
Fortinet Inc.
Getting started
Changing the baud rate
The baud rate of the local console connection can be changed from its default value of 9600.
To change the baud rate:
config system console
set baudrate {9600 | 19200 | 38400 | 57600 | 115200}
end
Editing the configuration file
The FortiGate configuration file can be edited on an external host by backing up the configuration, editing the
configuration file, and then restoring the configuration to the FortiGate.
Editing the configuration file can save time is many changes need to be made, particularly if the plain text editor that you
are using provides features such as batch changes.
To edit the configuration file:
1. Backup the configuration. See Configuration backups on page 53 for details.
2. Open the configuration file in a plain text editor that supports UNIX-style line endings.
3. Edit the file as needed.
Do not edit the first line of the configuration file.
This line contains information about the firmware version and FortiGate model. If you
change the model number, the FortiGate unit will reject the configuration when you attempt
to restore it.
4. Restore the modified configuration to the FortiGate. See Configuration backups on page 53 for details.
The FortiGate downloads the configuration file and checks that the model information is correct. If it is correct, the
configuration file is loaded and each line is checked for errors. If a command is invalid, that command is ignored. If
the configuration file is valid, the FortiGate restarts and loads the downloaded configuration.
Command syntax
When entering a command, the CLI console requires that you use valid syntax and conform to expected input
constraints. It rejects invalid commands. Indentation is used to indicate the levels of nested commands.
Each command line consists of a command word, usually followed by configuration data or a specific item that the
command uses or affects.
Notation
Brackets, vertical bars, and spaces are used to denote valid syntax. Constraint notations, such as <address_ipv4>,
indicate which data types or string patterns are acceptable value input.
All syntax uses the following conventions:
FortiOS 6.4.2 Administration Guide 33
Fortinet Inc.
Getting started
Angle brackets < > Indicate a variable of the specified data type.
Curly brackets { } Indicate that a variable or variables are mandatory.
Square brackets [ ] Indicate that the variable or variables are optional.
For example:
show system interface [<name_str>]
To show the settings for all interfaces, you can enter show system interface
To show the settings for the Port1 interface, you can enter show system interface
port1.
Vertical bar | A vertical bar separates alternative, mutually exclusive options.
For example:
set protocol {ftp | sftp}
You can enter either set protocol ftp or set protocol sftp.
Space A space separates non-mutually exclusive options.
For example:
set allowaccess {ping https ssh snmp http fgfm radius-acct probe-
response capwap ftm}
You can enter any of the following:
set allowaccess ping
set allowaccess https ping ssh
set allowaccess http https snmp ssh ping
In most cases, to make changes to lists that contain options separated by spaces, you need to
retype the entire list, including all the options that you want to apply and excluding all the
options that you want to remove.
Optional values and ranges
Any field that is optional will use square-brackets. The overall config command will still be valid whether or not the option
is configured.
Square-brackets can be used is to show that multiple options can be set, even intermixed with ranges. The following
example shows a field that can be set to either a specific value or range, or multiple instances:
config firewall service custom
set iprange <range1> [<range2> <range3> ...]
end
next
The next command is used to maintain a hierarchy and flow to CLI commands. It is at the same indentation level as the
preceding edit command, to mark where a table entry finishes.
The following example shows the next command used in the subcommand entries:
FortiOS 6.4.2 Administration Guide 34
Fortinet Inc.
Getting started
After configuring table entry <2> then entering next, the <2> table entry is saved and the console returns to the
entries prompt:
You can now create more table entries as needed, or enter end to save the table and return to the filepattern table
element prompt.
end
The end command is used to maintain a hierarchy and flow to CLI commands.
The following example shows the same command and subcommand as the next command example, except end has
been entered instead of next after the subcommand:
Entering end will save the <2> table entry and the table, and exit the entries subcommand entirely. The console
returns to the filepattern table element prompt:
FortiOS 6.4.2 Administration Guide 35
Fortinet Inc.
Getting started
Subcommands
Subcommands are available from within the scope of some commands. When you enter a subcommand level, the
command prompt changes to indicate the name of the current command scope. For example, after entering:
config system admin
the command prompt becomes:
(admin)#
Applicable subcommands are available until you exit the command, or descend an additional level into another
subcommand. Subcommand scope is indicated by indentation.
For example, the edit subcommand is only available in commands that affects tables, and the next subcommand is
available only in the edit subcommand:
config system interface
edit port1
set status up
next
end
The available subcommands vary by command. From a command prompt under the config command, subcommands
that affect tables and fields could be available.
Table subcommands
edit <table_row> Create or edit a table value.
In objects such as security policies, <table_row> is a sequence number. To
create a new table entry without accidentally editing an existing entry, enter edit
0. The CLI will confirm that creation of entry 0, but will assign the next unused
number when the entry is saved after entering end or next.
For example, to create a new firewall policy, enter the following commands:
config firewall policy
edit 0
....
next
end
To edit an existing policy, enter the following commands:
config firewall policy
edit 27
....
next
end
The edit subcommand changes the command prompt to the name of the table
value that is being edited.
delete <table_row> Delete a table value.
For example, to delete firewall policy 30, enter the following commands:
config firewall policy
delete 30
end
FortiOS 6.4.2 Administration Guide 36
Fortinet Inc.
Getting started
purge Clear all table values.
The purge command cannot be undone. To restore purged table values, the
configuration must be restored from a backup.
move Move an ordered table value.
In the firewall policy table, this equivalent to dragging a policy into a new position.
It does not change the policy's ID number.
For example, to move policy 27 to policy 30, enter the following commands:
config firewall policy
move 27 to 30
end
The move subcommand is only available in tables where the order of the table
entries matters.
clone <table_row> to <table_ Make a clone of a table entry.
row> For example, to create firewall policy 30 as a clone of policy 27, enter the following
commands:
config firewall policy
clone 27 to 30
end
The clone subcommand may not be available for all tables.
rename <table_row> to Rename a table entry.
<table_row> For example to rename an administrator from Flank to Frank, enter the following
commands:
config system admin
rename Flank to Frank
end
The rename subcommand is only available in tables where the entries can be
renamed.
get List the current table entries.
For example, to view the existing firewall policy table entries, enter the following
commands:
config firewall policy
get
show Show the configuration. Only table entries that are not set to default values are
shown.
end Save the configuration and exit the current config command.
Purging the system interface or system admin tables does not reset default table
values. This can result in being unable to connect to or log in to the FortiGate, requiring the
FortiGate to be formatted and restored.
Field subcommands
set <field> <value> Modify the value of a field.
FortiOS 6.4.2 Administration Guide 37
Fortinet Inc.
Getting started
For example, the command set fsso enable sets the fsso field to the value
enable.
unset Set the field to its default value.
select Clear all of the options except for those specified.
For example, if a group contains members A, B, C, and D, to remove all members
except for B, use the command select member B.
unselect Remove an option from an existing list.
For example, if a group contains members A, B, C, and D, to remove only member
B, use the command unselect member B.
append Add an option to an existing multi-option table value.
clear Clear all the options from a multi-option table value.
get List the configuration of the current table entry, including default and customized
values.
show Show the configuration. Only values that are not set to default values are shown.
next Save changes to the table entry and exit the edit command so that you can
configure the next table entry.
abort Exit the command without saving.
end Save the configuration and exit the current config command.
Permissions
Administrator, or access, profiles control what CLI commands an administrator can access by assigning read, write, or
no access to each are of FortiOS. For information, see Administrator profiles on page 704.
Read access is required to view configurations. Write access is required to make configuration changes. Depending on
your account's profile, you may not have access to all CLI commands. To have access to all CLI commands, an
administrator account with the super_admin profile must be used, such as the admin account.
Accounts assigned the super_admin profile are similar to the root administrator account. They have full permission to
view and change all FortiGate configuration options, including viewing and changing other administrator accounts.
To increase account security, set strong passwords for all administrator accounts, and change the passwords regularly.
FortiExplorer for iOS
FortiExplorer for iOS is a user-friendly application that helps you to rapidly provision, deploy, and monitor Security Fabric
components from your iOS device.
FortiOS 6.4.2 Administration Guide 38
Fortinet Inc.
Getting started
FortiExplorer for iOS requires iOS 10.0 or later and is compatible with iPhone, iPad, and Apple TV. It is supported by
FortiOS 5.6 and later, and is only available on the App Store for iOS devices.
Advanced features are available with the purchase of FortiExplorer Pro. Paid features include the ability to add more
than two devices and the ability to download firmware images from FortiCare.
Up to six members can use this app with 'Family Sharing' enabled in the App Store.
Getting started with FortiExplorer
If your FortiGate is accessible on a wireless network, you can connect to it using FortiExplorer provided that your
iOS device is on the same network (see Connecting FortiExplorer to a FortiGate via WiFi). Otherwise, you will need to
physically connect your iOS device to the FortiGate using a USB cable.
To connect and configure a FortiGate with FortiExplorer using a USB connection:
1. Connect your iOS device to your FortiGate USB A port. If prompted on your iOS device, Trust this computer.
2. Open FortiExplorer and select your FortiGate from the FortiGate Devices list . A blue USB icon will indicate that you
are connected over a USB connection.
3. On the Login screen, select USB.
4. Enter the default Username (admin) and leave the Password field blank.
5. Optionally, select Remember Password.
6. Tap Done when you are ready.
FortiExplorer opens the FortiGate management interface to the Device Status page:
FortiOS 6.4.2 Administration Guide 39
Fortinet Inc.
Getting started
7. Go to Network > Interfaces and configure the WAN interface or interfaces.
8. The wan1 interface Address mode is set to DHCP by default. Set it to Manual and enter its Address, Netmask, and
Default Gateway, and then Apply your changes.
9. Optionally, configure Administrative Access to allow HTTPS access. This will allow administrators to access the
FortiGate GUI using a web browser.
FortiOS 6.4.2 Administration Guide 40
Fortinet Inc.
Getting started
10. Go to Network > Interfaces and configure the local network (internal) interface.
11. Set the Address mode as before and configure Administrative Access if required.
12. Configure a DHCP Server for the internal network subnet.
13. Return to the internal interface using the < button at the top of the screen.
14. Go to Network > Static Routes and configure the static route to the gateway.
15. Go to Policy & Objects > Firewall Policy and edit the Internet access policy. Enter a Name for the policy, enable the
required Security Profiles, configure Logging Options, then tap OK.
FortiOS 6.4.2 Administration Guide 41
Fortinet Inc.
Getting started
Connecting FortiExplorer to a FortiGate via WiFi
You can wirelessly connect to the FortiGate if your iOS device and the FortiGate are both connected to the same
wireless network.
FortiOS 6.4.2 Administration Guide 42
Fortinet Inc.
Getting started
To connect and configure a FortiGate with FortiExplorer wirelessly:
1. Open the FortiExplorer app and tap Add on the Devices page.
2. On the Add Device By page, tap HTTPS.
3. Enter the Host information, Username, and Password.
4. If required, change the default Port number, and optionally enable Remember Password.
5. Tap Done.
6. If the FortiGate device identity cannot be verified, tap Connect at the prompt.
FortiExplorer opens the FortiGate management interface to the Device Status page.
Running a security rating
After configuring your network, run a security rating check to identify vulnerabilities and highlight best practices that
could improve your network's security and performance.
FortiOS 6.4.2 Administration Guide 43
Fortinet Inc.
Getting started
Go to Security Fabric > Security Rating and follow the steps to determine the score. See Security rating on page 214 for
more information.
Upgrading to FortiExplorer Pro
FortiExplorer Pro includes the option to add more than two devices and download firmware images from FortiCare.
To upgrade to FortiExplorer Pro:
1. In FortiExplorer, go to Settings.
2. Tap Upgrade to FortiExplorer Pro.
3. Follow the on-screen prompts.
Basic administration
This section contains information about basic FortiGate administration that you can do after you installing the unit in your
network.
l Registration on page 45
l FortiCare and FortiGate Cloud login on page 48
l Transfer a device to another FortiCloud account on page 51
l Configuration backups on page 53
FortiOS 6.4.2 Administration Guide 44
Fortinet Inc.
Getting started
Registration
The FortiGate, and then its service contract, must be registered to have full access to Fortinet Customer Service and
Support, and FortiGuard services. The FortiGate can be registered in either the FortiGate GUI or the FortiCloud support
portal. The service contract can be registered from the FortiCloud support portal.
The service contract number is needed to complete registrations on the FortiCloud support
portal. You can find this 12-digit number in the email that contains your service registration
document (sent from [email protected]) in the service entitlement summary.
To register your FortiGate in the GUI:
1. Connect to the FortiGate GUI. A message is shown stating that FortiCare registration is required.
2. Click Register Now.
3. If you already have a support account, set Action to Login, and enter the required information.
If you need to create an account, set Action to Create Account, and enter the required information.
FortiOS 6.4.2 Administration Guide 45
Fortinet Inc.
Getting started
FortiOS 6.4.2 Administration Guide 46
Fortinet Inc.
Getting started
4. Click OK.The FortiCare registration agreement is displayed.
5. Agree to the terms of the registration and click OK.
6. Go to System > FortiGuard.
7. In the License Information table, the FortiCare Support status is Registered. There may be a delay before the status
is updated on your FortiGate.
To register the FortiGate on the FortiCloud support portal:
1. Go to support.fortinet.com and log in using your FortiCloud account credentials. If you do not have an account, click
Register to create one.
2. Click Asset > Register/Activate.
3. Enter your product serial number or license certificate number for a VM, select an end user type, then click Next.
4. Enter your support contract number and product description, select a Fortinet partner, then click Next.
5. Read through the service terms and conditions, select the checkbox to accept, then click Next.
6. Verify the product entitlement preview, read through the terms and select the checkbox to accept, then click
Confirm.
FortiOS 6.4.2 Administration Guide 47
Fortinet Inc.
Getting started
7. The Registration Completed page appears where page you can download the license file. Click Register More to
register another FortiGate, or click Finish to complete the registration process.
To register the service contract on the FortiCloud support portal:
1. Go to support.fortinet.com and log in using your FortiCloud account credentials.
2. Click Asset > Register/Activate.
3. Enter your 12-digit contract registration code (service contract number), then click Next.
4. Enter the device serial number or select it from the list, then click Next.
5. Read through the service terms and conditions, select the checkbox to accept, then click Next.
6. Verify the product entitlement preview and associated services, read through the terms and select the checkbox to
accept, then click Confirm.
7. Click Asset > Manage/View Products.
8. Select the device, then click Entitlement in the left menu to view the service entitlement.
FortiCare and FortiGate Cloud login
With FortiCloud, FortiGate supports a unified login to FortiCare and FortiGate Cloud. The FortiGate Cloud setup is a
subset of the FortiCare setup.
l If the FortiGate is not registered, activating FortiGate Cloud will force you to register with FortiCare.
l If a FortiGate is registered in FortiCare using a FortiCloud account, then only that FortiCloud account can be used to
activate FortiGate Cloud.
l If a different FortiCloud account was already used to activate FortiGate Cloud, then a notification asking you to
migrate to FortiCloud is shown in the GUI after upgrading FortiOS.
The CLI can be used to activate FortiGate Cloud without registration, or with a different FortiCloud account.
To activate FortiGate Cloud and register with FortiCare at the same time:
1. Go to Dashboard > Status.
2. In the FortiGate Cloud widget, click Not Activated > Activate.
You must register with FortiCare before activating FortiGate Cloud.
FortiOS 6.4.2 Administration Guide 48
Fortinet Inc.
Getting started
3. Enter your FortiCare Email address and Password.
4. Select your Country/Region and Reseller.
5. Enable Sign in to FortiGate Cloud using the same account.
6. Click OK.
To activate FortiGate Cloud on an already registered FortiGate:
1. Go to Dashboard > Status.
2. In the FortiGate Cloud widget, click Not Activated > Activate.
3. Enter the password for the account that was used to register the FortiGate.
4. Click OK.
The FortiGate Cloud widget now shows the FortiCloud account.
FortiOS 6.4.2 Administration Guide 49
Fortinet Inc.
Getting started
To migrate from the activated FortiGate Cloud account to the registered FortiCloud account:
1. Go to Dashboard > Status.
2. In the FortiGate Cloud widget, click Migrate to FortiCloud.
3. Enter the password for the account that was used to register the FortiGate, then click OK.
The FortiGate Cloud widget now shows the FortiCloud account.
FortiOS 6.4.2 Administration Guide 50
Fortinet Inc.
Getting started
To activate FortiGate Cloud using an account that is not used for registration:
1. In the CLI, enter the following command:
execute fortiguard-log login <account_id> <password>
Where the <account_id> and <password> are the credentials for the account that you are using to activate
FortiGate Cloud.
2. Check the account type with following command:
# diagnose fdsm contract-controller-update
Protocol=2.0|Response=202|Firmware=FAZ-4K-FW-2.50-
100|SerialNumber=FAMS000000000000|Persistent=false|ResponseItem=HomeServer:172.16.95.151
:443*AlterServer:172.16.95.151:443*Contract:20200408*NextRequest:86400*UploadConfig:Fals
e*ManagementMode:Local*ManagementID:737941253*AccountType:multitenancy
Result=Success
A FortiCloud account that is not used for the support portal account cannot be used to register
FortiGate. Attempting to activate FortiGate Cloud with this type of account will fail.
Transfer a device to another FortiCloud account
Master account users can transfer a device from one FortiCloud/FortiCare account to another. Users can transfer a
device up to three times within a twelve-month time period.
Requirements:
To transfer an account, you must:
l Have access to the FortiGate, as well as both the FortiCloud and FortiCare accounts.
l Be a master account user.
To verify you are the master account user, go to support.fortinet.com. Click the user name, then click My Account.
FortiOS 6.4.2 Administration Guide 51
Fortinet Inc.
Getting started
You can transfer a device up to three times in a twelve-month time period. If more transfers are
required within the twelve-month time period, contact Technical Support to request the
transfer.
To transfer an account in the GUI:
1. Go to Dashboard > Status. In the Status dashboard, click on FortiCare Support, and click Transfer FortiGate to
Another Account.
You can also transfer an account from System > FortiGuard.
2. In the Current FortiCloud Account fields, enter the username and password for the current account. In the Target
FortiCloud Account fields, enter the new username and password. Click Next.
FortiGate transfers the account.
FortiOS 6.4.2 Administration Guide 52
Fortinet Inc.
Getting started
After the transfer is complete, FortiGate displays the new the FortiCloud account.
Configuration backups
Once you successfully configure the FortiGate, it is extremely important that you backup the configuration. In some
cases, you may need to reset the FortiGate to factory defaults or perform a TFTP upload of the firmware, which will erase
the existing configuration. In these instances, the configuration on the device will have to be recreated, unless a backup
can be used to restore it. You should also backup the local certificates, as the unique SSL inspection CA and server
certificates that are generated by your FortiGate by default are not saved in a system backup.
We also recommend that you backup the configuration after any changes are made, to ensure you have the most current
configuration available. Also, backup the configuration before any upgrades of the FortiGate’s firmware. Should anything
happen to the configuration during the upgrade, you can easily restore the saved configuration.
Always backup the configuration and store it on the management computer or off-site. You have the option to save the
configuration file to various locations including the local PC, USB key, FTP, and TFTP server. The last two are
configurable through the CLI only.
If you have VDOMs, you can back up the configuration of the entire FortiGate or only a specific VDOM. Note that if you
are using FortiManager or FortiGate Cloud, full backups are performed and the option to backup individual VDOMs will
not appear.
FortiOS 6.4.2 Administration Guide 53
Fortinet Inc.
Getting started
You can also backup and restore your configuration using Secure File Copy (SCP). See How
to download/upload a FortiGate configuration file using secure file copy (SCP).
You enable SCP support using the following command:
config system global
set admin-scp enable
end
For more information about this command and about SCP support, see config system global.
Backing up the configuration
To backup the configuration using the GUI:
1. Click on the user name in the upper right-hand corner of the screen and select Configuration > Backup.
2. Direct the backup to your Local PC or to a USB Disk.
The USB Disk option will not be available if no USB drive is inserted in the USB port. You can also backup to the
FortiManager using the CLI.
3. If VDOMs are enabled, indicate whether the scope of the backup is the entire FortiGate configuration (Global) or
only a specific VDOM configuration (VDOM).
If backing up a VDOM configuration, select the VDOM name from the list.
4. Enable Encryption. Encryption must be enabled on the backup file to back up VPN certificates.
5. Enter a password, and enter it again to confirm it. This password will be required to restore the configuration.
6. Click OK.
7. When prompted, select a location on the PC or USB disk to save the configuration file. The configuration file will
have a .conf extension.
To backup the configuration using the CLI:
Use one of the following commands:
execute backup config management-station <comment>
or:
execute backup config usb <backup_filename> [<backup_password>]
or for FTP, note that port number, username are optional depending on the FTP site:
execute backup config ftp <backup_filename> <ftp_server> [<port>] [<user_name>]
[<password>]
or for TFTP:
execute backup config tftp <backup_filename> <tftp_servers> <password>
Use the same commands to backup a VDOM configuration by first entering the commands:
config vdom
edit <vdom_name>
FortiOS 6.4.2 Administration Guide 54
Fortinet Inc.
Getting started
Restoring a configuration
To restore the FortiGate configuration using the GUI:
1. Click on the user name in the upper right-hand corner of the screen and select Configuration > Restore.
2. Identify the source of the configuration file to be restored: your Local PC or a USB Disk.
The USB Disk option will not be available if no USB drive is inserted in the USB port. You can restore from the
FortiManager using the CLI.
3. Click Upload, locate the configuration file, and click Open.
4. Enter the password if required.
5. Click OK.
To restore the FortiGate configuration using the CLI:
execute restore config management-station normal 0
or:
execute restore config usb <filename> [<password>]
or for FTP, note that port number, username are optional depending on the FTP site:
execute restore config ftp <backup_filename> <ftp_server> [<port>] [<user_name>]
[<password>]
or for TFTP:
execute restore config tftp <backup_filename> <tftp_server> <password>
The FortiGate will load the configuration file and restart. Once the restart has completed, verify that the configuration has
been restored.
Troubleshooting
When restoring a configuration, errors may occur, but the solutions are usually straightforward.
Error message Reason and Solution
Configuration file error This error occurs when attempting to upload a configuration file that is
incompatible with the device. This may be due to the configuration file being for a
different model or being saved from a different version of firmware.
Solution: Upload a configuration file that is for the correct model of FortiGate
device and the correct version of the firmware.
Invalid password When the configuration file is saved, it can be protected by a password. The
password entered during the upload process is not matching the one associated
with the configuration file.
Solution: Use the correct password if the file is password protected.
Configuration revision
You can manage multiple versions of configuration files on models that have a 512MB flash memory and higher.
Revision control requires either a configured central management server or the local hard drive, if your FortiGate has this
feature. Typically, configuration backup to local drive is not available on lower-end models.
FortiOS 6.4.2 Administration Guide 55
Fortinet Inc.
Getting started
The central management server can either be a FortiManager unit or FortiGate Cloud.
If central management is not configured on your FortiGate unit, a message appears instructing you to either
l Enable central management, or
l Obtain a valid license.
When revision control is enabled on your FortiGate unit, and configuration backups have been made, a list of saved
revisions of those backed-up configurations appears.
Configuration revisions are viewed by clicking on the user name in the upper right-hand corner of the screen and
selecting Configuration > Revisions.
Backup and restore the local certificates
This procedure exports a server (local) certificate and private key together as a password protected PKCS12 file. The
export file is created through a customer-supplied TFTP server. Ensure that your TFTP server is running and accessible
to the FortiGate before you enter the command.
To back up the local certificates:
Connect to the CLI and use the following command:
execute vpn certificate local export tftp <cert_name> <filename> <tftp_ip>
where:
l <cert_name> is the name of the server certificate.
l <filename> is a name for the output file.
l <tftp_ip> is the IP address assigned to the TFTP server host interface.
To restore the local certificates using the GUI:
1. Move the output file from the TFTP server location to the management computer.
2. Go to System > Certificates and click Import > Local.
3. Select the certificate type, then click Upload in the Certificate file field.
4. On the management computer, browse to the file location, select it, and click Open.
5. If the Type is Certificate, upload the Key file as well.
6. If required, enter the Password that is required to upload the file or files.
7. Click OK.
To restore the local certificates using the CLI:
Connect to the CLI and use the following command:
execute vpn certificate local import tftp <filename> <tftp_ip>
Restore factory defaults
There may be a need to reset the FortiGate to its original defaults; for example, to begin with a fresh configuration. There
are two options when restoring factory defaults. The first resets the entire device to the original out-of-the-box
configuration.
You can reset the device with the following CLI command:
execute factoryreset
FortiOS 6.4.2 Administration Guide 56
Fortinet Inc.
Getting started
When prompted, type y to confirm the reset.
Alternatively, in the CLI you can reset the factory defaults but retain the interface and VDOM configuration with the
following command:
execute factoryreset2
Troubleshooting your installation
If your FortiGate does not function as desired after installation, try the following troubleshooting tips:
1. Check for equipment issues
Verify that all network equipment is powered on and operating as expected. Refer to the QuickStart Guide for
information about connecting your FortiGate to the network.
2. Check the physical network connections
Check the cables used for all physical connections to ensure that they are fully connected and do not appear
damaged, and make sure that each cable connects to the correct device and the correct Ethernet port on that
device.
3. Verify that you can connect to the internal IP address of the FortiGate
Connect to the GUI from the FortiGate’s internal interface by browsing to its IP address. From the PC, try to ping the
internal interface IP address; for example, ping 192.168.1.99. If you cannot connect to the internal interface,
verify the IP configuration of the PC. If you can ping the interface but can't connect to the GUI, check the settings for
administrative access on that interface. Alternatively, use SSH to connect to the CLI, and then confirm that HTTPS
has been enabled for Administrative Access on the interface.
4. Check the FortiGate interface configurations
Check the configuration of the FortiGate interface connected to the internal network (under Network > Interfaces)
and check that Addressing mode is set to the correct mode.
5. Verify the security policy configuration
Go to Policy & Objects > Firewall Policy and verify that the internal interface to Internet-facing interface security
policy has been added and is located near the top of the policy list. Check the Active Sessions column to ensure that
traffic has been processed (if this column does not appear, right-click on the table header and select Active
Sessions). If you are using NAT mode, check the configuration of the policy to make sure that NAT is enabled and
that Use Outgoing Interface Address is selected.
6. Verify the static routing configuration
Go to Network > Static Routes and verify that the default route is correct. Go to Monitor > Routing Monitor and verify
that the default route appears in the list as a static route. Along with the default route, you should see two routes
shown as Connected, one for each connected FortiGate interface.
7. Verify that you can connect to the Internet-facing interface’s IP address
Ping the IP address of the Internet-facing interface of your FortiGate. If you cannot connect to the interface, the
FortiGate is not allowing sessions from the internal interface to Internet-facing interface. Verify that PING has been
enabled for Administrative Access on the interface.
8. Verify that you can connect to the gateway provided by your ISP
Ping the default gateway IP address from a PC on the internal network. If you cannot reach the gateway, contact
your ISP to verify that you are using the correct gateway.
9. Verify that you can communicate from the FortiGate to the Internet
Access the FortiGate CLI and use the command execute ping 8.8.8.8. You can also use the execute
traceroute 8.8.8.8 command to troubleshoot connectivity to the Internet.
FortiOS 6.4.2 Administration Guide 57
Fortinet Inc.
Getting started
10. Verify the DNS configurations of the FortiGate and the PCs
Check for DNS errors by pinging or using traceroute to connect to a domain name; for example: ping
www.fortinet.com.
If the name cannot be resolved, the FortiGate or PC cannot connect to a DNS server and you should confirm that
the DNS server IP addresses are present and correct.
11. Confirm that the FortiGate can connect to the FortiGuard network
Once the FortiGate is on your network, you should confirm that it can reach the FortiGuard network. First, check the
License Information widget to make sure that the status of all FortiGuard services matches the services that you
have purchased. Go to System > FortiGuard, and, in the Filtering section, click Test Connectivity. After a minute, the
GUI should indicate a successful connection. Verify that your FortiGate can resolve and reach FortiGuard at
service.fortiguard.net by pinging the domain name. If you can reach this service, you can then verify the
connection to FortiGuard servers by running the command diagnose debug rating. This displays a list of
FortiGuard IP gateways you can connect to, as well as the following information:
lWeight: Based on the difference in time zone between the FortiGate and this server
lRTT: Return trip time
l Flags: D (IP returned from DNS), I (Contract server contacted), T (being timed), F (failed)
l TZ: Server time zone
l Curr Lost: Current number of consecutive lost packets
l Total Lost: Total number of lost packets
12. Consider changing the MAC address of your external interface
Some ISPs do not want the MAC address of the device connecting to their network cable to change. If you have
added a FortiGate to your network, you may have to change the MAC address of the Internet-facing interface using
the following CLI command:
config system interface
edit <interface>
set macaddr <xx:xx:xx:xx:xx:xx>
end
end
13. Check the FortiGate bridge table (transparent mode)
When a FortiGate is in transparent mode, the unit acts like a bridge sending all incoming traffic out on the other
interfaces. The bridge is between interfaces on the FortiGate unit. Each bridge listed is a link between interfaces.
Where traffic is flowing between interfaces, you expect to find bridges listed. If you are having connectivity issues
and there are no bridges listed, that is a likely cause. Check for the MAC address of the interface or device in
question.To list the existing bridge instances on the FortiGate, use the following CLI command:
diagnose netlink brctl name host root.b
show bridge control interface root.b host.
fdb: size=2048, used=25, num=25, depth=1
Bridge root.b host table
port no device devname mac addr ttl attributes
3 4 wan1 00:09:0f:cb:c2:77 88
3 4 wan1 00:26:2d:24:b7:d3 0
3 4 wan1 00:13:72:38:72:21 98
4 3 internal 00:1a:a0:2f:bc:c6 6
1 6 dmz 00:09:0f:dc:90:69 0 Local Static
3 4 wan1 c4:2c:03:0d:3a:38 81
3 4 wan1 00:09:0f:15:05:46 89
3 4 wan1 c4:2c:03:1d:1b:10 0
2 5 wan2 00:09:0f:dc:90:68 0 Local Static
FortiOS 6.4.2 Administration Guide 58
Fortinet Inc.
Getting started
14. Use FortiExplorer if you can’t connect to the FortiGate over Ethernet
If you can’t connect to the FortiGate GUI or CLI, you may be able to connect using FortiExplorer. Refer to the
QuickStart Guide or see the section on FortiExplorer for more details.
15. Either reset the FortiGate to factory defaults or contact Fortinet Support for assistance
To reset the FortiGate to factory defaults, use the CLI command execute factoryreset. When prompted, type
y to confirm the reset.
If you require further assistance, visit the Fortinet Support website.
Zero touch provisioning
This section contains instructions for configuring zero touch provisioning:
l Zero touch provisioning with FortiDeploy on page 59
l Zero touch provisioning with FortiManager on page 61
Zero touch provisioning with FortiDeploy
You can use this feature only when the FortiGate boots up from factory reset.
Topology
FortiGate zero touch provisioning workflow
1. Add the FortiGate Cloud product key to the FortiGate Cloud portal so that the FortiGate serial number appears in
the portal.
FortiOS 6.4.2 Administration Guide 59
Fortinet Inc.
Getting started
2. Set up a configuration template with the basic configuration in the FortiGate Cloud portal.
3. Deploy the FortiGate to FortiGate Cloud with that template.
4. Ensure the FortiGate has an interface in default DHCP client mode and is connected to the ISP outlet.
5. Boot the FortiGate in factory reset. The FortiGate gets the DHCP lease so that it can access FortiGate Cloud in the
Internet and join FortiGate Cloud.
The FortiGate Cloud server checks that the FortiGate key is valid and then deploys the FortiGate to FortiGate
Cloud.
To prevent spoofing, FortiGate Cloud invalidates that key after a successful join.
6. Complete zero touch provisioning by obtaining configuration from platform template in the Cloud.
0: set admintimeout 50
0: end
0: config system interface
0: edit "wan1"
0: set allowaccess ping ssh fgfm
0: next
0: edit "port1"
0: set allowaccess ping
0: set ip 1.1.1.1 255.255.255.0
0: next
0: edit "port2"
0: set allowaccess ping
0: set ip 2.2.2.2 255.255.255.0
0: next
0: end
7. The FortiGate Cloud admin can change the template for different configuration requirements and then deploy the
updated template to the FortiGate.
For example, you can add a secondary DNS to the template and deploy it to FortiGate.
FortiOS 6.4.2 Administration Guide 60
Fortinet Inc.
Getting started
Zero touch provisioning with FortiManager
You can use this feature only when the FortiGate boots up from factory reset. This feature is for FortiGate devices that
cannot access the Internet.
A DHCP server includes option 240 and 241 which records FortiManager IP and domain name. FortiGate has an
interface with the default DHCP client mode that is connected to the DHCP server in the intranet.
The FortiManager admin can authorize the FortiGate the specific ADOMs and install specific configurations on the
FortiGate.
In the whole operation, you do not need to do any manual configuration on the FortiGate except connect to the DHCP
server. This is called zero touch deployment.
To prevent spoofing, if a different FortiManager IP comes from the DHCP server later, FortiGate does not change the
central management configuration.
Example of configuring DHCP server with option 240
config system dhcp server
edit 2
set dns-service default
set default-gateway 172.16.200.254
set netmask 255.255.255.0
set interface "wan1"
config ip-range
edit 2
set start-ip 172.16.200.201
set end-ip 172.16.200.209
next
end
set timezone-option default
config options
edit 1
set code 240
set type ip
set ip "172.18.60.115"
next
end
next
end
FortiOS 6.4.2 Administration Guide 61
Fortinet Inc.
Getting started
FortiGate zero touch provisioning workflow
1. Boot the FortiGate in factory reset.
G201E4Q17901047 # diagnose fdsm fmg-auto-discovery-status
dhcp: fmg-ip=0.0.0.0, fmg-domain-name='', config-touched=0
config-touched=0 means no configuration change from the default.
2. When FortiGate boots in factory reset, it gets the DHCP lease including IP, gateway, DNS, and the FortiManager
IP/URL. Central management is automatically configured by using FortiManager IP in option 240.
FG201E4Q17901047 # show system central-management
config system central-management
set type fortimanager
set fmg "172.18.60.115"
end
3. If FortiGate changes from factory reset, you can see it in central management in config-touched=1.
FG201E4Q17901047 # diagnose fdsm fmg-auto-discovery-status
dhcp: fmg-ip=172.18.60.115, fmg-domain-name='', config-touched=1(/bin/dhcpcd)
Example of a spoofing DHCP server with a fake FortiManager IP
config options
edit 1
set code 240
set type ip
set ip "172.18.60.117"
end
After FortiGate reboots and gets DHCP renew, central management will not use the fake FortiManager IP because
config-touched=1 shows that the FortiGate is not in factory reset.
FG201E4Q17901047 # diagnose fdsm fmg-auto-discovery-status
dhcp: fmg-ip=0.0.0.0, fmg-domain-name='', config-touched=1(/bin/dhcpcd)
FG201E4Q17901047 # show system central-management
config system central-management
set type fortimanager
set fmg "172.18.60.115"
end
FortiOS 6.4.2 Administration Guide 62
Fortinet Inc.
Dashboards and widgets
Dashboards and widgets
FortiOS includes predefined dashboards so administrators can easily monitor device inventory, security threats, traffic,
and network health. You can customize the appearance of a default dashboard to display data pertinent to your security
fabric, or combine widgets to create custom dashboards. Many dashboards also allow you to switch views between
fabric devices.
Each dashboard contains a set of widgets and monitors that allow you to view drill down data and take actions to prevent
threats. Use widgets to perform tasks such as viewing device inventory, creating and deleting DHCP reservations, and
disconnecting dial-up users. You can add or remove widgets to a dashboard, or save a widget as a standalone monitor.
This section contains the following topics:
l Using dashboards on page 63
l Using widgets on page 68
l Monitor dashboards and widgets on page 70
l FortiView on page 89
Using dashboards
You can use the dashboard GUI to view fabric devices in the security fabric. You can also combine widgets to create
custom dashboards.
To view downstream fabric devices in the GUI:
1. At the right side of dashboard, click the device dropdown and select a device.
FortiOS 6.4.2 Administration Guide 63
Fortinet Inc.
Dashboards and widgets
The device dropdown is available in the Status, Security, Network, Users & Devices, and
WiFi dashboards. You can also enable the dropdown when you create a dashboard.
To create a new dashboard in the GUI:
1. Under Dashboard, click the Add Dashboard button. The Add Dashboard window opens.
2. Enter a name in the Name field and click OK. The new dashboard opens.
To add a widget to a dashboard in the GUI:
1. In the tree menu, select a dashboard.
2. (Optional) Click the device dropdown, and select a device in the network.
3. In the banner, click Add Widget. The Add Dashboard Widget window opens.
4. Click the Add button next to the widget. You can use the Search field to search for a widget. Click Show More to
view more widgets in a category.
5. Configure the widget settings and click Add Widget.
6. Click Close.
FortiOS 6.4.2 Administration Guide 64
Fortinet Inc.
Dashboards and widgets
To delete a dashboard in the GUI:
1. Click the Actions menu at the right side of the dashboard and selectDelete Dashboard.
2. Click Delete Dashboard . The Confirm window opens.
3. Click OK.
To edit a dashboard in the GUI:
1. Click the Actions menu at the right side of the dashboard and selectEdit Dashboard.
2. Edit the dashboard and click OK.
Viewing device dashboards in the security fabric
Use the device dropdown in the built-in dashboards to quickly navigate between downstream fabric devices. You can
also create dedicated device dashboards devices or log in and configure fabric devices.
To view fabric devices, click the device dropdown at the right side of the page, and select a device from the list.
FortiOS 6.4.2 Administration Guide 65
Fortinet Inc.
Dashboards and widgets
The device dropdown is available in the Status, Security, Network, Users & Devices, and WiFi
dashboards. You can also enable the dropdown when you create a dashboard.
To log into a device from the device dropdown:
1. Hover over the device in the dropdown, and click Login You are redirected to the device login page or System
dashboard if you are already logged in.
To configure a device from the device dropdown:
1. Hover over the device in the dropdown, and click Configure. The Configure page opens.
Creating a fabric system and license dashboard
Create a dashboard summary page to monitor all the fabric devices in a single view. You can use the dashboard to
monitor aspects of the devices such as system information, VPN, and routing.
FortiOS 6.4.2 Administration Guide 66
Fortinet Inc.
Dashboards and widgets
To create a system dashboard in the GUI:
1. Click the Add Dashboard button. The Add Dashboard window opens.
2. In the Name field, enter a name such as Fabric System & License, and click OK. The new dashboard appears.
3. In the banner, click Add Widget. The Add Dashboard Widget window opens. You can use the Search field to search
for a specific widget (for example, License Status, System Information, and Memory Usage).
4. Click the Add button next to widget. The Add Dashboard Widget window opens.
5. In the Fabric member area, select Specify and select a device in the security fabric.
6. Click Add Widget. The widget is added to the dashboard.
Repeat this step for all the devices you want to view in the dashboard.
7. (Optional) Arrange the widgets in the dashboard by fabric device.
FortiOS 6.4.2 Administration Guide 67
Fortinet Inc.
Dashboards and widgets
Using widgets
You can save a widget as a standalone monitor, change the view type, as well as configure tables and filter data.
To save a dashboard widget as a monitor:
1. Hover over a widget in the dashboard, and click Expand to Full Screen.
2. In the top menu, click the Save as Monitor icon. The Add Monitor window opens.
3. Enter a name for the monitor in the Name field, and click OK.
To view the widget settings:
1. Click the menu dropdown at the right side of the widget and select Settings.
2. Configure the widget settings and click OK.
The settings will vary depending on the widget.
To configure a table in the widget:
1. Hover over the left side of the table header and click the Configure Table icon.
2. Configure the table options.
Option Description
Best Fit All Columns Resizes all of the columns in a table to fit their content.
Reset Table Resets the table to the default view.
Select Columns Adds or removes columns from the view.
3. Click Apply.
To filter or configure a column in a table:
1. Hover over a column heading, and click the Filter/Configure Column icon.
2. Configure the column options, and click Apply.
Option Description
Resize to Contents Resizes the column to fit the content.
Group by this Column Groups the table rows by the contents in the selected column.
3. To filter a column, enter a value in the Filter field, and click Apply.
FortiOS 6.4.2 Administration Guide 68
Fortinet Inc.
Dashboards and widgets
Filtering is not supported in all the widgets.
Changing the default dashboard template
You can use the GUI to change the default dashboard template. The Optimal template contains a set of popular default
dashboards and FortiView monitors. The Comprehensive template contains a set of default dashboards as well as all
monitors and FortiViews. The Comprehensive template will be familiar to users coming from previous versions of
FortiOS.
Changing the default template will remove the dashboards and monitors you added and reset
the settings in the widgets.
To change the default in the GUI:
1. Click the Actions menu at the right side of Add Dashboard or Add Monitor and click Reset All Dashboards. The
Dashboard Setup window opens.
2. Select a default template and click OK.
The following dashboards and monitors are included in the default templates:
Optimal Dashboards l Status,
l Security
l Network
l Users & Devices
l WiFi
Monitors l FortiView Sources
l FortiView Destinations
l FortiView Applications
l FortiView Web Sites
l FortiView Policies
l FortiView Sessions
Comprehensive Dashboards l Status
l WiFi
Monitors l FortiView Sources
l FortiView Destinations
l FortiView Applications
l FortiView Web Sites
FortiOS 6.4.2 Administration Guide 69
Fortinet Inc.
Dashboards and widgets
l FortiView Threats
l FortiView Compromised Hosts
l FortiView Policies
l FortiView Sessions
l Device Inventory Monitor
l Routing Monitor
l DHCP Monitor
l SD-WAN Monitor
l FortiGuard Quota Monitor
l IPsec Monitor
l SSL-VPN Monitor
l Firewall User Monitor
l Quarantine Monitor
l FortiClient Monitor
l FortiAP Clients Monitor
l Rogue APs Monitor
Monitor dashboards and widgets
Monitor dashboards and widgets allows you to view various states of your FortiGate pertaining to routing, VPN, DHCP,
devices, users, quarantine, and wireless connections.
The following default monitor dashboards are built into FortiOS:
l Network
l Users & Devices
l WiFi
Each built-in dashboard contains multiple widgets which can be expanded for detail view.To save a view as its own
monitor, click Save as Monitor at the right side of the banner.
For more information, see Using widgets on page 68
To view the widgets available in each dashboard category, click Add Widget.
Category Use these widgets to:
Users & Devices l View users and devices connected to the network
l Identify threats from individual users and devices, and quarantine them.
l View FortiGuard and FortiClient data
l Monitor traffic bandwidth over time
Network l Monitor DHCP clients
l Monitor IPsec VPN connections
l Monitor current routing table
l Monitor SD-WAN status
FortiOS 6.4.2 Administration Guide 70
Fortinet Inc.
Dashboards and widgets
Category Use these widgets to:
l Monitor SSL-VPN connections
WiFi l View FortiAP status, channel utilization, and clients
l View login failures and signal strength
l View the number of WiFi clients
Static & Dynamic Routing Monitor
The Static & Dynamic Routing Monitor displays the routing table on the FortiGate including all static and dynamic routing
protocols in IPv4 and IPv6. You can also use this monitor to view the firewall policy route.
To view the routing monitor in the GUI:
1. Go to Dashboard > Network.
2. Hover over the Routing widget, and click Expand to Full Screen. The Routing monitor opens.
3. To view the policy monitor, click the Policy tab.
4. To filter the Interfaces and Type columns:
a. Hover over the column heading, and click the Filter/Configure Column icon.
b. Click Group By This Column, then click Apply.
5. (Optional) Click Save as Monitor to save the widget as monitor.
FortiOS 6.4.2 Administration Guide 71
Fortinet Inc.
Dashboards and widgets
To look up a route in the GUI:
1. Click Route Lookup.
2. Enter an IP address in the Destination field, then click Search. The matching route is highlighted on the Routing
monitor.
To view the routing table in the CLI:
# get route info routing-table all
Sample output:
Codes: K - kernel, C - connected, S - static, R - RIP, B - BGP
O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default
Routing table for VRF=0
S* 0.0.0.0/0 [1/0] via 10.0.10.1, To-HQ-A
[1/0] via 10.0.12.1, To-HQ-MPLS
[1/0] via 10.10.11.1, To-HQ-B
[1/0] via 10.100.67.1, port1
[1/0] via 10.100.67.9, port2
C 10.0.10.0/24 is directly connected, To-HQ-A
C 10.0.10.2/32 is directly connected, To-HQ-A
C 10.0.11.0/24 is directly connected, To-HQ-B
C 10.0.11.2/32 is directly connected, To-HQ-B
C 10.0.12.0/24 is directly connected, To-HQ-MPLS
C 10.0.12.2/32 is directly connected, To-HQ-MPLS
C 10.1.0.0/24 is directly connected, port3
C 10.1.0.2/32 is directly connected, port3
C 10.1.0.3/32 is directly connected, port3
C 10.1.100.0/24 is directly connected, vsw.port6
To look up a firewall route in the CLI:
# diagnose firewall proute list
Sample output:
list route policy info(vf=root):
id=0x7f450002 vwl_service=2(BusinessCritialCloudApp) vwl_mbr_seq=4 5 3 dscp_tag=0xff 0xff
flags=0x0 tos=0x00 tos_mask=0x00 protocol=0 sport=0:65535 iif=0 dport=1-65535 oif=3
(port1) oif=4(port2) oif=18(To-HQ-MPLS)
source(1): 0.0.0.0-255.255.255.255
destination wildcard(1): 0.0.0.0/0.0.0.0
internet service(4): Microsoft.Office.365(4294837472,0,0,0, 33182) Microsoft.Office.Online
(4294837475,0,0,0, 16177) Salesforce(4294837976,0,0,0, 16920) GoToMeeting
(4294836966,0,0,0, 16354)
hit_count=0 last_used=2020-03-30 10:50:18
id=0x7f450003 vwl_service=3(NonBusinessCriticalCloudApp) vwl_mbr_seq=4 5 dscp_tag=0xff 0xff
flags=0x0 tos=0x00 tos_mask=0x00 protocol=0 sport=0:65535 iif=0 dport=1-65535 oif=3
(port1) oif=4(port2)
FortiOS 6.4.2 Administration Guide 72
Fortinet Inc.
Dashboards and widgets
source(1): 0.0.0.0-255.255.255.255
destination wildcard(1): 0.0.0.0/0.0.0.0
internet service(2): Facebook(4294836806,0,0,0, 15832) Twitter(4294838278,0,0,0, 16001)
hit_count=0 last_used=2020-03-30 10:50:18
id=0x7f450004 vwl_service=4(Ping-Policy) vwl_mbr_seq=1 2 dscp_tag=0xff 0xff flags=0x0
tos=0x00 tos_mask=0x00 protocol=1 sport=0:65535 iif=0 dport=1-65535 oif=16(To-HQ-A)
oif=17(To-HQ-B)
DHCP monitor
The DHCP monitor displays all the addresses leased out by FortiGate's DHCP servers. You can use the monitor to
revoke an address for a device, or create, edit, and delete address reservations.
To view the DHCP monitor in the GUI:
1. Go to Dashboard > Network.
2. Hover over the DHCP widget, and click Expand to Full Screen.
To filter or configure a column in the table, hover over the column heading and click
Filter/Configure Column.
To revoke a lease:
1. Select a device in the table.
2. In the toolbar, click Revoke, or right-click the device, and click Revoke. The Confirm window opens.
3. Click OK.
A confirmation window opens only if there is an associated address reservation. If there is no
address, the lease will be removed immediately upon clicking Revoke.
FortiOS 6.4.2 Administration Guide 73
Fortinet Inc.
Dashboards and widgets
To create a DHCP reservation:
1. Select a server in the table.
2. In the toolbar, click Reservation, or right-click the device and click Create DHCP Reservation. The Create New
DHCP Reservation window opens.
3. Configure the DHCP settings.
4. Click OK.
To view top sources by bytes:
1. Right-click a device in the table and click Show in FortiView. The Top Sources by Bytes widget opens.
To view the DHCP lease list in the CLI:
# exec dhcp lease-list
IPSEC monitor
The IPSEC monitor displays all connected Site to Site VPN and Dial-up VPNs. You can use the monitor to bring a phase
2 tunnel up or down or disconnect dial-up users.
To view the IPSEC monitor in the GUI:
1. Go to Dashboard > Network.
2. Hover over the IPSEC widget, and click Expand to Full Screen.
To filter or configure a column in the table, hover over the column heading and click
Filter/Configure Column.
To reset statistics:
1. Select a tunnel in the table.
2. In the toolbar, click Reset Statistics or right-click the tunnel, and click Reset Statistics. The Confirm window opens.
FortiOS 6.4.2 Administration Guide 74
Fortinet Inc.
Dashboards and widgets
3. Click OK.
To bring a tunnel up:
1. Select a tunnel in the table.
2. Click Bring Up, or right-click the tunnel, and click Bring Up. The Confirm window opens.
3. Click OK.
To bring a tunnel down:
1. Select a tunnel in the table.
2. Click Bring Down, or right-click the tunnel, and click Bring Down. The Confirm window opens.
3. Click OK.
To locate a tunnel on the VPN Map:
1. Select a tunnel in the table.
2. Click Locate on VPN Map, or right-click the tunnel, and click Locate on VPN Map. You are taken to VPN > VPN
Location Map.
To view the IPSEC monitor in the CLI:
# diag vpn tunnel list
Sample output:
list all ipsec tunnel in vd 0
------------------------------------------------------
name=fct-dialup ver=1 serial=4 10.100.67.5:0->0.0.0.0:0 dst_mtu=0
bound_if=3 lgwy=static/1 tun=intf/0 mode=dialup/2 encap=none/512 options[0200]=frag-rfc
accept_traffic=1 overlay_id=0
proxyid_num=0 child_num=0 refcnt=12 ilast=5545 olast=5545 ad=/0
stat: rxp=0 txp=0 rxb=0 txb=0
dpd: mode=on-demand on=0 idle=20000ms retry=3 count=0 seqno=0
natt: mode=none draft=0 interval=0 remote_port=0
run_tally=0
------------------------------------------------------
name=To-HQ-MPLS ver=2 serial=3 192.168.0.14:0->192.168.0.1:0 dst_mtu=1500
bound_if=7 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/528 options[0210]=create_dev
frag-rfc accept_traffic=1 overlay_id=0
proxyid_num=1 child_num=0 refcnt=22 ilast=0 olast=0 ad=/0
stat: rxp=66693 txp=29183 rxb=33487128 txb=1908427
dpd: mode=on-demand on=1 idle=20000ms retry=3 count=0 seqno=0
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=To-HQ-MPLS proto=0 sa=1 ref=6 serial=1 adr
src: 0:0.0.0.0/0.0.0.0:0
dst: 0:0.0.0.0/0.0.0.0:0
SA: ref=3 options=32203 type=00 soft=0 mtu=1438 expire=266/0B replaywin=2048
seqno=2c5e esn=0 replaywin_lastseq=00002ea3 itn=0 qat=0 hash_search_len=1
life: type=01 bytes=0/0 timeout=1773/1800
dec: spi=700c9198 esp=aes key=16 ebd04605de6148c8a92ced48b30930fa
ah=sha1 key=20 5f0201f67d7c714a046025a1df41d40376437f6a
enc: spi=5aaccc20 esp=aes key=16 13d5d4b46e5e9c42eef509f2d9879188
FortiOS 6.4.2 Administration Guide 75
Fortinet Inc.
Dashboards and widgets
ah=sha1 key=20 2dde67ef7a2a78b622d9a7ec6d75ad3c55d241e1
dec:pkts/bytes=11938/5226964, enc:pkts/bytes=11357/1312184
SSL VPN monitor
The SSL VPN monitor displays user logins and active connections. You can use the monitor to disconnect a specific
connection.
To view the SSL-VPN monitor in the GUI:
1. Go Dashboard > Network.
2. Hover over the SSL-VPN widget, and click Expand to Full Screen.
To filter or configure a column in the table, hover over the column heading and click
Filter/Configure Column.
To disconnect a user:
1. Select a user in the table.
2. In the table, right-click the user, and click End Session. The Confirm window opens.
3. Click OK.
To monitor SSL-VPN users in the CLI:
# get vpn ssl monitor
Sample output
SSL VPN Login Users:
Index User Group Auth Type Timeout From HTTP in/out HTTPS in/out
0 amitchell TAC 1(1) 296 10.100.64.101 3838502/11077721 0/0
1 mmiles Dev 1(1) 292 10.100.64.101 4302506/11167442 0/0
SSL VPN sessions:
Index User Group Source IP Duration I/O Bytes Tunnel/Dest IP
FortiOS 6.4.2 Administration Guide 76
Fortinet Inc.
Dashboards and widgets
Firewall Users Monitor
The Firewall Users monitor displays all firewall users currently logged in. You can use the monitor to diagnose user-
related logons or to highlight and deauthenticate a user.
To view the firewall monitor in the CLI:
1. Go to Dashboard > Users & Devices.
If you are using the Comprehensive dashboard template, go to Dashboard > Firewalll User Monitor. See Changing
the default dashboard template on page 69.
2. Hover over the Firewall Users widget, and click Expand to Full Screen.
3. To show FSSO Logons, click Show all FSSO Logons at the top right of the page.
To filter or configure a column in the table, hover over the column heading and click
Filter/Configure Column.
To deauthenticate a user:
1. (Optional) Use the Search field to search for a specific user.
2. In the toolbar, click Deauthenticate, or right-click the user, and click Deauthnticate. The Confirm window opens.
3. Click OK.
To view firewall users in the CLI:
# diag firewall auth list
Wifi Dashboard
The Wifi Dashboard is one of the default monitor dashboards built into FortiOS. It allows you to view FortiAP status,
channel utilization, WiFi clients and associated information, login failures and signal strength, and so on.
Go to Dashboard > WiFi to access the WiFi Dashboard:
FortiOS 6.4.2 Administration Guide 77
Fortinet Inc.
Dashboards and widgets
You may customize the WiFi dashboard as per your requirements. To know more about using and modifying
dashboards and widgets, see Dashboards and widgets on page 63.
This section describes the following monitors available for the Wifi Dashboard:
l FortiAP Status monitor on page 78
l Clients by FortiAP monitor on page 80
FortiAP Status monitor
The FortiAP Status monitor displays the status and the channel utilization of the radios of FortiAP devices connected to a
FortiGate. It also provides access to tools to diagnose and analyze connected APs.
To view the FortiAP Status monitor in the GUI:
1. Go to Dashboard > WiFi.
2. Hover over the FortiAP Status widget, and click Expand to Full Screen. The FortiAP Status monitor opens.
FortiOS 6.4.2 Administration Guide 78
Fortinet Inc.
Dashboards and widgets
3. (Optional) Click Save as Monitor to save the widget as monitor.
To view the Diagnostics and Tools menu in the GUI:
1. Select and right-click on an Access Point entry in the table on the FortiAP Status monitor page.
2. Click Diagnostics and Tools. The Diagnostics and Tools dialog for the selected FortiAP device slides in on the
screen.
3. You may click on the various tabs in the Diagnostics and Tools dialog like Clients, Spectrum Analysis, VLAN Probe,
and so on, to monitor and analyze the FortiAP device.
The Diagnostics and Tools dialog is similar to the device dialog from WiFi & Switch Controller > Managed FortiAPs. To
learn more about the various tabs and their functions, see Support for spectrum analysis of FortiAP E models, VLAN
probe report, and Standardize wireless health metrics.
FortiOS 6.4.2 Administration Guide 79
Fortinet Inc.
Dashboards and widgets
Clients by FortiAP monitor
The Clients by FortiAP monitor allows you to view detailed information about the health of individual WiFi connections in
the network. It also provides access to tools to diagnose and analyze connected wireless devices.
To view the Clients by FortiAP monitor in the GUI:
1. Go to Dashboard > WiFi.
2. Hover over the Clients by FortiAP widget, and click Expand to Full Screen. The Clients by FortiAP monitor opens.
3. (Optional) Click Save as Monitor to save the widget as monitor.
FortiOS 6.4.2 Administration Guide 80
Fortinet Inc.
Dashboards and widgets
To view the summary page for a wireless client in the GUI:
1. Select a client entry in the table on the Clients by FortiAP monitor page.
2. Right-lick on the selected client entry in the table and select Diagnostics and Tools. The summary dialog for the
selected client slides in on the screen.
3. You may click on Quarantine to quarantine, or Disassociate to disassociate the selected wireless client.
From the summary page, the Health section displays the overall health for the wireless connection. The overall health of
the connection is:
FortiOS 6.4.2 Administration Guide 81
Fortinet Inc.
Dashboards and widgets
l Good if the value range for all three conditions are Good
l Fair or poor if one of the three conditions is Fair or Poor respectively.
Condition Value Range
Signal Strength l Good > -56dBm
l -56dBm > Fair > -75dBm
l Poor < -75dBm
Signal Strength/Noise l Good > 39dBm
l 20dBm < Fair < 39dBm
l Poor < 20dBm
Band l Good = 5G band
l Fair = 2.4G band
The summary page also has the following FortiView tabs:
l Performance
FortiOS 6.4.2 Administration Guide 82
Fortinet Inc.
Dashboards and widgets
l Applications
l Destinations
l Policies
FortiOS 6.4.2 Administration Guide 83
Fortinet Inc.
Dashboards and widgets
l Logs
The Clients by FortiAP monitor is a drilled-down version of the WiFi & Switch Controller > WiFi Clients page.
Device inventory
You can enable device detection to allow FortiOS to monitor your networks and gather information about devices
operating on those networks, including:
l MAC address
l IP address
l Operating system
l Hostname
l Username
l When FortiOS detected the device and on which interface
You can enable device detection separately on each interface in Network > Interfaces.
Device detection is intended for devices directly connected to your LAN ports. If enabled on a WAN port, device
detection may be unable to determine the OS on some devices. You can enable active scanning on the interface to find
hosts whose device types FortiOS cannot determine passively.
You can also manually add devices to Device Inventory to ensure that a device with multiple interfaces displays as a
single device.
To view the device inventory monitor in the GUI:
1. Go to Dashboard > Users & Devices.
If you are using the Comprehensive dashboard template, go to Dashboard > Device Inventory Monitor. See
Changing the default dashboard template on page 69.
2. Hover over the Device Inventory widget, and click Expand to Full Screen. The Device Inventory pane appears.
FortiOS 6.4.2 Administration Guide 84
Fortinet Inc.
Dashboards and widgets
To filter or configure a column in the table, hover over the column heading, and click
Filter/Configure Column. See Device inventory and filtering on page 85.
Device inventory and filtering
The Device Inventory widget contains a series of summary charts that provide an overview of the hardware, operating
system, status, and interfaces. You can use these clickable charts to simplify filtering among your devices.
To view the device inventory and apply a filter:
1. Go to Dashboard > Users & Devices.
If you are using the Comprehensive dashboard template, go to Dashboard > Device Inventory Monitor. See
Changing the default dashboard template on page 69.
2. Hover over the Device Inventory widget, and click Expand to Full Screen. The Device Inventory pane appears.
3. To filter the order of the charts by operating system, click the dropdown in the top menu bar and select Software OS.
4. To filter a chart, click an item in the legend or chart area. The table displays the filter results.
5. To combine filters, hover over a column heading and click Filter/Configure Column.
6. Click the filter icon in the top-right corner of the chart to remove the filter.
FortiOS 6.4.2 Administration Guide 85
Fortinet Inc.
Dashboards and widgets
Filter examples
To filter all Linux devices:
1. In the Software OS chart, click Linux .
To filter all offline devices:
1. In the Status chart, click Offline.
FortiOS 6.4.2 Administration Guide 86
Fortinet Inc.
Dashboards and widgets
To filter all devices discovered on port4:
1. In the Interfaces chart, click port3.
Adding MAC-based addresses to devices
Assets detected by device detection appear in the Device Inventory widget. You can manage policies around devices by
adding a new device object (MAC-based address) to a device. Once you add the MAC-based address, the device can be
used in address groups or directly in policies.
To add a MAC-based address to a device:
1. Go to Dashboard > Users & Devices.
If you are using the Comprehensive dashboard template, go to Dashboard > Device Inventory Monitor. See
Changing the default dashboard template on page 69.
2. Hover over the Device Inventory widget, and click Expand to Full Screen. The Device Inventory monitor opens.
FortiOS 6.4.2 Administration Guide 87
Fortinet Inc.
Dashboards and widgets
3. Click a device and then click Firewall Device Address.
4. (Optional) In the Name field, give the device a descriptive name.
Use the Name field to assign a descriptive name to a device so it is easier to find it in the
Device column. After you finish configuring the device, refresh the page to see the new
name in the dashboard.
FortiOS 6.4.2 Administration Guide 88
Fortinet Inc.
Dashboards and widgets
5. Click OK. The MAC address icon appears in the Address column next to the device name.
FortiView
FortiView is the FortiOS log view tool and comprehensive monitoring system for your network. FortiView integrates real-
time and historical data into a single view on your FortiGate. It can log and monitor network threats, keep track of
administration activities, and more.
Use FortiView dashboards and widgets to investigate traffic activity such as user uploads and downloads, or videos
watched on YouTube. You can view the traffic on the whole network, by user group or by individual. FortiView displays
the information in both text and visual format, giving you an overall picture of your network traffic activity so that you can
quickly decide on actionable items.
FortiView is integrated with many UTM functions and each release adds more features. For example, you can
quarantine an IP address directly in FortiView or create custom devices and addresses from a FortiView entry.
The logging range and depth will depend on the FortiGate model.
FortiView monitors and widgets
FortiView dashboards and widgets are available in the tree menu under the Dashboards module. The module contains
several core dashboards for the top categories. Non-core FortiView pages are available as widgets that can be added to
the dashboards. You can also use non-core pages to create standalone monitors.
FortiOS 6.4.2 Administration Guide 89
Fortinet Inc.
Dashboards and widgets
Core FortiView dashboards
The following core dashboards are available in the tree menu under the Dashboard console:
Dashboard Usage
FortiView Sources Displays Top Sources by traffic volume and drilldown by Source.
FortiView Destinations Displays Top Destinations by traffic volume and drilldown by Destination.
FortiView Applications Displays Top Applications by traffic volume and drilldown by Application.
FortiView Websites Displays Top Websites by session count and drilldown by Domain.
FortiView Policies Displays Top Policies by traffic volume and drilldown by Policy number
FortiView Sessions Displays Top Sessions by traffic source and can be used to end sessions.
Usage is based on default settings. The pages may be customized further and sorted by other fields.
You can quarantine a host and ban an IP from all of the core FortiView monitors.
FortiView widgets
FortiView widgets allow you to create custom dashboards to monitor vulnerabilities, scan summaries, and top items from
selected FortiView categories. You can also customize widgets to show information that is most important to you, such
as the time range, source logging device, and other information. For information, see Adding FortiView widgets on page
91
FortiOS 6.4.2 Administration Guide 90
Fortinet Inc.
Dashboards and widgets
Adding FortiView widgets
Non-core FortiView pages are available in the Add Dashboard window.You can add a FortiView widget to a dashboard
or save the widget as a monitor.
You cannot add widgets to a core FortiView monitor.
To add a FortiView widget in the GUI:
1. In the tree menu, select a dashboard and click Add Widget.
2. In the FortiView section, click Add next to a widget. You can use the Search field to search for a specific widget or
click Show More to view more widgets.
3. In the Fabric member area, click Default or Specify to select a FortiGate device in the security fabric.
4. From the Time Period dropdown, select the time period. This option is not available in all widgets.
5. In the Visualization area, select Table View or Bubble Chart.
6. From the Sort By dropdown, select the sorting method.
7. Click Add Widget.
Widgets by category
Usage is based on the default settings. The widgets may be customized further and sorted by other fields.
LAN/DMZ
Widget Sort by Usage
Applications Bytes/Sessions/Bandwidth/Packets Displays top applications and drilldown by
application.
Cloud Applications Bytes/Sessions/Files(Up/Down) Displays top cloud applications and drilldown
by application .
Cloud Users Bytes/Sessions/Files(Up/Down) Displays top cloud users and drilldown by
cloud user.
Compromised Hosts Verdict Displays compromised hosts and drilldown by
source.
Countries/Regions Bytes/Sessions/Bandwidth/Packets Displays top countries/regions and drilldown
by countries/regions.
Destination Firewall Bytes/Sessions/Bandwidth/Packets Displays top destination firewall objects and
Objects drilldown by destination objects.
Destination Owners Bytes/Sessions/Bandwidth/Packets Displays top destination owners and drilldown
by destination.
FortiOS 6.4.2 Administration Guide 91
Fortinet Inc.
Dashboards and widgets
Widget Sort by Usage
Destinations Bytes/Sessions/Bandwidth/Packets Displays top destinations and drilldown by
destination.
Search Phrases Count Displays top search phrases and drilldown by
search phrase.
Source Firewall Bytes/Sessions/Bandwidth/Packets Displays top search phrases and drilldown by
Objects source object.
Sources Bytes/Sessions/Bandwidth/Packets Displays top sources and drilldown by source.
Threats Threat level/Threat Score/Sessions Displays top threats and drilldown by threat.
Traffic Shaping Dropped Displays top traffic shaping and drilldown by
Bytes/Bytes/Sessions/Bandwidth/Packets shaper.
Web Categories Bytes/Sessions/Bandwidth/Packets Displays top web categories and drilldown by
category.
Web Sites Bytes/Sessions/Bandwidth/Packets Displays top web sites and drilldown by
domain.
WiFi Clients Bytes/Sessions Displays top WiFi clients and drilldown by
source.
WAN
Widget Sort by Usage
Servers Bytes/Sessions/Bandwidth/Packets Displays top servers and drilldown by server address.
Sources Bytes/Sessions/Bandwidth/Packets Displays top sources and drilldown by device.
Threats Threat Level/Threat Score/Sessions Displays top threats and drilldown by threat.
All Segments
Widget Sort by Usage
Admin Logins Configuraton Changes/Logins/Failed Displays top admin logins by username.
Logins
Destination Bytes/Sessions/Bandwidth/Packets Displays top destination interfaces by destination
Interfaces interface.
Endpoint Severity Displays top endpoint vulnerabilities by vulnerability
Vulnerabilities name.
Failed Failed Attempts Displays top failed authentications by failed
Authentication authentication source.
FortiSandbox Files Submitted Displays top FortiSandbox files by file name.
FortiOS 6.4.2 Administration Guide 92
Fortinet Inc.
Dashboards and widgets
Widget Sort by Usage
Interface Pairs Bytes/Sessions/Bandwidth/Packets Displays top interface pairs by source interface.
Policies Bytes/Sessions/Bandwidth/Packets Displays top policies by policy.
Source Interfaces Bytes/Sessions/Bandwidth/Packets Displays top source interfaces by source interface.
System Events Level/Events Displays top system events by event name.
VPN Connections/Bytes Displays top VPN connections by user.
Vulnerable Detected Vulnerabilities Displays top vulnerable endpoint devices by device.
Endpoint Devices
A maximum of 25 interfaces can be monitored at one time on a device.
VDOMs and dashboards
Dashboards are created per VDOM when VDOM mode is enabled. Some features and widgets are not available
depending on Multi or Split-task VDOM mode.
Multi-VDOM mode
The following widgets and dashboard setting are not available Multi VDOM mode because it does not support Security
Fabric:
l Security Fabric related widgets
l FortiGate Selection option
Split-task mode
Split-task VDOM mode is limited to two VDOMs, the root VDOM and the FortiGate traffic VDOM. The root VDOM is for all
management related settings and the FortiGate traffic VDOM is for all traffic related settings.
The FortiGate Selection option is available when you create a dashboard in Split-Task VDOM mode.
For information about VDOM modes, see Virtual Domains on page 729.
Examples
When VDOM mode is disabled, the FortiGate Selection option is available in the Add Dashboard window:
When Multi VDOM mode is enabled, the FortiGate Selection is not available in the Add Dashboard window:
FortiOS 6.4.2 Administration Guide 93
Fortinet Inc.
Dashboards and widgets
When Multi VDOM mode is disabled, all the widgets in the Add Dashboard Widget menu are enabled:
When Multi VDOM mode is enabled, the Security Fabric Status widget is disabled:
FortiView interface
Use the FortiView interface to customize the view and visualizations within a dashboard to find the information you are
looking for. The tools in the top menu bar allow you to change the time display, refresh the data, and customize the data
source. You can also right-click a table in the dashboard to view drilldown information for an entry.
FortiOS 6.4.2 Administration Guide 94
Fortinet Inc.
Dashboards and widgets
FortiOS 6.4.2 currently only supports filtering results on the FortiView Sessions on page 107
dashboard.
Top menu bar
The top menu bar contains the following settings:
l A time display dropdown to switch between current and historical data.
l A Refresh button to update the displayed data.
l A Settings dropdown to change the information shown on the dashboard.
Time period display
Use the time display dropdown to select the time period to display on the current dashboard. Time display options vary
depending on the dashboard and can include current information (now) and historical information (1 hour, 24 hours, and
7 days).
Disk logging or remote logging must be enabled to view historical information.
You can use a chart to create a custom time display by selecting the time range with your cursor.
The icon next to the time period identifies the data source (FortiGate Disk, FortiAnalyzer, or FortiGate Cloud). You can
hover over the icon to see a description of the device.
FortiOS 6.4.2 Administration Guide 95
Fortinet Inc.
Dashboards and widgets
View settings
Use the Settings menu to change the data source, sort by information, and visualization.
To change the widget settings:
1. Click the dropdown menu at the right side of the top menu bar, and select Settings.
2. Configure the widget settings, and click OK.
The Data Source dropdown only appears when FortiGate is connected to another data
source.
For information about widget settings, see Adding FortiView widgets on page 91
For dashboards with multiple widgets, you cannot access the settings dropdown when the
widget is expanded to full screen. To change the settings, click the back button to return to the
dashboard, and click the dropdown.
FortiOS 6.4.2 Administration Guide 96
Fortinet Inc.
Dashboards and widgets
Data source
FortiView gathers information from a variety of data sources. If there are no log disk or remote logging configured, the
data will be drawn from the FortiGate's session table, and the Time Period is set to Now.
Other data sources that can be configured are:
l FortiGates (disk)
l FortiAnalyzer
l FortiGate Cloud
When Data Source is set to Best Available Device, FortiAnalyzer is selected when available,
then FortiGate Cloud, and then FortiGate Disk.
Display types
Bubble charts
Display types include table view, bubble charts, and country maps. Not all display types are supported by all
dashboards.
Bubble charts allow you to sort information using the Compare By dropdown menu. The size of each bubble represents
the related amount of data. You can place your cursor over a bubble to display a tool-tip with detailed information on that
item, and click on a bubble to drilldown into greater detail.
FortiOS 6.4.2 Administration Guide 97
Fortinet Inc.
Dashboards and widgets
Country maps
Country maps display traffic activity as regions on a map. Hover over the highlighted region to view information about the
entry. You can also compare data by Bytes, Sessions, Bandwidth, and Packets. Country maps are not available in all
dashboards and widgets.
Table view
Table view displays traffic activity as a graph and a table. To remove the table, click close, at the top right corner of the
graph. To view the graph, click Show Graph.
Source view
Time l Now entries are determined by the FortiGate's system session list.
l Historical or 1 hour or later entries are determined by traffic logs, with additional
information coming from UTM logs.
The dropdown only shows now if there is no disk.
Graph l The graph shows the bytes sent/received in the time frame.
FortiOS 6.4.2 Administration Guide 98
Fortinet Inc.
Dashboards and widgets
l Users can customize the time frame by selecting a time period within the graph.
Columns l Source shows the IP address (and user as well as user avatar if configured) of the source
device.
l Device shows the device information as listed in the Device Inventory widget. Device
detection should be enabled on the applicable interfaces for best function. For
information about adding widgets, see Using widgets on page 68.
l Threat Score is the threat score of the source based on UTM features such as Web Filter
and antivirus. It shows threat scores allowed and threat scores blocked.
l Bytes is the accumulated bytes sent/received. In realtime, this is calculated from the
session list, and in historical it is from logs.
l Sessions is the total sessions blocked/allowed. In realtime, this is calculated from the
session list, and in historical it is from logs.
l Source is a simplified version of the first column, including only the IP address without
extra information.
l Source Interface is the interface from which the traffic originates. In realtime, this is
calculated from the session list, and in historical it is from the logs.
l FortiGate is the name of the fabric device.
l More information can be shown in a tooltip while hovering over these entries.
l For realtime, two more columns are available, Bandwidth and Packets, both of which
come from the session list.
Hover over linked items in an entry to view additional information. Some information windows provide links to other areas
of FortiOS such as the application signatures page.
To select the columns displayed in a table, hover over the header in the first column, and click the configure table icon.
FortiOS 6.4.2 Administration Guide 99
Fortinet Inc.
Dashboards and widgets
Drilldown information
Double-click or right-click an entry in a FortiView dashboard and select Drill Down to Details to view additional details
about the selected traffic activity. Click the Back icon in the toolbar to return to the previous view.
You can group drilldown information into different drilldown views. For example, you can group the drilldown information
in the Top FortiView Destinations dashboard by Sources, Applications, Threats, and Policies.
Double-click an entry to view the logs in Sessions view. Double-click a session to view the logs.
Graph l The graph shows the bytes sent/received in the time frame. Realtime does not include a
chart.
l Users can customize the time frame by selecting a time period within the graph.
FortiOS 6.4.2 Administration Guide 100
Fortinet Inc.
Dashboards and widgets
Summary l Shows information such as the user/avatar, avatar/source IP, bytes, and sessions total
Information for the time period.
l Can quarantine host (access layer quarantine) if they are behind a FortiSwitch or
FortiAP.
l Can ban IP addresses, adds the source IP address into the quarantine list.
Tabs l Drilling down entries in any of these tabs (except sessions tab) will take you to the
underlying traffic log in the sessions tab.
l Applications shows a list of the applications attributed to the source IP. This can include
scanned applications (using Application Control in a firewall policy or unscanned
applications.
config log gui-display
set fortiview-unscanned-apps enable
end
l Destinations shows destinations grouped by IP address/FQDN.
l Threats lists the threats caught by UTM profiles. This can be from antivirus, IPS, Web
Filter, Application Control, etc.
l Web Sites contains the websites which were detected either with webfilter, or through
FQDN in traffic logs.
l Web Categories groups entries into their categories as dictated by the Web Filter
Database.
l Policies groups the entries into which polices they passed through or were blocked by.
l Sessions shows the underlying logs (historical) or sessions (realtime). Drilldowns from
other tabs end up showing the underlying log located in this tab.
l Search Phrases shows entries of search phrases on search engines captured by a Web
Filter UTM profile, with deep inspection enabled in firewall policy.
l More information can be shown in a tooltip while hovering over these entries.
To view matching logs or download a log, click the Security tab in the Log Details .
FortiView from disk
FortiView from disk is available on all FortiGates with an SSD disk.
FortiOS 6.4.2 Administration Guide 101
Fortinet Inc.
Dashboards and widgets
Restrictions
Model Supported view
Desktop models (100 series) with Five minutes and one hour
SSD
Medium models with SSD Up to 24 hours
Large models (1500D and Up to seven days
above) with SSD To enable seven days view:
config log setting
set fortiview-weekly-data enable
end
Configuration
A firewall policy needs to be in place with traffic logging enabled. For optimal operation with FortiView, internal interface
roles should be clearly defined as LAN. DMZ and internet facing or external interface roles should be defined as WAN.
To configure logging to disk in the GUI:
1. Enable disk logging from the FortiGate GUI.
a. Go to Log & Report > Log Settings > Local Traffic Log.
b. Select the checkbox next to Disk.
2. Enable historical FortiView from the FortiGate GUI.
a. Go to Log & Report > Log Settings > Local Traffic Log.
b. Select the checkbox next to Enable Historical FortiView.
3. Click Apply.
To include sniffer traffic and local-deny traffic when FortiView from Disk:
This feature is only supported through the CLI.
config report setting
set report-source forward-traffic sniffer-traffic local-deny-traffic
end
FortiOS 6.4.2 Administration Guide 102
Fortinet Inc.
Dashboards and widgets
To configure the data source in the GUI:
1. Go to Dashboard > FortiView Sources.
2. Select a time range other than now from the drop-down list to view historical data.
3. In the top menu, click the dropdown, and select Settings. The Edit Dashboard Widget window opens.
a. In the Data Source area, click Specify.
b. From the dropdown, select Disk, and click OK.
For information see, FortiView interface on page 94.
Troubleshooting
Use execute report flush-cache and execute report recreate-db to clear up any irregularities that may
be caused by upgrading or cache issues.
FortiView from FortiAnalyzer
Attach a FortiAnlyzer to FortiGate to increase the functionality of FortiView. Adding a FortiAnalyzer is useful when adding
widgets such as the Compromised Hosts widget. It also allows historical view for up to seven days.
Requirements
l A FortiGate or FortiOS
l A compatible FortiAnalyzer (see Compatibility with FortiOS)
To configure logging to the FortiAnalyzer:
1. On the FortiGate, go to Security Fabric > Fabric Connectors, and double-click the FortiAnalyzer Logging card.
2. Enter the IP address of the FortiAnalyzer device.
3. Click Test Connectivity. A message will be shown stating that the FortiGate is not authorized on the FortiAnalyzer.
4. On the FortiAnalyzer, go to Device Manager, and click the Unauthorized tab.
FortiOS 6.4.2 Administration Guide 103
Fortinet Inc.
Dashboards and widgets
5. In the device list, right-click the FortiGate, then click Authorize.
6. On FortiGate, go to Security Fabric > Fabric Connectors, and double-click the FortiAnalyzer Logging card.
7. Click Test Connectivity to confirm that the device is now authorized.
To enable FortiView from FortiAnalyzer:
1. Go to Dashboard > FortiView Sources.
2. Select a time range other than now from the drop-down list to view historical data.
3. In top menu, click the dropdown, and select Settings. The Edit Dashboard Widget window opens.
a. In the Data Source area, click Specify.
b. From the dropdown, select FortiAnalyzer, and click OK.
All the historical information now comes from the FortiAnalyzer.
When Data Source is set to Best Available Device, FortiAnalyzer is selected when
available, then FortiGate Cloud, and then FortiGate Disk.
FortiView from FortiGate Cloud
This function requires a FortiGate that is registered and logged into a compatible FortiGate Cloud. When using FortiGate
Cloud, the Time Period can be set to up to 24 hours.
FortiOS 6.4.2 Administration Guide 104
Fortinet Inc.
Dashboards and widgets
To configure logging to FortiGate Cloud:
1. Go to Security Fabric > Fabric Connectors, and double-click the Cloud Logging card.
2. For Status, click Enabled.
3. For Type, click FortiGate Cloud.
If the FortiGate is registered and logged into FortiGate Cloud, the Account and Region is displayed.
If the FortiGate is logged out from FortiGate Cloud, click Activate and log in, and ensure Send logs to FortiGate
Cloud is selected.
4. Go to Log & Report > Log Settings and set the following:
a. Set Event Logging to All.
b. Set Local Traffic Log to All.
To enable FortiView with log source as FortiGate Cloud:
1. Go to Dashboard > FortiView Sources.
2. In the top menu, click the dropdown, and select Settings. The Edit Dashboard Widget window opens.
a. In the Data Source area, click Specify.
b. From the dropdown, select FortiGate Cloud, and click OK.
You can select FortiGate Cloud as the data source for all available FortiView pages and
widgets.
FortiOS 6.4.2 Administration Guide 105
Fortinet Inc.
Dashboards and widgets
FortiView sources
The FortiView Sources dashboard displays top sources sorted by Bytes, Sessions or Threat Score. The information can
be displayed in real time or historical views. You can use the dashboard to create or edit a firewall device address or
IP address definitions, and temporarily or permanently ban IPs.
To add a firewall device address:
1. In the Device column, hover over the device MAC address. An information window opens.
2. Click Firewall Device Address. The New Address window opens.
3. Configure the address settings, and click Return.
Use the Name field to assign a descriptive name to a device so it is easier to find it in the
Device column. After you finish configuring the device, refresh the page to see the new
name in the dashboard.
To add a firewall IP address:
1. In the Device column, hover over the device MAC address. An information window opens.
2. Click Firewall IP Address. The New Address window opens.
FortiOS 6.4.2 Administration Guide 106
Fortinet Inc.
Dashboards and widgets
3. Configure the address settings, and click Return.
Use the Name field to assign a descriptive name to a device so it is easier to find it in the
Device column. After you finish configuring the device, refresh the page to see the new
name in the dashboard.
To ban an IP address:
1. In the Device column, hover over the device MAC address. An information window opens.
2. Click Ban IP . The Ban IP window opens.
3. Configure the ban IP settings, and click OK.
FortiView Sessions
The FortiView Sessions dashboard is one of the core FortiView dashboards available in FortiOS. It displays Top
Sessions by traffic source and can be used to end sessions. You may customize the dashboard as per your needs by
using the sort and filter capabilities.
To view the FortiView Sessions dashboard, go to Dashboard > FortiView Sessions.
FortiOS 6.4.2 Administration Guide 107
Fortinet Inc.
Dashboards and widgets
The session table displayed on the FortiView Sessions dashboard is useful when verifying open connections. For
example, if you have a web browser open to browse the Fortinet website, you would expect a session entry from your
computer on port 80 to the IP address for the Fortinet website. You can also use a session table to investigate why there
are too many sessions for FortiOS to process.
You can filter the sessions displayed in the session table by setting up the available filtering options.
To filter sessions in the session table:
1. Click on the Add Filter button at the top of the session table. A list of selectable filtering options drops down.
FortiOS 6.4.2 Administration Guide 108
Fortinet Inc.
Dashboards and widgets
2. Select the required filtering option. For example you may select Country/Region, and select a country from the list of
countries. The session table updates as per the selected country.
3. You may add one or more filters depending upon your requirements. To add more filters, repeat the above steps for
a different set of filters.
You can be really specific with the way you use filters and target sessions based on different filter combinations. For
example, you may want to view all sessions from a computer with a particular IP, and you can do that by adding the
Source IP filter. Similarly, you may need to target all the sessions having a particular Destination IP and Destination Port,
and so on.
You may also see the session data in the CLI.
FortiOS 6.4.2 Administration Guide 109
Fortinet Inc.
Dashboards and widgets
To view session data using the CLI:
# diagnose sys session list
The session table output in the CLI is very large. You can use the supported filters in the CLI to show only the data you
need.
To view session data with filters using the CLI:
# diagnose sys session filter <option>
See Using a session table on page 1794 to learn more about using the supported filters in the CLI.
You may also decide to end a particular session or all sessions for administrative purposes.
To end sessions from the GUI:
1. Select a session that you want to end by clicking on it. To select multiple sessions, hold the Ctrl or Shift key on your
keyboard while clicking the session entries in the table.
2. Right-click on the selected sessions you want to end. A menu with options appears.
3. Click on End Session(s) to end the selected sessions, or End All Sessions to end all the active sessions.
FortiOS 6.4.2 Administration Guide 110
Fortinet Inc.
Dashboards and widgets
4. Click OK in the confirmation dialog. The selected sessions are now ended.
Viewing top websites and sources by category
You can use FortiGuard web categories to populate the category fields in various FortiViews such as FortiView Web
Categories, FortiView Websites or FortiView Sources. To view the categories in a dashboard, the web filter profile must
be configured to at least monitor for FortiGuard category based filter, and applied to a firewall policy for outbound traffic.
To verify the web filter profile is monitor-only:
1. Go to Security Profiles > Web Filter.
2. Double-click a web filter that is applied to an outbound traffic firewall policy. The Edit Web Filter Profile window
opens.
3. Ensure FortiGuard category based filter is enabled.
In the image below, the General Interest - Business categories are monitor-only.
FortiOS 6.4.2 Administration Guide 111
Fortinet Inc.
Dashboards and widgets
To create a Web categories dashboard:
1. Under Dashboard, click Add Dashboard. The Add Dashboard window opens.
2. In the Name field, enter a name such as FortiView Web Categories and click OK. The new dashboard opens.
3. In the banner, click Add Widget. The Add Dashboard Widget window opens.
4. In the Search field, type FortiView Web Categories and click the Add button next to the widget name.
5. In the Fabric Member area, click Default or Specify to select a device in the security fabric.
6. From the Time Period dropdown, select a time period greater than Now.
7. From the Sort By dropdown, select Bytes, Sessions, Bandwidth, or Packets.
8. Click Add Widget. The widget is added to the dashboard.
Viewing the web filter category
The web filter category name appears in the Category column of the dashboard.
FortiOS 6.4.2 Administration Guide 112
Fortinet Inc.
Dashboards and widgets
Click an entry in the table. The category name appears at the top of Summary of box.
Click the Web Sites tab. The category name appears in the Category column.
Click the Sessions tab. The category name appears in the Category Description column.
The category name also appears in the Category column in the FortiView Websites and FortiView Sources dashboards.
FortiOS 6.4.2 Administration Guide 113
Fortinet Inc.
Dashboards and widgets
Cloud application view
To see different cloud application views, set up the following:
l A FortiGate having a relative firewall policy with the Application Control security profile.
l A FortiGate with log data from the local disk or FortiAnalyzer.
l Optional but highly recommended: SSL Inspection set to deep-inspection on relative firewall policies.
Viewing cloud applications
Cloud applications
All cloud applications require SSL Inspection set to deep-inspection on the firewall policy. For example, Facebook_
File.Download can monitor Facebook download behavior which requires SSL deep-inspection to parse the deep
information in the network packets.
To view cloud applications:
1. Go to Security Profiles > Application Control.
2. Select a relative Application Control profile used by the firewall policy and click Edit.
3. On the Edit Application Sensor page, click View Application Signatures.
4. Hover over a column heading or the Application Signature bar. In the right gutter area, click the filter icon to filter the
applications.
FortiOS 6.4.2 Administration Guide 114
Fortinet Inc.
Dashboards and widgets
Cloud applications have a cloud icon beside them.
The lock icon indicates that the application requires SSL deep inspection.
5. Hover over an item to see its details.
This example shows Gmail_Attachment.Download, a cloud application signature based sensor which requires SSL
deep inspection. If any local network user behind the firewall logs into Gmail and downloads a Gmail attachment,
that activity is logged.
Applications with cloud behavior
Applications with cloud behavior is a superset of cloud applications.
Some applications do not require SSL deep inspection, such as Facebook, Gmail, and YouTube. This means that if any
traffic trigger application sensors for these applications, there is a FortiView cloud application view for that traffic.
Other applications require SSL deep inspection, such as Gmail attachment, Facebook_Workplace, and so on.
FortiOS 6.4.2 Administration Guide 115
Fortinet Inc.
Dashboards and widgets
To view applications with cloud behavior:
1. In the Application Signature page, ensure the Behavior column is displayed. If necessary, add the Behavior column.
a. Hover over the left side of the table column headings to display the Configure Table icon.
b. Click Configure Table and select Behavior.
c. Click Apply.
2. Click the filter icon in the Behavior column and select Cloud to filter by Cloud. Then click Apply.
3. The Application Signature page displays all applications with cloud behavior.
FortiOS 6.4.2 Administration Guide 116
Fortinet Inc.
Dashboards and widgets
4. Use the Search box to search for applications. For example, you can search for youtube.
5. Hover over an item to see its details.
This example shows an application sensor with no lock icon which means that this application sensor does not
require SSL deep inspection. If any local network user behind the firewall tries to navigate to the YouTube website,
that activity is logged.
Configuring the Cloud Applications widget
On the Edit Application Sensor page in the Categories section, the eye icon next to a category means that category is
monitored and logged.
FortiOS 6.4.2 Administration Guide 117
Fortinet Inc.
Dashboards and widgets
To add the Cloud Applications widget in the GUI:
1. Go to Dashboard , and select a dashboard in the tree menu.
2. In the dashboard banner, click Add Widget. The Add Dashboard Widget window opens.
3. In the Search field, enter FortiView Cloud Applications and click the Add button next to the widget.
4. In the Fabric Member area, click Default or Specify to select a device in the security fabric.
5. From the Time Period dropdown, select a time period greater than Now.
6. From the Sort By dropdown, select Bytes, Sessions, or Files (Up/Down).
7. Click Add Widget. The widget is added to the dashboard.
8. Click Close.
9. Hover the FortiView Cloud Applications widget and click Expand to Full Screen.
10. If SSL deep inspection is enabled on the relative firewall, then the widget shows the additional details that are
logged, such as Files (Up/Down) and Videos Played.
For YouTube, the Videos Played column is triggered by the YouTube_Video.Play cloud application sensor. This
shows the number of local network users who logged into YouTube and played YouTube videos.
For Dropbox, the Files (Up/Down) column is triggered by Dropbox_File.Download and Dropbox_File.Upload cloud
application sensors. This shows the number of local network users who logged into Dropbox and uploaded or
downloaded files.
FortiOS 6.4.2 Administration Guide 118
Fortinet Inc.
Dashboards and widgets
Using the Cloud Applications widget
To see additional information in the Cloud Applications widget:
1. Hover over the widget in the dashboard, and click Expand to full screen.
2. For details about a specific entry, double-click the entry or right-click the entry and select Drill Down to Details.
3. To see all the sessions for an application, click Sessions.
In this example, the Application Name column shows all applications related to YouTube.
FortiOS 6.4.2 Administration Guide 119
Fortinet Inc.
Dashboards and widgets
4. To view log details, double-click a session to display the Log Details pane.
Sessions monitored by SSL deep inspection (in this example, Youtube_Video.Play) captured deep information such
as Application User, Application Details, and so on. The Log Details pane also shows additional deep information
such as application ID, Message, and so on.
Sessions not monitored by SSL deep inspection (YouTube) did not capture the deep information.
5. To display a specific time period, select and drag in the timeline graph to display only the data for that time period.
Top application: YouTube example
Monitoring network traffic with SSL deep inspection
This example of monitors network traffic for YouTube using FortiView Applications view with SSL deep inspection.
To monitor network traffic with SSL deep inspection:
1. Use a firewall policy with the following settings. If necessary, create a policy with these settings.
l Application Control is enabled.
l SSL Inspection is set to deep-inspection.
FortiOS 6.4.2 Administration Guide 120
Fortinet Inc.
Dashboards and widgets
l Log Allowed Traffic is set to All Sessions.
2. Go to Security Profiles > Application Control.
3. Select a relative Application Control profile used by the firewall policy and click Edit.
4. Because YouTube cloud applications are categorized into Video/Audio, ensure the Video/Audio category is
monitored.
Monitored categories are indicate by an eye icon.
5. Click View Application Signatures and hover over YouTube cloud applications to view detailed information about
YouTube application sensors.
6. Expand YouTube to view the Application Signatures associated with the application.
Application Signature Description Application
ID
YouTube_Video.Access An attempt to access a video on YouTube. 16420
YouTube_Channel.ID An attempt to access a video on a specific channel on 44956
YouTube.
YouTube_Comment.Posting An attempt to post comments on YouTube. 31076
YouTube_HD.Streaming An attempt to watch HD videos on YouTube. 33104
YouTube_Messenger An attempt to access messenger on YouTube. 47858
YouTube_Video.Play An attempt to download and play a video from YouTube. 38569
YouTube_Video.Upload An attempt to upload a video to YouTube. 22564
YouTube An attempt to access YouTube. 31077
This application sensor does not depend on SSL deep
inspection so it does not have a cloud or lock icon.
YouTube_Channel.Access An attempt to access a video on a specific channel on 41598
YouTube.
To view the application signature description, click the ID link in the information window.
7. On the test PC, log into YouTube and play some videos.
8. On the FortiGate, go to Log & Report > Application Control and look for log entries for browsing and playing
YouTube videos.
FortiOS 6.4.2 Administration Guide 121
Fortinet Inc.
Dashboards and widgets
In this example, note the Application User and Application Details. Also note that the Application Control ID is 38569
showing that this entry was triggered by the application sensor YouTube_Video.Play.
9. Go to Dashboard > FortiView Applications.
10. In the FortiView Applications dashboard, double-click YouTube to view the drilldown information.
11. Select the Sessions tab to see all the entries for the videos played. Check the sessions for YouTube_Video.Play
with the ID 38569.
Monitoring network traffic without SSL deep inspection
This example of monitors network traffic for YouTube using FortiView cloud application view without SSL deep
inspection.
To monitor network traffic without SSL deep inspection:
1. Use a firewall policy with the following settings. If necessary, create a policy with these settings.
l Application Control is enabled.
l SSL Inspection is set to certificate-inspection.
FortiOS 6.4.2 Administration Guide 122
Fortinet Inc.
Dashboards and widgets
l Log Allowed Traffic is set to All Sessions.
2. On the test PC, log into YouTube and play some videos.
3. On the FortiGate, go to Log & Report > Application Control and look for log entries for browsing and playing
YouTube videos.
In this example, the log shows only applications with the name YouTube. The log cannot show YouTube application
sensors which rely on SSL deep inspection.
4. Go to Dashboard > FortiView Applications.
The FortiView Cloud Application by Bytes dashboard shows the YouTube cloud application without the video played
information that requires SSL deep inspection.
FortiOS 6.4.2 Administration Guide 123
Fortinet Inc.
Dashboards and widgets
5. Double-click YouTube and click the Sessions tab.
These sessions were triggered by the application sensor YouTube with the ID 31077. This is the application sensor
with cloud behavior which does not rely on SSL deep inspection.
FortiView Top Source and Top Destination Firewall Objects widgets
The FortiView Source Firewall Objects and FortiView Destination Firewall Objects widgets leverage UUID to resolve
firewall object address names for improved usability.
Requirements
To have a historical Firewall Objects-based view, address objects' UUIDs need to be logged.
To enable address object UUID logging in the CLI:
config system global
set log-uuid-address enable
end
To add a firewall object widget in the GUI:
1. Open a dashboard and click Add Widget. The Add Dashboard Widget window opens.
2. In the Search field, type Destination Firewall Objects and click the Add button next to the dashboard name.
3. In the Fabric Member area, select Default or Specify to select a device in the security fabric.
4. In the Data Source area, select Best Available or Specify. For information about data sources, see FortiView
interface on page 94.
5. From the Time Period dropdown, select the time period.
6. In the Visualization area, select Table View or Bubble Chart.
7. From the Sort By dropdown, select Bytes, Sessions, Bandwidth, or Packets.
8. Click Add Widget.
FortiOS 6.4.2 Administration Guide 124
Fortinet Inc.
Dashboards and widgets
Example
In this example, firewall addresses have been configured and associated with a unique UUID.
In the FortiView Source Firewall Objects and FortiView Destination Firewall Objects widgets, firewall objects can be
displayed in real-time or in a historical chart. Objects can also be drilled down for more details.
To view Firewall Object-based charts in real-time:
1. Open a dashboard, and click Add Widget. The Add Dashboard Widget window opens.
2. In the Search field, type Destination Firewall Objects and click the Add button next to the widget name.
3. From the Time Period dropdown, select Now.
4. Click Add Widget.
To view Firewall Object-based charts over a historical period:
1. Open a dashboard, and click Add Widget. The Add Dashboard Widget window opens.
2. In the Search field, type Destination Firewall Objects and click the Add button next to the widget name.
3. From the Time Period dropdown, select a time period other than Now.
4. Click Add Widget.
To drill down Firewall Objects:
1. Right-click on any Source or Destination Object in the view results.
2. Select Drill Down to Details. More information displays about the object; there are additional criteria to filter data.
Viewing session information for a compromised host
You can use the Compromised Hosts by Verdict widget to view the session information for a compromised host.
FortiOS 6.4.2 Administration Guide 125
Fortinet Inc.
Dashboards and widgets
To view session information for a compromised host in the GUI:
1. Go to Dashboard > Security and expand the Compromised Hosts by Verdict widget.
2. Double-click a compromised host to view the session information. You can also right-click a compromised host, and
select View Sessions.
FortiOS 6.4.2 Administration Guide 126
Fortinet Inc.
Dashboards and widgets
3. Double-click a session, or right-click the session and select View Sessions to view the information.
FortiOS 6.4.2 Administration Guide 127
Fortinet Inc.
Fortinet Security Fabric
The Fortinet Security Fabric provides an intelligent architecture that interconnects discrete security solutions into an
integrated whole to detect, monitor, block, and remediate attacks across the entire attack surface. It delivers broad
protection and visibility into every network segment and device, be they hardware, virtual, or cloud based.
l The physical topology view shows all connected devices, including access layer devices. The logical topology view
shows information about the interfaces that each device is connected to.
l Security rating checks analyze the Security Fabric deployment to identify potential vulnerabilities and highlight best
practices to improve the network configuration, deploy new hardware and software, and increase visibility and
control of the network.
l Fabric connectors provide integration with multiple SDN, cloud, and partner technology platforms to automate the
process of managing dynamic security updates without manual intervention.
l Automation pairs an event trigger with one or more actions to monitor the network and take the designated actions
automatically when the Security Fabric detects a threat.
Security Fabric settings and usage
This section contains information about how to configure the following devices as part of the Fortinet Security Fabric:
l Components on page 129
l Configuring the root FortiGate and downstream FortiGates
l Configuring FortiAnalyzer
l Configuring other Security Fabric devices on page 139
l Using the Security Fabric
l Deploying the Security Fabric on page 177
l Synchronizing objects across the Security Fabric on page 185
l Security Fabric over IPsec VPN on page 189
l Leveraging LLDP to simplify security fabric negotiation on page 195
System requirements
To set up the Security Fabric, the devices that you want to include must meet the Product Integration and Support
requirements in the FortiOS Release Notes.
Some features of the Security Fabric are only available in certain firmware versions and models. Not all FortiGate
models can run the FortiGuard Security Rating Service if they are the root FortiGate in a Security Fabric. For more
information, see the Special Notices in the FortiOS Release Notes.
Prerequisites
l If devices are not already installed in your network, complete basic installation and configuration tasks by following
the instructions in the device documentation.
FortiOS 6.4.2 Administration Guide 128
Fortinet Inc.
Fortinet Security Fabric
l FortiGate devices must either have VDOMs disabled or be running in split-task VDOM mode in order to be added to
the Security Fabric. See Virtual Domains on page 729.
l FortiGate devices must be operating in NAT mode.
Components
The Fortinet Security Fabric consists of different components that work together to secure you network.
The following devices are required to create a Security Fabric:
Device Description
FortiGate FortiGate devices are the core of the Security Fabric and can have one of the following roles:
l Root:
The root FortiGate is the main component in the Security Fabric. It is typically located on
the edge of the network and connects the internal devices and networks to the Internet
through your ISP. From the root FortiGate, you can see information about the entire
Security Fabric on the Physical and Logical Topology pages in the GUI.
l Downstream:
After a root FortiGate is installed, all other FortiGate devices in the Security Fabric act as
Internal Segmentation Firewalls (ISFWs), located at strategic points in your internal
network, rather than on the network edge. This allows extra security measures to be
taken around key network components, such as servers that contain valuable intellectual
property. ISFW FortiGate devices create network visibility by sending traffic and
information about the devices that are connected to them to the root FortiGate.
See Configuring the root FortiGate and downstream FortiGates on page 131 for more
information about adding FortiGate devices in the Security Fabric.
FortiGate documentation: https://docs.fortinet.com/product/fortigate
FortiAnalyzer FortiAnalyzer gives you increased visibility into your network, centralized monitoring, and
awareness of threats, events, and network activity by collecting and correlating logs from all
Security Fabric devices. This gives you a deeper and more comprehensive view across the
entire Security Fabric.
See Configuring FortiAnalyzer on page 138 for more information about adding FortiAnalyzer
devices in the Security Fabric.
FortiAnalyzer documentation: https://docs.fortinet.com/product/fortianalyzer
The following devices are recommended:
Device Description
FortiADC FortiADC devices optimize the availability, user experience, and scalability of enterprise
application delivery. They enable fast, secure, and intelligent acceleration and distribution of
even the most demanding enterprise applications.
See Additional devices on page 163 for more information about adding FortiADC devices in
the Security Fabric.
FortiADC documentation: https://docs.fortinet.com/product/fortiadc
FortiOS 6.4.2 Administration Guide 129
Fortinet Inc.
Fortinet Security Fabric
Device Description
FortiAP Add FortiAP devices to extend the Security Fabric to your wireless devices. Devices
connected to a FortiAP appear in the Physical and Logical Topology pages in the Security
Fabric menu.
See FortiAP and FortiSwitch on page 160 for more information about adding FortiAP devices
in the Security Fabric.
FortiAP documentation: https://docs.fortinet.com/product/fortiap
FortiClient FortiClient adds endpoint control to devices that are located in the Security Fabric, allowing
only traffic from compliant devices to flow through the FortiGate. FortiClient compliance
profiles are applied by the first FortiGate that a device’s traffic flows through. Device
registration and on-net status information for a device that is running FortiClient appears only
on the FortiGate that applies the FortiClient profile to that device.
FortiClient documentation: https://docs.fortinet.com/product/forticlient
FortiClient EMS FortiClient EMS is used in the Security Fabric to provide visibility across your network,
securely share information, and assign security profiles to endpoints.
See FortiClient EMS on page 150 for more information about adding FortiClient EMS devices
in the Security Fabric.
FortiClient EMS documentation: https://docs.fortinet.com/product/forticlient
FortiDDoS FortiDDoS is a Network Behavior Anomaly (NBA) prevention system that detects and blocks
attacks that intend to disrupt network service by overutilizing server resources.
See Additional devices on page 163 for more information about adding FortiDDoS devices in
the Security Fabric.
FortiDDoS documentation: https://docs.fortinet.com/product/fortiddos
FortiMail FortiMail antispam processing helps offload from other devices in the Security Fabric that
would typically carry out this process.
See Additional devices on page 163 for more information about adding FortiMail devices in
the Security Fabric.
FortiMail documentation: https://docs.fortinet.com/product/fortimail
FortiManager Add FortiManager to simplify the network management of devices in the Security Fabric by
centralizing management access in a single device. This allows you to easily control the
deployment of security policies, FortiGuard content security updates, firmware revisions, and
individual configurations for devices in the Security Fabric.
See FortiManager on page 145 for more information about adding FortiManager devices in
the Security Fabric.
FortiManager documentation: https://docs.fortinet.com/product/fortimanager
FortiSandbox Add FortiSandbox to your Security Fabric to improve security with sandbox inspection.
Sandbox integration allows FortiGate devices in the Security Fabric to automatically receive
signature updates from FortiSandbox and add the originating URL of any malicious file to a
blocked URL list.
See FortiSandbox on page 148 for more information about adding FortiSandbox devices in
the Security Fabric.
FortiSandbox documentation: https://docs.fortinet.com/product/fortisandbox
FortiOS 6.4.2 Administration Guide 130
Fortinet Inc.
Fortinet Security Fabric
Device Description
FortiSwitch A FortiSwitch can be added to the Security Fabric when it is managed by a FortiGate that is in
the Security Fabric with the FortiLink protocol, and connected to an interface with Security
Fabric Connection enabled. FortiSwitch ports to become logical extensions of the FortiGate.
Devices connected to the FortiSwitch appear in the Physical and Logical Topology pages in
the Security Fabric menu, and security features, such as FortiClient compliance profiles, are
applied to them.
See FortiAP and FortiSwitch on page 160 for more information about adding FortiSwitch
devices in the Security Fabric.
FortiSwitch documentation: https://docs.fortinet.com/product/fortiswitch
FortiWeb Add FortiWeb to defend the application attack surface from attacks that target application
exploits. You can also configure FortiWeb to apply web application firewall features, virus
scanning, and web filtering to HTTP traffic to help offload from other devices in the Security
Fabric that would typically carry out these processes.
See Additional devices on page 163 for more information about adding FortiWeb devices in
the Security Fabric.
FortiWeb documentation: https://docs.fortinet.com/product/fortiweb
FortiWLC FortiWLC delivers seamless mobility and superior reliability with optimized client distribution
and channel utilization. Both single and multi channel deployment options are supported,
maximizing efficiency to make the most of available wireless spectrum.
See Additional devices on page 163 for more information about adding FortiWLC devices in
the Security Fabric.
FortiWLC documentation: https://docs.fortinet.com/product/wireless-controller
The following devices are optional:
Device Description
Other Fortinet Many other Fortinet products can be added to the Security Fabric, including
products FortiAuthenticator, FortiToken, FortiCache, and FortiSIEM.
Documentation: https://docs.fortinet.com/
Third-party Third-party products that belong to the Fortinet Fabric-Ready Partner Program can be added
products to the Security Fabric.
Configuring the root FortiGate and downstream FortiGates
The following procedures include configuration steps for a typical Security Fabric implementation, where the edge
FortiGate is the root FortiGate, and the downstream FortiGate devices are all devices that are downstream from the root
FortiGate.
Prerequisites
l FortiGate devices must either have VDOMs disabled or be running in split-task VDOM mode in order to be added to
the Security Fabric. See Virtual Domains on page 729.
l FortiGate devices must be operating in NAT mode.
FortiOS 6.4.2 Administration Guide 131
Fortinet Inc.
Fortinet Security Fabric
Configure the root FortiGate
The edge FortiGate is typically configured as the root FortiGate, as this allows you to view the full topology of the
Security Fabric from the top down.
To configure the root FortiGate:
1. On the root FortiGate, go to Security Fabric > Fabric Connectors and double-click the Security Fabric Setup card.
2. For Status, click Enable.
3. Set the Security Fabric role to Serve as Fabric Root. FortiAnalyzer logging is automatically enabled and the settings
can be configured.
4. Optionally, enable Source Interface and select an interface to communicate with FortiAnalyzer. If disabled, the
interface will be determined based on the routing table.
5. Enter the FortiAnalyzer IP and select the Upload option.
6. In the FortiAnalyzer Logging section, in the IP address field, enter the IP address of the FortiAnalyzer.
7. If required, enable Allow access to FortiGate REST API and, optionally, Verify FortiAnalyzer certificate.
The REST API accesses the FortiGate topology and shares data and results. The FortiGate will verify the
FortiAnalyzer by retrieving its serial number and checking it against the FortiAnalyzer certificate. When verified, the
FortiAnalyzer serial number is stored in the FortiGate configuration. When authorizing the FortiGate on the
FortiAnalyzer, the FortiGate admin credentials do not need to be entered.
8. Click Test Connectivity.
If you select Test Connectivity and this is the first time that you are connecting the FortiGate to the FortiAnalyzer,
you will receive a warning message because the FortiGate has not yet been authorized on the FortiAnalyzer. You
can configure this authorization when you configure the FortiAnalyzer. See Configuring FortiAnalyzer on page 138.
9. Click OK. The FortiAnalyzer serial number is verified.
10. Enter a Fabric name.
11. Ensure Allow other Security Fabric devices to join is enabled and add the interfaces.
12. Click OK.
Using the root FortiGate with disk to store historic user and device information
This backend implementation allows the root FortiGate in a Security Fabric to store historic user and device information
in a database on its disk. This will allow administrators to visualize users and devices over a period of time.
A new daemon, user_info_history, stores this data on the disk. The information source for the historical data will be the
user_info daemon, which would be recorded on the disk when user_info notifies user_info_history that a user has logged
out or the device is no longer connected.
FortiOS 6.4.2 Administration Guide 132
Fortinet Inc.
Fortinet Security Fabric
Add downstream devices
Downstream FortiGate devices can be securely added to the Security Fabric without sharing the password of the root
FortiGate.
Downstream device serial numbers can be authorized from the root FortiGate, or allowed to join by request. New
authorization requests include the device serial number, IP address, and HA members. HA members can include up to
four serial numbers and is used to ensure that, in the event of a fail over, the secondary FortiGate is still authorized.
A downstream device's certificate can also be used to authorize the device by uploaded the certificate to the root
FortiGate.
You can use the FortiIPAM service to automatically assign subnets to downstream FortiGates
to prevent duplicate IP addresses from overlapping within the same Security Fabric. See
Assign a subnet with the FortiIPAM service on page 416.
Pre-authorizing the downstream FortiGate
When a downstream Fortinet device's serial number or certificate is added to the trusted list on the root FortiGate, the
device can join the Security Fabric as soon as it connects. After the new device is authorized, connected FortiAP and
FortiSwitch devices are automatically included in the topology, where they can be authorized with one click.
The interface that connects to the downstream FortiGate must have Security Fabric Connection enabled.
To pre-authorize a FortiGate:
1. Configure the root FortiGate:
a. Go to Security Fabric > Fabric Connectors and double-click the Security Fabric Setup card.
b. In the Device authorization field click Edit. The Device Authorization window opens.
c. Enter the device's serial number in the Device/Serial field.
d. Select the Authorization type, either Serial Number or Certificate.
e. If Certificate is selected, click Browse to upload the downstream device's certificate from the management
computer.
f. Select the Action, either Accept or Deny.
g. Add more devices as required, then click OK.
h. Click OK.
2. Configure the downstream FortiGate:
a. On the downstream FortiGate, go to Security Fabric > Fabric Connectors and double-click the Security Fabric
Setup card.
b. Set Status to Enable.
c. Set Security Fabric role to Join Existing Fabric.
d. Enter the IP address of the root FortiGate in the Upstream FortiGate IP field.
e. Click OK.
FortiOS 6.4.2 Administration Guide 133
Fortinet Inc.
Fortinet Security Fabric
3. On the root FortiGate, go to Security Fabric > Physical Topology and verify that the downstream FortiGate that you
added appears in the Security Fabric topology.
Using LLDP
You can automatically prompt downstream FortiGate devices to join the Security Fabric using Link Layer Discovery
Protocol (LLDP) and interface role assignments.
1. On the root FortiGate, assign the LAN role to all interfaces that may connect to downstream FortiGate devices.
When the LAN role is assigned to an interface, LLDP transmission is enabled by default.
2. When a downstream FortiGate is installed, assign the WAN role to the interface that connects to the upstream
FortiGate.
When the WAN role is assigned, LLDP reception is enabled by default. The newly installed FortiGate uses LLDP to
discover the upstream FortiGate, and the administrator is prompted to configure the FortiGate to join the Security
Fabric.
3. On the root FortiGate, the new FortiGate must be authorized before it can join the Security Fabric.
If the network contains switches or routers, LLDP may not function as expected because some
devices do not pass LLDP packets.
Authorizing a downstream FortiGate
When you log in to an unauthorized, downstream FortiGate, the log in prompt includes the option to authorize the device
on the root FortiGate.
When the Security Fabric is disabled on the FortiGate, and a neighboring FortiGate is detected on the same network
using LLDP, the log in prompt gives the option to join the Security Fabric.
FortiOS 6.4.2 Administration Guide 134
Fortinet Inc.
Fortinet Security Fabric
To authorize a downstream FortiGate:
1. Log in to the unauthorized, downstream device.
2. On the Fabric Setup step, click Review authorization on root FortiGate.
A pop-up window opens to a log in screen for the root FortiGate.
3. Enter the log in credentials for the root FortiGate, then click Login.
A list of pending authorizations is shown.
4. Select Allow and then click OK to authorize the downstream FortiGate. You can also select Deny to reject the
authorization, or Later to postpone the decision to the next time that you log in.
When authorization is allowed, the pop-up window closes, and the log in prompt shows that the downstream
FortiGate has been authorized.
FortiOS 6.4.2 Administration Guide 135
Fortinet Inc.
Fortinet Security Fabric
5. Click Done to log in to the downstream FortiGate.
To join an existing fabric that is detected on the same network:
1. Log in to the device.
2. On the Fabric Setup step, enable Join Existing Fabric.
3. Authorize the FortiGate, as previously shown.
To review authorization on the downstream FortiGate:
1. Go to Security Fabric > Fabric Connectors.
2. In the gutter on the right side of the screen, click Review authorization on root FortiGate.
The root FortiGate pop-up window shows the state of the device authorization.
Device request
A device can request to join the Security Fabric from another FortiGate, but it must have the IP address of the root
FortiGate. The administrator of the root FortiGate must also authorize the device before it can join the Security Fabric.
The root FortiGate must have Security Fabric Connection enabled on the interface that the device connects to.
To enable FortiTelemetry on an interface:
1. Go to Network > Interfaces.
2. Edit the interface that the device that you authorizing to join the Security Fabric is connected to.
FortiOS 6.4.2 Administration Guide 136
Fortinet Inc.
Fortinet Security Fabric
3. Under Administrative Access, enable Security Fabric Connection.
4. Under Network, turn on Device Detection.
To join the Security Fabric by device request:
1. Connect to the unauthorized FortiGate or FortiWiFi device, and go to Security Fabric > Fabric Connectors and
double-click the Security Fabric Setup card.
2. For Status, click Enable.
3. Set Security Fabric role to Join Existing Fabric.
4. Set Upstream FortiGate IP to the IP address of the upstream FortiGate.
5. Connect to the root FortiGate and go to Security Fabric > Fabric Connectors. The new FortiGate appears in the
topology tree as unauthorized.
6. Click the unauthorized device and select Authorize to authorize the device.
CLI commands
Use the following commands to view, accept, and deny authorization requests, to view upstream and downstream
devices, and to list or test fabric devices:
Command Description
diagnose sys csf authorization View pending authorization requests on the root FortiGate.
pending-list
diagnose sys csf authorization Authorize a device to join the Security Fabric.
accept <serial-number-value>
diagnose sys csf authorization Deny a device from joining the Security Fabric.
deny <serial-number-value>
diagnose sys csf downstream Show connected downstream devices.
diagnose sys csf upstream Show connected upstream devices.
diagnose sys csf fabric-device list List all known fabric devices.
diagnose sys csf fabric-device Test connections to locally configured fabric devices.
test
Desynchronizing settings
By default, the settings for FortiAnalyzer logging, central management, sandbox inspection, and FortiClient EMS are
synchronized between all FortiGate devices in the Security Fabric. To disable the automatic synchronization of these
settings, use the following CLI command:
config system csf
set configuration-sync local
end
Deauthorizing a device
A device can be deauthorized to remove it from the Security Fabric.
FortiOS 6.4.2 Administration Guide 137
Fortinet Inc.
Fortinet Security Fabric
To deauthorize a device:
1. On the root FortiGate, go to Security Fabric > Fabric Connectors
2. In the topology tree, click the device and select Deauthorize.
After devices are deauthorized, the devices' serial numbers are saved in a trusted list that can be viewed in the CLI using
the show system csf command. For example, this result shows a deauthorized FortiSwitch:
show system csf
config system csf
set status enable
set group-name "Office-Security-Fabric"
set group-password ENC 1Z2X345V678
config trusted-list
edit "FGT6HD391806070"
next
edit "S248DF3X17000482"
set action deny
next
end
end
end
Configuring FortiAnalyzer
FortiAnalyzer is a required component for the Security Fabric. It allows the Security Fabric to show historical data for the
Security Fabric topology and logs for the entire Security Fabric.
For more information about using FortiAnalyzer, see the FortiAnalyzer Administration Guide.
To connect a FortiAnalyzer to the Security Fabric:
1. Enable FortiAnalyzer Logging on the root FortiGate. See Configure the root FortiGate on page 132.
2. On the FortiAnalyzer, go to System Settings > Network and click All Interfaces.
3. Edit the port that connects to the root FortiGate.
4. Set the IP Address/Netmask to the IP address that is used for the Security Fabric on the root FortiGate.
5. Click OK.
If the FortiGates have already been configured, it will now be listed as an unauthorized device.
6. Go to Device Manager > Devices Unauthorized. The unauthorized FortiGate devices are listed.
FortiOS 6.4.2 Administration Guide 138
Fortinet Inc.
Fortinet Security Fabric
7. Select the root FortiGate and downstream FortiGate devices in the list, then click Authorize. The Authorize Device
page opens.
8. Click OK to authorize the selected devices.
9. On the FortiGate devices, go to Security Fabric > Fabric Connectors and double-click the FortiAnalyzer Logging
card. The page will now show the ADOM on the FortiAnalyzer that the FortiGate is in, and the storage, analytics,
and archive usage.
Configuring other Security Fabric devices
This section contains information about configuring the following devices as part of the Fortinet Security Fabric:
l FortiGate Cloud on page 139
l FortiAnalyzer Cloud service on page 141
l FortiManager on page 145
l FortiManager Cloud service on page 146
l FortiSandbox on page 148
l FortiClient EMS on page 150
l FortiNAC on page 158
l FortiAP and FortiSwitch on page 160
l FortiMail on page 161
l Additional devices on page 163
Prerequisites
l FortiGate devices must either have VDOMs disabled or be running in split-task VDOM mode in order to be added to
the Security Fabric. See Virtual Domains on page 729.
l FortiGate devices must be operating in NAT mode.
FortiGate Cloud
FortiGate Cloud is a hosted security management and log retention service for FortiGate devices. It provides centralized
reporting, traffic analysis, configuration management, and log retention without the need for additional hardware or
software.
FortiGate Cloud offers a wide range of features:
l Simplified central management
FortiGate Cloud provides a central GUI to manage individual or aggregated FortiGate and FortiWiFi devices.
Adding a device to the FortiGate Cloud management subscription is straightforward. FortiGate Cloud has detailed
traffic and application visibility across the whole network.
l Hosted log retention with large default storage allocated
Log retention is an integral part of any security and compliance program, but administering a separate storage
system is onerous. FortiGate Cloud takes care of this automatically and stores the valuable log information in the
FortiOS 6.4.2 Administration Guide 139
Fortinet Inc.
Fortinet Security Fabric
cloud. Different types of logs can be stored, including Traffic, System Events, Web, Applications, and Security
Events.
l Monitoring and alerting in real time
Network availability is critical to a good end-user experience. FortiGate Cloud enables you to monitor your FortiGate
network in real time with different alerting mechanisms to pinpoint potential issues. Alerting mechanisms can be
delivered via email.
l Customized or pre-configured reporting and analysis tools
Reporting and analysis are your eyes and ears into your network’s health and security. Pre-configured reports are
available, as well as custom reports that can be tailored to your specific reporting and compliance requirements.
The reports can be emailed as PDFs, and can cover different time periods.
l Maintain important configuration information uniformly
The correct configuration of the devices within your network is essential for maintaining optimum performance and
security posture. In addition, maintaining the correct firmware (operating system) level allows you to take advantage
of the latest features.
l Service security
All communication (including log information) between the devices and the cloud is encrypted. Redundant data
centers are always used to give the service high availability. Operational security measures have been put in place
to make sure your data is secure — only you can view or retrieve it.
Registration and activation
Before you can activate a FortiGate Cloud account, you must first register your device.
FortiGate Cloud accounts can be registered manually through the FortiGate Cloud website, https://www.forticloud.com,
or you can easily register and activate your account directly from your FortiGate.
To activate your FortiGate Cloud account:
1. On your device, go to Dashboard > Status.
2. In the FortiGate Cloud widget, click the Not Activated > Activate button in the Status field.
3. A pane will open asking you to register your FortiGate Cloud account. Click Create Account, enter your information,
view and accept the terms and conditions, and then click OK.
4. A second dialogue window open , asking you to enter your information to confirm your account. This sends a
confirmation email to your registered email. The dashboard widget then updates to show that confirmation is
required.
5. Open your email, and follow the confirmation link it contains.
A FortiGate Cloud page will open, stating that your account has been confirmed. The Activation Pending message
on the dashboard will change to state the type of account you have, and will provide a link to the FortiGate Cloud
portal.
Enabling logging to FortiGate Cloud
To enable logging to FortiGate Cloud:
1. Go to Security Fabric > Fabric Connectors > Cloud Logging or Log & Report > Log Settings.
2. Enable Cloud Logging.
FortiOS 6.4.2 Administration Guide 140
Fortinet Inc.
Fortinet Security Fabric
3. Select an upload option: Realtime, Every Minute, or Every 5 Minutes (default).
4. Click Apply.
Logging into the FortiGate Cloud portal
Once logging has been configured and you have registered your account, you can log into the FortiGate Cloud portal
and begin viewing your logging results. There are two methods to reach the FortiGate Cloud portal:
l If you have direct network access to the FortiGate:
a. Go to Dashboard > Status.
b. In the FortiGate Cloud widget, in the Status field, click Activated > Launch Portal, or, in the Licenses widget,
click FortiCare Support > Launch Portal.
l If you do not have access to the FortiGate’s interface, visit the FortiGate Cloud website (https://www.forticloud.com)
and log in remotely, using your email and password. It will ask you to confirm the FortiGate Cloud account you are
connecting to and then you will be granted access.
Cloud sandboxing
FortiGate Cloud can be used for automated sample tracking, or sandboxing, for files from a FortiGate. This allows
suspicious files to be sent to be inspected without risking network security. If the file exhibits risky behavior, or is found to
contain a virus, a new virus signature is created and added to the FortiGuard antivirus signature database.
To configure cloud sandboxing:
1. Go to Security Fabric > Fabric Connectors and double-click the FortiSandbox card.
2. For status, click Enable.
3. Set the Type to FortiSandbox Cloud.
By default, the FortiSandbox Cloud option is not visible. See Feature visibility on page 821
for instructions on making it visible.
4. Select the FortiSandbox cloud region.
5. Click OK.
Sandboxing results are shown on the Sandbox tab in the FortiGate Cloud portal.
For more information about FortiGate Cloud, see the FortiGate Cloud documentation.
FortiAnalyzer Cloud service
FortiGate supports the FortiAnalyzer Cloud service for event logging.
Traffic and security logs are not supported in the initial version of FortiAnalyzer Cloud.
When FortiAnalyzer Cloud is licensed and enabled (see Deploying FortiAnalyzer Cloud for more information), all
event logs are sent to FortiAnalyzer Cloud by default. All traffic logs, security logs, and archive files are not sent to
FortiAnalyzer Cloud.
FortiOS 6.4.2 Administration Guide 141
Fortinet Inc.
Fortinet Security Fabric
FortiAnalyzer Cloud differs from FortiAnalyzer in the following ways:
l You cannot enable FortiAnalyzer Cloud in vdom override-setting when global FortiAnalyzer Cloud is
disabled.
l You must use the CLI to retrieve and display logs sent to FortiAnalyzer Cloud. The FortiOS GUI is not supported.
l You cannot enable FortiAnalyzer Cloud and FortiGate Cloud at the same time.
Sample settings panes
In the FortiOS Security Fabric > Fabric Connectors > Cloud Logging card settings page, FortiAnalyzer Cloud is grayed
out when you do not have a FortiAnalyzer Cloud entitlement.
When you have a FortiAnalyzer Cloud entitlement, FortiAnalyzer Cloud is available.
You can also view the FortiAnalyzer Cloud settings in the Log & Report > Log Settings pane.
In FortiAnalyzer Cloud, you can view logs from FortiOS in the Event > All Types pane.
FortiOS 6.4.2 Administration Guide 142
Fortinet Inc.
Fortinet Security Fabric
To enable fortianalyzer-cloud using the CLI:
config log fortianalyzer-cloud setting
set status enable
set ips-archive disable
set access-config enable
set enc-algorithm high
set ssl-min-proto-version default
set conn-timeout 10
set monitor-keepalive-period 5
set monitor-failure-retry-period 5
set certificate ''
set source-ip ''
set upload-option realtime
end
config log fortianalyzer-cloud filter
set severity information
set forward-traffic disable
set local-traffic disable
set multicast-traffic disable
set sniffer-traffic disable
set anomaly disable
set voip disable
set dlp-archive disable
set dns disable
set ssh disable
set ssl disable
set cifs disable
set filter ''
set filter-type include
end
To disable fortianalyzer-cloud for a specific VDOM using the CLI:
config log setting
set faz-override enable
end
config log fortianalyzer-cloud override-setting
set status disable
FortiOS 6.4.2 Administration Guide 143
Fortinet Inc.
Fortinet Security Fabric
end
To set fortianalyzer-cloud filter for a specific vdom using the CLI:
config log setting
set faz-override enable
end
config log fortianalyzer-cloud override-setting
set status enable
end
config log fortianalyzer-cloud override-filter
set severity information
set forward-traffic disable
set local-traffic disable
set multicast-traffic disable
set sniffer-traffic disable
set anomaly disable
set voip disable
set dlp-archive disable
set dns disable
set ssh disable
set ssl disable
set cifs disable
set filter ''
set filter-type include
end
To display fortianalyzer-cloud log using the CLI:
execute log filter device fortianalyzer-cloud
execute log filter category event
execute log display
Sample log
date=2019-05-01 time=17:57:45 idseq=60796052214644736 bid=100926 dvid=1027 itime="2019-05-01
17:57:48" euid=3 epid=3 dsteuid=0 dstepid=3 logver=602000890 logid=0100032002
type="event" subtype="system" level="alert" srcip=10.6.30.254 dstip=10.6.30.9
action="login" msg="Administrator ddd login failed from https(10.6.30.254) because of
invalid user name" logdesc="Admin login failed" sn="0" user="ddd" ui="https
(10.6.30.254)" status="failed" reason="name_invalid" method="https"
eventtime=1556758666274548325 devid="FG5H1E5818900076" vd="root" dtime="2019-05-01
17:57:45" itime_t=1556758668 devname="FortiGate-501E"
date=2019-05-01 time=17:57:21 idseq=60796052214644736 bid=100926 dvid=1027 itime="2019-05-01
17:57:23" euid=3 epid=3 dsteuid=0 dstepid=3 logver=602000890 logid=0100044546
type="event" subtype="system" level="information" action="Edit" msg="Edit
log.fortianalyzer-cloud.filter " logdesc="Attribute configured" user="admin" ui="ssh
(10.6.30.254)" cfgtid=164757536 cfgpath="log.fortianalyzer-cloud.filter"
cfgattr="severity[information->critical]" eventtime=1556758642413367644
devid="FG5H1E5818900076" vd="root" dtime="2019-05-01 17:57:21" itime_t=1556758643
devname="FortiGate-501E"
FortiOS 6.4.2 Administration Guide 144
Fortinet Inc.
Fortinet Security Fabric
FortiManager
When a FortiManager device is added to the Security Fabric, it automatically synchronizes with any connected
downstream devices.
To add a FortiManager to the Security Fabric, configure it on the root FortiGate. The root FortiGate then pushes this
configuration to downstream FortiGate devices. The FortiManager provides remote management of FortiGate devices
over TCP port 541. The FortiManager must have internet access for it to join the Security Fabric.
Once configured, the FortiGate can receive antivirus and IPS updates, and allows remote management through
FortiManager or the FortiGate Cloud service. The FortiGate management option must be enabled so that the FortiGate
can accept management updates to its firmware and FortiGuard services.
To add a FortiManager to the Security Fabric using the CLI:
config system central-management
set type fortimanager
set fmg {<IP_address> | <FQDN_address>}
end
To add a FortiManager to the Security Fabric using the GUI:
1. On the root FortiGate, go to Security Fabric > Fabric Connectors and double-click the FortiManager card.
2. For Status, click Enable.
3. For Type, click On-Premise.
4. Enter the IP/Domain Name of the FortiManager.
5. Click OK.
6. On the FortiManager, go to Device Manager and find the FortiGate in the Unauthorized Devices list.
7. Select the FortiGate device or devices, and click Authorize in the toolbar.
8. In the Authorize Device pop-up, adjust the device names as needed, then click OK.
For more information about using FortiManager, see the FortiManager Administration Guide.
FortiOS 6.4.2 Administration Guide 145
Fortinet Inc.
Fortinet Security Fabric
FortiManager Cloud service
This cloud-based SaaS management service is available through FortiManager. This service is included in FortiCloud
accounts with a FortiManager Cloud account level subscription (ALCI).
Once the FortiGate has acquired a contract named FortiManager Cloud, FortiCloud creates a cloud-based FortiManager
instance under the user account. You can launch the portal for the cloud-based FortiManager from FortiCloud, and its
URL starts with the User ID.
You can use a FortiGate with a contract for FortiManager Cloud to configure central management by using the FQDN of
fortimanager.forticloud.com. A FortiGate-FortiManager tunnel is established between FortiGate and the FortiManager
instance.
After the tunnel is established, you can execute FortiManager functions from the cloud-based FortiManager portal.
To manage FortiGate with FortiManager Cloud:
1. In the FortiCare portal, ensure you have a product entitlement for FortiManager Cloud.
a. Go to Asset > Information > Entitlement.
b. Take note of your user ID number in the top-right corner.
2. Click the FortiCloud icon in the upper-right corner.
FortiOS 6.4.2 Administration Guide 146
Fortinet Inc.
Fortinet Security Fabric
3. Under CLOUD MANAGEMENT, select FortiManager.
The FortiManager portal opens. The URL incorporates the user ID for the dedicated instance.
4. In FortiOS, enable FortiManager Cloud.
a. Go to Security Fabric > Fabric Connectors and double-click the FortiManager card.
b. For Status, click Enable.
c. For Type, click FortiManager Cloud.
d. Click OK.
The FortiManager Cloud button can only be selected if you have a FortiManager Cloud
product entitlement.
5. In the FortiManager Cloud instance, go to Device Manager and authorize the FortiGate. See Authorizing devices for
more information.
When using FortiGate to enable FortiManager Cloud, the FortiGate appears as an unauthorized device.
After authorizing the FortiGate, it becomes a managed device.
FortiOS 6.4.2 Administration Guide 147
Fortinet Inc.
Fortinet Security Fabric
In FortiOS, the Security Fabric > Fabric Connectors page now displays green arrow in the FortiManager card
because FortiManager Cloud is registered.
FortiSandbox
The Security Fabric supports FortiSandbox appliances and FortiSandbox Cloud. A FortiGate Cloud account is not
required.
To use FortiSandbox in a Security Fabric, connect the FortiSandbox to the Security Fabric, then configure an antivirus
profile to send files to the FortiSandbox. Sandbox inspection can also be used in web filter profiles.
FortiSandbox settings are configured on the root FortiGate of the Security Fabric. After configuration, the root FortiGate
pushes the settings to other FortiGate devices in the Security Fabric.
Either a FortiSandbox appliance or FortiSandbox Cloud can be configured. If one is
configured, then the other will not be available.
To add a FortiSandbox appliance to the Security Fabric:
1. On the root FortiGate, go to Security Fabric > Fabric Connectors and double-click the FortiSandbox card.
2. Set Status to Enable.
3. In the Server field, enter the FortiSandbox device's IP address.
4. Optionally, enter a Notifier email.
5. Click OK.
6. On the FortiSandbox device, go to Scan Input > Device.
7. Edit the root FortiGate.
8. Under Permissions, check the Authorized box.
9. Click OK.
10. Authorize the rest of the FortiGate devices that are in the Security Fabric.
FortiOS 6.4.2 Administration Guide 148
Fortinet Inc.
Fortinet Security Fabric
To add a FortiSandbox cloud instance to the Security Fabric:
1. On the root FortiGate, go to Security Fabric > Fabric Connectors and double-click the FortiSandbox Cloud card.
2. Set Status to Enable.
3. Select the FortiSandbox cloud Region from the dropdown list. Data from your network will only be sent to servers in
the selected region.
4. Click OK.
If FortiSandbox Cloud is not visible in the GUI, run the execute forticloud-sandbox
region and execute forticloud-sandbox update commands.
Antivirus profiles
An antivirus profile must be configured to send files to the FortiSandbox.
To configure an antivirus profile:
1. On the FortiGate, go to Security Profile > AntiVirus.
2. Create, edit, or clone an antivirus profile.
3. Under APT Protection Options, set Send Files to FortiSandbox Appliance for Inspection to All Supported Files.
4. Optionally, configure file exceptions.
5. Enable Use FortiSandbox database.
6. Click OK.
Web Filter profiles
Sandbox inspection can be used in Web Filter profiles.
FortiOS 6.4.2 Administration Guide 149
Fortinet Inc.
Fortinet Security Fabric
To configure a web filter profile:
1. On the FortiGate, go to Security Profiles > Web Filter.
2. Create, edit, or clone a profile.
3. Under Static URL Filter, enable Block malicious URLs discovered by FortiSandbox.
4. Click OK.
FortiClient EMS
The FortiGate Security Fabric root device can link to FortiClient Endpoint Management System (EMS) and FortiClient
EMS Cloud (a cloud-based EMS solution) for endpoint connectors and automation. Up to three EMS servers can be
added to the Security Fabric, including a FortiClient EMS Cloud server. EMS settings are synchronized between all
fabric members.
To enable cloud-based EMS services, the FortiGate must be registered to FortiCloud with an appropriate user account.
The following examples presume that the EMS certificate has already been configured.
To add an on-premise FortiClient EMS server to the Security Fabric in the GUI:
1. On the root FortiGate, go to System > Feature Visibility and enable Endpoint Control.
2. Go to Security Fabric > Fabric Connectors.
3. Click Create New and click FortiClient EMS.
4. For Type, click FortiClient EMS.
5. Enter a name and IP address.
6. Click OK.
A window appears to verify the EMS server certificate:
FortiOS 6.4.2 Administration Guide 150
Fortinet Inc.
Fortinet Security Fabric
7. Click Accept.
The FortiClient EMS Status section displays a Successful connection and an Authorized certificate:
To add a FortiClient EMS Cloud server to the Security Fabric in the GUI:
1. Go to Security Fabric > Fabric Connectors.
2. Click Create New and click FortiClient EMS.
3. Set Type to FortiClient EMS Cloud.
4. Enter a name.
5. Click OK.
A window appears to verify the EMS server certificate.
6. Click Accept.
The FortiClient EMS Status section displays a Successful connection and an Authorized certificate.
FortiOS 6.4.2 Administration Guide 151
Fortinet Inc.
Fortinet Security Fabric
To test connectivity with the EMS server:
1. Go to Security Fabric > Fabric Connectors and double-click the FortiClient EMS or FortiClient EMS Cloud card.
2. In the FortiClient EMS Status section under Connection, click Refresh.
To add an on-premise FortiClient EMS server to the Security Fabric in the CLI:
config endpoint-control fctems
edit <ems_name>
set server <ip_address>
set certificate <string>
set https-port <integer>
set source-ip <ip_address>
next
end
The https-port is the EMS HTTPS access port number, and the source-ip is the REST API call source IP address.
To add a FortiClient EMS Cloud server to the Security Fabric in the CLI:
config endpoint-control fctems
edit <name>
set fortinetone-cloud-authentication enable
set certificate <string>
next
end
To verify an EMS certificate in the CLI:
# execute fctems verify ems137
Subject: C = CA, ST = bc, L = burnaby, O = devqa, OU = top3, CN =
sys169.qa.fortinet.cm, emailAddress = [email protected]
Issuer: CN = 155-sub1.fortinet.com
Valid from: 2017-12-05 00:37:57 GMT
Valid to: 2027-12-02 18:08:13 GMT
Fingerprint: D3:7A:1B:84:CC:B7:5C:F0:A5:73:3D:BB:ED:21:F2:E0
Root CA: No
Version: 3
Serial Num:
01:86:a2
Extensions:
Name: X509v3 Basic Constraints
Critical: yes
Content:
CA:FALSE
Name: X509v3 Subject Key Identifier
Critical: no
Content:
35:B0:E2:62:AF:9A:7A:E6:A6:8E:AD:CB:A4:CF:4D:7A:DE:27:39:A4
Name: X509v3 Authority Key Identifier
Critical: no
Content:
FortiOS 6.4.2 Administration Guide 152
Fortinet Inc.
Fortinet Security Fabric
keyid:66:54:0F:78:78:91:F2:E4:08:BB:80:2C:F6:BC:01:8E:3F:47:43:B1
DirName:/C=CA/ST=bc/L=burnaby/O=devqa/OU=top3/CN=fac155.fortinet.com/emailAddress=xyguo@fort
inet.com
serial:01:86:A4
Name: X509v3 Subject Alternative Name
Critical: no
Content:
DNS:sys169.qa.fortinet.cm
Name: X509v3 Key Usage
Critical: no
Content:
Digital Signature, Non Repudiation, Key Encipherment, Data Encipherment, Key
Agreement, Certificate Sign, CRL Sign, Encipher Only, Decipher Only
Name: X509v3 Extended Key Usage
Critical: no
Content:
TLS Web Server Authentication, TLS Web Client Authentication
EMS configuration needs user to confirm server certificate.
Do you wish to add the above certificate to trusted remote certificates? (y/n)y
Troubleshooting
Certificate not trusted
When configuring a new connection to an EMS server, the certificate might not be trusted.
When you click Authorize, a warning is shown: The server certificate cannot be authenticated with installed CA
certificates. Please install its CA certificates on this FortiGate.
FortiOS 6.4.2 Administration Guide 153
Fortinet Inc.
Fortinet Security Fabric
In the CLI, an error message is shown when you try to verify the certificate:
# execute fctems verify Win2K16-EMS
certificate not configured/verified: 2
Could not verify server certificate based on current certificate authorities.
Error 1--92-60-0 in get SN call: EMS Certificate is not signed by a known CA.
The default FortiClient EMS certificate that is used for the SDN connection is signed by the CA certificate that is saved on
the Windows server when FortiClient EMS is first installed. It can be manually exported and installed on the FortiGate.
To manually export and install the certificate on to the FortiGate:
1. Export the EMS certificate on the server that EMS is installed on:
a. On the Windows server that EMS is installed on, go to Settings > Manage computer certificates.
b. In the certificate management module, go to Trusted Root Certification Authorities > Certificates.
c. Right click on the certificate issued by FortiClient Enterprise Management Server and select All Tasks > Export.
d. The Certificate Export Wizard opens. Click Next.
e. Select Base-64 encoded X.509, then click Next.
f. Enter a file name for the certificate and click Browse to select the folder where it will be located, then click Next.
g. Review the settings, then click Finish. The certificate is downloaded to the specified folder.
2. On the FortiGate, import the certificate:
a. Go to System > Certificate. By default, the Certificate option is not visible, see Feature visibility on page 821 for
information.
b. Click Import > CA Certificate.
c. Set Type to File, and click Upload to import the certificate from the management computer.
d. Click OK. The imported certificate is shown in the Remote CA Certificate section of the certificate table.
3. Try to authorize the certificate on the FortiGate:
a. Go to Security Fabric > Fabric Connectors and edit the FortiClient EMS connector. The connection status
should now say that the certificate is not authorized.
b. Click Authorize. The following warning is shown:
FortiOS 6.4.2 Administration Guide 154
Fortinet Inc.
Fortinet Security Fabric
The warning can also be seen in the CLI:
# execute fctems verify Win2K16-EMS
failure in certificate configuration/verification: -4
Could not verify EMS. Error 1--94-0-401 in get SN call: Authentication denied.
4. Authorize the FortiGate on EMS:
a. Log in to the EMS server console and go to Administration > Fabric Devices.
b. Select the serial number of the FortiGate device, then click Authorize.
5. Try to authorize the certificate on the FortiGate again:
a. On the FortiGate, go to Security Fabric > Fabric Connectors and edit the FortiClient EMS connector.
b. Click Authorize.
c. When presented with the EMS server certificate, click Accept to accept the certificate.
Your connection should now be successful and authorized.
d. Click OK.
Synchronizing FortiClient EMS tags and configurations
A new option under the FortiClient EMS settings consolidates the setup of EMS connectors to support EMS tags. EMS
tags are pulled and automatically synced with the EMS server. They are converted into read-only dynamic firewall
addresses that can be used in firewall policies, routing, and so on.
These examples presume the following have been configured in FortiClient EMS:
FortiOS 6.4.2 Administration Guide 155
Fortinet Inc.
Fortinet Security Fabric
l Tags have been created on the Compliance Verification > Compliance Verification Rules page.
l There are registered users who match the defined tags that are visible on the Compliance Verification > Host Tag
Monitor page.
To configure FortiClient EMS with tag synchronization in the GUI:
1. Configure the EMS Fabric Connector:
a. On the root FortiGate, go to Security Fabric > Fabric Connectors.
b. Click Create New and click FortiClient EMS.
c. Enable Synchronize firewall addresses.
d. Configure the other settings as needed and validate the certificate.
e. Click OK.
2. Go to Policy & Objects > Addresses and hover over the EMS tag to view which IPs it resolves to.
FortiOS 6.4.2 Administration Guide 156
Fortinet Inc.
Fortinet Security Fabric
3. Configure a firewall policy:
a. Go to Policy & Objects > Firewall Policy and create a new policy.
b. For the Source Address, add the EMS tag dynamic address.
c. Configure the other settings as needed.
d. Click OK.
To configure FortiClient EMS with tag synchronization in the CLI:
1. Configure the EMS Fabric Connector:
config endpoint-control fctems
edit "ems137"
set fortinetone-cloud-authentication disable
set server "172.16.200.137"
set https-port 443
set source-ip 0.0.0.0
set pull-sysinfo enable
set pull-vulnerabilities enable
set pull-avatars enable
set pull-tags enable
set call-timeout 5000
set certificate "REMOTE_Cert_1"
next
end
2. Verify which IPs the dynamic firewall address resolves to:
# diagnose firewall dynamic list
List all dynamic addresses:
FCTEMS0580226579_ems137_vuln_critical_tag: ID(118)
ADDR(10.1.100.120)
ADDR(10.1.100.198)
FortiOS 6.4.2 Administration Guide 157
Fortinet Inc.
Fortinet Security Fabric
FCTEMS0580226579_ems137_winscp_tag: ID(155)
ADDR(100.100.100.141)
FCTEMS0580226579_ems137_win10_tag: ID(182)
ADDR(10.1.100.120)
# diagnose firewall dynamic address FCTEMS0580226579_ems137_vuln_critical_tag
FCTEMS0580226579_ems137_vuln_critical_tag: ID(118)
ADDR(10.1.100.120)
ADDR(10.1.100.198)
Total dynamic list entries: 1.
Total dynamic addresses: 2
Total dynamic ranges: 0
3. Configure a firewall policy that uses the EMS tag dynamic firewall address as a source.
FortiNAC
A FortiNAC device can be added to the Security Fabric on the root FortiGate. After the device has been added and
authorized, you can log in to the FortiNAC from the FortiGate topology views.
Adding a FortiNAC to the Security Fabric requires a FortiNAC with a license issued in the year
2020 or later that includes an additional certificate. The device cannot be added if it has an
older license. Use the licensetool in the FortiNAC CLI to determine if your license includes
the additional certificate.
To add a FortiNAC to the Security Fabric:
1. On the FortNAC, configure telemetry and input the IP address of the root FortiGate. See Security Fabric Connection
in the FortiNAC Administration Guide for more information.
2. On the root FortiGate, authorize the FortiNAC.
3. Verify the connection status in the topology views.
To authorize the FortiNAC on the root FortiGate in the GUI:
1. Go to Security Fabric > Fabric Connectors.
2. The FortiNAC device will be highlighted in the topology list in the right panel with the status Waiting for
Authorization.
FortiOS 6.4.2 Administration Guide 158
Fortinet Inc.
Fortinet Security Fabric
3. Click on the highlighted FortiNAC and select Authorize.
Optionally, you can also deny authorization to the FortiNAC to remove it from the list.
To authorize the FortiNAC on the root FortiGate in the CLI:
config system csf
config trusted-list
edit "FNVMCATM20000306"
set action accept
next
end
end
To verify the connection status:
1. After the FortiNAC is authorized, go to Security Fabric > Physical Topology and confirm that it is included in the
topology.
2. Go to Security Fabric > Logical Topology and confirm the FortiNAC is also displayed there.
FortiOS 6.4.2 Administration Guide 159
Fortinet Inc.
Fortinet Security Fabric
3. Run the following command in the CLI to view information about the FortiNAC device's status:
# diagnose sys csf downstream-devices fortinac
{
"path":"FG5H1E5818900126:FNVMCATM20000306",
"mgmt_ip_str":"10.1.100.197",
"mgmt_port":0,
"admin_port":8443,
"serial":"FNVMCATM20000306",
"host_name":"adnac",
"device_type":"fortinac",
"upstream_intf":"port2",
"upstream_serial":"FG5H1E5818900126",
"is_discovered":true,
"ip_str":"10.1.100.197",
"downstream_intf":"eth0",
"authorizer":"FG5H1E5818900126",
"idx":1
}
To log in to the FortiNAC from the FortiGate:
1. On the FortiGate, go to Security Fabric > Physical Topology or Security Fabric > Logical Topology.
2. Click on the FortiNAC and select Login to <serial_number>.
A new tab will open to the FortiNAC log in page.
3. Enter the username and password to log in to the FortiNAC.
FortiAP and FortiSwitch
FortiAP and FortiSwitch devices can be authorized in the Security Fabric with one click. After connecting a FortiAP or
FortiSwitch device to an authorized FortiGate, it will automatically be listed in the topology tree.
If the default auto-auth-extension-device settings on the FortiAP or FortiSwitch have
been modified, manual authorization in the Security Fabric may not be required.
For more information about configuring FortiAPs, see Configuring the FortiGate interface to manage FortiAP units and
Discovering, authorizing, and deauthorizing FortiAP units.
For more information about configuring FortiSwitches, see Using the FortiGate GUI.
FortiOS 6.4.2 Administration Guide 160
Fortinet Inc.
Fortinet Security Fabric
To authorize FortiAP and FortiSwitch devices:
1. Connect the FortiAP or FortiSwitch device to a FortiGate.
2. On the root FortiGate, go to Security Fabric > Fabric Connectors. The new device is shown in the Topology tree.
3. Click the device and select Authorize.
FortiMail
FortiMail can be added to the Security Fabric using either the gutter on the Fabric Connectors page, or by using the
FortiMail certificate.
Authorizing using FortiOS
If the FortiMail was added to the Security Fabric but not pre-authorized, you can authorize it in FortiOS on the Fabric
Connectors page.
To authorize FortiMail:
1. Go to Security Fabric > Fabric Connectors.
2. In the topology tree, hover over the FortiMail and click Authorize.
FortiOS 6.4.2 Administration Guide 161
Fortinet Inc.
Fortinet Security Fabric
3. Verify the certificate is correct, then click Accept.
Authorizing using FortiMail
To authorize FortiMail using a third-party or default certificate:
1. Log in to FortiMail.
2. Download the certificate. For example, in Chrome:
a. In the left side of the address bar, click the icon to view the site information.
b. Click Certificate.
c. Click the Details tab, then click Copy to File.
d. The Certificate Export Wizard opens. Click Next to continue.
e. For the file format, select Base-64 encoded X.509 (.CER), then click Next.
f. Browse to the folder location and enter a file name, then click Next.
g. Click Finish, then click OK to close the dialog box.
3. In FortiOS, go to Security Fabric > Fabric Connectors and double-click the Security Fabric Setup card.
4. Beside Device authorization, click Edit and configure the following:
a. Enter the FortiMail serial number.
b. For Authorization type, select Serial Number.
c. For Certificate, upload the .CER file you saved previously.
FortiOS 6.4.2 Administration Guide 162
Fortinet Inc.
Fortinet Security Fabric
d. Click OK.
To join the Security Fabric from FortiMail:
1. Go to System > Customization and click the Corporate Security Fabric tab.
2. Click the toggle to enable the Fabric.
3. Enter the Upstream IP Address (root FortiGate) and the Management IP of the FortiMail.
4. Click Apply.
5. In FortiOS, go to Security Fabric > Fabric Connectors. The authorized FortiMail is now shown in the topology tree.
Additional devices
The following Fortinet devices are supported by the Security Fabric:
l FortiADC
l FortiDDoS
l FortiSandbox
l FortiMail on page 161
l FortiWeb
l FortiWLC
Security Fabric supports standalone FortiSandbox devices, FortiSandbox HA-Cluster primary,
and FortiSandbox cluster IP.
In FortiOS, the device details can be shown in the Security Fabric and Fabric Device dashboard widgets, as well as the
Fabric Connectors page, and physical and logical topologies.
To add one or more of the devices to the Security Fabric in the GUI:
1. On the root FortiGate, go to Security Fabric > Fabric Connectors.
2. Click Create New and select Fabric Device.
FortiOS 6.4.2 Administration Guide 163
Fortinet Inc.
Fortinet Security Fabric
3. Enter the Name, IP, HTTPS port for the device.
FortiSandbox only supports HTTPS port 443.
4. Click Generate to generate an access token. The Generate Access Token pane opens.
a. Enter the device's username and password.
b. Click OK.
5. Click OK.
6. Add more devices as required.
The additional devices are shown on the Fabric Connectors page under Other Fortinet Products and in the
Topology tree.
To add one or more of the devices to the Security Fabric in the CLI:
config system csf
...
config fabric-device
edit "FortiADC"
set device-ip 172.18.64.36
set access-token xxxxxx
next
end
end
FortiOS 6.4.2 Administration Guide 164
Fortinet Inc.
Fortinet Security Fabric
Using the Security Fabric
Dashboard widgets
Security Fabric widgets can be added to FortiGate dashboards, including:
l Security Fabric status on page 165
l Fabric Device on page 166
l FortiGate Cloud on page 166
Security Fabric status
The Security Fabric status widget shows a summary of the devices in the Security Fabric.
Hover the cursor over the top icons to view pop-ups showing the statuses of the devices in the fabric.
The device tree shows devices that are connected, or could be connected, to you Security Fabric, according to the
following color scheme:
l Blue: connected to the network
l Gray: not configured or not detected
l Red: no longer connected or not authorized
Hover over a device in the tree to view details about the device, such as it's serial number, operation mode, IP address,
CPU and memory usage, and others, depending on the device type.
Unauthorized FortiAP and FortiSwitch devices are highlighted in the list, and can be authorized by clicking on the device
name.
FortiOS 6.4.2 Administration Guide 165
Fortinet Inc.
Fortinet Security Fabric
Fabric Device
The Fabric Device widget shows statistics and system information about the selected fabric device.
For a FortiMail device, the widget can show:
l Mail Statistics: a chart of the total messages and total spam messages over time.
l Statistics Summary: a pie chart summarizes mail statistics.
l System Information: The FortiMail System Information widget
l System Usage: System usage information, such as CPU, memory, and disk usage, as well as the number of active
sessions.
FortiGate Cloud
The FortiGate Cloud widget shows the FortiGate Cloud status and information. If your account is not activated, you can
activate it from the widget.
To activate your FortiGate Cloud account:
1. Click on the Not Activated button and select Activate. The Activate FortiGate Cloud pane opens.
2. If you already have an account:
a. Fill in your email address, password, country or region, and reseller.
b. Click OK.
3. If you are creating an account:
a. In the FortiCloud field select Create Account.
b. Fill in all of the required information.
c. Click OK.
FortiOS 6.4.2 Administration Guide 166
Fortinet Inc.
Fortinet Security Fabric
Topology
The full Security Fabric topology can be viewed on the root FortiGate. Downstream FortiGate devices' topology views do
not include upstream devices.
The Physical Topology shows the physical structure of your network, including all connected devices and the
connections between them. The Logical Topology shows information about the interfaces that connect devices to the
Security Fabric. Only Fortinet devices are shown in the topologies.
In both topology pages, you can use filtering and sorting options to control the information that is shown. Hover the
cursor over a device icon, port number, or endpoint to open a tooltip that shows information about that specific device,
port, or endpoint. Right-click on a device to log in to it or to deauthorize it. Right-click on an endpoint to perform various
tasks, including drilling down for more details on sources or compromised hosts, quarantining the host, and banning the
IP address.
The small number that might be shown on the top right corner of a device icon is the number of security ratings
recommendations or warnings for that device. The color of the circle shows the severity of the highest security rating
check that failed. Clicking it opens the Security Rating page. See Security rating on page 214 for more information.
Servers and server clusters are represented by squares with rounded corners. They are grouped separately from
circular endpoints. Devices are grouped by type and are colored based on their risk level. Endpoint groups are
represented by donut charts or bubble packs depending on the current view settings (see Endpoint groups for more
information). The size of the bubbles in the topology vary based on traffic volume.
AWS assets are grouped by AWS security groups or subnets, and information about detected Common Vulnerabilities
and Exposures (CVEs), as well as the instance details and ID, are shown.
Views
The topology views can be focused using filters and by sorting in different ways to help you locate the information that
you need.
Select one of Access Device or No Access Device to only show access or no access devices in the physical topology.
From the Endpoint Option dropdown list, select one of the following views:
FortiOS 6.4.2 Administration Guide 167
Fortinet Inc.
Fortinet Security Fabric
l Device Traffic: Organize devices by traffic.
l Device Count: Organize devices by the number of devices connected to it.
l Device Operating System: Organize devices by operating system.
l Device Hardware Vendor: Organize devices by hardware vendor.
l Risk: Only include devices that have endpoints with medium, high, or critical risk values of the specified type: All,
Compromised Host, Vulnerability, or Threat Score.
l No Devices: Do not show endpoints.
The time period dropdown list filters the view by time. Options include: now (real time), 5 minutes, 1 hour, 24 hours, or 7
days.
Endpoint groups
The Device Traffic and Device Count views display endpoint groups as donut charts, with the total number of endpoints
in the group in the center of the chart. Each sector of the donut chart represents a different endpoint operating system.
To zoom in on a donut chart, click any chart sector. Each sector represents a different endpoint OS. Hovering over each
sector allows you to see the OS that the sector represents and the number of endpoints that have that OS installed.
FortiOS 6.4.2 Administration Guide 168
Fortinet Inc.
Fortinet Security Fabric
In this example, the endpoint group contains a total of nine endpoints, with the following OSes installed:
Donut sector color OS Number of endpoints
Orange Linux 2
Green FortiMail 1
Red FortiManager 1
Blue Other 5
To view the endpoint group in a bubble pack display, click the + button in the center of the donut chart. You can view
each individual endpoint in the bubble pack view.
FortiOS 6.4.2 Administration Guide 169
Fortinet Inc.
Fortinet Security Fabric
WAN cloud
The WAN cloud icon includes a dropdown menu for selecting where the destination data comes from. The available
options are: Internet, Owner, IP Address, and Country/Region. These options are only available when the filtering is
based on Device Traffic.
When Owner is selected, the destination hosts are shown as donut charts that show the percentage of internal (with
private IP addresses) and Internet hosts. Hover over either color in the chart to see additional information.
To view more details, right-click on the chart and select Destination Owner Details. The Top Destination Owners by
Bytes widget opens. Click the green icon (Standalone FortiView page icon) to add the widget to a new dashboard.
Alternatively, you can add the FortiView Destination Owners widget as a standalone page or to an existing dashboard
(see Adding FortiView widgets on page 91).
FortiAP and FortiSwitch devices
Newly discovered FortiAP and FortiSwitch devices are initial shown in the topologies with gray icons to indicate that they
have not been authorized. To authorize a device, click on the device icon or name and select Authorize. Once
authorized, the device icon will turn blue.
Right-click on an authorized FortiAP device to Deauthorize or Restart the device. Right-click on a FortiSwitch device to
Deauthorize, Restart, or Upgrade the device, or to Connect to the CLI.
FortiOS 6.4.2 Administration Guide 170
Fortinet Inc.
Fortinet Security Fabric
FortiAP and FortiSwitch links are enhanced to show link aggregation groups for the inter-switch link (ISL-LAG). To
differentiate them from physical links, ISL-LAG links are shown with a thicker line. The endpoint circles can also be used
as a reference to identify ISL-LAG groups that have more than two links.
Critical risks
Click the Critical Risks button to see a list of endpoints that are deemed critical risks, organized by threat severity. These
are the red endpoints in the current topology view.
For each endpoint, the user's photo, name, IP address, email address, and phone number are shown. The number of
vulnerabilities of each severity is shown, and if the IoC verdict is that the endpoint is compromised.
If applicable, the endpoint's host can be quarantined or their IP address banned, by clicking the Quarantine Host on Ban
IP button.
The dropdown menu also provides options to drill down to more information on compromised hosts or endpoint
vulnerabilities.
Click Drill Down to Compromised Hosts to open the Top Compromised Hosts page that shows a summary for the
selected endpoint.
FortiOS 6.4.2 Administration Guide 171
Fortinet Inc.
Fortinet Security Fabric
Compromised host information can also be viewed on the FortiAnalyzer in SOC > FortiView > Threats > Compromised
Hosts.
The FortiAnalyzer must have a FortiGuard Indicators of Compromise service license in order
to see compromised hosts.
Click Drill Down to Endpoint Vulnerability to open the vulnerabilities page that shows a summary of the vulnerabilities on
the selected endpoint.
FortiAnalyzer
The Security Fabric topology can also be seen on the FortiAnalyzer device. In the Device Manager, FortiGate devices
are shown as part of a Security Fabric group with an asterisk next to the name of the root FortiGate.
To view the Security Fabric topology, right-click on the fabric group and select Fabric Topology. Only Fortinet devices
are shown in the Security Fabric topology views.
FortiOS 6.4.2 Administration Guide 172
Fortinet Inc.
Fortinet Security Fabric
Topology view — consolidated risk
The topology view shows endpoints based on their highest severity event.
In the default topology view, you can view hosts with critical vulnerabilities and compromised hosts identified as critical
risks.
The consolidated Risk view mode displays different risks within the Security Fabric topology. You can use the Risk view
mode to filter threats by Compromised Hosts, Vulnerability, and Threat Score.
To access the default topology view:
1. Go to Security Fabric > Physical Topology.
The default topology view highlights hosts with critical vulnerabilities and compromised hosts as critical risks (three
critical risks in the example).
a. Hover over the tooltips for more details.
2. To view the critical risk summary, click Critical Risks.
The Critical Risks pane displays on the right-side of the screen.
FortiOS 6.4.2 Administration Guide 173
Fortinet Inc.
Fortinet Security Fabric
To access the consolidated Risk view mode:
1. In the view option dropdown button, select Risk.
2. Select one of the following options from the Risk Type dropdown menu:
l All
FortiOS 6.4.2 Administration Guide 174
Fortinet Inc.
Fortinet Security Fabric
l Compromised Hosts
l Vulnerability
l Threat Score
FortiOS 6.4.2 Administration Guide 175
Fortinet Inc.
Fortinet Security Fabric
Viewing and controlling network risks via topology view
This topic shows how to view and control compromised hosts via the Security Fabric > Physical Topology or Security
Fabric > Logical Topology view.
In the following topology, the downstream FortiGate (Marketing) is connected to the root FortiGate (Edge) through a
FortiSwitch (Distribution). The Endpoint Host is connected to the downstream FortiGate (Marketing) through another
FortiSwitch (Access).
This topic consists of the following steps:
1. View the compromised endpoint host.
2. Quarantine the compromised endpoint host.
3. Run diagnose commands.
To view the compromised endpoint host:
1. Test that FortiGate detects a compromised endpoint host by opening a browser on the endpoint host and entering a
malicious website URL. The browser displays a Web Page Blocked! warning and does not allow access to the
website.
2. In FortiOS on the root FortiGate, go to Security Fabric > Physical Topology. The endpoint host, connected to the
Access FortiSwitch, is highlighted in red. Mouse over the endpoint host to view a tooltip that shows the IoC verdict.
The endpoint host is compromised.
3. Go to Security Fabric > Logical Topology. The endpoint host, connected to the downstream FortiGate, is highlighted
in red. Mouse over the endpoint host to view a tooltip that shows the IoC verdict. The endpoint host is compromised.
To quarantine the compromised endpoint host:
1. In FortiOS on the root FortiGate, go to Security Fabric > Physical Topology.
2. Right-click the endpoint host and select Quarantine Host. Click OK to confirm the confirmation dialog.
FortiOS 6.4.2 Administration Guide 176
Fortinet Inc.
Fortinet Security Fabric
3. Go to Monitor > Quarantine Monitor. From the dropdown list at the top right corner, select All FortiGates. The
quarantined endpoint host displays in the content pane.
4. On the endpoint host, open a browser and visit a website such as https://www.fortinet.com/. If the website cannot be
accessed, this confirms that the endpoint host is quarantined.
To run diagnose commands:
1. To show the downstream FortiGate after it joins the Security Fabric, run the diagnose sys csf downstream
command in the root FortiGate (Edge) CLI. The output should resemble the following:
Edge # diagnose sys csf downstream
1: FG101ETK18002187 (192.168.7.3) Management-IP: 0.0.0.0 Management-port:0 parent:
FG201ETK18902514
path:FG201ETK18902514:FG101ETK18002187
data received: Y downstream intf:wan1 upstream intf:vlan70 admin-port:443
authorizer:FG201ETK18902514
2. To show the upstream FortiGate after the downstream FortiGate joins the Security Fabric, run the diagnose sys
csf upstream command in the downstream FortiGate (Marketing) CLI. The output should resemble the following:
Marketing # diagnose sys csf upstream
Upstream Information:
Serial Number:FG201ETK18902514
IP:192.168.7.2
Connecting interface:wan1
Connection status:Authorized
3. To show the quarantined endpoint host in the connected FortiGate, run the following commands in the downstream
FortiGate (Marketing) CLI:
Marketing # show user quarantine
config user quarantine
config targets
edit "PC2"
set description "Manually quarantined"
config macs
edit 00:0c:29:3d:89:39
set description "manual-qtn Hostname: PC2"
next
end
next
end
end
Deploying the Security Fabric
This topic provides an example of deploying Security Fabric with three downstream FortiGates connecting to one root
FortiGate. To deploy Security Fabric, you need a FortiAnalyzer running firmware version 6.2 or later.
FortiOS 6.4.2 Administration Guide 177
Fortinet Inc.
Fortinet Security Fabric
The following shows a sample network topology with three downstream FortiGates (Accounting, Marketing, and Sales)
connected to the root FortiGate (Edge).
To configure the root FortiGate (Edge):
1. Configure interfaces:
a. In the root FortiGate (Edge), go to Network > Interfaces.
b. Edit port16:
l Set Role to DMZ.
l For the interface connected to FortiAnalyzer, set the IP/Network Mask to 192.168.65.2/255.255.255.0
FortiOS 6.4.2 Administration Guide 178
Fortinet Inc.
Fortinet Security Fabric
c. Edit port10:
l Set Role to LAN.
l For the interface connected to the downstream FortiGate (Accounting), set the IP/Network Mask to
192.168.10.2/255.255.255.0
d. Edit port11:
l Set Role to LAN.
l For the interface connected to the downstream FortiGate (Marketing), set the IP/Network Mask to
192.168.200.2/255.255.255.0
2. Configure Security Fabric:
a. In the root FortiGate (Edge), go to Security Fabric > Fabric Connectors and double-click the Security Fabric
Setup card.
b. For Status, click Enable.
c. Set the Security Fabric role to Serve as Fabric Root. The FortiAnalyzer settings can be configured.
d. Enter the FortiAnalyzer IP (192.168.65.10) and select and Upload option (the default is Real Time).
e. Click Test Connectivity.
A warning message indicates that the FortiGate is not authorized on the FortiAnalyzer. The authorization is
configured in a later step on the FortiAnalyzer.
f. Click OK. The FortiAnalyzer serial number is verified.
g. Enter a Fabric name, such as Office-Security-Fabric.
h. Ensure Allow other Security Fabric devices to join is enabled and add port10 and port11.
i. Click OK.
3. Create a policy to allow the downstream FortiGate (Accounting) to access the FortiAnalyzer:
a. In the root FortiGate (Edge), go to Policy & Objects > Addresses.
b. Click Create New.
l Set Name to FAZ-addr.
l Set Type to Subnet.
l Set Subnet/IP Range to 192.168.65.10/32.
l Set Interface to any.
c. Click OK.
d. Click Create New.
l Set Name to Accounting.
l Set Type to Subnet.
l Set Subnet/IP Range to 192.168.10.10/32.
l Set Interface to any.
e. Click OK.
f. In the root FortiGate (Edge), go to Policy & Objects > Firewall Policy and click Create New.
l Set Name to Accounting-to-FAZ.
l Set srcintf to port10.
l Set dstintf to port16.
l Set srcaddr to Accounting-addr.
l Set dstaddr to FAZ-addr.
l Set Action to Accept.
l Set Schedule to Always.
l Set Service to All.
l Enable NAT.
l Set IP Pool Configuration to Use Outgoing Interface Address.
FortiOS 6.4.2 Administration Guide 179
Fortinet Inc.
Fortinet Security Fabric
g. Click OK.
4. Create a policy to allow the two downstream FortiGates (Marketing and Sales) to access the FortiAnalyzer:
a. In the root FortiGate (Edge), go to Policy & Objects > Addresses and click Create New.
l Set Name to Marketing-addr.
l Set Type to Subnet.
l Set Subnet/IP Range to 192.168.200.10/32.
l Set Interface to any.
b. Click OK.
c. In the root FortiGate (Edge), go to Policy & Objects > Firewall Policy and click Create New.
l Set Name to Marketing-to-FAZ.
l Set srcintf to port11.
l Set dstintf to port16.
l Set srcaddr to Marketing-addr.
l Set dstaddr to FAZ-addr.
l Set Action to Accept.
l Set Schedule to Always.
l Set Service to All.
l Enable NAT.
l Set IP Pool Configuration to Use Outgoing Interface Address.
d. Click OK.
To configure the downstream FortiGate (Accounting):
1. Configure interface:
a. In the downstream FortiGate (Accounting), go to Network > Interfaces.
b. Edit interface wan1:
l Set Role to WAN.
l For the interface connected to root, set the IP/Network Mask to 192.168.10.10/255.255.255.0
2. Configure the default static route to connect to the root FortiGate (Edge):
a. In the downstream FortiGate (Accounting), go to Network > Static Routes and click Create New or Create New
> IPv4 Static Route.
l Set Destination to 0.0.0.0/0.0.0.0.
l Set Interface to wan1.
l Set Gateway Address to 192.168.10.2.
b. Click OK.
3. Configure Security Fabric:
a. In the downstream FortiGate (Accounting), go to Security Fabric > Fabric Connectors and double-click the
Security Fabric Setup card.
b. For Status, click Enable.
FortiAnalyzer automatically enables logging. Settings for the FortiAnalyzer are retrieved from the root FortiGate
(Edge) when FortiGate (Accounting) connects to the root FortiGate (Edge).
c. Set the Security Fabric role to Join Existing Fabric.
d. Upstream FortiGate IP is filled in automatically with the default static route Gateway Address of 192.168.10.2
set in the previous step.
e. Disable Allow other FortiGates to join, because there is no downstream FortiGate connecting to it.
f. Click OK.
FortiOS 6.4.2 Administration Guide 180
Fortinet Inc.
Fortinet Security Fabric
To configure the downstream FortiGate (Marketing):
1. Configure interface:
a. In the downstream FortiGate (Marketing), go to Network > Interfaces.
b. Edit port12:
l Set Role to LAN.
l For the interface connected to the downstream FortiGate (Sales), set the IP/Network Mask to
192.168.135.11/255.255.255.0.
c. Edit wan1:
l Set Role to WAN.
l For the interface connected to the root FortiGate (Edge), set the IP/Network Mask to
192.168.200.10/255.255.255.0.
2. Configure the default static route to connect to the root FortiGate (Edge):
a. In the downstream FortiGate (Marketing), go to Network > Static Routes and click Create New or Create New >
IPv4 Static Route.
l Set Destination to 0.0.0.0/0.0.0.0.
l Set Interface to wan1.
l Set Gateway Address to 192.168.200.2.
b. Click OK.
3. Configure Security Fabric:
a. In the downstream FortiGate (Marketing), go to Security Fabric > Fabric Connectors and double-click the
Security Fabric Setup card.
b. For Status, click Enable.
FortiAnalyzer automatically enables logging. Settings for the FortiAnalyzer are retrieved from the root FortiGate
(Edge) when FortiGate (Marketing) connects to the root FortiGate (Edge).
c. Set the Security Fabric role to Join Existing Fabric.
d. Upstream FortiGate IP is filled in automatically with the default static route Gateway Address of 192.168.200.2
set in the previous step.
e. Enable Allow other FortiGates to join and add port12.
f. Click OK.
4. Create a policy to allow another downstream FortiGate (Sales) going through FortiGate (Marketing) to access the
FortiAnalyzer:
a. In the downstream FortiGate (Marketing), go to Policy & Objects > Addresses and click Create New.
l Set Name to FAZ-addr.
l Set Type to Subnet.
l Set Subnet/IP Range to 192.168.65.10/32.
l Set Interface to any.
b. Click OK.
c. Click Create New.
l Set Name to Sales-addr.
l Set Type to Subnet.
l Set Subnet/IP Range to 192.168.135.10/32.
l Set Interface to any.
d. Click OK.
FortiOS 6.4.2 Administration Guide 181
Fortinet Inc.
Fortinet Security Fabric
e. In the downstream FortiGate (Marketing), go to Policy & Objects > Firewall Policy and click Create New.
l Set Name to Sales-to-FAZ.
l Set srcintf to port12.
l Set dstintf to wan1.
l Set srcaddr to Sales-addr.
l Set dstaddr to FAZ-addr.
l Set Action to Accept.
l Set Schedule to Always.
l Set Service to All.
l Enable NAT.
l Set IP Pool Configuration to Use Outgoing Interface Address.
f. Click OK.
To configure the downstream FortiGate (Accounting):
1. Configure interface:
a. In the downstream FortiGate (Accounting), go to Network > Interfaces.
b. Edit interface wan1:
l Set Role to WAN.
l For the interface connected to root, set the IP/Network Mask to 192.168.10.10/255.255.255.0
2. Configure the default static route to connect to the root FortiGate (Edge):
a. In the downstream FortiGate (Accounting), go to Network > Static Routes and click Create New or Create New
> IPv4 Static Route.
l Set Destination to 0.0.0.0/0.0.0.0.
l Set Interface to wan1.
l Set Gateway Address to 192.168.10.2.
b. Click OK.
3. Configure Security Fabric:
a. In the downstream FortiGate (Accounting), go to Security Fabric > Fabric Connectors and double-click the
Security Fabric Setup card.
b. For Status, click Enable.
FortiAnalyzer automatically enables logging. Settings for the FortiAnalyzer are retrieved from the root FortiGate
(Edge) when FortiGate (Accounting) connects to the root FortiGate (Edge).
c. Set the Security Fabric role to Join Existing Fabric.
d. Upstream FortiGate IP is filled in automatically with the default static route Gateway Address of 192.168.10.2
set in the previous step.
e. Disable Allow other FortiGates to join, because there is no downstream FortiGate connecting to it.
f. Click OK.
To configure the downstream FortiGate (Sales):
1. Configure interface:
a. In the downstream FortiGate (Sales), go to Network > Interfaces.
b. Edit wan2:
l Set Role to WAN.
l For the interface connected to the upstream FortiGate (Marketing), set the IP/Network Mask to
192.168.135.10/255.255.255.0.
FortiOS 6.4.2 Administration Guide 182
Fortinet Inc.
Fortinet Security Fabric
2. Configure the default static route to connect to the upstream FortiGate (Marketing):
a. In the downstream FortiGate (Sales), go to Network > Static Routes and click Create New or Create New >
IPv4 Static Route.
l Set Destination to 0.0.0.0/0.0.0.0.
l Set Interface to wan2.
l Set Gateway Address to 192.168.135.11.
b. Click OK.
3. Configure Security Fabric:
a. In the downstream FortiGate (Sales), go to Security Fabric > Fabric Connectors and double-click the Security
Fabric Setup card.
b. For Status, click Enable.
FortiAnalyzer automatically enables logging. Settings for the FortiAnalyzer are retrieved from the root FortiGate
(Edge) when FortiGate (Sales) connects to the root FortiGate (Edge).
c. Set the Security Fabric role to Join Existing Fabric.
d. Upstream FortiGate IP is filled in automatically with the default static route Gateway Address of
192.168.135.11 set in the previous step.
e. Disable Allow other FortiGates to join, because there is no downstream FortiGate connecting to it.
f. Click OK.
To authorize downstream FortiGates (Accounting, Marketing, and Sales) on the root FortiGate (Edge):
1. In the root FortiGate (Edge), go to Security Fabric > Fabric Connectors and double-click the Security Fabric Setup
card.
The Topology tree highlights two connected FortiGates with their serial numbers and asks you to authorize the
highlighted devices.
2. Select the highlighted FortiGates and select Authorize.
After they are authorized, the two downstream FortiGates (Accounting and Marketing) appear in the Topology tree
in the Security Fabric > Fabric Connectors > Security Fabric Setup page. This means that the two downstream
FortiGates (Accounting and Marketing) have successfully joined the Security Fabric.
3. The Topology tree now highlights the FortiGate with the serial number that is connected to the downstream
FortiGate (Marketing) and asks you to authorize the highlighted device.
4. Select the highlighted FortiGates and select Authorize.
After it is authorized, the downstream FortiGate ( Sales) appears in the Topology tree in the Security Fabric > Fabric
Connectors > Security Fabric Setup page. This means that the downstream FortiGates (Sales) has successfully
joined the Security Fabric.
To use FortiAnalyzer to authorize all the Security Fabric FortiGates:
1. Authorize all the Security Fabric FortiGates on the FortiAnalyzer side:
a. On the FortiAnalyzer, go to System Settings > Network > All Interfaces.
b. Edit port1 and set IP Address/Netmask to 192.168.65.10/255.255.255.0.
c. Go to Device Manager > Unauthorized. All of the FortiGates are listed as unauthorized.
i. Select all the FortiGates and select Authorize. The FortiGates are now listed as authorized.
After a moment, a warning icon appears beside the root FortiGate (Edge) because the FortiAnalyzer
needs administrative access to the root FortiGate (Edge) in the Security Fabric.
ii. Click the warning icon and enter the admin username and password of the root FortiGate (Edge).
FortiOS 6.4.2 Administration Guide 183
Fortinet Inc.
Fortinet Security Fabric
2. Check FortiAnalyzer status on all the Security Fabric FortiGates:
a. On each FortiGate, go to Security Fabric > Fabric Connectors and double-click the FortiAnalyzer Logging card.
b. Check that Storage usage information is shown.
To check Security Fabric deployment result:
1. On FortiGate (Edge), go to Dashboard > Status.
The Security Fabric widget displays all the FortiGates in the Security Fabric.
2. On FortiGate (Edge), go to Security Fabric > Physical Topology.
This page shows a visualization of access layer devices in the Security Fabric.
3. On FortiGate (Edge), go to Security Fabric > Physical Topology.
This dashboard shows information about the interfaces of each device in the Security Fabric.
FortiOS 6.4.2 Administration Guide 184
Fortinet Inc.
Fortinet Security Fabric
To run diagnose commands:
1. Run the diagnose sys csf authorization pending-list command in the root FortiGate to show the
downstream FortiGate pending for root FortiGate authorization:
Edge # diagnose sys csf authorization pending-list
Serial IP Address HA-Members Path
------------------------------------------------------------------------------------
FG201ETK18902514 0.0.0.0 FG3H1E5818900718:FG201ETK18902514
2. Run the diagnose sys csf downstream command in the root or middle FortiGate to show the downstream
FortiGates after they join Security Fabric:
Edge # diagnose sys csf downstream
1: FG201ETK18902514 (192.168.200.10) Management-IP: 0.0.0.0 Management-port:0
parent: FG3H1E5818900718
path:FG3H1E5818900718:FG201ETK18902514
data received: Y downstream intf:wan1 upstream intf:port11 admin-port:443
authorizer:FG3H1E5818900718
2: FGT81ETK18002246 (192.168.10.10) Management-IP: 0.0.0.0 Management-port:0 parent:
FG3H1E5818900718
path:FG3H1E5818900718:FGT81ETK18002246
data received: Y downstream intf:wan1 upstream intf:port10 admin-port:443
authorizer:FG3H1E5818900718
3: FG101ETK18002187 (192.168.135.10) Management-IP: 0.0.0.0 Management-port:0
parent: FG201ETK18902514
path:FG3H1E5818900718:FG201ETK18902514:FG101ETK18002187
data received: Y downstream intf:wan2 upstream intf:port12 admin-port:443
authorizer:FG3H1E5818900718
3. Run the diagnose sys csf upstream command in any downstream FortiGate to show the upstream FortiGate
after downstream FortiGate joins Security Fabric:
Marketing # diagnose sys csf upstream
Upstream Information:
Serial Number:FG3H1E5818900718
IP:192.168.200.2
Connecting interface:wan1
Connection status:Authorized
Synchronizing objects across the Security Fabric
When the Security Fabric is enabled, various objects such as addresses, services, and schedules are synced from the
upstream FortiGate to all downstream devices by default. The firewall object synchronization wizard helps identify
objects that are out of sync and resolves any conflicts. Objects that are out of sync are highlighted in yellow in the GUI.
In this example, the notifications icon displays a message that Firewall objects are not synchronized with all the
FortiGates in the Fabric. In the topology tree, Branch_Office_02 is highlighted in yellow because it is out of sync.
FortiOS 6.4.2 Administration Guide 185
Fortinet Inc.
Fortinet Security Fabric
In this example, the tooltip displays a caution icon that the device is out of sync.
To use the firewall object synchronization wizard in the GUI:
1. Go to Security Fabric >Fabric Connectors and click Open Synchronization Wizard.
A list of FortiGates and their synchronization status displays.
2. Select a FortiGate that is Out of sync and click Next.
A list of tables and their synchronization status displays.
FortiOS 6.4.2 Administration Guide 186
Fortinet Inc.
Fortinet Security Fabric
3. Click Synchronize Tables.
The FortiGate attempts to automatically resolve the conflicts. In this example, the address table requires manual
intervention.
4. Click Resolve Conflicts.
5. For Strategy, choose one of the following.
a. Automatic resolve (automatically resolves all the name conflicts and renames them on the selected FortiGate
using the FortiGate name as a suffix):
i. Click Automatic.
ii. Click Rename All Objects.
b. Manual resolve:
i. Click Manual.
ii. Double-click an object and re-name it.
FortiOS 6.4.2 Administration Guide 187
Fortinet Inc.
Fortinet Security Fabric
iii. Click OK.
6. Click Next.
An updated list of FortiGates and their synchronization status displays.
7. Click Close.
To verify object synchronization on downstream devices:
1. Log in to a downstream device.
2. Go to Policy & Objects > Addresses.
l An information bubble displays the following: All objects must be created/edited on the root FortiGate, and will
be read-only on downstream FortiGates.
l The following example shows an object that exists on both upstream (Enterprise_Second_Floor) and
downstream (fshuva-test) FortiGates. On the downstream device, there is an existing gmail.com, and another
object, gmail.com_fshuva-test, that was resolved by adding the suffix of the upstream FortiGate name to the
end.
FortiOS 6.4.2 Administration Guide 188
Fortinet Inc.
Fortinet Security Fabric
l In this example, an object created on the upstream FortiGate is synchronized to a downstream FortiGate.
The same object appears automatically on the downstream device.
CLI commands
Object synchronization can be configured with the following commands:
config system csf
set fabric-object-unification [default | local]
set configuration-sync [default | local]
...
next
end
Parameter Description
fabric-object-unification default: Global CMDB objects will be synchronized in Security Fabric.
local: Global CMDB objects will not be synchronized to and from this device.
configuration-sync default: Synchronize configuration for FortiAnalyzer, FortiSandbox, and Central
Management to root node.
local: Do not synchronize configuration with root node.
Security Fabric over IPsec VPN
This is an example of configuring Security Fabric over IPsec VPN.
FortiOS 6.4.2 Administration Guide 189
Fortinet Inc.
Fortinet Security Fabric
Sample topology
This sample topology shows a downstream FortiGate (HQ2) connected to the root FortiGate (HQ1) over IPsec VPN to
join Security Fabric.
Sample configuration
To configure the root FortiGate (HQ1):
1. Configure interface:
a. In the root FortiGate (HQ1), go to Network > Interfaces.
b. Edit port2:
l Set Role to WAN.
l For the interface connected to the Internet, set the IP/Network Mask to 10.2.200.1/255.255.255.0
c. Edit port6:
l Set Role to DMZ.
l For the interface connected to FortiAnalyzer, set the IP/Network Mask to 192.168.8.250/255.255.255.0
2. Configure the static route to connect to the Internet:
a. Go to Network > Static Routes and click Create New or Create New > IPv4 Static Route.
l Set Destination to 0.0.0.0/0.0.0.0.
l Set Interface to port2.
l Set Gateway Address to 10.2.200.2.
b. Click OK.
3. Configure IPsec VPN:
a. Go to VPN > IPsec Wizard.
l Set Name to To-HQ2.
l Set Template Type to Custom.
l Click Next.
l Set Authentication to Method.
l Set Pre-shared Key to 123456.
b. Leave all other fields in their default values and click OK.
4. Configure the IPsec VPN interface IP address which will be used to form Security Fabric:
a. Go to Network > Interfaces.
b. Edit To-HQ2:
l Set Role to LAN.
l Set the IP/Network Mask to 10.10.10.1/255.255.255.255.
l Set Remote IP/Network Mask to 10.10.10.3/255.255.255.0.
FortiOS 6.4.2 Administration Guide 190
Fortinet Inc.
Fortinet Security Fabric
5. Configure IPsec VPN local and remote subnet:
a. Go to Policy & Objects > Addresses.
b. Click Create New
l Set Name to To-HQ2_remote_subnet_2.
l Set Type to Subnet.
l Set IP/Network Mask to 10.10.10.3/32.
c. Click OK.
d. Click Create New
l Set Name to To-HQ2_local_subnet_1.
l Set Type to Subnet.
l Set IP/Network Mask to 192.168.8.0/24.
e. Click OK.
f. Click Create New
l Set Name to To-HQ2_remote_subnet_1.
l Set Type to Subnet.
l Set IP/Network Mask to 10.1.100.0/24.
g. Click OK.
6. Configure IPsec VPN static routes:
a. Go to Network > Static Routes
b. Click Create New or Create New > IPv4 Static Route.
l For Named Address, select Type and select To-HQ2_remote_subnet_1.
l Set Interface to To-HQ2.
Click OK.
c. Click Create New or Create New > IPv4 Static Route.
For Named Address, select Type and select To-HQ2_remote_subnet_1.
l
l Set Interface to Blackhole.
l Set Administrative Distance to 254.
d. Click OK.
7. Configure IPsec VPN policies:
a. Go to Policy & Objects > Firewall Policy
b. Click Create New.
l Set Name to vpn_To-HQ2_local.
l Set Incoming Interface to port6.
l Set Outgoing Interface to To-HQ2.
l Set Source to To-HQ2_local_subnet_1.
l Set Destination to To-HQ2_remote_subnet_1.
l Set Schedule to Always.
l Set Service to All.
l Disable NAT.
c. Click OK.
d. Click Create New.
l Set Name to vpn_To-HQ2_remote.
l Set Incoming Interface to To-HQ2.
l Set Outgoing Interface to port6.
l Set Source to To-HQ2_remote_subnet_1, To-HQ2_remote_subnet_2.
FortiOS 6.4.2 Administration Guide 191
Fortinet Inc.
Fortinet Security Fabric
Set Destination to To-HQ2_local_subnet_1.
l
Set Schedule to Always.
l
l Set Service to All.
l Enable NAT.
l Set IP Pool Configuration to Use Outgoing Interface Address.
e. Click OK.
8. Configure Security Fabric:
a. Go to Security Fabric > Fabric Connectors and double-click the Security Fabric Setup card.
b. For Status, click Enable.
After FortiGate Telemetry is enabled, FortiAnalyzer automatically enables Logging and Upload is set to Real
Time.
c. Set the Security Fabric role to Serve as Fabric Root. The FortiAnalyzer settings can be configured.
d. Enter the FortiAnalyzer IP (192.168.8.250).
e. Click OK. The FortiAnalyzer serial number is verified.
f. Enter a Fabric name, such as Office-Security-Fabric.
g. Ensure Allow other Security Fabric devices to join is enabled and add VPN interface To-HQ2.
h. Click OK.
To configure the downstream FortiGate (HQ2):
1. Configure interface:
a. Go to Network > Interfaces.
b. Edit interface wan1:
l Set Role to WAN.
l For the interface connected to the Internet, set the IP/Network Mask to 192.168.7.3/255.255.255.0.
c. Edit interface vlan20:
l Set Role to LAN.
l For the interface connected to local endpoint clients, set the IP/Network Mask to
10.1.100.3/255.255.255.0.
2. Configure the static route to connect to the Internet:
a. Go to Network > Static Routes and click Create New or Create New > IPv4 Static Route.
l Set Destination to 0.0.0.0/0.0.0.0.
l Set Interface to wan1.
l Set Gateway Address to 192.168.7.2.
b. Click OK.
3. Configure IPsec VPN:
a. Go to VPN > IPsec Wizard.
l Set VPN Name to To-HQ1.
l Set Template Type to Custom.
l Click Next.
l In the Network IP Address, enter 10.2.200.1.
l Set Interface to wan1.
l Set Authentication to Method.
l Set Pre-shared Key to 123456.
b. Leave all other fields in their default values and click OK.
FortiOS 6.4.2 Administration Guide 192
Fortinet Inc.
Fortinet Security Fabric
4. Configure the IPsec VPN interface IP address which will be used to form Security Fabric:
a. Go to Network > Interfaces.
b. Edit To-HQ1:
l Set Role to WAN.
l Set the IP/Network Mask to 10.10.10.3/255.255.255.255.
l Set Remote IP/Network Mask to 10.10.10.1/255.255.255.0.0.
5. Configure IPsec VPN local and remote subnet:
a. Go to Policy & Objects > Addresses.
b. Click Create New
l Set Name to To-HQ1_local_subnet_1.
l Set Type to Subnet.
l Set IP/Network Mask to 10.1.100.0/24.
c. Click OK.
d. Click Create New
l Set Name to To-HQ1_remote_subnet_1.
l Set Type to Subnet.
l Set IP/Network Mask to 192.168.8.0/24.
e. Click OK.
6. Configure IPsec VPN static routes:
a. Go to Network > Static Routes and click Create New or Create New > IPv4 Static Route.
l For Named Address, select Type and select To-HQ1_remote_subnet_1.
l Set Interface to To-HQ1.
b. Click OK.
c. Click Create New or Create New > IPv4 Static Route.
l For Named Address, select Type and select To-HQ1_remote_subnet_1.
l Set Interface to Blackhole.
l Set Administrative Distance to 254.
d. Click OK.
7. Configure IPsec VPN policies:
a. Go to Policy & Objects > Firewall Policy and click Create New.
l Set Name to vpn_To-HQ1_local.
l Set Incoming Interface to vlan20.
l Set Outgoing Interface to To-HQ1.
l Set Source to To-HQ1_local_subnet_1.
l Set Destination to To-HQ1_remote_subnet_1.
l Set Schedule to Always.
l Set Service to All.
l Disable NAT.
b. Click OK.
c. Click Create New.
l Set Name to vpn_To-HQ1_remote.
l Set Incoming Interface to To-HQ1.
l Set Outgoing Interface to vlan20.
l Set Source to To-HQ1_remote_subnet_1.
l Set Destination to -HQ1_local_subnet_1.
FortiOS 6.4.2 Administration Guide 193
Fortinet Inc.
Fortinet Security Fabric
Set Schedule to Always.
l
Set Service to All.
l
l Disable NAT.
d. Click OK.
8. Configure Security Fabric:
a. Go to Security Fabric > Fabric Connectors and double-click the Security Fabric Setup card.
b. For Status, click Enable.
FortiAnalyzer automatically enables logging. FortiAnalyzer settings will be retrieved when the downstream
FortiGate connects to the root FortiGate.
c. Set the Security Fabric role to Join Existing Fabric.
d. Set the Upstream FortiGate IP to 10.10.10.1.
e. Click OK.
To authorize the downstream FortiGate (HQ2) on the root FortiGate (HQ1):
1. In the root FortiGate (HQ1), go to Security Fabric > Fabric Connectors and double-click the Security Fabric Setup
card.
The Topology tree highlights the connected FortiGate (HQ2) with the serial number and asks you to authorize the
highlighted device.
2. Select the highlighted FortiGates and select Authorize.
After authorization, the downstream FortiGate (HQ2) appears in the Topology tree in the Security Fabric > Fabric
Connectors > Security Fabric Setup page. This means the downstream FortiGate (HQ2) has successfully joined the
Security Fabric.
To check Security Fabric over IPsec VPN:
1. On the root FortiGate (HQ1), go to Security Fabric > Physical Topology.
The root FortiGate (HQ1) is connected by the downstream FortiGate (HQ2) with VPN icon in the middle.
2. On the root FortiGate (HQ1), go to Security Fabric > Logical Topology.
The root FortiGate (HQ1) VPN interface To-HQ2 is connected by downstream FortiGate (HQ2) VPN interface To-
HQ1 with VPN icon in the middle.
To run diagnose commands:
1. Run the diagnose sys csf authorization pending-list command in the root FortiGate (HQ1) to show
the downstream FortiGate pending for root FortiGate authorization:
FortiOS 6.4.2 Administration Guide 194
Fortinet Inc.
Fortinet Security Fabric
HQ1 # diagnose sys csf authorization pending-list
Serial IP Address HA-Members
Path
------------------------------------------------------------------------------------
FG101ETK18002187 0.0.0.0
FG3H1E5818900718:FG101ETK18002187
2. Run the diagnose sys csf downstream command in the root FortiGate (HQ1) to show the downstream
FortiGate (HQ2) after it joins Security Fabric:
HQ1 # diagnose sys csf downstream
1: FG101ETK18002187 (10.10.10.3) Management-IP: 0.0.0.0 Management-port:0 parent:
FG3H1E5818900718
path:FG3H1E5818900718:FG101ETK18002187
data received: Y downstream intf:To-HQ1 upstream intf:To-HQ2 admin-port:443
authorizer:FG3H1E5818900718
3. Run the diagnose sys csf upstream command in the downstream FortiGate (HQ2) to show the root
FortiGate (HQ1) after the downstream FortiGate joins Security Fabric:
HQ2 # diagnose sys csf upstream
Upstream Information:
Serial Number:FG3H1E5818900718
IP:10.10.10.1
Connecting interface:To-HQ1
Connection status:Authorized
Leveraging LLDP to simplify security fabric negotiation
This feature enables LLDP reception on WAN interfaces, and prompts FortiGates that are joining the Security Fabric if
the upstream FortiGate asks.
l If an interface's role is undefined, LLDP reception and transmission inherit settings from the VDOM.
l If an interface's role is WAN, LLDP reception is enabled.
l If an interface's role is LAN, LLDP transmission is enabled.
When a FortiGate B's WAN interface detects that FortiGate A's LAN interface is immediately upstream (through the
default gateway), and FortiGate A has Security Fabric enabled, FortiGate B will show a notification on the GUI asking to
join the Security Fabric.
To configure LLDP reception and join a Security Fabric:
1. Go To Network > Interfaces.
2. Configure an interface:
l If the interface's role is undefined, under Administrative Access, set Receive LLDP and Transmit LLDP to Use
VDOM Setting.
FortiOS 6.4.2 Administration Guide 195
Fortinet Inc.
Fortinet Security Fabric
Using the CLI:
config system interface
edit "port3"
set lldp-reception vdom
set lldp-transmission vdom
set role undefined
...
next
end
l If the interface's role is WAN, under Administrative Access, set Receive LLDP to Enable and Transmit LLDP to
Use VDOM Setting.
Using the CLI:
config system interface
edit "wan1"
set lldp-reception enable
set lldp-transmission vdom
set role wan
...
next
end
FortiOS 6.4.2 Administration Guide 196
Fortinet Inc.
Fortinet Security Fabric
l If the interface's role is LAN, under Administrative Access, set Receive LLDP to Use VDOM Setting and
Transmit LLDP to Enable.
Using the CLI:
config system interface
edit "port2"
set lldp-reception vdom
set lldp-transmission enable
set role lan
...
next
end
A notification will be shown on FortiGate B.
3. Click the notification. The Core Network Security page with the Security Fabric settings opens. All the required
settings automatically configured.
4. Click OK to apply the settings, or use the following CLI commands:
config system csf
set status enable
set upstream-ip 10.2.200.1
end
FortiOS 6.4.2 Administration Guide 197
Fortinet Inc.
Fortinet Security Fabric
Configuring the Security Fabric with SAML
Security Assertion Markup Language (SAML) is an open standard for exchanging authentication and authorization data
between one Identity Provider (IdP) and one or more Service Providers (SP). Both parties exchange messages using the
XML protocol as transport. FortiGate firewall devices can be configured as IdPs or SPs.
When the Security Fabric is enabled, you can configure the root FortiGate as the IdP. You can also configure
downstream FortiGates to be automatically configured as SPs, with all links required for SAML communication, when
added to the Security Fabric. Administrators must still be authorized on each device. Credentials are verified by the root
FortiGate, and login credentials are shared between devices. Once authorized, an administrator can move between
fabric devices without logging in again.
Optionally, the downstream FortiGate can also be manually configured as an SP, and then linked to the root FortiGate.
The authentication service is provided by the root FortiGate using local system admin accounts for authentication. Any of
the administrator account types can be used for SAML log in. After successful authentication, the administrator logs in to
the first downstream FortiGate SP, and can then connect to other downstream FortiGates that have the SSO account
properly configured, without needing to provide credentials again, as long as admins use the same browser session. In
summary, the root FortiGate IdP performs SAML SSO authentication, and individual device administrators define
authorization on FortiGate SPs by using security profiles.
Configuring single-sign-on in the Security Fabric
SAML SSO enables a single FortiGate device to act as the identify provider (IdP), while other FortiGate devices act as
service providers (SP) and redirect logins to the IdP.
Only the root FortiGate can be the identity provider (IdP). The downstream FortiGates can be
configured as service providers (SP).
The process is as follows:
1. Configuring the root FortiGate as the IdP on page 198
2. Configuring a downstream FortiGate as an SP on page 199
3. Configuring certificates for SAML SSO on page 201
4. Verifying the single-sign-on configuration on page 202
You can also use the CLI. See CLI commands for SAML SSO on page 203.
Configuring the root FortiGate as the IdP
To configure the root FortiGate as the IdP:
1. Log in to the root FortiGate.
2. Go to Security Fabric > Fabric Connectors and double-click the Security Fabric Setup card.
3. Enable SAML Single Sign-On. The Mode field is automatically populated as Identity Provider (IdP).
4. Enter an IP address in the Management IP/FQDN box.
FortiOS 6.4.2 Administration Guide 198
Fortinet Inc.
Fortinet Security Fabric
5. Enter a management port in the Management port box.
The Management IP/FQDN will be used by the SPs to redirect the login request. The Management IP/FQDN and
Management port must be reachable from the user's device.
6. Select the IdP certificate.
7. Click OK.
Configuring a downstream FortiGate as an SP
There are two ways to configure the downstream FortiGate:
l From the root FortiGate
l From within the downstream device
An SP must be a member of the Security Fabric before you configure it.
To configure the downstream FortiGate from the root FortiGate:
1. Log in to the root FortiGate.
2. Go to Security Fabric > Fabric Connectors and double-click the Security Fabric Setup card.
FortiOS 6.4.2 Administration Guide 199
Fortinet Inc.
Fortinet Security Fabric
3. In the Topology tree, hover over a FortiGate and click Configure.
The Configure pane opens.
4. Enable SAML Single Sign-On. The Mode field is automatically populated as Service Provider (SP).
5. Enter an IP address in the Management IP/FQDN box.
6. Enter a management port in the Management port box.
The Management IP/FQDN will be used by the IdP and so other SPs can redirect to each other. The Management
port must be reachable from the user's device.
7. Select a Default login page option.
8. Select one of the following Default admin profile types: prof_admin, super_admin, or super_admin_readonly. The
no_access_admin profile is set as the default.
9. Click OK.
To configure the downstream FortiGate within the device:
1. Log in to the downstream FortiGate.
2. Go to Security Fabric > Fabric Connectors and double-click the Security Fabric Setup card.
3. Enable SAML Single Sign-On. The Mode field is automatically populated as Service Provider (SP).
4. Enter an IP address in the Management IP/FQDN box.
5. Enter a management port in the Management port box.
The Management IP/FQDN will be used by the IdP and so other SPs can redirect to each other. The Management
port must be reachable from the user's device.
6. Select a Default login page option.
7. Select one of the following Default admin profile types: prof_admin, super_admin, or super_admin_readonly. The
no_access_admin profile is set as the default.
8. Click OK.
FortiOS 6.4.2 Administration Guide 200
Fortinet Inc.
Fortinet Security Fabric
Configuring certificates for SAML SSO
Because communication between the root FortiGate IdP and FortiGate SPs is secured, you must select a local server
certificate in the IdP certificate option on the root FortiGate. When downstream SPs join the IdP (root FortiGate), the SP
automatically obtains the certificate.
In the following SP example, the IdP certificate displays REMOTE_Cert_2, which is the root server certificate for the IdP:
It is possible to manually import a certificate from an SP to the IdP so it can be used for authentication.
To manually import an SP certificate to an IdP:
1. Add the certificate:
a. On the SP, go to Security Fabric > Fabric Connectors and double-click the Security Fabric Setup card.
b. Click Advanced Options. The SAML SSO pane opens.
c. Enable SP certificate and select a certificate from the dropdown box.
d. Click Download. The certificate is downloaded on the local file system.
e. Click OK.
2. Import the certificate:
a. On the IdP, go to Security Fabric > Fabric Connectors and double-click the Security Fabric Setup card.
b. Click Advanced Options. The SAML SSO pane opens.
c. In the Service Providers table, select the SP from step 1 and click Edit.
FortiOS 6.4.2 Administration Guide 201
Fortinet Inc.
Fortinet Security Fabric
d. Enable SP certificate and in the dropdown box, click Import.
The Upload Remote Certificate window opens.
e. Click Upload and select the certificate downloaded in step 1.
f. Click OK. The certificate is imported.
g. Click OK.
h. In the IdP certificate list, select the certificate that you imported.
i. Click OK.
Verifying the single-sign-on configuration
After you have logged in to a Security Fabric member using SSO, you can navigate between any Security Fabric
member with SSO configured.
To navigate between Security Fabric members:
1. Log in to a Security Fabric member that is using SSO.
2. In the top banner, click the name of the device you are logged in to. A list of Security Fabric members displays.
3. Click a Security Fabric member. The login page appears.
4. Select the option to log in via Single-Sign-On.
You are now logged in to the Security Fabric member with SSO. The letters "SSO" also display beside the user
name in the top banner.
5. Go to System > Administrators > Single-Sign-On Administrator to view the list of SSO admins created.
FortiOS 6.4.2 Administration Guide 202
Fortinet Inc.
Fortinet Security Fabric
CLI commands for SAML SSO
To enter a question mark (?) or a tab, Ctrl + V must be entered first. Question marks and tabs cannot be typed or copied
into the CLI Console or some SSH clients.
To configure the IdP:
config system saml
set status enable
set role identity-provider
set cert "Fortinet_Factory"
set server-address "172.16.106.74"
config service-providers
edit "csf_172.16.106.74:12443"
set prefix "csf_ngczjwqxujfsbhgr9ivhehwu37fml20"
set sp-entity-id "http://172.16.106.74/metadata/"
set sp-single-sign-on-url "https://172.16.106.74/saml/?acs"
set sp-single-logout-url "https://172.16.106.74/saml/?sls"
set sp-portal-url "https://172.16.106.74/saml/login/"
config assertion-attributes
edit "username"
next
edit "[email protected]"
set type email
next
end
next
end
end
To configure an SP:
config system saml
set status enable
set cert "Fortinet_Factory"
set idp-entity-id "http://172.16.106.74/saml-idp/csf_
ngczjwqxujfsbhgr9ivhehwu37fml20/metadata/"
set idp-single-sign-on-url "https://172.16.106.74/csf_
ngczjwqxujfsbhgr9ivhehwu37fml20/login/"
set idp-single-logout-url "https://172.16.106.74/saml-idp/csf_
ngczjwqxujfsbhgr9ivhehwu37fml20/logout/"
set idp-cert "REMOTE_Cert_1"
set server-address "172.16.106.74:12443"
end
To configure an SSO administrator:
config system sso-admin
edit "SSO-admin-name"
set accprofile <SSO admin user access profile>
set vdom <Virtual domain(s) that the administrator can access>
next
end
FortiOS 6.4.2 Administration Guide 203
Fortinet Inc.
Fortinet Security Fabric
SAML SSO with pre-authorized FortiGates
You can set up SAML SSO authentication in a Security Fabric environment by starting with a root FortiGate that has one
or more pre-authorized FortiGates.
After the initial configuration, you can add more downstream FortiGates to the Security Fabric, and they are
automatically configured with default values for a service provider.
To set up basic SAML SSO for the Security Fabric:
1. Log in to the root FortiGate of the Security Fabric.
2. Go to Security Fabric > Fabric Connectors and double-click the Security Fabric Setup card.
3. Join two pre-authorized FortiGates to the root FortiGate.
4. Configure the IdP (see Configuring the root FortiGate as the IdP on page 198).
5. Configure the SPs (see Configuring a downstream FortiGate as an SP on page 199).
Navigating between Security Fabric members with SSO
After you have logged in to a Security Fabric member by using SSO, you can navigate between any Security Fabric
member with SSO configured. This can be done using the Security Fabric members dropdown menu or by logging in to a
FortiGate SP from the root FortiGate IdP.
Security Fabric members dropdown
The Security Fabric members dropdown menu allows you to easily switch between all FortiGate devices that are
connected to the Security Fabric. You can also use this menu to customize a FortiGate in the Security Fabric.
To navigate between Security Fabric members:
1. Log in to a Security Fabric member by using SSO.
2. In the top banner, click the name of the device you are logged into with SSO.
A list of Security Fabric members is displayed.
3. Click the Security Fabric member.
You are logged in to the Security Fabric member without further authentication.
FortiOS 6.4.2 Administration Guide 204
Fortinet Inc.
Fortinet Security Fabric
To customize a FortiGate in the Security Fabric:
1. In the Security Fabric members dropdown menu, hover the cursor over a FortiGate so the tooltip is shown.
2. Click Configure. The Configure pane opens.
3. Edit the settings as required.
4. Click OK.
Logging in to an SP from the root IdP
The following example describes how to log in to a root FortiGate IdP, and navigate to other FortiGate SPs in the
Security Fabric without further authentication. The local administrator account is named test3. The local administrator
account must also be available as an SSO administrator account on all downstream FortiGate SPs. Different tabs of the
same browser are used to log in to the various FortiGates.
To log in to a FortiGate SP from a root FortiGate IdP:
1. Log in to the root FortiGate IdP by using the local administrator account.
In this example, the local administrator account is named test3.
2. Go to Security Fabric > Fabric Connectors and double-click the Security Fabric Setup card.
3. In the Topology tree, click one of the downstream FortiGate SPs, and select Login to <name of FortiGate>.
The login screen is displayed.
4. In the login screen, select Single Sign-On.
By using cookies in your local browser for the already-authenticated SSO administrator, FortiGate logs you in to the
downstream FortiGate SP as the SSO administrator. In this example, the SSO administrator name is test3.
FortiOS 6.4.2 Administration Guide 205
Fortinet Inc.
Fortinet Security Fabric
5. While still logged into the root FortiGate IdP in your browser, go to the browser tab for the root FortiGate IdP, and log
in to another FortiGate SP that is displayed on the Security Fabric pane in the GUI.
SAML SSO login uses SAML_IDP session cookies of already authenticated admin users in your local browser
cache to send to the root FortiGate IdP for authentication. If your browser cache is manually cleared, or you close
your browser, you must authenticate again.
It is possible to log in to one downstream FortiGate SP in a Security Fabric, and then open
another tab in your browser to connect to another FortiGate SP that is not a member of the
Security Fabric.
This is useful in cases where the SSO administrator and the local system administrator on the
FortiGate SP both have the same login name, but are two different entities.
FortiOS 6.4.2 Administration Guide 206
Fortinet Inc.
Fortinet Security Fabric
Integrating FortiAnalyzer management using SAML SSO
When a FortiGate is configured as the SAML SSO IdP, FortiAnalyzer can register itself as the SP (FortiAnalyzer must be
running version 6.4.0). Once registered, FortiAnalyzer will be added automatically to the Security Fabric navigation in
FortiOS. A similar dropdown navigation is displayed in FortiAnalyzer where users can navigate to the FortiGate using
SAML SSO.
The following example assumes the root FortiGate (FGTA-1, server address 172.17.48.225:4431) has been configured
as the SAML SSO IdP, and FortiAnalyzer logging has been enabled in the Security Fabric settings.
To enable FortiAnalyzer as a Fabric SP in the GUI:
1. In FortiAnalyzer, go to System Settings > Admin > SAML SSO.
2. For Single Sign-On Mode, click Fabric SP and enter the SP Address.
3. Click Apply.
FortiAnalyzer will automatically register itself on the FortiGate as an appliance visible in the list of SPs. Go to
Security Fabric > Fabric Connectors, edit the Security Fabric Setup connector, then click Advanced Options to view
the list of SPs.
To enable FortiAnalyzer as a Fabric SP in the CLI:
1. In FortiAnalyzer, enable the device as a Fabric SP:
config system saml
set status enable
set role FAB-SP
FortiOS 6.4.2 Administration Guide 207
Fortinet Inc.
Fortinet Security Fabric
set server-address "172.17.48.225:4253"
end
FortiAnalyzer will register itself on the FortiGate as an appliance. To view the configuration in FortiOS:
show system saml
config service-providers
edit "appliance_172.17.48.225:4253"
set prefix "csf_p0m9dvltwt28r3gt87runs2nb929mwz"
set sp-entity-id "http://172.17.48.225:4253/metadata/"
set sp-single-sign-on-url "https://172.17.48.225:4253/saml/?acs"
set sp-single-logout-url "https://172.17.48.225:4253/saml/?sls"
set sp-portal-url "https://172.17.48.225:4253/saml/login/"
config assertion-attributes
edit "username"
next
edit "profilename"
set type profile-name
next
end
next
end
To navigate between devices using SAML SSO:
1. Log in to the root FortiGate.
2. In the toolbar, click the device name to display the Security Fabric members dropdown.
3. Hover over the FortiAnalyzer and click Login.
4. Log in to the FortiAnalyzer using SAML SSO.
FortiOS 6.4.2 Administration Guide 208
Fortinet Inc.
Fortinet Security Fabric
5. In the toolbar, click the Security Fabric members dropdown to navigate between other FortiGates.
Integrating FortiManager management using SAML SSO
When a FortiGate is configured as the SAML SSO IdP, FortiManager can be added as an SP.
To configure FortiManager as a Fabric SP:
1. On the root FortiGate, go to Security Fabric > Fabric Connectors, and edit the Security Fabric Setup connector.
2. In the Security Fabric Settings section, click Advanced Options.
3. In the Service Providers section, click Create New.
4. Enter a name and a prefix for the SP. FortiOS generates a unique prefix, but you can enter your own.
5. In SP address, enter the FortiManager address including the port number.
6. Click OK.
7. In FortiManager, go to System Settings > Admin > SAML SSO and in the Single Sign-On Mode section, click
Service Provider (SP).
FortiOS 6.4.2 Administration Guide 209
Fortinet Inc.
Fortinet Security Fabric
8. Configure the IdP Settings:
a. For IdP Type, click Fortinet.
b. For IdP Address, enter the root FortiGate address including the port number.
c. Enter the Prefix of the SP.
d. For IdP Certificate, import the same certificate used on the root FortiGate.
e. Click Apply.
9. To verify that the configuration works, log out of FortiManager and log in using the Login via Single-Sign-On link.
Advanced option - FortiGate SP changes
From a root FortiGate IdP, you can edit each of the FortiGate SPs. For example, you can edit a FortiGate SP to generate
a new prefix, or you can add or modify SAML attributes. When you generate a new prefix value, it is propagated to the
respective downstream FortiGates.
To edit an SP from the root FortiGate (IdP):
1. Go to Security Fabric > Fabric Connectors and double-click the Security Fabric Setup card.
2. Click Advanced Options. The SAML SSO pane opens.
3. In the Service Providers table, select a device, and click Edit. The Edit Service Provider pane opens.
4. Edit the settings as needed.
5. Click OK.
FortiOS 6.4.2 Administration Guide 210
Fortinet Inc.
Fortinet Security Fabric
Advanced option - unique SAML attribute types
The default SAML attribute type is username. When the attribute type is set to username, SSO administrator accounts
created on FortiGate SPs use the login username that is provided by the user for authentication on the root FortiGate
IdP.
Because user names might not be unique, cases can occur where the user name is the same for the SSO administrator
and the local administrator on the FortiGate SP. As a result, you might be unable to distinguish between actions taken by
the local administrator and the SSO administrator on the FortiGate SP when looking at the system log. By using a unique
SAML attribute type, such as an email address, you can create unique user names to better track what actions were
taken by each administrator.
To configure a unique SAML attribute using the GUI:
1. On the root FortiGate (IdP), assign a unique email address to local administrator.
In this example, the local administrator name is test3.
a. Go to System > Administrators, and expand the list of local users.
b. Select the local user, and click Edit.
c. In the Type field, select Match a user on a remote server group.
d. In the Remote User Group field, select a group.
e. In the Email Address field, enter the email address.
f. Click OK.
FortiOS 6.4.2 Administration Guide 211
Fortinet Inc.
Fortinet Security Fabric
2. On the root FortiGate (IdP), update the SAML configuration:
a. Go to Security Fabric > Fabric Connectors and double-click the Security Fabric Setup card.
b. Click Advanced Options. The SAML SSO pane opens.
c. In the Service Providers table, select the FortiGate, and click Edit. The Edit Service Provider pane opens.
d. For SP type, select Custom.
e. In the SAML Attribute section for Type, select Email address.
f. Beside Type, select Email address.
g. Click OK.
After the administrator (test3) logs in to the FortiGate SP for the first time, SAML authentication occurs on FortiGate SP.
A new SSO administrator account is created, and the account name is now the email address instead of the login name
(test3).
FortiOS 6.4.2 Administration Guide 212
Fortinet Inc.
Fortinet Security Fabric
To view the new SSO administrator account:
1. In the SP, go to System > Administrators, and expand the list of SSO administrators.
The email address ([email protected]) is listed as the account name:
If the SAML attribute had been set to the default setting of username, the user name for the SSO administrator
account would have been (test3).
To view the SSO administrator activity in the log files:
1. In the SP, go to Log & Report > Events.
Because the SAML attribute is set to Custom, the SSO administrator account [email protected] is used as the
user name on the FortiGate SP, and it appears in the log files:
To configure a unique SAML attribute using the CLI:
config system saml
set status enable
set role identity-provider
set cert "fgt_g_san_extern_new"
set server-address "172.18.60.187"
config service-providers
edit "csf_172.18.60.185"
set prefix "csf_avju0tk4oiodifz3kbh2fms8dw688hn"
set sp-entity-id "http://172.18.60.185/metadata/"
set sp-single-sign-on-url "https://172.18.60.185/saml/?acs"
set sp-single-logout-url "https://172.18.60.185/saml/?sls"
set sp-portal-url "https://172.18.60.185/saml/login/"
config assertion-attributes
edit "username"
next
end
next
edit "FGTA-180"
set prefix "yxs8uhq47b5b2urq"
set sp-entity-id "http://172.18.60.180/metadata/"
FortiOS 6.4.2 Administration Guide 213
Fortinet Inc.
Fortinet Security Fabric
set sp-single-sign-on-url "https://172.18.60.180/saml/?acs"
set sp-single-logout-url "https://172.18.60.180/saml/?sls"
set sp-portal-url "https://172.18.60.180/saml/login/"
config assertion-attributes
edit "username"
next
end
next
edit "FGTA-184"
set prefix "3dktfo0gbxtldbts"
set sp-entity-id "http://172.18.60.184/metadata/"
set sp-single-sign-on-url "https://172.18.60.184/saml/?acs"
set sp-single-logout-url "https://172.18.60.184/saml/?sls"
set sp-portal-url "https://172.18.60.184/saml/login/"
config assertion-attributes
edit "username"
set type email
next
end
next
end
end
The csf_172.18.60.185 service provider was automatically added when the FortiGate SP 172.18.60.185 joined the
root FortiGate IdP in the Security Fabric.
All sp-* options, such as sp-portal-url, are set with default values when a service provider is created, but can be
modified using the CLI or GUI.
Security rating
The security rating uses real-time monitoring to analyze your Security Fabric deployment, identify potential
vulnerabilities, highlight best practices that can be used to improve the security and performance of your network, and
calculate Security Fabric scores.
To view the security rating, go to Security Fabric > Security Rating on the root FortiGate.
The Security Rating page is separated into three major scorecards: Security Posture, Fabric Coverage, and
Optimization, which provide an executive summary of the three largest areas of security focus in the Security Fabric.
FortiOS 6.4.2 Administration Guide 214
Fortinet Inc.
Fortinet Security Fabric
The scorecards show an overall letter grade and breakdown of the performance in sub-categories. Clicking a scorecard
drills down to a detailed report of itemized results and compliance recommendations. The point score represents the net
score for all passed and failed items in that area. In the drill down report, hover the cursor over a score to view the
calculation breakdown.
The report includes the security controls that were tested against, linking to specific FSBP or PCI compliance policies.
Click the FSBP and PCI buttons to reference the corresponding standard. Users can search or filter the report results.
Certain remediations marked with an EZ symbol represent configuration recommendations that support Easy Apply. In
the panel on the right, in the Recommendations section, click Apply to apply the changes to resolve the failed security
control.
The report table can be customized by adding more columns, such as Category, to view, filter, or sort the results based
on scorecard categories. Click the gear icon to customize the table.
FortiOS 6.4.2 Administration Guide 215
Fortinet Inc.
Fortinet Security Fabric
Users can also export the reports as CSV or JSON files by clicking the Export dropdown.
To exit the current view, click the icon beside the scorecard title to return to the summary view.
For more information about security ratings, and details about each of the checks that are performed, go to Security Best
Practices & Security Rating Feature.
Security rating licenses are required to run security rating checks across all the devices in the
Security Fabric. It also allows ratings scores to be submitted to and received from FortiGuard
for ranking networks by percentile.
See https://www.fortinet.com/support/support-services/fortiguard-security-
subscriptions/security-rating.html for information.
Security rating check scheduling
Security rating checks by default are scheduled to run automatically every four hours.
To disable automatic security checks using the CLI:
config system global
security-rating-run-on-schedule disable
end
To manually run a report using the CLI:
# diagnose report-runner trigger
Opt out of ranking
Security rating scores can be submitted to FortiGuard for comparison with other organizations' scores, allowing a
percentile score to be calculated. If you opt out of submitting your score, only an absolute score will be available.
FortiOS 6.4.2 Administration Guide 216
Fortinet Inc.
Fortinet Security Fabric
To opt out of submitting the score using the CLI:
config system global
set security-rating-result-submission {enable | disable}
end
Logging the security rating
The results of past security checks is available in Log & Report > Events by selecting Security Rating Events from the
event type dropdown list.
An event filter subtype can be created for the Security Fabric rating so that event logs are created on the root FortiGate
that summarize the results of a check, and show detailed information for the individual tests.
To configure security rating logging using the CLI:
config log eventfilter
set security-rating enable
end
Security Fabric score
The Security Fabric score is calculated when a security rating check is run, based on the severity level of the checks that
are passed or failed. A higher scores represents a more secure network. Points are added for passed checks and
removed for failed checks.
Severity level Weight (points)
Critical 50
FortiOS 6.4.2 Administration Guide 217
Fortinet Inc.
Fortinet Security Fabric
Severity level Weight (points)
High 25
Medium 10
Low 5
To calculate the number of points awarded to a device for a passed check, the following equation is used:
<severity level weight>
score = × <secure FortiGate multiplier>
<# of FortiGates>
The secure FortiGate multiplier is determined using logarithms and the number of FortiGate devices in the Security
Fabric.
For example, if there are four FortiGate devices in the Security Fabric that all pass the compatible firmware check, the
score for each FortiGate device is calculated with the following equation:
50
× 1.292 = 16.15 points
4
All of the FortiGate devices in the Security Fabric must pass the check in order to receive the points. If any one of the
FortiGate devices fails a check, the devices that passed are not awarded any points. For the device that failed the check,
the following equation is used to calculated the number of points that are lost:
score = <severity level weight> x <secure FortiGate multiplier>
For example, if the check finds two critical FortiClient vulnerabilities, the score is calculated with the following equation:
-50 × 2 = -100 points
Scores are not affected by checks that do not apply to your network. For example, if there are no FortiAP devices in the
Security Fabric, no points will be added or subtracted for the FortiAP firmware version check.
External connectors
The following external connector categories are available in the Security Fabric: Public SDN, Private SDN,
Endpoint/Identity, and Threat Feeds.
FortiOS 6.4.2 Administration Guide 218
Fortinet Inc.
Fortinet Security Fabric
If VDOMs are enabled, SDN and Threat Feeds connectors are in the global settings, and
Endpoint/Identity connectors are per VDOM.
SDN connectors
Fabric connectors to SDNs provide integration and orchestration of Fortinet products with SDN solutions. Fabric
connectors ensure that any changes in the SDN environment are automatically updated in your network.
There are four steps to creating and using an SDN connector:
1. Gather the required information
2. Create the fabric connector on page 219
3. Create a fabric connector address on page 220
4. Add the address to a firewall policy on page 221
An example of creating a Microsoft Azure SDN connector is available at Configuring an SDN connector in Azure.
Create the fabric connector
To create an SDN Fabric connector in the GUI:
1. Go to Security Fabric > External Connectors.
2. Click Create New.
3. Click the service that you are using.
4. Enter the Name, Status, and Update Interval for the connector.
FortiOS 6.4.2 Administration Guide 219
Fortinet Inc.
Fortinet Security Fabric
5. Enter the previously collected information for the specific connector that you are creating.
6. Click OK.
To create an SDN Fabric connector in the CLI:
config system sdn-connector
edit <name>
set status {enable | disable}
set type {connector type}
...
set update-interval <integer>
next
end
The available CLI commands will vary depending on the selected SDN connector type.
Create a fabric connector address
A fabric connector address can be used in the following ways:
l As the source or destination address for firewall policies.
l To automatically update changes to addresses in the environment of the service that you are using, based on
specified filtering conditions.
l To automatically apply changes to firewall policies that use the address, based on specified filtering conditions.
To create a fabric connector address in the GUI:
1.Go to Policy & Objects > Addresses.
2.Click Create New > Address.
3.Enter a name for the address.
4.Set the Type to Fabric Connector Address.
5.Select an SDN Connector from the dropdown list, or click Create New to make a new one.
6.Set the SDN address type. Only addresses of the selected type will be collected.
7.Configure the connector specific settings.
8.Select an Interface for the address, or leave it as any, enable or disable Show in Address List, and optionally add
Comments.
9. Add tags.
10. Click OK.
To create a fabric connector address in the CLI:
config firewall address
edit <name>
set type dynamic
set sdn <sdn_connector>
set visibility enable
set associated-interface <interface_name>
FortiOS 6.4.2 Administration Guide 220
Fortinet Inc.
Fortinet Security Fabric
set color <integer>
...
set comment <comment>
config tagging
edit <name>
set category <string>
set tags <strings>
next
end
next
end
The available CLI commands will vary depending on the selected SDN connector type.
Add the address to a firewall policy
A fabric connector address can be used as either the source or destination address.
To add the address to a firewall policy in the GUI:
1. Go to Policy & Objects > Firewall Policy.
2. Click Create New.
3. Enter a name for the policy.
4. Set the incoming and outgoing interfaces.
5. Use the fabric connector address as the source or destination address.
6. Configure the remaining settings as needed.
7. Click OK.
To add the address to a firewall policy in the CLI:
config firewall policy
edit 0
set name <name>
set srcintf <port_name>
set dstintf <port_name>
set srcaddr <firewall_address>
set dstaddr <firewall_address>
set action accept
set schedule <schedule>
set service <service>
next
end
Connector tooltips
In the Security Fabric > External Connectors page, hover over an SDN connector to view a tooltip that shows basic
configuration information.
FortiOS 6.4.2 Administration Guide 221
Fortinet Inc.
Fortinet Security Fabric
There are three buttons that provide additional information:
l View Connector Objects shows the connector's dynamic objects, such as filters and instances.
l View Policies shows a list of policies that use the dynamic addresses from the connector.
l View Automation Rules shows a list of automation actions that use the connector.
AliCloud SDN connector
FortiOS automatically updates dynamic addresses for AliCloud using an AliCloud SDN connector, including mapping the
following attributes from AliCloud instances to dynamic address groups in FortiOS:
l ImageId
l InstanceId
l SecurityGroupId
l VpcId
l VSwitchId
l TagKey
l TagValue
To configure AliCloud SDN connector using the GUI:
1. Configure the AliCloud SDN connector:
a. Go to Security Fabric > External Connectors.
b. Click Create New, and select AliCloud.
c. Configure as shown, substituting the access key, secret, and region ID for your deployment. The update
FortiOS 6.4.2 Administration Guide 222
Fortinet Inc.
Fortinet Security Fabric
interval is in seconds.
2. Create a dynamic firewall address for the configured AliCloud SDN connector:
a. Go to Policy & Objects > Addresses.
b. Click Create New, then select Address.
c. Configure the address as shown, selecting the desired filter in the Filter dropdown list. In this example, the
AliCloud SDN connector will automatically populate and update IP addresses only for instances that belong to
the specified security group:
3. Ensure that the AliCloud SDN connector resolves dynamic firewall IP addresses:
a. Go to Policy & Objects > Addresses.
b. Hover over the address created in step 2 to see a list of IP addresses for instances that belong to the security
FortiOS 6.4.2 Administration Guide 223
Fortinet Inc.
Fortinet Security Fabric
group configured in step 2:
To configure AliCloud SDN connector using CLI commands:
1. Configure the AliCloud SDN connector:
config system sdn-connector
edit "ali1"
set type acs
set access-key "LTAIKmERWEuEOChg"
set secret-key xxxxx
set region "us-west-1"
set update-interval 30
next
end
2. Create a dynamic firewall address for the configured AliCloud SDN connector with the supported AliCloud filter. In
this example, the AliCloud SDN Connector will automatically populate and update IP addresses only for instances
that belong to the specified security group:
config firewall address
edit "ali-address-security"
set type dynamic
set sdn "ali1"
set filter "SecurityGroupId=sg-rj9bp5ax5kwy3gqdizqb"
next
end
3. Confirm that the AliCloud SDN connector resolves dynamic firewall IP addresses using the configured filter:
config firewall address
edit "ali-address-security"
set type dynamic
set sdn "ali1"
set filter "SecurityGroupId=sg-rj9bp5ax5kwy3gqdizqb"
config list
edit "10.0.0.16"
next
edit "10.0.0.17"
next
edit "10.0.0.20"
next
end
next
end
AWS SDN connector with IAM credentials
FortiOS 6.4.2 Administration Guide 224
Fortinet Inc.
Fortinet Security Fabric
For instances running in AWS (on demand or BYOL), you can set up the AWS SDN connector using AWS Identify and
Access Management (IAM) credentials.
IAM authentication is available only for FGT-AWS and FGT-AWSONDEMAND platforms.
To configure AWS SDN connector using the GUI:
1. Configure the AWS SDN connector:
a. Go to Security Fabric > External Connectors.
b. Click Create New, and select Amazon Web Services (AWS).
c. Configure as shown:
2. Create a dynamic firewall address for the configured AWS SDN connector:
a. Go to Policy & Objects > Addresses.
b. Click Create New, then select Address.
c. Configure the address as shown, selecting the desired filter in the Filter dropdown list.
The following is an example for a public SDN address type:
The following is an example for a private SDN address type:
FortiOS 6.4.2 Administration Guide 225
Fortinet Inc.
Fortinet Security Fabric
3. Ensure that the AWS SDN connector resolves dynamic firewall IP addresses:
a. Go to Policy & Objects > Addresses.
b. Hover over the address created in step 2 to see a list of IP addresses for instances that belong to the security
group configured in step 2.
The following is an example for a public SDN address type:
The following is an example for a private SDN address type:
FortiOS 6.4.2 Administration Guide 226
Fortinet Inc.
Fortinet Security Fabric
To configure AWS SDN connector using CLI commands:
1. Configure the AWS connector:
config system sdn-connector
edit "aws1"
set status enable
set type aws
set use-metadata-iam enable
set update-interval 60
next
end
2. Create a dynamic firewall address for the configured AWS SDN connector with the supported filter:
Dynamic firewall address IPs are resolved by the SDN connector.
config firewall address
edit "aws-ec2"
set type dynamic
set sdn "aws1"
set filter "SecurityGroupId=sg-05f4749cf84267548"
set sdn-addr-type public
next
edit "aws-eks1"
set type dynamic
set sdn "aws1"
set filter "K8S_Region=us-west-2"
next
end
3. Confirm that the AWS SDN connector resolves dynamic firewall IP addresses using the configured filter:
config firewall address
edit "aws-ec2"
set type dynamic
set sdn "aws1"
set filter "SecurityGroupId=sg-05f4749cf84267548"
set sdn-addr-type public
FortiOS 6.4.2 Administration Guide 227
Fortinet Inc.
Fortinet Security Fabric
config list
edit "34.222.246.198"
next
edit "54.188.139.177"
next
edit "54.218.229.229"
next
end
next
edit "aws-eks1"
set type dynamic
set sdn "aws1"
set filter "K8S_Region=us-west-2"
config list
edit "192.168.114.197"
next
edit "192.168.167.20"
next
edit "192.168.180.72"
next
edit "192.168.181.186"
next
edit "192.168.210.107"
next
end
next
end
Azure Stack SDN connector
FortiOS automatically updates dynamic addresses for Azure Stack on-premise environments using an Azure Stack
SDN connector, including mapping the following attributes from Azure Stack instances to dynamic address groups in
FortiOS:
l vm
l tag
l size
l securitygroup
l vnet
l subnet
l resourcegroup
l vmss
To configure Azure Stack SDN connector using the GUI:
1. Configure the Azure Stack SDN connector:
a. Go to Security Fabric > External Connectors.
b. Click Create New, and select Microsoft Azure.
c. Configure as shown, substituting the Azure Stack settings for your deployment. The update interval is in
FortiOS 6.4.2 Administration Guide 228
Fortinet Inc.
Fortinet Security Fabric
seconds.
2. Create a dynamic firewall address for the configured Azure Stack SDN connector:
a. Go to Policy & Objects > Addresses.
b. Click Create New, then select Address.
c. Configure the address as shown, selecting the desired filter in the Filter dropdown list. In this example, the
Azure Stack SDN connector will automatically populate and update IP addresses only for instances that are
named tfgta:
3. Ensure that the Azure Stack SDN connector resolves dynamic firewall IP addresses:
a. Go to Policy & Objects > Addresses.
b. Hover over the address created in step 2 to see a list of IP addresses for instances that are named tftgta as
configured in step 2:
FortiOS 6.4.2 Administration Guide 229
Fortinet Inc.
Fortinet Security Fabric
To configure Azure Stack SDN connector using CLI commands:
1. Configure the Azure Stack SDN connector:
config system sdn-connector
edit "azurestack1"
set type azure
set azure-region local
set server "azurestack.external"
set username "[email protected]"
set password xxxxx
set log-in endpoint "https://login.microsoftonline.com/942b80cd-1b14-42a1-8dcf-
4b21dece61ba"
set resource-url
"https://management.azurestoreexamplecompany.onmicrosoft.com/12b6fedd-9364-
4cf0-822b-080d70298323"
set update-interval 30
next
end
2. Create a dynamic firewall address for the configured Azure Stack SDN connector with the supported Azure Stack
filter. In this example, the Azure Stack SDN Connector will automatically populate and update IP addresses only for
instances that are named tfgta:
config firewall address
edit "azurestack-address-name1"
set type dynamic
set sdn "azurestack1"
set filter "vm=tfgta"
next
end
3. Confirm that the Azure Stack fabric connector resolves dynamic firewall IP addresses using the configured filter:
config firewall address
edit "azurestack-address-name1"
set type dynamic
set sdn "azurestack1"
set filter "vm=tfgta"
config list
edit "10.0.1.4"
next
edit "10.0.2.4"
next
edit "10.0.3.4"
next
edit "10.0.4.4"
next
edit "192.168.102.32"
next
edit "192.168.102.35"
next
end
next
end
Azure SDN connector for non-VM resources
IP address resolving functionality is available for the following Azure resources:
FortiOS 6.4.2 Administration Guide 230
Fortinet Inc.
Fortinet Security Fabric
l VM network interfaces (including VMSS)
l Internet-facing load balancers
l Internal load balancers
l Application gateways
VPN gateways are currently not supported.
The following example demonstrates configuring an internet-facing load balancer.
To configure an internet-facing load balancer address in the GUI:
1. Configure the Azure SDN connector:
a. Go to Security Fabric > External Connectors.
b. Click Create New, and select Microsoft Azure.
c. Enter the settings based on your deployment, and click OK. The update interval is in seconds.
2. Create the dynamic firewall address:
a. Go to Policy & Objects > Addresses.
b. Click Create New > Address and enter a name.
c. Configure the following settings:
i. For Type, select Dynamic.
ii. For Sub Type, select Fabric Connector Address.
iii. For SDN Connector, select azure-dev.
iv. For SDN address type, select All.
v. For Filter, enter Tag.devlb=lbkeyvalue.
FortiOS 6.4.2 Administration Guide 231
Fortinet Inc.
Fortinet Security Fabric
d. Click OK.
The corresponding IP addresses are dynamically updated and resolved after applying the tag filter.
3. Ensure that the connector resolves the dynamic firewall IP address:
a. Go to Policy & Objects > Addresses.
b. In the address table, hover over the address created in step 2 to view what IP it resolves to:
c. In Azure, verify to confirm the IP address matches:
To configure an internet-facing load balancer in the CLI:
1. Configure the Azure SDN connector:
config system sdn-connector
edit "azure-dev"
set status enable
set type azure
set azure-region global
set tenant-id "942b80cd-1b14-42a1-8dcf-4b21dece61ba"
set client-id "44e79db7-621d-46f3-8625-58e209654e58"
set client-secret xxxxxxxxxx
set update-interval 60
next
end
2. Create the dynamic firewall address:
config firewall address
edit "taginternetfacinglb"
set type dynamic
set sdn "azure-dev"
set filter "Tag.devlb=lbkeyvalue"
set sdn-addr-type all
next
end
FortiOS 6.4.2 Administration Guide 232
Fortinet Inc.
Fortinet Security Fabric
The corresponding IP addresses are dynamically updated and resolved after applying the tag filter.
3. Confirm that the connector resolves the dynamic firewall IP address:
config firewall address
edit "taginternetfacinglb"
show
config firewall address
edit "taginternetfacinglb"
set uuid df391760-3bb6-51ea-f775-421df18f368d
set type dynamic
set sdn "azure-dev"
set filter "Tag.devlb=lbkeyvalue"
set sdn-addr-type all
config list
edit "52.230.230.83"
next
end
next
end
next
end
Azure SDN connector ServiceTag and Region filter keys
The ServiceTag and Region filter keys can be used in Azure SDN connectors to filter service tag IP ranges. These can
be used in dynamic firewall addresses.
To use the new filters keys in the GUI:
1. Create an Azure SDN connector:
a. Go to Security Fabric > External Connectors and click Create New.
b. Select Microsoft Azure.
c. Configure the connector:
d. Click OK.
FortiOS 6.4.2 Administration Guide 233
Fortinet Inc.
Fortinet Security Fabric
2. Create a dynamic firewall address for the Azure connector, filtering based on the servicetag and region:
a. Go to Policy & Objects > Addresses and click Create New > Address.
b. Configure the address, adding two filters: ServiceTag=ApiManagement and Region=canadacentral:
c. Click OK.
d. Hover the cursor over the address name to see the dynamic IP addresses that are resolved by the connector:
To use the new filters keys in the CLI:
1. Create an Azure SDN connector:
config system sdn-connector
edit "azure1"
set type azure
set tenant-id "942b80cd-1b14-42a1-8dcf-4b21dece61ba"
set client-id "44e79db7-621d-46f3-8625-58e209654e58"
set client-secret xxxxxx
next
end
2. Create a dynamic firewall address for the Azure connector, filtering based on the servicetag and region:
config firewall address
edit "azure-address-sertag1-o-region1"
set type dynamic
set sdn "azure1"
set color 2
set filter "ServiceTag=ApiManagement | Region=canadacentral"
FortiOS 6.4.2 Administration Guide 234
Fortinet Inc.
Fortinet Security Fabric
next
end
3. View the dynamic IP addresses that are resolved by the connector:
# show firewall address azure-address-sertag1
config firewall address
edit "azure-address-sertag1"
set uuid 50a0afd4-b1bf-51ea-651b-f9ba7f6db455
set type dynamic
set sdn "azure1"
set color 2
set filter "ServiceTag=ApiManagement | Region=canadacentral"
config list
edit "102.133.0.79/32"
next
edit "102.133.130.197/32"
next
...
edit "13.78.108.176/28"
next
edit "13.86.102.66/32"
next
...
end
next
end
IBM Cloud SDN connector
FortiOS can automatically update dynamic addresses for IBM Cloud using an SDN connector.
The dynamic addresses can be filtered with the following filters:
l <InstanceId>
l <InstanceName>
l <ImageId>
l <ImageName>
l <Architecture>
l <Profile>
l <Vpc>
l <Zone>
l <Subnet>
l <ResourceGroup>
To configure IBM Cloud SDN connectors using the GUI:
1. Create SDN connectors for compute generation 1 and 2:
a. Go to Security Fabric > External Connectors.
b. Click Create New, then select IBM Cloud.
FortiOS 6.4.2 Administration Guide 235
Fortinet Inc.
Fortinet Security Fabric
c. Configure the connector for computer generation 1:
d. Click OK.
e. Click Create New, then select IBM Cloud.
f. Configure the connector for computer generation 2:
g. Click OK.
2. Create dynamic firewall addresses for the configured connectors:
a. Go to Policy & Objects > Addresses.
b. Click Create New > Address.
c. Configure an address for computer generation 1:
d. Click OK.
e. Click Create New > Address.
FortiOS 6.4.2 Administration Guide 236
Fortinet Inc.
Fortinet Security Fabric
f. Configure an address for computer generation 2:
g. Click OK.
3. Ensure that the connectors resolve dynamic firewall IP addresses:
a. Go to Policy & Objects > Addresses.
b. Hover over the addresses created in step 2 to see a list of IP addresses resolved by the connector:
To configure IBM Cloud SDN connectors using the CLI:
1. Create SDN connectors for compute generation 1 and 2:
config system sdn-connector
edit "ibm_gen1"
set status enable
set type ibm
set api-key xxxxxx
set compute-generation 1
set ibm-region us-south
set update-interval 60
next
edit "ibm_gen2"
set status enable
set type ibm
set api-key xxxxxx
set compute-generation 2
set ibm-region us-east
set update-interval 60
next
end
2. Create dynamic firewall addresses for the configured connectors:
config firewall address
edit "ibm_gen1_add1"
set type dynamic
FortiOS 6.4.2 Administration Guide 237
Fortinet Inc.
Fortinet Security Fabric
set sdn "ibm_gen1"
set color 19
set filter "Vpc=alex-vpc1"
next
edit "ibm_gen2_add1"
set type dynamic
set sdn "ibm_gen2"
set color 19
set filter "ResourceGroup=alex-grp2"
next
end
3. Ensure that the connectors resolve dynamic firewall IP addresses:
# show firewall address ibm_gen1_add1
config firewall address
edit "ibm_gen1_add1"
set uuid 586841c4-7f46-51ea-dc66-dbf840af03d3
set type dynamic
set sdn "ibm_gen1"
set color 19
set filter "Vpc=alex-vpc1"
config list
edit "10.240.0.49"
next
edit "10.240.0.75"
next
edit "169.61.227.88"
next
edit "52.117.170.31"
next
end
next
end
# show firewall address ibm_gen2_add1
config firewall address
edit "ibm_gen2_add1"
set uuid 5868c4f0-7f46-51ea-2b79-b5170fbfd4a8
set type dynamic
set sdn "ibm_gen2"
set color 19
set filter "ResourceGroup=alex-grp2"
config list
edit "10.241.128.4"
next
edit "10.241.128.5"
next
edit "10.241.129.4"
next
edit "52.117.126.69"
next
end
next
end
FortiOS 6.4.2 Administration Guide 238
Fortinet Inc.
Fortinet Security Fabric
VMware ESXi SDN connector
Dynamic addresses for VMware ESXi and vCenter servers can be automatically updated by using a VMware ESXi
SDN connector, including mapping the following attributes from VMware ESXi and vCenter objects to dynamic address
groups in FortiOS:
l vmid
l host
l name
l uuid
l vmuuid
l vmnetwork
l guestid
l guestname
l annotation
To configure VMware ESXi SDN connector using the GUI:
1. Configure the VMware ESXi SDN connector:
a. Go to Security Fabric > External Connectors.
b. Click Create New, and select VMware ESXi.
c. Configure as shown, substituting the server IP address, username, and password for your deployment. The
update interval is in seconds.
2. Create a dynamic firewall address for the configured VMware ESXi SDN connector:
a. Go to Policy & Objects > Addresses.
b. Click Create New, then select Address.
c. Configure the address as shown, selecting the desired filter in the Filter dropdown list. In this example, the
VMware ESXi fabric connector will automatically populate and update IP addresses only for instances that
FortiOS 6.4.2 Administration Guide 239
Fortinet Inc.
Fortinet Security Fabric
belong to VLAN80:
3. Ensure that the VMware ESXi SDN connector resolves dynamic firewall IP addresses:
a. Go to Policy & Objects > Addresses.
b. Hover over the address created in step 2 to see a list of IP addresses for instances that belong to VLAN80 as
configured in step 2:
To configure VMware ESXi SDN connector using CLI commands:
1. Configure the VMware ESXi SDN connector:
config system sdn-connector
edit "vmware1"
set type vmware
set server "172.17.48.222"
set username "example_username"
set password xxxxx
set update-interval 30
next
end
2. Create a dynamic firewall address for the configured VMware ESXi SDN connector with the supported VMware
ESXi filter. In this example, the VMware ESXi SDN connector will automatically populate and update IP addresses
only for instances that belong to the specified VLAN:
config firewall address
FortiOS 6.4.2 Administration Guide 240
Fortinet Inc.
Fortinet Security Fabric
edit "vmware-network"
set type dynamic
set sdn "vmware1"
set filter "vmnetwork=VLAN80"
next
end
3. Confirm that the VMware ESXi SDN connector resolves dynamic firewall IP addresses using the configured filter:
config firewall address
edit "vmware-network"
set type dynamic
set sdn "vmware1"
set filter "vmnetwork=VLAN80"
config list
edit "192.168.8.240"
next
end
next
end
VMware NSX-T manager SDN connector
This feature provides SDN connector configuration for VMware NSX-T manager. You can import specific groups, or all
groups from the NSX-T manager.
To configure SDN connector for NSX-T manager in the GUI:
1. Go to Security Fabric > External Connectors and click Create New.
2. In the Private SDN section, click VMware NSX.
FortiOS 6.4.2 Administration Guide 241
Fortinet Inc.
Fortinet Security Fabric
3. Enter the settings and click OK.
To configure SDN connector for NSX-T manager in the CLI:
config system sdn-connector
edit "nsx_t24"
set type nsx
set server "172.18.64.205"
set username "admin"
set password xxxxxx
next
end
To import a specific group from the NSX-T manager:
# execute nsx group import nsx_t24 root csf_ns_group
[1] 336914ba-0660-4840-b0f1-9320f5c5ca5e csf_ns_group:
Name:csf_ns_group
Address:1.1.1.0
FortiOS 6.4.2 Administration Guide 242
Fortinet Inc.
Fortinet Security Fabric
Address:1.1.1.1
Address:172.16.10.104
Address:172.16.20.104
Address:172.16.30.104
Address:2.2.2.0
Address:2.2.2.2
Address:4.4.4.0
Address:5.5.5.0
Address:6.6.6.6
Address:7.7.7.7
To import all groups from NSX-T manager:
# execute nsx group import nsx_t24 root
[1] 663a7686-b9a3-4659-b06f-b45c908349a0 ServiceInsertion_NSGroup:
Name:ServiceInsertion_NSGroup
Address:10.0.0.2
[2] 336914ba-0660-4840-b0f1-9320f5c5ca5e csf_ns_group:
Name:csf_ns_group
Address:1.1.1.0
Address:1.1.1.1
Address:172.16.10.104
Address:172.16.20.104
Address:172.16.30.104
Address:2.2.2.0
Address:2.2.2.2
Address:4.4.4.0
Address:5.5.5.0
Address:6.6.6.6
Address:7.7.7.7
[3] c462ec4d-d526-4ceb-aeb5-3f168cecd89d charlie_test:
Name:charlie_test
Address:1.1.1.1
Address:2.2.2.2
Address:6.6.6.6
Address:7.7.7.7
[4] ff4dcb08-53cf-46bd-bef4-f7aeda9c0ad9 fgt:
Name:fgt
Address:172.16.10.101
Address:172.16.10.102
Address:172.16.20.102
Address:172.16.30.103
[5] 3dd7df0d-2baa-44e0-b88f-bd21a92eb2e5 yongyu_test:
Name:yongyu_test
Address:1.1.1.0
Address:2.2.2.0
Address:4.4.4.0
Address:5.5.5.0
FortiOS 6.4.2 Administration Guide 243
Fortinet Inc.
Fortinet Security Fabric
To view the dynamic firewall IP addresses that are resolved by the SDN connector in the GUI:
1. Go to Policy & Objects > Addresses to view the IP addresses resolved by an SDN connector.
To view the dynamic firewall IP addresses that are resolved by the SDN connector in the CLI:
# show firewall address csf_ns_group
config firewall address
edit "csf_ns_group"
set uuid ee4a2696-bacd-51e9-f828-59457565b880
set type dynamic
set sdn "nsx_t24"
set obj-id "336914ba-0660-4840-b0f1-9320f5c5ca5e"
config list
edit "1.1.1.0"
next
edit "1.1.1.1"
next
edit "172.16.10.104"
next
edit "172.16.20.104"
next
edit "172.16.30.104"
next
edit "2.2.2.0"
next
edit "2.2.2.2"
next
edit "4.4.4.0"
next
edit "5.5.5.0"
next
edit "6.6.6.6"
next
edit "7.7.7.7"
FortiOS 6.4.2 Administration Guide 244
Fortinet Inc.
Fortinet Security Fabric
next
end
next
end
OpenStack (Horizon) SDN connector with domain filter
You can select a domain attribute when configuring an OpenStack SDN connector in FortiOS. When a domain is
configured for the OpenStack SDN connector, FortiOS resolves OpenStack dynamic firewall addresses from the
specified OpenStack domain. If a domain is not specified, FortiOS resolves the dynamic firewall addresses using the
default OpenStack domain.
To configure OpenStack SDN connector with a domain filter using the GUI:
1. Configure the OpenStack SDN connector:
a. Go to Security Fabric > External Connectors.
b. Click Create New, and select Openstack (Horizon).
c. In the Domain field, enter the desired domain name from OpenStack. The fabric connector will only resolve IP
addresses for instances that belong to the specified domain.
d. Configure as shown, substituting the server IP address, username, and password for your deployment. The
update interval is in seconds.
2. Create a dynamic firewall address for the configured OpenStack SDN connector:
a. Go to Policy & Objects > Addresses.
b. Click Create New, then select Address.
c. Configure the address as shown, selecting the desired filter in the Filter dropdown list. The OpenStack
SDN connector will automatically populate and update IP addresses only for instances that belong to the
FortiOS 6.4.2 Administration Guide 245
Fortinet Inc.
Fortinet Security Fabric
specified domain and network:
3. Ensure that the OpenStack SDN connector resolves dynamic firewall IP addresses:
a. Go to Policy & Objects > Addresses.
b. Hover over the address created in step 2 to see a list of IP addresses for instances that belong to the specified
domain and specified network as configured in steps 1 and 2:
To configure OpenStack SDN connector with a domain filter using CLI commands:
1. Configure the OpenStack SDN connector. The SDN connector will only resolve IP addresses for instances that
belong to the specified domain:
config system sdn-connector
edit "openstack-domain"
set type openstack
set server "http://172.16.165.86:5000"
set username "example_username"
set password xxxxx
set domain "example_domain"
set update-interval 30
next
end
FortiOS 6.4.2 Administration Guide 246
Fortinet Inc.
Fortinet Security Fabric
2. Create a dynamic firewall address for the configured OpenStack SDN connector with the supported OpenStack
filter. The OpenStack SDN connector will automatically populate and update IP addresses only for instances that
belong to the specified domain and the specified network:
config firewall address
edit "openstack-domain-network"
set type dynamic
set sdn "openstack-domain"
set filter "Network=example-net1"
next
end
3. Confirm that the OpenStack SDN connector resolves dynamic firewall IP addresses using the configured domain
and filter:
config firewall address
edit "openstack-domain-network"
set type dynamic
set sdn "openstack-domain"
set filter "Network=example-net1"
config list
edit "10.0.0.13"
next
edit "10.0.0.16"
next
edit "10.0.0.3"
next
edit "172.24.4.18"
next
edit "172.24.4.24"
next
edit "172.24.4.3"
next
end
next
end
OCI SDN connector
You can configure Security Fabric connector integration with Oracle Cloud Infrastructure (OCI).
To configure an OCI SDN connector in the CLI:
1. Configure an SDN connector:
config system sdn-connector
edit "oci1"
set status enable
set type oci
set tenant-id
"ocid1.tenancy.oc1..aaaaaaaaaaa3aaaaaaaaaaaaaaaaa77xxxxxx54bbbbbb4xxxx35xx55xxxx"
set user-id
"ocid1.user.oc1..aaaaaaaaa2laaaaa3aaaaaaaaaabbbbbbbbbbcccc3ccccccccccxxxxxxxx"
set compartment-id
"ocid1.compartment.oc1..aaaaaaaaaaaaaaaaaa7bbbbbbbbbbcccccccccc6xxx53xxxx7xxxxxxxxxx"
set oci-region "us-ashburn-1"
set oci-region-type commercial
FortiOS 6.4.2 Administration Guide 247
Fortinet Inc.
Fortinet Security Fabric
set oci-cert "cert-sha2"
set update-interval 30
next
end
2. Create a dynamic firewall address for the SDN connector with a supported filter:
config firewall address
edit "oci-address-1"
set type dynamic
set sdn "oci1"
set filter "CompartmentName=DevelopmentEngineering"
next
end
To configure an OCI SDN connector in the GUI:
1. Go to Security Fabric > External Connectors and click Create New.
2. In the Public SDN section, select Oracle Cloud Infrastructure (OCI).
3. Configuration the connector as needed.
4. Click OK.
5. Go to Policy & Objects > Addresses and click Create New > Address.
FortiOS 6.4.2 Administration Guide 248
Fortinet Inc.
Fortinet Security Fabric
6. Configure the address as needed, selecting the OCI connector in the SDN Connector field.
7. Click OK.
To confirm that dynamic firewall addresses are resolved by the SDN connector:
1. In the CLI, check that the addresses are listed:
config firewall address
edit "oci-address-1"
set type dynamic
set sdn "oci1"
set filter "CompartmentName=DevelopmentEngineering"
config list
edit "10.0.0.11"
next
edit "10.0.0.118"
next
...
next
end
next
end
FortiOS 6.4.2 Administration Guide 249
Fortinet Inc.
Fortinet Security Fabric
2. In the GUI, go to Policy & Objects > Addresses and hover the cursor over the address name.
ClearPass endpoint connector via FortiManager
ClearPass Policy Manager (CPPM) is a network access system that can send information about authenticated users to
third party systems, such as a FortiGate or FortiManager.
In this example, communications are established between CPPM and FortiManager, and then the FortiManager
forwards information to a managed FortiGate. On the FortiGate, the user information can be used in firewall policies and
added to FSSO dynamic addresses.
Configure the FortiManager
Establish communications between FortiManager and CPPM so that FortiManager can synchronize CPPM user groups.
See Creating a ClearPass connector in the FortiManager Administration Guide.
FortiOS 6.4.2 Administration Guide 250
Fortinet Inc.
Fortinet Security Fabric
FortiManager forwards the group information to managed FortiGates.
Add CPPM FSSO user groups to a local user group
To add CPPM user groups to a local user group in the GUI:
1. On the FortiGate, go to User & Authentication > User Groups.
2. Click Create New.
3. Enter a name for the group and set Type to Fortinet Single Sign-On (FSSO).
4. Click the Members field, and add one or more FSSO groups.
FSSO groups can come from multiple sources; CPPM FSSO groups are prefixed with cp_ and are listed under the
FortiManager heading.
5. Click OK.
To add CPPM user groups to a local user group in the CLI:
config user group
edit fsso-group
set group-type fsso-service
set member "cp_test_[Employee]" "cp_test_FSSOROLE"
next
end
Use the local FSSO user group in a firewall policy
To add the local FSSO user group to a firewall policy in the GUI:
1. Go to Policy & Objects > Firewall Policy.
2. Create a new policy, or edit an existing one.
FortiOS 6.4.2 Administration Guide 251
Fortinet Inc.
Fortinet Security Fabric
3. Click in the Source field and add the fsso-group user group.
CPPM user groups can also be added directly to the policy.
4. Click OK.
To add the local FSSO user group to a firewall policy in the CLI:
config firewall policy
edit 1
set name "pol1"
set srcintf "port2"
set dstintf "port3"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set logtraffic all
set groups "fsso-group"
set nat enable
next
end
Verification
To verify that a user was added to the FSSO list on the FortiGate:
1. Log on to the client and authenticate with CPPM.
After successful authentication, the user is added to the FSSO list on the FortiGate.
FortiOS 6.4.2 Administration Guide 252
Fortinet Inc.
Fortinet Security Fabric
2. On the FortiGate, go to Monitor > Firewall User Monitor to verify that the user was added.
The user group cp_test_FSSOROLE is listed separately because the user is a member of that group on the CPPM.
To verify that traffic can pass the firewall:
1. Log on to the client and browse to an external website.
2. On the FortiGate, go to FortiView > Sources.
3. Double-click on the user and select the Destinations tab to verify that traffic is being passed by the firewall.
To verify the user address groups:
show user adgrp
config user adgrp
edit "cp_test_FSSOROLE"
set server-name "FortiManager"
next
edit "cp_test_[AirGroup v1]"
set server-name "FortiManager"
next
edit "cp_test_[AirGroup v2]"
set server-name "FortiManager"
next
edit "cp_test_[Aruba TACACS read-only Admin]"
set server-name "FortiManager"
next
edit "cp_test_[Aruba TACACS root Admin]"
set server-name "FortiManager"
next
edit "cp_test_[BYOD Operator]"
set server-name "FortiManager"
next
edit "cp_test_[Contractor]"
set server-name "FortiManager"
next
edit "cp_test_[Device Registration]"
set server-name "FortiManager"
next
...
FortiOS 6.4.2 Administration Guide 253
Fortinet Inc.
Fortinet Security Fabric
edit "CN=group1,OU=Testing,DC=Fortinet-FSSO,DC=COM"
set server-name "Local FSSO Agent" <----- !!!
next
end
Cisco pxGrid fabric connector
You can create an endpoint connector to Cisco pxGrid by using FortiManager. FortiManager dynamically collects
updates from pxGrid and forwards them to FortiGate by using the Fortinet Single Sign On (FSSO) protocol.
To create a Cisco pxGrid fabric connector:
1. On FortiManager, create an SSO Connector to Cisco ISE.
Communication between FortiManager and Cisco ISE is secured by using TLS. FortiManager requires a client
certificate issued by Cisco ISE. FortiManager uses the certificate to authenticate to Cisco ISE.
2. On FortiManager, map Cisco ISE groups to a Fortinet FSSO group.
Once a secured communication channel is established, Cisco sends all user groups to FortiManager.
The FortiManager administrator can select specific groups and map them to Fortinet FSSO groups.
FortiOS 6.4.2 Administration Guide 254
Fortinet Inc.
Fortinet Security Fabric
3. On FortiManager, add Fortinet FSSO group to a firewall policy in a policy package.
4. On FortiManager, synchronize the policy package to the firewall for the managed FortiGate.
5. On FortiGate, verify that the synced firewall policy contains the correct FSSO group and that all FSSO-related
information in user adgrp is correct.
FortiOS 6.4.2 Administration Guide 255
Fortinet Inc.
Fortinet Security Fabric
6. After successful user authentication on Cisco ISE, verify that information is forwarded to FortiManager.
On FortiManager, the icon next to the authenticated user in pxGrid Monitor should be green.
FortiGate should have two entries: one in the firewall-authenticated user list and one in the FSSO logged-on user
list.
In the FSSO logged-on user list, you can view both groups. You view the group that the user belongs to on Cisco
ISE and the Fortinet FSSO group.
FortiOS 6.4.2 Administration Guide 256
Fortinet Inc.
Fortinet Security Fabric
Cisco ACI SDN connector
Cisco ACI (Application Centric Infrastructure) SDN connectors can be used in dynamic firewall addresses.
The Fortinet SDN Connector for Cisco ACI and Nuage Networks is a standalone connector that connects to SDN
controllers within Cisco ACI and Nuage Networks. You must configure a connection to the Fortinet SDN connector in
FortiOS to query the dynamic addresses.
To configure a Cisco ACI connector in the GUI:
1. Create the Cisco ACI SDN connector:
a. Go to Security Fabric > External Connectors and click Create New.
b. In the Private SDN section, click Application Centric Infrastructure (ACI).
c. In the Cisco ACI Connector section, for Type, select Fortinet SDN Connector and configure the remaining
settings as needed.
d. Click OK.
2. Create the dynamic firewall address for the connector:
a. Go to Policy & Objects > Addresses and click Create New > Address.
b. Configure the following settings:
i. For Type, select Dynamic.
ii. For Sub Type, select Fabric Connector Address.
iii. For SDN Connector, select the first ACI connector.
iv. Configure the remaining settings as needed.
FortiOS 6.4.2 Administration Guide 257
Fortinet Inc.
Fortinet Security Fabric
c. Click OK.
To verify the dynamic firewall IPs are resolved by the SDN connector in the GUI:
1. Go to Policy & Objects > Addresses.
2. In the address table, hover over the address to view which IPs it resolves to.
To configure a Cisco ACI connector in the CLI:
1. Create the SDN connector:
config system sdn-connector
edit "aci1"
set type aci
set server "172.18.64.31"
set username "admin"
set password xxxxxxx
next
end
2. Create the dynamic firewall address for the connector:
config firewall address
edit "aci-address1"
set type dynamic
set sdn "aci1"
set color 17
set tenant "wqdai-ten"
set epg-name "EPG-in"
set sdn-tag "fffff"
next
end
To verify the dynamic firewall IPs are resolved by the SDN connector in the CLI:
# diagnose firewall dynamic list
List all dynamic addresses:
FortiOS 6.4.2 Administration Guide 258
Fortinet Inc.
Fortinet Security Fabric
aci1.aci.wqdai-ten.EPG-in.fffff: ID(171)
ADDR(192.168.100.20)
Cisco ACI SDN connector with direct connection
The Cisco ACI (Application Centric Infrastructure) connector can be used for northbound API integration with a direct
connection.
The following address filters are supported:
l Tenant
l Application
l Endpoint group
l Tag
To configure a Cisco ACI connector in the GUI:
1. Create the Cisco ACI SDN connector:
a. Go to Security Fabric > External Connectors and click Create New,.
b. In the Private SDN section, click Application Centric Infrastructure (ACI).
c. Configure the Connector Settings as needed. The update interval is in seconds.
d. In the Cisco ACI Connector section, for Type, select Direct Connection and configure the remaining settings as
needed.
e. Click OK.
2. Create a dynamic firewall address for the connector:
a. Go to Policy & Objects > Addresses.
b. Click Create New > Address and enter a name.
c. Configure the following settings:
i. For Type, select Dynamic.
ii. For Sub Type, select Fabric Connector Address.
iii. For SDN Connector, select the connector created in step 1.
iv. For Filter, select an entry from the dropdown list. In this example, Application is selected.
FortiOS 6.4.2 Administration Guide 259
Fortinet Inc.
Fortinet Security Fabric
d. Click OK.
3. Confirm that the connector resolves the dynamic firewall IP addresses:
a. Go to Policy & Objects > Addresses.
b. In the address table, hover over the address created in step 2 to view which IPs it resolves to:
To configure a Cisco ACI connector in the CLI:
1. Create the Cisco ACI SDN connector:
config system sdn-connector
edit "aci_direct1"
set status enable
set type aci-direct
set server "10.100.25.204"
set username "lzou"
set password xxxxxxx
set update-interval 60
next
end
FortiOS 6.4.2 Administration Guide 260
Fortinet Inc.
Fortinet Security Fabric
2. Create a dynamic firewall address for the connector:
config firewall address
edit "aci-direct-app"
set type dynamic
set sdn "aci_direct1"
set color 17
set filter "Application=lzou-app"
next
end
3. Confirm that the connector resolves the dynamic firewall IP addresses:
config firewall address
edit "aci-direct-app"
show
config firewall address
edit "aci-direct-app"
set uuid 794aaf20-3e33-51ea-57e1-10b5badf3fc7
set type dynamic
set sdn "aci_direct1"
set color 17
set filter "Application=lzou-app"
config list
edit "10.0.5.11"
next
edit "10.0.5.12"
next
edit "10.0.6.11"
next
edit "10.0.6.12"
next
edit "10.0.6.13"
next
edit "10.0.6.14"
next
edit "10.0.7.11"
next
edit "10.0.7.12"
next
end
next
end
next
end
Nuage SDN connector
You can use Nuage SDN connectors in dynamic firewall addresses.
The Fortinet SDN Connector for Cisco ACI and Nuage Networks is a standalone connector that connects to SDN
controllers within Cisco ACI and Nuage Networks. You must configure a connection to the Fortinet SDN connector in
FortiOS to query the dynamic addresses.
FortiOS 6.4.2 Administration Guide 261
Fortinet Inc.
Fortinet Security Fabric
To configure a Nuage connector in the GUI:
1. Create the Nuage SDN connector:
a. Go to Security Fabric > External Connectors and click Create New.
b. In the Private SDN section, click Nuage Virtualized Services Platform.
c. Configure the settings as needed.
d. Click OK.
2. Create the dynamic firewall address for the connector:
a. Go to Policy & Objects > Addresses and click Create New > Address.
b. Configure the following settings:
i. For Type, select Dynamic.
ii. For Sub Type, select Fabric Connector Address.
iii. For SDN Connector, select the first the first Nuage connector.
iv. Configure the remaining settings as needed.
c. Click OK.
FortiOS 6.4.2 Administration Guide 262
Fortinet Inc.
Fortinet Security Fabric
To verify the SDN connector resolves the dynamic firewall IP addresses in the GUI:
1. Go to Policy & Objects > Addresses.
2. In the address table, hover over an address to view which IP addresses it resolves to.
To configure a Nuage connector in the CLI:
1. Create the SDN connector:
config system sdn-connector
edit "nuage1"
set type nuage
set server "172.18.64.27"
set server-port 5671
set username "admin"
set password xxxxxxx
next
end
2. Create the dynamic firewall address for the connector:
config firewall address
edit "nuage-address1"
set type dynamic
set sdn "nuage1"
set color 19
set organization "nuage/L3"
set subnet-name "Subnet20"
next
end
To verify the SDN connector resolves the dynamic firewall IP addresses in the CLI:
# diagnose firewall dynamic list
List all dynamic addresses:
nuage1.nuage.nuage/L3.Subnet20.*: ID(196)
ADDR(192.168.20.92)
ADDR(192.168.20.240)
Multiple concurrent SDN connectors
You can configure multiple instances configured for every SDN connector. The specific connector instance must be
specified when creating a dynamic firewall address.
This topic provides examples of how to create two Microsoft Azure SDN connectors and use them in new dynamic
firewall addresses.
To create and use two new SDN connectors with the CLI:
1. Create two new SDN connectors:
config system sdn-connector
edit "azure1"
set type azure
FortiOS 6.4.2 Administration Guide 263
Fortinet Inc.
Fortinet Security Fabric
set tenant-id "942b80cd-bbbb-42a1-8888-4b21dece61ba"
set subscription-id "2f96c44c-cccc-4621-bbbb-65ba45185e0c"
set client-id "14dbd5cc-3333-4ea4-8888-68738141feb1"
set client-secret xxxxx
set update-interval 30
next
edit "azure2"
set type azure
set tenant-id "942b80cd-bbbb-42a1-8888-4b21dece61ba"
set client-id "3baa0acc-ffff-4444-b292-0777a2c36be6"
set client-secret xxxxx
set update-interval 30
next
end
2. Create new dynamic firewall addresses that use the new connectors:
config firewall address
edit "azure-address-location1"
set type dynamic
set color 2
set sdn azure1
set filter "location=WestUs"
next
edit "azure-address-location2"
set type dynamic
set color 2
set sdn azure2
set filter "location=NorthEurope"
next
end
To create and use two new SDN connectors with the GUI:
1. Create two new SDN connectors:
a. Go to Security Fabric > External Connectors, and click Create New in the toolbar.
b. Click on Microsoft Azure.
c. Fill in the required information, then click OK.
FortiOS 6.4.2 Administration Guide 264
Fortinet Inc.
Fortinet Security Fabric
d. Repeat the above steps for the second connector.
Two Microsoft Azure connectors will now be created.
2. Create new dynamic firewall addresses that use the new connectors:
a. Go to Policy and Objects > Addresses and click Create New > Address in the toolbar.
b. Enter a name for the address, and select Fabric Connector Address for the Type.
c. Select one of the previously created SDN connectors from the SDN Connector drop down list.
d. Configure the rest of the required information, then click OK to create the address.
e. Repeat the above steps to create the second address, selecting the other Microsoft Azure SDN connector.
Filter lookup in SDN connectors
When configuring dynamic address mappings for filters in SDN connectors for Azure, GCP, OpenStack, Kubernetes,
and AliCloud, FortiGate can query the filters automatically.
FortiOS 6.4.2 Administration Guide 265
Fortinet Inc.
Fortinet Security Fabric
To use the filter lookup:
1. Navigate to Policy & Objects > Addresses.
2. Create or edit an SDN connector type dynamic IP address.
Supported SDN connector types include: AWS, Azure, GCP, OpenStack, Kubernetes, and AliCloud. The example
below is for an Azure SDN connector.
3. In the address Filter field, you can perform the following actions:
l List all available filters.
l Search the available filters.
FortiOS 6.4.2 Administration Guide 266
Fortinet Inc.
Fortinet Security Fabric
l Create custom filters.
FortiOS 6.4.2 Administration Guide 267
Fortinet Inc.
Fortinet Security Fabric
l Set filter logic [and|or].
Support for wildcard SDN connectors in filter configurations
Wildcards are supported for SDN connectors when configuring dynamic address filters.
The following SDN connector types are currently supported:
l AWS
l Azure
l Google Cloud Platform
l Kubernetes
l OpenStack
l Oracle Cloud Infrastructure
l VMware ESXi
To configure a dynamic address filter for AWS in the GUI:
1. Create the SDN connector:
a. Go to Security Fabric > External Connectors.
b. Click Create New.
c. In the Public SDN section, click Amazon Web Services (AWS).
d. Configure the settings as needed.
e. Click OK.
2. Create the dynamic firewall address:
a. Go to Policy & Objects > Addresses.
b. Click Create New > Address
c. Enter a name for the address, then configure the following settings:
l Set Type to Dynamic.
l Set Sub Type to Fabric Connector Address.
l Set SDN Connector to aws1.
FortiOS 6.4.2 Administration Guide 268
Fortinet Inc.
Fortinet Security Fabric
l Set SDN address type to Private.
l For Filter, click Create, enter Tag.Name=aws*, the click OK.
d. Click OK.
3. In the address table, hover over the address to view what IPs it resolves to.
4. In AWS, verify to confirm the IP addresses match.
To configure a dynamic address filter for AWS in the CLI:
1. Configure the SDN connector:
config firewall address
edit "aws-address-1"
set type dynamic
set sdn "aws1"
set filter "Tag.Name=aws*"
set sdn-addr-type public
next
end
2. Create the dynamic firewall address and verify where the IP addresses resolve to:
config firewall address
edit "aws-address-1"
set type dynamic
set sdn "aws1"
FortiOS 6.4.2 Administration Guide 269
Fortinet Inc.
Fortinet Security Fabric
set filter "Tag.Name=aws*"
set sdn-addr-type public
config list
edit "18.234.167.123"
next
edit "3.81.41.167"
next
edit "52.87.157.127"
next
end
next
end
3. In AWS, verify that the IP addresses match.
Kubernetes (K8s) SDN connectors
The following topics provide information about configuring Kubernetes SDN connectors:
l Private Cloud K8s SDN connector on page 270
l AWS Kubernetes (EKS) SDN connector on page 272
l Azure Kubernetes (AKS) SDN connector on page 278
l GCP Kubernetes (GKE) SDN connector on page 275
l Oracle Kubernetes (OKE) SDN connector on page 280
Private Cloud K8s SDN connector
FortiOS automatically updates dynamic and cluster IP addresses for Kubernetes (K8s) by using a K8s SDN connector,
enabling FortiOS to manage K8s pods as global address objects, as with other connectors. This includes mapping the
following attributes from K8s instances to dynamic address groups in FortiOS:
Filter Description
Namespace Filter service IP addresses in a given namespace.
ServiceName Filter service IP addresses by the given service name.
NodeName Filter node IP addresses by the given node name.
PodName Filter IP addresses by the pod name.
Label.XXX Filter service or node IP addresses with the given label XXX. For example: K8S_
Label.app=nginx.
FortiOS collects cluster IP addresses in addition to external IP addresses for exposed Kubernetes services.
There is no maximum limit for the number of IP addresses populated with the filters.
FortiOS 6.4.2 Administration Guide 270
Fortinet Inc.
Fortinet Security Fabric
To configure K8s SDN connector using the GUI:
1. Configure the K8s SDN connector:
a. Go to Security Fabric > External Connectors.
b. Click Create New, and select Kubernetes.
c. Configure as shown substituting the IP address, port number, and secret token for your deployment. The
update interval is in seconds.
2. Create a dynamic firewall address for the configured K8S SDN connector:
a. Go to Policy & Objects > Addresses.
b. Click Create New, then select Address.
c. Configure the address as shown, selecting the desired filter in the Filter dropdown list. In this example, the
K8s SDN connector will automatically populate and update IP addresses only for node instances that match
the specified node name:
3. Ensure that the K8s SDN connector resolves dynamic firewall IP addresses:
a. Go to Policy & Objects > Addresses.
b. Hover over the address created in step 2 to see a list of IP addresses for node instances that match the node
FortiOS 6.4.2 Administration Guide 271
Fortinet Inc.
Fortinet Security Fabric
name configured in step 2:
To configure K8s SDN connector using CLI commands:
1. Configure the K8s SDN connector:
config system sdn-connector
edit "kubernetes1"
set type kubernetes
set server "172.18.64.38"
set server-port 6443
set secret-token xxxxx
set update-interval 30
next
end
2. Create a dynamic firewall address for the configured K8s SDN connector with the supported K8s filter. In this
example, the K8s SDN connector will automatically populate and update IP addresses only for node instances that
match the specified node name:
config firewall address
edit "k8s_nodename"
set type dynamic
set sdn "kubernetes1"
set filter "K8S_NodeName=van-201669-pc1"
next
end
3. Confirm that the K8s SDN connector resolves dynamic firewall IP addresses using the configured filter:
config firewall address
edit "k8s_nodename"
set type dynamic
set sdn "kubernetes1"
set filter "K8S_NodeName=van-201669-pc1"
config list
edit "172.16.65.227"
next
end
next
end
AWS Kubernetes (EKS) SDN connector
AWS SDN connectors support dynamic address groups based on AWS Kubernetes (EKS) filters.
FortiOS 6.4.2 Administration Guide 272
Fortinet Inc.
Fortinet Security Fabric
To filter out the Kubernetes IP addresses, the following address filters have been introduced:
k8s_cluster Name of Kubernetes cluster.
k8s_namespace Namespace of a Kubernetes service or pod.
k8s_svcname Name of a Kubernetes service.
k8s_nodename Name of a Kubernetes node.
k8s_zone Zone of a Kubernetes node.
k8s_region Region of a Kubernetes node.
k8s_podname Name of a Kubernetes pod.
k8s_label.xxx Name of label of a Kubernetes resource (cluster/service/node/Pod).
To enable an AWS SDN connector to fetch IP addresses from AWS Kubernetes:
1. Go to Security Fabric > External Connectors, and configure an SDN connector for AWS Kubernetes.
2. Go to Policies & Objects > Addresses and create a dynamic firewall address for the configured SDN connector
using the supported Kubernetes filter.
FortiOS 6.4.2 Administration Guide 273
Fortinet Inc.
Fortinet Security Fabric
3. To filter out the Kubernetes IP addresses, select the address filter or filters.
4. Configure the rest of the settings, then click OK.
The dynamic firewall address IP is resolved by the SDN connector.
To configure an AWS Kubernetes SDN connector through the CLI:
1. Configure an SDN connector for Kubernetes:
config system sdn-connector
edit "aws1"
set type aws
set access-key "AKIAIJNKE75ANVN5AEQA"
set secret-key xxxxx
set region "us-west-2"
set update-interval 30
next
end
2. Create a dynamic firewall address for the SDN connector with a supported Kubernetes filter:
config firewall address
edit "aws-pod"
set type dynamic
set sdn "aws1"
set filter "K8S_PodName=aws-node-g6zhx"
next
FortiOS 6.4.2 Administration Guide 274
Fortinet Inc.
Fortinet Security Fabric
end
The dynamic firewall address IP is resolved by the SDN connector:
config firewall address
edit "aws-pod"
set type dynamic
set sdn "aws1"
set filter "K8S_PodName=aws-node-g6zhx"
config list
edit "192.168.114.197"
next
end
next
end
GCP Kubernetes (GKE) SDN connector
Google Cloud Platform (GCP) SDN connectors support dynamic address groups based on GCP Kubernetes Engine
(GKE) filters.
To filter out the Kubernetes IP addresses, the following address filters have been introduced:
k8s_cluster Name of Kubernetes cluster.
k8s_nodepool Name of node pool for a Kubernetes cluster.
k8s_namespace Namespace of a Kubernetes service or pod.
k8s_servicename Name of a Kubernetes service.
k8s_nodename Name of a Kubernetes node.
k8s_zone Zone of a Kubernetes node.
k8s_region Region of a Kubernetes node.
k8s_podname Name of a Kubernetes pod.
k8s_label.xxx Name of label of a Kubernetes resource (cluster/service/node/Pod).
FortiOS 6.4.2 Administration Guide 275
Fortinet Inc.
Fortinet Security Fabric
To enable a GCP SDN connector to fetch IP addresses from GKE:
1. Go to Security Fabric > External Connectors, and configure an SDN connector for GCP.
2. Go to Policies & Objects > Addresses and create a dynamic firewall address for the configured SDN connector
using the supported Kubernetes filter.
3. To filter out the Kubernetes IP addresses, select the address filter or filters. In this example, the GCP SDN
connector will automatically populate and update IP addresses only for instances that belong to the zhm-
kc3 cluster:
4. Configure the rest of the settings, then click OK.
The dynamic firewall address IP is resolved by the SDN connector.
FortiOS 6.4.2 Administration Guide 276
Fortinet Inc.
Fortinet Security Fabric
To configure a GCP Kubernetes SDN connector through the CLI:
1. Configure an SDN connector for Kubernetes:
config system sdn-connector
edit "gcp1"
set type gcp
set gcp-project "dev-project-001-166400"
set service-account "[email protected]"
set update-interval 30
next
end
2. Create a dynamic firewall address for the SDN connector with a supported Kubernetes filter:
config firewall address
edit "gcp-k8s-cluster"
set type dynamic
set sdn "gcp1"
set filter "K8S_Cluster=zhm-kc3"
next
end
The dynamic firewall address IP is resolved by the SDN connector:
config firewall address
edit "gcp-k8s-cluster"
set type dynamic
set sdn "gcp1"
set filter "K8S_Cluster=zhm-kc3"
config list
edit "10.0.2.4"
next
edit "10.0.2.7"
next
edit "10.28.0.13"
next
end
FortiOS 6.4.2 Administration Guide 277
Fortinet Inc.
Fortinet Security Fabric
next
end
Azure Kubernetes (AKS) SDN connector
Azure SDN connectors support dynamic address groups based on Azure Kubernetes (AKS) filters.
To filter out the Kubernetes IP addresses, the following address filters have been introduced:
k8s_cluster Kubernetes cluster name.
k8s_namespace Namespace of a Kubernetes service or pod.
k8s_svcname Kubernetes service name.
k8s_nodename Kubernetes node name.
k8s_region Kubernetes node region.
k8s_podname Kubernetes pod name.
k8s_label.xxx Name of label of a Kubernetes resource (cluster/service/node/Pod).
To enable an Azure SDN connector to fetch IP addresses from Azure Kubernetes:
1. Configure the Azure SDN connector:
a. Go to Security Fabric > External Connectors.
b. Click Create New, and select Azure.
c. Configure as shown substituting the region, tenant and client IDs, and client secret for your deployment. The
update interval is in seconds.
2. Create a dynamic firewall address for the configured K8S SDN connector:
a. Go to Policy & Objects > Addresses.
b. Click Create New, then select Address.
c. Configure the address as shown, selecting the desired filter in the Filter dropdown list. In this example, the
Azure SDN connector will automatically populate and update IP addresses only for instances that belong to the
FortiOS 6.4.2 Administration Guide 278
Fortinet Inc.
Fortinet Security Fabric
zhmKC cluster:
3. Ensure that the K8S SDN connector resolves dynamic firewall IP addresses:
a. Go to Policy & Objects > Addresses.
b. Hover over the address created in step 2 to see a list of IP addresses for instances that belong to the
zhmKC cluster as configured in step 2:
To configure an Azure Kubernetes SDN connector through the CLI:
1. Configure an SDN connector for Kubernetes:
config system sdn-connector
edit "azure1"
set type azure
set tenant-id "942b80cd-1b14-42a1-8dcf-4b21dece61ba"
set client-id "14dbd5c5-307e-4ea4-8133-68738141feb1"
set client-secret xxxxx
set update-interval 30
next
FortiOS 6.4.2 Administration Guide 279
Fortinet Inc.
Fortinet Security Fabric
end
2. Create a dynamic firewall address for the SDN connector with a supported Kubernetes filter. In this example, the
Azure SDN connector will automatically populate and update IP addresses only for instances that belong to the
zhmKC cluster:
config firewall address
edit "az-k8s-cluster"
set type dynamic
set sdn "azure1"
set filter "K8S_Cluster=zhmKC"
next
end
3. Confirm that the Azure SDN connector resolves dynamic firewall IP addresses using the configured filter:
config firewall address
edit "az-k8s-cluster"
set type dynamic
set sdn "azure1"
set filter "K8S_Cluster=zhmKC"
config list
edit "10.240.0.4"
next
edit "10.240.0.5"
next
edit "10.244.0.10"
next
end
next
end
Oracle Kubernetes (OKE) SDN connector
OCI SDN connectors support dynamic address groups based on Oracle Kubernetes (OKE) filters.
To filter out the Kubernetes IP addresses, the following address filters have been introduced:
k8s_compartment Name of compartment that the Kubernetes cluster created in.
k8s_cluster Name of Kubernetes cluster.
k8s_namespace Namespace of a Kubernetes service or pod.
k8s_servicename Name of a Kubernetes service.
k8s_nodename Name of a Kubernetes node.
k8s_region Region of a Kubernetes node.
k8s_zone Zone of a Kubernetes node.
k8s_podname name of a Kubernetes pod.
k8s_label.xxx Name of label of a Kubernetes resource (cluster/service/node/Pod)
FortiOS 6.4.2 Administration Guide 280
Fortinet Inc.
Fortinet Security Fabric
To enable an OCI SDN connector to fetch IP addresses from Oracle Kubernetes:
1. Configure the OCI SDN connector:
a. Go to Security Fabric > External Connectors.
b. Click Create New, and select Oracle Cloud Infrastructure (OCI).
c. Configure as shown substituting the region, tenant and client IDs, and client secret for your deployment. The
update interval is in seconds.
2. Create dynamic firewall addresses for the configured SDN connector with supported Kubernetes filter:
a. Go to Policy & Objects > Addresses.
b. Click Create New, then select Address.
c. Configure the addresses.
FortiOS 6.4.2 Administration Guide 281
Fortinet Inc.
Fortinet Security Fabric
3. Confirm that the SDN connector resolves dynamic firewall IP addresses:
a. Go to Policy & Objects > Addresses.
b. Hover over the address created in step 2 to see a list of IP addresses for instances:
To configure an SDN connector through the CLI:
1. Configure the OCI SDN connector:
config system sdn-connector
edit "oci1"
set type oci
set tenant-id
"ocid1.tenancy.oc1..aaaaaaaambr3uzztoyhweohbzqqdo775h7d3t54zpmzkp4b2cf35vs5
5cxxx"
set user-id
"ocid1.user.oc1..aaaaaaaaq2lfspeo3uetzbzpiv2pqvzzevozccnys347stwssvizqlatfx
xx"
set compartment-id
"ocid1.compartment.oc1..aaaaaaaaelxxdjazqo7nzczpgypyiqcgkmytjry6nfq5345vw7e
avpwnmxxx"
set oci-region ashburn
set oci-cert "cert-sha2"
set update-interval 30
next
end
2. Create dynamic firewall addresses for the configured SDN connector with supported Kubernetes filter:
config firewall address
edit "k8s_nodename"
set type dynamic
set sdn "oci1"
set filter "K8S_NodeName=129.213.120.172"
next
end
3. Confirm that the SDN connector resolves dynamic firewall IP addresses:
config firewall address
edit "k8s_nodename"
set type dynamic
FortiOS 6.4.2 Administration Guide 282
Fortinet Inc.
Fortinet Security Fabric
set sdn "oci1"
set filter "K8S_NodeName=129.213.120.172"
config list
edit "10.0.32.2"
next
edit "10.244.2.2"
next
edit "10.244.2.3"
next
edit "10.244.2.4"
next
edit "10.244.2.5"
next
end
next
end
Endpoint/Identity connectors
SSO fabric connectors integrate SSO authentication into the network. This allows users to enter their credentials only
once, and have those credentials reused when accessing other network resources through the FortiGate.
The following fabric connectors are available:
l Fortinet single sign-on agent on page 283
l Poll Active Directory server on page 284
l Symantec endpoint connector on page 284
l RADIUS single sign-on agent on page 290
l Exchange Server connector on page 293
Fortinet single sign-on agent
To create an FSSO agent connector in the GUI:
1. Go to Security Fabric > External Connectors.
2. Click Create New.
3. In the Endpoint/Identity section, click FSSO Agent on Windows AD.
4. Fill in the Name, and Primary FSSO Agent server IP address or name and Password.
FortiOS 6.4.2 Administration Guide 283
Fortinet Inc.
Fortinet Security Fabric
5. Optionally, add more FSSO agents by clicking the plus icon.
6. Optionally, enable Trusted SSL certificate and select or import a certificate.
7. Select the User group source:
l Collector Agent: User groups will be pushed to the FortiGate from the collector agent. Click Apply & Refresh to
fetch group filters from the collector agent.
l Local: User groups will be specified in the FortiGate unit's configuration. Select the LDAP server from the list,
then click Edit to select the Users, Groups, and Organizational Units. Optionally, enable Proactively retrieve
from LDAP server and configure the Search filter and Interval.
8. Click OK.
Poll Active Directory server
The FortiGate unit can authenticate users and allow them network access based on groups membership in Windows
Active Directory (AD).
To create an AD server connector in the GUI:
1. Go to Security Fabric > External Connectors.
2. Click Create New.
3. In the Endpoint/Identity section, click Poll Active Directory Server.
4. Fill in the Server IP/Name, User, and Password for the AD server.
5. Select the LDAP server from the list.
6. If necessary, disable Enable Polling. This can be used to temporarily stop the FortiGate from polling security event
logs on the Windows logon server, for troubleshooting purposes.
7. Click OK.
Symantec endpoint connector
With the Fabric connector for Symantec Endpoint Protection Manager (SEPM), you can use the client IP information
from SEPM to assign to dynamic IP addresses on FortiOS.
When communication between FortiGate and SEPM is established, FortiGate polls every minute for updates via TLS
over port 8446. You can use the CLI to change the default one minute polling interval.
For example, you can create a dynamic Fabric Connector IP address subtype and use it in firewall policies as the source
address. The dynamic IP address contains all IP addresses sent by SEPM.
FortiOS 6.4.2 Administration Guide 284
Fortinet Inc.
Fortinet Security Fabric
This example shows a dynamic IP address with SEPM and one client PC managed by SEPM using FortiGate as the
default gateway.
To configure SEPM on a managed client PC:
1. In SEPM, create client packages for client hosts and group them into SEPM groups.
You can install packages locally on clients or download them directly from SEPM.
2. When a package is installed on the client host, the host is considered managed by SEPM.
Even if the host has multiple interfaces, only one IP per host is displayed.
To configure Symantec endpoint connector on FortiGate in the GUI:
1. Go to Security Fabric > External Connectors and click Create New:
a. In the Endpoint/Identity section, click Symantec Endpoint Protection.
b. Fill in the Name, and set the Status and Update Interval.
c. Set Server to the SEPM IP address.
d. Enter the Username and Password for the server.
FortiOS 6.4.2 Administration Guide 285
Fortinet Inc.
Fortinet Security Fabric
e. To limit the domain or group that is monitored, enter them in the requisite fields.
f. Click OK.
When the connection is established, you can see a green up arrow in the bottom right of the card. You might
need to refresh your browser to see the established connection.
2. Go to Policy & Objects > Addresses and click Create New > Address:
a. Fill in the address Name.
b. Set Type to Dynamic.
c. Set Sub Type to Fabric Connector Address.
d. Set SDN Connector to the fabric connector that you just created.
e. Add Filters as needed.
f. Click OK.
Filter options are only available for active computers that are configured and registered
in SEPM. Free-form filters can be created manually by clicking Create and entering the
filter, in the format: filter_type=value.
Possible manual filter types are: GroupName, GroupID, ComputerName,
ComputerUUID, and OSName. For example: GroupName=MyGroup.
3. Go to Policy & Objects > Addresses and hover the cursor over the name of the new address to see the resolved IP
addresses of the host.
FortiOS 6.4.2 Administration Guide 286
Fortinet Inc.
Fortinet Security Fabric
4. Go to Policy & Objects > Firewall Policy, click Create New, and add a policy that uses the dynamic IP address.
To verify the configuration:
1. On the client PC, check that it is managed by SEPM to access the Internet.
FortiOS 6.4.2 Administration Guide 287
Fortinet Inc.
Fortinet Security Fabric
2. On the FortiGate, you can check in Dashboard > FortiView Sources and Log & Report > Forward Traffic.
Because this traffic is not authenticated traffic but is based on source IP address only, it is
not shown in the GUI firewall monitor or in the diagnose firewall auth list CLI
command.
To configure Symantec endpoint connector on FortiGate in the CLI:
1. Create the fabric connector:
config system sdn-connector
edit "sepm-217"
set type sepm
set server "172.18.60.217"
set username "admin"
set password **********
set status enable
next
end
2. Create the dynamic IP address:
config firewall address
edit "sepm-ip"
set type dynamic
set sdn "sepm-217"
set filter "ComputerName=win10-1"
config list
edit "10.1.100.187"
next
edit "10.6.30.187"
next
FortiOS 6.4.2 Administration Guide 288
Fortinet Inc.
Fortinet Security Fabric
edit "172.16.200.187"
next
end
next
end
3. Add the dynamic IP address to the firewall policy:
config firewall policy
edit 1
set name "pol1"
set srcintf "port2"
set dstintf "port1"
set srcaddr "sepm-ip"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set utm-status enable
set ssl-ssh-profile "certificate-inspection"
set av-profile "default"
set logtraffic all
set fsso disable
set nat enable
next
end
To troubleshoot Symantec SD connector in the CLI:
# diagnose debug application sepmd -1
Output is sent every minute (default). All IPv4 learned from SEPM. IPv6 also sent but not
yet supported.
2019-09-09 12:01:09 sepmd sdn connector sepm-217 start updating IP addresses
2019-09-09 12:01:09 sepmd checking firewall address object sepm-ip, vd 0
2019-09-09 12:01:09 sepmd sdn connector sepm-217 finish updating IP addresses
2019-09-09 12:01:09 sepmd reap child pid: 18079
2019-09-09 12:02:09 sepmd sdn connector sepm-217 prepare to update
2019-09-09 12:02:09 sepmd sdn connector sepm-217 start updating
2019-09-09 12:02:09 sepm-217 sdn connector will retrieve token after 9526 secs
2019-09-09 12:02:09 sym_new_ip_addr ComputerName win10-1
ComputerUuid AC894D56-BD86-A786-7DDB-7FD98B718AE0, OsName Windows 10
IP 172.16.200.187
GroupName My Company\Windows-desktops, GroupId E61FDEA2AC10C80E46D0B31BB58D7CB3
DomainName Default, DomainId 6C507580AC10C80E5F3CAED5B1711A8E
2019-09-09 12:02:09 sym_new_ip_addr ComputerName win10-1
ComputerUuid AC894D56-BD86-A786-7DDB-7FD98B718AE0, OsName Windows 10
IP 10.6.30.187
GroupName My Company\Windows-desktops, GroupId E61FDEA2AC10C80E46D0B31BB58D7CB3
DomainName Default, DomainId 6C507580AC10C80E5F3CAED5B1711A8E
2019-09-09 12:02:09 sym_new_ip_addr ComputerName win10-1
ComputerUuid AC894D56-BD86-A786-7DDB-7FD98B718AE0, OsName Windows 10
IP 10.1.100.187
GroupName My Company\Windows-desktops, GroupId E61FDEA2AC10C80E46D0B31BB58D7CB3
DomainName Default, DomainId 6C507580AC10C80E5F3CAED5B1711A8E
2019-09-09 12:02:09 2001:0000:0000:0000:0000:0000:0000:0187 is not in IPv4 presentation
FortiOS 6.4.2 Administration Guide 289
Fortinet Inc.
Fortinet Security Fabric
format
2019-09-09 12:02:09 sepmd sdn connector sepm-217 start updating IP addresses
2019-09-09 12:02:09 sepmd checking firewall address object sepm-ip, vd 0
2019-09-09 12:02:09 sepmd sdn connector sepm-217 finish updating IP addresses
2019-09-09 12:02:09 sepmd reap child pid: 18089
2019-09-09 12:03:09 sepmd sdn connector sepm-217 prepare to update
2019-09-09 12:03:09 sepmd sdn connector sepm-217 start updating
2019-09-09 12:03:09 sepm-217 sdn connector will retrieve token after 9466 secs
2019-09-09 12:03:09 sym_new_ip_addr ComputerName win10-1
ComputerUuid AC894D56-BD86-A786-7DDB-7FD98B718AE0, OsName Windows 10
IP 172.16.200.187
GroupName My Company\Windows-desktops, GroupId E61FDEA2AC10C80E46D0B31BB58D7CB3
DomainName Default, DomainId 6C507580AC10C80E5F3CAED5B1711A8E
2019-09-09 12:03:09 sym_new_ip_addr ComputerName win10-1
ComputerUuid AC894D56-BD86-A786-7DDB-7FD98B718AE0, OsName Windows 10
IP 10.6.30.187
GroupName My Company\Windows-desktops, GroupId E61FDEA2AC10C80E46D0B31BB58D7CB3
DomainName Default, DomainId 6C507580AC10C80E5F3CAED5B1711A8E
2019-09-09 12:03:09 sym_new_ip_addr ComputerName win10-1
ComputerUuid AC894D56-BD86-A786-7DDB-7FD98B718AE0, OsName Windows 10
IP 10.1.100.187
GroupName My Company\Windows-desktops, GroupId E61FDEA2AC10C80E46D0B31BB58D7CB3
DomainName Default, DomainId 6C507580AC10C80E5F3CAED5B1711A8E
2019-09-09 12:03:09 2001:0000:0000:0000:0000:0000:0000:0187 is not in IPv4 presentation
format
To list the SEPM daemon SDN connectors:
# diagnose test application sepmd 1
sepm SDN connector list:
name: sepm-217, status: enabled, updater_interval: 60
To list the SEPM daemon SDN filters:
# diagnose test application sepmd 2
sepm SDN connector sepm-217 filter list:
name: sepm-ip, vd 0, filter 'ComputerName=win10-1'
RADIUS single sign-on agent
With RADIUS single sign-on (RSSO), a FortiGate can authenticate users who have authenticated on a remote RADIUS
server. Based on which user group the user belongs to, the security policy applies the appropriate UTM profiles.
The FortiGate does not interact with the remote RADIUS server; it only monitors RADIUS accounting records that the
server forwards (originating from the RADIUS client). These records include the user IP address and user group. The
remote RADIUS server sends the following accounting messages to the FortiGate:
Message Action
Start If the information in the start message matches the RSSO configuration on the
FortiGate, the user is added to the local list of authenticated firewall users.
FortiOS 6.4.2 Administration Guide 290
Fortinet Inc.
Fortinet Security Fabric
Message Action
Stop The user is removed from the local list of authenticated firewall users because the
user session no longer exists on the RADIUS server.
You can configure an RSSO agent connector using the FortiOSGUI; however, in most cases, you will need to use the
CLI. There are some default options you may need to modify, which can only be done in the CLI.
To configure an RSSO agent connector:
1. Create the new connector:
a. Go to Security Fabric > External Connectors.
b. Click Create New.
c. In the Endpoint/Identity section, click RADIUS Single Sign-On Agent. The New Fabric Connector pane opens.
d. Enter the connector name.
e. Enable Use RADIUS Shared Secret.
The value entered in Use RADIUS Shared Secret must be identical to what the remote
RADIUS server uses to authenticate when it sends RADIUS accounting messages to
the FortiGate.
f. Enable Send RADIUS Responses.
You should enable Send RADIUS Responses because some RADIUS servers
continue to send the same RADIUS accounting message several times if there is no
response.
g. Click OK.
2. Edit the network interface:
a. Go to Network > Interfaces.
b. Double-click the interface that will receive the RADIUS accounting messages. The Edit Interface pane opens.
c. In the Administrative Access section, select the RADIUS Accounting checkbox. This will open listening for port
1813 on this interface. The FortiGate will then be ready to receive RADIUS accounting messages.
d. Click OK.
3. Create a local RSSO user group:
a. Go to User & Authentication > User Groups.
b. Click Create New.
c. Enter the group name.
FortiOS 6.4.2 Administration Guide 291
Fortinet Inc.
Fortinet Security Fabric
d. For the Type field, click RADIUS Single-Sign-ON (RSSO).
e. Enter a value for RADIUS Attribute Value.
This value by default is the class attribute. The FortiGate uses the content of this attribute in RADIUS
accounting start messages to map a user to a FortiGate group, which then can be used in firewall policies.
In this example configuration, the FortiGate will only add a remote RADIUS user to the local firewall user list if
the class attribute in the RADIUS accounting START message contains the value group1.
If your users are in multiple groups, you will need to add multiple local RSSO user
group.
If the RADIUS attribute value used to map users to a local RSSO group is different than
the RADIUS attribute in the RADIUS accounting messages forwarded by the server,
you must change it in the CLI.
f. Click OK.
4. Edit the local RSSO agent to modify default options using the CLI.
For example, the default value for rsso-endpoint-attribute might work in common remote access scenarios
where users are identified by their unique Calling-Station-Id, but in other scenarios the user name might be in
a different attribute.
config user radius
edit "Local RSSO Agent"
set rsso-endpoint-attribute <attribute>
set sso-attribute <attribute>
next
end
5. Add the local RSSO user group to a firewall policy.
Verifying the RSSO configuration
Verification requires a working remote RADIUS server configured for RADIUS accounting forwarding and wireless or
wired clients that use RADIUS for user authentication.
For a quick test, you can use one of the publicly available RADIUS test tools to send RADIUS accounting start and stop
messages to the FortiGate. You can also use radclient.
To verify the RSSO configuration:
1. In radclient, enter the RADIUS attributes. These attributes are then executed with the FortiGate IP parameters
(sends accounting messages to port 1813) and shared password you configured. -x is used for verbose output:
FortiOS 6.4.2 Administration Guide 292
Fortinet Inc.
Fortinet Security Fabric
root@ControlPC:~# echo "Acct-Status-Type =Start,Framed-Ip-Address=10.1.100.185,User-
Name=test2,Acct-Session-Id=0211a4ef,Class=group1,Calling-Station-Id=00-0c-29-44-BE-B8" |
radclient -x 10.1.100.1 acct 123456
Sending Accounting-Request of id 180 to 10.1.100.1 port 1813
Acct-Status-Type = Start
Framed-IP-Address = 10.1.100.185
User-Name = "test2"
Acct-Session-Id = "0211a4ef"
Class = 0x67726f757031
Calling-Station-Id = "00-0c-29-44-BE-B8"
rad_recv: Accounting-Response packet from host 10.1.100.1 port 1813, id=180, length=20
root@ControlPC:~#
2. Verify that the user is in the local firewall user list with the correct type (rsso) and local firewall group (rsso-
group1):
# diagnose firewall auth l
10.1.100.185, test2
type: rsso, id: 0, duration: 5, idled: 5
flag(10): radius
server: vdom1
packets: in 0 out 0, bytes: in 0 out 0
group_id: 3
group_name: rsso-group-1
----- 1 listed, 0 filtered ------
Exchange Server connector
FortiGate can collect additional information about authenticated users from corporate Microsoft Exchange Servers. After
a user logs in, the additional information can be viewed in various parts of the GUI.
The Exchange connector must be mapped to the LDAP server that is used for authentication.
The following attributes are retrieved:
USER_INFO_FULL_NAME USER_INFO_COMPANY USER_INFO_CITY
USER_INFO_FIRST_NAME USER_INFO_DEPARTMENT USER_INFO_STATE
USER_INFO_LAST_NAME USER_INFO_GROUP USER_INFO_POSTAL_CODE
USER_INFO_LOGON_NAME USER_INFO_TITLE USER_INFO_COUNTRY
USER_INFO_TELEPHONE USER_INFO_MANAGER USER_INFO_ACCOUNT_EXPIRES
USER_INFO_EMAIL USER_INFO_STREET
USER_INFO_USER_PHOTO USER_INFO_POST_OFFICE_BOX
Kerberos Key Distribution Center (KDC) automatic discovery is enabled by default. The FortiGate must be able to use
DNS to resolve the KDC IP addresses, otherwise the FortiGate will be unable to retrieve additional user information from
the Exchange Server.
KDC automatic discovery can be disabled, and one or more internal IP addresses that the FortiGate can reach can be
configured for KDC.
The Override server IP address is enabled when the IP address of the Exchange server cannot be resolved by DNS and
must be entered manually.
FortiOS 6.4.2 Administration Guide 293
Fortinet Inc.
Fortinet Security Fabric
To configure an Exchange connector in the GUI:
1. Go to Security Fabric > External Connectors and click Create New.
2. In the Endpoint/Identity section, click Exchange Server.
3. Set Name to exchange140.
4. Set Exchange account to [email protected].
Administrator is the username, W2K8-SERV1 is the exchange server name, and FORTINET-FSSO.COM is the
domain name.
5. Set Password to the password.
6. Enable Override server IP address and set it to 10.1.100.140.
7. Ensure that Auto-discover KDC is enabled.
If Auto-discover KDC is disabled, one or more KDC IP addresses can be manually entered.
8. Click OK.
To link the connector to the LDAP server in the GUI:
1. Go to User & Authentication > LDAP Servers.
2. Edit an existing LDAP server, or click Create New to create a new one.
3. Enable Exchange server, and select the connector from the list.
4. Configure the remaining settings as required.
5. Click OK.
FortiOS 6.4.2 Administration Guide 294
Fortinet Inc.
Fortinet Security Fabric
To configure an Exchange connector with automatic KDC discovery in the CLI:
config user exchange
edit "exchange140"
set server-name "W2K8-SERV1"
set domain-name "FORTINET-FSSO.COM"
set username "Administrator"
set password **********
set ip 10.1.100.140
set auto-discover-kdc enable
next
end
To link the connector to the LDAP server in the CLI:
config user ldap
edit "openldap"
set server "172.18.60.213"
set cnid "cn"
set dn "dc=fortinet-fsso,dc=com"
set type regular
set username "cn=Manager,dc=fortinet-fsso,dc=com"
set password **********
set group-member-check group-object
set group-object-filter "(&(objectclass=groupofnames)(member=*))"
set member-attr "member"
set user-info-exchange-server "exchange140"
next
end
Verification
To verify that KDC auto-discovery is working:
# diagnose wad debug enable category all
# diagnose wad debug enable level verbose
# diagnose debug enable
# diagnose wad user exchange test-auto-discover
wad_diag_session_acceptor(3115): diag socket 20 accepted.
__wad_fmem_open(557): fmem=0x12490bd8, fmem_name='cmem 9188 bucket', elm_sz=9188, block_
sz=73728, overhead=0, type=advanced
Starting auto-discover test for all configured user-exchanges.
[NOTE]: If any errors are returned, try manually configuring IPs for the reported errors.
wad_rpc_nspi_test_autodiscover_kdc(1835): Starting DNS SRV request for srv(0x7f938e052050)
query(_kerberos._udp.FORTINET-FSSO.COM)
wad_dns_send_srv_query(705): 1:0: sending DNS SRV request for remote peer _kerberos._
udp.FORTINET-FSSO.COM id=0
1: DNS response received for remote host _kerberos._udp.FORTINET-FSSO.COM req-id=0
wad_dns_parse_srv_resp(409): _kerberos._udp.FORTINET-FSSO.COM: resp_type(SUCCESS)
srv[0]: name(w2k12-serv1.fortinet-fsso.com) port(88) priority(0) weight(100)
addr[0]: 10.1.100.131
addr[1]: 10.6.30.131
addr[2]: 172.16.200.131
addr[3]: 2003::131
FortiOS 6.4.2 Administration Guide 295
Fortinet Inc.
Fortinet Security Fabric
addr[4]: 2001::131
srv[1]: name(fsso-core-DC.Fortinet-FSSO.COM) port(88) priority(0) weight(100)
addr[0]: 10.6.30.16
addr[1]: 172.16.200.16
srv[2]: name(w2k12-serv1.Fortinet-FSSO.COM) port(88) priority(0) weight(100)
addr[0]: 10.1.100.131
addr[1]: 172.16.200.131
addr[2]: 10.6.30.131
addr[3]: 2001::131
addr[4]: 2003::131
wad_rpc_nspi_dns_on_discover_kdc_done(1787): Received response for DNS autodiscover req
(0x7f938dfe8050) query(_kerberos._udp.FORTINET-FSSO.COM) n_rsp(3)
Completed auto-discover test for all configured user-exchanges.
To check the collected information after the user has been authenticated:
1. In the GUI, go to Dashboard > Users & Devices, expand the Firewall Users widget, and hover over the user name.
2. In the CLI, run the following diagnose command:
# diagnose wad user info 20 test1
'username' = 'test1'
'sourceip' = '10.1.100.185'
'vdom' = 'root'
'cn' = 'test1'
'givenName' = 'test1'
'sn' = 'test101'
'userPrincipalName' = '[email protected]'
'telephoneNumber' = '604-123456'
'mail' = '[email protected]'
'thumbnailPhoto' = '/tmp/wad/user_info/76665fff62ffffffffffffffffffff75ff68fffffffffa'
'company' = 'Fortinet'
'department' = 'Release QA'
'memberOf' = 'CN=group321,OU=Testing,DC=Fortinet-FSSO,DC=COM'
'memberOf' = 'CN=g1,OU=Testing,DC=Fortinet-FSSO,DC=COM'
'memberOf' = 'CN=group21,OU=Testing,DC=Fortinet-FSSO,DC=COM'
'memberOf' = 'CN=group1,OU=Testing,DC=Fortinet-FSSO,DC=COM'
'manager' = 'CN=test6,OU=Testing,DC=Fortinet-FSSO,DC=COM'
'streetAddress' = 'One Backend Street 1901'
'l' = 'Burnaby'
'st' = 'BC'
'postalCode' = '4711'
'co' = 'Canada'
'accountExpires' = '9223372036854
If the results are not as expected, verify what information FortiGate can collect from the Exchanger Server:
# diagnose test application wad 2500
# diagnose test application wad 162
Threat feeds
Threat feeds dynamically import an external block lists from an HTTP server in the form of a plain text file. Block lists can
be used to enforce special security requirements, such as long term policies to always block access to certain websites,
FortiOS 6.4.2 Administration Guide 296
Fortinet Inc.
Fortinet Security Fabric
or short term requirements to block access to known compromised locations. The lists are dynamically imported, so that
any changes are immediately imported by FortiOS.
There are four types of threat feeds:
FortiGuard The file contains one URL per line. It is available as a Remote Category in Web Filter profiles,
Category SSL inspection exemptions, and proxy addresses. See Web rating override on page 1164 for
more information.
Example:
http://example/com.url
https://example.com/url
http://example.com:8080/url
IP Address The file contains one IP/IP range/subnet per line. It is available as an External IP Block List in
DNS Filter profiles, and as a Source/Destination in IPv4, IPv6, and proxy policies.
Example:
192.168.2.100
172.200.1.4/16
172.16.1.2/24
172.16.8.1-172.16.8.100
2001:0db8::eade:27ff:fe04:9a01/120
2001:0db8::eade:27ff:fe04:aa01-2001:0db8::eade:27ff:fe04:ab01
Domain Name The file contains one domain per line. Simple wildcards are supported. It is available as a
Remote Category in DNS Filter profiles. See External resources for DNS filter on page 303 for
more information.
Example:
mail.*.example.com
*-special.example.com
www.*example.com
example.com
Malware Hash The file contains one hash per line in the format <hex hash> [optional hash
description]. Each line supports MD5, SHA1, and SHA256 hex hashes. It is automatically
used for virus outbreak prevention on antivirus profiles with external-blocklist enabled.
Note: For optimal performance, do not mix different hashes in the list. Only use one of MD5,
SHA1, or SHA26.
Example:
292b2e6bb027cd4ff4d24e338f5c48de
dda37961870ce079defbf185eeeef905 Trojan-Ransom.Win32.Locky.abfl
3fa86717650a17d075d856a41b3874265f8e9eab Trojan-Ransom.Win32.Locky.abfl
c35f705df9e475305c0984b05991d444450809c35dd1d96106bb8e7128b9082f
Trojan-Ransom.Win32.Locky.abfl
See External malware block list for antivirus on page 1004 for an example.
External resources file format
File format requirements for an external resources file:
FortiOS 6.4.2 Administration Guide 297
Fortinet Inc.
Fortinet Security Fabric
l The file is in plain text format with each URL list, IP address, and domain name occupying one line.
l The file is limited to 10 MB or 128 × 1024 (131072) entries, whichever limit is hit first.
l The entry limit also follows the table size limitation defined by CMDB per model.
l The external resources update period can be set to 1 minute, hourly, daily, weekly, or monthly (43200 min, 30 days).
l The external resources type as category (URL list) and domain (domain name list) share the category number
range 192 to 221 (total of 30 categories).
l There is no duplicated entry validation for the external resources file (entry inside each file or inside different files).
l If the number of entries exceed the limit, a warning is displayed. Additional entries beyond the threshold will not be
loaded.
For domain name list (type = domain):
l Simple wildcards are allowed in the domain name list, for example: *.test.com.
l IDN (international domain name) is supported.
For IP address list (type = address):
l The IP address can be a single IP address, subnet address, or address range. For example, 192.168.1.1,
192.168.10.0/24, or 192.168.100.1-192.168.100.254.
l The address can be an IPv4 or IPv6 address. An IPv6 address does not need to be in [ ] format.
To create a threat feed in the GUI:
1. Go to Security Fabric > External Connectors.
2. Click Create New.
3. In the Thread Feeds section, click on the required feed type.
4. Configure the connector settings:
Name Enter a name for the threat feed connector.
URI of external resource Enter the link to the external resource file. The file should be a plain text file
with one entry on each line.
HTTP basic authentication Enable/disable basic HTTP authentication. When enabled, enter the
username and password in the requisite fields.
Refresh Rate The time interval to refresh the external resource, in minutes (1 - 43200,
default = 5).
Comments Optionally, enter a description of the connector.
Status Enable/disable the connector.
5. Click OK.
To create a threat feed in the CLI:
config system external-resource
edit <name>
set status {enable | disable}
set type {category | address | domain | malware}
set category <integer>
set username <string>
set password <string>
set comments [comments]
FortiOS 6.4.2 Administration Guide 298
Fortinet Inc.
Fortinet Security Fabric
*set resource <resource-uri>
set user-agent <string>
*set refresh-rate <integer>
set source-ip <ip address>
set interface-select-method {auto | sdwan | specify}
next
end
Parameters marked with a * are mandatory and must be filled in. Other parameters either have default values or are
optional.
Update history
To review the update history of a threat feed, go to Security Fabric > External Connectors, select a feed, and click Edit.
The Last Update field shows the date and time that the feed was last updated.
Click View Entries to view the current entries in the list.
External blocklist – Policy
You can use the external blocklist (threat feed) for web filtering, DNS, and in firewall policies.
Sample configuration
In this example, an IP address blocklist connector is created so that it can be used in a firewall policy.
To configure an external block list connector in the GUI:
1. Go to Security Fabric > External Connectors and click Create New.
2. In the Threat Feeds section, click IP Address.
3. Set Name to AWS_IP_Blocklist.
FortiOS 6.4.2 Administration Guide 299
Fortinet Inc.
Fortinet Security Fabric
4. Set the URI of external resource to https://s3.us-east-2.amazonaws.com/ip-blocklist/ip.txt.
5. Configure the remaining settings as required, then click OK.
6. Edit the connector, then click View Entries to view the IP addresses in the feed.
The blocklist can now be used in web filter and DNS profiles, and in firewall policies.
To configure an external block list connector in the CLI:
config system external-resource
edit "AWS_IP_Blocklist"
set status enable
set type address
set username ''
set password ENC
set comments ''
set resource "https://s3.us-east-2.amazonaws.com/ip-blocklist/ip.txt"
set refresh-rate 15
next
end
To apply an external block list to a firewall policy in the CLI:
config firewall policy
edit 1
set name "policyid-1"
set srcintf "wan2"
set dstintf "wan1"
set srcaddr "all"
set dstaddr "AWS_IP_Blocklist"
FortiOS 6.4.2 Administration Guide 300
Fortinet Inc.
Fortinet Security Fabric
set action accept
set schedule "always"
set service "ALL"
set logtraffic all
set auto-asic-offload disable
set nat enable
next
end
External blocklist - Authentication
Thread feed external connectors support username and password authentication.
To enable username and password authentication in a thread feed connector:
1. Go to Security Fabric > External Connectors.
2. Edit an existing Threat Feed or create a new one by selecting Create New.
3. Enable HTTP basic authentication
4. Enter the Username and Password.
5. Click OK.
External blocklist - File hashes
The malware hash threat feed connector supports a list of file hashes that can be used as part of virus outbreak
prevention.
This example retrieves a malware hash from an Amazon S3 bucket, and then enables malware block lists in a antivirus
profile.
To configure a malware hash connector in the GUI:
1. Go to Security Fabric > External Connectors and click Create New.
2. In the Threat Feeds section, click Malware Hash.
3. Set Name to AWS_Malware_Hash.
4. Set the URI of external resource to https://s3.us-west-2.amazonaws.com/malware-hash-feeds/fortinet-malware-
hash-list.
FortiOS 6.4.2 Administration Guide 301
Fortinet Inc.
Fortinet Security Fabric
5. Click OK.
6. Edit the connector, then click View Entries to view the hash list.
7. Go to Security Profiles > AntiVirus and create a new profile, or edit an existing one.
8. Enable Use External Malware Block List.
9. Click Apply.
To configure a malware hash connector in the CLI:
config system external-resource
edit "AWS_Malware_Hash"
set type malware
set resource "https://s3.us-west-2.amazonaws.com/malware-hash-feeds/fortinet-
malware-hash-list"
next
end
config antivirus profile
edit "av-profile"
config outbreak-prevention
set external-blocklist enable
end
next
end
Logs
The filehash and filehashsrc are included in outbreak prevention detection event logs.
This example shows the log generated when a file is detected by external malware hash list outbreak prevention:
FortiOS 6.4.2 Administration Guide 302
Fortinet Inc.
Fortinet Security Fabric
1: date=2018-07-30 time=13:59:41 logid="0207008212" type="utm" subtype="virus"
eventtype="malware-list" level="warning" vd="root" eventtime=1532984381 msg="Blocked by
local malware list." action="blocked" service="HTTP" sessionid=174963 srcip=192.168.101.20
dstip=172.16.67.148 srcport=37045 dstport=80 srcintf="lan" srcintfrole="lan" dstintf="wan1"
dstintfrole="wan" policyid=1 proto=6 direction="incoming" filename="mhash_block.com"
checksum="90f0cb57" quarskip="No-skip" virus="mhash_block.com" dtype="File Hash"
filehash="93bdd30bd381b018b9d1b89e8e6d8753" filehashsrc="test_list"
url="http://172.16.67.148/mhash_block.com" profile="mhash_test" agent="Firefox/43.0"
analyticssubmit="false"
External resources for DNS filter
External resources provides the ability to dynamically import an external block list into an HTTP server. This feature
enables the FortiGate to retrieve a dynamic URL, domain name, IP address, or malware hash list from an external HTTP
server periodically. The FortiGate uses these external resources as the web filter's remote categories, DNS filter's
remote categories, policy address objects, or antivirus profile's malware definitions. If external resources are updated,
FortiGate objects are also updated dynamically.
External resource is divided into four types:
l URL list (type = category)
l Domain name list (type = domain)
l IP address list (type = address)
l Malware hash list (type = malware)
Remote categories and external IP block list
The DNS filter profile can use two types of external resources: domain type (domain name list) and address type (IP
address list).
When a domain type external resource is configured, it is treated as a remote category in the DNS filter profile. If the
domain name in DNS query matches the entry in this external resource file, it is treated as the remote category and
follows the action configured for this category in DNS filter profile.
When an address type external resource is configured, it can be enabled as external-ip-blocklist in DNS filter profile. If a
DNS resolved IP address in DNS response matches the entry in the external-ip-blocklist, this DNS query is blocked by
the DNS filter.
For external resources file format and limits, see External resources file format on page 297.
Configuring external resources in the CLI
In the CLI, you can configure external resources files in an external HTTP server. Under global, configure the external
resources file location and specify the resource type.
To configure external resources:
config system external-resource
edit "Ext-Resource-Type-as-Domain-1"
set type domain
set category 194
set resource "http://172.16.200.66/external-resources/Ext-Resource-Type-as-Domain-
1.txt"
FortiOS 6.4.2 Administration Guide 303
Fortinet Inc.
Fortinet Security Fabric
set refresh-rate 1
next
edit "Ext-Resource-Type-as-Address-1"
set status enable
set type address
set username ''
set password
set comments ''
set resource "http://172.16.200.66/external-resources/Ext-Resource-Type-as-Address-
1.txt"
set refresh-rate 1
next
end
In each VDOM, the domain type external resource can be used in the DNS filter as remote category. In this example, the
domain name list in the Ext-Resource-Type-as-Domain-1.txt file is treated as a remote category (category ID 194). The
IP address list in the Ext-Resource-Type-as-Address-1.txt file can be applied in the DNS filter as an external-ip-
blocklist. If the DNS resolved IP address matches any entry in the list in that file, the DNS query is blocked.
To configure the external IP block list and apply it to a policy:
config dnsfilter profile
edit "default"
set comment "Default dns filtering."
config ftgd-dns
config filters
edit 1
set category 194
set action block
next
edit 2
set category 12
next
edit 3
next
end
end
set block-botnet enable
set external-ip-blocklist "Ext-Resource-Type-as-Address-1"
next
end
config firewall policy
edit 1
set name "DNSFilter"
set srcintf "port10"
set dstintf "port9"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set utm-status enable
set logtraffic all
set dnsfilter-profile "default"
set profile-protocol-options "protocol"
FortiOS 6.4.2 Administration Guide 304
Fortinet Inc.
Fortinet Security Fabric
set ssl-ssh-profile "protocols"
set nat enable
next
end
Configuring external resources in the GUI
To configure, edit, or view the entries for external resources in the GUI:
1. Go to Global > Security Fabric > External Connectors.
2. Click Create New.
3. In the Threat Feeds section, select Domain Name or IP Address.
4. Enter the Resource Name, URL, location of the resource file, resource authentication credentials, and Refresh
Rate.
5. Click OK.
6. Double-click the Threat Feeds Object you just configured to open the Edit page
7. Click View Entries to view the entry list in the external resources file.
FortiOS 6.4.2 Administration Guide 305
Fortinet Inc.
Fortinet Security Fabric
8. Go to VDOM > Security Profiles > DNS Filter and open a DNS filter profile. The configured external resources
displays, and you can apply it in each DNS filter profile (remote category or external IP block lists).
Log sample
Remote categories
Go to VDOM > Log & Report > DNS Query. Some domains that match the remote category list are rated as remote
category, overriding their original domain rating.
FortiOS 6.4.2 Administration Guide 306
Fortinet Inc.
Fortinet Security Fabric
Log example:
1: date=2019-01-18 time=13:49:12 logid="1501054802" type="utm" subtype="dns" eventtype="dns-
response" level="notice" vd="vdom1" eventtime=1547848151 policyid=1 sessionid=82998
srcip=10.1.100.18 srcport=42985 srcintf="port10" srcintfrole="undefined" dstip=172.16.95.16
dstport=53 dstintf="port9" dstintfrole="undefined" proto=17 profile="default" xid=38234
qname="www.example.com" qtype="A" qtypeval=1 qclass="IN" ipaddr="93.184.216.34" msg="Domain
is monitored" action="pass" cat=196 catdesc="Ext-Resource-Type-as-Domain-3"
2: date=2019-01-18 time=13:49:12 logid="1500054000" type="utm" subtype="dns" eventtype="dns-
query" level="information" vd="vdom1" eventtime=1547848151 policyid=1 sessionid=82998
srcip=10.1.100.18 srcport=42985 srcintf="port10" srcintfrole="undefined" dstip=172.16.95.16
dstport=53 dstintf="port9" dstintfrole="undefined" proto=17 profile="default" xid=38234
qname="www.example.com" qtype="A" qtypeval=1 qclass="IN"
External IP block lists
Go to VDOM > Log & Report > DNS Query. If the DNS query resolved IP address matches the entry in the external-
ip-blocklist, the DNS query is blocked.
Log example:
1: date=2019-01-18 time=13:50:53 logid="1501054400" type="utm" subtype="dns" eventtype="dns-
response" level="warning" vd="vdom1" eventtime=1547848253 policyid=1 sessionid=83206
srcip=10.1.100.18 srcport=47281 srcintf="port10" srcintfrole="undefined" dstip=172.16.95.16
dstport=53 dstintf="port9" dstintfrole="undefined" proto=17 profile="default" xid=7501
qname="www.example.com" qtype="A" qtypeval=1 qclass="IN" msg="Domain was blocked because it
is in the domain-filter list" action="redirect" domainfilteridx=0 domainfilterlist="Ext-
Resource-Type-as-Address-1"
2: date=2019-01-18 time=13:50:53 logid="1500054000" type="utm" subtype="dns" eventtype="dns-
query" level="information" vd="vdom1" eventtime=1547848253 policyid=1 sessionid=83206
srcip=10.1.100.18 srcport=47281 srcintf="port10" srcintfrole="undefined" dstip=172.16.95.16
dstport=53 dstintf="port9" dstintfrole="undefined" proto=17 profile="default" xid=7501
qname="www.example.com" qtype="A" qtypeval=1 qclass="IN"
Automation stitches
Automation stitches automate the activities between the different components in the Security Fabric, decreasing the
response times to security events. Events from any source in the Security Fabric can be monitored, and action
responses can be set up to any destination.
FortiOS 6.4.2 Administration Guide 307
Fortinet Inc.
Fortinet Security Fabric
Automation stitches can also be used on FortiGate devices that are not part of a Security
Fabric.
Automation stitches that use cloud-based actions, such as AWS Lambda and Azure Function, have the option to delay
an action after the previous action is completed.
An automation stitch consists of two parts, the trigger and the actions. The trigger is the condition or event on the
FortiGate that activates the action, for example, a specific log, or a failed log in attempt. The action is what the FortiGate
does in response to the trigger.
Diagnose commands are available in the CLI to test, log, and display the history and settings of stitches.
Automation stitches can only be created on the root FortiGate in a Security Fabric.
Creating automation stitches
To create an automation stitch, a trigger event and a response action or actions are selected. Automation stitches can be
tested after they are created.
To create an automation stitch in the GUI:
1. On the root FortiGate, go to Security Fabric > Automation.
2. Click Create New. The New Automation Stitch page opens.
FortiOS 6.4.2 Administration Guide 308
Fortinet Inc.
Fortinet Security Fabric
3. Enter the following information:
Name Enter a name for the automation stitch.
Status Enable/disable the stitch.
FortiGate Select the FortiGate device to apply the automation stitch to, or select All
FortiGates to apply it to all of them.
Trigger Select a trigger.
Action Select and configure one or more actions.
Minimum interval (seconds) Enter a minimum time interval during which notifications for the same trigger
event will not be sent.
After the time interval elapses, an alert is sent that includes the last event since
the time interval elapsed.
4. Click OK.
To create an automation stitch in the CLI:
1. Create an automation trigger:
config system automation-trigger
edit <automation-trigger-name>
set trigger-type {event-based | scheduled}
set event-type <option>
set license-type <option>
set ioc-level {medium | high}
set logid <integer>
set trigger-frequency {hourly | daily | weekly | monthly}
set trigger-weekday <option>
set trigger-day <integer>
set trigger-hour <integer>
set trigger-minute <integer>
set faz-event-severity <string>
set faz-event-tags <string>
next
end
The available options will vary depending on the selected event type.
2. Create an automation action:
config system automation-action
edit <name>
set action-type <option>
set email-to <names>
set email-from <string>
set email-subject <string>
set message <string>
set minimum-interval <integer>
set delay <integer>
set required {enable | disable}
set aws-api-id <string>
set aws-region <string>
set aws-domain <string>
FortiOS 6.4.2 Administration Guide 309
Fortinet Inc.
Fortinet Security Fabric
set aws-api-stage <string>
set aws-api-path <string>
set aws-api-key <string>
set azure-app <string>
set azure-function <string>
set azure-domain <string>
set azure-function-authorization {anonymous | function | admin}
set azure-api-key <string>
set gcp-function-region <string>
set gcp-project <string>
set gcp-function-domain <string>
set gcp-function <string>
set alicloud-account-id <string>
set alicloud-region <string>
set alicloud-function-domain <string>
set alicloud-version <string>
set alicloud-service <string>
set alicloud-function <string>
set alicloud-function-authorization {anonymous | function}
set alicloud-access-key-id <string>
set alicloud-access-key-secret <string>
set protocol {http | https}
set method {post | put | get | patch | delete}
set uri <string>
set http-body <string>
set port <integer>
set headers <header>
set script <string>
set security-tag <string>
set sdn-connector <connector_name>
next
end
Enter edit 0 to get the next available ID.
3. Create an automation destination:
config system automation-destination
edit <name>
set type {fortigate | ha-cluster}
set destination <serial numbers>
set ha-group-id <integer>
next
end
4. Create the automation stitch:
config system automation-stitch
edit <automation-stitch-name>
set status {enable | disable}
set trigger <trigger-name>
set action <action-name>
set destination <serial-number>
FortiOS 6.4.2 Administration Guide 310
Fortinet Inc.
Fortinet Security Fabric
next
end
To test an automation stitch:
In the GUI, go to Security Fabric > Automation, right-click on the automation stitch and select Test Automation Stitch.
In the CLI, enter the following command:
diagnose automation test <stitch-name> <log>
Default automation stitches
The Automation menu contains eight webhook automation stitches, including an Incoming Webhook Quarantine trigger
for API calls to the FortiGate, as well as a predefined License Expired Notification that replaces the existing license
expiry alerts.
The automation stitches are available in new FortiGate installations and after upgrading from previous versions.
The following default stitches are included in the Automation menu:
l Compromised Host Quarantine
l Incoming Webhook quarantine
l HA Failover
l Network Down
l Reboot
l FortiAnalyzer Connection Down
l License Expired Notification
l Security rating Notification
To view the CLI configurations for the new automation stitches, see CLI configuration on page 314. To view the
automation stitches in the GUI, go to Security Fabric > Automation.
FortiOS 6.4.2 Administration Guide 311
Fortinet Inc.
Fortinet Security Fabric
Triggering a stitch example
To trigger an Incoming Webhook Quarantine stitch in the GUI:
1. Create new API user:
a. Go to System > Administrators.
b. Click Create New > REST API Admin.
c. Configure the New REST API Admin settings, and record the API key.
2. Get the sample cURL request:
a. Go to Security Fabric > Automation.
b. Under Incoming Webhook, right-click Incoming Webhook Quarantine, and select Edit.
c. Click Enabled, to enable the rule.
d. In the API admin key field, enter the API key you recorded in the previous step. A Sample cURL request is
created.
e. Copy the Sample cURL request.
3. Execute the request:
a. Edit the sample cURL you recorded in the previous step.
b. Add parameters to the data field ("mac" and "fctuid"), and then execute the request.
FortiOS 6.4.2 Administration Guide 312
Fortinet Inc.
Fortinet Security Fabric
root@pc:~# curl -k -X POST -H 'Authorization: Bearer
cfgtct1mmx3fQxr4khb994p7swdfmk' --data '{ "mac":"0c:0a:00:0c:ce:b0", "fctuid":
"0000BB0B0ABD0D00B0D0A0B0E0F0B00B"}'
https://172.16.116.226/api/v2/monitor/system/automation-
stitch/webhook/Incoming%20Webhook%20Quarantine
{
"http_method":"POST",
"status":"success",
"http_status":200,
"serial":"FGT00E0Q00000000",
"version":"v6.4.0",
"build":1545
Encode spaces in the automation-stitch name with %20. For example,
Incoming%20Webhook%20Quarantine
The automation rule Incoming Webhook Quarantine is triggered. The MAC address is quarantined in FortiGate and
an event log is created. The FortiClient UUID is quarantined by EMS on the server side.
To trigger an Incoming Webhook Quarantine stitch in the CLI:
1. Create new API user and record the API key:
config system api-user
edit "api"
set api-key ENC SH00vqP0GKWKyZNz0FP0/jq00O0Ka/DHVEKdxUi+0kRDNKPpZppnnMk0KeunBI=
set accprofile "api_profile"
set vdom "root"
config trusthost
edit 1
set ipv4-trusthost 10.6.30.0 200.200.200.0
next
end
next
end
FortiOS 6.4.2 Administration Guide 313
Fortinet Inc.
Fortinet Security Fabric
2. Configure the automation stitch:
config system automation-stitch
edit "Incoming Webhook Quarantine"
set status enable
set trigger "Incoming Webhook Quarantine"
set action "Compromised Host Quarantine_quarantine" "Compromised Host Quarantine_
quarantine-forticlient"
next
end
3. Add parameters in the data field ("mac" and "fctuid"), then execute the request on a device:
root@pc56:~# curl -k -X POST -H 'Authorization: Bearer
cfgtct1mmx0fQxr4khb000p70wdfmk' --data '{ "mac":"0c:0a:00:0c:ce:b0", "fctuid":
"3000BB0B0ABD0D00B0D0A0B0E0F0B00B"}'
https://100.10.100.200/api/v2/monitor/system/automation-
stitch/webhook/Incoming%20Webhook%20Quarantine
{
"http_method":"POST",
"status":"success",
"http_status":200,
"serial":"FGT80E0Q00000000",
"version":"v6.4.0",
"build":1545
Encode spaces in the automation-stitch name with %20. For example,
Incoming%20Webhook%20Quarantine
The automation rule Incoming Webhook Quarantine is triggered. The MAC address is quarantined in FortiGate, and
an event log is created. The FortiClient UUID will be quarantined on the EMS server side.
config user quarantine
config targets
edit "0c:0a:00:0c:ce:b0"
config macs
edit 0c:0a:00:0c:ce:b0
set description "Quarantined by automation stitch: Incoming Webhook
Quarantine"
next
end
next
end
end
date=2020-02-14 time=15:37:48 logid="0100046600" type="event" subtype="system"
level="notice" vd="root" eventtime=1581723468644200712 tz="-0800"
logdesc="Automation stitch triggered" stitch="Incoming Webhook Quarantine"
trigger="Incoming Webhook Quarantine" stitchaction="Compromised Host Quarantine_
quarantine,Compromised Host Quarantine_quarantine-forticlient" from="log"
msg="stitch:Incoming Webhook Quarantine is triggered."
CLI configuration
Compromised host
config system automation-action
edit "Compromised Host Quarantine_quarantine"
FortiOS 6.4.2 Administration Guide 314
Fortinet Inc.
Fortinet Security Fabric
set action-type quarantine
set minimum-interval 0
set delay 0
set required disable
next
edit "Compromised Host Quarantine_quarantine-forticlient"
set action-type quarantine-forticlient
set minimum-interval 0
set delay 0
set required disable
next
end
config system automation-trigger
edit "Compromised Host Quarantine"
set trigger-type event-based
set event-type ioc
set ioc-level high
next
end
config system automation-stitch
edit "Compromised Host Quarantine"
set status disable
set trigger "Compromised Host Quarantine"
set action "Compromised Host Quarantine_quarantine" "Compromised Host Quarantine_
quarantine-forticlient"
next
end
FortiAnalyzer connection down
config system automation-action
edit "FortiAnalyzer Connection Down_ios-notification"
set action-type ios-notification
set minimum-interval 0
set delay 0
set required disable
next
end
config system automation-trigger
edit "FortiAnalyzer Connection Down"
set trigger-type event-based
set event-type event-log
set logid 22902
next
end
config system automation-stitch
edit "FortiAnalyzer Connection Down"
set status enable
set trigger "FortiAnalyzer Connection Down"
set action "FortiAnalyzer Connection Down_ios-notification"
next
end
Network down
config system automation-action
edit "Network Down_email"
FortiOS 6.4.2 Administration Guide 315
Fortinet Inc.
Fortinet Security Fabric
set action-type email
set email-from ''
set email-subject "Network Down"
set minimum-interval 0
set delay 0
set required disable
set message "%%log%%"
next
end
config system automation-trigger
edit "Network Down"
set trigger-type event-based
set event-type event-log
set logid 20099
config fields
edit 1
set name "status"
set value "DOWN"
next
end
next
end
config system automation-stitch
edit "Network Down"
set status disable
set trigger "Network Down"
set action "Network Down_email"
next
end
HA failover
config system automation-action
edit "HA Failover_email"
set action-type email
set email-from ''
set email-subject "HA Failover"
set minimum-interval 0
set delay 0
set required disable
set message "%%log%%"
next
end
config system automation-trigger
edit "HA Failover"
set trigger-type event-based
set event-type ha-failover
next
end
config system automation-stitch
edit "HA Failover"
set status disable
set trigger "HA Failover"
set action "HA Failover_email"
next
end
FortiOS 6.4.2 Administration Guide 316
Fortinet Inc.
Fortinet Security Fabric
Incoming Webhook Quarantine
config system automation-action
edit "Compromised Host Quarantine_quarantine"
set action-type quarantine
set minimum-interval 0
set delay 0
set required disable
next
edit "Compromised Host Quarantine_quarantine-forticlient"
set action-type quarantine-forticlient
set minimum-interval 0
set delay 0
set required disable
next
end
config system automation-trigger
edit "Incoming Webhook Call"
set trigger-type event-based
set event-type incoming-webhook
next
end
config system automation-stitch
edit "Incoming Webhook Quarantine"
set status disable
set trigger "Incoming Webhook Call"
set action "Compromised Host Quarantine_quarantine" "Compromised Host Quarantine_
quarantine-forticlient"
next
end
License expired
config system automation-action
edit "License Expired Notification_ios-notification"
set action-type ios-notification
set minimum-interval 0
set delay 0
set required disable
next
end
config system automation-trigger
edit "License Expired Notification"
set trigger-type event-based
set event-type license-near-expiry
set license-type any
next
end
config system automation-stitch
edit "License Expired Notification"
set status enable
set trigger "License Expired Notification"
set action "License Expired Notification_ios-notification"
next
end
FortiOS 6.4.2 Administration Guide 317
Fortinet Inc.
Fortinet Security Fabric
Reboot
config system automation-action
edit "Reboot_email"
set action-type email
set email-from ''
set email-subject "Reboot"
set minimum-interval 0
set delay 0
set required disable
set message "%%log%%"
next
end
config system automation-trigger
edit "Reboot"
set trigger-type event-based
set event-type reboot
next
end
config system automation-stitch
edit "Reboot"
set status disable
set trigger "Reboot"
set action "Reboot_email"
next
end
Security rating
config system automation-action
edit "Security Rating Notification_ios-notification"
set action-type ios-notification
set minimum-interval 0
set delay 0
set required disable
next
end
config system automation-trigger
edit "Security Rating Notification"
set trigger-type event-based
set event-type security-rating-summary
set report-type PostureReport
next
end
config system automation-stitch
edit "Security Rating Notification"
set status enable
set trigger "Security Rating Notification"
set action "Security Rating Notification_ios-notification"
next
end
FortiOS 6.4.2 Administration Guide 318
Fortinet Inc.
Fortinet Security Fabric
Chaining and delaying actions
Automation stitches that use cloud-based or webhook actions have the option to delay an action after the previous action
is completed. The execution of the actions can be delayed by up to 3600 seconds (one hour).
To configure this option in the GUI, select a cloud-based action, then enter the required value, in seconds, in the action
configuration's Delay field.
To configure a delay in the CLI, use the following command:
config system automation-action
edit <name>
set action-type {aws-lambda | azure-function | google-cloud-function | alicloud-
function | webhook}
set required {enable | disable}
set delay <seconds>
next
end
Triggers
The following table outlines the available automation stitch triggers:
Trigger Description
Compromised Host An Indicator of Compromise (IoC) is detected on a host endpoint.
The threat level must be selected and can be Medium or High. If Medium is
selected, both medium and high level threats are included.
Note: Additional actions are available only for Compromised Host triggers:
l Access Layer Quarantine
l Quarantine FortiClient via EMS
l Assign VMware NSX Security Tag
l IP Ban
Security Rating Summary A summary is available for a recently run Security Rating.
Configuration Change A FortiGate configuration change has occurred.
Reboot A FortiGate is rebooting.
Low memory This option is only available in the CLI.
Conserve mode due to low memory. See Execute a CLI script based on CPU and
memory thresholds on page 358 for an example.
High CPU This option is only available in the CLI.
High CPU usage. See Execute a CLI script based on CPU and memory
thresholds on page 358 for an example.
License Expiry A FortiGuard license is expiring.
The license type must be selected. Options include:
l FortiCare Support
l FortiGuard Web Filter
FortiOS 6.4.2 Administration Guide 319
Fortinet Inc.
Fortinet Security Fabric
Trigger Description
l FortiGuard AntiSpam
l FortiGuard AntiVirus
l FortiGuard IPS
l FortiGuard Management Service
l FortiGate Cloud
HA Failover An HA failover is occurring.
AV & IPS DB Update The antivirus and IPS database is updating.
FortiOS Event Log The specified FortiOS log has occurred.
The event must be selected from the event list.
FortiAnalyzer Event Handler The specified FortiAnalyzer event handler has occurred. See FortiAnalyzer event
handler trigger on page 320 for details.
Schedule A scheduled monthly, weekly, daily, or hourly trigger. Set to occur on a specific
minute of an specific hour on a specific day.
FortiGate Cloud-Based IOC IOC detection from the FortiGate Cloud IOC service.
This option requires an IOC license, a web filter license, and FortiCloud logging
must be enabled.
FortiAnalyzer event handler trigger
You can trigger automation stitches based on FortiAnalyzer event handlers. This allows you to define rules based on
complex correlations across devices, log types, frequencies, and other criteria.
To set up a FortiAnalyzer event handler trigger:
1. Configure a FortiGate event handler on the FortiAnalyzer
2. Configure FortiAnalyzer logging on the FortiGate on page 321
3. Configure an automation stitch that is triggered by a FortiAnalyzer event handler on page 321
Configure a FortiGate event handler on the FortiAnalyzer
On the FortiAnalyzer, configure an event handler for the automation stitch. In this example, the event handler is triggered
when an administrator logs in to the FortiGate.
FortiOS 6.4.2 Administration Guide 320
Fortinet Inc.
Fortinet Security Fabric
To configure an event handler on the FortiAnalyzer:
1. Go to Incidents & Events > Handlers > FortiGate Event Handlers.
2. Configure an event handler for the automation stitch.
3. Click OK.
Configure FortiAnalyzer logging on the FortiGate
See Configuring FortiAnalyzer on page 138 for more information.
To configure FortiAnalyzer logging in the GUI:
1. Go to Security Fabric > Fabric Connectors and double-click the FortiAnalyzer Logging card.
2. Click Enabled and configure the settings as needed.
3. Click OK.
To configure FortiAnalyzer logging in the CLI:
config log fortianalyzer setting
set status enable
set server "10.6.30.250"
set serial "FL-4HET318900407"
set upload-option realtime
set reliable enable
end
Configure an automation stitch that is triggered by a FortiAnalyzer event handler
When a FortiAnalyzer event handler is triggered, it sends a notification to the FortiGate automation framework, which
generates a log and triggers the automation stitch.
FortiOS 6.4.2 Administration Guide 321
Fortinet Inc.
Fortinet Security Fabric
To configure an automation stitch that is triggered by a FortiAnalyzer event handler in the GUI:
1. Go to Security Fabric > Automation.
2. Click Create New.
3. In the Trigger section, select FortiAnalyzer Event Handler.
4. Set Event handler name to the event that was created on the FortiAnalyzer.
5. Set the Event severity, and select or create an Event tag.
6. In the Action section, select Email and configure the email recipient and message.
7. Click OK.
To configure an automation stitch that is triggered by a FortiAnalyzer event handler in the CLI:
1. Create an automation action:
config system automation-action
edit "auto-faz-1_email"
set action-type email
set email-to "[email protected]"
set email-subject "CSF stitch alert"
set message "User login FortiGate successfully."
next
end
2. Create an automation trigger:
config system automation-trigger
edit "auto-faz-1"
set event-type faz-event
set faz-event-name "system-log-handler2"
set faz-event-severity "medium"
set faz-event-tags "User login successfully"
next
end
3. Create the automation stitch:
config system automation-stitch
edit "auto-faz-1"
FortiOS 6.4.2 Administration Guide 322
Fortinet Inc.
Fortinet Security Fabric
set trigger "auto-faz-1"
set action "auto-faz-1_email"
next
end
View the trigger event log
To see the trigger event log in the GUI:
1. Log in to the FortiGate.
The FortiAnalyzer sends notification to the FortiGate automation framework, generates an event log on the
FortiGate, and triggers the automation stitch.
2. Go to Log & Report > Events and select System Events.
To see event logs in the CLI:
execute log display
...
date=2019-02-05 time=14:16:17 logid="0100046600" type="event" subtype="system"
level="notice" vd="root" eventtime=1549404977 logdesc="Automation stitch triggered"
stitch="auto-faz-1" trigger="auto-faz-1" from="log" msg="stitch:auto-faz-1 is triggered."
...
Sample email
The email sent by the action will look similar to the following:
Actions
The following table outlines the available automation stitch actions. Multiple actions can be added and reorganized as
needed by dragging and dropping.
FortiOS 6.4.2 Administration Guide 323
Fortinet Inc.
Fortinet Security Fabric
Action Description
Alert Generate a FortiOS dashboard alert.
This option is only available in the CLI.
CLI Script Run one or more CLI scripts. See CLI script action on page 325 for details. See
Execute a CLI script based on CPU and memory thresholds on page 358 for an
example.
Disable SSID Disable the SSID interface.
This option is only available in the CLI.
Email Send a custom email message to the selected recipients. At least one recipient
and an email subject must be specified.
The email body can use parameters from logs or previous action results.
Wrapping the parameter with %% will replace the expression with the JSON value
for the parameter, for example: %%results.source%% is the source property from
the previous action.
FortiExplorer Notification Send push notifications to FortiExplorer.
The FortiGate must be registered to FortiCare on the iOS App that will receive the
notification.
Access Layer Quarantine This option is only available for Compromised Host triggers.
Impose a dynamic quarantine on multiple endpoints based on the access layer.
Quarantine FortiClient via This option is only available for Compromised Host triggers.
EMS Use FortiClient EMS to block all traffic from the source addresses that are flagged
as compromised hosts.
Quarantined devices are flagged on the Security Fabric topology views. Go to the
Dashboard > Users & Devices > Quarantine widget to view and manage
quarantined IP addresses.
Quarantine via FortiNAC This option is only available for Compromised Host and Incoming Webhook
triggers.
Use FortiNAC to quarantine a client PC and disable its MAC address. See
Quarantine via FortiNAC action on page 327 for details.
Assign VMware NSX Security This option is only available for Compromised Host triggers.
Tag If an endpoint instance in a VMware NSX environment is compromised, the
configured security tag is assigned to the compromised endpoint. See Assign
VMware NSX security tag action on page 331 and Assign VMware NSX-T
security tag action on page 334 for details.
IP Ban This option is only available for Compromised Host triggers.
Block all traffic from the source addresses flagged by the IoC.
Go to the Dashboard > Users & Devices > Quarantine widget to view and manage
quarantined IP addresses.
AWS Lambda Send log data to an integrated AWS service. See AWS Lambda action on page
337 for details.
FortiOS 6.4.2 Administration Guide 324
Fortinet Inc.
Fortinet Security Fabric
Action Description
Azure Function Send log data to an Azure function. See Azure Function action on page 339 for
details.
Google Cloud Function Send log data to a Google Cloud function. See Google Cloud Function action on
page 341 for details.
AliCloud Function Send log data to an AliCloud function. See AliCloud Function action on page 343
for details.
Slack Notification Send a notification to a Slack channel. See Slack notification action on page 346
for details.
Webhook Send an HTTP request using a REST callback. See Webhook action on page 350
for details, and Slack integration webhook on page 355 and Microsoft Teams
integration webhook on page 356 for examples.
CLI script action
CLI scripts can be run when an automation stitch is triggered. The scripts can be manually entered, uploaded as a file, or
recorded in the CLI console. The output of the script can be sent as an email action.
In this example, the script sets the idle timeout value to 479 minutes, and sends an email with the script output.
To configure a CLI script automation stitch in the GUI:
1. Go to Security Fabric > Automation.
2. Click Create New.
3. Enter a name for the stitch, and select the FortiGate devices that it will be applied to.
4. Select a trigger, such as Security Rating Summary.
5. Select CLI Script and Email actions.
6. Configure the CLI script:
l To manually enter the script, type it into the Script field.
l To upload a script file, click Upload and locate the file on your management computer.
FortiOS 6.4.2 Administration Guide 325
Fortinet Inc.
Fortinet Security Fabric
l To record the script in the CLI console, click >_Record in CLI console, then enter the CLI commands.
7. Configure the email action.
8. Click OK.
To configure a CLI script automation stitch in the CLI:
1. Create an automation action:
config system automation-action
edit "set admintimeout479"
set action-type cli-script
set minimum-interval 0
set delay 0
set required enable
set script "config system global
set admintimeout 479
end"
next
edit "auto-cli-1_email"
set action-type email
set email-to "[email protected]"
set email-subject "CSF stitch alert"
set message "%%results%%"
set minimum-interval 0
next
end
2. Create an automation trigger:
config system automation-trigger
edit "auto-cli-1"
set trigger-type event-based
set event-type security-rating-summary
next
end
3. Create the automation stitch:
config system automation-stitch
edit "auto-cli-1"
set status enable
FortiOS 6.4.2 Administration Guide 326
Fortinet Inc.
Fortinet Security Fabric
set trigger "auto-cli-1"
set action "set admintimeout479
next
end
Email sample
The email sent by the action will look similar to the following:
Quarantine via FortiNAC action
Users can configure an automation stitch with the Quarantine via FortiNAC action with a Compromised Host or Incoming
Webhook trigger. When the automation is triggered, the client PC will be quarantined and its MAC address is disabled in
the configured FortiNAC.
In this example, the FortiNAC has been configured to join an enabled Security Fabric (see FortiNAC for more
information).
To configure a FortiNAC quarantine automation stitch in the GUI:
1. Configure the automation stitch:
a. Go to Security Fabric > Automation and click Create New.
b. In the Trigger section, select Incoming Webhook.
c. In the Action section, select Quarantine via FortiNAC.
FortiOS 6.4.2 Administration Guide 327
Fortinet Inc.
Fortinet Security Fabric
d. Click OK.
2. Create a new API user and generate the API key:
a. Go to System > Administrators and click Create New > REST API Admin.
b. Configure the settings as needed.
c. Click OK. The New API key window opens.
d. Copy the key to the clipboard and click Close.
e. Click OK.
FortiOS 6.4.2 Administration Guide 328
Fortinet Inc.
Fortinet Security Fabric
3. Add the API key to the automation stitch:
a. Go to Security Fabric > Automation and edit the automation stitch created in step 1.
b. Paste the key in the API admin key field.
c. Click OK.
4. On a Linux PC accessible by the FortiGate, create a cURL request to trigger the automation stitch:
root@pc56:~# curl -k -X POST -H 'Authorization: Bearer ckx7d9xdzzx14Nztd1Ncr701dpwwy9' -
-data '{ "srcip": "1.1.1.1", "mac":"00:0C:29:0B:A6:16", "fctuid":
"A8BA0B12DA694E47BA4ADF24F8358E2F"}'
https://172.17.48.225:4431/api/v2/monitor/system/automation-stitch/webhook/auto_webhook
5. In FortiOS, verify the automation stitch is triggered and the action is executed:
a. Go to Log & Report > Events and select System Events to confirm that the stitch was activated.
b. Go to Security Fabric > Automation to see the last time that the stitch was triggered.
FortiOS 6.4.2 Administration Guide 329
Fortinet Inc.
Fortinet Security Fabric
In FortiNAC, the Host View shows the status of the client PC. It is quarantined and its MAC address is disabled.
To configure a FortiNAC quarantine automation stitch in the CLI:
1. Configure the automation stitch:
config system automation-action
edit "auto_webhook_quarantine-fortinac"
set action-type quarantine-fortinac
next
end
config system automation-trigger
edit "auto_webhook"
set event-type incoming-webhook
next
end
config system automation-stitch
edit "auto_webhook"
set trigger "auto_webhook"
set action "auto_webhook_quarantine-fortinac"
next
end
2. Create a new API user and generate the API key:
config system api-user
edit "g-api-rw-user"
set api-key ENC SH2SHFEtfJQ9OsfH/keh4kdULAp3V4ps7HkxBuDIzpR4Cmsckaa9wJ6kw28dFQ=
set accprofile "super_admin"
set vdom "root"
config trusthost
edit 1
set ipv4-trusthost 10.6.30.0 255.255.255.0
next
end
next
end
FortiOS 6.4.2 Administration Guide 330
Fortinet Inc.
Fortinet Security Fabric
3. On a Linux PC accessible by the FortiGate, create a cURL request to trigger the automation stitch:
root@pc56:~# curl -k -X POST -H 'Authorization: Bearer ckx7d9xdzzx14Nztd1Ncr701dpwwy9' -
-data '{ "srcip": "1.1.1.1", "mac":"00:0C:29:0B:A6:16", "fctuid":
"A8BA0B12DA694E47BA4ADF24F8358E2F"}'
https://172.17.48.225:4431/api/v2/monitor/system/automation-stitch/webhook/auto_webhook
4. In FortiOS, verify the automation stitch is triggered and the action is executed:
# diagnose test application autod 2
csf: enabled root:yes
version:1592949233 sync time:Tue Jun 23 15:03:15 2020
total stitches activated: 1
stitch: auto_webhook
destinations: all
trigger: auto_webhook
(id:15)service=auto_webhook
local hit: 1 relayed to: 0 relayed from: 0
actions:
auto_webhook_quarantine-fortinac type:quarantine-fortinac interval:0
date=2020-06-23 time=15:25:44 logdesc="Internal Message" path="system" name="automation-
stitch" action="webhook" mkey="auto_webhook" srcip="1.1.1.1" mac="00:0C:29:0B:A6:16"
fctuid="A8BA0B12DA694E47BA4ADF24F8358E2F" vdom="root" service="auto_webhook"
date=2020-06-23 time=15:25:44 logid="0100046600" type="event" subtype="system"
level="notice" vd="root" eventtime=1592951144401490054 tz="-0700" logdesc="Automation
stitch triggered" stitch="auto_webhook" trigger="auto_webhook" stitchaction="auto_
webhook_quarantine-fortinac" from="log" msg="stitch:auto_webhook is triggered."
Assign VMware NSX security tag action
If an endpoint instance in a VMware NSX environment is compromised, this action will assign the configured security tag
to the compromised endpoint.
This action is only available when the automation trigger is set to compromised host.
To set up the NSX quarantine action, you need to:
1. Configure a VMware NSX SDN connector
2. Configure an NSX security tag automation stitch
3. Configure FortiAnalyzer logging on the FortiGate
Configure a VMware NSX SDN connector
The FortiGate retrieves security tags from the VMware NSX server through the connector.
To configure a VMware NSX SDN connector in the GUI:
1. Go to Security Fabric > External Connectors.
2. Click Create New.
3. Select VMware NSX.
FortiOS 6.4.2 Administration Guide 331
Fortinet Inc.
Fortinet Security Fabric
4. Configure the settings.
5. Click OK.
To configure a VMware NSX SDN connector in the CLI:
config system sdn-connector
edit "nsx"
set type nsx
set server "172.18.64.32"
set username "admin"
set password xxxxxx
next
end
Configure an NSX security tag automation stitch
Security tags are retrieved from the VMware NSX server through the NSX SDN connector.
To configure an NSX security tag automation stitch in the GUI:
1. Go to Security Fabric > Automation.
2. Click Create New.
3. In the Trigger section, select Compromised Host.
4. In the Action section, select Assign VMware NSX Security Tag.
5. Configure the settings.
6. Click OK.
FortiOS 6.4.2 Administration Guide 332
Fortinet Inc.
Fortinet Security Fabric
To configure an NSX security tag automation stitch in the CLI:
1. Create an automation action:
config system automation-action
edit "pcui-test_quarantine-nsx"
set action-type quarantine-nsx
set security-tag "pcui-tag2"
set sdn-connector "nsx"
next
end
2. Create an automation trigger:
config system automation-trigger
edit "pcui-test"
set ioc-level high
next
end
3. Create the automation stitch:
config system automation-stitch
edit "pcui-test"
set trigger "pcui-test"
set action "pcui-test_quarantine-nsx"
next
end
Configure FortiAnalyzer logging on the FortiGate
The FortiAnalyzer is used to send endpoint compromise notification to the FortiGate.
See Configuring FortiAnalyzer on page 138 for more information.
To configure FortiAnalyzer logging in the GUI:
1. Go to Security Fabric > Fabric Connectors and double-click the FortiAnalyzer Logging card.
2. Click Enabled and configure the settings as needed.
3. Click Apply.
To configure FortiAnalyzer logging in the CLI:
config log fortianalyzer setting
set status enable
set server "172.18.64.234"
set serial "FL-8HFT718900132"
set upload-option realtime
set reliable enable
end
When an endpoint instance is compromised
When an endpoint instance, such as pcui-ubuntu2, in the VMware NSX environment is compromised, the automation
stitch is triggered. The FortiGate then assigns the configured security tag, pcui-tag2 in this example, to the compromised
NSX endpoint instance.
FortiOS 6.4.2 Administration Guide 333
Fortinet Inc.
Fortinet Security Fabric
Assign VMware NSX-T security tag action
VMware NSX SDN connectors' vCenter server and credentials can be configured so the FortiGate resolves NSX-T VMs.
The FortiGate is notified of a compromised host on the NSX-T network by an incoming webhook or other means, such as
FortiGuard IOC. An automation stitch can be configured to process this trigger and action it by assigning a VMware NSX
security tag on the VM instance.
To configure an automation stitch to assign a security tag to NSX-T VMs in the GUI:
1. Configure the NSX SDN connector:
config system sdn-connector
edit "nsx_t25"
set type nsx
set server "172.18.64.205"
set username "admin"
set password xxxxxx
set vcenter-server "172.18.64.201"
set vcenter-username "[email protected]"
set vcenter-password xxxxxx
next
end
2. Configure the automation stitch:
a. Go to Security Fabric > Automation and click Create New.
b. In the Trigger section, select Incoming Webhook.
c. In the Action section, select Assign VMwareNSX Security Tag.
d. Enable Specify NSX server(s) and enter a server.
e. Enter a Security tag.
FortiOS 6.4.2 Administration Guide 334
Fortinet Inc.
Fortinet Security Fabric
f. Click OK.
3. In NSX-T, create a cURL request to trigger the automation stitch on the FortiGate:
root@pc56:/home# curl -k -X POST -H 'Authorization: Bearer
3fdxNG08mgNg0fh4NQ51g1NQ1QHcxx' --data '{ "srcip": "10.1.30.242"}'
https://172.16.116.230/api/v2/monitor/system/automation-stitch/webhook/auto_webhook
{
"http_method":"POST",
"status":"success",
"http_status":200,
"serial":"FGVM08TM20000220",
"version":"v6.4.0",
"build":1608
}
The automation stitch is triggered and the configured tag is added to the NSX-T VM.
FortiOS 6.4.2 Administration Guide 335
Fortinet Inc.
Fortinet Security Fabric
In FortiOS, the Security Fabric > Automation page shows the last trigger time.
To configure an automation stitch to assign a security tag to NSX-T VMs in the CLI:
1. Configure the NSX SDN connector:
config system sdn-connector
edit "nsx_t25"
set type nsx
set server "172.18.64.205"
set username "admin"
set password xxxxxx
set vcenter-server "172.18.64.201"
set vcenter-username "[email protected]"
set vcenter-password xxxxxx
next
end
2. Configure the automation stitch:
config system automation-action
edit "auto_webhook_quarantine-nsx"
set action-type quarantine-nsx
set security-tag "automation_tag"
set sdn-connector "nsx_t25"
next
end
config system automation-trigger
edit "auto_webhook"
set trigger-type event-based
set event-type incoming-webhook
next
end
config system automation-stitch
edit "auto_webhook"
set status enable
set trigger "auto_webhook"
FortiOS 6.4.2 Administration Guide 336
Fortinet Inc.
Fortinet Security Fabric
set action "auto_webhook_quarantine-nsx"
next
end
3. In NSX-T, create a cURL request to trigger the automation stitch on the FortiGate:
root@pc56:/home# curl -k -X POST -H 'Authorization: Bearer
3fdxNG08mgNg0fh4NQ51g1NQ1QHcxx' --data '{ "srcip": "10.1.30.242"}'
https://172.16.116.230/api/v2/monitor/system/automation-stitch/webhook/auto_webhook
{
"http_method":"POST",
"status":"success",
"http_status":200,
"serial":"FGVM08TM20000220",
"version":"v6.4.0",
"build":1608
}
To verify the automation stitch is triggered and the action is executed:
# diagnose test application autod 2
csf: enabled root:yes
version:1586883541 sync time:Tue Apr 14 11:04:05 2020
total stitches activated: 1
stitch: auto_webhook
destinations: all
trigger: auto_webhook
(id:15)service=auto_webhook
local hit: 1 relayed to: 0 relayed from: 0
actions:
auto_webhook_quarantine-nsx type:quarantine-nsx interval:0
security tag:automation_tag
sdn connector:
nsx_t25;
AWS Lambda action
AWS Lambda functions can be called when an automation stitch is triggered.
To configure an AWS Lambda function automation stitch in the GUI:
1. Go to Security Fabric > Automation.
2. Click Create New.
3. Enter a name for the stitch, and select the FortiGate devices that it will be applied to.
4. Select a trigger, such as Security Rating Summary.
FortiOS 6.4.2 Administration Guide 337
Fortinet Inc.
Fortinet Security Fabric
5. Select AWS Lambda Function and configure its settings.
Name The action name.
Delay The amount of time after the previous action before this action executes, in
seconds (0 - 3600, default = 0).
API gateway The API gateway URL, in the format:
{restapi-id}.execute-api.{region}.{domain}/{stage}/{path}
The CLI must be used to manually enter the individual parameters.
API key The API key configured in your API gateway.
HTTP header The HTTP request header name and value. Multiple headers can be added.
+ Click to add another action.
Actions can be reorganized as needed by dragging and dropping.
Name The action name.
Delay The amount of time after the previous action before this action executes, in
seconds (0 - 3600, default = 0).
6. Click OK.
To configure an AWS Lambda function automation stitch in the CLI:
1. Create an automation action:
config system automation-action
edit "aws-action-1"
set action-type aws-lambda
set aws-api-id "0100000000"
set aws-region "us-east-2"
set aws-api-stage "default"
set aws-api-path "xxxxx-autobatoon-XXX-lambdaXXX"
set aws-api-key *************
next
end
FortiOS 6.4.2 Administration Guide 338
Fortinet Inc.
Fortinet Security Fabric
2. Create an automation trigger:
config system automation-trigger
edit "auto-aws"
set event-type security-rating-summary
next
end
3. Create the automation stitch:
config system automation-stitch
edit "auto-aws"
set trigger "auto-aws"
set action "aws-action-1"
next
end
When the automation stitch is triggered, the FortiGate shows the stitch trigger time:
In AWS, the log shows that the function was called, executed, and finished.
Azure Function action
Azure functions can be called when an automation stitch is triggered.
To configure an Azure function automation stitch in the GUI:
1. Go to Security Fabric > Automation.
2. Click Create New.
3. Enter a name for the stitch, and select the FortiGate devices that it will be applied to.
4. Select a trigger, such as Security Rating Summary.
FortiOS 6.4.2 Administration Guide 339
Fortinet Inc.
Fortinet Security Fabric
5. Select Azure Function and configure its settings.
Name The action name.
Delay The amount of time after the previous action before this action executes, in
seconds (0 - 3600, default = 0).
API gateway The API gateway URL, in the format:
{application}.{domain}/api/{function}
The CLI must be used to manually enter the individual parameters.
Authorization The authorization level: Anonymous, Function, or Admin.
API key The API key configured in your API gateway.
This options is only available when Authorization is not Anonymous.
HTTP header The HTTP request header name and value. Multiple headers can be added.
+ Click to add another action.
Actions can be reorganized as needed by dragging and dropping.
6. Click OK.
To configure an Azure function automation stitch in the CLI:
1. Create an automation action:
config system automation-action
edit "azure_function"
set action-type azure-function
set azure-app "xxxxx00-no-delete-xxxx"
set azure-function "headersResponse"
set azure-function-authorization function
set azure-api-key **********
set headers "header1:value1" "header2:value2"
next
end
FortiOS 6.4.2 Administration Guide 340
Fortinet Inc.
Fortinet Security Fabric
2. Create an automation trigger:
config system automation-trigger
edit "auto-azure"
set event-type security-rating-summary
next
end
3. Create the automation stitch:
config system automation-stitch
edit "auto-azure"
set trigger "auto-azure"
set action "azure_function"
next
end
When the automation stitch is triggered, the FortiGate shows the stitch trigger time:
In Azure, the function log shows that the function was called, executed, and finished:
Google Cloud Function action
Google Cloud functions can be called when an automation stitch is triggered.
FortiOS 6.4.2 Administration Guide 341
Fortinet Inc.
Fortinet Security Fabric
To configure a Google Cloud function automation stitch in the GUI:
1. Go to Security Fabric > Automation.
2. Click Create New.
3. Enter a name for the stitch, and select the FortiGate devices that it will be applied to.
4. Select a trigger, such as Security Rating Summary.
5. Select Google Cloud Function and configure its settings.
Name The action name.
Delay The amount of time after the previous action before this action executes, in
seconds (0 - 3600, default = 0).
API gateway The API gateway URL, in the format:
{region}-{project}{domain}/{function}
The CLI must be used to manually enter the individual parameters.
HTTP header The HTTP request header name and value. Multiple headers can be added.
+ Click to add another action.
Actions can be reorganized as needed by dragging and dropping.
6. Click OK.
To configure a Google Cloud function automation stitch in the CLI:
1. Create an automation action:
config system automation-action
edit "google-echo"
set action-type google-cloud-function
set gcp-function-region "us-central1"
set gcp-project "xxx-xxxxxxx-000-000000"
set gcp-function-domain "cloudfunctions.net"
set gcp-function "xxxx-echo"
set headers "echo-header:echo-value"
next
end
FortiOS 6.4.2 Administration Guide 342
Fortinet Inc.
Fortinet Security Fabric
2. Create an automation trigger:
config system automation-trigger
edit "auto-google1"
set event-type security-rating-summary
next
end
3. Create the automation stitch:
config system automation-stitch
edit "auto-google1"
set trigger "auto-google1"
set action "google-echo"
next
end
When the automation stitch is triggered, the FortiGate shows the stitch trigger time:
In Google Cloud, go to Logs to see the function log showing that the configured function was called, executed, and
finished:
AliCloud Function action
AliCloud functions can be called when an automation stitch is triggered.
FortiOS 6.4.2 Administration Guide 343
Fortinet Inc.
Fortinet Security Fabric
To configure an AliCloud function automation stitch in the GUI:
1. Go to Security Fabric > Automation.
2. Click Create New.
3. Enter a name for the stitch, and select the FortiGate devices that it will be applied to.
4. Select a trigger, such as Security Rating Summary.
5. Select AliCloud Function and configure its settings.
Name The action name.
Delay The amount of time after the previous action before this action executes, in
seconds (0 - 3600, default = 0).
HTTP URL The HTTP URL, in the format:
{account id}.{region}.{domain}/{version}/proxy/{service}/
{function}
The CLI must be used to manually enter the individual parameters.
Authorization The authorization level: Anonymous, or Function.
AccessKey ID The access key ID
This options is only available when Authorization is Function.
AccessKey Secret The access key secret.
This options is only available when Authorization is Function.
HTTP header The HTTP request header name and value. Multiple headers can be added.
+ Click to add another action.
Actions can be reorganized as needed by dragging and dropping.
6. Click OK.
FortiOS 6.4.2 Administration Guide 344
Fortinet Inc.
Fortinet Security Fabric
To configure an AliCloud function automation stitch in the CLI:
1. Create an automation action:
config system automation-action
edit "Ali-Action-1"
set action-type alicloud-function
set alicloud-account-id "0000000000000000"
set alicloud-region "us-east-1"
set alicloud-version "2099-99-99"
set alicloud-service "test-function"
set alicloud-function "echoBodyAuth"
set alicloud-function-authorization function
set alicloud-access-key-id "XXXXXxXXXXxxxxxx"
set alicloud-access-key-secret xxxxxx
next
end
2. Create an automation trigger:
config system automation-trigger
edit "auto-ali"
set event-type security-rating-summary
next
end
3. Create the automation stitch:
config system automation-stitch
edit "auto-ali"
set trigger "auto-ali"
set action "Ali-Action-1"
next
end
When the automation stitch is triggered, the FortiGate shows the stitch trigger time:
In AliCloud, the function log shows that the function was called, executed, and finished:
FortiOS 6.4.2 Administration Guide 345
Fortinet Inc.
Fortinet Security Fabric
Slack notification action
To configure the automation stitch, create an incoming webhook in Slack, and then enter the webhook URL in the
corresponding field of the notification action in FortiGate.
To create an incoming webhook in Slack:
1. Go to the Slack website, and create a workspace.
2. Create a Slack application for the workspace.
3. Add an Incoming Webhook to a channel in the workspace.
FortiOS 6.4.2 Administration Guide 346
Fortinet Inc.
Fortinet Security Fabric
4. Activate the Incoming Webhook, and record the Webhook URL.
For information about using incoming webhooks in Slack, see https://api.slack.com/incoming-webhooks.
To configure a Slack notification in the GUI:
1. Go to Security Fabric > Automation.
2. Choose an automation stitch, and click Edit.
FortiOS 6.4.2 Administration Guide 347
Fortinet Inc.
Fortinet Security Fabric
3. Select Slack Notification, and configure the notification settings.
Name Enter a name for the notification.
Delay Enter the number of seconds to delay the notification after the previous action is triggered.
URL Enter the Webhook URL you recorded when you created the incoming webhook in Slack.
Message Take one of the following actions:
l Configure the message parameters. Click % to view a description of the available
parameters.
l Enter the message to display in the Slack channel.
4. (Optional) Click the plus (+) sign to add another action.
5. Click OK.
6. Run the automation stitch to trigger the action.
To configure a Slack notification in the CLI:
1. Add the webhook URL the Slack notification action:
config system automation-action
edit "slack1"
set action-type slack-notification
set minimum-interval 0
set delay 0
set required disable
set message "This is test for slack notification."
set uri "hooks.slack.com/services/xxxxxxxxx/xxxxxxxxx/xxxxxxxxxxxxxxxxxxxxxxxx"
next
edit "slack2"
set action-type slack-notification
FortiOS 6.4.2 Administration Guide 348
Fortinet Inc.
Fortinet Security Fabric
set minimum-interval 0
set delay 90
set required disable
set message "%%log%%"
set uri "hooks.slack.com/services/xxxxxxxxx/xxxxxxxxx/xxxxxxxxxxxxxxxxxxxxxxxx"
next
end
2. Create the trigger for the notification:
config system automation-trigger
edit "auto-rating"
set trigger-type event-based
set event-type security-rating-summary
next
end
3. Configure the action for the trigger:
config system automation-stitch
edit "auto-rating"
set status enable
set trigger "auto-rating"
set action "slack1" "slack2"
next
end
4. Trigger the notification.
The notification action is triggered in FortiGate.
The message you entered in the automation stitch is delivered to the Slack channel.
FortiOS 6.4.2 Administration Guide 349
Fortinet Inc.
Fortinet Security Fabric
Webhook action
The webhook automation stitch action makes HTTP and HTTPS requests to a specified server, with custom headers,
bodies, ports, and methods. It can be used to leverage the ubiquity of HTML requests and APIs to integrate with many
other tools.
The URI and HTTP body can use parameters from logs or previous action results. Wrapping
the parameter with %% will replace the expression with the JSON value for the parameter, for
example: %%results.source%% is the source property from the previous action.
In this example, a specific log message (failed administrator log in attempt) triggers the FortiGate to send the contents of
the log to a server. The server responds with a generic reply. This example assumes that the server is already
configured and able to communicate with the FortiGate.
To configure the webhook automation stitch in the GUI:
1. Go to Security Fabric > Automation.
2. Click Create New.
3. Enter a name for the stitch, and select the FortiGate devices that it will be applied to.
4. Select the trigger FortiOS Event Log.
5. Set Event to Admin login failed.
6. Select Webhook and configure the settings:
Name The action name.
Delay The amount of time after the previous action before this action executes, in
seconds (0 - 3600, default = 0).
FortiOS 6.4.2 Administration Guide 350
Fortinet Inc.
Fortinet Security Fabric
Protocol The request protocol to use: HTTP or HTTPS.
Method The request method: POST, PUT, GET, PATCH, or DELETE.
URI The request API URI.
Port The protocol port.
HTTP body The request body, if required, as a serialized JSON string.
Use the parameter %%log%% to send the contents of the log from the trigger.
HTTP header The HTTP request header name and value.
+ Click to add another action.
Actions can be reorganized as needed by dragging and dropping.
7. Click OK.
To configure the webhook automation stitch in the CLI:
1. Create the automation action:
config system automation-action
edit "Send Log To Server"
set action-type webhook
set uri "172.16.200.44"
set http-body "%%log%%"
set port 80
set headers "Header:1st Action"
next
end
2. Create an automation trigger:
config system automation-trigger
edit "badLogin"
set event-type event-log
set logid 32002
next
end
3. Create the automation stitch:
config system automation-stitch
edit "badLogin"
set trigger "badLogin"
set action "Send Log To Server"
next
end
FortiOS 6.4.2 Administration Guide 351
Fortinet Inc.
Fortinet Security Fabric
To test the automation stitch:
1. Attempt to log in to the FortiGate with an incorrect username or password.
2. On the server, check the log to see that its contents have been sent by the FortiGate.
The body content is replaced with the log of the trigger.
3. On the FortiGate, go to Log & Report > Events and select System Events to confirm that the stitch was activated.
4. Go to Security Fabric > Automation to see the last time that the stitch was triggered.
Diagnose commands
l Enable log dumping:
# diagnose test application autod 1
FortiOS 6.4.2 Administration Guide 352
Fortinet Inc.
Fortinet Security Fabric
autod dumped total:1 logs, num of logids:1
autod log dumping is enabled
vdom:root(0) logid:32002 len:408 log:
date=2019-05-30 time=17:41:03 logid="0100032002" type="event" subtype="system"
level="alert" vd="root" eventtime=1559263263858888451 tz="-0700" logdesc="Admin login
failed" sn="0" user="admin" ui="http(10.6.30.254)" method="http" srcip=10.6.30.254
dstip=10.6.30.5 action="login" status="failed" reason="passwd_invalid"
msg="Administrator admin login failed from http(10.6.30.254) because of invalid
password"
autod log dumping is disabled
autod logs dumping summary:
logid:32002 count:1
autod dumped total:1 logs, num of logids:1
l Show automation settings:
# diagnose test application autod 2
csf: enabled root:yes
total stitches activated: 2
stitch: badLogin
destinations: all
trigger: badLogin
local hit: 6 relayed to: 6 relayed from: 6
actions:
Send Log To Server type:webhook interval:0
delay:0 required:no
proto:0 method:0 port:80
uri: 172.16.200.44
http body: %%log%%
headers:
0. Header:1st Action
l Show automation statistics:
# diagnose test application autod 3
stitch: badLogin
local hit: 1 relayed to: 1 relayed from: 1
last trigger:Wed Jul 10 12:14:14 2019
last relay:Wed Jul 10 12:14:14 2019
actions:
Send Log To Server:
done: 1 relayed to: 1 relayed from: 1
last trigger:Wed Jul 10 12:14:14 2019
last relay:Wed Jul 10 12:14:14 2019
logid2stitch mapping:
id:32002 local hit: 3 relayed to: 3 relayed from: 3
badLogin
FortiOS 6.4.2 Administration Guide 353
Fortinet Inc.
Fortinet Security Fabric
action run cfg&stats:
total:55 cur:0 done:55 drop:0
email:
flags:10
stats: total:4 cur:0 done:4 drop:0
ios-notification:
flags:1
stats: total:0 cur:0 done:0 drop:0
alert:
flags:0
stats: total:0 cur:0 done:0 drop:0
disable-ssid:
flags:7
stats: total:0 cur:0 done:0 drop:0
quarantine:
flags:7
stats: total:0 cur:0 done:0 drop:0
quarantine-forticlient:
flags:4
stats: total:0 cur:0 done:0 drop:0
quarantine-nsx:
flags:4
stats: total:0 cur:0 done:0 drop:0
ban-ip:
flags:7
stats: total:0 cur:0 done:0 drop:0
aws-lambda:
flags:11
stats: total:21 cur:0 done:21 drop:0
webhook:
flags:11
stats: total:6 cur:0 done:6 drop:0
cli-script:
flags:10
stats: total:4 cur:0 done:4 drop:0
azure-function:
flags:11
stats: total:0 cur:0 done:0 drop:0
google-cloud-function:
flags:11
stats: total:0 cur:0 done:0 drop:0
alicloud-function:
flags:11
stats: total:20 cur:0 done:20 drop:0
l Enable debug output and turn on automation debug messages for about 30 minutes:
# diagnose debug enable
# diagnose debug application autod -1
__auto_generate_generic_curl_request()-358: Generating generic automation CURL request
for action (Send Log To Server).
__auto_generate_generic_curl_request()-406: Generic automation CURL request POST data
for action (Send Log To Server):
date=2019-05-30 time=16:44:43 logid="0100032002" type="event" subtype="system"
level="alert" vd="root" eventtime=1559259884209355090 tz="-0700" logdesc="Admin login
failed" sn="0" user="admin" ui="http(10.6.30.254)" method="http" srcip=10.6.30.254
FortiOS 6.4.2 Administration Guide 354
Fortinet Inc.
Fortinet Security Fabric
dstip=10.6.30.5 action="login" status="failed" reason="passwd_invalid"
msg="Administrator admin login failed from http(10.6.30.254) because of invalid
password"
__auto_generic_curl_request_close()-512: Generic CURL request response body from
http://172.16.200.44:
{
"userId": 1,
"id": 1,
"title": "Test Response",
"body": "ABCDEFGHIJKLMNOPQRSTUVWXYZ"
}
Slack integration webhook
A webhook can be created to post messages and notifications to Slack. For information about using incoming webhooks
in Slack, see https://api.slack.com/incoming-webhooks.
In this example, a configuration change triggers the FortiGate to post a message to Slack.
To create a webhook automation stitch for Slack integration in the GUI:
1. Go to Security Fabric > Automation.
2. Click Create New.
3. Enter a name for the stitch.
4. Select the trigger Configuration Change.
5. Select Webhook and configure the settings:
6. Click OK.
FortiOS 6.4.2 Administration Guide 355
Fortinet Inc.
Fortinet Security Fabric
To create a webhook automation stitch for Slack integration in the CLI:
1. Create the automation action:
config system automation-action
edit "send to Slack"
set action-type webhook
set protocol https
set uri "hooks.slack.com/services/XXXXXXXX"
set http-body "{\"channel\": \"#delivery\", \"username\": \"tleela\", \"text\":
\"Configuration changed\", \"icon_emoji\": \":worried:\"}"
set port 443
set headers "Content-type:application/json"
next
end
2. Create the automation trigger:
config system automation-trigger
edit "config change"
set event-type config-change
next
end
3. Create the automation stitch:
config system automation-stitch
edit "Slack"
set trigger "config change"
set action "send to Slack"
next
end
Microsoft Teams integration webhook
A webhook can be created to post messages and notifications to Microsoft Teams.
In this example, a configuration change triggers the FortiGate to post a message to Teams.
To create a webhook automation stitch for Teams integration in the GUI:
1. Create an incoming webhook in Teams. See https://docs.microsoft.com/en-us/microsoftteams/platform/webhooks-
and-connectors/how-to/add-incoming-webhook for information.
2. Go to Security Fabric > Automation.
3. Click Create New.
4. Enter a name for the stitch.
5. Select the trigger Configuration Change.
FortiOS 6.4.2 Administration Guide 356
Fortinet Inc.
Fortinet Security Fabric
6. Select Webhook and configure the settings:
The URI is the URL from the incoming webhook created in Teams. The HTTP body can also contain log
parameters.
7. Click OK.
To create a webhook automation stitch for Teams integration in the CLI:
1. Create an incoming webhook in Teams. See https://docs.microsoft.com/en-us/microsoftteams/platform/webhooks-
and-connectors/how-to/add-incoming-webhook for information.
2. Create the automation action:
config system automation-action
edit "send to Teams"
set action-type webhook
set protocol https
set uri
"outlook.office.com/webhook/XXXXXXXXXXXX/IncomingWebhook/XXXXXXXXXXXX/XXXXXXXXXXXX"
set http-body "{ \"text\": \"<message to send>\" }"
set port 443
set headers "Content-type:application/json"
next
end
3. Create the automation trigger:
config system automation-trigger
edit "Teams"
set event-type config-change
next
end
FortiOS 6.4.2 Administration Guide 357
Fortinet Inc.
Fortinet Security Fabric
4. Create the automation stitch:
config system automation-stitch
edit "Teams"
set trigger "Teams"
set action "send to Teams"
next
end
For information about more advanced messages that can be configured and sent to the
webhook, see https://docs.microsoft.com/en-us/microsoftteams/platform/webhooks-and-
connectors/how-to/connectors-using
Execute a CLI script based on CPU and memory thresholds
Automation stitches can be created to run a CLI script and send an email message when CPU or memory usage
exceeds specified thresholds.
In this example, two automation stitches are created that run a CLI script to collect debug information, and then email the
results of the script to a specified email address when CPU usage threshold is exceeded or memory usage causes the
FortiGate to enter conserve mode.
Automation stitches that use High CPU and Conserve Mode triggers can only be created in the
CLI. Once create, they can be edited in the GUI.
To define CPU and memory usage thresholds:
config system global
set cpu-use-threshold <percent>
set memory-use-threshold-extreme <percent>
set memory-use-threshold-green <percent>
set memory-use-threshold-red <percent>
end
Where:
cpu-use-threshold Threshold at which CPU usage is reported, in percent of total possible CPU
utilization (default = 90).
memory-use-threshold-extreme Threshold at which memory usage is considered extreme, and new sessions are
dropped, in percent of total RAM (default = 95).
memory-use-threshold-green Threshold at which memory usage forces the FortiGate to exit conserve mode, in
percent of total RAM (default = 82).
memory-use-threshold-red Threshold at which memory usage forces the FortiGate to enter conserve mode,
in percent of total RAM (default = 88).
FortiOS 6.4.2 Administration Guide 358
Fortinet Inc.
Fortinet Security Fabric
Configure the automation stitches
High CPU usage stitch
To create an automation stitch for high CPU usage:
1. Create an automation action to run a CLI script:
config system automation-action
edit "high_cpu_debug"
set action-type cli-script
set required enable
set script "diagnose debug cli 8
diagnose debug console timestamp enable
diagnose debug enable
diagnose debug crashlog read
get system performance status
get system session status
diagnose sys session full-stat
diagnose firewall iprope state
diagnose sys flash list
diagnose hardware sysinfo memory
diagnose hardware sysinfo slab
diagnose hardware sysinfo shm
diagnose hardware deviceinfo disk
get system arp
diagnose ip arp list
diagnose ip address list
get router info routing-table all
get router info kernel
diagnose ip rtcache list
diagnose sys top-summary
diagnose sys top 9 99"
next
end
2. Create an automation action to send an email:
config system automation-action
edit "auto_high_cpu_email"
set action-type email
set email-to "[email protected]"
set email-subject "CSF stitch alert: high_cpu"
set message "%%results%%"
next
end
3. Create an automation trigger:
config system automation-trigger
edit "auto_high_cpu"
set event-type high-cpu
next
end
FortiOS 6.4.2 Administration Guide 359
Fortinet Inc.
Fortinet Security Fabric
4. Create an automation stitch:
config system automation-stitch
edit "auto_high_cpu"
set trigger "auto_high_cpu"
set action "high_cpu_debug" "auto_high_cpu_email"
next
end
To edit the automation stitch in the GUI:
1. Go to Security Fabric > Automation.
2. Double click the auto_high_cpu stitch.
3. Edit the stitch as required, then click OK.
High memory usage stitch
To create an automation stitch for high memory usage:
1. Create an automation action to run a CLI script:
config system automation-action
edit "high_memory_debug"
set action-type cli-script
set required enable
set script "diagnose debug cli 8
diagnose debug console timestamp enable
diagnose debug enable
FortiOS 6.4.2 Administration Guide 360
Fortinet Inc.
Fortinet Security Fabric
diagnose debug crashlog read
get system performance status
get system session status
diagnose sys session full-stat
diagnose firewall iprope state
diagnose sys flash list
diagnose hardware sysinfo memory
diagnose hardware sysinfo slab
diagnose hardware sysinfo shm
diagnose hardware deviceinfo disk
get system arp
diagnose ip arp list
diagnose ip address list
get router info routing-table all
get router info kernel
diagnose ip rtcache list
diagnose sys top-summary
diagnose sys top 9 99"
next
end
2. Create an automation action to send an email:
config system automation-action
edit "auto_high_memory_email"
set action-type email
set email-to "[email protected]"
set email-subject "CSF stitch alert: high_memory"
set message "%%results%%"
next
end
3. Create an automation trigger:
config system automation-trigger
edit "auto_high_memory"
set event-type low-memory
next
end
4. Create an automation stitch:
config system automation-stitch
edit "auto_high_memory"
set trigger "auto_high_memory"
set action "high_memory_debug" "auto_high_memory_email"
next
end
FortiOS 6.4.2 Administration Guide 361
Fortinet Inc.
Fortinet Security Fabric
To edit the automation stitch in the GUI:
1. Go to Security Fabric > Automation.
2. Double click the auto_high_memory stitch.
3. Edit the stitch as required, then click OK.
Results
When FortiGate enters conserve mode due to the memory-use-threshold-red being exceeded, the GUI displays a
notice, and the auto_high_memory automation stitch is triggered, causing the CLI script to run and the results of the
script to be emailed to the specified address.
Here is an example of the email message:
FortiOS 6.4.2 Administration Guide 362
Fortinet Inc.
Fortinet Security Fabric
CSF stitch alert: high_memory
[email protected]
Thu 11/21/2019 11:06 AM
James Li
FGT[FGVM16TM19000026] Automation Stitch:auto_high_memory is triggered.
########## script name: autod.47 ##########
========== #1, 2019-11-21 11:07:24 ==========
FGVM16TM19000026 $ diag deb cli 8
Debug messages will be on for 25 minutes.
FGVM16TM19000026 $ diag deb console timestamp enable
FGVM16TM19000026 $ diag deb enable
FGVM16TM19000026 $ diag deb crashlog read
1: 2019-08-08 11:35:25 the killed daemon is /bin/dhcpcd: status=0x0
2: 2019-08-08 17:52:47 the killed daemon is /bin/pyfcgid: status=0x0
3: 2019-08-23 11:32:31 from=license status=INVALID
4: 2019-08-23 11:32:32 from=license status=INVALID
5: 2019-11-21 09:53:31 from=license status=VALID
...
Monitoring the Security Fabric using FortiExplorer for Apple TV
FortiExplorer for Apple TV allows you to use a TV screen to monitor your entire Security Fabric.
FortiExplorer for Apple TV is an analysis tool that provides easy to use NOC and SOC monitoring capabilities. The app
features real-time data traffic, visual alerts, as well as a general overview of hardware devices, operating systems, and
interfaces. The monitor also provides a wireless health summary of your entire network across multiple buildings. If an
access point goes offline, you will be notified about the network's health. After the issues are resolved, you will
immediately see the health update on your screen.
FortiOS 6.4.2 Administration Guide 363
Fortinet Inc.
Fortinet Security Fabric
Getting started with FortiExplorer for Apple TV
Download FortiExplorer for Apple TV from the app store on Apple TV. After the app is installed, add devices using the
Apple TV remote or by sharing a login profile with FortiExplorer. Once the devices are added, you can use FortiExplorer
for Apple TV to view real-time data in the Network Operations Center, Security Operations Center, and Software-Defined
Branch.
To get started with FortiExplorer for Apple TV:
1. Download the app and add devices to FortiExplorer for Apple TV.
You can add devices by sharing a login profile with FortiExplorer or logging into the device directly on FortiExplorer
for Apple TV.
2. View the physical topology of the Fabric to identify risks
3. View the Fabric components as seen on the root FortiGate.
4. View an executive summary of the three largest areas of security focus in the Security Fabric.
5. View data collected by FortiAnalyzer on the endpoints on your network.
6. View vulnerability data collected by FortiClient EMS.
7. Use the Software-Defined Branch module to monitor interface SD-WAN usage and associated service level
agreements.
NOC and SOC example
In this example, you have configured your FortiGates, FortiAnalyzer and other devices in your Security Fabric. Now you
want to use FortiExplorer for Apple TV to display the status of the devices on a TV in your Network Operation Center or
Security Operation Center.
Topology
This topology has a Headquarter and two Branches. Within the Headquarter is the Enterprise Core and two FortiGates
acting as ISFWs. In addition, an on-premise FortiAnalyzer collects all logging information from the fabric devices. The
FortiClient EMS manages all the endpoints within the topology.
The two branches are configured with SD-WAN with VPN overlays to the Enterprise Core. Traffic is steered towards the
overlays and underlays based on SD-WAN Rules.
Using FortiExplorer for Apple TV, you will be able to monitor the different components in this topology.
FortiOS 6.4.2 Administration Guide 364
Fortinet Inc.
Fortinet Security Fabric
To take advantage of the views in the FortiExplorer for Apple TV, you should configure:
l Security Fabric on all FortiGates. See Configuring the root FortiGate and downstream FortiGates on page 131.
l FortiAnalyzer Logging. See Configuring FortiAnalyzer on page 138.
l FortiClient EMS. See FortiClient EMS on page 150
Adding the root FortiGate to FortiExplorer for Apple TV
By adding the root FortiGate, you can view the entire topology and navigate to branch FortiGates in the SD-WAN view. If
you are already using FortiExplorer on a mobile device, you can connect the same FortiGate device to Apple TV by
sharing the login credentials on both devices. Alternatively, you can manually connect to your root FortiGate directly from
the app.
To share login credentials between FortiExplorer and FortiExplorer for Apple TV:
1. Connect the FortiExplorer and FortiExplorer for Apple TV devices to the same network.
2. On FortiExplorer for Apple TV, click New FortiGate.
3. In FortiExplorer, go to My Fabric.
FortiOS 6.4.2 Administration Guide 365
Fortinet Inc.
Fortinet Security Fabric
4. Swipe right on the device you want to share, and tap Share Login Profile.
5. Tap Share to Apple TV.
FortiOS 6.4.2 Administration Guide 366
Fortinet Inc.
Fortinet Security Fabric
6. On Apple TV, click Accept. FortiExplorer for Apple TV confirms the request and proceeds to the device main menu.
To add devices to FortiExplorer for Apple TV:
1. In the Devices menu, click New FortiGate. The Login to FortiGate dialog box is displayed.
2. In the IP Address/Host Name field, take one of the following actions:
l Enter the device IP address and port, if not using the default admin port 443
l Enter the full host name including the domain. Enter port if not using the default admin port 443.
3. Enter the Username and Password for the FortiGate device.
4. Click Remember to save time entering the login credentials later.
FortiOS 6.4.2 Administration Guide 367
Fortinet Inc.
Fortinet Security Fabric
5. Click Login. The device is added to FortiExplorer for Apple TV.
If the IP or hostname is not defined in the CN or SAN field of your certificate, you will
receive a prompt that "Your connection is not private". You may choose to continue with
your connection.
Viewing the Fabric Topology monitor
Use the Fabric Topology monitor to view the physical topology of the Fabric to identify risks. FortiGate devices with
version 6.4. and above can drilldown further to see additional information for devices such as FortiGates, FortiAPs, and
FortiSwitches.
To view the Fabric Topology monitor, go to Network Operations Center > Fabric Topology. This monitor displays the
same information as the Physical Topology on the FortiGate
FortiOS 6.4.2 Administration Guide 368
Fortinet Inc.
Fortinet Security Fabric
Use your remote to navigate through the devices in the Fabric topology. Click a device to view the drilldown information.
To return to the default view, click the Menu button.
Viewing the Fabric Overview monitor
Use the Fabric Overview monitor to view the Fabric components as seen on the Dashboard of the Fabric Root FortiGate
in the example topology. Each device must be authorized and be part of the Fabric.
For information about configuring the Security Fabric, see Fortinet Security Fabric on page 128
To view the Fabric Overview monitor, go to Network Operations Center > Fabric Overview.
FortiOS 6.4.2 Administration Guide 369
Fortinet Inc.
Fortinet Security Fabric
The Security Fabric monitor has multiple panes. To see data populated on the panes, ensure that proper configurations
are applied on the Fabric devices:
Pane Description Configuration
Fabric Connectors Displays external SDN connectors that are Configure Security Fabric > External
enabled. Connectors.
Security Fabric Displays the number of devices in the Configure Security Fabric > Fabric
Overview topology. Connectors.
Attack Surface Displays devices detected by the FortiGate Ensure Device Detection is configured on the
with a server tag. interfaces(s). Go to Network > Interfaces.
Device Inventory Displays devices based on Hardware Vendor Ensure Device Detection is configured on the
and detected OS interface(s). Go to Network > Interfaces.
Endpoint Coverage Displays the number of online devices and Ensure Device Detection is configured on the
the percentage of Unscanned, Vulnerable, interface(s). Vulnerability scan results come
and Secured devices. from FortiClient EMS. Go to Network >
Interfaces.
Device related information only corresponds to devices local to the FortiGate. Device
information from downstream FortiGates do not propagate to the Upstream FortiGate.
FortiOS 6.4.2 Administration Guide 370
Fortinet Inc.
Fortinet Security Fabric
Viewing the Security Rating monitor
The Security Rating monitor is separated into three major scorecards: Security Posture, Fabric Coverage, and
Optimization, which provide an executive summary of the three largest areas of security focus in the Security Fabric.
To see the Security Rating summary, the root FortiGate and all FortiGates within the Fabric should have the proper
FortiGuard Security Rating license. Security rating is performed on the root FortiGate. Its reports are generated
periodically.
To view the Security Rating monitor, go to Network Operations Center > Security Rating.
The scorecards show an overall score of the performance and sub-categories. The point score represents the net score
for all passed and failed items in that area.
For more information about the Security Rating score, see Security Fabric score on page 217.
Viewing the Compromised Hosts monitor
The Compromised Hosts monitor leverages the data collected by FortiAnalyzer on the endpoints on your network. To
see compromised hosts, the FortiAnalyzer must have a FortiGuard Indicators of Compromise license. The IOC service
helps identify compromised hosts based on infected websites that it may have visited.
This monitor captures the same information as seen on the Compromised Hosts monitor on the FortiGate.
FortiOS 6.4.2 Administration Guide 371
Fortinet Inc.
Fortinet Security Fabric
To view the Compromised Hosts monitor:
1. Go to Security Operations Center > Compromised Hosts.
2. In the left-hand pane, scroll through the user list. The monitor displays three panes:
l The User Information pane displays the user's contact information and IP address.
l The Topology View pane displays the user's location in the topology.
l The Verdict View pane displays the Malware, Detected Method, and Security Action.
Viewing the Vulnerability Monitor
The Vulnerability Monitor obtains data from FortiClient EMS. It displays vulnerabilities detected by the FortiClient
endpoint, categorized into Critical, High, Medium and Low risk. In this example, an on-premise FortiClient EMS is
connected on the root FortiGate’s Fabric Connector.
This monitor captures the same information as seen on the Top Vulnerable Endpoint Devices monitor on the FortiGate.
FortiOS 6.4.2 Administration Guide 372
Fortinet Inc.
Fortinet Security Fabric
To view the Vulnerability Monitor:
1. Go to Security Operations Center > Vulnerability Monitor. The monitor displays a user list and their vulnerabilities.
2. Use your remote to scroll through the user list. The vulnerability details are displayed on the right side of the monitor.
l The User Information pane displays the user's contact details and IP address.
l The Vulnerability Summary pane displays the number of vulnerabilities categorized into Critical, High, Medium
and Low risk.
l The Topology View pane displays the user's location in the topology.
l The Top Vulnerabilities pane displays the top vulnerabilities by severity.
Using the SD-WAN monitor
In the example topology, the branches are configured to use SD-WAN. You can use the top-right navigation menu in the
SD-WAN monitor to navigate to the Branch FortiGate to display information about the SD-WAN.
To view the SD-WAN monitor, go to Software-Defined Branch > SD-WAN Monitor.
The SD-WAN monitor summarizes the SD-WAN members, Zones, SD-WAN Rules and health checks deployed on the
FortiGate. It shows the interface member's SD-WAN usage and its associated service level agreements. The monitor
contains a chart that shows if the ports are meeting the SLA target for bandwidth, jitter and latency per the health check
in use in each SD-WAN Rule.
FortiOS 6.4.2 Administration Guide 373
Fortinet Inc.
Fortinet Security Fabric
Some of the SD-WAN statistics are only available in FOS 6.4.1 and higher.
To view SD-WAN usage charts:
1. In the SD-WAN Overview area, Use your remote to select the SD-WAN Usage pane.
2. Scroll left and right to view Bandwidth, Volume and Sessions charts for the VIRTUAL-WAN-LINK and Underlay
interfaces in the SD-WAN Zones pane.
To view SLA targets:
1. In the SD-WAN Rules area, use your remote to scroll the rules pane at the left-side of the monitor.
l The Destinations pane displays the destination details.
l The Performance SLA pane displays the SLA targets for the rule.
l The SD-WAN Active Interface pane displays a checkmark next to the active interface.
FortiOS 6.4.2 Administration Guide 374
Fortinet Inc.
Fortinet Security Fabric
2. Use your remote to navigate between the Latency, Jitter, and Packet Loss charts.
To view a branch in the topology:
1. Use your remote to swipe to the top navigation in the monitor. Wait for the topology to load.
2. At the top-right of the monitor, select the current device.
3. Select the device you want to view.
Troubleshooting
The following topics provide troubleshooting information for the Fortinet Security Fabric:
FortiOS 6.4.2 Administration Guide 375
Fortinet Inc.
Fortinet Security Fabric
l Viewing a summary of all connected FortiGates in a Security Fabric on page 376
l Diagnosing automation stitches on page 378
Viewing a summary of all connected FortiGates in a Security Fabric
In downstream FortiGates, the diagnose sys csf global command shows a summary of all of the connected
FortiGates in the Security Fabric.
To view a Security Fabric summary on a downstream FortiGate:
# diagnose sys csf global
Current vision:
[
{
"path":"FGVM01TM19000001",
"mgmt_ip_str":"104.196.102.183",
"mgmt_port":10403,
"sync_mode":1,
"saml_role":"identity-provider",
"admin_port":443,
"serial":"FGVM01TM19000001",
"host_name":"admin-root",
"firmware_version_major":6,
"firmware_version_minor":2,
"firmware_version_patch":0,
"firmware_version_build":1010,
"subtree_members":[
{
"serial":"FGVM01TM19000002"
},
{
"serial":"FGVM01TM19000003"
},
{
"serial":"FGVM01TM19000004"
},
{
"serial":"FGVM01TM19000005"
}
]
},
{
"path":"FGVM01TM19000001:FGVM01TM19000002",
"mgmt_ip_str":"104.196.102.183",
"mgmt_port":10423,
"sync_mode":1,
"saml_role":"service-provider",
"admin_port":443,
"serial":"FGVM01TM19000002",
"host_name":"Branch_Office_01",
"firmware_version_major":6,
"firmware_version_minor":2,
"firmware_version_patch":0,
"firmware_version_build":1010,
FortiOS 6.4.2 Administration Guide 376
Fortinet Inc.
Fortinet Security Fabric
"upstream_intf":"Branch-HQ-A",
"upstream_serial":"FGVM01TM19000001",
"parent_serial":"FGVM01TM19000001",
"parent_hostname":"admin-root",
"upstream_status":"Authorized",
"upstream_ip":22569994,
"upstream_ip_str":"10.100.88.1",
"subtree_members":[
],
"is_discovered":true,
"ip_str":"10.0.10.2",
"downstream_intf":"To-HQ-A",
"idx":1
},
{
"path":"FGVM01TM19000001:FGVM01TM19000003",
"mgmt_ip_str":"104.196.102.183",
"mgmt_port":10407,
"sync_mode":1,
"saml_role":"service-provider",
"admin_port":443,
"serial":"FGVM01TM19000003",
"host_name":"Enterprise_Second_Floor",
"firmware_version_major":6,
"firmware_version_minor":2,
"firmware_version_patch":0,
"firmware_version_build":1010,
"upstream_intf":"port3",
"upstream_serial":"FGVM01TM19000001",
"parent_serial":"FGVM01TM19000001",
"parent_hostname":"admin-root",
"upstream_status":"Authorized",
"upstream_ip":22569994,
"upstream_ip_str":"10.100.88.1",
"subtree_members":[
],
"is_discovered":true,
"ip_str":"10.100.88.102",
"downstream_intf":"port1",
"idx":2
},
{
"path":"FGVM01TM19000001:FGVM01TM19000004",
"mgmt_ip_str":"104.196.102.183",
"mgmt_port":10424,
"sync_mode":1,
"saml_role":"service-provider",
"admin_port":443,
"serial":"FGVM01TM19000004",
"host_name":"Branch_Office_02",
"firmware_version_major":6,
"firmware_version_minor":2,
"firmware_version_patch":0,
"firmware_version_build":1010,
"upstream_intf":"HQ-MPLS",
"upstream_serial":"FGVM01TM19000001",
FortiOS 6.4.2 Administration Guide 377
Fortinet Inc.
Fortinet Security Fabric
"parent_serial":"FGVM01TM19000001",
"parent_hostname":"admin-root",
"upstream_status":"Authorized",
"upstream_ip":22569994,
"upstream_ip_str":"10.100.88.1",
"subtree_members":[
],
"is_discovered":true,
"ip_str":"10.0.12.3",
"downstream_intf":"To-HQ-MPLS",
"idx":3
},
{
"path":"FGVM01TM19000001:FGVM01TM19000005",
"mgmt_ip_str":"104.196.102.183",
"mgmt_port":10404,
"sync_mode":1,
"saml_role":"service-provider",
"admin_port":443,
"serial":"FGVM01TM19000005",
"host_name":"Enterprise_First_Floor",
"firmware_version_major":6,
"firmware_version_minor":2,
"firmware_version_patch":0,
"firmware_version_build":1010,
"upstream_intf":"port3",
"upstream_serial":"FGVM01TM19000001",
"parent_serial":"FGVM01TM19000001",
"parent_hostname":"admin-root",
"upstream_status":"Authorized",
"upstream_ip":22569994,
"upstream_ip_str":"10.100.88.1",
"subtree_members":[
],
"is_discovered":true,
"ip_str":"10.100.88.101",
"downstream_intf":"port1",
"idx":4
}
]
Diagnosing automation stitches
Diagnose commands are available to:
l Test an automation stitch
l Enable or disable log dumping for automation stitches
l Display the settings of every automation stitch
l Display statistics on every automation stitch
To test an automation stitch:
diagnose automation test <automation-stitch-name>
Example:
FortiOS 6.4.2 Administration Guide 378
Fortinet Inc.
Fortinet Security Fabric
# diagnose automation test HA-failover
automation test is done. stitch:HA-failover
To toggle log dumping:
diagnose test application autod 1
Examples:
# diagnose test application autod 1
autod log dumping is enabled
# diagnose test application autod 1
autod log dumping is disabled
autod logs dumping summary:
autod dumped total:7 logs, num of logids:4
To display the settings for all of the automation stitches:
diagnose test application autod 2
Example:
# diagnose test application autod 2
csf: enabled root:yes
total stitches activated: 3
stitch: Compromised-IP-Banned
destinations: all
trigger: Compromised-IP-Banned
local hit: 0 relayed to: 0 relayed from: 0
actions:
Compromised-IP-Banned_ban-ip type:ban-ip interval:0
stitch: HA-failover
destinations: HA-failover_ha-cluster_25;
trigger: HA-failover
local hit: 0 relayed to: 0 relayed from: 0
actions:
HA-failover_email type:email interval:0
subject: HA Failover
mailto:[email protected];
stitch: rebooot
destinations: all
trigger: reboot
local hit: 0 relayed to: 0 relayed from: 0
actions:
action1 type:alicloud-function interval:0
delay:1 required:yes
Account ID: id
Region: region
Function domain: fc.aliyuncs.com
Version: versoin
FortiOS 6.4.2 Administration Guide 379
Fortinet Inc.
Fortinet Security Fabric
Service name: serv
Function name: funcy
headers:
To display statistic on all of the automation stitches:
diagnose test application autod 3
Example:
stitch: Compromised-IP-Banned
local hit: 0 relayed to: 0 relayed from: 0
last trigger:Wed Dec 31 20:00:00 1969
last relay:Wed Dec 31 20:00:00 1969
actions:
Compromised-IP-Banned_ban-ip:
done: 1 relayed to: 0 relayed from: 0
last trigger:Wed Dec 31 20:00:00 1969
last relay:
stitch: HA-failover
local hit: 0 relayed to: 0 relayed from: 0
last trigger:Thu May 24 11:35:22 2018
last relay:Thu May 24 11:35:22 2018
actions:
HA-failover_email:
done: 1 relayed to: 1 relayed from: 1
last trigger:Thu May 24 11:35:22 2018
last relay:Thu May 24 11:35:22 2018
stitch: rebooot
local hit: 2 relayed to: 1 relayed from: 1
last trigger:Fri May 3 13:30:56 2019
last relay:Fri May 3 13:30:23 2019
actions:
action1
done: 1 relayed to: 0 relayed from: 0
last trigger:Fri May 3 13:30:56 2019
last relay:
logid2stitch mapping:
id:20103 local hit: 0 relayed to: 0 relayed from: 0
License Expiry
lambada
id:32138 local hit: 2 relayed to: 1 relayed from: 1
Compromised-IP-Banned
HA-failover
rebooot
action run cfg&stats:
total:2 cur:0 done:1 drop:1
email:
flags:10
stats: total:1 cur:0 done:1 drop:0
ios-notification:
flags:1
FortiOS 6.4.2 Administration Guide 380
Fortinet Inc.
Fortinet Security Fabric
stats: total:0 cur:0 done:0 drop:0
alert:
flags:0
stats: total:0 cur:0 done:0 drop:0
disable-ssid:
flags:7
stats: total:0 cur:0 done:0 drop:0
quarantine:
flags:7
stats: total:0 cur:0 done:0 drop:0
quarantine-forticlient:
flags:4
stats: total:0 cur:0 done:0 drop:0
quarantine-nsx:
flags:4
stats: total:0 cur:0 done:0 drop:0
ban-ip:
flags:7
stats: total:0 cur:0 done:0 drop:0
aws-lambda:
flags:11
stats: total:0 cur:0 done:0 drop:0
webhook:
flags:11
stats: total:0 cur:0 done:0 drop:0
cli-script:
flags:10
stats: total:0 cur:0 done:0 drop:0
azure-function:
flags:11
stats: total:1 cur:0 done:0 drop:1
google-cloud-function:
flags:11
stats: total:0 cur:0 done:0 drop:0
alicloud-function:
flags:11
stats: total:0 cur:0 done:0 drop:0
FortiOS 6.4.2 Administration Guide 381
Fortinet Inc.
Network
The following topics provide information about network settings:
l Interfaces on page 382
l DNS on page 425
l Explicit and transparent proxies on page 438
l SD-WAN on page 509
l DHCP server on page 484
l Static routes on page 489
l Policy routes on page 490
l RIP on page 492
l OSPF on page 492
l BGP on page 492
l Multicast on page 493
l FortiExtender on page 497
l Direct IP support for LTE/4G on page 501
l LLDP reception on page 504
l Route leaking between VRFs on page 506
Interfaces
Physical and virtual interfaces allow traffic to flow between internal networks, and between the internet and internal
networks. FortiGate has options for setting up interfaces and groups of subnetworks that can scale as your organization
grows. You can create and edit VLAN, EMAC-VLAN, switch interface, zones, and so on.
The following topics provide information about interfaces:
l Interface settings on page 383
l Aggregation and redundancy on page 386
l VLANs on page 388
l Enhanced MAC VLANs on page 394
l Inter-VDOM routing on page 397
l Software switch on page 402
l Hardware switch on page 404
l Zone on page 405
l Virtual Wire Pair on page 407
l Virtual switch support for FortiGate 300E series on page 409
l Failure detection for aggregate and redundant interfaces on page 411
l VLAN inside VXLAN on page 411
l Virtual Wire Pair with VXLAN on page 414
l QinQ on page 416
FortiOS 6.4.2 Administration Guide 382
Fortinet Inc.
Network
l Assign a subnet with the FortiIPAM service on page 416
l Configure a VRF ID on an interface on page 423
Interface settings
Administrators can configure both physical and virtual FortiGate interfaces in Network > Interfaces. There are different
options for configuring interfaces when FortiGate is in NAT mode or transparent mode.
To configure an interface in the GUI:
1. Go to Network > Interfaces.
2. Click Create New > Interface.
3. Configure the interface fields:
Interface Name Physical interface names cannot be changed.
Alias Enter an alternate name for a physical interface on the FortiGate unit. This
field appears when you edit an existing physical interface. The alias does not
appear in logs.
The maximum length of the alias is 25 characters.
Type The configuration type for the interface, such as VLAN or Software Switch.
Link Status Indicates whether the interface is connected to a network or not (link status is
up or down). This field is available when you edit an existing physical interface.
Interface This field is available when Type is set to VLAN.
Select the name of the physical interface that you want to add a VLAN
interface to. Once created, the VLAN interface is listed below its physical
interface in the Interface list.
You cannot change the physical interface of a VLAN interface except when
you add a new VLAN interface.
VLAN ID This field is available when Type is set to VLAN.
Enter the VLAN ID. The VLAN ID can be any number between 1 and 4094 and
must match the VLAN ID added by the IEEE 802.1Q-compliant router or
switch that is connected to the VLAN subinterface.
The VLAN ID cannot be edited after the interface is added.
Virtual Domain Select the virtual domain to add the interface to.
Only administrator accounts with the super_admin profile can change the
Virtual Domain.
Role Set the role setting for the interface. Different settings will be shown or hidden
when editing an interface depending on the role.
l LAN: Used to connected to a local network of endpoints. It is default role
for new interfaces.
l WAN: Used to connected to the internet. When WAN is selected, the
Estimated bandwidth setting is available, and the following settings are
not: DHCP server, Create address object matching subnet, Device
FortiOS 6.4.2 Administration Guide 383
Fortinet Inc.
Network
detection, Security mode, One-arm sniffer, Dedicate to extension/fortiap
modes, and Admission Control.and will show Estimated Bandwidth
settings.
l DMZ: Used to connected to the DMZ. When selected, DHCP server and
Security mode are not available.
l Undefined: The interface has no specific role. When selected, Create
address object matching subnet is not available.
Interface Members This section can has different formats depending on the Type:
Software Switch: This field is read-only, and shows the interfaces that belong
to the virtual interface of the software switch.
802.3ad Aggregate or Redundant Interface: This field includes the available
and selected interface lists.
Addressing mode Select the addressing mode for the interface.
l Manual: Add an IP address and netmask for the interface. If IPv6
configuration is enabled,you can add both an IPv4 and an IPv6 address.
l DHCP: Get the interface IP address and other network settings from a
DHCP server.
l PPPoE: Get the interface IP address and other network settings from a
PPPoE server. This option is only available on the low-end FortiGate
models.
l Auto-managed by FortiIPAM: Assign subnets to prevent duplicate
IP addresses from overlapping within the same Security Fabric. See
Assign a subnet with the FortiIPAM service on page 416.
l One-Arm Sniffer: Set the interface as a sniffer port so it can be used to
detect attacks.
IP/Netmask If Addressing Mode is set to Manual, enter an IPv4 address and subnet mask
for the interface. FortiGate interfaces cannot have multiple IP addresses on
the same subnet.
IPv6 Address/Prefix If Addressing Mode is set to Manual and IPv6 support is enabled, enter an
IPv6 address and subnet mask for the interface. A single interface can have an
IPv4 address, IPv6 address, or both.
Create address object This option is available when Role is set to LAN or DMZ.
matching subnet Enable this option to automatically create an address object that matches the
interface subnet.
Secondary IP Address Add additional IPv4 addresses to this interface.
IPv4 Administrative Access Select the types of administrative access permitted for IPv4 connections to this
interface. See Configure administrative access to interfaces on page 385.
IPv6 Administrative Access Select the types of administrative access permitted for IPv6 connections to this
interface. See Configure administrative access to interfaces on page 385.
DHCP Server Select to enable a DHCP server for the interface.
Device Detection Enable/disable passively gathering device identity information about the
devices on the network that are connected to this interface.
FortiOS 6.4.2 Administration Guide 384
Fortinet Inc.
Network
Security Mode Enable/disable captive portal authentication for this interface. After enabling
captive portal authentication, you can configure the authentication portal, user
and group access, custom portal messages, exempt sources and
destinations/services, and redirect after captive portal.
Outbound shaping profile Enable/disable traffic shaping on the interface. This allows you to enforce
bandwidth limits on individual interfaces.
Comments Enter a description of the interface of up to 255 characters.
Status Enable/disable the interface.
l Enabled: The interface is active and can accept network traffic.
l Disabled: The interface is not active and cannot accept traffic.
4. Click OK.
To configure an interface in the CLI:
config system interface
edit "<Interface_Name>"
set vdom "<VDOM_Name>"
set mode static/dhcp/pppoe
set ip <IP_address> <netmask>
set security-mode {none | captive-portal}
set egress-shaping-profile <Profile_name>
set device-identification {enable | disable}
set allowaccess ping https ssh http
set secondary-IP enable
config secondaryip
edit 1
set ip 9.1.1.2 255.255.255.0
set allowaccess ping https ssh snmp http
next
end
next
end
Configure administrative access to interfaces
You can configure the protocols that administrators can use to access interfaces on the FortiGate. This helps secure
access to the FortiGate by restricting access to a limited number of protocols. It helps prevent users from accessing
interfaces that you don't want them to access, such as public-facing ports.
As a best practice, you should configure administrative access when you're setting the IP address for a port.
To configure administrative access to interfaces in the GUI:
1. Go to Network > Interfaces.
2. Create or edit an interface.
FortiOS 6.4.2 Administration Guide 385
Fortinet Inc.
Network
3. In the Administrative Access section, select which protocols to enable for IPv4 and IPv6 Administrative Access.
HTTPS Allow secure HTTPS connections to the FortiGate GUI through this interface. If
configured, this option is enabled automatically.
HTTP Allow HTTP connections to the FortiGate GUI through this interface. This option can
only be enabled if HTTPS is already enabled.
PING The interface responds to pings. Use this setting to verify your installation and for
testing.
FMG-Access Allow FortiManager authorization automatically during the communication
exchanges between FortiManager and FortiGate devices.
SSH Allow SSH connections to the CLI through this interface.
SNMP Allow a remote SNMP manager to request SNMP information by connecting to this
interface.
FTM Allow FortiToken Mobile Push (FTM) access.
RADIUS Accounting Allow RADIUS accounting information on this interface.
Security Fabric Allow Security Fabric access. This enables FortiTelemetry and CAPWAP.
Connection
Aggregation and redundancy
Link aggregation (IEEE 802.3ad) enables you to bind two or more physical interfaces together to form an aggregated
(combined) link. This new link has the bandwidth of all the links combined. If a link in the group fails, traffic is transferred
automatically to the remaining interfaces. The only noticeable effect is reduced bandwidth.
This feature is similar to redundant interfaces. The major difference is a redundant interface group only uses one link at a
time, where an aggregate link group uses the total bandwidth of the functioning links in the group, up to eight (or more).
An interface is available to be an aggregate interface if:
l It is a physical interface and not a VLAN interface or subinterface.
l It is not already part of an aggregate or redundant interface.
l It is in the same VDOM as the aggregated interface. Aggregate ports cannot span multiple VDOMs.
l It does not have an IP address and is not configured for DHCP or PPPoE.
l It is not referenced in any security policy, VIP, IP Pool, or multicast policy.
l It is not an HA heartbeat interface.
l It is not one of the FortiGate-5000 series backplane interfaces.
When an interface is included in an aggregate interface, it is not listed on the Network > Interfaces page. Interfaces still
appear in the CLI although configuration for those interfaces do not take affect. You cannot configure the interface
individually and it is not available for inclusion in security policies, VIPs, IP pools, or routing.
Sample configuration
This example creates an aggregate interface on a FortiGate-140D POE using ports 3-5 with an internal IP address of
10.1.1.123, as well as the administrative access to HTTPS and SSH.
FortiOS 6.4.2 Administration Guide 386
Fortinet Inc.
Network
To create an aggregate interface using the GUI:
1. Go to Network > Interfaces and select Create New > Interface.
2. For Interface Name, enter Aggregate.
3. For the Type, select 802.3ad Aggregate.
4. In the physical Interface Members, click to add interfaces and select ports 4, 5, and 6.
5. For Addressing mode, select Manual.
6. For the IP address for the port, enter 10.1.1.123/24.
7. For Administrative Access, select HTTPS and SSH.
8. Select OK.
To create an aggregate interface using the CLI:
FG140P3G15800330 (aggregate) # show
config system interface
edit "aggregate"
set vdom "root"
set ip 10.1.1.123 255.255.255.0
set allowaccess ping https ssh snmp http fgfm radius-acct capwap ftm
set type aggregate
set member "port3" "port4" "port5"
set device-identification enable
set lldp-transmission enable
set fortiheartbeat enable
set role lan
set snmp-index 45
next
end
Redundancy
In a redundant interface, traffic only goes over one interface at any time. This differs from an aggregated interface where
traffic goes over all interfaces for increased bandwidth. This difference means redundant interfaces can have more
robust configurations with fewer possible points of failure. This is important in a fully-meshed HA configuration.
An interface is available to be in a redundant interface if:
l It is a physical interface and not a VLAN interface.
l It is not already part of an aggregated or redundant interface.
l It is in the same VDOM as the redundant interface.
l It does not have an IP address and is not configured for DHCP or PPPoE.
l It has no DHCP server or relay configured on it.
l It does not have any VLAN subinterfaces.
l It is not referenced in any security policy, VIP, or multicast policy.
l It is not monitored by HA.
l It is not one of the FortiGate-5000 series backplane interfaces.
When an interface is included in a redundant interface, it is not listed on the Network > Interfaces page. You cannot
configure the interface individually and it is not available for inclusion in security policies, VIPs, or routing.
FortiOS 6.4.2 Administration Guide 387
Fortinet Inc.
Network
Sample configuration
To create a redundant interface using the GUI:
1. Go to Network > Interfaces and select Create New > Interface.
2. For Interface Name, enter Redundant.
3. For the Type, select Redundant Interface.
4. In the physical Interface Members, click to add interfaces and select ports 4, 5, and 6.
5. For Addressing mode, select Manual.
6. For the IP address for the port, enter 10.13.101.100/24.
7. For Administrative Access, select HTTPS and SSH.
8. Select OK.
To create a redundant interface using the CLI:
config system interface
edit "red"
set vdom "root"
set ip 10.13.101.100 255.255.255.0
set allowaccess https http
set type redundant
set member "port4" "port5" "port6"
set device-identification enable
set role lan
set snmp-index 9
next
end
VLANs
Virtual Local Area Networks (VLANs) multiply the capabilities of your FortiGate unit and can also provide added network
security. VLANs use ID tags to logically separate devices on a network into smaller broadcast domains. These smaller
domains forward packets only to devices that are part of that VLAN domain. This reduces traffic and increases network
security.
VLANs in NAT mode
In NAT mode, the FortiGate unit functions as a layer-3 device. In this mode, the FortiGate unit controls the flow of
packets between VLANs and can also remove VLAN tags from incoming VLAN packets. The FortiGate unit can also
forward untagged packets to other networks such as the Internet.
In NAT mode, the FortiGate unit supports VLAN trunk links with IEEE 802.1Q-compliant switches or routers. The trunk
link transports VLAN-tagged packets between physical subnets or networks. When you add VLAN subinterfaces to the
FortiGate's physical interfaces, the VLANs have IDs that match the VLAN IDs of packets on the trunk link. The FortiGate
unit directs packets with VLAN IDs to subinterfaces with matching IDs.
You can define VLAN subinterfaces on all FortiGate physical interfaces. However, if multiple virtual domains are
configured on the FortiGate unit, you only have access to the physical interfaces on your virtual domain. The FortiGate
unit can tag packets leaving on a VLAN subinterface. It can also remove VLAN tags from incoming packets and add a
different VLAN tag to outgoing packets.
FortiOS 6.4.2 Administration Guide 388
Fortinet Inc.
Network
Normally in VLAN configurations, the FortiGate unit's internal interface is connected to a VLAN trunk, and the external
interface connects to an Internet router that is not configured for VLANs. In this configuration, the FortiGate unit can
apply different policies for traffic on each VLAN interface connected to the internal interface, which results in less
network traffic and better security.
Sample topology
In this example, two different internal VLAN networks share one interface on the FortiGate unit and share the connection
to the Internet. This example shows that two networks can have separate traffic streams while sharing a single interface.
This configuration can apply to two departments in a single company or to different companies.
There are two different internal network VLANs in this example. VLAN_100 is on the 10.1.1.0/255.255.255.0 subnet, and
VLAN_200 is on the 10.1.2.0/255.255.255.0 subnet. These VLANs are connected to the VLAN switch.
The FortiGate internal interface connects to the VLAN switch through an 802.1Q trunk. The internal interface has an IP
address of 192.168.110.126 and is configured with two VLAN subinterfaces (VLAN_100 and VLAN_200). The external
interface has an IP address of 172.16.21.2 and connects to the Internet. The external interface has no VLAN
subinterfaces.
When the VLAN switch receives packets from VLAN_100 and VLAN_200, it applies VLAN ID tags and forwards the
packets of each VLAN both to local ports and to the FortiGate unit across the trunk link. The FortiGate unit has policies
that allow traffic to flow between the VLANs, and from the VLANs to the external network.
Sample configuration
In this example, both the FortiGate unit and the Cisco 2950 switch are installed and connected and basic configuration
has been completed. On the switch, you need access to the CLI to enter commands. No VDOMs are enabled in this
example.
General configuration steps include:
1. Configure the external interface.
2. Add two VLAN subinterfaces to the internal network interface.
FortiOS 6.4.2 Administration Guide 389
Fortinet Inc.
Network
3. Add firewall addresses and address ranges for the internal and external networks.
4. Add security policies to allow:
l the VLAN networks to access each other.
l the VLAN networks to access the external network.
To configure the external interface:
config system interface
edit external
set mode static
set ip 172.16.21.2 255.255.255.0
end
To add VLAN subinterfaces:
config system interface
edit VLAN_100
set vdom root
set interface internal
set type vlan
set vlanid 100
set mode static
set ip 10.1.1.1 255.255.255.0
set allowaccess https ping
next
edit VLAN_200
set vdom root
set interface internal
set type vlan
set vlanid 200
set mode static
set ip 10.1.2.1 255.255.255.0
set allowaccess https ping
end
To add the firewall addresses:
config firewall address
edit VLAN_100_Net
set type ipmask
set subnet 10.1.1.0 255.255.255.0
next
edit VLAN_200_Net
set type ipmask
set subnet 10.1.2.0 255.255.255.0
end
To add security policies:
Policies 1 and 2 do not need NAT enabled, but policies 3 and 4 do need NAT enabled.
config firewall policy
edit 1
set srcintf VLAN_100
set srcaddr VLAN_100_Net
FortiOS 6.4.2 Administration Guide 390
Fortinet Inc.
Network
set dstintf VLAN_200
set dstaddr VLAN_200_Net
set schedule always
set service ALL
set action accept
set nat disable
set status enable
next
edit 2
set srcintf VLAN_200
set srcaddr VLAN_200_Net
set dstintf VLAN_100
set dstaddr VLAN_100_Net
set schedule always
set service ALL
set action accept
set nat disable
set status enable
next
edit 3
set srcintf VLAN_100
set srcaddr VLAN_100_Net
set dstintf external
set dstaddr all
set schedule always
set service ALL
set action accept
set nat enable
set status enable
next
edit 4
set srcintf VLAN_200
set srcaddr VLAN_200_Net
set dstintf external
set dstaddr all
set schedule always
set service ALL
set action accept
set nat enable
set status enable
end
VLANs in transparent mode
In transparent mode, the FortiGate unit behaves like a layer-2 bridge but can still provide services such as antivirus
scanning, web filtering, spam filtering, and intrusion protection to traffic. Some limitations of transparent mode is that you
cannot use SSL VPN, PPTP/L2TP VPN, DHCP server, or easily perform NAT on traffic. The limits in transparent mode
apply to IEEE 802.1Q VLAN trunks passing through the unit.
You can insert the FortiGate unit operating in transparent mode into the VLAN trunk without making changes to your
network. In a typical configuration, the FortiGate unit internal interface accepts VLAN packets on a VLAN trunk from a
VLAN switch or router connected to internal network VLANs. The FortiGate external interface forwards VLAN-tagged
packets through another VLAN trunk to an external VLAN switch or router and on to external networks such as the
Internet. You can configure the unit to apply different policies for traffic on each VLAN in the trunk.
FortiOS 6.4.2 Administration Guide 391
Fortinet Inc.
Network
To pass VLAN traffic through the FortiGate unit, you add two VLAN subinterfaces with the same VLAN ID, one to the
internal interface and the other to the external interface. You then create a security policy to permit packets to flow from
the internal VLAN interface to the external VLAN interface. If required, create another security policy to permit packets to
flow from the external VLAN interface to the internal VLAN interface. Typically in transparent mode, you do not permit
packets to move between different VLANs. Network protection features such as spam filtering, web filtering, and anti-
virus scanning, are applied through the UTM profiles specified in each security policy, enabling very detailed control over
traffic.
When the FortiGate unit receives a VLAN-tagged packet on a physical interface, it directs the packet to the VLAN
subinterface with the matching VLAN ID. The VLAN tag is removed from the packet and the FortiGate unit then applies
security policies using the same method it uses for non-VLAN packets. If the packet exits the FortiGate unit through a
VLAN subinterface, the VLAN ID for that subinterface is added to the packet and the packet is sent to the corresponding
physical interface.
Sample topology
In this example, the FortiGate unit is operating in transparent mode and is configured with two VLANs: one with an ID of
100 and the other with ID 200. The internal and external physical interfaces each have two VLAN subinterfaces, one for
VLAN_100 and one for VLAN_200.
The IP range for the internal VLAN_100 network is 10.100.0.0/255.255.0.0, and for the internal VLAN_200 network is
10.200.0.0/255.255.0.0.
The internal networks are connected to a Cisco 2950 VLAN switch which combines traffic from the two VLANs onto one
in the FortiGate unit's internal interface. The VLAN traffic leaves the FortiGate unit on the external network interface,
goes on to the VLAN switch, and on to the Internet. When the FortiGate units receives a tagged packet, it directs it from
the incoming VLAN subinterface to the outgoing VLAN subinterface for that VLAN.
In this example, we create a VLAN subinterface on the internal interface and another one on the external interface, both
with the same VLAN ID. Then we create security policies that allow packets to travel between the VLAN_100_int
interface and the VLAN_100_ext interface. Two policies are required: one for each direction of traffic. The same is
required between the VLAN_200_int interface and the VLAN_200_ext interface, for a total of four security policies.
FortiOS 6.4.2 Administration Guide 392
Fortinet Inc.
Network
Sample configuration
There are two main steps to configure your FortiGate unit to work with VLANs in transparent mode:
1. Add VLAN subinterfaces.
2. Add security policies.
You can also configure the protection profiles that manage antivirus scanning, web filtering, and spam filtering.
To add VLAN subinterfaces:
config system interface
edit VLAN_100_int
set type vlan
set interface internal
set vlanid 100
next
edit VLAN_100_ext
set type vlan
set interface external
set vlanid 100
next
edit VLAN_200_int
set type vlan
set interface internal
set vlanid 200
next
edit VLAN_200_ext
set type vlan
set interface external
set vlanid 200
end
To add security policies:
config firewall policy
edit 1
set srcintf VLAN_100_int
set srcaddr all
set dstintf VLAN_100_ext
set dstaddr all
set action accept
set schedule always
set service ALL
next
edit 2
set srcintf VLAN_100_ext
set srcaddr all
set dstintf VLAN_100_int
set dstaddr all
set action accept
set schedule always
set service ALL
next
edit 3
set srcintf VLAN_200_int
FortiOS 6.4.2 Administration Guide 393
Fortinet Inc.
Network
set srcaddr all
set dstintf VLAN_200_ext
set dstaddr all
set action accept
set schedule always
set service ALL
next
edit 4
set srcintf VLAN_200_ext
set srcaddr all
set dstintf VLAN_200_int
set dstaddr all
set action accept
set schedule always
set service ALL
end
Enhanced MAC VLANs
The Media Access Control (MAC) Virtual Local Area Network (VLAN) feature in Linux allows you to configure multiple
virtual interfaces with different MAC addresses (and therefore different IP addresses) on a physical interface.
FortiGate implements an enhanced MAC VLAN consisting of a MAC VLAN with bridge functionality. Because each MAC
VLAN has a unique MAC address, virtual IP addresses (VIPs) and IP pools are supported, and you can disable Source
Network Address Translation (SNAT) in policies.
MAC VLAN cannot be used in a transparent mode virtual domain (VDOM). In a transparent mode VDOM, a packet
leaves an interface with the MAC address of the original source instead of the interface’s MAC address. FortiGate
implements an enhanced version of MAC VLAN where it adds a MAC table in the MAC VLAN which learns the MAC
addresses when traffic passes through.
If you configure a VLAN ID for an enhanced MAC VLAN, it won’t join the switch of the underlying interface. When a
packet is sent to this interface, a VLAN tag is inserted in the packet and the packet is sent to the driver of the underlying
interface. When the underlying interface receives a packet, if the VLAN ID doesn’t match, it won’t deliver the packet to
this enhanced MAC VLAN interface.
When using a VLAN ID, the ID and the underlying interface must be a unique pair, even if the
belong to different VDOMs. This is because the underlying, physical interface uses the VLAN
ID as the identifier to dispatch traffic among the VLAN and enhanced MAC VLAN interfaces.
If you use an interface in an enhanced MAC VLAN, do not use it for other purposes such as a management interface, HA
heartbeat interface, or in Transparent VDOMs.
If a physical interface is used by an EMAC VLAN interface, you cannot use it in a Virtual Wire Pair.
In high availability (HA) configurations, enhanced MAC VLAN is treated as a physical interface. It’s assigned a unique
physical interface ID and the MAC table is synchronized with the secondary devices in the same HA cluster.
FortiOS 6.4.2 Administration Guide 394
Fortinet Inc.
Network
Example 1: Enhanced MAC VLAN configuration for multiple VDOMs that use the same
interface or VLAN
In this example, a FortiGate is connected, through port 1 to a router that’s connected to the Internet. Three VDOMs share
the same interface (port 1) which connects to the same router that’s connected to the Internet. Three enhanced MAC
VLAN interfaces are configured on port 1 for the three VDOMs. The enhanced MAC VLAN interfaces are in the same IP
subnet segment and each have unique MAC addresses.
The underlying interface (port 1) can be a physical interface, an aggregate interface, or a VLAN interface on a physical or
aggregate interface.
To configure enhanced MAC VLAN for this example in the CLI:
config system interface
edit port1.emacvlan1
set vdom VDOM1
set type emac-vlan
set interface port1
next
edit port 1.emacvlan2
set vdom VDOM2
set type emac-vlan
set interface port1
next
edit port1.emacvlan3
set vdom VDOM3
set type emac-vlan
set interface port1
next
end
Example 2: Enhanced MAC VLAN configuration for shared VDOM links among multiple
VDOMs
In this example, multiple VDOMs can connect to each other using enhanced MAC VLAN on network processing unit
(NPU) virtual link (Vlink) interfaces.
FortiOS 6.4.2 Administration Guide 395
Fortinet Inc.
Network
FortiGate VDOM links (NPU-Vlink) are designed to be peer-to-peer connections and VLAN interfaces on NPU Vlink
ports use the same MAC address. Connecting more than two VDOMs using NPU Vlinks and VLAN interfaces is not
recommended.
To configure enhanced MAC VLAN for this example in the CLI:
config system interface
edit npu0_vlink0.emacvlan1
set vdom VDOM1
set type emac-vlan
set interface npu0_vlink0
next
edit npu0_vlink0.emacvlan2
set vdom VDOM3
set type emac-vlan
set interface npu0_vlink0
next
edit npu0_vlink1.emacvlan1
set vdom VDOM2
set type emac-vlan
set interface npu0_vlink1
next
end
Example 3: Enhanced MAC VLAN configuration for unique MAC addresses for each
VLAN interface on the same physical port
Some networks require a unique MAC address for each VLAN interface when the VLAN interfaces share the same
physical port. In this case, the enhanced MAC VLAN interface is used the same way as normal VLAN interfaces.
To configure this, use the set vlanid command for the VLAN tag. The VLAN ID and interface must be a unique pair,
even if they belong to different VDOMs.
To configure enhanced MAC VLAN:
config system interface
edit <interface-name>
set type emac-vlan
FortiOS 6.4.2 Administration Guide 396
Fortinet Inc.
Network
set vlanid <VLAN-ID>
set interface <physical-interface>
next
end
Inter-VDOM routing
In the past, virtual domains (VDOMs) were separate from each other and there was no internal communication. Any
communication between VDOMs involved traffic leaving on a physical interface belonging to one VDOM and re-entering
the FortiGate unit on another physical interface belonging to another VDOM to be inspected by firewall policies in both
directions.
Inter-VDOM routing changes this. With VDOM links, VDOMs can communicate internally without using additional
physical interfaces.
Inter-VDOM routing is the communication between VDOMs. VDOM links are virtual interfaces that connect VDOMs. A
VDOM link contains a pair of interfaces, each one connected to a VDOM and forming either end of the inter-VDOM
connection.
When VDOMs are configured on your FortiGate unit, configuring inter-VDOM routing and VDOM-links is very much like
creating a VLAN interface. VDOM-links are managed through the web-based manager or CLI. In the web-based
manager, VDOM link interfaces are managed in the network interface list.
VDOM link does not support traffic offload. If you want to use traffic offload, use NPU-VDOM-
LINK.
To configure a VDOM link in the GUI:
1. Go to Network > Interfaces.
2. Click Create New > VDOM Link.
3. Configure the fields including the Name, Virtual Domain, IP information, access levels, and other fields.
By default, VDOM links are created as point-to-point (ppp) links. If required, the link type can
be changed in the CLI.
For example, when running OSPF in IPv6, a link-local address is required in order to
communicate with OSPF neighbors. For a VDOM link to obtain a link-local address its type
must be set to ethernet.
To configure a VDOM link in the CLI:
config system vdom-link
edit "<vdom-link-name>"
set type {ppp | ethernet} <--Optional
next
end
config system interface
edit "<vdom-link-name0>"
set vdom "<VDOM Name>"
set type vdom-link
FortiOS 6.4.2 Administration Guide 397
Fortinet Inc.
Network
next
edit "<vdom-link-name1>"
set vdom "<VDOM Name>"
set type vdom-link
next
end
To delete a VDOM link in the GUI:
1. Go to Network > Interfaces.
2. Select a VDOM Link and click Delete.
To delete a VDOM link in the CLI:
config system vdom-link
delete <VDOM-LINK-Name>
end
Sample configuration: Inter-VDOM routing
This example shows how to configure a FortiGate unit to use inter-VDOM routing.
Two departments of a company, Accounting and Sales, are connected to one FortiGate. The company uses a single ISP
to connect to the Internet.
This example includes the following general steps. We recommend following the steps in the order below.
Create the VDOMs
To enable VDOMs and create the Sales and Accounting VDOMs:
config system global
set vdom-mode multi-vdom
end
config system vdom
edit Accounting
next
edit Sales
next
end
FortiOS 6.4.2 Administration Guide 398
Fortinet Inc.
Network
Configure the physical interfaces
Next, configure the physical interfaces. This example uses three interfaces on the FortiGate unit: port2 (internal), port3
(DMZ), and port1 (external). Port2 and port3 interfaces each have a department’s network connected. Port1 is for all
traffic to and from the Internet and uses DHCP to configure its IP address, which is common with many ISPs.
To configure the interfaces:
config global
config system interface
edit port2
set alias AccountingLocal
set vdom Accounting
set mode static
set ip 172.100.1.1 255.255.0.0
set allowaccess https ping ssh
set description "The accounting dept internal interface"
next
edit port3
set alias SalesLocal
set vdom Sales
set mode static
set ip 192.168.1.1 255.255.0.0
set allowaccess https ping ssh
set description "The sales dept. internal interface"
next
edit port1
set alias ManagementExternal
set vdom root
set mode DHCP
set distance 5
set gwdetect enable
set dns-server-override enable
set allowaccess https ssh snmp
set description “The systemwide management interface.”
next
end
end
Configure the VDOM links
To complete the connection between each VDOM and the management VDOM, add the two VDOM links. One pair is the
Accounting – management link and the other is the Sales – management link.
When configuring inter-VDOM links, you do not have to assign IP addresses to the links unless you are using advanced
features such as dynamic routing that require them. Not assigning IP addresses results in faster configuration and more
available IP addresses on your networks.
To configure the Accounting and management VDOM link:
config global
config system vdom-link
edit AccountVlnk
next
end
FortiOS 6.4.2 Administration Guide 399
Fortinet Inc.
Network
config system interface
edit AccountVlnk0
set vdom Accounting
set ip 11.11.11.2 255.255.255.0
set allowaccess https ping ssh
set description “Accounting side of the VDOM link“
next
edit AccountVlnk1
set vdom root
set ip 11.11.11.1 255.255.255.0
set allowaccess https ping ssh
set description “Management side of the VDOM link“
next
end
end
To configure the Sales and management VDOM link:
config global
config system vdom-link
edit SalesVlnk
next
end
config system interface
edit SalesVlnk0
set vdom Sales
set ip 12.12.12.2 255.255.255.0
set allowaccess https ping ssh
set description "Sales side of the VDOM link"
next
edit SalesVlnk1
set vdom root
set ip 12.12.12.1 255.255.255.0
set allowaccess https ping ssh
set description "Management side of the VDOM link"
next
end
end
Configure the firewall and security profile
With the VDOMs, physical interfaces, and VDOM links configured, the firewall must now be configured to allow the
proper traffic. Firewalls are configured per-VDOM, and firewall objects and routes must be created for each VDOM
separately.
To configure the firewall policies from AccountingLocal to Internet:
config vdom
edit Accounting
config firewall policy
edit 1
set name "Accounting-Local-to-Management"
set srcintf port2
set dstintf AccountVlnk
set srcaddr all
FortiOS 6.4.2 Administration Guide 400
Fortinet Inc.
Network
set dstaddr all
set action accept
set schedule always
set service ALL
set nat enable
next
end
next
edit root
config firewall policy
edit 2
set name "Accounting-VDOM-to-Internet"
set srcintf AccountVlnk
set dstintf port1
set srcaddr all
set dstaddr all
set action accept
set schedule always
set service ALL
set nat enable
next
end
next
end
To configure the firewall policies from SalesLocal to the Internet:
config vdom
edit root
config firewall policy
edit 6
set name "Sales-local-to-Management"
set srcintf port2
set srcaddr all
set dstintf SalesVlnk
set dstaddr all
set schedule always
set service ALL
set action accept
set logtraffic enable
next
end
next
edit Sales
config firewall policy
edit 7
set name "Sales-VDOM-to-Internet"
set srcintf SalesVlnk
set srcaddr SalesManagement
set dstintf external
set dstaddr all
set schedule always
set service OfficeServices
set action accept
set logtraffic enable
next
FortiOS 6.4.2 Administration Guide 401
Fortinet Inc.
Network
end
next
end
Test the configuration
When the inter-VDOM routing has been configured, test the configuration to confirm proper operation.
Testing connectivity ensures that physical networking connections, FortiGate unit interface configurations, and firewall
policies are properly configured.
The easiest way to test connectivity is to use the ping and traceroute command to confirm the connectivity of
different routes on the network.
Test both from AccountingLocal to Internet and from SalesLocal to Internet.
Software switch
A software switch is a virtual switch that is implemented at the software or firmware level and not at the hardware level. A
software switch can be used to simplify communication between devices connected to different FortiGate interfaces. For
example, using a software switch, you can place the FortiGate interface connected to an internal network on the same
subnet as your wireless interfaces. Then devices on the internal network can communicate with devices on the wireless
network without any additional configuration on the FortiGate unit, such as additional security policies.
A software switch can also be useful if you require more hardware ports for the switch on a FortiGate unit. For example, if
your FortiGate unit has a 4-port switch, WAN1, WAN2, and DMZ interfaces, and you need one more port, you can create
a soft switch that can include the four-port switch and the DMZ interface, all on the same subnet. These types of
applications also apply to wireless interfaces, virtual wireless interfaces, and physical interfaces such as those in
FortiWiFi and FortiAP units.
Similar to a hardware switch, a software switch functions like a single interface. It has one IP address and all the
interfaces in the software switch are on the same subnet. Traffic between devices connected to each interface are not
regulated by security policies, and traffic passing in and out of the switch are controlled by the same policy.
When setting up a software switch, consider the following:
l Ensure that you have a back up of the configuration.
l Ensure that you have at least one port or connection, such as the console port, to connect to the FortiGate unit. If
you accidentally combine too many ports, you need a way to undo errors.
l The ports that you include must not have any link or relation to any other aspect of the FortiGate unit, such as DHCP
servers, security policies, and so on.
l For increased security, you can create a captive portal for the switch to allow only specific user groups access to the
resources connected to the switch.
Some of the difference between software and hardware switches are:
Feature Software switch Hardware switch
Processing Packets are processed in software by the Packets are processed in hardware by the
CPU. hardware switch controller, or SPU where
applicable.
STP Not Supported Supported
FortiOS 6.4.2 Administration Guide 402
Fortinet Inc.
Network
Feature Software switch Hardware switch
Wireless SSIDs Supported Not Supported
Intra-switch traffic Allowed by default. Can be explicitly set to Allowed by default.
require a policy.
To create a software switch in the GUI:
1. Go to Network > Interfaces.
2. Click Create New > Interface.
3. Set Type to Software Switch.
4. Configure the Name, Interface members, and other fields as required.
5. Click OK.
To create a software switch in the CLI:
config system switch-interface
edit <interface>
set vdom <vdom>
set member <interface_list>
set type switch
next
end
config system interface
edit <interface>
set vdom <vdom>
set type switch
set ip <ip_address>
set allowaccess https ssh ping
next
end
Sample configuration
For this example, the wireless interface (WiFi) needs to be on the same subnet as the DMZ1 interface to facilitate
wireless synchronizing from an iPhone and a local computer. Because synchronizing between two subnets is
problematic, putting both interfaces on the same subnet allows the synchronizing will work. The software switch will
accomplish this.
1. Clear the interfaces and back up the configuration:
a. Ensure the interfaces are not used for other security policy or for other use on the FortiGate unit.
b. Check the WiFi and DMZ1 ports to ensure that DHCP is not enabled and that there are no other dependencies
on these interfaces.
c. Save the current configuration so that it can be recovered if something foes wrong.
2. Merge the WiFi port and DMZ1 port to create a software switch named synchro with an IP address of 10.10.21.12
and administrative access for HTTPS, SSH and PING:
config system switch-interface
edit synchro
set vdom "root"
set type switch
FortiOS 6.4.2 Administration Guide 403
Fortinet Inc.
Network
set member dmz1 wifi
next
end
config system interface
edit synchro
set ip 10.10.21.12 255.255.255.0
set allowaccess https ssh ping
next
end
After the switch is set up, you add security policies, DHCP servers, and any other settings that are required.
Hardware switch
A hardware switch is a virtual switch interface that groups different ports together so that the FortiGate can use the group
as a single interface. Supported FortiGate models have a default hardware switch called either internal or lan. The
hardware switch is supported by the chipset at the hardware level.
Ports that are connected to the same hardware switch behave like they are on the same physical switch in the same
broadcast domain. Ports can be removed from a hardware switch and assigned to another switch or used as standalone
interfaces.
Some of the difference between hardware and software switches are:
Feature Hardware switch Software switch
Processing Packets are processed in hardware by the Packets are processed in software by the
hardware switch controller, or SPU where CPU.
applicable.
STP Supported Not Supported
Wireless SSIDs Not Supported Supported
Intra-switch traffic Allowed by default. Allowed by default. Can be explicitly set to
require a policy.
To change the ports in a hardware switch in the GUI:
1. Go to Network > Interface and edit the hardware switch.
2. Click inside the Interface members field.
FortiOS 6.4.2 Administration Guide 404
Fortinet Inc.
Network
3. Select interfaces to add or remove them from the hardware switch, then click Close. Only available interfaces will be
listed.
4. Click OK.
Removed interfaces will now be listed as standalone interfaces in the Physical Interface section.
To remove ports from a hardware switch in the CLI:
config system virtual-switch
edit "internal"
config port
delete internal2
delete internal5
...
end
next
end
To add ports to a hardware switch in the CLI:
config system virtual-switch
edit "internal"
set physical-switch "sw0"
config port
edit "internal1"
next
edit "internal3"
next
edit "internal4"
next
edit "internal6"
next
end
next
end
Zone
Zones are a group of one or more physical or virtual FortiGate interfaces that you can apply security policies to control
inbound and outbound traffic. Grouping interfaces and VLAN subinterfaces into zones simplifies the creation of security
policies where a number of network segments can use the same policy settings and protection profiles.
When you add a zone, you select the names of the interfaces and VLAN subinterfaces to add to the zone. Each interface
still has its own address. Routing is still done between interfaces, that is, routing is not affected by zones. You can use
security policies to control the flow of intra-zone traffic.
For example, in the sample configuration below, the network includes three separate groups of users representing
different entities on the company network. While each group has its own set of ports and VLANs in each area, they can
all use the same security policy and protection profiles to access the Internet. Rather than the administrator making nine
separate security policies, he can make administration simpler by adding the required interfaces to a zone and creating
three policies.
FortiOS 6.4.2 Administration Guide 405
Fortinet Inc.
Network
Sample configuration
You can configure policies for connections to and from a zone but not between interfaces in a zone. For this example,
you can create a security policy to go between zone 1 and zone 3, but not between WAN2 and WAN1, or WAN1 and
DMZ1.
To create a zone in the GUI:
1. Go to Network > Interfaces.
If VDOMs are enabled, go to the VDOM to create a zone.
2. Click Create New > Zone.
3. Configure the Name and add the Interface Members.
To configure a zone to include the internal interface and a VLAN using the CLI:
config system zone
edit Zone_1
set interface internal VLAN_1
set intrazone deny/allow
next
end
Using zone in a firewall policy
To configure a firewall policy to allow any interface to access the Internet using the CLI:
config firewall policy
edit 2
set name "2"
set srcintf "Zone_1"
set dstintf "port15"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
FortiOS 6.4.2 Administration Guide 406
Fortinet Inc.
Network
set nat enable
next
end
Intra-zone traffic
In the zone configuration you can set intrazone deny to prohibit the different interfaces in the same zone to talk to
each other.
For example, if you have ten interfaces in your zone and the intrazone setting is deny. You now want to allow traffic
between a very small number of networks on different interfaces that are part of the zone but you do not want to disable
the intra-zone blocking.
In this example, the zone VLANs are defined as: 192.168.1.0/24, 192.168.2.0/24, ... 192.168.10.0/24.
This policy allows traffic from 192.168.1.x to 192.168.2.x even though they are in the same zone and intra-zone blocking
is enabled. The intra-zone blocking acts as a default deny rule and you have to specifically override it by creating a policy
within the zone.
To enable intra-zone traffic, create the following policy:
Source Interface Zone-name, e.g., Vlans
Source Address 192.168.1.0/24
Destination Zone-name (same as Source Interface, i.e., Vlans)
Destination Address 192.168.2.0/24
Virtual Wire Pair
A virtual wire pair consists of two interfaces that do not have IP addressing and are treated like a transparent mode
VDOM. All traffic received by one interface in the virtual wire pair can only be forwarded to the other interface, provided a
virtual wire pair firewall policy allows this traffic. Traffic from other interfaces cannot be routed to the interfaces in a virtual
wire pair. Redundant and 802.3ad aggregate (LACP) interfaces can be included in a virtual wire pair.
Virtual wire pairs are useful for a typical topology where MAC addresses do not behave normally. For example, port
pairing can be used in a Direct Server Return (DSR) topology where the response MAC address pair may not match the
request’s MAC address pair.
Example
In this example, a virtual wire pair (port3 and port4) makes it easier to protect a web server that is behind a FortiGate
operating as an Internal Segmentation Firewall (ISFW). Users on the internal network access the web server through the
ISFW over the virtual wire pair.
Interfaces used in a virtual wire pair cannot be used to access the ISFW FortiGate. Before
creating a virtual wire pair, make sure you have a different port configured to allow admin
access using your preferred protocol.
FortiOS 6.4.2 Administration Guide 407
Fortinet Inc.
Network
To add a virtual wire pair using the CLI:
config system virtual-wire-pair
edit "VWP-name"
set member "port3" "port4"
set wildcard-vlan disable
next
end
To add a virtual wire pair using the GUI:
1. Go to Network > Interfaces.
2. Click Create New > Virtual Wire Pair.
3. Select the Interface Members to add to the virtual wire pair.
These interfaces cannot be part of a switch, such as the default LAN/internal interface.
4. If required, enable Wildcard VLAN and set the VLAN Filter.
5. Click OK.
To create a virtual wire pair policy using the CLI:
config firewall policy
edit 1
set name "VWP-Policy"
set srcintf "port3" "port4"
set dstintf "port3" "port4"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set utm-status enable
set fsso disable
next
end
To create a virtual wire pair policy using the GUI:
1. Go to Policy & Objects > Firewall Virtual Wire Pair Policy.
2. Click Create New.
3. Select the direction that traffic is allowed to flow.
4. Configure the other fields.
5. Click OK.
FortiOS 6.4.2 Administration Guide 408
Fortinet Inc.
Network
Virtual switch support for FortiGate 300E series
On the FortiGate 300E series, switch ports can be assigned to different VLANs.
To create a VLAN switch in the GUI:
1. Go to Network > Interfaces and enable VLAN Switch Mode.
2. Click Create New > Interface.
3. Enter an interface name and configure the following:
a. For Type, select VLAN Switch.
b. (Optional) Enter a VLAN ID (range is 3900–3999).
c. If applicable, select a Virtual Domain.
d. Add the Interface Members.
e. Configure the Address and Administrative Access settings as needed.
4. Click OK.
The new VLAN switch is visible in the interface table:
FortiOS 6.4.2 Administration Guide 409
Fortinet Inc.
Network
To create a VLAN switch in the CLI:
1. Enable VLAN switch mode:
config system global
set virtual-switch-vlan enable
end
2. Create the VLAN switch. Optionally, you can assign an ID to the VLAN:
The default ID is 0. You can use the default ID, or you can assign an ID to the VLAN (3900–3999).
config system virtual-switch
edit "VLAN switch"
set physical-switch "sw0"
set vlan 3900
config port
edit "port1"
next
edit "port3"
next
end
next
end
3. Configure the VLAN switch interface:
config system interface
edit "VLAN switch"
set vdom "vdom1"
set ip 6.6.6.1 255.255.255.0
set allowaccess ping https ssh snmp http fgfm
set type hard-switch
set snmp-index 15
next
end
4. (Optional) Create a trunk interface:
config system interface
edit port2
FortiOS 6.4.2 Administration Guide 410
Fortinet Inc.
Network
set trunk enable
next
end
Failure detection for aggregate and redundant interfaces
When an aggregate or redundant interface goes down, the corresponding fail-alert interface changes to down. When an
aggregate or redundant interface comes up, the corresponding fail-alert interface changes to up.
Fail-detect for aggregate and redundant interfaces can be configured using the CLI.
To configure an aggregate interface so that port3 goes down with it:
config system interface
edit "agg1"
set vdom "root"
set fail-detect enable
set fail-alert-method link-down
set fail-alert-interfaces "port3"
set type aggregate
set member "port1" "port2"
next
end
To configure a redundant interface so that port4 goes down with it:
config system interface
edit "red1"
set vdom "root"
set fail-detect enable
set fail-alert-method link-down
set fail-alert-interfaces "port4"
set type redundant
set member "port1" "port2"
next
end
VLAN inside VXLAN
VLANs can be assigned to VXLAN interfaces. In a data center network where VXLAN is used to create an L2 overlay
network and for multitenant environments, a customer VLAN tag can be assigned to VXLAN interface. This allows the
VLAN tag from VLAN traffic to be encapsulated within the VXLAN packet.
FortiOS 6.4.2 Administration Guide 411
Fortinet Inc.
Network
To configure VLAN inside VXLAN on HQ1:
1. Configure VXLAN:
config system vxlan
edit "vxlan1"
set interface port1
set vni 1000
set remote-ip 173.1.1.1
next
end
2. Configure system interface:
config system interface
edit vlan100
set vdom root
set vlanid 100
set interface dmz
next
edit vxlan100
set type vlan
set vlanid 100
set vdom root
set interface vxlan1
next
end
3. Configure software-switch:
config system switch-interface
edit sw1
set vdom root
set member vlan100 vxlan100
set intra-switch-policy implicit
next
end
The default intra-switch-policy implicit behavior allows traffic between member
interfaces within the switch. Therefore, it is not necessary to create firewall policies to allow
this traffic.
Instead of creating a software-switch, it is possible to use a virtual-wire-pair as well. See
Virtual Wire Pair with VXLAN on page 414.
FortiOS 6.4.2 Administration Guide 412
Fortinet Inc.
Network
To configure VLAN inside VXLAN on HQ2:
1. Configure VXLAN:
config system vxlan
edit "vxlan2"
set interface port25
set vni 1000
set remote-ip 173.1.1.2
next
end
2. Configure system interface:
config system interface
edit vlan100
set vdom root
set vlanid 100
set interface port20
next
edit vxlan100
set type vlan
set vlanid 100
set vdom root
set interface vxlan2
next
end
3. Configure software-switch:
config system switch-interface
edit sw1
set vdom root
set member vlan100 vxlan100
next
end
To verify the configuration:
Ping PC1 from PC2.
The following is captured on HQ2:
This captures the VXLAN traffic between 172.1.1.1 and 172.1.1.2 with the VLAN 100 tag inside.
FortiOS 6.4.2 Administration Guide 413
Fortinet Inc.
Network
Virtual Wire Pair with VXLAN
Virtual wire pairs can be used with VXLAN interfaces.
In this examples, VXLAN interfaces are added between FortiGate HQ1 and FortiGate HQ2, a virtual wire pair is added in
HQ1, and firewall policies are created on both HQ1 and HQ2.
To create VXLAN interface on HQ1:
config system interface
edit "port11"
set vdom "root"
set ip 10.2.2.1 255.255.255.0
set allowaccess ping https ssh snmp telnet
next
end
config system vxlan
edit "vxlan1"
set interface "port11"
set vni 1000
set remote-ip "10.2.2.2"
next
end
To create VXLAN interface on HQ2:
config system interface
edit "port11"
set vdom "root"
set ip 10.2.2.2 255.255.255.0
set allowaccess ping https ssh snmp http
next
end
config system vxlan
edit "vxlan1"
set interface "port11"
set vni 1000
set remote-ip "10.2.2.1"
next
end
config system interface
edit "vxlan1"
set vdom "root"
set ip 10.1.100.2 255.255.255.0
set allowaccess ping https ssh snmp
FortiOS 6.4.2 Administration Guide 414
Fortinet Inc.
Network
next
end
To create a virtual wire pair on HQ1:
config system virtual-wire-pair
edit "vwp1"
set member "port10" "vxlan1"
next
end
To create a firewall policy on HQ1:
config firewall policy
edit 5
set name "vxlan-policy"
set srcintf "port10" "vxlan1"
set dstintf "port10" "vxlan1"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set utm-status enable
set ssl-ssh-profile "certificate-inspection"
set av-profile "default"
set webfilter-profile "default"
set dnsfilter-profile "default"
set ips-sensor "default"
set application-list "default"
set fsso disable
next
end
To create a firewall policy on HQ2:
config firewall policy
edit 5
set name "1"
set srcintf "port13"
set dstintf "vxlan1"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set fsso disable
set nat enable
next
end
FortiOS 6.4.2 Administration Guide 415
Fortinet Inc.
Network
QinQ
QinQ (802.1ad) allows multiple VLAN tags to be inserted into a single frame, and can be configured on supported
FortiGate devices.
In this example, the customer connects to a provider that uses 802.1ad double-tagging to separate their customer
VLANs. The FortiGate connecting to the provider double-tags its frames with an outer provider-tag (S-Tag) and an inner
customer-tag (C-Tag).
The customer identifies itself with the provider-tag (S-Tag) 232 and uses the customer-tag (C-Tag) 444 for traffic to its
VLAN.
To configure the interfaces:
1. Configure the interface to the provider that uses the outer tag (S-Tag):
config system interface
edit "vlan-8021ad"
set vdom "root"
set vlan-protocol 8021ad
set device-identification enable
set role lan
set snmp-index 47
set interface "PORT"
set vlanid 232
next
end
2. Configure a dynamic VLAN interface that uses the inner tag (C-Tag):
config system interface
edit "DVLAN"
set vdom "vdom1"
set device-identification enable
set role lan
set snmp-index 48
set interface "vlan-8021ad"
set vlanid 444
next
end
Assign a subnet with the FortiIPAM service
The FortiIPAM (IP Address Management) service automatically assigns subnets to FortiGate to prevent duplicate
IP addresses from overlapping within the same Security Fabric.
After the FortiIPAM registration is synced to FortiGuard from FortiCare, FortiGate can use FortiIPAM to automatically
assign IP addresses based on the configured network size for the FortiGate interface.
FortiOS 6.4.2 Administration Guide 416
Fortinet Inc.
Network
Requirements:
Register the FortiIPAM service for FortiGate in FortiCare.
FortiIPAM is a paid service.
To verify the FortiIPAM service registration in the GUI:
1. Go to System > FortiGuard to verify the FortiIPAM service is registered. If the service is registered, the FortiIPAM
area at the bottom of the page displays a check mark as well as the license expiry date.
Example
In this example, you will configure port5 on FortiGate Root to be managed by FortiIPAM and specify the network size.
Next you will enable DHCP on the interface to supply IP addresses to this network.
Once FortiIPAM is designated as the IP source, you will configure the port5 interface on FortiGate Downstream to obtain
an IP from DHCP to connect it to FortiGate Root and add it to the Security Fabric. Lastly, you will use FortiIPAM to
assign IP addresses to the Internal Network.
FortiOS 6.4.2 Administration Guide 417
Fortinet Inc.
Network
1. On FortiGate Root, edit port5 and configure the interface to be managed by FortiIPAM.
a. Go to Network > Interfaces, and double-click port5 to edit it. The Edit Interface window opens.
b. From the Role dropdown, select LAN.
c. In the Addressing mode area, select Auto-managed by FortiIPAM. An information icon appears next to
IP/Netmask and below the Network Size dropdown indicating FortiIPAM will allocate an IP subnet with the
selected size.
d. From the Network Size dropdown, select the size of the network segment for this interface.
e. Enable DHCP Server to allow the interface to supply IP addresses to this network.
You do not need to configure Address range and Netmask. These will be configured by FortiIPAM.
f. Click OK. Port5 gets an IP address from FortiIPAM corresponding to the network size. It will also start assigning
addresses through DHCP. Refresh this page if an IP has not been assigned.
2. View the IP allocation map.
a. Go to Network > Interfaces, and double-click port5 to view it.
b. In the IP/Netmask area, click Show Global IP Allocation Map. You are redirected to FortiCloud.
c. Click Login. The FortiIPAM portal opens. The List View displays the assigned IP entries.
d. Double-click an IP entry and click the Source tab. The IP source appears in the Device column. The Interface
FortiOS 6.4.2 Administration Guide 418
Fortinet Inc.
Network
column displays the port. Assign Type displays Auto. Last Updated displays the assign time.
3. On FortiGate Root go to Network > Interfaces. The DHCP Server settings are configured automatically.
4. On FortiGate Downstream, configure port5 to obtain an IP from DHCP.
a. Go to System > FortiGuard, and verify FortiIPAM is licensed.
b. Go to Network > Interfaces, and double click port5 to edit it.
c. In the Addressing mode area, select DHCP and click OK. The interface will get its IP address from the DHCP
server configured on FortiGate Root.
d. In Network > Interfaces, double-click port5. The following fields appear in the Address area:
l Status.
l Obtained IP/Netmask
l Expiry Date
l Acquired DNS
5. Add FortiGate Downstream to the Security Fabric.
a. Go to Security Fabric > Fabric Connectors. In the Security Fabric Settings area, set Status to Enabled.
b. In the Upstream FortiGate IP field, enter the IP address for FortiGate Root, and click OK. The Topology pane
FortiOS 6.4.2 Administration Guide 419
Fortinet Inc.
Network
shows the connection is established.
6. On FortiGate Downstream, configure port6 to use FortiIPAM.
a. Go to Network > Interfaces. Double-click port6 to edit it.
b. From the Role dropdown, select LAN.
c. In the Address mode area, select Auto-managed by FortiIPAM.
d. From the Network size dropdown, select a different network size. In this example, the network size was
increased to 512.
e. Wait a while and then double-click port6. The IP/Netmask is auto-populated.
f. Enable DHCP Server to allow the interface to supply IP addresses to this network.
7. Go back to the FortiIPAM portal in FortiCloud.
a. The List View tab shows the IP addresses for the downstream FortiGates.
b. Select a subnet, and click the Source tab. The source details show that the IP is different from the root
FortiGate, preventing conflicts.
FortiOS 6.4.2 Administration Guide 420
Fortinet Inc.
Network
To view the FortiIPAM service details in the CLI:
Use the diagnose command to view the FortiIPAM service information in FortiGate.
Root-E (global) # diagnose test update info
...
System contracts:
...
IPMC,Thu Apr 15 17:00:00 2021
You can also use the REST API to get the FortiIPAM service information.
https://172.16.116.xxx/api/v2/monitor/license/status
..."fortiipam_cloud":{
"type":"live_cloud_service",
"status":"licensed",
"expires":1618531200,
"entitlement":"IPMC"
}
To configure FortiIPAM in the CLI:
1. On FortiGate Root , edit port5 and configure the interface to be managed by FortiIPAM. Use managed-
subnetwork-size to specify the network size of the network segment for this interface.
In this example, the network size 256.
config system interface
edit "port5"
set ip-managed-by-fortiipam enable
set managed-subnetwork-size 256
next
end
FortiOS 6.4.2 Administration Guide 421
Fortinet Inc.
Network
2. On the same interface, enable DHCP server on this interface to supply IP addresses to this network.
No configuration is required unless you need to change the defaults.
config system dhcp server
edit 1
set interface "port5"
set dhcp-settings-from-fortiipam enable
next
end
3. Once FortiIPAM completes the address configuration, the configurations will appear as follows:
show system interface
...
edit "port5"
set vdom "root"
set ip 10.128.6.1 255.255.255.0
set allowaccess ping https ssh http fabric
set type physical
set device-identification enable
set lldp-transmission enable
set role lan
set snmp-index 5
set ip-managed-by-fortiipam enable
next
...
end
show system dhcp server
edit 1
set dns-service default
set default-gateway 10.128.6.1
set netmask 255.255.255.0
set interface "port5"
config ip-range
edit 1
set start-ip 10.128.6.1
set end-ip 10.128.6.254
next
end
set dhcp-settings-from-fortiipam enable
config exclude-range
edit 1
set start-ip 10.128.6.1
set end-ip 10.128.6.1
next
end
next
end
4. On FortiGate Downstream, configure port5 to obtain an IP from DHCP.
config system interface
edit "port5"
set mode dhcp
next
end
FortiOS 6.4.2 Administration Guide 422
Fortinet Inc.
Network
5. After the IP is assigned and the device is connected to FortiGate Root , add FortiGate Downstream to the Security
Fabric.
6. Once FortiGate Downstream is connected to the Security Fabric, you can configure the port6 interface to use the
FortiIPAM service as well.
7. On FortiGate Downstream , set the interface to be managed by the FortiIPAM service, and increase the managed-
subnetwork-size value.
In this example, the network size was increased to 512.
config system interface
edit "port5"
set ip-managed-by-fortiipam enable
set managed-subnetwork-size 512
next
end
8. Configure the DHCP server on this port to assign IP addresses to this subnet.
config system dhcp server
edit 1
set interface "port6"
set dhcp-settings-from-fortiipam enable
next
end
9. Go to the FortiIPAM Portal to view the IP addresses.
Configure a VRF ID on an interface
From the Network > Interfaces page, users can configure VRF (virtual routing and forwarding) IDs directly on the
interface. The VRF IDs can be displayed in the routing monitor and can be used to create blackhole static routes.
VRF allows multiple routing table instances to co-exist on the same router. One or more interfaces may have a VRF, and
packets are only forwarded between interfaces with the same VRF.
Enable Advanced Routing in System > Feature Visibility to use this feature.
FortiOS 6.4.2 Administration Guide 423
Fortinet Inc.
Network
To configure a VRF ID in the GUI:
1. Configure the interface:
a. Go to Network > Interfaces and click Create New > Interface.
b. Enter a value in the VRF ID field.
c. Configure the other settings as needed.
d. Click OK.
e. To add the VRF column in the interface table, click the gear icon, select VRF, and click Apply.
FortiOS 6.4.2 Administration Guide 424
Fortinet Inc.
Network
2. Add a blackhole static route using the VRF ID:
a. Go to Network > Static Routes and click Create New.
b. Enter the subnet.
c. In the Interface field, select Blackhole.
d. In the VRF ID field, enter the ID you created in step 1.
e. Click OK.
To configure a VRF ID in the CLI:
1. Configure the interface:
config system interface
edit test_interface
...
set vrf 14
next
end
2. Add a blackhole static route using the VRF ID:
config router static
edit 3
set dst 8.8.8.8 255.255.255.255
set blackhole enable
set vrf 14
next
end
DNS
Domain name system (DNS) is used by devices to locate websites by mapping a domain name to a website’s IP
address.
A FortiGate can serve different roles based on user requirements:
l A FortiGate can control what DNS server a network uses.
l A FortiGate can function as a DNS server.
FortiGuard Dynamic DNS (DDNS) allows a remote administrator to access a FortiGate's Internet-facing interface using a
domain name that remains constant even when its IP address changes.
FortiOS supports DNS configuration for both IPv4 and IPv6 addressing. When a user requests a website, the FortiGate
looks to the configured DNS servers to provide the IP address of the website in order to know which server to contact to
complete the transaction.
FortiOS 6.4.2 Administration Guide 425
Fortinet Inc.
Network
The FortiGate queries the DNS servers whenever it needs to resolve a domain name into an IP address, such as for NTP
or web servers defined by their domain names.
The following topics provide information about DNS:
l Important DNS CLI commands on page 426
l DNS domain list on page 427
l FortiGate DNS server on page 429
l DDNS on page 431
l DNS latency information on page 434
l DNS over TLS on page 436
l DNS troubleshooting on page 437
Important DNS CLI commands
DNS settings can be configured with the following CLI command:
config system dns
set primary <ip_address>
set secondary <ip_address>
set dns-over-tls {enable | disable | enforce}
set ssl-certificate <string>
set domain <domains>
set ip6-primary <ip6_address>
set ip6-secondary <ip6_address>
set timeout <integer>
set retry <integer>
set dns-cache-limit <integer>
set dns-cache-ttl <integer>
set cache-notfound-responses {enable | disable}
set source-ip <class_ip>
end
For a FortiGate with multiple logical CPUs, you can set the DNS process number from 1 to the number of logical CPUs.
The default DNS process number is 1.
config system global
set dnsproxy-worker-count <integer>
end
dns-over-tls
DNS over TLS (DoT) is a security protocol for encrypting and wrapping DNS queries and answers via the Transport
Layer Security (TLS) protocol. It can be enabled, disabled, or enforced:
l disable: Disable DNS over TLS (default).
l enable: Use TLS for DNS queries if TLS is available.
l enforce: Use only TLS for DNS queries. Does not fall back to unencrypted DNS queries if TLS is unavailable.
For more information, see DNS over TLS on page 436.
FortiOS 6.4.2 Administration Guide 426
Fortinet Inc.
Network
cache-notfound-responses
When enabled, any DNS requests that are returned with NOT FOUND can be stored in the cache. The DNS server is not
asked to resolve the host name for NOT FOUND entries. By default, this option is disabled.
dns-cache-limit
Set the number of DNS entries that are stored in the cache (0 to 4294967295, default = 5000). Entries that remain in the
cache provide a quicker response to requests than going out to the Internet to get the same information.
dns-cache-ttl
The duration that the DNS cache retains information, in seconds (60 to 86400 (1 day), default = 1800).
DNS domain list
You can configure up to eight domains in the DNS settings using the GUI or the CLI.
When a client requests a URL that does not include an FQDN, FortiOS resolves the URL by traversing through the DNS
domain list and performing a query for each domain until the first match is found.
By default, FortiGate uses FortiGuard's DNS servers:
l Primary: 208.91.112.53
l Secondary: 208.91.112.52
You can also customize the DNS timeout time and the number of retry attempts.
To configure a DNS domain list in the GUI:
1. Go to Network > DNS.
2. Set DNS Servers to Specify.
3. Configure the primary and secondary DNS servers as needed.
4. In the Local Domain Name field, enter the first domain (sample.com in this example).
5. Click the + to add more domains (example.com and domainname.com in this example). You can enter up to eight
domains.
FortiOS 6.4.2 Administration Guide 427
Fortinet Inc.
Network
6. Configure additional DNS settings as needed.
7. Click Apply.
To configure a DNS domain list in the CLI:
config system dns
set primary 172.16.200.1
set domain "sample.com" "example.com" "domainname.com"
end
Verify the DNS configuration
In the following example, the local DNS server has the entry for host1 mapped to the FQDN of host1.sample.com, and
the entry for host2 is mapped to the FQDN of host2.example.com.
To verify that the DNS domain list is configured:
1. Open Command Prompt.
2. Enter ping host1.
The system returns the following response:
PING host1.sample.com (1.1.1.1): 56 data bytes
As the request does not include an FQDN, FortiOS traverses the configured DNS domain list to find a match.
Because host1 is mapped to the host1.sample.com, FortiOS resolves host1 to sample.com, the first entry in the
domain list.
3. Enter ping host2.
The system returns the following response:
PING host2.example.com (2.2.2.2): 56 data bytes
FortiOS traverses the domain list to find a match. It first queries sample.com, the first entry in the domain list, but
does not find a match. It then queries the second entry in the domain list, example.com. Because host2 is mapped
to the FQDN of host2.example.com, FortiOS resolves host2 to example.com.
DNS timeout and retry settings
The DNS timeout and retry settings can be customized using the CLI.
FortiOS 6.4.2 Administration Guide 428
Fortinet Inc.
Network
config system dns
set timeout <integer>
set retry <integer>
end
Variable Description
timeout <integer> The DNS query timeout interval, in seconds (1 - 10, default = 5).
retry <integer> The number of times to retry the DNS query (0 - 5, default - 2).
FortiGate DNS server
You can create local DNS servers for your network. Depending on your requirements, you can either manually maintain
your entries (primary DNS server), or use it to refer to an outside source (secondary DNS server).
A local, primary DNS server requires that you to manually add all URL and IP address combinations. Using a primary
DNS server for local services can minimize inbound and outbound traffic, and access time. Making it authoritative is not
recommended, because IP addresses can change, and maintaining the list can become labor intensive.
A secondary DNS server refers to an alternate source to obtain URL and IP address combinations. This is useful when
there is a primary DNS server where the entry list is maintained.
FortiGate as a DNS server also supports TLS connections to a DNS client. See DNS over TLS on page 436 for details.
By default, DNS server options are not available in the FortiGate GUI.
To enable DNS server options in the GUI:
1. Go to System > Feature Visibility.
2. Enable DNS Database in the Additional Features section.
3. Click Apply.
Example configuration
This section describes how to create an unauthoritative primary DNS server. The interface mode is recursive so that, if
the request cannot be fulfilled, the external DNS servers will be queried.
To configure FortiGate as a primary DNS server in the GUI:
1. Go to Network > DNS Servers.
2. In the DNS Database table, click Create New.
3. Set Type to Primary.
4. Set View to Shadow.
The View setting controls the accessibility of the DNS server. If you select Public, external users can access or use
the DNS server. If you select Shadow, only internal users can use it.
5. Enter a DNS Zone, for example, WebServer.
6. Enter the Domain Name of the zone, for example, fortinet.com.
7. Enter the Hostname of the DNS server, for example, Corporate.
8. Enter the Contact Email Address for the administrator, for example, [email protected].
FortiOS 6.4.2 Administration Guide 429
Fortinet Inc.
Network
9. Disable Authoritative.
10. Add DNS entries:
a. In the DNS Entries table, click Create New.
b. Select a Type, for example Address (A).
c. Set the Hostname, for example web.example.com.
d. Configure the remaining settings as needed. The options vary depending on the selected Type.
e. Click OK.
11. Add more DNS entries as needed.
12. Click OK.
13. Enable DNS services on an interface:
a. Go to Network > DNS Servers.
b. In the DNS Service on Interface table, click Create New.
c. Select the Interface for the DNS server, such as wan2.
d. Set the Mode to Recursive.
e. Click OK.
To configure FortiGate as a primary DNS server in the CLI:
config system dns-database
edit WebServer
set domain example.com
set type master
FortiOS 6.4.2 Administration Guide 430
Fortinet Inc.
Network
set view shadow
set ttl 86400
set primary-name corporate
set contact [email protected]
set authoritative disable
config dns-entry
edit 1
set hostname web.example.com
set type A
set ip 192.168.21.12
set status enable
next
end
next
end
config system dns-server
edit wan1
set mode recursive
next
end
DDNS
If your external IP address changes regularly and you have a static domain name, you can configure the external
interface to use a dynamic DNS (DDNS) service. This ensures that external users and customers can always connect to
your company firewall. If you have a FortiGuard subscription, you can use FortiGuard as the DDNS server.
l FortiGate does not support DDNS for pure TP mode.
l FortiGate models 1000D and higher do not support DDNS in the GUI.
You can configure FortiGuard as the DDNS server using the GUI or CLI.
Sample topology
FortiOS 6.4.2 Administration Guide 431
Fortinet Inc.
Network
In this example, FortiGuard DDNS is enabled and the DDNS server is set to float-zone.com. Other DDNS server options
include fortiddns.com and fortidyndns.com.
To configure FortiGuard as the DDNS server in the GUI:
1. Go to Network > DNS
2. Enable FortiGuard DDNS.
3. Select the Interface with the dynamic connection.
4. Select the Server that you have an account with.
5. Enter your Unique Location.
6. Click Apply.
To configure FortiGuard as the DDNS server in the CLI:
config system ddns
edit 1
set ddns-server FortiGuardDDNS
set ddns-domain "branch.float-zone.com"
set monitor-interface "wan1"
next
end
DDNS servers other than FortiGuard
If you do not have a FortiGuard subscription, or want to use a different DDNS server, you can configure a DDNS server
for each interface. Only the first configure port appears in the GUI. The available commands vary depending on the
selected DDNS server.
To configure DDNS servers other than FortiGuard in the CLI:
config system ddns
edit <DDNS_ID>
set monitor-interface <external_interface>
set ddns-server <ddns_server_selection>
...
next
end
FortiOS 6.4.2 Administration Guide 432
Fortinet Inc.
Network
Refresh DDNS IP addresses
You can configure FortiGate to refresh DDNS IP addresses. FortiGate periodically checks the DDNS server that is
configured.
To configure FortiGate to refresh DDNS IP addresses using the CLI:
config system ddns
edit 1
set ddns-server FortiGuardDDNS
set use-public-ip enable
set update-interval seconds
next
end
Disable cleartext
When clear-text is disabled, FortiGate uses the SSL connection to send and receive (DDNS) updates.
To disable cleartext and set the SSL certificate using the CLI:
config system ddns
edit <1>
set clear-text disable
set ssl-certificate <cert_name>
next
end
DDNS update override
A DHCP server has an override command option that allows DHCP server communications to go through DDNS to
perform updates for the DHCP client. This enforces a DDNS update of the A field every time even if the DHCP client
does not request it. This allows support for the allow, ignore, and deny client-updates options.
To enable DDNS update override using the CLI:
config system dhcp server
edit 1
set ddns-update enable
set ddns-update_override enable
set ddns-server-ip <ddns_server_ip>
set ddns-zone <ddns_zone>
next
end
FortiOS 6.4.2 Administration Guide 433
Fortinet Inc.
Network
Troubleshooting
To debug DDNS:
# diagnose debug application ddnscd -1
# diagnose debug enable
To check if a DDNS server is available:
# diagnose test application ddnscd 3
Not available:
FortiDDNS status:
ddns_ip=0.0.0.0 ddns_port=443 svr_num=0 domain_num=0
Available:
FortiDDNS status:
ddns_ip=208.91.113.230 ddns_port=443 svr_num=1 domain_num=3
svr[0]= 208.91.113.230
domain[0]= fortiddns.com
domain[1]= fortidyndns.com
domain[2]= float-zone.com
DNS latency information
High latency in DNS traffic can result in an overall sluggish experience for end-users. In the DNS Settings pane, you can
quickly identify DNS latency issues in your configuration.
Go to Network > DNS to view DNS latency information in the right side bar. If you use FortiGuard DNS, latency
information for DNS, DNS filter, web filter, and outbreak prevention servers is also visible. Hover your pointer over a
latency value to see when it was last updated.
To view DNS latency information using the CLI:
# diagnose test application dnsproxy 2
worker idx: 0
worker: count=1 idx=0
retry_interval=500 query_timeout=1495
DNS latency info:
vfid=0 server=2001::1 latency=1494 updated=73311
vfid=0 server=208.91.112.52 latency=1405 updated=2547
FortiOS 6.4.2 Administration Guide 434
Fortinet Inc.
Network
vfid=0 server=208.91.112.53 latency=19 updated=91
SDNS latency info:
vfid=0 server=173.243.138.221 latency=1 updated=707681
DNS_CACHE: alloc=35, hit=26
RATING_CACHE: alloc=1, hit=49
DNS UDP: req=66769 res=63438 fwd=83526 alloc=0 cmp=0 retrans=16855 to=3233
cur=111 switched=8823467 num_switched=294 v6_cur=80 v6_switched=7689041 num_v6_
switched=6
ftg_res=8 ftg_fwd=8 ftg_retrans=0
DNS TCP: req=0, res=0, fwd=0, retrans=0 alloc=0, to=0
FQDN: alloc=45 nl_write_cnt=9498 nl_send_cnt=21606 nl_cur_cnt=0
Botnet: searched=57 hit=0 filtered=57 false_positive=0
To view the latency from web filter and outbreak protection servers using the CLI:
# diagnose debug rating
Locale : english
Service : Web-filter
Status : Enable
License : Contract
Service : Antispam
Status : Disable
Service : Virus Outbreak Prevention
Status : Disable
-=- Server List (Tue Jan 22 08:03:14 2019) -=-
IP Weight RTT Flags TZ Packets Curr Lost Total Lost Updated Time
173.243.138.194 10 0 DI -8 700 0 2 Tue Jan 22 08:02:44
2019
173.243.138.195 10 0 -8 698 0 4 Tue Jan 22 08:02:44
2019
173.243.138.198 10 0 -8 698 0 4 Tue Jan 22 08:02:44
2019
173.243.138.196 10 0 -8 697 0 3 Tue Jan 22 08:02:44
2019
173.243.138.197 10 1 -8 694 0 0 Tue Jan 22 08:02:44
2019
96.45.33.64 10 22 D -8 701 0 6 Tue Jan 22 08:02:44
2019
64.26.151.36 40 62 -5 704 0 10 Tue Jan 22 08:02:44
2019
64.26.151.35 40 62 -5 703 0 9 Tue Jan 22 08:02:44
2019
209.222.147.43 40 70 D -5 696 0 1 Tue Jan 22 08:02:44
2019
66.117.56.42 40 70 -5 697 0 3 Tue Jan 22 08:02:44
2019
66.117.56.37 40 71 -5 702 0 9 Tue Jan 22 08:02:44
2019
65.210.95.239 40 74 -5 695 0 1 Tue Jan 22 08:02:44
2019
65.210.95.240 40 74 -5 695 0 1 Tue Jan 22 08:02:44
FortiOS 6.4.2 Administration Guide 435
Fortinet Inc.
Network
2019
45.75.200.88 90 142 0 706 0 12 Tue Jan 22 08:02:44
2019
45.75.200.87 90 155 0 714 0 20 Tue Jan 22 08:02:44
2019
45.75.200.85 90 156 0 711 0 17 Tue Jan 22 08:02:44
2019
45.75.200.86 90 159 0 704 0 10 Tue Jan 22 08:02:44
2019
62.209.40.72 100 157 1 701 0 7 Tue Jan 22 08:02:44
2019
62.209.40.74 100 173 1 705 0 11 Tue Jan 22 08:02:44
2019
62.209.40.73 100 173 1 699 0 5 Tue Jan 22 08:02:44
2019
121.111.236.179 180 138 9 706 0 12 Tue Jan 22 08:02:44
2019
121.111.236.180 180 138 9 704 0 10 Tue Jan 22 08:02:44
2019
DNS over TLS
DNS over TLS (DoT) is a security protocol for encrypting and wrapping DNS queries and answers via the TLS protocol.
The goal of DNS over TLS is to increase user privacy and security by preventing eavesdropping and manipulation of
DNS data via man-in-the-middle attacks. There is an option in the FortiOS DNS profile settings to enforce DoT for this
added security.
To configure DoT in the GUI:
1. Go to Network > DNS. The DNS Settings pane opens.
2. For DNS over TLS, click Enforce.
3. Click Apply.
To configure DoT in the CLI:
config system dns
set primary 8.8.8.8
set dns-over-tls enforce
set ssl-certificate "Fortinet_Factory"
end
FortiOS 6.4.2 Administration Guide 436
Fortinet Inc.
Network
FortiGuard DNS rating service
DNS over TLS connections to the FortiGuard secure DNS server is supported. The CLI options are only available when
fortiguard-anycast is enabled. DNS filtering connects to the FortiGuard secure DNS server over anycast by
default.
To configure DoT to the secure DNS server in the CLI:
config system fortiguard
set fortiguard-anycast enable
set fortiguard-anycast-source fortinet
set anycast-sdns-server-ip 0.0.0.0
set anycast-sdns-server-port 853
end
DNS troubleshooting
The following diagnose command can be used to collect DNS debug information. If you do not specify worker ID, the
default worker ID is 0.
# diagnose test application dnsproxy
worker idx: 0
1. Clear DNS cache
2. Show stats
3. Dump DNS setting
4. Reload FQDN
5. Requery FQDN
6. Dump FQDN
7. Dump DNS cache
8. Dump DNS DB
9. Reload DNS DB
10. Dump secure DNS policy/profile
11. Dump Botnet domain
12. Reload Secure DNS setting
13. Show Hostname cache
14. Clear Hostname cache
15. Show SDNS rating cache
16. Clear SDNS rating cache
17. DNS debug bit mask
99. Restart dnsproxy worker
To view useful information about the ongoing DNS connection:
# diagnose test application dnsproxy 3
Important fields include:
tls 1 if the connection is TLS, 0 if the connection is not TLS.
rt The round trip time of the DNS latency.
probe The number of probes sent.
FortiOS 6.4.2 Administration Guide 437
Fortinet Inc.
Network
To dump the second DNS worker's cache:
diagnose test application dnsproxy 7 1
To enable debug on the second worker:
diagnose debug application dnsproxy -1 1
To enable debug on all workers by specifying -1 as worker ID:
diagnose debug application dnsproxy -1 -1
Explicit and transparent proxies
This section contains instructions for configuring explicit and transparent proxies.
l Explicit web proxy on page 438
l Transparent proxy on page 443
l FTP proxy on page 441
l Proxy policy addresses on page 446
l Proxy policy security profiles on page 454
l Explicit proxy authentication on page 460
l Transparent web proxy forwarding on page 465
l Upstream proxy authentication in transparent proxy mode on page 466
l Multiple dynamic header count on page 468
l Restricted SaaS access (Office 365, G Suite, Dropbox) on page 471
l Explicit proxy and FortiSandbox Cloud on page 473
l Proxy chaining (web proxy forwarding servers) on page 476
l Agentless NTLM authentication for web proxy on page 481
Explicit web proxy
Explicit web proxy can be configured on FortiGate for proxying HTTP and HTTPS traffic.
To deploy explicit proxy, individual client browsers can be manually configured to send requests directly to the proxy, or
they can be configured to download proxy configuration instructions from a Proxy Auto-Configuration (PAC) file.
When explicit proxy is configured on an interface, the interface IP address can be used by client browsers to forward
requests directly to the FortiGate. FortiGate also supports PAC file configuration.
To configure explicit web proxy in the GUI:
1. Enable and configure explicit web proxy:
a. Go to Network > Explicit Proxy.
b. Enable Explicit Web Proxy.
c. Select port2 as the Listen on Interfaces and set the HTTP Port to 8080.
FortiOS 6.4.2 Administration Guide 438
Fortinet Inc.
Network
d. Configure the remaining settings as needed.
e. Click Apply.
2. Create an explicit web proxy policy:
a. Go to Policy & Objects > Proxy Policy.
b. Click Create New.
c. Set Proxy Type to Explicit Web and Outgoing Interface to port1.
FortiOS 6.4.2 Administration Guide 439
Fortinet Inc.
Network
d. Also set Source and Destination to all, Schedule to always, Service to webproxy, and Action to ACCEPT.
e. Click OK to create the policy.
This example creates a basic policy. If required, security profiles can be enabled, and deep
SSL inspection can be selected to inspect HTTPS traffic.
3. Configure a client to use the FortiGate explicit proxy:
Set the FortiGate IP address as the proxy IP address in the browser, or use an automatic configuration script for the
PAC file.
To configure explicit web proxy in the CLI:
1. Enable and configure explicit web proxy:
config web-proxy explicit
set status enable
set ftp-over-http enable
set socks enable
set http-incoming-port 8080
set ipv6-status enable
set unknown-http-version best-effort
end
config system interface
FortiOS 6.4.2 Administration Guide 440
Fortinet Inc.
Network
edit "port2"
set vdom "vdom1"
set ip 10.1.100.1 255.255.255.0
set allowaccess ping https ssh snmp http telnet
set type physical
set explicit-web-proxy enable
set snmp-index 12
end
next
end
2. Create an explicit web proxy policy:
config firewall proxy-policy
edit 1
set proxy explicit-web
set dstintf "port1"
set srcaddr "all"
set dstaddr "all"
set service "webproxy"
set action accept
set schedule "always"
set logtraffic all
next
end
This example creates a basic policy. If required, security profiles can be enabled, and deep
SSL inspection can be selected to inspect HTTPS traffic.
3. Configure a client to use the FortiGate explicit web proxy:
Set the FortiGate IP address as the proxy IP address in the browser, or use an automatic configuration script for the
PAC file.
FTP proxy
FTP proxies can be configured on the FortiGate so that FTP traffic can be proxied. When the FortiGate is configured as
an FTP proxy, FTP client applications should be configured to send FTP requests to the FortiGate.
To configure explicit FTP proxy in the GUI:
1. Enable and configure explicit FTP proxy:
a. Go to Network > Explicit Proxy.
b. Enable Explicit FTP Proxy.
c. Select port2 as the Listen on Interfaces and set the HTTP Port to 21.
FortiOS 6.4.2 Administration Guide 441
Fortinet Inc.
Network
d. Configure the Default Firewall Policy Action as needed.
e. Click Apply.
2. Create an explicit FTP proxy policy:
a. Go to Policy & Objects > Proxy Policy.
b. Click Create New.
c. Set Proxy Type to FTP and Outgoing Interface to port1.
d. Also set Source and Destination to all, Schedule to always, and Action to ACCEPT.
e. Click OK to create the policy.
This example creates a basic policy. If required, security profiles can be enabled.
3. Configure the FTP client application to use the FortiGate IP address.
FortiOS 6.4.2 Administration Guide 442
Fortinet Inc.
Network
To configure explicit FTP proxy in the CLI:
1. Enable and configure explicit FTP proxy:
config ftp-proxy explicit
set status enable
set incoming-port 21
end
config system interface
edit "port2"
set vdom "vdom1"
set ip 10.1.100.1 255.255.255.0
set allowaccess ping https ssh snmp http telnet
set type physical
set explicit-ftp-proxy enable
set snmp-index 12
end
next
end
2. Create an explicit FTP proxy policy:
config firewall proxy-policy
edit 4
set proxy ftp
set dstintf "port2"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
next
end
This example creates a basic policy. If required, security profiles can be enabled.
3. Configure the FTP client application to use the FortiGate IP address.
Transparent proxy
In a transparent proxy deployment, the user's client software, such as a browser, is unaware that it is communicating
with a proxy.
Users request Internet content as usual, without any special client configuration, and the proxy serves their requests.
FortiGate also allows user to configure in transparent proxy mode.
To configure transparent proxy in the GUI:
1. Configure a regular firewall policy with HTTP redirect:
a. Go to Policy & Objects > Firewall Policy.
b. Click Create New.
c. Name the policy appropriately, set the Incoming Interface to port2, and set the Outgoing Interface to port1.
d. Also set Source and Destination to all, Schedule to always, Service to ALL, and Action to ACCEPT.
FortiOS 6.4.2 Administration Guide 443
Fortinet Inc.
Network
e. Set Inspection Mode to Proxy-based and SSL Inspection to deep-inspection.
f. Configure the remaining settings as needed.
g. Click OK.
HTTP redirect can only be configured in the CLI. To redirect HTTPS traffic, deep
inspection is required.
2. Configure a transparent proxy policy:
a. Go to Policy & Objects > Proxy Policy.
b. Click Create New.
c. Set Proxy Type to Transparent Web, set the Incoming Interface to port2, and set the Outgoing Interface to
port1.
d. Also set Source and Destination to all, Scheduleto always, Service to webproxy, and Action to ACCEPT.
FortiOS 6.4.2 Administration Guide 444
Fortinet Inc.
Network
e. Configure the remaining settings as needed.
f. Click OK to create the policy.
This example creates a basic policy. If required, security profiles can be enabled, and deep
SSL inspection can be selected to inspect HTTPS traffic.
3. No special configure is required on the client to use FortiGate transparent proxy. As the client is using the FortiGate
as its default gateway, requests will first hit the regular firewall policy, and then be redirected to the transparent
proxy policy.
To configure transparent proxy in the CLI:
1. Configure a regular firewall policy with HTTP redirect:
config firewall policy
edit 1
set name "1"
set srcintf "port2"
set dstintf "port1"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set inspection-mode proxy
set http-policy-redirect enable
set fsso disable
set ssl-ssh-profile "deep-inspection"
set nat enable
next
end
2. Configure a transparent proxy policy:
config firewall proxy-policy
edit 5
set proxy transparent-web
set srcintf "port2"
set dstintf "port1"
set srcaddr "all"
set dstaddr "all"
set service "webproxy"
set action accept
set schedule "always"
next
end
This example creates a basic policy. If required, security profiles can be enabled, and deep
SSL inspection can be selected to inspect HTTPS traffic.
3. No special configure is required on the client to use FortiGate transparent proxy. As the client is using the FortiGate
as its default gateway, requests will first hit the regular firewall policy, and then be redirected to the transparent
proxy policy.
FortiOS 6.4.2 Administration Guide 445
Fortinet Inc.
Network
Proxy policy addresses
Proxy addresses are designed to be used only by proxy policies. The following address types are available:
l Host regex match on page 446
l URL pattern on page 447
l URL category on page 448
l HTTP method on page 449
l HTTP header on page 450
l User agent on page 451
l Advanced (source) on page 452
l Advanced (destination) on page 453
Fast policy match
The fast policy match function improves the performance of IPv4 explicit and transparent web proxies on FortiGate
devices.
When enabled, after the proxy policies are configured, the FortiGate builds a fast searching table based on the different
proxy policy matching criteria. When fast policy matching is disabled, web proxy traffic is compared to the policies one at
a time from the beginning of the policy list.
Fast policy matching is enabled by default, and can be configured with the following CLI command:
config web-proxy global
set fast-policy-match {enable | disable}
end
Host regex match
In this address type, a user can create a hostname as a regular expression. Once created, the hostname address can be
selected as a destination of a proxy policy. This means that a policy will only allow or block requests that match the
regular expression.
This example creates a host regex match address with the pattern qa.[a-z]*.com.
To create a host regex match address in the GUI:
1. Go to Policy & Objects > Addresses.
2. Click Create New > Address.
3. Set the following:
l Category to Proxy Address,
l Name to Host Regex,
l Type to Host Regex Match, and
l Host Regex Pattern to qa.[a-z]*.com.
FortiOS 6.4.2 Administration Guide 446
Fortinet Inc.
Network
4. Click OK.
To create a host regex match address in the CLI:
config firewall proxy-address
edit "Host Regex"
set type host-regex
set host-regex "qa.[a-z]*.com"
next
end
URL pattern
In this address type, a user can create a URL path as a regular expression. Once created, the path address can be
selected as a destination of a proxy policy. This means that a policy will only allow or block requests that match the
regular expression.
This example creates a URL pattern address with the pattern /filetypes/.
To create a URL pattern address in the GUI:
1. Go to Policy & Objects > Addresses.
2. Click Create New > Address.
3. Set the following:
l Category to Proxy Address,
l Name to URL Regex,
l Type to URL Pattern,
l Host to all, and
l URL Path Regex to /filetypes/.
FortiOS 6.4.2 Administration Guide 447
Fortinet Inc.
Network
4. Click OK.
To create a URL pattern address in the CLI:
config firewall proxy-address
edit "URL Regex"
set type url
set host "all"
set path "/filetypes/"
next
end
URL category
In this address type, a user can create a URL category based on a FortiGuard URL ID. Once created, the address can be
selected as a destination of a proxy policy. This means that a policy will only allow or block requests that match the URL
category.
The example creates a URL category address for URLs in the Education category. For more information about
categories, see https://fortiguard.com/webfilter/categories.
For information about creating and using custom local and remote categories, see Web rating override on page 1164
and Threat feeds on page 296.
To create a URL category address in the GUI:
1. Go to Policy & Objects > Addresses.
2. Click Create New > Address.
3. Set the following:
l Category to Proxy Address,
l Name to url-category,
l Type to URL Category,
l Host to all, and
l URL Category to Education.
FortiOS 6.4.2 Administration Guide 448
Fortinet Inc.
Network
4. Click OK.
To create a URL category address in the CLI:
config firewall proxy-address
edit "url-category"
set type category
set host "all"
set category 30
next
end
To see a list of all the categories and their numbers, when editing the address, enter set category ?.
HTTP method
In this address type, a user can create an address based on the HTTP request methods that are used. Multiple method
options are supported, including: CONNECT, DELETE, GET, HEAD, OPTIONS, POST, PUT, and TRACE. Once
created, the address can be selected as a source of a proxy policy. This means that a policy will only allow or block
requests that match the selected HTTP method.
The example creates a HTTP method address that uses the GET method.
To create a HTTP method address in the GUI:
1. Go to Policy & Objects > Addresses.
2. Click Create New > Address.
3. Set the following:
l Category to Proxy Address,
l Name to method_get,
l Type to HTTP Method,
l Host to all, and
l Request Method to GET.
FortiOS 6.4.2 Administration Guide 449
Fortinet Inc.
Network
4. Click OK.
To create a HTTP method address in the CLI:
config firewall proxy-address
edit "method_get"
set type method
set host "all"
set method get
next
end
HTTP header
In this address type, a user can create a HTTP header as a regular expression. Once created, the header address can
be selected as a source of a proxy policy. This means that a policy will only allow or block requests where the HTTP
header matches the regular expression.
This example creates a HTTP header address with the pattern Q[A-B].
To create a HTTP header address in the GUI:
1. Go to Policy & Objects > Addresses.
2. Click Create New > Address.
3. Set the following:
l Category to Proxy Address,
l Name to HTTP-header,
l Type to HTTP Header,
l Host to all,
l Header Name to Header_Test, and
l Header Regex to Q[A-B].
FortiOS 6.4.2 Administration Guide 450
Fortinet Inc.
Network
4. Click OK.
To create a HTTP header address in the CLI:
config firewall proxy-address
edit "method_get"
set type header
set host "all"
set header-name "Header_Test"
set header "Q[A-B]"
next
end
User agent
In this address type, a user can create an address based on the names of the browsers that are used as user agents.
Multiple browsers are supported, such as Chrome, Firefox, Internet Explorer, and others. Once created, the address can
be selected as a source of a proxy policy. This means that a policy will only allow or block requests from the specified
user agent.
This example creates a user agent address for Google Chrome.
To create a user agent address in the GUI:
1. Go to Policy & Objects > Addresses.
2. Click Create New > Address.
3. Set the following:
l Category to Proxy Address,
l Name to UA-Chrome,
l Type to User Agent,
l Host to all, and
l User Agent to Google Chrome.
FortiOS 6.4.2 Administration Guide 451
Fortinet Inc.
Network
4. Click OK.
To create a user agent address in the CLI:
config firewall proxy-address
edit "UA-Chrome"
set type ua
set host "all"
set ua chrome
next
end
Advanced (source)
In this address type, a user can create an address based on multiple parameters, including HTTP method, User Agent,
and HTTP header. Once created, the address can be selected as a source of a proxy policy. This means that a policy will
only allow or block requests that match the selected address.
This example creates an address that uses the get method, a user agent for Google Chrome, and an HTTP header with
the pattern Q[A-B].
To create an advanced (source) address in the GUI:
1. Go to Policy & Objects > Addresses.
2. Click Create New > Address.
3. Set the following:
l Category to Proxy Address,
l Name to advanced_src,
l Type to Advanced (Source),
l Host to all,
l Request Method to GET,
l User Agent to Google Chrome, and
l HTTP header to Header_Test : Q[A-B].
FortiOS 6.4.2 Administration Guide 452
Fortinet Inc.
Network
4. Click OK.
To create an advanced (source) address in the CLI:
config firewall proxy-address
edit "advance_src"
set type src-advanced
set host "all"
set method get
set ua chrome
config header-group
edit 1
set header-name "Header_Test"
set header "Q[A-B]"
next
end
next
end
Advanced (destination)
In this address type, a user can create an address based on URL pattern and URL category parameters. Once created,
the address can be selected as a destination of a proxy policy. This means that a policy will only allow or block requests
that match the selected address.
This example creates an address with the URL pattern /about that are in the Education category. For more information
about categories, see https://fortiguard.com/webfilter/categories.
To create an advanced (destination) address in the GUI:
1. Go to Policy & Objects > Addresses.
2. Click Create New > Address.
3. Set the following:
l Category to Proxy Address,
l Name to Advanced-dst,
FortiOS 6.4.2 Administration Guide 453
Fortinet Inc.
Network
l Type to Advanced (Destination),
l Host to all,
l URL Path Regex to /about, and
l URL Category to Education.
4. Click OK.
To create an advanced (destination) address in the CLI:
config firewall proxy-address
edit "Advanced-dst"
set type dst-advanced
set host "ubc"
set path "/about"
set category 30
next
end
Proxy policy security profiles
Web proxy policies support most security profile types.
Security profiles must be created before they can be used in a policy, see Security Profiles on
page 992 for information.
Explicit web proxy policy
The security profiles supported by explicit web proxy policies are:
l AntiVirus
l Web Filter
l Application Control
l IPS
l DLP Sensor
l ICAP
FortiOS 6.4.2 Administration Guide 454
Fortinet Inc.
Network
l Web Application Firewall
l SSL Inspection
To configure security profiles on an explicit web proxy policy in the GUI:
1. Go to Policy & Objects > Proxy Policy.
2. Click Create New.
3. Set the following:
Proxy Type Explicit Web
Outgoing Interface port1
Source all
Destination all
Schedule always
Service webproxy
Action ACCEPT
4. In the Firewall / Network Options section, set Protocol Options to default.
5. In the Security Profiles section, make the following selections (for this example, these profiles have all already been
created):
AntiVirus av
Web Filter urlfiler
Application Control app
IPS Sensor-1
DLP Sensor dlp
ICAP default
Web Application Firewall default
SSL Inspection deep-inspection
FortiOS 6.4.2 Administration Guide 455
Fortinet Inc.
Network
6. Click OK to create the policy.
To configure security profiles on an explicit web proxy policy in the CLI:
config firewall proxy-policy
edit 1
set proxy explicit-web
set dstintf "port1"
set srcaddr "all"
set dstaddr "all"
set service "web"
set action accept
set schedule "always"
set utm-status enable
set av-profile "av"
set webfilter-profile "urlfilter"
set dlp-sensor "dlp"
set ips-sensor "sensor-1"
set application-list "app"
set icap-profile "default"
set waf-profile "default"
set ssl-ssh-profile "deep-inspection"
next
end
FortiOS 6.4.2 Administration Guide 456
Fortinet Inc.
Network
Transparent proxy
The security profiles supported by transparent proxy policies are:
l AntiVirus
l Web Filter
l Application Control
l IPS
l DLP Sensor
l ICAP
l Web Application Firewall
l SSL Inspection
To configure security profiles on a transparent proxy policy in the GUI:
1. Go to Policy & Objects > Proxy Policy.
2. Click Create New.
3. Set the following:
Proxy Type Explicit Web
Incoming Interfae port2
Outgoing Interface port1
Source all
Destination all
Schedule always
Service webproxy
Action ACCEPT
4. In the Firewall / Network Options section, set Protocol Options to default.
5. In the Security Profiles section, make the following selections (for this example, these profiles have all already been
created):
AntiVirus av
Web Filter urlfiler
Application Control app
IPS Sensor-1
DLP Sensor dlp
ICAP default
Web Application Firewall default
SSL Inspection deep-inspection
FortiOS 6.4.2 Administration Guide 457
Fortinet Inc.
Network
6. Click OK to create the policy.
To configure security profiles on a transparent proxy policy in the CLI:
config firewall proxy-policy
edit 2
set proxy transparent-web
set srcintf "port2"
set dstintf "port1"
set srcaddr "all"
set dstaddr "all"
set service "webproxy"
set action accept
set schedule "always"
set utm-status enable
set av-profile "av"
set webfilter-profile "urlfilter"
set dlp-sensor "dlp"
set ips-sensor "sensor-1"
set application-list "app"
set icap-profile "default"
set waf-profile "default"
set ssl-ssh-profile "certificate-inspection"
next
end
FortiOS 6.4.2 Administration Guide 458
Fortinet Inc.
Network
FTP proxy
The security profiles supported by FTP proxy policies are:
l AntiVirus
l Application Control
l IPS
l DLP Sensor
To configure security profiles on an FTP proxy policy in the GUI:
1. Go to Policy & Objects > Proxy Policy.
2. Click Create New.
3. Set the following:
Proxy Type FTP
Outgoing Interface port1
Source all
Destination all
Schedule always
Action ACCEPT
4. In the Firewall / Network Options section, set Protocol Options to default.
5. In the Security Profiles section, make the following selections (for this example, these profiles have all already been
created):
AntiVirus av
Application Control app
IPS Sensor-1
DLP Sensor dlp
FortiOS 6.4.2 Administration Guide 459
Fortinet Inc.
Network
6. Click OK to create the policy.
To configure security profiles on an FTP proxy policy in the CLI:
config firewall proxy-policy
edit 3
set proxy ftp
set dstintf "port1"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set utm-status enable
set av-profile "av"
set dlp-sensor "dlp"
set ips-sensor "sensor-1"
set application-list "app"
next
end
Explicit proxy authentication
FortiGate supports multiple authentication methods. This topic explains using an external authentication server with
Kerberos as the primary and NTLM as the fallback.
To configure Explicit Proxy with authentication:
1. Enable and configure the explicit proxy on page 461.
2. Configure the authentication server and create user groups on page 461.
3. Create an authentication scheme and rules on page 463.
FortiOS 6.4.2 Administration Guide 460
Fortinet Inc.
Network
4. Create an explicit proxy policy and assign a user group to the policy on page 464.
5. Verify the configuration on page 465.
Enable and configure the explicit proxy
To enable and configure explicit web proxy in the GUI:
1. Go to Network > Explicit Proxy.
2. Enable Explicit Web Proxy.
3. Select port2 as the Listen on Interfaces and set the HTTP Port to 8080.
4. Configure the remaining settings as needed.
5. Click Apply.
To enable and configure explicit web proxy in the CLI:
config web-proxy explicit
set status enable
set ftp-over-http enable
set socks enable
set http-incoming-port 8080
set ipv6-status enable
set unknown-http-version best-effort
end
config system interface
edit "port2"
set vdom "vdom1"
set ip 10.1.100.1 255.255.255.0
set allowaccess ping https ssh snmp http telnet
set type physical
set explicit-web-proxy enable
set snmp-index 12
end
next
end
Configure the authentication server and create user groups
Since we are using an external authentication server with Kerberos authentication as the primary and NTLM as the
fallback, Kerberos authentication is configured first and then FSSO NTLM authentication is configured.
For successful authorization, the FortiGate checks if user belongs to one of the groups that is permitted in the security
policy.
To configure an authentication server and create user groups in the GUI:
1. Configure Kerberos authentication:
a. Go to User & Authentication > LDAP Servers.
b. Click Create New.
FortiOS 6.4.2 Administration Guide 461
Fortinet Inc.
Network
c. Set the following:
Name ldap-kerberos
Server IP 172.18.62.220
Server Port 389
Common Name Identifier cn
Distinguished Name dc=fortinetqa,dc=local
d. Click OK
2. Define Kerberos as an authentication service. This option is only available in the CLI.
3. Configure FSSO NTLM authentication:
FSSO NTLM authentication is supported in a Windows AD network. FSSO can also provide NTLM authentication
service to the FortiGate unit. When a user makes a request that requires authentication, the FortiGate initiates
NTLM negotiation with the client browser, but does not process the NTLM packets itself. Instead, it forwards all the
NTLM packets to the FSSO service for processing.
a. Go to Security Fabric > External Connectors.
b. Click Create New and select Fortinet Single Sign-On Agent from the Endpoint/Identity category.
c. Set the Name to FSSO, Primary FSSO Agent to 172.16.200.220, and enter a password.
d. Click OK.
4. Create a user group for Kerberos authentication:
a. Go to User & Authentication > User Groups.
b. Click Create New.
c. Set the Name to Ldap-Group, and Type to Firewall.
d. In the Remote Groups table, click Add, and set the Remote Server to the previously created ldap-kerberos
server.
e. Click OK.
5. Create a user group for NTLM authentication:
a. Go to User & Authentication > User Groups.
b. Click Create New.
c. Set the Name to NTLM-FSSO-Group, Type to Fortinet Single Sign-On (FSSO), and add FORTINETQA/FSSO
as a member.
d. Click OK.
To configure an authentication server and create user groups in the CLI:
1. Configure Kerberos authentication:
config user ldap
edit "ldap-kerberos"
set server "172.18.62.220"
set cnid "cn"
set dn "dc=fortinetqa,dc=local"
set type regular
set username "CN=root,CN=Users,DC=fortinetqa,DC=local"
set password **********
next
end
FortiOS 6.4.2 Administration Guide 462
Fortinet Inc.
Network
2. Define Kerberos as an authentication service:
config user krb-keytab
edit "http_service"
set pac-data disable
set principal "HTTP/[email protected]"
set ldap-server "ldap-kerberos"
set keytab
"BQIAAABFAAIAEEZPUlRJTkVUUUEuTE9DQUwABEhUVFAAFEZHVC5GT1JUSU5FVFFBLkxPQ0FMAAAAAQAAAAA
EAAEACKLCMonpitnVAAAARQACABBGT1JUSU5FVFFBLkxPQ0FMAARIVFRQABRGR1QuRk9SVElORVRRQS5MT0N
BTAAAAAEAAAAABAADAAiiwjKJ6YrZ1QAAAE0AAgAQRk9SVElORVRRQS5MT0NBTAAESFRUUAAURkdULkZPUlR
JTkVUUUEuTE9DQUwAAAABAAAAAAQAFwAQUHo9uqR9cSkzyxdzKCEXdwAAAF0AAgAQRk9SVElORVRRQS5MT0N
BTAAESFRUUAAURkdULkZPUlRJTkVUUUEuTE9DQUwAAAABAAAAAAQAEgAgzee854Aq1HhQiKJZvV4tL2Poy7h
MIARQpK8MCB//BIAAAABNAAIAEEZPUlRJTkVUUUEuTE9DQUwABEhUVFAAFEZHVC5GT1JUSU5FVFFBLkxPQ0F
MAAAAAQAAAAAEABEAEG49vHEiiBghr63Z/lnwYrU="
next
end
3. Configure FSSO NTLM authentication:
config user fsso
edit "1"
set server "172.18.62.220"
set password **********
next
end
4. Create a user group for Kerberos authentication:
config user group
edit "Ldap-Group"
set member "ldap" "ldap-kerberos"
next
end
5. Create a user group for NTLM authentication:
config user group
edit "NTLM-FSSO-Group"
set group-type fsso-service
set member "FORTINETQA/FSSO"
next
end
Create an authentication scheme and rules
Explicit proxy authentication is managed by authentication schemes and rules. An authentication scheme must be
created first, and then the authentication rule.
To create an authentication scheme and rules in the GUI:
1. Create an authentication scheme:
a. Go to Policy & Objects > Authentication Rules.
b. Click Create New > Authentication Schemes.
c. Set the Name to Auth-scheme-Negotiate and select Negotiate as the Method.
d. Click OK.
FortiOS 6.4.2 Administration Guide 463
Fortinet Inc.
Network
2. Create an authentication rule:
a. Go to Policy & Objects > Authentication Rules.
b. Click Create New > Authentication Rules.
c. Set the Name to Auth-Rule, Source Address to all, and Protocol to HTTP.
d. Enable Authentication Scheme, and select the just created Auth-scheme-Negotiate scheme.
e. Click OK.
To create an authentication scheme and rules in the CLI:
1. Create an authentication scheme:
config authentication scheme
edit "Auth-scheme-Negotiate"
set method negotiate <<< Accepts both Kerberos and NTLM as fallback
next
end
2. Create an authentication rule:
config authentication rule
edit "Auth-Rule"
set status enable
set protocol http
set srcaddr "all"
set ip-based enable
set active-auth-method "Auth-scheme-Negotiate"
set comments "Testing"
next
end
Create an explicit proxy policy and assign a user group to the policy
To create an explicit proxy policy and assign a user group to it in the GUI:
1. Go to Policy & Object > Proxy Policy.
2. Click Create New.
3. Set Proxy Type to Explicit Web and Outgoing Interface to port1.
4. Set Source to all, and the just created user groups NTLM-FSSO-Group and Ldap-Group.
5. Also set Destination to all, Schedule to always, Service to webproxy, and Action to ACCEPT.
6. Click OK.
To create an explicit proxy policy and assign a user group to it in the CLI:
config firewall proxy-policy
edit 1
set proxy explicit-web
set dstintf "port1"
set srcaddr "all"
set dstaddr "all"
set service "web"
set action accept
set schedule "always"
set logtraffic all
FortiOS 6.4.2 Administration Guide 464
Fortinet Inc.
Network
set groups "NTLM-FSSO-Group" "Ldap-Group"
set av-profile "av"
set ssl-ssh-profile "deep-custom"
next
end
Verify the configuration
Log in using a domain and system that would be authenticated using the Kerberos server, then enter the diagnose
wad user list CLI command to verify:
# diagnose wad user list
ID: 8, IP: 10.1.100.71, VDOM: vdom1
user name : [email protected]
duration : 389
auth_type : IP
auth_method : Negotiate
pol_id : 1
g_id : 1
user_based : 0
expire : no
LAN:
bytes_in=4862 bytes_out=11893
WAN:
bytes_in=7844 bytes_out=1023
Log in using a system that is not part of the domain. The NTLM fallback server should be used:
# diagnose wad user list
ID: 2, IP: 10.1.100.202, VDOM: vdom1
user name : TEST31@FORTINETQA
duration : 7
auth_type : IP
auth_method : NTLM
pol_id : 1
g_id : 5
user_based : 0
expire : no
LAN:
bytes_in=6156 bytes_out=16149
WAN:
bytes_in=7618 bytes_out=1917
Transparent web proxy forwarding
In FortiOS, there is an option to enable proxy forwarding for transparent web proxy policies and regular firewall policies
for HTTP and HTTPS.
In previous versions of FortiOS, you could forward proxy traffic to another proxy server (proxy chaining) with explicit
proxy. Now, you can forward web traffic to the upstream proxy without having to reconfigure your browsers or publish a
proxy auto-reconfiguration (PAC) file.
Once configured, the FortiGate forwards traffic generated by a client to the upstream proxy. The upstream proxy then
forwards it to the server.
FortiOS 6.4.2 Administration Guide 465
Fortinet Inc.
Network
To enable proxy forwarding using the CLI:
1. Configure the web proxy forwarding server:
config web-proxy forward-server
edit "PC_03"
set ip 172.16.200.46
set healthcheck enable
set monitor "http://www.google.ca"
next
end
2. Append the web proxy forwarding server to a firewall policy:
config firewall policy
edit 1
set name "LAN to WAN"
set srcintf "port2"
set dstintf "port1"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set utm-status enable
set logtraffic all
set webproxy-forward-server "PC_03"
set fsso disable
set av-profile "av"
set ssl-ssh-profile "deep-custom"
set nat enable
next
end
Upstream proxy authentication in transparent proxy mode
A downstream proxy FortiGate that needs to be authenticated by the upstream web proxy can use the basic
authentication method to send its username and password, in the base64 format, to the upstream web proxy for
authentication. If the authentication succeeds, web traffic that is forwarded from the downstream proxy FortiGate to the
upstream proxy can be accepted and forwarded to its destinations.
In this example, a school has a FortiGate acting as a downstream proxy that is configured with firewall policies for each
user group (students and staff). In each policy, a forwarding server is configured to forward the web traffic to the
upstream web proxy.
The username and password that the upstream web proxy uses to authenticate the downstream proxy are configured on
the forwarding server, and are sent to the upstream web proxy with the forwarded HTTP requests.
Username Password
student.proxy.local:8080 students ABC123
staff.proxy.local:8081 staff 123456
FortiOS 6.4.2 Administration Guide 466
Fortinet Inc.
Network
On the downstream FortiGate, configure forwarding servers with the usernames and passwords for authentication on
the upstream web proxy, then apply those servers to firewall policies for transparent proxy. For explicit web proxy, the
forwarding servers can be applied to proxy policies.
When the transparent proxy is configured, clients can access websites without configuring a web proxy in their browser.
The downstream proxy sends the username and password to the upstream proxy with forwarded HTTP requests to be
authenticated.
To configure the forwarding server on the downstream FortiGate:
config web-proxy forward-server
edit "Student_Upstream_WebProxy"
set addr-type fqdn
set fqdn "student.proxy.local"
set port 8080
set username "student"
set password ABC123
next
edit "Staff_Upstream_WebProxy"
set addr-type fqdn
set fqdn "staff.proxy.local"
set port 8081
set username "staff"
set password 123456
next
end
To configure firewall policies for transparent proxy:
config firewall policy
edit 1
set srcintf "Vlan_Student"
set dstintf "port9"
set srcaddr "Student_Subnet"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set utm-status enable
set inspection-mode proxy
set ssl-ssh-profile "deep-inspection"
set av-profile "av"
set webproxy-forward-server "Student_Upstream_WebProxy"
set nat enable
next
edit 2
set srcintf "Vlan_Staff"
set dstintf "port9"
set srcaddr "Staff_Subnet"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set utm-status enable
set inspection-mode proxy
set ssl-ssh-profile "deep-inspection"
FortiOS 6.4.2 Administration Guide 467
Fortinet Inc.
Network
set av-profile "av"
set webproxy-forward-server "Staff_Upstream_WebProxy"
set nat enable
next
end
Multiple dynamic header count
Multiple dynamic headers are supported for web proxy profiles, as well as Base64 encoding and the append/new
options.
Administrators only have to select the dynamic header in the profile. The FortiGate will automatically display the
corresponding static value. For example, if the administrator selects the $client-ip header, the FortiGate will display
the actual client IP address.
The supported headers are:
$client-ip Client IP address
$user Authentication user name
$domain User domain name
$local_grp Firewall group name
$remote_grp Group name from authentication server
$proxy_name Proxy realm name
To configure dynamic headers using the CLI:
Since authentication is required, FSSO NTLM authentication is configured in this example.
1. Configure LDAP:
config user ldap
edit "ldap-kerberos"
set server "172.18.62.220"
set cnid "cn"a
set dn "dc=fortinetqa,dc=local"
set type regular
set username "CN=root,CN=Users,DC=fortinetqa,DC=local"
set password **********
next
end
2. Configure FSSO:
config user fsso
edit "1"
set server "172.18.62.220"
set password **********
next
end
FortiOS 6.4.2 Administration Guide 468
Fortinet Inc.
Network
3. Configure a user group:
config user group
edit "NTLM-FSSO"
set group-type fsso-service
set member "FORTINETQA/FSSO"
next
end
4. Configure an authentication scheme:
config authentication scheme
edit "au-sch-ntlm"
set method ntlm
next
end
5. Configure an authentication rule:
config authentication rule
edit "au-rule-fsso"
set srcaddr "all"
set active-auth-method "au-sch-ntlm"
next
end
6. Create a web proxy profile that adds a new dynamic and custom Via header:
config web-proxy profile
edit "test"
set log-header-change enable
config headers
edit 1
set name "client-ip"
set content "$client-ip"
next
edit 2
set name "Proxy-Name"
set content "$proxy_name"
next
edit 3
set name "user"
set content "$user"
next
edit 4
set name "domain"
set content "$domain"
next
edit 5
set name "local_grp"
set content "$local_grp"
next
edit 6
set name "remote_grp"
set content "$remote_grp"
next
edit 7
set name "Via"
set content "Fortigate-Proxy"
FortiOS 6.4.2 Administration Guide 469
Fortinet Inc.
Network
next
end
next
end
7. In the proxy policy, append the web proxy profile created in the previous step:
config firewall proxy-policy
edit 1
set proxy explicit-web
set dstintf "port1"
set srcaddr "all"
set dstaddr "all"
set service "web"
set action accept
set schedule "always"
set logtraffic all
set groups "NTLM-FSSO"
set webproxy-profile "test"
set utm-status enable
set av-profile "av"
set webfilter-profile "content"
set ssl-ssh-profile "deep-custom"
next
end
8. Once traffic is being generated from the client, look at the web filter logs to verify that it is working.
The corresponding values for all the added header fields displays in the Change headers section at the bottom of
the Log Details pane.
1: date=2019-02-07 time=13:57:24 logid="0344013632" type="utm" subtype="webfilter"
eventtype="http_header_change" level="notice" vd="vdom1" eventtime=1549576642 policyid=1
transid=50331689 sessionid=1712788383 user="TEST21@FORTINETQA" group="NTLM-FSSO"
profile="test" srcip=10.1.100.116 srcport=53278 dstip=172.16.200.46 dstport=80
srcintf="port2" srcintfrole="undefined" dstintf="port1" dstintfrole="undefined" proto=6
service="HTTP" url="http://172.16.200.46/" agent="curl/7.22.0" chgheaders="Added=client-
ip: 10.1.100.116|Proxy-Name: 1.1 100D.qa|user: TEST21|domain: FORTINETQA|local_grp:
NTLM-FSSO|remote_grp: FORTINETQA/FSSO|Via: Fortigate-Proxy"
FortiOS 6.4.2 Administration Guide 470
Fortinet Inc.
Network
Restricted SaaS access (Office 365, G Suite, Dropbox)
With the web proxy profile, you can specify access permissions for Microsoft Office 365, Google G Suite, and Dropbox.
You can insert vendor-defined headers that restrict access to the specific accounts. You can also insert custom headers
for any destination.
You can configure the web proxy profile with the required headers for the specific destinations, and then directly apply it
to a policy to control the header's insertion.
To implement Office 365 tenant restriction, G Suite account access control, and Dropbox network
access control:
1. Configure a web proxy profile according to the vendors' specifications:
a. Define the traffic destination (service provider).
b. Define the header name, defined by the service provider.
c. Define the value that will be inserted into the traffic, defined by your settings.
2. Apply the web proxy profile to a policy.
The following example creates a web proxy profile for Office 365, G Suite, and Dropbox access control.
Due to vendors' changing requirements, this example may no longer comply with the vendors'
official guidelines.
To create a web proxy profile for access control using the CLI:
1. Configure the web proxy profile:
config web-proxy profile
edit "SaaS-Tenant-Restriction"
set header-client-ip pass
FortiOS 6.4.2 Administration Guide 471
Fortinet Inc.
Network
set header-via-request pass
set header-via-response pass
set header-x-forwarded-for pass
set header-front-end-https pass
set header-x-authenticated-user pass
set header-x-authenticated-groups pass
set strip-encoding disable
set log-header-change disable
config headers
edit 1
set name "Restrict-Access-To-Tenants" <---header name defined by
Office365 spec. input EXACTLY as it is
set dstaddr "Microsoft Office 365" <----built-in destination address for
Office365
set action add-to-request
set base64-encoding disable
set add-option new
set protocol https http
set content "contoso.onmicrosoft.com,fabrikam.onmicrosoft.com" <----
your tenants restriction configuration
next
edit 2
set name "Restrict-Access-Context" <----header name defined by
Office365 spec. input EXACTLY as it is
set dstaddr "Microsoft Office 365" <----build-in destination address
for Office365
set action add-to-request
set base64-encoding disable
set add-option new
set protocol https http
set content "456ff232-35l2-5h23-b3b3-3236w0826f3d" <----your directory
ID can find in Azure portal
next
edit 3
set name "X-GooGApps-Allowed-Domains" <----header name defined by
Google G suite.
set dstaddr "G Suite" <---- built-in G Suite destination address
set action add-to-request
set base64-encoding disable
set add-option new
set protocol https http
set content "abcd.com" <----your domain restriction when you create G
Suite account
next
edit 4
set name "X-Dropbox-allowed-Team-Ids" <----header defined by Dropbox
set dstaddr "wildcard.dropbox.com" <----build-in destination address
for Dropbox
set action add-to-request
set base64-encoding disable
set add-option new
set protocol https http
set content "dbmid:FDFSVF-DFSDF" <----your team-Id in Dropbox
next
end
FortiOS 6.4.2 Administration Guide 472
Fortinet Inc.
Network
next
end
2. Apply the web proxy profile to a firewall policy:
config firewall policy
edit 1
set name "WF"
set srcintf "port10" "wifi"
set dstintf "port9"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set webproxy-profile "SaaS-Tenant-Restriction"
set utm-status enable
set utm-inspection-mode proxy
set logtraffic all
set webfilter-profile "blocktest2"
set application-list "g-default"
set profile-protocol-options "protocol"
set ssl-ssh-profile "protocols"
set nat enable
next
end
References
l Office 365: Use tenant restrictions to manage access to SaaS cloud applications
l G Suite: Block access to consumer accounts
l Dropbox: Network control
Explicit proxy and FortiSandbox Cloud
Explicit proxy connections can leverage FortiSandbox Cloud for advanced threat scanning and updates. This allows
FortiGates behind isolated networks to connect to FortiCloud services.
FortiOS 6.4.2 Administration Guide 473
Fortinet Inc.
Network
To configure FortiGuard services to communicate with an explicit proxy server:
config system fortiguard
set proxy-server-ip 172.16.200.44
set proxy-server-port 3128
set proxy-username "test1"
set proxy-password ENC
Y0+KTg9UsILkv8+nDe+Pe3VlnlaHUMzLkfAXLATknW/xm/Xv7EdZHTnua1djM+waZA1vxCh8LV7Ci4sEhj/PABSTShSt
xskEn3E1+CjxviwVSljgF6AD+zJZF/+4jkspq+PogZT3LVO68+kqsPdU4rikuy1BbnsbZcPxC/MJyuIx7343bdKYqp+I
UprQUR2wf8tiMg==
end
To verify the explicit proxy connection to FortiSandbox Cloud:
# diagnose debug application forticldd -1
Debug messages will be on for 30 minutes.
# diagnose debug enable
[2942] fds_handle_request: Received cmd 23 from pid-2526, len 0
[40] fds_queue_task: req-23 is added to Cloud-sandbox-controller
[178] fds_svr_default_task_xmit: try to get IPs for Cloud-sandbox-controller
[239] fds_resolv_addr: resolve aptctrl1.fortinet.com
[169] fds_get_addr: name=aptctrl1.fortinet.com, id=32, cb=0x2bc089
[101] dns_parse_resp: DNS aptctrl1.fortinet.com -> 172.16.102.21
[227] fds_resolv_cb: IP-1: 172.16.102.21
[665] fds_ctx_set_addr: server: 172.16.102.21:443
[129] fds_svr_default_pickup_server: Cloud-sandbox-controller: 172.16.102.21:443
[587] fds_https_start_server: server: 172.16.102.21:443
[579] ssl_new: SSL object is created
[117] https_create: proxy server 172.16.200.44 port:3128
[519] fds_https_connect: https_connect(172.16.102.21) is established.
[261] fds_svr_default_on_established: Cloud-sandbox-controller has connected to
ip=172.16.102.21
[268] fds_svr_default_on_established: server-Cloud-sandbox-controller handles cmd-23
[102] fds_pack_objects: number of objects: 1
[75] fds_print_msg: FCPC: len=109
[81] fds_print_msg: Protocol=2.0
[81] fds_print_msg: Command=RegionList
[81] fds_print_msg: Firmware=FG101E-FW-6.02-0917
[81] fds_print_msg: SerialNumber=FG101E4Q17002429
[81] fds_print_msg: TimeZone=-7
[75] fds_print_msg: http req: len=248
[81] fds_print_msg: POST https://172.16.102.21:443/FCPService HTTP/1.1
[81] fds_print_msg: User-Agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1)
[81] fds_print_msg: Host: 172.16.102.21:443
[81] fds_print_msg: Cache-Control: no-cache
[81] fds_print_msg: Connection: close
[81] fds_print_msg: Content-Type: application/octet-stream
[81] fds_print_msg: Content-Length: 301
[524] fds_https_connect: http request to 172.16.102.21: header=248, ext=301.
[257] fds_https_send: sent 248 bytes: pos=0, len=248
[265] fds_https_send: 172.16.102.21: sent 248 byte header, now send 301-byte body
[257] fds_https_send: sent 301 bytes: pos=0, len=301
[273] fds_https_send: sent the entire request to server: 172.16.102.21:443
[309] fds_https_recv: read 413 bytes: pos=413, buf_len=2048
[332] fds_https_recv: received the header from server: 172.16.102.21:443, [HTTP/1.1 200
Content-Type: application/octet-stream
FortiOS 6.4.2 Administration Guide 474
Fortinet Inc.
Network
Content-Length: 279
Date: Thu, 20 Jun 2019 16:41:11 GMT
Connection: close]
[396] fds_https_recv: Do memmove buf_len=279, pos=279
[406] fds_https_recv: server: 172.16.102.21:443, buf_len=279, pos=279
[453] fds_https_recv: received a packet from server-172.16.102.21:443: sz=279, objs=1
[194] __ssl_data_ctx_free: Done
[839] ssl_free: Done
[830] ssl_disconnect: Shutdown
[481] fds_https_recv: obj-0: type=FCPR, len=87
[294] fds_svr_default_on_response: server-Cloud-sandbox-controller handles cmd-23
[75] fds_print_msg: fcpr: len=83
[81] fds_print_msg: Protocol=2.0
[81] fds_print_msg: Response=202
[81] fds_print_msg: ResponseItem=Region:Europe,Global,Japan,US
[81] fds_print_msg: existing:Japan
[3220] aptctrl_region_res: Got rsp: Region:Europe,Global,Japan,US
[3222] aptctrl_region_res: Got rsp: Region existing:Japan
[439] fds_send_reply: Sending 28 bytes data.
[395] fds_free_tsk: cmd=23; req.noreply=1
# [136] fds_on_sys_fds_change: trace
[2942] fds_handle_request: Received cmd 22 from pid-170, len 0
[40] fds_queue_task: req-22 is added to Cloud-sandbox-controller
[587] fds_https_start_server: server: 172.16.102.21:443
[579] ssl_new: SSL object is created
[117] https_create: proxy server 172.16.200.44 port:3128
[519] fds_https_connect: https_connect(172.16.102.21) is established.
[261] fds_svr_default_on_established: Cloud-sandbox-controller has connected to
ip=172.16.102.21
[268] fds_svr_default_on_established: server-Cloud-sandbox-controller handles cmd-22
[102] fds_pack_objects: number of objects: 1
[75] fds_print_msg: FCPC: len=146
[81] fds_print_msg: Protocol=2.0
[81] fds_print_msg: Command=UpdateAPT
[81] fds_print_msg: Firmware=FG101E-FW-6.02-0917
[81] fds_print_msg: SerialNumber=FG101E4Q17002429
[81] fds_print_msg: TimeZone=-7
[81] fds_print_msg: TimeZoneInMin=-420
[81] fds_print_msg: DataItem=Region:US
[75] fds_print_msg: http req: len=248
[81] fds_print_msg: POST https://172.16.102.21:443/FCPService HTTP/1.1
[81] fds_print_msg: User-Agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1)
[81] fds_print_msg: Host: 172.16.102.21:443
[81] fds_print_msg: Cache-Control: no-cache
[81] fds_print_msg: Connection: close
[81] fds_print_msg: Content-Type: application/octet-stream
[81] fds_print_msg: Content-Length: 338
[524] fds_https_connect: http request to 172.16.102.21: header=248, ext=338.
[257] fds_https_send: sent 248 bytes: pos=0, len=248
[265] fds_https_send: 172.16.102.21: sent 248 byte header, now send 338-byte body
[257] fds_https_send: sent 338 bytes: pos=0, len=338
[273] fds_https_send: sent the entire request to server: 172.16.102.21:443
[309] fds_https_recv: read 456 bytes: pos=456, buf_len=2048
[332] fds_https_recv: received the header from server: 172.16.102.21:443, [HTTP/1.1 200
Content-Type: application/octet-stream
Content-Length: 322
FortiOS 6.4.2 Administration Guide 475
Fortinet Inc.
Network
Date: Thu, 20 Jun 2019 16:41:16 GMT
Connection: close]
[396] fds_https_recv: Do memmove buf_len=322, pos=322
[406] fds_https_recv: server: 172.16.102.21:443, buf_len=322, pos=322
[453] fds_https_recv: received a packet from server-172.16.102.21:443: sz=322, objs=1
[194] __ssl_data_ctx_free: Done
[839] ssl_free: Done
[830] ssl_disconnect: Shutdown
[481] fds_https_recv: obj-0: type=FCPR, len=130
[294] fds_svr_default_on_response: server-Cloud-sandbox-controller handles cmd-22
[75] fds_print_msg: fcpr: len=126
[81] fds_print_msg: Protocol=2.0
[81] fds_print_msg: Response=202
[81] fds_print_msg: ResponseItem=Server1:172.16.102.51:514
[81] fds_print_msg: Server2:172.16.102.52:514
[81] fds_print_msg: Contract:20210215
[81] fds_print_msg: NextRequest:86400
[615] parse_apt_contract_time_str: The APTContract is valid to Mon Feb 15 23:59:59 2021
[616] parse_apt_contract_time_str: FGT current local time is Thu Jun 20 09:41:16 2019
[3289] aptctrl_update_res: Got rsp: APT=172.16.102.51:514 APTAlter=172.16.102.52:514 next-
upd=86400
[395] fds_free_tsk: cmd=22; req.noreply=1
Proxy chaining (web proxy forwarding servers)
For the explicit web proxy you can configure web proxy forwarding servers to use proxy chaining to redirect web proxy
sessions to other proxy servers. Proxy chaining can be used to forward web proxy sessions from the FortiGate unit to
one or more other proxy servers on your network or on a remote network. You can use proxy chaining to integrate the
FortiGate explicit web proxy with a web proxy solution that you already have in place.
A FortiGate unit can forward sessions to most web proxy servers including a remote FortiGate unit with the explicit web
proxy enabled. No special configuration of the explicit web proxy on the remote FortiGate unit is required.
You can deploy the explicit web proxy with proxy chaining in an enterprise environment consisting of small satellite
offices and a main office. If each office has a FortiGate unit, users at each of the satellite offices can use their local
FortiGate unit as an explicit web proxy server. The satellite office FortiGate units can forward explicit web proxy sessions
to an explicit web proxy server at the central office. From here the sessions can connect to web servers on the Internet.
FortiGate proxy chaining does not support web proxies in the proxy chain authenticating each other.
The following examples assume explicit web proxy has been enabled.
To enable explicit web proxy in the GUI:
1. Go to System > Feature Visibility.
2. In the Security Features column, enable Explicit Proxy.
3. Configure the explicit web proxy settings. See Explicit web proxy on page 438.
To add a web proxy forwarding server in the GUI:
1. Go to Network > Explicit Proxy. The Explicit Proxy page opens.
2. In the Web Proxy Forwarding Servers section, click Create New.
FortiOS 6.4.2 Administration Guide 476
Fortinet Inc.
Network
3. Configure the server settings and click OK.
Name Enter the name of the forwarding server.
Proxy Address Type Select the type of IP address of the forwarding server. A forwarding server can
have an FQDN or IP address.
Proxy Address Enter the IP address of the forwarding server.
Port Enter the port number on which the proxy receives connections. Traffic leaving
the FortiGate explicit web proxy for this server has its destination port number
changed to this number.
Server Down Action Select the action the explicit web proxy will take if the forwarding server is
down.
l Block: Blocks the traffic if the remote server is down.
l Use Original Server: Forwards the traffic from the FortiGate to its
destination as if no forwarding server is configured.
Health Monitor Select to enable health check monitoring.
Health Check Monitor Site Enter the address of a remote site.
Example
The following example adds a web proxy forwarding server named fwd-srv at address proxy.example.com and port
8080.
To add a web proxy forwarding server in the CLI:
config web-proxy forward-server
edit fwd-srv
set addr-type fqdn
set fqdn proxy.example.com
set port 8080
end
Web proxy forwarding server monitoring and health checking
By default, a FortiGate unit monitors a web proxy forwarding server by forwarding a connection to the remote server
every 10 seconds. The remote server is assumed to be down if it does not respond to the connection. FortiGate
continues checking the server. The server is assumed to be back up when the server sends a response. If you enable
health checking, the FortiGate unit attempts to get a response from a web server every 10 seconds by connecting
through the remote forwarding server.
You can configure health checking for each remote server and specify a different website to check for each one.
If the remote server is found to be down you can configure the FortiGate unit to block sessions until the server comes
back up or to allow sessions to connect to their destination, bypassing the remote forwarding server. You cannot
configure the FortiGate unit to fail over to another remote forwarding server.
To configure proxy server monitor and health checking in the GUI:
1. Go to Network > Explicit Proxy. The Explicit Proxy page opens.
2. In the Web Proxy Forwarding Servers section, select a server and click Editi.
FortiOS 6.4.2 Administration Guide 477
Fortinet Inc.
Network
3. Configure the Server Down Action and Health Monitor settings.
Server Down Action Select the action the explicit web proxy will take if the forwarding server is
down.
l Block: Blocks the traffic if the remote server is down.
l Use Original Server: Forwards the traffic from the FortiGate to its
destination as if no forwarding server configured.
Health Monitor Select to enable health check monitoring.
Health Check Monitor Site Enter the address of a remote site.
4. Click OK.
Example
The following example enables health checking for a web proxy forwarding server and sets the server down option to
bypass the forwarding server if it is down.
To configure proxy server monitor and health checking in the CLI:
config web-proxy forward-server
edit fwd-srv
set healthcheck enable
set monitor http://example.com
set server-down-option pass
end
Grouping forwarding servers and load balancing traffic to the servers
You can add multiple web proxy forwarding servers to a forwarding server group and then add the server group to an
explicit web proxy policy instead of adding a single server. Forwarding server groups are created from the FortiGate CLI
but can be added to policies from the web-based manager (or from the CLI).
When you create a forwarding server group you can select a load balancing method to control how sessions are load
balanced to the forwarding servers in the server group. Two load balancing methods are available:
l Weighted load balancing sends more sessions to the servers with higher weights. You can configure the weight for
each server when you add it to the group.
l Least-session load balancing sends new sessions to the forwarding server that is processing the fewest sessions.
When you create a forwarding server group you can also enable affinity. Enable affinity to have requests from the same
client processed by the same server. This can reduce delays caused by using multiple servers for a single multi-step
client operation. Affinity takes precedence over load balancing.
You can also configure the behavior of the group if all of the servers in the group are down. You can select to block traffic
or you can select to have the traffic pass through the FortiGate explicit proxy directly to its destination instead of being
sent to one of the forwarding servers.
Example
The following example adds a forwarding server group that uses weighted load balancing to load balance traffic to three
forwarding servers. Server weights are configured to send most traffic to server2. The group has affinity enabled
and blocks traffic if all of the forward servers are down.
FortiOS 6.4.2 Administration Guide 478
Fortinet Inc.
Network
To configure load balancing in the CLI:
config web-proxy forward-server
edit server_1
set ip 172.20.120.12
set port 8080
next
edit server_2
set ip 172.20.120.13
set port 8000
next
edit server_3
set ip 172.20.120.14
set port 8090
next
end
config web-proxy forward-server-group
edit New-fwd-group
set affinity enable
set ldb-method weighted
set group-down-option block
config server-list
edit server_1
set weight 10
next
edit server_2
set weight 40
next
edit server_3
set weight 10
next
end
Adding proxy chaining to an explicit web proxy policy
You can enable proxy chaining for web proxy sessions by adding a web proxy forwarding server or server group to an
explicit web proxy policy. In a policy you can select one web proxy forwarding server or server group. All explicit web
proxy traffic accepted by this security policy is forwarded to the specified web proxy forwarding server or server group.
To add an explicit web proxy forwarding server in the GUI:
1. Go to Policy & Objects > Proxy Policy and click Create New.
2. Configure the policy settings:
Proxy Type Explicit Web
Outgoing Interface wan1
Source Internal_subnet
Destination all
Schedule always
Service webproxy
Action Accept
FortiOS 6.4.2 Administration Guide 479
Fortinet Inc.
Network
3. Enable Web Proxy Forwarding Server and select the forwarding server, (for example,fwd-srv).
4. Click OK.
Example
The following example adds a security policy that allows all users on the 10.31.101.0 subnet to use the explicit web
proxy for connections through the wan1 interface to the Internet. The policy forwards web proxy sessions to a remote
forwarding server named fwd-srv.
To add an explicit web proxy forwarding server in the CLI:
config firewall proxy-policy
edit 0
set proxy explicit-web
set dstintf "wan1"
set srcaddr "Internal_subnet"
set dstaddr "all"
set service "webproxy"
set action accept
set schedule "always"
set webproxy-forward-server "fwd-srv"
end
Using TLS 1.3 with web proxy forward servers
A FortiGate can handle TLS 1.3 traffic in both deep and certificate inspection modes.
Example
The following example demonstrates that the Squid server and the FortiGate can handle TLS 1.3 traffic.
The following output from the Squid server demonstrates that the FortiGate supports TLS 1.3 traffic and forwards the
hello retry request back to the client PC. The client PC then sends the client hello again, and the connection is
successfully established.
FortiOS 6.4.2 Administration Guide 480
Fortinet Inc.
Network
Agentless NTLM authentication for web proxy
In FortiOS, agentless Windows NT LAN Manager (NTLM) authentication includes support for the following items:
l Multiple servers
l Individual users
You can use multiple domain controller servers for the agentless NTLM. They can be used for load balancing and high
service stability.
You can also use user-based matching in groups for Kerberos and agentless NTLM. In these scenarios, FortiOS
matches the user's group information from an LDAP server.
To support multiple domain controllers for agentless NTLM using the CLI:
1. Configure an LDAP server:
config user ldap
edit "ldap-kerberos"
set server "172.18.62.177"
set cnid "cn"
set dn "dc=fortinetqa,dc=local"
set type regular
set username "CN=root,CN=Users,DC=fortinetqa,DC=local"
set password **********
next
end
2. Configure multiple domain controllers:
config user domain-controller
edit "dc1"
set ip-address 172.18.62.177
config extra-server
edit 1
set ip-address 172.18.62.220
next
FortiOS 6.4.2 Administration Guide 481
Fortinet Inc.
Network
end
set ldap-server "ldap-kerberos"
next
end
3. Create an authentication scheme and rule:
config authentication scheme
edit "au-ntlm"
set method ntlm
set domain-controller "dc1"
next
end
config authentication rule
edit "ru-ntlm"
set srcaddr "all"
set ip-based disable
set active-auth-method "au-ntlm"
next
end
4. In the proxy policy, append the user group for authorization:
config firewall proxy-policy
edit 1
set proxy explicit-web
set dstintf "port1"
set srcaddr "all"
set dstaddr "all"
set service "web"
set action accept
set schedule "always"
set groups "ldap-group"
set utm-status enable
set av-profile "av"
set ssl-ssh-profile "deep-custom"
next
end
This configuration uses a round-robin method. When the first user logs in, the FortiGate sends the authentication
request to the first domain controller. Later when another user logs in, the FortiGate sends the authentication
request to another domain controller.
5. Verify the behavior after the user successfully logs in:
# diagnose wad user list
ID: 1825, IP: 10.1.100.71, VDOM: vdom1
user name : test1
duration : 497
auth_type : Session
auth_method : NTLM
pol_id : 1 g_id : 5
user_based : 0 e
xpire : 103
LAN:
bytes_in=2167 bytes_out=7657
WAN:
bytes_in=3718 bytes_out=270
FortiOS 6.4.2 Administration Guide 482
Fortinet Inc.
Network
To support individual users for agentless NTLM using the CLI:
1. Configure an LDAP server:
config user ldap
edit "ldap-kerberos"
set server "172.18.62.177"
set cnid "cn"
set dn "dc=fortinetqa,dc=local"
set type regular
set username "CN=root,CN=Users,DC=fortinetqa,DC=local"
set password **********
next
end
2. Configure the user group and allow user-based matching:
config user group
edit "ldap-group"
set member "ldap" "ldap-kerberos"
config match
edit 1
set server-name "ldap-kerberos"
set group-name "test1"
next
end
next
end
3. Create an authentication scheme and rule:
config authentication scheme
edit "au-ntlm"
set method ntlm
set domain-controller "dc1"
next
end
config authentication rule
edit "ru-ntlm"
set srcaddr "all"
set ip-based disable
set active-auth-method "au-ntlm"
next
end
4. In the proxy policy, append the user group for authorization:
config firewall proxy-policy
edit 1
set proxy explicit-web
set dstintf "port1"
set srcaddr "all"
set dstaddr "all"
set service "web"
set action accept
set schedule "always"
set groups "ldap-group"
set utm-status enable
set av-profile "av"
set ssl-ssh-profile "deep-custom"
next
end
FortiOS 6.4.2 Administration Guide 483
Fortinet Inc.
Network
This implementation lets you configure a single user instead of a whole group. The FortiGate will now allow the user
named test1.
To verify the configuration using the CLI:
diagnose wad user list
ID: 1827, IP: 10.1.15.25, VDOM: vdom1
user name : test1
duration : 161
auth_type : Session
auth_method : NTLM
pol_id : 1
g_id : 5
user_based : 0
expire : 439
LAN:
bytes_in=1309 bytes_out=4410
WAN:
bytes_in=2145 bytes_out=544
DHCP server
A DHCP server provides an address from a defined address range to a client on the network, when requested.
You can configure one or more DHCP servers on any FortiGate interface. A DHCP server dynamically assigns IP
addresses to hosts on the network connected to the interface. The host computers must be configured to obtain their IP
addresses using DHCP.
You can configure a FortiGate interface as a DHCP relay. The interface forwards DHCP requests from DHCP clients to
an external DHCP server and returns the responses to the DHCP clients. The DHCP server must have appropriate
routing so that its response packets to the DHCP clients arrive at the unit.
For more information about options, see:
l DHCP options on page 485
l IP address assignment with relay agent information option on page 486
l DHCP client options on page 488
Configure DHCP on the FortiGate
To add a DHCP server on the GUI:
1. Go to Network > Interfaces.
2. Edit an interface.
3. Enable the DHCP Server option and configure the settings.
To add a DHCP server on the CLI:
config system dhcp server
edit 1
FortiOS 6.4.2 Administration Guide 484
Fortinet Inc.
Network
set dns-service default
set default-gateway 192.168.1.2
set netmask 255.255.255.0
set interface "port1"
config ip-range
edit 1
set start-ip 192.168.1.1
set end-ip 192.168.1.1
next
edit 2
set start-ip 192.168.1.3
set end-ip 192.168.1.254
next
end
set timezone-option default
set tftp-server "172.16.1.2"
next
end
DHCP options
When adding a DHCP server, you can include DHCP codes and options. The DHCP options are BOOTP vendor
information fields that provide additional vendor-independent configuration parameters to manage the DHCP server. For
example, you might need to configure a FortiGate DHCP server that gives out a separate option as well as an IP
address, such as an environment that needs to support PXE boot with Windows images.
The option numbers and codes are specific to the application. The documentation for the application indicates the values
to use. Option codes are represented in a option value/HEX value pairs. The option is a value between 1 and 255.
You can add up to three DHCP code/option pairs per DHCP server.
For detailed information about DHCP options, see RFC 2132, DHCP Options and BOOTP Vendor Extensions.
To configure option 252 with value http://192.168.1.1/wpad.dat using the CLI:
config system dhcp server
edit <server_entry_number>
set option1 252 687474703a2f2f3139322e3136382e312e312f777061642e646174
next
end
Option 82
The DHCP relay agent information option (option 82 in RFC 3046) helps protect the FortiGate against attacks such as
spoofing (forging) of IP addresses and MAC addresses, and DHCP IP address starvation.
This option is disabled by default. However, when dhcp-relay-service is enabled, dhcp-relay-agent-option
becomes enabled.
To configure the DHCP relay agent option using the CLI:
config system interface
edit <interface>
FortiOS 6.4.2 Administration Guide 485
Fortinet Inc.
Network
set vdom root
set dhcp-relay-service enable
set dhcp-relay-ip <ip>
set dhcp-relay-agent-option enable
set vlanid <id>
next
end
See IP address assignment with relay agent information option on page 486 for an example.
Option 42
This option specifies a list of the NTP servers available to the client by IP address.
config system dhcp server
edit 2
set ntp-service {local | default | specify}
set ntp-server1 <class_ip>
set ntp-server2 <class_ip>
set ntp-server3 <class_ip>
next
end
The NTP service options include:
l local: The IP address of the interface that the DHCP server is added to becomes the client's NTP server
IP address.
l default: Clients are assigned the FortiGate's configured NTP servers.
l specify: Specify up to three NTP servers in the DHCP server configuration.
IP address assignment with relay agent information option
Option 82 (DHCP relay information option) helps protect the FortiGate against attacks such as spoofing (or forging) of IP
and MAC addresses, and DHCP IP address starvation.
The following CLI variables are included in the config system dhcp server > config reserved-address
command:
circuit-id-type {hex | DHCP option type; hex or string (default).
string}
circuit-id <value> Option 82 circuit ID of the client that will get the reserved IP address.
Format: vlan-mod-port
l vlan: VLAN ID (2 bytes)
l mod: 1 = snoop, 0 = relay (1 byte)
l port: port number (1 byte)
FortiOS 6.4.2 Administration Guide 486
Fortinet Inc.
Network
remote-id-type {hex | DHCP option type; hex or string (default).
string}
remote-id <value> Option 82 remote ID of the client that will get the reserved IP address.
Format: the MAC address of the client.
type {mac | option82} The DHCP reserved address type; mac (default) or option82.
To create an IP address assignment rule using option 82 in the GUI:
1. Go to Network > Interfaces.
2. Edit an existing port, or create a new one.
The port Role must be LAN or Undefined.
3. Enable DHCP Server.
4. Configure the address ranges and other settings as needed.
5. Click + to expand the Advanced options.
6. In the IP Address Assignment Rules table, click Create New.
The Create New IP Address Assignment Rule pane opens.
7. Configure the new rule:
a. For the Type, select DHCP Relay Agent.
b. Enter the Circuit ID and Remote ID.
c. Enter the IP address that will be reserved.
FortiOS 6.4.2 Administration Guide 487
Fortinet Inc.
Network
8. Click OK.
To create an IP address assignment rule using option 82 with the CLI:
config system dhcp server
edit 1
set netmask 255.255.255.0
set interface "port4"
config ip-range
edit 1
set start-ip 100.100.100.1
set end-ip 100.100.100.99
next
edit 2
set start-ip 100.100.100.101
set end-ip 100.100.100.254
next
end
config reserved-address
edit 1
set type option82
set ip 100.100.100.12
set circuit-id-type hex
set circuit-id "00010102"
set remote-id-type hex
set remote-id "704ca5e477d6"
next
end
next
end
DHCP client options
When an interface is in DHCP addressing mode, DHCP client options can be configured in the CLI. For example, a
vendor class identifier (usually DCHP client option 60) can be specified so that a request can be matched by a specific
DHCP offer.
FortiOS 6.4.2 Administration Guide 488
Fortinet Inc.
Network
Multiple options can be configured, but any options not recognized by the DHCP server are discarded.
To configure client option 60 - vendor class identifier:
config system interface
edit port1
set vdom vdom1
set mode dhcp
config client-options
edit 1
set code 60
set type hex
set value aabbccdd
next
end
set type physical
set snmp-index 4
next
end
Variable Description
code <integer> DHCP client option code (0 - 255, default = 0).
See Dynamic Host Configuration Protocol (DHCP) and Bootstrap Protocol
(BOOTP) Parameters for a list of possible options.
type {hex | string | ip | DHCP client option type (default = hex).
fqdn}
value <string> DHCP client option value.
ip <ip> DHCP client option IP address. This option is only available when type is ip.
Static routes
The following topics include information about static routes:
l Deploying the Security Fabric on page 177
l Security Fabric over IPsec VPN on page 189
l Viewing and controlling network risks via topology view on page 176
l Adding a static route on page 511
l Configure VDOM-A on page 738
l Configure VDOM-A on page 747
l Adding IPsec aggregate members in the GUI on page 1291
l IPsec VPN in an HA environment on page 1286
l IPsec VPN to Azure with virtual network gateway on page 1229
l FortiGate as dialup client on page 1244
l ADVPN with BGP as the routing protocol on page 1348
l ADVPN with OSPF as the routing protocol on page 1357
l ADVPN with RIP as the routing protocol on page 1366
FortiOS 6.4.2 Administration Guide 489
Fortinet Inc.
Network
l Basic site-to-site VPN with pre-shared key on page 1199
l Site-to-site VPN with digital certificate on page 1204
l Tunneled Internet browsing on page 1272
l FortiGate multiple connector support on page 1748
Policy routes
Policy routing allows you to specify an interface to route traffic. This is useful when you need to route certain types of
network traffic differently than you would if you were using the routing table. You can use the incoming traffic's protocol,
source or destination address, source interface, or port number to determine where to send the traffic.
When a packet arrives, the FortiGate starts at the top of the policy route list and attempts to match the packet with a
policy. For a match to be found, the policy must contain enough information to route the packet. At a minimum, this
requires the outgoing interface to forward the traffic, and the gateway to route the traffic to. If one or both of these are not
specified in the policy route, then the FortiGate searches the routing table to find the best active route that corresponds
to the policy route. If no routes are found in the routing table, then the policy route does not match the packet. The
FortiGate continues down the policy route list until it reaches the end. If no matches are found, then the FortiGate does a
route lookup using the routing table.
The following topics include information about policy routes:
l Configuring a policy route on page 490
l IPsec aggregate for redundancy and traffic load-balancing on page 1295
l Use MAC addresses in SD-WAN rules and policy routes on page 556
l Using BGP tags with SD-WAN rules on page 591
Configuring a policy route
In this example, a policy route is configured to send all FTP traffic received at port1 out the port4 interface and to a next
hop router at 172.20.120.23. To route FTP traffic, the protocol is set to TCP (6) and the destination ports are set to 21
(the FTP port).
To configure a policy route in the GUI:
1. Go to Network > Policy Routes.
2. Click Create New > Policy Route.
3. Configure the following fields:
Incoming interface port1
Source Address 0.0.0.0/0.0.0.0
Destination Address 0.0.0.0/0.0.0.0
Protocol TCP
Destination ports 21 - 21
Type of service 0x00
FortiOS 6.4.2 Administration Guide 490
Fortinet Inc.
Network
Bit Mask 0x00
Outgoing interface Enable and select port4
Gateway address 172.20.120.23
4. Click OK.
To configure a policy route in the CLI:
config router policy
edit 1
set input-device "port1"
set src "0.0.0.0/0.0.0.0"
set dst "0.0.0.0/0.0.0.0"
set protocol 6
set start-port 21
set end-port 21
set gateway 172.20.120.23
set output-device "port4"
set tos 0x00
set tos-mask 0x00
next
end
Moving a policy route
A routing policy is added to the bottom of the table when it is created. Routing policies can be moved to a different
location in the table to change the order of preference. In this example, routing policy 3 will be moved before routing
policy 2.
FortiOS 6.4.2 Administration Guide 491
Fortinet Inc.
Network
To move a policy route in the GUI:
1. Go to Network > Policy Routes.
2. In the table, select the policy route.
3. Drag the selected policy route to the desired position.
To move a policy route in the CLI:
config router policy
move 3 after 1
end
RIP
The following topics include information about Routing Information Protocol (RIP):
l ADVPN with RIP as the routing protocol on page 1366
OSPF
The following topics include information about Open Shortest Path First (OSPF):
l OSPF with IPsec VPN for network redundancy on page 1278
l IPsec aggregate for redundancy and traffic load-balancing on page 1295
l ADVPN with OSPF as the routing protocol on page 1357
BGP
The following topics include information about Border Gateway Protocol (BGP):
l ADVPN and shortcut paths on page 612
l ADVPN with BGP as the routing protocol on page 1348
l Applying BGP route-map to multiple BGP neighbors on page 603
l BGP multiple path support on page 594
FortiOS 6.4.2 Administration Guide 492
Fortinet Inc.
Network
l Configuring RADIUS SSO authentication on page 1553
l Controlling traffic with BGP route mapping and service rules on page 597
l IBGP and EBGP support in VRF on page 609
l IKEv2 IPsec site-to-site VPN to an AWS VPN gateway on page 1222
l Route leaking between VRFs on page 506
l SD-WAN related diagnose commands on page 695
l Using BGP tags with SD-WAN rules on page 591
Multicast
The following topics include information about multicast:
l Multicast routing and PIM support on page 493
l Configuring multicast forwarding on page 494
Multicast routing and PIM support
Multicasting (also called IP multicasting) consists of using a single multicast source to send data to many receivers.
Multicasting can be used to send data to many receivers simultaneously while conserving bandwidth and reducing
network traffic. Multicasting can be used for one-way delivery of media streams to multiple receivers and for one-way
data transmission for news feeds, financial information, and so on. Many dynamic routing protocols such as RIPv2,
OSPF, and EIGRP use multicasting to share hello packets and routing information.
A FortiGate can operate as a Protocol Independent Multicast (PIM) version 2 router. FortiGates support PIM sparse
mode (RFC 4601) and PIM dense mode (RFC 3973), and can service multicast servers or receivers on the network
segment to which a FortiGate interface is connected. Multicast routing is not supported in transparent mode.
To support PIM communications, the sending and receiving applications, and all connecting PIM routers in between,
must be enabled with PIM version 2. PIM can use static routes, RIP, OSPF, or BGP to forward multicast packets to their
destinations. To enable source-to-destination packet delivery, sparse mode or dense mode must be enabled on the PIM
router interfaces. Sparse mode routers cannot send multicast messages to dense mode routers. If the FortiGate is
located between a source and a PIM router, between two PIM routers, or is connected directly to a receiver, you must
manually create a multicast policy to pass encapsulated (multicast) packets or decapsulated data (IP traffic) between the
source and destination.
PIM domains
A PIM domain is a logical area comprising a number of contiguous networks. The domain contains at least one bootstrap
router (BSR), and if sparse mode is enabled, a number of rendezvous points (RPs) and designated routers (DRs). When
PIM is enabled, the FortiGate can perform any of these functions at any time as configured.
A PIM domain can be configured in the GUI by going to Network > Multicast, or in the CLI using config router
multicast. Note that PIM version 2 must be enabled on all participating routers between the source and receivers. Use
config router multicast to set the global operating parameters.
When PIM is enabled, the FortiGate allocates memory to manage mapping information. The FortiGate communicates
with neighboring PIM routers to acquire mapping information and, if required, processes the multicast traffic associated
with specific multicast groups.
FortiOS 6.4.2 Administration Guide 493
Fortinet Inc.
Network
Instead of sending multiple copies of generated IP traffic to more than one specific IP destination address, PIM-enabled
routers encapsulate the data and use a Class D multicast group address (224.0.0.0 to 239.255.255.255) to forward
multicast packets to multiple destinations. A single stream of data can be sent because one destination address is used.
Client applications receive multicast data by requesting that the traffic destined for a certain multicast group address be
delivered to them.
Configuring multicast forwarding
There is sometimes confusion between the terms forwarding and routing. These two functions should not take place at
the same time. Multicast forwarding should be enabled when the FortiGate is in NAT mode and you want to forward
multicast packets between multicast routers and receivers. However, this function should not be enabled when the
FortiGate itself is operating as a multicast router, or has an applicable routing protocol that uses multicast.
Multicast forwarding is not supported on enhanced MAC VLAN interfaces. To use multicast with enhanced MAC VLAN
interfaces, use PIM (Multicast routing and PIM support on page 493).
There are two steps to configure multicast forwarding:
1. Enable multicast forwarding
2. Configure multicast policies
Enabling multicast forwarding
Multicast forwarding is enabled by default. If a FortiGate is operating in transparent mode, adding a multicast policy
enables multicast forwarding. In NAT mode you must use the multicast-forward setting to enable or disable
multicast forwarding.
Multicast forwarding in NAT mode
When multicast-forward is enabled, the FortiGate forwards any multicast IP packets in which the TTL is 2 or higher
to all interfaces and VLAN interfaces, except the receiving interface. The TTL in the IP header will be reduced by 1. Even
though the multicast packets are forwarded to all interfaces, you must add multicast policies to allow multicast packets
through the FortiGate.
To enable multicast forwarding in NAT mode:
config system settings
set multicast-forward enable
end
Prevent the TTL for forwarded packets from being changed
You can use the multicast-ttl-notchange option so that the FortiGate does not increase the TTL value for
forwarded multicast packets. Use this option only if packets are expiring before reaching the multicast router.
To prevent the TTL for forwarded packets from being changed:
config system settings
set multicast-ttl-notchange enable
end
FortiOS 6.4.2 Administration Guide 494
Fortinet Inc.
Network
Disable multicast traffic from passing through the FortiGate without a policy check in
transparent mode
In transparent mode, the FortiGate does not forward frames with multicast destination addresses. The FortiGate should
not interfere with the multicast traffic used by routing protocols, streaming media, or other multicast communication. To
avoid any issues during transmission, you can disable multicast-skip-policy and configure multicast security
policies.
To disable multicast traffic from passing through the FortiGate without a policy check in transparent
mode:
config system settings
set multicast-skip-policy disable
end
Configuring multicast policies
Multicast packets require multicast policies to allow packets to pass from one interface to another. Similar to firewall
policies, in a multicast policy you specify the source and destination interfaces, and the allowed address ranges for the
source and destination addresses of the packets. You can also use multicast policies to configure source NAT and
destination NAT for multicast packets.
Keep the following in mind when configuring multicast policies:
l The matched forwarded (outgoing) IP multicast source IP address is changed to the configured IP address.
l The snat setting is optional. Use it when SNAT is needed.
Sample basic policy
In this basic policy, multicast packets received on an interface are flooded unconditionally to all interfaces on the
forwarding domain, except the incoming interface.
config firewall multicast-policy
edit 1
set srcintf "any"
set dstintf "any"
set srcaddr "all"
set dstaddr "all"
next
end
The destination address (dstaddr) is a multicast address object. The all option corresponds to all multicast addresses
in the range 224.0.0.0-239.255.255.255.
Sample policy with specific source and destination interfaces
This multicast policy only applies to the source port wan1 and the destination port internal.
config firewall multicast-policy
edit 1
set srcintf "wan1"
set dstintf "internal"
set srcaddr "all"
set dstaddr "all"
FortiOS 6.4.2 Administration Guide 495
Fortinet Inc.
Network
next
end
Sample policy with specific source address object
In this policy, packets are allowed to flow from wan1 to internal, and sourced by the address 172.20.120.129, which is
represented by the example_addr-1 address object.
config firewall multicast-policy
edit 1
set srcintf "wan1"
set dstintf "internal"
set srcaddr "example_addr-1"
set dstaddr "all"
next
end
Sample detailed policy
This policy accepts multicast packets that are sent from a PC with IP address 192.168.5.18 to destination address range
239.168.4.0-255. The policy allows the multicast packets to enter the internal interface and then exit the external
interface. When the packets leave the external interface, their source address is translated to 192.168.18.10.
config firewall address
edit "192.168.5.18"
set subnet 192.168.5.18 255.255.255.255
next
end
config firewall multicast-address
edit "239.168.4.0"
set start-ip 239.168.4.0
set end-ip 239.168.4.255
next
end
config firewall multicast-policy
edit 1
set srcintf "internal"
set dstintf "external"
set srcaddr "192.168.5.18"
set dstaddr "239.168.4.0"
set snat enable
set snat-ip 192.168.18.10
next
end
To configure multicast policies in the GUI, enable Multicast Policy in System > Feature
Visibility.
FortiOS 6.4.2 Administration Guide 496
Fortinet Inc.
Network
FortiExtender
The following topics include information about FortiExtender:
l Adding a FortiExtender on page 497
l Data plan profiles on page 499
Adding a FortiExtender
To add a FortiExtender to the FortiGate, create a virtual FortiExtender interface, then add a FortiExtender and assign the
interface to the modem. Like other interface types, the FortiExtender interface can be used in static routes, SD-WAN
(see Manage dual FortiExtender devices), policies, and other functions.
To create a virtual FortiExtender interface in the GUI:
1. Go to Network > Interfaces and click Create New > FortiExtender.
2. Enter a name for the interface.
3. Configure the remaining settings as needed. See Interface settings on page 383 for more details.
4. Click OK.
To edit a FortiExtender in the GUI:
FortiExtenders can only be manually added in the CLI.
1. Go to Network > FortiExtender and edit the FortiExtender.
2. Adjust the settings as required. See the FortiExtender Administration Guide for more information.
FortiOS 6.4.2 Administration Guide 497
Fortinet Inc.
Network
3. Click OK.
4. In the extenders list, right-click on the FortiExtender and select Diagnostics and Tools to review the modem and SIM
status, and other details about the FortiExtender.
To create a virtual FortiExtender interface in the CLI:
config system interface
edit "fext"
set vdom "root"
set mode dhcp
set allowaccess ping https speed-test
set type fext-wan
set estimated-upstream-bandwidth 1000
set estimated-downstream-bandwidth 500
next
end
To configure the FortiExtender in the CLI:
config extender-controller extender
edit "FX211E0000000000"
set id "FX211E0000000000"
set authorized enable
config modem1
set ifname "fext"
end
next
end
To verify the modem settings in the CLI:
get extender modem-status FX211E0000000000 1
Modem 0:
physical_port: 2-1.2
manufacture: Sierra Wireless, Incorporated
product: Sierra Wireless, Incorporated
....
FortiOS 6.4.2 Administration Guide 498
Fortinet Inc.
Network
Data plan profiles
The data plan profile allows users to configure connectivity settings based on modem, carrier, slot, SIM ID, or cost. Users
can also specify billing details related to the data plan, as well as smart switch thresholds to define when to switch over to
a different SIM.
A FortiExtender has multiple SIM card slots. Certain models also have multiple modems. Essentially, each modem can
make one connection with one of the two SIMs associated with the modem. The data plan profile allows users to create
general configurations that work across multiple SIMs, or specific profiles that work on a specific SIM. First, the data plan
matches the criteria based on the modem ID and type.
Syntax
config extender-controller dataplan
edit <name>
set modem-id {modem1 | modem2 | all}
set type {carrier | slot | iccid | generic}
next
end
Variable Description
set modem-id (Available on in the Select the match criterion based on the modem:
GUI) l modem1: Use modem 1.
l modem2: Use modem 2.
l all: Use both modems (default).
set type (Type in the GUI) Select the match criterion based on the type:
carrier: Assign by SIM carrier.
slot: Assign to SIM slot 1 or 2.
iccid: Assign to a specific SIM by ICCID.
generic: Compatible with any SIM (default). Assigned if no other data plan
matches the chosen SIM.
When a modem connects to the network through a SIM, it will read the SIM information and try to match a data plan
based on the modem ID and type. It then uses the data plan connectivity settings to connect (authentication, PDN type,
preferred subnet, APN, private network). The billing details (such as the monthly data limit) and smart switch threshold
settings define how the SIMs will be switched.
Multiple data plans can be configured:
Once the FortiExtender is controlled by the FortiGate, the data plan is sent to the FortiExtender. The format is identical
between devices.
FortiOS 6.4.2 Administration Guide 499
Fortinet Inc.
Network
To configure a data plan in the GUI:
1. Go to Network > FortiExtender and in the top menu, click Data plans.
2. Click Create New.
3. Enter a name and ensure that the Status is enabled.
4. Set Available on to All Modems or Modem 1.
5. Set the plan Type. If Carrier is selected, enter the carrier name. If ICCID is selected, enter the ICCID number.
6. Configure the other settings as needed.
7. Click OK.
To configure a data plan in the CLI:
config extender-controller dataplan
edit "Telus-modem1"
set modem-id modem1
set type carrier
set carrier "Telus"
set capacity 2000
set billing-date 30
next
edit "Fido-modem2"
set modem-id modem2
set type carrier
set carrier "Generic"
set capacity 3000
next
edit "Bell"
set type carrier
set carrier "Bell"
set APN "pda.bell.ca"
set capacity 6000
next
end
FortiOS 6.4.2 Administration Guide 500
Fortinet Inc.
Network
Direct IP support for LTE/4G
Direct IP is a public IP address that is assigned to a computing device, which allows the device to directly access the
internet.
When an LTE modem is enabled in FortiOS, a DHCP interface is created. As a result, the FortiGate can acquire direct IP
(which includes IP, DNS, and gateway) from the LTE network carrier.
Since some LTE modems require users to input the access point name (APN) for the LTE network, the LTE modem
configuration allows you to set the APN.
LTE modems can only be enabled by using the CLI.
To enable direct IP support using the CLI:
1. Enable the LTE modem:
config system lte-modem
set status enable
end
2. Check that the LTE interface was created:
config system interface
edit "wwan"
set vdom "root"
set mode dhcp
set status down
set distance 1
set type physical
set snmp-index 23
next
end
Shortly after the LTE modem joins its carrier network, wwan is enabled and granted direct IP:
# config system interface
(interface) # edit wwan
(wwan) # get
name : wwan
....
ip : 100.112.75.43 255.255.255.248
....
status : up
....
defaultgw : enable
DHCP Gateway : 100.112.75.41
Lease Expires : Thu Feb 21 19:33:27 2019
dns-server-override : enable
Acquired DNS1 : 184.151.118.254
Acquired DNS2 : 70.28.245.227
....
FortiOS 6.4.2 Administration Guide 501
Fortinet Inc.
Network
PCs can reach the internet via the following firewall policy:
config firewall policy
....
edit 5
set name "LTE"
set srcintf "port9"
set dstintf "wwan"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set utm-status enable
set fsso disable
set nat enable
next
end
Sample LTE interface
When an LTE modem is enabled, you can view the LTE interface in the GUI and check the acquired IP, DNS, and
gateway.
To view the LTE interface in the GUI:
1. Go to Network > Interfaces.
2. Double-click the LTE interface to view the properties.
3. Look in the Address section to view the:
a. Obtained IP
b. Acquired DNS
c. Default Gateway
4. Click Return.
FortiOS 6.4.2 Administration Guide 502
Fortinet Inc.
Network
To configure the firewall policy that uses the LTE interface:
1. Go to Policy & Objects > Firewall Policy.
2. Double-click the LTE policy. The Edit Policy pane opens.
3. In the Outgoing Interface field, select the interface (wwan in this example).
4. Configure the rest of the policy as needed.
5. Click OK.
Limitations
l Most LTE modems have a preset APN in their SIM card. Therefore, the APN does not need to be set in the FortiOS
configuration. In cases where the internet cannot be accessed, consult with your carrier and set the APN in the LTE
modem configuration (for example, inet.bell.ca):
config system lte-modem
set status enable
set apn "inet.bell.ca"
end
l Some models, such as the FortiGate 30E-3G4G, have built-in LTE modems. In this scenario, the LTE modem is
enabled by default. The firewall policy via the LTE interface is also created by default. Once you plug in a SIM card,
your network devices can connect to the internet.
Sample FortiGate 30E-3G4G default configuration:
config system lte-modem
set status enable
set extra-init ''
set manual-handover disable
set force-wireless-profile 0
set authtype none
set apn ''
set modem-port 255
set network-type auto
FortiOS 6.4.2 Administration Guide 503
Fortinet Inc.
Network
set auto-connect disable
set gpsd-enabled disable
set data-usage-tracking disable
set gps-port 255
end
config firewall policy
....
edit 3
set srcintf "internal"
set dstintf "wwan"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set nat enable
next
end
LLDP reception
Natively, device detection can scan LLDP as a source for device identification. However, the FortiGate does not read or
store the full information. Enabling LLDP reception allows the FortiGate to receive and store LLDP messages, learn
about active neighbors, and makes the LLDP information available via the CLI, REST API, and SNMP.
You will need to enable device-identification at the interface level, and then lldp-reception can be enabled
on three levels: globally, per VDOM, or per interface.
To configure device identification on an interface:
config system interface
edit <port>
set device-identification enable
next
end
To configure LLDP reception globally:
config system global
set lldp-reception enable
end
To configure LLDP reception per VDOM:
config system setting
set lldp-reception enable
end
FortiOS 6.4.2 Administration Guide 504
Fortinet Inc.
Network
To configure LLDP reception per interface:
config system interface
edit <port>
set lldp-reception enable
next
end
To view the LLDP information in the GUI:
1. Go to Dashboard > Users & Devices.
2. Hover over the Device Inventory widget, and click Expand to Full Screen.
To view the received LLDP information in the CLI:
# diagnose user device list
hosts
vd root/0 44:0a:a0:0a:0a:0a gen 3 req S/2
created 10290s gen 1 seen 0s port3 gen 1
ip 172.22.22.22 src lldp
type 20 'Other Network Device' src lldp id 155 gen 2
os 'Artist EOS ' version '4.20.4' src lldp id 155
host 'artist' src lldp
To view additional information about LLDP neighbors and ports:
# diagnose lldprx neighbor {summary | details | clear}
# diagnose lldprx port {details | summary | neighbor | filter}
# diagnose lldprx port neighbor {summary | details}
Note that the port index in the output corresponds to the port index from the following command:
# diagnose netlink interface list port2 port3 | grep index
if=port2 family=00 type=1 index=4 mtu=1500 link=0 master=0
if=port3 family=00 type=1 index=5 mtu=1500 link=0 master=0
To view the received LLDP information in the REST API:
{
"http_method":"GET",
"results":[
{
"mac":"90:9c:9c:c9:c9:90",
"chassis_id":"90:9C:9C:C9:C9:90",
"port":19,
FortiOS 6.4.2 Administration Guide 505
Fortinet Inc.
Network
"port_id":"port12",
"port_desc":"port12",
"system_name":"S124DN3W00000000",
"system_desc":"FortiSwitch-124D v3.6.6,build0416,180515 (GA)",
"ttl":120,
"addresses":[
{
"type":"ipv4",
"address":"192.168.1.99"
}
]
}
],
"vdom":"root",
"path":"network",
"name":"lldp",
"action":"neighbors",
"status":"success",
"serial":"FG201E4Q00000000",
"version":"v6.2.0",
"build":866
}
{
"http_method":"GET",
"results":[
{
"name":"port1",
"rx":320,
"neighbors":1
}
],
"vdom":"root",
"path":"network",
"name":"lldp",
"action":"ports",
"mkey":"port1",
"status":"success",
"serial":"FG201E4Q00000000",
"version":"v6.2.0",
"build":866
}
Route leaking between VRFs
This feature provides generic route leaking capabilities between locally defined VRFs (VRF-lite). If VRF leaking is not
configured, VRFs are isolated.
In this example, interface npu0_vlink0 belongs to VRF 10 and is used to leak 1.2.2.2/32 from VRF10 to VRF20, and
interface npu0_vlink1 belongs to VRF 20 and is used to leak 172.28.1.0/24 from VRF20 to VRF10. So, VRF10 can see
172.28.1.0/24, and VRF20 can see 1.2.2.2/32.
FortiOS 6.4.2 Administration Guide 506
Fortinet Inc.
Network
To configure VRF leaking:
1. Configure the prefix list and route map to filter what will be leaked:
config router prefix-list
edit "1"
config rule
edit 1
set prefix 1.2.2.2 255.255.255.255
next
end
next
edit "2"
config rule
edit 1
set prefix 172.28.1.0 255.255.255.0
next
end
next
end
config router route-map
edit "from10"
config rule
edit 1
set match-ip-address "1"
next
end
next
edit "from20"
config rule
edit 1
set match-ip-address "2"
next
end
next
end
2. Configure the VDOM link interfaces for the leaking and routing:
config system interface
edit "npu0_vlink0"
set vdom "root"
set vrf 10
set ip 172.16.201.1 255.255.255.0
set allowaccess ping https ssh snmp http
next
edit "npu0_vlink1"
set vdom "root"
set vrf 20
set ip 172.16.201.2 255.255.255.0
set allowaccess ping https ssh snmp http telnet
next
end
FortiOS 6.4.2 Administration Guide 507
Fortinet Inc.
Network
3. Configure the BGP VRF leak:
config router bgp
set as 44
set router-id 4.4.4.4
config neighbor
edit "172.16.200.1"
set soft-reconfiguration enable
set remote-as 11
set update-source "port1"
next
edit "172.16.202.1"
set soft-reconfiguration enable
set remote-as 22
set update-source "port3"
next
end
config vrf-leak
edit "10"
config target
edit "20"
set route-map "from10"
set interface "npu0_vlink0"
next
end
next
edit "20"
config target
edit "10"
set route-map "from20"
set interface "npu0_vlink1"
next
end
next
end
end
4. Confirm that the filtered routed leaked as expected:
# get router info routing-table all
Routing table for VRF=10
B 1.1.1.1/32 [20/0] via 172.16.200.1, port1, 01:03:16
B 1.2.2.2/32 [20/0] via 172.16.200.1, port1, 01:03:16
B 172.28.1.0/24 [20/0] via 172.16.201.2, npu0_vlink0, 00:00:17
<<<<<<<<<<<<<<Leaked into VRF10 from VRF20
Routing table for VRF=20
B 1.2.2.2/32 [20/0] via 172.16.201.1, npu0_vlink1, 00:00:15 <<<<<<<<<<<<<<Leaked
into VRF 20 from VRF10
B 172.28.1.0/24 [20/0] via 172.16.202.1, port3, 01:03:16
B 172.28.2.0/24 [20/0] via 172.16.202.1, port3, 01:03:16
FortiOS 6.4.2 Administration Guide 508
Fortinet Inc.
SD-WAN
SD-WAN is a software-defined approach to managing Wide-Area Networks (WAN). It allows you to offload internet-
bound traffic, meaning that private WAN services remain available for real-time and mission critical applications. This
added flexibility improves traffic flow and reduces pressure on the network.
SD-WAN platforms create hybrid networks that integrate broadband and other network services into the corporate WAN
while maintaining the performance and security of real-time and sensitive applications.
SD-WAN with Application Aware Routing can measure and monitor the performance of multiple services in a hybrid
network. It uses application routing to offer more granular control of where and when an application uses a specific
service, allowing better use of the overall network.
Some of the key benefits of SD-WAN include:
l Reduced cost with transport independence across MPLS, 3G/4G LTE, and others.
l Improve business application performance thanks to increased availability and agility.
l Optimized user experience and efficiency with SaaS and public cloud applications.
SD-WAN has 4 objects:
l SD-WAN zones
SD-WAN is divided into zones. SD-WAN member interfaces are assigned to zones, and zones are used in policies
as source and destination interfaces. You can define multiple zones to group SD-WAN interfaces together, allowing
logical groupings for overlay and underlay interfaces. See SD-WAN zones on page 520.
l SD-WAN members
Also called interfaces, SD-WAN members are the ports and interfaces that are used to run traffic. At least one
interface must be configured for SD-WAN to function; up to 255 member interfaces can be configured. See
Configuring the SD-WAN interface on page 510.
l Performance SLAs
Also called health-checks, performance SLAs are used to monitor member interface link quality, and to detect link
failures. They can be used to remove routes, and to reroute traffic when an SD-WAN member cannot detect the
server. They can also be used in SD-WAN rules to select the preferred member interface for forwarding traffic. See
Performance SLA on page 525.
l SD-WAN rules
Also called services, SD-WAN rules are used to control path selection. Specific traffic can be dynamically sent to the
best link, or use a specific route. There are five modes:
l auto: Assign interfaces a priority based on quality.
l manual: Assign interfaces a priority manually.
l priority: Assign interfaces a priority based on the link-cost-factor quality of the interface.
l sla: Assign interfaces a priority based on selected SLA settings.
l load-balance: Distribute traffic among all available links based on the load balance algorithm.
See SD-WAN rules on page 543.
SD-WAN quick start
FortiOS 6.4.2 Administration Guide 509
Fortinet Inc.
SD-WAN
This section provides an example of how to start using SD-WAN for load balancing and redundancy.
In this example, two ISP internet connections, wan1 (DHCP) and wan2 (static), use SD-WAN to balance traffic between
them at 50% each.
1. Configuring the SD-WAN interface on page 510
2. Adding a static route on page 511
3. Selecting the implicit SD-WAN algorithm on page 511
4. Configuring firewall policies for SD-WAN on page 512
5. Link monitoring and failover on page 513
6. Results on page 514
7. Configuring SD-WAN in the CLI on page 518
Configuring the SD-WAN interface
First, SD-WAN must be enabled and member interfaces must be selected and added to a zone. The selected FortiGate
interfaces can be of any type (physical, aggregate, VLAN, IPsec, and others), but must be removed from any other
configurations on the FortiGate.
In this step, two interfaces are configured and added to the default SD-WAN zone (virtual-wan-link) as SD-WAN member
interfaces. This example uses a mix of static and dynamic IP addresses; your deployment could also use only one or the
other.
Once the SD-WAN members are created and added to a zone, the zone can be used in firewall policies, and the whole
SD-WAN can be used in static routes.
To configure SD-WAN members:
1. Configure the wan1 and wan2 interfaces. See Interface settings on page 383 for details.
a. Set the wan1 interface Addressing mode to DHCP and Distance to 10.
By default, a DHCP interface has a distance of 5, and a static route has a distance of
10. It is important to account for this when configuring your SD-WAN for 50/50 load
balancing by setting the DHCP interface's distance to 10.
b. Set the wan2 interface IP/Netmask to 10.100.20.1 255.255.255.0.
2. Go to Network > SD-WAN Zones. Routing for each SD-WAN interface is defined here.
3. Click Create New > SD-Member.
FortiOS 6.4.2 Administration Guide 510
Fortinet Inc.
SD-WAN
4. Set the Interface to wan1.
5. Leave SD-WAN Zone as virtual-wan-link.
6. As wan1 uses DHCP, leave Gateway set to 0.0.0.0.
If IPv6 visibility is enabled in the GUI, an IPv6 gateway can also be added for each member. See Feature visibility
on page 821 for details.
7. Leave Cost as 0.
The Cost field is used by the Lowest Cost (SLA) strategy. The link with the lowest cost is chosen to pass traffic. The
lowest possible Cost is 0.
8. Set Status to Enable, and click OK.
9. Repeat the above steps for wan2, setting Gateway to the ISP's gateway: 10.100.20.2.
Adding a static route
You must configure a default route for the SD-WAN. The default gateways for each SD-WAN member interface do not
need to be defined in the static routes table. FortiGate will decide what route or routes are preferred using Equal Cost
Multi-Path (ECMP) based on distance and priority.
To create a static route for SD-WAN:
1. Go to Network > Static Routes.
2. Click Create New. The New Static Route page opens.
3. Set Destination to Subnet, and leave the IP address and subnet mask as 0.0.0.0/0.0.0.0.
4. From the Interface drop-down list, select virtual-wan-link.
5. Ensure that Status is Enabled.
6. Click OK.
Selecting the implicit SD-WAN algorithm
FortiOS 6.4.2 Administration Guide 511
Fortinet Inc.
SD-WAN
SD-WAN rules define specific routing options to route traffic to an SD-WAN member.
If no routing rules are defined, the default Implicit rule is used. It can be configured to use one of five different load
balancing algorithms. See Implicit rule on page 543 for more details and examples.
This example shows four methods to equally balance traffic between the two WAN connections. Go to Network > SD-
WAN Rules and edit the sd-wan rule to select the method that is appropriate for your requirements.
l Source IP (CLI command: source-ip-based):
Select this option to balance traffic equally between the SD-WAN members according to a hash algorithm based on
the source IP addresses.
l Session (weight-based):
Select this option to balance traffic equally between the SD-WAN members by the session numbers ratio among its
members. Use weight 50 for each of the 2 members.
l Source-Destination IP (source-dest-ip-based):
Select this option to balance traffic equally between the SD-WAN members according to a hash algorithm based on
the source and destination IP addresses.
l Volume (measured-volume-based):
Select this option to balance traffic equally between the SD-WAN members according to the bandwidth ratio among
its members.
Configuring firewall policies for SD-WAN
SD-WAN zones can be used in policies as source and destination interfaces. Individual SD-WAN members cannot be
used in policies.
You must configure a policy that allows traffic from your organization's internal network to the SD-WAN zone. Policies
configured with the SD-WAN zone apply to all SD-WAN interface members in that zone.
To create a firewall policy for SD-WAN:
1. Go to Policy & Objects > Firewall Policy.
2. Click Create New. The New Policy page opens.
FortiOS 6.4.2 Administration Guide 512
Fortinet Inc.
SD-WAN
3. Configure the following:
Name Enter a name for the policy.
Incoming Interface internal
Outgoing Interface virtual-wan-link
Source all
Destination all
Schedule always
Service ALL
Action ACCEPT
Firewall / Network Options Enable NAT and set IP Pool Configuration to Use Outgoing Interface Address.
Security Profiles Apply profiles as required.
Logging Options Enable Log Allowed Traffic and select All Sessions. This allows you to verify
results later.
4. Enable the policy, then click OK.
Link monitoring and failover
Performance SLA link monitoring measures the health of links that are connected to SD-WAN member interfaces by
sending probing signals through each link to a server, and then measuring the link quality based on latency, jitter, and
packet loss. If a link is broken, the routes on that link are removed and traffic is routed through other links. When the link
is working again, the routes are re-enabled. This prevents traffic being sent to a broken link and lost.
In this example, the detection server IP address is 208.91.112.53. A performance SLA is created so that, if ping fails per
the metrics defined, the routes to that interface are removed and traffic is detoured to the other interface. The ping
protocol is used, but other protocols could also be selected as required.
FortiOS 6.4.2 Administration Guide 513
Fortinet Inc.
SD-WAN
To configure a performance SLA:
1. Go to Network > Performance SLA.
2. Click Create New. The New Performance SLA page opens.
3. Enter a name for the SLA and set Protocol to Ping.
4. In the Server field, enter the detection server IP address (208.91.112.53 in this example).
5. In the Participants field, select Specify and add wan1 and wan2.
SLA targets are not required for link monitoring.
6. Configure the required metrics in Link Status.
7. Ensure that Update static route is enabled. This disables static routes for the inactive interface and restores routes
on recovery.
8. Click OK.
Results
The following GUI pages show the function of the SD-WAN and can be used to confirm that it is setup and running
correctly:
l Interface usage on page 514
l Performance SLA on page 516
l Routing table on page 517
l Firewall policy on page 518
Interface usage
Go to Network > SD-WAN Zones to review the SD-WAN interfaces' usage.
FortiOS 6.4.2 Administration Guide 514
Fortinet Inc.
SD-WAN
Bandwidth
Select Bandwidth to view the amount of downloaded and uploaded data for each interface.
Volume
Select Volume to see donut charts of the received and sent bytes on the interfaces.
Sessions
Select Sessions to see a donut chart of the number of active sessions on each interface.
FortiOS 6.4.2 Administration Guide 515
Fortinet Inc.
SD-WAN
Performance SLA
Go to Network > Performance SLA and select the SLA from the table (server in this example) to view the packet loss,
latency, and jitter on each SD-WAN member in the health check server.
Packet loss
Select Packet Loss to see the percentage of packets lost for each member.
Latency
Select Latency to see the current latency, in milliseconds, for each member.
FortiOS 6.4.2 Administration Guide 516
Fortinet Inc.
SD-WAN
Jitter
Select Jitter to see the jitter, in milliseconds, for each member.
Routing table
Go to Dashboard > Network and expand the Static & Dynamic Routing widget to review all static and dynamic routes.
For more information about the widget, see Static & Dynamic Routing Monitor on page 71.
FortiOS 6.4.2 Administration Guide 517
Fortinet Inc.
SD-WAN
Firewall policy
Go to Policy & Objects > Firewall Policy to review the SD-WAN policy.
Configuring SD-WAN in the CLI
This example can be entirely configured using the CLI.
To configure SD-WAN in the CLI:
1. Configure the wan1 and wan2 interfaces:
config system interface
edit "wan1"
set alias to_ISP1
set mode dhcp
set distance 10
next
edit "wan2"
set alias to_ISP2
set ip 10.100.20.1 255.255.255.0
next
end
2. Enable SD-WAN and add the interfaces as members:
config system sdwan
set status enable
config members
edit 1
set interface "wan1"
next
edit 2
set interface "wan2"
set gateway 10.100.20.2
next
end
end
If no SD-WAN zone is specified, members are added to the default virtual-wan-link zone.
FortiOS 6.4.2 Administration Guide 518
Fortinet Inc.
SD-WAN
3. Create a static route for SD-WAN:
config router static
edit 1
set sdwan enable
next
end
4. Select the implicit SD-WAN algorithm:
config system sdwan
set load-balance-mode {source-ip-based | weight-based | source-dest-ip-based |
measured-volume-based}
end
5. Create a firewall policy for SD-WAN:
config firewall policy
edit <policy_id>
set name <policy_name>
set srcintf "internal"
set dstintf "virtual-wan-link"
set srcaddr all
set dstaddr all
set action accept
set schedule always
set service ALL
set utm-status enable
set ssl-ssh-profile <profile_name>
set av-profile <profile_name>
set webfilter-profile <profile_name>
set dnsfilter-profile <profile_name>
set emailfilter-profile <profile_name>
set ips_sensor <sensor_name>
set application-list <app_list>
set voip-profile <profile_name>
set logtraffic all
set nat enable
set status enable
next
end
6. Configure a performance SLA:
config system sdwan
config health-check
edit "server"
set server "208.91.112.53"
set update-static-route enable
set members 1 2
next
end
end
FortiOS 6.4.2 Administration Guide 519
Fortinet Inc.
SD-WAN
Results
To view the routing table:
# get router info routing-table all
Routing table for VRF=0
Codes: K - kernel, C - connected, S - static, R - RIP, B - BGP
O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default
S* 0.0.0.0/0 [1/0] via 172.16.20.2, wan1
[1/0] via 10.100.20.2, wan2
C 10.100.20.0/24 is directly connected, wan2
C 172.16.20.2/24 is directly connected, wan1
C 192.168.0.0/24 is directly connected, internal
To diagnose the Performance SLA status:
FGT # diagnose sys sdwan health-check
Health Check(server):
Seq(1): state(alive), packet-loss(0.000%) latency(15.247), jitter(5.231) sla_map=0x0
Seq(2): state(alive), packet-loss(0.000%) latency(13.621), jitter(6.905) sla_map=0x0
SD-WAN zones
SD-WAN is divided into zones. SD-WAN member interfaces are assigned to zones, and zones are used in policies as
source and destination interfaces.
You can define multiple zones to group SD-WAN interfaces together, allowing logical groupings for overlay and underlay
interfaces. The zones are used in firewall policies to allow for more granular control. SD-WAN members cannot be used
directly in policies.
Static routes use the entire SD-WAN, not just individual zones or members.
In the CLI:
l config system sdwan has replaced config system virtual-wan-link.
l diagnose sys sdwan has replaced diagnose sys virtual-wan-link.
l When configuring a static route, the sdwan variable has replaced the virtual-wan-
link variable.
When the Security Fabric is configured, SD-WAN zones are included in the Security Fabric topology views.
FortiOS 6.4.2 Administration Guide 520
Fortinet Inc.
SD-WAN
To create an SD-WAN zone in the GUI:
1. Go to Network > SD-WAN Zones.
The default SD-WAN zone is virtual-wan-link.
2. Click Create New > SD-WAN Zone.
3. Enter a name for the new zone.
4. If SD-WAN members have already been created, add the required members to the zone.
Members can also be added to the zone after it has been created by editing the zone, or when creating or editing the
member.
5. Click OK.
FortiOS 6.4.2 Administration Guide 521
Fortinet Inc.
SD-WAN
To create an SD-WAN interface member in the GUI:
1. Go to Network > SD-WAN Zones.
2. Click Create New > SD-WAN Member.
3. Select an interface.
The interface can also be left as none and selected later, or click +VPN to create an IPsec VPN for the SD-WAN
member.
4. Select the SD-WAN zone that the member will join. A member can also be moved to a different zone at any time.
5. Set the Gateway, Cost, and Status as required.
6. Click OK.
The interface list at Network > Interfaces shows the SD-WAN zones and their members.
To create a policy using the SD-WAN zone in the GUI:
1. Go to Policy & Objects > Firewall Policy, Policy & Objects > Proxy Policy, or Policy & Objects > Security Policy.
2. Click Create New .
3. Configure the policy settings as needed, selecting an SD-WAN zone or zones for the incoming and/or outgoing
interface.
FortiOS 6.4.2 Administration Guide 522
Fortinet Inc.
SD-WAN
4. Click OK.
To view SD-WAN zones in a Security Fabric topology:
1. Go to Security Fabric > Physical Topology or Security Fabric > Logical Topology. The SD-WAN zones and their
members are shown.
FortiOS 6.4.2 Administration Guide 523
Fortinet Inc.
SD-WAN
To configure SD-WAN in the CLI:
1. Enable SD-WAN and create a zone:
config system sdwan
set status enable
config zone
edit "vpn-zone"
next
end
end
2. Configure SD-WAN members and add them to a zone:
config system sdwan
config members
edit 1
set interface "to_FG_B_root"
set zone "vpn-zone"
next
edit 2
set interface "GRE_1"
set zone "vpn-zone"
next
end
end
To create a policy using the SD-WAN zone in the CLI:
config firewall policy
edit <policy_id>
set name <policy_name>
set srcintf internal
set dstintf vpn-zone
FortiOS 6.4.2 Administration Guide 524
Fortinet Inc.
SD-WAN
set srcaddr all
set dstaddr all
set action accept
set schedule always
set service ALL
set utm-status enable
set ssl-ssh-profile <profile_name>
set av-profile <profile_name>
set webfilter-profile <profile_name>
set dnsfilter-profile <profile_name>
set emailfilter-profile <profile_name>
set ips_sensor <sensor_name>
set application-list <app_list>
set voip-profile <profile_name>
set logtraffic all
set nat enable
set status enable
next
end
Performance SLA
The following topics provide instructions on configuring performance SLA:
l Link health monitor on page 525
l Factory default health checks on page 528
l Health check options on page 530
l Link monitoring example on page 533
l SLA targets example on page 534
l Health check packet DSCP marker support on page 536
l Interface speedtest on page 536
l Monitor performance SLA on page 538
l SLA monitoring using the REST API on page 541
Link health monitor
Performance SLA link health monitoring measures the health of links that are connected to SD-WAN member interfaces
by sending probing signals through each link to a server and measuring the link quality based on latency, jitter, and
packet loss. If a link fails the health check, the routes on that link are removed from the SD-WAN link load balancing
group, and traffic is routed through other links. When the link is working again the routes are reestablished. This prevents
traffic being sent to a broken link and lost.
Two health check servers can be configured to ensure that, if there is a connectivity issue, the interface is at fault and not
the server. A server can only be used in one health check.
The FortiGate uses the first server configured in the health check server list to perform the health check. If the first server
is unavailable, then the second server is used. The second server continues to be used until it becomes unavailable, and
then the FortiGate returns to the first server, if it is available. If both servers are unavailable, then the health check fails.
FortiOS 6.4.2 Administration Guide 525
Fortinet Inc.
SD-WAN
You can configure the protocol that is used for status checks, including: Ping, HTTP, DNS, TCP echo, UDP echo, two-
way active measurement protocol (TWAMP), TCP connect, and FTP. In the GUI, only Ping, HTTP, and DNS are
available.
You can view link quality measurements at Network > Performance SLA. The table shows the default health checks, the
health checks that you configured, and information about each health check. The values shown in the Packet Loss,
Latency, and Jitter columns are for the health check server that the FortiGate is currently using. The green up arrows
indicate that the server is responding, and does not indicate if the health checks are being met. See Results on page 514
for more information.
To configure a link health monitor in the GUI:
1. Go to Network > Performance SLA and click Create New.
2. Set a Name for the SLA.
3. Set the Protocol that you need to use for status checks: Ping, HTTP, or DNS.
4. Set Server to the IP addresses of up to two servers that all of the SD-WAN members in the performance SLA can
reach.
5. Set Participants to All SD-WAN Members, or select Specify to choose specific SD-WAN members.
6. Set Enable probe packets to enable or disable sending probe packets.
7. Configure SLA Target:
If the health check is used in an SD-WAN rule that uses Manual or Best Quality strategies, enabling SLA Target is
optional. If the health check is used in an SD-WAN rule that uses Lowest Cost (SLA) or Maximum Bandwidth (SLA)
strategies, then SLA Target is enabled.
When SLA Target is enabled, configure the following:
l Latency threshold: Calculated based on last 30 probes (default = 5ms).
l Jitter threshold: Calculated based on last 30 probes (default = 5ms).
l Packet Loss threshold: Calculated based on last 100 probes (default = 0%).
8. In the Link Status section configure the following:
l Check interval: The interval in which the FortiGate checks the interface, in milliseconds (500 - 3600000, default
= 500).
l Failures before inactive: The number of failed status checks before the interface shows as inactive (1 - 3600,
default =5). This setting helps prevent flapping, where the system continuously transfers traffic back and forth
between links
l Restore link after: The number of successful status checks before the interface shows as active (1 - 3600,
default = 5). This setting helps prevent flapping, where the system continuously transfers traffic back and forth
between links
9. In the Actions when Inactive section, enable Update static route to disable static routes for inactive interfaces and
restore routes when interfaces recover.
FortiOS 6.4.2 Administration Guide 526
Fortinet Inc.
SD-WAN
10. Click OK.
To configure a link health monitor in the CLI:
config system sdwan
config health-check
edit "PingSLA"
set addr-mode {ipv4 | ipv6}
set server <server1_IP_address> <server2_IP_address>
set protocol {ping | tcp-echo | udp-echo | http | twamp | dns | tcp-connect |
ftp}
set probe-timeout <integer>
set probe-packets {enable | disable}
set interval <integer>
set failtime <integer>
set recoverytime <integer>
set update-static-route {enable | disable}
set members <member_number> ... <member_number>
config sla
edit 1
set link-cost-factor {latency jitter packet-loss}
set latency-threshold <integer>
set jitter-threshold <integer>
set packetloss-threshold <integer>
next
end
next
end
end
Additional settings are available for some of the protocols:
Protocol Additional options
http port <port_number>
http-get <url>
http-match <response_string>
FortiOS 6.4.2 Administration Guide 527
Fortinet Inc.
SD-WAN
Protocol Additional options
twamp port <port_number>
security mode {none | authentication}
password <password>
packet-size <size>
ftp ftp {passive | port}
ftp-file <path>
For more examples see Health check options on page 530.
Factory default health checks
There are six predefined performance SLA profiles for newly created VDOMs or factory reset FortiGate devices:
l AWS
l System DNS
l FortiGuard
l Gmail
l Google Search
l Office 365
You can view and configure the SLA profiles in Network > Performance SLA.
After configuring a health check, you will be able to view packet loss, latency, and jitter data for the SLA profiles. If a
value is colored red, it means that it failed to meet the SLA requirements.
FortiOS 6.4.2 Administration Guide 528
Fortinet Inc.
SD-WAN
To configure the performance SLA profiles in the CLI:
config health-check
edit "Default_AWS"
set server "aws.amazon.com"
set protocol http
set interval 1000
set probe-timeout 1000
set recoverytime 10
config sla
edit 1
set latency-threshold 250
set jitter-threshold 50
set packetloss-threshold 5
next
end
next
edit "Default_DNS"
set system-dns enable
set interval 1000
set probe-timeout 1000
set recoverytime 10
config sla
edit 1
set latency-threshold 250
set jitter-threshold 50
set packetloss-threshold 5
next
end
next
edit "Default_FortiGuard"
set server "fortiguard.com"
set protocol http
set interval 1000
set probe-timeout 1000
set recoverytime 10
config sla
edit 1
set latency-threshold 250
set jitter-threshold 50
set packetloss-threshold 5
FortiOS 6.4.2 Administration Guide 529
Fortinet Inc.
SD-WAN
next
end
next
edit "Default_Gmail"
set server "gmail.com"
set interval 1000
set probe-timeout 1000
set recoverytime 10
config sla
edit 1
set latency-threshold 250
set jitter-threshold 50
set packetloss-threshold 2
next
end
next
edit "Default_Google Search"
set server "www.google.com"
set protocol http
set interval 1000
set probe-timeout 1000
set recoverytime 10
config sla
edit 1
set latency-threshold 250
set jitter-threshold 50
set packetloss-threshold 5
next
end
next
edit "Default_Office_365"
set server "www.office.com"
set protocol http
set interval 1000
set probe-timeout 1000
set recoverytime 10
config sla
edit 1
set latency-threshold 250
set jitter-threshold 50
set packetloss-threshold 5
next
end
next
end
Health check options
Health checks include several protocols and protocol specific options.
The health check protocol options include:
ping Use PING to test the link with the server.
FortiOS 6.4.2 Administration Guide 530
Fortinet Inc.
SD-WAN
tcp-echo Use TCP echo to test the link with the server.
udp-echo Use UDP echo to test the link with the server.
http Use HTTP-GET to test the link with the server.
twamp Use TWAMP to test the link with the server.
dns Use DNS query to test the link with the server.
The FortiGate sends a DNS query for an A Record and the response matches the expected IP
address.
tcp-connect Use a full TCP connection to test the link with the server.
The method to measure the quality of the TCP connection can be:
l half-open: FortiGate sends SYN and gets SYN-ACK. The latency is based on the
round trip between SYN and SYN-ACK (default).
l half-close: FortiGate sends FIN and gets FIN-ACK. The latency is based on the
round trip between FIN and FIN-ACK.
ftp Use FTP to test the link with the server.
The FTP mode can be:
l passive: The FTP health-check initiates and establishes the data connection (default).
l port: The FTP server initiates and establishes the data connection.
To use UDP-echo and TCP-echo as health checks:
config system sdwan
set status enable
config health-check
edit "h4_udp1"
set protocol udp-echo
set port 7
set server <server>
next
edit "h4_tcp1"
set protocol tcp-echo
set port 7
set server <server>
next
edit "h6_udp1"
set addr-mode ipv6
set server "2032::12"
set protocol udp-echo
set port 7
next
end
end
To use DNS as a health check, and define the IP address that the response must match:
config system sdwan
set status enable
config health-check
edit "h4_dns1"
FortiOS 6.4.2 Administration Guide 531
Fortinet Inc.
SD-WAN
set protocol dns
set dns-request-domain "ip41.forti2.com"
set dns-match-ip 1.1.1.1
next
edit "h6_dns1"
set addr-mode ipv6
set server "2000::15.1.1.4"
set protocol dns
set port 53
set dns-request-domain "ip61.xxx.com"
next
end
end
To use TCP Open (SYN/SYN-ACK) and TCP Close (FIN/FIN-ACK) to verify connections:
config system sdwan
set status enable
config health-check
edit "h4_tcpconnect1"
set protocol tcp-connect
set port 443
set quality-measured-method {half-open | half-close}
set server <server>
next
edit "h6_tcpconnect1"
set addr-mode ipv6
set server "2032::13"
set protocol tcp-connect
set port 444
set quality-measured-method {half-open | half-close}
next
end
end
To use active or passive mode FTP to verify connections:
config system sdwan
set status enable
config health-check
edit "h4_ftp1"
set protocol ftp
set port 21
set user "root"
set password ***********
set ftp-mode {passive | port}
set ftp-file "1.txt"
set server <server>
next
edit "h6_ftp1"
set addr-mode ipv6
set server "2032::11"
set protocol ftp
set port 21
set user "root"
set password ***********
FortiOS 6.4.2 Administration Guide 532
Fortinet Inc.
SD-WAN
set ftp-mode {passive | port}
set ftp-file "2.txt"
next
end
end
Link monitoring example
Performance SLA link monitoring measures the health of links that are connected to SD-WAN member interfaces by
sending probing signals through each link to a server and measuring the link quality based on latency, jitter, and packet
loss. If a link is broken, the routes on that link are removed, and traffic is routed through other links. When the link is
working again, the routes are reenabbled. This prevents traffic being sent to a broken link and lost.
In this example:
l Interfaces wan1 and wan2 connect to the internet through separate ISPs
l The detection server IP address is 208.91.114.182
A performance SLA is created so that, if one link fails, its routes are removed and traffic is detoured to the other link.
To configure a Performance SLA using the GUI:
1. On the FortiGate, add wan1 and wan2 as SD-WAN members, then add a policy and static route. See SD-WAN
quick start on page 509 for details.
2. Go to Network > Performance SLA.
3. Click Create New. The Performance SLA page opens.
4. Enter a name for the SLA and select a protocol.
5. In the Server field, enter the detection server IP address (208.91.114.182 in this example).
FortiOS 6.4.2 Administration Guide 533
Fortinet Inc.
SD-WAN
6. In the Participants field, select both wan1 and wan2.
7. Configured the remaining settings as needed, then click OK.
To configure a Performance SLA using the CLI:
config system sdwan
config health-check
edit "server"
set server "208.91.114.182"
set update-static-route enable
set members 1 2
next
end
end
To diagnose the Performance SLA status:
FGT # diagnose sys sdwan health-check
Health Check(server):
Seq(1): state(alive), packet-loss(0.000%) latency(15.247), jitter(5.231) sla_map=0x0
Seq(2): state(alive), packet-loss(0.000%) latency(13.621), jitter(6.905) sla_map=0x0
SLA targets example
SLA targets are a set of constraints that are used in SD-WAN rules to control the paths that traffic take.
The available constraints are:
l Latency threshold: Latency for SLA to make decision, in milliseconds (0 - 10000000, default = 5).
l Jitter threshold: Jitter for SLA to make decision, in milliseconds (0 - 10000000, default = 5).
l Packet loss threshold: Packet loss for SLA to make decision, in percentage (0 - 100, default = 0).
FortiOS 6.4.2 Administration Guide 534
Fortinet Inc.
SD-WAN
To configure Performance SLA targets using the GUI:
1. On the FortiGate, add wan1 and wan2 as SD-WAN members, then add a policy and static route. See SD-WAN
quick start on page 509 for details.
2. Go to Network > Performance SLA.
3. Create a new Performance SLA or edit an existing one. See Link monitoring example on page 533.
4. Enable SLA Targetsand configure the constraints. To add multiple SLA targets, use the CLI.
5. Configured the remaining settings as needed, then click OK.
To configure Performance SLA targets using the GUI:
config system sdwan
config health-check
edit "server"
set server "208.91.114.182"
set members 1 2
config sla
edit 1
set link-cost-factor latency jitter packet-loss
set latency-threshold 10
set jitter-threshold 10
set packetloss-threshold 1
FortiOS 6.4.2 Administration Guide 535
Fortinet Inc.
SD-WAN
next
end
next
end
end
The link-cost-factor variable is used to select which constraints are enabled.
Health check packet DSCP marker support
SD-WAN health check probe packets support Differentiated Services Code Point (DSCP) markers for accurate
evaluation of the link performance for high priority applications by upstream devices.
When the SD-WAN health check packet is sent out, the DSCP can be set with a CLI command.
To mark health-check packets with DSCP:
config system sdwan
config health-check
edit <name>
set diffservcode <6 bits binary, range 000000-111111>
next
end
end
Interface speedtest
An interface speedtest can be performed on WAN interfaces in the GUI. The results of the test can be added to the
interface's Estimated bandwidth. An SD-WAN Network Monitor license is required.
The License widget and the System > FortiGuard page display the SD-WAN Network Monitor license status.
FortiOS 6.4.2 Administration Guide 536
Fortinet Inc.
SD-WAN
To run an interface speedtest in the GUI:
1. Go to Network > Interfaces.
2. Edit a WAN interface. The interfaces can be grouped by role using the grouping dropdown on the right side of the
toolbar.
3. Click Execute speed test in the right pane.
FortiOS 6.4.2 Administration Guide 537
Fortinet Inc.
SD-WAN
4. When the test completes, click Apply results to estimated bandwidth.
The speedtest results are used to populate the Estimated bandwidth fields.
5. Click OK.
The FortiGate must be connected to FortiGuard, and able to reach either the AWS or Google
speedtest servers.
Monitor performance SLA
SD-WAN diagnostics can be used to help maintain your SD-WAN solution
Monitoring SD-WAN link quality status
Link quality plays a significant role in link selection for SD-WAN. Investigate any prolonged issues with packet loss,
latency, or jitter to ensure that your network does not experience degraded performance or an outage.
You can monitor the link quality status of SD-WAN interface members at Network > Performance SLA.
The live charts show the packet loss, latency, or jitter for the selected health check. Hover the cursor over a line in the
chart to see the specific value for that interface at that specific time.
FortiOS 6.4.2 Administration Guide 538
Fortinet Inc.
SD-WAN
The table shows information about each health check, including the configured servers, link quality data, and thresholds.
The colored arrow indicates the status of the interface when the last status check was performed: green means that the
interface was active, and red means that the interface was inactive. Hover the cursor over the arrow for additional
information.
Monitoring system event logs
The features adds an SD-WAN daemon function to keep a short, 10 minute history of SLA that can be viewed in the CLI.
Performance SLA results related to interface selection, session failover, and other information, can be logged. These
logs can then be used for long-term monitoring of traffic issues at remote sites, and for reports and views in
FortiAnalyzer.
The time intervals that Performance SLA fail and pass logs are generated in can be configured.
To configure the fail and pass logs' generation time interval:
config system sdwan
config health-check
edit "PingSLA"
set sla-fail-log-period 30
set sla-pass-log-period 60
next
end
end
To view the 10 minute Performance SLA link status history:
FGDocs # diagnose sys sdwan sla-log PingSLA 1
Timestamp: Fri Sep 4 10:32:37 2020, vdom root, health-check PingSLA, interface: wan2,
status: up, latency: 4.455, jitter: 0.430, packet loss: 0.000%.
Timestamp: Fri Sep 4 10:32:37 2020, vdom root, health-check PingSLA, interface: wan2,
status: up, latency: 4.461, jitter: 0.436, packet loss: 0.000%.
Timestamp: Fri Sep 4 10:32:38 2020, vdom root, health-check PingSLA, interface: wan2,
status: up, latency: 4.488, jitter: 0.415, packet loss: 0.000%.
...
Timestamp: Fri Sep 4 10:42:36 2020, vdom root, health-check PingSLA, interface: wan2,
status: up, latency: 6.280, jitter: 0.302, packet loss: 0.000%.
Timestamp: Fri Sep 4 10:42:37 2020, vdom root, health-check PingSLA, interface: wan2,
status: up, latency: 6.261, jitter: 0.257, packet loss: 0.000%.
Timestamp: Fri Sep 4 10:42:37 2020, vdom root, health-check PingSLA, interface: wan2,
status: up, latency: 6.229, jitter: 0.245, packet loss: 0.000%.
SLA pass logs
The FortiGate generates Performance SLA logs at the specified pass log interval (sla-pass-log-period) when SLA
passes.
3: date=2019-02-28 time=11:53:26 logid="0100022925" type="event" subtype="system"
level="information" vd="root" eventtime=1551383604 logdesc="Link monitor SLA information"
name="ping" interface="R160" status="up" msg="Latency: 0.013, jitter: 0.001, packet loss:
0.000%, inbandwidth: 0Mbps, outbandwidth: 0Mbps, bibandwidth: 0Mbps, sla_map: 0x1"
7: date=2019-02-28 time=11:52:26 logid="0100022925" type="event" subtype="system"
level="information" vd="root" eventtime=1551383545 logdesc="Link monitor SLA information"
FortiOS 6.4.2 Administration Guide 539
Fortinet Inc.
SD-WAN
name="ping" interface="R160" status="up" msg="Latency: 0.013, jitter: 0.002, packet loss:
0.000%, inbandwidth: 0Mbps, outbandwidth: 0Mbps, bibandwidth: 0Mbps, sla_map: 0x1"
In the FortiAnalyzer GUI:
SLA fail logs
The FortiGate generates Performance SLA logs at the specified fail log interval (sla-fail-log-period) when SLA
fails.
6: date=2019-02-28 time=11:52:32 logid="0100022925" type="event" subtype="system"
level="notice" vd="root" eventtime=1551383552 logdesc="Link monitor SLA information"
name="ping" interface="R150" status="down" msg="Latency: 0.000, jitter: 0.000, packet loss:
100.000%, inbandwidth: 0Mbps, outbandwidth: 200Mbps, bibandwidth: 200Mbps, sla_map: 0x0"
8: date=2019-02-28 time=11:52:02 logid="0100022925" type="event" subtype="system"
level="notice" vd="root" eventtime=1551383522 logdesc="Link monitor SLA information"
name="ping" interface="R150" status="down" msg="Latency: 0.000, jitter: 0.000, packet loss:
100.000%, inbandwidth: 0Mbps, outbandwidth: 200Mbps, bibandwidth: 200Mbps, sla_map: 0x0"
In the FortiAnalyzer GUI:
FortiOS 6.4.2 Administration Guide 540
Fortinet Inc.
SD-WAN
SLA monitoring using the REST API
SLA log information and interface SLA information can be monitored using the REST API. This feature is also be used by
FortiManager as part of its detailed SLA monitoring and drill-down features.
Interface log command example:
https://172.172.172.9/api/v2/monitor/virtual-wan/interface-log
{
"http_method":"GET",
"results":[
{
"interface":"port13",
"logs":[
{
"timestamp":1547087168,
"tx_bandwidth":3447,
"rx_bandwidth":3457,
"bi_bandwidth":6904,
"tx_bytes":748875,
"rx_bytes":708799,
"egress_queue":[
]
},
{
"timestamp":1547087178,
"tx_bandwidth":3364,
"rx_bandwidth":3400,
"bi_bandwidth":6764,
"tx_bytes":753789,
"rx_bytes":712835,
"egress_queue":[
]
},
....
....
SLA log command example:
https://172.172.172.9/api/v2/monitor/virtual-wan/sla-log
{
"http_method":"GET",
"results":[
{
"name":"ping",
"interface":"port13",
"logs":[
{
"timestamp":1547087204,
"link":"up",
"latency":0.686433,
"jitter":0.063400,
"packetloss":0.000000
},
{
FortiOS 6.4.2 Administration Guide 541
Fortinet Inc.
SD-WAN
"timestamp":1547087205,
"link":"up",
"latency":0.688433,
"jitter":0.063133,
"packetloss":0.000000
},
{
"timestamp":1547087206,
"link":"up",
"latency":0.688300,
"jitter":0.065267,
"packetloss":0.000000
},
....
....
CLI diagnose commands:
# diagnose sys sdwan sla-log ping 1
Timestamp: Wed Jan 9 18:35:11 2019, vdom root, health-check ping, interface: port13,
status: up, latency: 0.698, jitter: 0.073, packet loss: 0.000%.
Timestamp: Wed Jan 9 18:35:12 2019, vdom root, health-check ping, interface: port13,
status: up, latency: 0.704, jitter: 0.073, packet loss: 0.000%.
Timestamp: Wed Jan 9 18:35:13 2019, vdom root, health-check ping, interface: port13,
status: up, latency: 0.709, jitter: 0.073, packet loss: 0.000%.
Timestamp: Wed Jan 9 18:35:14 2019, vdom root, health-check ping, interface: port13,
status: up, latency: 0.707, jitter: 0.066, packet loss: 0.000%.
Timestamp: Wed Jan 9 18:35:15 2019, vdom root, health-check ping, interface: port13,
status: up, latency: 0.710, jitter: 0.061, packet loss: 0.000%.
Timestamp: Wed Jan 9 18:35:16 2019, vdom root, health-check ping, interface: port13,
status: up, latency: 0.707, jitter: 0.055, packet loss: 0.000%.
Timestamp: Wed Jan 9 18:35:17 2019, vdom root, health-check ping, interface: port13,
status: up, latency: 0.703, jitter: 0.055, packet loss: 0.000%.
# diagnose sys sdwan intf-sla-log port13
Timestamp: Wed Jan 9 18:33:49 2019, used inbandwidth: 3208bps, used outbandwidth:
3453bps, used bibandwidth: 6661bps, tx bytes: 947234bytes, rx bytes: 898622bytes.
Timestamp: Wed Jan 9 18:33:59 2019, used inbandwidth: 3317bps, used outbandwidth:
3450bps, used bibandwidth: 6767bps, tx bytes: 951284bytes, rx bytes: 902937bytes.
Timestamp: Wed Jan 9 18:34:09 2019, used inbandwidth: 3302bps, used outbandwidth:
3389bps, used bibandwidth: 6691bps, tx bytes: 956268bytes, rx bytes: 907114bytes.
Timestamp: Wed Jan 9 18:34:19 2019, used inbandwidth: 3279bps, used outbandwidth:
3352bps, used bibandwidth: 6631bps, tx bytes: 958920bytes, rx bytes: 910793bytes.
Timestamp: Wed Jan 9 18:34:29 2019, used inbandwidth: 3233bps, used outbandwidth:
3371bps, used bibandwidth: 6604bps, tx bytes: 964374bytes, rx bytes: 914854bytes.
Timestamp: Wed Jan 9 18:34:39 2019, used inbandwidth: 3235bps, used outbandwidth:
3362bps, used bibandwidth: 6597bps, tx bytes: 968250bytes, rx bytes: 918846bytes.
Timestamp: Wed Jan 9 18:34:49 2019, used inbandwidth: 3165bps, used outbandwidth:
3362bps, used bibandwidth: 6527bps, tx bytes: 972298bytes, rx bytes: 922724bytes.
Timestamp: Wed Jan 9 18:34:59 2019, used inbandwidth: 3184bps, used outbandwidth:
3362bps, used bibandwidth: 6546bps, tx bytes: 977282bytes, rx bytes: 927019bytes.
FortiOS 6.4.2 Administration Guide 542
Fortinet Inc.
SD-WAN
SD-WAN rules
The following topics provide instructions on configuring SD-WAN rules:
l Implicit rule on page 543
l Best quality strategy on page 547
l Lowest cost (SLA) strategy on page 550
l Maximize bandwidth (SLA) strategy on page 553
l Minimum number of links for a rule to take effect on page 556
l Use MAC addresses in SD-WAN rules and policy routes on page 556
l SD-WAN traffic shaping and QoS on page 557
l SDN dynamic connector addresses in SD-WAN rules on page 562
l Application steering using SD-WAN rules on page 565
l DSCP tag-based traffic steering in SD-WAN on page 576
Implicit rule
SD-WAN rules define specific policy routing options to route traffic to an SD-WAN member. When no explicit SD-WAN
rules are defined, or if none of the rules are matched, then the default implicit rule is used.
In an SD-WAN configuration, the default route usually points to the SD-WAN interface, so each active member's
gateway is added to the routing table's default route. FortiOS uses equal-cost multipath (ECMP) to balance traffic
between the interfaces. One of five load balancing algorithms can be selected:
Source IP (source-ip-based) Traffic is divided equally between the interfaces, including the SD-WAN interface.
Sessions that start at the same source IP address use the same path.
This is the default selection.
Sessions (weight-based) The workload is distributing based on the number of sessions that are connected
through the interface.
The weight that you assign to each interface is used to calculate the percentage of
the total sessions that are allowed to connect through an interface, and the
sessions are distributed to the interfaces accordingly.
Sessions with the same source and destination IP addresses (src-ip and dst-
ip) are forwarded to the same path, but are still considered in later session ratio
calculations.
An interface's weight value cannot be zero.
Spillover (usage-based) The interface is used until the traffic bandwidth exceeds the ingress and egress
thresholds that you set for that interface. Additional traffic is then sent through the
next SD-WAN interface member.
Source-Destination IP (source- Traffic is divided equally between the interfaces. Sessions that start at the same
dest-ip-based) source IP address and go to the same destination IP address use the same path.
Volume (measured-volume- The workload is distributing based on the number of packets that are going
based) through the interface.
FortiOS 6.4.2 Administration Guide 543
Fortinet Inc.
SD-WAN
The volume weight that you assign to each interface is used to calculate the
percentage of the total bandwidth that is allowed to go through an interface, and
the bandwidth is distributed to the interfaces accordingly.
An interface's volume value cannot be zero.
You cannot exclude an interface from participating in load balancing using the implicit rule. If
the weight or volume were set to zero in a previous FortiOS version, the value is treated as a
one.
Interfaces with static routes can be excluded from ECMP if they are configured with a lower
priority than other static routes.
Examples
The following four examples demonstrate how to use the implicit rules (load-balance mode).
If no SD-WAN zone is specified, members are added to the default virtual-wan-link zone.
Example 1
Outgoing traffic is equally balanced between wan1 and wan2, using source-ip-based or source-dest-ip-based mode.
Using the GUI:
1. On the FortiGate, enable SD-WAN and add wan1 and wan2 as SD-WAN members, then add a policy and static
route. See SD-WAN quick start on page 509 for details.
2. Go to Network > SD-WAN Rules.
3. Edit the sd-wan rule (the last default rule).
FortiOS 6.4.2 Administration Guide 544
Fortinet Inc.
SD-WAN
4. For the Load Balancing Algorithm, select either Source IP or Source-Destination IP.
5. Click OK.
Using the CLI:
1. Enable SD-WAN and add wan1 and wan2 as SD-WAN members, then add a policy and static route. See SD-WAN
quick start on page 509 for details.
2. Set the load balancing algorithm:
Source IP based:
config system sdwan
set load-balance-mode source-ip-based
end
Source-Destination IP based:
config system sdwan
set load-balance-mode source-dest-ip-based
end
Example 2
Outgoing traffic is balanced between wan1 and wan2 with a customized ratio, using weight-based mode: wan1 runs 80%
of the sessions, and wan2 runs 20% of the sessions.
Sessions with the same source and destination IP addresses (src-ip and dst-ip) will be forwarded to the same
path, but will still be considered in later session ratio calculations.
Using the GUI:
1. Go to Network > SD-WAN Rules.
2. Edit the sd-wan rule (the last default rule).
3. For the Load Balancing Algorithm, select Sessions.
4. Enter 80 in the wan1 field, and 20 in the wan2 field.
FortiOS 6.4.2 Administration Guide 545
Fortinet Inc.
SD-WAN
5. Click OK.
Using the CLI:
config system sdwan
set load-balance-mode weight-based
config members
edit 1
set interface "wan1"
set weight 80
next
edit 2
set interface "wan2"
set weight 20
next
end
end
Example 3
Outgoing traffic is balanced between wan1 and wan2 with a customized ratio, using measured-volume-based mode:
wan1 runs 80% of the volume, and wan2 runs 20% of the volume.
Using the GUI:
1. Go to Network > SD-WAN Rules.
2. Edit the sd-wan rule (the last default rule).
3. For the Load Balancing Algorithm, select Volume.
4. Enter 80 in the wan1 field, and 20 in the wan2 field.
5. Click OK.
Using the CLI:
config system sdwan
set load-balance-mode measured-volume-based
config members
edit 1
set interface "wan1"
set volume-ratio 80
next
edit 2
set interface "wan2"
set volume-ratio 20
next
end
end
Example 4
Load balancing can be used to reduce costs when internet connections are charged at different rates. For example, if
wan2 charges based on volume usage and wan1 charges a fixed monthly fee, we can use wan1 at its maximum
bandwidth, and use wan2 for overflow.
FortiOS 6.4.2 Administration Guide 546
Fortinet Inc.
SD-WAN
In this example, wan1's bandwidth is 10Mbps down and 2Mbps up. Traffic will use wan1 until it reaches its spillover limit,
then it will start to use wan2. Note that auto-asic-offload must be disabled in the firewall policy.
Using the GUI:
1. On the FortiGate, enable SD-WAN and add wan1 and wan2 as SD-WAN members, then add a policy and static
route. See SD-WAN quick start on page 509 for details.
2. Go to Network > SD-WAN Rules.
3. Edit the sd-wan rule (the last default rule).
4. For the Load Balancing Algorithm, select Spillover.
5. Enter 10000 in the wan1 Ingress Spillover Threshold field, and 2000 in the wan1 Egress Spillover Threshold field.
6. Click OK.
Using the CLI:
config system sdwan
set load-balance-mode usage-based
config members
edit 1
set interface "wan1"
set spillover-threshold 2000
set ingress-spillover-threshold 10000
next
end
end
Best quality strategy
SD-WAN rules are used to control how sessions are distributed to SD-WAN members. Rules can be configured in one of
five modes:
l auto: Interfaces are assigned a priority based on quality.
l Manual (manual): Interfaces are manually assigned a priority.
l Best Quality (priority): Interface are assigned a priority based on the link-cost-factor of the interface.
l Lowest Cost (SLA) (sla): Interfaces are assigned a priority based on selected SLA settings. See Lowest cost (SLA)
strategy on page 550.
l Maximize Bandwith (SLA) (load-balance): Traffic is distributed among all available links based on the selected
load balancing algorithm. See Maximize bandwidth (SLA) strategy on page 553.
FortiOS 6.4.2 Administration Guide 547
Fortinet Inc.
SD-WAN
When using Best Quality mode, SD-WAN will choose the best link to forward traffic by comparing the link-cost-factor,
selected from one of the following:
GUI CLI Description
Latency latency Select a link based on latency.
Jitter jitter Select a link based on jitter.
Packet Loss packet-loss Select a link based on packet loss.
Downstream inbandwidth Select a link based on available bandwidth of incoming traffic.
Upstream outbandwidth Select a link based on available bandwidth of outgoing traffic.
Bandwidth bibandwidth Select a link based on available bandwidth of bidirectional traffic.
custom-profile-1 custom-profile-1 Select link based on customized profile. If selected, set the
following weights:
l packet-loss-weight: Coefficient of packet-loss.
l latency-weight: Coefficient of latency.
l jitter-weight: Coefficient of jitter.
l bandwidth-weight: Coefficient of reciprocal of available
bidirectional bandwidth.
In this example, your wan1 and wan2 SD-WAN interfaces connect to two ISPs that both go to the public internet, and you
want Gmail services to use the link with the least latency.
To configure an SD-WAN rule to use Best Quality:
1. On the FortiGate, add wan1 and wan2 as SD-WAN members, then add a policy and static route. See SD-WAN
quick start on page 509 for details.
2. Create a new Performance SLA named google. See Link monitoring example on page 533.
3. Go to Network > SD-WAN Rules.
4. Click Create New. The Priority Rule page opens.
5. Enter a name for the rule, such as gmail.
FortiOS 6.4.2 Administration Guide 548
Fortinet Inc.
SD-WAN
6. Configure the following settings:
Field Setting
Internet Service Google-Gmail
Strategy Best Quality
Interface preference wan1 and wan2
Measured SLA google (created in step 2).
Quality criteria Latency
7. Click OK to create the rule.
To configure an SD-WAN rule to use priority:
config system sdwan
config health-check
edit "google"
set server "google.com"
set members 1 2
next
end
config service
edit 1
set name "gmail"
set mode priority
set internet-service enable
set internet-service-id 65646
set health-check "google"
set link-cost-factor latency
set priority-members 1 2
next
end
end
FortiOS 6.4.2 Administration Guide 549
Fortinet Inc.
SD-WAN
To diagnose the Performance SLA status:
FGT # diagnose sys sdwan health-check google
Health Check(google):
Seq(1): state(alive), packet-loss(0.000%) latency(14.563), jitter(4.334) sla_map=0x0
Seq(2): state(alive), packet-loss(0.000%) latency(12.633), jitter(6.265) sla_map=0x0
FGT # diagnose sys sdwan service 1
Service(1):
TOS(0x0/0x0), protocol(0: 1->65535), Mode(priority), link-cost-facotr(latency), link-
cost-threshold(10), health-check(google) Members:
1: Seq_num(2), alive, latency: 12.633, selected
2: Seq_num(1), alive, latency: 14.563, selected
Internet Service: Google-Gmail(65646)
As wan2 has a smaller latency, SD-WAN will put Seq_num(2) on top of Seq_num(1) and wan2 will be used to forward
Gmail traffic.
Lowest cost (SLA) strategy
SD-WAN rules are used to control how sessions are distributed to SD-WAN members. Rules can be configured in one of
five modes:
l auto: Interfaces are assigned a priority based on quality.
l Manual (manual): Interfaces are manually assigned a priority.
l Best Quality (priority): Interface are assigned a priority based on the link-cost-factor of the interface. See Best
quality strategy on page 547.
l Lowest Cost (SLA) (sla): Interfaces are assigned a priority based on selected SLA settings.
l Maximize Bandwidth (SLA) (load-balance): Traffic is distributed among all available links based on the selected
load balancing algorithm. See Maximize bandwidth (SLA) strategy on page 553.
When using Lowest Cost (SLA) mode (sla in the CLI), SD-WAN will choose the lowest cost link that satisfies SLA to
forward traffic. The lowest possible cost is 0. If multiple eligible links have the same cost, the Interface preference order
will be used to select a link.
FortiOS 6.4.2 Administration Guide 550
Fortinet Inc.
SD-WAN
In this example, your wan1 and wan2 SD-WAN interfaces connect to two ISPs that both go to the public internet. The
cost of wan2 is less than that of wan1. You want to configure Gmail services to use the lowest cost interface, but the link
quality must meet a standard of latency: 10ms, and jitter: 5ms.
To configure an SD-WAN rule to use Lowest Cost (SLA):
1. On the FortiGate, add wan1 and wan2 as SD-WAN members, then add a policy and static route. See SD-WAN
quick start on page 509 for details.
2. Create a new Performance SLA named google that includes an SLA Target with Latency threshold = 10ms and
Jitter threshold = 5ms. See Link monitoring example on page 533.
3. Go to Network > SD-WAN Rules.
4. Click Create New. The Priority Rule page opens.
5. Enter a name for the rule, such as gmail.
6. Configure the following settings:
Field Setting
Internet Service Google-Gmail
Strategy Lowest Cost (SLA)
Interface preference wan1 and wan2
Required SLA target google (created in step 2).
7. Click OK to create the rule.
To configure an SD-WAN rule to use SLA:
config system sdwan
config members
edit 1
set interface "wan1"
set cost 10
next
edit 2
FortiOS 6.4.2 Administration Guide 551
Fortinet Inc.
SD-WAN
set interface "wan2"
set cost 5
next
end
config health-check
edit "google"
set server "google.com"
set members 1 2
config sla
edit 1
set latency-threshold 10
set jitter-threshold 5
next
end
next
end
config service
edit 1
set name "gmail"
set mode sla
set internet-service enable
set internet-service-id 65646
config sla
edit "google"
set id 1
next
end
set priority-members 1 2
next
end
end
If no SD-WAN zone is specified, members are added to the default virtual-wan-link zone.
To diagnose the Performance SLA status:
FGT # diagnose sys sdwan health-check google
Health Check(google):
Seq(1): state(alive), packet-loss(0.000%) latency(14.563), jitter(4.334) sla_map=0x0
Seq(2): state(alive), packet-loss(0.000%) latency(12.633), jitter(6.265) sla_map=0x0
FGT # diagnose sys sdwan service 1
Service(1): Address Mode(IPV4) flags=0x0
TOS(0x0/0x0), Protocol(0: 1->65535), Mode(sla)
Members:<<BR>>
1: Seq_num(2), alive, sla(0x1), cfg_order(1), selected
2: Seq_num(1), alive, sla(0x1), cfg_order(0), selected
Internet Service: Google.Gmail(65646)
FortiOS 6.4.2 Administration Guide 552
Fortinet Inc.
SD-WAN
When both wan1 and wan2 meet the SLA requirements, Gmail traffic will only use wan2. If only wan1 meets the SLA
requirements, Gmail traffic will only use wan1, even though it has a higher cost. If neither interface meets the
requirements, wan2 will be used.
If both interface had the same cost and both met the SLA requirements, the first link configured in set priority-
members would be used.
Maximize bandwidth (SLA) strategy
SD-WAN rules are used to control how sessions are distributed to SD-WAN members. Rules can be configured in one of
five modes:
l auto: Interfaces are assigned a priority based on quality.
l Manual (manual): Interfaces are manually assigned a priority.
l Best Quality (priority): Interface are assigned a priority based on the link-cost-factor of the interface. See Best
quality strategy on page 547.
l Lowest Cost (SLA) (sla): Interfaces are assigned a priority based on selected SLA settings. See Lowest cost (SLA)
strategy on page 550.
l Maximize Bandwidth (SLA) (load-balance): Traffic is distributed among all available links based on the selected
load balancing algorithm.
When using Maximize Bandwidth mode (load-balance in the CLI), SD-WAN will choose all of the links that satisfies
SLA to forward traffic based on a load balancing algorithm. The load balancing algorithm, or hash method, can be one of
the following:
round-robin All traffic are distributed to selected interfaces in equal portions and circular order.
This is the default method, and the only option available when using the GUI.
source-ip-based All traffic from a source IP is sent to the same interface.
source-dest-ip- All traffic from a source IP to a destination IP is sent to the same interface.
based
inbandwidth All traffic are distributed to a selected interface with most available bandwidth for incoming traffic.
outbandwidth All traffic are distributed to a selected interface with most available bandwidth for outgoing traffic.
bibandwidth All traffic are distributed to a selected interface with most available bandwidth for both incoming
and outgoing traffic.
ADVPN is not supported in this mode.
FortiOS 6.4.2 Administration Guide 553
Fortinet Inc.
SD-WAN
In this example, your wan1 and wan2 SD-WAN interfaces connect to two ISPs that both go to the public internet. You
want to configure Gmail services to use both of the interface, but the link quality must meet a standard of latency: 10ms,
and jitter: 5ms. This can maximize the bandwidth usage.
To configure an SD-WAN rule to use Maximize Bandwidth (SLA):
1. On the FortiGate, add wan1 and wan2 as SD-WAN members, then add a policy and static route. See SD-WAN
quick start on page 509 for details.
2. Create a new Performance SLA named google that includes an SLA Target 1 with Latency threshold = 10ms and
Jitter threshold = 5ms. See Link monitoring example on page 533.
3. Go to Network > SD-WAN Rules.
4. Click Create New. The Priority Rule page opens.
5. Enter a name for the rule, such as gmail.
6. Configure the following settings:
Field Setting
Internet Service Google-Gmail
FortiOS 6.4.2 Administration Guide 554
Fortinet Inc.
SD-WAN
Field Setting
Strategy Maximize Bandwidth (SLA)
Interface preference wan1 and wan2
Required SLA target google (created in step 2).
7. Click OK to create the rule.
To configure an SD-WAN rule to use SLA:
config system sdwan
config health-check
edit "google"
set server "google.com"
set members 1 2
config sla
edit 1
set latency-threshold 10
set jitter-threshold 5
next
end
next
end
config service
edit 1
set name "gmail"
set addr-mode ipv4
set mode load-balance
set hash-mode round-robin
set internet-service enable
set internet-service-name Google-Gmail
config sla
edit "google"
set id 1
next
end
set priority-members 1 2
next
end
end
To diagnose the performance SLA status:
FGT # diagnose sys sdwan health-check google
Health Check(google):
Seq(1): state(alive), packet-loss(0.000%) latency(14.563), jitter(4.334) sla_map=0x0
Seq(2): state(alive), packet-loss(0.000%) latency(12.633), jitter(6.265) sla_map=0x0
FGT # diagnose sys sdwan service 1
Service(1): Address Mode(IPV4) flags=0x0
TOS(0x0/0x0), Protocol(0: 1->65535), Mode(load-balance)
Members:<<BR>>
FortiOS 6.4.2 Administration Guide 555
Fortinet Inc.
SD-WAN
1: Seq_num(1), alive, sla(0x1), num of pass(1), selected
2: Seq_num(2), alive, sla(0x1), num of pass(1), selected
Internet Service: Google.Gmail(65646)
When both wan1 and wan2 meet the SLA requirements, Gmail traffic will use both wan1 and wan2. If only one of the
interfaces meets the SLA requirements, Gmail traffic will only use that interface.
If neither interface meets the requirements but health-check is still alive, then wan1 and wan2 tie. The traffic will try to
balance between wan1 and wan2, using both interfaces to forward traffic.
Minimum number of links for a rule to take effect
In sla and load-balance modes, you can specify the number of links that must be up for the rule to take effect.
Example
In this example, ports 1 to 4 each have 10Mbps of bandwidth, and port 5 has 50Mbps. An application requires 35Mbps of
bandwidth, so the SD-WAN rule balances the traffic between ports 1 to 4. If one of the links goes down, all of the traffic
must be passed to port 5, so the minimum required number of links is 4.
To set the minimum number of links in a rule:
config system sdwan
config service
edit 1
set mode load-balance
set minimum-sla-meet-members 4
set dst <destination>
config sla
edit <sla>
set id <id>
next
end
set priority-members 1 2 3 4
next
end
end
Use MAC addresses in SD-WAN rules and policy routes
You can use MAC addresses as the source in SD-WAN rules and policy routes.
The FABRIC_DEVICE address object (a dynamic object that includes the IPs of Security Fabric devices) can be used as
a source or destination in SD-WAN rules and policy routes.
The diagnose ip proute match command accepts either the IP or MAC address format for the source:
diagnose ip proute match <destination> <source> <interface> <protocol> <port>
FortiOS 6.4.2 Administration Guide 556
Fortinet Inc.
SD-WAN
To configure a MAC address as a source for SD-WAN and a policy route:
1. Configure the MAC address:
config firewall address
edit "mac-add"
set type mac
set start-mac 70:4c:a5:86:de:56
set end-mac 70:4c:a5:86:de:56
next
end
2. Configure the policy route:
config router policy
edit 3
set srcaddr "mac-add"
set gateway 15.1.1.34
set output-device ha
next
end
3. Configure the SD-WAN rule:
config system sdwan
config service
edit 1
set dst "all"
set src "mac-add"
set priority-members 1
next
edit 2
set dst "FABRIC_DEVICE"
set priority-members 2
next
end
end
To verify the policy route matching for a MAC address:
# diagnose ip proute match 3.1.1.34 70:4c:a5:86:de:56 port3 22 6
dst=3.1.1.34 src=0.0.0.0 smac=70:4c:a5:86:de:56 iif=11 protocol=22 dport=6
id=00000003 type=Policy Route
seq-num=3
SD-WAN traffic shaping and QoS
Use a traffic shaper in a firewall shaping policy to control traffic flow. You can use it to control maximum and guaranteed
bandwidth, or put certain traffic to one of the three different traffic priorities: high, medium, or low.
An advanced shaping policy can classify traffic into 30 groups. Use a shaping profile to define the percentage of the
interface bandwidth that is allocated to each group. Each group of traffic is shaped to the assigned speed limit based on
the outgoing bandwidth limit configured on the interface.
For more information, see Traffic shaping on page 951.
FortiOS 6.4.2 Administration Guide 557
Fortinet Inc.
SD-WAN
Sample topology
Sample configuration
This example shows a typical customer usage where the customer's SD-WAN uses the default zone, and has two
member: wan1 and wan2, each set to 10Mb/s.
An overview of the procedures to configure SD-WAN traffic shaping and QoS with SD-WAN includes:
1. Give HTTP/HTTPS traffic high priority and give FTP low priority so that if there are conflicts, FortiGate will forward
HTTP/HTTPS traffic first.
2. Even though FTP has low priority, configure FortiGate to give it a 1Mb/s guaranteed bandwidth on each SD-WAN
member so that if there is no FTP traffic, other traffic can use all the bandwidth. If there is heavy FTP traffic, it can
still be guaranteed a 1Mb/s bandwidth.
3. Traffic going to specific destinations such as a VOIP server uses wan1 to forward, and SD-WAN forwards with an
Expedited Forwarding (EF) DSCP tag 101110.
To configure SD-WAN traffic shaping and QoS with SD-WAN in the GUI:
1. On the FortiGate, add wan1 and wan2 as SD-WAN members, then add a policy and static route.
See SD-WAN quick start on page 509.
2. Add a firewall policy with Application Control enabled. See Configuring firewall policies for SD-WAN on page 512.
3. Go to Policy & Objects > Traffic Shapers and edit low-priority.
a. Enable Guaranteed Bandwidth and set it to 1000 kbps.
4. Go to Policy & Objects > Traffic Shaping Policy and click Create New.
a. Name the traffic shaping policy, for example, HTTP-HTTPS.
b. Set the following:
Source all
Destination all
Service HTTP and HTTPS
Outgoing virtual-wan-link
Shared Shaper Enable and set to high-priority
Reverse Shaper Enable and set to high-priority
FortiOS 6.4.2 Administration Guide 558
Fortinet Inc.
SD-WAN
c. Click OK.
5. Go to Policy & Objects > Traffic Shaping Policy and click Create New.
a. Name the traffic shaping policy, for example, FTP.
b. Set the following:
Source all
Destination all
Service FTP, FTP_GET, and FTP_PUT
Outgoing virtual-wan-link
Shared Shaper Enable and set to low-priority
Reverse Shaper Enable and set to low-priority
c. Click OK
6. Go to Network > SD-WAN Rules and click Create New.
a. Enter a name for the rule, such as Internet.
b. In the Destination section, click Address and select the VoIP server that you created in the firewall address.
c. Under Outgoing Interfaces select Manual.
d. For Interface preference select wan1.
e. Click OK.
7. Use CLI commands to modify DSCP settings. See the DSCP CLI commands below.
To configure the firewall policy using the CLI:
connfig firewall policy
edit 1
set name "1"
set srcintf "dmz"
set dstintf "virtual-wan-link"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set utm-status enable
set ssl-ssh-profile "certificate-inspection"
set application-list "default"
set nat enable
next
end
To configure the firewall traffic shaper priority using the CLI:
config firewall shaper traffic-shaper
edit "high-priority"
set maximum-bandwidth 1048576
set per-policy enable
next
edit "low-priority"
set guaranteed-bandwidth 1000
set maximum-bandwidth 1048576
FortiOS 6.4.2 Administration Guide 559
Fortinet Inc.
SD-WAN
set priority low
set per-policy enable
next
end
To configure the firewall traffic shaping policy using the CLI:
config firewall shaping-policy
edit 1
set name "http-https"
set service "HTTP" "HTTPS"
set dstintf "virtual-wan-link"
set traffic-shaper "high-priority"
set traffic-shaper-reverse "high-priority"
set srcaddr "all"
set dstaddr "all"
next
edit 2
set name "FTP"
set service "FTP" "FTP_GET" "FTP_PUT"
set dstintf "virtual-wan-link"
set traffic-shaper "low-priority"
set traffic-shaper-reverse "low-priority"
set srcaddr "all"
set dstaddr "all"
next
end
To configure SD-WAN traffic shaping and QoS with SD-WAN in the CLI:
config system sdwan
set status enable
config members
edit 1
set interface "wan1"
set gateway 172.16.20.2
next
edit 2
set interface "wan2"
set gateway 10.100.20.2
next
end
config service
edit 1
set name "SIP"
set priority-members 1
set dst "voip-server"
set dscp-forward enable
set dscp-forward-tag 101110
next
end
end
If no SD-WAN zone is specified, members are added to the default virtual-wan-link zone.
FortiOS 6.4.2 Administration Guide 560
Fortinet Inc.
SD-WAN
To use the diagnose command to check if specific traffic is attached to the correct traffic shaper:
# diagnose firewall iprope list 100015
policy index=1 uuid_idx=0 action=accept
flag (0):
shapers: orig=high-priority(2/0/134217728) reply=high-priority(2/0/134217728)
cos_fwd=0 cos_rev=0
group=00100015 av=00000000 au=00000000 split=00000000
host=0 chk_client_info=0x0 app_list=0 ips_view=0
misc=0 dd_type=0 dd_mode=0
zone(1): 0 -> zone(2): 36 38
source(1): 0.0.0.0-255.255.255.255, uuid_idx=6,
dest(1): 0.0.0.0-255.255.255.255, uuid_idx=6,
service(2):
[6:0x0:0/(1,65535)->(80,80)] helper:auto
[6:0x0:0/(1,65535)->(443,443)] helper:auto
policy index=2 uuid_idx=0 action=accept
flag (0):
shapers: orig=low-priority(4/128000/134217728) reply=low-priority(4/128000/134217728)
cos_fwd=0 cos_rev=0
group=00100015 av=00000000 au=00000000 split=00000000
host=0 chk_client_info=0x0 app_list=0 ips_view=0
misc=0 dd_type=0 dd_mode=0
zone(1): 0 -> zone(2): 36 38
source(1): 0.0.0.0-255.255.255.255, uuid_idx=6,
dest(1): 0.0.0.0-255.255.255.255, uuid_idx=6,
service(3):
[6:0x0:0/(1,65535)->(21,21)] helper:auto
[6:0x0:0/(1,65535)->(21,21)] helper:auto
[6:0x0:0/(1,65535)->(21,21)] helper:auto
To use the diagnose command to check if the correct traffic shaper is applied to the session:
# diagnose sys session list
session info: proto=6 proto_state=01 duration=11 expire=3599 timeout=3600 flags=00000000
sockflag=00000000 sockport=0 av_idx=0 use=5
origin-shaper=low-priority prio=4 guarantee 128000Bps max 1280000Bps traffic 1050Bps drops
0B
reply-shaper=
per_ip_shaper=
class_id=0 shaping_policy_id=2 ha_id=0 policy_dir=0 tunnel=/ helper=ftp vlan_cos=0/255
state=may_dirty npu npd os mif route_preserve
statistic(bytes/packets/allow_err): org=868/15/1 reply=752/10/1 tuples=2
tx speed(Bps/kbps): 76/0 rx speed(Bps/kbps): 66/0
orgin->sink: org pre->post, reply pre->post dev=39->38/38->39 gwy=172.16.200.55/0.0.0.0
hook=post dir=org act=snat 10.1.100.11:58241->172.16.200.55:21(172.16.200.1:58241)
hook=pre dir=reply act=dnat 172.16.200.55:21->172.16.200.1:58241(10.1.100.11:58241)
pos/(before,after) 0/(0,0), 0/(0,0)
misc=0 policy_id=1 auth_info=0 chk_client_info=0 vd=4
serial=0003255f tos=ff/ff app_list=0 app=0 url_cat=0
sdwan_mbr_seq=0 sdwan_service_id=0
rpdb_link_id = 00000000
dd_type=0 dd_mode=0
npu_state=0x100000
FortiOS 6.4.2 Administration Guide 561
Fortinet Inc.
SD-WAN
npu info: flag=0x00/0x00, offload=0/0, ips_offload=0/0, epid=0/0, ipid=0/0,
vlan=0x0000/0x0000
vlifid=0/0, vtag_in=0x0000/0x0000 in_npu=0/0, out_npu=0/0, fwd_en=0/0, qid=0/0
no_ofld_reason: offload-denied helper
total session 1
To use the diagnose command to check the status of a shared traffic shaper:
# diagnose firewall shaper traffic-shaper list
name high-priority
maximum-bandwidth 131072 KB/sec
guaranteed-bandwidth 0 KB/sec
current-bandwidth 0 B/sec
priority 2
tos ff
packets dropped 0
bytes dropped 0
name low-priority
maximum-bandwidth 131072 KB/sec
guaranteed-bandwidth 125 KB/sec
current-bandwidth 0 B/sec
priority 4
tos ff
packets dropped 0
bytes dropped 0
name high-priority
maximum-bandwidth 131072 KB/sec
guaranteed-bandwidth 0 KB/sec
current-bandwidth 0 B/sec
priority 2
policy 1
tos ff
packets dropped 0
bytes dropped 0
name low-priority
maximum-bandwidth 131072 KB/sec
guaranteed-bandwidth 125 KB/sec
current-bandwidth 0 B/sec
priority 4
policy 2
tos ff
packets dropped 0
bytes dropped 0
SDN dynamic connector addresses in SD-WAN rules
SDN dynamic connector addresses can be used in SD-WAN rules. FortiGate supports both public (AWS, Azure, GCP,
OCI, AliCloud) and private (Kubernetes, VMware ESXi and NSX, OpenStack, ACI, Nuage) SDN connectors.
The configuration procedure for all of the supported SDN connector types is the same. This example uses an Azure
public SDN connector.
FortiOS 6.4.2 Administration Guide 562
Fortinet Inc.
SD-WAN
There are four steps to create and use an SDN connector address in an SD-WAN rule:
1. Configure the FortiGate IP address and network gateway so that it can reach the Internet.
2. Create an Azure SDN connector.
3. Create a firewall address to associate with the configured SDN connector.
4. Use the firewall address in an SD-WAN service rule.
To create an Azure SDN connector:
1. Go to Security Fabric > External Connectors.
2. Click Create New.
3. In the Public SDN section, click Microsoft Azure.
4. Enter the following:
Name azure1
Status Enabled
Update Interval Use Default
Server region Global
Directory ID 942b80cd-1b14-42a1-8dcf-4b21dece61ba
Application ID 14dbd5c5-307e-4ea4-8133-68738141feb1
Client secret xxxxxx
Resource path disabled
5. Click OK.
To create a firewall address to associate with the configured SDN connector:
1. Go to Policy & Objects > Addresses.
2. Click Create New > Address.
3. Enter the following:
Category Address
Name azure-address
Type Dynamic
Sub Type Fabric Connector Address
SDN Connector azure1
SDN address type Private
Filter SecurityGroup=edsouza-centos
FortiOS 6.4.2 Administration Guide 563
Fortinet Inc.
SD-WAN
Interface Any
4. Click OK.
To use the firewall address in an SD-WAN service rule:
1. Go to Network > SD-WAN Rules.
2. Click Create New.
3. Set the Name to Azure1.
4. For the Destination Address select azure-address.
5. Configure the remaining settings as needed. See SD-WAN rules on page 543 for details.
6. Click OK.
Diagnostics
Use the following CLI commands to check the status of and troubleshoot the connector.
To see the status of the SDN connector:
# diagnose sys sdn status
SDN Connector Type Status Updating Last update
----------------------------------------------------------------------------------------
-
azure1 azure connected no n/a
To debug the SDN connector to resolve the firewall address:
# diagnose debug application azd -1
Debug messages will be on for 30 minutes.
...
azd sdn connector azure1 start updating IP addresses
azd checking firewall address object azure-address-1, vd 0
IP address change, new list:
10.18.0.4
10.18.0.12
...
...
FortiOS 6.4.2 Administration Guide 564
Fortinet Inc.
SD-WAN
# diagnose sys sdwan service
Service(2): Address Mode(IPV4) flags=0x0
TOS(0x0/0x0), Protocol(0: 1->65535), Mode(manual)
Service role: standalone
Member sub interface:
Members:
1: Seq_num(1), alive, selected
Dst address:
10.18.0.4 - 10.18.0.4
10.18.0.12 - 10.18.0.12
... ...
... ...
... ...
Application steering using SD-WAN rules
This topic covers how to use application steering in a topology with multiple WAN links. The following examples illustrate
how to use different strategies to perform application steering to accommodate different business needs:
l Static application steering with a manual strategy on page 565
l Dynamic application steering with lowest cost and best quality strategies on page 568
Static application steering with a manual strategy
This example covers a typical usage scenario where the SD-WAN has two members: MPLS and DIA. DIA is primarily
used for direct internet access to internet applications, such as Office365, Google applications, Amazon, and Dropbox.
MPLS is primarily used for SIP, and works as a backup when DIA is not working.
This example configures all SIP traffic to use MPLS while all other traffic uses DIA. If DIA is not working, the traffic will
use MPLS.
To configure an SD-WAN rule to use SIP and DIA in the GUI:
1. Add port1 (DIA) and port2 (MPLS) as SD-WAN members, and configure a static route. See Configuring the SD-
WAN interface on page 510 for details.
FortiOS 6.4.2 Administration Guide 565
Fortinet Inc.
SD-WAN
2. Create a firewall policy with an Application Control profile configured. See Configuring firewall policies for SD-WAN
on page 512 for details.
3. Go to Network > SD-WAN Rules.
4. Click Create New. The Priority Rule page opens.
5. Enter a name for the rule, such as SIP.
6. Click the Application field and select the applicable SIP applications from the Select Entries panel.
7. Under Outgoing Interfaces, select Manual.
8. For Interface preference, select MPLS.
9. Click OK.
10. Click Create New to create another rule.
11. Enter a name for the rule, such as Internet.
12. Click the Address field and select all from the panel.
13. Under Outgoing Interfaces, select Manual.
14. For Interface preference, select DIA.
15. Click OK.
To configure the firewall policy using the CLI:
config firewall policy
edit 1
set name "1"
set srcintf "dmz"
set dstintf "virtual-wan-link"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set utm-status enable
set fsso disable
set application-list "default"
FortiOS 6.4.2 Administration Guide 566
Fortinet Inc.
SD-WAN
set ssl-ssh-profile "certificate-inspection"
set nat enable
next
end
To configure an SD-WAN rule to use SIP and DIA using the CLI:
config system sdwan
set status enable
config members
edit 1
set interface "MPLS"
next
edit 2
set interface "DIA"
next
end
config service
edit 1
set name "SIP"
set internet-service enable
set internet-service-app-ctrl 34640 152305677 38938 26180 26179 30251
set priority-members 2
next
edit 2
set name "Internet"
set dst "all"
set priority-members 1
next
end
end
All SIP traffic uses MPLS. All other traffic goes to DIA. If DIA is broken, the traffic uses MPLS. If you use VPN instead of
MPLS to run SIP traffic, you must configure a VPN interface, for example vpn1, and then replace member 1 from MPLS
to vpn1 for SD-WAN member.
If no SD-WAN zone is specified, members are added to the default virtual-wan-link zone.
To use the diagnose command to check performance SLA status using the CLI:
# diagnose sys sdwan service 1
Service(1): Address Mode(IPV4) flags=0x0
TOS(0x0/0x0), Protocol(0: 1->65535), Mode(manual)
Members:<<BR>>
1: Seq_num(1), alive, selected
Internet Service: SIP(4294836224 34640) SIP.Method(4294836225 152305677) SIP.Via.NAT
(4294836226 38938) SIP_Media.Type.Application(4294836227 26180) SIP_Message(4294836228
26179) SIP_Voice(4294836229 30251)
FortiOS 6.4.2 Administration Guide 567
Fortinet Inc.
SD-WAN
# diagnose sys sdwan service 2
Service(2): Address Mode(IPV4) flags=0x0
TOS(0x0/0x0), Protocol(0: 1->65535), Mode(manual)
Members:<<BR>>
1: Seq_num(2), alive, selected
Dst address: 0.0.0.0-255.255.255.255
# diagnose sys sdwan internet-service-app-ctrl-list
Ctrl application(SIP 34640):Internet Service ID(4294836224)
Ctrl application(SIP.Method 152305677):Internet Service ID(4294836225)
Ctrl application(SIP.Via.NAT 38938):Internet Service ID(4294836226)
Ctrl application(SIP_Media.Type.Application 26180):Internet Service ID(4294836227)
Ctrl application(SIP_Message 26179):Internet Service ID(4294836228)
Ctrl application(SIP_Voice 30251):Internet Service ID(4294836229)
Dynamic application steering with lowest cost and best quality strategies
In this example, the SD-WAN has three members: two ISPs (DIA_1 and DIA_2) that are used for access to internet
applications, and an MPLS link that is used exclusively as a backup for business critical applications.
Business applications, such as Office365, Google, Dropbox, and SIP, use the Lowest Cost (SLA) strategy to provide
application steering, and traffic falls back to MPLS only if both ISP1 and ISP2 are down. Non-business applications, such
as Facebook and Youtube, use the Best Quality strategy to choose between the ISPs.
To configure the SD-WAN members, static route, and firewall policy in the GUI:
1. Add port1 (DIA_1), port2 (DIA_2), and port3 (MPLS) as SD-WAN members. Set the cost of DIA_1 and DIA_2 to 0,
and MPLS to 20. See Configuring the SD-WAN interface on page 510 for details.
FortiOS 6.4.2 Administration Guide 568
Fortinet Inc.
SD-WAN
2. Configure a static route. See Adding a static route on page 511 for details.
3. Create a firewall policy to allow traffic out on SD-WAN, with an Application Control profile configured. See
Configuring firewall policies for SD-WAN on page 512 for details.
To configure the SD-WAN rule and performance SLA checks for business critical application in the GUI:
1. Go to Network > SD-WAN Rules, and click Create New.
2. Set the name to BusinessCriticalApps.
This rule will steer your business critical traffic to the appropriate link based on the Lowest Cost (SLA).
3. Set Source address to all.
4. Under Destination, set Application to your required applications. In this example: Microsoft.Office.365,
Microsoft.Office.Online, Google.Docs, Dropbox, and SIP.
5. Under Outgoing Interfaces, select Lowest Cost (SLA).
The lowest cost is defined in the SD-WAN member interface settings (see Configuring the SD-WAN interface on
page 510). The lowest possible cost is 0, which represents the most preferred link. In this example, DIA_1 and DIA_
2 both have a cost of 0, while MPLS has a cost of 20 because it is used for backup.
6. In Interface preference, add the interfaces in order of preference when the cost of the links is tied. In this example,
DIA_1, DIA_2, then MPLS.
MPLS will always be chosen last, because it has the highest cost. DIA_1 and DIA_2 have the same cost, so an
interface is selected based on their order in the Interface preference list.
7. Set Required SLA target to ensure that only links that pass your SLA target are chosen in this SD-WAN rule:
a. Click in the Required SLA target field.
b. In the Select Entries pane, click Create. The New Performace SLA pane opens.
c. Set Name to BusinessCritical_HC.
This health check is used for business critical applications in your SD-WAN rule.
d. Leave Protocol set to Ping, and add up to two servers, such as office.com and google.com.
e. Set Participants to Specify, and add all three interfaces: DIA_1, DIA_2, and MPLS.
f. Enable SLA Target.
The attributes in your target determine the quality of your link. The SLA target of each link is compared when
determining which link to use based on the lowest cost. Links that meet the SLA target are preferred over links
that fail, and move to the next step of selection based on cost. If no links meet the SLA target, then they all
move to the next step.
In this example, disable Latency threshold and Jitter threshold, and set Packet loss threshold to 1.
g. Click OK.
h. Select the new performance SLA to set it as the Required SLA target.
When multiple SLA targets are added, you can choose which target to use in the SD-WAN rule.
FortiOS 6.4.2 Administration Guide 569
Fortinet Inc.
SD-WAN
8. Click OK to create the SD-WAN rule.
To configure the SD-WAN rule and performance SLA checks for non-business critical application in the
GUI:
1. Go to Network > SD-WAN Rules, and click Create New.
2. Set the name to NonBusinessCriticalApps.
This rule will steer your non-business critical traffic to the appropriate link based on the Best Quality. No SLA target
must be met, as the best link is selected based on the configured quality criteria and interface preference order.
3. Set Source address to all.
4. Under Destination, set Application to your required applications. In this example: Facebook, and Youtube.
5. Under Outgoing Interfaces, select Best Quality.
6. In Interface preference, add the interfaces in order of preference.
By default, a more preferred link has an advantage of 10% over a less preferred link. For example, when latency is
used, the preferred link’s calculated latency = real latency / (1+10%).
The preferred link advantage can be customized in the CLI when the mode is priority
(Best Quality) or auto:
config system sdwan
config service
edit <id>
set link-cost-threshold <integer>
next
end
end
FortiOS 6.4.2 Administration Guide 570
Fortinet Inc.
SD-WAN
7. Create and apply a new performance SLA profile:
a. Click in the Measured SLA field.
b. In the drop-down list, click Create. The New Performace SLA pane opens.
c. Set Name to NonBusinessCritical_HC.
This health check is used for non-business critical applications in your SD-WAN rule.
d. Leave Protocol set to Ping, and add up to two servers, such as youtube.com and facebook.com.
e. Set Participants to Specify, and add the DIA_1 and DIA_2 interfaces. In this example, MPLS is not used for
non-business critical applications.
f. Leave SLA Target disabled.
g. Click OK.
h. Select the new performance SLA from the list to set it as the Measured SLA.
8. Set Quality criteria as required. In this example, Latency is selected.
For bandwidth related criteria, such as Downstream, Upstream, and Bandwidth (bi-directional), the selection is
based on available bandwidth. An estimated bandwidth should be configured on the interface to provide a baseline,
maximum available bandwidth.
9. Click OK to create the SD-WAN rule.
To configure the SD-WAN members, static route, and firewall policy in the CLI:
1. Configure the interfaces:
config system interface
edit "port1"
set ip <class_ip&net_netmask>
set alias "DIA_1"
set role wan
next
edit "port2"
set ip <class_ip&net_netmask>
FortiOS 6.4.2 Administration Guide 571
Fortinet Inc.
SD-WAN
set alias "DIA_2"
set role wan
next
edit "port3"
set ip <class_ip&net_netmask>
set alias "MPLS"
set role wan
next
end
2. Configure the SD-WAN members:
config system sdwan
set status enable
config members
edit 1
set interface "port1"
set gateway 172.16.20.2
next
edit 2
set interface "port2"
set gateway 172.17.80.2
next
edit 3
set interface "port3"
set gateway 10.100.20.2
set cost 20
next
end
end
If no SD-WAN zone is specified, members are added to the default virtual-wan-link zone.
3. Configure a static route. See Adding a static route on page 511 for details.
4. Create a firewall policy to allow traffic out on SD-WAN, with an Application Control profile configured. See
Configuring firewall policies for SD-WAN on page 512 for details.
To configure the SD-WAN rule and performance SLA checks for business critical application in the CLI:
1. Configure the BusinessCriticalApps_HC health-check:
config system sdwan
config health-check
edit "BusinessCriticalApps_HC"
set server "office.com" "google.com"
set members 1 2 3
config sla
edit 1
set link-cost-factor packet-loss
set packetloss-threshold 1
next
end
next
FortiOS 6.4.2 Administration Guide 572
Fortinet Inc.
SD-WAN
end
end
2. Configure the BusinessCriticalApps service to use Lowest Cost (SLA):
config system sdwan
config service
edit 1
set name "BusinessCriticalApps"
set mode sla
set src "all"
set internet-service enable
set internet-service-app-ctrl 17459 16541 33182 16177 34640
config sla
edit "BusinessCriticalApps_HC"
set id 1
next
end
set priority-members 1 2 3
next
end
end
To configure the SD-WAN rule and performance SLA checks for non-business critical application in the
CLI:
1. Configure the nonBusinessCriticalApps_HC health-check:
config system sdwan
config health-check
edit "NonBusinessCriticalApps_HC"
set server "youtube.com" "facebook.com"
set members 1 2
next
end
end
2. Configure the BusinessCriticalApps service to use Lowest Cost (SLA):
config system sdwan
config service
edit 4
set name "NonBusinessCriticalApps"
set mode priority
set src "all"
set internet-service enable
set internet-service-app-ctrl 15832 31077
set health-check "NonBusinessCriticalApps_HC"
set priority-members 1 2
next
end
end
Verification
Check the following GUI pages, and run the following CLI commands to confirm that your traffic is being steered by the
SD-WAN rules.
FortiOS 6.4.2 Administration Guide 573
Fortinet Inc.
SD-WAN
Health checks
To verify the status of each of the health checks in the GUI:
1. Go to Network > Performance SLA and select each of the health checks from the list.
To verify the status of each of the health checks in the CLI:
# diagnose sys sdwan health-check
Health Check(BusinessCritical_HC):
Seq(1 port1): state(alive), packet-loss(0.000%) latency(12.884), jitter(0.919) sla_map=0x1
Seq(2 port2): state(alive), packet-loss(0.000%) latency(13.018), jitter(0.723) sla_map=0x1
Seq(3 port3): state(alive), packet-loss(0.000%) latency(13.018), jitter(0.923) sla_map=0x1
Health Check(NonBusinessCritical_HC):
Seq(1 port1): state(alive), packet-loss(0.000%) latency(6.888), jitter(0.953) sla_map=0x0
Seq(2 port2): state(alive), packet-loss(0.000%) latency(6.805), jitter(0.830) sla_map=0x0
FortiOS 6.4.2 Administration Guide 574
Fortinet Inc.
SD-WAN
Rule members and hit count
To verify the active members and hit count of the SD-WAN rule in the GUI:
1. Go to Network > SD-WAN Rules.
The interface that is currently selected by the rule has a checkmark next to its name in the Members column. Hover
the cursor over the checkmark to open a tooltip that gives the reason why that member is selected. If multiple
members are selected, only the highest ranked member is highlighted (unless the mode is Maximize Bandwidth
(SLA)).
To verify the active members and hit count of the SD-WAN rule in the CLI:
# diagnose sys sdwan service
Service(3): Address Mode(IPV4) flags=0x0
Gen(13), TOS(0x0/0x0), Protocol(0: 1->65535), Mode(sla), sla-compare-order
Members:
1: Seq_num(1 port1), alive, sla(0x1), cfg_order(0), cost(0), selected
2: Seq_num(2 port2), alive, sla(0x1), cfg_order(1), cost(0), selected
3: Seq_num(3 port3), alive, sla(0x1), cfg_order(2), cost(20), selected
Internet Service: Dropbox(4294836727,0,0,0 17459) Google.Docs(4294836992,0,0,0 16541)
Microsoft.Office.365(4294837472,0,0,0 33182) Microsoft.Office.Online(4294837475,0,0,0 16177)
SIP(4294837918,0,0,0 34640)
Src address:
0.0.0.0-255.255.255.255
Service(4): Address Mode(IPV4) flags=0x0
Gen(211), TOS(0x0/0x0), Protocol(0: 1->65535), Mode(priority), link-cost-factor(latency),
link-cost-threshold(10), heath-check(NonBusinessCritical_HC)
Members:
1: Seq_num(1 port1), alive, latency: 5.712, selected
2: Seq_num(2 port2), alive, latency: 5.511, selected
Internet Service: Facebook(4294836806,0,0,0 15832) YouTube(4294838537,0,0,0 31077)
Src address:
0.0.0.0-255.255.255.255
Applications and sessions
To verify sessions in FortiView:
1. Go to a dashboard and add the Top Cloud Applications by Bytes widget. See Cloud application view on page 114
for details.
FortiOS 6.4.2 Administration Guide 575
Fortinet Inc.
SD-WAN
2. Drill down on an application, such as YouTube, then select the Sessions tab.
To verify applications identified by Application Control in SD-WAN:
# diagnose sys sdwan internet-service-app-ctrl-list
Facebook(15832 4294836697): 31.13.67.20 6 443 Fri April 17 22:33:39 2020
Facebook(15832 4294836697): 31.13.67.35 6 443 Fri April 17 22:33:41 2020
Facebook(15832 4294836697): 31.13.70.36 6 443 Fri April 17 22:36:41 2020
Facebook(15832 4294836697): 157.240.11.22 6 443 Fri April 17 22:36:42 2020
Facebook(15832 4294836697): 157.240.11.35 6 443 Fri April 17 22:36:41 2020
YouTube(31077 4294838227): 172.217.24.150 6 443 Fri April 17 22:32:16 2020
YouTube(31077 4294838227): 172.217.25.78 6 443 Fri April 17 22:32:16 2020
YouTube(31077 4294838227): 216.58.220.129 6 443 Fri April 17 22:32:34 2020
DSCP tag-based traffic steering in SD-WAN
This document demonstrates the Differentiated Services Code Point (DSCP) tag-based traffic steering in Fortinet secure
SD-WAN. You can use this guide as an example to deploy DSCP tag-based traffic steering in Fortinet secure SD-WAN.
DSCP tags are often used to categorize traffic to provide quality of service (QoS). Based on DSCP tags, you can provide
SD-WAN traffic steering on an edge device.
In this example, we have two different departments at the Headquarters site - Customer Service and Marketing. Traffic
from each of these departments is marked with separate DSCP tags by the core switch, and passes through the core
switch to the edge FortiGate. The edge FortiGate reads the DSCP tags and steers traffic to the preferred interface based
on the defined SD-WAN rules.
FortiOS 6.4.2 Administration Guide 576
Fortinet Inc.
SD-WAN
In our example, we consider two types of traffic - social media traffic and VoIP traffic. VoIP traffic from Customer Service
is considered to be more important than social media traffic. Each of these traffic types is marked with a DSCP tag by the
core switch - VoIP traffic is marked with the DSCP tag of 011100, and social media traffic is marked with the DSCP tag
of 001100. The DSCP tagged traffic is then passed on to the edge FortiGate. The edge FortiGate identifies the DSCP
tagged traffic and based on the defined SD-WAN rules, the edge FortiGate steers:
l VoIP traffic to the preferred VPN overlay with the least jitter in order to provide the best quality of voice
communication with the remote VoIP server (PBX)
l Social media traffic to the preferred Internet link with a lower cost (less expensive and less reliable)
If you are familiar with SD-WAN configurations in FortiOS, you can directly jump to the Configuring SD-WAN rules on
page 580 section to learn how to configure the SD-WAN rules to perform traffic steering. Otherwise, you can proceed
with all of the following topics to configure the edge FortiGate:
l Configuring IPsec tunnels on page 578
l Configuring SD-WAN zones on page 578
l Configuring firewall policies on page 579
l Configuring Performance SLA test on page 579
l Configuring SD-WAN rules on page 580
l Results on page 584
FortiOS 6.4.2 Administration Guide 577
Fortinet Inc.
SD-WAN
Configuring IPsec tunnels
In our example, we have two interfaces Internet_A (port1) and Internet_B(port5) on which we have
configured IPsec tunnels Branch-HQ-A and Branch-HQ-B respectively. To learn how to configure IPsec tunnels, refer
to the IPsec VPNs on page 1174 section.
After you have configured the IPsec tunnels as required, verify your IPsec tunnels by navigating to VPN > IPsec Tunnels
from the tree menu on the left side of the GUI.
Configuring SD-WAN zones
In order for us to steer traffic based on SD-WAN rules, first we need to configure SD-WAN interface members and assign
them to SD-WAN zones. To know more about SD-WAN zones, refer to theSD-WAN zones on page 520 section.
In our example, we created two SD-WAN zones. The virtual-wan-link SD-WAN zone for the underlay traffic
passing through the Internet_A(port1) and Internet_B(port5) interfaces, and the Overlay SD-WAN zone for
the overlay traffic passing through the Branch-HQ-A and Branch-HQ-B interfaces.
Verify the configurations on the Network > SD-WAN Zones screen:
FortiOS 6.4.2 Administration Guide 578
Fortinet Inc.
SD-WAN
In the screenshot above, we have configured the Internet_A(port1) and Internet_B
(port5) SD-WAN interface members with their Cost values being 0 and 10 respectively. A
lower Cost value indicates that this member is the primary interface member, and is preferred
more than a member with a higher Cost value when using the Lowest Cost (SLA) strategy.
We also need to configure a static route that points to the SD-WAN interface. To know more about static routes, refer to
the Adding a static route on page 511 section.
Configuring firewall policies
Configure firewall policies for both the overlay and underlay traffic. To know more about firewall policies, refer to the
Policies on page 834 section.
In this example, the Overlay-out policy governs the overlay traffic and the SD-WAN-Out policy governs the underlay
traffic. The firewall policies are configured accordingly.
Once created, verify the firewall policies by navigating to Policy & Objects > Firewall Policy:
The Security Profiles column indicates that the Overlay-out firewall policy for the overlay traffic is set up to not scan any
traffic, while the SD-WAN-Out firewall policy is set to scan all web traffic to identify and govern social media traffic as
Application Control profile is active.
Configuring Performance SLA test
Configure a performance SLA test that will be tied to the SD-WAN interface members we created and assigned to SD-
WAN zones. To know more about Performance SLA, refer to the SLA targets example on page 534 section.
FortiOS 6.4.2 Administration Guide 579
Fortinet Inc.
SD-WAN
In this example, we created a Performance SLA test Default_DNS with Internet_A(port1) and Internet_B
(port5) interface members as participants. We will use the created Performance SLA test to steer all web traffic
passing through the underlays other than social media traffic based on the Lowest Cost (SLA) strategy.
Configuring SD-WAN rules
Configure SD-WAN rules to govern the steering of DSCP tag-based traffic to the appropriate interfaces. Traffic will be
steered based on the Criteria configured as part of the SD-WAN rules configuration.
In our example, we configured three different SD-WAN rules to govern DSCP tagged traffic. We have one SD-WAN rule
each for VoIP traffic, social media traffic (Facebook in this case), and all other web traffic. VoIP traffic is always steered
to either of the two overlay SD-WAN zones - VPN_A_tunnel(Branch-HQ-A) or VPN_B_tunnel(Branch-HQ-B).
Similarly, social media traffic and other web traffic is always steered to either of the two underlay SD-WAN zones -
Internet_A(port1) or Internet_B(port5). The interface that is preferred by the system over another depends
upon the Criteria configured in the SD-WAN rule definition.
We configured the following SD-WAN rules:
l SD-WAN rule for VoIP traffic on page 580
l SD-WAN rule for social media traffic on page 581
l SD-WAN rule for other web traffic on page 582
SD-WAN rule for VoIP traffic
To configure SD-WAN rule for DSCP tagged VoIP traffic using the CLI:
FortiGate # config sys sdwan
config service
edit 5
set name "VoIP-Steer"
set mode priority
set tos 0x70
set tos-mask 0xf0
set dst "all"
set health-check "Default_DNS"
set link-cost-factor jitter
set priority-members 4 3
end
FortiOS 6.4.2 Administration Guide 580
Fortinet Inc.
SD-WAN
The VoIP-Steer SD-WAN rule configured above governs the DSCP tagged VoIP traffic.
DSCP values commonly are 6-bit binary numbers that are padded with zeros at the end. Therefore, in this example,
VoIP traffic with DSCP tag 011100 will become 01110000. This 8-bit binary number 01110000 is represented in its
hexadecimal form 0x70 as the tos (Type of Service bit pattern) value. The tos-mask (Type of Service evaluated bits)
hexadecimal value of 0xf0 (binary 11110000) is used to check the four most significant bits from the tos value in this
case. Hence, the first four bits of the tos (0111) will be used to match the first four bits of the DSCP tag in our policy
above. Only the non-zero bit positions are used for comparison and the zero bit positions are ignored from the tos-
mask.
We used the Best Quality strategy to define the Criteria to select the preferred interface from the overlay SD-WAN zone.
With the Best Quality strategy selected, the interface with the best measured performance is selected. The system
prefers the interface with the least Jitter.
To know more about configuring SD-WAN rules with the Best Quality strategy, refer to the Best quality strategy on page
547 section.
SD-WAN rule for social media traffic
To configure SD-WAN rule for DSCP tagged social media traffic using the CLI:
FortiGate # config sys sdwan
config service
edit 3
set name "Facebook-DSCP-steer"
set tos 0x30
set tos-mask 0xf0
set dst "all"
set priority-members 2 1
end
FortiOS 6.4.2 Administration Guide 581
Fortinet Inc.
SD-WAN
The Facebook-DSCP-steer SD-WAN rule configured above governs the DSCP tagged social media traffic.
DSCP values commonly are 6-bit binary numbers that are padded with zeros at the end. Therefore, in this example,
social media traffic with DSCP tag 001100 will become 00110000. This 8-bit binary number 00110000 is represented
in its hexadecimal form 0x30 as the tos (Type of Service bit pattern) value. The tos-mask (Type of Service evaluated
bits) hexadecimal value of 0xf0 (binary 11110000) is used to check the four most significant bits from the tos value in
this case. Hence, the first four bits of the tos (0011) will be used to match the first four bits of the DSCP tag in our policy
above. Only the non-zero bit positions are used for comparison and the zero bit positions are ignored from the tos-
mask.
We used a manual strategy to select the preferred interface from the underlay SD-WAN zone. We manually select the
preferred interface as Internet_B(port5) to steer all social media traffic to.
To know more about configuring SD-WAN rules with static application steering with a manual strategy, refer to the Static
application steering with a manual strategy on page 565 section.
SD-WAN rule for other web traffic
To configure SD-WAN rule for all other web traffic using the CLI:
FortiGate # config sys sdwan
config service
edit 2
set name "All-traffic"
set mode sla
set dst "all"
config sla
edit "Default_DNS"
set id 1
next
end
set priority-members 1 2
FortiOS 6.4.2 Administration Guide 582
Fortinet Inc.
SD-WAN
end
The All-traffic SD-WAN rule configured above governs all other web traffic.
We used the Lowest Cost (SLA) strategy to define the Criteria to select the preferred interface from the underlay SD-
WAN zone. With the Lowest Cost (SLA) strategy selected, the interface that meets the defined Performance SLA targets
(Default_DNS in our case) is selected. When there is a tie, the interface with the lowest assigned Cost (Internet_A
(port1) in our case) is selected.
To know more about configuring SD-WAN rules with the Lowest Cost (SLA) strategy, refer to the Lowest cost (SLA)
strategy on page 550 section.
Once configured, verify your SD-WAN rules by navigating to Network > SD-WAN Rules:
FortiOS 6.4.2 Administration Guide 583
Fortinet Inc.
SD-WAN
Results
The following sections show the function of the FortiGate and specifically of secure SD-WAN with respect to DSCP
tagged traffic steering, and can be used to confirm that it is setup and running correctly:
l Verifying the DSCP tagged traffic on FortiGate on page 584
l Verifying service rules on page 585
l Verifying traffic steering as per the defined SD-WAN rules on page 586
l Verifying steered traffic leaving the required interface on page 586
Verifying the DSCP tagged traffic on FortiGate
To verify the incoming DSCP tagged traffic, we used packet sniffing and converting the sniffed traffic to a desired format.
To know more about packet sniffing, refer to the Using the FortiOS built-in packet sniffer guide on the Fortinet
Knowledge Base.
For VoIP traffic that is marked with DSCP tag 0x70:
FortiGate # diag sniffer packet any '(ip and ip[1] & 0xfc == 0x70)' 6 0 l
We used the open-source packet analyzer Wireshark to verify that VoIP traffic is tagged with the 0x70 DSCP tag.
FortiOS 6.4.2 Administration Guide 584
Fortinet Inc.
SD-WAN
For web traffic marked with DSCP tag 0x30:
FortiGate # diag sniffer packet any '(ip and ip[1] & 0xfc == 0x30)' 6 0 l
We used the open-source packet analyzer Wireshark to verify that web traffic is tagged with the 0x30 DSCP tag.
Verifying service rules
The following CLI commands show the appropriate DSCP tags and the corresponding interfaces selected by the SD-
WAN rules to steer traffic:
FortiGate # diag sys sdwan service
Service(5): Address Mode(IPV4) flags=0x0
Gen(1), TOS(0x70/0xf0), Protocol(0: 1->65535), Mode(manual)
Members:
1: Seq_num(4 Branch-HQ-B), alive, selected
Dst address:
0.0.0.0-255.255.255.255
Service(3): Address Mode(IPV4) flags=0x0
Gen(1), TOS(0x30/0xf0), Protocol(0: 1->65535), Mode(manual)
Members:
FortiOS 6.4.2 Administration Guide 585
Fortinet Inc.
SD-WAN
1: Seq_num(2 port5), alive, selected
Dst address:
0.0.0.0-255.255.255.255
Service(2): Address Mode(IPV4) flags=0x0
Gen(1), TOS(0x0/0x0), Protocol(0: 1->65535), Mode(sla), sla-compare-order
Members:
1: Seq_num(1 port1), alive, sla(0x1), cfg_order(0), cost(0), selected
2: Seq_num(2 port5), alive, sla(0x1), cfg_order(1), cost(10), selected
Dst address:
0.0.0.0-255.255.255.255
Verifying traffic steering as per the defined SD-WAN rules
Go to Network > SD-WAN Rules to review the Hit Count on the appropriate SD-WAN interfaces.
Verifying steered traffic leaving the required interface
Go to Dashboard > Top Policies to confirm that web traffic (port 443) flows through the right underlay interface members,
and VoIP traffic flows through the right overlay interface member.
Web traffic leaves either Interface_A(port1) or Interface_B(port5).
VoIP traffic leaves the preferred VPN_B_Tunnel(Branch-HQ-B) interface.
FortiOS 6.4.2 Administration Guide 586
Fortinet Inc.
SD-WAN
Advanced routing
The following topics provide instructions on SD-WAN advanced routing:
l Self-originating traffic on page 587
l Using BGP tags with SD-WAN rules on page 591
l BGP multiple path support on page 594
l Controlling traffic with BGP route mapping and service rules on page 597
l Applying BGP route-map to multiple BGP neighbors on page 603
l IBGP and EBGP support in VRF on page 609
Self-originating traffic
This topic applies to FortiOS 6.4.2. In other versions, self-originating (local-out) traffic behaves
differently.
By default, self-originating traffic, such as Syslog, FortiAnalyzer logging, FortiGuard services, remote authentication, and
others, relies on routing table lookups to determine the egress interface that is used to initiate the connection. Policy
routes generated by SD-WAN rules do not apply to this traffic.
Explicit proxy traffic uses policy routes and SD-WAN rules to select an egress interface. Self-originating VXLAN traffic
uses SD-WAN rules to select an egress interface.
For the following features, self-originating traffic can be configured to use SD-WAN rules or a specific interface:
PING
IPv4 and IPv6 pings can be configured to use SD-WAN rules.
execute ping-options use-sdwan {yes | no}
execute ping6-options use-sd-wan {yes | no}
FortiOS 6.4.2 Administration Guide 587
Fortinet Inc.
SD-WAN
DNS
DNS and non-management VDOM DNS traffic can use SD-WAN rules or a specific interface:
config system {dns | vdom-dns}
set interface-select-method {auto | sdwan | specify}
set interface <interface>
end
interface-select-method {auto | Select the interface selection method:
sdwan | specify} l auto: Set the outgoing interface automatically (default)
l sdwan: Set the interface by SD-WAN or policy routing rules
l specify: Set the interface manually.
interface <interface> Specify the outgoing interface. This option is only available and must be
configured when interface-select-method is specify.
FortiGuard
FortiGuard traffic can use SD-WAN rules or a specific interface:
config system fortiguard
set interface-select-method {auto | sdwan | specify}
set interface <interface>
end
RADIUS
RADIUS, and individual accounting servers, traffic can use SD-WAN rules or a specific interface:
config user radius
edit <name>
set interface-select-method {auto | sdwan | specify}
set interface <interface>
config accounting-server
edit <name>
set interface-select-method {auto | sdwan | specify}
set interface <interface>
next
end
next
end
LDAP
LDAP traffic can use SD-WAN rules or a specific interface:
config user ldap
edit <name>
set interface-select-method {auto | sdwan | specify}
set interface <interface>
next
end
FortiOS 6.4.2 Administration Guide 588
Fortinet Inc.
SD-WAN
TACACS+
TACACS+ traffic can use SD-WAN rules or a specific interface:
config user tacacs+
edit <name>
set interface-select-method {auto | sdwan | specify}
set interface <interface>
next
end
Central management
Central management traffic can use SD-WAN rules or a specific interface:
config system central-management
set interface-select-method {auto | sdwan | specify}
set interface <interface>
end
FortiAnalyzer
FortiAnalyzer and FortiAnalyzer Cloud log traffic can use SD-WAN rules or a specific interface:
config log {fortianalyzer | fortianalyzer2 | fortianalyzer3 | fortianalyzer-cloud} {setting
| override-setting}
set interface-select-method {auto | sdwan | specify}
set interface <interface>
end
FortiGate Cloud logging
FortiGate Cloud log traffic can use SD-WAN rules or a specific interface:
config log fortiguard setting
set interface-select-method {auto | sdwan | specify}
set interface <interface>
end
Syslog
Syslog traffic can use SD-WAN rules or a specific interface:
config log {syslog | syslog2 | syslog3} {setting | override-setting}
set interface-select-method {auto | sdwan | specify}
set interface <interface>
end
Log disk upload
Log disk upload traffic can use SD-WAN rules or a specific interface:
config log disk setting
set interface-select-method {auto | sdwan | specify}
set interface <interface>
end
FortiOS 6.4.2 Administration Guide 589
Fortinet Inc.
SD-WAN
FortiSandbox
FortiSandbox traffic can use SD-WAN rules or a specific interface:
config system fortisandbox
set interface-select-method {auto | sdwan | specify}
set interface <interface>
end
FSSO
FSSO traffic can use SD-WAN rules or a specific interface:
config system fsso
set interface-select-method {auto | sdwan | specify}
set interface <interface>
end
NTP server
NTP server traffic can use SD-WAN rules or a specific interface:
config system ntp
config ntpserver
edit <id>
set interface-select-method {auto | sdwan | specify}
set interface <interface>
next
end
end
External resources
External resource traffic can use SD-WAN rules or a specific interface:
config system external-resource
set interface-select-method {auto | sdwan | specify}
set interface <interface>
end
DHCP proxy
DHCP proxy traffic can use SD-WAN rules or a specific interface:
config system settings
set dhcp-proxy-interface-select-method {auto | sdwan | specify}
set dhcp-proxy-interface <interface>
end
dhcp-proxy-interface-select- Select the interface selection method:
method {auto | sdwan | l auto: Set the outgoing interface automatically (default)
specify} l sdwan: Set the interface by SD-WAN or policy routing rules
l specify: Set the interface manually.
dhcp-proxy-interface Specify the outgoing interface. This option is only available and must be
<interface> configured when interface-select-method is specify.
FortiOS 6.4.2 Administration Guide 590
Fortinet Inc.
SD-WAN
DHCP relay
DHCP relay traffic can use SD-WAN rules or a specific interface:
config system interface
edit <interface>
set dhcp-relay-interface-select-method {auto | sdwan | specify}
set dhcp-relay-interface <interface>
next
end
dhcp-relay-interface-select- Select the interface selection method:
method {auto | sdwan | l auto: Set the outgoing interface automatically (default)
specify} l sdwan: Set the interface by SD-WAN or policy routing rules
l specify: Set the interface manually.
dhcp-relay-interface Specify the outgoing interface. This option is only available and must be
<interface> configured when interface-select-method is specify.
CA and local certificate renewal with SCEP
Certificate renewal with SCEP traffic can use SD-WAN rules or a specific interface:
config vpn certificate setting
set interface-select-method {auto | sdwan | specify}
set interface <interface>
end
Using BGP tags with SD-WAN rules
SD-WAN rules can use Border Gateway Protocol (BGP) learned routes as dynamic destinations.
In this example, a customer has two ISP connections, wan1 and wan2. wan1 is used primarily for direct access to
internet applications, and wan2 is used primarily for traffic to the customer's data center.
The customer could create an SD-WAN rule using the data center's IP address range as the destination to force that
traffic to use wan2, but the data center's IP range is not static. Instead, a BGP tag can be used.
For this example, wan2's BGP neighbor advertises the data center's network range with a community number of 30:5.
FortiOS 6.4.2 Administration Guide 591
Fortinet Inc.
SD-WAN
This example assumes that SD-WAN is enabled on the FortiGate, wan1 and wan2 are added as SD-WAN members in
the virtual-wan-link SD-WAN zone, and a policy and static route have been created. See SD-WAN quick start on page
509 for details.
To configure BGP tags with SD-WAN rules:
1. Configure the community list:
config router community-list
edit "30:5"
config rule
edit 1
set action permit
set match "30:5"
next
end
next
end
2. Configure the route map:
config router route-map
edit "comm1"
config rule
edit 1
set match-community "30:5"
set set-route-tag 15
next
end
next
end
3. Configure BGP:
config router bgp
set as xxxxx
set router-id xxxx
config neighbor
edit "10.100.20.2"
set soft-reconfiguration enable
set remote-as xxxxx
set route-map-in "comm1"
next
end
end
4. Configure a firewall policy:
config firewall policy
edit 1
set name "1"
set srcintf "dmz"
set dstintf "virtual-wan-link"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
FortiOS 6.4.2 Administration Guide 592
Fortinet Inc.
SD-WAN
set nat enable
next
end
5. Edit the SD-WAN configuration:
config system sdwan
set status enable
config members
edit 1
set interface "wan1"
set gateway 172.16.20.2
next
edit 2
set interface "wan2"
next
end
config service
edit 1
set name "DataCenter"
set mode manual
set route-tag 15
set priority-members 2
next
end
end
Troubleshooting BGP tags with SD-WAN rules
Check the network community
Use the get router info bgp network command to check the network community:
# get router info bgp network
BGP table version is 5, local router ID is 1.1.1.1
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
S Stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight RouteTag Path
*> 0.0.0.0/0 10.100.1.5 32768 0 ?
*> 1.1.1.1/32 0.0.0.0 32768 0 ?
*> 10.1.100.0/24 172.16.203.2 32768 0 ?
*> 10.100.1.0/30 0.0.0.0 32768 0 ?
*> 10.100.1.4/30 0.0.0.0 32768 0 ?
*> 10.100.1.248/29 0.0.0.0 32768 0 ?
*> 10.100.10.0/24 10.100.1.5 202 10000 15 20 e
*> 172.16.200.0/24 0.0.0.0 32768 0 ?
*> 172.16.200.200/32
0.0.0.0 32768 0 ?
*> 172.16.201.0/24 172.16.200.4 32768 0 ?
*> 172.16.203.0/24 0.0.0.0 32768 0 ?
*> 172.16.204.0/24 172.16.200.4 32768 0 ?
*> 172.16.205.0/24 0.0.0.0 32768 0 ?
*> 172.16.206.0/24 0.0.0.0 32768 0 ?
*> 172.16.207.1/32 0.0.0.0 32768 0 ?
*> 172.16.207.2/32 0.0.0.0 32768 0 ?
FortiOS 6.4.2 Administration Guide 593
Fortinet Inc.
SD-WAN
*> 172.16.212.1/32 0.0.0.0 32768 0 ?
*> 172.16.212.2/32 0.0.0.0 32768 0 ?
*> 172.17.200.200/32
0.0.0.0 32768 0 ?
*> 172.27.1.0/24 0.0.0.0 32768 0 ?
*> 172.27.2.0/24 0.0.0.0 32768 0 ?
*> 172.27.5.0/24 0.0.0.0 32768 0 ?
*> 172.27.6.0/24 0.0.0.0 32768 0 ?
*> 172.27.7.0/24 0.0.0.0 32768 0 ?
*> 172.27.8.0/24 0.0.0.0 32768 0 ?
*> 172.29.1.0/24 0.0.0.0 32768 0 ?
*> 172.29.2.0/24 0.0.0.0 32768 0 ?
*> 192.168.1.0 0.0.0.0 32768 0 ?
Total number of prefixes 28
# get router info bgp network 10.100.11.0
BGP routing table entry for 10.100.10.0/24
Paths: (2 available, best 1, table Default-IP-Routing-Table)
Advertised to non peer-group peers:
172.10.22.2
20
10.100.20.2 from 10.100.20.2 (6.6.6.6)
Origin EGP metric 200, localpref 100, weight 10000, valid, external, best
Community: 30:5 <<<<===========================
Last update: Wen Mar 20 18:45:17 2019
Check dynamic BGP addresses
Use the get router info route-map-address command to check dynamic BGP addresses:
# get router info route-map-address
Extend-tag: 15, interface(wan2:16)
10.100.11.0/255.255.255.0
Check dynamic BGP addresses used in policy routes
Use the diagnose firewall proute list command to check dynamic BGP addresses used in policy routes:
# diagnose firewall proute list
list route policy info(vf=root):
id=4278779905 vwl_service=1(DataCenter) flags=0x0 tos=0x00 tos_mask=0x00 protocol=0
sport=0:65535 iif=0 dport=1-65535 oif=16
source wildcard(1): 0.0.0.0/0.0.0.0
destination wildcard(1): 10.100.11.0/255.255.255.0
BGP multiple path support
BGP supports multiple paths, allowing an ADVPN to advertise multiple paths. This allows BGP to extend and keep
additional network paths according to RFC 7911.
In this example, Spoke1 and Spoke2 each have four VPN tunnels that are connected to the Hub with ADVPN. The
Spoke-Hub has established four BGP neighbors on all four tunnels.
FortiOS 6.4.2 Administration Guide 594
Fortinet Inc.
SD-WAN
Spoke 1 and Spoke 2 can learn four different routes from each other.
To configure the hub:
config router bgp
set as 65505
set router-id 11.11.11.11
set ibgp-multipath enable
set additional-path enable
set additional-path-select 4
config neighbor-group
edit "gr1"
set capability-default-originate enable
set remote-as 65505
set additional-path both
set adv-additional-path 4
set route-reflector-client enable
next
end
config neighbor-range
edit 1
set prefix 10.10.0.0 255.255.0.0
set neighbor-group "gr1"
next
end
config network
edit 12
set prefix 11.11.11.11 255.255.255.255
next
end
end
To configure a spoke:
config router bgp
set as 65505
set router-id 2.2.2.2
set ibgp-multipath enable
FortiOS 6.4.2 Administration Guide 595
Fortinet Inc.
SD-WAN
set additional-path enable
set additional-path-select 4
config neighbor
edit "10.10.100.254"
set soft-reconfiguration enable
set remote-as 65505
set additional-path both
set adv-additional-path 4
next
edit "10.10.200.254"
set soft-reconfiguration enable
set remote-as 65505
set additional-path both
set adv-additional-path 4
next
edit "10.10.203.254"
set soft-reconfiguration enable
set remote-as 65505
set additional-path both
set adv-additional-path 4
next
edit "10.10.204.254"
set soft-reconfiguration enable
set remote-as 65505
set additional-path both
set adv-additional-path 4
next
end
config network
edit 3
set prefix 22.1.1.0 255.255.255.0
next
end
end
To view the BGP routing table on a spoke:
Spoke1 # get router info routing-table bgp
Routing table for VRF=0
B* 0.0.0.0/0 [200/0] via 10.10.200.254, vd2-2, 03:57:26
[200/0] via 10.10.203.254, vd2-3, 03:57:26
[200/0] via 10.10.204.254, vd2-4, 03:57:26
[200/0] via 10.10.100.254, vd2-1, 03:57:26
B 1.1.1.1/32 [200/0] via 11.1.1.1 (recursive via 12.1.1.1), 03:57:51
[200/0] via 11.1.1.1 (recursive via 12.1.1.1), 03:57:51
[200/0] via 11.1.1.1 (recursive via 12.1.1.1), 03:57:51
[200/0] via 11.1.1.1 (recursive via 12.1.1.1), 03:57:51
B 11.11.11.11/32 [200/0] via 10.10.200.254, vd2-2, 03:57:51
[200/0] via 10.10.203.254, vd2-3, 03:57:51
[200/0] via 10.10.204.254, vd2-4, 03:57:51
[200/0] via 10.10.100.254, vd2-1, 03:57:51
B 33.1.1.0/24 [200/0] via 10.10.204.3, vd2-4, 03:57:26
[200/0] via 10.10.203.3, vd2-3, 03:57:26
[200/0] via 10.10.200.3, vd2-2, 03:57:26
[200/0] via 10.10.100.3, vd2-1, 03:57:26
[200/0] via 10.10.204.3, vd2-4, 03:57:26
FortiOS 6.4.2 Administration Guide 596
Fortinet Inc.
SD-WAN
[200/0] via 10.10.203.3, vd2-3, 03:57:26
[200/0] via 10.10.200.3, vd2-2, 03:57:26
[200/0] via 10.10.100.3, vd2-1, 03:57:26
[200/0] via 10.10.204.3, vd2-4, 03:57:26
[200/0] via 10.10.203.3, vd2-3, 03:57:26
[200/0] via 10.10.200.3, vd2-2, 03:57:26
[200/0] via 10.10.100.3, vd2-1, 03:57:26
[200/0] via 10.10.204.3, vd2-4, 03:57:26
[200/0] via 10.10.203.3, vd2-3, 03:57:26
[200/0] via 10.10.200.3, vd2-2, 03:57:26
[200/0] via 10.10.100.3, vd2-1, 03:57:26
Controlling traffic with BGP route mapping and service rules
SD-WAN allows you to select different outbound WAN links based on performance SLAs. It is important that BGP
neighbors are aware of these settings, and changes to them.
BGP can adapt to changes in SD-WAN link SLAs in the following ways:
l Applying different route-maps based on the SD-WAN's health checks. For example, different BGP community
strings can be advertised to BGP neighbors when SLAs are not met.
l Traffic can be selectively forwarded based on the active BGP neighbor. If the SD-WAN service's role matches the
active SD-WAN neighbor, the service is enabled. If there is no match, then the service is disabled.
Example
In this topology, a branch FortiGate has two SD-WAN gateways serving as the primary and secondary gateways. The
gateways reside in different datacenters, but have a full mesh network between them.
This example shows how route-maps and service rules are selected based on performance SLAs and the member that
is currently active. Traffic flows through the primary gateway unless the neighbor's health check is outside of its SLA. If
that happens, traffic routes to the secondary gateway.
BGP NBR1 is the primary neighbor and BGP NBR2 is the secondary neighbor.
The branch FortiGate's wan1 and wan2 interfaces are members of the SD-WAN. When the SD-WAN neighbor status is
primary, it will advertise community 20:1 to BGP NBR1 and 20:5 to BGP NBR2. When the SD-WAN neighbor status is
secondary, it will advertise 20:5 to BGP NBR1 and 20:2 to BGP NBR2.
FortiOS 6.4.2 Administration Guide 597
Fortinet Inc.
SD-WAN
Only one of the primary or secondary neighbors can be active at one time. The SD-WAN neighbor status is used to
decide which neighbor is selected:
l Primary: The primary neighbor takes precedence if its SLAs are met.
l Secondary: If the primary neighbor's SLAs are not met, the secondary neighbor becomes active if its SLAs are met.
l Standalone: If neither the primary or secondary neighbor's SLAs are met, the SD-WAN neighbor status becomes
standalone.
Route map
SD-WAN is configured to let BGP advertise different communities when the SLA status changes. When the SLA is
missed, it triggers BGP to advertise a different community to its BGP neighbor based on its route-map. The BGP
neighbors can use the received community string to select the best path to reach the branch.
To configure BGP route-maps and neighbors:
1. Configure an access for the routes to be matched:
config router access-list
edit "net192"
config rule
edit 1
set prefix 192.168.20.0 255.255.255.0
next
end
next
end
2. Configure the primary neighbor's preferred route-map:
config router route-map
edit "comm1"
config rule
edit 1
set match-ip-address "net192"
set set-community "20:1"
next
end
next
end
3. Configure the secondary neighbor's preferred route-map:
config router route-map
edit "comm2"
config rule
edit 1
set match-ip-address "net192"
set set-community "20:2"
next
end
next
end
FortiOS 6.4.2 Administration Guide 598
Fortinet Inc.
SD-WAN
4. Configure the failed route-map:
config router route-map
edit "comm5"
config rule
edit 1
set match-ip-address "net192"
set set-community "20:5"
next
end
next
end
5. Configure BGP neighbors:
config router bgp
set as 65412
set router-id 1.1.1.1
set ibgp-multipath enable
config neighbor
edit "10.100.1.1"
set soft-reconfiguration enable
set remote-as 20
set route-map-out "comm5"
set route-map-out-preferable "comm1"
next
edit "10.100.1.5"
set soft-reconfiguration enable
set remote-as 20
set route-map-out "comm5"
set route-map-out-preferable "comm2"
next
end
end
When SLAs are met, route-map-out-preferable is used. When SLAs are missed, route-map-out is used.
To configure SD-WAN:
1. Configure the SD-WAN members:
config system sdwan
set status enable
config members
edit 1
set interface "port1"
next
edit 2
set interface "port2"
next
end
end
2. Configure health checks for each member:
config system sdwan
config health-check
edit "ping"
FortiOS 6.4.2 Administration Guide 599
Fortinet Inc.
SD-WAN
set server "10.100.2.22"
set members 1
config sla
edit 1
set link-cost-factor packet-loss
set packetloss-threshold 1
next
end
next
edit "ping2"
set server "10.100.2.23"
set members 2
config sla
edit 1
set link-cost-factor packet-loss
set packetloss-threshold 1
next
end
next
end
end
3. Configure the SD-WAN neighbors and assign them a role and the health checks used to determine if the neighbor
meets the SLA:
SD-WAN neighbors can only be configured in the CLI.
config system sdwan
config neighbor
edit "10.100.1.1"
set member 1
set role primary
set health-check "ping"
set sla-id 1
next
edit "10.100.1.5"
set member 2
set role secondary
set health-check "ping2"
set sla-id 1
next
end
end
Service rules
Create SD-WAN service rules to direct traffic to the primary neighbor when its SLAs are met, and to the secondary
neighbor when the primary neighbor's SLAs are missed.
To configure the SD-WAN service rules:
config system sdwan
config service
edit 1
set name "Primary-Out"
set role primary
set dst "all"
FortiOS 6.4.2 Administration Guide 600
Fortinet Inc.
SD-WAN
set src "all"
set priority-members 1
next
edit 2
set name "Secondary-Out"
set role secondary
set dst "all"
set src "all"
set priority-members 2
next
end
end
If neither the primary nor secondary neighbors are active, the SD-WAN neighbor status
becomes standalone. Only service rules with standalone-action enabled will continue to
pass traffic. This option is disabled by default.
Verification
To verify when the primary neighbor is passing traffic:
1. Verify the health check status:
FortiGate-Branch # diagnose sys sdwan health-check
Health Check(ping):
Seq(1 port1): state(alive), packet-loss(0.000%) latency(0.569), jitter(0.061) sla_
map=0x1
Health Check(ping2):
Seq(2 port2): state(alive), packet-loss(0.000%) latency(3.916), jitter(2.373) sla_
map=0x1
2. Verify SD-WAN neighbor status:
FortiGate-Branch # diagnose sys sdwan neighbor
SD-WAN neighbor status: hold-down(disable), hold-down-time(0), hold_boot_time(0)
Selected role(primary) last_secondary_select_time/current_time in seconds 0/572
Neighbor(10.100.1.1): member(1) role(primary)
Health-check(ping:1) sla-pass selected alive
Neighbor(10.100.1.5): member(2) role(secondary)
Health-check(ping2:1) sla-pass alive
3. Verify service rules status:
FortiGate-Branch # diagnose sys sdwan service
Service(1): Address Mode(IPV4) flags=0x0
Gen(3), TOS(0x0/0x0), Protocol(0: 1->65535), Mode(manual)
Service role: primary
Members:
1: Seq_num(1 port1), alive, selected
Src address:
0.0.0.0-255.255.255.255
Dst address:
0.0.0.0-255.255.255.255
FortiOS 6.4.2 Administration Guide 601
Fortinet Inc.
SD-WAN
Service(2): Address Mode(IPV4) flags=0x0
Gen(6), TOS(0x0/0x0), Protocol(0: 1->65535), Mode(manual)
Service role: secondary, disabled by unselected.
Members:
1: Seq_num(2 port2), alive, selected
Src address:
0.0.0.0-255.255.255.255
Dst address:
0.0.0.0-255.255.255.255
4. Verify neighbor routers:
a. Primary neighbor router:
FGT-NBR1 # get router info bgp network 192.168.20.0
BGP routing table entry for 192.168.20.0/24
Paths: (1 available, best #1, table Default-IP-Routing-Table)
Not advertised to any peer
64512
10.100.1.2 from 10.100.1.2 (192.168.122.98)
Origin IGP metric 0, localpref 100, valid, external, best
Community: 20:1
Last update: Thu Apr 30 13:41:40 2020
b. Secondary neighbor router:
FGT-NBR2 # get router info bgp network 192.168.20.0
VRF 0 BGP routing table entry for 192.168.20.0/24
Paths: (1 available, best #1, table Default-IP-Routing-Table)
Not advertised to any peer
Original VRF 0
64512
10.100.1.6 from 10.100.1.6 (192.168.122.98)
Origin IGP metric 0, localpref 100, valid, external, best
Community: 20:5
Last update: Thu Apr 30 13:41:39 2020
To verify when the secondary neighbor is passing traffic:
1. Verify the health check status:
FortiGate-Branch # diagnose sys sdwan health-check
Health Check(ping):
Seq(1 port1): state(dead), packet-loss(54.000%) sla_map=0x0
Health Check(ping2):
Seq(2 port2): state(alive), packet-loss(0.000%) latency(4.339), jitter(3.701) sla_
map=0x1
2. Verify SD-WAN neighbor status:
FortiGate-Branch # diagnose sys sdwan neighbor
SD-WAN neighbor status: hold-down(disable), hold-down-time(0), hold_boot_time(0)
Selected role(secondary) last_secondary_select_time/current_time in seconds
936/936
Neighbor(10.100.1.1): member(1) role(primary)
Health-check(ping:1) sla-fail dead
Neighbor(10.100.1.5): member(2) role(secondary)
Health-check(ping2:1) sla-pass selected alive
FortiOS 6.4.2 Administration Guide 602
Fortinet Inc.
SD-WAN
3. Verify service rules status:
FortiGate-Branch # diagnose sys sdwan service
Service(1): Address Mode(IPV4) flags=0x0
Gen(4), TOS(0x0/0x0), Protocol(0: 1->65535), Mode(manual)
Service role: primary, disabled by unselected.
Members:
1: Seq_num(1 port1), alive, selected
Src address:
0.0.0.0-255.255.255.255
Dst address:
0.0.0.0-255.255.255.255
Service(2): Address Mode(IPV4) flags=0x0
Gen(7), TOS(0x0/0x0), Protocol(0: 1->65535), Mode(manual)
Service role: secondary
Members:
1: Seq_num(2 port2), alive, selected
Src address:
0.0.0.0-255.255.255.255
Dst address:
0.0.0.0-255.255.255.255
4. Verify neighbor routers:
a. Primary neighbor router:
FGT-NBR1 # get router info bgp network 192.168.20.0
BGP routing table entry for 192.168.20.0/24
Paths: (1 available, best #1, table Default-IP-Routing-Table)
Not advertised to any peer
64512
10.100.1.2 from 10.100.1.2 (192.168.122.98)
Origin IGP metric 0, localpref 100, valid, external, best
Community: 20:5
Last update: Thu Apr 30 15:41:58 2020
b. Secondary neighbor router:
FGT-NBR2 # get router info bgp network 192.168.20.0
VRF 0 BGP routing table entry for 192.168.20.0/24
Paths: (1 available, best #1, table Default-IP-Routing-Table)
Not advertised to any peer
Original VRF 0
64512
10.100.1.6 from 10.100.1.6 (192.168.122.98)
Origin IGP metric 0, localpref 100, valid, external, best
Community: 20:2
Last update: Thu Apr 30 15:42:07 2020
Applying BGP route-map to multiple BGP neighbors
Controlling traffic with BGP route mapping and service rules explained how BGP can apply different route-maps to the
primary and secondary SD-WAN neighbors based on SLA health checks.
FortiOS 6.4.2 Administration Guide 603
Fortinet Inc.
SD-WAN
In this example, SD-WAN neighbors that are not bound to primary and secondary roles are configured.
The FortiGate has multiple SD-WAN links and has formed BGP neighbors with both ISPs.
ISP1 is used primarily for outbound traffic, and has an SD-WAN service rule using the lowest cost algorithm applied to it.
When SLAs for ISP1 are not met, it will fail over to the MPLS line.
Inbound traffic is allowed by both WAN links, with each WAN advertising a community string when SLAs are met. When
SLAs are not met, the WAN links advertise a different community string.
This example uses two SD-WAN links. The topology can be expanded to include more links as needed.
To configure BGP route-maps and neighbors:
1. Configure an access list for routes to be matched:
config router access-list
edit "net192"
config rule
edit 1
set prefix 192.168.20.0 255.255.255.0
next
end
next
end
2. Configure route-maps for neighbor ISP1:
config router route-map
edit "comm1"
config rule
edit 1
set match-ip-address "net192"
set set-community "64511:1"
next
end
next
edit "comm-fail1"
config rule
edit 1
set match-ip-address "net192"
set set-community "64511:5"
next
FortiOS 6.4.2 Administration Guide 604
Fortinet Inc.
SD-WAN
end
next
end
3. Configure route-maps for neighbor ISP2:
config router route-map
edit "comm2"
config rule
edit 1
set match-ip-address "net192"
set set-community "64522:1"
next
end
next
edit "comm-fail2"
config rule
edit 1
set match-ip-address "net192"
set set-community "64522:5"
next
end
next
end
4. Configure the BGP neighbors:
config router bgp
set as 64512
set keepalive-timer 1
set holdtime-timer 3
config neighbor
edit "192.168.2.1"
set soft-reconfiguration enable
set remote-as 64511
set route-map-out "comm-fail1"
set route-map-out-preferable "comm1"
next
edit "172.31.0.1"
set soft-reconfiguration enable
set remote-as 64522
set route-map-out "comm-fail2"
set route-map-out-preferable "comm2"
next
end
config network
edit 1
set prefix 192.168.20.0 255.255.255.0
next
end
end
When SLAs are met, route-map-out-preferable is used. When SLAs are missed, route-map-out is used.
FortiOS 6.4.2 Administration Guide 605
Fortinet Inc.
SD-WAN
To configure SD-WAN:
1. Configure the SD-WAN members:
config system sdwan
set status enable
config members
edit 1
set interface "port1"
set gateway 192.168.2.1
next
edit 2
set interface "MPLS"
set cost 20
next
end
end
2. Configure the health checks that must be met:
config system sdwan
config health-check
edit "pingserver"
set server "8.8.8.8"
set members 2 1
config sla
edit 1
set link-cost-factor packet-loss
set packetloss-threshold 2
next
end
next
end
end
3. Configure the SD-WAN neighbors and assign them a role and the health checks used to determine if the neighbor
meets the SLA:
When no role is defined, the default role, standalone, is used.
config system sdwan
config neighbor
edit "192.168.2.1"
set member 1
set health-check "pingserver"
set sla-id 1
next
edit "172.31.0.1"
set member 2
set health-check "pingserver"
set sla-id 1
next
end
end
FortiOS 6.4.2 Administration Guide 606
Fortinet Inc.
SD-WAN
Service rules
Create SD-WAN service rules to direct traffic to the SD-WAN links based on the lowest cost algorithm The same SLA
health check and criteria that are used for the SD-WAN neighbor are used for this SD-WAN service rule.
When no roles are defined in the service rule, the default role, standalone, is used.
To configure the SD-WAN service rule:
config system sdwan
config service
edit 1
set name "OutboundAll"
set mode sla
set dst "all"
set src "all"
config sla
edit "pingserver"
set id 1
next
end
set priority-members 1 2
next
end
end
Verification
To verify that when both SLAs are met, port1 is selected due to its lower cost:
1. Verify the health check status:
FortiGate-Branch # diagnose sys sdwan health-check
Health Check(pingserver):
Seq(2 MPLS): state(alive), packet-loss(0.000%) latency(24.709), jitter(14.996) sla_
map=0x1
Seq(1 port1): state(alive), packet-loss(0.000%) latency(28.771), jitter(14.840) sla_
map=0x1
2. Verify SD-WAN neighbor status:
FortiGate-Branch # diagnose sys sdwan neighbor
Neighbor(192.168.2.1): member(1) role(standalone)
Health-check(pingserver:1) sla-pass selected alive
Neighbor(172.31.0.1): member(2) role(standalone)
Health-check(pingserver:1) sla-pass selected alive
3. Verify service rules status:
Because the service role is standalone, it matches both neighbors. The mode (SLA) determines that port1 is
lower cost.
FortiGate-Branch # diagnose sys sdwan service
Service(1): Address Mode(IPV4) flags=0x0
Gen(1), TOS(0x0/0x0), Protocol(0: 1->65535), Mode(sla), sla-compare-order
Service role: standalone
Members:
FortiOS 6.4.2 Administration Guide 607
Fortinet Inc.
SD-WAN
1: Seq_num(1 port1), alive, sla(0x1), cfg_order(0), cost(0), selected
2: Seq_num(2 MPLS), alive, sla(0x1), cfg_order(1), cost(20), selected
Src address:
0.0.0.0-255.255.255.255
Dst address:
0.0.0.0-255.255.255.255
4. Verify neighbor routers:
a. Primary neighbor router:
FGT-NBR1 # get router info bgp network 192.168.20.0
BGP routing table entry for 192.168.20.0/24
Paths: (1 available, best #1, table Default-IP-Routing-Table)
Not advertised to any peer
64512
192.168.2.5 from 192.168.2.5 (192.168.122.98)
Origin IGP metric 0, localpref 100, valid, external, best
Community: 64511:1
Last update: Thu Apr 30 23:59:05 2020
b. Secondary neighbor router:
FGT-NBR2 # get router info bgp network 192.168.20.0
VRF 0 BGP routing table entry for 192.168.20.0/24
Paths: (1 available, best #1, table Default-IP-Routing-Table)
Not advertised to any peer
Original VRF 0
64512
172.31.0.2 from 172.31.0.2 (192.168.122.98)
Origin IGP metric 0, localpref 100, valid, external, best
Community: 64522:1
Last update: Fri May 1 00:11:28 2020
To verify that when neighbor ISP1 misses SLAs, MPLS is selected and BGP advertises a different
community string for ISP1:
1. Verify the health check status:
FortiGate-Branch # diagnose sys sdwan health-check
Health Check(pingserver):
Seq(2 MPLS): state(alive), packet-loss(0.000%) latency(25.637), jitter(17.820) sla_
map=0x1
Seq(1 port1): state(dead), packet-loss(16.000%) sla_map=0x0
2. Verify SD-WAN neighbor status:
FortiGate-Branch # diagnose sys sdwan neighbor
Neighbor(192.168.2.1): member(1) role(standalone)
Health-check(pingserver:1) sla-fail dead
Neighbor(172.31.0.1): member(2) role(standalone)
Health-check(pingserver:1) sla-pass selected alive
3. Verify service rules status:
As SLA failed for neighbor ISP1, MPLS is preferred.
FortiGate-Branch # diagnose sys sdwan service
FortiOS 6.4.2 Administration Guide 608
Fortinet Inc.
SD-WAN
Service(1): Address Mode(IPV4) flags=0x0
Gen(3), TOS(0x0/0x0), Protocol(0: 1->65535), Mode(sla), sla-compare-order
Service role: standalone
Members:
1: Seq_num(2 MPLS), alive, sla(0x1), cfg_order(1), cost(20), selected
2: Seq_num(1 port1), dead, sla(0x0), cfg_order(0), cost(0)
Src address:
0.0.0.0-255.255.255.255
Dst address:
0.0.0.0-255.255.255.255
4. Verify neighbor routers:
The community received on ISP1 is updated.
a. Primary neighbor router:
FGT-NBR1 # get router info bgp network 192.168.20.0
BGP routing table entry for 192.168.20.0/24
Paths: (1 available, best #1, table Default-IP-Routing-Table)
Not advertised to any peer
64512
192.168.2.5 from 192.168.2.5 (192.168.122.98)
Origin IGP metric 0, localpref 100, valid, external, best
Community: 64511:5
Last update: Fri May 1 00:33:26 2020
b. Secondary neighbor router:
FGT-NBR2 # get router info bgp network 192.168.20.0
VRF 0 BGP routing table entry for 192.168.20.0/24
Paths: (1 available, best #1, table Default-IP-Routing-Table)
Not advertised to any peer
Original VRF 0
64512
172.31.0.2 from 172.31.0.2 (192.168.122.98)
Origin IGP metric 0, localpref 100, valid, external, best
Community: 64522:1
Last update: Fri May 1 00:22:42 2020
IBGP and EBGP support in VRF
Support is included for internal and external border gateway protocols (IBGP and EBGP) in virtual routing and forwarding
(VRF).
FortiGate can establish neighbor connections with other FortiGates or routers, and the learned routes are put into
different VRF tables according to the neighbor's settings.
This example uses the following topology:
FortiOS 6.4.2 Administration Guide 609
Fortinet Inc.
SD-WAN
l BGP routes learned from the Router1 neighbor are put into vrf10.
l BGP routes learned from the Router2 neighbor are put into vrf20.
To configure this example:
config system interface
edit port1
set vrf 10
next
edit port2
set vrf 20
next
end
config router bgp
config neighbor
edit "192.168.1.1"
set update-source port1
next
edit "192.168.2.1"
set interface port2
next
end
end
Results
Using the above topology:
l Both Router1 and Router2 establish OSPF and BGP neighbor with the FortiGate.
l Router1 advertises 10.10.1.0/24 into OSPF and 10.10.2.0/24 into BGP.
l Router2 advertises 20.20.1.0/24 into OSPF and 20.20.2.0/24 into BGP.
When port1 and port2 have not set VRF, all of the routing is in VRF=0:
FortiOS 6.4.2 Administration Guide 610
Fortinet Inc.
SD-WAN
# get router info routing-table all
Codes: K - kernel, C - connected, S - static, R - RIP, B - BGP
O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default
Routing table for VRF=0
S* 0.0.0.0/0 [5/0] via 10.0.1.254, port9
C 10.0.1.0/24 is directly connected, port9
O 10.10.1.0/24 [110/10] via 192.168.1.1, port1, 00:18:31
B 10.10.2.0/24 [20/200] via 192.168.1.1, port1, 00:01:31
O 20.20.1.0/22 [110/10] via 192.168.2.1, port2, 00:19:05
B 20.20.2.0/24 [20/200] via 192.168.2.1, port2, 00:01:31
C 192.168.1.0/24 is directly connected, port1
C 192.168.2.0/24 is directly connected, port2
After VRF is set for BGP, BGP routes are added to the VRF tables along with OSPF and connected routes:
# get router info routing-table all
Codes: K - kernel, C - connected, S - static, R - RIP, B - BGP
O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default
Routing table for VRF=0
S* 0.0.0.0/0 [5/0] via 10.0.1.254, port9
C 10.0.1.0/24 is directly connected, port9
Routing table for VRF=10
O 10.10.1.0/24 [110/10] via 192.168.1.1, port1, 00:18:31
B 10.10.2.0/24 [20/200] via 192.168.1.1, port1, 00:01:31
C 192.168.1.0/24 is directly connected, port1
Routing table for VRF=20
O 20.20.1.0/22 [110/10] via 192.168.2.1, port2, 00:19:05
B 20.20.2.0/24 [20/200] via 192.168.2.1, port2, 00:01:31
C 192.168.2.0/24 is directly connected, port2
BGP neighbor groups
This feature is also supported in the BGP neighbor groups. For example:
config router bgp
config neighbor-group
edit "FGT"
set update-source "port1"
next
end
config neighbor-range
edit 1
set prefix 172.16.201.0 255.255.255.0
set neighbor-group "FGT"
next
FortiOS 6.4.2 Administration Guide 611
Fortinet Inc.
SD-WAN
end
end
Note that the set interface command is not supported.
VPN overlay
The following topics provide instructions on SD-WAN VPN overlays:
l ADVPN and shortcut paths on page 612
l SD-WAN monitor on ADVPN shortcuts on page 625
l SD-WAN integration with OCVPN on page 626
l Forward error correction on VPN overlay networks on page 633
l Dual VPN tunnel wizard on page 636
l Duplicate packets on other zone members on page 637
ADVPN and shortcut paths
This topic provides an example of how to use SD-WAN and ADVPN together.
ADVPN (Auto Discovery VPN) is an IPsec technology that allows a traditional hub-and-spoke VPN’s spokes to establish
dynamic, on-demand, direct tunnels between each other to avoid routing through the topology's hub device. The primary
advantage is that it provides full meshing capabilities to a standard hub-and-spoke topology. This greatly reduces the
provisioning effort for full spoke-to-spoke low delay reachability, and addresses the scalability issues associated with
very large fully meshed VPN networks.
If a customer's head office and branch offices all have two or more internet connections, they can build a dual-hub
ADVPN network. Combined with SD-WAN technology, the customer can load-balance traffic to other offices on multiple
dynamic tunnels, control specific traffic using specific connections, or choose better performance connections
dynamically.
SD-WAN load-balance mode rules (or services) do not support ADVPN members. Other
modes' rules, such as SLA and priority, support ADVPN members.
This topic covers three parts:
1. Configure dual-hub ADVPN with multiple branches.
2. Configure BGP to exchange routing information among hubs and spokes.
3. Configure SD-WAN on spoke to do load-balancing and control traffic.
FortiOS 6.4.2 Administration Guide 612
Fortinet Inc.
SD-WAN
Configuration example
A typical ADVPN configuration with SD-WAN usually has two hubs, and each spoke connects to two ISPs and
establishes VPN tunnels with both hubs.
This example shows a hub-and-spoke configuration using two hubs and one spoke:
l Hub1 and Hub2 both use wan1 to connect to the ISPs and port10 to connect to internal network.
l Spoke1 uses wan1 to connect to ISP1 and wan2 to connect to ISP2.
l wan1 sets up VPN to hub1.
l wan2 sets up VPN to hub2.
The SD-WAN is configured on the spoke. It uses the two VPN interfaces as members and two rules to control traffic to
headquarters or other spokes using ADVPN VPN interfaces. You can create more rules if required.
For this example:
l Use SD-WAN member 1 (via ISP1) and its dynamic shortcuts for financial department traffic if member 1 meets SLA
requirements. If it doesn't meet SLA requirements, it will use SD-WAN member 2 (via ISP2).
l Use SD-WAN member 2 (via ISP2) and its dynamic shortcuts for engineering department traffic.
l Load balance other traffic going to hubs and other spokes between these two members.
l Set up all other traffic to go with their original ISP connection. All other traffic does not go through SD-WAN.
l Set up basic network configuration to let all hubs and spokes connect to their ISPs and the Internet.
FortiOS 6.4.2 Administration Guide 613
Fortinet Inc.
SD-WAN
Hub internal network 172.16.101.0/24
Spoke1 internal network 10.1.100.0/24
ADVPN 1 network 10.10.100.0/24
ADVPN 2 network 10.10.200.0/24
Hub1 wan1 IP 11.1.1.11
Hub2 wan1 IP 11.1.2.11
Hub1 VPN IP 10.10.100.254
Hub2 VPN IP 10.10.200.254
Spoke1 to hub1 VPN IP 10.10.100.2
Spoke1 to hub2 VPN IP 10.10.200.2
Ping server in Headquarters 11.11.11.11
Internal subnet of spoke1 22.1.1.0/24
Internal subnet of spoke2 33.1.1.0/24
Firewall addresses Configure hub_subnets and spoke_subnets before using in policies. These can
be customized.
The GUI does not support some ADVPN related options, such as auto-discovery-sender, auto-discovery-receiver, auto-
discovery-forwarder, and IBGP neighbor-group setting, so this example only provides CLI configuration commands.
Hub1 sample configuration
To configure the IPsec phase1 and phase2 interface:
config vpn ipsec phase1-interface
edit "hub-phase1"
set type dynamic
set interface "wan1"
set peertype any
set net-device disable
set proposal aes128-sha256 aes256-sha256 3des-sha256 aes128-sha1 aes256-sha1 3des-
sha1
set add-route disable
set dpd on-idle
set auto-discovery-sender enable
set tunnel-search nexthop
set psksecret sample
set dpd-retryinterval 5
next
end
config vpn ipsec phase2-interface
edit "hub-phase2"
set phase1name "hub-phase1"
set proposal aes128-sha1 aes256-sha1 3des-sha1 aes128-sha256 aes256-sha256 3des-
sha256
FortiOS 6.4.2 Administration Guide 614
Fortinet Inc.
SD-WAN
next
end
To configure the VPN interface and BGP:
config system interface
edit "hub-phase1"
set ip 10.10.100.254 255.255.255.255
set remote-ip 10.10.100.253 255.255.255.0
next
end
config router bgp
set as 65505
config neighbor-group
edit "advpn"
set link-down-failover enable
set remote-as 65505
set route-reflector-client enable
next
end
config neighbor-range
edit 1
set prefix 10.10.100.0 255.255.255.0
set neighbor-group "advpn"
next
end
config network
edit 1
set prefix 172.16.101.0 255.255.255.0
next
edit 2
set prefix 11.11.11.0 255.255.255.0
next
end
end
To configure the firewall policy:
config firewall policy
edit 1
set name "spoke2hub"
set srcintf "hub-phase1"
set dstintf "port10"
set srcaddr "spoke_subnets"
set dstaddr "hub_subnets"
set action accept
set schedule "always"
set service "ALL"
set comments "allow traffic from spokes to headquater"
next
edit 2
set name "spoke2spoke"
set srcintf "hub-phase1"
set dstintf "hub-phase1"
set srcaddr "spoke_subnets"
set dstaddr "spoke_subnets"
FortiOS 6.4.2 Administration Guide 615
Fortinet Inc.
SD-WAN
set action accept
set schedule "always"
set service "ALL"
set comments "allow traffic from spokes to spokes"
next
edit 3
set name "internal2spoke"
set srcintf "port10"
set dstintf "hub-phase1"
set srcaddr "hub_subnets"
set dstaddr "spoke_subnets"
set action accept
set schedule "always"
set service "ALL"
set comments "allow traffic from headquater to spokes"
next
end
Hub2 sample configuration
Hub2 configuration is the same as hub1 except the wan1 IP address, VPN interface IP address, and BGP neighbor-
range prefix.
To configure the IPsec phase1 and phase2 interface:
config vpn ipsec phase1-interface
edit "hub-phase1"
set type dynamic
set interface "wan1"
set peertype any
set net-device disable
set proposal aes128-sha256 aes256-sha256 3des-sha256 aes128-sha1 aes256-sha1 3des-
sha1
set add-route disable
set dpd on-idle
set auto-discovery-sender enable
set tunnel-search nexthop
set psksecret sample
set dpd-retryinterval 5
next
end
config vpn ipsec phase2-interface
edit "hub-phase2"
set phase1name "hub-phase1"
set proposal aes128-sha1 aes256-sha1 3des-sha1 aes128-sha256 aes256-sha256 3des-
sha256
next
end
To configure the VPN interface and BGP:
config system interface
edit "hub-phase1"
set ip 10.10.200.254 255.255.255.255
set remote-ip 10.10.200.253 255.255.255.0
FortiOS 6.4.2 Administration Guide 616
Fortinet Inc.
SD-WAN
next
end
config router bgp
set as 65505
config neighbor-group
edit "advpn"
set link-down-failover enable
set remote-as 65505
set route-reflector-client enable
next
end
config neighbor-range
edit 1
set prefix 10.10.200.0 255.255.255.0
set neighbor-group "advpn"
next
end
config network
edit 1
set prefix 172.16.101.0 255.255.255.0
next
edit 2
set prefix 11.11.11.0 255.255.255.0
next
end
end
To configure the firewall policy:
config firewall policy
edit 1
set name "spoke2hub"
set srcintf "hub-phase1"
set dstintf "port10"
set srcaddr "spoke_subnets"
set dstaddr "hub_subnets"
set action accept
set schedule "always"
set service "ALL"
set comments "allow traffic from spokes to headquater"
next
edit 2
set name "spoke2spoke"
set srcintf "hub-phase1"
set dstintf "hub-phase1"
set srcaddr "spoke_subnets"
set dstaddr "spoke_subnets"
set action accept
set schedule "always"
set service "ALL"
set comments "allow traffic from spokes to spokes"
next
edit 3
set name "internal2spoke"
set srcintf "port10"
set dstintf "hub-phase1"
FortiOS 6.4.2 Administration Guide 617
Fortinet Inc.
SD-WAN
set srcaddr "hub_subnets"
set dstaddr "spoke_subnets"
set action accept
set schedule "always"
set service "ALL"
set comments "allow traffic from headquater to spokes"
next
end
Spoke1 sample configuration
To configure the IPsec phase1 and phase2 interface:
config vpn ipsec phase1-interface
edit "spoke1-phase1"
set interface "wan1"
set peertype any
set net-device enable
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
set add-route disable
set dpd on-idle
set auto-discovery-receiver enable
set remote-gw 11.1.1.11
set psksecret sample
set dpd-retryinterval 5
next
edit "spoke1-2-phase1"
set interface "wan2"
set peertype any
set net-device enable
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
set add-route disable
set dpd on-idle
set auto-discovery-receiver enable
set remote-gw 11.1.2.11
set psksecret sample
set dpd-retryinterval 5
next
end
config vpn ipsec phase2-interface
edit "spoke1-phase2"
set phase1name "spoke1-phase1"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm aes256gcm
chacha20poly1305
set auto-negotiate enable
next
edit "spoke1-2-phase2"
set phase1name "spoke1-2-phase1"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm aes256gcm
chacha20poly1305
set auto-negotiate enable
next
end
FortiOS 6.4.2 Administration Guide 618
Fortinet Inc.
SD-WAN
To configure the VPN interface and BGP:
config system interface
edit "spoke1-phase1"
set ip 10.10.100.2 255.255.255.255
set remote-ip 10.10.100.254 255.255.255.0
next
edit "spoke1-2-phase1"
set ip 10.10.200.2 255.255.255.255
set remote-ip 10.10.200.254 255.255.255.0
next
end
config router bgp
set as 65505
config neighbor
edit "10.10.100.254"
set advertisement-interval 1
set link-down-failover enable
set remote-as 65505
next
edit "10.10.200.254"
set advertisement-interval 1
set link-down-failover enable
set remote-as 65505
next
end
config network
edit 1
set prefix 10.1.100.0 255.255.255.0
next
end
end
To configure SD-WAN:
config system sdwan
set status enable
config members
edit 1
set interface "spoke1-phase1"
next
edit 2
set interface "spoke1-2-phase1"
next
end
config health-check
edit "ping"
set server "11.11.11.11"
set members 1 2
config sla
edit 1
set latency-threshold 200
set jitter-threshold 50
set packetloss-threshold 5
next
end
FortiOS 6.4.2 Administration Guide 619
Fortinet Inc.
SD-WAN
next
end
config service
edit 1
set mode sla
set dst "finacial-department"
config sla
edit "ping"
set id 1
next
end
set priority-member 1 2
next
edit 2
set member 2
set dst "engineering-department"
next
end
end
If no SD-WAN zone is specified, members are added to the default virtual-wan-link zone.
To configure the firewall policy:
config firewall policy
edit 1
set name "outbound_advpn"
set srcintf "internal"
set dstintf "virtual-wan-link"
set srcaddr "spoke_subnets"
set dstaddr "spoke_subnets" "hub_subnets"
set action accept
set schedule "always"
set service "ALL"
set comments "allow internal traffic going out to headquater and other spokes"
next
edit 2
set name "inbound_advpn"
set srcintf "virtual-wan-link"
set dstintf "internal"
set srcaddr "spoke_subnets" "hub_subnets"
set dstaddr "spoke_subnets"
set action accept
set schedule "always"
set service "ALL"
set comments "allow headquater and other spokes traffic coming in"
next
end
FortiOS 6.4.2 Administration Guide 620
Fortinet Inc.
SD-WAN
Troubleshooting ADVPN and shortcut paths
Before spoke vs spoke shortcut VPN is established
Use the following CLI commands to check status before spoke vs spoke shortcut VPN is established.
# get router info bgp summary
BGP router identifier 2.2.2.2, local AS number 65505
BGP table version is 13
3 BGP AS-PATH entries
0 BGP community entries
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
10.10.100.254 4 65505 3286 3270 11 0 0 00:02:15 5
10.10.200.254 4 65505 3365 3319 12 0 0 00:02:14 5
Total number of neighbors 2
# get router info routing-table bgp
Routing table for VRF=0
B* 0.0.0.0/0 [200/0] via 10.10.200.254, spoke1-2-phase1, 00:00:58
[200/0] via 10.10.100.254, spoke1-phase1, 00:00:58
B 1.1.1.1/32 [200/0] via 11.1.1.1 (recursive via 12.1.1.1), 00:01:29
[200/0] via 11.1.1.1 (recursive via 12.1.1.1), 00:01:29
B 11.11.11.0/24 [200/0] via 10.10.200.254, spoke1-2-phase1, 00:01:29
[200/0] via 10.10.100.254, spoke1-phase1, 00:01:29
B 33.1.1.0/24 [200/0] via 10.10.200.3, spoke1-2-phase1, 00:00:58
[200/0] via 10.10.100.3, spoke1-phase1, 00:00:58
[200/0] via 10.10.200.3, spoke1-2-phase1, 00:00:58
[200/0] via 10.10.100.3, spoke1-phase1, 00:00:58
# diagnose vpn tunnel list
list all ipsec tunnel in vd 3
------------------------------------------------------
name=spoke1-phase1 ver=1 serial=5 12.1.1.2:0->11.1.1.11:0 dst_mtu=15324
bound_if=48 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/536 options[0218]=npu create_dev
frag-rfc accept_traffic=1
proxyid_num=1 child_num=0 refcnt=22 ilast=0 olast=0 ad=r/2
stat: rxp=1 txp=185 rxb=16428 txb=11111
dpd: mode=on-demand on=1 idle=20000ms retry=3 count=0 seqno=4
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=spoke1 proto=0 sa=1 ref=4 serial=1 auto-negotiate adr
src: 0:0.0.0.0/0.0.0.0:0
dst: 0:0.0.0.0/0.0.0.0:0
SA: ref=6 options=1a227 type=00 soft=0 mtu=15262 expire=42820/0B replaywin=2048
seqno=ba esn=0 replaywin_lastseq=00000002 itn=0 qat=0
life: type=01 bytes=0/0 timeout=42903/43200
dec: spi=03e01a2a esp=aes key=16 56e673f0df05186aa657f55cbb631c13
ah=sha1 key=20 b0d50597d9bed763c42469461b03da8041f87e88
enc: spi=2ead61bc esp=aes key=16 fe0ccd4a3ec19fe6d520c437eb6b8897
ah=sha1 key=20 e3e669bd6df41b88eadaacba66463706f26fb53a
dec:pkts/bytes=1/16368, enc:pkts/bytes=185/22360
npu_flag=03 npu_rgwy=11.1.1.11 npu_lgwy=12.1.1.2 npu_selid=0 dec_npuid=1 enc_npuid=1
------------------------------------------------------
name=spoke1-2-phase1 ver=1 serial=6 112.1.1.2:0->11.1.2.11:0 dst_mtu=15324
FortiOS 6.4.2 Administration Guide 621
Fortinet Inc.
SD-WAN
bound_if=90 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/536 options[0218]=npu create_dev
frag-rfc accept_traffic=1
proxyid_num=1 child_num=0 refcnt=21 ilast=0 olast=0 ad=r/2
stat: rxp=1 txp=186 rxb=16498 txb=11163
dpd: mode=on-demand on=1 idle=20000ms retry=3 count=0 seqno=74
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=spoke1-2 proto=0 sa=1 ref=4 serial=1 auto-negotiate adr
src: 0:0.0.0.0/0.0.0.0:0
dst: 0:0.0.0.0/0.0.0.0:0
SA: ref=6 options=1a227 type=00 soft=0 mtu=15262 expire=42818/0B replaywin=2048
seqno=bb esn=0 replaywin_lastseq=00000002 itn=0 qat=0
life: type=01 bytes=0/0 timeout=42901/43200
dec: spi=03e01a2b esp=aes key=16 fe49f5042a5ad236250bf53312db1346
ah=sha1 key=20 5dbb15c8cbc046c284bb1c6425dac2b3e15bec85
enc: spi=2ead61bd esp=aes key=16 d6d97be52c3cccb9e88f28a9db64ac46
ah=sha1 key=20 e20916ae6ea2295c2fbd5cbc8b8f5dd8b17f52f1
dec:pkts/bytes=1/16438, enc:pkts/bytes=186/22480
npu_flag=03 npu_rgwy=11.1.2.11 npu_lgwy=112.1.1.2 npu_selid=1 dec_npuid=1 enc_npuid=1
# diagnose sys sdwan service
Service(1): Address Mode(IPV4) flags=0x0
TOS(0x0/0x0), Protocol(0: 1->65535), Mode(sla)
Member sub interface:
Members:
1: Seq_num(1), alive, sla(0x1), cfg_order(0), cost(0), selected
2: Seq_num(2), alive, sla(0x1), cfg_order(1), cost(0), selected
Dst address: 33.1.1.1-33.1.1.100
Service(2): Address Mode(IPV4) flags=0x0
TOS(0x0/0x0), Protocol(0: 1->65535), Mode(manual)
Member sub interface:
Members:
1: Seq_num(2), alive, selected
Dst address: 33.1.1.101-33.1.1.200
# diagnose firewall proute list
list route policy info(vf=vd2):
id=2132869121 vwl_service=1 vwl_mbr_seq=1 dscp_tag=0xff 0xff flags=0x0 tos=0x00 tos_
mask=0x00 protocol=0 sport=0:65535 iif=0 dport=1-65535 oif=70 oif=71
destination(1): 33.1.1.1-33.1.1.100
source wildcard(1): 0.0.0.0/0.0.0.0
id=2132869122 vwl_service=2 vwl_mbr_seq=2 dscp_tag=0xff 0xff flags=0x0 tos=0x00 tos_
mask=0x00 protocol=0 sport=0:65535 iif=0 dport=1-65535 oif=71
destination(1): 33.1.1.101-33.1.1.200
source wildcard(1): 0.0.0.0/0.0.0.0
After spoke vs spoke shortcut VPN is established
Use the following CLI commands to check status after spoke vs spoke shortcut VPN is established.
# get router info routing-table bgp
Routing table for VRF=0
FortiOS 6.4.2 Administration Guide 622
Fortinet Inc.
SD-WAN
B* 0.0.0.0/0 [200/0] via 10.10.200.254, spoke1-2-phase1, 00:01:33
[200/0] via 10.10.100.254, spoke1-phase1, 00:01:33
B 1.1.1.1/32 [200/0] via 11.1.1.1 (recursive via 12.1.1.1), 00:02:04
[200/0] via 11.1.1.1 (recursive via 12.1.1.1), 00:02:04
B 11.11.11.0/24 [200/0] via 10.10.200.254, spoke1-2-phase1, 00:02:04
[200/0] via 10.10.100.254, spoke1-phase1, 00:02:04
B 33.1.1.0/24 [200/0] via 10.10.200.3, spoke1-2-phase1_0, 00:01:33
[200/0] via 10.10.100.3, spoke1-phase1_0, 00:01:33
[200/0] via 10.10.200.3, spoke1-2-phase1_0, 00:01:33
[200/0] via 10.10.100.3, spoke1-phase1_0, 00:01:33
# diagnose sys sdwan service
Service(1): Address Mode(IPV4) flags=0x0
TOS(0x0/0x0), Protocol(0: 1->65535), Mode(sla)
Member sub interface:
1: seq_num(1), interface(spoke1-phase1):
1: spoke1-phase1_0(111)
2: seq_num(2), interface(spoke1-2-phase1):
1: spoke1-2-phase1_0(113)
Members:
1: Seq_num(1), alive, sla(0x1), cfg_order(0), cost(0), selected
2: Seq_num(2), alive, sla(0x1), cfg_order(1), cost(0), selected
Dst address: 33.1.1.1-33.1.1.100
Service(2): Address Mode(IPV4) flags=0x0
TOS(0x0/0x0), Protocol(0: 1->65535), Mode(manual)
Member sub interface:
1: seq_num(2), interface(spoke1-2-phase1):
1: spoke1-2-phase1_0(113)
Members:
1: Seq_num(2), alive, selected
Dst address: 33.1.1.101-33.1.1.200
# diagnose vpn tunnel list
list all ipsec tunnel in vd 3
------------------------------------------------------
name=spoke1-phase1 ver=1 serial=5 12.1.1.2:0->11.1.1.11:0 dst_mtu=15324
bound_if=48 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/536 options[0218]=npu create_dev
frag-rfc accept_traffic=1
proxyid_num=1 child_num=1 refcnt=20 ilast=0 olast=0 ad=r/2
stat: rxp=1 txp=759 rxb=16428 txb=48627
dpd: mode=on-demand on=1 idle=20000ms retry=3 count=0 seqno=4
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=vd2-1 proto=0 sa=1 ref=5 serial=1 auto-negotiate adr
src: 0:0.0.0.0/0.0.0.0:0
dst: 0:0.0.0.0/0.0.0.0:0
SA: ref=6 options=1a227 type=00 soft=0 mtu=15262 expire=42536/0B replaywin=2048
seqno=2f8 esn=0 replaywin_lastseq=00000002 itn=0 qat=0
life: type=01 bytes=0/0 timeout=42898/43200
dec: spi=03e01a42 esp=aes key=16 1f131bda108d33909d49fc2778bd08bb
ah=sha1 key=20 14131d3f0da9b741a2fd13d530b0553aa1f58983
enc: spi=2ead61d8 esp=aes key=16 81ed24d5cd7bb59f4a80dceb5a560e1f
ah=sha1 key=20 d2ccc2f3223ce16514e75f672cd88c4b4f48b681
dec:pkts/bytes=1/16360, enc:pkts/bytes=759/94434
npu_flag=03 npu_rgwy=11.1.1.11 npu_lgwy=12.1.1.2 npu_selid=0 dec_npuid=1 enc_npuid=1
FortiOS 6.4.2 Administration Guide 623
Fortinet Inc.
SD-WAN
------------------------------------------------------
name=spoke1-2-phase1 ver=1 serial=6 112.1.1.2:0->11.1.2.11:0 dst_mtu=15324
bound_if=90 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/536 options[0218]=npu create_dev
frag-rfc accept_traffic=1
proxyid_num=1 child_num=1 refcnt=19 ilast=0 olast=0 ad=r/2
stat: rxp=1 txp=756 rxb=16450 txb=48460
dpd: mode=on-demand on=1 idle=20000ms retry=3 count=0 seqno=74
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=vd2-2 proto=0 sa=1 ref=5 serial=1 auto-negotiate adr
src: 0:0.0.0.0/0.0.0.0:0
dst: 0:0.0.0.0/0.0.0.0:0
SA: ref=6 options=1a227 type=00 soft=0 mtu=15262 expire=42538/0B replaywin=2048
seqno=2f5 esn=0 replaywin_lastseq=00000002 itn=0 qat=0
life: type=01 bytes=0/0 timeout=42900/43200
dec: spi=03e01a43 esp=aes key=16 7fc87561369f88b56d08bfda769eb45b
ah=sha1 key=20 0ed554ef231c5ac16dc2e71d1907d7347dda33d6
enc: spi=2ead61d9 esp=aes key=16 00286687aa1762e7d8216881d6720ef3
ah=sha1 key=20 59d5eec6299ebcf038c190860774e2833074d7c3
dec:pkts/bytes=1/16382, enc:pkts/bytes=756/94058
npu_flag=03 npu_rgwy=11.1.2.11 npu_lgwy=112.1.1.2 npu_selid=1 dec_npuid=1 enc_npuid=1
------------------------------------------------------
name=spoke1-phase1_0 ver=1 serial=55 12.1.1.2:0->13.1.1.3:0 dst_mtu=15324
bound_if=48 lgwy=static/1 tun=intf/0 mode=dial_inst/3 encap=none/728 options[02d8]=npu
create_dev no-sysctl rgwy-chg frag-rfc accept_traffic=1
parent=vd2-1 index=0
proxyid_num=1 child_num=0 refcnt=18 ilast=8 olast=8 ad=r/2
stat: rxp=0 txp=0 rxb=0 txb=0
dpd: mode=on-demand on=1 idle=20000ms retry=3 count=0 seqno=0
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=vd2-1 proto=0 sa=1 ref=2 serial=1 auto-negotiate adr
src: 0:0.0.0.0/0.0.0.0:0
dst: 0:0.0.0.0/0.0.0.0:0
SA: ref=3 options=1a227 type=00 soft=0 mtu=15262 expire=42893/0B replaywin=2048
seqno=1 esn=0 replaywin_lastseq=00000000 itn=0 qat=0
life: type=01 bytes=0/0 timeout=42901/43200
dec: spi=03e01a44 esp=aes key=16 c3b77a98e3002220e2373b73af14df6e
ah=sha1 key=20 d18d107c248564933874f60999d6082fd7a78948
enc: spi=864f6dba esp=aes key=16 eb6181806ccb9bac37931f9eadd4d5eb
ah=sha1 key=20 ab788f7a372877a5603c4ede1be89a592fc21873
dec:pkts/bytes=0/0, enc:pkts/bytes=0/0
npu_flag=00 npu_rgwy=13.1.1.3 npu_lgwy=12.1.1.2 npu_selid=51 dec_npuid=0 enc_npuid=0
------------------------------------------------------
name=spoke1-2-phase1_0 ver=1 serial=57 112.1.1.2:0->113.1.1.3:0 dst_mtu=15324
bound_if=90 lgwy=static/1 tun=intf/0 mode=dial_inst/3 encap=none/728 options[02d8]=npu
create_dev no-sysctl rgwy-chg frag-rfc accept_traffic=1
parent=vd2-2 index=0
proxyid_num=1 child_num=0 refcnt=17 ilast=5 olast=5 ad=r/2
stat: rxp=0 txp=0 rxb=0 txb=0
dpd: mode=on-demand on=1 idle=20000ms retry=3 count=0 seqno=0
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=vd2-2 proto=0 sa=1 ref=3 serial=1 auto-negotiate adr
src: 0:0.0.0.0/0.0.0.0:0
dst: 0:0.0.0.0/0.0.0.0:0
FortiOS 6.4.2 Administration Guide 624
Fortinet Inc.
SD-WAN
SA: ref=3 options=1a227 type=00 soft=0 mtu=15262 expire=42900/0B replaywin=2048
seqno=1 esn=0 replaywin_lastseq=00000000 itn=0 qat=0
life: type=01 bytes=0/0 timeout=42901/43200
dec: spi=03e01a45 esp=aes key=16 0beb519ed9f800e8b4c0aa4e1df7da35
ah=sha1 key=20 bc9f38db5296cce4208a69f1cc8a9f7ef4803c37
enc: spi=864f6dbb esp=aes key=16 1d26e3556afcdb9f8e3e33b563b44228
ah=sha1 key=20 564d05ef6f7437e1fd0a88d5fee7b6567f9d387e
dec:pkts/bytes=0/0, enc:pkts/bytes=0/0
npu_flag=00 npu_rgwy=113.1.1.3 npu_lgwy=112.1.1.2 npu_selid=53 dec_npuid=0 enc_npuid=0
# diagnose firewall proute list
list route policy info(vf=vd2):
id=2132869121 vwl_service=1 vwl_mbr_seq=1 dscp_tag=0xff 0xff flags=0x0 tos=0x00 tos_
mask=0x00 protocol=0 sport=0:65535 iif=0 dport=1-65535 oif=111 oif=70 oif=113 oif=71
destination(1): 33.1.1.1-33.1.1.100
source wildcard(1): 0.0.0.0/0.0.0.0
id=2132869122 vwl_service=2 vwl_mbr_seq=2 dscp_tag=0xff 0xff flags=0x0 tos=0x00 tos_
mask=0x00 protocol=0 sport=0:65535 iif=0 dport=1-65535 oif=113 oif=71
destination(1): 33.1.1.101-33.1.1.200
source wildcard(1): 0.0.0.0/0.0.0.0
SD-WAN monitor on ADVPN shortcuts
SD-WAN monitors ADVPN shortcut link quality by dynamically creating link monitors for each ADVPN link. The dynamic
link monitor on the spoke will use ICMP probes and the IP address of the gateway as the monitored server. These ICMP
probes will not be counted as actual user traffic that keeps the spoke-to-spoke tunnel alive.
l When no shortcut is established:
# diagnose sys sdwan health-check
Health Check(ping):
Seq(1 tunnel-1): state(alive), packet-loss(0.000%) latency(0.038), jitter(0.006) sla_
map=0x3
Seq(2 tunnel-2): state(alive), packet-loss(0.000%) latency(0.035), jitter(0.004) sla_
map=0x3
FortiOS 6.4.2 Administration Guide 625
Fortinet Inc.
SD-WAN
l When one shortcut is established:
# diagnose sys sdwan health-check
Health Check(ping):
Seq(1 tunnel-1): state(alive), packet-loss(0.000%) latency(0.039), jitter(0.003) sla_
map=0x3
Seq(1 tunnel-1_0): state(alive), packet-loss(0.000%) latency(0.060), jitter(0.023) sla_
map=0x3
Seq(2 tunnel-2): state(alive), packet-loss(0.000%) latency(0.035), jitter(0.002) sla_
map=0x3
l When more than one shortcut is established:
# diagnose sys sdwan health-check
Health Check(ping):
Seq(1 tunnel-1): state(alive), packet-loss(0.000%) latency(0.036), jitter(0.004) sla_
map=0x3
Seq(1 tunnel-1_0): state(alive), packet-loss(0.000%) latency(0.041), jitter(0.009) sla_
map=0x3
Seq(2 tunnel-2): state(alive), packet-loss(0.000%) latency(0.030), jitter(0.005) sla_
map=0x3
Seq(2 tunnel-2_0): state(alive), packet-loss(0.000%) latency(0.031), jitter(0.004) sla_
map=0x3
SD-WAN integration with OCVPN
OCVPN has the capability to enable SD-WAN in order to dynamically add its tunnel interfaces as SD-WAN members.
Users can configure SD-WAN health checks and service rules to direct traffic over the OCVPN tunnels.
The following example uses a dual hub and spoke topology. Each hub and spoke has two WAN link connections to the
ISP. The spokes generate two IPsec tunnels to each hub (four tunnels in total). BGP neighbors are established over
each tunnel and routes from the hubs and other spokes learned from all neighbors, which forms an ECMP scenario. All
tunnels are placed as SD-WAN members, so traffic can be distributed across tunnels based on the configured SD-WAN
service rules.
FortiOS 6.4.2 Administration Guide 626
Fortinet Inc.
SD-WAN
To integrate SD-WAN with OCVPN in the GUI:
1. Configure the primary hub:
a. Go to VPN > Overlay Controller VPN and set the Status to Enable.
b. For Role, select Primary Hub.
c. Enter the WAN interfaces (port15 and port16) and tunnel IP allocation block (10.254.0.0/16).
The WAN interface is position sensitive, meaning a tunnel will be created with the first
position interface on the hub to the first position interface on the spoke, and so on. In
this example, FGT_A (primary hub) will create two tunnels with FGT_C (spoke):
l FGT_A port15 <==> FGT_C internal1
l FGT_A port16 <==> FGT_C internal2
d. Enable Auto-discovery shortcuts.
e. Enable Add OCVPN tunnels to SD-WAN. The IPsec tunnels will be added automatically to the SD-WAN
members if SD-WAN is enabled.
2. Configure the overlays on the primary hub:
a. In the Overlays section, click Create New.
b. Enter a name and add the local interface (port2). Note the overlay is either based on local subnets or local
interfaces, but not both.
By default, inter-overlay traffic is not enabled. Toggle Allow traffic from other overlays to enable it.
c. Click OK and repeat these steps to create the second overlay (loop1).
d. Click Apply.
3. Configure the secondary hub with the same settings as the primary hub.
4. Configure the spoke:
a. Go to VPN > Overlay Controller VPN and set the Status to Enable.
b. For Role, select Spoke.
c. Enter the WAN interfaces (internal1 and internal2).
d. Enable Auto-discovery shortcuts.
e. Enable Add OCVPN tunnels to SD-WAN. The IPsec tunnels will be added automatically to the SD-WAN
members if SD-WAN is enabled.
FortiOS 6.4.2 Administration Guide 627
Fortinet Inc.
SD-WAN
f. Configure the overlays.
The overlay names on the spokes must match the hub for the traffic to be allowed
through the same overlay.
g. Click Apply.
5. Configure the other spoke with the same settings.
6. On a spoke, go to Network > SD-WAN Zones to view the configuration generated by OCVPN.
Firewall policies will be automatically generated by OCVPN between the local interfaces and the SD-WAN interface.
Each policy will define the proper local and remote networks for its source and destination addresses.
To integrate SD-WAN with OCVPN in the CLI:
1. Configure the primary hub:
config vpn ocvpn
set role primary-hub
set sdwan enable
set wan-interface "port15" "port16"
set ip-allocation-block 10.254.0.0 255.255.0.0
config overlays
edit "overlay1"
config subnets
edit 1
set type interface
set interface "port2"
next
end
next
edit "overlay2"
config subnets
FortiOS 6.4.2 Administration Guide 628
Fortinet Inc.
SD-WAN
edit 1
set type interface
set interface "loop1"
next
end
next
end
end
2. Configure the secondary hub with the same settings as the primary hub.
3. Configure the spoke:
config vpn ocvpn
set status enable
set sdwan enable
set wan-interface "internal1" "internal2"
config overlays
edit "overlay1"
config subnets
edit 1
set type interface
set interface "wan2"
next
end
next
edit "overlay2"
config subnets
edit 1
set type interface
set interface "loop1"
next
end
next
end
end
4. Configure the other spoke with the same settings.
5. Configure SD-WAN:
config system sdwan
set status enable
config members
edit 1
set interface "_OCVPN2-0a"
next
edit 2
set interface "_OCVPN2-0b"
next
edit 3
set interface "_OCVPN2-1a"
next
edit 4
set interface "_OCVPN2-1b"
next
end
end
FortiOS 6.4.2 Administration Guide 629
Fortinet Inc.
SD-WAN
Firewall policies will be automatically generated by OCVPN between the local interfaces and the SD-WAN interface.
Each policy will define the proper local and remote networks for its source and destination addresses.
If no SD-WAN zone is specified, members are added to the default virtual-wan-link zone.
To verify the integration is working after the ADVPN shortcut is triggered:
1. Check the routing table on the spoke:
FGT_C # get router info routing-table all
Codes: K - kernel, C - connected, S - static, R - RIP, B - BGP
O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default
Routing table for VRF=0
S* 0.0.0.0/0 [10/0] via 172.16.17.2, internal1
[10/0] via 172.16.18.2, internal2
B 10.1.100.0/24 [200/0] via 10.254.7.254, _OCVPN2-0a, 00:10:24
[200/0] via 10.254.15.254, _OCVPN2-0b, 00:10:24
B 10.1.200.0/24 [200/0] via 10.254.7.254, _OCVPN2-0a, 00:10:24
[200/0] via 10.254.15.254, _OCVPN2-0b, 00:10:24
B 10.2.100.0/24 [200/0] via 10.254.71.254, _OCVPN2-1a, 00:10:15
[200/0] via 10.254.79.254, _OCVPN2-1b, 00:10:15
B 10.2.200.0/24 [200/0] via 10.254.71.254, _OCVPN2-1a, 00:10:15
[200/0] via 10.254.79.254, _OCVPN2-1b, 00:10:15
B 10.254.0.0/16 [200/0] via 10.254.7.254, _OCVPN2-0a, 00:10:15
[200/0] via 10.254.15.254, _OCVPN2-0b, 00:10:15
[200/0] via 10.254.71.254, _OCVPN2-1a, 00:10:15
[200/0] via 10.254.79.254, _OCVPN2-1b, 00:10:15
C 10.254.0.0/21 is directly connected, _OCVPN2-0a
C 10.254.0.1/32 is directly connected, _OCVPN2-0a
C 10.254.8.0/21 is directly connected, _OCVPN2-0b
C 10.254.8.1/32 is directly connected, _OCVPN2-0b
C 10.254.64.0/21 is directly connected, _OCVPN2-1a
C 10.254.64.1/32 is directly connected, _OCVPN2-1b_0 <==shortcut tunnel
C 10.254.64.2/32 is directly connected, _OCVPN2-1a
C 10.254.72.0/21 is directly connected, _OCVPN2-1b
C 10.254.72.2/32 is directly connected, _OCVPN2-1b
is directly connected, _OCVPN2-1b_0
C 172.16.17.0/24 is directly connected, internal1
C 172.16.18.0/24 is directly connected, internal2
C 172.16.200.0/24 is directly connected, wan1
C 192.168.1.0/24 is directly connected, internal
C 192.168.4.0/24 is directly connected, wan2
B 192.168.5.0/24 [200/0] via 10.254.0.2, _OCVPN2-0a, 00:00:10
[200/0] via 10.254.8.2, _OCVPN2-0b, 00:00:10
[200/0] via 10.254.0.2, _OCVPN2-0a, 00:00:10
[200/0] via 10.254.8.2, _OCVPN2-0b, 00:00:10
[200/0] via 10.254.64.1, _OCVPN2-1b_0, 00:00:10
[200/0] via 10.254.72.1, _OCVPN2-1b, 00:00:10
FortiOS 6.4.2 Administration Guide 630
Fortinet Inc.
SD-WAN
[200/0] via 10.254.64.1, _OCVPN2-1b_0, 00:00:10
[200/0] via 10.254.72.1, _OCVPN2-1b, 00:00:10
C 192.168.44.0/24 is directly connected, loop1
B 192.168.55.0/24 [200/0] via 10.254.0.2, _OCVPN2-0a, 00:00:10
[200/0] via 10.254.8.2, _OCVPN2-0b, 00:00:10
[200/0] via 10.254.0.2, _OCVPN2-0a, 00:00:10
[200/0] via 10.254.8.2, _OCVPN2-0b, 00:00:10
[200/0] via 10.254.64.1, _OCVPN2-1b_0, 00:00:10
[200/0] via 10.254.72.1, _OCVPN2-1b, 00:00:10
[200/0] via 10.254.64.1, _OCVPN2-1b_0, 00:00:10
[200/0] via 10.254.72.1, _OCVPN2-1b, 00:00:10
2. Check the VPN tunnel state:
FGT_C # diagnose vpn tunnel list
list all ipsec tunnel in vd 0
------------------------------------------------------
name=_OCVPN2-1b_0 ver=2 serial=1c 172.16.18.3:0->172.16.15.4:0 dst_mtu=1500
bound_if=9 lgwy=static/1 tun=intf/0 mode=dial_inst/3 encap=none/728 options[02d8]=npu
create_dev no-sysctl rgwy-chg frag-rfc accept_traffic=1 overlay_id=4
parent=_OCVPN2-1b index=0
proxyid_num=1 child_num=0 refcnt=15 ilast=0 olast=0 ad=r/2
stat: rxp=641 txp=1025 rxb=16436 txb=16446
dpd: mode=on-idle on=1 idle=20000ms retry=3 count=0 seqno=0
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=_OCVPN2-1b proto=0 sa=1 ref=3 serial=1 auto-negotiate adr
src: 0:0.0.0.0/0.0.0.0:0
dst: 0:0.0.0.0/0.0.0.0:0
SA: ref=6 options=1a227 type=00 soft=0 mtu=1438 expire=42650/0B replaywin=1024
seqno=407 esn=0 replaywin_lastseq=00000280 itn=0 qat=0 hash_search_len=1
life: type=01 bytes=0/0 timeout=43186/43200
dec: spi=90f03d9d esp=aes key=16 6cb33685bbc67d5c85488e0176ecf7b0
ah=sha1 key=20 7d11b3babe62c840bf444b7b1f637b4324722a71
enc: spi=7bc94bda esp=aes key=16 b4d8fc731d411eb24448b4077a5872ca
ah=sha1 key=20 b724064d827304a6d80385ed4914461108b7312f
dec:pkts/bytes=641/16368, enc:pkts/bytes=2053/123426
npu_flag=03 npu_rgwy=172.16.15.4 npu_lgwy=172.16.18.3 npu_selid=1f dec_npuid=1 enc_
npuid=1
------------------------------------------------------
name=_OCVPN2-0a ver=2 serial=18 172.16.17.3:0->172.16.13.1:0 dst_mtu=1500
bound_if=8 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/536 options[0218]=npu create_
dev frag-rfc accept_traffic=1 overlay_id=1
proxyid_num=1 child_num=0 refcnt=20 ilast=0 olast=0 ad=r/2
stat: rxp=1665 txp=2922 rxb=278598 txb=70241
dpd: mode=on-idle on=1 idle=20000ms retry=3 count=0 seqno=7
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=_OCVPN2-0a proto=0 sa=1 ref=4 serial=1 auto-negotiate adr
src: 0:0.0.0.0/0.0.0.0:0
dst: 0:0.0.0.0/0.0.0.0:0
SA: ref=6 options=1a227 type=00 soft=0 mtu=1438 expire=41599/0B replaywin=1024
seqno=890 esn=0 replaywin_lastseq=00000680 itn=0 qat=0 hash_search_len=1
life: type=01 bytes=0/0 timeout=42899/43200
dec: spi=90f03d95 esp=aes key=16 a6ffcc197bb1b46ec745d0b595cdd69a
ah=sha1 key=20 8007c134e41edf282f95daf9c9033d688ef05ccc
FortiOS 6.4.2 Administration Guide 631
Fortinet Inc.
SD-WAN
enc: spi=a1bf21bf esp=aes key=16 ead05be389b0dec222f969e2f9c46b1d
ah=sha1 key=20 b04105d34d4b0e61b018f2e60591f9b1510783bb
dec:pkts/bytes=1665/278538, enc:pkts/bytes=4237/265074
npu_flag=03 npu_rgwy=172.16.13.1 npu_lgwy=172.16.17.3 npu_selid=1b dec_npuid=1 enc_
npuid=1
------------------------------------------------------
name=_OCVPN2-1a ver=2 serial=1a 172.16.17.3:0->172.16.11.1:0 dst_mtu=1500
bound_if=8 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/536 options[0218]=npu create_
dev frag-rfc accept_traffic=1 overlay_id=3
proxyid_num=1 child_num=0 refcnt=17 ilast=0 olast=0 ad=r/2
stat: rxp=1 txp=2913 rxb=16376 txb=69642
dpd: mode=on-idle on=1 idle=20000ms retry=3 count=0 seqno=5
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=_OCVPN2-1a proto=0 sa=1 ref=28 serial=1 auto-negotiate adr
src: 0:0.0.0.0/0.0.0.0:0
dst: 0:0.0.0.0/0.0.0.0:0
SA: ref=6 options=1a227 type=00 soft=0 mtu=1438 expire=41653/0B replaywin=1024
seqno=887 esn=0 replaywin_lastseq=00000002 itn=0 qat=0 hash_search_len=1
life: type=01 bytes=0/0 timeout=42900/43200
dec: spi=90f03d9b esp=aes key=16 ee03f5b0f617a26c6177e91d60abf90b
ah=sha1 key=20 f60cbbc4ebbd6d0327d23137da707b7ab2dc49e6
enc: spi=a543a7d3 esp=aes key=16 1d37efab13a5c0347b582b2198b15cb8
ah=sha1 key=20 427ee4c82bac6f26f0bcabfe04328c7f57ce682e
dec:pkts/bytes=1/16316, enc:pkts/bytes=4229/264036
npu_flag=03 npu_rgwy=172.16.11.1 npu_lgwy=172.16.17.3 npu_selid=1d dec_npuid=1 enc_
npuid=1
------------------------------------------------------
name=_OCVPN2-0b ver=2 serial=19 172.16.18.3:0->172.16.14.1:0 dst_mtu=1500
bound_if=9 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/536 options[0218]=npu create_
dev frag-rfc accept_traffic=1 overlay_id=2
proxyid_num=1 child_num=0 refcnt=20 ilast=0 olast=0 ad=r/2
stat: rxp=1665 txp=2917 rxb=278576 txb=69755
dpd: mode=on-idle on=1 idle=20000ms retry=3 count=0 seqno=7
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=_OCVPN2-0b proto=0 sa=1 ref=4 serial=1 auto-negotiate adr
src: 0:0.0.0.0/0.0.0.0:0
dst: 0:0.0.0.0/0.0.0.0:0
SA: ref=6 options=1a227 type=00 soft=0 mtu=1438 expire=41599/0B replaywin=1024
seqno=88b esn=0 replaywin_lastseq=00000680 itn=0 qat=0 hash_search_len=1
life: type=01 bytes=0/0 timeout=42899/43200
dec: spi=90f03d96 esp=aes key=16 9d7eb233c1d095b30796c3711d53f2fd
ah=sha1 key=20 d8feacd42b5e0ba8b5e38647b2f2734c94644bd1
enc: spi=a1bf21c0 esp=aes key=16 d2c0984bf86dc504c5475230b24034f0
ah=sha1 key=20 3946e4033e1f42b0d9a843b94448f56fd5b57bee
dec:pkts/bytes=1665/278516, enc:pkts/bytes=4233/264411
npu_flag=03 npu_rgwy=172.16.14.1 npu_lgwy=172.16.18.3 npu_selid=1c dec_npuid=1 enc_
npuid=1
------------------------------------------------------
name=_OCVPN2-1b ver=2 serial=1b 172.16.18.3:0->172.16.12.1:0 dst_mtu=1500
bound_if=9 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/536 options[0218]=npu create_
dev frag-rfc accept_traffic=1 overlay_id=4
proxyid_num=1 child_num=1 refcnt=19 ilast=1 olast=0 ad=r/2
stat: rxp=1 txp=2922 rxb=16430 txb=70173
FortiOS 6.4.2 Administration Guide 632
Fortinet Inc.
SD-WAN
dpd: mode=on-idle on=1 idle=20000ms retry=3 count=0 seqno=4
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=_OCVPN2-1b proto=0 sa=1 ref=28 serial=1 auto-negotiate adr
src: 0:0.0.0.0/0.0.0.0:0
dst: 0:0.0.0.0/0.0.0.0:0
SA: ref=6 options=1a227 type=00 soft=0 mtu=1438 expire=41656/0B replaywin=1024
seqno=890 esn=0 replaywin_lastseq=00000002 itn=0 qat=0 hash_search_len=1
life: type=01 bytes=0/0 timeout=42903/43200
dec: spi=90f03d9c esp=aes key=16 a655767c1ed6cff4575857eb3981ad81
ah=sha1 key=20 bfc2bccd7103a201be2641d4c6147d437d2c3f70
enc: spi=a543a7d4 esp=aes key=16 7221b814e483165b01edfdc8260d261a
ah=sha1 key=20 d54819643c2f1b20da2aea4282d50a1f1bc1d72a
dec:pkts/bytes=1/16370, enc:pkts/bytes=4238/265164
npu_flag=03 npu_rgwy=172.16.12.1 npu_lgwy=172.16.18.3 npu_selid=1e dec_npuid=1 enc_
npuid=1
3. Check the SD-WAN state:
FGT_C # diagnose sys sdwan health-check
Health Check(Default_DNS):
Health Check(Default_Office_365):
Health Check(Default_Gmail):
Health Check(Default_AWS):
Health Check(Default_Google Search):
Health Check(Default_FortiGuard):
Health Check(ocvpn):
Seq(1 _OCVPN2-0a): state(alive), packet-loss(0.000%) latency(0.364), jitter(0.028) sla_
map=0x0
Seq(2 _OCVPN2-0b): state(alive), packet-loss(0.000%) latency(0.287), jitter(0.026) sla_
map=0x0
Seq(3 _OCVPN2-1a): state(dead), packet-loss(100.000%) sla_map=0x0
Seq(4 _OCVPN2-1b): state(dead), packet-loss(100.000%) sla_map=0x0
Seq(4 _OCVPN2-1b_0): state(alive), packet-loss(0.000%) latency(0.289), jitter(0.029)
sla_map=0x0
Forward error correction on VPN overlay networks
This topic shows an SD-WAN with forward error correction (FEC) on VPN overlay networks. FEC is a technique used to
control and correct errors in data transmission by sending redundant data across the VPN. It uses six parameters in
IPsec phase1/phase1-interface settings:
fec-ingress Enable/disable Forward Error Correction for ingress IPsec traffic (default = disable).
fec-egress Enable/disable Forward Error Correction for egress IPsec traffic (default = disable).
fec-base The number of base Forward Error Correction packets (1 - 100, default = 20).
fec-redundant The number of redundant Forward Error Correction packets (1 - 100, default = 10).
fec-send-timeout The time before sending Forward Error Correction packets, in milliseconds (1 - 1000, default =
8).
fec-receive- The time before dropping Forward Error Correction packets, in milliseconds (1 - 1000, default
timeout = 5000).
For every fec-base number of sent packets, the tunnel will send fec-redundant number of redundant packets.
FortiOS 6.4.2 Administration Guide 633
Fortinet Inc.
SD-WAN
If your FortiGate is NPU capable, disable npu-offload in your phase1 configurations:
config vpn ipsec phase1-interface
edit <name>
set npu-offload disable
next
end
Example
For example, a customer has two ISP connections, wan1 and wan2. Using these two connections, create two IPsec VPN
interfaces as SD-WAN members. Configure FEC on each VPN interface to lower packet loss ratio by re-transmitting the
packets using its backend algorithm.
To configure IPsec VPN:
config vpn ipsec phase1-interface
edit "vd1-p1"
set interface "wan1"
set peertype any
set net-device disable
set proposal aes256-sha256
set dhgrp 14
set remote-gw 172.16.201.2
set psksecret ftnt1234
set fec-egress enable
set fec-send-timeout 8
set fec-base 20
set fec-redundant 10
set fec-ingress enable
set fec-receive-timeout 5000
next
edit "vd1-p2"
set interface "wan2"
set peertype any
FortiOS 6.4.2 Administration Guide 634
Fortinet Inc.
SD-WAN
set net-device disable
set proposal aes256-sha256
set dhgrp 14
set remote-gw 172.16.202.2
set psksecret ftnt1234
set fec-egress enable
set fec-send-timeout 8
set fec-base 20
set fec-redundant 10
set fec-ingress enable
set fec-receive-timeout 5000
next
end
config vpn ipsec phase2-interface
edit "vd1-p1"
set phase1name "vd1-p1"
next
edit "vd1-p2"
set phase1name "vd1-p2"
next
end
To configure the interface:
config system interface
edit "vd1-p1"
set ip 172.16.211.1 255.255.255.255
set remote-ip 172.16.211.2 255.255.255.255
next
edit "vd1-p2"
set ip 172.16.212.1 255.255.255.255
set remote-ip 172.16.212.2 255.255.255.255
next
end
To configure the firewall policy:
config firewall policy
edit 1
set name "1"
set srcintf "dmz"
set dstintf ""virtual-wan-link""
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set nat enable
next
end
To configure SD-WAN:
config system sdwan
set status enable
config members
FortiOS 6.4.2 Administration Guide 635
Fortinet Inc.
SD-WAN
edit 1
set interface "vd1-p1"
set gateway 172.16.211.2
next
edit 1
set interface "vd2-p2"
set gateway 172.16.212.2
next
end
end
If no SD-WAN zone is specified, members are added to the default virtual-wan-link zone.
To use the diagnose command to check VPN FEC status:
# diagnose vpn tunnel list
list all ipsec tunnel in vd 0
------------------------------------------------------
name=vd1 ver=1 serial=1 172.16.200.1:0->172.16.200.2:0
bound_if=11 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/3600 options[0e10]=create_dev
frag-rfc fec-egress fec-ingress accept_traffic=1
proxyid_num=1 child_num=0 refcnt=11 ilast=8 olast=8 ad=/0
stat: rxp=0 txp=0 rxb=0 txb=0
dpd: mode=on-demand on=1 idle=20000ms retry=3 count=0 seqno=0
natt: mode=none draft=0 interval=0 remote_port=0
fec-egress: base=20 redundant=10 remote_port=50000 <<<<<<<<<<<<<<<<<<<<<<
fec-ingress: base=20 redundant=10 <<<<<<<<<<<<<<<<<<<<<<
proxyid=demo proto=0 sa=1 ref=2 serial=1
src: 0:10.1.100.0/255.255.255.0:0
dst: 0:173.1.1.0/255.255.255.0:0
SA: ref=3 options=10226 type=00 soft=0 mtu=1390 expire=42897/0B replaywin=2048
seqno=1 esn=0 replaywin_lastseq=00000000 itn=0 qat=0
life: type=01 bytes=0/0 timeout=42899/43200
dec: spi=181f4f81 esp=aes key=16 6e8fedf2a77691ffdbf3270484cb2555
ah=sha1 key=20 f92bcf841239d15d30b36b695f78eaef3fad05c4
enc: spi=0ce10190 esp=aes key=16 2d684fb19cbae533249c8b5683937329
ah=sha1 key=20 ba7333f89cd34cf75966bd9ffa72030115919213
dec:pkts/bytes=0/0, enc:pkts/bytes=0/0
Dual VPN tunnel wizard
This wizard is used to automatically set up multiple VPN tunnels to the same destination over multiple outgoing
interfaces. This includes automatically configuring IPsec, routing, and firewall settings, avoiding cumbersome and error-
prone configuration steps.
FortiOS 6.4.2 Administration Guide 636
Fortinet Inc.
SD-WAN
To create a new SD-WAN VPN interface using the tunnel wizard:
1. Go to Network > SD-WAN Zones and click Create New > SD-WAN Member.
2. In the Interface drop-down, click +VPN. The Create IPsec VPN for SD-WAN members pane opens.
3. Enter the required information, then click Create.
4. Click Close to return to the SD-WAN page.
The newly created VPN interface will be highlighted in the Interface drop-down list.
5. Select the VPN interface to add it as an SD-WAN member, then click OK.
Duplicate packets on other zone members
When duplication rules are used, packets are duplicated on other good links within the SD-WAN zone and de-duplicated
on the destination FortiGate. Use force mode to force duplication on other links within the SD-WAN zone, or use on-
FortiOS 6.4.2 Administration Guide 637
Fortinet Inc.
SD-WAN
demand mode to trigger duplication only when SLA fails on the selected member.
The duplication rule is configured in the CLI by using the config duplication command. The following options can
be configured:
Parameter Description
srcaddr Source address or address group names.
dstaddr Destination address or address group names.
srcaddr6 Source IPv6 address or IPv6 address group names.
dstaddr6 Destination IPv6 address or IPv6 address group names.
srcintf Incoming (ingress) interfaces or zones.
dstintf Outgoing (egress) interfaces or zones.
service Service and service group names.
packet-duplication Configure packet duplication method.
l disable: Disable packet duplication (default).
l force: Duplicate packets across all interface members of the SD-WAN zone.
l on-demand: Duplicate packets across all interface members of the SD-WAN
zone based on the link quality.
packet-de-duplication Enable/disable discarding of packets that have been duplicated (default =
disable).
The duplication-max-num <integer> option under config system sdwan is the maximum number of
interface members that a packet is duplicated on in the SD-WAN zone (2 - 4, default = 2). If this value is set to 3, the
original packet plus two more copies are created. If there are three member interfaces in the SD-WAN zone and the
duplication-max-num is set to 2, the packet duplication follows the configuration order, so the packets are
duplicated on the second member.
Example
The packet duplication feature works best in a spoke-spoke or hub-and-spoke topology. In this example, a hub-and-
spoke ADVPN topology is used. Before shortcuts are established, Hub 1 forwards the duplicate packets from Spoke 1 to
Spoke 2. Once shortcuts are established, Hub 1 is transparent, and duplicate packets are exchanged directly between
the spokes.
FortiOS 6.4.2 Administration Guide 638
Fortinet Inc.
SD-WAN
To configure packet duplication between Spoke 1 and Spoke 2:
1. Configure Spoke 1:
config system sdwan
set status enable
config zone
edit "virtual-wan-link"
next
edit "sdwanzone_v4"
next
end
config members
edit 1
set interface "t1"
set zone "sdwanzone_v4"
next
edit 4
set interface "t21"
set zone "sdwanzone_v4"
next
edit 2
set interface "t2"
set zone "sdwanzone_v4"
next
end
config health-check
edit "h1"
set server "10.34.1.1"
set interval 1000
set failtime 10
set members 1 2
config sla
edit 1
set packetloss-threshold 40
next
end
FortiOS 6.4.2 Administration Guide 639
Fortinet Inc.
SD-WAN
next
end
config duplication
edit 1
set srcaddr "all"
set dstaddr "all"
set srcintf "port1"
set dstintf "sdwanzone_v4"
set service "ALL"
set packet-duplication force
set packet-de-duplication enable
next
end
end
2. Configure Spoke 2 with similar settings.
Advanced configuration
The following topics provide instructions on SD-WAN advanced configuration:
l SD-WAN with FGCP HA on page 640
l Configuring SD-WAN in an HA cluster using internal hardware switches on page 646
l SD-WAN configuration portability on page 650
See also Per packet distribution and tunnel aggregation on page 1301.
SD-WAN with FGCP HA
This example shows how to convert a standalone FortiGate SD-WAN solution to a FGCP HA cluster with full-mesh WAN
set up. This configuration allows you to load balance your internet traffic between multiple ISP links. It also provides
redundancy for your internet connection if your primary ISP in unavailable, or if one of the FortiGates in the HA cluster
fails.
This example assumes that a standalone FortiGate has already been configured for SD-WAN by following the SD-WAN
quick start on page 509.
Standalone FortiGate:
FortiOS 6.4.2 Administration Guide 640
Fortinet Inc.
SD-WAN
FGCP HA cluster:
The following devices are required to convert the topology to HA:
l A second FortiGate that is the same model running the same firmware version.
l Two switches for connecting each FortiGate's WAN interface to the corresponding ISP modem.
Before you begin:
l Ensure that the licenses and subscriptions on both HA members match.
l Ensure that there are one or more ports reserved for HA heartbeat.
l Ensure you have physical access to both HA members.
Enabling HA and re-cabling the WAN interfaces will cause network interruptions.
This procedure should be performed during a maintenance window.
Configuring the standalone FortiGate for HA
After running the following commands, the FortiGate negotiates to establish an HA cluster. You might temporarily lose
connectivity with the FortiGate as FGCP negotiations take place and the MAC addresses of the FortiGate interfaces are
changed to HA virtual MAC addresses.
This configurations sets the HA mode to active-passive.
The ha1 and ha2 interfaces are configured as the heartbeat interfaces, with priorities set to 200 and 100 respectively.
Setting different priorities for the heartbeat interfaces is a best practice, but is not required.
If you have more than one cluster on the same network, each cluster should have a different group ID. Changing the
group ID changes the cluster interface's virtual MAC addresses. If the group IP causes a MAC address conflict on your
network, select a different group ID.
Enabling override and increasing the device priority means that this FortiGate always becomes the primary unit.
FortiOS 6.4.2 Administration Guide 641
Fortinet Inc.
SD-WAN
To configure the standalone FortiGate for HA in the GUI:
1. Go to System > Settings and change the Host name so that the FortiGate can be easily identified as the primary
unit.
2. Go to System > HA and configure the following options:
Mode Active-Passive
Device priority 250
Group name My-cluster
Password <password>
Heartbeat interfaces ha1 and ha2
Heartbeat Interface Priority port2 (ha1): 200
port3 (ha2): 100
Override and the group ID can only be configured from the CLI.
3. Click OK.
Connectivity with the FortiGate will temporarily be lost.
To configure the standalone FortiGate for HA in the CLI:
1. Change the host name so that the FortiGate can be easily identified:
config system global
set hostname primary_FG
end
2. Configure HA:
config system ha
set mode a-p
set group-id 100
set group-name My-cluster
FortiOS 6.4.2 Administration Guide 642
Fortinet Inc.
SD-WAN
set password <password>
set priority 250
set override enable
set hbdev ha1 200 ha2 100
end
If HA mode does not start after running the above steps, ensure that none of the FortiGate's
interfaces use DHCP or PPPoE addressing.
Configuring the secondary FortiGate for HA
The secondary FortiGate must be the same model and running the same firmware version as the primary FortiGate. The
HA settings are the same as the for the primary unit, except the secondary device has a lower priority and override is not
enabled.
It is best practice to reset the FortiGate to factory default settings prior to configuring HA. This
reduces the chance of synchronization problems.
# execute factoryreset
This operation will reset the system to factory default!
Do you want to continue? (y/n) y
This is unnecessary if the device is new from the factory.
To configure the secondary FortiGate for HA in the GUI:
1. Go to System > Settings and change the Host name so that the FortiGate can be easily identified as the backup unit.
2. Go to System > HA and configure the options the same as for the primary FortiGate, except with a lower priority:
Mode Active-Passive
Device priority 128
Group name My-cluster
Password <password>
Heartbeat interfaces ha1 and ha2
Heartbeat Interface Priority port2 (ha1): 200
port3 (ha2): 100
3. Click OK.
To configure the secondary FortiGate for HA in the CLI:
1. Change the host name so that the secondary FortiGate can be easily identified:
config system global
set hostname secondary_FG
end
FortiOS 6.4.2 Administration Guide 643
Fortinet Inc.
SD-WAN
2. Configure HA:
config system ha
set mode a-p
set group-id 100
set group-name My-cluster
set password <password>
set priority 128
set hbdev ha1 200 ha2 100
end
Connecting the heartbeat interfaces between the FortiGates
To connect and check the heartbeat interfaces:
1. Connect the heartbeat interfaces ha1 and ha2 between the primary and secondary FortiGate.
a. An HA primary device is selected. Because the primary FortiGate has a higher priority and override enabled, it
assumes the role of HA primary.
b. The secondary FortiGate synchronizes its configuration from the primary device.
2. Verify that the checksums match between the primary and secondary FortiGates:
# diagnose sys ha checksum cluster
================== FG5H0XXXXXXXXXX0 ==================
is_manage_primary()=1, is_root_primary()=1
debugzone
global: 2b e9 81 38 c2 9d 4f db b7 0e 1f 49 42 c6 1e fb
root: af a6 48 c5 c2 9a 8b 81 a5 53 fb 27 e9 ae 01 6a
all: 89 1f 63 77 48 8a 30 ee 57 06 ca eb 71 e6 8e ad
checksum
global: 2b e9 81 38 c2 9d 4f db b7 0e 1f 49 42 c6 1e fb
root: af a6 48 c5 c2 9a 8b 81 a5 53 fb 27 e9 ae 01 6a
all: 89 1f 63 77 48 8a 30 ee 57 06 ca eb 71 e6 8e ad
================== FG5H0XXXXXXXXXX1 ==================
is_manage_primary()=0, is_root_primary()=0
debugzone
global: 2b e9 81 38 c2 9d 4f db b7 0e 1f 49 42 c6 1e fb
root: af a6 48 c5 c2 9a 8b 81 a5 53 fb 27 e9 ae 01 6a
all: 89 1f 63 77 48 8a 30 ee 57 06 ca eb 71 e6 8e ad
checksum
global: 2b e9 81 38 c2 9d 4f db b7 0e 1f 49 42 c6 1e fb
root: af a6 48 c5 c2 9a 8b 81 a5 53 fb 27 e9 ae 01 6a
all: 89 1f 63 77 48 8a 30 ee 57 06 ca eb 71 e6 8e ad
If all of the cluster members have identical checksums, then their configurations are synchronized. If the checksums
are not the same, wait for a few minutes, then repeat the command. Some parts of the configuration might take a
significant amount of time to synchronize (tens of minutes).
FortiOS 6.4.2 Administration Guide 644
Fortinet Inc.
SD-WAN
Connecting other traffic interfaces
After the device configurations are synchronized, you can connect the rest of the traffic interfaces. Making these
connections will disrupt traffic as cables are disconnected and reconnected.
Switches must be used between the cluster and the ISPs, and between the cluster and the internal network, as shown in
the topology diagram.
Checking cluster operations
The HA Status dashboard widget shows the synchronization status. Hover over the host names of each FortiGate in the
widget to verify that they are synchronized and have the same checksum.
To view more information about the cluster status, including the number of sessions passing through the cluster
members, go to System > HA.
See Check HA sync status on page 765 for more information.
Results
1. Browse the internet on a computer in the internal network.
2. Go to Network > SD-WAN Zones to see the bandwidth, volume, and sessions for traffic on the SD-WAN interfaces.
See Results on page 514 for details.
3. Go to Dashboard > Network, and expand the SD-WAN widget to see information about each interface, such as the
number of sessions and the bit rate.
Testing HA failover
All traffic should currently be flowing through the primary FortiGate. If it becomes unavailable, traffic fails over to the
secondary FortiGate. When the primary FortiGate rejoins the cluster, the secondary FortiGate continues to operate as
the primary FortiGate.
To test this, ping a reliable IP address from a computer in the internal network, and then power off the primary FortiGate.
There will be a momentary pause in the ping results until traffic diverts to the backup FortiGate, allowing the ping traffic to
continue:
64 bytes from 184.25.76.114: icmp_seq=69 ttl=52 time=8.719 ms\
64 bytes from 184.25.76.114: icmp_seq=70 ttl=52 time=8.822 ms\
64 bytes from 184.25.76.114: icmp_seq=74 ttl=52 time=8.901 ms\
Request timeout for icmp_seq 75\
64 bytes from 184.25.76.114: icmp_seq=76 ttl=52 time=8.860 ms\
64 bytes from 184.25.76.114: icmp_seq=77 ttl=52 time=9.174 ms\
64 bytes from 184.25.76.114: icmp_seq=83 ttl=52 time=8.639 ms}
If you are using port monitoring, you can also unplug the primary FortiGate's internet facing
interface to test failover.
FortiOS 6.4.2 Administration Guide 645
Fortinet Inc.
SD-WAN
After the secondary FortiGate becomes the primary, you can log into the cluster using the same IP address as before the
fail over. If the primary FortiGate is powered off, you will be logged into the backup FortiGate. Check the host name to
verify what device you have logged into. The FortiGate continues to operate in HA mode, and if you restart the primary
FortiGate, it will rejoin the cluster and act as the backup FortiGate. Traffic is not disrupted when the restarted FortiGate
rejoins the cluster.
You can also use the CLI to force an HA failover. See Force HA failover for testing and demonstrations on page 787 for
information.
Testing ISP failover
To test a failover of the redundant internet configuration, you need to simulate a failed internet connection to one of the
ports. You can do this by disconnecting power from the wan1 switch, or by disconnecting the wan1 interfaces of both
FortiGates from ISP1.
After disconnecting, verify that users still have internet access
l Go to Dashboard > Network, and expand the SD-WAN widget. The Upload and Download columns for wan1 show
that traffic is not going through that interface.
l Go to Network > SD-WAN Zones. The Bandwidth, Volume, and Sessions tabs show that traffic is entirely diverted to
wan2.
Users on the network should not notice the wan1 failure. If you are using the wan1 gateway IP address to connect to the
administrator dashboard, it will appear as though you are still connecting through wan1.
After verifying a successful failover, reestablish the connection to ISP1.
Configuring SD-WAN in an HA cluster using internal hardware switches
This setup is not fully compliant with a regular HA configuration. Failover is also unnecessary.
Flipping can occur if failover is configured using a ping server interface.
Two FortiGates with internal hardware switches can be configured as an active-active (A-A) HA pair. In the following
topology, both FortiGates forward traffic through internal switches connected to service providers. SD-WAN is
configured on all upstream interfaces and overlays.
FortiOS 6.4.2 Administration Guide 646
Fortinet Inc.
SD-WAN
This setup is not fully compliant with a regular HA configuration. In a regular HA configuration, two logical switches are
used: one for incoming traffic and one for outgoing traffic. In this example, only incoming traffic has a switch while
outgoing traffic uses the internal switch. This means that if FortiGate A loses power, ISP 1 will not be available.
Traffic will flow either through ISP 1 directly or through ISP 2 via a connection between FortiGate A and FortiGate B’s
internal switch interface. FortiGate A decides how traffic will go through ISP 1 or ISP 2 based on SD-WAN rules. If ISP 1
is not available, then traffic will go through ISP 2.
Failover is unnecessary in this setup. Because SD-WAN will automatically failover traffic to the accessible ISP, traffic is
not blocked so there is no network downtime. Also, the hardware switch interface cannot be monitored as an HA
interface. If HA failover is required, a ping server must be used. The ping server monitor interface has to be configured
under HA settings. This failover setup, however, results in flipping. FortiGate B will act as the primary after failover and
traffic will still flow to the available ISP. Since the broken link to one of the ISPs still fails, HA will start flipping until the link
is back up.
To configure the HA A-A cluster with internal hardware switches:
1. Configure two FortiGates with internal switches in an active-active HA cluster (follow the steps in HA active-active
cluster setup on page 770), starting by connecting the heartbeat interface.
2. On the primary FortiGate, remove the existing interface members:
a. Go to Network > Interfaces.
b. In the LAN section, double-click the internal interface to edit it.
c. In the Interface Members box, remove all the interfaces.
d. Click OK.
FortiOS 6.4.2 Administration Guide 647
Fortinet Inc.
SD-WAN
3. On the primary FortiGate, configure the hardware switch interfaces for the two ISPs:
a. Go to Network > Interfaces.
b. Click Create New > Interface.
c. Enter a name (HD_SW1).
d. For type, select Hardware Switch.
e. For Interface Members, add two interfaces (internal1 and internal2).
f. Configure the remaining settings as needed.
g. Click OK.
h. Repeat these steps to create a second hardware switch interface (HD_SW2) with two interface members
FortiOS 6.4.2 Administration Guide 648
Fortinet Inc.
SD-WAN
(internal3 and internal4).
4. On the primary FortiGate, set up SD-WAN:
The primary FortiGate makes all the SD-WAN decisions.
a. Go to Network > SD-WAN Zones.
b. Click Create New > SD-WAN Member.
c. In the Interface dropdown, select HD_SW1.
d. Leave SD-WAN Zone set to virtual-wan-link.
e. Enter the Gateway address.
f. Click OK.
g. Repeat these steps to add the second interface (HD_SW2).
h. Click Apply.
5. Connect the devices as shown in the topology:
a. Connect the incoming interface to the internal switch on both FortiGates.
b. On FortiGate A, connect ISP 1 to HD_SW1.
FortiOS 6.4.2 Administration Guide 649
Fortinet Inc.
SD-WAN
c. On FortiGate B, connect ISP 2 to HD_SW2.
d. For HD_SW1, connect FortiGate A directly to B.
e. For HD_SW2, connect FortiGate A directly to B.
The default implicit rule load-balancing algorithm for SD-WAN is the source IP address. For
more information about rule types and configurations, see Implicit rule on page 543.
SD-WAN configuration portability
When configuring SD-WAN, adding interfaces to members is optional.
This allows the SD-WAN to be configured without associating any interfaces to SD-WAN members. It also allows a
configuration to be copied directly from one device to another, without requiring the devices to have interfaces with the
same names.
After the configuration is created, add interfaces to the members make it functional.
Example 1
In this example, we create a template with two SD-WAN members configured without assigned interfaces that are used
in a performance SLA and SD-WAN rule. The template can be used to configure new devices, as in Example 2 on page
654. Interfaces are then assigned to the members, and the configuration becomes active.
To create the SD-WAN members in the GUI:
1. Go to Network > SD-WAN Zones.
2. Click Create New > SD-WAN Member.
FortiOS 6.4.2 Administration Guide 650
Fortinet Inc.
SD-WAN
3. Leave all the settings set to their default values and click OK.
4. Repeat the above steps to create a second member.
The empty members are listed on the SD-WAN Zones page.
The members are disabled until interfaces are configured, but can still be used in performance SLAs and SD-WAN
rules.
To create a performance SLA in the GUI:
1. Go to Network > Performance SLA.
2. Click Create New.
3. Configure the performance SLA, specifying the empty members as participants.
4. Click OK.
To create an SD-WAN rule in the GUI:
1. Go to Network > SD-WAN Rules.
2. Click Create New.
FortiOS 6.4.2 Administration Guide 651
Fortinet Inc.
SD-WAN
3. Configure the rule, adding both members to the Interface preference field:
4. Click OK.
To assign interfaces to the SD-WAN members in the GUI:
1. Go to Network > SD-WAN Zones.
2. Edit the first member
3. Set Interface to an actual interface.
4. Click OK.
5. Repeat the above steps to assign an interface to the second member.
To configure the SD-WAN in the CLI:
1. Create SD-WAN members:
config system sdwan
set status enable
config members
edit 1
next
edit 2
next
end
end
FortiOS 6.4.2 Administration Guide 652
Fortinet Inc.
SD-WAN
2. Create a health check (performance SLA):
config system sdwan
config health-check
edit "office"
set server "office365.com"
set protocol http
set sla-fail-log-period 300
set sla-pass-log-period 300
set members 2 1
config sla
edit 1
set latency-threshold 300
set jitter-threshold 200
next
edit 2
set link-cost-factor latency
set latency-threshold 20
next
end
next
end
end
3. Create a service (rule):
config system sdwan
config service
edit 3
set name "Office365"
set mode sla
set internet-service enable
set internet-service-app-ctrl 33182
config sla
edit "office"
set id 2
next
end
set priority-members 1 2
next
end
end
The SD-WAN configuration can now be used in as a template for new spokes, as in Example 2 on page 654.
To assign interfaces to the SD-WAN members in the CLI:
config system sdwan
config members
edit 1
set interface "_OCVPN4-0.0"
next
edit 2
set interface "_OCVPN4-0.1"
next
end
end
FortiOS 6.4.2 Administration Guide 653
Fortinet Inc.
SD-WAN
If no SD-WAN zone is specified, members are added to the default virtual-wan-link zone.
Example 2
In this example, the configuration from Example 1 is copied onto a new FortiGate.
Using the CLI console and the GUI
To copy the SD-WAN configuration from the original FortiGate:
1. Optionally, change the console screen paging setting. See Screen paging on page 32 for details.
2. Open the CLI console.
3. If necessary, click Clear console to empty the console.
4. Enter the following command:
show system sdwan
5. Either click Download and open the file in a text editor, or click Copy to clipboard and paste the content into a text
editor.
6. Edit the CLI configuration as necessary. For example, the first line that shows the show command should be
deleted, and the default health checks can be removed.
7. If required, save the CLI configuration as a text file.
To paste the SD-WAN configuration onto a new FortiGate:
1. Copy the SD-WAN configuration from the text editor.
2. On the new FortiGate, open the CLI console.
3. Press Ctrl + v to paste the CLI commands.
4. In necessary, press Enter to apply the last end command.
The SD-WAN configuration is copied to the new FortiGate.
If the interfaces do not exist, the SD-WAN members are created without interfaces, and are disabled until interfaces
are configured.
FortiOS 6.4.2 Administration Guide 654
Fortinet Inc.
SD-WAN
To assign interfaces to the SD-WAN members:
1. Go to Network > SD-WAN Zones.
2. Edit the first member
3. Set Interface to an actual interface.
4. Click OK.
5. Repeat the above steps to assign an interface to the second member.
Using a terminal emulator
The following instructions use PuTTy. The steps may vary in other terminal emulators.
To copy the SD-WAN configuration from the original FortiGate:
1. Connect to the FortiGate. See Connecting to the CLI on page 24 for details.
2. Enter the following command:
show system sdwan
3. Select the output, press Ctrl + c to copy it, and then paste it into a text editor.
4. Edit the CLI configuration as necessary. For example, the default health checks can be removed.
5. If required, save the CLI configuration as a text file.
To paste the SD-WAN configuration onto a new FortiGate:
1. Copy the SD-WAN configuration from the text editor.
2. Connect to the new FortiGate. See Connecting to the CLI on page 24 for details.
3. Right-click to paste the SD-WAN configuration.
4. In necessary, press Enter to apply the last end command.
The SD-WAN configuration is copied to the new FortiGate.
If the interfaces do not exist, the SD-WAN members are created without interfaces, and are disabled until interfaces
are configured.
To assign interfaces to the SD-WAN members::
config system sdwan
config members
edit 1
set interface "_OCVPN4-0.0"
next
edit 2
set interface "_OCVPN4-0.1"
next
end
end
FortiOS 6.4.2 Administration Guide 655
Fortinet Inc.
SD-WAN
If no SD-WAN zone is specified, members are added to the default virtual-wan-link zone.
SD-WAN cloud on-ramp
In this example, you configure a connection to a new cloud deployment that has some remote servers. SD-WAN is used
to steer traffic through the required overlay tunnel.
The on-premise FortiGate has two internet connections, each with a single VPN connection. The two VPN gateways are
configured on the cloud for redundancy, one terminating at the FortiGate-VM, and the other at the native AWS VPN
Gateway.
This example uses AWS as the Infrastructure as a Service (IaaS) provider, but the same configuration can also apply to
other services. A full mesh VPN setup is not shown, but can be added later if required.
To connect to the servers that are behind the cloud FortiGate-VM, virtual IP addresses (VIPs) are configured on port2 to
map to the servers:
l VPN traffic terminating on port1 is routed to the VIP on port2 to access the web servers.
l VPN traffic terminating on the VPN gateway accesses the VIPs on port2 directly.
There are four major steps to configure this setup:
1. Configuring the VPN overlay between the HQ FortiGate and cloud FortiGate-VM on page 657
2. Configuring the VPN overlay between the HQ FortiGate and AWS native VPN gateway on page 661
3. Configuring the VIP to access the remote servers on page 665
4. Configuring the SD-WAN to steer traffic between the overlays on page 667
After the configuration is complete, verify the traffic to ensure that the configuration is working as expected, see Verifying
the traffic on page 672.
FortiOS 6.4.2 Administration Guide 656
Fortinet Inc.
SD-WAN
Configuring the VPN overlay between the HQ FortiGate and cloud FortiGate-VM
Configure the cloud FortiGate-VM
To create an address for the VPN gateway:
1. Go to Policy & Objects > Addresses and click Create New > Address.
2. Set Name to local_subnet_10_0_2_0.
3. Set IP/Netmask to 10.0.2.0/24.
4. Click OK.
To configure a custom IPsec VPN:
1. Go to VPN > IPsec Wizard.
2. Set Name to Core_Dialup.
3. Set Template type to Custom.
4. Click Next.
5. Configure Network settings:
Remote Gateway Dialup User
Interface port1
NAT Traversal Enable
6. Configure Authentication settings:
Method Pre-shared Key
Pre-shared Key Enter the pre-shared key.
Version 1
Mode Aggressive
This setting allows the peer ID to be specified.
Accept Types Specific peer ID
FortiOS 6.4.2 Administration Guide 657
Fortinet Inc.
SD-WAN
Peer ID IaaS
The other end of the tunnel needs to have its local ID set to IaaS.
7. Leave the default Phase 1 Proposal settings and disable XAUTH.
8. Configure the Phase 2 Selector settings:
Name Ent_Core
Local Address Named Address - local_subnet_10_0_2_0
Remote Address Named Address - all
This setting allows traffic originating from both the remote subnet 10.100.88.0
and the health checks from the VPN interface on the remote FortiGate. For
increased security, each subnet can be specified individually.
9. Click OK.
To configure remote and local tunnel IP addresses:
1. Go to Network > Interfaces and edit the Core_Dialup interface under port1.
2. Set IP to 172.16.200.1.
3. Set Remote IP/Netmask to 172.16.200.2 255.255.255.0. This is where remote health check traffic will come from.
4. Enable Administrative access for HTTPS, PING, and SSH.
5. Click OK.
FortiOS 6.4.2 Administration Guide 658
Fortinet Inc.
SD-WAN
To configure a route to the remote subnet through the tunnel:
1. Go to Network > Static Routes and click Create New.
2. Set Destination to Subnet and enter the IP address and netmask: 10.100.88.0/255.255.255.0.
3. Set Interface to Core_Dialup.
4. Click OK.
To configure a firewall policy to allow traffic from the tunnel to port2:
1. Go to Policy & Objects > Firewall Policy and click Create New.
2. Configure the following:
Name Core_Dialup-to-port2
Incoming Interface Core_Dialup
Outgoing Interface port2
Source all
Destination local_subnet_10_0_2_0
Schedule always
Service ALL
Action ACCEPT
3. Configure the remaining settings as required.
4. Click OK.
FortiOS 6.4.2 Administration Guide 659
Fortinet Inc.
SD-WAN
Configure the HQ FortiGate
To create an address for the VPN gateway:
1. Go to Policy & Objects > Addresses and click Create New > Address.
2. Set Name to remote_subnet_10_0_2_0.
3. Set IP/Netmask to 10.0.2.0/24.
4. Click OK.
To configure a custom IPsec VPN:
1. Go to VPN > IPsec Wizard.
2. Set Name to FGT_AWS_Tun.
3. Set Template type to Custom.
4. Click Next.
5. Configure Network settings:
Remote Gateway Static IP Address
IP Address 100.21.29.17
Interface port5
NAT Traversal Enable
6. Configure Authentication settings:
Method Pre-shared Key
Pre-shared Key Enter the pre-shared key.
Version 1
Mode Aggressive
This setting allows the peer ID to be specified.
Accept Types Any peer ID
7. Leave the default Phase 1 Proposal settings, except set Local ID to IaaS.
8. Disable XAUTH.
9. Configure the Phase 2 Selector settings:
Name FGT_AWS_Tun
Local Address Named Address - all
This setting allows traffic originating from both the local subnet 10.100.88.0
and the health checks from the VPN interface. For increased security, each
subnet can be specified individually.
Remote Address Named Address - remote_subnet_10_0_2_0
10. Click OK.
FortiOS 6.4.2 Administration Guide 660
Fortinet Inc.
SD-WAN
To configure local and remote tunnel IP addresses:
1. Go to Network > Interfaces and edit the FGT_AWS_Tun interface under port5.
2. Set IP to 172.16.200.2.
3. Set Remote IP/Netmask to 172.16.200.1 255.255.255.0.
4. Enable Administrative access for HTTPS, PING, and SSH.
5. Click OK.
Routing is defined when creating the SD-WAN interface. The firewall policy is created after the
SD-WAN interface is defined.
Configuring the VPN overlay between the HQ FortiGate and AWS native VPN
gateway
This example uses static routing. It is assumed that the AWS VPN Gateway is already configured, and that proper
routing is applied on the corresponding subnet.
Verify the AWS configuration
See Creating routing tables and associate subnets in the AWS Administration Guide for configuration details.
To check the AWS configuration:
1. Go to Virtual Private Network (VPN) > Customer Gateways to confirm that the customer gateway defines the
FortiGate IP address as its Gateway IP address, in this case 34.66.121.231.
2. Go to Virtual Private Network (VPN) > Virtual Private Gateways to confirm that a virtual private gateway (VPG) has
been created. In this case it is attached to the Cloud_onRamp VPC that contains the FortiGate and servers.
3. Go to Virtual Private Network (VPN) > Site-to-Site VPN Connections to confirm that site-to-site VPN connections
have been created and attached to the customer gateway and virtual private gateway.
If Routing Options is Static, the IP prefix of the remote subnet on the HQ FortiGate (10.100.88.0) is entered here.
AWS site-to-site VPN always creates two VPN tunnels for redundancy. In this example, only Tunnel 1 is used.
FortiOS 6.4.2 Administration Guide 661
Fortinet Inc.
SD-WAN
4. Click Download Configuration to download the FortiGate's tunnel configurations. The configuration can be referred
to when configuring the FortiGate VPN.
5. The new VPG is attached to your VPC, but to successfully route traffic to the VPG, proper routing must be defined.
Go to Virtual Private Cloud > Subnets, select the Cloud-OnRamp-VPN, and select the Route Table tab to verify that
there are at least two routes to send traffic over the VPG.
l 169.254.0.0/24 defines the tunnel IP address. Health check traffic originating from the FortiGate will come from
this IP range.
l 10.100.0.0/16 defines the remote subnet from the HQ FortiGate.
l Both routes point to the just created VPG vgw-04xxxx.
6. On the cloud FortiGate-VM EC2 instances, ensure that port1 and port2 both have Source/Dest. Check set to false.
This allows the FortiGate to accept and route traffic to and from a different network.
If you launched the instance from the AWS marketplace, this setting defaults to true.
FortiOS 6.4.2 Administration Guide 662
Fortinet Inc.
SD-WAN
Configure routing to the VPG on the cloud FortiGate-VM
To configure routing to the VPG on the cloud FortiGate-VM:
1. Go to Network > Static Routes and click Create New.
2. Set Destination to Subnet and enter the IP address and netmask: 10.100.88.0/255.255.255.0.
3. Set Gateway Address to Specify and enter 10.0.2.1.
4. Set Interface to port2.
The new route must have the same Administrative Distance as the route that was created for traffic through the
Core_Dialup tunnel to ensure that both routes are added to the routing table (see To configure a route to the remote
subnet through the tunnel).
The Gateway Address is arbitrarily set to 10.0.2.1. The VPG does not have an IP address, but the address defined
here allows the FortiGate to route traffic out of port2, while AWS routes the traffic based on its routing table.
5. Click OK.
6. Go to Network > Static Routes to view the configured static routes:
7. If Optimal dashboards is selected, go to Dashboard > Network and expand the Routing widget to view the routing
table.
If Comprehensive dashboards is selected, go to Dashboard > Routing Monitor and select Static & Dynamic in the
widget toolbar to view the routing table:
FortiOS 6.4.2 Administration Guide 663
Fortinet Inc.
SD-WAN
Configure IPsec VPN on the HQ FortiGate
To configure a custom IPsec VPN:
1. Go to VPN > IPsec Wizard.
2. Set Name to AWS_VPG.
3. Set Template type to Custom.
4. Click Next.
5. Configure Network settings:
Remote Gateway Static IP Address
IP Address 34.210.19.225
This address is taken from the downloaded AWS configuration file.
Interface port1
NAT Traversal Enable
6. Configure Authentication settings:
Method Pre-shared Key
Pre-shared Key Enter the pre-shared key.
Version 1
Mode Main
7. Configure the Phase 1 Proposal settings using information from the downloaded AWS configuration file.
8. Disable XAUTH.
9. Configure the Phase 2 Selector settings:
Name AWS_VPG
Local Address Named Address - all
This setting allows traffic originating from both the local subnet 10.100.88.0
and the health checks from the VPN interface. For increased security, each
subnet can be specified individually.
Remote Address Named Address - remote_subnet_10_0_2_0
10. Click OK.
To configure local and remote tunnel IP addresses:
1. Go to Network > Interfaces and edit the AWS_VPG interface under port1.
2. Set IP to 169.254.55.154.
FortiOS 6.4.2 Administration Guide 664
Fortinet Inc.
SD-WAN
3. Set Remote IP/Netmask to 169.254.55.153 255.255.255.0.
4. Enable Administrative access for HTTPS and PING.
5. Click OK.
Routing is defined when creating the SD-WAN interface. The firewall policy is created after the
SD-WAN interface is defined.
Configuring the VIP to access the remote servers
VIPs, interface IP addresses, and policies are created on the cloud FortiGate-VM to allow access to the remote servers.
To configure additional private IPs on AWS for the FortiGate VIP:
1. On the FortiGate EC2 instance, edit the Elastic Network Interface that corresponds to port2. In this example,
Network Interface eth1.
2. Go to Actions > Manage IP Addresses.
3. Add two private IP address in the 10.0.2.0/24 subnet.
These address will be used in the VIPs on the FortiGate. This ensures that traffic to these IP addresses is routed to
the FortiGate by AWS.
4. Click Yes, Update.
To configure VIPs on the cloud FortiGate-VM:
1. Go to Policy & Objects > Virtual IPs and click Create New > Virtual IP.
2. Configure the following:
Name VIP-HTTP
Interface port2
External IP address/range 10.0.2.20
Mapped IP address/range 10.0.3.33
FortiOS 6.4.2 Administration Guide 665
Fortinet Inc.
SD-WAN
3. Click OK.
4. Create a second VIP for the FTP server with the following settings:
Name VIP-FTP
Interface port2
External IP address/range 10.0.2.21
Mapped IP address/range 10.0.3.44
To configure firewall policies to allow traffic from port2 to port3:
1. Go to Policy & Objects > Firewall Policy and click Create New.
2. Configure the following:
Name To-WebServer
Incoming Interface port2
Outgoing Interface port3
Source all
Destination VIP-HTTP
Schedule always
Service ALL
Action ACCEPT
NAT Enabled
FortiOS 6.4.2 Administration Guide 666
Fortinet Inc.
SD-WAN
3. Configure the remaining settings as required.
4. Click OK.
5. Create a second policy for the FTP VIP with the following settings:
Name To-FTP
Incoming Interface port2
Outgoing Interface port3
Source all
Destination VIP-FTP
Schedule always
Service ALL
Action ACCEPT
NAT Enabled
6. Click OK.
Configuring the SD-WAN to steer traffic between the overlays
Configure the HQ FortiGate to use two overlay tunnels for SD-WAN, steering HTTPS and HTTP traffic through the FGT_
AWS_Tun tunnel, and SSH and FTP throguh the AWS_VPG tunnel.
1. Add SD-WAN member interfaces
2. Configure a route to the remote network
3. Configure firewall policies
FortiOS 6.4.2 Administration Guide 667
Fortinet Inc.
SD-WAN
4. Configure a health check
5. Configure SD-WAN rules
To add SD-WAN member interfaces:
1. Go to Network > SD-WAN Zones and click Create New > SD-WAN Member.
2. Set Interface to AWS_VPG then click OK.
3. Click Create New > SD-WAN Member again.
4. Set Interface to FGT_AWS_Tun.
5. Set Gateway to 172.16.200.1.
6. Click OK.
To configure a route to the remote network 10.0.2.0/24:
1. Go to Network > Static Routes and click Create New.
2. Set Destination to Subnet and enter the IP address and netmask: 10.0.2.0/255.255.255.0.
3. Set Interface to SD-WAN.
4. Click OK.
Individual routes to each tunnel are automatically added to the routing table with the same distance:
FortiOS 6.4.2 Administration Guide 668
Fortinet Inc.
SD-WAN
To configure firewall policies to allow traffic from the internal subnet to SD-WAN:
1. Go to Policy & Objects > Firewall Policy and click Create New.
2. Configure the following:
Name ISFW-to-IaaS
Incoming Interface port3
Outgoing Interface virtual-wan-link
Source all
Destination all
Schedule always
Service ALL
Action ACCEPT
NAT Enabled
FortiOS 6.4.2 Administration Guide 669
Fortinet Inc.
SD-WAN
3. Configure the remaining settings as required.
4. Click OK.
Once the firewall policies are configured, the VPN tunnels should come up when there is traffic.
To configure a health check to monitor the status of the tunnels:
As you are accessing the servers on the 10.0.2.0/24 subnet, it is preferable to use the FortiGate port2 interface as the
ping server for detection. This ensures that, if the gateway is not reachable in either tunnel, its routes are brought down
and traffic continues on the other tunnel.
1. Go to Network > Performance SLA and click Create New.
2. Configure the following:
Name ping_AWS_Gateway
Protocol Ping
Server 10.0.2.10
Participants Specify
Add AWS_VPG and FGT_AWS_Tun as participants.
FortiOS 6.4.2 Administration Guide 670
Fortinet Inc.
SD-WAN
3. Click OK.
Health check probes originate from the VPN interface's IP address. This is why the phase2 selectors are configured
with Local Address set to all.
To configure SD-WAN rules to steer traffic:
HTTPS and HTTP traffic is steered to the FGT_AWS_Tun tunnel, and SSH and FTP traffic is steered to the AWS_VPG
tunnel. The Manual algorithm is used in this example.
1. Go to Network > SD-WAN Rules and click Create New.
2. Configure the following:
Name http-to-FGT_AWS_Tun
Source Address all
Address remote_subnet_10_0_2_0
Protocol TCP
Port range 80 - 80
Outgoing Interfaces Manual
Interface preference FGT_AWS_Tun
FortiOS 6.4.2 Administration Guide 671
Fortinet Inc.
SD-WAN
3. Click OK.
4. Create other SD-WAN rules as required:
Verifying the traffic
To verify that pings are sent across the IPsec VPN tunnels
l On the HQ FortiGate, run the following CLI command:
# diagnose sniffer packet any 'host 10.0.2.10' 4 0 1 interfaces=[any]
filters=[host 10.0.2.10]
2020-06-05 11:35:14.822600 AWS_VPG out 169.254.55.154 -> 10.0.2.10: icmp: echo request
2020-06-05 11:35:14.822789 FGT_AWS_Tun out 172.16.200.2 -> 10.0.2.10: icmp: echo request
2020-06-05 11:35:14.877862 FGT_AWS_Tun in 10.0.2.10 -> 172.16.200.2: icmp: echo reply
2020-06-05 11:35:14.878887 AWS_VPG in 10.0.2.10 -> 169.254.55.154: icmp: echo reply
l On the cloud FortiGate-VM, run the following CLI command:
# diagnose sniffer packet any 'host 10.0.2.10' 4 0 1 interfaces=[any]
filters=[host 10.0.2.10]
2020-06-05 11:37:57.176329 port2 in 169.254.55.154 -> 10.0.2.10: icmp: echo request
2020-06-05 11:37:57.176363 port2 out 10.0.2.10 -> 169.254.55.154: icmp: echo reply
FortiOS 6.4.2 Administration Guide 672
Fortinet Inc.
SD-WAN
2020-06-05 11:37:57.176505 Core_Dialup in 172.16.200.2 -> 10.0.2.10: icmp: echo request
2020-06-05 11:37:57.176514 Core_Dialup out 10.0.2.10 -> 172.16.200.2: icmp: echo reply
To verify the SLA health checks on the HQ FortiGate:
1. Go to Network > Performance SLA and select Packet Loss and the ping_AWS_Gateway SLA:
2. Run the following CLI command:
# diagnose sys sdwan health-check
…
Seq(1 AWS_VPG): state(alive), packet-loss(0.000%) latency(56.221), jitter(0.290) sla_
map=0x0
Seq(2 FGT_AWS_Tun): state(alive), packet-loss(0.000%) latency(55.039), jitter(0.223)
sla_map=0x0
To verify service rules:
1. Go to Network > SD-WAN Rules:
2. Run the following CLI command:
# diagnose sys sdwan service
Service(1): Address Mode(IPV4) flags=0x0
Gen(1), TOS(0x0/0x0), Protocol(6: 80->80), Mode(manual)
Members:
1: Seq_num(2 FGT_AWS_Tun), alive, selected
Src address:
0.0.0.0-255.255.255.255
Dst address:
10.0.2.0-10.0.2.255
FortiOS 6.4.2 Administration Guide 673
Fortinet Inc.
SD-WAN
Service(2): Address Mode(IPV4) flags=0x0
Gen(1), TOS(0x0/0x0), Protocol(6: 22->22), Mode(manual)
Members:
1: Seq_num(1 AWS_VPG), alive, selected
Src address:
0.0.0.0-255.255.255.255
Dst address:
10.0.2.0-10.0.2.255
Service(3): Address Mode(IPV4) flags=0x0
Gen(1), TOS(0x0/0x0), Protocol(6: 443->443), Mode(manual)
Members:
1: Seq_num(2 FGT_AWS_Tun), alive, selected
Src address:
0.0.0.0-255.255.255.255
Dst address:
10.0.2.0-10.0.2.255
Service(4): Address Mode(IPV4) flags=0x0
Gen(1), TOS(0x0/0x0), Protocol(0: 1->65535), Mode(manual)
Members:
1: Seq_num(1 AWS_VPG), alive, selected
Src address:
0.0.0.0-255.255.255.255
Dst address:
10.0.2.21-10.0.2.21
To verify that sessions are going to the correct tunnel:
1. Run the following CLI command to verify that HTTPS and HTTP traffic destined for the Web server at 10.0.2.20
uses FGT_AWS_Tun:
# diagnose sys session filter dst 10.0.2.20
# diagnose sys session list
session info: proto=6 proto_state=11 duration=2 expire=3597 timeout=3600 flags=00000000
socktype=0 sockport=0 av_idx=0 use=4
origin-shaper=
reply-shaper=
per_ip_shaper=
class_id=0 ha_id=0 policy_dir=0 tunnel=FGT_AWS_Tun/ vlan_cos=0/255
state=log may_dirty npu f00 csf_syncd_log app_valid
statistic(bytes/packets/allow_err): org=593/4/1 reply=3689/5/1 tuples=3
tx speed(Bps/kbps): 264/2 rx speed(Bps/kbps): 1646/13
orgin->sink: org pre->post, reply pre->post dev=0->18/18->0 gwy=172.16.200.1/0.0.0.0
hook=post dir=org act=snat 10.100.88.101:55589->10.0.2.20:80(172.16.200.2:55589)
hook=pre dir=reply act=dnat 10.0.2.20:80->172.16.200.2:55589(10.100.88.101:55589)
hook=post dir=reply act=noop 10.0.2.20:80->10.100.88.101:55589(0.0.0.0:0)
pos/(before,after) 0/(0,0), 0/(0,0)
src_mac=00:09:0f:00:03:01
misc=0 policy_id=32 auth_info=0 chk_client_info=0 vd=0
serial=00b7442c tos=ff/ff app_list=2000 app=34050 url_cat=0
sdwan_mbr_seq=0 sdwan_service_id=0
rpdb_link_id= ff000001 rpdb_svc_id=2154552596 ngfwid=n/a
npu_state=0x3041008
FortiOS 6.4.2 Administration Guide 674
Fortinet Inc.
SD-WAN
session info: proto=6 proto_state=66 duration=1 expire=3 timeout=3600 flags=00000000
socktype=0 sockport=0 av_idx=0 use=4
origin-shaper=
reply-shaper=
per_ip_shaper=
class_id=0 ha_id=0 policy_dir=0 tunnel=FGT_AWS_Tun/ vlan_cos=0/255
state=log may_dirty ndr f00 csf_syncd_log
statistic(bytes/packets/allow_err): org=48/1/0 reply=40/1/1 tuples=3
tx speed(Bps/kbps): 26/0 rx speed(Bps/kbps): 22/0
orgin->sink: org pre->post, reply pre->post dev=5->18/18->5
gwy=172.16.200.1/10.100.88.101
hook=post dir=org act=snat 10.100.88.101:55621->10.0.2.20:443(172.16.200.2:55621)
hook=pre dir=reply act=dnat 10.0.2.20:443->172.16.200.2:55621(10.100.88.101:55621)
hook=post dir=reply act=noop 10.0.2.20:443->10.100.88.101:55621(0.0.0.0:0)
pos/(before,after) 0/(0,0), 0/(0,0)
src_mac=00:09:0f:00:03:01
misc=0 policy_id=32 auth_info=0 chk_client_info=0 vd=0
serial=00b74b50 tos=ff/ff app_list=2000 app=0 url_cat=0
sdwan_mbr_seq=0 sdwan_service_id=0
rpdb_link_id= ff000003 rpdb_svc_id=2154552596 ngfwid=n/a
npu_state=0x3041008
2. Run the following CLI command to verify that SSH and FTP traffic destined for the FTP server at 10.0.2.21 uses
AWS_VPG:
# diagnose sys session filter dst 10.0.2.20
# diagnose sys session list
session info: proto=6 proto_state=11 duration=197 expire=3403 timeout=3600
flags=00000000 socktype=0 sockport=0 av_idx=0 use=4
origin-shaper=
reply-shaper=
per_ip_shaper=
class_id=0 ha_id=0 policy_dir=0 tunnel=AWS_VPG/ helper=ftp vlan_cos=0/255
state=log may_dirty ndr npu f00 csf_syncd_log app_valid
statistic(bytes/packets/allow_err): org=580/12/1 reply=863/13/1 tuples=3
tx speed(Bps/kbps): 2/0 rx speed(Bps/kbps): 4/0
orgin->sink: org pre->post, reply pre->post dev=5->17/17->5
gwy=169.254.55.153/10.100.88.101
hook=post dir=org act=snat 10.100.88.101:55528->10.0.2.21:21(169.254.55.154:55528)
hook=pre dir=reply act=dnat 10.0.2.21:21->169.254.55.154:55528(10.100.88.101:55528)
hook=post dir=reply act=noop 10.0.2.21:21->10.100.88.101:55528(0.0.0.0:0)
pos/(before,after) 0/(0,0), 0/(0,0)
src_mac=00:09:0f:00:03:01
misc=0 policy_id=32 auth_info=0 chk_client_info=0 vd=0
serial=00b72a5f tos=ff/ff app_list=2000 app=15896 url_cat=0
sdwan_mbr_seq=0 sdwan_service_id=0
rpdb_link_id= ff000004 rpdb_svc_id=2149689849 ngfwid=n/a
npu_state=0x3041008
session info: proto=6 proto_state=11 duration=3 expire=3596 timeout=3600 flags=00000000
socktype=0 sockport=0 av_idx=0 use=4
origin-shaper=
reply-shaper=
per_ip_shaper=
class_id=0 ha_id=0 policy_dir=0 tunnel=AWS_VPG/ vlan_cos=0/255
state=log may_dirty ndr npu f00 csf_syncd_log app_valid
FortiOS 6.4.2 Administration Guide 675
Fortinet Inc.
SD-WAN
statistic(bytes/packets/allow_err): org=1496/6/1 reply=1541/5/1 tuples=3
tx speed(Bps/kbps): 416/3 rx speed(Bps/kbps): 429/3
orgin->sink: org pre->post, reply pre->post dev=5->17/17->5
gwy=169.254.55.153/10.100.88.101
hook=post dir=org act=snat 10.100.88.101:55644->10.0.2.21:22(169.254.55.154:55644)
hook=pre dir=reply act=dnat 10.0.2.21:22->169.254.55.154:55644(10.100.88.101:55644)
hook=post dir=reply act=noop 10.0.2.21:22->10.100.88.101:55644(0.0.0.0:0)
pos/(before,after) 0/(0,0), 0/(0,0)
src_mac=00:09:0f:00:03:01
misc=0 policy_id=32 auth_info=0 chk_client_info=0 vd=0
serial=00b75287 tos=ff/ff app_list=2000 app=16060 url_cat=0
sdwan_mbr_seq=0 sdwan_service_id=0
rpdb_link_id= ff000002 rpdb_svc_id=2149689849 ngfwid=n/a
npu_state=0x3041008
To simulate an issue on an overlay VPN tunnel:
On the cloud FortiGate-VM, disable the firewall policy allowing Core_Dialup to port2.
1. Health-checks through the FGT_AWS_Tun tunnel fail:
a. Go to Network > Performance SLA and select Packet Loss and the ping_AWS_Gateway SLA:
b. Run the following CLI command:
# diagnose sys sdwan health-check
…
Seq(1 AWS_VPG): state(alive), packet-loss(0.000%) latency(52.746), jitter(0.713) sla_
map=0x0
Seq(2 FGT_AWS_Tun): state(dead), packet-loss(19.000%) sla_map=0x0
2. Service rules show that the member is down:
a. Go to Network > SD-WAN Rules:
FortiOS 6.4.2 Administration Guide 676
Fortinet Inc.
SD-WAN
b. Run the following CLI command:
# diagnose sys sdwan service
Service(1): Address Mode(IPV4) flags=0x0
Gen(2), TOS(0x0/0x0), Protocol(6: 80->80), Mode(manual)
Members:
1: Seq_num(2 FGT_AWS_Tun), dead
Src address:
0.0.0.0-255.255.255.255
Dst address:
10.0.2.0-10.0.2.255
Service(2): Address Mode(IPV4) flags=0x0
Gen(1), TOS(0x0/0x0), Protocol(6: 22->22), Mode(manual)
Members:
1: Seq_num(1 AWS_VPG), alive, selected
Src address:
0.0.0.0-255.255.255.255
Dst address:
10.0.2.0-10.0.2.255
Service(3): Address Mode(IPV4) flags=0x0
Gen(2), TOS(0x0/0x0), Protocol(6: 443->443), Mode(manual)
Members:
1: Seq_num(2 FGT_AWS_Tun), dead
Src address:
0.0.0.0-255.255.255.255
Dst address:
10.0.2.0-10.0.2.255
Service(4): Address Mode(IPV4) flags=0x0
Gen(1), TOS(0x0/0x0), Protocol(0: 1->65535), Mode(manual)
Members:
1: Seq_num(1 AWS_VPG), alive, selected
Src address:
0.0.0.0-255.255.255.255
Dst address:
10.0.2.21-10.0.2.21
3. Sessions are redirected to the working tunnel:
a. Run the following CLI command:
# diagnose sys session list
session info: proto=6 proto_state=11 duration=3 expire=3596 timeout=3600
flags=00000000 socktype=0 sockport=0 av_idx=0 use=4
origin-shaper=
reply-shaper=
per_ip_shaper=
class_id=0 ha_id=0 policy_dir=0 tunnel=AWS_VPG/ vlan_cos=0/255
state=log may_dirty ndr npu f00 csf_syncd_log app_valid
statistic(bytes/packets/allow_err): org=504/4/1 reply=620/3/1 tuples=3
tx speed(Bps/kbps): 150/1 rx speed(Bps/kbps): 184/1
orgin->sink: org pre->post, reply pre->post dev=0->17/17->0
gwy=169.254.55.153/0.0.0.0
hook=post dir=org act=snat 10.100.88.101:56373->10.0.2.20:80(169.254.55.154:56373)
FortiOS 6.4.2 Administration Guide 677
Fortinet Inc.
SD-WAN
hook=pre dir=reply act=dnat 10.0.2.20:80->169.254.55.154:56373(10.100.88.101:56373)
hook=post dir=reply act=noop 10.0.2.20:80->10.100.88.101:56373(0.0.0.0:0)
pos/(before,after) 0/(0,0), 0/(0,0)
src_mac=00:09:0f:00:03:01
misc=0 policy_id=32 auth_info=0 chk_client_info=0 vd=0
serial=00b87199 tos=ff/ff app_list=2000 app=34050 url_cat=0
rpdb_link_id= 80000000 rpdb_svc_id=0 ngfwid=n/a
npu_state=0x3041008
session info: proto=6 proto_state=66 duration=3 expire=1 timeout=3600 flags=00000000
socktype=0 sockport=0 av_idx=0 use=4
origin-shaper=
reply-shaper=
per_ip_shaper=
class_id=0 ha_id=0 policy_dir=0 tunnel=AWS_VPG/ vlan_cos=0/255
state=log may_dirty ndr f00 csf_syncd_log
statistic(bytes/packets/allow_err): org=48/1/0 reply=40/1/1 tuples=3
tx speed(Bps/kbps): 15/0 rx speed(Bps/kbps): 12/0
orgin->sink: org pre->post, reply pre->post dev=5->17/17->5
gwy=169.254.55.153/10.100.88.101
hook=post dir=org act=snat 10.100.88.101:56383->10.0.2.20:443(169.254.55.154:56383)
hook=pre dir=reply act=dnat 10.0.2.20:443->169.254.55.154:56383(10.100.88.101:56383)
hook=post dir=reply act=noop 10.0.2.20:443->10.100.88.101:56383(0.0.0.0:0)
pos/(before,after) 0/(0,0), 0/(0,0)
src_mac=00:09:0f:00:03:01
misc=0 policy_id=32 auth_info=0 chk_client_info=0 vd=0
serial=00b876bb tos=ff/ff app_list=2000 app=0 url_cat=0
rpdb_link_id= 80000000 rpdb_svc_id=0 ngfwid=n/a
npu_state=0x3041008
total session 2
4. Routes to the FGT_AWS_Tun tunnel are removed:
a. If Optimal dashboards is selected, go to Dashboard > Network and expand the Routing widget to view the
routing table.
If Comprehensive dashboards is selected, go to Dashboard > Routing Monitor and select Static & Dynamic in
the widget toolbar to view the routing table:
b. Run the following CLI command:
# get router info routing-table all
Codes: K - kernel, C - connected, S - static, R - RIP, B - BGP
O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default
FortiOS 6.4.2 Administration Guide 678
Fortinet Inc.
SD-WAN
Routing table for VRF=0
S* 0.0.0.0/0 [1/0] via 10.100.64.254, port1
[1/0] via 10.100.65.254, port5
S 10.0.2.0/24 [1/0] via 169.254.55.153, AWS_VPG
C 10.0.10.0/24 is directly connected, Branch-HQ-A
C 10.0.10.1/32 is directly connected, Branch-HQ-A
…
Hub and spoke SD-WAN deployment example
This topology diagram shows an overview of the network that is configured in this example:
Datacenter configuration
The datacenter is configured to support:
FortiOS 6.4.2 Administration Guide 679
Fortinet Inc.
SD-WAN
l Zero touch provisioning of new spokes
l Point to multipoint VPN
l Central management of access with the datacenter firewall
l Dynamic peering, to share routing information between branches and the datacenter
l VDOM compatibility, with inter-VDOM links for isolation and segmentation
To configure the datacenter, complete the following steps:
1. Configure dial-up (dynamic) VPN
2. Configure VPN interfaces
3. Configure loopback interface
4. Configure BGP
5. Firewall policies
6. Configure a black hole route
Configure dial-up (dynamic) VPN
Dial-up, or dynamic, VPNs are used to facilitate zero touch provisioning of new spokes to establish VPN connections to
the hub FortiGate.
The exchange-interface-ip option is enabled to allow the exchange of IPsec interface IP addresses. This allows a
point to multipoint connection to the hub FortiGate.
The add-route option is disabled to allow multiple dial-up tunnels to be established to the same host that is advertising
the same network. This dynamic network discovery is facilitated by the BGP configuration; see Configure BGP on page
682 for details.
Wildcard security associations are defined for the phase2 interface because routing is used to determine if traffic is
subject to encryption and transmission through the IPsec VPN tunnel. The phase1 interface name must be 11 characters
or less.
A dynamic VPN configuration must be defined for each interface that connects to the internet.
To configure the IPsec phase1 interfaces:
config vpn ipsec phase1-interface
edit "vpn-isp-a"
set type dynamic
set interface "port2"
set peertype any
set exchange-interface-ip enable
set proposal aes256-sha256
set add-route disable
set dhgrp 5
set net-device enable
set psksecret ********
next
edit "vpn-isp-b"
set type dynamic
set interface "port3"
set peertype any
set exchange-interface-ip enable
set proposal aes256-sha256
FortiOS 6.4.2 Administration Guide 680
Fortinet Inc.
SD-WAN
set add-route disable
set dhgrp 5
set net-device enable
set psksecret ********
next
end
To configure the IPsec phase2 interfaces:
config vpn ipsec phase2-interface
edit "vpn-isp-a_p2"
set phase1name "vpn-isp-a"
set proposal aes256-sha256
set pfs disable
set replay disable
next
edit "vpn-isp-b_p2"
set phase1name "vpn-isp-b"
set proposal aes256-sha256
set pfs disable
set replay disable
next
end
Configure VPN interfaces
To establish the BGP session, IP addresses must be assigned to the tunnel interfaces that BGP will use to peer.
The hub IP address is set to the address that the tunnels connect to. The remote IP address is set to highest unused IP
address that is part of the tunnel network. This establishes two connected routes directly back to the branch FortiGate in
the hub FortiGate's routing table.
Ping is allowed on the virtual interface to confirm that a point to point tunnel has been established between the hub and
branch FortiGates.
To define IP addresses for VPN interfaces:
config system interface
edit "vpn-isp-a"
set vdom "root"
set ip 10.254.0.1 255.255.255.255
set allowaccess ping
set type tunnel
set remote-ip 10.254.0.254 255.255.255.0
set interface "port2"
next
edit "vpn-isp-b"
set vdom "root"
set ip 10.254.1.1 255.255.255.255
set allowaccess ping
set type tunnel
set remote-ip 10.254.1.254 255.255.255.0
set interface "port3"
next
end
FortiOS 6.4.2 Administration Guide 681
Fortinet Inc.
SD-WAN
Configure loopback interface
A loopback interface must be defined on the hub FortiGate to be used as a common probe point for the FortiGates that
are using SD-WAN. The FortiGates send a probe packet from each of their SD-WAN member interfaces so that they can
determine the best route according to their policies. Ping is allowed so that it can be used for measurements.
To configure the loopback interface on the hub FortiGate:
config system interface
edit "loopback_0"
set vdom "root"
set ip 10.255.255.1 255.255.255.255
set allowaccess ping
set type loopback
next
end
Configure BGP
Network route discovery is facilitated by BGP.
EBGP is used to prevent the redistribution of routes that are in the same Autonomous System (AS) number as the host.
It is also required to influence route selection on the branches with AS-Path prepending. EBGP multipath is enabled so
that the hub FortiGate can dynamically discover multiple paths for networks that are advertised at the branches.
The neighbor range and group settings are configured to allow peering relationships to be established without defining
each individual peer. Connecting branches have their tunnel interfaces configured within the range of the BGP peer.
In order to facilitate the fastest route failovers, configure the following timers to their lowest levels: scan-time,
advertisement-interval, keep-alive-timer, and holdtime-timer.
To configure BGP on the hub FortiGate:
config router bgp
set as 65500
set router-id 10.10.0.1
set ebgp-multipath enable
set graceful-restart enable
config neighbor-group
edit "branch-peers-1"
set soft-reconfiguration enable
set remote-as 65501
next
edit "branch-peers-2"
set soft-reconfiguration enable
set remote-as 65501
next
end
config neighbor-range
edit 1
set prefix 10.254.0.0 255.255.255.0
set neighbor-group "branch-peers-1"
next
edit 2
FortiOS 6.4.2 Administration Guide 682
Fortinet Inc.
SD-WAN
set prefix 10.254.1.0 255.255.255.0
set neighbor-group "branch-peers-2"
next
end
config network
edit 1
set prefix 10.200.1.0 255.255.255.0
next
edit 2
set prefix 10.200.0.0 255.255.255.0
next
edit 3
set prefix 10.200.3.0 255.255.255.0
next
end
end
Firewall policies
Centralized access is controlled from the hub FortiGate using Firewall policies. In addition to layer three and four
inspection, security policies can be used in the policies for layer seven traffic inspection.
It is best practice to only allow the networks and services that are required for communication through the firewall. The
following rules are the minimum that must be configured to allow SD-WAN to function:
Source Destination Source Destination Action Schedule Service Comments
Interface Interface Address Address
<vpn <internal <branch <hub Accept Always ICMP Allow health
interfaces> Interface> tunnel IP FortiGate checks to the
addresses> internal hub
interface> FortiGate
<vpn <internal <branch <datacenter Accept Always <allowed Allow traffic
interfaces> Interface> networks> networks> services> from branch
networks
For this example, a simple policy that allows all traffic is configured.
To configure a firewall policy:
config firewall policy
edit 1
set name "Allow All"
set srcintf "any"
set dstintf "any"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
next
end
FortiOS 6.4.2 Administration Guide 683
Fortinet Inc.
SD-WAN
Configure a black hole route
If there is a temporary loss of connectivity to the branch routes, it is best practice to send the traffic that is destined for
those networks into a black hole until connectivity is restored.
To configure a black hole route for branch networks:
config router static
edit 6
set dst 10.0.0.0/14
set distance 254
set blackhole enable
next
end
Branch configuration
The branches are configured to support:
l Client side SD-WAN with intelligent load balancing based on link quality
l Easy to create configuration templates for quick spoke deployment
l Split tunnel deployment for local internet access
l VDOM compatibility, with inter-VDOM links for isolation and segmentation
To configure a branch, complete the following steps:
1. Configure VPN to the hub
2. Configure VPN interfaces
3. Configure BGP
4. Configure SD-WAN
5. Firewall configuration
Configure VPN to the hub
The branch uses a normal site-to-site VPN configuration.
Wildcard security associations are define in the phase2 configuration because dynamic routing with BGP determines
what traffic must traverse the VPN tunnel for encryption/transmission.
To make sure that the VPN is established, auto-negotiate is enabled.
To configure the IPsec phase1 interfaces:
config vpn ipsec phase1-interface
edit "vpn_dc1-1"
set interface "port2"
set peertype any
set exchange-interface-ip enable
set proposal aes256-sha256
set dhgrp 5
set remote-gw 172.16.0.78
FortiOS 6.4.2 Administration Guide 684
Fortinet Inc.
SD-WAN
set psksecret ********
next
edit "vpn_dc1-2"
set interface "port3"
set peertype any
set exchange-interface-ip enable
set proposal aes256-sha256
set dhgrp 5
set remote-gw 172.16.0.82
set psksecret ********
next
end
To configure the IPsec phase2 interfaces:
config vpn ipsec phase2-interface
edit "vpn_dc1-1_p2"
set phase1name "vpn_dc1-1"
set proposal aes256-sha256
set pfs disable
set replay disable
set auto-negotiate enable
next
edit "vpn_dc1-2_p2"
set phase1name "vpn_dc1-2"
set proposal aes256-sha256
set pfs disable
set replay disable
set auto-negotiate enable
next
end
Configure VPN interfaces
The branch must define its local tunnel interface IP address, and the remote tunnel interface IP address of the
datacenter FortiGate, to establish the point to multipoint VPN.
To define IP addressses for VPN interfaces:
config system interface
edit "vpn_dc1-1"
set vdom "root"
set ip 10.255.0.2 255.255.255.255
set allowaccess ping
set type tunnel
set remote-ip 10.255.0.1 255.255.255.255
set interface "port2"
next
edit "vpn_dc1-2"
set vdom "root"
set ip 10.255.1.2 255.255.255.255
set allowaccess ping
set type tunnel
set remote-ip 10.255.1.1 255.255.255.255
FortiOS 6.4.2 Administration Guide 685
Fortinet Inc.
SD-WAN
set interface "port3"
next
end
Configure BGP
BGP enables learning dynamic routes from the datacenter. The BGP configuration is normal, with the definition of the
datacenter FortiGate tunnel IP addresses set as BGP peers.
Routes that have the same network mask, administrative distance, priority, and AS length are automatically considered
for SD-WAN when the interfaces that those routes are on are added to the SD-WAN interface group.
In order to facilitate the fastest route failovers, configure the following timers to their lowest levels: scan-time,
advertisement-interval, keep-alive-timer, and holdtime-timer.
The distance-external option might need to be configured if you need routes that are learned from BGP to take
precedence over static routes.
To configure BGP on the branch FortiGate:
config router bgp
set as 65501
set router-id 10.254.0.2
set ebgp-multipath enable
config neighbor
edit "10.254.0.1"
set soft-reconfiguration enable
set remote-as 65500
next
edit "10.254.1.1"
set soft-reconfiguration enable
set remote-as 65500
next
end
end
Configure SD-WAN
SD-WAN configuration is required to load balance based on the quality of the links. It can be configured to select the best
link based on characteristics such as jitter, packet loss, and latency. A policy route is created by the FortiGate to select
the best link based on the defined criteria.
For SD-WAN interfaces, or members, the peer is defined to reference the BGP neighbor that is tied to that specific
interface.
The health check is the ping server that gathers the link characteristics used for link selection. It is recommended that the
minimum failtime be set to 2.
The service definition defines the criteria for the policy routes. It can match based on the following characteristics:
l Protocol
l Destination Address
l Source Address
l Identity Based Group
FortiOS 6.4.2 Administration Guide 686
Fortinet Inc.
SD-WAN
l Internet Service Definition
l Source Port
l Destination Port
l Destination Route Tag
To dynamically determine the networks of the policy routes, routes that are learned from a BGP neighbor are matched
against a route map, and a tag is defined for the matching routes. The service rules learn the networks based on these
tags, instead of defining objects based on the learned addresses' network prefixes . See Dynamic definition of SD-WAN
routes on page 689 for details on configuring the FortiGate to use the destination tags for the SD-WAN service definition.
To define the SD-WAN member interfaces:
config system sdwan
set status enable
config members
edit 1
set interface "vpn_dc1-1"
next
edit 2
set interface "vpn_dc1-2"
next
end
end
To define the SD-WAN health checks:
config system sdwan
config health-check
edit "datacenter1"
set server "10.200.1.1"
set interval 1
set failtime 2
set recoverytime 10
next
end
end
To define the SD-WAN service rules:
config system sdwan
config service
edit 1
set mode priority
set dst n-corporate
set health-check "datacenter1"
set priority-members 1 2
next
end
end
FortiOS 6.4.2 Administration Guide 687
Fortinet Inc.
SD-WAN
Firewall configuration
Centralized access is controlled from the hub FortiGate using Firewall policies. In addition to layer three and four
inspection, security policies can be used in the policies for layer seven traffic inspection.
It is best practice to only allow the networks and services that are required for communication through the firewall. The
following rules are the minimum that must be configured to allow SD-WAN to function:
Source Destination Source Destination Action Schedule Service Comments
Interface Interface Address Address
<internal <virtual wan <branch <datacenter Accept Always <allowed Allow traffic
interface> link> networks> networks> services> from branch
to datacenter
<virtual <internal <datacenter <branch Accept Always <allowed Allow traffic
wan link> Interface> networks> networks> services> from
datacenter to
branch
For this example, a simple policy that allows all traffic is configured.
To configure a firewall policy:
config firewall policy
edit 1
set name "Allow All"
set srcintf "any"
set dstintf "any"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
next
end
Validation
The following commands can be used to validate the connections on the datacenter and branches.
Datacenter
Routing table:
get router info routing-table all
VPN establishment:
diagnose vpn ike gateway list
FortiOS 6.4.2 Administration Guide 688
Fortinet Inc.
SD-WAN
Branch
SD-WAN validation:
diagnose sys sdwan member
diagnose sys sdwan service
diagnose sys sdwan health-check
Routing table:
get router info routing-table all
get router info route-map-address
get router info bgp route-map <route-map-name>
VPN establishment:
diagnose vpn ike gateway list
Dynamic definition of SD-WAN routes
Dynamic definitions of SD-WAN routes alleviate administrators from needing to know the destination of the traffic that is
being load balanced, which, in an environment where routes are constantly added and removed, required a significant
amount of administrative overhead.
The FortiGate can be configured to apply a route map to a BGP neighbor, and tag the routes that are learned from that
neighbor with the set-route-tag command. After those routes are assigned a tag ID in the route map, the ID can be
referenced in the SD-WAN rule.
To define the route map to apply to the BGP neighbor:
config router route-map
edit "map-comm1"
config rule
edit 1
set match-origin igp
set set-route-tag 12
next
edit 2
set match-ip-address "pf-all-in"
set set-route-tag 11
next
end
next
end
To apply the route map to the BGP neighbor:
config router bgp
config neighbor
edit "10.254.0.1"
FortiOS 6.4.2 Administration Guide 689
Fortinet Inc.
SD-WAN
set route-map-in "map-comm1"
next
end
end
To reference tagged routes in an SD-WAN rule:
config system sdwan
config service
edit 1
set mode priority
set dst-tag 11
set health-check "datacenter1"
set priority-members 1 2
next
end
end
Adding another datacenter
Datacenter FortiGates should be configured to establish an OSPF neighbor relationship with the internal core router.
This allows the dynamic redistribution of routes to the branches that are receiving updates from the datacenter
FortiGates.
To ensure the fastest failover with OSPF, the following timers are set to their minimum levels: spf-timers, hello-
interval, dead-interval.
Bi-directional forwarding is enabled to allow the fastest convergence time if there is a failure with a peering neighbor.
To configure OSPF:
config router ospf
set router-id 10.10.10.10
set spf-timers 0 1
set distribute-list-in "pf-datacenter2-tunnel"
set restart-mode graceful-restart
config area
edit 10.10.10.10
next
end
config ospf-interface
edit "port5"
set interface "port5"
set dead-interval 3
set hello-interval 1
set bfd enable
next
end
config network
edit 1
set prefix 192.168.100.0 255.255.255.252
set area 10.10.10.10
next
end
FortiOS 6.4.2 Administration Guide 690
Fortinet Inc.
SD-WAN
config redistribute "connected"
set status enable
set routemap "redistribute-branch-tunnel"
end
config redistribute "static"
end
config redistribute "rip"
end
config redistribute "bgp"
set status enable
set routemap "redistribute-branch-networks"
end
config redistribute "isis"
end
end
Troubleshooting SD-WAN
The following topics provide instructions on SD-WAN troubleshooting:
l Tracking SD-WAN sessions on page 691
l Understanding SD-WAN related logs on page 691
l SD-WAN related diagnose commands on page 695
l SD-WAN bandwidth monitoring service on page 699
Tracking SD-WAN sessions
You can check the destination interface in Dashboard > FortiView Sessions in order to see which port the traffic is being
forwarded to.
The example below demonstrates a source-based load-balance between two SD-WAN members:
l If the source IP address is an even number, it will go to port13.
l If the source IP address is an odd number, it will go to port12.
Understanding SD-WAN related logs
This topic lists the SD-WAN related logs and explains when the logs will be triggered.
FortiOS 6.4.2 Administration Guide 691
Fortinet Inc.
SD-WAN
Health-check detects a failure:
l When health-check detects a failure, it will record a log:
34: date=2019-03-23 time=17:26:06 logid="0100022921" type="event" subtype="system"
level="critical" vd="root" eventtime=1553387165 logdesc="Routing information changed"
name="test" interface="R150" status="down" msg="Static route on interface R150 may be
removed by health-check test. Route: (10.100.1.2->10.100.2.22 ping-down)"
l When health-check detects a recovery, it will record a log:
32: date=2019-03-23 time=17:26:54 logid="0100022921" type="event" subtype="system"
level="critical" vd="root" eventtime=1553387214 logdesc="Routing information changed"
name="test" interface="R150" status="up" msg="Static route on interface R150 may be
added by health-check test. Route: (10.100.1.2->10.100.2.22 ping-up)"
Health-check has an SLA target and detects SLA qualification changes:
l When health-check has an SLA target and detects SLA changes, and changes to fail:
5: date=2019-04-11 time=11:48:39 logid="0100022923" type="event" subtype="system"
level="notice" vd="root" eventtime=1555008519816639290 logdesc="Virtual WAN Link status"
msg="SD-WAN Health Check(ping) SLA(1): number of pass members changes from 2 to 1."
l When health-check has an SLA target and detects SLA changes, and changes to pass:
2: date=2019-04-11 time=11:49:46 logid="0100022923" type="event" subtype="system"
level="notice" vd="root" eventtime=1555008586149038471 logdesc="Virtual WAN Link status"
msg="SD-WAN Health Check(ping) SLA(1): number of pass members changes from 1 to 2."
SD-WAN calculates a link's session/bandwidth over/under its ratio and stops/resumes traffic:
l When SD-WAN calculates a link's session/bandwidth over its configured ratio and stops forwarding traffic:
3: date=2019-04-10 time=17:15:40 logid="0100022924" type="event" subtype="system"
level="notice" vd="root" eventtime=1554941740185866628 logdesc="Virtual WAN Link volume
status" interface="R160" msg="The member(3) enters into conservative status with limited
ablity to receive new sessions for too much traffic."
l When SD-WAN calculates a link's session/bandwidth according to its ratio and resumes forwarding traffic:
1: date=2019-04-10 time=17:20:39 logid="0100022924" type="event" subtype="system"
level="notice" vd="root" eventtime=1554942040196041728 logdesc="Virtual WAN Link volume
status" interface="R160" msg="The member(3) resume normal status to receive new sessions
for internal adjustment."
The SLA mode service rule's SLA qualified member changes:
l When the SLA mode service rule's SLA qualified member changes. In this example R150 fails the SLA check, but is
still alive:
14: date=2019-03-23 time=17:44:12 logid="0100022923" type="event" subtype="system"
level="notice" vd="root" eventtime=1553388252 logdesc="Virtual WAN Link status"
msg="Service2() prioritized by SLA will be redirected in seq-num order 2(R160) 1(R150)."
15: date=2019-03-23 time=17:44:12 logid="0100022923" type="event" subtype="system"
level="notice" vd="root" eventtime=1553388252 logdesc="Virtual WAN Link status"
interface="R150" msg="The member1(R150) SLA order changed from 1 to 2. "
16: date=2019-03-23 time=17:44:12 logid="0100022923" type="event" subtype="system"
FortiOS 6.4.2 Administration Guide 692
Fortinet Inc.
SD-WAN
level="notice" vd="root" eventtime=1553388252 logdesc="Virtual WAN Link status"
interface="R160" msg="The member2(R160) SLA order changed from 2 to 1. "
l When the SLA mode service rule's SLA qualified member changes. In this example R150 changes from fail to pass:
1: date=2019-03-23 time=17:46:05 logid="0100022923" type="event" subtype="system"
level="notice" vd="root" eventtime=1553388365 logdesc="Virtual WAN Link status"
msg="Service2() prioritized by SLA will be redirected in seq-num order 1(R150) 2(R160)."
2: date=2019-03-23 time=17:46:05 logid="0100022923" type="event" subtype="system"
level="notice" vd="root" eventtime=1553388365 logdesc="Virtual WAN Link status"
interface="R160" msg="The member2(R160) SLA order changed from 1 to 2. "
3: date=2019-03-23 time=17:46:05 logid="0100022923" type="event" subtype="system"
level="notice" vd="root" eventtime=1553388365 logdesc="Virtual WAN Link status"
interface="R150" msg="The member1(R150) SLA order changed from 2 to 1. "
The priority mode service rule member's link status changes:
l When priority mode service rule member's link status changes. In this example R150 changes to better than R160,
and both are still alive:
1: date=2019-03-23 time=17:33:23 logid="0100022923" type="event" subtype="system"
level="notice" vd="root" eventtime=1553387603 logdesc="Virtual WAN Link status"
msg="Service2() prioritized by packet-loss will be redirected in seq-num order 1(R150) 2
(R160)."
2: date=2019-03-23 time=17:33:23 logid="0100022923" type="event" subtype="system"
level="notice" vd="root" eventtime=1553387603 logdesc="Virtual WAN Link status"
interface="R160" msg="The member2(R160) link quality packet-loss order changed from 1 to
2. "
3: date=2019-03-23 time=17:33:23 logid="0100022923" type="event" subtype="system"
level="notice" vd="root" eventtime=1553387603 logdesc="Virtual WAN Link status"
interface="R150" msg="The member1(R150) link quality packet-loss order changed from 2 to
1. "
l When priority mode service rule member's link status changes. In this example R160 changes to better than R150,
and both are still alive:
6: date=2019-03-23 time=17:32:01 logid="0100022923" type="event" subtype="system"
level="notice" vd="root" eventtime=1553387520 logdesc="Virtual WAN Link status"
msg="Service2() prioritized by packet-loss will be redirected in seq-num order 2(R160) 1
(R150)."
7: date=2019-03-23 time=17:32:01 logid="0100022923" type="event" subtype="system"
level="notice" vd="root" eventtime=1553387520 logdesc="Virtual WAN Link status"
interface="R150" msg="The member1(R150) link quality packet-loss order changed from 1 to
2. "
8: date=2019-03-23 time=17:32:01 logid="0100022923" type="event" subtype="system"
level="notice" vd="root" eventtime=1553387520 logdesc="Virtual WAN Link status"
interface="R160" msg="The member2(R160) link quality packet-loss order changed from 2 to
1. "
SD-WAN member is used in service and it fails the health-check:
l When SD-WAN member fails the health-check, it will stop forwarding traffic:
6: date=2019-04-11 time=13:33:21 logid="0100022923" type="event" subtype="system"
level="notice" vd="root" eventtime=1555014801844089814 logdesc="Virtual WAN Link status"
interface="R160" msg="The member2(R160) link is unreachable or miss threshold. Stop
forwarding traffic. "
FortiOS 6.4.2 Administration Guide 693
Fortinet Inc.
SD-WAN
l When SD-WAN member passes the health-check again, it will resume forwarding logs:
2: date=2019-04-11 time=13:33:36 logid="0100022923" type="event" subtype="system"
level="notice" vd="root" eventtime=1555014815914643626 logdesc="Virtual WAN Link status"
interface="R160" msg="The member2(R160) link is available. Start forwarding traffic. "
Load-balance mode service rule's SLA qualified member changes:
l When load-balance mode service rule's SLA qualified member changes. In this example R150 changes to not meet
SLA:
2: date=2019-04-11 time=14:11:16 logid="0100022923" type="event" subtype="system"
level="notice" vd="root" eventtime=1555017075926510687 logdesc="Virtual WAN Link status"
msg="Service1(rule2) will be load balanced among members 2(R160) with available
routing."
3: date=2019-04-11 time=14:11:16 logid="0100022923" type="event" subtype="system"
level="notice" vd="root" eventtime=1555017075926508676 logdesc="Virtual WAN Link status"
interface="R150" msg="The member1(R150) SLA order changed from 1 to 2. "
4: date=2019-04-11 time=14:11:16 logid="0100022923" type="event" subtype="system"
level="notice" vd="root" eventtime=1555017075926507182 logdesc="Virtual WAN Link status"
interface="R160" msg="The member2(R160) SLA order changed from 2 to 1. "
l When load-balance mode service rule's SLA qualified member changes. In this example R150 changes to meet
SLA:
1: date=2019-04-11 time=14:33:23 logid="0100022923" type="event" subtype="system"
level="notice" vd="root" eventtime=1555017075926510668 logdesc="Virtual WAN Link status"
msg="Service1(rule2) will be load balanced among members 1(R150) 2(R160) with available
routing."
2: date=2019-03-23 time=14:33:23 logid="0100022923" type="event" subtype="system"
level="notice" vd="root" eventtime=1553387603592651068 logdesc="Virtual WAN Link status"
interface="R160" msg="The member2(R160) link quality packet-loss order changed from 1 to
2. "
3: date=2019-03-23 time=14:33:23 logid="0100022923" type="event" subtype="system"
level="notice" vd="root" eventtime=1553387603592651068 logdesc="Virtual WAN Link status"
interface="R150" msg="The member1(R150) link quality packet-loss order changed from 2 to
1. "
SLA link status logs, generated with interval sla-fail-log-period or sla-pass-log-period:
l When SLA fails, SLA link status logs will be generated with interval sla-fail-log-period:
7: date=2019-03-23 time=17:45:54 logid="0100022925" type="event" subtype="system"
level="notice" vd="root" eventtime=1553388352 logdesc="Link monitor SLA information"
name="test" interface="R150" status="up" msg="Latency: 0.016, jitter: 0.002, packet
loss: 21.000%, inbandwidth: 0Mbps, outbandwidth: 200Mbps, bibandwidth: 200Mbps, sla_map:
0x0"
l When SLA passes, SLA link status logs will be generated with interval sla-pass-log-period:
5: date=2019-03-23 time=17:46:05 logid="0100022925" type="event" subtype="system"
level="information" vd="root" eventtime=1553388363 logdesc="Link monitor SLA
information" name="test" interface="R150" status="up" msg="Latency: 0.017, jitter:
0.003, packet loss: 0.000%, inbandwidth: 0Mbps, outbandwidth: 200Mbps, bibandwidth:
200Mbps, sla_map: 0x1"
FortiOS 6.4.2 Administration Guide 694
Fortinet Inc.
SD-WAN
SD-WAN related diagnose commands
This topic lists the SD-WAN related diagnose commands and related output.
To check SD-WAN health-check status:
FGT # diagnose sys sdwan health-check
Health Check(server):
Seq(1): state(alive), packet-loss(0.000%) latency(15.247), jitter(5.231) sla_map=0x0
Seq(2): state(alive), packet-loss(0.000%) latency(13.621), jitter(6.905) sla_map=0x0
FGT # diagnose sys sdwan health-check
Health Check(ping):
Seq(1): state(alive), packet-loss(0.000%) latency(0.683), jitter(0.082) sla_map=0x0
Seq(2): state(dead), packet-loss(100.000%) sla_map=0x0
FGT # diagnose sys sdwan health-check google
Health Check(google):
Seq(1): state(alive), packet-loss(0.000%) latency(14.563), jitter(4.334) sla_map=0x0
Seq(2): state(alive), packet-loss(0.000%) latency(12.633), jitter(6.265) sla_map=0x0
To check SD-WAN member status:
l When SD-WAN load-balance mode is source-ip-based/source-dest-ip-based.
FGT # diagnose sys sdwan member
Member(1): interface: port13, gateway: 10.100.1.1 2004:10:100:1::1, priority: 0, weight:
0
Member(2): interface: port15, gateway: 10.100.1.5 2004:10:100:1::5, priority: 0, weight:
0
l When SD-WAN load-balance mode is weight-based.
FGT # diagnose sys sdwan member
Member(1): interface: port13, gateway: 10.100.1.1 2004:10:100:1::1, priority: 0, weight:
33
Member(2): interface: port15, gateway: 10.100.1.5 2004:10:100:1::5, priority: 0, weight:
66
l When SD-WAN load-balance mode is measured-volume-based.
l Both members are under volume and still have room:
FGT # diagnose sys sdwan member
Member(1): interface: port13, gateway: 10.100.1.1 2004:10:100:1::1, priority: 0,
weight: 33
Config volume ratio: 33, last reading: 8211734579B, volume room 33MB
Member(2): interface: port15, gateway: 10.100.1.5 2004:10:100:1::5, priority: 0,
weight: 66
Config volume ratio: 66, last reading: 24548159B, volume room 66MB
l Some members are overloaded and some still have room:
FGT # diagnose sys sdwan member
Member(1): interface: port1, gateway: 10.10.0.2, priority: 0, weight: 0
Config volume ratio: 10, last reading: 10297221000B, overload volume 1433MB
Member(2): interface: port2, gateway: 10.11.0.2, priority: 0, weight: 38
Config volume ratio: 50, last reading: 45944239916B, volume room 38MB
FortiOS 6.4.2 Administration Guide 695
Fortinet Inc.
SD-WAN
l When SD-WAN load balance mode is usage-based/spillover.
l When no spillover occurs:
FGT # diagnose sys virtual-wan-link member
Member(1): interface: port13, gateway: 10.100.1.1 2004:10:100:1::1, priority: 0,
weight: 255
Egress-spillover-threshold: 400kbit/s, ingress-spillover-threshold: 300kbit/s
Egress-overbps=0, ingress-overbps=0
Member(2): interface: port15, gateway: 10.100.1.5 2004:10:100:1::5, priority: 0,
weight: 254
Egress-spillover-threshold: 0kbit/s, ingress-spillover-threshold: 0kbit/s
Egress-overbps=0, ingress-overbps=0
l When member has reached limit and spillover occurs:
FGT # diagnose sys sdwan member
Member(1): interface: port13, gateway: 10.100.1.1 2004:10:100:1::1, priority: 0,
weight: 255
Egress-spillover-threshold: 400kbit/s, ingress-spillover-threshold: 300kbit/s
Egress-overbps=1, ingress-overbps=1
Member(2): interface: port15, gateway: 10.100.1.5 2004:10:100:1::5, priority: 0,
weight: 254
Egress-spillover-threshold: 0kbit/s, ingress-spillover-threshold: 0kbit/s
Egress-overbps=0, ingress-overbps=0
l You can also use the diagnose netlink dstmac list command to check if you are over the limit.
FGT # diagnose netlink dstmac list port13
dev=port13 mac=08:5b:0e:ca:94:9d rx_tcp_mss=0 tx_tcp_mss=0 egress_overspill_
threshold=51200 egress_bytes=103710 egress_over_bps=1 ingress_overspill_
threshold=38400 ingress_bytes=76816 ingress_over_bps=1 sampler_rate=0
To check SD-WAN service rules status:
l Manual mode service rules.
FGT # diagnose sys sdwan service
Service(1): Address Mode(IPV4) flags=0x0
TOS(0x0/0x0), Protocol(0: 1->65535), Mode(manual)
Members:
1: Seq_num(2), alive, selected
Dst address: 10.100.21.0-10.100.21.255
l Auto mode service rules.
FGT # diagnose sys sdwan service
Service(1): Address Mode(IPV4) flags=0x0
TOS(0x0/0x0), Protocol(0: 1->65535), Mode(auto), link-cost-factor(latency), link-cost-
threshold(10), health-check(ping)
Members:
1: Seq_num(2), alive, latency: 0.011
2: Seq_num(1), alive, latency: 0.018, selected
Dst address: 10.100.21.0-10.100.21.255
l Priority mode service rules.
FGT # diagnose sys sdwan service
Service(1): Address Mode(IPV4) flags=0x0
TOS(0x0/0x0), Protocol(0: 1->65535), Mode(priority), link-cost-factor(latency), link-
FortiOS 6.4.2 Administration Guide 696
Fortinet Inc.
SD-WAN
cost-threshold(10), health-check(ping)
Members:
1: Seq_num(2), alive, latency: 0.011, selected
2: Seq_num(1), alive, latency: 0.017, selected
Dst address: 10.100.21.0-10.100.21.255
l Load-balance mode service rules.
FGT # diagnose sys sdwan service
Service(1): Address Mode(IPV4) flags=0x0
TOS(0x0/0x0), Protocol(0: 1->65535), Mode(load-balance)
Members:
1: Seq_num(1), alive, sla(0x1), num of pass(1), selected
2: Seq_num(2), alive, sla(0x1), num of pass(1), selected
Dst address: 10.100.21.0-10.100.21.255
l SLA mode service rules.
FGT # diagnose sys sdwan service
Service(1): Address Mode(IPV4) flags=0x0
TOS(0x0/0x0), Protocol(0: 1->65535), Mode(sla)
Members:
1: Seq_num(1), alive, sla(0x1), cfg_order(0), cost(0), selected
2: Seq_num(2), alive, sla(0x1), cfg_order(1), cost(0), selected
Dst address: 10.100.21.0-10.100.21.255
To check interface logs from the past 15 minutes:
FGT (root) # diagnose sys sdwan intf-sla-log R150
Timestamp: Fri Apr 12 11:08:36 2019, used inbandwidth: 0bps, used outbandwidth: 0bps, used
bibandwidth: 0bps, tx bytes: 860bytes, rx bytes: 1794bytes.
Timestamp: Fri Apr 12 11:08:46 2019, used inbandwidth: 1761bps, used outbandwidth: 1710bps,
used bibandwidth: 3471bps, tx bytes: 2998bytes, rx bytes: 3996bytes.
Timestamp: Fri Apr 12 11:08:56 2019, used inbandwidth: 2452bps, used outbandwidth: 2566bps,
used bibandwidth: 5018bps, tx bytes: 7275bytes, rx bytes: 7926bytes.
Timestamp: Fri Apr 12 11:09:06 2019, used inbandwidth: 2470bps, used outbandwidth: 3473bps,
used bibandwidth: 5943bps, tx bytes: 13886bytes, rx bytes: 11059bytes.
Timestamp: Fri Apr 12 11:09:16 2019, used inbandwidth: 2433bps, used outbandwidth: 3417bps,
used bibandwidth: 5850bps, tx bytes: 17946bytes, rx bytes: 13960bytes.
Timestamp: Fri Apr 12 11:09:26 2019, used inbandwidth: 2450bps, used outbandwidth: 3457bps,
used bibandwidth: 5907bps, tx bytes: 22468bytes, rx bytes: 17107bytes.
To check SLA logs in the past 10 minutes:
FGT (root) # diagnose sys sdwan sla-log ping 1
Timestamp: Fri Apr 12 11:09:27 2019, vdom root, health-check ping, interface: R150, status:
up, latency: 0.014, jitter: 0.003, packet loss: 16.000%.
Timestamp: Fri Apr 12 11:09:28 2019, vdom root, health-check ping, interface: R150, status:
up, latency: 0.015, jitter: 0.003, packet loss: 15.000%.
Timestamp: Fri Apr 12 11:09:28 2019, vdom root, health-check ping, interface: R150, status:
up, latency: 0.014, jitter: 0.003, packet loss: 14.000%.
Timestamp: Fri Apr 12 11:09:29 2019, vdom root, health-check ping, interface: R150, status:
up, latency: 0.015, jitter: 0.003, packet loss: 13.000%.
FortiOS 6.4.2 Administration Guide 697
Fortinet Inc.
SD-WAN
To check Application Control used in SD-WAN and the matching IP addresses:
FGT # diagnose sys sdwan internet-service-app-ctrl-list
Ctrl application(Microsoft.Authentication 41475):Internet Service ID(4294836224)
Protocol(6), Port(443)
Address(2): 104.42.72.21 131.253.61.96
Ctrl application(Microsoft.CDN 41470):Internet Service ID(4294836225)
Ctrl application(Microsoft.Lync 28554):Internet Service ID(4294836226)
Ctrl application(Microsoft.Office.365 33182):Internet Service ID(4294836227)
Ctrl application(Microsoft.Office.365.Portal 41468):Internet Service ID(4294836228)
Ctrl application(Microsoft.Office.Online 16177):Internet Service ID(4294836229)
Ctrl application(Microsoft.OneNote 40175):Internet Service ID(4294836230)
Ctrl application(Microsoft.Portal 41469):Internet Service ID(4294836231)
Protocol(6), Port(443)
Address(8): 23.58.134.172 131.253.33.200 23.58.135.29 204.79.197.200 64.4.54.254
23.59.156.241 13.77.170.218 13.107.22.200
Ctrl application(Microsoft.Sharepoint 16190):Internet Service ID(4294836232)
Ctrl application(Microsoft.Sway 41516):Internet Service ID(4294836233)
Ctrl application(Microsoft.Tenant.Namespace 41471):Internet Service ID(4294836234)
To check IPsec aggregate interface when SD-WAN uses the per-packet distribution feature:
# diagnose sys ipsec-aggregate list
agg1 algo=L3 member=2 run_tally=2
members:
vd1-p1
vd1-p2
To check BGP learned routes and determine if they are used in SD-WAN service:
FGT # get router info bgp network
FGT # get router info bgp network 10.100.11.0
BGP routing table entry for 10.100.10.0/24
Paths: (2 available, best 1, table Default-IP-Routing-Table)
Advertised to non peer-group peers:
172.10.22.2
20
10.100.20.2 from 10.100.20.2 (6.6.6.6)
Origin EGP metric 200, localpref 100, weight 10000, valid, external, best
Community: 30:5
Last update: Wen Mar 20 18:45:17 2019
FGT # get router info route-map-address
Extend-tag: 15, interface(wan2:16)
10.100.11.0/255.255.255.0
FGT # diagnose firewall proute list
list route policy info(vf=root):
id=4278779905 vwl_service=1(DataCenter) flags=0x0 tos=0x00 tos_mask=0x00 protocol=0
sport=0:65535 iif=0 dport=1-65535 oif=16
source wildcard(1): 0.0.0.0/0.0.0.0
destination wildcard(1): 10.100.11.0/255.255.255.0
FortiOS 6.4.2 Administration Guide 698
Fortinet Inc.
SD-WAN
SD-WAN bandwidth monitoring service
The bandwidth measuring tool is used to detect true upload and download speeds. Bandwidth tests can be run on
demand or automated using a script, and can be useful when configuring SD-WAN SLA and rules to balance SD-WAN
traffic.
The speed test tool requires a valid SD-WAN Bandwidth Monitoring Service license.
The speed test tool is compatible with iperf3.6 with SSL support. It can test the upload bandwidth to the FortiGate Cloud
speed test service. It can initiate the server connection and send download requests to the server. The tool can be run up
to 10 times a day .
FortiGate downloads the speed test server list. The list expires after 24 hours. One of the speed test servers is selected,
based on user input. The speed test runs, testing upload and download speeds. The test results are shown in the
command terminal.
To download the speed test server list:
# execute speed-test-server download
Download completed.
To check the speed test server list:
# execute speed-test-server list
AWS_West valid
Host: 34.210.67.183 5204 fortinet
Host: 34.210.67.183 5205 fortinet
Host: 34.210.67.183 5206 fortinet
Host: 34.210.67.183 5207 fortinet
Google_West valid
Host: 35.197.55.210 5204 fortinet
Host: 35.197.55.210 5205 fortinet
Host: 35.197.55.210 5206 fortinet
Host: 35.197.55.210 5207 fortinet
Host: 35.230.2.124 5204 fortinet
Host: 35.230.2.124 5205 fortinet
Host: 35.230.2.124 5206 fortinet
Host: 35.230.2.124 5207 fortinet
Host: 35.197.18.234 5204 fortinet
Host: 35.197.18.234 5205 fortinet
Host: 35.197.18.234 5206 fortinet
Host: 35.197.18.234 5207 fortinet
To run the speed test:
You can run the speed test without specifying a server. The system will automatically choose one server from the list and
run the speed test.
# execute speed-test auto
The license is valid to run speed test.
Speed test quota for 2/1 is 9
current vdom=root
Run in uploading mode.
Connecting to host 35.230.2.124, port 5206
[ 16] local 172.16.78.185 port 2475 connected to 35.230.2.124 port 5206
FortiOS 6.4.2 Administration Guide 699
Fortinet Inc.
SD-WAN
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 16] 0.00-1.01 sec 11.0 MBytes 91.4 Mbits/sec 0 486 KBytes
[ 16] 1.01-2.00 sec 11.6 MBytes 98.4 Mbits/sec 0 790 KBytes
[ 16] 2.00-3.01 sec 11.0 MBytes 91.6 Mbits/sec 15 543 KBytes
[ 16] 3.01-4.01 sec 11.2 MBytes 94.2 Mbits/sec 1 421 KBytes
[ 16] 4.01-5.01 sec 11.2 MBytes 93.5 Mbits/sec 0 461 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 16] 0.00-5.01 sec 56.1 MBytes 93.8 Mbits/sec 16 sender
[ 16] 0.00-5.06 sec 55.8 MBytes 92.6 Mbits/sec receiver
speed test Done.
Run in reverse downloading mode!
Connecting to host 35.230.2.124, port 5206
Reverse mode, remote host 35.230.2.124 is sending
[ 16] local 172.16.78.185 port 2477 connected to 35.230.2.124 port 5206
[ ID] Interval Transfer Bitrate
[ 16] 0.00-1.00 sec 10.9 MBytes 91.4 Mbits/sec
[ 16] 1.00-2.00 sec 11.2 MBytes 93.9 Mbits/sec
[ 16] 2.00-3.00 sec 11.2 MBytes 94.0 Mbits/sec
[ 16] 3.00-4.00 sec 11.2 MBytes 93.9 Mbits/sec
[ 16] 4.00-5.00 sec 10.9 MBytes 91.1 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 16] 0.00-5.03 sec 57.5 MBytes 95.9 Mbits/sec 40 sender
[ 16] 0.00-5.00 sec 55.4 MBytes 92.9 Mbits/sec receiver
speed test Done
To run the speed test on a server farm or data center:
# execute speed-test auto AWS_West
The license is valid to run speed test.
Speed test quota for 2/1 is 8
current vdom=root
Run in uploading mode.
Connecting to host 34.210.67.183, port 5205
To run the speed test on a local interface when there are multiple valid routes:
# execute speed-test port1 Google_West
The license is valid to run speed test.
Speed test quota for 2/1 is 6
bind to local ip 172.16.78.202
current vdom=root
Specified interface port1 does not comply with default outgoing interface port2 in routing
table!
Force to use the specified interface!
Run in uploading mode.
Connecting to host 35.197.18.234, port 5205
[ 11] local 172.16.78.202 port 20852 connected to 35.197.18.234 port 5205
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 11] 0.00-1.01 sec 10.7 MBytes 89.0 Mbits/sec 0 392 KBytes
[ 11] 1.01-2.01 sec 10.5 MBytes 88.5 Mbits/sec 1 379 KBytes
[ 11] 2.01-3.01 sec 11.3 MBytes 94.5 Mbits/sec 0 437 KBytes
[ 11] 3.01-4.01 sec 11.2 MBytes 94.3 Mbits/sec 0 478 KBytes
FortiOS 6.4.2 Administration Guide 700
Fortinet Inc.
SD-WAN
[ 11] 4.01-5.00 sec 11.3 MBytes 95.2 Mbits/sec 0 503 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 11] 0.00-5.00 sec 55.1 MBytes 92.3 Mbits/sec 1 sender
[ 11] 0.00-5.04 sec 54.5 MBytes 90.7 Mbits/sec receiver
speed test Done.
Run in reverse downloading mode!
Connecting to host 35.197.18.234, port 5205
Reverse mode, remote host 35.197.18.234 is sending
[ 11] local 172.16.78.202 port 20853 connected to 35.197.18.234 port 5205
[ ID] Interval Transfer Bitrate
[ 11] 0.00-1.00 sec 10.9 MBytes 91.1 Mbits/sec
[ 11] 1.00-2.00 sec 11.2 MBytes 94.0 Mbits/sec
[ 11] 2.00-3.00 sec 11.2 MBytes 94.0 Mbits/sec
[ 11] 3.00-4.00 sec 11.2 MBytes 94.0 Mbits/sec
[ 11] 4.00-5.00 sec 11.2 MBytes 94.0 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 11] 0.00-5.03 sec 57.4 MBytes 95.8 Mbits/sec 33 sender
[ 11] 0.00-5.00 sec 55.7 MBytes 93.4 Mbits/sec receiver
speed test Done.
To add a script to run a speed test automatically once every 24 hours:
config system auto-script
edit "speedtest"
set interval 86400
set repeat 0
set start auto
set script "
execute speed-test-server download
execute speed-test"
next
end
To view the results of the speed test script:
execute auto-script result speedtest
FortiOS 6.4.2 Administration Guide 701
Fortinet Inc.
System
This topic contains information about FortiGate administration and system configuration that you can do after installing
the FortiGate in your network.
Basic system settings
Administrators
By default, FortiGate has an administrator account with the username admin and no password. See Administrators on
page 704 for more information.
Administrator profiles
An administrator profile defines what the administrator can see and do on the FortiGate. See Administrator profiles on
page 704 for more information.
Password policy
Set up a password policy to enforce password criteria and change frequency. See Password policy on page 709 for
more information.
Interfaces
Physical and virtual interface allow traffic to flow between internal networks, and between the internet and internal
networks. See Interfaces on page 382 for more information.
Advanced system settings
SNMP
The simple network management protocol (SNMP) allows you to monitor hardware on your network. See SNMP on page
791 for more information.
DHCP server
You can configure one or more DHCP servers on any FortiGate interface. See DHCP server on page 484 for more
information.
FortiOS 6.4.2 Administration Guide 702
Fortinet Inc.
System
VDOM
You can use virtual domains (VDOMs) to divide a FortiGate into multiple virtual devices that function independently. See
Virtual Domains on page 729 for more information.
High availability
You can configure multiple FortiGate devices, including private and public cloud VMs, in HA mode. See High Availability
on page 751 for more information.
Certificates
You can manage certificates on the FortiGate. See Certificates on page 822 for more information.
Operating modes
A FortiGate or VDOM (in multi-vdom mode) can operate in either NAT/Route mode or Transparent mode.
NAT/Route mode
The FortiGate or VDOM is installed as a gateway between two networks, such as a private network and the internet. This
allows the FortiGate to hide the IP addresses on the private network using NAT. NAT/Route mode can also be used
when several ISPs are used for redundant internet connections.
By default, new VDOMs are set to NAT/Route operation mode.
See Configure VDOM-A on page 738 for more information.
Transparent mode
The FortiGate or VDOM is installed between the internal network and the router. The FortiGate does not changes any IP
addresses, and only applies security scanning to traffic. When you add a FortiGate that is in transparent mode to a
network, it only needs to be provided with a management IP address.
Transparent mode is primarily used when increased network protection is needed without changing the network
configuration.
See Configure VDOM-A on page 747 for more information.
To change the operating mode of a FortiGate or VDOM:
config system settings
set opmode {nat | transparent}
end
FortiOS 6.4.2 Administration Guide 703
Fortinet Inc.
System
Administrators
By default, FortiGate has an administrator account with the username admin and no password. To prevent unauthorized
access to the FortiGate, this account must be protected with a password. Additional administrators can be added for
various functions, each with a unique username, password, and set of access privileges.
The following topics provide information about administrators:
l Administrator profiles on page 704
l Add a local administrator on page 706
l Remote authentication for administrators on page 706
l Password policy on page 709
l Admin profile option for diagnose access on page 710
l SSO administrators on page 711
Administrator profiles
Administrator profiles define what the administrator can do when logged into the FortiGate. When you set up an
administrator account, you also assign an administrator profile which dictates what the administrator sees. Depending
on the nature of the administrator’s work, access level or seniority, you can allow them to view and configure as much or
as little as is required.
By default, the FortiGate has an admin administrator account that uses the super_admin profile.
super_admin profile
This profile has access to all components of FortiOS, including the ability to add and remove other system
administrators. For certain administrative functions, such as backing up and restoring the configuration, super_admin
access is required. To ensure that there is always a method to administer the FortiGate, the super_admin profile can't be
deleted or modified.
Lower level administrator profiles can't backup or restore the FortiOS configuration.
The super_admin profile is used by the default admin account. It is recommended that you add a password and rename
this account once you have set up your FortiGate. In order to rename the default account, a second admin account is
required.
Creating customized profiles
To create a profile in the GUI:
1. Go to System > Admin Profiles.
2. Select Create New.
FortiOS 6.4.2 Administration Guide 704
Fortinet Inc.
System
3. Configure the following settings:
l Name.
l Access permissions.
l Override idle timeout.
4. Select OK.
To create a profile in the CLI:
config system accprofile
edit "sample"
set secfabgrp read-write
set ftviewgrp read-write
set authgrp read-write
set sysgrp read-write
set netgrp read-write
set loggrp read-write
set fwgrp read-write
set vpngrp read-write
set utmgrp read-write
set wanoptgrp read-write
set wifi read-write
next
end
Edit profiles
To edit a profile in the GUI:
1. Go to System > Admin Profiles.
2. Choose the profile to be edited and select Edit.
3. Select OK to save any changes made.
To edit a profile in the CLI:
config system accprofile
edit "sample"
set secfabgrp read
next
end
Delete profiles
To delete a profile in the GUI:
1. Go to System > Admin Profiles.
2. Choose the profile to be deleted and select Delete.
3. Select OK.
FortiOS 6.4.2 Administration Guide 705
Fortinet Inc.
System
To delete a profile in the CLI:
config system accprofile
delete "sample"
end
Add a local administrator
By default, FortiGate has one super admin named admin. You can create more administrator accounts with different
privileges.
To create an administrator account in the GUI:
1. Go to System > Administrators.
2. Select Create New > Administrator.
3. Specify the Username.
Do not use the characters < > ( ) # " ' in the administrator username.
Using these characters in an administrator username might have a cross site scripting
(XSS) vulnerability.
4. Set Type to Local User.
5. Set the password and other fields.
6. Click OK.
To create an administrator account in the CLI:
config system admin
edit <admin_name>
set accprofile <profile_name>
set vdom <vdom_name>
set password <password for this admin>
next
end
Remote authentication for administrators
Administrators can use remote authentication, such as LDAP, to connect to the FortiGate.
Setting up remote authentication for administrators includes the following steps:
1. Configure the LDAP server on page 707
2. Add the LDAP server to a user group on page 707
3. Configure the administrator account on page 707
FortiOS 6.4.2 Administration Guide 706
Fortinet Inc.
System
Configure the LDAP server
To configure the LDAP server in the GUI:
1. Go to User & Authentication > LDAP Servers and select Create New.
2. Enter the server Name, Server IP address or Name.
3. Enter the Common Name Identifier and Distinguished Name.
4. Set the Bind Type to Regular and enter the Username and Password.
5. Click OK.
To configure the LDAP server in the CLI:
config user ldap
edit <ldap_server_name>
set server <server_ip>
set cnid "cn"
set dn "dc=XYZ,dc=fortinet,dc=COM"
set type regular
set username "cn=Administrator,dc=XYA, dc=COM"
set password <password>
next
end
Add the LDAP server to a user group
After configuring the LDAP server, create a user group that includes that LDAP server.
To create a user group in the GUI:
1. Go to User & Authentication > User Groups and select Create New.
2. Enter a Name for the group.
3. In the Remote groups section, select Create New.
4. Select the Remote Server from the dropdown list.
5. Click OK.
To create a user group in the CLI:
config user group
edit <Group_name>
set member "ldap_server_name"
next
end
Configure the administrator account
After configuring the LDAP server and adding it to a user group, create a new administrator. For this administrator,
instead of entering a password, use the new user group and the wildcard option for authentication.
FortiOS 6.4.2 Administration Guide 707
Fortinet Inc.
System
To create an administrator in the GUI:
1. Go to System > Administrators.
2. Select Create New > Administrator.
3. Specify the Username.
4. Set Type to Match a user on a remote server group.
5. In Remote User Group, select the user group you created.
6. Select Wildcard.
The Wildcard option allows LDAP users to connect as this administrator.
7. Select an Administrator Profile.
8. Click OK.
To create an administrator in the CLI:
config system admin
edit <admin_name>
set remote-auth enable
set accprofile super_admin
set wild card enable
set remote-group ldap
end
Other methods of administrator authentication
Administrator accounts can use different methods for authentication, including RADIUS, TACACS+, and PKI.
RADIUS authentication for administrators
To use a RADIUS server to authenticate administrators, you must:
l Configure the FortiGate to access the RADIUS server.
l Create the RADIUS user group.
l Configure an administrator to authenticate with a RADIUS server.
TACACS+ authentication for administrators
To use a TACACS+ server to authenticate administrators, you must:
l Configure the FortiGate to access the TACACS+ server.
l Create a TACACS+ user group.
l Configure an administrator to authenticate with a TACACS+ server.
PKI certificate authentication for administrators
To use PKI authentication for an administrator, you must:
l Configure a PKI user.
l Create a PKI user group.
l Configure an administrator to authenticate with a PKI certificate.
FortiOS 6.4.2 Administration Guide 708
Fortinet Inc.
System
Password policy
Brute force password software can launch more than just dictionary attacks. It can discover common passwords where a
letter is replaced by a number. For example, if p4ssw0rd is used as a password, it can be cracked.
Using secure passwords is vital for preventing unauthorized access to your FortiGate. When changing the password,
consider the following to ensure better security:
l Do not use passwords that are obvious, such as the company name, administrator names, or other obvious words
or phrases.
l Use numbers in place of letters, for example: passw0rd.
l Administrator passwords can be up to 64 characters.
l Include a mixture of numbers, symbols, and upper and lower case letters.
l Use multiple words together, or possibly even a sentence, for example: correcthorsebatterystaple.
l Use a password generator.
l Change the password regularly and always make the new password unique and not a variation of the existing
password. for example, do not change from password to password1.
l Make note of the password and store it in a safe place away from the management computer, in case you forget it;
or ensure at least two people know the password in the event one person becomes unavailable. Alternatively, have
two different admin logins.
FortiGate allows you to create a password policy for administrators and IPsec pre-shared keys. With this policy, you can
enforce regular changes and specific criteria for a password policy, including:
l Minimum length between 8 and 64 characters.
l If the password must contain uppercase (A, B, C) and/or lowercase (a, b, c) characters.
l If the password must contain numbers (1, 2, 3).
l If the password must contain special or non-alphanumeric characters (!, @, #, $, %, ^, &, *, (, and )).
l Where the password applies (admin or IPsec or both).
l The duration of the password before a new one must be specified.
If you add a password policy or change the requirements on an existing policy, the next time that administrator logs into
the FortiGate, the administrator is prompted to update the password to meet the new requirements before proceeding to
log in.
For information about setting passwords, see Default administrator password on page 721.
To create a system password policy the GUI:
1. Go to System > Settings.
2. In the Password Policy section, change the Password scope to Admin, IPsec, or Both.
3. Configure the password policy options.
4. Click Apply.
To create a system password policy the CLI:
config system password-policy
set status {enable | disable}
set apply-to {admin-password | ipsec-preshared-key}
set minimum-length <8-128>
set min-lower-case-letter <0-128>
set min-upper-case-letter <0-128>
FortiOS 6.4.2 Administration Guide 709
Fortinet Inc.
System
set min-non-alphanumeric <0-128>
set min-number <0-128>
set change-4-characters {enable | disable}
set expire-status {enable | disable}
set expire-day <1-999>
set reuse-password {enable | disable}
end
Admin profile option for diagnose access
The system-diagnostics command in an administrator profile can be used to control access to diagnose commands
for global and VDOM level administrators.
To block an administrator's access to diagnose commands:
1. Create an admin profile that cannot access diagnose commands:
config system accprofile
edit "nodiagnose"
...
set system-diagnostics disable
next
end
2. Apply the profile to an administrator:
config system admin
edit "nodiag"
set accprofile "nodiagnose"
set vdom "root"
set password ********
next
end
3. Log in as that administrator and confirm that they cannot access diagnose commands:
$ ?
config Configure object.
get Get dynamic and system information.
show Show configuration.
execute Execute static commands.
alias Execute alias commands.
exit Exit the CLI.
Associating a FortiToken to an administrator account
You can also associate FortiTokens with administrator accounts.
To associate a FortiToken to an administrator account using the GUI:
1. Ensure that you have successfully added your FortiToken serial number to FortiOS and that its status is Available.
2. Go to System > Administrators. Edit the admin account. This example assumes that the account is fully configured
except for two-factor authentication.
3. Enable Two-factor Authentication.
FortiOS 6.4.2 Administration Guide 710
Fortinet Inc.
System
4. From the Token dropdown list, select the desired FortiToken serial number.
5. In the Email Address field, enter the administrator's email address.
6. Click OK.
For a mobile token, click Send Activation Code to send the activation code to the configured
email address. The admin uses this code to activate their mobile token. You must have
configured an email service in System > Settings to send the activation code.
To associate a FortiToken to an administrator account using the CLI:
config system admin
edit <username>
set password "myPassword"
set two-factor fortitoken
set fortitoken <serial_number>
set email-to "[email protected]"
next
end
The fortitoken keyword is not visible until you select fortitoken for the two-factor option.
Before you can use a new FortiToken, you may need to synchronize it due to clock drift.
SSO administrators
SSO administrators are automatically created when the FortiGate acts as a SAML service provider (SP) with SAML
Single Sign-On enabled in the Security Fabric settings.
On the system login page, an administrator can log in with their username and password against the root FortiGate
acting as the identity provider (IdP) in the Security Fabric. After the first successful login, this user is added to the
administrators table (System > Administrators under Single Sign-On Administrator). The default profile selected is based
on the SP settings (Default admin profile). See Configuring a downstream FortiGate as an SP on page 199 for more
information.
SSO administrators can be manually configured in FortiOS.
FortiOS 6.4.2 Administration Guide 711
Fortinet Inc.
System
To manually configure an SSO administrator:
1. Go to System > Administrators and click Create New > SSO Admin.
2. Enter the username.
3. Select an administrator profile.
4. Click OK.
Firmware
Fortinet periodically updates the FortiGate firmware to include new features and resolve important issues. After you have
registered your FortiGate unit, firmware updates can be downloaded from the Fortinet Customer Service & Support
website.
Always back up the current configuration before installing new firmware. See Configuration
backups on page 53.
Before you install any new firmware, follow the below steps:
1. Review the Release Notes for a new firmware release.
2. Review the Supported Upgrade Paths.
3. Download a copy of the currently installed firmware, in case you need to revert to it. See Downloading a firmware
image on page 713 and Downgrading to a previous firmware version on page 717 for details.
4. Have a plan in place in case there is a critical failure, such as the FortiGate not coming back online after the update.
This could include having console access to the device (Connecting to the CLI on page 24), ensuring that you TFTP
server is working (Installing firmware from system reboot on page 718), and preparing a USB drive (Restoring from
a USB drive on page 719).
5. Backup the current configuration, including local certificates. See Configuration backups on page 53 for details.
6. Test the new firmware until you are satisfied that it applies to your configuration. See Testing a firmware version on
page 715 and Controlled upgrade on page 720 for details.
Installing new firmware without reviewing release notes or testing the firmware may result in changes to settings and
unexpected issues.
Only FortiGate admin users and administrators whose access profiles contain system read
and write privileges can change the FortiGate firmware.
Firmware upgrade notifications
FortiGates with a firmware upgrade license that are connected to FortiGuard display upgrade notifications in the setup
window, banner, and FortiGuard menu. The firmware notifications are enabled by default.
FortiOS 6.4.2 Administration Guide 712
Fortinet Inc.
System
To configure firmware notifications in the CLI:
config system global
set gui-firmware-upgrade-warning {enable | disable}
end
To use the firmware upgrade notifications in the GUI:
1. When you log in to FortiGate, the FortiGate Setup window includes an Upgrade firmware step. Click Begin.
2. Follow the steps in the Setup Progress, then click Review Firmware Upgrade.
The System > Firmware page opens.
3. Notifications appear below the Notification icon in the banner, and beside Firmware in the tree menu.
Downloading a firmware image
Firmware images for all FortiGate units are available on the Fortinet Customer Service & Support website.
To download firmware:
1. Log into the support site with your user name and password.
2. Go to Download > Firmware Images.
A list of Release Notes is shown. If you have not already done so, download and review the Release Notes for the
firmware version that you are upgrading your FortiGate unit to.
3. Select the Download tab.
4. Navigate to the folder for the firmware version that you are upgrading to.
FortiOS 6.4.2 Administration Guide 713
Fortinet Inc.
System
5. Find your device model from the list. FortiWiFi devices have file names that start with FWF.
6. Click HTTPS in the far right column to download the firmware image to your computer.
Firmware can also be downloaded using FTP, but as FTP is not an encrypted file transferring
protocol, HTTPS downloading is recommended.
FortiOS image signing and verification
Official FortiOS firmware images are signed by the Fortinet CA. The BIOS checks the validity of an image when it is
uploaded to the device. If the image is not signed by the Fortinet CA, a warning message is shown in the GUI.
Unsigned image:
Signed image:
This functionality is implemented on the following devices:
FortiOS 6.4.2 Administration Guide 714
Fortinet Inc.
System
FortiGate 40F FortiWiFi 41F FortiGate 100F FortiGate 3400E
FortiGate 40F-3G4G FortiWiFi 41F-3G4G FortiGate 101F FortiGate 3401E
FortiGate 41F FortiGate 60F FortiGate 400E FortiGate 3600E
FortiGate 41F-3G4G FortiGate 61F FortiGate 401E FortiGate 3601E
FortiWiFi 40F FortiWiFi 60F FortiGate 600E
FortiWiFi 40F-3G4G FortiWiFi 61F FortiGate 601E
Testing a firmware version
The integrity of firmware images downloaded from Fortinet's support portal can be verified using a file checksum. A file
checksum that does not match the expected value indicates a corrupt file. The corruption could be caused by errors in
transfer or by file modification. A list of expected checksum values for each build of released code is available on
Fortinet’s support portal.
Image integrity is also verified when the FortiGate is booting up. This integrity check is done through a cyclic redundancy
check (CRC). If the CRC fails, the FortiGate unit will encounter an error during the boot process.
Firmware images are signed and the signature is attached to the code as it is built. When upgrading an image, the
running OS will generate a signature and compare it with the signature attached to the image. If the signatures do not
match, the new OS will not load.
Testing before installation
FortiOS lets you test a new firmware image by installing the firmware image from a system reboot and saving it to system
memory. After completing this procedure, the FortiGate unit operates using the new firmware image with the current
configuration. The new firmware image is not permanently installed. The next time the FortiGate unit restarts, it operates
with the originally installed firmware image using the current configuration. If the new firmware image operates
successfully, you can install it permanently using the procedure explained in Upgrading the firmware.
For this procedure, you must install a TFTP server that you can connect to from the FortiGate internal interface. The
TFTP server should be on the same subnet as the internal interface.
To test the new firmware version:
1. Connect to the CLI using an RJ-45 to USB (or DB-9) or null modem cable.
2. Ensure that the TFTP server is running.
3. Copy the new firmware image file to the root directory on the TFTP server.
4. Ensure that the FortiGate unit can connect to the TFTP server using the execute ping command.
5. Restart the FortiGate unit: execute reboot. The following message is shown:
This operation will reboot the system!
Do you want to continue? (y/n)
6. Type y. As the FortiGate unit starts, a series of system startup messages appears.
7. When the following messages appears:
Press any key to display configuration menu..........
Immediately press any key to interrupt the system startup.
You have only three seconds to press any key. If you do not press a key during this time, the FortiGate will reboot,
and you will have to log in and repeat the execute reboot command.
FortiOS 6.4.2 Administration Guide 715
Fortinet Inc.
System
If you successfully interrupt the startup process, the following messages appears:
[G]: Get firmware image from TFTP server.
[F]: Format boot device.
[B]: Boot with backup firmware and set as default
[C]: Configuration and information
[Q]: Quit menu and continue to boot with default firmware.
[H]: Display this list of options.
Enter G, F, Q, or H:
8. Type G to get the new firmware image from the TFTP server. The following message appears: Enter TFTP
server address [192.168.1.168]:
9. Type the address of the TFTP server, then press Enter. The following message appears: Enter Local Address
[192.168.1.188]:
10. Type the IP address of the FortiGate unit to connect to the TFTP server.
The IP address must be on the same network as the TFTP server.
Make sure that you do not enter the IP address of another device on this network.
The following message appears:
Enter File Name [image.out]:
11. Enter the firmware image file name then press Enter. The TFTP server uploads the firmware image file to the
FortiGate unit and the following message appears:
Save as Default firmware/Backup firmware/Run image without saving: [D/B/R]
12. Type R. The FortiGate image is installed to system memory and the FortiGate unit starts running the new firmware
image, but with its current configuration.
Test the new firmware image as required. When done testing, reboot the FortiGate unit, and the it will resume using the
firmware that was running before you installed the test firmware.
Upgrading the firmware
Installing a new firmware image replaces the current antivirus and attack definitions, along with the definitions included
with the firmware release that is being installing. After you install new firmware, make sure that the antivirus and attack
definitions are up to date.
Back up your configuration before making any firmware changes.
To upgrade the firmware in the GUI:
1. Log into the FortiGate GUI as the admin administrative user.
2. Go to System > Firmware.
3. Under Upload Firmware, click Browse and locate the previously downloaded firmware image file (see Downloading
a firmware image on page 713).
4. Click Backup config and upgrade.
The FortiGate unit backs up the current configuration to the management computer, uploads the firmware image
file, upgrades to the new firmware version, and restarts. This process takes a few minutes.
FortiOS 6.4.2 Administration Guide 716
Fortinet Inc.
System
To upgrade the firmware in the CLI:
1. Make sure that the TFTP server is running.
2. Copy the new firmware image file to the root directory of the TFTP server.
3. Log into the CLI.
4. Ping the TFTP server to ensure that the FortiGate can connect to it:
execute ping <tftp_ipv4>
5. Enter the following command to copy the firmware image from the TFTP server to the FortiGate unit:
execute restore image tftp <filename> <tftp_ipv4>
The FortiGate unit responds with the message:
This operation will replace the current firmware version!
Do you want to continue? (y/n)
6. Type y. The FortiGate unit uploads the firmware image file, upgrades to the new firmware version, and restarts. This
process takes a few minutes.
7. Reconnect to the CLI.
8. Update the antivirus and attack definitions:
execute update-now
Downgrading to a previous firmware version
Downgrading the firmware is not recommended.
This procedure downgrades the FortiGate to a previous firmware version. The backup configuration might not be able to
be restored after downgrading.
To downgrade to a previous firmware version in the GUI:
1. Log into the FortiGate GUI as the admin administrative user.
2. Go to System > Firmware.
3. Under Upload Firmware, click Browse and locate the previously downloaded firmware image file (see Downloading
a firmware image on page 713).
4. Click Confirm version downgrade.
5. Click Backup config and downgrade.
The FortiGate unit backs up the current configuration to the management computer, uploads the firmware image
file, upgrades to the new firmware version, and restarts. This process takes a few minutes.
To downgrade to a previous firmware version in the CLI:
1. Make sure that the TFTP server is running.
2. Copy the new firmware image file to the root directory of the TFTP server.
3. Log into the CLI.
4. Ping the TFTP server to ensure that the FortiGate can connect to it:
execute ping <tftp_ipv4>
5. Enter the following command to copy the firmware image from the TFTP server to the FortiGate unit:
execute restore image tftp <filename> <tftp_ipv4>
FortiOS 6.4.2 Administration Guide 717
Fortinet Inc.
System
The FortiGate unit responds with the message:
This operation will replace the current firmware version!
Do you want to continue? (y/n)
6. Type y. The FortiGate unit uploads the firmware image file, then a message similar to the following is shown:
Get image from tftp server OK.
Check image OK.
This operation will downgrade the current firmware version!
Do you want to continue? (y/n)
7. Type y. The FortiGate unit downgrades to the old firmware version and restarts. This process takes a few minutes.
8. Reconnect to the CLI.
9. Update the antivirus and attack definitions:
execute update-now
Installing firmware from system reboot
In the event that the firmware upgrade does not load properly and the FortiGate unit will not boot, or continuously
reboots, it is best to perform a fresh install of the firmware from a reboot using the CLI. If configured, the firmware can
also be automatically installed from a USB drive; see Restoring from a USB drive on page 719 for details.
This procedure installs a firmware image and resets the FortiGate unit to factory default settings. You can use this
procedure to upgrade to a new firmware version, revert to an older firmware version, or re-install the current firmware.
To use this procedure, you must connect to the CLI using the FortiGate console port and a RJ-45 to USB (or DB-9), or
null modem cable. You must also install a TFTP server that you can connect to from the FortiGate internal interface. The
TFTP server should be on the same subnet as the internal interface.
Before beginning this procedure, ensure that you backup the FortiGate unit configuration. See Configuration backups on
page 53 for details. If you are reverting to a previous FortiOS version, you might not be able to restore the previous
configuration from the backup configuration file.
Installing firmware replaces your current antivirus and attack definitions, along with the definitions included with the
firmware release you are installing. After you install new firmware, make sure that antivirus and attack definitions are up
to date.
To install firmware from a system reboot:
1. Connect to the CLI using the RJ-45 to USB (or DB-9) or null modem cable.
2. Ensure that the TFTP server is running.
3. Copy the new firmware image file to the root directory of the TFTP server.
4. Ensure that the FortiGate unit can connect to the TFTP server using the execute ping command.
5. Restart the FortiGate unit: execute reboot. The following message is shown:
This operation will reboot the system!
Do you want to continue? (y/n)
6. Type y. As the FortiGate unit starts, a series of system startup messages appears.
7. When the following messages appears:
Press any key to display configuration menu..........
Immediately press any key to interrupt the system startup.
You have only three seconds to press any key. If you do not press a key during this time, the FortiGate will reboot,
and you will have to log in and repeat the execute reboot command.
If you successfully interrupt the startup process, the following messages appears:
FortiOS 6.4.2 Administration Guide 718
Fortinet Inc.
System
[C]: Configure TFTP parameters.
[R]: Review TFTP parameters.
[T]: Initiate TFTP firmware transfer.
[F]: Format boot device.
[I]: System information.
[B]: Boot with backup firmware and set as default.
[Q]: Quit menu and continue to boot.
[H]: Display this list of options.
Enter C,R,T,F,I,B,Q,or H:
8. If necessary, type C to configure the TFTP parameters, then type Q to return to the previous menu:
[P]: Set firmware download port.
[D]: Set DHCP mode.
[I]: Set local IP address.
[S]: Set local subnet mask.
[G]: Set local gateway.
[V]: Set local VLAN ID.
[T]: Set remote TFTP server IP address.
[F]: Set firmware file name.
[E]: Reset TFTP parameters to factory defaults.
[R]: Review TFTP parameters.
[N]: Diagnose networking(ping).
[Q]: Quit this menu.
[H]: Display this list of options.
Enter P,D,I,S,G,V,T,F,E,R,N,Q,or H:
The IP address must be on the same network as the TFTP server.
Make sure that you do not enter the IP address of another device on this network.
9. Type T get the new firmware image from the TFTP server.
The FortiGate unit loads the firmware.
10. Save the firmware as the default (D) or backup (B) firmware image, or run the image without saving it (R).
The FortiGate unit installs the new firmware image and restarts. The installation might take a few minutes to
complete.
Restoring from a USB drive
The FortiGate firmware can be manually restored from a USB drive, or installed automatically from a USB drive after a
reboot.
To restore the firmware from a USB drive:
1. Copy the firmware file to the root directory on the USB drive.
2. Connect the USB drive to the USB port of the FortiGate device.
3. Connect to the FortiGate CLI using the RJ-45 to USB (or DB-9) or null modem cable.
4. Enter the following command:
execute restore image usb <filename>
The FortiGate unit responds with the following message:
FortiOS 6.4.2 Administration Guide 719
Fortinet Inc.
System
This operation will replace the current firmware version! Do you want to continue?
(y/n)
5. Type y. The FortiGate unit restores the firmware and restarts. This process takes a few minutes.
6. Update the antivirus and attack definitions:
execute update-now
To install firmware automatically from a USB drive:
1. Go to System > Settings.
2. In the Start Up Settings section, enable Detect firmware and enter the name of the firmware file.
3. Copy the firmware file to the root directory on the USB drive.
4. Connect the USB drive to the USB port of the FortiGate device.
5. Reboot the FortiGate device.
Controlled upgrade
Using a controlled upgrade, you can upload a new version of the FortiOS firmware to a separate partition in the FortiGate
memory for later upgrade. The FortiGate unit can be configured so that when it is rebooted, it will automatically load the
new firmware. Using this option, you can stage multiple FortiGate units to upgrade simultaneously using FortiManager or
a script.
To load the firmware for later installation:
execute restore secondary-image {ftp | tftp | usb} <filename_str>
To set the FortiGate unit so that when it reboots, the new firmware is loaded:
execute set-next-reboot {primary | secondary}
where {primary | secondary} is the partition with the preloaded firmware.
Settings
The default administrator password should be configured immediately after the FortiGate is installed, see Default
administrator password on page 721.
After that, there are several system settings that should also be configured in System > Settings:
l Default administrator password on page 721
l Changing the host name on page 721
l Setting the system time on page 722
l Configuring ports on page 725
l Setting the idle timeout time on page 726
l Setting the password policy on page 726
l Changing the view settings on page 726
l Setting the administrator password retries and lockout time on page 727
l TLS configuration on page 728
FortiOS 6.4.2 Administration Guide 720
Fortinet Inc.
System
Default administrator password
By default, your FortiGate has an administrator account set up with the username admin and no password. In order to
prevent unauthorized access to the FortiGate, it is highly recommended that you add a password to this account.
In FortiOS 6.2.1 and later, adding a password to the admin administrator is mandatory. You
will be prompted to configured it the first time you log in to the FortiGate using that account,
after a factory reset, and after a new image installation.
To change the default password in the GUI:
1. Go to System > Administrators.
2. Edit the admin account.
3. Click Change Password.
4. If applicable, enter the current password in the Old Password field.
5. Enter a password in the New Password field, then enter it again in the Confirm Password field.
6. Click OK.
To change the default password in the CLI:
config system admin
edit admin
set password <password>
next
end
It is also recommended that you change the user name of this account; however, since you
cannot change the user name of an account that is currently in use, a second administrator
account must be created in order to do this.
Changing the host name
The FortiGate host name is shown in the Hostname field in the System Information widget on a dashboard, as the
command prompt in the CLI, as the SNMP system name, as the device name on FortiGate Cloud, and other places. If
the FortiGate is in an HA cluster, use a unique host name to distinguish it from the other devices in the cluster.
An administrator requires System > Configuration read/write access to edit the host name. See Administrator profiles on
page 704 for details.
To change the host name in the GUI:
1. Go to System > Settings.
2. In the Host name field, enter a new name.
3. Click Apply.
FortiOS 6.4.2 Administration Guide 721
Fortinet Inc.
System
To change the host name in the CLI:
config system global
set hostname <hostname>
end
Setting the system time
You can either manually set the FortiOS system time, or configure the device to automatically keep its system time
correct by synchronizing with a Network Time Protocol (NTP) server.
Daylight savings time is enabled by default, and can only be configured in the CLI.
For many features to work, including scheduling, logging, and SSL-dependent features, the
FortiOS system time must be accurate.
To configure the date and time in the GUI:
1. Go to System > Settings.
2. In the System Time section, configure the following settings to either manually set the time or use an NTP server:
Time Zone Select a time zone from the list. This should be the time zone that the
FortiGate is in.
Set Time Select to either Synchronize with an NTP Server, or use Manual settings.
Synchronize with To use an NTP server other than FortiGuard, the CLI must be used.
an NTP Server In the Sync interval field, enter how often, in minutes, that the device
synchronizes its time with the NTP server.
Manual settings Manually enter the Date, Hour (in 24-hour format), Minute, and Second in their
fields.
Setup device as local NTP Enable to configure the FortiGate as a local NTP server.
server In the Listen on Interfaces field, set the interface or interfaces that the
FortiGate will listen for NTP requests on.
3. Click Apply.
To configure the date and time in the CLI:
1. Configure the timezone and daylight savings time:
config system global
set timezone <integer>
set dst {enable | disable}
end
2. Either manually configure the date and time, or configure an NTP server:
Manual:
FortiOS 6.4.2 Administration Guide 722
Fortinet Inc.
System
execute date <yyyy-mm-dd>
execute time <hh:mm:ss>
NTP server:
config system ntp
set ntpsync enable
set type {fortiguard | custom}
set syncinterval <integer>
set source-ip <ip_address>
set source-ip6 <ip6_address>
set server-mode {enable | disable}
set interface <interface>
set authentication {enable | disable}
set key-type {MD5 | SHA1}
set key <password>
set key-id <integer>
config ntpserver
edit <server_id>
set server <ip_address or hostname>
set ntpv3 {enable | disable}
set authentication {enable | disable}
set key <password>
set key-id <integer>
next
end
end
SHA-1 authentication support (for NTPv4)
SHA-1 authentication support allows the NTP client to verify that severs are known and trusted and not intruders
masquerading (accidentally or intentionally) as legitimate servers. In cryptography, SHA-1 is a cryptographic hash
algorithmic function.
SHA-1 authentication support is only available for NTP clients, not NTP servers.
To configure authentication on a FortiGate NTP client:
config system ntp
set ntpsync enable
set type custom
set syncinterval 1
config ntpserver
edit "883502"
set server "10.1.100.11"
set authentication enable
set key
ENCi9NmcqsV3xBJvOkgIL3lFxA8mnNs2XKfB7spOQoUw4cm8FOOP0nrCbqx6rJ+om95+hVUHpaVZmepdd4KznPlAHNiu
liPgPOk
set key-id 1
next
FortiOS 6.4.2 Administration Guide 723
Fortinet Inc.
System
end
end
Command Description
authentication <enable | Enable/disable MD5/SHA1 authentication (default = disable).
disable>
key <passwd> Key for MD5/SHA1 authentication. Enter a password value.
key-id <integer> Key ID for authentication. Enter an integer value from 0 to 4294967295.
To confirm that NTP authentication is set up correctly:
# diagnose sys ntp status
synchronized: yes, ntpsync: enabled, server-mode: disabled
ipv4 server(10.1.100.11) 10.1.100.11 -- reachable(0xff) S:4 T:6 selected
server-version=4, stratum=3
If NTP authentication is set up correctly, the server version is equal to 4.
PTPv2
Precision time protocol (PTP) is used to synchronize network clocks. It is best suited to situations where time accuracy is
of the utmost importance, as it supports accuracy in the sub-microsecond range. Conversely, NTP accuracy is in the
range of milliseconds or tens of milliseconds.
The following CLI commands are available:
config system ptp
set status {enable | disable}
set mode {multicast | hybrid}
set delay-mechanism {E2E | P2P}
set request-interval <integer>
set interface <interface>
end
Command Description
status {enable | disable} Enable or disable the FortiGate system time by synchronizing with a PTP server
(default = disable).
mode {multicast | hybrid} Use multicast or hybrid transmission (default = multicast).
delay-mechanism {E2E | P2P} Use end-to-end (E2E) or peer-to-peer (P2P) delay detection (default = E2E).
request-interval <integer> The logarithmic mean interval between the delay request messages sent by the
client to the server in seconds (default = 1).
interface <interface> The interface that the PTP client will reply through.
Sample configuration
This example uses the following topology:
FortiOS 6.4.2 Administration Guide 724
Fortinet Inc.
System
To configure a FortiGate to act as a PTP client that synchronizes itself with a Linux PTP server:
1. Enable debug messages:
# diagnose debug application ptpd -1
This command will provide details to debug the PTP communication with the server.
2. Check the system date:
# execute date
current date is: 2020-01-01
3. Configure PTP in global mode:
config system ptp
set status enable
set interface wan2
end
4. Check the system date again after synchronization with the PTP server:
# execute date
current date is: 2020-01-14
Configuring ports
To improve security, the default ports for administrative connections to the FortiGate can be changed. Port numbers
must be unique. If a conflict exists with a particular port, a warning message is shown.
When connecting to the FortiGate after a port has been changed, the port number be included, for example:
https://192.168.1.99:100.
To configure the ports in the GUI:
1. Go to System > Settings.
2. In the Administration Settings section, set the HTTP, HTTPS, SSH, and Telnet ports.
3. Enable Redirect to HTTPS to prevent HTTP from being used by administrators.
4. Click Apply.
To configure the ports in the CLI:
config system global
set admin-port <port>
set admin-sport <port>
set admin-https-redirect {enable | disable}
set admin-ssh-port <port>
set admin-telnet-port <port>
end
Custom default service port range
FortiOS 6.4.2 Administration Guide 725
Fortinet Inc.
System
The default service port range can be customized using the following CLI command:
config system global
set default-service-source-port <port range>
end
Where <port range> is the new default service port range, that can have a minimum value of 0 and a maximum value
up to 65535. The default value is 1 to 65535.
This change effects the TCP/UDP protocol.
Setting the idle timeout time
The idle timeout period is the amount of time that an administrator will stay logged in to the GUI without any activity. This
is to prevent someone from accessing the FortiGate if the management PC is left unattended. By default, it is set to five
minutes.
A setting of higher than 15 minutes will have a negative effect on a security rating score. See
Security rating on page 214 for more information.
To change the idle timeout in the GUI:
1. Go to System > Settings.
2. In the Administration Settings section, set the Idle timeout to up to 480 minutes.
3. Click Apply.
To change the idle timeout in the CLI:
config system global
set admintimeout <integer>
end
Setting the password policy
A password policy can be created for administrators and IPsec pre-shared keys. See Password policy on page 709 for
information.
Changing the view settings
The view settings change the look and language of the FortiOS GUI.
FortiOS 6.4.2 Administration Guide 726
Fortinet Inc.
System
To change the view settings in the GUI:
1. Go to System > Settings.
2. In the View Settings section, configure the following settings:
Language Set the GUI language: English, French, Spanish, Portuguese, Japanese,
Traditional Chinese, Simplifies Chinese, Korean.
Lines per page Set the number of lines per page, from 20 to 100.
Theme Set the theme color: Green, Red, Blue, Melongene, or Mariner.
Date/Time Display Set the date and time to display using the FortiGate's or the browser's
timezone.
NGFW Mode Set the NGFW mode to either Profile-based (default) or Policy-based.
If Policy-based is selected, the SSL/SSH Inspection profile must be selected.
3. Click Apply.
To change the view settings in the CLI:
config system global
set language {english | french | spanish | portuguese | japanese | trach | simch |
korean}
set gui-lines-per-page <integer>
set gui-theme {green | red | blue | melongene | mariner}
set gui-date-time-source {system | browser}
end
config system settings
set ngfw-mode {profile-based | policy-based}
set ssl-ssh-profile {certificate-inspection | custom-deep-inspection | deep-inspection |
no-inspection}
end
Setting the administrator password retries and lockout time
By default, the number password retry attempts is set to three, allowing the administrator a maximum of three attempts
at logging in to their account before they are locked out for a set amount of time (by default, 60 seconds).
The number of attempts and the default wait time before the administrator can try to enter a password again can be
configured using the CLI.
A maximum of ten retry attempts can be configured, and the lockout period can be 1 to 2147483647 seconds (over 68
years). The higher the retry attempts, the higher the risk that someone might be able to guess the password.
To configure the lockout options:
config system global
set admin-lockout-threshold <failed_attempts>
set admin-lockout-duration <seconds>
end
For example, to set the number of retry attempts to 1, and the lockout time to 5 minutes:
FortiOS 6.4.2 Administration Guide 727
Fortinet Inc.
System
config system global
set admin-lockout-threshold 1
set admin-lockout-duration 300
end
If the time span between the first failed log in attempt and the lockout threshold failed attempt
is less than lockout time, the lockout will be triggered.
TLS configuration
The minimum TLS version that is used for local out connections from the FortiGate can be configured in the CLI:
config system global
set ssl-min-proto-version {SSLv3 | TLSv1 | TLSv1-1 | TLSv1-2 | TLSv1-3}
end
By default, the minimum version is TLSv1.2. The FortiGate will try to negotiate a connection using the configured version
or higher. If the server that FortiGate is connecting to does not support the version, then the connection will not be made.
Some FortiCloud and FortiGuard services do not support TLSv1.3.
Minimum SSL/TLS versions can also be configured individually for the following settings, not all of which support
TLSv1.3:
Setting CLI
Email server config system email-server
Certificate config vpn certificate setting
FortiSandbox config system fortisandbox
FortiGuard config log fortiguard setting
FortiAnalyzer config log fortianalyzer setting
Syslog config log syslogd setting
User Authentication config user setting
LDAP server config user ldap
POP3 server config user pop3
Exchange server config user exchange
A minimum (ssl-min-proto-ver) and a maximum (ssl-max-proto-ver) version can be configured for SSL VPN.
See TLS 1.3 support on page 1523
FortiOS 6.4.2 Administration Guide 728
Fortinet Inc.
System
Virtual Domains
Virtual Domains (VDOMs) are used to divide a FortiGate into two or more virtual units that function independently.
VDOMs can provide separate security policies and, in NAT mode, completely separate configurations for routing and
VPN services for each connected network.
There are two VDOM modes:
l Split-task VDOM mode: One VDOM is used only for management, and the other is used to manage traffic. See
Split-task VDOM mode on page 731.
l Multi VDOM mode: Multiple VDOMs can be created and managed as independent units. See Multi VDOM mode on
page 735.
By default, most FortiGate units support 10 VDOMs, and many FortiGate models support purchasing a license key to
increase the maximum number.
Global settings are configured outside of a VDOM. They effect the entire FortiGate, and include settings such as
interfaces, firmware, DNS, some logging and sandboxing options, and others. Global settings should only be changed
by top level administrators.
Enable the following to prevent accidentally creating VDOMs in the CLI:
config system global
set edit-vdom-prompt enable
end
The FortiGate displays a prompt to confirm before the VDOM is created.
Switching VDOM modes
Current VDOM mode New VDOM mode Rule
No VDOM Split-task VDOM Allowed
Split-task VDOM No VDOM Allowed
No VDOM Multi VDOM Allowed only if the FortiGate is not a member
of a Security Fabric. See Configuring the root
FortiGate and downstream FortiGates on
page 131 for more information.
Multi VDOM No VDOM Allowed
Split-task VDOM Multi VDOM Allowed only if the FortiGate is not a member
of a Security Fabric. See Configuring the root
FortiGate and downstream FortiGates on
page 131 for more information.
Multi VDOM Split-task VDOM Not Allowed. User must first switch to No
VDOM
FortiOS 6.4.2 Administration Guide 729
Fortinet Inc.
System
Global and per-VDOM resources
Global and per-VDOM resources can be configured when the FortiGate is in Split-Task or Multi VDOM mode. Global
resources apply to resources that are shared by the whole FortiGate, while per-VDOM resources are specific to each
VDOM.
By default, all per-VDOM resource settings are set to have no limits. This means that any single VDOM can use all of the
FortiGate device's resources. This could deprive other VDOMs of the resources that they require, to the point that could
be unable to function. We recommend settings maximum values on the resources that are vital to you.
To configure global resources:
1. In the Global VDOM, go to System > Global Resources.
2. Enable the resource's override in the Override Maximum column, then enter the override value.
3. Click Apply.
To reset the all of the override values, click Reset All.
To configure per-VDOM resources:
1. In the Global VDOM, go to System > VDOM.
2. Edit the VDOM whose resources need to be configured.
3. Enable the resource's override in the Override Maximum column, then enter the override value.
FortiOS 6.4.2 Administration Guide 730
Fortinet Inc.
System
4. Optionally, enter a value in the Guaranteed column.
5. Click OK.
To reset the all of the override values, click Reset All.
Split-task VDOM mode
In split-task VDOM mode, the FortiGate has two VDOMs: the management VDOM (root) and the traffic VDOM (FG-
traffic).
The management VDOM is used to manage the FortiGate, and cannot be used to process traffic.
The following GUI sections are available when in the management VDOM:
l The Status dashboard
l Security Fabric topology and settings (read-only, except for HTTP Service settings)
l Interface and static route configuration
l FortiClient configuration
l Replacement messages
l Certificates
l System events
l Log and email alert settings
l Threat weight definitions
The traffic VDOM provides separate security policies, and is used to process all network traffic.
The following GUI sections are available when in the traffic VDOM:
l The Status, Top Usage LAN/DMZ, and Security dashboards
l Security Fabric topology, settings (read-only, except for HTTP Service settings), and External Connectors
(Endpoint/Identity connectors only)
l FortiView
l Interface configuration
l Packet capture
l SD-WAN, SD-WAN Rules, and Performance SLA
FortiOS 6.4.2 Administration Guide 731
Fortinet Inc.
System
l Static and policy routes
l RIP, OSPF, BGP, and Multicast
l Replacement messages
l Feature visibility
l Tags
l Certificates
l Policies and objects
l Security profiles
l VPNs
l User and device authentication
l Wifi and switch controller
l Logging
l Monitoring
Split-task VDOM mode is not available on all FortiGate models. The Fortinet Security Fabric supports split-task VDOM
mode.
Enable split-task VDOM mode
Split-task VDOM mode can be enabled in the GUI or CLI. Enabling it does not require a reboot, but does log you out of
the FortiGate.
When split-task VDOM mode is enabled, all current management configuration is assigned to
the root VDOM, and all non-management settings, such as firewall policies and security
profiles, are deleted.
On FortiGate 60 series models and lower, VDOMs can only be enabled using the CLI.
FortiOS 6.4.2 Administration Guide 732
Fortinet Inc.
System
To enable split-task VDOM mode in the GUI:
1. On the FortiGate, go to System > Settings.
2. In the System Operation Settings section, enable Virtual Domains.
3. Select Split-Task VDOM for the VDOM mode.
4. Select a Dedicated Management Interface from the Interface list. This interface is used to access the management
VDOM, and cannot be used in firewall policies.
5. Click OK.
To enable split-task VDOM mode with the CLI:
config system global
set vdom-mode split-vdom
end
Assign interfaces to a VDOM
An interface can only be assigned to one of the VDOMs. When split-task VDOM mode is enabled, all interfaces are
assigned to the root VDOM. To use an interface in a policy, it must first be assigned to the traffic VDOM.
An interface cannot be moved if it is referenced in an existing configuration.
In the GUI, the interface list Ref. column shows if the interface is referenced in an existing
configuration, and allows you to quickly access and edit those references.
To assign an interface to a VDOM in the GUI:
1. On the FortiGate, go to Global > Network > Interfaces.
2. Edit the interface that will be assigned to a VDOM.
FortiOS 6.4.2 Administration Guide 733
Fortinet Inc.
System
3. Select the VDOM that the interface will be assigned to from the Virtual Domain list.
4. Click OK.
To assign an interface to a VDOM using the CLI:
config global
config system interface
edit <interface>
set vdom <VDOM_name>
next
end
end
Create per-VDOM administrators
Per-VDOM administrators can be created that can access only the management or traffic VDOM. These administrators
must use either the prof_admin administrator profile, or a custom profile.
A per-VDOM administrator can only access the FortiGate through a network interface that is assigned to the VDOM that
they are assigned to. The interface must also be configured to allow management access. They can also connect to the
FortiGate using the console port.
To assign an administrator to multiple VDOMs, they must be created at the global level. When creating an administrator
at the VDOM level, the super_admin administrator profile cannot be used.
To create a per-VDOM administrator in the GUI:
1. On the FortiGate, connect to the management VDOM.
2. Go to Global > System > Administrators and click Create New > Administrator.
3. Fill in the required information, setting the Type as Local User.
4. In the Virtual Domains field, add the VDOM that the administrator will be assigned to, and if necessary, remove the
other VDOM from the list.
FortiOS 6.4.2 Administration Guide 734
Fortinet Inc.
System
5. Click OK.
To create a per-VDOM administrator using the CLI:
config global
config system admin
edit <name>
set vdom <VDOM_name>
set password <password>
set accprofile <admin_profile>
...
next
end
end
Multi VDOM mode
In multi VDOM mode, the FortiGate can have multiple VDOMs that function as independent units. One VDOM is used to
manage global settings. The root VDOM cannot be deleted, and remains in the configuration even if it is not processing
any traffic.
Multi VDOM mode isn't available on all FortiGate models. The Fortinet Security Fabric does not support multi VDOM
mode.
There are three main configuration types in multi VDOM mode:
Independent VDOMs:
FortiOS 6.4.2 Administration Guide 735
Fortinet Inc.
System
Multiple, completely separate VDOMs are created. Any VDOM can be the management VDOM, as long as it has Internet
access. There are no inter-VDOM links, and each VDOM is independently managed.
Management VDOM:
A management VDOM is located between the other VDOMs and the Internet, and the other VDOMs connect to the
management VDOM with inter-VDOM links. The management VDOM has complete control over Internet access,
including the types of traffic that are allowed in both directions. This can improve security, as there is only one point of
ingress and egress.
There is no communication between the other VDOMs.
Meshed VDOMs:
VDOMs can communicate with inter-VDOM links. In full-mesh configurations, all the VDOMs are interconnected. In
partial-mesh configurations, only some of the VDOMs are interconnected.
In this configuration, proper security must be achieved by using firewall policies and ensuring secure account access for
administrators and users.
Multi VDOM configuration examples
The following examples show how to configure per-VDOM settings, such as operation mode, routing, and security
policies, in a network that includes the following VDOMs:
l VDOM-A: allows the internal network to access the Internet.
l VDOM-B: allows external connections to an FTP server.
l root: the management VDOM.
FortiOS 6.4.2 Administration Guide 736
Fortinet Inc.
System
You can use VDOMs in either NAT or transparent mode on the same FortiGate. By default, VDOMs operate in NAT
mode.
For both examples, multi VDOM mode must be enabled, and VDOM-A and VDOM-B must be created.
Enable multi VDOM mode
Multi VDOM mode can be enabled in the GUI or CLI. Enabling it does not require a reboot, but does log you out of the
device. The current configuration is assigned to the root VDOM.
On FortiGate 60 series models and lower, VDOMs can only be enabled using the CLI.
To enable multi VDOM mode in the GUI:
1. On the FortiGate, go to System > Settings.
2. In the System Operation Settings section, enable Virtual Domains.
3. Select Multi VDOM for the VDOM mode.
4. Click OK.
To enable multi VDOM mode with the CLI:
config system global
set vdom-mode multi-vdom
end
Create the VDOMs
To create the VDOMs in the GUI:
1. In the Global VDOM, go to System > VDOM, and click Create New. The New Virtual Domain page opens.
2. In the Virtual Domain field, enter VDOM-A.
FortiOS 6.4.2 Administration Guide 737
Fortinet Inc.
System
3. If required, set the NGFW Mode. If the NGFW Mode is Policy-based, select an SSL/SSH Inspection from the list.
4. Optionally, enter a comment.
5. Click OK to create the VDOM.
6. Repeat the above steps for VDOM-B.
To create the VDOMs with the CLI:
config vdom
edit <VDOM-A>
next
edit <VDOM-B>
next
end
end
NAT mode
In this example, both VDOM-A and VDOM-B use NAT mode. A VDOM link is created that allows users on the internal
network to access the FTP server.
This configuration requires the following steps:
1. Configure VDOM-A on page 738
2. Configure VDOM-B on page 740
3. Configure the VDOM link on page 743
Configure VDOM-A
VDOM-A allows connections from devices on the internal network to the Internet. WAN 1 and port 1 are assigned to this
VDOM.
The per-VDOM configuration for VDOM-A includes the following:
l A firewall address for the internal network
l A static route to the ISP gateway
l A security policy allowing the internal network to access the Internet
All procedures in this section require you to connect to VDOM-A, either using a global or per-VDOM administrator
account.
To add the firewall addresses in the GUI:
1. Go to Policy & Objects > Addresses and create a new address.
2. Enter the following information:
Name internal-network
Type Subnet
Subnet / IP Range 192.168.10.0/255.255.255.0
Interface port1
Show in Address List enabled
FortiOS 6.4.2 Administration Guide 738
Fortinet Inc.
System
To add the firewall addresses with the CLI:
config vdom
edit VDOM-A
config firewall address
edit internal-network
set associated-interface port1
set subnet 192.168.10.0 255.255.255.0
next
end
next
end
To add a default route in the GUI:
1. Go to Network > Static Routes and create a new route.
2. Enter the following information:
Destination Subnet
IP address 0.0.0.0/0.0.0.0
Gateway 172.20.201.7
Interface wan1
Distance 10
To add a default route with the CLI:
config vdom
edit VDOM-A
config router static
edit 0
set gateway 172.20.201.7
set device wan1
next
end
next
end
To add the security policy in the GUI:
1. Connect to VDOM-A.
2. Go to Policy & Objects > Firewall Policy and create a new policy.
3. Enter the following information:
Name VDOM-A-Internet
Incoming Interface port1
Outgoing Interface wan1
Source internal-network
FortiOS 6.4.2 Administration Guide 739
Fortinet Inc.
System
Destination all
Schedule always
Service ALL
Action ACCEPT
NAT enabled
To add the security policy with the CLI:
config vdom
edit VDOM-A
config firewall policy
edit 0
set name VDOM-A-Internet
set srcintf port1
set dstintf wan1
set srcaddr internal-network
set dstaddr all
set action accept
set schedule always
set service ALL
set nat enable
next
end
next
end
Configure VDOM-B
VDOM-B allows external connections to reach an internal FTP server. WAN 2 and port 2 are assigned to this VDOM.
The per-VDOM configuration for VDOM-B includes the following:
l A firewall address for the FTP server
l A virtual IP address for the FTP server
l A static route to the ISP gateway
l A security policy allowing external traffic to reach the FTP server
All procedures in this section require you to connect to VDOM-B, either using a global or per-VDOM administrator
account.
To add the firewall addresses in the GUI:
1. Go to Policy & Objects > Addresses and create a new address.
2. Enter the following information:
Address Name FTP-server
Type Subnet
FortiOS 6.4.2 Administration Guide 740
Fortinet Inc.
System
Subnet / IP Range 192.168.20.10/32
Interface port2
Show in Address List enabled
To add the firewall addresses with the CLI:
config vdom
edit VDOM-B
config firewall address
edit FTP-server
set associated-interface port2
set subnet 192.168.20.10 255.255.255.255
next
end
next
end
To add the virtual IP address in the GUI:
1. Go to Policy & Objects > Virtual IPs and create a new virtual IP address.
2. Enter the following information:
Name FTP-server-VIP
Interface wan2
External IP Address/Range 172.25.177.42
Internal IP Address/Range 192.168.20.10
To add the virtual IP address with the CLI:
config firewall vip
edit FTP-server-VIP
set extip 172.25.177.42
set extintf wan2
set mappedip 192.168.20.10
next
end
To add a default route in the GUI:
1. Go to Network > Static Routes and create a new route.
2. Enter the following information:
Destination Subnet
IP address 0.0.0.0/0.0.0.0
Gateway 172.20.10.10
Interface wan2
Distance 10
FortiOS 6.4.2 Administration Guide 741
Fortinet Inc.
System
To add a default route with the CLI:
config vdom
edit VDOM-B
config router static
edit 0
set device wan2
set gateway 172.20.10.10
next
end
next
end
To add the security policy in the GUI:
1. Go to Policy & Objects > Firewall Policy and create a new policy.
2. Enter the following information:
Name Access-server
Incoming Interface wan2
Outgoing Interface port2
Source all
Destination FTP-server-VIP
Schedule always
Service FTP
Action ACCEPT
NAT enabled
To add the security policy with the CLI:
config vdom
edit VDOM-B
config firewall policy
edit 0
set name Access-server
set srcintf wan2
set dstintf port2
set srcaddr all
set dstaddr FTP-server-VIP
set action accept
set schedule always
set service FTP
set nat enable
next
end
next
end
FortiOS 6.4.2 Administration Guide 742
Fortinet Inc.
System
Configure the VDOM link
The VDOM link allows connections from VDOM-A to VDOM-B. This allows users on the internal network to access the
FTP server through the FortiGate.
The configuration for the VDOM link includes the following:
l The VDOM link interface
l Firewall addresses for the FTP server on VDOM-A and for the internal network on VDOM-B
l Static routes for the FTP server on VDOM-A and for the internal network on VDOM-B
l Policies allowing traffic using the VDOM link
All procedures in this section require you to connect to the global VDOM using a global administrator account.
To add the VDOM link in the GUI:
1. Connect to root.
2. Go to Global > Network > Interfaces and select Create New > VDOM link.
3. Enter the following information:
Name VDOM-link
Interface 0
Virtual Domain VDOM-A
IP/Netmask 0.0.0.0/0.0.0.0
Interface 1
Virtual Domain VDOM-B
IP/Netmask 0.0.0.0/0.0.0.0
To add the VDOM link with the CLI:
config global
config system vdom-link
edit vlink
end
config system interface
edit VDOM-link0
set vdom VDOM-A
set ip 0.0.0.0 0.0.0.0
next
edit VDOM-link1
set vdom VDOM-B
set ip 0.0.0.0 0.0.0.0
next
end
end
To add the firewall address on VDOM-A in the GUI:
1. Connect to VDOM-A.
2. Go to Policy & Objects > Addresses and create a new address.
FortiOS 6.4.2 Administration Guide 743
Fortinet Inc.
System
3. Enter the following information:
Address Name FTP-server
Type Subnet
Subnet / IP Range 192.168.20.10/32
Interface VDOM-link0
Show in Address List enabled
Static Route Configuration enabled
To add the firewall addresses on VDOM-A with the CLI:
config vdom
edit VDOM-B
config firewall address
edit FTP-server
set associated-interface VDOM-link0
set allow-routing enable
set subnet 192.168.20.10 255.255.255.255
next
end
next
end
To add the static route on VDOM-A in the GUI:
1. Connect to VDOM-A.
2. Go to Network > Static Routes and create a new route.
3. Enter the following information:
Destination Named Address
Named Address FTP-server
Gateway 0.0.0.0
Interface VDOM-link0
To add the static route on VDOM-A with the CLI:
config vdom
edit VDOM-A
config router static
edit 0
set device VDOM-link0
set dstaddr FTP-server
next
end
next
end
FortiOS 6.4.2 Administration Guide 744
Fortinet Inc.
System
To add the security policy on VDOM-A in the GUI:
1. Connect to VDOM-A.
2. Go to Policy & Objects > Firewall Policy and create a new policy.
3. Enter the following information:
Name Access-FTP-server
Incoming Interface port1
Outgoing Interface VDOM-link0
Source internal-network
Destination FTP-server
Schedule always
Service FTP
Action ACCEPT
NAT disabled
To add the security policy on VDOM-A with the CLI:
config vdom
edit VDOM-A
config firewall policy
edit 0
set name Access-FTP-server
set srcintf port1
set dstintf VDOM-link0
set srcaddr internal-network
set dstaddr FTP-server
set action accept
set schedule always
set service FTP
next
end
next
end
To add the firewall address on VDOM-B in the GUI:
1. Connect to VDOM-B.
2. Go to Policy & Objects > Addresses and create a new address.
3. Enter the following information:
Address Name internal-network
Type Subnet
Subnet / IP Range 192.168.10.0/24
Interface VDOM-link1
FortiOS 6.4.2 Administration Guide 745
Fortinet Inc.
System
Show in Address List enabled
Static Route Configuration enabled
To add the firewall addresses on VDOM-B with the CLI:
config vdom
edit VDOM-B
config firewall address
edit internal-network
set associated-interface VDOM-link1
set allow-routing enable
set subnet 192.168.10.0 255.255.255.0
next
end
next
end
To add the static route on VDOM-B in the GUI:
1. Connect to VDOM-B.
2. Go to Network > Static Routes and create a new route.
3. Enter the following information:
Destination Named Address
Named Address internal-network
Gateway 0.0.0.0
Interface VDOM-link1
To add the static route on VDOM-B with the CLI:
config vdom
edit VDOM-B
config router static
edit 0
set device VDOM-link1
set dstaddr internal-network
next
end
next
end
To add the security policy on VDOM-B in the GUI:
1. Connect to VDOM-B.
2. Go to Policy & Objects > Firewall Policy and create a new policy.
3. Enter the following information:
Name Internal-server-access
FortiOS 6.4.2 Administration Guide 746
Fortinet Inc.
System
Incoming Interface VDOM-link1
Outgoing Interface port2
Source internal-network
Destination FTP-server
Schedule always
Service FTP
Action ACCEPT
NAT disabled
To add the security policy on VDOM-B with the CLI:
config vdom
edit VDOM-B
config firewall policy
edit 0
set name Internal-server-access
set srcintf VDOM-link1
set dstintf port2
set srcaddr internal-network
set dstaddr FTP-server
set action accept
set schedule always
set service FTP
next
end
next
end
NAT and transparent mode
In this example, VDOM-A uses NAT mode and VDOM-B uses transparent mode.
This configuration requires the following steps:
1. Configure VDOM-A on page 747
2. Configure VDOM-B on page 749
Configure VDOM-A
VDOM-A allows connections from devices on the internal network to the Internet. WAN 1 and port 1 are assigned to this
VDOM.
The per-VDOM configuration for VDOM-A includes the following:
l A firewall address for the internal network
l A static route to the ISP gateway
l A security policy allowing the internal network to access the Internet
FortiOS 6.4.2 Administration Guide 747
Fortinet Inc.
System
All procedures in this section require you to connect to VDOM-A, either using a global or per-VDOM administrator
account.
To add the firewall addresses in the GUI:
1. Go to Policy & Objects > Addresses and create a new address.
2. Enter the following information:
Name internal-network
Type Subnet
Subnet / IP Range 192.168.10.0/24
Interface port1
Show in Address List enabled
To add the firewall addresses with the CLI:
config vdom
edit VDOM-A
config firewall address
edit internal-network
set associated-interface port1
set subnet 192.168.10.0 255.255.255.0
next
end
next
end
To add a default route in the GUI:
1. Go to Network > Static Routes and create a new route.
2. Enter the following information:
Destination Subnet
IP address 0.0.0.0/0.0.0.0
Gateway 172.20.201.7
Interface wan1
Distance 10
To add a default route with the CLI:
config vdom
edit VDOM-A
config router static
edit 0
set gateway 172.20.201.7
set device wan1
next
end
next
FortiOS 6.4.2 Administration Guide 748
Fortinet Inc.
System
end
To add the security policy in the GUI:
1. Connect to VDOM-A.
2. Go to Policy & Objects > Firewall Policy and create a new policy.
3. Enter the following information:
Name VDOM-A-Internet
Incoming Interface port1
Outgoing Interface wan1
Source internal-network
Destination all
Schedule always
Service ALL
Action ACCEPT
NAT enabled
To add the security policy with the CLI:
config vdom
edit VDOM-A
config firewall policy
edit 0
set name VDOM-A-Internet
set srcintf port1
set dstintf wan1
set srcaddr internal-network
set dstaddr all
set action accept
set schedule always
set service ALL
set nat enable
next
end
next
end
Configure VDOM-B
VDOM-B allows external connections to reach an internal FTP server. WAN 2 and port 2 are assigned to this VDOM.
The per-VDOM configuration for VDOM-B includes the following:
l A firewall address for the FTP server
l A static route to the ISP gateway
l A security policy allowing external traffic to reach the FTP server
FortiOS 6.4.2 Administration Guide 749
Fortinet Inc.
System
All procedures in this section require you to connect to VDOM-B, either using a global or per-VDOM administrator
account.
To add the firewall addresses in the GUI:
1. Go to Policy & Objects > Addresses and create a new address.
2. Enter the following information:
Address Name FTP-server
Type Subnet
Subnet / IP Range 172.25.177.42/32
Interface port2
Show in Address List enabled
To add the firewall addresses with the CLI:
config vdom
edit VDOM-B
config firewall address
edit FTP-server
set associated-interface port2
set subnet 172.25.177.42 255.255.255.255
next
end
next
end
To add a default route in the GUI:
1. Go to Network > Routing Table and create a new route.
2. Enter the following information:
Destination Subnet
IP address 0.0.0.0/0.0.0.0
Gateway 172.20.10.10
To add a default route with the CLI:
config vdom
edit VDOM-B
config router static
edit 0
set gateway 172.20.10.10
next
end
next
end
FortiOS 6.4.2 Administration Guide 750
Fortinet Inc.
System
To add the security policy in the GUI:
1. Connect to VDOM-B.
2. Go to Policy & Objects > Firewall Policy and create a new policy.
3. Enter the following information:
Name Access-server
Incoming Interface wan2
Outgoing Interface port2
Source all
Destination FTP-server
Schedule always
Service FTP
Action ACCEPT
To add the security policy with the CLI:
config vdom
edit VDOM-B
config firewall policy
edit 0
set name Access-server
set srcintf wan2
set dstintf port2
set srcaddr all
set dstaddr FTP-server-VIP
set action accept
set schedule always
set service FTP
next
end
next
end
High Availability
The following sections provide instructions on configuring High Availability (HA):
l Introduction to the FGCP cluster on page 752
l Failover protection on page 753
l FGSP (session synchronization) peer setup on page 755
l UTM inspection on asymmetric traffic in FGSP on page 756
l UTM inspection on asymmetric traffic on L3 on page 758
l Encryption for L3 on asymmetric traffic in FGSP on page 760
l Synchronizing sessions between FGCP clusters on page 760
l Using standalone configuration synchronization on page 762
FortiOS 6.4.2 Administration Guide 751
Fortinet Inc.
System
l Troubleshoot an HA formation on page 764
l Check HA sync status on page 765
l Disabling stateful SCTP inspection on page 766
l Upgrading FortiGates in an HA cluster on page 767
l HA cluster setup examples on page 768
l HA between remote sites over managed FortiSwitches on page 777
l Routing data over the HA management interface on page 781
l Override FortiAnalyzer and syslog server settings on page 783
l Force HA failover for testing and demonstrations on page 787
l Querying autoscale clusters for FortiGate VM on page 790
Introduction to the FGCP cluster
High availability (HA) is usually required in a system where there is high demand for little downtime. There are usually
hot-swaps, backup routes, or standby backup units and as soon as the active entity fails, backup entities will start
functioning. This results in minimal interruption for the users.
The FortiGate Clustering Protocol (FGCP) is a proprietary HA solution whereby FortiGates can find other member
FortiGates to negotiate and create a cluster. A FortiGate HA cluster consists of at least two FortiGates (members)
configured for HA operation. All FortiGates in the cluster must be the same model and have the same firmware installed.
Cluster members must also have the same hardware configuration (such as the same number of hard disks). All cluster
members share the same configurations except for their host name and priority in the HA settings. The cluster works like
a device but always has a hot backup device.
Critical cluster components
The following are critical components in an HA cluster:
l Heartbeat connections: members will use this to communicate with each other. In general, a two-member cluster is
most common. We recommend double back-to-back heartbeat connections.
l Identical connections for internal and external interfaces: as demonstrated in the topology, we recommend similar
connections from each member to the switches for the cluster to function properly.
FortiOS 6.4.2 Administration Guide 752
Fortinet Inc.
System
General operation
The following are best practices for general cluster operation:
l Ensure that heartbeat communication is present.
l Enable the session synchronization option in daily operation (see FGSP (session synchronization) peer setup on
page 755).
l Monitor traffic flowing in and out of the interfaces.
Failover
FGCP provides failover protection in the following scenarios:
l The active device loses power.
l A monitored interface loses a connection.
After failover occurs, the user will not notice any difference, except that the active device has changed. See Failover
protection on page 753 for more information.
Synchronizing the configuration
FGCP uses a combination of incremental and periodic synchronization to make sure that the configuration of all cluster
units is synchronized to that of the primary unit.
The following settings are not synchronized between cluster units:
l The FortiGate host name
l GUI Dashboard widgets
l HA override
l HA device priority
l The virtual cluster priority
l The HA priority setting for a ping server (or dead gateway detection) configuration
l The system interface settings of the HA reserved management interface
l The HA default route for the reserved management interface, set using the ha-mgmt-interface-gateway
option of the config system ha command
Most subscriptions and licenses are not synchronized, as each FortiGate must be licensed individually. FortiToken
Mobile is an exception; they are registered to the primary unit and synchronized to the secondary units.
The primary unit synchronizes all other configuration settings, including the other HA configuration settings.
All synchronization activity takes place over the HA heartbeat link using TCP/703 and UDP/703 packets.
Failover protection
The FortiGate Clustering Protocol (FGCP) provides failover protection, meaning that a cluster can provide FortiGate
services even when one of the devices in the cluster encounters a problem that would result in the complete loss of
connectivity for a stand-alone FortiGate unit. Failover protection provides a backup mechanism that can be used to
reduce the risk of unexpected downtime, especially in mission-critical environments.
FGCP supports failover protection in three ways:
1. Link failover maintains traffic flow if a link fails.
2. If a device loses power, it automatically fails over to a backup unit with minimal impact on the network.
FortiOS 6.4.2 Administration Guide 753
Fortinet Inc.
System
3. Optionally, if an SSD fails, it can automatically fail over to a backup unit.
When session-pickup is enabled in the HA settings, existing TCP session are kept, and users on the network are not
impacted by downtime as the traffic can be passed without reestablishing the sessions.
When and how the failover happens
1. Link fails
Before triggering a failover when a link fails, the administrator must ensure that monitor interfaces are configured.
Normally, the internal interface that connects to the internal network, and an outgoing interface for traffic to the internet or
outside the network, should be monitored. Any of those links going down will trigger a failover.
2. Loss of power for active unit.
When an active (primary) unit loses power, a backup (secondary) unit automatically becomes the active, and the impact
on traffic is minimal. There are no settings for this kind of fail over.
3. SSD failure
HA failover can be triggered by an SSD failure.
To enable an SSD failure triggering HA fail over:
config system ha
set ssd-failover enable
end
FortiOS 6.4.2 Administration Guide 754
Fortinet Inc.
System
FGSP (session synchronization) peer setup
The FortiGate Session Life Support Protocol (FGSP) is a proprietary HA solution for only sharing sessions between two
entities and is based on a peer-to-peer structure. The entities could be standalone FortiGates or an FGCP cluster.
Connect all necessary interfaces as per the topology diagram below. Interfaces may be changed depending on the
models in use. Interface names in the topology diagram are for example purposes only.
To setup an FGSP peer through the CLI:
These instructions assume that the device has been connected to the console, the CLI is accessible, and that all
FortiGates have been factory reset.
1. Connect all necessary interfaces as per the topology diagram.
2. Enter the following command to change the FortiGate unit host name:
config system global
set hostname Example1_host(Example2_host, etc)
end
FortiOS 6.4.2 Administration Guide 755
Fortinet Inc.
System
3. On each FGSP peer device, enter the following command:
config system cluster-sync
set peerip xx.xx.xx.xx --->> peer's interface IP for session info to be
passed.
end
4. Set up identical firewall policies.
FGSP peers share the same session information which goes from the same incoming interface (example: port1) to
the outgoing interface (example: port2). Firewall policies should be identical as well, and can be copied from one
device to its peer.
To test the setup:
1. Initiate TCP traffic (like HTTP access) to go through FortiGateA.
2. Check the session information.
For example:
diagnose sys session filter src xxx.xxx.xxx.xxx (your PCs IP)
diagnose sys session list
3. Use the same command on FortiGateB to determine if the same session information appeared.
UTM inspection on asymmetric traffic in FGSP
When traffic passes asymmetrically through FGSP peers, UTM inspection can be supported by always forwarding traffic
back to the session owner for processing. The session owner is the FortiGate that receives the first packet of the
session.
In this example, traffic from the internal network first hits FGT_1, but the return traffic is routed to FGT_2. Consequently,
traffic bounces from FGT_2 port1 to FGT_1 port1 using FGT_1’s MAC address. Traffic is then inspected by FGT_1.
This example requires the following settings:
l The internal and outgoing interfaces of both FortiGates in the FGSP pair are in the same subnet.
l Both peers have layer 2 access with each other.
FortiOS 6.4.2 Administration Guide 756
Fortinet Inc.
System
To configure FTG_1:
1. Configure the cluster, setting the peer IP to the IP address of FGT_2:
config system cluster-sync
edit 1
set peerip 10.2.2.2
next
end
2. Configure FGSP cluster attributes:
config system standalone-cluster
set standalone-group-id 1
set group-member-id 0
set layer2-connection available
unset session-sync-dev
end
3. Configure the firewall policy:
config firewall policy
edit 1
set srcintf "port2"
set dstintf "port1"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set utm-status enable
set av-profile "default"
set logtraffic all
set nat enable
next
end
To configure FTG_2:
1. Configure the cluster, setting the peer IP to the IP address of FGT_1:
config system cluster-sync
edit 1
set peerip 10.2.2.1
next
end
2. Configure FGSP cluster attributes:
config system standalone-cluster
set standalone-group-id 1
set group-member-id 1
set layer2-connection available
unset session-sync-dev
end
FortiOS 6.4.2 Administration Guide 757
Fortinet Inc.
System
3. Configure the firewall policy:
config firewall policy
edit 1
set srcintf "port2"
set dstintf "port1"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set utm-status enable
set av-profile "default"
set logtraffic all
set nat enable
next
end
Results
Capture packets on FGT_2 to see that traffic bounced from FGT_2 to FGT_1 over the traffic interface.
FGT_2 # diagnose sniffer packet any 'host 10.1.100.15 and host 172.6.200.55' 4
interfaces=[any]
filters=[host 10.1.100.15 and host 172.16.200.55]
91.803816 port1 in 172.16.200.55.80 -> 10.1.100.15.40008: syn 2572073713 ack 261949279
92.800480 port1 in 172.16.200.55.80 -> 10.1.100.15.40008: syn 2572073713 ack 261949279
92.800486 port1 out 172.16.200.55.80 -> 10.1.100.15.40008: syn 2572073713 ack 261949279
92.800816 port1 in 172.16.200.55.80 -> 10.1.100.15.40008: syn 2572073713 ack 261949279
92.800818 port1 out 172.16.200.55.80 -> 10.1.100.15.40008: syn 2572073713 ack 261949279
UTM inspection on asymmetric traffic on L3
When traffic passes asymmetrically through FGSP peers, UTM inspection can be supported by always forwarding traffic
back to the session owner for processing. The session owner is the FortiGate that receives the first packet of the
session.
For networks where L2 connectivity is not available, such as cloud environments, traffic bound for the session owner are
forwarded through the peer interface using a UDP connection.
In this example, traffic from the internal network first hits FGT_1, but the return traffic is routed to FGT_2. Consequently,
return traffic is packed and sent from FGT_2 to FGT_1 using UDP encapsulation between two peer interfaces (port 3).
Traffic is then inspected by FGT_1.
FortiOS 6.4.2 Administration Guide 758
Fortinet Inc.
System
To configure FTG_1:
1. Configure the cluster, setting the peer IP to the IP address of FGT_2:
config system cluster-sync
edit 1
set peerip 10.2.2.2
next
end
2. Configure FGSP cluster attributes:
config system standalone-cluster
set standalone-group-id 1
set group-member-id 0
set layer2-connection unavailable
unset session-sync-dev
end
3. Configure the firewall policy:
config firewall policy
edit 1
set srcintf "port2"
set dstintf "port1"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set utm-status enable
set av-profile "default"
set logtraffic all
set nat enable
next
end
FortiOS 6.4.2 Administration Guide 759
Fortinet Inc.
System
To configure FTG_2:
1. Configure the cluster, setting the peer IP to the IP address of FGT_1:
config system cluster-sync
edit 1
set peerip 10.2.2.1
next
end
2. Configure FGSP cluster attributes:
config system standalone-cluster
set standalone-group-id 1
set group-member-id 1
set layer2-connection unavailable
unset session-sync-dev
end
3. Configure the firewall policy:
config firewall policy
edit 1
set srcintf "port2"
set dstintf "port1"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set utm-status enable
set av-profile "default"
set logtraffic all
set nat enable
next
end
Encryption for L3 on asymmetric traffic in FGSP
In scenarios where asymmetric routing between FGSP members occurs, the return traffic can be encrypted and routed
back to the session owner on Layer 3 (L3).
To encrypt L3 traffic in FGSP:
1. Run the following on both FortiGates:
config system standalone-cluster
set encryption enable
set psksecret xxxxxxxxx
end
Synchronizing sessions between FGCP clusters
Synchronizing sessions between FGCP clusters is useful when data centers in different locations are used for load-
balancing, and traffic must be shared and flow freely based on demand.
FortiOS 6.4.2 Administration Guide 760
Fortinet Inc.
System
There are some limitations when synchronizing sessions between FGCP clusters:
l All FortiGates must have the same model and generation, hardware configuration, and FortiOS version.
l Currently, a total of 16 clusters can share sessions.
To configure session synchronization between two clusters:
1. Configure the two clusters (see HA active-passive cluster setup on page 768 or HA active-active cluster setup on
page 770).
2. On cluster A, configure the peer IP for the interface:
config system interface
edit "port5"
set vdom "root"
set ip 10.10.10.1 255.255.255.0
set allowaccess ping https ssh snmp http telnet
next
end
In this example, cluster A uses port5 and its IP address, 10.10.10.1, is reachable from another cluster.
3. On cluster A, configure cluster and session synchronization:
config system cluster-sync
edit 1
set peerip 10.10.10.2
next
end
4. On cluster A, configure additional FGSP attributes as needed:
config system standalone-cluster
set standalone-group-id 1
set group-member-id 0
set session-sync-dev <interface>
end
The standalone-group-id must match between FGSP members. The group-member-id is unique for each
FGCP cluster. session-sync-dev is an optional command to specify the interfaces to sync sessions.
FortiOS 6.4.2 Administration Guide 761
Fortinet Inc.
System
5. On cluster B, configure the peer IP for the interface:
config system interface
edit "port5"
set vdom "root"
set ip 10.10.10.2 255.255.255.0
set allowaccess ping https ssh snmp http telnet
next
end
In this example, cluster B uses port5 and its IP address, 10.10.10.2, is reachable from another cluster.
6. On cluster B, configure cluster and session synchronization:
config system cluster-sync
edit 1
set peerip 10.10.10.1
next
end
7. On cluster B, configure additional FGSP attributes as needed:
config system standalone-cluster
set standalone-group-id 1
set group-member-id 1
set session-sync-dev <interface>
end
Using standalone configuration synchronization
You can configure synchronization from one standalone FortiGate to another standalone FortiGate (standalone-
config-sync). With the exception of some configurations that do not sync (settings that identify the FortiGate to the
network), the rest of the configurations are synced, such as firewall policies, firewall addresses, and UTM profiles.
This option is useful in situations when you need to set up FGSP peers, or when you want to quickly deploy several
FortiGates with the same configurations. You can set up standalone-config-sync for multiple members.
standalone-config-sync is an independent feature and should be used with caution as
there are some limitations. We recommend disabling it once the configurations have been
synced over.
Limitations
When standalone configuration synchronization is enabled, there are some limitations, including but not limited to the
following:
l Network interruptions occur during firmware upgrades: when upgrading the firmware, all members in the
standalone-config-sync group are upgraded simultaneously. This creates downtime if the FortiGates are the
only outgoing gateway in the network. We recommend disabling the option before upgrading firmware.
l Some unwanted configurations might be synced: the current design and implementation of standalone-config-
sync is based on requirements from specific customers. Thus, some users may find that unwanted parts of the
configurations are synced. Should this occur, we recommend disabling the option and modifying those
configurations manually.
l The wrong primary device might be selected accidentally: standalone-config-sync is derived from the HA
primary unit selection mechanism. All members in the group will join the selection process in the same way as a the
FortiOS 6.4.2 Administration Guide 762
Fortinet Inc.
System
HA cluster selection process. It is important to select the correct device as the primary, otherwise the wrong device
could be selected and existing configurations could be overwritten.
l Layer 2 heartbeat connections must be present: similar to HA heartbeat requirements, one or more layer 2
heartbeat connections are needed to sync configurations between the primary and secondary devices.
Setting up standalone configuration synchronization
Two or more standalone FortiGates should be connected to each other with one or more heartbeat interfaces, either
back-to-back or via a switch. In the following example, the device supplying the configurations is called "conf-prim," and
the devices receiving the configurations are called "conf-secos."
To set up standalone configuration synchronization:
1. Configure the conf-prim device for the group:
config system ha
set hbdev ha1 50 ha2 100
set priority 255
set override enable
set standalone-config-sync enable
end
2. Configure the conf-prim device as needed to be functional.
3. Configure the other group members as conf-secos:
config system ha
set standalone-config-sync enable
end
4. Wait 10–15 minutes for the configurations to sync over.
5. Verify the synchronization status:
# get system ha status
path=system, objname=ha, tablename=(null), size=5912
HA Health Status:
WARNING: FG201E4Q17900771 has hbdev down;
WARNING: FG201ETK19900991 has hbdev down;
Model: FortiGate-201E
Mode: ConfigSync
Group: 0
Debug: 0
Cluster Uptime: 0 days 0:0:51
Cluster state change time: 2019-09-03 17:46:07
Primary selected using:
<2019/09/03 17:46:07> FG201ETK19900991 is selected as the primary because it has the
largest value of override priority.
FortiOS 6.4.2 Administration Guide 763
Fortinet Inc.
System
ses_pickup: disable
override: disable
Configuration Status:
FG201E4Q17900771(updated 3 seconds ago): out-of-sync
FG201ETK19900991(updated 1 seconds ago): in-sync
System Usage stats:
FG201E4Q17900771(updated 3 seconds ago):
sessions=1, average-cpu-user/nice/system/idle=0%/0%/0%/100%, memory=16%
FG201ETK19900991(updated 1 seconds ago):
sessions=1, average-cpu-user/nice/system/idle=0%/0%/0%/100%, memory=16%
HBDEV stats:
FG201E4Q17900771(updated 3 seconds ago):
wan2: physical/1000auto, up, rx-bytes/packets/dropped/errors=114918/266/0/0,
tx=76752/178/0/0
ha: physical/00, down, rx-bytes/packets/dropped/errors=0/0/0/0, tx=0/0/0/0
FG201ETK19900991(updated 1 seconds ago):
wan2: physical/1000auto, up, rx-bytes/packets/dropped/errors=83024/192/0/0,
tx=120216/278/0/0
ha: physical/00, down, rx-bytes/packets/dropped/errors=0/0/0/0, tx=0/0/0/0
Secondary: FortiGate-201E, FG201E4Q17900771, HA cluster index = 1
Primary: FortiGate-201E, FG201ETK19900991, HA cluster index = 0
number of vcluster: 1
vcluster 1: work 169.254.0.1
Secondary: FG201E4Q17900771, HA operating index = 1
Primary: FG201ETK19900991, HA operating index = 0
If all members are in-sync, this means all members share the same configurations, except those that should not
be synced. If any members are out-of-sync, this means the member failed to sync with the primary device.
Debugging is similar when a cluster is out of sync.
Troubleshoot an HA formation
The following are requirements for setting up an HA cluster or FGSP peers.
Cluster members must have:
l The same model.
l The same hardware configuration.
l The same connections.
l The same generation.
The requirement to have the same generation is done as a best practice as it avoids issues
that can occur later on. If you are unsure if the FortiGates are from the same generation,
please contact customer service.
FortiOS 6.4.2 Administration Guide 764
Fortinet Inc.
System
Troubleshooting common HA formation errors
One member keeps shutting down during HA setup (hard drive failure):
If one member has a hard drive failure but the other does not, the one with the hard drive failure will be shut down during
HA setup. In this case, RMA the member to resolve the issue.
All members are primaries and members can't see other members:
Typically, this is a heartbeat issue. It is recommended that for a two-member cluster, you use a back-to-back connection
for heartbeat communication. If there are more than three members in the cluster, a separate switch should be used to
connect all heartbeat interfaces.
Check HA sync status
The HA sync status can be viewed in the GUI through either a widget on the Dashboard or on the System > HA page. It
can also be confirmed through the CLI. When a cluster is out of sync, administrators should correct the issue as soon as
possible as it affects the configuration integrity and can cause issues to occur.
HA sync status in the GUI
l Dashboard widget:
l Following HA setup, the HA Status widget can be added to the Dashboard. The widget shows the HA sync
status by displaying a green checkmark next to each member in sync. A red mark indicates the member is out
of sync.
l System > HA page:
l The same set of icons will be displayed on the System > HA page to indicate if the member is in sync.
HA sync status in the CLI
In the CLI, run the get system ha status command to see if the cluster is in sync. The sync status is reported under
Configuration Status. In the following example, both members are in sync:
# get system ha status
HA Health Status: OK
Model: FortiGate-VM64
Mode: HA A-P
Group: 0
Debug: 0
Cluster Uptime: 0 days 0:29:2
Cluster state change time: 2020-09-25 08:23:09
Primary selected using:
<2020/09/25 08:23:09> FGVME000000JUG0E is selected as the primary because it has the
largest value of override priority.
<2020/09/25 08:23:09> FGVMEV00000M6S87 is selected as the primary because it's the only
member in the cluster.
ses_pickup: disable
override: disable
Configuration Status:
FGVME000000JUG0E(updated 2 seconds ago): in-sync
FGVMEV00000M6S87(updated 4 seconds ago): in-sync
System Usage stats:
FortiOS 6.4.2 Administration Guide 765
Fortinet Inc.
System
FGVME000000JUG0E(updated 2 seconds ago):
sessions=11, average-cpu-user/nice/system/idle=1%/0%/1%/98%, memory=69%
FGVMEV00000M6S87(updated 4 seconds ago):
sessions=1, average-cpu-user/nice/system/idle=0%/0%/1%/99%, memory=69%
HBDEV stats:
FGVME000000JUG0E(updated 2 seconds ago):
port1: physical/1000auto, up, rx-bytes/packets/dropped/errors=60578029/155605/0/0,
tx=13360110/25218/0/0
FGVMEV00000M6S87(updated 4 seconds ago):
port1: physical/1000auto, up, rx-bytes/packets/dropped/errors=7006310/19328/0/0,
tx=6220835/13974/0/0
MONDEV stats:
FGVME000000JUG0E(updated 2 seconds ago):
port1: physical/1000auto, up, rx-bytes/packets/dropped/errors=60578029/155605/0/0,
tx=13360110/25218/0/0
port2: physical/1000auto, up, rx-bytes/packets/dropped/errors=70459776/175970/0/0,
tx=36854/226/0/0
FGVMEV00000M6S87(updated 4 seconds ago):
port1: physical/1000auto, up, rx-bytes/packets/dropped/errors=7006310/19328/0/0,
tx=6220835/13974/0/0
port2: physical/1000auto, up, rx-bytes/packets/dropped/errors=7197677/20580/0/0,
tx=29200/83/0/0
Primary : HA1 , FGVME000000JUG0E, HA cluster index = 0
Secondary : HA2 , FGVMEV00000M6S87, HA cluster index = 1
number of vcluster: 1
vcluster 1: work 169.254.0.1
Primary: FGVME000000JUG0E, HA operating index = 0
Secondary: FGVMEV00000M6S87, HA operating index = 1
Disabling stateful SCTP inspection
There is an option in FortiOS to disable stateful SCTP inspection. This option is useful when FortiGates are deployed in a
high availability (HA) cluster that uses the FortiGate Clustering Protocol (FGCP) and virtual clustering in a multihoming
topology. In this configuration, the primary stream control transmission protocol (SCTP) path traverses the primary
FortiGate node by using its active VDOM (for example, VDOM1), and the backup SCTP path traverses the other passive
FortiGate node by using its active VDOM (for example, VDOM2).
When stateful SCTP inspection is enabled, SCTP heartbeat traffic fails by means of the backup path because the
primary path goes through a different platform and VDOM. Since there is no state sharing between VDOMs, the passive
FortiGate is unaware of the original SCTP session and drops the heartbeats because of no associated sessions. When
stateful SCTP inspection is disabled, the passive node permits the SCTP heartbeats to pass.
When set to enable, SCTP session creation without SCTP INIT is enabled. When set to disable, SCTP session
creation without SCTP INIT is disabled (this is the default setting):
config system settings
set sctp-session-without-init {enable | disable}
end
The following is an example topology and scenario:
FortiOS 6.4.2 Administration Guide 766
Fortinet Inc.
System
In this example, FGT_A and FGT_B are in HA a-p mode with two virtual clusters. Two primaries exist on different
FortiGate units. PC1 eth1 can access PC5 eth1 through VDOM1, and PC1 eth2 can access PC5 eth2 through VDOM2.
On PC5, to listen for an SCTP connection:
sctp_darn -H 172.16.200.55 -B 172.17.200.55 -P 2500 -l
On PC1, to start an SCTP connection:
sctp_darn -H 10.1.100.11 -B 20.1.100.11 -P 2600 -c 172.16.200.55 -c 172.17.200.55 -p 2500
-s
An SCTP four-way handshake is on one VDOM, and a session is created on that VDOM. With the default configuration,
there is no session on any other VDOM, and the heartbeat on another path (another VDOM) is dropped. After enabling
sctp-session-without-init, the other VDOM creates the session when it receives the heartbeat, and the
heartbeat is forwarded:
config system settings
set sctp-session-without-init enable
end
Upgrading FortiGates in an HA cluster
You can upgrade the firmware on an HA cluster in the same way as on a standalone FortiGate. During a firmware
upgrade, the cluster upgrades the primary unit and all of the subordinate units to the new firmware image.
Before upgrading a cluster, back up your configuration (Configuration backups on page 53),
schedule a maintenance window, and make sure that you are using a supported upgrade path
(https://docs.fortinet.com/upgrade-tool).
Uninterrupted upgrade
An uninterrupted upgrade occurs without interrupting communication in the cluster.
To upgrade the cluster firmware without interrupting communication, the following steps are followed. These steps are
transparent to the user and the network, and might result in the cluster selecting a new primary unit.
1. The administrator uploads a new firmware image using the GUI or CLI. See Firmware on page 712 for details.
2. The firmware is upgraded on all of the subordinate units.
FortiOS 6.4.2 Administration Guide 767
Fortinet Inc.
System
3. A new primary unit is selected from the upgraded subordinates.
4. The firmware is upgraded on the former primary unit.
5. Primary unit selection occurs, according to the standard primary unit selection process.
If all of the subordinate units crash or otherwise stop responding during the upgrade process, the primary unit will
continue to operate normally, and will not be upgraded until at least one subordinate rejoins the cluster.
Interrupted upgrade
An interrupted upgrade upgrades all cluster members at the same time. This takes less time than an uninterrupted
upgrade, but it interrupts communication in the cluster. Interrupted upgrade is disabled by default.
To enable interrupted upgrade:
config system ha
set uninterruptible-upgrade disable
end
HA cluster setup examples
The following examples provide instructions on HA cluster setup:
l HA active-passive cluster setup on page 768
l HA active-active cluster setup on page 770
l HA virtual cluster setup on page 771
l HA using a hardware switch to replace a physical switch on page 774
HA active-passive cluster setup
An HA Active-Passive (A-P) cluster can be set up using the GUI or CLI.
This example uses the following network topology:
FortiOS 6.4.2 Administration Guide 768
Fortinet Inc.
System
To set up an HA A-P cluster using the GUI:
1. Make all the necessary connections as shown in the topology diagram.
2. Log into one of the FortiGates.
3. Go to System > HA and set the following options:
Mode Active-Passive
Device priority 128 or higher
Group name Example_cluster
Heartbeat interfaces ha1 and ha2
Except for the device priority, these settings must be the same on all FortiGates in the cluster.
4. Leave the remaining settings as their default values. They can be changed after the cluster is in operation.
5. Click OK.
The FortiGate negotiates to establish an HA cluster. Connectivity with the FortiGate may be temporarily lost as the
HA cluster negotiates and the FGCP changes the MAC addresses of the FortiGate's interfaces.
6. Factory reset the other FortiGate that will be in the cluster, configure GUI access, then repeat steps 1 to 5, omitting
setting the device priority, to join the cluster.
To set up an HA A-P cluster using the CLI:
1. Make all the necessary connections as shown in the topology diagram.
2. Log into one of the FortiGates.
3. Change the hostname of the FortiGate:
config system global
set hostname Example1_host
end
Changing the host name makes it easier to identify individual cluster units in the cluster operations.
4. Enable HA:
config system ha
set mode a-p
FortiOS 6.4.2 Administration Guide 769
Fortinet Inc.
System
set group-name Example_cluster
set hbdev ha1 10 ha2 20
end
5. Leave the remaining settings as their default values. They can be changed after the cluster is in operation.
6. Repeat steps 1 to 5 on the other FortiGate devices to join the cluster.
HA active-active cluster setup
An HA Active-Active (A-A) cluster can be set up using the GUI or CLI.
This example uses the following network topology:
To set up an HA A-A cluster using the GUI:
1. Make all the necessary connections as shown in the topology diagram.
2. Log into one of the FortiGates.
3. Go to System > HA and set the following options:
Mode Active-Active
Device priority 128 or higher
Group name Example_cluster
Heartbeat interfaces ha1 and ha2
Except for the device priority, these settings must be the same on all FortiGates in the cluster.
FortiOS 6.4.2 Administration Guide 770
Fortinet Inc.
System
4. Leave the remaining settings as their default values. They can be changed after the cluster is in operation.
5. Click OK.
The FortiGate negotiates to establish an HA cluster. Connectivity with the FortiGate may be temporarily lost as the
HA cluster negotiates and the FGCP changes the MAC addresses of the FortiGate's interfaces.
6. Factory reset the other FortiGate that will be in the cluster, configure GUI access, then repeat steps 1 to 5, omitting
setting the device priority, to join the cluster.
To set up an HA A-A cluster using the CLI:
1. Make all the necessary connections as shown in the topology diagram.
2. Log into one of the FortiGates.
3. Change the hostname of the FortiGate:
config system global
set hostname Example1_host
end
Changing the host name makes it easier to identify individual cluster units in the cluster operations.
4. Enable HA:
config system ha
set mode a-a
set group-name Example_cluster
set hbdev ha1 10 ha2 20
end
5. Leave the remaining settings as their default values. They can be changed after the cluster is in operation.
6. Repeat steps 1 to 5 on the other FortiGate devices to join the cluster.
HA virtual cluster setup
An HA virtual cluster can be set up using the GUI or CLI.
This example uses the following network topology:
FortiOS 6.4.2 Administration Guide 771
Fortinet Inc.
System
HA virtual clusters are based on VDOMs and are more complicated than regular clusters.
The root VDOM can only be associated with virtual cluster 1.
The VDOM that is assigned as the management VDOM can also only be associated with
virtual cluster 1.
To set up an HA virtual cluster using the GUI:
1. Make all the necessary connections as shown in the topology diagram.
2. Log into one of the FortiGates.
3. Go to System > HA and set the following options:
Mode Active-Passive
Device priority 128 or higher
Group name Example_cluster
Heartbeat interfaces ha1 and ha2
Except for the device priority, these settings must be the same on all FortiGates in the cluster.
4. Leave the remaining settings as their default values. They can be changed after the cluster is in operation.
FortiOS 6.4.2 Administration Guide 772
Fortinet Inc.
System
5. Click OK.
The FortiGate negotiates to establish an HA cluster. Connectivity with the FortiGate may be temporarily lost as the
HA cluster negotiates and the FGCP changes the MAC addresses of the FortiGate's interfaces.
6. Factory reset the other FortiGate that will be in the cluster, configure GUI access, then repeat steps 1 to 5, omitting
setting the device priority, to join the cluster.
7. Go to System > Settings and enable Virtual Domains.
8. Click Apply. You will be logged out of the FortiGate.
9. Log back into the FortiGate, ensure that you are in the global VDOM, and go to System > VDOM.
10. Create two new VDOMs, such as VD1 and VD2:
a. Click Create New. The New Virtual Domain page opens.
b. Enter a name for the VDOM in the Virtual Domain field, then click OK to create the VDOM.
c. Repeat these steps to create a second new VDOM.
11. Implement a virtual cluster by moving the new VDOMs to Virtual cluster 2:
a. Go to System > HA.
b. Enable VDOM Partitioning.
c. Click on the Virtual cluster 2 field and select the new VDOMs.
d. Click OK.
To set up an HA virtual cluster using the CLI:
1. Make all the necessary connections as shown in the topology diagram.
2. Set up a regular A-P cluster. See HA active-passive cluster setup on page 768.
3. Enable VDOMs:
config system global
set vdom-mode multi-vdom
end
You will be logged out of the FortiGate.
FortiOS 6.4.2 Administration Guide 773
Fortinet Inc.
System
4. Create two VDOMs:
config vdom
edit VD1
next
edit VD2
next
end
5. Reconfigure the HA settings to be a virtual cluster:
config global
config system ha
set vcluster2 enable
config secondary-vcluster
set vdom "VD1" "VD2"
end
end
end
HA using a hardware switch to replace a physical switch
Using a hardware switch to replace a physical switch is not recommended, as it offers no redundancy or interface
monitoring.
l If one FortiGate loses power, all of the clients connected to that FortiGate device cannot go to another device until
that FortiGate recovers.
l A hardware switch cannot be used as a monitor interface in HA. Any incoming or outgoing link failures on hardware
member interfaces will not trigger failover; this can affect traffic.
Examples
The examples use the following topology:
FortiOS 6.4.2 Administration Guide 774
Fortinet Inc.
System
Traffic between hardware switches
When using Hardware switch in HA environment, a client device connected to the hardware switch on the primary
FortiGate can communicate with client devices connected to the hardware switch on secondary FortiGates as long as
there is a direct connection between the two switches.
No configuration is required after setting up the hardware switches. If a client connected to both of the hardware switches
needs to reach destinations outside of the cluster, the firewall must be configured for it.
To configure the FortiGate devices:
1. Connect the devices as shown in the topology diagram.
2. On each FortiGate, configure HA:
config system ha
set mode a-a
set group-name Example_cluster
set hbdev ha1 10 ha2 20
end
3. On the primary FortiGate, configure the hardware switch:
config system virtual-switch
edit Hardware-SW
set physical-switch sw0
config port
edit port3
next
edit port5
next
end
next
end
4. On each FortiGate, configure the IP addresses on the hardware switches:
config system interface
edit Hardware-SW
set ip 6.6.6.1 255.255.255.0
set allowaccess ping ssh http https
next
end
After configuring the hardware switches, PC1 and PC2 can now communicate with each other.
Traffic passes through FortiGate
If client device needs to send traffic through the FortiGate, additional firewall configuration on the FortiGate is required.
All traffic from the hardware switches on either the primary or secondary FortiGate reaches the primary FortiGate first.
The traffic is then directed according to the HA mode and firewall configuration.
FortiOS 6.4.2 Administration Guide 775
Fortinet Inc.
System
To configure the FortiGate devices:
1. Connect the devices as shown in the topology diagram.
2. On each FortiGate, configure HA:
config system ha
set mode a-a
set group-name Example_cluster
set hbdev ha1 10 ha2 20
end
3. On the primary FortiGate, configure the hardware switch:
config system virtual-switch
edit Hardware-SW
set physical-switch sw0
config port
edit port3
next
edit port5
next
end
next
edit Hardware-SW2
set physical-switch sw0
config port
edit port1
next
end
next
end
4. On each FortiGate, configure the IP addresses on the hardware switch:
config system interface
edit Hardware-SW
set ip 6.6.6.1 255.255.255.0
set allowaccess ping ssh http https
next
edit Hardware-SW2
set ip 172.16.200.1 255.255.255.0
set allowaccess ping ssh http https
next
end
5. On each FortiGate, configure a firewall policy:
config firewall policy
edit 1
set srcintf Hardware-SW
set dstintf Hardware-SW2
set srcaddr all
set dstaddr all
set service ALL
set action accept
set schedule always
set nat enable
FortiOS 6.4.2 Administration Guide 776
Fortinet Inc.
System
next
end
6. On each FortiGate, configure a static route:
config router static
edit 1
set device Hardware-SW2
set gateway 172.16.200.254
next
end
Traffic from PC1 and PC2 can now reach destinations outside of the FortiGate cluster.
HA between remote sites over managed FortiSwitches
In a multi-site FortiGate HA topology that uses managed FortiSwitches in a multi-chassis link aggregation group
(MCLAG) to connect between sites, HA heartbeat signals can be sent through the switch layer of the FortiSwitches,
instead of through back-to-back links between the heartbeat interfaces. This means that two fiber connections can be
used, instead of four. The FortiSwitches can be different models, but must all support MCLAG and be running version
6.4.2 or later.
This example shows how to configure heartbeat VLANs to assign to the access ports that the heartbeat interfaces
connect to, passing over the trunk between the FortiSwitches on the two sites.
FortiOS 6.4.2 Administration Guide 777
Fortinet Inc.
System
FortiGate HA is with two FortiGates in separate locations and the switch layer connection between the FortiSwitches is
used for the heartbeat signal.
To configure the example:
1. Disconnect the physical connections between Site 1 and Site 2:
l Disconnect the cable on Site 1 FSW-1 port 12.
l Disconnect the cable on Site 1 FSW-2 port 10.
2. Configure Site 1:
a. On the FortiGate, go to WiFi & Switch Controller > FortiLink Interface and configure FortiLink:
b. Go to System > HA and configure HA:
i. Set the heartbeat ports to the ports that are connected to FortiSwitch.
ii. Adjust the priority and enable override so that this FortiGate becomes the primary.
c. Go to WiFi & Switch Controller > FortiSwitch VLANs and create a switch VLAN that is dedicated to the
FortiGate HA heartbeats between the two FortiGates.
FortiOS 6.4.2 Administration Guide 778
Fortinet Inc.
System
d. Assign the native VLAN of the switch ports that are connected to the heartbeat ports to the created VLAN:
i. Go to WiFi & Switch Controller > FortiSwitch Ports.
ii. In the Native VLAN column for the port, click the edit icon and select the Heartbeat VLAN.
e. On each FortiSwitch, enable MCLAG-ICL on the trunk port:
config switch trunk
edit D243Z17000032-0
set mclag-icl enable
next
end
3. Configure Site 2 the same as Site 1, except set the HA priority so that the FortiGate becomes the secondary.
4. Disconnect the physical connections for FortiGate HA and FortiLink interfaces on Site 2:
l Disconnect the cable on Site 2 FSW-1 ports 47 and 48.
l Disconnect the cable on Site 2 FSW-2 ports 47 and 48.
5. Connect cables between the FortiSwitch MCLAG in Site 1 and Site 2:
l Connect a cable from Site 1 FSW-1 port 12 to Site 2 FSW-1 port 22.
l Connect a cable from Site 1 FSW-2 port 10 to Site 2 FSW-2 port 20.
FortiOS 6.4.2 Administration Guide 779
Fortinet Inc.
System
6. On all of the FortiSwitches, configure the auto-isl-port-group. The group must match on both sides.
a. Site 1 FSW-1:
Set members to the port that is connected to Site 2 FSW-1:
config switch auto-isl-port-group
edit 1
set members port12
next
end
b. Site 1 FSW-2:
Set members to the port that is connected to Site 1 FSW-1:
config switch auto-isl-port-group
edit 1
set members port22
next
end
c. Site 2 FSW-1:
Set members to the port that is connected to Site 2 FSW-2:
config switch auto-isl-port-group
edit 1
set members port10
next
end
d. Site 2 FSW-2:
Set members to the port that is connected to Site 1 FSW-2:
config switch auto-isl-port-group
edit 1
set members port20
next
end
7. Connect the FortiGate HA and FortiLink interface connections on Site 2.
8. Configure a firewall policy and route for traffic so that the client can reach the internet.
9. Wait for HA to finish synchronizing and for all of the FortiSwitches to come online, then on FortiGate-1, go to WiFi &
Switch Controller > Managed FortiSwitch.
The page should look similar to the following:
FortiOS 6.4.2 Administration Guide 780
Fortinet Inc.
System
To test the configuration to confirm what happens when there is a failover:
1. On both PC-1 and PC-2, access the internet and monitor traffic. The traffic should be going through the primary
FortiGate.
2. Perform a continuous ping to an outside IP address, then reboot any one of the FortiSwitches.
Traffic from both Site 1 and Site 2 to the internet should be recovered in approximately five seconds.
3. Perform a continuous ping to an outside IP address, then force an HA failover (see Force HA failover for testing and
demonstrations on page 787).
Traffic from both Site 1 and Site 2 to the internet should be recovered in approximately five seconds.
4. After an HA failover, on the new primary FortiGate, go to WiFi & Switch Controller > Managed FortiSwitch.
The switch layer tiering will be changed so that the directly connected FortiSwitches are at the top of the topology.
Routing data over the HA management interface
In an HA environment, the ha-direct option allows data from services such as syslog, FortiAnalyzer, FortiManager,
SNMP, and NetFlow to be routed over the outgoing interface.
The following example shows how NetFlow data can be routed over the HA management interface mgmt1.
To route NetFlow data over the HA management interface:
1. On the primary unit (FortiGate A), configure the HA and mgmt1 interface settings:
(global) # config system ha
set group-name "test-ha"
set mode a-p
set password ENC
set hbdev "port6" 50
set hb-interval 4
set hb-lost-threshold 10
set session-pickup enable
set ha-mgmt-status enable
config ha-mgmt-interfaces
FortiOS 6.4.2 Administration Guide 781
Fortinet Inc.
System
edit 1
set interface "mgmt1"
next
end
set override enable
set priority 200
set ha-direct enable
end
(global) # config system interface
edit "mgmt1"
set ip 10.6.30.111 255.255.255.0
set allowaccess ping https ssh http telnet fgfm
set type physical
set dedicated-to management
set role lan
set snmp-index 1
next
end
2. On the secondary unit (FortiGate B), configure the HA and mgmt1 interface settings:
(global) # config system ha
set group-name "test-ha"
set mode a-p
set password ENC
set hbdev "port6" 50
set hb-interval 4
set hb-lost-threshold 10
set session-pickup enable
set ha-mgmt-status enable
config ha-mgmt-interfaces
edit 1
set interface "mgmt1"
next
end
set override enable
set priority 100
set ha-direct enable
end
(global) # config system interface
edit "mgmt1"
set ip 10.6.30.112 255.255.255.0
set allowaccess ping https ssh http telnet fgfm
set type physical
set dedicated-to management
set role lan
set snmp-index 1
next
end
3. On the primary unit (FortiGate A), configure the NetFlow setting:
(global) # config system netflow
set collector-ip 10.6.30.59
end
FortiOS 6.4.2 Administration Guide 782
Fortinet Inc.
System
4. Verify that NetFlow uses the mgmt1 IP:
(global) # diagnose test application sflowd 3
5. Verify that the NetFlow packets are being sent by the mgmt1 IP:
(vdom1) # diagnose sniffer packet any 'udp and port 2055' 4
interfaces=[any]
filters=[udp and port 2055]
8.397265 mgmt1 out 10.6.30.111.1992 -> 10.6.30.59.2055: udp 60
23.392175 mgmt1 out 10.6.30.111.1992 -> 10.6.30.59.2055: udp 188
23.392189 mgmt1 out 10.6.30.111.1992 -> 10.6.30.59.2055: udp 60
...
3 packets received by filter
0 packets dropped by kernel
6. On the secondary device (FortiGate B), change the priority so that it becomes the primary:
(global) # config system ha
set priority 250
end
7. Verify the NetFlow status on FortiGate A, which is using the new primary's mgmt1 IP:
(global) # diagnose test application sflowd 3
8. Verify that the NetFlow packets use the new source IP on FortiGate B:
(vdom1) # diagnose sniffer packet any 'udp and port 2055' 4
interfaces=[any]
filters=[udp and port 2055]
7.579574 mgmt1 out 10.6.30.112.3579 -> 10.6.30.59.2055: udp 60
22.581830 mgmt1 out 10.6.30.112.3579 -> 10.6.30.59.2055: udp 60
29.038336 mgmt1 out 10.6.30.112.3579 -> 10.6.30.59.2055: udp 1140
^C
3 packets received by filter
0 packets dropped by kernel
Override FortiAnalyzer and syslog server settings
In an HA cluster, secondary devices can be configured to use different FortiAnalyzer devices and syslog servers than the
primary device. VDOMs can also override global syslog server settings.
FortiOS 6.4.2 Administration Guide 783
Fortinet Inc.
System
Configure a different syslog server on a secondary HA device
To configure the primary HA device:
1. Configure a global syslog server:
config global
config log syslog setting
set status enable
set server 172.16.200.44
set facility local6
set format default
end
end
2. Set up a VDOM exception to enable setting the global syslog server on the secondary HA device:
config global
config system vdom-exception
edit 1
set object log.syslogd.setting
next
end
end
To configure the secondary HA device:
1. Configure a global syslog server:
config global
config log syslogd setting
set status enable
set server 172.16.200.55
set facility local5
end
end
FortiOS 6.4.2 Administration Guide 784
Fortinet Inc.
System
2. After the primary and secondary device synchronize, generate logs on the secondary device.
To confirm that logs are been sent to the syslog server configured on the secondary device:
1. On the primary device, retrieve the following packet capture from the secondary device's syslog server:
# diagnose sniffer packet any "host 172.16.200.55" 6
interfaces=[any]
filters=[host 172.16.200.55]
266.859494 port2 out 172.16.200.2.7434 -> 172.16.200.55.514: udp 278
0x0000 0000 0000 0000 0009 0f09 0004 0800 4500 ..............E.
0x0010 0132 f3c7 0000 4011 9d98 ac10 c802 ac10 .2....@.........
0x0020 c837 1d0a 0202 011e 4b05 3c31 3734 3e64 .7......K.<174>d
0x0030 6174 653d 3230 3230 2d30 332d 3134 2074 ate=2020-03-14.t
0x0040 696d 653d 3132 3a30 303a 3035 2064 6576 ime=12:00:05.dev
0x0050 6e61 6d65 3d22 466f 7274 6947 6174 652d name="FGT-81E-Sl
0x0060 3831 455f 4122 2064 6576 6964 3d22 4647 ave-A".devid="FG
0x0070 5438 3145 3451 3136 3030 3030 3438 2220 T81E4Q16000048".
0x0080 6c6f 6769 643d 2230 3130 3030 3230 3032 logid="010002002
0x0090 3722 2074 7970 653d 2265 7665 6e74 2220 7".type="event".
0x00a0 7375 6274 7970 653d 2273 7973 7465 6d22 subtype="system"
0x00b0 206c 6576 656c 3d22 696e 666f 726d 6174 .level="informat
0x00c0 696f 6e22 2076 643d 2276 646f 6d31 2220 ion".vd="vdom1".
0x00d0 6576 656e 7474 696d 653d 3135 3834 3231 eventtime=158421
0x00e0 3234 3035 3835 3938 3335 3639 3120 747a 2405859835691.tz
0x00f0 3d22 2d30 3730 3022 206c 6f67 6465 7363 ="-0700".logdesc
0x0100 3d22 4f75 7464 6174 6564 2072 6570 6f72 ="Outdated.repor
0x0110 7420 6669 6c65 7320 6465 6c65 7465 6422 t.files.deleted"
0x0120 206d 7367 3d22 4465 6c65 7465 2031 206f .msg="Delete.1.o
0x0130 6c64 2072 6570 6f72 7420 6669 6c65 7322 ld.report.files"
Configure a different syslog server in the root VDOM on a secondary HA device
FortiOS 6.4.2 Administration Guide 785
Fortinet Inc.
System
To configure the primary HA device:
1. Configure a global syslog server:
config global
config log syslog setting
set status enable
set server 172.16.200.44
set facility local6
set format default
end
end
2. Set up a VDOM exception to enable syslog-override in the secondary HA device root VDOM:
config global
config system vdom-exception
edit 1
set object log.syslogd.override-setting
set scope inclusive
set vdom root
next
end
end
3. In the VDOM, enable syslog-override in the log settings, and set up the override syslog server:
config root
config log setting
set syslog-override enable
end
config log syslog override-setting
set status enable
set server 172.16.200.44
set facility local6
set format default
end
end
After syslog-override is enabled, an override syslog server must be configured, as logs will not be sent to the global
syslog server.
To configure the secondary HA device:
1. Configure an override syslog server in the root VDOM:
config root
config log syslogd override-setting
set status enable
set server 172.16.200.55
set facility local5
set format default
end
end
2. After the primary and secondary device synchronize, generate logs in the root VDOM on the secondary device.
FortiOS 6.4.2 Administration Guide 786
Fortinet Inc.
System
To confirm that logs are been sent to the syslog server configured for the root VDOM on the secondary
device:
1. On the primary device, retrieve the following packet capture from the syslog server configured in the root VDOM on
the secondary device:
# diagnose sniffer packet any "host 172.16.200.55" 6
interfaces=[any]
filters=[host 172.16.200.55]
156.759696 port2 out 172.16.200.2.1165 -> 172.16.200.55.514: udp 277
0x0000 0000 0000 0000 0009 0f09 0004 0800 4500 ..............E.
0x0010 0131 f398 0000 4011 9dc8 ac10 c802 ac10 .1....@.........
0x0020 c837 048d 0202 011d af5f 3c31 3734 3e64 .7......._<174>d
0x0030 6174 653d 3230 3230 2d30 332d 3134 2074 ate=2020-03-14.t
0x0040 696d 653d 3131 3a33 353a 3035 2064 6576 ime=11:35:05.dev
0x0050 6e61 6d65 3d22 466f 7274 6947 6174 652d name="FGT-81E-Sl
0x0060 3831 455f 4122 2064 6576 6964 3d22 4647 ave-A".devid="FG
0x0070 5438 3145 3451 3136 3030 3030 3438 2220 T81E4Q16000048".
0x0080 6c6f 6769 643d 2230 3130 3030 3230 3032 logid="010002002
0x0090 3722 2074 7970 653d 2265 7665 6e74 2220 7".type="event".
0x00a0 7375 6274 7970 653d 2273 7973 7465 6d22 subtype="system"
0x00b0 206c 6576 656c 3d22 696e 666f 726d 6174 .level="informat
0x00c0 696f 6e22 2076 643d 2272 6f6f 7422 2065 ion".vd="root".e
0x00d0 7665 6e74 7469 6d65 3d31 3538 3432 3130 venttime=1584210
0x00e0 3930 3537 3539 3334 3132 3632 2074 7a3d 905759341262.tz=
0x00f0 222d 3037 3030 2220 6c6f 6764 6573 633d "-0700".logdesc=
0x0100 224f 7574 6461 7465 6420 7265 706f 7274 "Outdated.report
0x0110 2066 696c 6573 2064 656c 6574 6564 2220 .files.deleted".
0x0120 6d73 673d 2244 656c 6574 6520 3220 6f6c msg="Delete.2.ol
0x0130 6420 7265 706f 7274 2066 696c 6573 22 d.report.files"
Force HA failover for testing and demonstrations
This command should only be used for testing, troubleshooting, maintenance, and
demonstrations.
Do not use it in a live production environment outside of an active maintenance window.
HA failover can be forced on an HA primary device. The device will stay in a failover state regardless of the conditions.
The only way to remove the failover status is by manually turning it off.
Syntax
execute ha failover set <cluster_id>
execute ha failover unset <cluster_id>
Variable Description
<cluster_id> The cluster ID is 1 for any cluster that is not in virtual cluster mode, and can be 1
or 2 if virtual cluster mode is enabled.
FortiOS 6.4.2 Administration Guide 787
Fortinet Inc.
System
Example
To manually force an HA failover:
# execute ha failover set 1
Caution: This command will trigger an HA failover.
It is intended for testing purposes.
Do you want to continue? (y/n)y
To view the failover status:
# execute ha failover status
failover status: set
To view the system status of a device in forced HA failover:
# get system ha status
HA Health Status: OK
Model: FortiGate-300D
Mode: HA A-P
Group: 240
Debug: 0
Cluster Uptime: 0 days 2:11:46
Cluster state change time: 2020-03-12 17:38:04
Primary selected using:
<2020/03/12 17:38:04> FGT3HD3914800153 is selected as the primary because it has EXE_
FAIL_OVER flag set.
<2020/03/12 15:27:26> FGT3HD3914800069 is selected as the primary because it has the
largest value of override priority.
ses_pickup: disable
override: enable
Configuration Status:
FGT3HD3914800069(updated 4 seconds ago): in-sync
FGT3HD3914800153(updated 3 seconds ago): in-sync
System Usage stats:
FGT3HD3914800069(updated 4 seconds ago):
sessions=5, average-cpu-user/nice/system/idle=0%/0%/0%/100%, memory=30%
FGT3HD3914800153(updated 3 seconds ago):
sessions=41, average-cpu-user/nice/system/idle=0%/0%/0%/99%, memory=30%
HBDEV stats:
FGT3HD3914800069(updated 4 seconds ago):
port3: physical/1000auto, up, rx-bytes/packets/dropped/errors=15914162/42929/0/0,
tx=15681840/39505/0/0
port5: physical/1000auto, up, rx-bytes/packets/dropped/errors=17670346/52854/0/0,
tx=20198409/54692/0/0
FGT3HD3914800153(updated 3 seconds ago):
port3: physical/1000auto, up, rx-bytes/packets/dropped/errors=16636700/45544/0/0,
tx=15529791/39512/0/0
port5: physical/1000auto, up, rx-bytes/packets/dropped/errors=20199928/54699/0/0,
tx=17672146/52862/0/0
Secondary: FortiGate-300D , FGT3HD3914800069, HA cluster index = 1
Primary: FortiGate-300D , FGT3HD3914800153, HA cluster index = 0
number of vcluster: 1
vcluster 1: standby 169.254.0.1
FortiOS 6.4.2 Administration Guide 788
Fortinet Inc.
System
Secondary: FGT3HD3914800069, HA operating index = 1
Primary: FGT3HD3914800153, HA operating index = 0
To stop the failover status:
# execute ha failover unset 1
Caution: This command may trigger an HA failover.
It is intended for testing purposes.
Do you want to continue? (y/n)y
To view the system status of a device after forced HA failover is disabled:
# get system ha status
HA Health Status: OK
Model: FortiGate-300D
Mode: HA A-P
Group: 240
Debug: 0
Cluster Uptime: 0 days 2:14:55
Cluster state change time: 2020-03-12 17:42:17
Primary selected using:
<2020/03/12 17:42:17> FGT3HD3914800069 is selected as the primary because it has the
largest value of override priority.
<2020/03/12 17:38:04> FGT3HD3914800153 is selected as the primary because it has EXE_
FAIL_OVER flag set.
<2020/03/12 15:27:26> FGT3HD3914800069 is selected as the primary because it has the
largest value of override priority.
ses_pickup: disable
override: enable
Configuration Status:
FGT3HD3914800069(updated 3 seconds ago): in-sync
FGT3HD3914800153(updated 2 seconds ago): in-sync
System Usage stats:
FGT3HD3914800069(updated 3 seconds ago):
sessions=0, average-cpu-user/nice/system/idle=0%/0%/0%/100%, memory=30%
FGT3HD3914800153(updated 2 seconds ago):
sessions=38, average-cpu-user/nice/system/idle=0%/0%/0%/100%, memory=30%
HBDEV stats:
FGT3HD3914800069(updated 3 seconds ago):
port3: physical/1000auto, up, rx-bytes/packets/dropped/errors=16302442/43964/0/0,
tx=16053848/40454/0/0
port5: physical/1000auto, up, rx-bytes/packets/dropped/errors=18161941/54088/0/0,
tx=20615650/55877/0/0
FGT3HD3914800153(updated 2 seconds ago):
port3: physical/1000auto, up, rx-bytes/packets/dropped/errors=17033009/46641/0/0,
tx=15907891/40462/0/0
port5: physical/1000auto, up, rx-bytes/packets/dropped/errors=20617180/55881/0/0,
tx=18163135/54091/0/0
Primary: FortiGate-300D , FGT3HD3914800069, HA cluster index = 1
Secondary: FortiGate-300D , FGT3HD3914800153, HA cluster index = 0
number of vcluster: 1
vcluster 1: work 169.254.0.2
Primary: FGT3HD3914800069, HA operating index = 0
Secondary: FGT3HD3914800153, HA operating index = 1
FortiOS 6.4.2 Administration Guide 789
Fortinet Inc.
System
Querying autoscale clusters for FortiGate VM
When a FortiGate VM secondary device is added to a cluster, the new secondary member can query the cluster about its
autoscale environment. FortiManager can then run this query on the new secondary member to update its autoscale
record.
To view cluster information from a secondary member:
# diagnose sys ha checksum autoscale-cluster
Cluster information sample
Sample cloud topology:
FGT_BYOL; primary; 10.0.0.6; FGVM04TM00000066
FGT_BYOL; secondary; 10.0.0.7; FGVM00000000056
FGT_PAYG; secondary; 10.0.0.4; FGTAZ000000000CD
FGT_PAYG; secondary; 10.0.0.5; FGTAZ0000000003D
From the secondary device, you can see cluster checksums and the primary device:
# diagnose sys ha checksum autoscale-cluster
================== FGTAZ000000000CD ==================
is_autoscale_master()=0
debugzone
global: 56 49 b3 02 f2 b7 5b 82 ec 2d c2 1a ff 80 8c 79
root: bf 18 cf 83 1e 04 c3 04 4c e4 66 bc 38 fe 3a dc
all: 77 06 d0 89 6e 06 c0 86 17 98 53 72 33 85 ae ff
checksum
global: 56 49 b3 02 f2 b7 5b 82 ec 2d c2 1a ff 80 8c 79
root: bf 18 cf 83 1e 04 c3 04 4c e4 66 bc 38 fe 3a dc
all: 77 06 d0 89 6e 06 c0 86 17 98 53 72 33 85 ae ff
================== FGVM04TM00000066 ==================
is_autoscale_master()=1
debugzone
global: 56 49 b3 02 f2 b7 5b 82 ec 2d c2 1a ff 80 8c 79
root: bf 18 cf 83 1e 04 c3 04 4c e4 66 bc 38 fe 3a dc
all: 77 06 d0 89 6e 06 c0 86 17 98 53 72 33 85 ae ff
checksum
global: 56 49 b3 02 f2 b7 5b 82 ec 2d c2 1a ff 80 8c 79
root: bf 18 cf 83 1e 04 c3 04 4c e4 66 bc 38 fe 3a dc
all: 77 06 d0 89 6e 06 c0 86 17 98 53 72 33 85 ae ff
================== FGVM00000000056 ==================
is_autoscale_master()=0
debugzone
global: 56 49 b3 02 f2 b7 5b 82 ec 2d c2 1a ff 80 8c 79
root: bf 18 cf 83 1e 04 c3 04 4c e4 66 bc 38 fe 3a dc
all: 77 06 d0 89 6e 06 c0 86 17 98 53 72 33 85 ae ff
checksum
global: 56 49 b3 02 f2 b7 5b 82 ec 2d c2 1a ff 80 8c 79
root: bf 18 cf 83 1e 04 c3 04 4c e4 66 bc 38 fe 3a dc
all: 77 06 d0 89 6e 06 c0 86 17 98 53 72 33 85 ae ff
================== FGTAZ0000000003D ==================
is_autoscale_master()=0
debugzone
global: 56 49 b3 02 f2 b7 5b 82 ec 2d c2 1a ff 80 8c 79
FortiOS 6.4.2 Administration Guide 790
Fortinet Inc.
System
root: bf 18 cf 83 1e 04 c3 04 4c e4 66 bc 38 fe 3a dc
all: 77 06 d0 89 6e 06 c0 86 17 98 53 72 33 85 ae ff
checksum
global: 56 49 b3 02 f2 b7 5b 82 ec 2d c2 1a ff 80 8c 79
root: bf 18 cf 83 1e 04 c3 04 4c e4 66 bc 38 fe 3a dc
all: 77 06 d0 89 6e 06 c0 86 17 98 53 72 33 85 ae ff
To get ha sync information from the secondary device:
# get test hasync 50
autoscale_count=69. current_jiffies=41235125
10.0.0.6, timeo=31430, serial_no=FGVM04TM19001766
10.0.0.7, timeo=31430, serial_no=FGVM04TM19008156
10.0.0.5, timeo=31430, serial_no=FGTAZR7UZRKKNR3D
SNMP
SNMP enables you to monitor hardware on your network. You can configure the hardware, such as the FortiGate SNMP
agent, to report system information and send traps (alarms or event messages) to SNMP managers. SNMP traps alert
you to events that happen, such as when a log disk is full or a virus is detected.
The FortiGate SNMP implementation is read-only. SNMP v1/v2c, and v3 compliant SNMP managers have read-only
access to FortiGate system information through queries, and can receive trap messages from the FortiGate unit.
l Interface access on page 791
l MIB files on page 792
l SNMP agent on page 792
l SNMP v1/v2c communities on page 793
l SNMP v3 users on page 795
l Important SNMP traps on page 796
l SNMP traps and query for monitoring DHCP pool on page 798
Interface access
Before a remote SNMP manager can connect to the FortiGate SNMP agent, you must configure one or more FortiGate
interfaces to accept SNMP connections.
To configure a FortiGate interface to accept SNMP connections in the GUI:
1. Go to Network > Interfaces.
2. Edit the interface.
3. In the Administrative Access options, enable SNMP.
4. Click OK.
To configure a FortiGate interface to accept SNMP connections in the CLI:
config system interface
edit <interface>
FortiOS 6.4.2 Administration Guide 791
Fortinet Inc.
System
append allowaccess snmp
set snmp-index <integer>
config ipv6
append ip6-allowaccess snmp
end
next
end
MIB files
The FortiGate SNMP agent supports Fortinet proprietary MIBs, as well as the parts of RFC 2665 and RFC 1213 that
apply to FortiGate unit configuration.
Your SNMP manager may already include standard and private MIBs in a compiled database that is ready to use. You
must add the Fortinet proprietary MIBs to this database to have access to Fortinet specific information.
MIB file or RFC Description
FORTINET-CORE-MIB.mib The Fortinet core MIB includes all system configuration and trap information that
is common to all Fortinet products.
Your SNMP manager requires this information to monitor Fortinet device settings
and receive traps from the FortiGate SNMP agent.
FORTINET-FORTIGATE- The FortiGate MIB includes all system configuration information and trap
MIB.mib information that is specific to FortiGate units.
Your SNMP manager requires this information to monitor FortiGate settings and
receive traps from the FortiGate SNMP agent.
RFC-1213 (MIB II) The FortiGate SNMP agent supports MIB II groups with the following exceptions:
l No support for the EGP group from MIB II (RFC 1213, section 3.11 and 6.10).
l Protocol statistics returned for MIB II groups (IP/ICMP/TCP/UDP/etc.) do not
accurately capture all Fortinet traffic activity. More accurate information can
be obtained from the information reported by the Fortinet MIB.
RFC-2665 (Ethernet-like MIB) The FortiGate SNMP agent supports Ethernet-like MIB information.
FortiGate SNMP does not support for the dot3Tests and dot3Errors groups.
To download the MIB files:
1. Go to System > SNMP.
2. Click Download FortiGate MIB File and save the file to the management computer.
3. Click Download Fortinet Core MIB File and save the file to the management computer.
SNMP agent
The SNMP agent sends SNMP traps originating on the FortiGate to an external monitoring SNMP manager defined in a
SNMP community. The SNMP manager can monitor the FortiGate system to determine if it is operating properly, or if
any critical events occurring.
FortiOS 6.4.2 Administration Guide 792
Fortinet Inc.
System
The description, location, and contact information for this FortiGate system will be part of the information that the SNMP
manager receives. This information is useful if the SNMP manager is monitoring many devices, and enables faster
responses when the FortiGate system requires attention.
To configure the SNMP agent in the GUI:
1. Go to System > SNMP.
2. Enable SNMP Agent.
3. Enter a description of the agent.
4. Enter the location of the FortiGate unit.
5. Enter a contact or administrator for the SNMP Agent or FortiGate unit.
6. Click Apply.
To configure the SNMP agent in the CLI:
config system snmp sysinfo
set status enable
set description <string>
set contact-info <string>
set location <string>
end
SNMP v1/v2c communities
An SNMP community is a grouping of equipment for network administration purposes. A single device can belong to
multiple communities.
You must add an SNMP community to the FortiGate so that the SNMP manager can receive traps and system
information. Up to three communities can be added.
FortiOS 6.4.2 Administration Guide 793
Fortinet Inc.
System
To create a n SNMP v1/v2c community in the GUI:
1. Go to System > SNMP.
2. In the SNMP v1/v2c table, click Create New.
3. Enter a Community Name and enable the community.
4. In the Hosts section, enter the IP Address and select the Host Type for each SNMP manager.
5. In the Queries section, enable or disable v1 and v2c queries, then enter the port numbers that the SNMP managers
in this community use for them.
6. In the Traps section, enable or disable v1 and v2c traps, then enter the local and remote port numbers that the
SNMP managers in this community use for them.
7. In the SNMP Events section, enable or disable the events that activate traps in this community.
8. Click OK.
To create a n SNMP v1/v2c community in the CLI:
config system snmp community
edit 2
set name <string>
set status {enable | disable}
config hosts
edit <host_id>
set ip <ip/mask>
set source-ip <class_ip>
set ha-direct {enable | disable}
set host-type {any | query | trap}
next
end
set query-v1-port <port_number>
set query-v1-status {enable | disable}
set query-v2c-port <port_number>
set query-v2c-status {enable | disable}
set trap-v1-lport <port_number>
set trap-v1-rport <port_number>
FortiOS 6.4.2 Administration Guide 794
Fortinet Inc.
System
set trap-v1-status {enable | disable}
set trap-v2c-lport <port_number>
set trap-v2c-rport <port_number>
set trap-v2c-status {enable | disable}
set events <events>
next
end
SNMP v3 users
Authentication is used to ensure the identity of users. Privacy allows for encryption of SNMP v3 messages to ensure
confidentiality of data. These protocols provide a higher level of security than is available in SNMP v1 and v2c, which use
community strings for security. Both authentication and privacy are optional.
To create a n SNMP v3 user in the GUI:
1. Go to System > SNMP.
2. In the SNMP v3 table, click Create New.
3. Enter a User Name and enable the user.
4. In the Security Level section, configure the security level:
l No Authentication: No authentication or encryption.
l Authentication: Select the authentication algorithm and password.
l Authentication and Private: Select both the authentication and encryption algorithms and password.
5. In the Hosts section, enter the IP Address for each SNMP manager.
6. In the Queries section, enable or disable queries, then enter the port number that the SNMP managers use for
them.
7. In the Traps section, enable or disable traps, then enter the local and remote port numbers that the SNMP
managers use for them.
8. In the SNMP Events section, enable or disable the events that activate traps.
9. Click OK.
FortiOS 6.4.2 Administration Guide 795
Fortinet Inc.
System
To create an SNMP v3 user in the CLI:
config system snmp user
edit <user>
set status {enable | disable}
set trap-status {enable | disable}
set trap-lport <port_number>
set trap-rport <port_number>
set queries {enable | disable}
set query-port <port_number>
set notify-hosts <class_ip> ... <class_ip>
set source-ip <class_ip>
set ha-direct {enable | disable}
set events <events>
set security-level {no-auth-no-priv | auth-no-priv | auth-priv}
set auth-proto {md5 | sha | sha224 | sha256 | sha384 | sha512}
set auth-pwd <password>
set priv-proto {aes | des | aes256 | aes256cisco}
set priv-pwd <password>
next
end
Important SNMP traps
Link Down and Link Up traps
This trap is sent when a FortiGate port either goes down or is brought up.
For example, the following traps are generated when the state of port34 is set to down using set status down, and
then brought up using set status up:
NET-SNMP version 5.7.3 2019-01-31 14:11:48 10.1.100.1(via UDP: [10.1.100.1]:162->
[10.1.100.11]:162) TRAP, SNMP v1, community REGR-SYS SNMPv2-MIB::snmpTraps Link Down Trap
(0) Uptime: 0:14:44.95 IF-MIB::ifIndex.42 = INTEGER: 42 IF-MIB::ifAdminStatus.42 = INTEGER:
down(2) IF-MIB::ifOperStatus.42 = INTEGER: down(2) FORTINET-CORE-MIB::fnSysSerial.0 =
STRING: FG140P3G15800330 SNMPv2-MIB::sysName.0 = STRING: FortiGate-140D-POE
2019-01-31 14:11:48 <UNKNOWN> [UDP: [10.1.100.1]:162->[10.1.100.11]:162]: DISMAN-EVENT-
MIB::sysUpTimeInstance = Timeticks: (88495) 0:14:44.95 SNMPv2-MIB::snmpTrapOID.0 = OID: IF-
MIB::linkDown IF-MIB::ifIndex.42 = INTEGER: 42 IF-MIB::ifAdminStatus.42 = INTEGER: down(2)
IF-MIB::ifOperStatus.42 = INTEGER: down(2) FORTINET-CORE-MIB::fnSysSerial.0 = STRING:
FG140P3G15800330 SNMPv2-MIB::sysName.0 = STRING: FortiGate-140D-POE 2019-01-31 14:12:01
10.1.100.1(via UDP: [10.1.100.1]:162->[10.1.100.11]:162) TRAP, SNMP v1, community REGR-SYS
SNMPv2-MIB::snmpTraps Link Up Trap (0) Uptime: 0:14:57.98 IF-MIB::ifIndex.42 = INTEGER: 42
IF-MIB::ifAdminStatus.42 = INTEGER: up(1) IF-MIB::ifOperStatus.42 = INTEGER: up(1) FORTINET-
CORE-MIB::fnSysSerial.0 = STRING: FG140P3G15800330 SNMPv2-MIB::sysName.0 = STRING:
FortiGate-140D-POE
2019-01-31 14:12:01 <UNKNOWN> [UDP: [10.1.100.1]:162->[10.1.100.11]:162]: DISMAN-EVENT-
MIB::sysUpTimeInstance = Timeticks: (89798) 0:14:57.98 SNMPv2-MIB::snmpTrapOID.0 = OID: IF-
MIB::linkUp IF-MIB::ifIndex.42 = INTEGER: 42 IF-MIB::ifAdminStatus.42 = INTEGER: up(1) IF-
MIB::ifOperStatus.42 = INTEGER: up(1) FORTINET-CORE-MIB::fnSysSerial.0 = STRING:
FG140P3G15800330 SNMPv2-MIB::sysName.0 = STRING: FortiGate-140D-POE
FortiOS 6.4.2 Administration Guide 796
Fortinet Inc.
System
fgFmTrapIfChange trap
This trap is sent when any changes are detected on the interface. The change can be very simple, such as giving an
IPV4 address.
For example, the user has given the IP address of 1.2.3.4/24 to port 1 and the EMS Manager has detected the following
trap:
DISMAN-EXPRESSION-MIB::sysUpTimeInstance = Timeticks: (7975058) 22:09:10.58 SNMPv2-
MIB::snmpTrapOID.0 = OID: FORTINET-FORTIGATE-MIB::fgFmTrapIfChange FORTINET-CORE-
MIB::fnSysSerial.0 = STRING: FG140P3G15800330 IF-MIB::ifName.45 = STRING: port1 FORTINET-
FORTIGATE-MIB::fgManIfIp.0 = IpAddress: 1.2.3.4 FORTINET-FORTIGATE-MIB::fgManIfMask.0 =
IpAddress: 255.255.255.0 FORTINET-FORTIGATE-MIB::fgManIfIp6.0 = STRING: 0:0:0:0:0:0:0:0
entConfigChange trap
The change to the interface in the previous example has also triggered the ConfChange Trap which is sent along with
the fgFmTrapIfChange trap:
2018-11-15 09:30:23 FGT_A [UDP: [172.16.200.1]:162->[172.16.200.55]:162]: DISMAN-EXPRESSION-
MIB::sysUpTimeInstance = Timeticks: (8035097) 22:19:10.97 SNMPv2-MIB::snmpTrapOID.0 = OID:
ENTITY-MIB::entConfigChange
fgTrapDeviceNew trap
This trap is triggered when a new device, like a FortiSwitch, is connected to the FortiGate.
For example, the following scenario has given the device a new trap for adding FortiAP on a PoE interface a FortiGate
140D-POE. The trap has important information about the device name, device MAC address, and when it was last seen.
2018-11-15 11:17:43 UDP/IPv6: [2000:172:16:200::1]:162 [UDP/IPv6: [2000:172:16:200::1]:162]:
DISMAN-EXPRESSION-MIB::sysUpTimeInstance = Timeticks: (520817) 1:26:48.17 SNMPv2-
MIB::snmpTrapOID.0 = OID: FORTINET-FORTIGATE-MIB::fgTrapDeviceNew FORTINET-CORE-
MIB::fnSysSerial.0 = STRING: FG140P3G15800330 SNMPv2-MIB::sysName.0 = STRING: FGT_A IF-
MIB::ifIndex.0 = INTEGER: 0 FORTINET-FORTIGATE-MIB::fgVdEntIndex.0 = INTEGER: 0 FORTINET-
FORTIGATE-MIB::fgDeviceCreated.0 = Gauge32: 5 FORTINET-FORTIGATE-MIB::fgDeviceLastSeen.0 =
Gauge32: 5 FORTINET-FORTIGATE-MIB::fgDeviceMacAddress.0 = STRING: 90:6c:ac:f9:97:a0
2018-11-15 11:17:43 FGT_A [UDP: [172.16.200.1]:162->[172.16.200.55]:162]: DISMAN-EXPRESSION-
MIB::sysUpTimeInstance = Timeticks: (520817) 1:26:48.17 SNMPv2-MIB::snmpTrapOID.0 = OID:
FORTINET-FORTIGATE-MIB::fgTrapDeviceNew FORTINET-CORE-MIB::fnSysSerial.0 = STRING:
FG140P3G15800330 SNMPv2-MIB::sysName.0 = STRING: FGT_A IF-MIB::ifIndex.0 = INTEGER: 0
FORTINET-FORTIGATE-MIB::fgVdEntIndex.0 = INTEGER: 0 FORTINET-FORTIGATE-
MIB::fgDeviceCreated.0 = Gauge32: 5 FORTINET-FORTIGATE-MIB::fgDeviceLastSeen.0 = Gauge32: 5
FORTINET-FORTIGATE-MIB::fgDeviceMacAddress.0 = STRING: 90:6c:ac:f9:97:a0
fgTrapAvOversize trap
The fgTrapAvOversize trap is generated when the antivirus scanner detects an oversized file:
019-01-31 13:22:04 10.1.100.1(via UDP: [10.1.100.1]:162->[10.1.100.11]:162) TRAP, SNMP v1,
community REGR-SYS FORTINET-FORTIGATE-MIB::fgt140P Enterprise Specific Trap (602) Uptime: 1
day, 3:41:10.31 FORTINET-CORE-MIB::fnSysSerial.0 = STRING: FG140P3G15800330 SNMPv2-
MIB::sysName.0 = STRING: FortiGate-140D-POE 2019-01-31 13:22:29 <UNKNOWN> [UDP:
FortiOS 6.4.2 Administration Guide 797
Fortinet Inc.
System
[10.1.100.1]:162->[10.1.100.11]:162]: DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks:
(9967031) 1 day, 3:41:10.31 SNMPv2-MIB::snmpTrapOID.0 = OID: FORTINET-FORTIGATE-
MIB::fgTrapAvOversize FORTINET-CORE-MIB::fnSysSerial.0 = STRING: FG140P3G15800330 SNMPv2-
MIB::sysName.0 = STRING: FortiGate-140D-POE
SNMP traps and query for monitoring DHCP pool
The SNMP DHCP event contains three traps and one query.
Traps are sent when:
l DHCP server IP pool usage reaches 90%
l DHCP server detect an IP address that is already in use
l DHCP client receives DHCP NAK
SNMP queries are accepted for DHCP lease usage information (OID = 1.3.6.1.4.1.12356.101.23). The query result is
based on the leased out percentage.
To enable the SNMP DHCP event in the GUI:
1. Go to System > SNMP.
2. Click Create New in either the SNMP v1/v2c table or SNMP v3 table, or edit an existing community or user.
3. Configure the settings as required.
4. In the SNMP Events list, enable snmp-event::dhcp.
5. Click OK.
To enable the SNMP DHCP event in the CLI:
config system snmp community
edit 1
set name "REGR-SYS"
config hosts
edit 1
set ip 10.1.100.11 255.255.255.255
next
edit 2
set ip 172.16.200.55 255.255.255.255
next
end
FortiOS 6.4.2 Administration Guide 798
Fortinet Inc.
System
set events dhcp
next
end
config system snmp user
edit "1"
set notify-hosts 172.10.1.0 172.20.1.0
set events dhcp
set security-level auth-priv
set auth-proto sha384
set auth-pwd ********************
set priv-proto aes256
set priv-pwd *********************
next
end
Replacement messages
FortiOS has replacement messages that are HTML and text files. These messages can be customized to meet user
requirements. The content can be modified, and images can be added.
Modifying replacement messages
The Replacement Messages page has two views. Simple View (the default view) shows the most commonly used
replacement messages. Extended View shows the entire list and all replacement message categories.
To modify a replacement message in the GUI:
1. Go to System > Replacement Messages.
2. Select a replacement message and click Edit.
If the message you want to edit is not visible, click Extended View in the upper right-hand corner of the top menu.
FortiOS 6.4.2 Administration Guide 799
Fortinet Inc.
System
3. Edit the HTML code.
The message is visible on the left alongside the HTML code on the right. The message view updates in real-time as
you edit the content.
4. Click Save.
Click Restore Defaults to return to the original message and code base.
To modify a replacement message in the CLI:
For example, to modify the Traffic Quota Limit Exceeded Page message:
FortiOS 6.4.2 Administration Guide 800
Fortinet Inc.
System
config system replacemsg traffic-quota "per-ip-shaper-block"
set buffer "<html>
<head>
<title>
Traffic Quota Control
</title>
</head>
<body>
<font size=2>
<table width=\"100%\">
<tr>
<td bgcolor=#3300cc align=\"center\" colspan=2>
<font color=#ffffff>
<b>
Traffic blocked because exceeded session quota
</b>
</font>
</td>
</tr>
</table>
<br>
<br>
Traffic blocked because it exceeded the per IP shaper session quota. Please contact
the system administrator.
<br>
%%QUOTA_INFO%%
<br>
<br>
<hr>
</font>
</body>
</html>"
set header http
set format html
end
Replacement message images
Images can be added to replacement messages on:
l Disclaimer pages
l Login pages
l Declined disclaimer pages
l Login failed pages
l Login challenge pages
l Keepalive pages
The supported image formats are GIF, JPEG, TIFF, and PNG. The maximum file size
supported is 24 KB.
FortiOS 6.4.2 Administration Guide 801
Fortinet Inc.
System
Adding images to replacement messages
To add images to replacement messages in the GUI:
1. Go to System > Replacement Messages.
2. In the top menu, click Manage Images.
3. Click Create New.
4. Enter a name for the image.
5. Click Upload Image and locate the file.
6. Click OK.
The file is now visible in the list.
To add images to replacement messages in the CLI:
config system replacemsg-image
edit <image_name>
set image-type {gif | jpg | tiff | png}
set image-base64 <string>
next
end
FortiOS 6.4.2 Administration Guide 802
Fortinet Inc.
System
Replacement message groups
Replacement message groups allow users to customize replacement messages for individual policies and profiles.
There are two types of replacement message groups:
Type Usage Customizable categories
utm Used with UTM settings in firewall policies. l admin
l alertmail
l custom-message
l fortiguard-wf
l ftp
l http
l icap
l mail
l nac-quar
l spam
l sslvpn
l traffic-quota
l utm
l webproxy
auth Used with authentication pages in firewall l auth
policies. l webproxy
The messages added to a group do not need to be customized. The message body content, header type, and format will
use the default values if not customized.
To make replacement message groups visible in the GUI:
config system settings
set gui-replacement-message-groups enable
end
In the following example, two replacement message groups are created. The UTM message group includes custom
mail-related messages and is assigned to an email filter profile. The authentication message group has a custom
authentication success message that is applied to a proxy-based firewall policy that has an assigned email filter profile.
To create replacement message groups in the GUI:
1. Create the Security replacement message group:
a. Go to System > Replacement Message Groups.
b. Click Create New.
c. For Name, enter newutm.
d. In the Comments field, enter UTM message group.
e. For Group Type, select Security.
FortiOS 6.4.2 Administration Guide 803
Fortinet Inc.
System
f. Click OK.
2. Customize the replacement messages in the newutm group:
a. Go to System > Replacement Message Groups.
b. Edit the newutm group.
c. Select the AV Engine Load Error Email Block Message.
d. Edit the message and click Save.
e. Select the Partial Email Block Message.
f. Edit the message and click Save.
3. Create the Authentication replacement message group:
a. Go to System > Replacement Message Groups.
b. Click Create New.
c. For Name, enter newauth.
d. In the Comments field, enter Authentication message group.
e. For Group Type, select Authentication.
f. Click OK.
FortiOS 6.4.2 Administration Guide 804
Fortinet Inc.
System
4. Apply the newutm replacement message group to an email filter profile in the CLI:
config emailfilter profile
edit "newmsgs"
set replacemsg-group "newutm"
next
end
5. Apply the newauth replacement message group and the email filter profile to a firewall policy in the CLI:
config firewall policy
edit 1
...
set replacemsg-override-group "newauth"
set inspection-mode proxy
set emailfilter-profile "newmsgs"
...
next
end
To create replacement message groups in the CLI:
1. Create the replacement message groups:
config system replacemsg-group
edit "newutm"
set group-type utm
config mail
edit "partial"
set buffer "Fragmented emails are blocked, sorry."
next
edit "email-av-fail"
set buffer "The email has been blocked for reasons."
next
end
next
edit "newauth"
set group-type auth
config auth
edit "auth-success-msg"
set buffer "Welcome to the firewall. Your authentication has been
accepted, please reconnect."
set header none
set format text
next
end
next
end
2. Apply the message group to the email filter:
config emailfilter profile
edit "newmsgs"
set replacemsg-group "newutm"
next
end
FortiOS 6.4.2 Administration Guide 805
Fortinet Inc.
System
3. Apply the email filter and message group to the policy:
config firewall policy
edit 1
...
set replacemsg-override-group "newauth"
set inspection-mode proxy
set emailfilter-profile "newmsgs"
...
next
end
FortiGuard
FortiGuard services can be purchased and registered to your FortiGate unit. The FortiGate must be connected to the
Internet in order to automatically connect to the FortiGuard Distribution Network (FDN) to validate the license and
download FDN updates.
The FortiGuard subscription update services include:
l Antivirus (AV)
l Intrusion Protection Service (IPS)
l Application Control
l Antispam
l Web Filtering
l Web Application Firewall (WAF)
To view FDN support contract information, go to System > FortiGuard. The License Information table shows the status of
your FortiGate’s support contract.
l IPv6 FortiGuard connections on page 807
l Configuring FortiGuard updates on page 807
l Manual updates on page 808
l Automatic updates on page 809
l Sending malware statistics to FortiGuard on page 810
l Update server location on page 811
l Filtering on page 812
l Override FortiGuard servers on page 813
l Online security tools on page 813
l FortiGuard anycast and third-party SSL validation on page 814
l Using FortiManager as a local FortiGuard server on page 816
l Cloud service communication statistics on page 817
l IoT detection service on page 818
l FortiAP query to FortiGuard IoT service to determine device details on page 820
FortiOS 6.4.2 Administration Guide 806
Fortinet Inc.
System
IPv6 FortiGuard connections
The Fortinet DNS can resolve FortiGuard related servers to both IPv4 and IPv6 addresses. FortiOS daemons (update,
forticldd, url) connect using either IPv4 or IPv6 addresses. The first available connection will be used for updates or the
rating service.
To configure an interface and route for IPv6:
config system interface
edit "wan1"
set vdom "root"
config ipv6
set ip6-address 2000:172:16:200::1/64
end
next
end
config router static6
edit 1
set gateway 2000:172:16:200::254
set device "wan1"
next
end
To configure push updates:
config system autoupdate push-update
set status enable
set override enable
set address "2620:101:9005:3860::94"
end
Configuring FortiGuard updates
To configure FortiGuard updates:
1. Go to System > FortiGuard
2. Scroll down to the FortiGuard Updates section.
3. Configure the antivirus and IPS options for connecting and downloading definition files:
Accept push updates Enable to allow updates to be sent automatically to your FortiGate. New
definitions will be added as soon as they are released by FortiGuard. See
Push updates on page 809.
Use override push Only available if Accept push updates is enabled. See Override push on page
810.
Scheduled Updates Enable to schedule updates to be sent to the FortiGate at the specified time.
See Scheduled updates on page 809.
FortiOS 6.4.2 Administration Guide 807
Fortinet Inc.
System
Improve IPS quality Enable to send information to the FortiGuard servers when an attack occurs.
This can help keep the FortiGuard database current as attacks evolve, and
improve IPS signatures.
Use extended IPS signature Enable to use the extended IPS database, that includes protection from legacy
package attacks, along with the regular IPS database that protects against the latest
common and in-the-wild attacks.
Update server location The FortiGuard update server location. See Update server location on page
811 for details.
4. Click Apply.
Manual updates
When needed, FortiGuard Distribution Network (FDN) updates can be manually uploaded.
To manually update the signature definitions files:
1. Log in to the Fortinet Support website.
2. Go to Download > FortiGuard Service Updates.
3. Select your OS Version from the dropdown list.
4. Locate your device in the table, and download the signature definitions files.
5. On the FortiGate, go to System > FortiGuard.
6. In the License Information table, locate and expand the definitions that you are updating, and click Upgrade
Database in the rightmost column.
7. In the pane that opens, click Upload, locate the downloaded definitions file on your computer, then click Open.
The download may take a few minutes to complete.
8. Click OK.
FortiOS 6.4.2 Administration Guide 808
Fortinet Inc.
System
Automatic updates
The FortiGate can be configured to request updates from FDN on a schedule, or via push notification.
Scheduled updates
Scheduling updates ensures that the virus and IPS definitions are downloaded to your FortiGate on a regular basis.
Updating definitions can cause a brief disruption in traffic that is currently being scanned while the FortiGate unit applies
the new signature database. Updates should be scheduled during off-peak hours when network usage is at a minimum
to ensure that network activity will not be affected by downloading the definitions files.
A schedule of once a week means any urgent updates will not be pushed until the scheduled
time. If an urgent update is required, click the Update Licenses & Definitions Now button to
manually update the definitions.
To configure scheduled updates in the GUI:
1. Go to System > FortiGuard
2. In the FortiGuard Updates section, enable Scheduled Updates.
3. Configure the update schedule:
4. Click Apply.
To configure scheduled updates in the CLI:
config system autoupdate schedule
set status enable
set frequency {every | daily | weekly}
set time <hh:mm>
set day <day_of_week>
end
Push updates
Push updates enable you to get immediate updates when new viruses or intrusions are discovered and new signatures
are created. This ensures that the latest signature are sent to the FortiGate as soon as possible.
When a push notification occurs, the FortiGuard server sends a notice to the FortiGate that a new signature definition file
available. The FortiGate then initiates a download of the definition file. For maximum security, both scheduled and push
updates should be enabled.
FortiOS 6.4.2 Administration Guide 809
Fortinet Inc.
System
To enable push updates - GUI:
1. Go to System > FortiGuard
2. In the FortiGuard Updates section, enable Accept push updates.
3. Click Apply.
To enable push updates in the CLI:
config system autoupdate push-update
set status enable
end
Override push
If the FortiGate is behind a NAT device (or another FortiGate), or if your organization provides updates using their own
FortiGuard server, an override server must be used to ensure that the FortiGate receives push update notifications. The
FDS will connect to the NAT device when attempting to reach the FortiGate, and the NAT device must be configured to
forward FDS traffic to the FortiGate on UDP port 9443.
Push updates must be enabled to configure a push update override.
For example, if the NAT device is another FortiGate:
1. On the FortiGate NAT device, add a port forwarding virtual IP address in Policy & Objects > Virtual IPs. See for
details.
2. On the FortiGate NAT device, add a security policy that connects to the internet and includes the port forwarding
VIP.
3. On the internal FortiGate device, configure Push update override.
To configure push update override in the GUI:
1. Go to System > FortiGuard
2. In the FortiGuard Updates section, enable Accept push updates.
3. Enable Use override push, and enter the IP address and port number configured on the NAT device.
4. Click Apply.
To configure push update override in the CLI:
config system autoupdate push-update
set status enable
set override
set address <vip_address>
set port <port_number>
end
Sending malware statistics to FortiGuard
FortiGate devices periodically send encrypted antivirus, IPS, botnet IP list, and application control statistics to
FortiGuard. Included with these data is the IP address and serial number of the FortiGate, and the country that it is in.
This information is never shared with external parties, Fortinet Privacy Policy.
FortiOS 6.4.2 Administration Guide 810
Fortinet Inc.
System
The malware statistics are used to improve various aspects of FortiGate malware protection. For example, antivirus data
allow FortiGuard to determine what viruses are currently active. Signatures for those viruses are kept in the Active AV
Signature Database that is used by multiple Fortinet products.Inactive virus signatures are moved to the Extended AV
Signature Database (see Configuring FortiGuard updates on page 807). When events for inactive viruses start
appearing in the malware data, the signatures are moved back into the AV Signature Database.
The FortiGate and FortiGuard servers go through a 2-way SSL/TLS 1.2 authentication before any data is transmitted.
The certificates used in this process must be trusted by each other and signed by the Fortinet CA server.
The FortiGate only accepts data from authorized FortiGuard severs. Fortinet products use DNS to find FortiGuard
servers and periodically update their FortiGate server list. All other servers are provided by a list that is updated through
the encrypted channel.
Malware statistics are accumulated and sent every 60 minutes by default.
To configure sharing this information, use the following CLI command:
config system global
set fds-statistics {enable | disable}
set fds-statistics-period <minutes>
end
The submission of malware data is in accordance with the Fortinet Privacy Policy.
There is no sensitive or personal information included in these submissions. Only malware
statistics are sent.
Fortinet uses the malware statistics collected in this manner to improve the performance of the
FortiGate services and to display statistics on the Fortinet Support website for customers
registered FortiGate devices.
Fortinet may also publish or share statistics or results derived from this malware data with
various audiences. The malware statistics shared in this way do not include any customer
data.
Update server location
The location of the FortiGuard update server that the FortiGate connects to can be set to either only servers in the USA
only, or to the servers with the lowest latency.
On hardware FortiGate devices, the default is Lowest latency locations. On VM devices, the default is US only.
To configure the update server location in the GUI:
1. Go to System > FortiGuard
2. In the FortiGuard Updates section, set Update server location to US only or Lowest latency locations.
3. Click Apply.
To configure the update server location in the CLI:
config system fortiguard
set update-server-location {usa | any}
end
FortiOS 6.4.2 Administration Guide 811
Fortinet Inc.
System
Filtering
Web filtering is used to block access to harmful, inappropriate, and dangerous web sites (see FortiGuard filter on page
1039).
Email filtering is used to detect and block spam messages (see FortiGuard-based filters on page 1116).
To configure filtering in the GUI:
1. Go to System > FortiGuard
2. Scroll down to the Filtering section.
3. Configure the settings as needed:
Web Filter Cache Enable/disable web filter cache, and set the amount of time that the FortiGate
will store a blocked IP address or URL locally. After the time expires, the
FortiGate contacts the FDN to verify the address.
Email Filter Cache Enable/disable email filter cache, and set the amount of time that the FortiGate
will store an email address locally.
FortiGuard filtering services The protocol and port used to contact the FortiGuard servers. These options
can be changed in the CLI.
Filtering Service Availability The status of the filtering service. Click Test Connectivity if the filtering service
is not available.
Request re-evaluation of a Click to re-evaluate a URL category rating on the FortiGuard web filter service.
URL's category
4. Click Apply.
To configure filtering in the CLI:
config system fortiguard
set protocol {https | udp}
set port {443 | 53 | 8888}
set antispam-force-off {enable | disable}
set antispam-cache {enable | disable}
set antispam-cache-ttl <integer>
set antispam-cache-mpercent <percent>
set antispam-timeout <integer>
set webfilter-force-off {enable | disable}
set webfilter-cache {enable | disable}
set webfilter-cache-ttl <integer>
FortiOS 6.4.2 Administration Guide 812
Fortinet Inc.
System
set webfilter-timeout <integer>
end
When anycast is enabled (by default) the protocol is HTTPS and the port is 443.
Override FortiGuard servers
By default, FortiOS will update signature packages and query rating servers using public FortiGuard servers. This list
can be overridden by adding servers to the override server list. Communication with public FortiGuard servers can also
be disabled.
To add an override FortiGuard server in the GUI:
1. Go to System > FortiGuard
2. In the Override FortiGuard Servers table, click Create New. The Create New Override FortiGuard Server pane
opens.
3. Select the server address type: IPv4, IPv6, or FQDN.
4. Enter the server address of the selected type in the Address field.
5. Select the type of server: AntiVirus & IPS Updates, Filtering, or Both.
6. Click OK, then click Apply.
To add an override FortiGuard server in the CLI:
config system central-management
set type fortiguard
config server-list
edit <integer>
set server-type {update rating}
set server-address <ip_address>
next
end
end
Online security tools
FortiGuard Labs provides a number of online security tools, including but not limited to:
l URL lookup
Enter a website address to see if it has been rated and what category and classification it is filed as. If you find a site
that has been wrongly categorized, use this page to request that the site be re-evaluated:
https://www.fortiguard.com/webfilter
FortiOS 6.4.2 Administration Guide 813
Fortinet Inc.
System
l Threat Encyclopedia
Browse FortiGuard Labs extensive encyclopedia of threats. Search for viruses, botnet C&C, IPS, endpoint
vulnerabilities, and mobile malware: https://www.fortiguard.com/encyclopedia
l Application Control
Browse FortiGuard Labs extensive encyclopedia of applications: https://www.fortiguard.com/appcontrol
FortiGuard anycast and third-party SSL validation
Anycast optimizes routing performance to FortiGuard servers. It is the default FortiGuard access mode.
Using Fortinet DNS servers, the FortiGate receives a single IP address for the domain name of each FortiGuard service.
BGP routing optimization is transparent to the FortiGate. The domain name of each FortiGuard service is the common
name in that service's certificate, which is signed by a third-party intermediate CA. The FortiGuard server uses third-
party certificate verification and the Online Certificate Status Protocol (OCSP) stapling check, so that the FortiGate can
always validate the FortiGuard server certificate efficiently.
FortiGate will only complete the TLS handshake with an anycast server that has a good OCSP status for its certificate.
Any other status will result in a failed SSL connection. OCSP stapling is reflected on the signature interval so that good
means that the certificate is not revoked at that timestamp. The FortiGuard servers query the CA's OCSP responder
every four hours and update its OCSP status. If the FortiGuard is unable to reach the OCSP responder, it will keep the
last known OCSP status for up to seven days. This cached OCSP status will be sent out immediately when a client
connection request is made, optimizing the response time.
FortiGuard represents all cloud based servers; see Anycast and unicast services for details.
The anycast server has one IP address to match its domain name. The FortiGate connects with a single server address,
using HTTPS and port 443, regardless of where the FortiGate is located.
FortiOS 6.4.2 Administration Guide 814
Fortinet Inc.
System
To configure the anycast FortiGuard access mode:
config system fortiguard
set fortiguard-anycast {enable | disable}
set fortiguard-anycast-source {fortinet | aws}
end
Connection process
The following process is used to connect to an anycast server:
1. The FortiGate embeds the CA_bundle certificate, which includes the root CA with CRL list and third-party
intermediate CA, in the root CA level.
2. The FortiGate finds the FortiGuard IP address from its domain name from DNS.
3. The FortiGate starts a TLS handshake with the FortiGuard IP address. The client hello includes an extension of the
status request.
4. The FortiGuard servers provide a certificate with its OCSP status: good, revoked, or unknown.
5. The FortiGate verifies the CA chain against the root CA in the CA_bundle.
6. The FortiGate verifies the intermediate CA's revoke status against the root CA's CRL.
7. The FortiGate verifies the FortiGuard certificate's OCSP status:
OCSP Response Data:
OCSP Response Status: successful (0x0)
Response Type: Basic OCSP Response
Version: 1 (0x0)
Responder Id: 3DD350A5D6A0ADEEF34A600A65D321D4F8F8D60F
Produced At: Aug 20 07:50:58 2019 GMT
Responses:
Certificate ID:
Hash Algorithm: sha1
Issuer Name Hash: 49F4BD8A18BF760698C5DE402D683B716AE4E686
Issuer Key Hash: 3DD350A5D6A0ADEEF34A600A65D321D4F8F8D60F
FortiOS 6.4.2 Administration Guide 815
Fortinet Inc.
System
Serial Number: 02555C9F3901B799DF1873402FA9392D
Cert Status: good
This Update: Aug 20 07:50:58 2019 GMT
Next Update: Aug 27 07:05:58 2019 GMT
Abort conditions include:
lThe CN in the server's certificate does not match the domain name resolved from the DNS.
l The OCSP status is not good.
l The issuer-CA is revoked by the root-CA.
8. Once the SSL handshake is established, the FortiGate can engage the server.
Example Wireshark PCAP:
Using FortiManager as a local FortiGuard server
FortiManager can provide a local FortiGuard server with port 443 access.
Anycast FortiGuard settings force the rating process to use port 443, even with an override server. Using a unique
address in the same subnet as the FortiManager access IP address, the FortiManager can provide local FortiGuard
updates and rating access with a dedicated IP address and port 443.
To use a FortiManager as a local FortiGuard server:
config system central-management
set type fortimanager
set fmg "172.18.37.148"
config server-list
edit 1
set server-type update
set server-address 172.18.37.150
next
edit 2
set server-type rating
set server-address 172.18.37.149
next
end
set fmg-update-port 443
set include-default-servers enable
end
FortiOS 6.4.2 Administration Guide 816
Fortinet Inc.
System
When fmg-update-port is set to 443, the update process will use port 443 to connect to the override update server,
which is the local FortiGuard server in the FortiManager. If this is not set, the update process will use port 8890, and the
server address setting has to be the FortiManager access IP address. Override FortiGuard services come from the
server list that is the local FortiGuard server in the FortiManager, and use the traditional, non-OCSP TLS handshake. If
override servers in the FortiManager are not available, the default FortiGuard servers are connected, and the anycast
OCSP TLS handshake is used.
Cloud service communication statistics
Fortinet service communications statistics are displayed on the FortiGuard page. The statistics correspond with the
output from diagnose sys service-communication. The traffic volume values in the GUI are the sums of data
from the last 24 hours.
To view Fortinet service communications statistics:
1. Go to System > FortiGuard.
The Fortinet Service Communications statistics are displayed on the right side of the screen:
2. Enter the following CLI command:
# diagnose sys service-communication
FortiCare:
The last 1 hour(in bytes): 0 0 0 0 0 0 0 0 0 0 0 0
The last 24 hours(in bytes): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
The last 7 days(in bytes): 0 0 0 0 0 0 0
FortiGuard Download:
The last 1 hour(in bytes): 0 0 0 336 1992 0 0 0 0 0 0 0
The last 24 hours(in bytes): 0 2328 6752 4450632 0 33696 0 5666528 0 49712 0 28840 0
29840 0 4185832 0 31488 0 76424 0 4226808 0 173880
The last 7 days(in bytes): 14454160 14985496 9532184 0 0 0 0
FortiGuard Query:
The last 1 hour(in bytes): 0 0 0 372 1107 0 0 0 0 0 0 0
The last 24 hours(in bytes): 0 1479 4828 929 0 929 0 929 0 929 0 929 0 929 0 1858 0 929
0 1858 0 1858 0 929
The last 7 days(in bytes): 13739 15793 13624 0 0 0 0
FortiOS 6.4.2 Administration Guide 817
Fortinet Inc.
System
FortiCloud Log:
The last 1 hour(in bytes): 0 343 563 899 1014 405 0 0 0 570 405 0
The last 24 hours(in bytes): 0 4535 6004 2184 684 1906 1938 680 861 1933 685 1020 687
1772 693 978 1023 1574 1195 697 1035 1323 1020 678
The last 7 days(in bytes): 26560 26136 0 0 0 0 0
FortiSandbox Cloud:
The last 1 hour(in bytes): 0 0 0 0 0 0 0 0 0 0 0 0
The last 24 hours(in bytes): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
The last 7 days(in bytes): 0 0 0 0 0 0 0
FortiGuard.com:
The last 1 hour(in bytes): 0 0 122162 123544 122162 244324 0 0 0 0 0 0
The last 24 hours(in bytes): 0 612192 532887 1939 1143 122162 44924 5039 0 125091 43096
1939 0 123305 43090 1939 0 123305 43096 1939 0 122162 42478 4930
The last 7 days(in bytes): 1658746 1347340 1421746 0 0 0 0
OCVPN Service:
The last 1 hour(in bytes): 1044 9382 0 0 0 0 0 0 0 0 0 0
The last 24 hours(in bytes): 1044 9382 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
The last 7 days(in bytes): 10426 0 0 0 0 0 0
SDNS Service:
The last 1 hour(in bytes): 0 0 0 0 0 0 0 0 0 0 0 0
The last 24 hours(in bytes): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
The last 7 days(in bytes): 0 0 0 0 0 0 0
FortiToken Registration:
The last 1 hour(in bytes): 0 0 0 0 0 0 0 0 0 0 0 0
The last 24 hours(in bytes): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
The last 7 days(in bytes): 0 0 0 0 0 0 0
SMS Service:
The last 1 hour(in bytes): 0 0 0 0 0 0 0 0 0 0 0 0
The last 24 hours(in bytes): 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
The last 7 days(in bytes): 0 0 0 0 0 0 0
IoT detection service
Internet of Things (IoT) detection is a subscription service that allows FortiGate to detect unknown devices in FortiGuard
that are not detected by the local Device Database (CIDB). When the service is activated, FortiGate can send device
information to the FortiGuard collection server. When a new device is detected, FortiGate queries the results from the
FortiGuard query for more information about the device.
This feature requires an IoT Detection Service license.
FortiGate device requirements:
The FortiGate device must be:
l Registered with FortiCare
l Connected to an anycast FortiGuard server
How the service works:
1. Enable Device Detection on an interface..
2. FortiGate uses the interface to detect device traffic flow.
3. Upon detecting traffic from an unknown device, FortiGate sends the device data to the FortiGuard collection server.
4. The collection server returns data about the new device to the FortiGuard query server.
FortiOS 6.4.2 Administration Guide 818
Fortinet Inc.
System
5. If the device signature does not appear in the local Device Database (CIDB) or some fields are not complete,
FortiGate queries FortiGuard for more information about the device.
To view the latest device information in the GUI, go to Dashboard > Users & Devices and expand the Device Inventory
widget.
To debug the daemon in the CLI:
1. Disable the local device database in order to force all queries to go to FortiGuard.
# diagnose src-vis local-sig disable
2. Enable iotd debugs.
# diagnose debug application iotd -1
# diagnose debug enable
FortiGate sends the device data to the FortiGuard collection server.
FortiWiFi-60E # [iotd] recv request from caller size:61
[iotd] service:collect hostname: ip: fd:-1 request tlv_len:41
[iotd] txt(.....y...w.....Jasons-iPhone6....579=23..)
[iotd] hex
(02010007017903060f77fc0203000e4a61736f6e732d6950686f6e6536020400083537393d32330cf
f)
[iotd] service:collect hostname:qadevcollect.fortinet.net ip: fd:-1 got server hostname
[iotd] service:collect hostname:qadevcollect.fortinet.net ip:192.168.100.133 fd:-1 got
server ip
[iotd] service:collect hostname:qadevcollect.fortinet.net ip:192.168.100.133 fd:13
socket created
[iotd] service:collect hostname:qadevcollect.fortinet.net ip:192.168.100.133 fd:13
connecting
[iotd] fd:13 monitor event:pollout
[iotd] service:collect hostname:qadevcollect.fortinet.net ip:192.168.100.133 fd:13 build
req packet
[iotd] service:collect hostname:qadevcollect.fortinet.net ip:192.168.100.133 fd:13
collect resp:1(pending)
The FortiGuard collection server returns new device data to the FortiGuard query server.
[iotd] service:query hostname:qadevquery.fortinet.net ip:192.168.100.248 fd:17 got query
resp
[iotd] service:query hostname:qadevquery.fortinet.net ip:192.168.100.248 fd:17 id:0
total_len:48 header_len:16 tlv_len:32 confidence:100 mac:f8:87:f1:1f:ab:95
[iotd] service:query hostname:qadevquery.fortinet.net ip:192.168.100.248 fd:17
remaining_len:32 type:1 len:6
FortiOS 6.4.2 Administration Guide 819
Fortinet Inc.
System
[iotd] service:query hostname:qadevquery.fortinet.net ip:192.168.100.248 fd:17 got tlv
category:'Mobile'
[iotd] service:query hostname:qadevquery.fortinet.net ip:192.168.100.248 fd:17
remaining_len:24 type:2 len:6
[iotd] service:query hostname:qadevquery.fortinet.net ip:192.168.100.248 fd:17 got tlv
sub_category:'Mobile'
[iotd] service:query hostname:qadevquery.fortinet.net ip:192.168.100.248 fd:17
remaining_len:16 type:3 len:5
[iotd] service:query hostname:qadevquery.fortinet.net ip:192.168.100.248 fd:17 got tlv
vendor:'Apple'
[iotd] service:query hostname:qadevquery.fortinet.net ip:192.168.100.248 fd:17
remaining_len:9 type:4 len:0
[iotd] service:query hostname:qadevquery.fortinet.net ip:192.168.100.248 fd:17
remaining_len:7 type:5 len:3
[iotd] service:query hostname:qadevquery.fortinet.net ip:192.168.100.248 fd:17 got tlv
os:'iOS'
[iotd] service:query hostname:qadevquery.fortinet.net ip:192.168.100.248 fd:17
remaining_len:2 type:6 len:0
[iotd] service:query hostname:qadevquery.fortinet.net ip:192.168.100.248 fd:17 send
query response to caller size:48
[iotd] txt(............d0 ...Mobile..Mobile..Apple....iOS..)
[iotd] hex
(f887f11fab950000000000006430200001064d6f62696c6502064d6f62696c6503054170706c650400
0503694f530600)
[iotd] service:query hostname:qadevquery.fortinet.net ip:192.168.100.248 fd:17 read
resp:0(good)
3. The query returns the device information including the information source (src fortiguard).
# diagnose user device list
vd root/0 f8:87:f1:1f:ab:95 gen 26 req OUA/34
created 503s gen 23 seen 102s lan gen 7
ip 192.168.1.110 src arp
hardware vendor 'Apple' src fortiguard id 0 weight 100
type 'Mobile' src fortiguard id 0 weight 100
family 'Mobile' src fortiguard id 0 weight 100
os 'iOS' src fortiguard id 0 weight 100
host 'Jasons-iPhone6' src dhcp
FortiAP query to FortiGuard IoT service to determine device details
A FortiAP collects packets from devices and queries FortiGuard with the help of the FortiGate. Device detection results
are reported back to the FortiGate where this information is displayed. Querying the FortiGuard service requires an IoT
Detection Service license.
The following attributes can be configured in wireless-controller setting:
Attribute Description
device-weight <integer> Set the device upper limit of confidence (0 - 255, default = 1, 0 = disable).
device-holdoff <integer> Set the device lower limit of creation time, in minutes (0 - 60, default = 5).
device-idle <integer> Set the device upper limit of idle time, in minutes (0 - 14400, default = 1440).
FortiOS 6.4.2 Administration Guide 820
Fortinet Inc.
System
To query the FortiGuard IoT service:
config wireless-controller setting
...
set device-weight 1
set device-holdoff 5
set device-idle 1440
...
end
# diagnose user device list
vd root/0 54:27:1e:e6:26:3d gen 89 req OUA/34
created 70s gen 86 seen 2s port29 gen 28
ip 10.29.1.214 src mac
hardware vendor 'Asustek compute' src fortiguard id 0 weight 21
type 'Home & Office' src fortiguard id 0 weight 21
family 'Computer' src fortiguard id 0 weight 21
os 'Linux' src dhcp id 822 weight 128
host 'test-wifi' src dhcp
Feature visibility
Feature visibility is used to control which features are visible in the GUI. This allows features that are not in use to be
hidden. Some features are also invisible by default and must be made visible before they can be configure in the GUI.
The visibility of a feature does not affect its functionality or configuration. Invisible features can still be configured using
the CLI.
To change the visibility of features:
1. Go to System > Feature Visibility.
2. Change the visibility of the features as required. To simplify setting security features, a feature set can be selected
from the dropdown list.
For information about what settings each options affects, click on the + icon to the right of the feature name.
Changes are listed on the right of the screen.
3. Click Apply.
Security feature presets
Six system presets are available:
l NGFW: for networks that require application control and protection from external attacks.
l ATP: for networks that require protection from viruses and other external threats.
l WF: for networks that require web filtering.
l NGFW + ATP: for networks that require protection from external threats and attacks.
l UTM: for networks that require protection from external threats and wish to use security features that control
network usage. This is the default setting.
l Full UTM: for networks that require the normal UTM features, as well as antivirus, application control, endpoint
control, and web filtering.
FortiOS 6.4.2 Administration Guide 821
Fortinet Inc.
System
l Custom should be chosen for networks that require customization of available features (including the ability to
select all features).
Certificates
The following topics provide instructions about certificates:
l Microsoft CA deep packet inspection on page 822
l Purchase and import a signed SSL certificate on page 827
Microsoft CA deep packet inspection
In most production environments, you want to use a certificate issued be your own PKI for deep packet inspection (DPI).
An existing Microsoft root CA can be used to issue a subordinate CA (sub CA) certificate that is installed as a DPI
certificate on the FortiGate.
Complete the following steps to create your own sub CA certificate and use it for DPI:
1. Create a Microsoft sub CA certificate
2. Export the certificate and private key
3. Import the certificate and private key into the FortiGate
4. Configure a firewall policy for DPI
5. Verify that the sub CA certificate is being used for DPI
The FortiGate firewall uses information in the original web server certificate, then issues a new certificate signed by the
Microsoft DPI certificate. The FortiGate then sends this certificate with the issuing DPI certificate to the client's web
browser when the SSL session is being established.
The browser verifies that the certificate was issued by a valid CA, then looks for the issuing CA of the Microsoft DPI
certificate in its loca trusted root CA store to complete the path to trusted root CA.
The Microsoft CA root certificate is normally deployed to all client PCs in the Windows domain, so the client can
complete the certificate path up to a trusted root CA. The FortiGate now controlsand can inspect the two HTTPS
sessions: one with the external web server, and one with the client PC.
Create a Microsoft sub CA certificate
A Microsoft sub CA certificate can be created on a Microsoft CA server, or remotely using a web browser.
Creating a certificate remotely requires that the web enrollment option is configured on the Microsoft CA server. Remote
certificate requests require HTTPS; requests are not allowed with HTTP.
To create a Microsoft sub CA certificate remotely:
1. Open a web browser and go to one of the following URLs:
l https://<FQDN-CA-server>/CertSrv
l https://<IP-CA-server>/CertSrv.
FortiOS 6.4.2 Administration Guide 822
Fortinet Inc.
System
2. Log in to a domain administrator account that has web enrollment rights.
3. Click Request a certificate.
4. Click advanced certificate request.
5. Click Create and submit a request to this CA, then click Yes in the Web Access Confirmation warning.
6. For the Certificate Template, select Subordinate Certification Authority.
7. Enable Mark keys as exportable.
8. Fill out the remaining information according to your security policy.
9. Submit the request.
10. Click Yes in the Web Access Confirmation warning.
11. Click Install this certificate.
The certificate and private key are located in the current user's certificate store.
FortiOS 6.4.2 Administration Guide 823
Fortinet Inc.
System
Export the certificate and private key
To export the certificate and private key:
1. Open the Microsoft Management Console (MMC) and add the Certificate Snap-in.
2. Go to the user's certificate store to locate the sub CA certificate that you just installed.
3. Right-click on the certificate and select All Tasks > Export.
4. Click Next to start the Microsoft Certificate Export Wizard.
5. Follow the steps in the wizard:
l When asked, select Yes, export the private key.
l Only the PKCS #12 (.PFX) format is available, and it requires a password.
l When selecting the encryption type, select TripleDES-SHA1 if you are using an older version of FortiOS (5.6.9
and earlier). Otherwise, select AES256-SHA256.
6. Complete the wizard, and save the DPI certificate to a local folder.
Import the certificate and private key into the FortiGate
The certificate can be imported from the local computer using the GUI, or from a TFTP server using the CLI.
After importing the certificate, you can view it in the GUI to verify that it was successfully imported.
To import the certificate and private key into the FortiGate in the GUI:
1. Go to System > Certificates.
2. Select Import > Local Certificate.
3. Set Type to PKCS #12 Certificate.
4. Click Upload and locate the certificate file.
5. Enter the Password.
FortiOS 6.4.2 Administration Guide 824
Fortinet Inc.
System
6. Optionally, modify the Certificate Name.
7. Click OK.
To import the certificate and private key into the FortiGate in the CLI:
execute vpn certificate local import <certificate file name> <tftp ip address> <password>
To verify that the certificate was imported:
1. Go to System > Certificates. By default, the Certificate option is not visible, see Feature visibility on page 821 for
information.
2. Locate the newly imported certificate in the table.
3. Select the certificate and click View Details to view the certificate details.
Configure a firewall policy for DPI
The certificate is used in an SSL/SSH inspection profile that is then used in a firewall policy.
FortiOS 6.4.2 Administration Guide 825
Fortinet Inc.
System
To configure a firewall policy for DPI:
1. Go to Security Profiles > SSL/SSH Inspection.
2. Click Create New.
3. Configure the inspection profile, selecting the new certificate
4. Click Apply.
5. Go to Policy & Objects > Firewall Policy.
6. Create a new policy, or edit an existing policy.
7. In the SSL Inspection field, select the new SSL inspection profile.
8. Configure the remaining settings as needed.
9. Click OK.
FortiOS 6.4.2 Administration Guide 826
Fortinet Inc.
System
Verify that the sub CA certificate is being used for DPI
You can verify that the certificate is being used for resigning web server certificates when a user connects to an external
HTTPS website.
To verify that the certificate is being used:
1. On a client PC that is behind the FortiGate, go to an external HTTPS website.
When connecting to the website, no certificate warning should be shown.
2. In your web browser, view the certificate and certificate path.
The methods for doing this vary depending on the browser. See your browsers documentation for information.
Purchase and import a signed SSL certificate
A signed SSL certificate can be used when configuring SSL VPN, for administrator GUI access, and for other functions
that require a certificate.
Before creating a certificate, you must have a registered domain.
Follow these instructions to purchase, import, and use a signed SSL certificate:
l Purchase, setup, and download an SSL certificate package from a certificate authority
l Generate a CSR
l Import the signed certificate into your FortiGate
l Configure your FortiGate device to use the signed certificate
Purchase, setup, and download an SSL certificate package from a certificate authority
SSL certificate packages can be purchased from any Certificate Authority (CA), such as DigiCert, GoDaddy, or
GlobalSign.
A third party CA might not sign a certificate with an intranet name or IP address. For details,
see Can I request a certificate for an intranet name or IP address?
The process for purchasing, setting up, and downloading a certificate will vary depending on the CA that is used, and if a
CSR must be generated on the FortiGate.
To purchase a certificate package:
1. Create an account with your chosen vendor, or use the account that you used to purchase your domain.
2. Locate the SSL Certificates page.
3. Purchase a basic SSL certificate for domain validation only. If required, a more secure SSL certificate can be
purchased.
FortiOS 6.4.2 Administration Guide 827
Fortinet Inc.
System
4. If required, load the CSR, either by uploaded the text file or copying and pasting the contents into the requisite text
box. See Generate a CSR on page 828 for information on generating the CSR on the FortiGate.
5. If required, set the server type to Other.
6. Verify the certificate per the requirements of the CA.
7. Download the signed certificate to your computer.
8. Import the signed certificate into your FortiGate; see Import the signed certificate into your FortiGate on page 829.
Generate a CSR
Some CAs can auto-generate the CSR during the signing process, or provide tools for creating CSRs. If necessary, a
CSR can be created in your FortiGate device’s GUI.
To generate a CSR on your FortiGate:
1. Go to System > Certificates. By default, the Certificate option is not visible, see Feature visibility on page 821 for
information.
2. Click Generate. The Generate Certificate Signing Request page opens.
3. Configure the CSR request:
l Ensure that the certificate has a unique name.
l Set the ID Type to Domain Name and enter a Domain Name.
l An email address is required.
l Ensure that the Key Size is set to 2048 Bit.
l Set the Enrollment Method to File Based.
4. Click OK.
The CSR will be added to the certificate list with a status of PENDING.
5. In the certificate list, select the new CSR then click Download to save the CSR to your computer.
The CSR file can be opened in any text editor, and will resemble the following:
-----BEGIN CERTIFICATE REQUEST-----
MIICuTCCAaECAQAwSzEcMBoGA1UEAxMTZm9ydGlzc2x2cG5kZW1vLmNvbTErMCkG
CSqGSIb3DQEJARYcZm9ydGlzc2x2cG5kZW1vQGZvcnRpbmV0LmNvbTCCASIwDQYJ
FortiOS 6.4.2 Administration Guide 828
Fortinet Inc.
System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-----END CERTIFICATE REQUEST-----
Import the signed certificate into your FortiGate
To import the signed certificate into your FortiGate:
1. Unzip the file downloaded from the CA.
There should be two CRT files: a CA certificate with bundle in the file name, and a local certificate.
2. Log in to your FortiGate unit and go to System > Certificates.
3. Click Import > Local Certificate.
4. Upload the local certificate file, then click OK.
5. The status of the certificate will change from PENDING to OK.
6. Click Import > CA Certificate.
7. Set the Type to File, upload the CA certificate file, then click OK.
The CA certificate will be listed in the CA Certificates section of the certificates list.
Configure your FortiGate device to use the signed certificate
After the signed certificates have been imported, you can use it when configuring SSL VPN, for administrator GUI
access, and for other functions that require a certificate.
To configure your FortiGate to use the signed certificate for SSL VPN:
1. Go to VPN > SSL-VPN Settings.
2. Set Server Certificate to the new certificate.
FortiOS 6.4.2 Administration Guide 829
Fortinet Inc.
System
3. Configure other settings as needed.
4. Click Apply.
For more information on configuring SSL VPN, see SSL VPN on page 1410 and the Setup SSL VPN video in the Fortinet
Video Library.
To configure using the certificate for administrator GUI access in the CLI:
config system global
set admin-server-cert fortisslvpndemo
end
To change the certificate that is used for administrator GUI access in the GUI:
1. Go to System > Settings.
2. In the Administration Settings section, change HTTPS server certificate as needed.
3. Click Apply. You will be logged out of FortiOS.
Configuration scripts
Configuration scripts are text files that contain CLI command sequences. They can be created using a text editor or
copied from a CLI console, either manually or using the Record CLI Script function.
Scripts can be used to run the same task on multiple devices. For example, if your devices use the same security
policies, you can enter or record the commands to create those policies in a script, and then run the script on each
device. You could also create the policies in the GUI, and then copy and paste the CLI commands from the CLI Console
using the show command.
If the FortiGate is managed by FortiManager, scripts can be uploaded to FortiManager and then run on any other
FortiGates that are managed by that FortiManager. See Scripts in the FortiManager Administration Guide.
A comment line in a script starts with the number sign (#). Comments are not executed.
To run a script using the GUI:
1. Click on your username and select Configuration > Scripts.
2. Click Run Script.
3. Select the text file containing the script on your management computer, then click OK.
The script runs immediately, and the Script Execution History table is updated, showing if the script ran
successfully.
FortiOS 6.4.2 Administration Guide 830
Fortinet Inc.
System
Workspace mode
Workspace mode allows administrators to make a batch of changes that are not implemented until the transaction is
committed. Prior to committing, the changes can be reverted or edited as needed without impacting current operations.
When an object is edited in workspace mode it is locked, preventing other administrators from editing that object. A
warning message will be shown to let the administrator know that the object is currently being configured in another
transaction.
All administrators can use workspace mode; their permissions in workspace mode are the same as defined in their
account profile.
A workspace mode transaction times out after five minutes if there is no activity. When a transaction times out, all
changes are discarded. A warning message will be shown to let the administrator know that a timeout is imminent, or has
already happened:
config transaction id=1 will expire in 30 seconds
config transaction id=1 will expire in 20 seconds
config transaction id=1 will expire in 10 seconds
config transaction id=1 has expired
The following commands are not changeable in a workspace transaction:
config system console
config system resource-limits
config system elbc
config system global
set split-port
set vdom-admin
set management-vdom
set wireless-mode
set internal-switch-mode
end
config system settings
set opmode
end
config system npu
config system np6
config system wireless
set mode
end
config system vdom-property
config system storage
FortiOS 6.4.2 Administration Guide 831
Fortinet Inc.
System
The execute batch command cannot be used in or to start workspace mode.
To use workspace mode:
1. Start workspace mode:
execute config-transaction
Once in workspace mode, the administrator can make configuration changes, all of which are made in a local CLI
process that is not viewable by other processes.
2. Commit configuration changes:
execute config-transaction commit
After performing the commit, the changes are available for all other processes, and are also made in the kernel.
3. Abort configuration changes:
execute config-transaction abort
If changes are aborted, no changes are made to the current configuration or the kernel.
Diagnose commands
diagnose sys config-transaction show txn-meta
Show config transaction meta information. For example:
# diagnose sys config-transaction show txn-meta
txn_next_id=8, txn_nr=2
diagnose sys config-transaction show txn-info
Show config transaction information. For example:
# diagnose sys config-transaction show txn-info
current_jiffies=680372
txn_id=6, expire_jiffies=706104, clicmd_fpath='/dev/cmdb/txn/6_EiLl9G.conf'
txn_id=7, expire_jiffies=707427, clicmd_fpath='/dev/cmdb/txn/7_UXK6wY.conf'
diagnose sys config-transaction show txn-entity
Show config transaction entity. For example:
# diagnose sys config-transaction show txn-entity
vd='global', cli-node-oid=37(system.vdom), txn_id=7. location: fileid=0, storeid=0,
pgnr=0, pgidx=0
vd='global', cli-node-oid=46(system.interface), txn_id=7. location: fileid=3,
storeid=0, pgnr=0, pgidx=0
diagnose sys config-transaction show txn-lock
Show transaction lock status. For example:
# diagnose sys config-transaction show txn-lock
type=-1, refcnt=0, value=256, pid=128
diagnose sys config-transaction status
Show the transaction status in the current CLI.
Custom languages
FortiOS 6.4.2 Administration Guide 832
Fortinet Inc.
System
Custom languages can be uploaded and used for SSL VPN web portals. Custom languages must be enabled before
they can be added in the GUI.
To enable custom languages:
config system global
set gui-custom-language enable
end
To configure a custom language in the GUI:
1. Go to System > Custom Languages and click Create New.
2. Enter the name of the language.
3. Optionally, enter a comment.
4. Click Upload and upload the language JSON file from your management computer.
5. Click OK.
To configure a language in an SSL VPN web portal in the GUI:
1. Go to VPN > SSL-VPN Portals.
2. Edit an existing portal, or click Create New to create a new one.
3. Enable Web Mode, then select the language from the Language field.
4. Click OK.
To configure a custom language in the CLI:
config system custom-language
edit <language>
set filename <file>
next
end
To configure a language in an SSL VPN web portal in the GUI:
config vpn ssl web portal
edit <portal>
set web-mode enable
set custom-lang <language>
next
end
FortiOS 6.4.2 Administration Guide 833
Fortinet Inc.
Policy and Objects
This section contains topics on configuring policies and traffic shaping:
l Policies on page 834
l Objects on page 924
l Traffic shaping on page 951
Policies
The firewall policy is the axis around which most features of the FortiGate revolve. Many firewall settings end up relating
to or being associated with the firewall policies and the traffic they govern. Any traffic going through a FortiGate has to be
associated with a policy. These policies are essentially discrete compartmentalized sets of instructions that control the
traffic flow going through the firewall. These instructions control where the traffic goes, how it is processed, if it is
processed, and whether or not it is allowed to pass through the FortiGate.
When the firewall receives a connection packet, it analyzes the source address, destination address, and service (by
port number). It also registers the incoming interface, the outgoing interface it needs to use, and the time of day. Using
this information, the FortiGate firewall attempts to locate a security policy that matches the packet. If a policy matches
the parameters, then the FortiGate takes the required action for that policy. If it is Accept, the traffic is allowed to proceed
to the next step. If the action is Deny or a match cannot be found, the traffic is not allowed to proceed.
The two basic actions at the initial connection are either Accept or Deny:
l If the action is Accept, the policy permits communication sessions. There may be other packet processing
instructions, such as requiring authentication to use the policy or restrictions on the source and destination of the
traffic.
l If the action is Deny, the policy blocks communication sessions, and you can optionally log the denied traffic. If no
security policy matches the traffic, the packets are dropped. A Deny security policy is needed when it is required to
log the denied traffic, also called violation traffic.
One other action can be associated with the policy:
l IPsec: this is an Accept action that is specifically for IPsec VPNs.
The following topics provide instructions on configuring policies:
l Firewall policy parameters on page 835
l Profile-based NGFW vs policy-based NGFW on page 836
l NGFW policy mode application default service on page 840
l Application logging in NGFW policy mode on page 842
l Policy views and policy lookup on page 843
l Policy with source NAT on page 845
l Policy with destination NAT on page 859
l Policy with Internet Service on page 872
l NAT64 policy and DNS64 (DNS proxy) on page 889
l NAT46 policy on page 892
FortiOS 6.4.2 Administration Guide 834
Fortinet Inc.
Policy and Objects
l Local-in policies on page 896
l IPv4/IPv6 access control lists on page 897
l Mirroring SSL traffic in policies on page 899
l Inspection mode per policy on page 901
l OSPFv3 neighbor authentication on page 904
l Firewall anti-replay option per policy on page 906
l Enabling advanced policy options in the GUI on page 906
l Recognize anycast addresses in geo-IP blocking on page 907
l Matching GeoIP by registered and physical location on page 908
l Authentication policy extensions on page 910
l HTTP to HTTPS redirect for load balancing on page 911
l GTPv2 in policies on page 912
l Use active directory objects directly in policies on page 914
l FortiGate Cloud / FDN communication through an explicit proxy on page 917
l No session timeout on page 919
l MAP-E support on page 920
Firewall policy parameters
For traffic to flow through the FortiGate firewall, there must be a policy that matches its parameters:
l Incoming interface(s)
l Outgoing interface(s)
l Source address(es)
l User(s) identity
l Destination address(es)
l Internet service(s)
l Schedule
l Service
Without all six (possibly eight) of these things matching, the traffic is declined.
Traffic flow initiated from each direction requires a policy, that is, if sessions can be initiated from both directions, each
direction requires a policy.
Just because packets can go from point A to point B on port X does not mean that the traffic can flow from point B to point
A on port X. A policy must be configured for each direction.
When designing a policy, there is often reference to the traffic flow, but most communication is two-way so trying to
determine the direction of the flow might be confusing. If traffic is HTTP web traffic, the user sends a request to the
website, but most of the traffic flow will be coming from the website to the user or in both directions? For the purposes of
determining the direction for a policy, the important factor is the direction of the initiating communication. The user is
sending a request to the website, so this is the initial communication; the website is responding so the traffic is from the
user's network to the Internet.
FortiOS does not perform a reverse-path check on reply traffic that matches an allowed
session based on the IP tuple. The request traffic can be sent on one interface and the reply
traffic could return on another interface.
FortiOS 6.4.2 Administration Guide 835
Fortinet Inc.
Policy and Objects
Profile-based NGFW vs policy-based NGFW
Profile-based next-generation firewall (NGFW) mode is the traditional mode where you create a profile (antivirus, web
filter, and so on) and then apply the profile to a policy.
In policy-based NGFW mode, you allow applications and URL categories to be used directly in security policies, without
requiring web filter or application control profiles.
In policy-based mode:
l Central NAT is always enabled. If no Central SNAT policy exists, you must create one. See Central SNAT on page
852 for more information.
l Pre-match rules are defined separately from security policies, and define broader rules, such as SSL inspection and
user authentication.
If your FortiGate operates in NAT mode, rather than enabling source NAT in individual NGFW policies, go to Policy &
Objects > Central SNAT and add source NAT policies that apply to all matching traffic. In many cases, you may only
need one SNAT policy for each interface pair.
The NGFW mode is set per VDOM, and it is only available when the VDOM inspection mode is flow-based. You can
operate your entire FortiGate or individual VDOMs in NGFW policy mode.
Switching from profile-based to policy-based mode converts your policies to policy-based. To
avoid issues, you could create a new VDOM for the policy-based mode. We recommend
backing up your configuration before switching modes. See Configuration backups on page 53
for information.
Enabling policy-based NGFW mode
To enable policy-based NGFW mode without VDOMs in the GUI:
1. Go to System > Settings.
2. In NGFW Mode, select Policy-based.
3. Click Apply.
To enable policy-based NGFW mode with VDOMs in the GUI:
1. Go to System > VDOM .
2. Double-click a VDOM to edit the settings.
3. In NGFW Mode, select Policy-based.
4. Click OK.
To enable policy-based NGFW mode without VDOMs in the CLI:
config system settings
set ngfw-mode policy-based
end
FortiOS 6.4.2 Administration Guide 836
Fortinet Inc.
Policy and Objects
To enable policy-based NGFW mode with VDOMs in the CLI:
config vdom
edit <vdom>
config system settings
set ngfw-mode policy-based
end
next
end
Security and SSL Inspection & Authentication policies
Security policies work with SSL Inspection & Authentication policies to inspect traffic. To allow traffic from a specific user
or user group, both Security and SSL Inspection & Authentication policies must be configured. A default SSL Inspection
& Authentication policy with the certificate-inspection SSL Inspection profile is preconfigured. Traffic will match the SSL
Inspection & Authentication policy first. If the traffic is allowed, packets are sent to the IPS engine for application, URL
category, user, and user group match, and then, if enabled, UTM inspection (antivirus, IPS, DLP, and email filter) is
performed.
SSL Inspection & Authentication policies are used to pre-match traffic before sending the packets to the IPS engine:
l There are no schedule or action options; traffic matching the policy is always redirected to the IPS engine.
l SSL inspection, formerly configured in the VDOM settings, is configured in an SSL Inspection & Authentication
policy.
l Users and user groups that require authentication must be configured in an SSL Inspection & Authentication policy.
Security policies work with SSL Inspection & Authentication policies to inspect traffic:
l Applications and URL categories can be configured directly in the policy.
l Users and user groups that require authentication must also be configured in a security policy.
l The available actions are Accept or Deny.
l The Service option can be used to enforce the standard port for the selected applications. See NGFW policy mode
application default service on page 840 for details.
l UTM inspection is configured in a security policy.
FortiOS 6.4.2 Administration Guide 837
Fortinet Inc.
Policy and Objects
To configure policies for Facebook and Gmail access in the CLI:
1. Configure an SSL Inspection & Authentication policy:
config firewall policy
edit 1
set name "Policy-1"
set srcintf "port18"
set dstintf "port17"
set srcaddr "all"
set dstaddr "all"
set service "ALL"
set ssl-ssh-profile "new-deep-inspection"
set groups "Dev" "HR" "QA" "SYS"
next
end
2. Configure security policies:
config firewall security-policy
edit 2
set name "allow-QA-Facebook"
set srcintf "port18"
set dstintf "port17"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set application 15832
set groups "Dev" "QA"
next
edit 4
set name "allow-QA-Email"
set srcintf "port18"
set dstintf "port17"
FortiOS 6.4.2 Administration Guide 838
Fortinet Inc.
Policy and Objects
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set url-category 23
set groups "QA"
next
end
Logs
In the application control and web filter logs, securityid maps to the security policy ID.
Application control log:
date=2019-06-17 time=16:35:47 logid="1059028704" type="utm" subtype="app-ctrl"
eventtype="signature" level="information" vd="vd1" eventtime=1560814547702405829 tz="-0700"
appid=15832 user="Jack" group="QA" srcip=10.1.100.102 dstip=157.240.3.29 srcport=56572
dstport=443 srcintf="port18" srcintfrole="undefined" dstintf="port17"
dstintfrole="undefined" proto=6 service="P2P" direction="incoming" policyid=1
sessionid=42445 appcat="Social.Media" app="Facebook" action="pass" hostname="external-sea1-
1.xx.fbcdn.net" incidentserialno=1419629662 url="/" securityid=2 msg="Social.Media:
Facebook," apprisk="medium" scertcname="*.facebook.com" scertissuer="DigiCert SHA2 High
Assurance Server CA"
Web filter log:
date=2019-06-17 time=16:42:41 logid="0317013312" type="utm" subtype="webfilter"
eventtype="ftgd_allow" level="notice" vd="vd1" eventtime=1560814961418114836 tz="-0700"
policyid=4 sessionid=43201 user="Jack" group="QA" srcip=10.1.100.102 srcport=56668
srcintf="port18" srcintfrole="undefined" dstip=172.217.3.165 dstport=443 dstintf="port17"
dstintfrole="undefined" proto=6 service="HTTPS" hostname="mail.google.com"
action="passthrough" reqtype="direct" url="/" sentbyte=709 rcvdbyte=0 direction="outgoing"
msg="URL belongs to an allowed category in policy" method="domain" cat=23 catdesc="Web-based
Email" securityid=4
Traffic logs:
date=2019-06-17 time=16:35:53 logid="0000000013" type="traffic" subtype="forward"
level="notice" vd="vd1" eventtime=1560814553778525154 tz="-0700" srcip=10.1.100.102
srcport=56572 srcintf="port18" srcintfrole="undefined" dstip=157.240.3.29 dstport=443
dstintf="port17" dstintfrole="undefined" poluuid="b740d418-8ed3-51e9-5a7b-114e99ab6370"
sessionid=42445 proto=6 action="server-rst" user="Jack" group="QA" policyid=1
policytype="consolidated" centralnatid=1 service="HTTPS" dstcountry="United States"
srccountry="Reserved" trandisp="snat" transip=172.16.200.2 transport=56572 duration=6
sentbyte=276 rcvdbyte=745 sentpkt=5 rcvdpkt=11 appid=15832 app="Facebook"
appcat="Social.Media" apprisk="medium" utmaction="allow" countapp=1 utmref=65531-294
2: date=2019-06-17 time=16:47:45 logid="0000000013" type="traffic" subtype="forward"
level="notice" vd="vd1" eventtime=1560815265058557636 tz="-0700" srcip=10.1.100.102
srcport=56668 srcintf="port18" srcintfrole="undefined" dstip=172.217.3.165 dstport=443
dstintf="port17" dstintfrole="undefined" poluuid="b740d418-8ed3-51e9-5a7b-114e99ab6370"
sessionid=43201 proto=6 action="timeout" user="Jack" group="QA" policyid=1
policytype="consolidated" centralnatid=1 service="HTTPS" dstcountry="United States"
srccountry="Reserved" trandisp="snat" transip=172.16.200.2 transport=56668 duration=303
sentbyte=406 rcvdbyte=384 sentpkt=4 rcvdpkt=4 appcat="unscanned" utmaction="allow"
countweb=1 utmref=65531-3486
FortiOS 6.4.2 Administration Guide 839
Fortinet Inc.
Policy and Objects
Other NGFW policy-based mode options
You can combine Application Control and Web Filter in the same NGFW mode policy.
The following security profiles can be used in NGFW policy-based mode:
l AntiVirus
l Web Filter
l Intrusion Prevention
l File Filter
l Email Filter
Logging can also be enabled in security policies.
NGFW policy mode application default service
In NGFW policy-based mode, the application default service enforces applications running only on their default service
port. The applications specified in the policy are monitored, and if traffic is detected from a nonstandard port, it is
blocked, and a log entry is recorded with a port-violation event type.
If you are not using the default ports, and need to pick specific services, select Specify to select the required services.
Example
In this example, the standard port is enforced for HTTPS traffic using the HTTP.Audio application.
First, an SSL Inspection & Authentication policy is created do to traffic pre-match, and then a security policy is created to
allow the HTTP.Audio application when using the default port. Fetching an MP3 file from an HTTP server using port 443
is allowed, but is blocked when using a nonstandard port, such as 8443.
To enforce the HTTP.Audio application using the default port in the GUI:
1. Create a new SSL Inspection & Authentication policy, or use the default policy.
2. Go to Policy & Objects > Security Policy, and click Create New.
3. Enter a name for the policy, such as allow_HTTP.Audio.
4. Configure the ports as needed.
5. Set Service to App Default.
6. In the Application field, select HTTP.Audio.
FortiOS 6.4.2 Administration Guide 840
Fortinet Inc.
Policy and Objects
7. Set the Action to Accept.
8. Click OK.
To enforce the HTTP.Audio application using the default port in the CLI:
1. Create a firewall policy:
config firewall policy
edit 1
set name "consolidated_all"
set srcintf "port13"
set dstintf "port14"
set srcaddr "all"
set dstaddr "all"
set service "ALL"
set ssl-ssh-profile "new-deep-inspection"
next
end
2. Create a security policy:
config firewall security-policy
edit 1
set name "allow_HTTP.Audio"
set srcintf "port13"
set dstintf "port14"
set srcaddr "all"
set enforce-default-app-port enable
set action accept
set schedule "always"
set logtraffic all
set application 15879
next
end
FortiOS 6.4.2 Administration Guide 841
Fortinet Inc.
Policy and Objects
Logs
The application logs show logs with an event type of port-violation for traffic on port 8443 that is blocked, and an
event type of signature for traffic on port 443 that is allowed.
Blocked:
2: date=2019-06-18 time=16:15:40 logid="1060028736" type="utm" subtype="app-ctrl"
eventtype="port-violation" level="warning" vd="vd1" eventtime=1560899740218875746 tz="-0700"
appid=15879 srcip=10.1.100.22 dstip=172.16.200.216 srcport=52680 dstport=8443
srcintf="port13" srcintfrole="undefined" dstintf="port14" dstintfrole="undefined" proto=6
service="HTTPS" direction="incoming" policyid=1 sessionid=5041 appcat="Video/Audio"
app="HTTP.Audio" action="block" hostname="172.16.200.216" incidentserialno=1906780850
url="/app_data/story.mp3" securityid=2 msg="Video/Audio: HTTP.Audio," apprisk="elevated"
Allowed:
1: date=2019-06-18 time=16:15:49 logid="1059028704" type="utm" subtype="app-ctrl"
eventtype="signature" level="information" vd="vd1" eventtime=1560899749258579372 tz="-0700"
appid=15879 srcip=10.1.100.22 dstip=172.16.200.216 srcport=54527 dstport=443
srcintf="port13" srcintfrole="undefined" dstintf="port14" dstintfrole="undefined" proto=6
service="HTTPS" direction="incoming" policyid=1 sessionid=5064 appcat="Video/Audio"
app="HTTP.Audio" action="pass" hostname="172.16.200.216" incidentserialno=1139663486
url="/app_data/story.mp3" securityid=2 msg="Video/Audio: HTTP.Audio," apprisk="elevated"
Application logging in NGFW policy mode
In NGFW policy mode, if an application, application category, or application group is selected on a security policy, and
traffic logging is set to UTM or All, then application control logs will be generated. In addition, when a signature is set to
the ACCEPT action under a security policy, all corresponding child signatures will be assessed and logged as well.
FortiOS 6.4.2 Administration Guide 842
Fortinet Inc.
Policy and Objects
To verify application logging:
1. Go to Policy & Objects > Security Policy and configure a new policy for YouTube.
2. Set Action to ACCEPT and Log Allowed Traffic to Security Events.
3. Configure the remaining settings as required, then click OK.
4. On a client system, play some YouTube videos.
5. On FortiOS, go to Log & Report > Application Control and view the logs.
There are logs not only for YouTube, but also for YouTube_Video.Play, YouTube_Video.Access, and so on, as
verified from the Application Name column.
Policy views and policy lookup
This topic provides a sample of firewall policy views and firewall policy lookup.
FortiOS 6.4.2 Administration Guide 843
Fortinet Inc.
Policy and Objects
Policy views
In Policy & Objects policy list page, there are two policy views: Interface Pair View and By Sequence view.
Interface Pair View displays the policies in the order that they are checked for matching traffic, grouped by the pairs of
Incoming and Outgoing interfaces. For example, all policies referencing traffic from WAN1 to DMZ are in one section.
The policies referencing traffic from DMZ to WAN1 are in another section. The sections are collapsible so that you only
need to look at the sections you want.
By Sequence displays policies in the order that they are checked for matching traffic without any grouping.
The default display is Interface Pair View. You can switch between the two views except if any or multiple-interfaces are
applied in the policy.
How Any or multiple-interfaces policy can change the Interface Pair View
The FortiGate unit automatically changes the view on the policy list page to By Sequence whenever there is a policy
containing any or multiple-interfaces as the Source or Destination interface. If the Interface Pair View is grayed out, it is
likely that one or more policies have used the any or multiple-interfaces.
When you use the any or multiple-interfaces, the policy goes into multiple sections because it might be any one of a
number of interface pairings. Policies are divided into sectioned using the interface pairings, for example, port1 to port2.
Each section has its own policy order. The order in which a policy is checked for matching criteria to a packet’s
information is based solely on the position of the policy within its section or within the entire list of policies. If the policy is
in multiple sections, FortiGate cannot place the policy in order in multiple sections. Therefore the view can only be By
Sequence.
FortiOS 6.4.2 Administration Guide 844
Fortinet Inc.
Policy and Objects
Policy lookup
Firewall policy lookup is based on the Source_interfaces/Protocol/Source_Address/Destination_
Address that matches the source-port and dst-port of the protocol. Use this tool to find out which policy matches
specific traffic from a number of policies. After completing the lookup, the matching firewall policy is highlighted on the
policy list page.
The Policy Lookup tool has the following requirements:
l Transparent mode does not support Policy lookup function.
l When executing the policy lookup, you need to confirm whether the relevant route required for the policy work
already exists.
Sample configuration
This example uses the TCP protocol to show how policy lookup works:
1. In Policy & Objects policy list page, click Policy Lookup and enter the traffic parameters.
2. Click Search to display the policy lookup results.
Policy with source NAT
The following topics provide instructions on configuring policies with source NAT:
FortiOS 6.4.2 Administration Guide 845
Fortinet Inc.
Policy and Objects
l Static SNAT on page 846
l Dynamic SNAT on page 847
l Central SNAT on page 852
l Configuring an IPv6 SNAT policy on page 855
l SNAT policies with virtual wire pairs on page 857
Static SNAT
Network Address Translation (NAT) is the process that enables a single device such as a router or firewall to act as an
agent between the Internet or Public Network and a local or private network. This agent acts in real time to translate the
source or destination IP address of a client or server on the network interface. For the source IP translation, this enables
a single public address to represent a significantly larger number of private addresses. For the destination IP translation,
the firewall can translate a public destination address to a private address. So we don't have to configure a real public IP
address for the server deployed in a private network.
We can subdivide NAT into two types: source NAT (SNAT) and destination NAT (DNAT). This topic is about SNAT, We
support three NAT working modes: static SNAT, dynamic SNAT, and central SNAT.
In static SNAT all internal IP addresses are always mapped to the same public IP address. This is a port address
translation, Since we have 60416 available port numbers, this one public IP address can handle the conversion of
60,416 internal IP addresses. See example below.
FortiGate firewall configurations commonly use the Outgoing Interface address.
Sample configuration
The following example of static SNAT uses an internal network with subnet 10.1.100.0/24 (vlan20) and an external/ISP
network with subnet 172.16.200.0/24 (vlan30).
When the clients in internal network need to access the servers in external network, We need to translate IP addresses
from 10.1.100.0/24 to an IP address 172.16.200.0/24, In this example, we implement static SNAT by creating a firewall
policy.
To configure static NAT:
1. In Policy & Objects > Firewall Policy, click Create New.
2. Enter the required policy parameters.
3. Enable NAT and select Use Outgoing Interface Address.
4. If needed, enable Preserve Source Port.
Enable Preserve Source Port to keep the same source port for services that expect traffic to come from a specific
source port.
Disable Preserve Source Port to allow more than one connection through the firewall for that service.
FortiOS 6.4.2 Administration Guide 846
Fortinet Inc.
Policy and Objects
For packets that match this policy, its source IP address is translated to the IP address of the outgoing interface.
Dynamic SNAT
Dynamic SNAT maps the private IP addresses to the first available public address from a pool of addresses. In the
FortiGate firewall, this can be done by using IP pools. IP pools is a mechanism that allows sessions leaving the FortiGate
firewall to use NAT. An IP pool defines a single IP address or a range of IP addresses to be used as the source address
for the duration of the session. These assigned addresses are used instead of the IP address assigned to that FortiGate
interface.
IP pool types
FortiGate uses four types of IPv4 IP pools. This topic focuses on some of the differences between them.
Overload
This type of IP pool is similar to static SNAT mode. We need to define an external IP range that contains one or more IP
addresses. When there is only one IP address it is almost the same as static SNAT, the outgoing interface address is
used. When it contains multiple IP addresses, it is equivalent to an extended mode of static SNAT.
For instance, if we define an overload type IP pool with two external IP addresses (172.16.200.1—172.16.200.2), since
there are 60,416 available port numbers per IP, this IP pool can handle 60,416*2 internal IP addresses.
The mapped IP address can be calculated from the source IP address. The index number of the address in the pool is
the remainder of the source IP address, in decimal, divided by the number addresses in the pool.
FortiOS 6.4.2 Administration Guide 847
Fortinet Inc.
Policy and Objects
To calculate the decimal value of the source IP address, either use an online calculator, or use
the following equation:
a.b.c.d = a * (256)3 + b * (256)2 + c * (256) + d
For example:
192.168.0.1 = 192 * (256)3 + 168 * (256)2 + 0 * (256) + 1 = 3232235521
If there is one IP pool, where:
l P1 = the first address in the IP pool
l R1 = the number of IP addresses in the IP pool
l X = the source IP address as a decimal number
l Y = the mapped IP address
Then the equation to determine the mapped address is:
Y = P1 + X mod R1
For example:
IP pool Source IP address
172.26.73.20 to 172.26.73.90 192.168.1.200
1. Convert the source IP address to a decimal number:
192 * (256)3 + 168 * (256)2 + 1 * (256) + 200 = 3232235976
2. Determine the number of IP addresses in the pool:
172.26.73.90 - 172.26.73.20 = 71
3. Find the remainder of the source IP address divided by the number of addresses in the pool:
3232235976 mod 71 = 26
4. Add the remainder to the first IP address in the pool:
172.26.73.20 + 26 = 172.26.73.46
So, the mapped IP address is 172.26.73.46.
If there are multiple IP pools, the calculation is similar to when there is only one pool.
If there are two IP pools, where:
l P1 = the first address in the first IP pool
l P2 = the first address in the second IP pool
l R1 = the number of IP addresses in the first IP pool
l R2 = the number of IP addresses in the second IP pool
l X = the source IP address as a decimal number
l Y = the mapped IP address
Then the equations to determine the mapped address are:
If X mod (R1 + R2) >= R1, then Y = P2 + X mod R2
If X mod (R1 + R2) < R1, then Y = P1 + X mod R1
For example:
FortiOS 6.4.2 Administration Guide 848
Fortinet Inc.
Policy and Objects
IP pools Source IP address
pool01: 172.26.73.20 to 172.26.73.90 192.168.1.200
pool02: 172.26.75.50 to 172.26.75.150
1. Convert the source IP address to a decimal number:
192 * (256)3 + 168 * (256)2 + 1 * (256) + 200 = 3232235976
2. Determine the total number of IP addresses in the pools:
(172.26.73.90 - 172.26.73.20) + (172.26.75.50 - 172.26.75.150) = 71 + 101 = 172
3. Find the remainder of the source IP address divided by the number of addresses in the pools:
3232235976 mod 172 = 108
4. The remainder is greater than the number of addresses in pool01, so the address is selected from pool02 and the
remainder is recalculated based only on pool02:
3232235976 mod 101 = 40
5. Add the new remainder to the first IP address in pool02:
172.26.75.50 + 40 = 172.26.75.90
So, the mapped IP address is 172.26.75.90.
One-to-one
This type of IP pool means that the internal IP address and the external (translated) IP address match one-to-one. The
port address translation (PAT) is disabled when using this type of IP pool. For example, if we define a one-to-one type IP
pool with two external IP addresses (172.16.200.1 - 172.16.200.2), this IP pool only can handle two internal IP
addresses.
Fixed port range
For the overload and one-to-one IP pool types, we do not need to define the internal IP range. For the fixed port range
type of IP pool, we can define both internal IP range and external IP range. Since each external IP address and the
number of available port numbers is a specific number, if the number of internal IP addresses is also determined, we can
calculate the port range for each address translation combination. So we call this type fixed port range. This type of IP
pool is a type of port address translation (PAT).
For instance, if we define one external IP address (172.16.200.1) and ten internal IP addresses (10.1.100.1-
10.1.100.10), we have translation IP+Port combination like following table:
FortiOS 6.4.2 Administration Guide 849
Fortinet Inc.
Policy and Objects
Port block allocation
This type of IP pool is also a type of port address translation (PAT). It gives users a more flexible way to control the way
external IPs and ports are allocated. Users need to define Block Size/Block Per User and external IP range. Block Size
means how many ports each Block contains. Block per User means how many blocks each user (internal IP) can use.
The following is a simple example:
l External IP Range: 172.16.200.1—172.16.200.1
l Block Size: 128
l Block Per User: 8
Result:
l Total-PBAs: 472 (60416/128)
l Maximum ports can be used per User (Internal IP Address): 1024 (128*8)
l How many Internal IP can be handled: 59 (60416/1024 or 472/8)
Sample configuration
To configure overload IP pool in the GUI:
1. In Policy & Objects > IP Pools, click Create New.
2. Select IPv4 Pool and then select Overload.
To configure overload IP pool in the CLI:
config firewall ippool
edit "Overload-ippool"
set startip 172.16.200.1
set endip 172.16.200.1
next
end
FortiOS 6.4.2 Administration Guide 850
Fortinet Inc.
Policy and Objects
To configure one-to-one IP pool using the GUI:
1. In Policy & Objects > IP Pools, click Create New.
2. Select IPv4 Pool and then select One-to-One.
To configure one-to-one IP pool in the CLI:
config firewall ippool
edit "One-to-One-ippool"
set type one-to-one
set startip 172.16.200.1
set endip 172.16.200.2
next
end
To configure fixed port range IP pool in the GUI:
1. In Policy & Objects > IP Pools, click Create New.
2. Select IPv4 Pool and then select Fixed Port Range.
To configure fixed port range IP pool in the CLI:
config firewall ippool
edit "FPR-ippool"
set type fixed-port-range
set startip 172.16.200.1
set endip 172.16.200.1
set source-startip 10.1.100.1
set source-endip 10.1.100.10
next
end
FortiOS 6.4.2 Administration Guide 851
Fortinet Inc.
Policy and Objects
To configure port block allocation IP pool in the GUI:
1. In Policy & Objects > IP Pools, click Create New.
2. Select IPv4 Pool and then select Port Block Allocation.
To configure port block allocation IP pool in the CLI:
config firewall ippool
edit PBA-ippool
set type port-block-allocation
set startip 172.16.200.1
set endip 172.16.200.1
set block-size 128
set num-blocks-per-user 8
next
end
Central SNAT
The central SNAT table enables you to define and control (with more granularity) the address translation performed by
FortiGate. With the NAT table, you can define the rules for the source address or address group, and which IP pool the
destination address uses.
While similar in functionality to IP pools where a single address is translated to an alternate address from a range of IP
addresses, with IP pools there is no control over the translated port. When using the IP pool for source NAT, you can
define a fixed port to ensure the source port number is unchanged. If no fixed port is defined, the port translation is
randomly chosen by FortiGate. With the central NAT table, you have full control over both the IP address and port
translation.
FortiGate reads the NAT rules from the top down until it hits a matching rule for the incoming address. This enables you
to create multiple NAT policies that dictate which IP pool is used based on the source address. NAT policies can be
rearranged within the policy list. NAT policies are applied to network traffic after a security policy.
The central SNAT table allows you to create, edit, delete, and clone central SNAT entries.
Central SNAT notes
l The central NAT feature in not enabled by default.
l If central NAT is enabled, the NAT option under IPv4 policies is skipped and SNAT must be done via central-
snat-map. The firewall policy list and dialog boxes have messages and redirection links to show this information.
l If NGFW mode is policy-based, then it is assumed that central NAT (specifically SNAT) is enabled implicitly.
FortiOS 6.4.2 Administration Guide 852
Fortinet Inc.
Policy and Objects
l The option to toggle NAT in central-snat-map policies has been added. Previously it was only shown in NGFW
policy-based mode.
l In the central SNAT policy dialog box, the port mapping fields for the original port have been updated to accept
ranges.
l If per VDOM NAT is enabled, NAT is skipped in firewall policy.
l The central SNAT window contains a table of all the central SNAT policies.
Sample configuration
To enable or disable central SNAT using the CLI:
config system settings
set central-nat [enable | disable]
end
When central NAT is enabled, Policy & Objects displays the Central SNAT section.
To create central SNAT using the GUI:
1. In Policy & Objects > Central SNAT.
The right pane displays a table of Central SNAT entries.
2. To create a new entry, click Create New in the right pane.
To edit an entry, double-click the policy you want to edit.
3. To set the Incoming Interface, click + in that field.
4. In the pane on the right, select an interface to add it.
You can select multiple interfaces.
5. To set the Outgoing Interface, click click + in that field.
6. In the pane on the right, select an interface to add it.
You can select multiple interfaces.
7. To set the Source Address, click click + in that field.
8. In the pane on the right, select an address to add it.
You can select multiple addresses.
9. To set the Destination Address, click click + in that field.
10. In the pane on the right, select an address to add it.
You can select multiple addresses.
11. In NAT > IP Pool Configuration, select either Use Outgoing Interface Address or Use Dynamic IP Pool.
If you select Use Dynamic IP Pool, click + and select which IP pool to use.
12. Select one of the following Protocol parameters.
l ANY. Use any protocol traffic.
l TCP. Use TCP traffic only. Protocol number is set to 6.
l UDP. Use UDP traffic only. Protocol number is set to 17.
l SCTP. Use SCTP traffic only. Protocol number is set to 132.
l Specify. You can specify the traffic filter protocol by setting the protocol number.
13. If you use the Overload type of IP pool, you can enable Explicit Port Mapping.
a. If you enable Explicit Port Mapping, set the Original Source Port to the start number of the source port range.
b. Set the Translated Port to the start number of the translated port range.
14. Click OK.
FortiOS 6.4.2 Administration Guide 853
Fortinet Inc.
Policy and Objects
To configure central SNAT using the CLI:
config firewall central-snat-map
edit <policyID number>set status [enable|disable]
set orig-addr <valid address object preconfigured on the FortiGate>
set srcintf <name of interface on the FortiGate>
set dst-addr <valid address object preconfigured on the FortiGate>
set dstintf <name of interface on the FortiGate>
set protocol <integer for protocol number>
set orig-port <integer for original port number>
set nat-port <integer for translated port number>
set comments <string>
end
To set NAT to be not available regardless of NGFW mode:
config firewall central-snat-map
edit 1
set orig-addr "192-86-1-86"
set srcintf "port23"
set dst-addr "192-96-1-96"
set dstintf "port22"
set nat-ippool "pool1"
set protocol 17
set orig-port 2896-2897
set nat enable
next
end
To hide NAT port if NAT IP pool is not set or if NAT is disabled:
config firewall central-snat-map
edit 1
set orig-addr "192-86-1-86"
set srcintf "port23"
set dst-addr "192-96-1-96"
set dstintf "port22"
set nat-ippool "pool1"
set protocol 17
set orig-port 2896-2897
set nat disable
next
end
To change original port to accept range:
config firewall central-snat-map
edit 1
set orig-addr "192-86-1-86"
set srcintf "port23"
set dst-addr "192-96-1-96"
set dstintf "port22"
set nat-ippool "pool1"
set protocol 17
set orig-port 2896-2897 (help text changed to: Original port or port range).
FortiOS 6.4.2 Administration Guide 854
Fortinet Inc.
Policy and Objects
set nat-port 35804-35805
next
end
Configuring an IPv6 SNAT policy
IPv4 and IPv6 central SNAT maps are displayed in the same table.
To configure an IPv6 policy with central SNAT in the GUI:
1. Enable central SNAT:
a. In the Global VDOM, go to System > VDOM.
b. Select a VDOM and click Edit. The Edit Virtual Domain Settings pane opens.
c. Enable Central SNAT.
d. Click OK.
2. Go in to the VDOM with central SNAT enabled (FG-traffic in this example).
3. Go Policy & Objects > Central SNAT and click Create New.
4. Configure the policy settings:
a. For Type, select IPv6.
b. Enter the interface, address, and IP pool information.
c. Configure the other settings as needed.
FortiOS 6.4.2 Administration Guide 855
Fortinet Inc.
Policy and Objects
d. Click OK.
The matching SNAT traffic will be handled by the IPv6 central SNAT map.
To configure an IPv6 policy with central SNAT in the CLI:
1. Enable central SNAT:
config vdom
edit FG-traffic
config system settings
set central-nat enable
end
next
end
2. Create an IPv6 central SNAT policy:
config vdom
edit FG-traffic
config firewall central-snat-map
edit 2
set type ipv6
set srcintf "wan2"
set dstintf "wan1"
set orig-addr6 "all"
set dst-addr6 "all"
set nat-ippool6 "test-ippool6-1"
next
end
next
end
3. Verify the SNAT traffic:
(FG-traffic) # diagnose sniffer packet any icmp6 4
interfaces=[any]
filters=[icmp6]
FortiOS 6.4.2 Administration Guide 856
Fortinet Inc.
Policy and Objects
3.602891 wan2 in 2000:10:1:100::41 -> 2000:172:16:200::55: icmp6: echo request seq 0
3.602942 wan1 out 2000:172:16:200::199 -> 2000:172:16:200::55: icmp6: echo request seq 0
3.603236 wan1 in 2000:172:16:200::55 -> 2000:172:16:200::199: icmp6: echo reply seq 0
3.603249 wan2 out 2000:172:16:200::55 -> 2000:10:1:100::41: icmp6: echo reply seq 0
4.602559 wan2 in 2000:10:1:100::41 -> 2000:172:16:200::55: icmp6: echo request seq 1
4.602575 wan1 out 2000:172:16:200::199 -> 2000:172:16:200::55: icmp6: echo request seq 1
4.602956 wan1 in 2000:172:16:200::55 -> 2000:172:16:200::199: icmp6: echo reply seq 1
4.602964 wan2 out 2000:172:16:200::55 -> 2000:10:1:100::41: icmp6: echo reply seq 1
^C
8 packets received by filter
0 packets dropped by kernel
SNAT policies with virtual wire pairs
Source NAT (SNAT) can be configured in IPv4 and IPv6 policies with virtual wire pair (VWP) interfaces, and between
VWP interfaces when central NAT is enabled.
To configure a policy using SNAT and a VWP interface when central NAT is disabled:
1. Create the VWP interface:
config system virtual-wire-pair
edit "test-vw-1"
set member "port1" "port4"
next
end
2. Create the IP pool. The IP pool must have a different subnet than the VWP peers.
config firewall ippool
edit "vwp-pool-1"
set startip 172.16.222.99
set endip 172.16.222.100
next
end
3. Configure the firewall policy:
config firewall policy
edit 88
set srcintf "port4"
set dstintf "port1"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set logtraffic all
set nat enable
set ippool enable
set poolname "vwp-pool-1"
next
end
FortiOS 6.4.2 Administration Guide 857
Fortinet Inc.
Policy and Objects
4. Verify the IP pool functions as expected and traffic passes through:
# diagnose sniffer packet any icmp 4
interfaces=[any]
filters=[icmp]
23.438095 port4 in 172.16.200.11 -> 172.16.200.156: icmp: echo request
23.438126 port1 out 172.16.222.100 -> 172.16.200.156: icmp: echo request
23.438492 port1 in 172.16.200.156 -> 172.16.222.100: icmp: echo reply
23.438501 port4 out 172.16.200.156 -> 172.16.200.11: icmp: echo reply
24.439305 port4 in 172.16.200.11 -> 172.16.200.156: icmp: echo request
24.439319 port1 out 172.16.222.100 -> 172.16.200.156: icmp: echo request
24.439684 port1 in 172.16.200.156 -> 172.16.222.100: icmp: echo reply
24.439692 port4 out 172.16.200.156 -> 172.16.200.11: icmp: echo reply
8 packets received by filter
0 packets dropped by kernel
To configure a SNAT between VWP interfaces when central NAT is enabled:
1. Enable central NAT:
config system settings
set central-nat enable
end
2. Create the VWP interface:
config system virtual-wire-pair
edit "test-vw-1"
set member "port1" "port4"
next
end
3. Create the IP pool. The IP pool must have a different subnet than the VWP peers.
config firewall ippool
edit "vwp-pool-1"
set startip 172.16.222.99
set endip 172.16.222.100
next
end
4. Configure the SNAT policy:
config firewall central-snat-map
edit 2
set srcintf "port4"
set dstintf "port1"
set orig-addr "all"
set dst-addr "all"
set nat-ippool "vwp-pool-1"
next
end
5. Configure the firewall policy:
config firewall policy
edit 90
set srcintf "port4"
set dstintf "port1"
FortiOS 6.4.2 Administration Guide 858
Fortinet Inc.
Policy and Objects
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set logtraffic all
next
end
Policy with destination NAT
The following topics provide instructions on configuring policies with destination NAT:
l Static virtual IPs on page 859
l Virtual IP with services on page 860
l Virtual IPs with port forwarding on page 862
l Virtual server on page 864
Static virtual IPs
Mapping a specific IP address to another specific IP address is usually called Destination NAT (DNAT). When this
central NAT table is not used, FortiOS calls this a Virtual IP address (VIP). DNAT, or VIP, is are used to map an external
IP address to an IP address or address range. The mapping can include all TCP/UDP ports or, if port forwarding is
enabled, it only refers to the specific configured ports. As the central NAT table is disabled by default, the term VIP is
usually used.
VIPs are typically used to NAT external or public IP addresses to internal or private IP addresses. Using a VIP between
two internal interfaces made up of private IP addresses is possible, but rare, because the two networks can just use the
IP addresses of the networks without any address translation. Using a VIP for traffic going from the inside to the internet
is supported, but unlikely to be required.
Sample configuration
To create a virtual IP using the GUI:
1. In Policy & Objects > Virtual IPs.
2. Click Create New and select Virtual IP.
3. Select a VIP Type based on the IP versions used:
l If IPv4 is on both sides of the FortiGate unit, select IPv4.
l If IPv6 is on both sides of the FortiGate unit, select IPv6.
l If traffic goes from an IPv4 network to an IPv6 network, select NAT46.
l If traffic goes from an IPv6 network to an IPv4 network, select NAT64.
FortiOS 6.4.2 Administration Guide 859
Fortinet Inc.
Policy and Objects
4. Enter a unique name for the virtual IP and fill in the other fields.
To create a virtual IP using the CLI:
config firewall vip
edit "Internal_WebServer"
set extip 10.1.100.199
set extintf "any"
set mappedip "172.16.200.55"
next
end
To apply a virtual IP to policy using the CLI:
config firewall policy
edit 8
set name "Example_Virtual_IP_in_Policy"
set srcintf "wan2"
set dstintf "wan1"
set srcaddr "all"
set dstaddr "Internal_WebServer"
set action accept
set schedule "always"
set service "ALL"
set nat enable
next
end
Virtual IP with services
Virtual IP with services is a more flexible virtual IP mode. This mode allows users to define services to a single port
number mapping.
This topic shows how to use virtual IP with services enabled. This example has one public external IP address. We map
TCP ports 8080, 8081, and 8082 to an internal WebServer TCP port 80. This allows remote connections to communicate
with a server behind the firewall.
FortiOS 6.4.2 Administration Guide 860
Fortinet Inc.
Policy and Objects
Sample configuration
To create a virtual IP with services using the GUI:
1. In Policy & Objects > Virtual IPs.
2. Click Create New and select Virtual IP.
3. For VIP Type, select IPv4.
4. Enter a unique name for the virtual IP and fill in the other fields.
5. Configure the fields in the Network section. For example:
l Set Interface to any.
l Set External IP Address/Range to 10.1.100.199.
l Set Mapped IP Address/Range to 172.16.200.55.
6. Enable Optional Filters and then enable Services.
7. In the Services field, click + to display the Services pane.
8. In the Services pane, select TCP_8080, TCP_8081, and TCP_8082.
9. Enable Port Forwarding.
10. Set Map to Port to 80.
11. Click OK.
To see the results:
1. Apply the above virtual IP to the Firewall policy.
2. The results are:
l Access 10.1.100.199:8080 from external network and FortiGate maps to 172.16.200.55:80 in internal network.
l Access 10.1.100.199:8081 from external network and FortiGate maps to 172.16.200.55:80 in internal network.
l Access 10.1.100.199:8082 from external network and FortiGate maps to 172.16.200.55:80 in internal network.
FortiOS 6.4.2 Administration Guide 861
Fortinet Inc.
Policy and Objects
To create a virtual IP with services using the CLI:
config firewall vip
edit "WebServer_VIP_Services"
set service "TCP_8080" "TCP_8081" "TCP_8082"
set extip 10.1.100.199
set extintf "any"
set portforward enable
set mappedip "172.16.200.55"
set mappedport 80
next
end
Virtual IPs with port forwarding
If you need to hide the internal server port number or need to map several internal servers to the same public IP address,
enable port-forwarding for Virtual IP.
This topic shows how to use virtual IPs to configure port forwarding on a FortiGate unit. This example has one public
external IP address. We map TCP ports 8080, 8081, and 8082 to different internal WebServers' TCP port 80. This allows
remote connections to communicate with a server behind the firewall.
Sample configuration
To create a virtual IP with port forwarding using the GUI:
1. In Policy & Objects > Virtual IPs.
2. Click Create New and select Virtual IP.
3. For VIP Type, select IPv4.
4. Enter a unique name for the virtual IP and fill in the other fields.
5. Configure the fields in the Network section. For example:
l Set Interface to any.
l Set External IP Address/Range to 10.1.100.199.
l Set Mapped IP Address/Range to 172.16.200.55.
6. Leave Optional Filters disabled.
7. Enable Port Forwarding.
8. Configure the fields in the Port Forwarding section. For example:
l Set Protocol to TCP.
l Set External Service Port to 8080 - 8080.
l Set Map to Port to 80 - 80.
FortiOS 6.4.2 Administration Guide 862
Fortinet Inc.
Policy and Objects
9. Click OK.
10. Follow the above steps to create two additional virtual IPs.
a. For one virtual IP:
l Use a different Mapped IP Address/Range, for example, 172.16.200.56.
l Set External Service Port to 8081 - 8081.
l Use the same Map to Port numbers: 80 - 80.
b. For the other virtual IP:
l Use a different Mapped IP Address/Range, for example, 172.16.200.57.
l Set External Service Port to 8082 - 8082.
l Use the same Map to Port numbers: 80 - 80.
11. Create a Virtual IP Group and put the above three virtual IPs into that group.
To see the results:
1. Apply the above virtual IP to the Firewall policy.
2. The results are:
l Access 10.1.100.199:8080 from external network and FortiGate maps to 172.16.200.55:80 in internal network.
l Access 10.1.100.199:8081 from external network and FortiGate maps to 172.16.200.56:80 in internal network.
l Access 10.1.100.199:8082 from external network and FortiGate maps to 172.16.200.57:80 in internal network
FortiOS 6.4.2 Administration Guide 863
Fortinet Inc.
Policy and Objects
Virtual server
This topic shows a special virtual IP type: virtual server. Use this type of VIP to implement server load balancing.
The FortiOS server load balancing contains all the features of a server load balancing solution. You can balance traffic
across multiple backend servers based on multiple load balancing schedules including:
l Static (failover)
l Round robin
l Weighted (to account for different sized servers or based on the health and performance of the server including
round trip time and number of connections)
The load balancer supports HTTP, HTTPS, IMAPS, POP3S, SMTPS, SSL/TLS, and generic TCP/UDP and IP protocols.
Session persistence is supported based on the SSL session ID based on an injected HTTP cookie, or based on the
HTTP or HTTPS host. SSL/TLS load balancing includes protection from protocol downgrade attacks. Server load
balancing is supported on most FortiGate devices and includes up to 10,000 virtual servers on high end systems.
Sample topology
SSL/TLS offloading
FortiGate SSL/TLS offloading is designed for the proliferation of SSL/TLS applications. The key exchange and
encryption/decryption tasks are offloaded to the FortiGate unit where they are accelerated using FortiASIC technology
which provides significantly more performance than a standard server or load balancer. This frees up valuable resources
on the server farm to give better response to business operations. Server load balancing offloads most SSL/TLS
versions including SSL 3.0, TLS 1.0, and TLS 1.2, and supports full mode or half mode SSL offloading with DH key sizes
up to 4096 bits.
FortiGate SSL offloading allows the application payload to be inspected before it reaches your servers. This prevents
intrusion attempts, blocks viruses, stops unwanted applications, and prevents data leakage. SSL/TLS content inspection
supports TLS versions 1.0, 1.1, and 1.2 and SSL versions 1.0, 1.1, 1.2, and 3.0.
Virtual server requirements
When creating a new virtual server, you must configure the following options:
l Virtual Server Type.
l Load Balancing Methods.
FortiOS 6.4.2 Administration Guide 864
Fortinet Inc.
Policy and Objects
l Health check monitoring (optional).
l Session persistence (optional).
l Virtual Server IP (External IP Address).
l Virtual Server Port (External Port).
l Real Servers (Mapped IP Address & Port).
Virtual server types
Select the protocol to be load balanced by the virtual server. If you select a general protocol such as IP, TCP, or UDP,
the virtual server load balances all IP, TCP, or UDP sessions. If you select specific protocols such as HTTP, HTTPS, or
SSL, you can apply additional server load balancing features such as Persistence and HTTP Multiplexing.
HTTP Select HTTP to load balance only HTTP sessions with the destination port number that matches the
Virtual Server Port setting. Change Virtual Server Port to match the destination port of the sessions
to be load balanced (usually port 80 for HTTP sessions). You can enable HTTP Multiplexing. You
can also set Persistence to HTTP Cookie to enable cookie-based persistence.
HTTPS Select HTTPS to load balance only HTTPS sessions with the destination port number that matches
the Virtual Server Port setting. Change Virtual Server Port to match the destination port of the
sessions to be load balanced (usually port 443 for HTTPS sessions). You can enable HTTP
Multiplexing. You can also set Persistence to HTTP Cookie to enable cookie-based persistence, or
you can set Persistence to SSL Session ID.
IMAPS Select IMAPS to load balance only IMAPS sessions with the destination port number that matches
the Virtual Server Port setting. Change Virtual Server Port to match the destination port of the
sessions to be load balanced (usually port 993 for IMAPS sessions). You can also set Persistence
to SSL Session ID.
POP3S Select POP3S to load balance only POP3S sessions with the destination port number that matches
the Virtual Server Port setting. Change Virtual Server Port to match the destination port of the
sessions to be load balanced (usually port 995 for POP3S sessions). You can also set Persistence
to SSL Session ID.
SMTPS Select SMTPS to load balance only SMTPS sessions with the destination port number that matches
the Virtual Server Port setting. Change Virtual Server Port to match the destination port of the
sessions to be load balanced (usually port 465 for SMTPS sessions). You can also set Persistence
to SSL Session ID.
SSL Select SSL to load balance only SSL sessions with the destination port number that matches the
Virtual Server Port setting. Change Virtual Server Port to match the destination port of the sessions
to be load balanced. You can also set Persistence to SSL Session ID.
TCP Select TCP to load balance only TCP sessions with the destination port number that matches the
Virtual Server Port setting. Change Virtual Server Port to match the destination port of the sessions
to be load balanced.
UDP Select UDP to load balance only UDP sessions with the destination port number that matches the
Virtual Server Port setting. Change Virtual Server Port to match the destination port of the sessions
to be load balanced.
IP Select IP to load balance all sessions accepted by the security policy that contains this virtual
server.
FortiOS 6.4.2 Administration Guide 865
Fortinet Inc.
Policy and Objects
Load balancing methods
The load balancing method defines how sessions are load balanced to real servers.
All load balancing methods do not send traffic to real servers that are down or not responding. FortiGate can only
determine if a real server is not responding by using a health check monitor. You should always add at least one health
check monitor to a virtual server or to real servers; otherwise load balancing might try to distribute sessions to real
servers that are not functioning.
Static The traffic load is statically spread evenly across all real servers. Sessions are not assigned
according to how busy individual real servers are. This load balancing method provides some
persistence because all sessions from the same source address always go to the same real server.
Because the distribution is stateless, so if a real server is added, removed, or goes up or down, the
distribution is changed and persistence might be lost.
Round Robin Directs new requests to the next real server. This method treats all real servers as equals
regardless of response time or the number of connections. This method does not direct requests to
real servers that down or non responsive.
Weighted Real servers with a higher weight value receive a larger percentage of connections. Set the real
server weight when adding a real server.
Least Session Directs requests to the real server that has the least number of current connections. This method
works best in environments where the real servers or other equipment you are load balancing all
have similar capabilities. This load balancing method uses the FortiGate session table to track the
number of sessions being processed by each real server. The FortiGate unit cannot detect the
number of sessions actually being processed by a real server.
Least RTT Directs sessions to the real server with the lowest round trip time. The round trip time is determined
by a ping health check monitor. The default is 0 if no ping health check monitors are added to the
virtual server.
First Alive Directs sessions to the first live real server. This load balancing schedule provides real server
failover protection by sending all sessions to the first live real server. If a real server fails, all
sessions are sent to the next live real server. Sessions are not distributed to all real servers so all
sessions are processed by the first real server only.
HTTP Host Load balances HTTP host connections across multiple real servers using the host’s HTTP header
to guide the connection to the correct real server.
Health check monitoring
In the FortiGate GUI, you can configure health check monitoring so that the FortiGate unit can verify that real servers are
able respond to network connection attempts. If a real server responds to connection attempts, the load balancer
continues to send sessions to it. If a real server stops responding to connection attempts, the load balancer assumes
that the server is down and does not send sessions to it. The health check monitor configuration determines how the
load balancer tests real servers. You can use a single health check monitor for multiple load balancing configurations.
You can configure TCP, HTTP, and Ping health check monitors. You usually set the health check monitor to use the
same protocol as the traffic being load balanced to it. For example, for an HTTP load balancing configuration, you would
normally use an HTTP health check monitor.
FortiOS 6.4.2 Administration Guide 866
Fortinet Inc.
Policy and Objects
Session persistence
Use persistence to ensure a user is connected to the same real server every time the user makes an HTTP, HTTPS, or
SSL request that is part of the same user session. For example, if you are load balancing HTTP and HTTPS sessions to
a collection of eCommerce web servers, when users make a purchase, they will be starting multiple sessions as they
navigate the eCommerce site. In most cases, all the sessions started by this user during one eCommerce session
should be processed by the same real server. Typically, the HTTP protocol keeps track of these related sessions using
cookies. HTTP cookie persistence ensure all sessions that are part of the same user session are processed by the same
real server.
When you configure persistence, the FortiGate unit load balances a new session to a real server according to the load
balance method. If the session has an HTTP cookie or an SSL session ID, the FortiGate unit sends all subsequent
sessions with the same HTTP cookie or SSL session ID to the same real server.
Real servers
Add real servers to a load balancing virtual server to provide information the virtual server requires to send sessions to
the server. A real server configuration includes the IP address of the real server and port number the real server receives
sessions on. The FortiGate unit sends sessions to the real server’s IP address using the destination port number in the
real server configuration.
When configuring a real server, you can also specify the weight (if the load balance method is set to Weighted) and you
can limit the maximum number of open connections between the FortiGate unit and the real server. If the maximum
number of connections is reached for the real server, the FortiGate unit automatically switches all further connection
requests to other real servers until the connection number drops below the limit. Setting Maximum Connections to 0
means that the FortiGate unit does not limit the number of connections to the real server.
Sample of HTTP load balancing to three real web servers
This example describes the steps to configure the load balancing configuration below. In this configuration, a FortiGate
unit is load balancing HTTP traffic from the Internet to three HTTP servers on the internal network. HTTP sessions are
accepted at the wan1 interface with destination IP address 172.20.120.121 on TCP port 8080, and forwarded from the
internal interface to the web servers. When forwarded, the destination address of the session is translated to the IP
address of one of the web servers.
This load balancing configuration also includes session persistence using HTTP cookies, round-robin load balancing,
and TCP health monitoring for the real servers. Ping health monitoring consists of the FortiGate unit using ICMP ping to
ensure the web servers can respond to network traffic.
FortiOS 6.4.2 Administration Guide 867
Fortinet Inc.
Policy and Objects
General steps:
1. Create a health check monitor.
A ping health check monitor causes the FortiGate to ping the real servers every 10 seconds. If one of the servers
does not respond within 2 seconds, the FortiGate unit will retry the ping 3 times before assuming that the HTTP
server is not responding.
2. Create a load balance virtual server with three real servers.
3. Add the load balancing virtual server to a policy as the destination address.
To see the virtual servers and health check monitors options in the GUI, Load Balance must be
selected in Feature Visibility > Additional Features. See Feature visibility on page 821 on page
1 for details.
Configure a load balancing virtual server in the GUI
To create a health check monitor:
1. Go to Policy & Objects > Health Check.
2. Click Create New.
3. Set the following:
l Name to Ping-mon-1
l Type to Ping
l Interval to 10 seconds
l Timeout to 2 seconds
l Retry to 3 attempt(s)
FortiOS 6.4.2 Administration Guide 868
Fortinet Inc.
Policy and Objects
4. Click OK.
To create a virtual server:
1. Go to Policy & Objects > Virtual Servers.
2. Click Create New.
3. Set the following:
l Name to Vserver-HTTP-1
l Type to HTTP
l Interface to wan1
l Virtual Server IP to 172.20.120.121
l Virtual Server Port to 8080
l Load Balance Method to Round Robin
l Persistence to HTTP Cookie
l Health Check to Ping-mon-1
4. In the Real Servers table, click Create New.
5. Set the following for the first real server:
l Type to IP
l IP Address to 10.31.101.30
l Port to 80
l Max Connections to 0
l Mode to Active
FortiOS 6.4.2 Administration Guide 869
Fortinet Inc.
Policy and Objects
6. Configure two more real servers with IP addresses 10.31.101.40 and 10.31.101.50, and the remaining settings the
same as the first real server.
7. Click OK.
To create a security policy that includes the load balance virtual server as the destination address:
1. Go to Policy & Objects > Firewall Policy.
2. Click Create New.
3. Set the Inspection Mode to Proxy-based. The new virtual server will not be available if the inspection mode is Flow-
based.
4. Set the following:
l Name to LB-policy
l Incoming Interface to wan1
l Outgoing Interface to internal
l Source to all
l Destination to Vserver-HTTP-1
l Schedule to always
l Service to ALL
l Action to ACCEPT
5. Enable NAT and set IP Pool Configuration to Use Outgoing Interface Address.
6. Enable AntiVirus and select an antivirus profile.
7. Click OK.
FortiOS 6.4.2 Administration Guide 870
Fortinet Inc.
Policy and Objects
Configure a load balancing virtual server in the CLI
To configure HTTP load balancing to three real web servers in the CLI:
1. Create a health check monitor:
config firewall ldb-monitor
edit "Ping-mon-1"
set type ping
set interval 10
set timeout 2
set retry 3
next
end
2. Create a virtual server:
config firewall vip
edit "Vserver-HTTP-1"
set type server-load-balance
set extip 172.20.120.121
set extintf "any"
set server-type http
set monitor "Ping-mon-1"
set ldb-method round-robin
set persistence http-cookie
set extport 8080
config realservers
edit 1
set type ip
set ip 10.31.101.30
set port 80
next
edit 2
set type ip
set ip 10.31.101.40
set port 80
next
edit 3
set type ip
set ip 10.31.101.50
set port 80
next
end
next
end
3. Add the load balancing virtual server to a policy as the destination address:
config firewall policy
edit 2
set name "LB-policy"
set inspection-mode proxy
set srcintf "wan1"
set dstintf "internal"
set srcaddr "all"
set dstaddr "Vserver-HTTP-1"
set action accept
FortiOS 6.4.2 Administration Guide 871
Fortinet Inc.
Policy and Objects
set schedule "always"
set service "ALL"
set utm-status enable
set ssl-ssh-profile "certificate-inspection"
set av-profile "default"
set fsso disable
set nat enable
next
end
Results
Traffic accessing 172.20.120.121:8080 is forwarded in turn to the three real servers.
If the access request has an http-cookie, FortiGate forwards the access to the corresponding real server according to the
cookie.
Policy with Internet Service
The following topics provide instructions on configuring policies with Internet Service:
l Using Internet Service in policy on page 872
l Using custom Internet Service in policy on page 874
l Using extension Internet Service in policy on page 876
l Global IP address information database on page 879
l IP reputation filtering on page 881
l Internet service groups in policies on page 882
l Allow creation of ISDB objects with regional information on page 886
l Internet service customization on page 888
Using Internet Service in policy
This topic shows how to apply a predefined Internet Service entry into a policy.
The Internet Service Database is a comprehensive public IP address database that combines IP address range, IP
owner, service port number, and IP security credibility. The data comes from the FortiGuard service system. Information
is regularly added to this database, for example, geographic location, IP reputation, popularity & DNS, and so on. All this
information helps users define Internet security more effectively. You can use the contents of the database as criteria for
inclusion or exclusion in a policy.
From FortiOS version 5.6, Internet Service is included in the firewall policy. It can be applied to a policy only as a
destination object. From version 6.0, Internet Service can be applied both as source and destination objects in a policy.
You can also apply Internet Services to shaping policy.
There are three types of Internet Services you can apply to a firewall policy:
l Predefined Internet Services
l Custom Internet Services
l Extension Internet Services
FortiOS 6.4.2 Administration Guide 872
Fortinet Inc.
Policy and Objects
Sample configuration
To apply a predefined Internet Service entry to a policy using the GUI:
1. Go to Policy & Objects and create a new policy.
2. In the Source or Destination field, click +.
3. In the Select Entries pane, click Internet Service.
4. Locate and click Google.Gmail.
5. Configure the other fields and then click OK.
To apply a predefined Internet Service entry to a policy using the CLI:
In the CLI, enable the internet-service first and then use its ID to apply the policy.
This example uses Google Gmail and its ID is 65646. Each Internet Service has a unique ID.
config firewall policy
edit 9
set name "Internet Service in Policy"
set srcintf "wan2"
set dstintf "wan1"
set srcaddr "all"
set internet-service enable
set internet-service-id 65646
set action accept
set schedule "always"
set utm-status enable
FortiOS 6.4.2 Administration Guide 873
Fortinet Inc.
Policy and Objects
set av-profile "g-default"
set ssl-ssh-profile "certificate-inspection"
set nat enable
next
end
To diagnose an Internet Service entry using the CLI:
# diagnose internet-service id-summary 65646
Version: 0000600096
Timestamp: 201902111802
Total number of IP ranges: 444727
Number of Groups: 7
Group(0), Singularity(20), Number of IP ranges(142740)
Group(1), Singularity(19), Number of IP ranges(1210)
Group(2), Singularity(16), Number of IP ranges(241)
Group(3), Singularity(15), Number of IP ranges(38723)
Group(4), Singularity(10), Number of IP ranges(142586)
Group(5), Singularity(8), Number of IP ranges(5336)
Group(6), Singularity(6), Number of IP ranges(113891)
Internet Service: 65646(Google.Gmail)
Number of IP range: 60
Number of IP numbers: 322845
Singularity: 15
Reputation: 5(Known and verified safe sites such as Gmail, Amazon, eBay, etc.)
Icon Id: 510
Second Level Domain: 53(gmail.com)
Direction: dst
Data source: isdb
Result
Because the IP and services related to Google Gmail on the Internet are included in this Internet Service (65646), all
traffic to Google Gmail is forwarded by this policy.
Using custom Internet Service in policy
Custom Internet Services can be created and used in firewall policies.
When creating a custom Internet Service, you must set following elements:
l IP or IP ranges
l Protocol number
l Port or port ranges
l Reputation
You must use CLI to create a custom Internet Service, except for geographic based services (see Allow creation of ISDB
objects with regional information on page 886).
CLI syntax
config firewall internet-service-custom
edit <name>
set comment <comment>
FortiOS 6.4.2 Administration Guide 874
Fortinet Inc.
Policy and Objects
set reputation {1 | 2 | 3 | 4 | 5}
config entry
edit <ID>
set protocol <protocol #>
set dst <object_name>
config port-range
edit <ID>
set start-port <port #>
set end-port <port #>
next
end
next
end
end
end
Sample configuration
To configure a custom Internet Service:
config firewall internet-service-custom
edit "test-isdb-1"
set comment "Test Custom Internet Service"
set reputation 4
config entry
edit 1
set protocol 6
config port-range
edit 1
set start-port 80
set end-port 443
next
end
set dst "10-1-100-0"
next
edit 2
set protocol 6
config port-range
edit 1
set start-port 80
set end-port 80
next
end
set dst "172-16-200-0"
next
end
next
end
To apply a custom Internet Service into a policy:
config firewall policy
edit 1
set name "Internet Service in Policy"
set srcintf "wan2"
FortiOS 6.4.2 Administration Guide 875
Fortinet Inc.
Policy and Objects
set dstintf "wan1"
set srcaddr "all"
set internet-service enable
set internet-service-id 65646
set internet-service-custom "test-isdb-1"
set action accept
set schedule "always"
set utm-status enable
set av-profile "g-default"
set ssl-ssh-profile "certificate-inspection"
set nat enable
next
end
Result
In addition to the IP address, IP address ranges, and services allowed by Google.Gmail, this policy also allows the traffic
which access to 10.1.100.0/24 and TCP/80-443 and 172.16.200.0/24 and TCP/80.
Using extension Internet Service in policy
Extension Internet Service lets you add custom or remove existing IP address and port ranges to an existing predefined
Internet Service entries. Using an extension type Internet Service is actually editing a predefined type Internet Service
entry and adding IP address and port ranges to it.
When creating an extension Internet Service and adding custom ranges, you must set following elements:
l IP or IP ranges
l Protocol number
l Port or port ranges
You must use CLI to add custom IP address and port entries into a predefined Internet Service.
You must use GUI to remove entries from a predefined Internet Service.
Custom extension Internet Service CLI syntax
config firewall internet-service-extension
edit <ID #>
set comment <comment>
config entry
edit <ID #>
set protocol <number #>
set dst <object_name>
config port-range
edit <ID #>
set start-port <number #>
set end-port <number #>
next
end
next
end
end
end
FortiOS 6.4.2 Administration Guide 876
Fortinet Inc.
Policy and Objects
Sample configuration
To configure an extension Internet Service using the CLI:
config firewall internet-service-extension
edit 65646
set comment "Test Extension Internet Service 65646"
config entry
edit 1
set protocol 6
config port-range
edit 1
set start-port 80
set end-port 443
next
end
set dst "172-16-200-0"
next
edit 2
set protocol 17
config port-range
edit 1
set start-port 53
set end-port 53
next
end
set dst "10-1-100-0"
next
end
next
end
To remove IP address and port entries from an existing Internet Service:
1. Go to Policy & Objects > Internet Service Database.
2. Search for Google.Gmail.
3. Select Google.Gmail and click Edit.
4. Locate the IP entry you want to remove and click Disable beside that entry.
5. Click Return.
6. When you complete the actions in the GUI, the CLI automatically generates the configuration from your GUI actions:
config firewall internet-service-extension
edit 65646
FortiOS 6.4.2 Administration Guide 877
Fortinet Inc.
Policy and Objects
set comment "Test Extension Internet Service 65646"
config entry
edit 1
set protocol 6
config port-range
edit 1
set start-port 80
set end-port 443
next
end
set dst "172-16-200-0"
next
edit 2
set protocol 17
config port-range
edit 1
set start-port 53
set end-port 53
next
end
set dst "10-1-100-0"
next
end
config disable-entry
edit 1
set protocol 6
config port-range
edit 1
set start-port 25
set end-port 25
next
edit 2
set start-port 80
set end-port 80
next
edit 3
set start-port 110
set end-port 110
next
edit 4
set start-port 143
set end-port 143
next
edit 5
set start-port 443
set end-port 443
next
edit 6
set start-port 465
set end-port 465
next
edit 7
set start-port 587
set end-port 587
next
edit 8
FortiOS 6.4.2 Administration Guide 878
Fortinet Inc.
Policy and Objects
set start-port 993
set end-port 993
next
edit 9
set start-port 995
set end-port 995
next
edit 10
set start-port 2525
set end-port 2525
next
end
config ip-range
edit 1
set start-ip 2.20.183.160
set end-ip 2.20.183.160
next
end
next
end
next
end
To apply an extension Internet Service into policy using the CLI:
config firewall policy
edit 9
set name "Internet Service in Policy"
set srcintf "wan2"
set dstintf "wan1"
set srcaddr "all"
set internet-service enable
set internet-service-id 65646
set action accept
set schedule "always"
set utm-status enable
set av-profile "g-default"
set ssl-ssh-profile "certificate-inspection"
set nat enable
next
end
Result
In addition to the IP addresses, IP address ranges, and services allowed by Google.Gmail, this policy also allows the
traffic which accesses 10.1.100.0/24 and UDP/53 and 172.16.200.0/24 and TCP/80-443. At the same time, the traffic
that accesses 2.20.183.160 is dropped because this IP address and port is disabled from Google.Gmail.
Global IP address information database
The Internet Service and IP Reputation databases download details about public IP address, including: ownership,
known services, geographic location, blocklisting information, and more. The details are available in drilldown
information, tooltips, and other mechanisms in the FortiView and other pages.
FortiOS 6.4.2 Administration Guide 879
Fortinet Inc.
Policy and Objects
The global IP address database is an integrated database containing all public IP addresses, and is implemented in the
Internet Service Database.
To view the owner of the IP address:
(global) # get firewall internet-service-owner ?
id Internet Service owner ID.
1 Google
2 Facebook
3 Apple
4 Yahoo
5 Microsoft
......
115 Cybozu
116 VNC
To check for any known service running on an IP address:
(global) # diagnose internet-service info FG-traffic 6 80 8.8.8.8
Internet Service: 65537(Google.Web)
To check GeoIP location and blocklist information:
(global) # diagnose internet-service id 65537 | grep 8.8.8.8
To check a known malicious server:
(global) # diagnose internet-service id-summary 3080383
Version: 0000600096
Timestamp: 201902111802
Total number of IP ranges: 444727
Number of Groups: 7
Group(0), Singularity(20), Number of IP ranges(142740)
Group(1), Singularity(19), Number of IP ranges(1210)
Group(2), Singularity(16), Number of IP ranges(241)
Group(3), Singularity(15), Number of IP ranges(38723)
Group(4), Singularity(10), Number of IP ranges(142586)
Group(5), Singularity(8), Number of IP ranges(5336)
Group(6), Singularity(6), Number of IP ranges(113891)
Internet Service: 3080383(Botnet.C&C.Server)
Number of IP range: 111486
Number of IP numbers: 111486
Singularity: 20
Reputation: 1(Known malicious sites related to botnet servers, phishing sites, etc.)
Icon Id: 591
Second Level Domain: 1(other)
Direction: dst
Data source: irdb
To check questionable usage:
(global) # diagnose internet-service id-summary 2818238
Version: 0000600096
Timestamp: 201902111802
Total number of IP ranges: 444727
FortiOS 6.4.2 Administration Guide 880
Fortinet Inc.
Policy and Objects
Number of Groups: 7
Group(0), Singularity(20), Number of IP ranges(142740)
Group(1), Singularity(19), Number of IP ranges(1210)
Group(2), Singularity(16), Number of IP ranges(241)
Group(3), Singularity(15), Number of IP ranges(38723)
Group(4), Singularity(10), Number of IP ranges(142586)
Group(5), Singularity(8), Number of IP ranges(5336)
Group(6), Singularity(6), Number of IP ranges(113891)
Internet Service: 2818238(Tor.Relay.Node)
Number of IP range: 13718
Number of IP numbers: 13718
Singularity: 20
Reputation: 2(Sites providing high risk services such as TOR, proxy, P2P, etc.)
Icon Id: 43
Second Level Domain: 1(other)
Direction: dst
Data source: irdb
(global) # diagnose internet-service id-summary 2818243
Version: 0000600096
Timestamp: 201902111802
Total number of IP ranges: 444727
Number of Groups: 7
Group(0), Singularity(20), Number of IP ranges(142740)
Group(1), Singularity(19), Number of IP ranges(1210)
Group(2), Singularity(16), Number of IP ranges(241)
Group(3), Singularity(15), Number of IP ranges(38723)
Group(4), Singularity(10), Number of IP ranges(142586)
Group(5), Singularity(8), Number of IP ranges(5336)
Group(6), Singularity(6), Number of IP ranges(113891)
Internet Service: 2818243(Tor.Exit.Node)
Number of IP range: 1210
Number of IP numbers: 1210
Singularity: 19
Reputation: 2(Sites providing high risk services such as TOR, proxy, P2P, etc.)
Icon Id: 43
Second Level Domain: 1(other)
Direction: src
Data source: irdb
IP reputation filtering
There are currently five reputation levels in the Internet Service Database (ISDB), and custom reputation levels can be
defined in a custom internet service. You can configure firewall policies to filter traffic according to the desired reputation
level. If the reputation level of either the source or destination IP address is equal to or greater than the level set in the
policy, then the packet is forwarded, otherwise, the packet is dropped.
The five default reputation levels are:
1 Known malicious sites, such as phishing sites or sites related to botnet servers
2 High risk services sites, such as TOR, proxy, and P2P
3 Unverified sites
FortiOS 6.4.2 Administration Guide 881
Fortinet Inc.
Policy and Objects
4 Reputable social media sites, such as Facebook and Twitter
5 Known and verified safe sites, such as Gmail, Amazon, and eBay
The default minimum reputation level in a policy is zero, meaning that the reputation filter is disabled.
For IP addresses that are not included in the ISDB, the default reputation level is three.
The default reputation direction is destination.
To set the reputation level and direction in a policy using the CLI:
config firewall policy
edit 1
set srcintf "wan2"
set dstintf "wan1"
set dstaddr "all"
set reputation-minimum 3
set reputation-direction source
set action accept
set schedule "always"
set service "ALL"
set logtraffic all
set auto-asic-offload disable
set nat enable
next
end
Packets from the source IP address with reputation levels three, four, or five will be forwarded by this policy.
In a policy, if reputation-minimum is set, and the reputation-direction is
destination, then the dstaddr, service, and internet-service options are removed
from the policy.
If reputation-minimum is set, and the reputation-direction is source, then the
srcaddr, and internet-service-src options are removed from the policy.
Internet service groups in policies
This feature provides support for Internet Service Groups in traffic shaping and firewall policies. Service groups can be
used as the source and destination of the policy. Internet Service Groups are used as criteria to match traffic; the shaper
will be applied when the traffic matches.
To use a group as a destination, internet-service must be enabled. To use a group as a source, internet-
service-src must be enabled.
The following CLI variables are available in the firewall policy and firewall shaping-policy commands:
Variable Description
internet-service-group <string> Internet Service group name.
internet-service-custom-group <string> Custom Internet Service group name.
FortiOS 6.4.2 Administration Guide 882
Fortinet Inc.
Policy and Objects
Variable Description
internet-service-src-group <string> Internet Service source group name.
internet-service-src-custom-group <string> Custom Internet Service source group name.
Examples
The following examples use the below topology.
Example 1
In this example, the PC is allowed to access Google, so all Google services are put into an Internet Service Group.
To configure access to Google services using an Internet Service Group using the CLI:
1. Create a Service Group:
config firewall internet-service-group
edit "Google_Group"
set direction destination
set member 65537 65538 65539 65540 65542 65543 65544 65545 65550 65536 65646
next
end
2. Create a firewall policy to allow access to all Google Services from the PC:
config firewall policy
edit 1
set name "PC to Google"
set srcintf "port2"
set dstintf "port1"
set srcaddr "PC"
set internet-service enable
set internet-service-group "Google_Group"
set action accept
set schedule "always"
set fsso disable
set nat enable
next
end
To configure access to Google services using an Internet Service Group in the GUI:
1. On the FortiGate, create a Service Group using the CLI.
2. Go to Policy & Objects > Firewall Policy, and create a new policy.
FortiOS 6.4.2 Administration Guide 883
Fortinet Inc.
Policy and Objects
3. Set the Destination as the just created Internet Service Group.
4. Configure the remaining options as shown, then click OK.
On the policy page, hover over the group to view a list of its members.
Example 2
In this example, two office FTP servers are put into an Internet Custom Service Group, and the PC connection to the FTP
servers is limited to 1Mbps.
To put two FTP servers into a custom service group and limit the PC connection speed to them using
the CLI:
1. Create custom internet services for the internal FTP servers:
config firewall internet-service-custom
edit "FTP_PM"
config entry
FortiOS 6.4.2 Administration Guide 884
Fortinet Inc.
Policy and Objects
edit 1
config port-range
edit 1
set start-port 21
set end-port 21
next
end
set dst "PM_Server"
next
end
next
edit "FTP_QA"
config entry
edit 1
config port-range
edit 1
set start-port 21
set end-port 21
next
end
set dst "QA_Server"
next
end
next
end
2. Create a custom internet server group and add the just created custom internet services to it:
config firewall internet-service-custom-group
edit "Internal_FTP"
set member "FTP_QA" "FTP_PM"
next
end
3. Create a traffic shaper to limit the maximum bandwidth:
config firewall shaper traffic-shaper
edit "Internal_FTP_Limit_1Mbps"
set guaranteed-bandwidth 500
set maximum-bandwidth 1000
set priority medium
next
end
4. Create a firewall shaping policy to limit the speed from the PC to the internal FTP servers:
config firewall shaping-policy
edit 1
set name "For Internal FTP"
set internet-service enable
set internet-service-custom-group "Internal_FTP"
set dstintf "port1"
set traffic-shaper "Internal_FTP_Limit_1Mbps"
set traffic-shaper-reverse "Internal_FTP_Limit_1Mbps"
set srcaddr "PC"
next
end
FortiOS 6.4.2 Administration Guide 885
Fortinet Inc.
Policy and Objects
To put two FTP servers into a custom service group and limit the PC connection speed to the using the
GUI:
1. Create custom internet services for the internal FTP servers using the CLI.
2. Create a custom internet server group and add the just created custom internet services to it using the CLI.
3. Create a traffic shaper to limit the maximum bandwidth:
a. Go to Policy & Objects > Traffic Shapers, and click Create New.
b. Enter a Name for the shaper, such as Internal_FTP_Limit_1Mbps.
c. Set the Traffic Priority to Medium.
d. Enable Max Bandwidth and set it to 1000.
e. Enable Guaranteed Bandwidth and set it to 500.
f. Click OK.
4. Create a firewall shaping policy to limit the speed from the PC to the internal FTP servers:
a. Go to Policy & Objects > Traffic Shaping Policy, and click Create New.
b. Set the Destination as the just created Custom Internet Service Group, and apply the just create traffic shaper.
c. Configure the remaining options as shown, then click OK.
Allow creation of ISDB objects with regional information
Geographic-based Internet Service Database (ISDB) objects allow users to define a country, region, and city. These
objects can be used in firewall policies for more granular control over the location of the parent ISDB object. ISDB
objects are now referenced in policies by name instead of ID.
To apply a location-based ISDB object to a policy in the GUI:
1. Create the ISDB object:
a. Go to Policy & Objects > Internet Service Database and click Create New > Geographic Based Internet
Service.
FortiOS 6.4.2 Administration Guide 886
Fortinet Inc.
Policy and Objects
b. Configure the settings as required.
c. Click OK.
2. View the IP ranges in the location-based internet service:
a. Go to Policy & Objects > Internet Service Database .
b. In the table, hover over the object created in step 1 and click View/Edit Entries. The list of IPs is displayed:
c. Click Return.
3. Add the ISDB object to a policy:
a. Go to Policy & Objects > Firewall Policy. Create a new policy or edit an existing policy.
b. For Destination, click Internet Service and select the ISDB object created in step 1.
c. Configure the other settings as needed.
FortiOS 6.4.2 Administration Guide 887
Fortinet Inc.
Policy and Objects
d. Click OK.
To apply a location-based ISDB object to a policy in the CLI:
1. Create the ISDB object:
config firewall internet-service-name
edit "test-location-isdb-1"
set type location
set internet-service-id 65536
set country-id 840
set region-id 283
set city-id 23352
next
end
2. View the IP ranges in the location-based internet service:
# diagnose internet-service id 65536 | grep "country(840) region(283) city(23352)"
3. Add the ISDB object to a policy:
config firewall policy
edit 99
set name "Demo_Policy"
set srcintf "wan2"
set dstintf "wan1"
set srcaddr "all"
set internet-service enable
set internet-service-name "test-location-isdb-1"
set action accept
set schedule "always"
set logtraffic all
set logtraffic-start enable
set auto-asic-offload disable
set comments "1"
set nat enable
next
end
Internet service customization
Internet Service Database (ISDB) entries can be tuned for their environments by adding custom ports and port ranges,
as well as port mapping.
To add a custom port range:
config firewall internet-service-addition
edit 65646
set comment "Add custom port-range:tcp/8080-8090 into 65646"
config entry
edit 1
set protocol 6
config port-range
edit 1
set start-port 8080
FortiOS 6.4.2 Administration Guide 888
Fortinet Inc.
Policy and Objects
set end-port 8090
next
end
next
end
next
end
Warning: Configuration will only be applied after rebooting or using the 'execute internet-
service refresh' command.
To verify that the change was applied:
# diagnose internet-service info FG-traffic 6 8080 2.20.183.160
Internet Service: 65646(Google.Gmail)
To configure additional port mapping:
config firewall internet-service-append
set match-port 10
set append-port 20
end
Warning: Configuration will only be applied after rebooting or using the 'execute internet-
service refresh' command.
NAT64 policy and DNS64 (DNS proxy)
NAT64 policy translates IPv6 addresses to IPv4 addresses so that a client on an IPv6 network can communicate
transparently with a server on an IPv4 network.
NAT64 policy is usually implemented in combination with the DNS proxy called DNS64. DNS64 synthesizes AAAA
records from A records and is used to synthesize IPv6 addresses for hosts that only have IPv4 addresses. DNS proxy
and DNS64 are interchangeable terms.
Sample topology
In this example, a host on the internal IPv6 network communicates with ControlPC.qa.fortinet.com that only has
IPv4 address on the Internet.
1. The host on the internal network does a DNS lookup for ControlPC.qa.fortinet.com by sending a DNS query
for an AAAA record for ControlPC.qa.fortinet.com.
FortiOS 6.4.2 Administration Guide 889
Fortinet Inc.
Policy and Objects
2. The DNS query is intercepted by the FortiGate DNS proxy. The DNS proxy performs an A-record query for
ControlPC.qa.fortinet.com and gets back an RRSet containing a single A record with the IPv4 address
172.16.200.55.
3. The DNS proxy then synthesizes an AAAA record. The IPv6 address in the AAAA record begins with the configured
NAT64 prefix in the upper 96 bits and the received IPv4 address in the lower 32 bits. By default, the resulting IPv6
address is 64:ff9b::172.16.200.55.
4. The host on the internal network receives the synthetic AAAA record and sends a packet to the destination address
64:ff9b::172.16.200.55.
5. The packet is routed to the FortiGate internal interface (port10) where it is accepted by the NAT64 security policy.
6. The FortiGate unit translates the destination address of the packets from IPv6 address
64:ff9b::172.16.200.55 to IPv4 address 172.16.200.55 and translates the source address of the packets
to 172.16.200.200 (or another address in the IP pool range) and forwards the packets out the port9 interface to
the Internet.
Sample configuration
To enable display for IPv6, NAT46/NAT64, and DNS Database using the GUI:
1. Go to System > Feature Visibility.
2. In the Basic Features section, enable IPv6.
3. In the Additional Features section, enable the following features:
l NAT46 & NAT64
l DNS Database
4. Click Apply.
To enable display for IPv6, NAT46/NAT64, and DNS Database using the CLI:
config system global
set gui-ipv6 enable
end
config system settings
set gui-nat46-64 enable
set gui-dns-database enable
end
To enable DNS proxy on the IPv6 interface using the GUI:
1. Go to Network > DNS Servers.
2. In DNS Service on Interface, click Create New.
3. For Interface, select port10.
4. Click OK.
To enable DNS proxy on the IPv6 interface using the CLI:
config system dns-server
edit "port10"
set mode forward-only
next
end
FortiOS 6.4.2 Administration Guide 890
Fortinet Inc.
Policy and Objects
To configure IPv6 DHCP server using the CLI:
config system dhcp6 server
edit 1
set subnet 2001:db8:1::/64
set interface "port10"
config ip-range
edit 1
set start-ip 2001:db8:1::11
set end-ip 2001:db8:1::20
next
end
set dns-server1 2001:db8:1::10
next
end
To enable NAT64 and related settings using the CLI:
Enabling NAT64 with the config system nat64 command means that all IPv6 traffic received by the current VDOM
can be subject to NAT64 if the source and destination address matches an NAT64 security policy.
By default, the setting always-synthesize-aaaa-record is enabled. If you disable this setting, the DNS proxy
(DNS64) will attempt to find an AAAA records for queries to domain names and therefore resolve the host names to IPv6
addresses. If the DNS proxy cannot find an AAAA record, it synthesizes one by adding the NAT64 prefix to the A record.
nat64-prefix setting is the nat64 prefix. By default, it is 64:ff9b::/96.
config system nat64
set status enable
end
To create NAT64 policy using the GUI:
1. Add an IPv4 firewall address for the external network.
a. Go to Policy & Object > Addresses.
b. Click Create New.
c. For Name, enter external-net4.
d. For IP/Network, enter 17216.200.0/24.
e. For Interface, select port9.
f. Click OK.
2. Add an IPv6 firewall address for the internal network.
a. Go to Policy & Object > Addresses.
b. Click Create New.
c. Change Category to IPv6 Address.
d. For Name, enter internal-net6.
e. For IPv6 Address, enter 2001:db8:1::/48.
f. Click OK.
3. Add an IP pool containing the IPv4 address that is used as the source address of the packets exiting port9.
a. Go to Policy & Object > IP Pools.
b. Click Create New.
c. For Name, enter exit-pool4.
FortiOS 6.4.2 Administration Guide 891
Fortinet Inc.
Policy and Objects
d. For External IP Range, enter 172.16.200.200-172.16.200.210.
e. Click OK.
4. Add a NAT64 policy that allows connections from the internal IPv6 network to the external IPv4 network.
a. Go to Policy & Object > NAT64 Policy.
b. Click Create New.
c. For Incoming Interface, select port10.
d. For Outgoing Interface, select port9.
e. For Source Address, select internal-net6.
f. For Destination Address, select external-net4.
g. Set IP Pool Configuration to Use Dynamic IP Pool and select the IP pool exit-pool4.
h. Click OK.
To create NAT64 policy using the CLI:
config firewall address
edit "external-net4"
set associated-interface "port9"
set subnet 172.16.200.0 255.255.255.0
next
end
config firewall address6
edit "internal-net6"
set ip6 2001:db8:1::/48
next
end
config firewall ippool
edit "exit-pool4"
set startip 172.16.200.200
set endip 172.16.200.210
next
end
config firewall policy64
edit 1
set srcintf "port10"
set dstintf "port9"
set srcaddr "internal-net6"
set dstaddr "external-net4"
set action accept
set schedule "always"
set service "ALL"
set ippool enable
set poolname "exit-pool4"
next
end
NAT46 policy
NAT46 refers to the mechanism that allows IPv4 addressed hosts to communicate with IPv6 hosts. Without such a
mechanism, IPv4 environments cannot connect to IPv6 networks.
FortiOS 6.4.2 Administration Guide 892
Fortinet Inc.
Policy and Objects
Sample topology
In this example, an IPv4 client tries to connect to an IPv6 server. A VIP is configured on FortiGate to map the server IPv6
IP address 2000:172:16:200:55 to an IPv4 address 10.1.100.55. On the other side, an IPv6 IP pool is configured
and the source address of packets from client are changed to the defined IPv6 address. In this setup, the client PC can
access the server by using IP address 10.1.100.55.
Sample configuration
To enable display for IPv6 and NAT46/NAT64 using the GUI:
1. Go to System > Feature Visibility.
2. In the Basic Features section, enable IPv6.
3. In the Additional Features section, enable NAT46 & NAT64.
4. Click Apply.
To enable display for IPv6 and NAT46/NAT64 using the CLI:
config system global
set gui-ipv6 enable
end
config system settings
set gui-nat46-64 enable
end
To configure VIP46 using the GUI:
1. Go to Policy & Object > Virtual IPs.
2. Click Create New.
3. For Name, enter vip46_server.
4. For External IP Address/Range, enter 10.1.100.55- 10.1.100.55.
5. For Mapped IP Address/Range, enter 2000:172:16:200::55.
6. Click OK.
To configure VIP46 using the CLI:
config firewall vip46
edit "vip46_server"
set extip 10.1.100.55
set mappedip 2000:172:16:200::55
next
end
FortiOS 6.4.2 Administration Guide 893
Fortinet Inc.
Policy and Objects
To configure IPv6 IP pool using the GUI:
1. Go to Policy & Object > IP Pools.
2. Click Create New.
3. For Name, enter client_expternal.
4. For External IP Range, enter 2000:172:16:201::11- 2000:172:16:201::20.
5. Click OK.
To configure IPv6 IP pool using the CLI:
config firewall ippool6
edit "client_external"
set startip 2000:172:16:201::11
set endip 2000:172:16:201::20
next
end
To enable NAT64 and configure address prefix using the CLI:
config system nat64
set status enable
set secondary-prefix-status enable
config secondary-prefix
edit "1"
set nat64-prefix 2000:172:16:201::/96
next
end
end
To create NAT46 policy using the GUI:
1. Go to Policy & Object > NAT46 Policy.
2. Click Create New.
3. For Incoming Interface, select port10.
4. For Outgoing Interface, select port9.
5. For Source Address, select all.
6. For Destination Address, select vip46_server.
7. Set IP Pool Configuration to Use Dynamic IP Pool and select the IP pool client_expernal.
8. Click OK.
To create NAT46 policy using the CLI:
config firewall policy46
edit 1
set srcintf "port10"
set dstintf "port9"
set srcaddr "all"
set dstaddr "vip46_server"
set action accept
set schedule "always"
set service "ALL"
set ippool enable
FortiOS 6.4.2 Administration Guide 894
Fortinet Inc.
Policy and Objects
set poolname "client_external"
next
end
Sample troubleshooting
Example to trace flow to see the whole process.
# diagnose debug flow filter saddr 10.1.100.11
# diagnose debug flow show function-name enable
show function name
# diagnose debug flow show iprope enable
show trace messages about iprope
# diagnose debug flow trace start 5
id=20085 trace_id=1 func=print_pkt_detail line=5401 msg="vd-root:0 received a packet
(proto=1, 10.1.100.11:27592->10.1.100.55:2048) from port10. type=8, code=0, id=27592,
seq=1."
id=20085 trace_id=1 func=init_ip_session_common line=5561 msg="allocate a new session-
000003b9"
id=20085 trace_id=1 func=iprope_dnat_check line=4948 msg="in-[port10], out-[]"
id=20085 trace_id=1 func=iprope_dnat_tree_check line=822 msg="len=1"
id=20085 trace_id=1 func=__iprope_check_one_dnat_policy line=4822 msg="checking gnum-100000
policy-1"
id=20085 trace_id=1 func=get_vip46_addr line=998 msg="find DNAT46: IP-2000:172:16:200::55,
port-27592"
id=20085 trace_id=1 func=__iprope_check_one_dnat_policy line=4904 msg="matched policy-1,
act=accept, vip=1, flag=100, sflag=2000000"
id=20085 trace_id=1 func=iprope_dnat_check line=4961 msg="result: skb_flags-02000000, vid-1,
ret-matched, act-accept, flag-00000100"
id=20085 trace_id=1 func=fw_pre_route_handler line=183 msg="VIP-10.1.100.55:27592, outdev-
unkown"
id=20085 trace_id=1 func=__ip_session_run_tuple line=3220 msg="DNAT 10.1.100.55:8-
>10.1.100.55:27592"
id=20085 trace_id=1 func=vf_ip_route_input_common line=2594 msg="find a route: flag=80000000
gw-10.1.100.55 via root"
id=20085 trace_id=1 func=ip4_nat_af_input line=601 msg="nat64 ipv4 received a packet
proto=1"
id=20085 trace_id=1 func=__iprope_check line=2112 msg="gnum-100012, check-ffffffffa0024ebe"
id=20085 trace_id=1 func=__iprope_check_one_policy line=1873 msg="checked gnum-100012
policy-1, ret-matched, act-accept"
id=20085 trace_id=1 func=__iprope_user_identity_check line=1677 msg="ret-matched"
id=20085 trace_id=1 func=get_new_addr46 line=1047 msg="find SNAT46: IP-2000:172:16:201::13
(from IPPOOL), port-27592"
id=20085 trace_id=1 func=__iprope_check_one_policy line=2083 msg="policy-1 is matched, act-
accept"
id=20085 trace_id=1 func=__iprope_check line=2131 msg="gnum-100012 check result: ret-
matched, act-accept, flag-08050500, flag2-00200000"
id=20085 trace_id=1 func=iprope_policy_group_check line=4358 msg="after check: ret-matched,
act-accept, flag-08050500, flag2-00200000"
id=20085 trace_id=1 func=resolve_ip6_tuple line=4389 msg="allocate a new session-00000081"
FortiOS 6.4.2 Administration Guide 895
Fortinet Inc.
Policy and Objects
Local-in policies
While security profiles control traffic flowing through the FortiGate, local-in policies control inbound traffic that is going to
a FortiGate interface.
Administrative access traffic (HTTPS, PING, SSH, and others) can be controlled by allowing or denying the service in the
interface settings. Trusted hosts can be configured under an administrator to restrict the hosts that can access the
administrative service.
Local-in policies allow administrators to granularly define the source and destination addresses, interface, and services.
Traffic destined for the FortiGate interface specified in the policy that meets the other criteria is subject to the policies
action.
Local-in policies can be used to restrict administrative access or other services, such as VPN, that can be specified as
services. You can define source addresses or address groups to restrict access from. For example, by using a
geographic type address you can restrict a certain geographic set of IP addresses from accessing the FortiGate.
By default, no local-in policies are defined, so there are no restrictions on local-in traffic.
Local-in policies can only be created or edited in the CLI. You can view the existing local-in
policies in the GUI by enabling it in System > Feature Visibility under the Additional Features
section. This page does not list the custom local-in policies.
To configure a local-in policy using the CLI:
config firewall {local-in-policy | local-in-policy6}
edit <policy_number>
set intf <interface>
set srcaddr <source_address> [source_address] ...
set dstaddr <destination_address> [destination_address] ...
set action {accept | deny}
set service <service_name> [service_name] ...
set schedule <schedule_name>
set comments <string>
next
end
For example, to prevent the source subnet 10.10.10.0/24 from pinging port1, but allow administrative access for PING
on port1:
config firewall address
edit "10.10.10.0"
set subnet 10.10.10.0 255.255.255.0
next
end
config firewall local-in-policy
edit 1
set intf "port1"
set srcaddr "10.10.10.0"
set dstaddr "all"
set service "PING"
set schedule "always"
next
end
FortiOS 6.4.2 Administration Guide 896
Fortinet Inc.
Policy and Objects
To test the configuration:
1. From the PC at 10.10.10.12, start a continuous ping to port1:
ping 192.168.2.5 –t
2. On the FortiGate, enable debug flow:
# diagnose debug flow filter addr 10.10.10.12
# diagnose debug flow filter proto 1
# diagnose debug enable
# diagnose debug flow trace start 10
3. The output of the debug flow shows that traffic is dropped by local-in policy 1:
# id=20085 trace_id=1 func=print_pkt_detail line=5746 msg="vd-root:0 received a packet
(proto=1, 10.10.10.12:1->192.168.2.5:2048) from port1. type=8, code=0, id=1, seq=128."
id=20085 trace_id=1 func=init_ip_session_common line=5918 msg="allocate a new session-
0017c5ad"
id=20085 trace_id=1 func=vf_ip_route_input_common line=2615 msg="find a route:
flag=80000000 gw-192.168.2.5 via root"
id=20085 trace_id=1 func=fw_local_in_handler line=474 msg="iprope_in_check() check
failed on policy 1, drop"
Additional options
To disable or re-enable the local-in policy, use the set status {enable | disable} command.
To dedicate the interface as an HA management interface, use the set ha-mgmt-intf-only enable command.
IPv4/IPv6 access control lists
Access control lists (ACL) in the FortiOS firmware is a granular or more specifically targeted blocklist. ACL drop IPv4 and
IPv6 packets at the physical network interface before the packets are analyzed by the CPU. On a busy appliance, this
can really improve performance.
ACL is available on FortiGates with NP6-accelerated interfaces. ACL checking is one of the first things that happens to
the packet and checking is done by the NP6 processor. The result is very efficient protection that does not use CPU or
memory resources.
The following platforms support ACL:
l FGT_100D, FGT_100E, FGT_100EF, FGT_101E.
l FGT_140D, FGT_140D_POE, FGT_140E, FGT_140E_POE.
l FGT_301E, FGT_500E, FGT_501E.
l FGT_1200D, FGT_1500D, FGT_1500DT.
l FGT_2000E, FGT_2500E.
l FGT_3000D, FGT_3100D, FGT_3200D, FGT_3700D.
l FGT_3800D, FGT_3810D, FGT_3815D.
l FGT_3960E, FGT_3980E.
FortiOS 6.4.2 Administration Guide 897
Fortinet Inc.
Policy and Objects
Limitation
The configuration of ACL allows you to specify which interface the ACL is applied to. You should be aware of a hardware
limitation. The ACL is a Layer 2 function and is offloaded to the ISF hardware. Therefore, no CPU resources are used in
the processing of the ACL. It is handled by the inside switch chip which can do hardware acceleration, which increases
the performance of the FortiGate. The drawback is that the ACL function is only supported on switch fabric driven
interfaces. It also cannot be applied to hardware switch interfaces or their members. Ports such as WAN1 or WAN2 on
some models that use network cards that connect to the CPU through a PCIe bus do not support ACL.
Sample configuration
To block all IPv4 and IPv6 Telnet traffic from port2 to Company_Servers using the CLI:
config firewall acl
edit 1
set interface "port2"
set srcaddr "all"
set dstaddr "Company_Servers"
set service "TELNET"
next
end
config firewall acl6
edit 1
set interface "port2"
set srcaddr "all"
set dstaddr "Company_Servers_v6"
set service "TELNET"
next
end
Sample troubleshooting
To check the number of packets drop by an ACL:
# diagnose firewall acl counter
ACL id 1 dropped 0 packets
To clear the packet drop counter:
# diagnose firewall acl clearcounter
Use the same commands for IPv6 ACL.
# diagnose firewall acl
counter Show number of packets dropped by ACL.
counter6 Show number of packets dropped by ACL6.
clearcounter Clear ACL packet counter.
clearcounter6 Clear ACL6 packet counter.
FortiOS 6.4.2 Administration Guide 898
Fortinet Inc.
Policy and Objects
Mirroring SSL traffic in policies
SSL mirroring allows the FortiGate to decrypt and mirror traffic to a designated port. A new decrypted traffic mirror profile
can be applied to IPv4, IPv6, and explicit proxy firewall policies in both flow and proxy mode. Full SSL inspection must be
used in the policy for the traffic mirroring to occur.
SSL inspection is automatically enabled when you enable a security profile on the policy configuration page.
To configure SSL mirroring in a policy in the GUI:
1. Go to Policy & Objects > Firewall Policy.
2. Create a new policy, or edit an existing one.
3. Configure the interfaces, sources, and other required information.
4. In the Security Profiles section, for SSL Inspection, select deep-inspection, or another profile that uses Full SSL
Inspection.
5. Enable Decrypted Traffic Mirror . The terms of use agreement opens.
6. Click Agree to accept the terms.
7. In the drop-down list, select a decrypted traffic mirror, or click Create to create a new one.
In this example, a new decrypted traffic mirror is created using the port3 interface.
FortiOS 6.4.2 Administration Guide 899
Fortinet Inc.
Policy and Objects
8. Click OK to save the policy.
To configure SSL mirroring in proxy mode in the CLI:
1. Create the decrypted traffic mirror profile:
config firewall decrypted-traffic-mirror
edit SSL-to-port3
set dstmac ff:ff:ff:ff:ff:ff
set traffic-type ssl
set traffic-source client
set interface port3
next
end
2. Configure the policy to enable SSL traffic mirroring:
config firewall policy
edit 1
set name "mirror-policy"
set srcintf "port1"
set dstintf "port2"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set nat enable
set ssl-ssh-profile "deep-inspection"
set decrypted-traffic-mirror "SSL-to-port3"
THIS IS A LEGALLY BINDING AGREEMENT BETWEEN YOU, THE USER AND ITS ORGANIZATION
("CUSTOMER"), AND FORTINET. BEFORE YOU CONTINUE WITH THE TERMS AND CONDITIONS OF THIS
CONTRACT (THE "FEATURE ENABLEMENT") CAREFULLY READ THE TERMS AND CONDITIONS OF THIS
AGREEMENT. BY ENTERING YES, YOU, AS AN AUTHORIZED REPRESENTATIVE ON BEHALF OF CUSTOMER,
CONSENT TO BE BOUND BY AND BECOME A PARTY TO THIS AGREEMENT ("AGREEMENT") AND YOU
REPRESENT THAT YOU HAVE READ AND UNDERSTAND THIS AGREEMENT AND HAVE HAD SUFFICIENT
OPPORTUNITY TO CONSULT WITH COUNSEL, PRIOR TO AGREEING TO THE TERMS HEREIN AND ENABLING
THIS FEATURE. IF YOU HAVE ANY QUESTIONS OR CONCERNS, OR DESIRE TO SUGGEST ANY
MODIFICATIONS TO THIS AGREEMENT, PLEASE CONTACT YOUR FORTINET SUPPORT REPRESENTATIVE TO
BE REFERRED TO FORTINET LEGAL. IF YOU DO NOT AGREE TO ALL OF THE TERMS OF THIS
AGREEMENT, DO NOT CONTINUE WITH THE ACCEPTANCE PROCESS. BY ACCEPTING THE TERMS AND
CONDITIONS HEREIN, CUSTOMER HEREBY AGREES THAT:
1. Customer represents and warrants that Customer, not Fortinet, is engaging this
feature.
2. Customer represents and warrants that Customer has provided the requisite notice(s)
and obtained the required consent(s) to utilize this feature.
FortiOS 6.4.2 Administration Guide 900
Fortinet Inc.
Policy and Objects
3. Customer represents and warrants that Customer will only access data as necessary in
a good faith manner to detect malicious traffic and will put in place processes and
controls to ensure this occurs.
4. Customer represents and warrants that Customer has the right to enable and utilize
this feature, and Customer is fully in compliance with all applicable laws in so doing.
5. Customer shall indemnify Fortinet in full for any of the above certifications being
untrue.
6. Customer shall promptly notify Fortinet Legal in writing of any breach of these Terms
and Conditions and shall indemnify Fortinet in full for any failure by Customer or any
of its employees or representatives to abide in full by the Terms and Conditions above.
7. Customer agrees that these Terms and Conditions shall be governed by the laws of the
State of California, without regards to the choice of laws provisions thereof and
Customer hereby agrees that any dispute related to these Terms and Conditions shall be
resolved in Santa Clara County, California, USA, and Customer hereby consents to
personal jurisdiction in Santa Clara County, California, USA.
Do you want to continue? (y/n) y
next
end
Inspection mode per policy
Inspection mode is configured on a per-policy basis in NGFW mode. This gives you more flexibility when setting up
different policies.
When configuring a firewall policy, you can select a Flow-based or Proxy-basedInspection Mode. The default setting is
Flow-based.
To configure inspection mode in a policy:
1. Go to Policy & Objects > Firewall Policy.
2. Create a new policy, or edit an existing policy.
FortiOS 6.4.2 Administration Guide 901
Fortinet Inc.
Policy and Objects
3. Configure the policy as needed.
a. If you change the Inspection Mode to Proxy-based, the Proxy HTTP(S) traffic option displays.
b. In the Security Profiles section, if no security profiles are enabled, the default SSL Inspection is no-inspection.
c. In the Security Profiles section, if you enable any security profile, the SSL Inspection changes to certificate-
inspection.
FortiOS 6.4.2 Administration Guide 902
Fortinet Inc.
Policy and Objects
To see the inspection mode changes using the CLI:
config firewall policy
edit 1
set srcintf "wan2"
set dstintf "wan1"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set inspection-mode proxy
set nat enable
next
end
To see the HTTP and SSH policy redirect settings when inspection mode is set to proxy using the CLI:
config firewall policy
edit 1
set srcintf "wan2"
set dstintf "wan1"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set inspection-mode proxy
set http-policy-redirect enable
set ssh-policy-redirect enable
FortiOS 6.4.2 Administration Guide 903
Fortinet Inc.
Policy and Objects
set nat enable
next
end
To see the default SSL-SSH policy set to no inspection using the CLI:
config firewall policy
edit 1
show fu | grep ssl-ssh-profile
set ssl-ssh-profile "no-inspection"
next
end
OSPFv3 neighbor authentication
OSPFv3 neighbor authentication is available for enhanced IPv6 security.
To configure an OSPF6 interface:
config router ospf6
config ospf6-interface
edit <name>
set authentication {none | ah | esp | area}
set key-rollover-interval <integer>
set ipsec-auth-alg {md5 | sha1 | sha256 | sha384 | sha512}
set ipsec-enc-alg {null | des | 3des | aes128 | aes192 | aes256}
config ipsec-keys
edit <spi>
set auth-key <string>
set enc-key <string>
next
end
next
end
end
To configure an OSPF6 virtual link:
config router ospf6
config area
edit <id>
config virtual-link
edit <name>
set authentication {none | ah | esp | area}
set key-rollover-interval <integer>
set ipsec-auth-alg {md5 | sha1 | sha256 | sha384 | sha512}
set ipsec-enc-alg {null | des | 3des | aes128 | aes192 | aes256}
config ipsec-keys
edit <spi>
set auth-key <string>
set enc-key <string>
next
end
next
FortiOS 6.4.2 Administration Guide 904
Fortinet Inc.
Policy and Objects
end
next
end
end
To configure an OSPF6 area:
config router ospf6
config area
edit <id>
set authentication {none | ah | esp}
set key-rollover-interval <integer>
set ipsec-auth-alg {md5 | sha1 | sha256 | sha384 | sha512}
set ipsec-enc-alg {null | des | 3des | aes128 | aes192 | aes256}
config ipsec-keys
edit <spi>
set auth-key <string>
set enc-key <string>
next
end
next
end
end
CLI command descriptions
Command Description
<id> Area entry IP address.
authentication {none | ah | esp | Authentication mode:
area} l none: Disable authentication
l ah: Authentication Header
l esp: Encapsulating Security Payload
l area: Use the routing area authentication configuration
key-rollover-interval <integer> Enter an integer value (300 - 216000, default = 300).
ipsec-auth-alg {md5 | sha1 | Authentication algorithm.
sha256 | sha384 | sha512}
ipsec-enc-alg {null | des | 3des | Encryption algorithm.
aes128 | aes192 | aes256}
<spi> Security Parameters Index.
auth-key <string> Authentication key should be hexadecimal numbers.
Key length for each algorithm:
l MD5: 16 bytes
l SHA1: 20 bytes
l SHA256: 32 bytes
l SHA384:48 bytes
l SHA512:84 bytes
If the key is shorter than the required length, it will be padded with zeroes.
FortiOS 6.4.2 Administration Guide 905
Fortinet Inc.
Policy and Objects
Command Description
enc-key <string> Encryption key should be hexadecimal numbers.
Key length for each algorithm:
l DES: 8 bytes
l 3DES: 24 bytes
l AES128: 16 bytes
l AES192: 24 bytes
l AES256: 32 bytes
If the key is shorter than the required length, it will be padded with zeroes.
Firewall anti-replay option per policy
When the global anti-replay option is disabled, the FortiGate does not check TCP flags in packets. The per policy anti-
replay option overrides the global setting. This allows you to control whether or not TCP flags are checked per policy.
To enable the anti-replay option so TCP flags are checked using the CLI:
config firewall policy
edit 1
set name "policyid-1"
set srcintf "wan2"
set dstintf "wan1"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set anti-replay enable
set logtraffic all
set nat enable
next
end
Enabling advanced policy options in the GUI
Advanced policy options can be enabled so you can configure the options in the GUI.
To enable advanced policy options:
config system settings
set gui-advanced-policy enable
end
Advanced policy options are now available when creating or editing a policy in the GUI:
FortiOS 6.4.2 Administration Guide 906
Fortinet Inc.
Policy and Objects
To enable configuring TCP sessions without SYN:
config system settings
set tcp-session-without-syn enable
end
TCP sessions without SYN can now be configured when creating or editing a policy in the GUI:
Recognize anycast addresses in geo-IP blocking
An anycast IP can be advertised from multiple locations and the router selects a path based on latency, distance, cost,
number of hops, and so on. This technique is widely used by providers to route users to the closest server. Since the IP
is hosted in multiple geographic locations, there is no way to specify one single location to that IP.
In FortiOS 6.4.2, there is an option to bypass anycast IP ranges in geo-IP blocking. The ISDB contains a list of confirmed
anycast IP ranges that can be used for this purpose.
FortiOS 6.4.2 Administration Guide 907
Fortinet Inc.
Policy and Objects
When the source or destination is set to geoip, you can enable the geoip-anycast option. Once enabled, IPs where
the anycast option is set to 1 in geoip_db are bypassed in country matching and blocking.
You can only use the CLI to configure this feature.
To enable the geoip-anycast option using the CLI:
config firewall policy
edit 1
set name "policyid-1"
set srcintf "wan2"
set dstintf "wan1"
set srcaddr "all"
set dstaddr "test-geoip-CA_1"
set action accept
set schedule "always"
set service "ALL"
set geoip-anycast enable
set logtraffic all
set nat enable
next
end
To check the geoip-anycast option for an IP address using the CLI:
diagnose geoip ip2country 1.0.0.1
1.0.0.1 - Australia, is anycast ip
The anycast IP is 1.0.0.1.
Matching GeoIP by registered and physical location
IP addresses have both a physical and registered location in the geography IP database. Sometimes these two locations
are different. The geoip-match command allows users to match an IPv4 address in an firewall policy to its physical or
registered location when a GeoIP is used as a source or destination address. IPv6 policies currently support geography
address objects but do not support geoip-match.
In the following example, the physical location of 220.243.219.10 is CA (Canada), the registered location is CN (China),
and it is not an anycast IP.
To configure GeoIP matching based on registered location:
1. Create a firewall policy to match the IP:
config firewall policy
edit 1
set name "policy_id_1"
set srcintf "wan2"
set dstintf "wan1"
set srcaddr "all"
FortiOS 6.4.2 Administration Guide 908
Fortinet Inc.
Policy and Objects
set dstaddr "test-geoip-CA"
set action accept
set schedule "always"
set service "ALL"
set geoip-match registered-location
set logtraffic all
set auto-asic-offload disable
set nat enable
next
end
Since CA is applied as a destination address and registered location IP matching is enabled, if the destination IP of
the traffic is 220.243.219.10, then the traffic will be blocked because the registered location is CN.
2. Verify that the policy is blocking traffic from the IP address:
# diagnose sniffer packet any icmp 4
interfaces=[any]
filters=[icmp]
5.383798 wan2 in 10.1.100.41 -> 220.243.219.10: icmp: echo request
6.381982 wan2 in 10.1.100.41 -> 220.243.219.10: icmp: echo request
7.382608 wan2 in 10.1.100.41 -> 220.243.219.10: icmp: echo request
^C
3 packets received by filter
0 packets dropped by kernel
To configure GeoIP matching based on physical location:
1. Create a firewall policy to match the IP:
config firewall policy
edit 1
set name "policy_id_1"
set srcintf "wan2"
set dstintf "wan1"
set srcaddr "all"
set dstaddr "test-geoip-CA"
set action accept
set schedule "always"
set service "ALL"
set geoip-match physical-location
set logtraffic all
set auto-asic-offload disable
set nat enable
next
end
Since CA is applied as a destination address and physical location IP matching is enabled, if the destination IP of
the traffic is 220.243.219.10, then the traffic will pass through.
2. Verify that the policy is allowing traffic from the IP address:
# diagnose sniffer packet any icmp 4
interfaces=[any]
filters=[icmp]
5.273985 wan2 in 10.1.100.41 -> 220.243.219.10: icmp: echo request
5.274176 wan1 out 172.16.200.10 -> 220.243.219.10: icmp: echo request
6.274426 wan2 in 10.1.100.41 -> 220.243.219.10: icmp: echo request
6.274438 wan1 out 172.16.200.10 -> 220.243.219.10: icmp: echo request
FortiOS 6.4.2 Administration Guide 909
Fortinet Inc.
Policy and Objects
7.273978 wan2 in 10.1.100.41 -> 220.243.219.10: icmp: echo request
7.273987 wan1 out 172.16.200.10 -> 220.243.219.10: icmp: echo request
^C
6 packets received by filter
0 packets dropped by kernel
Authentication policy extensions
By default, unauthenticated traffic is permitted to fall to the next policy. This means that unauthenticated users are only
forced to authenticate against a policy when there are no other matching policies. To avoid this, you can force
authentication to always take place.
To set that authentication requirement:
config user setting
set auth-on-demand {always | implicitly}
end
Where:
always Always trigger firewall authentication on demand.
implicitly (default) Implicitly trigger firewall authentication on demand. This is the default setting (and
the behavior in FortiOS 6.0 and earlier).
In the following example, authentication is required; traffic that would otherwise be allowed by the second policy is
instead blocked by the first policy.
To use forced authentication:
config user setting
set auth-on-demand always
end
config firewall policy
edit 1
set name "QA to Database"
set srcintf "port10"
set dstintf "port9"
set srcaddr "QA_subnet"
set dstaddr "Database"
set action accept
set schedule "always"
set service "ALL"
set fsso disable
set groups "qa_group"
set nat enable
next
edit 2
set name "QA to Internet"
set srcintf "port10"
set dstintf "port9"
set srcaddr "QA_subnet"
set dstaddr "all"
FortiOS 6.4.2 Administration Guide 910
Fortinet Inc.
Policy and Objects
set action accept
set schedule "always"
set service "ALL"
set fsso disable
set nat enable
next
end
HTTP to HTTPS redirect for load balancing
You can configure a virtual server with HTTP to HTTPS redirect enabled. When enabled, a virtual server can convert a
client's HTTP requests to HTTPS requests. Through this mandatory conversion, HTTP traffic is converted to
HTTPS traffic. This conversion improves the security of the user network.
You can only enable this feature by using the CLI. After you enable this feature, traffic flows as follows:
l When FortiGate receives an HTTP request for an external IP, such as 10.1.100.201 in the following example,
FortiGate sends an HTTP 303 response back to the original client and redirects HTTP to HTTPS, instead of
forwarding the HTTP request to the real backend servers.
l The client browser restarts the TCP session to HTTPS.
l The HTTPS session comes to the FortiGate where a matching firewall policy allows the HTTPS traffic and
establishes a secure SSL connection, and then forwards the request to the real backend servers.
To configure virtual server with HTTPS redirect enabled:
1. Create a virtual server with server-type set to http:
config firewall vip
edit "virtual-server-http"
set type server-load-balance
set extip 10.1.100.201
set extintf "wan2"
set server-type http
set ldb-method round-robin
set extport 80
config realservers
edit 1
set ip 172.16.200.44
set port 80
next
edit 2
set ip 172.16.200.55
set port 80
next
end
next
end
2. Create a virtual server with server-type set to https and with the same external IP address:
config firewall vip
edit "virtual-server-https"
set type server-load-balance
set extip 10.1.100.201
set extintf "wan2"
set server-type https
set ldb-method round-robin
FortiOS 6.4.2 Administration Guide 911
Fortinet Inc.
Policy and Objects
set extport 443
config realservers
edit 1 set ip 172.16.200.44
set port 443
next
edit 2
set ip 172.16.200.55
set port 443
next
end
set ssl-certificate "Fortinet_CA_SSL"
next
end
3. Enable the http-redirect option for the virtual server with server-type set to http:
config firewall vip
edit "virtual-server-http"
set http-redirect enable
next
end
4. Add the two virtual servers to a policy:
config firewall policy
edit 9
set srcintf "wan2"
set dstintf "wan1"
set srcaddr "all"
set dstaddr "virtual-server-http" "virtual-server-https"
set action accept
set schedule "always"
set service "ALL"
set inspection-mode proxy set logtraffic all
set auto-asic-offload disable
set nat enable
next
end
GTPv2 in policies
You can use GTPv2 in the policy section of a GTP profile.
GTPv2 is only available for the following advanced fields:
l apnmember
l apn-sel-mode
l messages
l max-apn-restriction
l imsi-prefix
l msisdn-prefix
l rat-type
l mei
l uli
FortiOS 6.4.2 Administration Guide 912
Fortinet Inc.
Policy and Objects
GTPv2 support includes the following changes for overall GTP support:
l rai is no longer supported in any GTP version.
l uli can coexist with CGI, SAI, RAI, TAI, ECGI, or LAI, each of which has the pattern MCC.MNC.ID or
MCC.MNC.ID.ID2.
l mei can take IMEI (15 digits) or IMEISV (16 digits).
To configure a new GTPv2 policy:
config firewall gtp
edit "gtpv2"
config policy-v2
edit 1
set messages create-ses-req
next
end
next
end
To configure the new ULI format:
This example matches packets with TAI 510-519.01-09.d02a and ECGI 505.02.1409900-14099ff.
config firewall gtp
edit "gtpv2"
config policy-v2
edit 1
set messages create-ses-req
set uli "0" "0" "0" "51*.01-09.d02a" "505.02.14099*"
next
end
next
end
To configure the GTPv2 message type:
config firewall gtp
edit "gtpv2"
config policy-v2
edit 1
set messages create-ses-req create-ses-res modify-bearer-req modify-bearer-
res
next
end
next
end
To configure the RAT type:
This example includes virtual and NB-IoT types.
config firewall gtp
edit "gtpv2"
config policy-v2
edit 1
FortiOS 6.4.2 Administration Guide 913
Fortinet Inc.
Policy and Objects
set messages create-ses-req
set rat-type virtual nbiot
next
end
next
end
Use active directory objects directly in policies
Active Directory (AD) groups can be used directly in identity-based firewall policies. You do not need to add remote AD
groups to local FSSO groups before using them in policies.
FortiGate administrators can define how often group information is updated from AD LDAP servers.
To retrieve and use AD user groups in policies:
1. Set the FSSO Collector Agent AD access mode on page 914
2. Add an LDAP server on page 915
3. Create the FSSO collector that updates the AD user groups list on page 915
4. Use the AD user groups in a policy on page 917
Set the FSSO Collector Agent AD access mode
To use this feature, you must set FSSO Collector Agent to Advanced AD access mode. If the FSSO Collector Agent is
running in the default mode, FortiGate cannot correctly match user group memberships.
FortiOS 6.4.2 Administration Guide 914
Fortinet Inc.
Policy and Objects
Add an LDAP server
To add an LDAP server in the GUI:
1. Go to User & Authentication > LDAP Servers.
2. Click Create New.
3. Configure the settings as needed.
4. If secure communication over TLS is supported by the remote AD LDAP server:
a. Enable Secure Connection .
b. Select the protocol.
c. Select the certificate from the CA that issued the AD LDAP server certificate.
If the protocol is LDAPS, the port will automatically change to 636.
5. Click OK.
To add an LDAP server in the CLI:
config user ldap
edit "AD-ldap"
set server "10.1.100.131"
set cnid "cn"
set dn "dc=fortinet-fsso,dc=com"
set type regular
set username "cn=Administrator,cn=users,dc=fortinet-fsso,dc=com"
set password XXXXXXXXXXXXXXXXXXXXXXXX
next
end
Create the FSSO collector that updates the AD user groups list
To create an FSSO agent connector in the GUI:
1. Go to Security Fabric > External Connectors.
2. Click Create New.
3. In the Endpoint/Identity section, click Fortinet Single Sign-On Agent.
4. Fill in the Name
5. Set the Primary FSSO Agent to the IP address of the FSSO Collector Agent, and enter its password.
6. Set the User Group Source to Local.
7. Set the LDAP Server to the just created AD-ldap server.
FortiOS 6.4.2 Administration Guide 915
Fortinet Inc.
Policy and Objects
8. Enable Proactively Retrieve from LDAP Server.
9. Set the Search Filter to (&(objectClass=group)(cn=group*)).
The default search filter retrieves all groups, including Microsoft system groups. In this example, the filter is
configured to retrieve group1, group2, etc, and not groups like grp199.
The filter syntax is not automatically checked; if it is incorrect, the FortiGate might not retrieve any groups.
10. Set the Interval (minutes) to configure how often the FortiGate contacts the remote AD LDAP server to update the
group information.
11. Click OK.
12. To view the AD user groups that are retrieved by the FSSO agent, hover the cursor over the group icon on the fabric
connector listing.
To create an FSSO agent connector in the CLI:
config user fsso
edit "ad-advanced"
set server "10.1.100.131"
set password XXXXXXXXXXXXXX
set ldap-server "AD-ldap"
set ldap-poll enable
set ldap-poll-interval 2
set ldap-poll-filter "(&(objectClass=group)(cn=group*))"
next
end
You view the retrieved AD user groups with the show user adgrp command.
FortiOS 6.4.2 Administration Guide 916
Fortinet Inc.
Policy and Objects
Use the AD user groups in a policy
The AD user groups retrieved by the FortiGate can be used directly in firewall policies.
FortiGate Cloud / FDN communication through an explicit proxy
Explicit proxy communication to FortiGate Cloud and FortiGuard servers from FortiGate is enabled. A proxy server can
be configured in the FortiGuard settings so that all FortiGuard connections under the forticldd process can be
established through the proxy server.
Not all FortiGuard services are supported by these proxy settings. For example, web filter
service traffic to FortiGuard will not be directed to the configured proxy.
To configure a proxy server and communicate with FortiGate Cloud though it:
1. Configure FortiGate B as a proxy server:
config firewall proxy-policy
edit 1
set proxy explicit-web
set dstintf "wan1"
set srcaddr "all"
set dstaddr "all"
set service "webproxy"
FortiOS 6.4.2 Administration Guide 917
Fortinet Inc.
Policy and Objects
set action accept
set schedule "always"
set logtraffic all
set users "guest1"
next
end
config user local
edit "guest1"
set type password
set passwd 123456
next
end
config authentication scheme
edit "local-basic"
set method basic
set user-database "local-user-db"
next
end
config authentication rule
edit "local-basic-rule"
set srcaddr "all"
set ip-based disable
set active-auth-method "local-basic"
next
end
2. Configure a firewall policy on FortiGate B to allow FortiGate A to get DNS resolution:
config firewall policy
edit 1
set name "dns"
set srcintf "port18"
set dstintf "wan1"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "DNS"
set fsso disable
set nat enable
next
end
3. Configure the FortiGuard proxy settings on FortiGate A:
config system fortiguard
set proxy-server-ip 10.2.2.2
set proxy-server-port 8080
set proxy-username "guest1"
set proxy-password 123456
end
4. On FortiGate A, log in to FortiGate Cloud to activate the logging service:
execute fortiguard-log login <username> <password>
5. On FortiGate A, view the forticldd debug message to see the connection to the log controller through the proxy
server:
FortiOS 6.4.2 Administration Guide 918
Fortinet Inc.
Policy and Objects
# diagnose test application forticldd 1
No session timeout
To allow clients to permanently connect with legacy medical applications and systems that do not have keepalive or
auto-reconnect features, the session timeout can be set to never for firewall services, policies, and VDOMs.
The options to disable session timeout are hidden in the CLI.
To set the session TTL value of a custom service to never:
config firewall service custom
edit "tcp_23"
set tcp-portrange 23
set session-ttl never
next
end
To set the session TTL value of a policy to never:
config firewall policy
edit 201
set srcintf "wan1"
set dstintf "wan2"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "TCP_8080"
set logtraffic disable
set session-ttl never
set nat enable
next
end
To set the session TTL value of a VDOM to never:
config system session-ttl
set default never
config port
edit 1
set protocol 6
set timeout never
set start-port 8080
set end-port 8080
next
end
end
To view a session list with the timeout set to never:
# diagnose sys session list
session info: proto=6 proto_state=01 duration=9 expire=never timeout=never flags=00000000
FortiOS 6.4.2 Administration Guide 919
Fortinet Inc.
Policy and Objects
sockflag=00000000 sockport=0 av_idx=0 use=3
origin-shaper=
reply-shaper=
per_ip_shaper=
class_id=0 ha_id=0 policy_dir=0 tunnel=/ vlan_cos=0/255
state=log may_dirty f00
statistic(bytes/packets/allow_err): org=2290/42/1 reply=2895/34/1 tuples=2
tx speed(Bps/kbps): 238/1 rx speed(Bps/kbps): 301/2
orgin->sink: org pre->post, reply pre->post dev=18->17/17->18 gwy=172.16.200.55/10.1.100.41
hook=post dir=org act=snat 10.1.100.41:34256->172.16.200.55:23(172.16.200.10:34256)
hook=pre dir=reply act=dnat 172.16.200.55:23->172.16.200.10:34256(10.1.100.41:34256)
pos/(before,after) 0/(0,0), 0/(0,0)
misc=0 policy_id=9 auth_info=0 chk_client_info=0 vd=1
serial=00000b27 tos=ff/ff app_list=0 app=0 url_cat=0
sdwan_mbr_seq=0 sdwan_service_id=0
rpdb_link_id = 00000000 ngfwid=n/a
dd_type=0 dd_mode=0
npu_state=0x000001 no_offload
no_ofld_reason: disabled-by-policy
total session 1
MAP-E support
On a customer edge (CE) FortiGate, an IPv4-over-IPv6 (MAP-E) tunnel can be created between the FortiGate and the
border relay (BR) operating in an IPv6 network. A tunnel interface is created between the FortiGate and BR, which can
be applied to firewall policies and IPsec VPN.
To configure a MAP-E tunnel between the FortiGate and the BR:
1. Configure fixed IP mode.
a. Configure IPv6 on the interface:
config system interface
edit "wan1"
config ipv6
FortiOS 6.4.2 Administration Guide 920
Fortinet Inc.
Policy and Objects
set autoconf enable
set unique-autoconf-addr enable
set interface-identifier ::6f:6c1f:3400:0
end
next
end
The interface-identifier is an IPv6 address. Its last 64-bit will be kept and the rest will be cleared
automatically. It will combine with the IPv6 prefix it gets from the IPv6 router to generate the IPv6 address of the
interface.
By default, unique-autoconf-addr is disabled. It must be enabled so it can handle IPv6 prefix changing.
b. Configure the VNE tunnel:
config system vne-tunnel
set status enable
set interface "wan1"
set mode fixed-ip
set ipv4-address 10.10.81.81 255.255.255.0
set br 2001:160::82
set update-url "http://qa.forosqa.com/update?user=xxxx&pass=yyyy"
end
Initial sequence overview of VNE tunnel under fixed IP mode:
Once the IPv6 address of the FortiGate changes, the tunnel will be down because the BR does not know the
FortiGate's new IPv6 address. The FortiGate uses update-url to update the new IPv6 address to the provisioning
server. The provisioning server updates the FortiGate’s IPv6 address to the BR so the VNE tunnel can be re-
established.
Communication sequence overview of re-establishing VNE tunnel:
FortiOS 6.4.2 Administration Guide 921
Fortinet Inc.
Policy and Objects
2. Configure the VNE tunnel to use MAP-E mode:
config system vne-tunnel
set status enable
set interface 'wan1'
set ssl-certificate "Fortinet_Factory"
set bmr-hostname ********
set auto-asic-offload enable
set mode map-e
end
Initial sequence overview of VNE tunnel under MAP-E mode:
FortiOS 6.4.2 Administration Guide 922
Fortinet Inc.
Policy and Objects
The FortiGate sends a MAP rule request to the MAP distribution server once the IPv6 address is configured on the
FortiGate by RS/RA. Next, the FortiGate will send an AAAA query to get the IPv6 address of the MAP distribution
server. After sending the BMR request to the MAP distribution server, the FortiGate will get the IPv4 address, port
set, BR IPv6 address, and hostname of the address resolution server from the BMR reply. The VNE tunnel between
the FortiGate and BR is now established.
The address resolution server is actually a dynamic DNS. The hostname is used for the FortiGate to maintain an
IPv6 address when it changes.
The FortiGate updates the DDNS server with its IPv6 address whenever it updates, which in turn provides the
update to the MAP distribution server and BR so they know how to resolve the FortiGate by hostname.
Once the VNE tunnel is established, a tunnel interface is created (vne.root), and an IPv4-over-IPv6 tunnel is set
up between the FortiGate and BR. The route, firewall policy, and DNS server can now be configured to let the traffic
go through the VNE tunnel and the and protect the end-user. The VNE tunnel can also be used in IPsec phase 1.
3. Configure the route:
config router static
edit 1
set device "vne.root"
next
end
4. Configure the firewall policy:
config firewall policy
edit 111
set name "ff"
set srcintf "port2"
set dstintf "vne.root"
FortiOS 6.4.2 Administration Guide 923
Fortinet Inc.
Policy and Objects
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set utm-status enable
set ssl-ssh-profile "certificate-inspection"
set av-profile "default"
set nat enable
next
end
5. Configure the DNS server:
config system dns-server
edit "port2"
next
end
Objects
The following topics provide information about objects:
l Address group exclusions on page 924
l MAC addressed-based policies on page 926
l ISDB well-known MAC address list on page 928
l Dynamic policy — fabric devices on page 930
l FSSO dynamic address subtype on page 932
l ClearPass integration for dynamic address objects on page 935
l Group address objects synchronized from FortiManager on page 940
l Using wildcard FQDN addresses in firewall policies on page 942
l Configure FQDN-based VIPs on page 944
l IPv6 geography-based addresses on page 945
l Array structure for address objects on page 947
l IPv6 MAC addresses and usage in firewall policies on page 949
Address group exclusions
Specific IP addresses or ranges can be subtracted from the address group with the Exclude Members setting in IPv4
address groups.
This feature is only supported for IPv4 address groups, and only for addresses with a Type of
IP Range or Subnet.
FortiOS 6.4.2 Administration Guide 924
Fortinet Inc.
Policy and Objects
To exclude addresses from an address group using the GUI:
1. Go to Policy & Objects > Addresses.
2. Create a new address group, or edit an existing address group.
3. Enable Exclude Members. The Select Entries pane opens.
4. Select the addresses you want to exclude from the group.
5. Click OK.
The excluded members are listed in the Exclude Members column.
To exclude addresses from an address group using the CLI:
config firewall addrgrp
FortiOS 6.4.2 Administration Guide 925
Fortinet Inc.
Policy and Objects
edit <address group>
set exclude enable
set exclude-member <address> <address> ... <address>
next
end
MAC addressed-based policies
MAC address ranges can be added to the following IPv4 policies:
l Firewall
l Virtual wire pair
l ACL
l Central SNAT
l DoS
A MAC address is a link layer-based address type and it cannot be forwarded across different IP segments.
FortiOS only supports the MAC address type as source address for policies in NAT mode VDOM. When you use the
MAC address type in a policy as source address in NAT mode VDOM, IP address translation (NAT) is still performed
according to the rules defined in the policy. The MAC address type only works for source address matching. It does not
have any association with NAT actions.
For policies in transparent mode or the virtual wire pair interface, you can use the MAC address type as source or
destination address.
To configure a MAC address range using the GUI:
1. Go to Policy & Objects > Addresses to create or edit an address:
a. For Category, select Address.
b. For Type, select MAC Address Range.
c. Enter the address range in the empty fields.
d. Configure the other fields as needed.
e. Click OK.
FortiOS 6.4.2 Administration Guide 926
Fortinet Inc.
Policy and Objects
2. Go to Policy & Objects > Firewall Policy to apply the address type to a policy in NAT mode VDOM:
a. For Source, select the MAC address you just configured.
b. For Destination, select an address.
In NAT mode VDOM, this address type cannot be used as destination address.
c. Click OK.
To configure a MAC address range using the CLI:
1. Create a new MAC address range type:
config firewall address
edit <object_name>
set type mac
set start-mac <mac_address_start #>
set end-mac <mac_address_end #>
next
end
2. Apply the address type to a policy. In transparent mode or the virtual wire pair interface, this address type can be
mixed with other address types in the policy:
config firewall address
edit "test-mac-addr1"
set type mac
set start-mac 00:0c:29:41:98:88
set end-mac 00:0c:29:41:98:88
next
end
FortiOS 6.4.2 Administration Guide 927
Fortinet Inc.
Policy and Objects
config firewall policy
edit 1
set srcintf "port2"
set dstintf "port1"
set srcaddr "test-mac-addr1" "10-1-100-42"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set logtraffic all
set nat enable
next
end
ISDB well-known MAC address list
The Internet Service Database (ISDB) includes well-known vendor MAC address range lists. The lists can only be used
for source MAC addresses in IPv4 policies, and include the vendor name and the MAC address ranges that the vendor
belongs to.
To view the vendor list:
# diagnose vendor-mac id
Please input Vendor MAC ID.
ID: 1 name: "Asus"
ID: 2 name: "Acer"
ID: 3 name: "Amazon"
ID: 4 name: "Apple"
ID: 5 name: "Xiaomi"
ID: 6 name: "BlackBerry"
ID: 7 name: "Canon"
ID: 8 name: "Cisco"
ID: 9 name: "Linksys"
ID: 10 name: "D-Link"
ID: 11 name: "Dell"
ID: 12 name: "Ericsson"
ID: 13 name: "LG"
ID: 14 name: "Fujitsu"
ID: 15 name: "Fitbit"
ID: 16 name: "Fortinet"
ID: 17 name: "OPPO"
ID: 18 name: "Hitachi"
ID: 19 name: "HTC"
ID: 20 name: "Huawei"
ID: 21 name: "HP"
ID: 22 name: "IBM"
ID: 23 name: "Juniper"
ID: 24 name: "Lenovo"
ID: 25 name: "Microsoft"
ID: 26 name: "Motorola"
ID: 27 name: "Netgear"
ID: 28 name: "Nokia"
ID: 29 name: "Nintendo"
ID: 30 name: "PaloAltoNetworks"
FortiOS 6.4.2 Administration Guide 928
Fortinet Inc.
Policy and Objects
ID: 31 name: "Polycom"
ID: 32 name: "Samsung"
ID: 33 name: "Sharp"
ID: 34 name: "Sony"
ID: 35 name: "Toshiba"
ID: 36 name: "VMware"
ID: 37 name: "Vivo"
ID: 38 name: "Zyxel"
ID: 39 name: "ZTE"
To view the MAC address ranges for a vendor:
# diagnose vendor-mac id 16
Vendor MAC: 16(Fortinet)
Version: 0000700021
Timestamp: 201908081432
Number of MAC ranges: 6
00:09:0f:00:00:00 - 00:09:0f:ff:ff:ff
04:d5:90:00:00:00 - 04:d5:90:ff:ff:ff
08:5b:0e:00:00:00 - 08:5b:0e:ff:ff:ff
70:4c:a5:00:00:00 - 70:4c:a5:ff:ff:ff
90:6c:ac:00:00:00 - 90:6c:ac:ff:ff:ff
e8:1c:ba:00:00:00 - e8:1c:ba:ff:ff:ff
To query the vendor of a specific MAC address or range:
# diagnose vendor-mac match 00:09:0f:ff:ff:ff 48
Vendor MAC: 16(Fortinet), matched num: 1
To use the vendor ID in a firewall policy:
config firewall policy
edit 9
set name "policy_id_9"
set uuid 6150cf30-308d-51e9-a7a3-bcbd05d61f93
set srcintf "wan2"
set dstintf "wan1"
set srcaddr "all"
set dstaddr "all"
set vendor-mac 36 16
set action accept
set schedule "always"
set service "ALL"
set logtraffic all
set auto-asic-offload disable
set nat enable
next
end
Only packets whose source MAC address belong to Fortinet or VMware are passed by the policy.
FortiOS 6.4.2 Administration Guide 929
Fortinet Inc.
Policy and Objects
Dynamic policy — fabric devices
The dynamic address group represents the configured IP addresses of all Fortinet devices connected to the Security
Fabric. It currently includes FortiManager, FortiAnalyzer, FortiClient EMS, FortiMail, FortiAP(s), and FortiSwitch(es).
Like other dynamic address groups for fabric connectors, it can be used as an IPv4 address in firewall policies and
objects.
The list of firewall addresses includes a default address object called FABRIC_DEVICE. You can apply the FABRIC_
DEVICE object to the following types of policies:
l Firewall policy (including virtual wire pairs)
l IPv4 shaping policy
l IPv4 ACL policy
l policy64 and policy46 (IPv4 only)
You cannot apply the FABRIC_DEVICE object to the following types of policies:
l IPv4 explicit proxy policy
You also cannot use the FABRIC_DEVICE object with the following settings:
l Custom extension on internet-service
l Exclusion of addrgrp
Initially the FABRIC_DEVICE object does not have an address value. The address value is populated dynamically as
things change. As a result, you cannot edit the FABRIC_DEVICE object, add any addresses to the object, or remove any
addresses from the object. The Edit Address pane in the GUI only has a Return button because the object is read-only:
The FABRIC_DEVICE object address values are populated based on:
l FortiAnalyzer IP (from the Fabric Settings pane)
l FortiManager IP (from the Fabric Settings pane)
l FortiMail IP (from the Fabric Settings pane)
l FortiClient EMS IP (from the Fabric Settings pane)
l FortiAP IPs (from the FortiAP Setup pane or DHCP)
l FortiSwitch IPs (from the FortiSwitch Setup page or DHCP)
To apply the FABRIC_DEVICE object to a firewall policy using the GUI:
1. Go to Policy & Objects > Firewall Policy.
2. Create a new policy or edit an existing policy.
FortiOS 6.4.2 Administration Guide 930
Fortinet Inc.
Policy and Objects
3. For the Destination field, select FABRIC_DEVICE from the list of address entries.
4. Configure the rest of the policy as needed.
5. Click OK.
To apply the FABRIC_DEVICE object to a firewall policy using the CLI:
config firewall address
edit "FABRIC_DEVICE"
set type ipmask
set comment "IPv4 addresses of Fabric Devices."
set visibility enable
set associated-interface ''
set color 0
set allow-routing disable
set subnet 0.0.0.0 0.0.0.0
next
end
config firewall policy
edit 1
set srcintf "port2"
set dstintf "port1"
set srcaddr "all"
set dstaddr "FABRIC_DEVICE"
set action accept
set schedule "always"
set service "ALL"
set utm-status enable
set fsso disable
set nat enable
next
end
Diagnose command
You can use the diagnose command to list IP addresses of Fortinet devices that are configured in the Security Fabric.
To run the diagnose command using the CLI:
(root) # diagnose firewall sf-addresses list
FabricDevices: 172.18.64.48
FortiAnalyzer: 172.18.60.25
FortiSandbox: 172.18.52.154
FortiManager: 172.18.28.31
FortiOS 6.4.2 Administration Guide 931
Fortinet Inc.
Policy and Objects
FortiClientEMS: 172.18.62.6
FortiAP:
FortiSwitch:
FortiAP/SW-DHCP:
FSSO dynamic address subtype
The Fortinet Single Sign-ON (FSSO) dynamic firewall address subtype can be used in policies that support dynamic
address types. The FortiGate will update the dynamic address used in firewall policies based on the source IP
information for the authenticated FSSO users.
It can also be used with FSSO group information that is forwarded by ClearPass Policy Manager (CPPM) via
FortiManager, and other FSSO groups provided by the FSSO collector agent or FortiNAC.
To configure FSSO dynamic addresses with CPPM and FortiManager in the GUI:
1. Create the dynamic address object:
a. Go to Policy & Objects > Addresses, and click Create New > Address.
b. For Type, select Dynamic.
c. For Sub Type, select Fortinet Single Sign-On (FSSO). The Select Entries pane opens and displays all available
FSSO groups.
d. Select one or more groups.
e. Click OK to save the configuration.
In the address table, there will be an error message for the address you just created (Unresolved dynamic
address: fsso). This is expected because there are currently no authenticated FSSO users (based on source
IP) in the local FSSO user list.
2. Add the dynamic address object to a firewall policy:
a. Go to Policy & Objects > Firewall Policy.
b. Create a new policy or edit an existing policy.
c. For Source, add the dynamic FSSO address object you just created.
d. Configure the rest of the policy as needed.
FortiOS 6.4.2 Administration Guide 932
Fortinet Inc.
Policy and Objects
e. Click OK to save your changes.
3. Test the authentication to add a source IP address to the FSSO user list:
a. Log in as user and use CPPM for user authentication to connect to an external web server. After successful
authentication, CPPM forwards the user name, source IP address, and group membership to the FortiGate via
FortiManager.
b. Go to Monitor > Firewall User Monitor to view the user name (fsso1) and IP address.
c. Go to Policy & Objects > Addresses to view the updated address table. The error message no longer appears.
d. Hover over the dynamic FSSO address to view the IP address (fsso resolves to: 10.1.100.185).
To verify user traffic in the GUI:
1. Go to Log & Report > Forward Traffic.
Details for the user fsso1 are visible in the traffic log:
FortiOS 6.4.2 Administration Guide 933
Fortinet Inc.
Policy and Objects
l If another user is authenticated by CPPM, then the dynamic address fsso entry in the address table will be
updated. The IP address for user fsso2 (10.1.100.188) is now visible:
2. Go to FortiView > Sources to verify that the users were able to successfully pass the firewall policy.
If a user logs off and CPPM receives log off confirmation, then CPPS updates the FortiGate
FSSO user list via FortiManager. The user IP address is deleted from the dynamic FSSO
address, and the user is no longer be able to pass the firewall policy.
To configure FSSO dynamic addresses with CPPM and FortiManager in the CLI:
1. Create the dynamic address object:
config firewall address
edit "fsso"
set type dynamic
set sub-type fsso
set fsso-group "cp_test_FSSOROLE"
next
end
2. Add the dynamic address object to a policy:
config firewall policy
edit 1
set name "pol1"
FortiOS 6.4.2 Administration Guide 934
Fortinet Inc.
Policy and Objects
set srcintf "port2"
set dstintf "port3"
set srcaddr "fsso"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set logtraffic all
set fsso disable
set nat enable
next
end
To verify user traffic in the CLI:
1. Check the FSSO user list:
diagnose debug authd fsso list
----FSSO logons----
IP: 10.1.100.185 User: fsso1 Groups: cp_test_FSSOROLE Workstation: MemberOf: FSSO-
CPPM cp_test_FSSOROLE
Total number of logons listed: 1, filtered: 0
----end of FSSO logons----
2. Check the authenticated firewall users list:
diagnose firewall auth list
10.1.100.185, fsso1
type: fsso, id: 0, duration: 2928, idled: 2928
server: FortiManager
packets: in 0 out 0, bytes: in 0 out 0
group_id: 2 33554433
group_name: FSSO-CPPM cp_test_FSSOROLE
----- 1 listed, 0 filtered ------
After user traffic passes through the firewall, the nu
diagnose firewall auth list
10.1.100.185, fsso1
type: fsso, id: 0, duration: 3802, idled: 143
server: FortiManager
packets: in 1629 out 1817, bytes: in 2203319 out 133312
group_id: 2 33554433
group_name: FSSO-CPPM cp_test_FSSOROLE
----- 1 listed, 0 filtered ------
ClearPass integration for dynamic address objects
ClearPass Policy Manager (CPPM) can gather information about the statuses of network hosts, for example, the latest
patches or virus infections. Based on this information, CPPM send the IP addresses and current states, such as Healthy
or Infected, to the FortiGate.
On the FortiGate, the IP addresses received from CPPM are added to a dynamic firewall address with the clearpass-spt
subtype. This address can be used in any policy that supports dynamic addresses, such as Firewall or SSL-VPN
policies.
FortiOS 6.4.2 Administration Guide 935
Fortinet Inc.
Policy and Objects
In this example, you create two dynamic IP addresses that are used in two firewall policies (deny and allow). One policy
allows traffic (host state = Healthy), and the other denies traffic (host state = Infected). When CPPM sends the
information, the IP addresses are assigned according to their host state: Healthy or Infected.
You can then verify that traffic from the Infected host is denied access by the deny policy, and traffic from the Healthy
host is allowed access by the allow policy.
Create a REST API administrator
A RESET API administrator is required to generate an authorization token for REST API messages, and to limit hosts
that can send REST API messages to the FortiGate.
To create a REST API administrator in the GUI:
1. Go to System > Administrators.
2. Click Create New > REST API Admin.
3. Configure the Username and other information as needed.
4. Disable PKI Group.
5. In the Trusted Hosts field, enter 10.1.100.0/24.
For this example, an administrator profile called clearpass was created with full read/write access. See
Administrator profiles on page 704 for details.
6. Click OK.
The New API key pane opens.
The API key is the REST API authorization token that is used in REST API messages sent by CPPM to the
FortiGate.
7. Copy the API key to a secure location. A new key can be generated if this one is lost or compromised.
8. Click Close.
FortiOS 6.4.2 Administration Guide 936
Fortinet Inc.
Policy and Objects
To create a REST API administrator in the CLI:
config system api-user
edit "cpi-back"
set accprofile "clearpass"
config trusthost
edit 1
set ipv4-trusthost 10.1.100.0 255.255.255.0
next
end
next
end
execute api-user generate-key cp-api
New API key: 0f1HxGHh9r9p74k7qgfHNH40p51bjs
NOTE: The bearer of this API key will be granted all access privileges assigned to the
api-user cp-api.
Create dynamic IP addresses with the clearpass subtype
Two dynamic IP addresses are required, one for the allow policy, and the other for the deny policy.
To create the dynamic IP addresses:
config firewall address
edit "cppm"
set type dynamic
set sub-type clearpass-spt
set clearpass-spt healthy
set comment ''
set visibility enable
set associated-interface ''
set color 0
next
edit "cppm-deny"
set type dynamic
set sub-type clearpass-spt
set clearpass-spt infected
set comment ''
set visibility enable
set associated-interface ''
set color 0
next
end
Create firewall policies
Two firewall policies are required, one to accept traffic (cppm-allow), and the other to deny traffic (cppm-deny).
FortiOS 6.4.2 Administration Guide 937
Fortinet Inc.
Policy and Objects
To create the firewall policies in the GUI:
1. Go to Policy & Objects > Firewall Policy.
2. Configure the allow policy:
a. Click Create New.
b. Enter a name for the policy.
c. Set Source set to cppm.
d. Set Action to ACCEPT.
e. Configure the remaining settings as needed.
f. Click OK.
3. Configure the deny policy:
a. Click Create New.
b. Enter a name for the policy.
c. Set Source set to cppm-deny.
d. Set Action to DENY.
FortiOS 6.4.2 Administration Guide 938
Fortinet Inc.
Policy and Objects
e. Configure the remaining settings as needed.
f. Click OK.
To create the firewall policies in the CLI:
config firewall address
edit "cppm"
set type dynamic
set sub-type clearpass-spt
set clearpass-spt healthy
set comment ''
set visibility enable
set associated-interface ''
set color 0
next
edit "cppm-deny"
set type dynamic
set sub-type clearpass-spt
set clearpass-spt infected
set comment ''
set visibility enable
set associated-interface ''
set color 0
next
end
Verification
Go to Log & Report > Forward Traffic to review traffic logs and ensure that traffic is allowed or denied as expected.
To verify that FortiGate addresses are assigned correctly, enter the following CLI command:
diagnose firewall dynamic list
List all dynamic addresses:
cppm-deny: ID(141)
ADDR(10.1.100.188)
FortiOS 6.4.2 Administration Guide 939
Fortinet Inc.
Policy and Objects
cppm: ID(176)
ADDR(10.1.100.185)
ADDR(10.1.100.186)
Group address objects synchronized from FortiManager
Address objects from external connectors that are learned by FortiManager are synchronized to FortiGate. These
objects can be grouped together with the FortiGate CLI to simplify selecting connector objects in the FortiGate GUI.
Multiple groups can be created.
This option is only available for objects that are synchronized from FortiManager.
To add an object to a connector group:
config user adgrp
edit <object_name>
set server-name "FortiManager"
set connector-source <group_name>
next
end
Example
In this example, objects learned by the FortiManager from an Aruba ClearPass device are synchronized to the FortiGate.
Some of the objects are then added to a group called ClearPass to make them easier to find in the object list when
creating a firewall policy.
Prior to being grouped, the synchronized objects are listed under the FortiManager heading in the object lists.
FortiOS 6.4.2 Administration Guide 940
Fortinet Inc.
Policy and Objects
To add some of the objects to a group:
config user adgrp
edit "cp_test_FSSOROLE"
set server-name "FortiManager"
set connector-source "ClearPass"
next
edit "cp_test_[AirGroup v2]"
set server-name "FortiManager"
set connector-source "ClearPass"
next
end
The objects are now listed under the ClearPass heading.
FortiOS 6.4.2 Administration Guide 941
Fortinet Inc.
Policy and Objects
Using wildcard FQDN addresses in firewall policies
You can use wildcard FQDN addresses in firewall policies.
The firewall policy types that support wildcard FQDN addresses include IPv4, IPv6, ACL, local, shaping, NAT64, NAT46,
and NGFW.
For wildcard FQDN addresses to work, the FortiGate should allow DNS traffic to pass through. Clients behind the
FortiGate should use the same DNS server(s) as the FortiGate to ensure the FortiGate and the clients are resolving to
the same addresses.
Initially, the wildcard FQDN object is empty and contains no addresses. When the client tries to resolve a FQDN
address, the FortiGate will analyze the DNS response. The IP address(es) contained in the answer section of the DNS
response will be added to the corresponding wildcard FQDN object.
Since FortiGate must analyze the DNS response, it does not work with DNS over HTTPS.
When the wildcard FQDN gets the resolved IP addresses, FortiOS loads the addresses into the firewall policy for traffic
matching.
The FortiGate will keep the IP addresses in the FQDN object table as long as the DNS entry itself has not expired. Once
it expires, the IP address is removed from the wildcard FQDN object until another query is made. At any given time, a
single wildcard FQDN object may have up to 1000 IP addresses.
The DNS expiry TTL value is set by the authoritative name server for that DNS record. If the
TTL for a specific DNS record is very short and you would like to cache the IP address longer,
then you can extend it with the CLI. See To extend the TTL for a DNS record in the CLI: on
page 944
For more information, see FQDN address firewall object type.
To create a wildcard FQDN using the GUI:
1. Go to Policy & Objects > Addresses and click Create New > Address.
2. Specify a Name.
3. For Type, select FQDN.
4. For FQDN, enter a wildcard FQDN address, for example, *.fortinet.com.
5. Click OK.
FortiOS 6.4.2 Administration Guide 942
Fortinet Inc.
Policy and Objects
To use a wildcard FQDN in a firewall policy using the GUI:
1. Go to Policy & Objects > Firewall Policy and click Create New.
2. For Destination, select the wildcard FQDN.
3. Configure the rest of the policy as needed.
4. Click OK.
In this example, policy ID 2 uses the wildcard FQDN:
To create a wildcard FQDN using the CLI:
config firewall address
edit "test-wildcardfqdn-1"
set type fqdn
set fqdn "*.fortinet.com"
next
end
To use wildcard FQDN in a firewall policy using the CLI:
config firewall policy
edit 2
set srcintf "port3"
set dstintf "port1"
set srcaddr "all"
set dstaddr "test-wildcardfqdn-1"
set action accept
set schedule "always"
set service "ALL"
set auto-asic-offload disable
set nat enable
next
end
To use the diagnose command to list resolved IP addresses of wildcard FQDN objects:
# diagnose firewall fqdn list
List all FQDN:
*.fortinet.com: ID(48) ADDR(96.45.36.159) ADDR(192.168.100.161) ADDR(65.39.139.161)
Alternatively:
diagnose test application dnsproxy 6
worker idx: 0
vfid=0 name=*.fortinet.com ver=IPv4 min_ttl=3266:0, cache_ttl=0 , slot=-1, num=3,
wildcard=1
FortiOS 6.4.2 Administration Guide 943
Fortinet Inc.
Policy and Objects
96.45.36.159 (ttl=68862:68311:68311) 192.168.100.161 (ttl=3600:3146:3146)
65.39.139.161
(ttl=3600:3481:3481)
To use the diagnose command for firewall policies which use wildcard FQDN:
# diagnose firewall iprope list 100004
...
destination fqdn or dynamic address (1):*.fortinet.com ID(48) uuid_idx=57 ADDR
(208.91.114.104) ADDR(208.91.114.142) ADDR(173.243.137.143) ADDR(65.104.9.196) ADDR
(96.45.36.210)
...
To extend the TTL for a DNS record in the CLI:
In this the example the set cache-ttl value has been extended to 3600 seconds.
config firewall address
edit "fortinet.com"
set type fqdn
set fqdn "www.fortinet.com”
set cache-ttl 3600
next
end
Configure FQDN-based VIPs
In public cloud environments, sometimes it is necessary to map a VIP to an FQDN address.
To configure an FQDN-based VIP in the GUI:
1. Go to Policy & Objects > Virtual IPs and click Create New > Virtual IP.
2. Enter a name for the VIP.
3. Select an interface.
4. For Type, select FQDN.
5. Enter the external IP address.
FortiOS 6.4.2 Administration Guide 944
Fortinet Inc.
Policy and Objects
6. For Mapped address, select an FQDN address.
7. Click OK.
In the virtual IP list, hover over the address to view more information.
To configure an FQDN-based VIP in the CLI:
config firewall vip
edit "FQDN-vip-1"
set type fqdn
set extip 10.2.2.199
set extintf "any"
set mapped-addr "destination"
next
end
IPv6 geography-based addresses
Geography-based IPv6 addresses can be created and applied to IPv6 firewall policies.
IPv6 geography-based addresses do not support geoip-override or geoip-anycast.
FortiOS 6.4.2 Administration Guide 945
Fortinet Inc.
Policy and Objects
To create an IPv6 geography-based address in the GUI:
1. Go to Policy and Objects > Addresses.
2. Click Create New > Address.
3. Set Category to IPv6 Address.
4. Enter a name for the address.
5. Set Type to IPv6 Geography.
6. Select the Country/Region from the list.
7. Optionally, enter comments.
8. Click OK.
To use the IPv6 geography address in a policy:
1. Go to Policy & Objects > Firewall Policy.
2. Edit an existing policy, or create a new one, using the IPv6 geography address as the Source or Destination
Address.
FortiOS 6.4.2 Administration Guide 946
Fortinet Inc.
Policy and Objects
3. In the policy list, hover over the address to view details.
To configure an IPv6 geography-based address in the CLI:
1. Create an IPv6 geography-based address:
config firewall address6
edit "test-ipv6-geoip"
set type geography
set color 6
set comment "IPv6 Geography address"
set country "CA"
next
end
2. Use the IPv6 geography-based address in a policy:
config firewall policy
edit 1
set name "test-policy6-1"
set srcintf "wan2"
set dstintf "wan1"
set srcaddr6 "all"
set dstaddr6 "test-ipv6-geoip"
set action accept
set schedule "always"
set service "ALL"
set nat enable
next
end
Array structure for address objects
Some address objects logically belong to the same device, such as two IPs from the same computer. These address
objects can be grouped into an address folder, which is an exclusive list of address objects that do not appear in other
address groups or folders.
In the CLI, the folder type can be set after the member list is already populated. If the member list contains an
incompatible entry, then the setting will be discarded when the next/end command is issued. If the folder type is set
before the member list is populated, then the possible member entry list will be filtered according to the selected type.
FortiOS 6.4.2 Administration Guide 947
Fortinet Inc.
Policy and Objects
To create an address folder in the GUI:
1. Go to Policy & Objects > Addresses.
2. Click Create New > Address Group and enter a name.
3. For Type, select Folder.
4. For Members, click the + to add the addresses. Address folders and groups are exclusive, so the Select Entries
window filters out address objects that are a member of an existing group or folder.
5. Click OK.
6. In the address table, expand the Address Group section to view the folder (dev1-addr-comb). The expandable
folder view shows the address folder's child objects:
To configure an address folder in the CLI:
notes
config firewall addrgrp
edit "safe-network1-devices"
set type folder
set member "dev1-addr-comb" "dev2-addr-comb"
set comment ''
set exclude disable
set color 13
next
end
config firewall addrgrp
edit "dev1-addr-comb"
set type folder
FortiOS 6.4.2 Administration Guide 948
Fortinet Inc.
Policy and Objects
set member "dev1-IP-nic1" "dev1-IP-nic2" "dev1-mac"
set comment ''
set exclude disable
set color 18
next
end
config firewall addrgrp
edit "dev2-addr-comb"
set type folder
set member "dev2-IP-nic1" "dev2-IP-nic2" "dev2-IP-nic3" "dev2-mac"
set comment ''
set exclude disable
set color 5
next
end
IPv6 MAC addresses and usage in firewall policies
Users can define IPv6 MAC addresses that can be applied to the following policies:
l Firewall
l Virtual wire pair
l ACL/DoS
l Central NAT
l NAT64
l Local-in
In this example, a firewall policy is configured in a NAT mode VDOM with the IPv6 MAC address range as a source
address.
IPv6 MAC addresses cannot be used as destination addresses in VDOMs when in NAT
operation mode.
To configure IPv6 MAC addresses in a policy in the GUI:
1. Create the MAC address range:
a. Go to Policy & Objects > Addresses and click Create New > Address.
b. For Category, click IPv6 Address.
c. Enter an address name.
d. For Type, select Device (MAC Address).
e. For MAC Address Scope, click Range.
f. Enter the Starting and Ending MAC addresses.
FortiOS 6.4.2 Administration Guide 949
Fortinet Inc.
Policy and Objects
g. Click OK.
2. Configure the policy:
a. Go to Policy & Objects > Firewall Policy and click Create New.
b. For Source, select the IPv6 MAC address object.
c. Configure the other settings as needed.
d. Click OK.
To configure IPv6 MAC addresses in a policy in the CLI:
1. Create the MAC address range:
config firewall address6
edit "test-ipv6-mac-addr-1"
set type mac
set start-mac 00:0c:29:b5:92:8d
set end-mac 00:0c:29:b5:92:8d
next
end
2. Configure the policy:
config firewall policy
edit 2
FortiOS 6.4.2 Administration Guide 950
Fortinet Inc.
Policy and Objects
set srcintf "wan2"
set dstintf "wan1"
set srcaddr "all"
set dstaddr "all"
set srcaddr6 "test-ipv6-mac-addr-1" "2000-10-1-100-0"
set dstaddr6 "all"
set action accept
set schedule "always"
set service "ALL"
set logtraffic all
set auto-asic-offload disable
set nat enable
next
end
Traffic shaping
QoS (quality of service) is the capability to adjust quality aspects of your overall network traffic, including techniques
such as priority-based queuing and traffic policing. Because bandwidth is finite and some types of traffic are slow, jitter or
packet loss sensitive, bandwidth intensive, or critical for operations, QoS is a useful tool to optimize the performance of
various applications in your network. QoS is especially important for managing voice and streaming multimedia traffic
because these types of traffic can rapidly consume bandwidth and are sensitive to latency. You can implement QoS on
FortiGate devices using the following techniques:
Technique Description
Traffic policing The FortiGate drops packets that do not conform to the configured bandwidth
limitations.
Note that excessive traffic policing can degrade network performance rather than
improve it.
Traffic shaping The FortiGate ensures that traffic consumes bandwidth at least at the guaranteed
rate by assigning a greater priority queue to the traffic if the guaranteed rate is not
being met.
The FortiGate ensures that traffic does not consume more than the maximum
configured bandwidth. Traffic that exceeds the maximum rate is subject to traffic
policing.
Queuing The FortiGate transmits packets in the order of their assigned priority queue for
that physical interface. All traffic in a higher priority traffic queue must be
completely transmitted before traffic in lower priority queues is transmitted.
When determining how to configure QoS, it is helpful to know when a FortiGate uses each technique in the overall traffic
processing flow and the considerations for each technique. After the FortiGate accepts packets, it classifies the traffic
and may apply traffic policing at additional points during traffic processing. The FortiGate may also apply QoS
techniques, such as prioritization and traffic shaping. Traffic shaping consists of both traffic policing to enforce bandwidth
limits and adjusting priority queues to help packets achieve the guaranteed rate.
Traffic shaping accuracy is optimal for security policies without a protection profile where no FortiGate content inspection
is processed.
FortiOS 6.4.2 Administration Guide 951
Fortinet Inc.
Policy and Objects
You can enable traffic shaping in System > Feature Visibility under the Additional Features
section.
The following topics provide information about configuring traffic shaping policies:
l Determining your QoS requirements on page 952
l Packet rates on page 953
l Changing traffic shaper bandwidth unit of measurement on page 955
l Shared traffic shaper on page 955
l Per-IP traffic shaper on page 960
l Type of Service-based prioritization and policy-based traffic shaping on page 963
l Interface-based traffic shaping profile on page 966
l Interface-based traffic shaping with NP acceleration on page 974
l Classifying traffic by source interface on page 975
l Configuring traffic class IDs on page 976
l Traffic shaping schedules on page 979
l DSCP matching (shaping) on page 980
l QoS assignment and rate limiting for quarantined VLANs on page 984
l Weighted random early detection queuing on page 985
Determining your QoS requirements
Before implementing QoS, you should identify the types of traffic that:
l Are important to your organization
l Use high amounts of bandwidth
l Are sensitive to latency or packet loss
Discovering the needs and relative importance of each traffic type on your network will help you design an appropriate
overall approach, including how you configure each available QoS component technique. Some organizations discover
they only need to configure bandwidth limits for some services. Other organizations determine they need to fully
configure interface and security policy bandwidth limits for all services, and prioritize the queuing of critical services
relative to traffic rate.
For example, your organization wants to guarantee sufficient bandwidth for revenue-producing e-commerce traffic. You
need to ensure that customers complete transactions and do not experience service delays. At the same time, you need
to ensure low latency for voice over IP (VoIP) traffic that sales and customer support teams use, while traffic latency and
bursts may be less critical to the success of other network applications, such as long term, resumable file transfers.
Best practices
The following list includes recommendations and considerations when configuring QoS in your network:
l Ensure maximum bandwidth limits at the source interface and security policy are not too low. This can cause the
FortiGate to discard an excessive number of packets.
l Consider the ratios of how packets are distributed between the available queues, and which queues are used by
which types of services. Assigning most packets to the same priority queue can reduce the effects of configuring
prioritization. Assigning a lot of high bandwidth services to high priority queues may take too much bandwidth away
FortiOS 6.4.2 Administration Guide 952
Fortinet Inc.
Policy and Objects
from lower priority queues and cause increased or indefinite latency. For example, you may want to prioritize a
latency-sensitive service, such as SIP, over a bandwidth-intensive service, such as FTP. Also consider that
bandwidth guarantees can affect queue distribution, and assign packets to queue 0 instead of their regular queue in
high-volume situations.
l Decide whether or not to guarantee bandwidth because it causes the FortiGate to assign packets to queue 0 if the
guaranteed packet rate is not being met. When you compare queuing behavior for low and high bandwidth
situations, this means the effect of prioritization only becomes visible as traffic volumes rise and exceed their
guarantees. Because of this, you might want only some services to use bandwidth guarantees. This way, you can
avoid the possibility that all traffic uses the same queue in high-volume situations, which negates the effects of
configuring prioritization.
l Configure prioritization for all through traffic by either ToS (type of service)-based priority or security policy priority,
not both, to simplify analysis and troubleshooting. Traffic subject to both ToS-based and security policy priorities
use a combined priority from both parts of the configuration. Traffic subject to only one of the prioritization methods
will use only that priority. If you configure both methods, or if you configure either method for only a subset of traffic,
packets that apply to the combined configuration may receive a lower priority queue than packets that apply to only
one of the priority methods, as well as packets that do not apply to the configured prioritization. For example, if both
the ToS-based priority and security policy priority dictate that a packet should receive a medium priority, in the
absence of bandwidth guarantees, a packet will use queue 3. If only ToS-based priority is configured, the packet will
use queue 1. If only security policy priority is configured, the packet will use queue 2. If no prioritization is
configured, the packet will use queue 0.
l Because you can configure QoS using a combination of security policies and ToS-based priorities, and to
distribute traffic over the six possible queues for each physical interface, the results of those configurations can
be more difficult to analyze because of their complexity. In those cases, prioritization behavior can vary by
several factors, including: traffic volume, ToS or differentiated services (DiffServ) markings, and correlation of
session to a security policy.
The FortiGate does not prioritize traffic based on the differentiated services code point
(DSCP) marking configured in the security policy. However, ToS-based prioritization
can be used for ingress traffic.
l Use the UDP protocol to obtain more accurate testing results. Packets that are discarded by traffic shapers impact
flow-control mechanisms, such as TCP.
l Do not oversubscribe outbandwidth throughput. For example, sum [guaranteed bandwidth] < outbandwidth. For
accurate bandwidth calculations, you must set the outbandwidth parameter on interfaces.
Packet rates
The formula for packet rates specified for maximum bandwidth or guaranteed bandwidth is:
rate = amount / time
where rate is in Kbps
Burst size cannot exceed the configured maximum bandwidth. The FortiGate drops packets that exceed the configured
maximum bandwidth. Packets deduct from the amount of bandwidth available to subsequent packets, and available
bandwidth regenerates at a fixed rate. As a result, the available bandwidth for a packet may be less than the configured
rate, down to a minimum of 0 Kbps.
Alternatively, rate calculation and behavior can be described using the token bucket metaphor. A traffic flow has an
associated bucket, which represents burst size bounds and is the size of the configured bandwidth limit. The bucket
receives tokens, which represent available bandwidth at the fixed configured rate. As time passes, tokens are added to
the bucket up to capacity, and excess tokens are discarded. When a packet arrives at the FortiGate, the packet must
FortiOS 6.4.2 Administration Guide 953
Fortinet Inc.
Policy and Objects
deduct bandwidth tokens from the bucket equal to its size in order to leave the FortiGate. If there are not enough tokens,
the packet cannot leave the FortiGate and is dropped.
Bursts are not redistributed over a longer interval, so bursts are propagated rather than smoothed. However, peak size is
limited. The maximum burst size is the capacity of the bucket, which is the configured bandwidth limit. The actual size
varies depending on the current number of tokens in the bucket, which may be less than the capacity of the bucket due to
deductions made by previous packets and the fixed rate at which tokens accumulate. A depleted bucket refills at the rate
of the configured bandwidth limit. Bursts cannot borrow tokens from other time intervals.
By limiting traffic peaks and token regeneration, the available bandwidth may be less than the capacity of the bucket, but
the limit of the total amount per time interval is ensured. Total bandwidth use during each interval of one second is, at
most, the integral of the configured rate.
Rate discrepancy
You may observe that external clients, such as FTP or BitTorrent, initially report rates between the maximum bandwidth
and twice the amount of the maximum bandwidth depending on the size of their initial burst. For example, when a
connection is initiated following a period of no network activity. The apparent discrepancy in rates is caused by a
difference in perspective when delimiting time intervals. A burst from the client may initially consume all tokens in the
bucket, and before the end of one second as the bucket regenerates, is allowed to consume almost another bucket
worth of bandwidth. From the perspective of the client, this equals one time interval. However, from the perspective of
the FortiGate, the bucket cannot accumulate tokens when it is full. Therefore, the time interval for token regeneration
begins after the initial burst and does not contain the burst. These different points of reference result in an initial
discrepancy equal to the size of the burst. The client's rate contains it, but the FortiGate's rate does not. However, if the
connection is sustained to its limit and time progresses over an increasing number of intervals, this discrepancy
decreases in importance relative to the bandwidth total. The client reported rate will eventually approach the configured
rate limit for the FortiGate.
Example
The maximum bandwidth is 50 Kbps, there has been no network activity for one or more seconds, and the bucket is full.
A burst from an FTP client immediately consumes 50 kilobits. Because the bucket completely regenerates over one
second, by the time another second elapses from the initial burst, traffic can consume another 49.999 kilobits, for a total
of 99.999 kilobits between the two points in time. From the vantage point of an external FTP client regulated by this
bandwidth limit, it initially appears that the bandwidth limit is 99.999 Kbps. This is almost twice the configured limit of 50
Kbps. However, bucket capacity only regenerates at the configured rate of 50 Kbps, and the connection can only
consume a maximum of 50 kilobits during each subsequent second. The result is that as bandwidth consumption is
averaged over an increasing number of time intervals, each of which are limited to 50 Kbps, the effect of the first
interval's doubled bandwidth size diminishes proportionately, and the client's reported rate eventually approaches the
configured rate limit. The following table shows the effects of a 50 Kbps limit on client reported rates:
Total size transferred (kilobits) Time (seconds) Rate reported by client
(Kbps)
99.999 (50 + 49.999) 1 99.999
149.999 2 74.999
199.999 3 66.666
249.999 4 62.499
FortiOS 6.4.2 Administration Guide 954
Fortinet Inc.
Policy and Objects
Total size transferred (kilobits) Time (seconds) Rate reported by client
(Kbps)
299.999 5 59.998
349.999 6 58.333
Guaranteed bandwidth can also be described using a token bucket metaphor. However, because this feature attempts
to achieve or exceed a rate rather than limit it, the FortiGate does not discard non-conforming packets, as it does for
maximum bandwidth. Instead, when the flow does not achieve the rate, the FortiGate increases the packet priority
queue, in an effort to increase the rate.
Guaranteed and maximum bandwidth rates apply to the bidirectional total for all sessions controlled by the security
policy. For example, an FTP connection may entail two separate connections for the data and control portion of the
session. Some packets may be reply traffic rather than initiating traffic. All packets for both connections are counted
when calculating the packet rate for comparison with the guaranteed and maximum bandwidth rate.
Changing traffic shaper bandwidth unit of measurement
Bandwidth speeds are measured in kilobits per second (Kbps), and bytes that are sent and received are measured in
megabytes (MB). In some cases, this can cause confusion depending on whether your ISP uses kilobits per second
(Kbps), kilobytes per second (KBps), megabits per second (Mbps), or gigabits per second (Gbps).
You can change the unit of measurement for traffic shapers in the CLI.
To change the bandwidth unit of measurement for a shared traffic shaper:
config firewall shaper traffic-shaper
edit <traffic_shaper_name>
set bandwidth-unit {kbps | mbps | gbps}
next
end
To change the bandwidth unit of measurement for a per-IP traffic shaper:
config firewall shaper per-ip-shaper
edit <traffic_shaper_name>
set bandwidth-unit {kbps | mbps | gbps}
next
end
Shared traffic shaper
Shared traffic shaper is used in a firewall shaping policy to indicate the priority and guaranteed and maximum bandwidth
for a specified type of traffic use.
The maximum bandwidth indicates the largest amount of traffic allowed when using the policy. You can set the maximum
bandwidth to a value between 1 and 16776000 Kbps. The GUI displays an error if any value outside this range is used. If
you want to allow unlimited bandwidth, use the CLI to enter a value of 0.
FortiOS 6.4.2 Administration Guide 955
Fortinet Inc.
Policy and Objects
The guaranteed bandwidth ensures that there is a consistent reserved bandwidth available. When setting the
guaranteed bandwidth, ensure that the value is significantly less than the interface's bandwidth capacity. Otherwise, the
interface will allow very little or no other traffic to pass through, potentially causing unwanted latency.
In a shared traffic shaper, the administrator can prioritize certain traffic as high, medium, or low. FortiOS provides
bandwidth to low priority connections only when high priority connections do not need the bandwidth. For example, you
should assign a high traffic priority to a policy for connecting a secure web server that needs to support e-commerce
traffic. You should assign less important services a low priority.
When you configure a shared traffic shaper, you can apply bandwidth shaping per policy or for all policies. By default, a
shared traffic shaper applies traffic shaping evenly to all policies that use the shared traffic shaper.
When configuring a per-policy traffic shaper, FortiOS applies the traffic shaping rules defined for each security policy
individually. For example, if a per-policy traffic shaper is configured with a maximum bandwidth of 1000 Kbps, any
security policies that have that traffic shaper enabled get 1000 Kbps of bandwidth each.
If a traffic shaper for all policies is configured with a maximum bandwidth of 1000 Kbps, all policies share the 1000 Kbps
on a first-come, first-served basis.
The configuration is as follows:
config firewall shaper traffic-shaper
edit "traffic_shaper_name"
set per-policy enable
next
end
The shared traffic shaper selected in the traffic shaping policy affects traffic in the direction defined in the policy. For
example, if the source port is LAN and the destination is WAN1, the traffic shaping affects the flow in this direction only,
affecting the outbound traffic's upload speed. You can define the traffic shaper for the policy in the opposite direction
(reverse shaper) to affect the inbound traffic's download speed. In this example, that would be from WAN1 to LAN.
Only traffic through forward traffic shapers will be included in FortiView; reverse and per-IP shapers are not included.
The following example shows how to apply different speeds to different types of service. The example configures two
shared traffic shapers to use in two firewall shaping policies. One policy guarantees a speed of 10 Mbps for VoIP traffic.
The other policy guarantees a speed of 1 Mbps for other traffic. In the example, FortiOS communicates with a PC using
port10 and the Internet using port9.
To configure shared traffic shapers in the GUI:
1. Create a firewall policy:
a. Go to Policy & Objects > Firewall Policy and click Create New.
b. Set the Name to Internet Access.
c. Set the Incoming Interface to port10.
d. Set the Outgoing Interface to port9.
e. Set the Source and Destination to all.
f. Set the Schedule to always.
g. Set the Service to ALL.
h. Click OK.
2. Create the shared traffic shapers:
a. Go to Policy & Objects > Traffic Shapers and click Create New.
b. Set the Name to 10Mbps. This shaper is for VoIP traffic.
c. Set the Traffic Priority to High.
FortiOS 6.4.2 Administration Guide 956
Fortinet Inc.
Policy and Objects
d. Enable Max Bandwidth and enter 20000.
e. Enable Guaranteed Bandwidth and enter 10000.
f. Click OK.
g. Repeat the above steps to create another traffic shaper named 1Mbps with the Traffic Priority set to Low, the
Max Bandwidth set to 10000, and the Guaranteed Bandwidth set to 1000.
3. Create a firewall shaping policy:
a. Go to Policy & Objects > Traffic Shaping Policy and click Create New.
b. Set the Name to VoIP_10Mbps_High. This policy is for VoIP traffic.
c. Set the Source and Destination to all.
d. Set the Service to all VoIP services.
e. Set the Outgoing Interface to port9.
f. Enable Shared shaper and select 10Mbps.
g. Enable Reverse shaper and select 10Mbps.
h. Click OK.
i. Repeat the above steps to create anpther firewall shaping policy named Other_1Mbps_Low for other traffic,
with the Source and Destination set to all, Service set to ALL, Outgoing Interface set to port9, and Shared
shaper and Reverse shaper set to 1Mbps.
To configure shared traffic shapers in the CLI:
1. Create a firewall policy:
config firewall policy
edit 1
set name "Internet Access"
set srcintf "port10"
set dstintf "port9"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set fsso disable
set nat enable
next
end
2. Create the shared traffic shapers:
config firewall shaper traffic-shaper
edit "10Mbps"
set guaranteed-bandwidth 10000
set maximum-bandwidth 20000
next
edit "1Mbps"
FortiOS 6.4.2 Administration Guide 957
Fortinet Inc.
Policy and Objects
set guaranteed-bandwidth 1000
set maximum-bandwidth 10000
set priority low
next
end
3. Create a firewall shaping policy:
config firewall shaping-policy
edit 1
set name "VOIP_10Mbps_High"
set service "H323" "IRC" "MS-SQL" "MYSQL" "RTSP" "SCCP" "SIP" "SIP-MSNmessenger"
set dstintf "port9"
set traffic-shaper "10Mbps"
set traffic-shaper-reverse "10Mbps"
set srcaddr "all"
set dstaddr "all"
next
edit 2
set name "Other_1Mbps_Low"
set service "ALL"
set dstintf "port9"
set traffic-shaper "1Mbps"
set traffic-shaper-reverse "1Mbps"
set srcaddr "all"
set dstaddr "all"
next
end
To troubleshoot shared traffic shapers:
1. To check if specific traffic is attached to the correct traffic shaper, run the diagnose firewall iprope list
100015 command. The example output shows the traffic attached to the 10Mbps and 1Mbps shapers:
# diagnose firewall iprope list 100015
policy index=1 uuid_idx=0 action=accept
flag (0):
shapers: orig=10Mbps(2/1280000/2560000)
cos_fwd=0 cos_rev=0
group=00100015 av=00000000 au=00000000 split=00000000
host=4 chk_client_info=0x0 app_list=0 ips_view=0
misc=0 dd_type=0 dd_mode=0
zone(1): 0 -> zone(1): 38
source(1): 0.0.0.0-255.255.255.255, uuid_idx=0,
dest(1): 0.0.0.0-255.255.255.255, uuid_idx=0,
service(15):
[6:0x0:0/(1,65535)->(1720,1720)] helper:auto
[6:0x0:0/(1,65535)->(1503,1503)] helper:auto
[17:0x0:0/(1,65535)->(1719,1719)] helper:auto
[6:0x0:0/(1,65535)->(6660,6669)] helper:auto
[6:0x0:0/(1,65535)->(1433,1433)] helper:auto
[6:0x0:0/(1,65535)->(1434,1434)] helper:auto
[6:0x0:0/(1,65535)->(3306,3306)] helper:auto
[6:0x0:0/(1,65535)->(554,554)] helper:auto
[6:0x0:0/(1,65535)->(7070,7070)] helper:auto
[6:0x0:0/(1,65535)->(8554,8554)] helper:auto
[17:0x0:0/(1,65535)->(554,554)] helper:auto
[6:0x0:0/(1,65535)->(2000,2000)] helper:auto
FortiOS 6.4.2 Administration Guide 958
Fortinet Inc.
Policy and Objects
[6:0x0:0/(1,65535)->(5060,5060)] helper:auto
[17:0x0:0/(1,65535)->(5060,5060)] helper:auto
[6:0x0:0/(1,65535)->(1863,1863)] helper:auto
policy index=2 uuid_idx=0 action=accept
flag (0):
shapers: orig=1Mbps(4/128000/1280000)
cos_fwd=0 cos_rev=0
group=00100015 av=00000000 au=00000000 split=00000000
host=4 chk_client_info=0x0 app_list=0 ips_view=0
misc=0 dd_type=0 dd_mode=0
zone(1): 0 -> zone(1): 38
source(1): 0.0.0.0-255.255.255.255, uuid_idx=0,
dest(1): 0.0.0.0-255.255.255.255, uuid_idx=0,
service(1):
[0:0x0:0/(0,0)->(0,0)] helper:auto
2. To check if the correct traffic shaper is applied to the session, run the diagnose sys session list command.
The example output shows that the 1Mbps shaper is applied to the session:
# diagnose sys session list
session info: proto=6 proto_state=01 duration=11 expire=3599 timeout=3600 flags=00000000
sockflag=00000000 sockport=0 av_idx=0 use=5
origin-shaper=1Mbps prio=4 guarantee 128000Bps max 1280000Bps traffic 1050Bps drops 0B
reply-shaper=
per_ip_shaper=
class_id=0 shaping_policy_id=2 ha_id=0 policy_dir=0 tunnel=/ helper=ftp vlan_cos=0/255
state=may_dirty npu npd os mif route_preserve
statistic(bytes/packets/allow_err): org=868/15/1 reply=752/10/1 tuples=2
tx speed(Bps/kbps): 76/0 rx speed(Bps/kbps): 66/0
orgin->sink: org pre->post, reply pre->post dev=39->38/38->39 gwy=172.16.200.55/0.0.0.0
hook=post dir=org act=snat 10.1.100.11:58241->172.16.200.55:21(172.16.200.1:58241)
hook=pre dir=reply act=dnat 172.16.200.55:21->172.16.200.1:58241(10.1.100.11:58241)
pos/(before,after) 0/(0,0), 0/(0,0)
misc=0 policy_id=1 auth_info=0 chk_client_info=0 vd=4
serial=0003255f tos=ff/ff app_list=0 app=0 url_cat=0
sdwan_mbr_seq=0 sdwan_service_id=0
rpdb_link_id = 00000000
dd_type=0 dd_mode=0
npu_state=0x100000
npu info: flag=0x00/0x00, offload=0/0, ips_offload=0/0, epid=0/0, ipid=0/0,
vlan=0x0000/0x0000
vlifid=0/0, vtag_in=0x0000/0x0000 in_npu=0/0, out_npu=0/0, fwd_en=0/0, qid=0/0
no_ofld_reason: offload-denied helper
total session 1
3. To check statuses of shared traffic shapers, run the diagnose firewall shaper traffic-shaper list
command. The output should resemble the following:
# diagnose firewall shaper traffic-shaper list
name 10Mbps
maximum-bandwidth 2500 KB/sec
guaranteed-bandwidth 1250 KB/sec
current-bandwidth 0 B/sec
priority 2
tos ff
packets dropped 0
bytes dropped 0
FortiOS 6.4.2 Administration Guide 959
Fortinet Inc.
Policy and Objects
name 1Mbps
maximum-bandwidth 1250 KB/sec
guaranteed-bandwidth 125 KB/sec
current-bandwidth 0 B/sec
priority 4
tos ff
packets dropped 0
bytes dropped 0
Per-IP traffic shaper
With per-IP traffic shaping, you can limit each IP address's behavior to avoid a situation where one user uses all of the
available bandwidth. In addition to controlling the maximum bandwidth used per IP address, you can also define the
maximum number of concurrent sessions for an IP address. For example, if you apply a per-IP shaper of 1 Mbps to your
entire network, FortiOS allocates each user/IP address 1 Mbps of bandwidth. Even if the network consists of a single
user, FortiOS allocates them 1 Mbps. If there are ten users, each user gets 1 Mbps of bandwidth, totaling 10 Mbps of
outgoing traffic.
For shared shapers, all users share the set guaranteed and maximum bandwidths. For example, if you set a shared
shaper for all PCs using an FTP service to 10 Mbps, all users uploading to the FTP server share the 10 Mbps.
Shared shapers affect upload speed. If you want to limit the download speed from the FTP server in the example, you
must configure the shared shaper as a reverse shaper. Per-IP shapers apply the speed limit on both upload and
download operations. Only traffic through forward traffic shapers will be included in FortiView; reverse and per-IP
shapers are not included.
The following example shows how to apply a per-IP shaper to a traffic shaping policy. This shaper assigns each user a
maximum bandwidth of 1 Mbps and allows each user to have a maximum of ten concurrent connections to the FTP
server. In the example, FortiOS communicates with users using port10 and the FTP server using port9.
To configure a per-IP traffic shaper in the GUI:
1. Create a firewall policy:
a. Go to Policy & Objects > IPv4 Policy and click Create New.
b. Set the Name to FTP Access.
c. Set the Incoming Interface to port10.
d. Set the Outgoing Interface to port9.
e. Set the Source to all.
f. Set the Destination to FTP_Server.
g. Set the Schedule to always.
h. Set the Service to ALL.
i. Click OK.
2. Create the per-IP traffic shaper:
a. Go to Policy & Objects > Traffic Shapers and click Create New.
b. Set Type to Per IP Shaper.
c. Set the Name to FTP_Max_1M. This shaper is for VoIP traffic.
d. Enable Max Bandwidth and enter 1000.
e. Enable Max Concurrent Connections and enter 10. This means that each user can have up to ten concurrent
connections to the FTP server.
FortiOS 6.4.2 Administration Guide 960
Fortinet Inc.
Policy and Objects
f. Click OK.
3. Create a firewall shaping policy:
a. Go to Policy & Objects > Traffic Shaping Policy and click Create New.
b. Set the Name to FTP speed 1M.
c. Set the Source to the addresses and users that require access to the FTP server.
d. Set the Destination to FTP_Server.
e. Set the Service to ALL.
f. Set the Outgoing Interface to port9.
g. Enable Per-IP shaper and select FTP_Max_1M.
h. Click OK.
To configure a per-IP traffic shaper in the CLI:
1. Create a firewall policy:
config firewall policy
edit 1
set name "FTP Access"
set srcintf "port10"
set dstintf "port9"
set srcaddr "all"
set dstaddr "FTP_Server"
set action accept
set schedule "always"
set service "ALL"
set fsso disable
set nat enable
next
end
2. Create the per-IP traffic shaper:
config firewall shaper per-ip-shaper
edit "FTP_Max_1M"
set max-bandwidth 1000
set max-concurrent-session 10
next
end
3. Create a firewall shaping policy:
config firewall shaping-policy
edit 1
set name "FTP speed 1M"
set service "ALL"
set dstintf "port9"
set per-ip-shaper "FTP_Max_1M"
set srcaddr "PC1" "WinPC" "PC2"
FortiOS 6.4.2 Administration Guide 961
Fortinet Inc.
Policy and Objects
set dstaddr "FTP_Server"
next
end
To troubleshoot per-IP traffic shapers:
1. To check if specific traffic is attached to the correct traffic shaper, run the diagnose firewall iprope list
100015 command. The example output shows the traffic attached to the FTP_Max_1M shaper:
# diagnose firewall iprope list 100015
policy index=3 uuid_idx=0 action=accept
flag (0):
shapers: per-ip=FTP_Max_1M
cos_fwd=0 cos_rev=0
group=00100015 av=00000000 au=00000000 split=00000000
host=2 chk_client_info=0x0 app_list=0 ips_view=0
misc=0 dd_type=0 dd_mode=0
zone(1): 0 -> zone(1): 38
source(3): 10.1.100.11-10.1.100.11, uuid_idx=30, 10.1.100.143-10.1.100.143, uuid_idx=32,
10.1.100.22-10.1.100.22, uuid_idx=31,
dest(1): 172.16.200.55-172.16.200.55, uuid_idx=89,
service(1):
[0:0x0:0/(0,65535)->(0,65535)] helper:auto
2. To check if the correct traffic shaper is applied to the session, run the diagnose sys session list command.
The example output shows that the FTP_Max_1M shaper is applied to the session:
# diagnose sys session list
session info: proto=6 proto_state=01 duration=36 expire=3567 timeout=3600 flags=00000000
sockflag=00000000 sockport=0 av_idx=0 use=4
origin-shaper=
reply-shaper=
per_ip_shaper=FTP_Max_1M
class_id=0 shaping_policy_id=3 ha_id=0 policy_dir=0 tunnel=/ helper=ftp vlan_cos=0/255
state=may_dirty per_ip npu npd mif route_preserve
statistic(bytes/packets/allow_err): org=506/9/1 reply=416/6/1 tuples=2
tx speed(Bps/kbps): 0/0 rx speed(Bps/kbps): 0/0
orgin->sink: org pre->post, reply pre->post dev=39->38/38->39 gwy=172.16.200.55/0.0.0.0
hook=post dir=org act=snat 10.1.100.11:58275->172.16.200.55:21(172.16.200.1:58275)
hook=pre dir=reply act=dnat 172.16.200.55:21->172.16.200.1:58275(10.1.100.11:58275)
pos/(before,after) 0/(0,0), 0/(0,0)
misc=0 policy_id=1 auth_info=0 chk_client_info=0 vd=2
serial=0000211a tos=ff/ff app_list=0 app=0 url_cat=0
sdwan_mbr_seq=0 sdwan_service_id=0
rpdb_link_id = 00000000
dd_type=0 dd_mode=0
npu_state=0x100000
npu info: flag=0x00/0x00, offload=0/0, ips_offload=0/0, epid=0/0, ipid=0/0,
vlan=0x0000/0x0000
vlifid=0/0, vtag_in=0x0000/0x0000 in_npu=0/0, out_npu=0/0, fwd_en=0/0, qid=0/0
no_ofld_reason: offload-denied helper
3. To check statuses of per-IP traffic shapers, run the diagnose firewall shaper per-ip-shaper list
command. The output should resemble the following:
# diagnose firewall shaper per-ip-shaper list
name FTP_Max_1M
maximum-bandwidth 125 KB/sec
maximum-concurrent-session 10
FortiOS 6.4.2 Administration Guide 962
Fortinet Inc.
Policy and Objects
tos ff/ff
packets dropped 0
bytes dropped 0
addr=10.1.100.11 status: bps=0 ses=3
Type of Service-based prioritization and policy-based traffic shaping
Priority queues
After packet acceptance, FortiOS classifies traffic and may apply Quality of Service (QoS) techniques, such as
prioritization and traffic shaping. Traffic shaping consists of a mixture of traffic policing to enforce bandwidth limits and
priority queue adjustment to assist packets in achieving the guaranteed rate.
If you have configured prioritization, FortiOS prioritizes egressing packets by distributing them among first in first out
(FIFO) queues associated with each possible priority number. Each physical interface has six priority queues. Virtual
interfaces use the priority queues of the physical interface that they are bound to.
The physical interface's six queues are queue 0 to 5, where queue 0 is the highest priority queue. You might observe that
your traffic uses only a subset of those six queues. For example, some traffic may always use a certain queue number.
Queuing may also vary by the packet rate or mixture of services. Some queue numbers may only be used by through
traffic for which you have configured traffic shaping in the security policy that applies to that traffic session.
l Administrative access traffic always uses queue 0.
l Traffic matching firewall policies without traffic shaping may use queue 0, 1, or 2. The queue is selected based on
the priority value you have configured for packets with that ToS bit value, if you have configured ToS-based
priorities.
l Traffic matching firewall shaping policies with traffic shaping enabled can use any queue. The queue is selected
based on whether the packet rate is currently below the guaranteed bandwidth (queue 0), or above the guaranteed
bandwidth. Packets at rates greater than the maximum bandwidth limit are dropped.
Priority types
Packets can be assigned a priority in one of three types:
FortiOS 6.4.2 Administration Guide 963
Fortinet Inc.
Policy and Objects
l On entering ingress – for packets flowing through the firewall.
l Upon generation – for packets generated by the firewall (including packets generated due to AV proxying).
l On passing through a firewall policy – for packets passing through a firewall policy (firewall shaping policy) that has
a traffic shaper defined.
ToS priority
The first and second types, ingress priority and priority for generated packets, are controlled by two different CLI
settings:
config system global
set traffic-priority-level {high | medium | low}
end
config system tos-based-priority
edit 1
set tos [0-15] <---- type of service bit in the IP datagram header with a value
between 0 and 15
set priority (high | medium | low) <---- priority of this type of service
next
end
Each priority level is mapped to a value as follows:
ToS priority Value
High 0
Medium 1
Low 2
ToS-based traffic prioritization cannot be used to apply bandwidth limits and guarantees, but
can be used to prioritize traffic at per-packet levels.
Example
In the following example configuration, packets with ToS bit values of 10 are prioritized as medium and packets with ToS
bit values of 20 are prioritized as high. All the other traffic is prioritized as low.
config system global
set traffic-priority-level low
end
config system tos-based-priority
edit 1
set tos 10
set priority medium
next
edit 2
set tos 20
set priority high
next
end
FortiOS 6.4.2 Administration Guide 964
Fortinet Inc.
Policy and Objects
Firewall shaping policy priority
You can enable traffic shaping in a firewall shaping policy. In the shared traffic shaper, you can set the firewall priority to
high, medium, or low:
config firewall shaper traffic-shaper
edit 1
set priority {high | medium | low}
next
end
As the priority in a traffic shaper is set to high by default, you must set some traffic at a lower priority to see results. Each
priority level is mapped to a value as follows:
Firewall policy priority Value
High (default) 1
Medium 2
Low 3
Combination of two priority types
To combine the two priority types, the global or ingress ToS-based priority value is combined with the firewall policy
priority value:
ToS priority (0, 1, 2) + policy priority (1, 2, 3) = total priority (queue number)
Consider the following scenarios:
l If the current packet rate is less than the guaranteed bandwidth, packets use priority queue 0. Packet priority is 0.
l If the current packet rate exceeds the maximum bandwidth, excess packets are dropped.
l If the current packet rate is greater than the guaranteed bandwidth but less than the maximum bandwidth, FortiOS
assigns a priority queue by adding the ToS-based priority and the firewall priority.
For example, if you have enabled traffic shaping in the security policy and the security policy's traffic priority is low
(value 3), and the priority normally applied to packets with that ToS bit is medium (value 1), the packets have a total
packet priority of 4, and use priority queue 4.
FortiOS 6.4.2 Administration Guide 965
Fortinet Inc.
Policy and Objects
Interface-based traffic shaping profile
A traffic shaping policy can be used for interface-based traffic shaping by organizing traffic into 30 class IDs. The shaping
profile defines the percentage of the interface bandwidth that is allocated to each class. Each traffic class ID is shaped to
the assigned speed according to the outgoing bandwidth limit configured to the interface.
Traffic classification
A shaping policy classifies traffic and organizes it into different class IDs, based on matching criteria. For traffic matching
a criteria, you can choose to put it into 30 different shaping classes, identified by class ID 2 to 31.
You must select an outgoing interface for the traffic. The shaping policy is only applied when the traffic goes to one of the
selected outgoing interfaces.
Criterion Description
Source l Address: match the source address of the traffic to the selected address or
address group.
l User: use the user credentials of the traffic to match the selected user or user
group. At least one address, address group, or internet service must also be
selected.
l Internet service: match the traffic to the selected internet service. Internet
services cannot be used if addresses or address or groups are used.
Destination l Address: match the destination address of the traffic to the selected address
or address group.
l Internet service: match the traffic to the selected internet service. Internet
services cannot be used if addresses or address or groups are used.
Schedule Match the current date and time to the selected schedule. You can select a one-
time schedule, recurring schedule, or schedule group. This setting is optional.
Service Match the service of the traffic to the selected service or service group.
Application Match the application of the traffic to the selected application, application
category, or application group.
Application control must be enabled in the related firewall policy to know the
application of the traffic. See Application control on page 1088 for more
information.
URL category Match the URL of the traffic to the selected URL category.
Web filter must be enabled in the related firewall policy to know the URL of the
traffic. See Web filter on page 1032 for more information.
When multiple items are selected in one criterion, it is considered a match when traffic
matches any one of them.
FortiOS 6.4.2 Administration Guide 966
Fortinet Inc.
Policy and Objects
Traffic prioritization
Shaping profiles define how different shaping classes of traffic are prioritized. For each class, you can define three
prioritization strategies: guaranteed bandwidth, maximum bandwidth, and priority.
For each shaping profile, a default shaping class must be defined. Traffic is prioritized based on the default shaping
group in the following two circumstances:
l All traffic to the outgoing interface that does not match to any shaping policy
l Traffic with a shaping group that is not defined in a shaping profile
Prioritization strategy Description
Guaranteed bandwidth The percentage of the link speed that is reserved for the shaping group.
The total guaranteed bandwidth for all shaping groups cannot exceed 100%.
Maximum bandwidth The maximum percentage of the link speed that the shaping group can use.
Priority The shaping class priority: top, critical, high, medium, or low. When groups are
competing for bandwidth on the interface, the group with the higher priority wins.
Applying a shaping profile to an interface
Traffic shaping is accomplished by configuring the outgoing bandwidth and outgoing shaping profile on an interface. The
shaping profile uses the outgoing bandwidth of the interface as the maximum link speed, and it only works when the
outgoing bandwidth is configured.
This example shows how to apply interface-based traffic shaping to web and file accessing traffic according to a
schedule:
l The link speed of the wan1 interface is 10 Mb/s.
l File access can use up to 2 Mb/s from 8:00 AM to 6:00 PM.
l Web access can use 8 Mb/s from 8:00 AM to 6:00 PM.
Putting the traffic into shaping classes
To create a recurring schedule in the GUI:
1. Go to Policy & Objects > Schedules.
2. Click Create New > Schedule.
FortiOS 6.4.2 Administration Guide 967
Fortinet Inc.
Policy and Objects
3. Configure a recurring schedule called Day_Hours for everyday from 8:00 AM to 6:00 PM.
4. Click OK.
To create a traffic shaping policy and class ID for the web accessing traffic in the GUI:
1. Go to Policy & Objects > Traffic Shaping Policy and click Create New.
2. Enter a name for the policy, such as web_access_day_hours.
3. Enable Schedule and select the schedule you just created.
4. Set Service to web accessing services, such as HTTP and HTTPS.
5. Set Action to Assign Shaping Class ID, and Outgoing interface to wan1
6. Click the Traffic shapping class ID drop down then click Create.
7. Enter a value for the ID (integer) and a description for the Name, such as Web Access.
8. Click OK.
9. Set Traffic shaping class ID to the just created class ID.
10. Configure the remaining settings as required.
11. Click OK.
To create a traffic shaping policy and class ID for the file accessing traffic in the GUI:
1. Go to Policy & Objects > Traffic Shaping Policy and click Create New.
2. Enter a name for the policy, such as file_access_day_hours.
3. Enable Schedule and select the schedule you just created.
4. Set Service to file accessing services, such as ASF3, FTP and SMB.
5. Set Action to Assign Shaping Class ID, and Outgoing interface to wan1
6. Click the Traffic shapping class ID drop down then click Create.
FortiOS 6.4.2 Administration Guide 968
Fortinet Inc.
Policy and Objects
7. Enter a value for the ID (integer) and a description for the Name, such as File Access.
8. Click OK.
9. Set Traffic shaping class ID to the just created class ID.
10. Configure the remaining settings as required.
11. Click OK.
To put the traffic into shaping classes in the CLI:
1. Create a recurring schedule:
config firewall schedule recurring
edit "Day_Hours"
set start 08:00
set end 18:00
set day sunday monday tuesday wednesday thursday friday saturday
next
end
2. Create the traffic class IDs:
config firewall traffic-class
edit 3
set class-name "Web Access"
next
edit 4
set class-name "File Access"
next
end
FortiOS 6.4.2 Administration Guide 969
Fortinet Inc.
Policy and Objects
3. Create the web and file accessing traffic shaping policies:
config firewall shaping-policy
edit 2
set name "web_access_day_hours"
set comment "Limit web accessing traffic to 8Mb/s in day time"
set service "HTTP" "HTTPS"
set schedule "Day_Hours"
set dstintf "wan1"
set class-id 3
set srcaddr "all"
set dstaddr "all"
next
edit 3
set name "file_access_day_hours"
set comment "Limit file accessing traffic to 2Mb/s during the day"
set service "AFS3" "FTP" "FTP_GET" "FTP_PUT" "NFS" "SAMBA" "SMB" "TFTP"
set schedule "Day_Hours"
set dstintf "wan1"
set class-id 4
set srcaddr "all"
set dstaddr "all"
next
end
Allocating bandwidth to the shaping classes
A traffic shaping profile defines the guaranteed and maximum bandwidths each class receives. In this example, file
access can use up to 2 Mb/s and web access can use 8 Mb/s from 8:00 AM to 6:00 PM.
To create a traffic shaping profile using the GUI:
1. Go to Policy & Objects > Traffic Shaping Profile and click Create New.
2. Enter a name for the profile, such as Day_Hours_Profile.
3. Configure a default traffic shaping class:
This class has a high priority, meaning that when the other classes have reached their guaranteed bandwidths, this
default class will use the rest of the available bandwidth.
a. In the Traffic Shaping Classes table click Create New.
b. Click the Traffic shapping class ID drop down then click Create.
c. Enter a name for the class, such as Default Access.
d. Click OK.
e. Set Traffic shaping class ID to the just created class ID.
FortiOS 6.4.2 Administration Guide 970
Fortinet Inc.
Policy and Objects
f. Configure the following settings, then click OK:
Guaranteed bandwidth 30
Maximum bandwidth 100
Priority High
4. Configure a web accessing traffic shaping class:
When other types of traffic are competing for bandwidth, this class is guaranteed to 6 Mb/s, or 60% of the
bandwidth.
a. In the Traffic Shaping Classes table click Create New.
b. Configure the following settings, then click OK:
Traffic shaping class ID Web Access
Guaranteed bandwidth 60
Maximum bandwidth 80
Priority High
5. Configure a file accessing traffic shaping class:
When other types of traffic are competing for bandwidth, this group is guaranteed to 1 Mb/s, or 10% of the
bandwidth.
a. In the Traffic Shaping Classes table click Create New.
b. Configure the following settings, then click OK:
Traffic shaping class ID File Access
Guaranteed bandwidth 10
Maximum bandwidth 20
Priority High
FortiOS 6.4.2 Administration Guide 971
Fortinet Inc.
Policy and Objects
6. Click OK.
To create a traffic shaping profile using the CLI:
config firewall shaping-profile
edit "Day_Hours_Profile"
set default-class-id 2
config shaping-entries
edit 1
set class-id 2
set guaranteed-bandwidth-percentage 30
set maximum-bandwidth-percentage 100
next
edit 2
set class-id 3
set priority medium
set guaranteed-bandwidth-percentage 60
set maximum-bandwidth-percentage 80
next
edit 3
set class-id 4
set priority medium
set guaranteed-bandwidth-percentage 10
set maximum-bandwidth-percentage 20
next
end
FortiOS 6.4.2 Administration Guide 972
Fortinet Inc.
Policy and Objects
next
end
Defining the available bandwidth on an interface
In this example, the link speed of the wan1 interface is 10 Mb/s.
To set the bandwidth of the wan1 interface in the GUI:
1. Go to Network > Interfaces.
2. Edit the wan1 interface.
3. Under Traffic Shaping, enable Outbound shaping profile and select the profile that you just created, Day_Hours_
Profile.
4. Enable Outbound Bandwidth and set it to 10000 Kbps.
5. Click OK.
To set the bandwidth of the wan1 interface in the CLI:
config system interface
edit "wan1"
....
set egress-shaping-profile "Day_Hours_Profile"
set outbandwidth 10000
....
next
end
Diagnose commands
To check that the specific traffic is put into the correct shaping group or class ID:
# diagnose firewall iprope list 100015
To check the speed limit for each class ID on an interface:
# diagnose netlink interface list wan1
FortiOS 6.4.2 Administration Guide 973
Fortinet Inc.
Policy and Objects
Interface-based traffic shaping with NP acceleration
Interface-based traffic shaping with NP acceleration is supported on some devices.
An administrator configures the WAN interface's maximum outbound bandwidth and, based on that, creates a traffic
shaping profile with a percentage based shaper. This allows for proper QoS and traffic shaping. VLAN interfaces are not
supported.
This feature is supported on FortiGate 600E, 500E, and 300E models.
To configure interface-based traffic shaping:
1. Enable NPU offloading when doing interface-based traffic shaping according to the egress-shaping-profile:
config system npu
set intf-shaping-offload enable
end
2. Configure shaping profiles:
config firewall shaping-profile
edit "sdwan"
set default-class-id 4
config shaping-entries
edit 1
set class-id 4
set guaranteed-bandwidth-percentage 3
set maximum-bandwidth-percentage 5
next
edit 2
set class-id 3
set priority medium
set guaranteed-bandwidth-percentage 50
set maximum-bandwidth-percentage 100
next
edit 3
set class-id 2
set priority low
set guaranteed-bandwidth-percentage 1
set maximum-bandwidth-percentage 5
next
end
next
end
The class number is limited to 16.
3. Configure a traffic shaper and shaping policy:
config firewall shaper traffic-shaper
edit "Transactional"
set priority medium
next
end
FortiOS 6.4.2 Administration Guide 974
Fortinet Inc.
Policy and Objects
config firewall shaping-policy
edit 1
set service "ALL"
set dstintf "any"
set traffic-shaper "Transactional"
set class-id 3
set srcaddr "all"
set dstaddr "all"
next
end
4. Apply the egress shaping profile on the interface:
config system interface
edit "port2"
set vdom "root"
set ip 10.1.100.23 255.255.255.0
set allowaccess ping
set type physical
set outbandwidth 500
set egress-shaping-profile "sdwan"
set snmp-index 4
next
end
5. Configure a firewall policy:
config firewall policy
edit 3
set srcintf "port2"
set dstintf "port1"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set logtraffic all
set nat enable
next
end
Classifying traffic by source interface
In firewall shaping policies, you can classify traffic by source interface with the following command:
config firewall shaping-policy
edit 1
set srcintf <interface_name>
......
next
end
FortiOS 6.4.2 Administration Guide 975
Fortinet Inc.
Policy and Objects
Sample configuration
For this example, there are two shaping policies:
l Policy 1 is for traffic from the Office to the Server, with the speed limited to 5 MB/s.
l Policy 2 is for traffic from the Lab to the Server, with the speed limited to 1 MB/s.
To configure the traffic shaping policy:
config firewall shaping-policy
edit 1
set name "Office_Speed_5MB"
set service "ALL"
set srcintf "port13"
set dstintf "port9"
set traffic-shaper "5MB/s"
set traffic-shaper-reverse "5MB/s"
set srcaddr "all"
set dstaddr "all"
next
edit 2
set name "Lab_Speed_1MB"
set service "ALL"
set srcintf "port10"
set dstintf "port9"
set traffic-shaper "1MB/s"
set traffic-shaper-reverse "1MB/s"
set srcaddr "all"
set dstaddr "all"
next
end
Configuring traffic class IDs
As of FortiOS 6.2.2, you can configure traffic class IDs with a descriptive name in the GUI or CLI. Class IDs can help you
correlate traffic shaping policy and profile entries.
GUI configurations
Within the GUI, there are three locations to configure the traffic class ID:
FortiOS 6.4.2 Administration Guide 976
Fortinet Inc.
Policy and Objects
l Traffic shaping policy
l Traffic shaping profile
l Interface
Assign Shaping Class ID replaces the Assign Group functionality in earlier versions of
FortiOS.
To configure the traffic class ID in a traffic shaping policy:
1. Go to Policy & Objects > Traffic Shaping Policy.
2. Edit an existing policy, or create a new one.
3. In the Then: Action section, click Assign Shaping Class ID.
4. In Traffic shaping class ID, click Create.
5. Enter a value for the ID (integer) and a description for the Name.
6. Click OK to save the class ID.
7. Configure the rest of the policy as needed.
8. Click OK to save the policy.
To configure the traffic class ID in a traffic shaping profile:
1. Go to Policy & Objects > Traffic Shaping Profile.
2. Edit an existing profile, or create a new one.
3. In the Traffic Shaping Classes section, click Create New. The Select Traffic Shaping Class ID window opens.
4. Click Create. The New Traffic Shaping Class ID window opens.
5. Enter a value for the ID (integer) and a description for the Name.
FortiOS 6.4.2 Administration Guide 977
Fortinet Inc.
Policy and Objects
6. Click OK to save the class ID.
7. Click OK to add the class ID.
8. Configure the rest of the profile as needed.
9. Click OK to save the profile.
To configure the traffic class ID in an interface:
1. Go to Network > Interfaces.
2. Edit an existing interface, or create a new one.
3. In the Traffic Shaping section, enable Outbound shaping profile and Outbound Bandwidth.
4. Click Create. The Create Traffic Shaping Profile window opens.
5. Click Create New. The Select Traffic Shaping Class ID window opens.
6. Select an existing class ID, or create a new one.
7. Click OK to save the class ID.
8. Click OK to add the class ID .
FortiOS 6.4.2 Administration Guide 978
Fortinet Inc.
Policy and Objects
9. Configure the rest of the interface as needed.
10. Click OK to save the interface.
CLI configuration
To configure the traffic class ID in the CLI:
config firewall traffic-class
edit 2
set class-name "High priority voice."
next
...
end
Traffic shaping schedules
In a shaping policy, there are many matching criteria available for administrators to match a specific traffic and apply a
traffic shaper or shaping group to the traffic, including using schedules. This feature gives shaping policy the ability to
apply different shaping profiles at different times. Administrators can select a one-time schedule, recurring schedule, or
schedule group.
Schedule is not a mandatory setting. If it is not set, then the current date and time are not used to match the traffic.
To configure a traffic shaping policy in the GUI:
1. Navigate to Policy & Objects > Traffic Shaping Policy.
2. Create or edit a Traffic Shaping Policy.
3. Enable Schedule and select a schedule option.
FortiOS 6.4.2 Administration Guide 979
Fortinet Inc.
Policy and Objects
4. Configure other options and click OK.
To configure a traffic shaping policy in the CLI:
config firewall schedule recurring
edit "work-hours"
set start 07:00
set end 20:00
set day monday tuesday wednesday thursday friday
next
end
config firewall shaping-policy
edit 1
set name "demo"
set service "ALL"
set schedule "work-hours" <<< Can select schedule from one-time schedule, recurring
schedule or schedule group
set dstintf "port1"
set traffic-shaper "high-priority"
set traffic-shaper-reverse "high-priority"
set srcaddr "all"
set dstaddr "all"
next
end
To troubleshoot a traffic shaping policy in the CLI:
The selected schedule is listed in the iprope.
diagnose firewall iprope list 100015
policy index=1 uuid_idx=0 action=accept
flag (0):
schedule(work-hours)
shapers: orig=high-priority(2/0/134217728) reply=high-priority(2/0/134217728)
cos_fwd=0 cos_rev=0
group=00100015 av=00000000 au=00000000 split=00000000
host=1 chk_client_info=0x0 app_list=0 ips_view=0
misc=0 dd_type=0 dd_mode=0
zone(1): 0 -> zone(1): 9
source(1): 0.0.0.0-255.255.255.255, uuid_idx=28,
dest(1): 0.0.0.0-255.255.255.255, uuid_idx=28,
service(1):
[0:0x0:0/(0,65535)->(0,65535)] helper:auto
DSCP matching (shaping)
This feature has three parts:
l DSCP matching in firewall policies
l DSCP matching in firewall shaping policies
l DSCP marking in firewall shaping policies
FortiOS 6.4.2 Administration Guide 980
Fortinet Inc.
Policy and Objects
DSCP matching in firewall policies
Traffic is allowed or blocked according to the Differentiated Services Code Point (DSCP) values in the incoming packets.
The following CLI variables are available in the config firewall policy command:
tos-mask <mask_value> Non-zero bit positions are used for comparison. Zero bit positions are ignored
(default = 0x00).
This variable replaces the dscp-match variable.
tos <tos_value> Type of Service (ToC) value that is used for comparison (default = 0x00). This
variable is only available when tos-mask is not zero.
This variable replaces the dscp-value variable.
tos-negate {enable | Enable/disable negated ToS match (default = disable). This variable is only
disable} available when tos-mask is not zero.
This variable replaces the dscp-negate variable.
DSCP matching in firewall shaping policies
Shaping is applied to the session or not according to the DSCP values in the incoming packets. The same logic and
commands as in firewall policies are used.
DSCP marking in firewall shaping policies
Traffic is allowed or blocked according to the DSCP values in the incoming packets. DSCP marking in firewall shaping
policies uses the same logic and commands as in firewall policy and traffic-shaper.
When DSCP marking on firewall shaper traffic-shaper, firewall shaping-policy, and firewall
policy all apply to the same session, shaping-policy overrides policy, and shaper traffic-shaper
overrides both shaping-policy and policy.
The following CLI variables in config firewall policy are used to mark the packets:
diffserv-forward {enable Enable/disable changing a packet's DiffServ values to the value specified in
| disable} diffservcode-forward (default = disable).
diffservcode-forward The value that packet's DiffServ is set to (default = 000000). This variable is only
<dscp_value> available when diffserv-forward is enabled.
diffserv-reverse {enable Enable/disable changing a packet's reverse (reply) DiffServ values to the value
| disable} specified in diffservcode-rev (default = disable).
diffservcode-rev <dscp_ The value that packet's reverse (reply) DiffServ is set to (default = 000000). This
value> variable is only available when diffserv-rev is enabled.
FortiOS 6.4.2 Administration Guide 981
Fortinet Inc.
Policy and Objects
Examples
Example 1
FortiGate A marks traffic from the sales and QA teams with different DSCP values. FortiGate B does DSCP matching,
allowing only the sales team to access the database.
1. Configure FortiGate A:
config firewall policy
edit 1
set srcintf "port2"
set dstintf "port3"
set srcaddr "QA"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set diffserv-forward enable
set diffservcode-forward 110000
set nat enable
next
edit 5
set srcintf "port2"
set dstintf "port3"
set srcaddr "Sales"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set diffserv-forward enable
set diffservcode-forward 111011
set nat enable
next
end
2. Configure FortiGate B:
config firewall policy
edit 2
set srcintf "port3"
set dstintf "port1"
set srcaddr "all"
set dstaddr "Database"
set action accept
set schedule "always"
set service "ALL"
set tos-mask 0xf0
FortiOS 6.4.2 Administration Guide 982
Fortinet Inc.
Policy and Objects
set tos 0xe0
set fsso disable
set nat enable
next
end
Example 2
FortiGate A marks traffic from the sales and QA teams with different DSCP values. FortiGate B uses a firewall shaping
policy to do the DSCP matching, limiting the connection speed of the sales team to the database to 10MB/s.
1. Configure FortiGate A:
config firewall policy
edit 1
set srcintf "port2"
set dstintf "port3"
set srcaddr "QA"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set diffserv-forward enable
set diffservcode-forward 110000
set nat enable
next
edit 5
set srcintf "port2"
set dstintf "port3"
set srcaddr "Sales"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set diffserv-forward enable
set diffservcode-forward 111011
set nat enable
next
end
2. Configure FortiGate B:
config firewall policy
edit 2
set srcintf "port3"
set dstintf "port1"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set nat enable
next
end
config firewall shaper traffic-shaper
edit "10MB/s"
set guaranteed-bandwidth 60000
FortiOS 6.4.2 Administration Guide 983
Fortinet Inc.
Policy and Objects
set maximum-bandwidth 80000
next
end
config firewall shaping-policy
edit 1
set service "ALL"
set dstintf "port1"
set tos-mask 0xf0
set tos 0xe0
set traffic-shaper "10MB/s"
set srcaddr "all"
set dstaddr "all"
next
end
Example 3
FortiGate A has a traffic shaping policy to mark traffic from the QA team with a DSCP value of 100000, while reverse
traffic is marked with 000011.
1. Configure FortiGate A:
config firewall shaping-policy
edit 1
set name "QA Team 50MB"
set service "ALL"
set dstintf "port3"
set traffic-shaper "50MB/s"
set traffic-shaper-reverse "50MB/s"
set diffserv-forward enable
set diffserv-reverse enable
set srcaddr "QA"
set dstaddr "all"
set diffservcode-forward 100000
set diffservcode-rev 000011
next
end
QoS assignment and rate limiting for quarantined VLANs
When devices are quarantined, they are isolated from the rest of the network. However, they can still impact the network
if not controlled beyond isolation. A quarantined host, which offers heavy traffic, could congest the network and create a
DOS-style reduction in service to authorized hosts.
Within the quarantined VLAN, two restrictions are available within the network:
l Traffic policing (also known as rate limiting)
l QoS (Quality of Service) assignment (also known as priority assignment)
Each quarantined host's traffic can be subject to rate limiting and priority adjustment. This reduces the impact that any
quarantined host can have on authorized traffic on the network.
FortiOS 6.4.2 Administration Guide 984
Fortinet Inc.
Policy and Objects
To configure QoS assignment and rate limiting for quarantined VLANs:
1. Configure a traffic policy, or use the default "quarantine" policy:
config switch-controller traffic-policy
edit "quarantine"
set description "Rate control for quarantined traffic"
set guaranteed-bandwidth 163840
set guaranteed-burst 8192
set maximum-burst 163840
set cos-queue 0
next
end
2. Configure an interface:
config system interface
edit "qtn.aggr1"
set vdom "root"
set ip 10.254.254.254 255.255.255.0
set description "Quarantine VLAN"
set security-mode captive-portal
set replacemsg-override-group "auth-intf-qtn.aggr1"
set device-identification enable
set snmp-index 30
set switch-controller-access-vlan enable
set switch-controller-traffic-policy "quarantine"
set color 6
set interface "aggr1"
set vlanid 4093
next
end
By default, switch-controller-traffic-policy is empty. You need to apply the necessary traffic policy (not
only limited to "quarantine").
Weighted random early detection queuing
You can use the weighted random early detection (WRED) queuing function within traffic shaping.
This topic includes three parts:
l Traffic shaping with queuing
l Burst control in queuing mode
l Multi-stage DSCP marking and class ID in traffic shapers
You cannot configure or view WRED in the GUI; you must use the CLI.
WRED is not supported when traffic is offloaded to an NPU.
FortiOS 6.4.2 Administration Guide 985
Fortinet Inc.
Policy and Objects
Traffic shaping with queuing
Traffic shaping has a queuing option. Use this option to fine-tune the queue by setting the profile queue size or
performing random early drop (RED) according to queue usage.
This example shows setting the profile queue size limit to 5 so that the queue can contain a maximum of five packets and
more packets are dropped.
To set the profile queue size limit:
config firewall shaping-profile
edit "profile"
set type queuing
set default-class-id 31
config shaping-entries
edit 31
set class-id 31
set guaranteed-bandwidth-percentage 5
set maximum-bandwidth-percentage 10
set limit 5 <range from 5 to 10000; default: 1000>
next
end
next
end
This example shows performing RED according to queue usage by setting red-probability, min, and max. Setting
red-probability to 10 means start to drop packets when queue usage reaches the min setting. When queue usage
reaches the max setting, drop 10% of the packets.
l Level 1: when queue is less than min packets, drop 0% of packets.
l Level 2: when queue reaches min packets, start to drop packets.
l Level 3: when queue usage is between min and max packets, drop 0–10% of packets by proportion.
l Level 4: when queue (average queue size) is more than max packets, drop 100% of packets.
To set RED according to queue usage:
config firewall shaping-profile
edit "profile"
set type queuing
set default-class-id 31
config shaping-entries
edit 31
set class-id 31
set guaranteed-bandwidth-percentage 5
set maximum-bandwidth-percentage 10
set red-probability 10 <range from 0 to 20; default: 0 no drop>
set min 100 <range from 3 to 3000>
set max 300 <range from 3 to 3000>
next
end
next
end
FortiOS 6.4.2 Administration Guide 986
Fortinet Inc.
Policy and Objects
To troubleshoot this function, use the following diagnose commands:
diagnose netlink intf-class list <intf>
diagnose netlink intf-qdisc list <intf>
Burst control in queuing mode
In a hierarchical token bucket (HTB) algorithm, each traffic class has buckets to allow a burst of traffic. The maximum
burst is determined by the bucket size burst (for guaranteed bandwidth) and cburst (for maximum bandwidth). The
shaping profile has burst-in-msec and cburst-in-msec parameters for each shaping entry (class id) to control
the bucket size.
This example uses the outbandwidth of the interface as 1 Mbps and the maximum bandwidth of class is 50%.
burst = burst-in-msec * guaranteed bandwidth = 100 ms × 1 Mbps x 50% = 50000 b = 6250 B
cburst = cburst-in-msec * maximum bandwidth = 200 ms × 1 Mbps x 50% = 100000 b = 12500 B
The following example sets burst-in-msec to 100 and cburst-in-msec to 200.
To set burst control in queuing mode:
config firewall shaping-profile
edit "profile"
set type queuing
set default-class-id 31
config shaping-entries
edit 31
set class-id 31
set guaranteed-bandwidth-percentage 5
set maximum-bandwidth-percentage 50
set burst-in-msec 100 <range from 0 to 2000>
set cburst-in-msec 200 <range from 0 to 2000>
next
end
next
end
Multi-stage DSCP marking and class ID in traffic shapers
Traffic shapers have a multi-stage method so that packets are marked with a different differentiated services code point
(DSCP) and class id at different traffic speeds. Marking packets with a different DSCP code is for the next hop to
classify the packets. The FortiGate benefits by marking packets with a different class id. Combined with the egress
interface shaping profile, the FortiGate can handle the traffic differently according to its class id.
Rule DSCP code Class ID
speed < guarantee bandwidth diffservcode class id in shaping policy
guarantee bandwidth < speed < exceed bandwidth exceed-dscp exceed-class-id
exceed bandwidth < speed maximum-dscp exceed-class-id
FortiOS 6.4.2 Administration Guide 987
Fortinet Inc.
Policy and Objects
This example sets the following parameters:
l When the current bandwidth is less than 50 Kbps, mark packets with diffservcode 100000 and set class id to
10.
l When the current bandwidth is between 50 Kbps and 100 Kbps, mark packets with exceed-dscp 111000 and set
exceed-class-id to 20.
l When the current bandwidth is more than 100 Kbps, mark packets with maximum-dscp 111111 and set exceed-
class-id to 20.
To set multi-stage DSCP marking and class ID in a traffic shaper:
config firewall shaper traffic-shaper
edit "50k-100k-150k"
set guaranteed-bandwidth 50
set maximum-bandwidth 150
set diffserv enable
set dscp-marking-method multi-stage
set exceed-bandwidth 100
set exceed-dscp 111000
set exceed-class-id 20
set maximum-dscp 111111
set diffservcode 100000
next
end
config firewall shaping-policy
edit 1
set service "ALL"
set dstintf PORT2
set srcaddr "all"
set dstaddr "all"
set class-id 10
next
end
Traffic shapers also have an overhead option that defines the per-packet size overhead used in rate computation.
To set the traffic shaper overhead option:
config firewall shaper traffic-shaper
edit "testing"
set guaranteed-bandwidth 50
set maximum-bandwidth 150
set overhead 14 <range from 0 to 100>
next
end
FortiOS 6.4.2 Administration Guide 988
Fortinet Inc.
Policy and Objects
Examples
Enabling RED for FTP traffic from QA
This first example shows how to enable RED for FTP traffic from QA. This example sets a maximum of 10% of the
packets to be dropped when queue usage reaches the maximum value.
To configure the firewall address:
config firewall address
edit QA_team
set subnet 10.1.100.0/24
next
end
To set the shaping policy to classify traffic into different class IDs:
config firewall shaping-policy
edit 1
set service HTTPS HTTP
set dstintf port1
set srcaddr QA_team
set dstaddr all
set class-id 10
next
edit 2
set service FTP
set dstintf port1
set srcaddr QA_team
set dstaddr all
set class-id 20
next
end
To set the shaping policy to define the speed of each class ID:
config firewall shaping-profile
edit QA_team_profile
set type queuing
set default-class-id 30
config shaping-entries
edit 1
set class-id 10
set guaranteed-bandwidth-percentage 50
set maximum-bandwidth-percentage 100
next
edit 2
set class-id 20
set guaranteed-bandwidth-percentage 30
set maximum-bandwidth-percentage 60
set red-probability 10
next
edit 3
set class-id 30
set guaranteed-bandwidth-percentage 20
FortiOS 6.4.2 Administration Guide 989
Fortinet Inc.
Policy and Objects
set maximum-bandwidth-percentage 50
next
end
next
end
To apply the shaping policy to the interface:
config sys interface
edit port1
set outbandwidth 10000
set egress-shaping-profile QA_team_profile
next
end
To use diagnose commands to troubleshoot:
# diagnose netlink intf-class list port1
class htb 1:1 root rate 1250000Bps ceil 1250000Bps burst 1600B/8 mpu 0B overhead 0B cburst
1600B/8 mpu 0B overhead 0B level 7 buffer [00004e20] cbuffer [00004e20]
Sent 11709 bytes 69 pkt (dropped 0, overlimits 0 requeues 0)
rate 226Bps 2pps backlog 0B 0p
lended: 3 borrowed: 0 giants: 0
tokens: 18500 ctokens: 18500
class htb 1:10 parent 1:1 leaf 10: prio 1 quantum 62500 rate 625000Bps ceil 1250000Bps burst
1600B/8 mpu 0B overhead 0B cburst 1600B/8 mpu 0B overhead 0B level 0 buffer [00009c40]
cbuffer [00004e20]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
rate 0Bps 0pps backlog 0B 0p
lended: 0 borrowed: 0 giants: 0
tokens: 40000 ctokens: 20000
class htb 1:20 parent 1:1 leaf 20: prio 1 quantum 37500 rate 375000Bps ceil 750000Bps burst
1599B/8 mpu 0B overhead 0B cburst 1599B/8 mpu 0B overhead 0B level 0 buffer [0001046a]
cbuffer [00008235]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
rate 0Bps 0pps backlog 0B 0p
lended: 0 borrowed: 0 giants: 0
tokens: 66666 ctokens: 33333
class htb 1:30 parent 1:1 leaf 30: prio 1 quantum 25000 rate 250000Bps ceil 625000Bps burst
1600B/8 mpu 0B overhead 0B cburst 1600B/8 mpu 0B overhead 0B level 0 buffer [000186a0]
cbuffer [00009c40]
Sent 11709 bytes 69 pkt (dropped 0, overlimits 0 requeues 0)
rate 226Bps 2pps backlog 0B 0p
lended: 66 borrowed: 3 giants: 0
tokens: 92500 ctokens: 37000
class red 20:1 parent 20:0
# diagnose netlink intf-qdisc list port1
qdisc htb 1: root refcnt 5 r2q 10 default 30 direct_packets_stat 0 ver 3.17
Sent 18874 bytes 109 pkt (dropped 0, overlimits 5 requeues 0)
backlog 0B 0p
qdisc pfifo 10: parent 1:10 refcnt 1 limit 1000p
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0B 0p
qdisc red 20: parent 1:20 refcnt 1 limit 4000000B min 300000B max 1000000B ewma 9 Plog 23
Scell_log 20 flags 0
FortiOS 6.4.2 Administration Guide 990
Fortinet Inc.
Policy and Objects
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0B 0p
marked 0 early 0 pdrop 0 other 0
qdisc pfifo 30: parent 1:30 refcnt 1 limit 1000p
Sent 18874 bytes 109 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0B 0p
Marking QA traffic with a different DSCP
This second example shows how to mark QA traffic with a different DSCP according to real-time traffic speed.
To configure the firewall address:
config firewall address
edit QA_team
set subnet 10.1.100.0/24
next
end
To configure the firewall shaper traffic shaper:
config firewall shaper traffic-shaper
edit "500k-1000k-1500k"
set guaranteed-bandwidth 500
set maximum-bandwidth 1500
set diffserv enable
set dscp-marking-method multi-stage
set exceed-bandwidth 1000
set exceed-dscp 111000
set maximum-dscp 111111
set diffservcode 100000
next
end
config firewall shaping-policy
edit QA_team
set service "ALL"
set dstintf port1
set traffic-shaper "500k-1000k-1500k"
set traffic-shaper-reverse "500k-1000k-1500k"
set srcaddr "QA_team"
set dstaddr "all"
next
end
FortiOS 6.4.2 Administration Guide 991
Fortinet Inc.
Security Profiles
This section contains information about configuring FortiGate security features, including:
l Inspection modes on page 992
l Antivirus on page 997
l Web filter on page 1032
l DNS filter on page 1067
l Application control on page 1088
l Intrusion prevention on page 1099
l File filter on page 1106
l Email filter on page 1112
l Data leak prevention on page 1118
l VoIP solutions on page 1130
l ICAP on page 1141
l Web application firewall on page 1147
l SSL & SSH Inspection on page 1151
l Custom signatures on page 1159
l Overrides on page 1164
If you are unable to view a security profile feature, go to System > Feature Visibility to enable
it.
Inspection modes
FortiOS supports flow-based and proxy-based inspection in firewall policies. You can select the inspection mode when
configuring a policy.
Flow-based inspection takes a snapshot of content packets and uses pattern matching to identify security threats in the
content.
Proxy-based inspection reconstructs content that passes through the FortiGate and inspects the content for security
threats.
Certain security profiles allows users to display flow-based or proxy-based feature sets.
This following topics provide information about inspection modes for various security profile features:
l Flow mode inspection (default mode) on page 993
l Proxy mode inspection on page 993
l Inspection mode feature comparison on page 995
FortiOS 6.4.2 Administration Guide 992
Fortinet Inc.
Security Profiles
Flow mode inspection (default mode)
When a firewall policy’s inspection mode is set to flow, traffic flowing through the policy will not be buffered by the
FortiGate. Unlike proxy mode, the content payload passing through the policy will be inspected on a packet by packet
basis with the very last packet held by the FortiGate until the scan returns a verdict. If a violation is detected in the traffic,
a reset packet is issued to the receiver, which terminates the connection, and prevents the payload from being sent
successfully.
Flow-based inspection identifies and blocks security threats in real time as they are identified. All applicable flow-based
security modules are applied simultaneously in one single pass, using Direct Filter Approach (DFA) pattern matching to
identify possible attacks or threats. Pattern matching is offloaded and accelerated by CP8 or CP9 processors.
Flow-based inspection typically requires lower processing resources than proxy-based inspection and does not change
packets, unless a threat is found and packets are blocked.
Use case
It is recommended that flow inspection is applied to policies that prioritize traffic throughput, such as allowing
connections to be made towards a streaming or file server.
You have an application server which accepts connections from users for the daily quiz show app, HQ. Each HQ session
sees 500,000+ participants, and speed is very important because participants have less than 10 seconds to answer the
quiz show questions.
In this scenario, a flow inspection policy is recommended to prioritize throughput. The success of the application
depends on providing reliable service for large numbers of concurrent users. We will apply an IPS sensor to this policy to
protect the server from external DOS attacks.
Proxy mode inspection
When a firewall policy’s inspection mode is set to proxy, traffic flowing through the policy will be buffered by the FortiGate
for inspection. This means that the packets for a file, email message, or web page will be held by the FortiGate until the
entire payload is inspected for violations (virus, spam, or malicious web links). After FortiOS has finished the inspection,
the payload is either released to the destination (if traffic is clean) or dropped and replaced with a replacement message
(if traffic contains violations).
To optimize inspection, the policy can be configured to block or ignore files or messages that exceed a certain size. To
prevent the receiving end user from timing out, client comforting can be applied, which allows small portions of the
payload to be sent while it is undergoing inspection.
FortiOS 6.4.2 Administration Guide 993
Fortinet Inc.
Security Profiles
Proxy mode provides the most thorough inspection of the traffic; however, its thoroughness sacrifices performance,
making its throughput slower than that of a flow-mode policy. Under normal traffic circumstances, the throughput
difference between a proxy-based and flow-based policy is not significant.
Use case
We want traffic inspection to be as thorough as possible to avoid any data leaks from exiting the LAN and any malicious
content from entering it.
The following scenarios demonstrate common use cases for proxy inspection.
Scenario 1
Your organization deals with sensitive data on a regular basis and a data leak would significantly harm your business. At
the same time, you wish to protect your employees from malicious content, such as viruses and phishing emails, which
could be used to gain access to your network and the sensitive data on your systems.
In this scenario, a proxy inspection policy is recommended to prioritize network security. We want traffic inspection to be
as thorough as possible to avoid any data leaks from exiting the LAN and any malicious content from entering it. On this
policy, we will apply the virus filter, DLP filter, Web Filter, and email filter all operating in proxy mode.
FortiOS 6.4.2 Administration Guide 994
Fortinet Inc.
Security Profiles
Scenario 2
You have a corporate mail server in your domain, which is used by your employees for everyday business activities. You
want to protect your employees from phishing emails and viruses. At the same time, you want to also protect your web
servers from external attacks.
In this scenario, a proxy inspection policy is recommended to prioritize the safety of employee emails. Applying the
antivirus and email filter in this mode allows us to most reliably filter out any malware and spam emails received by the
mail servers via SMTP or MAPI. The IPS sensor can be used to prevent DOS attacks on the mail servers.
Inspection mode feature comparison
The following table shows which UTM profile can be configured on a flow mode or proxy mode inspection policy.
Some UTM profiles are hidden in the GUI and can only be configured using the CLI. To configure profiles in a firewall
policy in CLI, enable the utm-status setting.
Some profiles might have feature differences between flow-based and proxy-based Inspection. From the GUI and CLI,
you can set the Feature set option to be Flow-based or Proxy-based to display only the settings for that mode.
Flow Mode Inspection Policy Proxy Mode Inspection Policy Feature
set
UTM Profile GUI CLI GUI CLI option
AntiVirus Yes Yes Yes Yes GUI/CLI
Web Filter Yes Yes Yes Yes GUI/CLI
DNS Filter Yes Yes Yes Yes N/A
Application Control Yes Yes Yes Yes N/A
Intrusion Prevention System Yes Yes Yes Yes N/A
File Filter Yes Yes Yes Yes GUI/CLI
Email Filter Yes Yes Yes Yes GUI/CLI
Data Leak Prevention No Yes No Yes CLI
VoIP Yes Yes Yes Yes N/A
FortiOS 6.4.2 Administration Guide 995
Fortinet Inc.
Security Profiles
Flow Mode Inspection Policy Proxy Mode Inspection Policy Feature
set
UTM Profile GUI CLI GUI CLI option
ICAP No No Yes Yes N/A
Web Application Firewall No No Yes Yes N/A
SSL/SSH Inspection Yes Yes Yes Yes N/A
The following sections outline differences between flow-based and proxy-based inspection for a security profile.
Feature comparison between Antivirus inspection modes
The following table indicates which Antivirus features are supported by their designated scan modes.
Part1 Replacement Content Mobile Virus Sandbox NAC
Message Disarm Malware Outbreak Inspection Quarantine
Proxy Yes Yes Yes Yes Yes Yes
Flow Yes* No Yes Yes Yes Yes
*IPS Engine caches the URL and a replacement message is presented after the second attempt.
Part 2 Archive Emulator Client Infection Heuristics Treat
Blocking Comforting Quarantine EXE as
Virus
Proxy Yes Yes Yes Yes (1) Yes Yes (2)
Flow Yes Yes No Yes Yes Yes (2)
1. Only available on FortiGate models with HDD or when FortiAnalyzer or FortiGate Cloud is connected and enabled.
2. Only applies to inspection on IMAP, POP3, SMTP, and MAPI protocols.
Feature comparison between Web Filter inspection modes
The following table indicates which Web Filter features are supported by their designated inspection modes.
FortiGuard Category Override Search Static Rating Proxy Web
Category- Usage Blocked Engines URL Filter Option Option Profile
Based Quota Categories Override
Filter
Proxy Yes Yes Yes Yes Yes Yes Yes Yes
Flow Yes (1) No Yes (2) No Yes Yes Limited No
(3)
1. Local Category and Remote Category filters do not support the warning and authenticate actions.
2. Local Category and Remote Category filters cannot be overridden.
FortiOS 6.4.2 Administration Guide 996
Fortinet Inc.
Security Profiles
3. Only HTTP POST Action is supported.
Feature comparison between Email Filter inspection modes
The following tables indicate which Email Filters are supported by the specified inspection modes for local filtering and
FortiGuard-assisted filtering.
Local Filtering Banned Block/Allow HELO/ EHLO Return DNSBL/ MIME
Word List DNS Check Address ORBL Header
Check DNS Check Check Check
Proxy Yes Yes Yes Yes Yes Yes
Flow Yes Yes No No No Yes
FortiGuard- Phishing Anti-Spam Submit Spam Spam Email Spam
Assisted Filtering URL Check Block List to FortiGuard Checksum URL Check
Check Check
Proxy Yes Yes Yes Yes Yes
Flow No No No No No
Feature comparison between DLP inspection modes
The following table indicates which DLP filters are supported by their designated inspection modes.
Credit SSN Filter Regex File- File- Fingerprint Watermark Encrypted File-
Card Filter Type Pattern Filter Filter Filter Size
Filter Filter Filter Filter
Proxy Yes Yes Yes Yes Yes Yes Yes Yes Yes
Flow Yes Yes Yes Yes Yes No No Yes Yes*
*File-size filtering only works if file size is present in the protocol exchange.
Antivirus
FortiOS offers the unique ability to implement both flow-based and proxy-based antivirus concurrently, depending on the
traffic type, users, and locations. Flow-based antivirus offers higher throughput performance.
FortiOS includes two preloaded antivirus profiles:
l default
l wifi-default
You can customize these profiles, or you can create your own to inspect certain protocols, remove viruses, analyze
suspicious files with FortiSandbox, and apply botnet protection to network traffic. Once configured, you can add the
antivirus profile to a firewall policy.
FortiOS 6.4.2 Administration Guide 997
Fortinet Inc.
Security Profiles
This functionality requires a subscription to FortiGuard Antivirus.
Protocol comparison between antivirus inspection modes
The following table indicates which protocols can be inspected by the designated antivirus scan modes.
HTTP FTP IMAP POP3 SMTP NNTP MAPI CIFS SSH
Proxy Yes Yes Yes Yes Yes Yes Yes Yes* Yes
Flow Yes Yes Yes Yes Yes Yes No Yes No
* Proxy mode antivirus inspection on CIFS protocol has the following limitations:
l Cannot detect infections within some archive files.
l Cannot detect oversized files.
Other antivirus differences between inspection modes
Starting from 6.4.0, the scan mode option is no longer available for flow-based AV.
This means that AV no longer exclusively uses the default or legacy scan modes when handling traffic on flow-based
firewall policies. Instead, AV in flow-based policies uses a hybrid of the two scan modes. Flow AV may use a pre-filtering
database for malware detection in some circumstances as opposed to the full AV signature database in others. The scan
method is determined by the IPS engine algorithm that is based on the type of file being scanned.
In contrast, proxy mode maintains the scan mode option, which can be toggled between default or legacy mode. In
default mode, the WAD daemon uses a stream-based approach, while legacy mode disables this stream-based
approach. Proxy default scan-mode uses pre-scanning and stream-based scanning for HTTP traffic.
Stream-based scanning provides the following AV improvements:
l Archive files (ZIP, GZIP, BZIP2, TAR, ISO) that exceed the oversize limit are uncompressed and scanned for
infections.
l The contents of large archive files are scanned without having to buffer the entire file.
l Small files are scanned locally by the WAD daemon if only AV scanning is needed in the policy.
l File filtering on HTTP/HTTPS is handled locally by the WAD daemon.
This means that the overall memory usage is optimized when an archive file is scanned, and better security is achieved
by scanning archives that would otherwise be bypassed.
However, stream-based scanning has limitations on the more complex features that it can scan. For the following
features, traffic will be automatically handed off to the scanunit daemon for scanning (as in the case of legacy mode):
l Heuristic AV scan
l DLP
l Quarantine
l FortiGuard outbreak prevention and external block list
l Content disarm
FortiOS 6.4.2 Administration Guide 998
Fortinet Inc.
Security Profiles
To configure the scan mode:
config antivirus profile
edit <name>
set feature-set proxy
...
set scan-mode {default | legacy}
next
end
The following topics provide information about antivirus profiles:
l Content disarm and reconstruction for antivirus on page 1000
l FortiGuard outbreak prevention on page 1002
l External malware block list for antivirus on page 1004
l Checking flow antivirus statistics on page 1007
l CIFS support on page 1009
l Databases on page 999
The following topics provide information about sandbox inspection with antivirus:
l Using FortiSandbox appliance with antivirus on page 1014
l Using FortiSandbox Cloud with antivirus on page 1023
Databases
The AntiVirus scanning engine uses a virus signatures database to record the unique attributes of each infection. The
AntiVirus scan searches for these signatures and when one is discovered, the FortiGate unit determines if the file is
infected and takes action.
All FortiGate units have the normal AntiVirus signature database. Some models have additional databases that you can
use. The database you use depends on your network and security needs, and on your FortiGate model.
The extended virus definitions database is the default setting and provides comprehensive antivirus protection. Low end
FortiGate models cannot support the extreme database and the use-extreme-db setting is only available on models
that support the extreme database.
Extended This is the default setting. This database includes currently spreading viruses, as
determined by the FortiGuard Global Security Research Team, plus recent
viruses that are no longer active. These viruses may have been spreading within
the last year but have since nearly or completely disappeared.
Extreme Includes the extended database, plus a large collection of zoo viruses. These are
viruses that have not spread in a long time and are largely dormant. Some zoo
viruses might rely on operating systems and hardware that are no longer widely
used.
To change the antivirus database:
config antivirus settings
set use-extreme-db {enable | disable}
end
FortiOS 6.4.2 Administration Guide 999
Fortinet Inc.
Security Profiles
Content disarm and reconstruction for antivirus
Content disarm and reconstruction (CDR) allows the FortiGate to sanitize Microsoft Office documents and PDF files by
removing active content, such as hyperlinks, embedded media, javascript, macros, and so on (disarm) from the files
without affecting the integrity of its textual content (reconstruction). It allows network admins to protect their users from
malicious document files.
l CDR can be performed on Microsoft Office document and PDF files, including those that are in ZIP archives.
l CDR is supported on HTTP, SMTP, POP3, IMAP. SMTP splice and client-comfort mode are not supported.
l CDR does not support flow-based inspection modes.
l Local disk CDR quarantine can be used on FortiGate models that contain a hard disk or disks.
Files processed by CDR can have the original copy quarantined on the FortiGate, allowing administrators to observe
them. The original copies can also be obtained in the event of a false positive.
Network topology example
Configuring the feature
In order to configure antivirus to work with CDR, you must enable CDR on your antivirus profile, set the quarantine
location, and then fine-tune the CDR detection parameters.
To enable CDR on your antivirus profile:
1. Go to Security Profiles > AntiVirus.
2. Edit an antivirus profile, or create a new one.
FortiOS 6.4.2 Administration Guide 1000
Fortinet Inc.
Security Profiles
3. Enable the toggle for Content Disarm and Reconstruction under APT Protection Options.
To set a quarantine location:
1. Go to Security Profiles > AntiVirus.
2. Edit an antivirus profile, or create a new one.
3. Select a quarantine location from the available options: Discard, File Quarantine, or FortiSandbox.
Discard The default setting, which discards the original document file.
File Quarantine Saves the original document file to disk (if possible) or a connected
FortiAnalyzer based on the FortiGate's log settings, visible through Config
Global > Config Log FortiAnalyzer Setting.
FortiSandbox Saves the original document file to a connected FortiSandbox.
4. Click Apply.
To fine-tune CDR detection parameters in the CLI:
l Select which active content to detect/process:
By default, all active office and PDF content types are enabled. To fine-tune CDR to ignore certain content, you
must disable that particular content parameter. The example below configures the CDR to ignore Microsoft Office
macros.
config antivirus profile
edit av
config content-disarm
set office-macro disable
end
next
end
l Detect but do not modify active content:
By default, CDR will disarm any detected documents containing active content. To prevent CDR from disarming
documents, you can set it to operate in detect-only mode. To do this, the option detect-only must be enabled.
config antivirus profile
edit av
config content-disarm
FortiOS 6.4.2 Administration Guide 1001
Fortinet Inc.
Security Profiles
set detect-only enable
end
next
end
l Disable the CDR cover page:
By default, a cover page will be attached to the file's content when the file has been processed by CDR. To disable
the cover page, the cover-page parameter needs to be disabled.
config antivirus profile
edit av
config content-disarm
set cover-page disable
end
next
end
FortiGuard outbreak prevention
FortiGuard Virus Outbreak Protection Service (VOS) allows the FortiGate antivirus database to be subsidized with third-
party malware hash signatures curated by FortiGuard. The hash signatures are obtained from FortiGuard's Global
Threat Intelligence database. The antivirus database queries FortiGuard with the hash of a scanned file. If FortiGuard
returns a match, the scanned file is deemed to be malicious.
FortiGuard VOS can be used in both proxy-based and flow-based policy inspections across all supported protocols.
The FortiGate must be registered with a valid FortiGuard outbreak prevention license.
To verify FortiGuard antivirus license information:
1. Go to System > FortiGuard and locate the Outbreak Prevention section in the table.
2. See the instructions in the video, How to Purchase or Renew FortiGuard Services, if required.
FortiOS 6.4.2 Administration Guide 1002
Fortinet Inc.
Security Profiles
To enable FortiGuard outbreak prevention:
1. Go to Security Profiles > AntiVirus.
2. Edit an antivirus profile, or create a new one.
3. Under Virus Outbreak Protection, enable Use FortiGuard Outbreak Prevention Database.
4. Click OK.
To verify FortiGuard antivirus license information:
# diagnose debug rating
Locale : english
Service : Web-filter
Status : Enable
License : Contract
Service : Antispam
Status : Disable
Service : Virus Outbreak Prevention
Status : Enable
License : Contract
-=- Server List (Tue Feb 19 16:36:15 2019) -=-
IP Weight RTT Flags TZ Packets Curr Lost Total Lost
Updated Time
192.168.100.185 -218 2 DI -8 113 0 0 Tue Feb
19 16:35:55 2019
To enable all scanunit debug categories:
# diagnose sys scanunit debug all
Set meta-category: all(0xffffffff)
Enabled categories(0xffffffff): daemon job quarantine analytics outbreak-prevention dlp
antispam file-filter
# diagnose debug enable
# su 4739 open
su 4739 req vfid 1 id 1 ep 0 new request, size 313, policy id 1, policy type 0
su 4739 req vfid 1 id 1 ep 0 received; ack 1, data type: 0
su 4739 job 1 request info:
su 4739 job 1 client 10.1.100.11:39412 server 172.16.200.44:80
su 4739 job 1 object_name 'zhvo_test.com'
su 4739 file-typing NOT WANTED options 0x0 file_filter no
su 4739 enable databases 0b (core mmdb extended)
su 4739 job 1 begin http scan
su 4739 scan file 'zhvo_test.com' bytes 68
su 4739 job 1 outbreak-prevention scan, level 0, filename 'zhvo_test.com'
su 4739 scan result 0
su 4739 job 1 end http scan
su 4739 job 1 inc pending tasks (1)
su 4739 not wanted for analytics: analytics submission is disabled (m 0 r 0)
su 4739 job 1 suspend
su 4739 outbreak-prevention recv error
FortiOS 6.4.2 Administration Guide 1003
Fortinet Inc.
Security Profiles
su 4739 ftgd avquery id 0 status 1
su 4739 job 1 outbreak-prevention infected entryid=0
su 4739 report AVQUERY infection priority 1
su 4739 insert infection AVQUERY SUCCEEDED loc (nil) off 0 sz 0 at index 0 total infections
1 error 0
su 4739 job 1 dec pending tasks 0
su 4739 job 1 send result
su 4739 job 1 close
su 4739 outbreak-prevention recv error
External malware block list for antivirus
The external malware block list is a new feature introduced in FortiOS 6.2.0, which falls under the umbrella of outbreak
prevention.
This feature provides another means of supporting the AV Database by allowing users to add their own malware
signatures in the form of MD5, SHA1, and SHA256 hashes.
This feature provides a mechanism for antivirus to retrieve an external malware hash list from a remote server and polls
the hash list every n minutes for updates.
Support and limitations
Malware detection using the external malware block list can be used in both proxy-based and flow-based policy
inspections.
Just like FortiGuard outbreak prevention, external dynamic block list is not supported in AV quick scan mode.
Using different types of hashes simultaneously may slow down the performance of malware scanning. For this reason,
users are recommended to only using one type of hash (either MD5, SHA1, or SHA256), not all three simultaneously.
Network topology example
Configuring the feature
To configure antivirus to work with external block list:
1. Create the malware hash list
The malware hash list follows a strict format in order for its contents to be valid. Malware hash signature entries
must be separated into each line. A valid signature needs to follow the format below:
# MD5 Entry with hash description
aa67243f746e5d76f68ec809355ec234 md5_sample1
# SHA1 Entry with hash description
FortiOS 6.4.2 Administration Guide 1004
Fortinet Inc.
Security Profiles
a57983cb39e25ab80d7d3dc05695dd0ee0e49766 sha1_sample2
# SHA256 Entry with hash description
ae9bc0b4c5639d977d720e4271da06b50f7c60d1e2070e9c75cc59ab30e49379 sha256_sample1
# Entry without hash description
0289b0d967cb7b1fb1451339c7b9818a621903090e0020366ab415c549212521
# Invalid entries
7688499dc71b932feb126347289c0b8a_md5_sample2
7614e98badca10b5e2d08f8664c519b7a906fbd5180ea5d04a82fce9796a4b87sha256_sample3
2. Configure the external malware block list source:
a. Go to Global > Security Fabric > External Connectors and click Create New.
b. Select Malware Hash.
c. Fill out the fields as shown. The URI must point to the malware hash list on the remote server.
d. Click OK.
The malware hash source object is now created.
3. To view entries inside the malware block list, hover the pointer over the malware hash card and click the View
Entries button.
FortiOS 6.4.2 Administration Guide 1005
Fortinet Inc.
Security Profiles
The malware hash threat feed displays (hash_list):
4. Enable the external malware block list in the antivirus profile:
config antivirus profile
edit <av_profile>
config outbreak-prevention
set external-blocklist enable
end
next
end
Antivirus is now ready to use the external malware block list.
Diagnostics and debugging
Check if the scanunit daemon has updated itself with the external hashes:
FGT_PROXY # config global
FGT_PROXY (global) # diagnose sys scanunit malware-list list
md5 'aa67243f746e5d76f68ec809355ec234' profile 'hash_list' description 'md5_sample1'
sha1 'a57983cb39e25ab80d7d3dc05695dd0ee0e49766' profile 'hash_list' description 'sha1_
sample2'
sha256 '0289b0d967cb7b1fb1451339c7b9818a621903090e0020366ab415c549212521' profile 'hash_
list' description ''
sha256 'ae9bc0b4c5639d977d720e4271da06b50f7c60d1e2070e9c75cc59ab30e49379' profile 'hash_
list' description 'sha256_sample1'
FortiOS 6.4.2 Administration Guide 1006
Fortinet Inc.
Security Profiles
Checking flow antivirus statistics
This feature provides a flow antivirus statistics check, and an API for SNMP to get AV statistics.
Two CLI commands are used to show and clear the antivirus statistics:
diagnose ips av stats show
diagnose ips av stats clear
This example uses the following topology:
To check flow antivirus statistics:
1. Create an antivirus profile:
config antivirus profile
edit "av-test"
config http
set options scan avmonitor
end
config ftp
set options scan quarantine
end
next
end
2. Enable the profile on a firewall policy:
config firewall policy
edit 1
set name "policy1"
set srcintf "port2"
set dstintf "port1"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set utm-status enable
set fsso disable
set av-profile "av-test"
set ssl-ssh-profile "custom-deep-inspection"
set nat enable
next
end
3. On the client PC, download the EICAR Standard Anti-Virus Test File via HTTP.
FortiOS 6.4.2 Administration Guide 1007
Fortinet Inc.
Security Profiles
4. Check the antivirus statistics on the FortiGate. As the action is set to monitor for HTTP, HTTP virus detected is
increased by 1:
# diagnose ips av stats show
AV stats:
HTTP virus detected: 1
HTTP virus blocked: 0
SMTP virus detected: 0
SMTP virus blocked: 0
POP3 virus detected: 0
POP3 virus blocked: 0
IMAP virus detected: 0
IMAP virus blocked: 0
NNTP virus detected: 0
NNTP virus blocked: 0
FTP virus detected: 0
FTP virus blocked: 0
SMB virus detected: 0
SMB virus blocked: 0
5. On the client PC, download the EICAR file via FTP.
6. Check the antivirus statistics on the FortiGate. As the action is set to quarantine for FTP, FTP virus detected
and FTP virus blocked are both increased by 1:
# diagnose ips av stats show
AV stats:
HTTP virus detected: 1
HTTP virus blocked: 0
SMTP virus detected: 0
SMTP virus blocked: 0
POP3 virus detected: 0
POP3 virus blocked: 0
IMAP virus detected: 0
IMAP virus blocked: 0
NNTP virus detected: 0
NNTP virus blocked: 0
FTP virus detected: 1
FTP virus blocked: 1
SMB virus detected: 0
SMB virus blocked: 0
7. Check the antivirus statistics using snmpwalk:
root:~# snmpwalk -c public -v 1 10.1.100.6 1.3.6.1.4.1.12356.101.8.2.1.1
iso.3.6.1.4.1.12356.101.8.2.1.1.1.1 = Counter32: 2 (fgAvVirusDetected)
iso.3.6.1.4.1.12356.101.8.2.1.1.2.1 = Counter32: 1 (fgAvVirusBlocked)
iso.3.6.1.4.1.12356.101.8.2.1.1.3.1 = Counter32: 1 (fgAvHTTPVirusDetected)
iso.3.6.1.4.1.12356.101.8.2.1.1.4.1 = Counter32: 0
iso.3.6.1.4.1.12356.101.8.2.1.1.5.1 = Counter32: 0
iso.3.6.1.4.1.12356.101.8.2.1.1.6.1 = Counter32: 0
iso.3.6.1.4.1.12356.101.8.2.1.1.7.1 = Counter32: 0
iso.3.6.1.4.1.12356.101.8.2.1.1.8.1 = Counter32: 0
iso.3.6.1.4.1.12356.101.8.2.1.1.9.1 = Counter32: 0
iso.3.6.1.4.1.12356.101.8.2.1.1.10.1 = Counter32: 0
iso.3.6.1.4.1.12356.101.8.2.1.1.11.1 = Counter32: 1 (fgAvFTPVirusDetected)
iso.3.6.1.4.1.12356.101.8.2.1.1.12.1 = Counter32: 1 (fgAvFTPVirusBlocked)
iso.3.6.1.4.1.12356.101.8.2.1.1.13.1 = Counter32: 0
iso.3.6.1.4.1.12356.101.8.2.1.1.14.1 = Counter32: 0
FortiOS 6.4.2 Administration Guide 1008
Fortinet Inc.
Security Profiles
iso.3.6.1.4.1.12356.101.8.2.1.1.15.1 = Counter32: 0
iso.3.6.1.4.1.12356.101.8.2.1.1.16.1 = Counter32: 0
iso.3.6.1.4.1.12356.101.8.2.1.1.17.1 = Counter32: 0
iso.3.6.1.4.1.12356.101.8.2.1.1.18.1 = Counter32: 0
iso.3.6.1.4.1.12356.101.8.2.1.1.19.1 = Counter32: 0
iso.3.6.1.4.1.12356.101.8.2.1.1.20.1 = Counter32: 0
iso.3.6.1.4.1.12356.101.8.2.1.1.21.1 = Counter32: 0
iso.3.6.1.4.1.12356.101.8.2.1.1.22.1 = Counter32: 0
8. Optionally, reset the antivirus statistics to zero:
diagnose ips av stats clear
CIFS support
Antivirus scanning on Common Internet File System (CIFS) traffic is supported in flow-based and proxy-based
inspection. The file filter profile handles the configuration of file filtering on CIFS. The antivirus profile handles the
antivirus configuration for CIFS scanning.
File filtering for CIFS is performed by inspecting the first 4 KB of the file to identify the file's magic number. If a match
occurs, CIFS file filtering prevents the CIFS command that contains that file from running. The file filter functions
differently for un-encrypted and encrypted CIFS traffic:
l For un-encrypted CIFS traffic, the standalone file filter works in flow and proxy mode.
l For encrypted CIFS traffic, the CIFS profile must be enabled in the firewall policy because the SMB server’s
credential settings are still be configured in CIFS profile. Using the standalone file filter only works in proxy mode.
For a CIFS profile to be available for assignment in a policy, the policy must use proxy inspection mode. See Proxy mode
inspection on page 993 for details. Note that in proxy inspection mode, special condition archive files (encrypted,
corrupted, mailbomb, and so on) marked by the antivirus engine are blocked automatically.
Messages that are compressed with LZNT1, LZ77, and LZ77+Huffman algorithms can be scanned in proxy mode.
Configure file-type filtering and antivirus scanning on CIFS traffic
To configure file-type filtering and antivirus scanning on CIFS traffic:
1. Configure a CIFS domain controller on page 1009
2. Configure a CIFS profile on page 1010
3. Configure an antivirus profile on page 1012
Configure a CIFS domain controller
The domain controller must be configured when CIFS traffic is encrypted. The configuration tells the FortiGate the
network location of the domain controller and the superuser credentials.
To configure the CIFS domain controller:
config credential-store domain-controller
edit "SERVER_NAME"
set hostname "host"
set domain-name "EXAMPLE.COM"
set username "admin-super"
FortiOS 6.4.2 Administration Guide 1009
Fortinet Inc.
Security Profiles
set password *********
set ip 172.16.201.40
next
end
Configure a CIFS profile
To create a CIFS profile, configure the server credential type and create a file filter profile.
Set the CIFS server credential type
The CIFS server credential type can be none, credential-replication, or credential-keytab.
none
The CIFS profile assumes the CIFS traffic is unencrypted. This is the default value.
config firewall profile-protocol-options
edit "cifs"
config cifs
set server-credential-type none
end
next
end
credential-replication
To decrypt CIFS traffic, FortiOS obtains the session key from the domain controller by logging in to the superuser
account. The domain controller must be configured.
config firewall profile-protocol-options
edit "cifs"
config cifs
set server-credential-type credential-replication
set domain-controller "SERVER_NAME"
end
next
end
Variable Description
domain-controller <string> The previously configured domain to decrypt CIFS traffic for.
credential-keytab
To decrypt CIFS traffic, FortiOS uses a series of keytab values. This method is used when the SMB connection is
authenticated by Kerberos. Keytab entries must be configured, and are stored in FortiOS in plaintext.
config firewall profile-protocol-options
edit "cifs"
config cifs
set server-credential-type credential-keytab
config server-keytab
edit "keytab1"
set keytab
FortiOS 6.4.2 Administration Guide 1010
Fortinet Inc.
Security Profiles
"BQIAAABFAAEAC0VYQU1QTEUuQ09NAAdleGFtcGxlAAAAAVUmAlwBABIAILdV5P6NXT8RrTvapcMJQxDYCjRQiD0Bzxh
wS9h0VgyM"
next
end
end
next
end
Variable Description
keytab <keytab> Base64 encoded keytab file containing the credentials of the server.
Configure CIFS file filtering
Multiple rules can be added to a file filter profile. See File filter on page 1106.
To configure a file filter for CIFS traffic:
config file-filter profile
edit "cifs"
set comment "block zip files on unencrypted cifs traffic"
set feature-set flow
set replacemsg-group ''
set log enable
config rules
edit "rule1"
set protocol cifs
set action block
set direction any
set password-protected any
set file-type zip
next
end
next
end
Variable Description
comment <string> A brief comment describing the entry.
feature-set {flow | proxy} Flow or proxy mode feature set (default = flow).
replacemsg-group <string> Replacement message group.
log {enable | disable} Enable/disable file filter logging (default = enable).
scan-archive-contents [enable | Enable/disable scanning of archive contents (default = enable).
disable]
protocol {http ftp smtp imap pop3 Filter based on the specified protocol(s).
mapi cifs ssh}
action {log-only | block} The action to take for matched files:
l log-only: Allow the content and write a log message (default).
l block: Block the content and write a log message.
FortiOS 6.4.2 Administration Guide 1011
Fortinet Inc.
Security Profiles
Variable Description
direction {incoming | outgoing | Match files transmitted in the session's originating (incoming) and/or reply
any} (outgoing) direction (default = any).
password-protected [yes | any] Match only password-protected files (yes) or any file (default = any).
file-type <file_type> The file types to be matched. See Supported file types on page 1110 for details.
Configure an antivirus profile
The antivirus profile handles the antivirus configuration for CIFS scanning.
To configure an antivirus profile:
config antivirus profile
edit "av"
...
config cifs
set options {scan avmonitor quarantine}
set archive-block {encrypted corrupted partiallycorrupted multipart nested
mailbomb fileslimit timeout unhandled}
set archive-log {encrypted corrupted partiallycorrupted multipart nested
mailbomb fileslimit timeout unhandled}
set emulator {enable | disable}
set outbreak-prevention {disabled | files | full-archive}
end
next
end
Variable Description
options {scan avmonitor Enable/disable CIFS antivirus scanning, monitoring, and quarantine.
quarantine}
archive-block {encrypted Select the archive types to block:
corrupted partiallycorrupted l encrypted: Block encrypted archives.
multipart nested mailbomb l corrupted: Block corrupted archives.
fileslimit timeout unhandled} l partiallycorrupted: Block partially corrupted archives.
l multipart: Block multipart archives.
l nested: Block nested archives.
l mailbomb: Block mail bomb archives.
l fileslimit: Block exceeded archive files limit.
l timeout: Block scan timeout.
l unhandled: Block archives that FortiOS cannot open.
archive-log {encrypted corrupted Select the archive types to log:
partiallycorrupted multipart l encrypted: Log encrypted archives.
nested mailbomb fileslimit l corrupted: Log corrupted archives.
timeout unhandled} l partiallycorrupted: Log partially corrupted archives.
l multipart: Log multipart archives.
l nested: Log nested archives.
FortiOS 6.4.2 Administration Guide 1012
Fortinet Inc.
Security Profiles
Variable Description
l mailbomb: Log mail bomb archives.
l fileslimit: Log exceeded archive files limit.
l timeout: Log scan timeout.
l unhandled: Log archives that FortiOS cannot open.
emulator {enable | disable} Enable/disable the virus emulator (default = enable).
outbreak-prevention {disabled | Enable the virus outbreak prevention service:
files | full-archive} l disabled: Disabled (default).
l files: Analyze files as sent, not the content of archives.
l full-archive: Analyze files, including the content of archives.
Log samples
File-type detection events generated by CIFS profiles are logged in the utm-cifs log category. Antivirus detection over
the CIFS protocol generates logs in the utm-virus category. See the FortiOS Log Message Reference for more
information.
Logs generated by CIFS profile file filter:
date=2019-03-28 time=10:39:19 logid="1800063001" type="utm" subtype="cifs" eventtype="cifs-
filefilter" level="notice" vd="vdom1" eventtime=1553794757 msg="File was detected by file
filter." direction="incoming" action="passthrough" service="CIFS" srcip=10.1.100.11
dstip=172.16.200.44 srcport=33372 dstport=445 srcintf="wan2" srcintfrole="wan"
dstintf="wan1" dstintfrole="wan" policyid=1 proto=16 profile="cifs" filesize="1154"
filename="virus\\test.png" filtername="2" filetype="png"
date=2019-03-28 time=10:39:12 logid="1800063001" type="utm" subtype="cifs" eventtype="cifs-
filefilter" level="notice" vd="vdom1" eventtime=1553794751 msg="File was detected by file
filter." direction="incoming" action="passthrough" service="CIFS" srcip=10.1.100.11
dstip=172.16.200.44 srcport=33370 dstport=445 srcintf="wan2" srcintfrole="wan"
dstintf="wan1" dstintfrole="wan" policyid=1 proto=16 profile="cifs" filesize="81975"
filename="virus\\screen.png" filtername="2" filetype="png"
date=2019-03-28 time=10:33:55 logid="1800063000" type="utm" subtype="cifs" eventtype="cifs-
filefilter" level="warning" vd="vdom1" eventtime=1553794434 msg="File was blocked by file
filter." direction="incoming" action="blocked" service="CIFS" srcip=10.1.100.11
dstip=172.16.200.44 srcport=33352 dstport=445 srcintf="wan2" srcintfrole="wan"
dstintf="wan1" dstintfrole="wan" policyid=1 proto=16 profile="cifs" filesize="28432"
filename="filetypes\\mpnotify.exe" filtername="3" filetype="exe"
date=2019-03-28 time=10:33:45 logid="1800063000" type="utm" subtype="cifs" eventtype="cifs-
filefilter" level="warning" vd="vdom1" eventtime=1553794424 msg="File was blocked by file
filter." direction="incoming" action="blocked" service="CIFS" srcip=10.1.100.11
dstip=172.16.200.44 srcport=33348 dstport=445 srcintf="wan2" srcintfrole="wan"
dstintf="wan1" dstintfrole="wan" policyid=1 proto=16 profile="cifs" filesize="96528"
filename="filetypes\\winmine.exe" filtername="3" filetype="exe"
Logs generated by AV profile for infections detected over CIFS:
date=2019-04-09 time=15:19:02 logid="0204008202" type="utm" subtype="virus"
eventtype="outbreak-prevention" level="warning" vd="vdom1" eventtime=1554848342519005401
FortiOS 6.4.2 Administration Guide 1013
Fortinet Inc.
Security Profiles
msg="Blocked by Virus Outbreak Prevention service." action="blocked" service="SMB"
sessionid=177 srcip=10.1.100.11 dstip=172.16.200.44 srcport=37444 dstport=445 srcintf="wan2"
srcintfrole="wan" dstintf="wan1" dstintfrole="wan" policyid=1 proto=6 direction="incoming"
filename="outbreak\\zhvo_test.com" quarskip="File-was-not-quarantined."
virus="503e99fe40ee120c45bc9a30835e7256fff3e46a" dtype="File Hash"
filehash="503e99fe40ee120c45bc9a30835e7256fff3e46a" filehashsrc="fortiguard" profile="av"
analyticssubmit="false" crscore=50 craction=2 crlevel="critical"
date=2019-04-09 time=15:18:59 logid="0211008192" type="utm" subtype="virus"
eventtype="infected" level="warning" vd="vdom1" eventtime=1554848339909808987 msg="File is
infected." action="blocked" service="SMB" sessionid=174 srcip=10.1.100.11
dstip=172.16.200.44 srcport=37442 dstport=445 srcintf="wan2" srcintfrole="wan"
dstintf="wan1" dstintfrole="wan" policyid=1 proto=6 direction="incoming"
filename="sample\\eicar.com" quarskip="File-was-not-quarantined." virus="EICAR_TEST_FILE"
dtype="Virus" ref="http://www.fortinet.com/ve?vn=EICAR_TEST_FILE" virusid=2172 profile="av"
analyticscksum="275a021bbfb6489e54d471899f7db9d1663fc695ec2fe2a2c4538aabf651fd0f"
analyticssubmit="false" crscore=50 craction=2 crlevel="critical"
Using FortiSandbox appliance with antivirus
Antivirus can use FortiSandbox to supplement its detection capabilities. In real-world situations, networks are always
under the threat of zero-day attacks.
Antivirus can submit potential zero-day viruses to FortiSandbox for inspection. Based on FortiSandbox's analysis, the
FortiGate can supplement its own antivirus database with FortiSandbox's database to detect files determined as
malicious or risky by FortiSandbox. This helps FortiGate antivirus detect zero-day viruses and malware whose
signatures are not found in the FortiGate antivirus database.
For more information, see FortiSandbox on page 148.
Support and limitations
l FortiSandbox can be used with antivirus in both proxy-based and flow-based inspection modes.
l With FortiSandbox enabled, full scan mode antivirus can do the following:
l Submit only suspicious files to FortiSandbox for inspection.
l Submit every file to FortiSandbox for inspection.
l Do not submit anything.
l Quick scan mode antivirus cannot submit suspicious files to FortiSandbox. It can only do the following:
l Submit every file to FortiSandbox for inspection.
l Do not submit anything.
FortiOS 6.4.2 Administration Guide 1014
Fortinet Inc.
Security Profiles
Network topology example
Configuring the feature
To configure antivirus to work with an external block list, the following steps are required:
1. Enable FortiSandbox on the FortiGate.
2. Authorize FortiGate on the FortiSandbox.
3. Enable FortiSandbox inspection.
4. Enable use of the FortiSandbox database.
To enable FortiSandbox on the FortiGate:
1. Go to Global > Security Fabric > Fabric Connectors and double-click the FortiSandbox card.
2. For status, click Enable.
3. For Type, click On-Premise.
4. Enter the IP address of the FortiSandbox, and enter an optional Notifier email.
5. At this point, clicking Test connectivity returns an unreachable status. This is expected, because the FortiGate is not
yet authorized by FortiSandbox.
6. Click OK to save the settings.
FortiOS 6.4.2 Administration Guide 1015
Fortinet Inc.
Security Profiles
To authorize FortiGate on the FortiSandbox:
1. In the FortiSandbox Appliance GUI, go to Scan Input > Device.
2. Use the FortiGate serial number to quickly locate the desired FortiGate and select the link icon to authorize the
FortiGate.
3. Enable the desired VDOM in the same manner.
4. The link icon changes from an open to closed link. This indicates that the FortiSandbox has authorized this
FortiGate.
FortiOS 6.4.2 Administration Guide 1016
Fortinet Inc.
Security Profiles
5. In the FortiGate GUI, go to Global > Security Fabric > Fabric Connectors.
6. Click Test connectivity. The FortiGate is now authorized and the status displays as Connected.
7. FortiSandbox options are now displayed in the AV Profile page.
FortiOS 6.4.2 Administration Guide 1017
Fortinet Inc.
Security Profiles
To enable FortiSandbox inspection:
1. Go to Security Profiles > AntiVirus.
2. Enable FortiSandbox inspection by selecting either Suspicious Files Only or All Supported Files.
3. Files can be excluded from being sent to FortiSandbox based on their file types by choosing from a list of supported
file types.
FortiOS 6.4.2 Administration Guide 1018
Fortinet Inc.
Security Profiles
4. Files can also be excluded from being sent to FortiSandbox by using wildcard patterns.
5. Click Apply.
To enable use of the FortiSandbox database:
1. Go to Security Profiles > AntiVirus
2. Enable Use FortiSandbox Database.
3. Click Apply.
FortiOS 6.4.2 Administration Guide 1019
Fortinet Inc.
Security Profiles
Diagnostics and Debugging
Debug on the FortiGate side
l Update daemon:
FGT_PROXY (global) # diagnose debug application quarantined -1
FGT_PROXY (global) # diagnose debug enable
quar_req_fsa_file()-890: fsa ext list new_version (1547781904)
quar_fsb_handle_quar()-1439: added a req-6 to fortisandbox-fsb5, vfid=1, oftp-name=[].
__quar_start_connection()-908: start server fortisandbox-fsb5-172.18.52.154 in vdom-1
[103] __ssl_cert_ctx_load: Added cert /etc/cert/factory/root_Fortinet_Factory.cer, root
ca Fortinet_CA, idx 0 (default)
[551] ssl_ctx_create_new_ex: SSL CTX is created
[578] ssl_new: SSL object is created
upd_cfg_extract_av_db_version[378]-version=06002000AVDB00201-00066.01026-1901301530
upd_cfg_extract_ids_db_version[437]-version=06002000NIDS02403-00014.00537-1901300043
upd_cfg_extract_ids_db_version[437]-version=06002000APDB00103-00006.00741-1512010230
upd_cfg_extract_ids_db_version[437]-version=06002000ISDB00103-00014.00537-1901300043
upd_cfg_extract_ibdb_botnet_db_version[523]-version=06002000IBDB00101-00004.00401-
1901281000
upd_cfg_extract_av_db_version[378]-version=06002000AVDB00201-00066.01026-1901301530
upd_cfg_extract_ids_db_version[437]-version=06002000NIDS02403-00014.00537-1901300043
upd_cfg_extract_ids_db_version[437]-version=06002000APDB00103-00006.00741-1512010230
upd_cfg_extract_ids_db_version[437]-version=06002000ISDB00103-00014.00537-1901300043
upd_cfg_extract_ibdb_botnet_db_version[523]-version=06002000IBDB00101-00004.00401-
1901281000
upd_cfg_extract_av_db_version[378]-version=06002000AVDB00201-00066.01026-1901301530
upd_cfg_extract_ids_db_version[437]-version=06002000NIDS02403-00014.00537-1901300043
upd_cfg_extract_ids_db_version[437]-version=06002000APDB00103-00006.00741-1512010230
upd_cfg_extract_ids_db_version[437]-version=06002000ISDB00103-00014.00537-1901300043
upd_cfg_extract_ibdb_botnet_db_version[523]-version=06002000IBDB00101-00004.00401-
1901281000
upd_cfg_extract_av_db_version[378]-version=06002000AVDB00201-00066.01026-1901301530
upd_cfg_extract_ids_db_version[437]-version=06002000NIDS02403-00014.00537-1901300043
upd_cfg_extract_ids_db_version[437]-version=06002000APDB00103-00006.00741-1512010230
upd_cfg_extract_ids_db_version[437]-version=06002000ISDB00103-00014.00537-1901300043
upd_cfg_extract_ibdb_botnet_db_version[523]-version=06002000IBDB00101-00004.00401-
1901281000
upd_cfg_extract_av_db_version[378]-version=06002000AVDB00201-00066.01026-1901301530
upd_cfg_extract_ids_db_version[437]-version=06002000NIDS02403-00014.00537-1901300043
upd_cfg_extract_ids_db_version[437]-version=06002000APDB00103-00006.00741-1512010230
upd_cfg_extract_ids_db_version[437]-version=06002000ISDB00103-00014.00537-1901300043
upd_cfg_extract_ibdb_botnet_db_version[523]-version=06002000IBDB00101-00004.00401-
1901281000
quar_remote_recv_send()-731: dev=fortisandbox-fsb2 xfer-status=0
__quar_build_pkt()-408: build req(id=337, type=4) for vdom-vdom1, len=99, oftp_name=
__quar_send()-470: dev buffer -- pos=0, len=99
quar_remote_send()-520: req(id=337, type=4) read response, dev=fortisandbox-fsb2, xfer_
status=1, buflen=12
quar_remote_recv_send()-770: dev-fortisandbox-fsb2, oevent=4, nevent=1, xfer-status=1
quar_remote_recv_send()-731: dev=fortisandbox-fsb3 xfer-status=0
__quar_build_pkt()-408: build req(id=338, type=6) for vdom-vdom1, len=93, oftp_name=
__quar_send()-470: dev buffer -- pos=0, len=93
quar_remote_send()-520: req(id=338, type=6) read response, dev=fortisandbox-fsb3, xfer_
FortiOS 6.4.2 Administration Guide 1020
Fortinet Inc.
Security Profiles
status=1, buflen=12
quar_remote_recv_send()-770: dev-fortisandbox-fsb3, oevent=4, nevent=1, xfer-status=1
quar_remote_recv_send()-731: dev=fortisandbox-fsb5 xfer-status=0
__quar_build_pkt()-408: build req(id=340, type=6) for vdom-vdom1, len=93, oftp_name=
__quar_send()-470: dev buffer -- pos=0, len=93
quar_remote_send()-520: req(id=340, type=6) read response, dev=fortisandbox-fsb5, xfer_
status=1, buflen=12
quar_remote_recv_send()-770: dev-fortisandbox-fsb5, oevent=4, nevent=1, xfer-status=1
quar_remote_recv_send()-731: dev=fortisandbox-fsb2 xfer-status=1
quar_remote_recv()-662: dev(fortisandbox-fsb2) received a packet: len=69, type=1
quar_remote_recv()-718: file-[337] is accepted by server(fortisandbox-fsb2).
quar_put_job_req()-332: Job 337 deleted
quar_remote_recv_send()-731: dev=fortisandbox-fsb4 xfer-status=0
__quar_build_pkt()-408: build req(id=339, type=6) for vdom-vdom1, len=93, oftp_name=
__quar_send()-470: dev buffer -- pos=0, len=93
quar_remote_send()-520: req(id=339, type=6) read response, dev=fortisandbox-fsb4, xfer_
status=1, buflen=12
quar_remote_recv_send()-770: dev-fortisandbox-fsb4, oevent=4, nevent=1, xfer-status=1
quar_remote_recv_send()-731: dev=fortisandbox-fsb1 xfer-status=0
__quar_build_pkt()-408: build req(id=336, type=4) for vdom-root, len=98, oftp_name=
__quar_send()-470: dev buffer -- pos=0, len=98
...
__get_analytics_stats()-19: Received an ANALYTICS_STATS request, vfid: 0
__quar_req_handler()-127: Request 0 was handled successfully
__get_analytics_stats()-19: Received an ANALYTICS_STATS request, vfid: 0
__quar_req_handler()-127: Request 0 was handled successfully
__get_analytics_stats()-19: Received an ANALYTICS_STATS request, vfid: 0
__quar_req_handler()-127: Request 0 was handled successfully
__get_analytics_stats()-19: Received an ANALYTICS_STATS request, vfid: 0
__quar_req_handler()-127: Request 0 was handled successfully
quar_fsb_handle_quar()-1439: added a req-6 to fortisandbox-fsb1, vfid=1, oftp-name=[].
__quar_start_connection()-908: start server fortisandbox-fsb1-172.18.52.154 in vdom-1
[103] __ssl_cert_ctx_load: Added cert /etc/cert/factory/root_Fortinet_Factory.cer, root
ca Fortinet_CA, idx 0 (default)
[551] ssl_ctx_create_new_ex: SSL CTX is created
[578] ssl_new: SSL object is created
upd_cfg_extract_av_db_version[378]-version=06002000AVDB00201-00066.01026-1901301530
upd_cfg_extract_ids_db_version[437]-version=06002000NIDS02403-00014.00537-1901300043
upd_cfg_extract_ids_db_version[437]-version=06002000APDB00103-00006.00741-1512010230
upd_cfg_extract_ids_db_version[437]-version=06002000ISDB00103-00014.00537-1901300043
upd_cfg_extract_ibdb_botnet_db_version[523]-version=06002000IBDB00101-00004.00401-
1901281000
quar_remote_recv_send()-731: dev=fortisandbox-fsb1 xfer-status=0
__quar_build_pkt()-408: build req(id=2, type=6) for vdom-vdom1, len=93, oftp_name=
__quar_send()-470: dev buffer -- pos=0, len=93
quar_remote_send()-520: req(id=2, type=6) read response, dev=fortisandbox-fsb1, xfer_
status=1, buflen=12
quar_remote_recv_send()-770: dev-fortisandbox-fsb1, oevent=4, nevent=1, xfer-status=1
quar_remote_recv_send()-731: dev=fortisandbox-fsb1 xfer-status=1
quar_remote_recv()-662: dev(fortisandbox-fsb1) received a packet: len=767, type=1
quar_store_analytics_report()-590: Analytics-report return
file=/tmp/fsb/83bb2d9928b03a68b123730399b6b9365b5cc9a5a77f8aa007a6f1a499a13b18.json.gz,
buf_sz=735
quar_store_analytics_report()-597: The request
'83bb2d9928b03a68b123730399b6b9365b5cc9a5a77f8aa007a6f1a499a13b18' score is 1
quar_remote_recv()-718: file-[2] is accepted by server(fortisandbox-fsb1).
FortiOS 6.4.2 Administration Guide 1021
Fortinet Inc.
Security Profiles
quar_put_job_req()-332: Job 2 deleted
quar_monitor_connection_func()-978: monitoring dev fortisandbox-fsb1
quar_monitor_connection_func()-978: monitoring dev fortisandbox-fsb1
__get_analytics_stats()-19: Received an ANALYTICS_STATS request, vfid: 0
__quar_req_handler()-127: Request 0 was handled successfully
__get_analytics_stats()-19: Received an ANALYTICS_STATS request, vfid: 0
__quar_req_handler()-127: Request 0 was handled successfully
quar_monitor_connection_func()-978: monitoring dev fortisandbox-fsb1
quar_stop_connection()-1006: close connection to server(fortisandbox-fsb1)
[193] __ssl_data_ctx_free: Done
[805] ssl_free: Done
[185] __ssl_cert_ctx_free: Done
[815] ssl_ctx_free: Done
[796] ssl_disconnect: Shutdown
l Appliance FortiSandbox diagnostics:
FGT_PROXY # config global
FGT_PROXY (global) # diagnose test application quarantined 1
Total remote&local devices: 8, any task full? 0
System have disk, vdom is enabled, mgmt=1, ha=2
xfer-fas is enabled: ips-archive dlp-archive, realtime=yes, taskfull=no
addr=0.0.0.0/514, source-ip=0.0.0.0, keep-alive=no.
ssl_opt=0, hmac_alg=0
License=0, content_archive=0, arch_pause=0.
global-fas is disabled.
forticloud-fsb is disabled.
fortisandbox-fsb1 is enabled: analytics, realtime=yes, taskfull=no
addr=172.18.52.154/514, source-ip=0.0.0.0, keep-alive=no.
ssl_opt=3, hmac_alg=0
fortisandbox-fsb2 is enabled: analytics, realtime=yes, taskfull=no
addr=172.18.52.154/514, source-ip=0.0.0.0, keep-alive=no.
ssl_opt=3, hmac_alg=0
fortisandbox-fsb3 is enabled: analytics, realtime=yes, taskfull=no
addr=172.18.52.154/514, source-ip=0.0.0.0, keep-alive=no.
ssl_opt=3, hmac_alg=0
fortisandbox-fsb4 is enabled: analytics, realtime=yes, taskfull=no
addr=172.18.52.154/514, source-ip=0.0.0.0, keep-alive=no.
ssl_opt=3, hmac_alg=0
fortisandbox-fsb5 is enabled: analytics, realtime=yes, taskfull=no
addr=172.18.52.154/514, source-ip=0.0.0.0, keep-alive=no.
ssl_opt=3, hmac_alg=0
fortisandbox-fsb6 is enabled: analytics, realtime=yes, taskfull=no
addr=172.18.52.154/514, source-ip=0.0.0.0, keep-alive=no.
ssl_opt=3, hmac_alg=0
global-faz is disabled.
global-faz2 is disabled.
global-faz3 is disabled.
l Checking FortiSandbox analysis statistics:
FGT_PROXY (global) # diagnose test application quarantine 7
Total: 0
Statistics:
vfid: 0, detected: 0, clean: 0, risk_low: 0, risk_med: 0, risk_high: 0, limit_
reached:0
FortiOS 6.4.2 Administration Guide 1022
Fortinet Inc.
Security Profiles
vfid: 3, detected: 0, clean: 0, risk_low: 0, risk_med: 0, risk_high: 0, limit_
reached:0
vfid: 4, detected: 0, clean: 0, risk_low: 0, risk_med: 0, risk_high: 0, limit_
reached:0
FGT_PROXY (global) #
Debug on the FortiSandbox side
l Appliance FortiSandbox OFTP debug:
# diagnose-debug device FG101E4Q17002429
[2019/01/31 00:48:21] LOGIN->SUCCEED: Serial(FG101E4Q17002429), HOSTNAME(FGT_PROXY)
[2019/01/31 00:48:21] FG101E4Q17002429 VDOM: vdom1
[2019/01/31 00:48:21] FG101E4Q17002429 suspicious stats START_TIME: 1548290749
[2019/01/31 00:48:21] FG101E4Q17002429 suspicious stats END_TIME: 1548895549
[2019/01/31 00:48:21] FG101E4Q17002429 opd_data_len=37 clean=2 detected=2 risk_low=0
risk_med=0 risk_high=0 sus_limit=0
[2019/01/31 00:48:21] FG101E4Q17002429 ENTERING->HANDLE_SEND_FILE.
[2019/01/31 00:48:21] FG101E4Q17002429 ENTERING->HANDLE_SEND_FILE.
[2019/01/31 00:48:21] FG101E4Q17002429 INCOMING->FGT->VDOM: vdom1
[2019/01/31 00:48:21] FG101E4Q17002429 INCOMING->FGT->VDOM: vdom1
[2019/01/31 00:48:21] FG101E4Q17002429 INCOMING->IMG_VERSION: 6.2.0.0818
[2019/01/31 00:48:21] FG101E4Q17002429 INCOMING->IMG_VERSION: 6.2.0.0818
[2019/01/31 00:48:21] INCOMING->FGT: FG101E4Q17002429, VDOM: vdom1
[2019/01/31 00:48:21] INCOMING->FGT: FG101E4Q17002429, VDOM: vdom1
[2019/01/31 00:48:21] FG101E4Q17002429 INCOMING->TYPE: 0
[2019/01/31 00:48:21] FG101E4Q17002429 INCOMING->TYPE: 1
[2019/01/31 00:48:21] FG101E4Q17002429 INCOMING->VERSION: 3 . 1795
[2019/01/31 00:48:21] FG101E4Q17002429 INCOMING->VERSION: 3 . 595
[2019/01/31 00:48:21] FG101E4Q17002429 VDOM: root
[2019/01/31 00:48:21] FG101E4Q17002429 ENTERING->HANDLE_SEND_FILE.
[2019/01/31 00:48:21] FG101E4Q17002429 suspicious stats START_TIME: 1548290749
[2019/01/31 00:48:21] FG101E4Q17002429 INCOMING->FGT->VDOM: vdom1
[2019/01/31 00:48:21] FG101E4Q17002429 suspicious stats END_TIME: 1548895549
[2019/01/31 00:48:21] FG101E4Q17002429 INCOMING->IMG_VERSION: 6.2.0.0818
[2019/01/31 00:48:21] INCOMING->FGT: FG101E4Q17002429, VDOM: vdom1
[2019/01/31 00:48:21] FG101E4Q17002429 INCOMING->TYPE: 4
[2019/01/31 00:48:21] FG101E4Q17002429 opd_data_len=37 clean=0 detected=0 risk_low=0
risk_med=0 risk_high=0 sus_limit=0
[2019/01/31 00:48:22] FG101E4Q17002429 RETRIEVE->PKG: TYPE: av, ENTRY_VERSION: 1795,
PACKAGE_PATH: /Storage/malpkg/pkg/avsig/avsigrel_1795.pkg
[2019/01/31 00:48:22] FG101E4Q17002429 RETRIEVE->PKG: TYPE: url, ENTRY_VERSION: 595,
PACKAGE_PATH: /Storage/malpkg/pkg/url/urlrel_595.pkg.gz
[2019/01/31 00:48:29] LOGIN->SUCCEED: Serial(FG101E4Q17002429), HOSTNAME(FGT_PROXY)
[2019/01/31 00:48:32] LOGIN->SUCCEED: Serial(FG101E4Q17002429), HOSTNAME(FGT_PROXY)
[2019/01/31 00:48:59] LOGIN->SUCCEED: Serial(FG101E4Q17002429), HOSTNAME(FGT_PROXY)
[2019/01/31 00:49:03] LOGIN->SUCCEED: Serial(FG101E4Q17002429), HOSTNAME(FGT_PROXY)
Using FortiSandbox Cloud with antivirus
FortiOS 6.4.2 Administration Guide 1023
Fortinet Inc.
Security Profiles
Feature overview
FortiSandbox Cloud allows users to take advantage of FortiSandbox features without having to purchase, operate, and
maintain a physical appliance. It works the same way as the physical FortiSandbox appliance.
FortiSandbox Cloud allows you to control the region where your traffic is sent to for analysis. This allows you to meet
your country's compliances regarding data storage locations.
For more information, see FortiSandbox on page 148.
Support and limitations
l In FortiOS 6.2 and later, users do not require a FortiGate Cloud account to use FortiSandbox Cloud.
l Without a valid AVDB license, FortiGate devices are limited to 100 FortiGate Cloud submissions per day.
l Unlimited FortiGate Cloud submissions are allowed if the FortiGate has a valid AVDB license.
l There is a limit on how many submissions are sent per minute.
l The per-minute submission rate is based on the FortiGate model.
l FortiSandbox can be used with antivirus in both proxy-based and flow-based policy inspection modes.
l With FortiSandbox enabled, full scan mode antivirus can do the following:
l Submit only suspicious files to FortiSandbox for inspection.
l Submit every file to FortiSandbox for inspection.
l Do not submit anything.
l Quick scan mode antivirus cannot submit suspicious files to FortiSandbox. It can only do the following:
l Submit every file to FortiSandbox for inspection.
l Do not submit anything.
Network topology example
Configuring the feature
To configure antivirus to work with an external block list, the following steps are required:
1. Through FortiCare, register the FortiGate device and purchase a FortiGuard antivirus license
2. Enable FortiSandbox Cloud on the FortiGate
3. Enable FortiSandbox inspection
4. Enable the use of the FortiSandbox database
FortiOS 6.4.2 Administration Guide 1024
Fortinet Inc.
Security Profiles
To obtain or renew an AVDB license:
1. Please see the video How to Purchase or Renew FortiGuard Services for FortiGuard antivirus license purchase
instructions.
2. Once a FortiGuard license has been purchased or activated, users will be provided with a paid FortiSandbox Cloud
license.
a. Go to Global > Dashboard > Status to view the FortiSandbox Cloud license indicator.
b. Users can also view this indicator at Global > System > FortiGuard.
To enable FortiSandbox Cloud on the FortiGate:
1. Make the FortiSandbox Cloud feature visible:
config system global
set gui-fortisandbox-cloud enable
end
2. Log out of FortiOS and log in again.
3. Go to Global > Security Fabric > Fabric Connectors and double-click the FortiSandbox card.
4. For status, click Enable.
5. For Type, click FortiSandbox Cloud and choose a region from the dropdown list.
FortiOS 6.4.2 Administration Guide 1025
Fortinet Inc.
Security Profiles
6. Click OK to save the settings.
7. When the FortiGate is connected to the FortiSandbox Cloud, FortiSandbox's current database version is displayed.
To enable FortiSandbox inspection:
1. Go to Security Profiles > AntiVirus.
2. Enable FortiSandbox inspection by selecting either Suspicious Files Only or All Supported Files.
3. Files can be excluded from being sent to FortiSandbox based on their file types by choosing from a list of supported
file types.
FortiOS 6.4.2 Administration Guide 1026
Fortinet Inc.
Security Profiles
4. Files can also be excluded from being sent to FortiSandbox by using wildcard patterns.
5. Click Apply.
To enable the use of the FortiSandbox database:
1. Go to Security Profiles > AntiVirus.
2. Enable Use FortiSandbox Database.
3. Click Apply.
Diagnostics and debugging
l Checking FortiGate Cloud controller status:
FGT_FL_FULL (global) # diagnose test application forticldd 2
Server: log-controller, task=0/10, watchdog is off
Domain name: logctrl1.fortinet.com
FortiOS 6.4.2 Administration Guide 1027
Fortinet Inc.
Security Profiles
Address of log-controller: 1
172.16.95.168:443
Statistics: total=3, discarded=1, sent=2, last_updated=12163 secs ago
http connection: is not in progress
Current address: 172.16.95.168:443
Calls: connect=9, rxtx=12
Current tasks number: 0
Account: name=empty, status=0, type=basic
Current volume: 0B
Current tasks number: 0
Update timer fires in 74240 secs
l Checking Cloud APT server status:
FGT_FL_FULL (global) # diagnose test application forticldd 3
Debug zone info:
Domain:
Home log server: 0.0.0.0:0
Alt log server: 0.0.0.0:0
Active Server IP: 0.0.0.0
Active Server status: down
Log quota: 0MB
Log used: 0MB
Daily volume: 0MB
fams archive pause: 0
APTContract : 1 <====
APT server: 172.16.102.51:514 <====
APT Altserver: 172.16.102.52:514 <====
Active APTServer IP: 172.16.102.51 <====
Active APTServer status: up <====
l FortiSandbox Cloud diagnostics:
FGT_FL_FULL (global) # diagnose test application quarantine 1
Total remote&local devices: 4, any task full? 0
System have disk, vdom is enabled, mgmt=3, ha=1
xfer-fas is enabled: ips-archive dlp-archive, realtime=yes, taskfull=no
addr=0.0.0.0/514, source-ip=0.0.0.0, keep-alive=no.
ssl_opt=1, hmac_alg=0
License=0, content_archive=0, arch_pause=0.
global-fas is disabled.
forticloud-fsb is enabled: analytics, realtime=yes, taskfull=no
addr=172.16.102.51/514, source-ip=0.0.0.0, keep-alive=no.
ssl_opt=1, hmac_alg=0
fortisandbox-fsb1 is disabled.
fortisandbox-fsb2 is disabled.
fortisandbox-fsb3 is disabled.
fortisandbox-fsb4 is disabled.
fortisandbox-fsb5 is disabled.
fortisandbox-fsb6 is disabled.
global-faz is disabled.
global-faz2 is disabled.
global-faz3 is disabled.
FortiOS 6.4.2 Administration Guide 1028
Fortinet Inc.
Security Profiles
l Checking FortiSandbox Cloud submission statistics:
FGT_FL_FULL (global) # diagnose test application quarantined 2
Quarantine daemon state:
QUAR mem: mem_used=0, mem_limit=97269, threshold=72951
dropped(0 by quard, 0 by callers)
pending-jobs=0, tot-mem=0, last_ipc_run=12353, check_new_req=1
alloc_job_failed=0, job_wrong_type=0, job_wrong_req_len=0, job_invalid_qfd=0
tgz_create_failed=0, tgz_attach_failed=0, qfd_mmap_failed=0, buf_attached=0
xfer-fas:
ips: total=0, handled=0, accepted=0
quar: total=0, handled=0, accepted=0
archive: total=0, handled=0, accepted=0
analytics: total=0, handled=0, accepted=0, local_dups=0
analytics stats: total=0, handled=0, accepted=0
last_rx=0, last_tx=0, error_rx=0, error_tx=0
max_num_tasks=10000, num_tasks=0, mem_used=0, ttl_drops=0, xfer_status=0
forticloud-fsb:
ips: total=0, handled=0, accepted=0
quar: total=0, handled=0, accepted=0
archive: total=0, handled=0, accepted=0
analytics: total=0, handled=0, accepted=0, local_dups=0
num_buffer=0(per-minute:10) last_min_count=0 last_vol_count=0 next_vol_reset_tm='Sun Feb
17 00:00:00 2019
'
analytics stats: total=24, handled=24, accepted=24
last_rx=1224329, last_tx=1224329, error_rx=2, error_tx=0
max_num_tasks=200, num_tasks=0, mem_used=0, ttl_drops=0, xfer_status=0
l Checking FortiSandbox analysis statistics:
FGT_FL_FULL (global) # diagnose test application quarantine 7
Total: 0
Statistics:
vfid: 0, detected: 0, clean: 0, risk_low: 0, risk_med: 0, risk_high: 0, limit_
reached:0
vfid: 3, detected: 0, clean: 0, risk_low: 0, risk_med: 0, risk_high: 0, limit_
reached:0
vfid: 4, detected: 0, clean: 0, risk_low: 0, risk_med: 0, risk_high: 0, limit_
reached:0
FGT_FL_FULL (global) #
l Update Daemon debug:
FGT_FL_FULL (global) # diagnose debug application quarantined -1
FGT_FL_FULL (global) # diagnose debug enable
quar_req_fsa_file()-890: fsa ext list new_version (1547781904)
quar_fsb_handle_quar()-1439: added a req-6 to fortisandbox-fsb5, vfid=1, oftp-name=[].
__quar_start_connection()-908: start server fortisandbox-fsb5-172.18.52.154 in vdom-1
[103] __ssl_cert_ctx_load: Added cert /etc/cert/factory/root_Fortinet_Factory.cer, root
ca Fortinet_CA, idx 0 (default)
[551] ssl_ctx_create_new_ex: SSL CTX is created
[578] ssl_new: SSL object is created
upd_cfg_extract_av_db_version[378]-version=06002000AVDB00201-00066.01026-1901301530
upd_cfg_extract_ids_db_version[437]-version=06002000NIDS02403-00014.00537-1901300043
FortiOS 6.4.2 Administration Guide 1029
Fortinet Inc.
Security Profiles
upd_cfg_extract_ids_db_version[437]-version=06002000APDB00103-00006.00741-1512010230
upd_cfg_extract_ids_db_version[437]-version=06002000ISDB00103-00014.00537-1901300043
upd_cfg_extract_ibdb_botnet_db_version[523]-version=06002000IBDB00101-00004.00401-
1901281000
upd_cfg_extract_av_db_version[378]-version=06002000AVDB00201-00066.01026-1901301530
upd_cfg_extract_ids_db_version[437]-version=06002000NIDS02403-00014.00537-1901300043
upd_cfg_extract_ids_db_version[437]-version=06002000APDB00103-00006.00741-1512010230
upd_cfg_extract_ids_db_version[437]-version=06002000ISDB00103-00014.00537-1901300043
upd_cfg_extract_ibdb_botnet_db_version[523]-version=06002000IBDB00101-00004.00401-
1901281000
upd_cfg_extract_av_db_version[378]-version=06002000AVDB00201-00066.01026-1901301530
upd_cfg_extract_ids_db_version[437]-version=06002000NIDS02403-00014.00537-1901300043
upd_cfg_extract_ids_db_version[437]-version=06002000APDB00103-00006.00741-1512010230
upd_cfg_extract_ids_db_version[437]-version=06002000ISDB00103-00014.00537-1901300043
upd_cfg_extract_ibdb_botnet_db_version[523]-version=06002000IBDB00101-00004.00401-
1901281000
upd_cfg_extract_av_db_version[378]-version=06002000AVDB00201-00066.01026-1901301530
upd_cfg_extract_ids_db_version[437]-version=06002000NIDS02403-00014.00537-1901300043
upd_cfg_extract_ids_db_version[437]-version=06002000APDB00103-00006.00741-1512010230
upd_cfg_extract_ids_db_version[437]-version=06002000ISDB00103-00014.00537-1901300043
upd_cfg_extract_ibdb_botnet_db_version[523]-version=06002000IBDB00101-00004.00401-
1901281000
upd_cfg_extract_av_db_version[378]-version=06002000AVDB00201-00066.01026-1901301530
upd_cfg_extract_ids_db_version[437]-version=06002000NIDS02403-00014.00537-1901300043
upd_cfg_extract_ids_db_version[437]-version=06002000APDB00103-00006.00741-1512010230
upd_cfg_extract_ids_db_version[437]-version=06002000ISDB00103-00014.00537-1901300043
upd_cfg_extract_ibdb_botnet_db_version[523]-version=06002000IBDB00101-00004.00401-
1901281000
quar_remote_recv_send()-731: dev=fortisandbox-fsb2 xfer-status=0
__quar_build_pkt()-408: build req(id=337, type=4) for vdom-vdom1, len=99, oftp_name=
__quar_send()-470: dev buffer -- pos=0, len=99
quar_remote_send()-520: req(id=337, type=4) read response, dev=fortisandbox-fsb2, xfer_
status=1, buflen=12
quar_remote_recv_send()-770: dev-fortisandbox-fsb2, oevent=4, nevent=1, xfer-status=1
quar_remote_recv_send()-731: dev=fortisandbox-fsb3 xfer-status=0
__quar_build_pkt()-408: build req(id=338, type=6) for vdom-vdom1, len=93, oftp_name=
__quar_send()-470: dev buffer -- pos=0, len=93
quar_remote_send()-520: req(id=338, type=6) read response, dev=fortisandbox-fsb3, xfer_
status=1, buflen=12
quar_remote_recv_send()-770: dev-fortisandbox-fsb3, oevent=4, nevent=1, xfer-status=1
quar_remote_recv_send()-731: dev=fortisandbox-fsb5 xfer-status=0
__quar_build_pkt()-408: build req(id=340, type=6) for vdom-vdom1, len=93, oftp_name=
__quar_send()-470: dev buffer -- pos=0, len=93
quar_remote_send()-520: req(id=340, type=6) read response, dev=fortisandbox-fsb5, xfer_
status=1, buflen=12
quar_remote_recv_send()-770: dev-fortisandbox-fsb5, oevent=4, nevent=1, xfer-status=1
quar_remote_recv_send()-731: dev=fortisandbox-fsb2 xfer-status=1
quar_remote_recv()-662: dev(fortisandbox-fsb2) received a packet: len=69, type=1
quar_remote_recv()-718: file-[337] is accepted by server(fortisandbox-fsb2).
quar_put_job_req()-332: Job 337 deleted
quar_remote_recv_send()-731: dev=fortisandbox-fsb4 xfer-status=0
__quar_build_pkt()-408: build req(id=339, type=6) for vdom-vdom1, len=93, oftp_name=
__quar_send()-470: dev buffer -- pos=0, len=93
quar_remote_send()-520: req(id=339, type=6) read response, dev=fortisandbox-fsb4, xfer_
status=1, buflen=12
quar_remote_recv_send()-770: dev-fortisandbox-fsb4, oevent=4, nevent=1, xfer-status=1
FortiOS 6.4.2 Administration Guide 1030
Fortinet Inc.
Security Profiles
quar_remote_recv_send()-731: dev=fortisandbox-fsb1 xfer-status=0
__quar_build_pkt()-408: build req(id=336, type=4) for vdom-root, len=98, oftp_name=
__quar_send()-470: dev buffer -- pos=0, len=98
...
__get_analytics_stats()-19: Received an ANALYTICS_STATS request, vfid: 0
__quar_req_handler()-127: Request 0 was handled successfully
__get_analytics_stats()-19: Received an ANALYTICS_STATS request, vfid: 0
__quar_req_handler()-127: Request 0 was handled successfully
__get_analytics_stats()-19: Received an ANALYTICS_STATS request, vfid: 0
__quar_req_handler()-127: Request 0 was handled successfully
__get_analytics_stats()-19: Received an ANALYTICS_STATS request, vfid: 0
__quar_req_handler()-127: Request 0 was handled successfully
quar_fsb_handle_quar()-1439: added a req-6 to fortisandbox-fsb1, vfid=1, oftp-name=[].
__quar_start_connection()-908: start server fortisandbox-fsb1-172.18.52.154 in vdom-1
[103] __ssl_cert_ctx_load: Added cert /etc/cert/factory/root_Fortinet_Factory.cer, root
ca Fortinet_CA, idx 0 (default)
[551] ssl_ctx_create_new_ex: SSL CTX is created
[578] ssl_new: SSL object is created
upd_cfg_extract_av_db_version[378]-version=06002000AVDB00201-00066.01026-1901301530
upd_cfg_extract_ids_db_version[437]-version=06002000NIDS02403-00014.00537-1901300043
upd_cfg_extract_ids_db_version[437]-version=06002000APDB00103-00006.00741-1512010230
upd_cfg_extract_ids_db_version[437]-version=06002000ISDB00103-00014.00537-1901300043
upd_cfg_extract_ibdb_botnet_db_version[523]-version=06002000IBDB00101-00004.00401-
1901281000
quar_remote_recv_send()-731: dev=fortisandbox-fsb1 xfer-status=0
__quar_build_pkt()-408: build req(id=2, type=6) for vdom-vdom1, len=93, oftp_name=
__quar_send()-470: dev buffer -- pos=0, len=93
quar_remote_send()-520: req(id=2, type=6) read response, dev=fortisandbox-fsb1, xfer_
status=1, buflen=12
quar_remote_recv_send()-770: dev-fortisandbox-fsb1, oevent=4, nevent=1, xfer-status=1
quar_remote_recv_send()-731: dev=fortisandbox-fsb1 xfer-status=1
quar_remote_recv()-662: dev(fortisandbox-fsb1) received a packet: len=767, type=1
quar_store_analytics_report()-590: Analytics-report return
file=/tmp/fsb/83bb2d9928b03a68b123730399b6b9365b5cc9a5a77f8aa007a6f1a499a13b18.json.gz,
buf_sz=735
quar_store_analytics_report()-597: The request
'83bb2d9928b03a68b123730399b6b9365b5cc9a5a77f8aa007a6f1a499a13b18' score is 1
quar_remote_recv()-718: file-[2] is accepted by server(fortisandbox-fsb1).
quar_put_job_req()-332: Job 2 deleted
quar_monitor_connection_func()-978: monitoring dev fortisandbox-fsb1
quar_monitor_connection_func()-978: monitoring dev fortisandbox-fsb1
__get_analytics_stats()-19: Received an ANALYTICS_STATS request, vfid: 0
__quar_req_handler()-127: Request 0 was handled successfully
__get_analytics_stats()-19: Received an ANALYTICS_STATS request, vfid: 0
__quar_req_handler()-127: Request 0 was handled successfully
quar_monitor_connection_func()-978: monitoring dev fortisandbox-fsb1
quar_stop_connection()-1006: close connection to server(fortisandbox-fsb1)
[193] __ssl_data_ctx_free: Done
[805] ssl_free: Done
[185] __ssl_cert_ctx_free: Done
[815] ssl_ctx_free: Done
[796] ssl_disconnect: Shutdown
l Appliance FortiSandbox diagnostics:
FGT_PROXY # config global
FGT_PROXY (global) # diagnose test application quarantined 1
FortiOS 6.4.2 Administration Guide 1031
Fortinet Inc.
Security Profiles
Total remote&local devices: 8, any task full? 0
System have disk, vdom is enabled, mgmt=1, ha=2
xfer-fas is enabled: ips-archive dlp-archive, realtime=yes, taskfull=no
addr=0.0.0.0/514, source-ip=0.0.0.0, keep-alive=no.
ssl_opt=0, hmac_alg=0
License=0, content_archive=0, arch_pause=0.
global-fas is disabled.
forticloud-fsb is disabled.
fortisandbox-fsb1 is enabled: analytics, realtime=yes, taskfull=no
addr=172.18.52.154/514, source-ip=0.0.0.0, keep-alive=no.
ssl_opt=3, hmac_alg=0
fortisandbox-fsb2 is enabled: analytics, realtime=yes, taskfull=no
addr=172.18.52.154/514, source-ip=0.0.0.0, keep-alive=no.
ssl_opt=3, hmac_alg=0
fortisandbox-fsb3 is enabled: analytics, realtime=yes, taskfull=no
addr=172.18.52.154/514, source-ip=0.0.0.0, keep-alive=no.
ssl_opt=3, hmac_alg=0
fortisandbox-fsb4 is enabled: analytics, realtime=yes, taskfull=no
addr=172.18.52.154/514, source-ip=0.0.0.0, keep-alive=no.
ssl_opt=3, hmac_alg=0
fortisandbox-fsb5 is enabled: analytics, realtime=yes, taskfull=no
addr=172.18.52.154/514, source-ip=0.0.0.0, keep-alive=no.
ssl_opt=3, hmac_alg=0
fortisandbox-fsb6 is enabled: analytics, realtime=yes, taskfull=no
addr=172.18.52.154/514, source-ip=0.0.0.0, keep-alive=no.
ssl_opt=3, hmac_alg=0
global-faz is disabled.
global-faz2 is disabled.
global-faz3 is disabled.
Web filter
Web filtering restricts or controls user access to web resources and can be applied to firewall policies using either policy-
based or profile-based NGFW mode.
In FortiOS, there are three main components of web filtering:
l Web content filter: blocks web pages containing words or patterns that you specify.
l URL filter: uses URLs and URL patterns to block or exempt web pages from specific sources, or block malicious
URLs discovered by FortiSandbox.
l FortiGuard Web Filtering service: provides many additional categories you can use to filter web traffic.
These components interact with each other to provide maximum control over what users on your network can view and
protect your network from many internet content threats.
Web filters are applied in the following order:
1. URL filter
2. FortiGuard Web Filtering
3. Web content filter
4. Web script filter
5. Antivirus scanning
FortiOS 6.4.2 Administration Guide 1032
Fortinet Inc.
Security Profiles
FortiOS includes three preloaded web filter profiles:
l default
l monitor-all (monitors and logs all URLs visited, flow-based)
l wifi-default (default configuration for offloading WiFi traffic)
You can customize these profiles, or you can create your own to manage network user access.
Some features of this functionality require a subscription to FortiGuard Web Filtering.
The following topics provide information about web filters:
l URL filter on page 1033
l FortiGuard filter on page 1039
l Credential phishing prevention on page 1044
l Usage quota on page 1047
l Web content filter on page 1049
l Advanced filters 1 on page 1053
l Advanced filters 2 on page 1057
l Flow-based web filtering on page 1064
l URL certificate blocklist on page 1066
URL filter
URL filter is also called static URL filter. By adding specific URLs with patterns containing text and regular expressions,
FortiGate can allow, block, exempt, and monitor web pages matching any specified URLs or patterns, and can display a
replacement message instead.
Sample topology
Create a URL filter using the GUI
After creating the URL filter, attach it to a web filter profile.
FortiOS 6.4.2 Administration Guide 1033
Fortinet Inc.
Security Profiles
To create a URL filter in the GUI:
1. Go to Security Profiles > Web Filter and click Create New, or edit an existing profile.
2. Go the Static URL Filter section and enable URL Filter.
3. Under URL Filter, click Create New to display the New URL Filter pane.
URL Filter Type Description
Simple FortiGate tries to strictly match the full context. For example, if you enter
www.facebook.com in the URL field, it only matches traffic with www.facebook.com. It
won't match facebook.com or message.facebook.com.
When FortiGate finds a match, it performs the selected URL Action.
Regular FortiGate tries to match the pattern based on the rules of regular expressions or
Expression or wildcards. For example, if you enter *fa* in the URL field, it matches all the content that
Wildcard has fa such as www.facebook.com, message.facebook.com, fast.com, etc.
When FortiGate finds a match, it performs the selected URL Action.
For more information, see the URL Filter expressions technical note in
https://kb.fortinet.com/kb/documentLink.do?externalID=FD37057.
URL Filter Action Description
Block Denies or blocks attempts to access any URL matching the URL pattern. FortiGate
displays a replacement message.
Allow The traffic is passed to the remaining FortiGuard web filters, web content filters, web script
filters, antivirus proxy operations, and DLP proxy operations. If the URL does not appear
in the URL list, the traffic is permitted.
Monitor The traffic is processed the same way as the Allow action. For the Monitor action, a log
message is generated each time a matching traffic pattern is established.
Exempt The traffic is allowed to bypass the remaining FortiGuard web filters, web content filters,
web script filters, antivirus scanning, and DLP proxy operations
FortiOS 6.4.2 Administration Guide 1034
Fortinet Inc.
Security Profiles
4. Enter *facebook.com, select Wildcard, and select Block.
5. Click OK.
6. Attach the URL filter to a web filter profile.
Create a URL filter using the CLI
To create and enable a URL filter using the CLI, create the URL filter and then attach it to a webfilter profile. The CLI
commands below show the full configuration of creating a URL filter.
config webfilter urlfilter
edit {id}
# Configure URL filter lists.
set name {string} Name of URL filter list. size[35]
config entries
edit {id}
# URL filter entries.
set url {string} URL to be filtered. size[511]
set type {simple | regex | wildcard} Filter type (simple, regex, or wildcard).
simple Simple URL string.
regex Regular expression URL string.
wildcard Wildcard URL string.
set action {exempt | block | allow | monitor} Action to take for URL filter
matches.
exempt Exempt matches.
block Block matches.
allow Allow matches (no log).
monitor Allow matches (with log).
set status {enable | disable} Enable/disable this URL filter.
set exempt {option} If action is set to exempt, select the security profile
operations that exempt URLs skip. Separate multiple options with a space.
av AntiVirus scanning.
web-content Web Filter content matching.
activex-java-cookie ActiveX, Java, and cookie filtering.
dlp DLP scanning.
fortiguard FortiGuard web filter.
range-block Range block feature.
pass Pass single connection from all.
all Exempt from all security profiles.
set referrer-host {string} Referrer host name. size[255]
next
next
end
FortiOS 6.4.2 Administration Guide 1035
Fortinet Inc.
Security Profiles
To create a URL filter to filter Facebook using the CLI:
config webfilter urlfilter
edit 1
set name "webfilter"
config entries
edit 1
set url "*facebook.com"
set type wildcard
set action block
next
end
next
end
To attach the URL filter to a web filter profile:
config webfilter profile
edit "webfilter"
config web
set urlfilter-table 1
end
config ftgd-wf
unset options
end
next
end
Attach web filter profile to the firewall policy
After you have created the URL filter and attached it to a web filter profile, you must attach the profile to a firewall policy.
To attach a web filter profile to a firewall policy using the GUI:
1. Go to Policy & Objects > Firewall Policy.
2. Edit the policy that you want to enable the web filter on.
3. In the Security Profiles section, enable Web Filter and select the profile you created.
FortiOS 6.4.2 Administration Guide 1036
Fortinet Inc.
Security Profiles
To attach a web filter profile to a firewall policy using the CLI:
config firewall policy
edit 1
set name "WF"
set srcintf "wan2"
set dstintf "wan1"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set utm-status enable
set inspection-mode proxy
set logtraffic all
set webfilter-profile "webfilter"
set profile-protocol-options "protocol"
set ssl-ssh-profile "protocols"
set nat enable
next
end
Validate the URL filter results
Validate the URL filter results by going to a blocked website. For example, when you go to the Facebook website, you
see the replacement message.
To customize the URL web page blocked message:
1. Go to System > Replacement Messages.
2. In the HTTP section, select URL Block Page and click Edit.
FortiOS 6.4.2 Administration Guide 1037
Fortinet Inc.
Security Profiles
3. Edit the HTML to customize the message.
To check web filter logs in the GUI:
1. Go to Log & Report > Web Filter.
2. If there are a lot of log entries, click Add Filter and select Event Type > urlfilter to display logs generated by the URL
filter.
To check web filter logs in the CLI:
# execute log filter category utm-webfilter
FortiOS 6.4.2 Administration Guide 1038
Fortinet Inc.
Security Profiles
# execute log display
1: date=2019-04-22 time=11:48:43 logid="0315012544" type="utm" subtype="webfilter"
eventtype="urlfilter" level="warning" vd="vdom1" eventtime=1555958923322174610
urlfilteridx=0 urlsource="Local URLfilter Block" policyid=1 sessionid=649063
srcip=10.1.200.15 srcport=50472 srcintf="wan2" srcintfrole="wan" dstip=157.240.18.35
dstport=443 dstintf="wan1" dstintfrole="wan" proto=6 service="HTTPS"
hostname="www.facebook.com" profile="webfilter" action="blocked" reqtype="direct" url="/"
sentbyte=1171 rcvdbyte=141 direction="outgoing" msg="URL was blocked because it is in the
URL filter list" crscore=30 craction=8 crlevel="high"
FortiGuard filter
FortiGuard filter enhances the web filter features supplied with your FortiGate unit by sorting billions of web pages into a
wide range of categories that users can allow or block.
The FortiGuard Web Filtering service includes over 45 million individual website ratings that apply to more than two
billion pages. When the FortiGuard filter is enabled in a web filter and is applied to firewall policies, if a request for a web
page appears in traffic controlled by one of the firewall policies, the URL is sent to the nearest FortiGuard server. The
URL category or rating is returned. If the category is blocked, the FortiGate shows a replacement message in place of
the requested page. If the category is not blocked, the page request is sent to the requested URL as normal.
To use this service, you must have a valid subscription on your FortiGate.
FortiGuard web filter actions
You can select one of the following FortiGuard web filter actions:
FortiGuard Web Description
Filter Action
Allow Permit access to the sites in the category.
Block Prevent access to the sites in the category. Users trying to access a blocked site sees a
replacement message indicating the site is blocked.
Monitor Permits and logs access to sites in the category. You can enable user quotas when you
enable this action.
Warning Displays a message to the user allowing them to continue if they choose.
Authenticate Requires the user to authenticate with the FortiGate before allowing access to the category or
category group.
When the action for a local or remote category is Allow, the category is disabled. The next
category's action, in the order of preference, will be applied.
FortiGuard web filter categories
FortiGuard has many web filter categories including two local categories and a special remote category. For more
information on the different categories, see the table below.
FortiOS 6.4.2 Administration Guide 1039
Fortinet Inc.
Security Profiles
FortiGuard Web Filter Where to find more information
category
All URL categories https://fortiguard.com/webfilter/categories.
Local categories Web rating override on page 1164.
Remote category Threat feeds on page 296.
The priority of categories is local category > external category > FortiGuard built-in category. If a URL is configured as a
local category, it only follows the behavior of local category and not external or FortiGuard built-in category.
Blocking a web category
This example shows blocking a website based on its category (rating).
To block a category in the GUI:
1. Go to Security Profiles > Web Filter and edit or create a new web filter profile.
2. In the FortiGuard category based filter section, select a category and then click Block.
3. Configure the remaining settings as required, and then click OK.
To block a category in the CLI:
config webfilter profile
edit "webfilter"
config ftgd-wf
unset options
config filters
edit 1
set category 52
set action block
next
end
end
next
end
FortiOS 6.4.2 Administration Guide 1040
Fortinet Inc.
Security Profiles
To check that the category is blocked:
1. Go to a website belonging to the blocked category, for example, www.fortinet.com in the Information Technolgy
category
The page should be blocked.
To view the log of a blocked website in the GUI:
1. Go to Log & Report > Web Filter.
2. Select an entry with blocked in the Action column and click Details.
3.
To view the log of a blocked website in the CLI:
# execute log filter category utm-webfilter
# execute log display
1: date=2019-04-22 time=13:46:25 logid="0316013056" type="utm" subtype="webfilter"
eventtype="ftgd_blk" level="warning" vd="vdom1" eventtime=1555965984972459609 policyid=1
sessionid=659263 srcip=10.1.200.15 srcport=49234 srcintf="wan2" srcintfrole="wan"
dstip=54.183.57.55 dstport=80 dstintf="wan1" dstintfrole="wan" proto=6 service="HTTP"
hostname="www.fortinet.com" profile="webfilter" action="blocked" reqtype="direct" url="/"
sentbyte=386 rcvdbyte=0 direction="outgoing" msg="URL belongs to a denied category in
policy" method="domain" cat=52 catdesc="Information Technology"
FortiOS 6.4.2 Administration Guide 1041
Fortinet Inc.
Security Profiles
Issuing a warning on a web category
This example shows issuing a warning when a user visits a website in a specific category.
To configure a warning for a category in the GUI:
1. Go to Security Profiles > Web Filter and edit or create a new web filter profile.
2. In the FortiGuard category based filter section, select a category and then click Warning.
3. Set the Warning Interval, then click OK.
The warning interval is the amount of time until the warning appears again after the user proceeds past it.
4. Configure the remaining settings as required, and then click OK.
To configure a warning for a category in the CLI:
config webfilter profile
edit "webfilter"
config ftgd-wf
unset options
config filters
edit 1
set category 52
set action warning
next
end
end
next
end
To check that the warning is working:
1. Go to a website belonging to the configured category, for example, www.fortinet.com in the Information Technolgy
category.
FortiOS 6.4.2 Administration Guide 1042
Fortinet Inc.
Security Profiles
2. On the warning page, click Proceed or Go Back.
Authenticating a web category
This example shows authenticating a website based on its category (rating).
To authenticate a category in the GUI:
1. Go to Security Profiles > Web Filter and edit or create a new web filter profile.
2. In the FortiGuard category based filter section, select a category and then click Warning.
3. Set the Warning Interval.
4. Select one or more user groups, then click OK.
5. Configure the remaining settings as required, and then click OK.
To authenticate a category in the CLI:
config webfilter profile
edit "webfilter"
config ftgd-wf
unset options
config filters
edit 1
set category 52
set action authenticate
set auth-usr-grp "local_group"
next
end
end
next
end
FortiOS 6.4.2 Administration Guide 1043
Fortinet Inc.
Security Profiles
To validate that you have configured authentication:
1. Go to a website belonging to the configured category, for example, www.fortinet.com in the Information Technolgy
category.
2. On the warning page, click Proceed.
3. Enter the username and password for the configured user group, then click Continue..
Customizing the replacement message page
When the category action is Block, Warning, or Authenticate, you can customize the replacement message page that a
user sees.
To customize the replacement message page:
1. Go to Security Profiles > Web Filter and edit or create a new web filter profile.
2. In the FortiGuard category based filter section, right-click on a category and select Customize.
3. Select a Replacement Message Group. See Replacement message groups on page 803 for details.
4. Optionally, click Edit FortiGuard Block Page or Edit FortiGuard Warning Page to make modifications.
5. Click Save.
6. Configure the remaining settings as required, and then click OK.
Credential phishing prevention
When credential phishing prevention is enabled, the FortiGate scans for corporate credentials submitted to external
websites and compares them to sensitive credentials stored in the corporate domain controller. Based on the configured
antiphishing rules in proxy mode web filter profiles, the FortiGate will block the URL or alert the user if the credentials
match ones that are stored on the corporate domain controller.
l The corporate domain controller must be configured on the credential-store.
l Credentials can be matched based on sAMAccountName, user principal name (UPN), or down-level logon name.
FortiOS 6.4.2 Administration Guide 1044
Fortinet Inc.
Security Profiles
l The antiphishing profile defines the corporate domain controller, antiphishing check option, default action if no rules
match, antiphishing status, and so on.
l Inspection entries in the profile define what action occurs when the submission request matches the specified
FortiGuard categories.
l The profile scans for pre-defined and custom username and password fields in the HTTP request, such as
username, auth, and password. You can evaluate custom fields by configuring custom patterns.
l The URL filter defines individual URLs that the antiphish action (block or log) is applied to when the URL submission
request matches.
Web-based URL filter actions and FortiGuard category-based filtering have higher priority than
antiphishing URL filter actions and FortiGuard filtering:
l If a request is blocked by the web-based URL filter or FortiGuard filter, there is no further
antiphishing scanning. Antiphishing scanning only happens after the web-based URL
filtes and FortiGuard filters allow the traffic.
l If a submission matches an entry in the URL filter table that has an antiphishing action,
the defined action is taken. No further FortiGuard category-based rules are applied.
l Like firewall rules, the URL filter table and Fortiguard category-based antiphishing rules
use a top-down priority. The rule that matches first is the one that is used.
In this example, URLs that match FortiGuard category 37 (social networking) will be blocked and other categories will be
logged.
To configure credential phishing prevention:
1. Configure the corporate domain controller:
config credential-store domain-controller
edit "win2016"
set hostname "win2016"
set domain-name "corpserver.local"
set username "Administrator"
set password **********
set ip <server_ip>
next
end
The hostname and the domain-name are case sensitive.
2. Configure the antiphishing profile, which includes the FortiGuard category rule:
config webfilter profile
edit <profile-name>
set feature-set proxy
...
config web
...
end
config antiphish
set status enable
set domain-controller "win2016"
FortiOS 6.4.2 Administration Guide 1045
Fortinet Inc.
Security Profiles
set default-action block
set check-uri enable
set check-basic-auth enable
set max-body-len 65536
config inspection-entries
edit "inspect-37"
set fortiguard-category 37
set action block
next
edit "inspect-others"
set fortiguard-category all
set action log
next
end
config custom-patterns
edit "customer-name"
set category username
next
edit "customer-passwd"
set category password
next
end
end
...
set web-antiphishing-log enable
next
end
lcheck-uri enables support for scanning HTTP GET URI parameters.
l check-basic-auth enables support for scanning the HTTP Basic Auth field.
3. Configure the URL filter to scan specific URLs.
The antiphish action is added to the URL filter table entry, and the URL filter is applied to the webfilter profile.
config webfilter urlfilter
edit 1
set name "antiphish-table"
config entries
edit 1
set url "www.example.com"
set type simple
set antiphish-action block
set status enable
set referrer-host ''
next
end
next
end
config webfilter profile
edit "<profile-name>"
config web
set urlfilter-table 1
end
...
next
end
FortiOS 6.4.2 Administration Guide 1046
Fortinet Inc.
Security Profiles
4. Optionally, define custom patterns to scan fields other than the built-in username and password keywords are
needed:
config webfilter profile
edit "<profile-name>"
config custom-patterns
edit "customer-name"
set category username
next
edit "customer-passwd"
set category password
next
end
end
next
end
Usage quota
In addition to using category and classification blocks and overrides to limit user access to URLs, you can set a daily
quota by category, category group, or classification. Quotas allow access for a specified length of time or a specific
bandwidth, and is calculated separately for each user. Quotas are reset everyday at midnight.
Quotas can be set only for the actions of Monitor, Warning, or Authenticate. When the quota is reached, the traffic is
blocked and the replacement page displays.
You can only use quotas when inspection mode is Proxy.
Sample topology
Sample configuration of setting a quota
This example shows setting a time quota for a category, for example, the Education category.
FortiOS 6.4.2 Administration Guide 1047
Fortinet Inc.
Security Profiles
To configure a quota in the GUI:
1. Go to Security Profiles > Web Filter and go to the FortiGuard category based filter section.
2. Open the General Interest - Personal section by selecting the + icon beside it.
3. Select Education and then select Monitor.
4. In the Category Usage Quota section, select Create New.
5. In the right pane, select the Category field and then select Education.
6. For the Quota Type, select Time and set the Total quota to 5 minute(s).
7. Select OK and the Category Usage Quota section displays the quota.
8. Validate the configuration by visiting a website in the education category, for example https://www.harvard.edu/.
You can view websites in the education category.
FortiOS 6.4.2 Administration Guide 1048
Fortinet Inc.
Security Profiles
9. Check the used and remaining quota in Monitor > FortiGuard Quota.
10. When the quota reaches its limit, traffic is blocked and the replacement page displays.
To configure a quota in the CLI:
config webfilter profile
edit "webfilter"
config ftgd-wf
unset options
config filters
edit 1
set category 30 <-- the id of education category
next
end
config quota
edit 1
set category 30
set type time
set duration 5m
next
end
end
next
end
Web content filter
You can control access to web content by blocking web pages containing specific words or patterns. This helps to
prevent access to pages with questionable material. You can specify words, phrases, patterns, wildcards and Perl
regular expressions to match content on web pages. You can use multiple web content filter lists and select the best web
content filter list for each Web Filter profile.
FortiOS 6.4.2 Administration Guide 1049
Fortinet Inc.
Security Profiles
Pattern type
When you have created the Web Filter content list, you need to add web content patterns to it. There are two types of
patterns: wildcard and regular expression.
Wildcard
Use the wildcard setting to block or exempt one word or text strings of up to 80 characters. You can also use wildcard
symbols such as ? or * to represent one or more characters. For example, a wildcard expression forti*.com matches
fortinet.com and forticare.com. The * represents any character appearing any number of times.
Regular expression
Use the regular expression setting to block or exempt patterns of Perl expressions which use some of the same symbols
as wildcard expressions but for different purposes. In regular expressions, * represents the character before the symbol.
For example, forti*.com matches fortiii.com but not fortinet.com or fortiice.com. In this case, the symbol * represents i
appearing any number of times.
The maximum number of web content patterns in a list is 5000.
Content evaluation
The web content filter feature scans the content of every web page that is accepted by a security policy. The system
administrator can specify banned words and phrases and attach a numerical value, or score, to the importance of those
words and phrases. When the web content filter scan detects banned content, it adds the scores of banned words and
phrases found on that page. If the sum is higher than a threshold set in the Web Filter profile, FortiGate blocks the page.
The default score for web content filter is 10 and the default threshold is 10. This means that by default, a web page is
blocked by a single match.
Banned words or phrases are evaluated according to the following rules:
l The score for each word or phrase is counted only once, even if that word or phrase appears many times in the web
page.
l The score for any word in a phrase without quotation marks is counted.
l The score for a phrase in quotation marks is counted only if it appears exactly as written.
Sample of applying banned pattern rules
The following table is an example of how rules are applied to the contents of a web page. For example, a web page
contains only this sentence:
The score for each word or phrase is counted only once, even if that word or phrase appears many times in the web
page.
FortiOS 6.4.2 Administration Guide 1050
Fortinet Inc.
Security Profiles
Banned Assigned Score Threshold Comment
pattern score added to score
the sum
for the
entire
page
word 20 20 20 Appears twice but only counted once. Web page is
blocked.
word phrase 20 40 20 Each word appears twice but only counted once giving
a total score of 40. Web page is blocked.
word sentence 20 20 20 “word” appears twice, “sentence” does not appear, but
since any word in a phrase without quotation marks is
counted, the score for this pattern is 20. Web page is
blocked.
"word 20 0 20 This phrase does not appear exactly as written. Web
sentence" page is allowed.
"word or 20 20 20 This phrase appears twice but is counted only once.
phrase" Web page is blocked.
Sample configuration
To configure web content filter in the GUI:
1. Go to Security Profiles > Web Filter and go to the Static URL Filter section.
2. Enable Content Filter to display its options.
3. Select Create New to display the content filter options.
FortiOS 6.4.2 Administration Guide 1051
Fortinet Inc.
Security Profiles
4. For Pattern Type, select Regular Expression and enter fortinet in the Pattern field.
l Leave Language as Western.
l Set Action to Block.
l Set Status to Enable.
5. Select OK to see the updated Static URL Filter section.
6. Validate the configuration by visiting a website with the word fortinet, for example, www.fortinet.com. The website is
blocked and a replacement page displays.
To configure web content filter in the CLI:
1. Create a content table:
config webfilter content
edit 1 <-- the id of this content
set name "webfilter"
config entries
edit "fortinet" <-- the banned word
set pattern-type regexp <-- the type is regular expression
set status enable
set lang western
set score 10 <-- the score for this word is 10
set action block
next
end
FortiOS 6.4.2 Administration Guide 1052
Fortinet Inc.
Security Profiles
next
end
2. Attach the content table to the Web Filter profile:
config webfilter profile
edit "webfilter"
config web
set bword-threshold 10 <-- the threshold is 10
set bword-table 1 <-- the id of content table we created in the previous
step
end
config ftgd-wf
unset options
end
next
end
Advanced filters 1
This topic gives examples of the following advanced filter features:
l Block malicious URLs discovered by FortiSandbox on page 1053
l Allow websites when a rating error occurs on page 1054
l Rate URLs by domain and IP address on page 1054
l Block invalid URLs on page 1055
l Rate images by URL on page 1055
Block malicious URLs discovered by FortiSandbox
To use this feature, you must be registered to a FortiSandbox and be connected to it.
This feature blocks malicious URLs that FortiSandbox finds.
For information on configuring FortiSandbox, see Using FortiSandbox Cloud with antivirus on page 1023.
To enable this feature in the GUI:
1. Go to Security Profiles > Web Filter and click Create New, or edit an existing profile.
2. Go the Static URL Filter section and enable Block malicious URLs discovered by FortiSandbox.
To enable this feature in the CLI:
config webfilter profile
edit "webfilter"
config web
set blacklist enable
end
FortiOS 6.4.2 Administration Guide 1053
Fortinet Inc.
Security Profiles
next
end
Allow websites when a rating error occurs
If you don't have a FortiGuard license but you have enabled services that need a FortiGuard license, such as FortiGuard
filter, then you'll get a rating error message.
Use this setting to allow access to websites that return a rating error from the FortiGuard Web Filter service.
To enable this feature in the GUI:
1. Go to Security Profiles > Web Filter and go to the Rating Options section.
2. Enable Allow websites when a rating error occurs.
To enable this feature in the CLI:
config webfilter profile
edit "webfilter"
config ftgd-wf
set options error-allow
end
next
end
Rate URLs by domain and IP address
If you enable this feature, in addition to only sending domain information to FortiGuard for rating, FortiGate always sends
both the URL domain name and the TCP/IP packet's IP address (except for private IP addresses) to FortiGuard for the
rating.
FortiGuard server might return a different category of IP address and URL domain. If they are different, FortiGate uses
the rating weight of the IP address or domain name to determine the rating result and decision. This rating weight is hard-
coded in FortiGate.
For example, if we use a spoof IP of Google as www.irs.gov, FortiGate will send both the IP address and domain name to
FortiGuard to get the rating. In this example, we get two different ratings, one is search engine and portals which belongs
to the IP of Google, another is government and legal organizations which belongs to www.irs.gov. As the search engine
and portals has a higher weight than government and legal organizations, this traffic will be rated as search engine and
portals and not rated as government and legal organizations.
FortiOS 6.4.2 Administration Guide 1054
Fortinet Inc.
Security Profiles
To enable this feature in the GUI:
1. Go to Security Profiles > Web Filter and go to the Rating Options section.
2. Enable Rate URLs by domain and IP address.
To enable this feature in the CLI:
config webfilter profile
edit "webfilter"
config ftgd-wf
set options rate-server-ip
end
next
end
Block invalid URLs
Use this feature to block websites when their SSL certificate CN field does not contain a valid domain name.
For example, this option blocks URLs which contains spaces. If there is a space in the URL, it must be written
as: http://www.example.com/space%20here.html.
To enable this feature in the GUI:
1. Go to Security Profiles > Web Filter and go to the Static URL Filter section.
2. Enable Block invalid URLs .
To enable this feature in the CLI:
config webfilter profile
edit "webfilter"
set options block-invalid-url
next
end
Rate images by URL
This feature enable FortiGate to retrieve ratings for individual images in addition to websites. Images in a blocked
category are not displayed even if they are part of a site in an allowed category. Blocked images are replaced with blank
placeholders. These image file types are rated: GIF, JPEG, PNG, BMP, and TIFF.
This feature requires a valid FortiGuard license, otherwise rating errors will occur. By default, this feature is enabled.
FortiOS 6.4.2 Administration Guide 1055
Fortinet Inc.
Security Profiles
For example, if the Other Adult Materials category is blocked, before enabling Rate images by URL, the image is not
blocked:
After enabling Rate images by URL, images in the Other Adult Materials category are blocked. For example:
To enable this feature in the GUI:
1. Go to Security Profiles > Web Filter and go to the Rating Options section.
2. Enable Rate images by URL.
FortiOS 6.4.2 Administration Guide 1056
Fortinet Inc.
Security Profiles
To enable this feature in the CLI:
config webfilter profile
edit "webfilter"
config ftgd-wf
unset options
set rate-image-urls enable
end
next
end
Advanced filters 2
This topic gives examples of the following advanced filter features:
l Safe search on page 1057
l YouTube education filters on page 1058
l Restrict YouTube access on page 1058
l YouTube channel filtering on page 1058
l Log all search keywords on page 1060
l Restrict Google account usage to specific domains on page 1060
l HTTP POST Action on page 1061
l Remove Java applets, remove ActiveX, and remove cookies on page 1061
These advanced filters are only available when inspection mode is Proxy.
Safe search
This feature applies to popular search sites and prevents explicit websites and images from appearing in search results.
Supported search sites are:
l Google
l Yahoo
l Bing
l Yandex
To enable this feature in the GUI:
1. Go to Security Profiles > Web Filter and go to the Search Engines section.
2. Enable Enforce 'Safe Search' on Google, Yahoo!, Bing, Yandex.
FortiOS 6.4.2 Administration Guide 1057
Fortinet Inc.
Security Profiles
To enable this feature in the CLI:
config webfilter profile
edit "webfilter"
config web
set safe-search url
end
next
end
YouTube education filters
Use these features to limit users' access to YouTube channels, such as in an education environment where you want
students and users to be able to access YouTube education videos but not other YouTube videos.
Restrict YouTube access
Formerly, YouTube for Schools was a way to access educational videos inside a school network. This YouTube feature
lets schools access educational videos on YouTube EDU and to specify the videos accessible within the school network.
When Google stopped supporting YouTube for Schools on July 1, 2016, YouTube safe search also stopped working.
Google provides information on restricting YouTube content such as Restrict YouTube content available to G Suite
users. At this time, the options Google offers to restrict inappropriate content includes: DNS, HTTP headers, and
Chromebooks..
To enable this feature in the GUI:
1. Go to Security Profiles > Web Filter and go to the Search Engines section.
2. Enable Restrict YouTube Access and select Strict or Moderate.
To enable this feature in the CLI:
config webfilter profile
edit "webfilter"
config web
set youtube-restrict strict
end
next
end
YouTube channel filtering
This Web Filter feature is also called Restrict YouTube access to specific channels. Use this feature to block or only
allow matching YouTube channels.
The following identifiers are used:
given <channel-id>, affect on:
www.youtube.com/channel/<channel-id>
www.youtube.com/user/<user-id>
FortiOS 6.4.2 Administration Guide 1058
Fortinet Inc.
Security Profiles
matches channel-id from <meta itemprop="channelId" content="UCGzuiiLdQZu9wxDNJHO_JnA">
www.youtube.com/watch?v=<string>
matches channel-id from <meta itemprop="channelId" content="UCGzuiiLdQZu9wxDNJHO_JnA">
To enable this feature in the GUI:
1. Go to Security Profiles > Web Filter and go to the Proxy Options section.
2. Enable Restrict YouTube access to specific channels.
3. Select Create New and specify the Channel ID, for example, UCGzuiiLdQZu9wxDNJHO_JnA.
4. Select OK and the option shows the Channel ID and its Link.
To enable this feature in the CLI:
config webfilter profile
edit "webfilter"
set youtube-channel-status whitelist <-- whitelist: only allow the traffic belongs to
this channel id and relative identifiers
blacklist: only block the traffic belongs to
this channel id and relative identifiers and allow the other traffic pass
config youtube-channel-filter
edit 1
set channel-id "UCGzuiiLdQZu9wxDNJHO_JnA"
next
end
FortiOS 6.4.2 Administration Guide 1059
Fortinet Inc.
Security Profiles
next
end
Log all search keywords
Use this feature to log all search phrases.
To enable this feature in the GUI:
1. Go to Security Profiles > Web Filter and go to the Search Engines section.
2. Enable Log all search keywords.
To enable this feature in the CLI:
config webfilter profile
edit "webfilter"
config web
set log-search enable
end
next
end
Restrict Google account usage to specific domains
Use this feature to block access to some Google accounts and services while allowing access to accounts in the
domains in the exception list.
To enable this feature in the GUI:
1. Go to Security Profiles > Web Filter and go to the Proxy Options section.
2. Enable Restrict Google account usage to specific domains.
3. Select the + button and enter the domains that Google can access, for example, www.fortinet.com.
FortiOS 6.4.2 Administration Guide 1060
Fortinet Inc.
Security Profiles
When you try to use Google services like Gmail, only traffic from the domain of www.fortinet.com can go through. Traffic
from other domains is blocked.
HTTP POST Action
Select the action to take with HTTP POST traffic. HTTP POST is the command used by your browser when you send
information, such as a form you have filled-out or a file you are uploading to a web server.
The action options are Allow or Block. The default is Allow.
To enable this feature in the GUI:
1. Go to Security Profiles > Web Filter and go to the Proxy Options section.
2. For HTTP POST Action, select Allow or Block.
To enable this feature in the CLI:
config webfilter profile
edit "webfilter"
set post-action [normal/block]
config ftgd-wf
unset options
end
next
end
Remove Java applets, remove ActiveX, and remove cookies
The Remove Java Applets feature filters java applets from web traffic. Websites using java applets might not function
properly if you enable this filter.
The Remove ActiveX feature filters ActiveX scripts from web traffic. Websites using ActiveX might not function properly
with if you enable this filter.
The Remove Cookies feature filters cookies from web traffic. Websites using cookies might not function properly if you
enable this filter.
FortiOS 6.4.2 Administration Guide 1061
Fortinet Inc.
Security Profiles
To enable this feature in the GUI:
1. Go to Security Profiles > Web Filter and go to the Proxy Options section.
2. Select the filters you want to use: Remove Java Applets, Remove ActiveX, and/or Remove Cookies.
To enable this feature in the CLI:
config webfilter profile
edit "webfilter"
set options activexfilter cookiefilter javafilter <-- enable one or more of
activexfilter cookiefilter javafilter.
config ftgd-wf
unset options
end
next
end
Reliable web filter statistics
FortiOS provides command line tools to view the Web Filter statistics report. These command line tools currently fall into
either proxy-based or flow-based Web Filter statistics commands.
Proxy-based Web Filter statistics report
l The proxy-based Web Filter statistics command line tools are as follows. These commands are available in both
global or per-VDOM command lines.
#diagnose wad filter <----define the interested objects for output
(global) # diagnose wad ?
console-log Send WAD log messages to the console.
debug Debug setting.
stats Show statistics.
filter Filter for listing sessions or tunnels. <----use filter to filter-out
interested object and output
kxp SSL KXP diagnostics.
user User diagnostics.
memory WAD memory diagnostics.
restore Restore configuration defaults.
history Statistics history.
FortiOS 6.4.2 Administration Guide 1062
Fortinet Inc.
Security Profiles
session Session diagnostics.
tunnel Tunnel diagnostics.
webcache Web cache statistics.
worker Worker diagnostics.
csvc Cache service diagnostics.
#diagnose wad stat filter list/clear <----list/clear Web Filter/DLP statistics
report
l In the example below, there are two VDOMs using proxy-based policies which have Web Filter profiles enabled.
The command line can be used to view the proxy-based Web Filter statistics report.
(global) # diagnose wad filter ?
list Display current filter.
clear Erase current filter settings.
src Source address range to filter by.
dst Destination address range to filter by.
sport Source port range to filter by.
dport Destination port range to filter by.
vd Virtual Domain Name. <----filter for per-vdom or global
statistics report
explicit-policy Index of explicit-policy. -1 matches all.
firewall-policy Index of firewall-policy. -1 matches all.
drop-unknown-session Enable drop message unknown sessions.
negate Negate the specified filter parameter.
protocol Select protocols to filter by.
FGT_600D-ICAP-NAT (global) # diagnose wad filter vd
<vdom> Virtual Domain Name.
ALL all vdoms
root vdom
vdom1 vdom
FGT_600D-ICAP-NAT (global) # diagnose wad filter vd root <----filter-out root vdom
statistics
Drop_unknown_session is enabled.
FGT_600D-ICAP-NAT (global) # diagnose wad stats filter list
filtering of vdom root <----Displayed the WF statistics for root vdom
dlp = 0 <----Number of Reuqest that DLP Sensor processed;
content-type = 0 <----Number of Reuqest that matching content-type filter;
urls:
examined = 6 <----Number of Request that Proxy Web-Filter(all wad daemons)
examined;
allowed = 3 <----Number of Request that be allowed in the examined requests;
blocked = 0 <----Number of Request that be blocked in the examined requests;
logged = 0 <----Number of Request that be logged in the examined requests;
overridden = 0 <----Number of Request that be overrided to another Web Filter
profile in the examined requests;
FGT_600D-ICAP-NAT (global) # diagnose wad filter vd vdom1 <----filter-out vdom1
statistics
FGT_600D-ICAP-NAT (global) # diagnose wad stats filter list
filtering of vdom vdom1 <----Displayed the WF statistics for vdom1
dlp = 0
content-type = 0
FortiOS 6.4.2 Administration Guide 1063
Fortinet Inc.
Security Profiles
urls:
examined = 13
allowed = 2
blocked = 9
logged = 8
overridden = 0
FGT_600D-ICAP-NAT (global) # diagnose wad filter vd ALL
FGT_600D-ICAP-NAT (global) # diagnose wad stats filter list
filtering of all accessible vdoms <----global statistics is sum of two VDOMs
dlp = 0
content-type = 0
urls:
examined = 19
allowed = 5
blocked = 9
logged = 8
overridden = 0
Flow-based Web Filter statistics report
l The command to check the flow-based Web Filter statistics is:
# diag webfilter stats list <vdom/global>
This command is available in both VDOM and global command lines.
l In the example below, the VDOM is using flow-based policies which have Web Filter profiles enabled.
FGT # diag webfilter stats list root
Proxy/flow URL filter stats:
request: 9474 <----Number of Requests that Flow Web-Filter(all ips engines) received;
blocked: 8606 <----Number of Request that Flow Web-Filter blocked;
allowed: 868 <----Number of Request that Flow Web-Filter allowed;
overridden:0 <----Number of Request that be overrided to another Web Filter profile in
the examined requests;
logged: 8606 <----Number of Request that be logged in the examined requests;
pending: 0 <----Number of Requests that under processing at that moment;
Flow-based web filtering
Flow-based web filtering includes the following options:
l Authenticate: requires user authentication for specific website categories.
l Warn: displays a warning message for specific website categories, but allows users to continue to the website.
l Override: allows users with valid credentials to override their web filter profile.
To enable Authenticate and Warning web filters:
1. Go to Security Profiles > Web Filter.
2. Edit an existing profile, or create a new one.
FortiOS 6.4.2 Administration Guide 1064
Fortinet Inc.
Security Profiles
3. In the FortiGuard category based filter section, right-click on a category.
4. Select the Authenticate or Warning web filter.
5. Configure other settings as needed.
6. Click Apply.
To allow users to override blocked categories:
1. Go to Security Profiles > Web Filter.
2. Edit an existing profile, or create a new one.
3. Enable Allow users to override blocked categories.
4. Enter information in the following fields:
l Groups that can override
l Profile can switch to
l Switch applies to
l Switch Duration
5. Configure other settings as needed.
FortiOS 6.4.2 Administration Guide 1065
Fortinet Inc.
Security Profiles
6. Click Apply.
URL certificate blocklist
As increasing numbers of malware have started to use SSL to attempt to bypass IPS, maintaining a fingerprint-based
certificate blocklist is useful to block botnet communication that relies on SSL.
This feature adds a dynamic package that is distributed by FortiGuard and is part of the Web Filtering service. It is
enabled by default for SSL/SSH profiles, and can be configured using the following CLI commands:
config vdom
edit <vdom>
config firewall ssl-ssh-profile
edit "certificate-inspection"
set block-blacklisted-certificates enable
next
edit "deep-inspection"
set block-blacklisted-certificates enable
next
end
next
end
FortiOS 6.4.2 Administration Guide 1066
Fortinet Inc.
Security Profiles
DNS filter
You can apply DNS category filtering to control user access to web resources. You can customize the default profile, or
create your own to manage network user access and apply it to a firewall policy, or you can add it to a DNS server on a
FortiGate interface. For more information about configuring DNS, see DNS on page 425.
DNS filtering has the following features:
l FortiGuard Filtering: filters the DNS request based on the FortiGuard domain rating.
l Botnet C&C domain blocking: blocks the DNS request for the known botnet C&C domains.
l External dynamic category domain filtering: allows you to define your own domain category.
l DNS safe search: enforces Google, Bing, and YouTube safe addresses for parental controls.
l Local domain filter: allows you to define your own domain list to block or allow.
l External IP block list: allows you to define an IP block list to block resolved IPs that match this list.
l DNS translation: maps the resolved result to another IP that you define.
DNS filtering connects to the FortiGuard secure DNS server over anycast by default. For more information about this
configuration, see DNS over TLS on page 436.
The following sample topology is used in the topics of this section. It includes an internal network and a FortiGate that is
used as a gateway device that all DNS traffic traverses.
Some features of this functionality require a subscription to FortiGuard Web Filtering.
DNS filter profiles cannot be used in security policies NGFW policy-based mode; see Profile-
based NGFW vs policy-based NGFW on page 836 for more information. They can be used in
the DNS server; see FortiGate DNS server on page 429 for more information.
The following topics provide information about DNS filters:
l Configure and apply a DNS filter profile on page 1068
l FortiGuard category-based DNS domain filtering on page 1070
l Botnet C&C domain blocking on page 1073
l DNS safe search on page 1077
l Local domain filter on page 1078
l DNS translation on page 1081
l Using a FortiGate as a DNS server on page 1084
l Troubleshooting for DNS filter on page 1086
FortiOS 6.4.2 Administration Guide 1067
Fortinet Inc.
Security Profiles
Configure and apply a DNS filter profile
To create or configure DNS Filter profile in the GUI:
1. Go to Security Profiles > DNS Filter.
2. You can modify the default DNS Filter and enable the options you want or you can click + at the top right to create a
new DNS Filter.
To create or configure DNS Filter profile in the CLI:
config dnsfilter profile
edit "demo"
set comment ''
config domain-filter
unset domain-filter-table
end
config ftgd-dns
set options error-allow
config filters
edit 2
set category 2
set action monitor
next
edit 7
set category 7
set action block
FortiOS 6.4.2 Administration Guide 1068
Fortinet Inc.
Security Profiles
next
...
edit 22
set category 0
set action monitor
next
end
end
set log-all-domain enable
set sdns-ftgd-err-log enable
set sdns-domain-log enable
set block-action redirect
set block-botnet enable
set safe-search enable
set redirect-portal 93.184.216.34
set redirect-portal6 ::
set youtube-restrict strict
next
end
After you have created the DNS Filter profile, you can apply it to the policy. DNS filters also support IPv6 policies.
To apply DNS Filter profile to the policy in the GUI:
1. Go to Policy & Objects > Firewall Policy.
2. Edit or create a new policy.
3. In the Security Profiles section, enable DNS Filter and select the DNS filter.
To apply DNS Filter profile to the policy in the CLI:
config firewall policy
edit 1
set name "Demo"
set srcintf "port10"
set dstintf "port9"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set utm-status enable
set inspection-mode proxy
set logtraffic all
FortiOS 6.4.2 Administration Guide 1069
Fortinet Inc.
Security Profiles
set fsso disable
set dnsfilter-profile "demo" <<<====
set profile-protocol-options "default"
set ssl-ssh-profile "deep-inspection"
set nat enable
next
end
FortiGuard category-based DNS domain filtering
The FortiGate must have a FortiGuard Web Filter license to use FortiGuard Category Based
Filter.
You can use the FortiGuard category-based DNS Domain Filter to inspect DNS traffic. This makes use of FortiGuard's
continually updated domain rating database for more reliable protection.
To configure FortiGuard category-based DNS Domain Filter by GUI:
1. Go to Security Profiles > DNS Filter and edit or create a DNS Filter.
2. Enable FortiGuard Category Based Filter.
3. Select the category and then select Allow, Monitor, or Block for that category.
4. If you select Block, there are two options:
l Redirect Portal IP. If the DNS query domain will be blocked, FortiGate will use portal IP to replace the resolved
IP in DNS response packet. You can use the default portal IP 208.91.112.55 or click Specify to enter another
FortiOS 6.4.2 Administration Guide 1070
Fortinet Inc.
Security Profiles
portal IP.
l Block. Blocked DNS query has no response return and the DNS query client will timeout.
To configure FortiGuard category-based DNS Domain Filter by CLI:
config dnsfilter profile
edit "demo"
set comment ''
config domain-filter
unset domain-filter-table
end
config ftgd-dns
set options error-allow
config filters <<<==== FortiGuard Category Based Filter
edit 2
set category 2
set action monitor
next
edit 7
set category 7
set action monitor
next
...
edit 22
set category 0
set action monitor
next
end
end
FortiOS 6.4.2 Administration Guide 1071
Fortinet Inc.
Security Profiles
set log-all-domain enable
set sdns-ftgd-err-log enable
set sdns-domain-log enable
set block-action redirect/block <<<==== You can specify Block or Redirect
set block-botnet enable
set safe-search enable
set redirect-portal 93.184.216.34 <<<==== Specify Redirect portal-IP.
set redirect-portal6 ::
set youtube-restrict strict
next
end
Sample
To see an example of how this works, from your internal network PC, use a command line tool such as dig or nslookup to
do DNS query for some domains, for example:
#dig www.example.com
;; ->>HEADER<<- opcode: QUERY; status: NOERROR; id: 61252
;; Flags: qr rd ra; QUERY: 1; ANSWER: 1; AUTHORITY: 13; ADDITIONAL: 11
;; QUESTION SECTION:
;; www.example.com. IN A
;; ANSWER SECTION:
www.example.com. 17164 IN A 93.184.216.34
;; AUTHORITY SECTION:
com. 20027 IN NS h.gtld-servers.net.
com. 20027 IN NS i.gtld-servers.net.
com. 20027 IN NS f.gtld-servers.net.
com. 20027 IN NS d.gtld-servers.net.
com. 20027 IN NS j.gtld-servers.net.
com. 20027 IN NS l.gtld-servers.net.
com. 20027 IN NS e.gtld-servers.net.
com. 20027 IN NS a.gtld-servers.net.
com. 20027 IN NS k.gtld-servers.net.
com. 20027 IN NS g.gtld-servers.net.
com. 20027 IN NS m.gtld-servers.net.
com. 20027 IN NS c.gtld-servers.net.
com. 20027 IN NS b.gtld-servers.net.
;; ADDITIONAL SECTION:
a.gtld-servers.net. 21999 IN A 192.5.6.30
a.gtld-servers.net. 21999 IN AAAA 2001:503:a83e::2:30
b.gtld-servers.net. 21997 IN A 192.33.14.30
b.gtld-servers.net. 21997 IN AAAA 2001:503:231d::2:30
c.gtld-servers.net. 21987 IN A 192.26.92.30
c.gtld-servers.net. 20929 IN AAAA 2001:503:83eb::30
d.gtld-servers.net. 3340 IN A 192.31.80.30
d.gtld-servers.net. 3340 IN AAAA 2001:500:856e::30
e.gtld-servers.net. 19334 IN A 192.12.94.30
e.gtld-servers.net. 19334 IN AAAA 2001:502:1ca1::30
f.gtld-servers.net. 3340 IN A 192.35.51.30
;; Received 509 B
FortiOS 6.4.2 Administration Guide 1072
Fortinet Inc.
Security Profiles
;; Time 2019-04-05 09:39:33 PDT
;; From 172.16.95.16@53(UDP) in 3.8 ms
To check the DNS Filter log in the GUI:
1. Go to Log & Report > DNS Query to view the DNS traffic that just traverse the FortiGate and the FortiGuard rating
for this domain name.
To check the DNS log in the CLI:
#execute log filter category utm-dns
# execute log display
2 logs found.
2 logs returned.
1: date=2019-04-05 time=09:39:34 logid="1501054802" type="utm" subtype="dns" eventtype="dns-
response" level="notice" vd="vdom1" eventtime=1554482373 policyid=1 sessionid=50868
srcip=10.1.100.18 srcport=34308 srcintf="port10" srcintfrole="undefined" dstip=172.16.95.16
dstport=53 dstintf="port9" dstintfrole="undefined" proto=17 profile="demo" xid=17647
qname="www.example.com" qtype="A" qtypeval=1 qclass="IN" ipaddr="93.184.216.34" msg="Domain
is monitored" action="pass" cat=52 catdesc="Information Technology"
2: date=2019-04-05 time=09:39:34 logid="1500054000" type="utm" subtype="dns" eventtype="dns-
query" level="information" vd="vdom1" eventtime=1554482373 policyid=1 sessionid=50868
srcip=10.1.100.18 srcport=34308 srcintf="port10" srcintfrole="undefined" dstip=172.16.95.16
dstport=53 dstintf="port9" dstintfrole="undefined" proto=17 profile="demo" xid=17647
qname="www.example.com" qtype="A" qtypeval=1 qclass="IN"
Botnet C&C domain blocking
FortiGuard Service continually updates the Botnet C&C domain list (Domain DB). The botnet C&C domain blocking
feature can block the botnet website access at the DNS name resolving stage. This provides additional protection for
your network.
FortiOS 6.4.2 Administration Guide 1073
Fortinet Inc.
Security Profiles
To configure botnet C&C domain blocking in the GUI:
1. Go to Security Profiles > DNS Filter and edit or create a DNS Filter.
2. Enable Redirect botnet C&C requests to Block Portal.
3. Click the botnet package link to see the latest botnet C&C domain list.
Sample
To see an example of how this works, select a botnet domain from that list. Then from your internal network PC, use a
command line tool such as dig or nslookup to send a DNS query to traverse the FortiGate to see the query blocked as a
botnet domain. For example:
#dig canind.co
;; ->>HEADER<<- opcode: QUERY; status: NOERROR; id: 997
;; Flags: qr rd; QUERY: 1; ANSWER: 1; AUTHORITY: 0; ADDITIONAL: 0
;; QUESTION SECTION:
;; canind.co. IN A
;; ANSWER SECTION:
canind.co. 60 IN A 208.91.112.55 <<<==== botnet domain query
blocked, redirect with portal-IP.
;; Received 43 B
FortiOS 6.4.2 Administration Guide 1074
Fortinet Inc.
Security Profiles
;; Time 2019-04-05 09:55:21 PDT
;; From 172.16.95.16@53(UDP) in 0.3 ms
To check the DNS Filter log in the GUI:
1. Go to Log & Report > DNS Query to view the DNS query blocked as a botnet domain.
To check the DNS Filter log in the CLI:
(vdom1) # execute log filter category utm-dns
(vdom1) # execute log display
2 logs found.
2 logs returned.
1: date=2019-04-04 time=16:43:59 logid="1501054601" type="utm" subtype="dns" eventtype="dns-
response" level="warning" vd="vdom1" eventtime=1554421439 policyid=1 sessionid=14135
srcip=10.1.100.18 srcport=57447 srcintf="port10" srcintfrole="undefined" dstip=172.16.95.16
dstport=53 dstintf="port9" dstintfrole="undefined" proto=17 profile="demo" xid=24339
qname="canind.co" qtype="A" qtypeval=1 qclass="IN" msg="Domain was blocked by dns botnet
C&C" action="redirect" botnetdomain="canind.co"
2: date=2019-04-04 time=16:43:59 logid="1500054000" type="utm" subtype="dns" eventtype="dns-
query" level="information" vd="vdom1" eventtime=1554421439 policyid=1 sessionid=14135
srcip=10.1.100.18 srcport=57447 srcintf="port10" srcintfrole="undefined" dstip=172.16.95.16
dstport=53 dstintf="port9" dstintfrole="undefined" proto=17 profile="demo" xid=24339
qname="canind.co" qtype="A" qtypeval=1 qclass="IN"
Botnet C&C IPDB blocking
FortiGate also maintains a botnet C&C IP address database (botnet IPDB). If a DNS query response IP address
(resolved IP address) matches an entry inside the botnet IPDB, this DNS query is also blocked by DNS Filter botnet C&C
blocking.
To view the botnet IPDB list in the CLI:
(global) # diagnose sys botnet list 9000 10
9000. proto=TCP ip=103.228.28.166, port=80, rule_id=7630075, name_id=3, hits=0
9001. proto=TCP ip=5.9.32.166, port=481, rule_id=4146631, name_id=7, hits=0
9002. proto=TCP ip=91.89.44.166, port=80, rule_id=48, name_id=96, hits=0
9003. proto=TCP ip=46.211.46.166, port=80, rule_id=48, name_id=96, hits=0
9004. proto=TCP ip=77.52.52.166, port=80, rule_id=48, name_id=96, hits=0
9005. proto=TCP ip=98.25.53.166, port=80, rule_id=48, name_id=96, hits=0
9006. proto=TCP ip=70.120.67.166, port=80, rule_id=48, name_id=96, hits=0
9007. proto=TCP ip=85.253.77.166, port=80, rule_id=48, name_id=96, hits=0
FortiOS 6.4.2 Administration Guide 1075
Fortinet Inc.
Security Profiles
9008. proto=TCP ip=193.106.81.166, port=80, rule_id=48, name_id=96, hits=0
9009. proto=TCP ip=58.13.84.166, port=80, rule_id=48, name_id=96, hits=0
To see an example of how DNS Filter botnet C&C IPDB blocking works, select an IP address from the IPDB list and use
Internet reverse lookup service to find its corresponding domain name. Then from your internal network PC, use a
command line tool such as dig or nslookup to query this domain and see that it's blocked by DNS Filter botnet C&C
blocking. For example:
# dig cpe-98-25-53-166.sc.res.rr.com
;; ->>HEADER<<- opcode: QUERY; status: NOERROR; id: 35135
;; Flags: qr rd; QUERY: 1; ANSWER: 1; AUTHORITY: 0; ADDITIONAL: 0
;; QUESTION SECTION:
;; cpe-98-25-53-166.sc.res.rr.com. IN A
;; ANSWER SECTION:
cpe-98-25-53-166.sc.res.rr.com. 60 IN A 208.91.112.55 <<<==== Since
resolved IP address match the botnet IPDB, dns query blocked with redirect portal IP.
;; Received 64 B
;; Time 2019-04-05 11:06:47 PDT
;; From 172.16.95.16@53(UDP) in 0.6 ms
To check the DNS Filter log in the GUI:
1. Go to Log & Report > DNS Query to view the DNS query blocked by botnet C&C IPDB blocking.
To check the DNS Filter log in the CLI:
1: date=2019-04-05 time=11:06:48 logid="1501054600" type="utm" subtype="dns" eventtype="dns-
response" level="warning" vd="vdom1" eventtime=1554487606 policyid=1 sessionid=55232
srcip=10.1.100.18 srcport=60510 srcintf="port10" srcintfrole="undefined" dstip=172.16.95.16
dstport=53 dstintf="port9" dstintfrole="undefined" proto=17 profile="demo" xid=16265
qname="cpe-98-25-53-166.sc.res.rr.com" qtype="A" qtypeval=1 qclass="IN"
ipaddr="93.184.216.34" msg="Domain was blocked by dns botnet C&C" action="redirect"
botnetip=98.25.53.166
2: date=2019-04-05 time=11:06:48 logid="1500054000" type="utm" subtype="dns" eventtype="dns-
query" level="information" vd="vdom1" eventtime=1554487606 policyid=1 sessionid=55232
srcip=10.1.100.18 srcport=60510 srcintf="port10" srcintfrole="undefined" dstip=172.16.95.16
dstport=53 dstintf="port9" dstintfrole="undefined" proto=17 profile="demo" xid=16265
qname="cpe-98-25-53-166.sc.res.rr.com" qtype="A" qtypeval=1 qclass="IN"
To check botnet activity:
1. Go to Dashboard > Status and see the Botnet Activity widget.
If you cannot find the Botnet Activity widget, click the Settings button at the bottom right, select Add Widget, and add
the Botnet Activity widget.
FortiOS 6.4.2 Administration Guide 1076
Fortinet Inc.
Security Profiles
DNS safe search
Enable DNS Filter safe search so that FortiGate responds with the search engine's children and school safe domain or
IP address. Users might not be aware of this filter. Explicit contents are filtered by the search engine itself. This feature
isn’t 100% accurate but it can help you avoid explicit and inappropriate search results.
This feature currently supports Google, Bing, and YouTube.
To configure DNS Filter Safe Search on GUI:
1. Go to Security Profiles > DNS Filter and edit or create a DNS Filter.
2. Enable Enforce 'Safe search' on Google, Bing, YouTube.
3. For Restrict YouTube Access, select Strict or Moderate.
To configure DNS Filter Safe Search on CLI:
config dnsfilter profile
edit "demo"
config ftgd-dns
set options error-allow
config filters
edit 2
set category 2
next
...
end
end
set log-all-domain enable
set block-botnet enable
set safe-search enable <<<==== DNS Filter Safe Search option
next
end
Sample
To see an example of how this works, enable this option. Then from your internal network PC, use a command line tool
such as dig or nslookup to do a DNS query on www.bing.com. For example:
FortiOS 6.4.2 Administration Guide 1077
Fortinet Inc.
Security Profiles
# dig www.bing.com
;; ->>HEADER<<- opcode: QUERY; status: NOERROR; id: 46568
;; Flags: qr rd ra; QUERY: 1; ANSWER: 2; AUTHORITY: 0; ADDITIONAL: 0
;; QUESTION SECTION:
;; www.bing.com. IN A
;; ANSWER SECTION:
www.bing.com. 103 IN CNAME strict.bing.com. <<<====
strict.bing.com. 103 IN A 204.79.197.220
;; Received 67 B
;; Time 2019-04-05 14:34:52 PDT
;; From 172.16.95.16@53(UDP) in 196.0 ms
The DNS query for www.bing.com returns with a CNAME strict.bing.com, and A record for the CNAME. The user's web
browser then connects to this address with the same search engine UI but any explicit content search is filtered out.
Check the DNS Filter log for the message DNS Safe Search enforced.
To check the DNS Filter Safe Search log in the CLI:
1: date=2019-04-05 time=14:34:53 logid="1501054804" type="utm" subtype="dns" eventtype="dns-
response" level="notice" vd="vdom1" eventtime=1554500093 policyid=1 sessionid=65955
srcip=10.1.100.18 srcport=36575 srcintf="port10" srcintfrole="undefined" dstip=172.16.95.16
dstport=53 dstintf="port9" dstintfrole="undefined" proto=17 profile="demo" xid=59573
qname="www.bing.com" qtype="A" qtypeval=1 qclass="IN" ipaddr="204.79.197.220" msg="DNS Safe
Search enforced" action="pass" sscname="strict.bing.com" cat=41 catdesc="Search Engines and
Portals"
2: date=2019-04-05 time=14:34:53 logid="1500054000" type="utm" subtype="dns" eventtype="dns-
query" level="information" vd="vdom1" eventtime=1554500092 policyid=1 sessionid=65955
srcip=10.1.100.18 srcport=36575 srcintf="port10" srcintfrole="undefined" dstip=172.16.95.16
dstport=53 dstintf="port9" dstintfrole="undefined" proto=17 profile="demo" xid=59573
qname="www.bing.com" qtype="A" qtypeval=1 qclass="IN"
Additional information
For each search engine's safe search specifications, see its specification page:
l https://help.bing.microsoft.com/#apex/18/en-US/10003/0
l https://support.google.com/websearch/answer/510?co=GENIE.Platform%3DDesktop&hl=en
l https://support.google.com/youtube/answer/174084?co=GENIE.Platform%3DDesktop&hl=en
Local domain filter
In addition to FortiGuard's category-based domain filter, you can also can define your own local static domain filter to
allow or block specific domains.
FortiOS 6.4.2 Administration Guide 1078
Fortinet Inc.
Security Profiles
To configure DNS local domain filter on GUI:
1. Go to Security Profiles > DNS Filter and edit or create a DNS Filter.
2. In the Static Domain Filter section, enable Domain Filter.
3. Click Create New to create your local domain filter entries.
To configure DNS local domain filter on CLI:
config dnsfilter domain-filter
edit 1
set name "demo"
set comment ''
config entries
edit 1
set domain "www.fortinet.com"
set type simple
set action allow
set status enable
next
edit 2
set domain "*.example.com"
set type wildcard
set action block
set status enable
next
edit 3
set domain "google"
set type regex
set action monitor
set status enable
next
end
next
end
FortiOS 6.4.2 Administration Guide 1079
Fortinet Inc.
Security Profiles
Wildcard entries are converted to regular expressions by FortiOS. As a result of this
conversion, wildcards will match any suffix, as long as there is a word boundary following the
search term.
For example:
config entries
edit 1
set domain "*.host"
set type wildcard
next
end
will match wp36.host and wp36.host.pressdns.com, but not
wp36.host123.pressdnds.com.
To avoid this, use an explicit regular expression search string:
config entries
edit 1
set domain "^.*\\.host$"
set type regexp
next
end
To check the DNS local domain filter log in the GUI:
1. Go to Log & Report > DNS Query to view the DNS query log.
Since the local domain list "google" action is Monitor, it's blocked by FortiGuard category-based domain filter.
To check the DNS local domain filter log in the CLI:
7: date=2019-04-05 time=15:37:06 logid="1501054803" type="utm" subtype="dns" eventtype="dns-
response" level="warning" vd="vdom1" eventtime=1554503826 policyid=1 sessionid=69132
srcip=10.1.100.18 srcport=49832 srcintf="port10" srcintfrole="undefined" dstip=172.16.95.16
dstport=53 dstintf="port9" dstintfrole="undefined" proto=17 profile="demo" xid=4612
qname="www.google.com" qtype="A" qtypeval=1 qclass="IN" ipaddr="208.91.112.55" msg="Domain
belongs to a denied category in policy" action="redirect" cat=41 catdesc="Search Engines and
Portals"
8: date=2019-04-05 time=15:37:06 logid="1500054000" type="utm" subtype="dns" eventtype="dns-
query" level="information" vd="vdom1" eventtime=1554503826 policyid=1 sessionid=69132
srcip=10.1.100.18 srcport=49832 srcintf="port10" srcintfrole="undefined" dstip=172.16.95.16
dstport=53 dstintf="port9" dstintfrole="undefined" proto=17 profile="demo" xid=4612
qname="www.google.com" qtype="A" qtypeval=1 qclass="IN"
9: date=2019-04-05 time=15:36:59 logid="1501054400" type="utm" subtype="dns" eventtype="dns-
response" level="warning" vd="vdom1" eventtime=1554503818 policyid=1 sessionid=69121
FortiOS 6.4.2 Administration Guide 1080
Fortinet Inc.
Security Profiles
srcip=10.1.100.18 srcport=40659 srcintf="port10" srcintfrole="undefined" dstip=172.16.95.16
dstport=53 dstintf="port9" dstintfrole="undefined" proto=17 profile="demo" xid=24730
qname="www.example.com" qtype="A" qtypeval=1 qclass="IN" msg="Domain was blocked because it
is in the domain-filter list" action="redirect" domainfilteridx=1 domainfilterlist="demo"
10: date=2019-04-05 time=15:36:59 logid="1500054000" type="utm" subtype="dns"
eventtype="dns-query" level="information" vd="vdom1" eventtime=1554503818 policyid=1
sessionid=69121 srcip=10.1.100.18 srcport=40659 srcintf="port10" srcintfrole="undefined"
dstip=172.16.95.16 dstport=53 dstintf="port9" dstintfrole="undefined" proto=17
profile="demo" xid=24730 qname="www.example.com" qtype="A" qtypeval=1 qclass="IN"
11: date=2019-04-05 time=15:36:51 logid="1501054401" type="utm" subtype="dns"
eventtype="dns-response" level="information" vd="vdom1" eventtime=1554503810 policyid=1
sessionid=69118 srcip=10.1.100.18 srcport=33461 srcintf="port10" srcintfrole="undefined"
dstip=172.16.95.16 dstport=53 dstintf="port9" dstintfrole="undefined" proto=17
profile="demo" xid=53801 qname="www.fortinet.com" qtype="A" qtypeval=1 qclass="IN"
ipaddr="13.56.55.78, 54.183.57.55" msg="Domain was allowed because it is in the domain-
filter list" action="pass" domainfilteridx=1 domainfilterlist="demo"
12: date=2019-04-05 time=15:36:51 logid="1500054000" type="utm" subtype="dns"
eventtype="dns-query" level="information" vd="vdom1" eventtime=1554503810 policyid=1
sessionid=69118 srcip=10.1.100.18 srcport=33461 srcintf="port10" srcintfrole="undefined"
dstip=172.16.95.16 dstport=53 dstintf="port9" dstintfrole="undefined" proto=17
profile="demo" xid=53801 qname="www.fortinet.com" qtype="A" qtypeval=1 qclass="IN"
Sequence and priority
In DNS Filter, local domain filter has a higher priority than FortiGuard category-based domain filter.
A DNS query is scanned and matched with local domain filter first. If an entry matches and the local filter entry's action is
block, then that DNS query is blocked or redirected.
If local domain filter list has no match, then the FortiGuard category-based domain filter is used. If a DNS query domain
name rating belongs to the block category, this query is blocked or redirected. If the FortiGuard category-based filter has
no match, then the original resolved IP address is returned to the client DNS resolver.
The local domain filter action can be Block, Allow, or Monitor. If the local domain filter action is Allow and an entry
matches, it will skip the FortiGuard category-based domain filter and directly return to client DNS resolver. If the local
domain filter action is Monitor and an entry matches, it will go to FortiGuard category-based domain filter scanning and
matching.
DNS translation
Using this feature, you can translate a DNS resolved IP address to another IP address you specify on a per-policy basis.
For example, website A has a public address 1.2.3.4. However, when your internal network users visit this website, you
want them to connect to an internal host, say, 192.168.3.4. In this case, you can use DNS translation to translate the
DNS resolved address 1.2.3.4 to 192.168.3.4. Reverse use of DNS translation is also applicable, for example, if you
want public DNS query of your internal server to get a public IP address, then you can translate a DNS resolved private
IP to a public IP address.
FortiOS 6.4.2 Administration Guide 1081
Fortinet Inc.
Security Profiles
Example
This example configuration forces the DNS Filter profile to translate 93.184.216.34 (www.example.com) to 192.168.3.4.
When internal network users do a DNS query for www.example.com, they do not get the original www.example.com IP
address of 93.184.216.34. Instead, it is replaced with 192.168.3.4.
To configure DNS translation in the GUI:
1. Go to Security Profiles > DNS Filter and edit or create a DNS Filter profile.
2. Enable DNS Translation and click Create New.
3. Enter the Original Destination (the domain's original IP address), the Translated Destination IP address, and the
Network Mask, and set Status to Enable.
4. Click OK.
5. Click OK to create or edit the DNS profile.
To configure DNS translation in the CLI:
config dnsfilter profile
edit "demo"
set comment ''
...
config dns-translation
edit 1
set src 93.184.216.34
set dst 192.168.3.4
set netmask 255.255.255.255
next
FortiOS 6.4.2 Administration Guide 1082
Fortinet Inc.
Security Profiles
end
set redirect-portal 0.0.0.0
set redirect-portal6 ::
set youtube-restrict strict
next
end
To check DNS translation using a command line tool before DNS translation:
# dig www.example.com
;; ->>HEADER<<- opcode: QUERY; status: NOERROR; id: 27030
;; Flags: qr rd ra; QUERY: 1; ANSWER: 1; AUTHORITY: 2; ADDITIONAL: 0
;; QUESTION SECTION:
;; www.example.com. IN A
;; ANSWER SECTION:
www.example.com. 33946 IN A 93.184.216.34
;; AUTHORITY SECTION:
example.com. 18578 IN NS b.iana-servers.net.
example.com. 18578 IN NS a.iana-servers.net.
;; Received 97 B
;; Time 2019-04-08 10:47:26 PDT
;; From 172.16.95.16@53(UDP) in 0.5 ms
To check DNS translation using a command line tool after DNS translation:
# dig www.example.com
;; ->>HEADER<<- opcode: QUERY; status: NOERROR; id: 62060
;; Flags: qr rd ra; QUERY: 1; ANSWER: 1; AUTHORITY: 2; ADDITIONAL: 0
;; QUESTION SECTION:
;; www.example.com. IN A
;; ANSWER SECTION:
www.example.com. 32491 IN A 192.168.3.4 <<<==== resolved IP translated
into 192.168.3.4
;; AUTHORITY SECTION:
example.com. 17123 IN NS b.iana-servers.net.
example.com. 17123 IN NS a.iana-servers.net.
;; Received 97 B
;; Time 2019-04-08 11:11:41 PDT
;; From 172.16.95.16@53(UDP) in 0.5 ms
DNS translation network mask
The following is an example of DNS translation and result:
config dns-translation
edit 1
set src 93.184.216.34
set dst 1.2.3.4
FortiOS 6.4.2 Administration Guide 1083
Fortinet Inc.
Security Profiles
set netmask 255.255.224.0
next
end
# dig www.example.com
;; ->>HEADER<<- opcode: QUERY; status: NOERROR; id: 6736
;; Flags: qr rd ra; QUERY: 1; ANSWER: 1; AUTHORITY: 2; ADDITIONAL: 0
;; QUESTION SECTION:
;; www.example.com. IN A
;; ANSWER SECTION:
www.example.com. 29322 IN A 1.2.24.34
;; AUTHORITY SECTION:
example.com. 13954 IN NS a.iana-servers.net.
example.com. 13954 IN NS b.iana-servers.net.
;; Received 97 B
;; Time 2019-04-08 12:04:30 PDT
;; From 172.16.95.16@53(UDP) in 2.0 ms
1) AND src(Orginal IP) with negative netmask (93.184.216.34 & ~255.255.224.0)
01011101.10111000.11011000.00100010 93.184.216.34 <-- ip
00000000.00000000.00011111.11111111 ~255.255.224.0 <-- ~netmask
-------------------------------------------------------- &
00000000.00000000.00011000.00100010 0.0.24.34 <- right bits
2) AND dst(Translated IP) with netmask
00000001.00000010.00000011.00000100 1.2.3.4 <- dst
11111111.11111111.11100000.00000000 255.255.224.0 <- netmask
-------------------------------------------------------- &
00000001.00000010.00000000.00000000 1.2.0.0 <- left bits
3) Final step 2 bitwise-OR 3:
00000000.00000000.00011000.00100010 0.0.24.34
00000001.00000010.00000000.00000000 1.2.0.0
-------------------------------------------------------- |
00000001.00000010.00011000.00100010 1.2.24.34
Using a FortiGate as a DNS server
You can configure and use FortiGate as a DNS server in your network. When you enable DNS Service on a specific
interface, FortiGate will listen for DNS Service on that interface.
Depending on the configuration, DNS Service on FortiGate can work in three modes: Recursive, Non-Recursive, or
Forward to System DNS (server). For details on how to configure DNS Service on FortiGate, see the FortiGate System
Configuration Guide.
You can apply a DNS Filter profile to Recursive Mode and Forward to System DNS Mode. This is the same as FortiGate
working as a transparent DNS Proxy for DNS relay traffic.
FortiOS 6.4.2 Administration Guide 1084
Fortinet Inc.
Security Profiles
To configure DNS Service on FortiGate using GUI:
1. Go to Network > DNS Servers.
2. In the DNS Service on Interface, click Create New and select an Interface.
The Recursive and Non-Recursive Mode is available only after you configure the DNS database.
To configure DNS Service on FortiGate using CLI:
config system dns-server
edit "port10" <<<==== Enable DNS Serive on Interface
set mode forward-only
set dnsfilter-profile "demo" <<<==== apply DNS Filter Profile for the service
next
end
Sample configuration
In this example, FortiGate port 10 is enabled as a DNS Service with the DNS Filter profile "demo". Suppose port 10 has
an IP address 10.1.100.5 and DNS Filter profile "demo" is set to block category 52 (Information Technology), then from
your internal network PC, use a command line tool such as dig or nslookup to do a DNS query. For example:
# dig @10.1.100.5 www.fortinet.com <<<====Specify FortiGate interface address as DNS
Server
;; ->>HEADER<<- opcode: QUERY; status: NOERROR; id: 52809
;; Flags: qr rd; QUERY: 1; ANSWER: 1; AUTHORITY: 0; ADDITIONAL: 0
;; QUESTION SECTION:
;; www.fortinet.com. IN A
;; ANSWER SECTION:
www.fortinet.com. 60 IN A 208.91.112.55 <<<==== DNS Filter profile
will filter the relay DNS traffic based on profile configuration. It blocked with redirect
portal IP
;; Received 50 B
FortiOS 6.4.2 Administration Guide 1085
Fortinet Inc.
Security Profiles
;; Time 2019-04-08 14:36:34 PDT
;; From 10.1.100.5@53(UDP) in 13.6 ms
Troubleshooting for DNS filter
If you have trouble with the DNS Filter profile in your policy, start with the following troubleshooting steps:
l Check the connection between FortiGate and FortiGuard DNS rating server (SDNS server).
l Check that FortiGate has a valid FortiGuard Web Filter license.
l Check the FortiGate DNS Filter configuration.
Troubleshooting connection between FortiGate and FortiGuard SDNS server
Ensure FortiGate can connect to the FortiGuard SDNS server. By default, FortiGate uses UDP port 53 to connect to the
SDNS server.
To check the connection between FortiGate and the SDNS server in the CLI:
1. In the CLI Console, run the diagnose test application dnsproxy 3 command to find the FortiGuard
SDNS server.
...
FDG_SERVER:208.91.112.220:53
FGD_CATEGORY_VERSION:8
SERVER_LDB: gid=6f00, tz=-420, error_allow=0
FGD_REDIR:208.91.112.55
2. Check the FDG_SERVER line. The SDNS server IP address might be different depending on location. For this
example, it is:
FDG_SERVER:208.91.112.220:53
3. In the CLI Console under the management VDOM, run the command execute ping 208.91.112.220 to check
the communication between the FortiGate and the SDNS server.
4. Optionally, you can also check the communication using a PC on the internal network.
a. Disable the DNS Filter profile so that it does not affect your connection check.
b. Ping your ISP or a public DNS service provides's DNS server, for example, Google's public DNS server of
8.8.8.8:
#dig @8.8.8.8 www.fortinet.com
Or specify the SDNS server as DNS server:
#dig @208.91.112.220 www.fortinet.com
c. Check that you can get domain www.fortinet.com A record from the DNS server which shows that UDP port 53
connection path is not blocked.
#dig @8.8.8.8 www.fortinet.com
;; ->>HEADER<<- opcode: QUERY; status: NOERROR; id: 35121
;; Flags: qr rd ra; QUERY: 1; ANSWER: 3; AUTHORITY: 0; ADDITIONAL: 0
;; QUESTION SECTION:
;; www.fortinet.com. IN A
FortiOS 6.4.2 Administration Guide 1086
Fortinet Inc.
Security Profiles
;; ANSWER SECTION:
www.fortinet.com. 289 IN CNAME fortinet-prod4-858839915.us-west-
1.elb.amazonaws.com.
fortinet-prod4-858839915.us-west-1.elb.amazonaws.com. 51 IN A
52.8.142.247
fortinet-prod4-858839915.us-west-1.elb.amazonaws.com. 51 IN A
13.56.55.78
;; Received 129 B
;; Time 2019-04-29 14:13:18 PDT
;; From 8.8.8.8@53(UDP) in 13.2 ms
Checking FortiGuard DNS Rating Service license
The FortiGuard DNS Rating Service shares the license with FortiGuard Web Filter so you must have a valid Web Filter
license for the DNS Rating Service to work. While the license is shared, the DNS Rating Service uses a separate
connection mechanism from the Web Filter Rating.
To check the DNS Rating Service license in the CLI:
1. In the CLI Console, run the command diagnose test application dnsproxy 3.
2. Look for the LICENSE line and check that the license has not expired, for example:
LICENSE: expiry=2029-08-21, expired=0, type=2
3. Check the dns-server lines. Some dns-server lines show secure=1 ready=1. These lines show the
functioning SDNS servers. For example:
dns-server:208.91.112.220:53 tz=-480 req=7 to=0 res=7 rt=1 secure=1 ready=1 timer=0
probe=0 failure=0 last_failed=0
Checking FortiGate DNS Filter profile configuration
To check the FortiGate DNS Filter profile configuration:
1. Create a local domain filter and set the Action to Redirect to Block Portal.
See Local domain filter on page 1078.
2. Apply this DNS Filter profile to the policy.
3. From the client PC, DNS query this domain.
If you get the profile's redirected portal address, that shows that the DNS Filter profile works as expected.
More troubleshooting steps
To reload the DNS proxy in the CLI:
(global)#diagnose test application dnsproxy 99
To debug DNS proxy details:
These commands might create more output in your console.
FortiOS 6.4.2 Administration Guide 1087
Fortinet Inc.
Security Profiles
#diagnose debug application dnsproxy -1
#diagnose debug enable/disable
DNS proxy command reference
Use the following diagnose test application dnsproxy command line options to check DNS proxy status and
help with troubleshooting.
(global) # diagnose test application dnsproxy ?
worker idx: 0
1. Clear DNS cache
2. Show stats
3. Dump DNS setting
4. Reload FQDN
5. Requery FQDN
6. Dump FQDN
7. Dump DNS cache
8. Dump DNS DB
9. Reload DNS DB
10. Dump secure DNS policy/profile
11. Dump Botnet domain
12. Reload Secure DNS setting
13. Show Hostname cache
14. Clear Hostname cache
15. Show SDNS rating cache
16. Clear SDNS rating cache
17. DNS debug bit mask
99. Restart dnsproxy worker
Application control
FortiGates can recognize network traffic generated by a large number of applications. Application control sensors
specify what action to take with the application traffic. Application control uses IPS protocol decoders that can analyze
network traffic to detect application traffic, even if the traffic uses non-standard ports or protocols. Application control
supports traffic detection using the HTTP protocol (versions 1.0, 1.1, and 2.0).
FortiOS includes three preloaded application sensors:
l default (monitors all applications)
l wifi-default (default configuration for offloading WiFi traffic)
FortiOS 6.4.2 Administration Guide 1088
Fortinet Inc.
Security Profiles
l block-high-risk
You can customize these sensors, or you can create your own to log and manage the applications on your network.
Once configured, you can add the application sensor to a firewall policy.
This functionality requires a subscription to FortiGuard Application Control.
The following topics provide information about application control:
l Basic category filters and overrides on page 1089
l Port enforcement check on page 1093
l Protocol enforcement on page 1093
l SSL-based application detection over decrypted traffic in a sandwich topology on page 1095
l Matching multiple parameters on application control signatures on page 1096
Basic category filters and overrides
Once you have created an application sensor, you can define the applications that you want to control. You can add
applications and filters using categories, application overrides, and/or filter overrides.
l Categories: Choose groups of signatures based on a category type.
l Application overrides: Choose individual applications.
l Filter overrides: Select groups of applications and override the application signature settings for them.
Categories
Categories allow you to choose groups of signatures based on a category type. Applications belonging to the category
trigger the action that is set for the category.
To set category filters in the CLI:
config application list
edit {id}
config entries
edit 1
set category <id>
ID Select Category ID
2 P2P
3 VoIP
5 Video/Audio
6 Proxy
7 Remote.Access
8 Game
12 General.Interest
15 Network.Service
17 Update
21 Email
22 Storage.Backup
23 Social.Media
FortiOS 6.4.2 Administration Guide 1089
Fortinet Inc.
Security Profiles
25 Web.Client
26 Industrial
28 Collaboration
29 Business
30 Cloud.IT
31 Mobile
set action {pass | block | reset}
pass Pass or allow matching traffic.
block Block or drop matching traffic.
reset Reset sessions for matching traffic.
set log {enable | disable}
next
end
next
end
To set category filters in the GUI:
1. Go to Security Profiles > Application Control.
2. Under Categories, left click the icon next to the category name to view a dropdown of actions:
l Allow
l Monitor
l Block
l Quarantine
l View signatures
3. Select OK.
Application and filter overrides
Override type Setting
Application Type: Choose Application for application overrides.
Action: Can be set to Monitor/Allow/Block/Quarantine.
FortiOS 6.4.2 Administration Guide 1090
Fortinet Inc.
Security Profiles
Override type Setting
Application: Multiple app signatures can be added for one entry. A slide-in
presenting an application list will be shown to select specific app signatures, and
the search box can be used to filter matched signatures.
Filter Type: Choose Filter for filter overrides.
Action: Can be set to Monitor/Allow/Block/Quarantine.
Filter: Filters can be selected by behavior, application category, technology,
popularity, protocol, risk, or vendor subtypes.
Search box: Can be used to determine if the input signature is included in
selected filters, where matched applications are shown at the bottom.
To set overrides in the CLI:
config application list
edit {id}
config entries
edit 1
set protocols <0-47> #network protocol ID
set risk <id>
*level Risk of allowing traffic from this application to occur (1 -
5; Low, Elevated, Medium, High, and Critical).
set vendor <0-25> #vendor ID
set technology <id>
All All
0 Network-Protocol
1 Browser-Based
2 Client-Server
4 Peer-to-Peer
set behavior <id>
All All
2 Botnet
3 Evasive
5 Excessive-Bandwidth
6 Tunneling
9 Cloud
set popularity <1-5> #Popularity level 1-5
set action {pass | block | reset}
pass Pass or allow matching traffic.
block Block or drop matching traffic.
reset Reset sessions for matching traffic.
set log {enable | disable}
next
end
next
end
To set overrides in the GUI:
1. Go to Security Profiles > Application Control.
2. Under the Application and Filter Overrides table, click Create New.
FortiOS 6.4.2 Administration Guide 1091
Fortinet Inc.
Security Profiles
3. To add individual applications:
a. Select Application as the Type.
b. Choose an action to be associated with the application.
c. Click the + button in the Application field and choose the specific applications from the list where app signatures
are displayed. Multiple applications may be selected.
d. Click OK.
4. To add advanced filters:
a. Create another entry in the Application and Filter Overrides table.
b. Select Filter as the Type.
c. Select Cloud under the behavior section from the Select Entries list.
Matched signatures are shown along the bottom.
d. Click OK.
FortiOS 6.4.2 Administration Guide 1092
Fortinet Inc.
Security Profiles
Port enforcement check
Most networking applications run on specific ports. For example, SSH runs on port 22, and Facebook runs on ports 80
and 443.
If the default network service is enabled in the Application Control profile, a port enforcement check is done at the
application profile level, and any detected application signatures running on the non-standard TCP/IP port are blocked.
This means that each application allowed by the app control sensor is only run on its default port.
To set port enforcement check in the CLI:
config application list
edit "default_port"
set enforce-default-app-port {enable | disable}
disable Disable default application port enforcement.
enable Enable default application port enforcement.
config entries
edit 1
set application 15896
set action pass
next
end
next
end
For example, when applying the above appctrl sensor, FTP traffic with the standard port (port 21) is allowed, while the
non-standard port (port 2121) is blocked.
Protocol enforcement
Protocol enforcement allows you to configure networking services (e.g. FTP, HTTP, HTTPS) on known ports (e.g. 21,
80, 443). For protocols that are not allowlisted under select ports, the IPS engine performs the violation action to block,
allow, or monitor that traffic.
This feature can be used in the following scenarios::
l When one protocol dissector confirms the service of network traffic, protocol enforcement can check whether the
confirmed service is allowlisted under the server port. If it is not allowlisted, the traffic is considered a violation and
IPS can take the action specified in the configuration (block or monitor it).
l When there is no confirmed service for the network traffic, the traffic is considered a service violation if
IPS dissectors rule out all of the services enforced under its server port.
In an applicable profile, a default-network-service list can be created to associate well known ports with accepted
services.
To setup protocol enforcement in the CLI:
config application list
edit "protocol-GUI"
set other-application-log enable
set control-default-network-services {enable | disable} # Enable/Disable enforcement
of protocols over select ports
config default-network-services # Default network service
entries
FortiOS 6.4.2 Administration Guide 1093
Fortinet Inc.
Security Profiles
edit 1
set port 80 # Port number, enter an integer value from <0>
to <65535>
set services http # Network protocols: http, ssh, ftp, dns,
smtp, pop3, imap, snmp, nntp, and https
next
edit 2
set port 53
set services dns
set violation-action {pass | monitor | block} # Pass, Log, or block when
non-DNS traffic run over port 53
next
end
next
end
To setup protocol enforcement in the GUI:
1. Go to Security Profiles > Application Control.
2. Create a new application sensor or edit an existing one.
3. Enable Network Protocol Enforcement.
Enforcement entries can be created, edited, or deleted to configure network services on certain ports and determine
the violation action.
FortiOS 6.4.2 Administration Guide 1094
Fortinet Inc.
Security Profiles
4. Click Create New in the Network Protocol Enforcement table.
5. In the New Default Network Service pane:
a. Enter a Port number.
b. Select Enforced protocols.
c. Choose the Violation action.
d. Click OK.
6. Click OK.
SSL-based application detection over decrypted traffic in a sandwich topology
When a FortiGate is sandwiched between SSL encryption and decryption devices, the FortiGate can process the
decrypted traffic that passes between those devices. This feature adds support for decrypted traffic in application
control. In some pre-defined signatures, the signature is pre-marked with the require_ssl_di tag. The force-
inclusion-ssl-di-sigs option under application list allows users to control the inspection of dissected
traffic. When this option is enabled, the IPS engine forces the pre-marked SSL-based signatures to be applied to the
decrypted traffic of the respective applications. In the following topology, SSL Proxy 1 handles the client connection and
SSL Proxy 2 handles the server connection, leaving the content unencrypted as traffic passes through the FortiGate.
To configure SSL-based application detection over decrypted traffic:
config application list
edit "test"
set force-inclusion-ssl-di-sigs {enable | disable}
FortiOS 6.4.2 Administration Guide 1095
Fortinet Inc.
Security Profiles
next
end
Example pre-marked SSL-based signature:
F-SBID( --vuln_id 15722; --attack_id 42985; --name "Facebook_Chat"; --group im; --protocol tcp; --default_action pass; -
-revision 4446; --app_cat 23; --vendor 3; --technology 1; --behavior 9; --pop 4; --risk 2; --language "Multiple"; --weight 20;
--depend-on 15832; --depend-on 38468; --require_ssl_di "Yes"; --casi 1; --casi 8; --parent 15832; --app_port
"TCP/443"; --severity info; --status hidden; --service http; --flow from_client; --pattern "/pull?"; --context uri; --no_case; --
pattern ".facebook.com"; --context host; --no_case; --tag set,Tag.Facebook.Pull; --tag quiet; --scan-range 10m,all; --date
20190301; )
All signatures that include the require_ssl_di tag are pre-defined and cannot be customized.
Matching multiple parameters on application control signatures
Application control signatures that support parameters (such as SCADA protocols) can have multiple parameters
grouped together and matched at the same time. Multiple application parameter groups can be added to an override.
Traffic will be flagged if it matches at least one parameter group.
This example uses the Modbus_Func05.Write.Single.Coil.Validation signature. This is an industrial signature, so ensure
that no signatures are excluded:
config ips global
set exclude-signatures none
end
To configure an application sensor with multiple parameters in the GUI:
1. Go to Security Profiles > Application Control and click Create New, or edit an existing sensor.
2. In the Application and Filter Overrides table, click Create New.
3. Search for Modbus_Func05.Write.Single.Coil.Validation and press Enter. A gear icon beside the signature name
indicates it has configurable application parameters.
FortiOS 6.4.2 Administration Guide 1096
Fortinet Inc.
Security Profiles
4. In the search results, select Modbus_Func05.Write.Single.Coil.Validation and click Add Selected.
5. Click the Selected tab. In the Application Parameters section, click Create New.
FortiOS 6.4.2 Administration Guide 1097
Fortinet Inc.
Security Profiles
6. Edit the parameter values as needed.
7. Click OK.
8. Add more signatures if needed.
9. Click OK.
To configure an application sensor with multiple parameters in the CLI:
config application list
edit "test"
set other-application-log enable
config entries
edit 1
set application 48885
config parameters
edit 1
config members
edit 1
set name "UnitID"
set value "0:255"
next
edit 2
set name "Address"
set value "0:65535"
next
edit 3
set name "Value"
set value "0,65280"
next
end
next
end
next
edit 2
FortiOS 6.4.2 Administration Guide 1098
Fortinet Inc.
Security Profiles
set category 2 6
next
end
next
end
Intrusion prevention
With the FortiOS intrusion prevention system (IPS), you can detect and block network-based attacks. You can configure
IPS sensors based on IPS signatures, IPS filters, outgoing connections to botnet sites, and rate-based signatures.
FortiOS includes eight preloaded IPS sensors:
l all_default
l all_default_pass
l default
l high_security
l protect_client
l protect_email_server
l protect_http_server
l wifi-default
You can customize these sensors, or you can create your own and apply it to a firewall policy.
This functionality requires a subscription to FortiGuard IPS Service.
The following topic provides information about IPS sensors:
l Botnet C&C IP blocking on page 1099
l Detecting IEC 61850 MMS protocol in IPS on page 1103
l IPS signature filter options on page 1104
Botnet C&C IP blocking
The Botnet C&C section consolidates multiple botnet options in the IPS profile. This allows you to enable botnet blocking
across all traffic that matches the policy by configuring one setting in the GUI, or by the scan-botnet-connections
option in the CLI.
To configure botnet C&C IP blocking using the GUI:
1. Go to Security Profiles > Intrusion Prevention.
2. Edit an existing sensor, or create a new one.
3. Navigate to the Botnet C&C section.
FortiOS 6.4.2 Administration Guide 1099
Fortinet Inc.
Security Profiles
4. For Scan Outgoing Connections to Botnet Sites, click Block or Monitor.
5. Configure other settings as needed.
6. Click Apply. Botnet C&C is now enabled for the sensor.
7. Add this sensor to the firewall policy.
The IPS engine will scan outgoing connections to botnet sites. If you access a botnet IP, an IPS log is generated for
this attack.
8. Go to Log & Report > Intrusion Prevention to view the log.
To configure botnet C&C IP blocking using the CLI:
config ips sensor
edit "Demo"
set scan-botnet-connections <disable | block | monitor>
next
end
The scan-botnet-connections option is no longer available in the following CLI
commands:
l config firewall policy
l config firewall interface-policy
l config firewall proxy-policy
l config firewall sniffer
FortiOS 6.4.2 Administration Guide 1100
Fortinet Inc.
Security Profiles
Botnet IPs and domains lists
To view botnet IPs and domains lists using the GUI:
1. Go to System > FortiGuard. Botnet IPs and Botnet Domains are visible in the Intrusion Prevention section.
2. Click View List for more details.
Botnet C&C domain blocking
To block connections to botnet domains using the GUI:
1. Go to Security Profiles > DNS Filter.
2. Edit an existing filter, or create a new one.
3. Enable Redirect botnet C&C requests to Block Portal.
4. Configure other settings as needed.
5. Click OK.
6. Add this filter profile to a firewall policy.
Botnet C&C URL blocking
To block malicious URLs using the GUI:
1. Go to Security Profiles > Intrusion Prevention.
2. Edit an existing sensor, or create a new one.
FortiOS 6.4.2 Administration Guide 1101
Fortinet Inc.
Security Profiles
3. Enable Block malicious URLs.
4. Configure other settings as needed.
5. Click OK.
6. Add this sensor to a firewall policy.
Botnet C&C signature blocking
To add IPS signatures to a sensor using the GUI:
1. Go to Security Profiles > Intrusion Prevention.
2. Edit an existing sensor, or create a new one.
3. In the IPS Signatures section, click Add Signatues. A list of available signatures appears.
4. Select the signatures you want to include from the list.
5. Click Use Selected Signatures.
6. Configure other settings as needed.
7. Add this sensor to a firewall policy to detect or block attacks that match the IPS signatures.
FortiOS 6.4.2 Administration Guide 1102
Fortinet Inc.
Security Profiles
Detecting IEC 61850 MMS protocol in IPS
IEC 61850 is a SCADA protocol whose services are mapped to a number of protocols, including MMS services.
MMS/ICCP detection is supported in IPS. The purpose of the MMS dissectors is to identify every IEC 61850 service to
distinguish different MMS/ICCP messages. IPS engine 6.0.12 and later support MMS dissectors.
The following scenarios are also supported:
l Multiple MMS PDUs are transferred in one TCP payload, and the IPS engine identifies individuals.
l An MMS message is split over multiple TCP segments, where MMS runs over COTP segments.
l ICCP/TASE.2 that also uses MMS transport (ISO transport over TCP for ICCP) is detected.
Industrial signatures must be enabled in the global IPS settings to receive MMS/ICCP signatures. By default, industrial
signatures are excluded.
config ips global
set exclude-signatures none
end
Below are some industrial signatures for MMS/ICCP messages that can be detected by the IPS engine. This is not an
exhaustive list.
l MMS_GetNameList.Request
l MMS_GetNamedVariableListAttributes.Request
l MMS_GetVariableAccessAttributes.Request
l MMS_Identify.Request
l MMS_Initiate.Request
l MMS_Read.Request
l MMS_Reset.Request
l ICCP_Transfer.Reporting
l ICCP_Create.Dataset
l ICCP_Abort
l ICCP_Start.Transfer.DSTransferSet
l ICCP_Get.Dataset.Element.Values
FortiOS 6.4.2 Administration Guide 1103
Fortinet Inc.
Security Profiles
l ICCP_Get.Next.DSTransfer.Set.Value
l ICCP_Delete.Dataset
l ICCP_Start.Transfer.IMTransferSet
Diagnose command
The COTP dissector adds support for identifying every MMS PDU, and let the IPS engine separate them, like the
Modbus and IEC-104 services for example.
# diagnose ips debug enable all
# diagnose debug enable
[284@78]ips_l7_dsct_processor: serial=8142 create: cotp
[284@78]ips_l7_dsct_processor: serial=8142 create: iec104
[284@78]ips_l7_dsct_processor: serial=8142 create: modbus
Log samples
MMS dissectors can be triggered, and MMS/ICCP signatures can be monitored and logged.
Log samples:
date=2020-03-26 time=15:51:10 logid="1059028704" type="utm" subtype="app-ctrl"
eventtype="signature" level="information" vd="vd1" eventtime=1585263070836106492 tz="-0700"
appid=43699 srcip=10.1.100.242 dstip=172.16.200.106 srcport=50963 dstport=102
srcintf="port13" srcintfrole="undefined" dstintf="port14" dstintfrole="undefined" proto=6
service="tcp/26112" direction="outgoing" policyid=1 sessionid=2711 applist="test"
action="pass" appcat="Industrial" app="MMS_Read.Request" incidentserialno=376610508
msg="Industrial: MMS_Read.Request," apprisk="elevated"
date=2020-03-26 time=16:15:45 logid="1059028704" type="utm" subtype="app-ctrl"
eventtype="signature" level="information" vd="vd1" eventtime=1585091746264983273 tz="-0700"
appid=44684 srcip=10.1.100.242 dstip=172.16.200.106 srcport=41665 dstport=102
srcintf="port13" srcintfrole="undefined" dstintf="port14" dstintfrole="undefined" proto=6
service="tcp/26112" direction="incoming" policyid=1 sessionid=194463 applist="test"
action="pass" appcat="Industrial" app="ICCP_Transfer.Reporting" incidentserialno=762763993
msg="Industrial: ICCP_Transfer.Reporting," apprisk="elevated"
IPS signature filter options
IPS signature filter options include hold-time and CVE pattern.
hold-time
The hold-time option allows you to set the amount of time that signatures are held after a FortiGuard IPS signature
update per VDOM. During the holding period, the signature's mode is monitor. The new signatures are enabled after the
hold-time, to avoid false positives.
The hold-time can be from 0 days and 0 hours (default) up to 7 days, in the format ##d##h.
FortiOS 6.4.2 Administration Guide 1104
Fortinet Inc.
Security Profiles
To configure the amount of time to hold and monitor IPS signatures:
config system ips
set signature-hold-time 3d12h
set override-signature-hold-by-id enable
end
When a signature that is on hold is matched, the log will include the message signature is on hold:
date=2010-07-06 time=00:00:57 logid="0419016384" type="utm" subtype="ips"
eventtype="signature" level="alert" vd="vd1" eventtime=1278399657778481842 tz="-0700"
severity="info" srcip=10.1.100.22 srccountry="Reserved" dstip=172.16.200.55 srcintf="port13"
srcintfrole="undefined" dstintf="port14" dstintfrole="undefined" sessionid=3620
action="detected" proto=6 service="HTTP" policyid=1 attack="Eicar.Virus.Test.File"
srcport=52170 dstport=80 hostname="172.16.200.55" url="/virus/eicar" direction="incoming"
attackid=29844 profile="test" ref="http://www.fortinet.com/ids/VID29844"
incidentserialno=25165825 msg="file_transfer: Eicar.Virus.Test.File, (signature is on hold)"
To view signatures being held by rule ID 29844 on the vd1 VDOM:
# diagnose ips signature on-hold vd1 29844
Rule: 29844, attack_id: 58886, last updated: 20170411
Rule: 29844, attack_id: 59517, last updated: 20170411
Rule: 29844, attack_id: 60105, last updated: 20170411
To view all help signatures on the vd1 VDOM:
# diagnose ips signature on-hold vd1
Rule: 17541, attack_id: 20899, last updated: 20140423
Rule: 17557, attack_id: 20934, last updated: 20140423
Rule: 17559, attack_id: 20932, last updated: 20140423
Rule: 17560, attack_id: 20933, last updated: 20140423
Rule: 17562, attack_id: 20928, last updated: 20170908
Rule: 17677, attack_id: 21187, last updated: 20171106
Rule: 17713, attack_id: 43756, last updated: 20140424
Rule: 17759, attack_id: 21298, last updated: 20140423
...
CVE pattern
The CVE pattern option allows you to filter IPS signatures based on CVE IDs or with a CVE wildcard, ensuring that any
signatures tagged with that CVE are automatically included.
To configure CVE patterns for CVE-2010-0177 and all CVE-2017 CVEs:
config ips sensor
edit "cve"
set comment "cve"
config entries
edit 1
set cve "cve-2010-0177"
set status enable
set log-packet enable
set action block
next
FortiOS 6.4.2 Administration Guide 1105
Fortinet Inc.
Security Profiles
edit 2
set cve "cve-2017"
set action reset
next
end
next
end
For example, the CVE of the IPS signature Mozilla.Firefox.PluginArray.NsMimeType.Code.Execution is CVE-2010-
0177. This matches the CVE filter in the IPS sensor, so traffic is blocked and logged:
date=2020-07-13 time=15:44:56 logid="0419016384" type="utm" subtype="ips"
eventtype="signature" level="alert" vd="vd1" eventtime=1594593896666145871 tz="-0700"
severity="critical" srcip=10.1.100.22 srccountry="Reserved" dstip=172.16.200.55
srcintf="port2" srcintfrole="undefined" dstintf="port1" dstintfrole="undefined"
sessionid=1638 action="dropped" proto=6 service="HTTPS" policyid=1
attack="Mozilla.Firefox.PluginArray.NsMimeType.Code.Execution" srcport=58298 dstport=443
hostname="172.16.200.55" url="/Mozilla" direction="incoming" attackid=20853 profile="sensor-
1" ref="http://www.fortinet.com/ids/VID20853" incidentserialno=124780667 msg="web_client:
Mozilla.Firefox.PluginArray.NsMimeType.Code.Execution," crscore=50 craction=4096
crlevel="critical"
File filter
The file filter can be applied directly to firewall policies and supports various traffic protocols in proxy or flow mode.
Protocol Proxy mode Flow mode
CIFS Yes Yes
FTP Yes Yes
HTTP Yes Yes
IMAP Yes Yes
MAPI Yes No
POP3 Yes Yes
SMTP Yes Yes
SSH Yes No
Prior to FortiOS 6.4.1, file filter was embedded in the web filter, email filter, SSH inspection, and CIFS profiles.
To configure a file filter in the GUI:
1. Configure the filter profile:
a. Go to Security Profiles > File Filter and click Create New.
b. Select a Feature set.
c. In the Rules table, click Create New.
FortiOS 6.4.2 Administration Guide 1106
Fortinet Inc.
Security Profiles
d. Configure the settings as required.
e. Click OK to save the rule.
f. Optionally, create more rules.
g. Click OK to save the filter profile.
2. Apply the filter to a policy:
a. Go to Policy & Objects > Firewall Policy and edit an existing policy or create a new one.
b. In the Security Profiles section, enable File Filter.
c. Select the filter from the dropdown box.
d. Configure the other settings as needed.
e. Click OK.
FortiOS 6.4.2 Administration Guide 1107
Fortinet Inc.
Security Profiles
To configure a file filter in the CLI:
1. Configure the file filter profile:
config file-filter profile
edit "test"
set comment ''
set feature-set flow
set replacemsg-group ''
set log enable
set scan-archive-contents enable
config rules
edit "r2"
set comment ''
set protocol http ftp smtp imap pop3 cifs
set action block
set direction outgoing
set password-protected any
set file-type "sis" "tar" "tiff" "torrent" "upx" "uue" "wav" "wma" "xar"
"xz" "zip"
next
edit "r1"
set comment ''
set protocol http ftp smtp imap pop3 cifs
set action log-only
set direction any
set password-protected any
set file-type ".net" "7z" "activemime" "arj" "aspack" "avi" "base64"
"bat" "binhex" "bmp" "bzip" "bzip2"
next
edit "r3"
set comment ''
set protocol http ftp smtp imap pop3
set action block
set direction any
set password-protected any
set file-type "binhex"
next
end
next
end
2. Apply the filter to a policy:
config firewall policy
edit 1
set name "filefilter-policy"
set srcintf "port10"
set dstintf "port9"
set srcaddr "all"
set dstaddr "all"
set srcaddr6 "all"
set dstaddr6 "all"
set action accept
set schedule "always"
set service "ALL"
set utm-status enable
FortiOS 6.4.2 Administration Guide 1108
Fortinet Inc.
Security Profiles
set profile-protocol-options "protocol"
set ssl-ssh-profile "protocols"
set file-filter-profile "test"
set auto-asic-offload disable
set np-acceleration disable
set nat enable
next
end
Logs
Go to Log & Report > File Filter to view the file filter logs.
Log samples
date=2020-04-21 time=17:04:02 logid="1900064000" type="utm" subtype="file-filter"
eventtype="file-filter" level="warning" vd="root" eventtime=1587513843211612684 tz="-0700"
policyid=1 sessionid=1751 srcip=10.1.100.22 srcport=57382 srcintf="port21"
srcintfrole="undefined" dstip=172.16.200.44 dstport=445 dstintf="port23"
dstintfrole="undefined" proto=6 service="CIFS" profile="filefilter" direction="incoming"
action="blocked" filtername="1" filename="sample\\putty.exe" filesize=454656 filetype="exe"
msg="File was blocked by file filter."
date=2020-04-21 time=17:03:54 logid="1900064000" type="utm" subtype="file-filter"
eventtype="file-filter" level="warning" vd="root" eventtime=1587513834376811325 tz="-0700"
policyid=1 sessionid=1742 srcip=10.1.100.22 srcport=36754 srcintf="port21"
srcintfrole="undefined" dstip=172.16.200.44 dstport=22 dstintf="port23"
dstintfrole="undefined" proto=6 service="SSH" subservice="SCP" profile="filefilter"
direction="incoming" action="blocked" filtername="1" filename="test.pdf" filesize=571051
filetype="pdf" msg="File was blocked by file filter."
date=2020-04-21 time=17:00:30 logid="1900064000" type="utm" subtype="file-filter"
eventtype="file-filter" level="warning" vd="root" eventtime=1587513630482716465 tz="-0700"
policyid=1 sessionid=1684 srcip=10.1.100.22 srcport=58524 srcintf="port21"
srcintfrole="undefined" dstip=172.16.200.44 dstport=143 dstintf="port23"
dstintfrole="undefined" proto=6 service="IMAP" profile="filefilter" direction="incoming"
action="blocked" from="[email protected]" to="[email protected]"
recipient="pc4user2" subject="QA Test" filtername="1" filename="test.JPG" filesize=48079
filetype="jpeg" msg="File was blocked by file filter."
date=2020-04-21 time=16:59:58 logid="1900064000" type="utm" subtype="file-filter"
eventtype="file-filter" level="warning" vd="root" eventtime=1587513598866551739 tz="-0700"
policyid=1 sessionid=1674 srcip=10.1.100.22 srcport=39854 srcintf="port21"
srcintfrole="undefined" dstip=172.16.200.44 dstport=110 dstintf="port23"
dstintfrole="undefined" proto=6 service="POP3" profile="filefilter" direction="incoming"
action="blocked" from="[email protected]" to="[email protected]"
recipient="pc4user2" subject="QA Test" filtername="1" filename="test.JPG" filesize=48079
filetype="jpeg" msg="File was blocked by file filter."
date=2020-04-21 time=16:58:31 logid="1900064000" type="utm" subtype="file-filter"
eventtype="file-filter" level="warning" vd="root" eventtime=1587513511516745955 tz="-0700"
policyid=1 sessionid=1619 srcip=10.1.100.22 srcport=53144 srcintf="port21"
srcintfrole="undefined" dstip=172.16.200.44 dstport=25 dstintf="port23"
dstintfrole="undefined" proto=6 service="SMTP" profile="filefilter" direction="outgoing"
action="blocked" from="[email protected]" to="[email protected]"
FortiOS 6.4.2 Administration Guide 1109
Fortinet Inc.
Security Profiles
sender="[email protected]" recipient="[email protected]" subject="QA Test"
filtername="1" filename="test.PNG" filesize=65173 filetype="png" msg="File was blocked by
file filter."
date=2020-04-21 time=16:58:14 logid="1900064000" type="utm" subtype="file-filter"
eventtype="file-filter" level="warning" vd="root" eventtime=1587513494608988795 tz="-0700"
policyid=1 sessionid=1605 srcip=10.1.100.22 srcport=43186 srcintf="port21"
srcintfrole="undefined" dstip=172.16.200.44 dstport=21 dstintf="port23"
dstintfrole="undefined" proto=6 service="FTP" profile="filefilter" direction="incoming"
action="blocked" filtername="1" filename="index.html" filesize=21 filetype="html" msg="File
was blocked by file filter."
Supported file types
File filter allows the FortiGate to block files passing through based on file type based on the file's meta data only, and not
on file size or file content. A DLP sensor must be configured to block files based on size or content, such as SSN
numbers, credit card numbers, or regexp.
The following file types are supported in file filter and DLP profiles:
Type Description
.net Match .NET files
7z Match 7-Zip files
activemime Match ActiveMime files
arj Match ARJ compressed files
aspack Match ASPack files
avi Match AVI files
base64 Match Base64 files
bat Match Windows batch files
binhex Match BinHex files
bmp Match BMP files
bzip Match Bzip files
bzip2 Match Bzip2 files
cab Match Windows CAB files
chm Match Windows compiled HTML help files
class Match CLASS files
cod Match COD files
crx Match Chrome extension files
dmg Match Apple disk image files
elf Match ELF files
FortiOS 6.4.2 Administration Guide 1110
Fortinet Inc.
Security Profiles
Type Description
exe Match Windows executable files
flac Match FLAC files
fsg Match FSG files
gif Match GIF files
gzip Match Gzip files
hlp Match Windows help files
hta Match HTA files
html Match HTML files
iso Match ISO archive files
jad Match JAD files
javascript Match JavaScript files
jpeg Match JPEG files
lzh Match LZH compressed files
mach-o Match Mach object files
mime Match MIME files
mov Match MOV files
mp3 Match MP3 files
mpeg Match MPEG files
msc Match MSC files
msi Match Windows Installer MSI Bzip files
msoffice Match MS-Office files. For example, DOC, XLS, PPT, and so on.
msofficex Match MS-Office XML files. For example, DOCX, XLSX, PPTX, and so on.
pdf Match PDF files
petite Match Petite files
png Match PNG files
rar Match RAR archives
rm Match RM files
sis Match SIS files
tar Match TAR files
tiff Match TIFF files
FortiOS 6.4.2 Administration Guide 1111
Fortinet Inc.
Security Profiles
Type Description
torrent Match torrent files
unknown* Match unknown files
upx Match UPX files
uue Match UUE files
wav Match WAV files
wma Match WMA files
xar Match XAR archive files
xz Match XZ files
zip Match ZIP files
*
This file type is only available in DLP profiles.
Email filter
Email filters can be configured to perform spam detection and filtering. You can customize the default profile, or create
your own and apply it to a firewall policy.
Two kinds of filtering can be defined in a single profile, and they will act independent of one
another.
Filter options can be organized according to the source of the decision:
l Local options: the FortiGate qualifies the email based on local conditions, such as block/allowlists, banned words, or
DNS checks using FortiGuard Antispam.
l FortiGuard-based options: the FortiGate qualifies the email based on the score or verdict returned from FortiGuard
Antispam.
l Third-party options: the FortiGate qualifies the email based on information from a third-party source (like an ORB
list).
Local and FortiGuard block/allowlists can be enabled and combined in a single profile. When combined, the local
block/allowlist has a higher priority than the FortiGuard block list during a decision making process. For example, if a
client IP address is blocklisted in the FortiGuard server, but you want to override this decision and allow the IP to pass
through the filter, you can define the IP address or subnet in a local block/allowlist with the clear action. Because the
information coming from the local list has a higher priority than the FortiGuard service, the email will be considered clean.
Some features of this functionality require a subscription to FortiGuard Antispam.
FortiOS 6.4.2 Administration Guide 1112
Fortinet Inc.
Security Profiles
Protocol comparison between Email filter inspection modes
The following table indicates which Email filters are supported by their designated inspection modes.
SMTP POP3 IMAP MAPI
Proxy Yes Yes Yes Yes
Flow Yes Yes Yes No
The following topics provide information about email filter profiles:
l Local-based filters on page 1113
l FortiGuard-based filters on page 1116
l Protocols and actions on page 1117
l Configuring webmail filtering on page 1118
Local-based filters
You can make block/allowlists from emails or IP subnets to forbid or allow them to send or receive emails.
You can also define a list of banned words. Emails that contain any of these banned words are considered spam.
With the spamhelodns and spamraddrdns commands, the FortiGate performs a standard DNS check on the machine
name used in the HELO SMTP message, and/or the return-to field to determine if these names belong to a registered
domain. The FortiGate does not check the FortiGuard service during these operations.
To configure a local-based email filter in the CLI:
1. Configure a BWL:
config emailfilter bwl
edit 1
set name "mtBWL"
config entries
edit 1
set status enable
set type ip
set action spam
set addr-type ipv4
set ip4-subnet 10.1.100.0 255.255.255.0
next
end
next
end
2. Configure an email filter profile:
config emailfilter profile
edit "myLocalEmailFilter"
set spam-filtering enable
set options spambwl spamhelodns spamraddrdns
config smtp
set action tag
FortiOS 6.4.2 Administration Guide 1113
Fortinet Inc.
Security Profiles
end
set spam-bwl-table 1
next
end
3. Use the profile in a firewall policy:
config firewall policy
edit 1
.....
set inspection-mode proxy
set emailfilter-profile "myLocalEmailFilter"
next
end
To configure a local-based email filter in the GUI:
1. Go to Security Profiles > Email Filter.
2. Click Create New or select an existing profile and click Edit.
3. In the firewall policy, create or edit a rule.
4. Set the inspection-mode to Proxy-based.
FortiOS 6.4.2 Administration Guide 1114
Fortinet Inc.
Security Profiles
5. Enable the Email Filter option and select the previously created profile.
6. Set SSL Inspection to a profile that has deep SSL inspection enabled.
Deep inspection is required if you intend to filter SMTP, POP3, IMAP, or any SSL/TLS encapsulated protocol. The
following SSL-inspection profile has deep inspection enabled:
7. Click OK.
FortiOS 6.4.2 Administration Guide 1115
Fortinet Inc.
Security Profiles
To configure banned words in the CLI:
1. Configure a banned words list:
config emailfilter bword
edit 1
set name "banned"
config entries
edit 1
set pattern "undesired_word"
next
end
next
end
2. Configure an email filter profile:
config emailfilter profile
edit "myBannedWordsProfile"
set spam-filtering enable
set options bannedword
set spam-bword-table 1
next
end
3. Use the profile in a firewall policy:
config firewall policy
edit 1
.....
set inspection-mode proxy
set emailfilter-profile "myBannedWordsProfile"
next
end
Once created, this profile should be set in the firewall policy.
Banned words can only be configured in the CLI.
FortiGuard-based filters
The FortiGate consults FortiGuard servers to help identify spammer IP address or emails, known phishing URLs, known
spam URLs, known spam email checksums, and others.
FortiGuard servers have maintained databases that contain blocklists, which are fed from Fortinet sensors and labs
distributed all over the world.
To configure the FortiGuard filters in the CLI:
config emailfilter profile
edit "myEmailFilterProfile"
set spam-filtering enable
set options spamfsip spamfssubmit spamfschksum spamfsurl spamrbl spamhdrcheck
FortiOS 6.4.2 Administration Guide 1116
Fortinet Inc.
Security Profiles
spamfsphish
next
end
To configure the FortiGuard filters in the GUI:
1. Go to Security Profiles > Email Filter.
2. In the FortiGuard Spam Filtering Spam Filtering section, you can enable or disable the following filters:
l IP Address Check
l URL Check
l Detect Phising URLs in Email
l Email Checksum Check
l Spam Submission
3. Click OK.
Protocols and actions
In an email filtering profile, there are sections for SMTP, POP3, and IMAP protocols. In each section, you can set an
action to either discard, tag, or pass the log for that protocol.
Protocol Available action
SMTP Pass: Allow spam email to pass through.
Tag: Tag spam email with configured text in the subject or header.
Discard: Discards (blocks) spam email.
POP3 & IMAP Pass: Allow spam email to pass through.
Tag: Tag spam email with configured text in the subject or header.
MAPI: Pass: Allow spam email to pass through.
Discard: Discards (blocks) spam email.
For example, to tag spam SMTP email, use the following commands:
config emailfilter profile
edit "smtpFilter"
set spam-filtering enable
set options <options>
...
config smtp
set log enable
set action tag
end
next
end
MAPI email filtering
MAPI is a proprietary protocol from Microsoft. It uses HTTPS to encapsulate email requests and responses between
Microsoft Outlook clients and Microsoft Exchange servers. The configuration of MAPI email filters are only possible
FortiOS 6.4.2 Administration Guide 1117
Fortinet Inc.
Security Profiles
through the CLI.
To configure the MAPI email filter in the CLI:
config emailfilter profile
edit "myMapiFilter"
set spam-filtering enable
set options spamfsip spamfssubmit spamfsurl spamfsphish
config mapi
set log enable
set action "discard or pass"
end
next
end
Configuring webmail filtering
You can configure an email filter to detect and log emails sent via Gmail and Hotmail. These interfaces do not use
standard email protocols (SMTP, POP3, or IMAP) and instead use HTTPS. However, you can still configure the email
filter to detect emails that pass through the FortiGate.
The FortiGate only detects and logs the emails, it does not discard or tag them.
To configure webmail filtering in the CLI:
config emailfilter profile
edit "myWebMailDetector"
set spam-filtering enable
config msn-hotmail
set log enable
end
config gmail
set log enable
end
next
end
Data leak prevention
The FortiGate data leak prevention (DLP) system prevents sensitive data from leaving or entering your network. You can
customize the default sensor or create your own by adding individual filters based on file type, file size, a regular
expression, an advanced rule, or a compound rule. Once configured, you can apply the DLP sensor to a firewall policy.
Data matching defined sensitive data patterns is blocked, logged, or allowed when it passes through the FortiGate.
DLP can only be configured in the CLI.
FortiOS 6.4.2 Administration Guide 1118
Fortinet Inc.
Security Profiles
The filters in a DLP sensor can examine traffic for the following:
l Known files using DLP fingerprinting
l Known files using DLP watermarking
l Particular file types
l Particular file names
l Files larger than a specified size
l Data matching a specified regular expression
l Credit card and social security numbers
Filters are ordered, but there is no precedence between the possible actions
DLP is primarily used to stop sensitive data from leaving your network. DLP can also be used to prevent unwanted data
from entering your network and to archive some or all of the content that passes through the FortiGate. DLP archiving is
configured per filter, which allows a single sensor to archive only the required data. You can configure the DLP archiving
protocol in the CLI (see Configure DLP sensors).
There are two forms of DLP archiving:
l Summary only: a summary of all the activity detected by the sensor is recorded. For example, when an email
message is detected, the sender, recipient, message subject, and total size are recorded. When a user accesses
the web, every URL that they visit is recorded.
l Full: detailed records of all the activity detected by the sensor is recorded. For example, when an email message is
detected, the message itself, including any attachments, is recorded. When a user accesses the web, every page
that they visit is archived.
FortiOS 6.4.2 Administration Guide 1119
Fortinet Inc.
Security Profiles
Protocol comparison between DLP inspection modes
The following table indicates which protocols can be inspected by DLP based on the specified inspection modes.
HTTP FTP IMAP POP3 SMTP NNTP MAPI CIFS SFTP/SCP
Proxy Yes Yes Yes Yes Yes Yes Yes No Yes
Flow Yes Yes Yes Yes Yes No No Yes No
The following topics provide information about DLP:
l Basic DLP filter types on page 1120
l DLP fingerprinting on page 1122
l DLP watermarking on page 1126
Basic DLP filter types
Basic filter types can be configured in the CLI and include:
l File type and name
l File size
l Regular expression
l Credit card and SSN
File type and name
A file type filter allows you to block, allow, log, or quarantine based on the file type specified in the file filter list (see
Supported file types on page 1110).
To configure file type and name filtering:
1. Create a file pattern to filter files based on the file name patter or file type:
config dlp filepattern
edit <filepatern_entry_integer>
set name <string>
config entries
edit <file pattern>
set filter-type <type | pattern>
set file-type <file type>
next
end
next
end
For example, to filter for GIFs and PDFs:
config dlp filepattern
edit 11
set name “sample_config”
config entries
FortiOS 6.4.2 Administration Guide 1120
Fortinet Inc.
Security Profiles
edit "*.gif"
set filter-type pattern
next
edit "pdf"
set filter-type type
set file-type pdf
next
end
next
end
2. Attach the file pattern to a DLP sensor, and specify the protocols and actions:
config dlp sensor
edit <string>
config filter
edit <integer>
set name <string>
set proto <smtp | pop3 | imap | http-get | http-post | ftp | nntp |
mapi>
set filter-by file-type
set file-type 11 <-- Previously configured filepattern
set action <allow | log-only| block | quarantine-ip>
next
end
next
end
File size
A file size filter checks for files that exceed the specific size, and performs the DLP sensor's configured action on them.
To configure file size filtering:
config dlp sensor
edit <string>
config filter
edit <integer>
set name <string>
set proto <smtp | pop3 | imap | http-get | http-post | ftp | nntp | mapi>
set filter-by file-size <-- Match any file over with a size over the
threshold
set file-type 11 <-- Previously configured filepattern
set action <allow | log-only| block | quarantine-ip>
next
end
next
end
Regular expression
A regular expression filter is used to filter files or messages based on the configured regular expression pattern.
FortiOS 6.4.2 Administration Guide 1121
Fortinet Inc.
Security Profiles
To configure regular expression filtering:
config dlp sensor
edit <string>
config filter
edit <integer>
set name <string>
set type <file | message> <-- Check contents of a file or of messages, web
pages, etc.
set proto <smtp | pop3 | imap | http-get | http-post | ftp | nntp | mapi>
set filter-by regexp <-- Use a regular expression to match content
set regexp <regexp> <-- Input a regular expression pattern
set action <allow | log-only| block | quarantine-ip>
next
end
next
end
Credit card and SSN
The credit card sensor can match the credit card number formats used by American Express, Mastercard, and Visa. It
can be used to filter files or messages.
The SSN sensor can be used to filter files or messages for Social Security Numbers.
To configure credit card or SSN filtering:
config dlp sensor
edit <string>
config filter
edit <integer>
set name <string>
set type <file | message> <-- Check contents of a file, or of messages, web
pages, etc.
set proto <smtp | pop3 | imap | http-get | http-post | ftp | nntp | mapi>
set filter-by < credit-card | ssn > <-- Match credit cards or social security
numbers
set action <allow | log-only| block | quarantine-ip>
next
end
next
end
DLP fingerprinting
DLP fingerprinting can be used to detect sensitive data. The file that the DLP sensor will filter for is uploaded and the
FortiGate generates and stores a checksum fingerprint. The FortiGate unit generates a fingerprint for all of the files that
are detected in network traffic, and compares all of the checksums stored in its database. If a match is found, the
configured action is taken.
Any type of file can be detected by DLP fingerprinting, and fingerprints can be saved for each revision of a file as it is
updated.
To use fingerprinting:
FortiOS 6.4.2 Administration Guide 1122
Fortinet Inc.
Security Profiles
l Select the files to be fingerprinted by targeting a document source.
l Add fingerprinting filters to DLP sensors.
l Add the sensors to firewall policies that accept traffic that the fingerprinting will be applied on.
The document fingerprint feature requires a FortiGate device that has internal storage.
To configure a DLP fingerprint document:
config dlp fp-doc-source
edit <name_str>
set server-type smb
set server <string>
set period {none | daily | weekly | monthly}
set vdom {mgmt | current}
set scan-subdirectories {enable | disable}
set remove-deleted {enable | disable}
set keep-modified {enable | disable}
set username <string>
set password <password>
set file-path <string>
set file-pattern <string>
set sensitivity <Critical | Private | Warning>
set tod-hour <integer>
set tod-min <integer>
set weekday {sunday | monday | tuesday | wednesday | thursday | friday |
saturday}
set date <integer>
next
end
Command Description
server-type smb The protocol used to communicate with document server. Only
Samba (SMB) servers are supported.
server <string> IPv4 or IPv6 address of the server.
period {none | daily | weekly | monthly} The frequency that the FortiGate checks the server for new or
changed files.
vdom {mgmt | current} The VDOM that can communicate with the file server.
scan-subdirectories {enable | disable} Enable/disable scanning subdirectories to find files.
remove-deleted {enable | disable} Enable/disable keeping the fingerprint database up to date when a file
is deleted from the server.
keep-modified {enable | disable} Enable/disable keeping the old fingerprint and adding a new one
when a file is changed on the server.
username <string> The user name required to log into the file server.
FortiOS 6.4.2 Administration Guide 1123
Fortinet Inc.
Security Profiles
Command Description
password <password> The password required to log into the file server.
file-path <string> The path on the server to the fingerprint files.
file-pattern <string> Files matching this pattern on the server are fingerprinted.
sensitivity <Critical | Private | Warning> The sensitivity or threat level for matches with this fingerprint
database.
tod-hour <integer> Set the hour of the day. This option is only available when period is
not none.
tod-min <integer> Set the minute of the hour. This option is only available when period
is not none.
weekday {sunday | monday | tuesday | Set the day of the week. This option is only available when period is
wednesday | thursday | friday | saturday} weekly.
date <integer> Set the day of the month. This option is only available when period
is monthly.
To configure a DLP fingerprint sensor:
config dlp sensor
edit <sensor name>
config filter
edit <id number of filter>
set proto {smtp | pop3 | imap http-get | http-post | ftp | nntp | mapi}
set filter-by fingerprint
set sensitivity {Critical | Private | Warning}
set match-percentage <integer>
set action {allow | log-only | block | ban | quarantine-ip}
next
end
next
end
Command Description
proto {smtp | pop3 | imap http-get | http-post | The protocol to inspect.
ftp | nntp | mapi}
filter-by fingerprint Match against a fingerprint sensitivity.
sensitivity {Critical | Private | Warning} Select a DLP file pattern sensitivity to match.
match-percentage <integer> The percentage of the checksum required to match before the sensor
is triggered.
action {allow | log-only | block | ban | The action to take with content that this DLP sensor matches.
quarantine-ip}
FortiOS 6.4.2 Administration Guide 1124
Fortinet Inc.
Security Profiles
View the DLP fingerprint database on the FortiGate
The CLI debug command diagnose test application dlpfingerprint can be used to display the fingerprint
information that is on the FortiGate.
Fingerprint Daemon Test Usage;
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
1 : This menu
2 : Dump database
3 : Dump all files
5 : Dump all chunk
6 : Refresh all doc sources in all VDOMs
7 : Show the db file size and the limit
9 : Display stats
10 : Clear stats
99 : Restart this daemon
For example, option 3 will dump all fingerprinted files:
DLP_WANOPT-CLT (global) # diagnose test application dlpfingerprint 3
DLPFP diag_test_handler called
File DB:
---------------------------------------
id, filename, vdom, archive, deleted, scanTime, docSourceSrvr,
sensitivity, chunkCnt, reviseCnt,
1, /fingerprint/upload/1.txt, vdom1, 0, 0, 1494868196, 1, 2,
1, 0,
2, /fingerprint/upload/30percentage.xls, vdom1, 0, 0, 1356118250, 1, 2,
13, 0,
3, /fingerprint/upload/50.pdf, vdom1, 0, 0, 1356118250, 1, 2,
122, 0,
4, /fingerprint/upload/50.pdf.tar.gz, vdom1, 0, 0, 1356118250, 1, 2,
114, 0,
5, /fingerprint/upload/check-list_AL-SIP_HA.xls, vdom1, 0, 0, 1356118251, 1,
2, 32, 0,
6, /fingerprint/upload/clean.zip, vdom1, 0, 0, 1356118251, 1, 2,
1, 0,
7, /fingerprint/upload/compare.doc, vdom1, 0, 0, 1522097410, 1, 2,
18, 0,
8, /fingerprint/upload/dlpsensor-watermark.pdf, vdom1, 0, 0, 1356118250, 1,
2, 11, 0,
9, /fingerprint/upload/eicar.com, vdom1, 0, 0, 1356118250, 1, 2,
1, 0,
10, /fingerprint/upload/eicar.zip, vdom1, 0, 0, 1356118250, 1, 2,
1, 0,
11, /fingerprint/upload/EMAIL-CONTENT-ARCHIVE.ppt, vdom1, 0, 0, 1356118250, 1,
2, 11, 0,
12, /fingerprint/upload/encrypt.zip, vdom1, 0, 0, 1356118250, 1, 2,
77, 0,
13, /fingerprint/upload/extension_7_8_1.crx, vdom1, 0, 0, 1528751781, 1,
2, 2720, 0,
14, /fingerprint/upload/fingerprint.txt, vdom1, 0, 0, 1498582679, 1, 2,
37, 0,
15, /fingerprint/upload/fingerprint90.txt, vdom1, 0, 0, 1498582679, 1, 2,
37, 0,
16, /fingerprint/upload/fo2.pdf, vdom1, 0, 0, 1450488049, 1, 2,
1, 0,
17, /fingerprint/upload/foo.doc, vdom1, 0, 0, 1388538131, 1, 2,
9, 0,
18, /fingerprint/upload/fortiauto.pdf, vdom1, 0, 0, 1356118251, 1, 2,
FortiOS 6.4.2 Administration Guide 1125
Fortinet Inc.
Security Profiles
146, 0,
19, /fingerprint/upload/image.out, vdom1, 0, 0, 1531802940, 1, 2,
5410, 0,
20, /fingerprint/upload/jon_file.txt, vdom1, 0, 0, 1536596091, 1, 2, 1,
0,
21, /fingerprint/upload/machotest, vdom1, 0, 0, 1528751955, 1, 2,
19, 0,
22, /fingerprint/upload/nntp-server.doc, vdom1, 0, 0, 1356118250, 1, 2,
17, 0,
23, /fingerprint/upload/notepad++.exe, vdom1, 0, 0, 1456090734, 1, 2,
1061, 0,
24, /fingerprint/upload/nppIExplorerShell.exe, vdom1, 0, 0, 1438559930, 1,
2, 5, 0,
25, /fingerprint/upload/NppShell_06.dll, vdom1, 0, 0, 1456090736, 1, 2,
111, 0,
26, /fingerprint/upload/PowerCollections.chm, vdom1, 0, 0, 1533336889, 1,
2, 728, 0,
27, /fingerprint/upload/reflector.dmg, vdom1, 0, 0, 1533336857, 1, 2,
21117, 0,
28, /fingerprint/upload/roxio.iso, vdom1, 0, 0, 1517531765, 1, 2,
49251,0,
29, /fingerprint/upload/SciLexer.dll, vdom1, 0, 0, 1456090736, 1, 2,
541, 0,
30, /fingerprint/upload/screen.jpg, vdom1, 0, 0, 1356118250, 1, 2,
55, 0,
31, /fingerprint/upload/Spec to integrate FASE into FortiOS.doc, vdom1, 0, 0,
1356118251, 1, 2, 31, 0,
32, /fingerprint/upload/subdirectory1/subdirectory2/subdirectory3/hibun.aea, vdom1, 0,
0, 1529019743, 1, 2, 1, 0,
33, /fingerprint/upload/test.pdf, vdom1, 0, 0, 1356118250, 1, 2,
5, 0,
34, /fingerprint/upload/test.tar, vdom1, 0, 0, 1356118251, 1, 2,
3, 0,
35, /fingerprint/upload/test.tar.gz, vdom1, 0, 0, 1356118250, 1, 2, 1,
0,
36, /fingerprint/upload/test1.txt, vdom1, 0, 0, 1540317547, 1, 2,
1, 0,
37, /fingerprint/upload/thousand-files.zip, vdom1, 0, 0, 1536611774, 1, 2,
241, 0,
38, /fingerprint/upload/Thumbs.db, vdom1, 0, 0, 1445878135, 1, 2,
3, 0,
39, /fingerprint/upload/widget.pdf, vdom1, 0, 0, 1356118251, 1, 2,
18, 0,
40, /fingerprint/upload/xx00-xx01.tar, vdom1, 0, 0, 1356118250, 1, 2, 5,
0,
41, /fingerprint/upload/xx02-xx03.tar.gz, vdom1, 0, 0, 1356118251, 1, 2, 1,
0,
DLP watermarking
Watermarking marks files with a digital pattern to designate them as proprietary to a specific company. A small pattern is
added to the file that is recognized by the DLP watermark filter, but is invisible to the end user (except for text files).
FortiExplorer client, or a Linux-based command line tool, can be used to add a watermark to the following file types:
l .txt
l .doc and .docx
l .pdf
FortiOS 6.4.2 Administration Guide 1126
Fortinet Inc.
Security Profiles
l .ppt and .pptx
l .xls and .xlsx
The following information is covered in this section:
l Watermarking a file with FortiExplorer.
l Watermarking a file with the Linux tool.
l Configuring a DLP sensor to detect watermarked files.
FortiExplorer
In this example, a watermark will be added to small text file. The content of the file is:
This is to show how DLP watermarking is done using FortiExplorer.
FortiExplorer can also be used to watermark an entire directory.
To watermark the text file with FortiExplorer:
1. Open the FortiExplorer client.
2. Select DLP Watermark from the left side bar.
3. Set Apply Watermark To to Select File.
4. Browse for the file, copy the file's path into the Select File field.
5. Set the Sensitivity Level. The available options are: Critical, Private, and Warning.
6. Enter a company identifier in the Identifier field.
7. Select the Output Directory where the watermarked file will be saved.
FortiOS 6.4.2 Administration Guide 1127
Fortinet Inc.
Security Profiles
8. Click Apply Watermark. The file is watermarked.
9. The watermarked file content is changed to:
This is to show how DLP watermarking is done using FortiExplorer.=-=-=-=-=-=-=-=-=-=-
=-=-=-=-=-=-=-=-=identifier=FortiDemo sensitivity=Critical=-=-=-=-=-=-=-=-=-=-=-
=-=-=-=-=-=-=-=
The watermark pattern is visible in text files. For all other supported file types, it is invisible.
Linux-based command line tool
A Linux-based command line tool can be used to watermark files. The tool can be executed is a Linux environment by
passing in files or directories of files.
To download the tool:
1. Log in to Fortinet Service and Support. A valid support contract is required.
2. Go to Download > Firmware Images.
3. Select the Download tab, and go to FortiGate/v5.00/5.0/5.0.0/WATERMARK.
FortiOS 6.4.2 Administration Guide 1128
Fortinet Inc.
Security Profiles
4. Download the fortinet-watermark-linux.out file.
To run the tool:
Enter the following to run the tool on a file:
watermark_linux_amd64 <options> -f <file name> -i <identifier> -l <sensitivity level>
Enter the following to run the tool on a directory:
watermark_linux_amd64 <options> -d <directory> -i <identifier> -l <sensitivity level>
The following options are available:
-h Print this help.
-I Watermark the file in place (don't make a copy of the file).
-o The output file or directory.
-e Encode <to non-readable>.
-i Add a watermark identifier.
-l Add a watermark sensitivity level.
-D Delete a watermark identifier.
-L Delete a watermark sensitivity level.
DLP watermark sensor
A DLP watermark sensor must be configured to detect watermarked files.
To configure a DLP watermark sensor:
config dlp sensor
edit <sensor name>
config filter
edit <id number of filter>
set proto {smtp | pop3 | imap http-get | http-post | ftp | nntp | mapi} <--
Protocol to inspect
set filter-by watermark
set sensitivity {Critical | Private | Warning}
set company-identifier <string>
set action {allow | log-only | block | ban | quarantine-ip}
next
end
next
end
FortiOS 6.4.2 Administration Guide 1129
Fortinet Inc.
Security Profiles
VoIP solutions
You can configure VoIP profiles to allow SIP and SCCP traffic and to protect your network from SIP- and SCCP-based
attacks.
FortiOS includes two preloaded VoIP profiles:
l default
l strict
You can customize these profiles, or you can create your own and add them to firewall policies that allow VoIP.
VoIP profiles cannot be used NGFW policy-based mode. See Profile-based NGFW vs policy-
based NGFW on page 836 for more information.
The following topics provide information about VoIP profiles:
l General use cases on page 1130
l SIP message inspection and filtering on page 1134
l SIP pinholes on page 1136
l SIP over TLS on page 1137
l Custom SIP RTP port range support on page 1138
l Voice VLAN auto-assignment on page 1140
General use cases
There are three scenarios in which the FortiOS session initiation protocol (SIP) solution is usually deployed:
1. The SIP server is in a private network, protected from the internet by a FortiOS device.
2. The SIP clients are in a private network, protected from the internet by a FortiOS device.
3. The SIP server is in a private network, such as a corporation's internal network or an ISP’s network, protected from
the Internet by a FortiOS device. The SIP clients are in a remote private network, such as a SOHO network, and
behind a NAT device that is not aware of SIP applications.
The following VIP, NAT, and HNT examples show configurations for each of the three common scenarios.
VIP
A FortiGate with SIP Application Layer Gateway (ALG) or SIP Session Helper protects the SIP server from the internet,
while SIP phones from the internet need to register to the SIP server and establish calls through it.
FortiOS 6.4.2 Administration Guide 1130
Fortinet Inc.
Security Profiles
A VIP needs to be configured for the SIP server, and the VIP must be applied in a firewall policy for the phones to send
REGISTER messages through the FortiGate from port1 to port2.
Only one firewall policy needs to be configured for all SIP phones on both the internet and private network to register to
the SIP server through Port1 and set up SIP calls.
Assuming either SIP ALG or SIP Session Helper is enabled, configure the FortiGate with the following CLI commands:
config firewall vip
edit "VIP_for_SIP_Server"
set extip 172.20.120.50
set extintf "port1"
set mappedip "10.11.101.50"
next
end
config firewall policy
edit 1
set srcintf "port1"
set dstintf "port2"
set srcaddr "all"
set dstaddr "VIP_for_SIP_Server"
set action accept
set schedule "always"
set service "SIP"
next
end
Setting service to SIP and not All in the firewall policy can improve protection by restricting
the data traffic passing through the FortiGate to the SIP call traffic only.
NAT
A FortiGate with SIP ALG or SIP Session Helper protects the SIP phones and the internal network from the internet,
while SIP phones in the internal network need to register to the SIP server installed on the internet and establish calls
through it.
FortiOS 6.4.2 Administration Guide 1131
Fortinet Inc.
Security Profiles
One firewall policy needs to be configured with NAT enabled for SIP phones to send REGISTER messages through the
FortiGate from port2 to port1.
Assuming either SIP ALG or SIP Session Helper is enabled, configure the FortiGate with the following CLI commands:
config firewall policy
edit 1
set srcintf "port2"
set dstintf "port1"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "SIP"
set nat enable
next
end
HNT
A FortiGate with SIP ALG or SIP Session Helper protects the SIP server from the internet, while SIP phones are in
remote private networks behind NAT devices that are not aware of the SIP application.
For example, the SIP server is located in an ISP's service cloud that is protected by the FortiGate SIP ALG, and the
SIP phones are installed in the home networks of the ISP's customers.
FortiOS 6.4.2 Administration Guide 1132
Fortinet Inc.
Security Profiles
The SIP messages traversing the remote NAT devices might have their IP addresses translated by the NAT device at
the network layer, but untranslated at the SIP application layer because those NAT devices are not aware of the
SIP applications. This causes problems in a SIP session initiated process. Special configurations for the Hosted NAT
Traversal (HNT) are required to resolve this issue.
To configure the FortiGate with HNT support for SIP phones A and B to set up calls with each other:
1. Identify port1 as the external interface:
config system interface
edit "port1"
set external enable
next
end
FortiOS 6.4.2 Administration Guide 1133
Fortinet Inc.
Security Profiles
2. Configure VIP for the SIP server:
config firewall vip
edit "VIP_for_SIP_Server"
set extip 10.21.101.10
set extintf "port1"
set mappedip "10.30.120.20"
next
end
3. Configure a VoIP profile with HNT enabled:
config voip profile
edit "hnt"
config sip
set hosted-nat-traversal enable
set hnt-restrict-source-ip enable
end
next
end
hosted-nat-traversal must be enabled.
hnt-restrict-source-ip does not have to be enabled, but can be enabled to restrict
the RTP packets’ source IP to be the same as the SIP packets’ source IP.
4. Apply the VoIP profile and VIP in a firewall policy for phone A and B to register and set up SIP calls through the
FortiGate and SIP server:
config firewall policy
edit 1
set srcintf "port1"
set dstintf "port2"
set srcaddr "all"
set dstaddr "VIP_for_SIP_Server"
set action accept
set schedule "always"
set service "SIP"
set utm-status enable
set voip-profile “hnt”
set nat enable
next
end
nat must be enabled in the firewall policy.
SIP message inspection and filtering
SIP ALG provides users with security features to inspect and control SIP messages that are transported through FortiOS
devices, including:
l Verifying the SIP message syntax.
l Blocking particular types of SIP requests.
FortiOS 6.4.2 Administration Guide 1134
Fortinet Inc.
Security Profiles
l Restricting the rate of particular SIP requests.
These features are configured in the VoIP profile:
config voip profile
edit <voip_profile_name>
config sip set ...
The VoIP profile can then be applied to a firewall policy to process the SIP call traffic.
SIP message syntax inspection
For syntax verification, the following attributes are available for configuration in the VoIP profile to determine what action
is taken when a specific syntax error or attack based on invalid syntax is detected. For example, the action can be set to
pass or discard it.
malformed-request-line
malformed-header-via
malformed-header-from
malformed-header-to
malformed-header-call-id
malformed-header-cseq
malformed-header-rack
malformed-header-rseq
malformed-header-contact
malformed-header-record-route
malformed-header-route
malformed-header-expires
malformed-header-content-type
malformed-header-content-length
malformed-header-max-forwards
malformed-header-allow
malformed-header-p-asserted-identity
malformed-header-sdp-v
malformed-header-sdp-o
malformed-header-sdp-s
malformed-header-sdp-i
malformed-header-sdp-c
malformed-header-sdp-b
malformed-header-sdp-z
malformed-header-sdp-k
malformed-header-sdp-a
malformed-header-sdp-t
malformed-header-sdp-r
malformed-header-sdp-m
SIP message blocking
The following options are available in the VoIP profile to block SIP messages:
block-long-lines
block-unknown
block-ack
block-bye
block-cancel
FortiOS 6.4.2 Administration Guide 1135
Fortinet Inc.
Security Profiles
block-info
block-invite
block-message
block-notify
block-options
block-prack
block-publish
block-refer
block-register
block-subscribe
block-update
block-geo-red-options
SIP message rate limiting
The rate of certain types of SIP requests that are passing through the SIP ALG can be restricted :
register-rate
invite-rate
subscribe-rate
message-rate
notify-rate
refer-rate
update-rate
options-rate
ack-rate
prack-rate
info-rate
publish-rate
bye-rate
cancel-rate
SIP pinholes
When SIP ALG processes a SIP call, it usually opens pinholes for SIP signaling and RTP/RTCP packets. NAT usually
takes place during the process at both the network and SIP application layers. SIP ALG ensures that, with NAT
happening, corresponding SIP and RTP/RTCP pinholes are created during the process when it is necessary for call
sessions to be established through FortiOS devices.
By default, SIP ALG manages pinholes automatically, but some special configurations can be used to restrict the
pinholes if required.
SIP pinhole restriction
By default, the strict-register attribute is enabled. When enabled, after a SIP endpoint registers to the SIP server through
a firewall policy on the FortiOS device, only the SIP messages sent from the same IP address as the SIP server are
allowed to pass through the SIP pinhole that is created in the FortiOS device to reach the SIP endpoints. If the attribute is
disabled, SIP messages from any IP addresses can pass through the pinhole created after the registration.
config voip profile
edit "voip-profile-name"
config sip
FortiOS 6.4.2 Administration Guide 1136
Fortinet Inc.
Security Profiles
set strict-register [enable|disable]
...
end
next
end
RTP/RTCP pinhole restriction
In a SIP call through SIP ALG, the NATed RTP/RTCP port range is 5117 to 65533 by default. If required, the port range
can be restricted.
config voip profile
edit "voip-profile-name"
config sip
set nat-port-range <start_port_number>-<end_port_number>
...
end
next
end
In a SIP call session, the RTP port number is usually an even number and the RTCP port number is an odd number that
is one more than the RTP port number. It is best practice to configure start_port_number to an even number, and
end_port_number to an odd number, for example:
config voip profile
edit "voip-profile-name"
conf sip
set nat-port-range 30000-39999
end
next
end
SIP over TLS
Some SIP phones and servers can communicate using TLS to encrypt the SIP signaling traffic. To allow SIP over TLS
calls to pass through the FortiGate, the encrypted signaling traffic must be unencrypted and inspected. The FortiGate
SIP ALG intercepts, unencrypts , and inspects the SIP packets, which are then re-encrypted and forwarded to their
destination.
The SIP ALG only supports full mode TLS. This means that the SIP traffic between SIP phones and the FortiGate, and
between the FortiGate and the SIP server, is always encrypted. The highest TLS version supported by SIP ALG is TLS
1.2.
To enable SIP over TLS support, the SSL mode in the VoIP profile must be set to full. The SSL server and client
certificates can be provisioned so that the FortiGate can use them to establish connections to SIP phones and servers,
respectively.
To configure SIP over TLS:
1. Configure a VoIP profile with SSL enabled:
config voip profile
edit "tls"
FortiOS 6.4.2 Administration Guide 1137
Fortinet Inc.
Security Profiles
config sip
set ssl-mode full
set ssl-client-certificate "ssl_client_cert"
set ssl-server-certificate "ssl_server_cert"
end
next
end
The ssl_server_cert, ssl_client_cert, and key files can be generated using a certification tool, such as
OpenSLL, and imported to the local certificate store of the FortiGate from System > Certificates in the GUI. Existing
local certificates in the certificate store can also be used. As always for TLS connections, the certificates used must
be verified and trusted at the other end of the connection when required.
For example, the CA certificate of the SIP server's certificate should be imported to the FortiGate as an external CA
certification, such that the FortiGate can use it to verify the SIP server's certificate when setting up the TLS
connection. The CA certificate configured as the ssl_server_cert should be installed as the trusted certificate
on the SIP phones. The deployment of the certificates across the network depends on the SIP client and server
devices that are used in the system.
2. Apply the profile to the firewall policy:
config firewall policy
edit 1
set srcintf "port1"
set dstintf "port2"
set srcaddr "all"
set dstaddr "vip_sip_server"
set action accept
set schedule "always"
set service "SIP"
set utm-status enable
set voip-profile "tls"
next
end
Custom SIP RTP port range support
The nat-port-range variable is used to specify a port range in the VoIP profile to restrict the NAT port range for real-
time transport protocol/real-time transport control protocol (RTP/RTCP) packets in a session initiation protocol (SIP) call
session that is handled by the SIP application layer gateway (ALG) in a FortiGate device.
When NAT is enabled, or VIP is used in a firewall policy for SIP ALG to handle a SIP call session established through a
FortiGate device, the SIP ALG can perform NAT to translate the ports used for the RTP/RTCP packets when they are
flowing through the device between the external and internal networks.
You can control the translated port range for RTP/RTCP packets using the CLI:
config voip profile
edit <profile-name>
config sip
set nat-port-range <port range>
end
next
end
FortiOS 6.4.2 Administration Guide 1138
Fortinet Inc.
Security Profiles
Command Description
nat-port-range <port range> The NAT port range (minimum port number = 5117, default = 5117-65535).
Example
In this example, Phone1 is in subnet_1, and the SIP server and phone are in subnet_2. All SIP signaling messages and
RTP/RTCP packets go through the SIP Server. The RTP/RTCP ports on Phone1 are configured as 17078/17079.
The FortiGate administrator wants to use NAT for the port 17078/17079 to 30000/30001. As a result, all RTP/RTCP
packets going out of port2 have source ports of 30000/30001, and all RTP/RTCP packets going into port2 also have
destination ports of 30000/30001, which is specified in nat-port-range.
To configure the custom port range:
config voip profile
edit "natPortRange"
config sip
set nat-port-range 30000-30001
end
next
end
configure firewall policy
edit 1
set srcintf port1
set dstintf port2
set srcaddr all
set dstaddr all
set service SIP
set action accept
set schedule always
set voip-profile natPortRange
set nat enable
end
If phone1 and phone2 are registered to the SIP server, and they establish a call session between them through the
FortiGate and the SIP server, then the RTP/RTCP ports 17078/17079 of phone1 will be translated to ports 30000/30001
at the FortiGate unit based on the NAT port range setting. That is, the RTP/RTCP packets egressing port2 of the
FortiOS 6.4.2 Administration Guide 1139
Fortinet Inc.
Security Profiles
Fortigate will have source ports of 30000/30001, and the RTP/RTCP packets ingressing port2 will have destination ports
of 30000/30001.
Voice VLAN auto-assignment
You can leverage LLDP-MED to assign voice traffic to the desired voice VLAN. After detection and setup, the IP phone
on the network is segmented to its own VLAN for policy, prioritization, and reporting. The LLDP reception capabilities in
FortiOS have been extended to support LLDP-MED assignment for voice, voice signaling, guest, guest voice signaling,
softphone, video conferencing, streaming video, and video signaling.
You can configure this feature using the following steps:
1. Setting up the VLAN for the voice device
2. Setting up the DHCP server for the voice VLAN
3. Setting up the LLDP network policy
4. Enabling LLDP on the physical interface that the VLAN belongs to
5. Applying the LLDP network policy on the physical interface
6. Confirming that the VLAN was assigned
To set up the VLAN for the voice device:
config system interface
edit "vlan_100"
set vdom "root"
set ip 192.168.1.99 255.255.255.0
set alias "voice_vlan"
set device-identification enable
set role lan
set snmp-index 25
set interface "port10"
set vlanid 100
next
end
To set up the DHCP server for the voice VLAN:
config system dhcp server
edit 1
set dns-service default
set default-gateway 192.168.1.99
set netmask 255.255.255.0
set interface "vlan_100"
config ip-range
edit 1
set start-ip 192.168.1.110
set end-ip 192.168.1.210
next
end
next
end
FortiOS 6.4.2 Administration Guide 1140
Fortinet Inc.
Security Profiles
To set up the LLDP network policy:
config system lldp network-policy
edit "1"
config voice
set status enable
set tag dot1q
set vlan 100
end
next
end
To enable LLDP on the physical interface that the VLAN belongs to:
config system interface
edit "port10"
set vdom "root"
set type physical
set lldp-reception enable
set lldp-transmission enable
set snmp-index 14
next
end
To apply the LLDP network policy on the physical interface:
config system interface
edit "port10"
set lldp-network-policy "1"
next
end
To confirm that the VLAN was assigned as expected:
1. Connect an IP phone to the network.
2. Check the IP address on the phone.
The IP address should belong to the voice VLAN.
3. Sniff on the FortiGate incoming interface to see if traffic from the IP phone has the desired VLAN tag.
In the example commands above, the voice VLAN was configured as VLAN 100. Therefore, voice traffic from the IP
phone should be in VLAN 100.
ICAP
Internet Content Adaptation Protocol (ICAP) is an application layer protocol that is used to offload tasks from the firewall
to separate, specialized servers. For more information see RFC 3507.
ICAP profiles can only be applied to policies that use proxy-based inspection. If you enable ICAP in a policy, HTTP and
HTTPS (if HTTPS inspection is supported) traffic that is intercepted by the policy is transferred to the ICAP server
specified by the selected ICAP profile. Responses from the ICAP server are returned to the FortiGate, and then
forwarded to their destination.
FortiOS 6.4.2 Administration Guide 1141
Fortinet Inc.
Security Profiles
By default, ICAP is not visible in the GUI. See Feature visibility on page 821 for instructions on
making it visible.
ICAP filter profiles cannot be used in NGFW policy-based mode. See Profile-based NGFW vs
policy-based NGFW on page 836 for more information.
To configure ICAP:
1. Set up your ICAP server.
2. On the FortiGate, add an ICAP server.
3. Create an ICAP profile.
4. Use the ICAP profile in a firewall policy that covers the traffic that needs to be offloaded to the ICAP server.
ICAP configuration example
In this example, the ICAP server performs proprietary content filtering on HTTP and HTTPS requests. If the content filter
is unable to process a request, then the request is blocked. Streaming media is not considered by the filter, so it is
allowed through and is not processed.
To add the ICAP server to the FortiGate in the GUI:
1. Go to Security Profiles > ICAP Servers.
2. Click Create New.
3. In the Name field, enter a name for the ICAP server, such as content-filtration-server4.
4. Select the IP Version.
5. In the IP Address field, enter the IP address of the ICAP server.
6. In the Port field, enter a new port number if required. The default value is 1344.
7. Click OK.
The maximum number of concurrent connections to ICAP server can be configured in the CLI.
The default setting is 100 connections.
FortiOS 6.4.2 Administration Guide 1142
Fortinet Inc.
Security Profiles
To create an ICAP profile in the GUI:
1. Go to Security Profiles > ICAP.
2. Click Create New.
3. In the Name field, enter a name for the ICAP profile, such as Prop-Content-Filtration.
4. Enable Request Processing then set the following:
l Server - Select the ICAP server. In this example, select content-filtration-server4
l Path - The path to the processing component on the server, such as /proprietary_code/content-filter/.
l On Failure - Select Error to block the request. If the message cannot be processed, it will not be blocked.
5. Enable Response Processing then set the following:
l Server - Select the ICAP server: content-filtration-server4
l Path - The path to the processing component on the server, such as /proprietary_code/content-filter/.
l On Failure - Select Error to block the request. If the message cannot be processed, it will not be blocked.
6. Enable Streaming Media Bypass to not offload streaming media to the ICAP server.
7. Click OK.
To add the ICAP profile to a policy in the GUI:
1. Go to Policy & Objects > Firewall Policy.
2. Click Create New.
3. Configure the policy as needed to apply to the required traffic.
4. Set Inspection Mode to Proxy-based.
5. Under Security Profiles, enable ICAP and select the ICAP server.
6. Click OK.
FortiOS 6.4.2 Administration Guide 1143
Fortinet Inc.
Security Profiles
To configure the ICAP setup in the CLI:
1. Add the ICAP server:
config icap server
edit "content-filtration-server4"
set ip-version 4
set ip-address 172.16.100.55
set port 1344
set max-connections 200
next
end
2. Create the ICAP profile:
config icap profile
edit "Prop-Content-Filtration"
set request enable
set response enable
set streaming-content-bypass enable
set request-server "content-filtration-server4"
set response-server "content-filtration-server4"
set request-failure error
set response-failure error
set request-path "/proprietary_code/content-filter/"
set response-path "/proprietary_code/content-filter/"
set methods delete get head options post put trace other
next
end
3. Add the ICAP profile to a policy:
config firewall policy
edit 5
set name "icap_filter3"
set srcintf "virtual-wan-link"
set dstintf "virtual-wan-link"
set srcaddr "FABRIC_DEVICE"
set dstaddr "FABRIC_DEVICE"
set dstaddr-negate enable
set action accept
set schedule "always"
set service "ALL"
set utm-status enable
set inspection-mode proxy
set ssl-ssh-profile "certificate-inspection"
set icap-profile "Prop-Content-Filtration"
set logtraffic disable
set fsso disable
set nat enable
next
end
ICAP response filtering
ICAP HTTP responses can be forwarded or bypassed based on the HTTP header value and status code.
When configuring the ICAP profile, if response is enabled, the respmod-default-action option can be configured:
FortiOS 6.4.2 Administration Guide 1144
Fortinet Inc.
Security Profiles
l If respmod-default-action is set to forward, FortiGate will treat every HTTP response, and send ICAP
requests to the ICAP server.
l If respmod-default-action is set to bypass, FortiGate will only send ICAP requests if the HTTP response
matches the defined rules, and the rule's action is set to forward.
When configuring a response rule:
l The http-resp-status-code option is configured to specific HTTP response codes. If the HTTP response has
any one of the configured values, then the rule takes effect.
l Multiple header value matching groups can be configured. If the header value matches one of the groups, then the
rule takes effect.
l If both status codes and header values are specified in a rule, the response must match at least one of each.
The UTM ICAP log category is used for logging actions when FortiGate encounters errors with the ICAP server, such as
no service, unreachable, error response code, or timeout. If an error occurs, a traffic log and an associated UTM ICAP
log will be created.
Example
The FortiGate acts as a gateway for the client PC and connects to a reachable ICAP server. The ICAP server can be in
NAT, transparent, or proxy mode.
In this example, client request HTTP responses will be forwarded to the ICAP server from all hosts if they have an HTTP
status code of 200, 301, or 302, and have content-type: image/jpeg in the their header.
To configure an ICAP profile with HTTP response rules:
config icap profile
edit "icap_profile2"
set request disable
set response enable
set streaming-content-bypass disable
set preview disable
set response-server "icap_server1"
set response-failure error
set response-path ''
set methods delete get head options post put trace other
set response-req-hdr disable
set respmod-default-action bypass
config respmod-forward-rules
FortiOS 6.4.2 Administration Guide 1145
Fortinet Inc.
Security Profiles
edit "rule2"
set host "all"
set action forward
set http-resp-status-code 200 301 302
config header-group
edit 2
set header-name "content-type"
set header "image/jpeg"
next
end
next
end
next
end
To view the logs if an error occurs:
1. View the traffic log:
# execute log filter category 0
# execute log display
1 logs found.
1 logs returned.
1: date=2019-10-25 time=17:43:47 logid="0000000013" type="traffic" subtype="forward"
level="notice" vd="vdom1" eventtime=1572050627037314464 tz="-0700" srcip=10.1.100.145
srcport=47968 srcintf="port1" srcintfrole="undefined" dstip=172.16.200.46 dstport=80
dstintf="port2" dstintfrole="undefined" poluuid="a4d5324e-f6c3-51e9-ce2d-f360994fb547"
sessionid=43549 proto=6 action="close" policyid=1 policytype="policy" service="HTTP"
dstcountry="Reserved" srccountry="Reserved" trandisp="snat" transip=172.16.200.1
transport=47968 duration=1 sentbyte=485 rcvdbyte=398 sentpkt=6 rcvdpkt=5
appcat="unscanned" wanin=478 wanout=165 lanin=165 lanout=165 utmaction="block"
counticap=1 crscore=5 craction=262144 crlevel="low" utmref=65532-0
2. View the UTM ICAP log:
# execute log filter category 20
# execute log display
1 logs found.
1 logs returned.
1: date=2019-10-25 time=17:43:46 logid="2000060000" type="utm" subtype="icap"
eventtype="icap" level="warning" vd="vdom1" eventtime=1572050626010097145 tz="-0700"
msg="Request blocked due to ICAP server error" service="HTTP" srcip=10.1.100.145
dstip=172.16.200.46 srcport=47968 dstport=80 srcintf="port1" srcintfrole="undefined"
dstintf="port2" dstintfrole="undefined" policyid=1 sessionid=43549 proto=6
action="blocked" profile="icap_profile1" url="/icap_test/"
The logs show that, in this case, the ICAP services stopped before the access. When the client tried to access HTTP and
ICAP took effect, the FortiGate sent the ICAP request to the ICAP server and received an error. The client sees a 502
Bad Gateway message, and FortiGate writes the two logs. In the GUI, the logged traffic is displayed as
Result: Deny: UTM Blocked.
FortiOS 6.4.2 Administration Guide 1146
Fortinet Inc.
Security Profiles
Web application firewall
Web application firewall (WAF) profiles can detect and block known web application attacks. You can configure WAF
profiles to use signatures and constraints to examine web traffic. You can also enforce an HTTP method policy, which
controls the HTTP method that matches the specified pattern.
You can customize the default profile, or you can create your own profile to apply access rules and HTTP protocol
constraints to traffic. You can apply WAF profiles to firewall policies when the inspection mode is set to proxy-based.
Web application firewall profiles cannot be used NGFW policy-based mode. See Profile-based
NGFW vs policy-based NGFW on page 836 for more information.
The following topic provides information about WAF profiles:
l Protecting a server running web applications on page 1147
Protecting a server running web applications
You can use a web application firewall profile to protect a server that is running a web application, such as webmail.
Web application firewall profiles are created with a variety of options called signatures and constraints. Once these
options are enabled, the action can be set to allow, monitor, or block. The severity can be set to high, medium, or low.
In the following example, the default profile will be targeted to block SQL injection attempts and generic attacks.
The web application firewall feature is only available when the policy inspection mode is proxy-
based.
FortiOS 6.4.2 Administration Guide 1147
Fortinet Inc.
Security Profiles
To protect a server running web applications:
1. Enable the web application firewall:
a. Go to System > Feature Visibility.
b. Under Security Features, enable Web Application Firewall.
c. Under Additional Features, click Show More and enable Multiple Security Profiles.
d. Click Apply.
2. Edit the default web application firewall profile:
Trojans and Known Exploits are blocked by default.
FortiOS 6.4.2 Administration Guide 1148
Fortinet Inc.
Security Profiles
a. Go to Security Profiles > Web Application Firewall.
b. Edit the default profile signature:
i. Enable SQL Injection (Extended) and Generic Attacks (Extended).
ii. For both signatures, set the Action to Block and the Severity to High.
iii. Click Apply.
3. Apply the profile to a security policy:
a. Go to Policy & Objects > Firewall Policy.
b. Edit the policy that allows access to the web server:
i. Under Firewall / Network Options, select the appropriate Protocol Option.
ii. Under Security Profiles, enable Web Application Firewall and set it to use the default profile.
FortiOS 6.4.2 Administration Guide 1149
Fortinet Inc.
Security Profiles
iii. Set the SSL Inspection to use the deep-inspection profile.
iv. Click OK.
4. Verify that the web application firewall blocks traffic:
a. Use the following URL to simulate an attack on your web server and substitute the IP address of your server:
http://<server
IP>/index.php?username=1'%20or%20'1'%20=%20'1&password=1'%20or%20'1'%20=%20'1
An error message appears, stating that the web application firewall has blocked the traffic:
Offloading to a FortiWeb
If you have a FortiWeb, you may be able to offload the functions of the web application control to your FortiWeb. To find
out if this option is available, refer to the FortiOS or FortiWeb Release Notes for information about device compatibility.
To offload to a FortiWeb:
1. Go to Security Fabric > Fabric Connectors.
2. Click Create New, and click Fabric Device.
3. Enter the following for the device:
a. Name (FortiWeb)
b. FortiWeb IP address
c. HTTPS service port
4. Click Generate.
5. Enter your credentials to generate the access token.
6. Click OK.
FortiOS 6.4.2 Administration Guide 1150
Fortinet Inc.
Security Profiles
SSL & SSH Inspection
Secure sockets layer (SSL) content scanning and inspection allows you to apply antivirus scanning, web filtering, and
email filtering to encrypted traffic. You can apply SSL inspection profiles to firewall policies.
FortiOS includes four preloaded SSL/SSH inspection profiles, three of which are read-only and can be cloned:
l certificate-inspection
l deep-inspection
l no-inspection
The custom-deep-inspection profile can be edited, or you can create your own SSL/SSH inspection profiles.
Deep inspection (also known as SSL/SSH inspection) is typically applied to outbound policies where destinations are
unknown. Depending on your policy requirements, you can configure the following:
l Which CA certificate will be used to decrypt the SSL encrypted traffic
l Which SSL protocols will be inspected
l Which ports will be associated with which SSL protocols for inspection
l Whether or not to allow invalid SSL certificates
l Whether or not SSH traffic will be inspected
l Which addresses or web category allowlists can bypass SSL inspection
The following topics provide information about SSL & SSH Inspection:
l Certificate inspection on page 1151
l Deep inspection on page 1153
l Protecting an SSL server on page 1155
l Ignoring the AUTH TLS command on page 1156
l SSH traffic file scanning on page 1157
l Redirect to WAD after handshake completion on page 1158
Certificate inspection
FortiGate supports certificate inspection. The default configuration has a built-in certificate-inspection profile which you
can use directly. When you use certificate inspection, the FortiGate only inspects the headers up to the SSL/TLS layer.
If you do not want to deep scan for privacy reasons but you want to control web site access, you can use certificate-
inspection.
Inspect non-standard HTTPS ports
The built-in certificate-inspection profile is read-only and only listens on port 443. If you want to make changes, you must
create a new certificate inspection profile.
If you know the non-standard port that the web server uses, such as port 8443, you can add this port to the HTTPS field.
FortiOS 6.4.2 Administration Guide 1151
Fortinet Inc.
Security Profiles
If you do not know which port is used in the HTTPS web server, you can select Inspect All Ports.
Block untrusted or allow invalid certificate
The default setting in the certificate-inspection profile is to block invalid certificates and allow untrusted certificates.
For example, the server certificate has expired but you still want to access this server until you have a new server
certificate. But because certificate inspection cannot do an exemption, you have to allow the invalid certificate in your
SSL profile. This means you need to create a new certificate inspection profile using the built-in read-only certificate-
inspection.
FortiOS 6.4.2 Administration Guide 1152
Fortinet Inc.
Security Profiles
Deep inspection
You can configure address and web category allowlists to bypass SSL deep inspection.
Reasons for using deep inspection
While Hypertext Transfer Protocol Secure (HTTPS) offers protection on the Internet by applying Secure Sockets Layer
(SSL) encryption to web traffic, encrypted traffic can be used to get around your network's normal defenses.
For example, you might download a file containing a virus during an e-commerce session, or you might receive a
phishing email containing a seemingly harmless download that, when launched, creates an encrypted session to a
command and control (C&C) server and downloads malware onto your computer. Because the sessions in these attacks
are encrypted, they might get past your network's security measures.
When you use deep inspection, the FortiGate impersonates the recipient of the originating SSL session, then decrypts
and inspects the content to find threats and block them. It then re-encrypts the content and sends it to the real recipient.
Deep inspection not only protects you from attacks that use HTTPS, it also protects you from other commonly-used SSL-
encrypted protocols such as SMTPS, POP3S, IMAPS, and FTPS.
FortiOS 6.4.2 Administration Guide 1153
Fortinet Inc.
Security Profiles
Browser messages when using deep inspection
When FortiGate re-encrypts the content, it uses a certificate stored on the FortiGate such as Fortinet_CA_SSL, Fortinet_
CA_Untrusted, or your own CA certificate that you uploaded.
Because there is no Fortinet_CA_SSL in the browser trusted CA list, the browser displays an untrusted certificate
warning when it receives a FortiGate re-signed server certificate. To stop the warning messages, trust the FortiGate-
trusted CA Fortinet_CA_SSL and import it into your browser.
After importing Fortinet_CA_SSL into your browser, if you still get messages about untrusted certificate, it must be due to
Fortinet_CA_Untrusted. Never import the Fortinet_CA_Untrusted certificate into your browser.
To import Fortinet_CA_SSL into your browser:
1. On the FortiGate, go to Security Profiles > SSL/SSH Inspection and edit the deep-inspection profile.
The default CA Certificate is Fortinet_CA_SSL.
2. Click Download and save the certificate to the management computer.
3. On the client PC, use the Certificate Import Wizard to install the certificate into the Trusted Root Certificate
Authorities store.
If a security warning appears, select Yes to install the certificate.
Exempt web sites from deep inspection
If you do not want to apply deep inspection for privacy or other reasons, you can exempt the session by address,
category, or allowlist.
If you know the address of the server you want to exempt, you can exempt that address. You can exempt specific
address type including IP address, IP address range, IP subnet, FQDN, wildcard-FQDN, and geography.
FortiOS 6.4.2 Administration Guide 1154
Fortinet Inc.
Security Profiles
If you want to exempt all bank web sites, an easy way is to exempt the Finance and Banking category which includes all
finance and bank web sites identified in FortiGuard. For information about creating and using custom local and remote
categories, see Web rating override on page 1164 and Threat feeds on page 296.
If you want to exempt commonly trusted web sites, you can bypass the SSL allowlist in the SSL/SSH profile by enabling
Reputable Websites. The allowlist includes common web sites trusted by FortiGuard.
Protecting an SSL server
You typically use the FortiGate Protecting SSL Server profile as an inbound policy for clients on the internet that access
the server through the internal side of the FortiGate.
Protecting SSL Server uses a server certificate to protect a single server.
You can use Protecting SSL Server if you do not want a client on the internet to directly access your internal server, and
you want the FortiGate to simulate your real server.
To upload a server certificate into FortiGate and use that certificate in the SSL/SSH inspection profile:
1. Go to System > Certificates.
2. Select Import > Local Certificate and upload the certificate.
3. Go to Security Profiles > SSL/SSH Inspection and edit or create a new profile.
4. For Enable SSL Inspection of, select Protecting SSL Server.
5. For Server Certificate, select the local certificate you imported.
FortiOS 6.4.2 Administration Guide 1155
Fortinet Inc.
Security Profiles
6. Click Apply.
When you apply the Protecting SSL Server profile in a policy, the FortiGate will send the server certificate to the client as
your server does.
Ignoring the AUTH TLS command
If the FortiGate receives an AUTH TLS (PBSZ and PROT) command before receiving plain text traffic from a decrypted
device, by default, it will expect encrypted traffic, determine that the traffic belongs to an abnormal protocol, and bypass
the traffic.
When the ssl-offloaded command is enabled, the AUTH TLS command is ignored, and the traffic is treated as plain
text rather than encrypted data. SSL decryption and encryption are performed by an external device.
To enable SSL offloading:
config firewall profile-protocol-options
edit "test"
config ftp
set ssl-offloaded yes
end
config imap
set ssl-offloaded yes
end
config pop3
set ssl-offloaded yes
end
config smtp
set ssl-offloaded yes
end
next
end
FortiOS 6.4.2 Administration Guide 1156
Fortinet Inc.
Security Profiles
SSH traffic file scanning
FortiGates can buffer, scan, log, or block files sent over SSH traffic (SCP and SFTP) depending on the file size, type, or
contents (such as viruses or sensitive content).
This feature is supported in proxy-based inspection mode. It is currently not supported in flow-
based inspection mode.
You can configure the following SSH traffic settings in the CLI:
l Protocol options
l DLP sensor
l Antivirus (profile and quarantine options)
To configure SSH protocol options:
config firewall profile-protocol-options
edit "protocol"
config ssh
set options [oversize | clientcomfort | servercomfort]
set comfort-interval [1 - 900]
set comfort-amount [1 - 65535]
set oversize-limit [1 - 798]
set uncompressed-oversize-limit [0 - 798]
set uncompressed-nest-limit [2 - 100]
set scan-bzip2 [enable | disable]
end
next
end
To configure SCP block and log options:
config ssh-filter profile
edit "ssh-test"
set block scp
set log scp
next
end
To configure the DLP sensor:
config dlp sensor
edit "test"
set full-archive-proto ssh
set summary-proto ssh
config filter
edit 1
set proto ssh
next
end
next
end
FortiOS 6.4.2 Administration Guide 1157
Fortinet Inc.
Security Profiles
To configure the antivirus profile options:
config antivirus profile
edit "av"
config ssh
set options [scan | avmonitor | quarantine]
set archive-block [encrypted | corrupted | partiallycorrupted | multipart |
nested | mailbomb | fileslimit | timeout | unhandled]
set archive-log [encrypted | corrupted | partiallycorrupted | multipart | nested
| mailbomb | fileslimit | timeout | unhandled]
set emulator [enable | disable]
set outbreak-prevention [disabled | files | full-archive]
end
next
end
To configure the antivirus quarantine options:
config antivirus quarantine
set drop-infected ssh
set store-infected ssh
set drop-blocked ssh
set store-blocked ssh
set drop-heuristic ssh
set store-heuristic ssh
end
Redirect to WAD after handshake completion
In a proxy-based policy, the TCP connection is proxied by the FortiGate. A TCP 3-way handshake can be established
with the client even though the server did not complete the handshake.
This option uses IPS to handle the initial TCP 3-way handshake. It rebuilds the sockets and redirects the session back to
proxy only when the handshake with the server is established.
To enable proxy after a TCP handshake in an SSL/SSH profile:
config firewall ssl-ssh-profile
edit "test"
config https
set ports 443
set status certificate-inspection
set proxy-after-tcp-handshake enable
end
.....
next
end
To enable proxy after a TCP handshake in protocol options:
config firewall profile-protocol-options
edit "test"
config http
set ports 80
FortiOS 6.4.2 Administration Guide 1158
Fortinet Inc.
Security Profiles
set proxy-after-tcp-handshake enable
unset options
unset post-lang
end
....
next
end
Custom signatures
You can create the following custom signatures and apply them to firewall policies:
l IPS signature
l Application signature
l Application group
The following topic provides information about custom signatures:
l Application groups in policies on page 1159
l Blocking applications with custom signatures on page 1162
Application groups in policies
This feature provides an application group command for firewall shaping policies.
The following CLI command is used:
config firewall shaping-policy
edit 1
set app-group <application group>...
......
next
end
Example
In this example, there are two traffic shaping policies:
l Policy 1 is for traffic related to cloud applications that has high priority.
l Policy 2 is for other traffic and has low priority.
FortiOS 6.4.2 Administration Guide 1159
Fortinet Inc.
Security Profiles
To create the shaping policies using the GUI:
1. Configure an application group for cloud applications:
a. Go to Security Profiles > Application Signatures.
b. Click Create New > Application Group. The New Application Group page opens.
c. Enter a name for the group, select the type, and then add the group the members.
d. Click OK.
2. Create the shaping policy for the high priority cloud application traffic:
a. Go to Policy & Objects > Traffic Shaping Policy.
b. Click Create New. The New Shaping Policy page opens.
c. Configure the shaping policy, selecting the previously created cloud application group, and setting both the
Shared shaper and Reverse shaper to high-priority.
d. Click OK.
At least one firewall policy must have application control enabled for the applications to
match any policy traffic.
FortiOS 6.4.2 Administration Guide 1160
Fortinet Inc.
Security Profiles
3. Create the shaping policy for all other traffic, setting both the Shared shaper and Reverse shaper to low-priority.
To create the shaping policies using the CLI:
1. Configure an application group for cloud applications:
config application group
edit "cloud app group"
set application 27210 36740 35944 24467 33048
next
end
2. Create the shaping policies for the high priority cloud application traffic and the other, low priority traffic:
config firewall shaping-policy
edit 1
set name "For Cloud Traffic"
set service "ALL"
set app-category 30
set app-group "cloud app group"
set dstintf "port1"
set traffic-shaper "high-priority"
set traffic-shaper-reverse "high-priority"
set srcaddr "all"
set dstaddr "all"
next
edit 2
set name "For Other Traffic"
set service "ALL"
set dstintf "port1"
set traffic-shaper "low-priority"
set traffic-shaper-reverse "low-priority"
set srcaddr "all"
set dstaddr "all"
next
end
FortiOS 6.4.2 Administration Guide 1161
Fortinet Inc.
Security Profiles
Blocking applications with custom signatures
Custom signatures can be used in application control profiles to block web traffic from specific applications, such as out
of support operating systems.
In this example, you create a custom signature to detect PCs running Windows NT 6.1 operating systems, including
Windows 7 and Windows Server 2008 R2. The signature is added to an application control profile and the action is set to
block. The profile is then used in a firewall policy so that web traffic matching the signature is blocked. The logs
generated by this example can be used to help identify other computers that you need to block.
To make the settings visible in the GUI:
1. Go to System > Feature Visibility
2. In the Security Features section, enable Application Control.
3. Click Apply.
To create the custom application signature:
1. Go to Security Profiles > Application Signatures and click Create New > Custom Application Signature.
2. Enter a name for the custom signature, such as block_nt_6.1.
3. Enter the Signature. In this example:
F-SBID( --attack_id 6483; --name "Windows.NT.6.1.Web.Surfing"; --default_action drop_
session; --service HTTP; --protocol tcp; --app_cat 25; --flow from_client; --pattern
!"FCT"; --pattern "Windows NT 6.1"; --no_case; --context header; --weight 40; )
This signature scans HTTP and HTTPS traffic that matches the pattern Windows NT 6.1 in its header. For blocking
older versions of Windows, such as Windows XP, you would use the pattern Windows NT 5.1. An attack ID is
automatically generated when the signature is created.
4. Click OK.
The signature is included in the Custom Application Signature section of the signature list.
FortiOS 6.4.2 Administration Guide 1162
Fortinet Inc.
Security Profiles
To use the signature in an application control profile:
1. Go to Security Profiles > Application Control.
2. Create a new profile, or edit an existing one.
3. In the Application and Filter Overrides table, click Create New.
4. Set Type to Application and Action to Block.
5. Select the custom signature from the list, using the search feature if required, then click Add Selected.
6. Click OK.
The signature is added to the table.
7. Click OK.
To add the application control profile to a firewall policy:
1. Go to Policy & Objects > Firewall Policy.
2. Edit the policy that is currently allows a connection from the internal network to the internet.
3. In the Security Profiles section, enable Application Control and select the profile.
If deep inspection is not enabled, then only HTTP traffic will be scanned. To scan HTTPS traffic, set SSL Inspection
to a profile that includes deep inspection. See SSL & SSH Inspection on page 1151 for more information.
4. Click OK.
Results
When a PC that is running one of the affected operating systems tries to connect to the internet using a web browser, a
replacement message is shown. For information on customizing replacement messages, see Replacement messages
on page 799.
Go to Log & Report > Application Control to view the web traffic that is logged for the PC that is blocked by the application
signature.
FortiOS 6.4.2 Administration Guide 1163
Fortinet Inc.
Security Profiles
Overrides
Web filter configuration can be separated into profile configuration and profile overrides.
You can also override web filter behavior based on the FortiGuard website categorization:
l Use alternate categories (web rating overrides): this method manually assigns a specific website to a different
Fortinet category or a locally-created category.
l Use alternate profiles: configured users or IP addresses can use an alternative web filter profile when attempting to
access blocked websites.
Some features of this functionality require a subscription to FortiGuard Web Filtering.
The following topics provide information about web overrides:
l Web rating override on page 1164
l Web profile override on page 1168
Web rating override
Web rating overrides allow you to add specific URLs to both FortiGuard and custom web ratings categories.
In a web filter profile, the action for each category can be configured. See FortiGuard filter on page 1039 for details. A
web rating override in a custom category will not impact any web filters until the category's action is changed to Monitor,
FortiOS 6.4.2 Administration Guide 1164
Fortinet Inc.
Security Profiles
Block, Warning, or Authenticate in the specific web filter profile's settings. If a URL is in multiple enabled categories, the
order of precedence is local categories, then remote categories, and then FortiGuard categories.
In SSL/SSH inspection profiles, custom categories must be explicitly selected to be exempt from SSL inspection. In
proxy addresses, custom categories must be explicitly selected as URL categories for them to apply. In both settings, if a
URL is in multiple selected categories, the order of precedence is local categories, then remote categories, and then
FortiGuard categories.
Web rating override requires a FortiGuard license.
In this example, www.fortinet.com is added to the a new custom category called Seriously. The Seriously category action
is set to Monitor in a web filter profile, overriding the action applied to the Information Technology category and to any
remote categories that also contain the URL. The category is also added to a proxy address, and used in an SSL/SSH
inspection profile to exempt it from SSL inspection.
To create a custom category in the GUI:
1. Go to Security Profiles > Web Rating Overrides.
2. Click Custom Categories, then click Create New.
3. Enter a name for the category, and adjust the Status as needed.
4. Click OK.
To create a new web rating override and add it to a category in the GUI:
1. Go to Security Profiles > Web Rating Overrides and click Create New.
2. Enter the URL to override.
3. Optionally, click Lookup rating to see what its current rating is, if it has one.
4. Select the new Category and Sub-Category for the override.
5. Click OK.
To use the new category in a web filter profile in the GUI:
1. Go to Security Profiles > Web Filter and create or edit a web filter profile. See FortiGuard filter on page 1039 for
more information.
FortiOS 6.4.2 Administration Guide 1165
Fortinet Inc.
Security Profiles
2. Enable FortiGuard category based filter and change the action for the Seriously category in the Local Categories
group to Monitor.
When the action for a custom category is Allow, the category is disabled. The next
category's action in the order of preference will be applied.
3. Configure the remaining settings are required, then click OK.
To create a custom category, add an override to it, and use it in a web filter profile in the CLI:
1. Create the custom category and add a URL to it.
config vdom
edit root
config webfilter ftgd-local-cat
edit "Seriously"
set id 140
next
end
config webfilter ftgd-local-rating
edit "www.fortinet.com"
set rating 140
next
end
next
end
2. Enable the new category in a web filter profile. See FortiGuard filter on page 1039 for details.
Custom local categories have an ID range of 140 to 191.
config vdom
edit root
config webfilter profile
edit "WebFilter-1"
set feature-set proxy
config ftgd-wf
unset options
FortiOS 6.4.2 Administration Guide 1166
Fortinet Inc.
Security Profiles
config filters
edit 12
set category 12
set action warning
next
...
edit 140
set category 140
next
...
end
end
next
end
next
end
When a filter is added for the custom category (140 in this example), the default action is monitor.
To use the custom category in an SSL/SSH inspection profile to exempt it from SSL inspection in the
GUI:
1. Go to Security Profiles > SSL/SSH Inspection.
2. Create a new profile or edit an existing one.
3. Ensure that Inspection method is Full SSL Inspection.
4. In the Exempt from SSL Inspection section, add the local category to the Web categories list .
5. Configure the remaining settings as required, then click OK.
To use the custom category in an SSL/SSH inspection profile to exempt it from SSL inspection in the
CLI:
config firewall ssl-ssh-profile
edit "SSL_Inspection"
config https
set ports 443
set status deep-inspection
end
...
config ssl-exempt
edit 1
set fortiguard-category 140
next
end
FortiOS 6.4.2 Administration Guide 1167
Fortinet Inc.
Security Profiles
next
end
To use the custom category in a proxy address in the GUI:
1. Go to Policy & Objects > Addresses and click Create New > Address, or edit an existing proxy address.
2. Set Category to Proxy Address.
3. Set Type to URL Category.
4. In the URL Category, add the custom category.
5. Configure the remaining settings as required, then click OK.
To use the custom category in a proxy address in the CLI:
config firewall proxy-address
edit "proxy_override"
set type category
set host "all"
set category 140 194
set color 23
next
end
Web profile override
You can use the following profile override methods:
l Administrative override
l Allow users to override blocked categories
FortiOS 6.4.2 Administration Guide 1168
Fortinet Inc.
Security Profiles
Administrative override
Administrators can grant temporary access to sites that are otherwise blocked by a web filter profile. You can grant
temporary access to a user, user group, or source IP address. You can set the time limit by selecting a date and time.
The default is 15 minutes.
When the administrative web profile override is enabled, a blocked access page or replacement message does not
appear, and authentication is not required.
Scope range
You can choose one of the following scope ranges:
l User: authentication for permission to override is based on whether or not the user is using a specific user account.
l User group: authentication for permission to override is based on whether or not the user account supplied as a
credential is a member of the specified user group.
l Source IP: authentication for permission to override is based on the IP address of the computer that was used to
authenticate. This would be used for computers that have multiple users. For example, if a user logs on to the
computer, engages the override by using their credentials, and then logs off, anyone who logs on with an account
on that computer would be using the alternate override web filter profile.
When you enter an IP address in the administrative override method, only individual IP
addresses are allowed.
Differences between IP and identity-based scope
Using the IP scope does not require using an identity-based policy.
When using the administrative override method and IP scope, you might not see a warning message when you change
from using the original web filter profile to using the alternate profile. There is no requirement for credentials from the
user so, if allowed, the page will just appear in the browser.
Configuring a web profile administrative override
This example describes how to override the webfilter profile with the webfilter_new profile.
To configure web profile administrative override using the GUI:
1. Go to Security Profiles > Web Profile Overrides and click Create New.
The New Administrative Override pane opens.
2. Configure the administrative override:
a. For Scope Range, click Source IP.
b. In the Source IP field, enter the IP address for the client computer (10.1.100.11 in this example).
c. In the Original profile dropdown, select webfilter.
d. In the New profile dropdown, select webfilter_new.
In the Expires field, the default 15 minutes appears, which is the desired duration for this example.
FortiOS 6.4.2 Administration Guide 1169
Fortinet Inc.
Security Profiles
3. Click OK.
To configure web profile administrative override using the CLI:
config webfilter override
edit 1
set status enable
set scope ip
set old-profile "webfilter"
set new-profile "webfilter_new"
set expires 2020/08/12 12:00:00
set initiator "admin"
set ip 10.1.100.11
next
end
Allow users to override blocked categories
For both override methods, the scope ranges (for specified users, user groups, or IP addresses) allow sites blocked by
web filtering profiles to be overridden for a specified length of time.
But there is a difference between the override methods when the users or user group scope ranges are selected. In both
cases, you would need to apply the user or user group as source in the firewall policy. With administrative override, if you
do not apply the source in the firewall policy, the traffic will not match the override and will be blocked by the original
profile. With Allow users to override blocked categories, the traffic will also be blocked, but instead of displaying a
blocking page, the following message appears:
FortiOS 6.4.2 Administration Guide 1170
Fortinet Inc.
Security Profiles
When you choose the user group scope, once one user overrides, it will affect the other users in the group when they
attempt to override. For example, user1 and user2 both belong to the local_user group. Once user1 successfully
overrides, this will generate an override entry for the local_user group instead of one specific user. This means that if
user2 logs in from another PC, they can override transparently.
Other features
Besides the scope, there are some other features in Allow users to override blocked categories.
Apply to group(s)
Individual users can not be selected. You can select one or more of the user groups recognized by the FortiGate. They
can be local to the system or from a third party authentication device, such as an AD server through FSSO.
Switch duration
Administrative override sets a specified time frame that is always used for that override. The available options in Allow
users to override blocked categories are:
l Predefined: the value entered is the set duration (length of time in days, hours, or minutes) that the override will be
in effect. If the duration variable is set to 15 minutes, the length of the override will always be 15 minutes. The option
will be visible in the override message page, but the setting will be grayed out.
l Ask: the user has the option to set the override duration once it is engaged. The user can set the duration in terms of
days, hours, or minutes.
Creating a web profile users override
This example describes how to allow users in the local_group to override the webfilter_new profile.
To allow users to override blocked categories using the GUI:
1. Go to Security Profiles > Web Filter and click Create New.
2. Enter a name for the profile.
3. Enable Allow users to override blocked categories.
FortiOS 6.4.2 Administration Guide 1171
Fortinet Inc.
Security Profiles
4. Configure the web filter profile:
a. Click the Groups that can override field, and select a group (local_group in this example).
b. Click the Profile Name field, and select the webfilter_new profile.
c. For the Switch applies to field, click IP.
d. For the Switch Duration field, click Predefined. The default 15 minutes appears, which is the desired duration
for this example.
e. Configure the rest of the profile as needed.
5. Click OK.
Using the ask feature
This option is only available in the Allow users to override blocked categories method. It configures the message page to
have the user choose which scope they want to use. Normally on the message page, the scope options are grayed out
and not editable. In the following example, the Scope is predefined with IP.
When the ask option is enabled (through the Switch applies to field in the GUI), the Scope dropdown is editable. Users
can choose one of the following:
l User
l User group
l IP
FortiOS 6.4.2 Administration Guide 1172
Fortinet Inc.
Security Profiles
User and User Group are only available when there is a user group in the firewall policy. You
must specify a user group as a source in the firewall policy so the scope includes User and
User Group; otherwise, only the IP option will be available.
FortiOS 6.4.2 Administration Guide 1173
Fortinet Inc.
VPN
Virtual Private Network (VPN) technology lets remote users connect to private computer networks to gain access to their
resources in a secure way. For example, an employee traveling or working at home can use a VPN to securely access
the office network through the Internet.
Instead of remotely logging into a private network using an unencrypted and unsecured Internet connection, using a
VPN ensures that unauthorized parties cannot access the office network and cannot intercept information going
between the employee and the office. Another common use of a VPN is to connect the private networks of multiple
offices.
Fortinet offers VPN capabilities in the FortiGate Unified Threat Management (UTM) appliance and in the FortiClient
Endpoint Security suite of applications. You can install a FortiGate unit on a private network and install FortiClient
software on the user’s computer. You can also use a FortiGate unit to connect to the private network instead of using
FortiClient software.
The following sections provide information about VPN:
l IPsec VPNs on page 1174
l SSL VPN on page 1410
IPsec VPNs
The following sections provide instructions on configuring IPsec VPN connections in FortiOS 6.4.2.
l General IPsec VPN configuration on page 1174
l Site-to-site VPN on page 1199
l Remote access on page 1244
l Aggregate and redundant VPN on page 1278
l Overlay Controller VPN (OCVPN) on page 1313
l ADVPN on page 1344
l Other VPN topics on page 1378
l VPN IPsec troubleshooting on page 1403
General IPsec VPN configuration
The following sections provide instructions on general IPsec VPN configurations:
l Network topologies on page 1175
l Phase 1 configuration on page 1175
l Phase 2 configuration on page 1190
l VPN security policies on page 1194
l Blocking unwanted IKE negotiations and ESP packets with a local-in policy on page 1198
FortiOS 6.4.2 Administration Guide 1174
Fortinet Inc.
VPN
Network topologies
The topology of your network will determine how remote peers and clients connect to the VPN and how VPN traffic is
routed.
Topology Description
Site-to-Site Standard one-to-one VPN between two FortiGates. See Site-to-site VPN on page
1199.
Hub and spoke/ADVPN One central FortiGate (hub) has multiple VPNs to other remote FortiGates
(spokes). In ADVPN, shortcuts can be created between spokes for direct
communication. See ADVPN on page 1344.
OCVPN Fortinet's cloud based solution for automating VPN setup between devices
registered to the same account. See Overlay Controller VPN (OCVPN) on page
1313.
FortiClient dialup Typically remote FortiClient dialup clients use dynamic IP addresses through NAT
devices. The FortiGate acts as a dialup server allowing dialup VPN connections
from multiple sources. See FortiClient as dialup client on page 1250.
FortiGate dialup Similar to site-to-site except one end is a dialup server and the other end is a
dialup client. This facilitates scenarios in which the remote dialup end has a
dynamic address, or does not have a public IP, possibly because it is behind NAT.
See FortiGate as dialup client on page 1244.
Aggregate VPN Natively support aggregating multiple VPN tunnels to increase performance and
provide redundancy over multiple links. See IPsec aggregate for redundancy and
traffic load-balancing on page 1295.
Redundant VPN Options for supporting redundant and partially redundant IPsec VPNs, using
route-based approaches. See Redundant hub and spoke VPN on page 1305.
L2TP over IPsec Configure VPN for Microsoft Windows dialup clients using the built in L2TP
software. Users do not have to install any Fortinet software. See L2TP over IPsec
on page 1268.
GRE over IPsec Legacy support for routers requiring point-to-point GRE over IPsec for tunneling.
See GRE over IPsec on page 1211.
Phase 1 configuration
Phase 1 configuration primarily defines the parameters used in IKE (Internet Key Exchange) negotiation between the
ends of the IPsec tunnel. The local end is the FortiGate interface that initiates the IKE negotiations. The remote end is
the remote gateway that responds and exchanges messages with the initiator. Hence, they are sometimes referred to as
the initiator and responder. The purpose of phase 1 is to secure a tunnel with one bi-directional IKE SA (security
association) for negotiating IKE phase 2 parameters.
The auto-negotiate and negotiation-timeout commands control how the IKE negotiation is processed when
there is no traffic, and the length of time that the FortiGate waits for negotiations to occur.
FortiOS 6.4.2 Administration Guide 1175
Fortinet Inc.
VPN
IPsec tunnels can be configured in the GUI using the VPN Creation Wizard. Go to VPN > IPsec Wizard. The wizard
includes several templates (site-to-site, hub and spoke, remote access), but a custom tunnel can be configured with the
following settings:
Name Phase 1 definition name.
The maximum length is 15 characters for an interface mode VPN and 35
characters for a policy-based VPN.
For a policy-based VPN, the name normally reflects where the remote
connection originates. For a route-based tunnel, the FortiGate also uses the
name for the virtual IPsec interface that it creates automatically.
Network
IP Version Protocol, either IPv4 or IPv6.
Remote Gateway Category of the remote connection:
l Static IP Address: the remote peer has a static IP address.
l Dialup User: one or more FortiClient or FortiGate dialup clients with
dynamic IP addresses will connect to the FortiGate.
l Dynamic DNS: a remote peer that has a domain name and subscribes to
a dynamic DNS service will connect to the FortiGate.
IP Address The IP address of the remote peer. This option is only available when the
Remote Gateway is Static IP Address.
Dynamic DNS The domain name of the remote peer. This option is only available when the
Remote Gateway is Dynamic DNS.
Interface The interface through which remote peers or dialup clients connect to the
FortiGate. This option is only available in NAT mode.
By default, the local VPN gateway IP address is the IP address of the
interface that was selected (Primary IP in the Local Gateway field).
Local Gateway IP address for the local end of the VPN tunnel (Primary IP is used by default):
l Secondary IP: secondary address of the interface selected in the
Interface field.
l Specify: manually enter an address.
Interface mode cannot be configured in a transparent mode VDOM.
Mode Config This option is only available when the Remote Gateway is Dialup User.
Configure the client IP address range, subnet mask/prefix length,
DNS server, and split tunnel capability to automate remote client addressing.
NAT Traversal This option is only available when the Remote Gateway is Static IP Address
or Dynamic DNS.
ESP (encapsulating security payload), the protocol for encrypting data in the
VPN session, uses IP protocol 50 by default. However, it does not use any
port numbers so when traversing a NAT device, the packets cannot be
demultiplexed. Enabling NAT traversal encapsulates the ESP packet inside a
UDP packet, thereby adding a unique source port to the packet. This allows
the NAT device to map the packets to the correct session.
l Enable: a NAT device exists between the local FortiGate and the VPN
FortiOS 6.4.2 Administration Guide 1176
Fortinet Inc.
VPN
peer or client. Outbound encrypted packets are wrapped inside a UDP
IP header that contains a port number. The local FortiGate and the VPN
peer or client must have the same NAT traversal setting (both selected
or both cleared) to connect reliably. When in doubt, enable
NAT traversal.
l Disable: disable the NAT traversal setting.
l Forced: the FortiGate will use a port value of zero when constructing the
NAT discovery hash for the peer. This causes the peer to think it is
behind a NAT device, and it will use UDP encapsulation for IPsec, even
if no NAT is present. This approach maintains interoperability with any
IPsec implementation that supports the NAT-T RFC.
Keepalive Keepalive frequency setting. This option is only available when
Frequency NAT Traversal is set to Enable or Forced. The NAT device between the VPN
peers may remove the session when the VPN connection remains idle for too
long.
The value represents an interval in seconds where the connection will be
maintained with periodic keepalive packets. The keepalive interval must be
smaller than the session lifetime value used by the NAT device.
The keepalive packet is a 138-byte ISAKMP exchange.
Dead Peer Reestablishes VPN tunnels on idle connections and cleans up dead IKE
Detection peers if required. This feature minimizes the traffic required to check if a VPN
peer is available or unavailable (dead). The available options are:
l Disable: disable dead peer detection (DPD).
l On Idle: triggers DPD when IPsec is idle.
l On Demand: Passively sends DPD to reduce load on the firewall. Only
triggers DPD when IPsec outbound packets are sent, but no reply is
received from the peer. When there is no traffic and the last DPD-ACK
has been received, IKE will not send DPDs periodically.
Notifications are received whenever a tunnel goes up or down, or to keep the
tunnel connection open when no traffic is being generated inside the tunnel.
For example, in scenarios where a dialup client or dynamic DNS peer
connects from an IP address that changes periodically, traffic may be
suspended while the IP address changes.
When Dead Peer Detection is selected, optionally specify a retry count and a
retry interval using dpd-retrycount and dpd-retryinterval. See
Dead peer detection on page 1181.
Forward Error Enable on both ends of the tunnel to correct errors in data transmission by
Correction sending redundant data across the VPN.
Device creation Advanced option. When enabled, a dynamic interface (network device) is
created for each dialup tunnel. See Dynamic tunnel interface creation on
page 1188.
Aggregate member Advanced option. When enabled, the tunnel can be used as an aggregate
member candidate.
Authentication
FortiOS 6.4.2 Administration Guide 1177
Fortinet Inc.
VPN
Method Either Pre-shared Key or Signature.
Pre-shared Key The pre-shared key that the FortiGate will use to authenticate itself to the
remote peer or dialup client during phase 1 negotiations. The same key must
be defined at the remote peer or client. See Pre-shared key.
Certificate Name The server certificate that the FortiGate will use to authenticate itself to the
remote peer or dialup client during phase 1 negotiations. See Digital
certificates.
IKE Version Either 1 or 2. See Choosing IKE version 1 and 2 on page 1183.
Mode This option is only available when IKEv1 is selected. The two available
options are:
l Aggressive: the phase 1 parameters are exchanged in a single message
with unencrypted authentication information.
l Main (ID protection): the phase 1 parameters are exchanged in multiple
rounds with encrypted authentication information.
When the remote VPN peer has a dynamic IP address and is authenticated
by a pre-shared key, you must select Aggressive mode if there is more than
one dialup phase 1 configuration for the interface IP address.
When the remote VPN peer has a dynamic IP address and is authenticated
by a certificate, you must select Aggressive mode if there is more than one
phase 1 configuration for the interface IP address and these phase 1
configurations use different proposals.
Peer Options Options to authenticate VPN peers or clients depending on the Remote
Gateway and Authentication Method settings.
Any peer ID Accepts the local ID of any remote VPN peer or client. The FortiGate does
not check identifiers (local IDs). Mode can be set to Aggressive or Main.
This option can be used with digital certificate authentication, but for higher
security, use Peer certificate.
Specific peer ID This option is only available when Aggressive Mode is enabled. Enter the
identifier that is used to authenticate the remote peer. The identifier must
match the local ID configured by the remote peer’s administrator.
If the remote peer is a FortiGate, the identifier is specified in the Local ID field
of the Phase 1 Proposal settings.
If the remote peer is a FortiClient user, the identifier is specified in the Local
ID field.
In circumstances where multiple remote dialup VPN tunnels exist, each
tunnel must have a peer ID set.
Peer certificate Define the CA certificate used to authenticate the remote peer when the
authentication mode is Signature.
If the FortiGate will act as a VPN client, and you are using security certificates
for authentication, set the Local ID to the distinguished name (DN) of the
local server certificate that the FortiGate unit will use for authentication
purposes.
FortiOS 6.4.2 Administration Guide 1178
Fortinet Inc.
VPN
Peer ID from dialup Authenticate multiple FortiGate or FortiClient dialup clients that use unique
group identifiers and unique pre-shared keys (or unique pre-shared keys only)
through the same VPN tunnel.
You must create a dialup user group for authentication purposes. Select the
group from the list next to the Peer ID from dialup group option.
You must set Mode to Aggressive when the dialup clients use unique
identifiers and unique pre-shared keys. If the dialup clients use unique pre-
shared keys only, you can set Mode to Main if there is only one dialup Phase
1 configuration for this interface IP address.
Phase 1 Proposal The encryption and authentication algorithms used to generate keys for the
IKE SA.
There must be a minimum of one combination. The remote peer or client
must be configured to use at least one of the proposals that you define.
Encryption The following symmetric-key encryption algorithms are available:
l DES: Digital Encryption Standard, a 64-bit block algorithm that uses a
56-bit key.
l 3DES: triple-DES; plain text is encrypted three times by three keys.
l AES128: Advanced Encryption Standard, a 128-bit block algorithm that
uses a 128-bit key.
l AES128GCM: AES in Galois/Counter Mode, a 128-bit block algorithm
that uses a 128-bit key. Only available for IKEv2.
l AES192: a 128-bit block algorithm that uses a 192-bit key.
l AES256: a 128-bit block algorithm that uses a 256-bit key.
l AES256GCM: AES in Galois/Counter Mode, a 128-bit block algorithm
that uses a 256-bit key. Only available for IKEv2.
l CHACHA20POLY1305: a 128-bit block algorithm that uses a 128-bit key
and a symmetric cipher. Only available for IKEv2. See also HMAC
settings.
Authentication The following message digests that check the message authenticity during
an encrypted session are available:
l MD5: message digest 5.
l SHA1: secure hash algorithm 1; a 160-bit message digest.
l SHA256: a 256-bit message digest.
l SHA384: a 384-bit message digest.
l SHA512: a 512-bit message digest.
In IKEv2, encryption algorithms include authentication, but a PRF (pseudo
random function) is still required (PRFSHA1, PRFSHA256, PRFSHA384,
PRFSHA512). See also HMAC settings.
Diffie-Hellman Asymmetric key algorithms used for public key cryptography.
Groups Select one or more from groups 1, 2, 5, and 14 through 32. At least one of the
Diffie-Hellman Groups (DH) settings on the remote peer or client must match
one the selections on the FortiGate. Failure to match one or more DH groups
will result in failed negotiations.
FortiOS 6.4.2 Administration Guide 1179
Fortinet Inc.
VPN
Key Lifetime The time (in seconds) that must pass before the IKE encryption key expires.
When the key expires, a new key is generated without interrupting service.
The keylife can be from 120 to 172 800 seconds.
Local ID Optional setting. This value must match the peer ID value given for the
remote VPN peer’s Peer Options.
l If the FortiGate will act as a VPN client and you are using peer IDs for
authentication purposes, enter the identifier that the FortiGate will
supply to the VPN server during the phase 1 exchange.
l If the FortiGate will act as a VPN client and you are using security
certificates for authentication, select the distinguished name (DN) of the
local server certificate that the FortiGate will use for authentication
purposes.
XAUTH This option supports the authentication of dialup clients. It is only available for
IKE version 1.
l Disable: do not use XAuth.
l Client: available only if the Remote Gateway is set to Static IP Address
or Dynamic DNS. If the FortiGate is a dialup client, enter the user name
and password for the FortiGate to authenticate itself to the remote XAuth
server.
l PAP Server, CHAP Server, Auto Server: available only if Remote
Gateway is set to Dialup User. Dialup clients authenticate as members
of a dialup user group. A user group must be created first for the dialup
clients that need access to the network behind the FortiGate.
The FortiGate must be configured to forward authentication requests to
an external RADIUS or LDAP authentication server.
Select the server type based on the encryption method used between
the FortiGate, the XAuth client, and the external authentication server.
Then select the user group (Inherit from policy or Choose). See Using
XAuth authentication on page 1186.
Username User name used for authentication.
Password Password used for authentication.
Additional CLI configurations
The following phase 1 settings can be configured in the CLI:
VXLAN over IPsec Packets with a VXLAN header are encapsulated within IPsec tunnel mode.
To configure VXLAN over IPsec:
config vpn ipsec phase1-interface/phase1
edit ipsec
set interface <name>
set encapsulation vxlan/gre
set encapsulation-address ike/ipv4/ipv6
set encap-local-gw4 xxx.xxx.xxx.xxx
FortiOS 6.4.2 Administration Guide 1180
Fortinet Inc.
VPN
set encap-remote-gw xxx.xxx.xxx.xxx
next
end
IPsec tunnel idle timer Define an idle timer for IPsec tunnels. When no traffic has passed through the
tunnel for the configured idle-timeout value, the IPsec tunnel will be flushed.
To configure IPsec tunnel idle timeout:
config vpn ipsec phase1-interface
edit p1
set idle-timeout [enable | disable]
set idle-timeoutinterval <integer> IPsec tunnel idle
timeout in minutes (10 - 43200).
next
end
Monitor tunnel for failover Monitor a site-to-site tunnel to guarantee operational continuity if the primary
tunnel fails. Configure the secondary phase 1 interface to monitor the primary
interface.
To configure the monitor:
config vpn ipsec phase1-interface
edit <secondary phase1-interface>
set monitor <primary phase1-interface>
next
end
Passive mode Passive mode turns one side of the tunnel to be a responder only. It does not
initiate VPN tunnels either by auto-negotiation, rekey, or traffic initiated behind the
FortiGate.
To configure passive mode:
config vpn ipsec phase1-interface
edit <example>
set rekey {enable | disable}
set passive-mode {enable | disable}
set passive-tunnel-interface {enable | disable}
next
end
Dead peer detection
By default, dead peer detection (DPD) sends probe messages every five seconds. If you are experiencing high network
traffic, you can experiment with increasing the ping interval. However, longer intervals will require more traffic to detect
dead peers, which will result in more traffic.
FortiOS 6.4.2 Administration Guide 1181
Fortinet Inc.
VPN
In a dynamic (dialup) connection, the On Idle option encourages dialup server configurations
to more proactively delete tunnels if the peer is unavailable.
In the GUI, the dead peer detection option can be configured in the GUI when defining phase 1 options. The following
CLI commands support additional options for specifying a retry count and a retry interval.
For example, enter the following to configure DPD on the existing IPsec phase 1 configuration to use 15-second intervals
and to wait for three missed attempts before declaring the peer dead and taking action.
To configure DPD:
config vpn ipsec phase1-interface
edit <value>
set dpd [disable | on-idle | on-demand]
set dpd-retryinveral 15
set dpd-retrycount 3
next
end
DPD scalability
On a dialup server, if many VPN connections are idle, the increased DPD exchange could negatively impact the
performance/load of the daemon. The on-demand option in the CLI triggers DPD when IPsec traffic is sent, but no reply
is received from the peer.
When there is no traffic and the last DPD-ACK had been received, IKE will not send DPDs periodically. IKE will only send
out DPDs if there are outgoing packets to send, but no inbound packets have since been received.
HMAC settings
The FortiGate uses the HMAC based on the authentication proposal that is chosen in phase 1 or phase 2 of the IPsec
configuration. Each proposal consists of the encryption-hash pair (such as 3des-sha256). The FortiGate matches the
most secure proposal to negotiate with the peer.
To view the chosen proposal and the HMAC hash used:
# diagnose vpn ike gateway list
vd: root/0
name: MPLS
version: 1
interface: port1 3
addr: 192.168.2.5:500 -> 10.10.10.1:500
virtual-interface-addr: 172.31.0.2 -> 172.31.0.1
created: 1015820s ago
IKE SA: created 1/13 established 1/13 time 10/1626/21010 ms
IPsec SA: created 1/24 established 1/24 time 0/11/30 ms
id/spi: 124 43b087dae99f7733/6a8473e58cd8990a
direction: responder
status: established 68693-68693s ago = 10ms
proposal: 3des-sha256
FortiOS 6.4.2 Administration Guide 1182
Fortinet Inc.
VPN
key: e0fa6ab8dc509b33-aa2cc549999b1823-c3cb9c337432646e
lifetime/rekey: 86400/17436
DPD sent/recv: 000001e1/00000000
Choosing IKE version 1 and 2
If you create a route-based VPN, you have the option of selecting IKE version 2. Otherwise, IKE version 1 is used.
IKEv2, defined in RFC 4306, simplifies the negotiation process that creates the security association (SA).
If you select IKEv2:
l There is no choice in phase 1 of aggressive or main mode.
l Extended authentication (XAUTH) is not available.
l You can utilize EAP and MOBIKE.
Repeated authentication in IKEv2
This feature provides the option to control whether a device requires its peer to re-authenticate or whether re-key is
sufficient. It does not influence the re-authentication or re-key behavior of the device itself, which is controlled by the peer
(the default being to re-key). This solution is in response to RFC 4478. As described by the IETF, "the purpose of this is
to limit the time that security associations (SAs) can be used by a third party who has gained control of the IPsec peer".
To configure IKE SA re-authentication:
config vpn ipsec phase1-interface
edit p1
set reauth [enable | disable]
next
end
IKEv2 quick crash detection
There is support for IKEv2 quick crash detection (QCD) as described in RFC 6290.
RFC 6290 describes a method in which an IKE peer can quickly detect that the gateway peer it has and established an
IKE session with has rebooted, crashed, or otherwise lost IKE state. When the gateway receives IKE messages or ESP
packets with unknown IKE or IPsec SPIs, the IKEv2 protocol allows the gateway to send the peer an unprotected IKE
message containing INVALID_IKE_SPI or INVALID_SPI notification payloads.
RFC 6290 introduces the concept of a QCD token, which is generated from the IKE SPIs and a private QCD secret, and
exchanged between peers during the protected IKE AUTH exchange.
To configure QCD:
config system settings
set ike-quick-crash-detect [enable | disable]
end
IKEv1 quick crash detection
Based on the IKEv2 QCD feature previously described, IKEv1 QCD is implemented using a new IKE vendor ID (Fortinet
Quick Crash Detection) so both endpoints must be FortiGates. The QCD token is sent in the phase 1 exchange and must
be encrypted, so this is only implemented for IKEv1 in main mode (aggressive mode is not supported as there is no
available AUTH message to include the token). Otherwise, the feature works the same as in IKEv2 (RFC 6290).
FortiOS 6.4.2 Administration Guide 1183
Fortinet Inc.
VPN
IKEv1 fragmentation
UDP fragmentation can cause issues in IPsec when either the ISP or perimeter firewall(s) cannot pass or fragment the
oversized UDP packets that occur when using a very large public security key (PSK). The result is that IPsec tunnels do
not come up. The solution is IKE fragmentation.
For most configurations, enabling IKE fragmentation allows connections to automatically establish when they otherwise
might have failed due to intermediate nodes dropping IKE messages containing large certificates, which typically push
the packet size over 1500 bytes.
FortiOS will fragment a packet on sending if only all the following are true:
l Phase 1 contains set fragmentation enable.
l The packet is larger than the minimum MTU (576 for IPv4, 1280 for IPv6).
l The packet is being re-transmitted.
By default, IKE fragmentation is enabled.
To configure IKEv1 fragmentation:
config vpn ipsec phase1-interface
edit 1
set fragmentation [enable | disable]
next
end
IKEv2 fragmentation
RFC 7383 requires each fragment to be individually encrypted and authenticated. With IKEv2, a copy of the unencrypted
payloads around for each outgoing packet would need to be kept in case the original single packet was never answered
and would retry with fragments. With the following implementation, if the IKE payloads are greater than a configured
threshold, the IKE packets are preemptively fragmented and encrypted.
To configure IKEv2 fragmentation:
config vpn ipsec phase1-interface
edit ike
set ike-version 2
set fragmentation [enable|disable]
set fragmentation-mtu [500-16000]
next
end
Pre-shared key vs digital certificates
A FortiGate can authenticate itself to remote peers or dialup clients using either a pre-shared key or a digital certificate.
Pre-shared key
Using a pre-shared key is less secure than using certificates, especially if it is used alone, without requiring peer IDs or
extended authentication (XAuth). There also needs to be a secure way to distribute the pre-shared key to the peers.
FortiOS 6.4.2 Administration Guide 1184
Fortinet Inc.
VPN
If you use pre-shared key authentication alone, all remote peers and dialup clients must be configured with the same
pre-shared key. Optionally, you can configure remote peers and dialup clients with unique pre-shared keys. On the
FortiGate, these are configured in user accounts, not in the phase 1 settings.
The pre-shared key must contain at least six printable characters and should be known by network administrators. For
optimum protection against currently known attacks, the key must consist of a minimum of 16 randomly chosen
alphanumeric characters. The limit is 128 characters.
If you authenticate the FortiGate using a pre-shared key, you can require remote peers or dialup clients to authenticate
using peer IDs, but not client certificates.
To authenticate the FortiGate using a pre-shared key:
1. Go to VPN > IPsec Tunnels and create a new tunnel, or edit an existing one.
2. Configure or edit the Network section as needed.
3. Configure or edit the Authentication settings as follows:
Method Pre-shared Key
Pre-shared Key <string>
IKE Version 1 or 2
Mode Aggressive or Main
Peer Options Select an Accept Type and the corresponding peer. Options vary based on the
Remote Gateway and Authentication Method settings in the Network section.
Peer Options are only available in Aggressive mode.
4. For the Phase 1 Proposal section, keep the default settings unless changes are needed to meet your requirements.
5. Optionally, for authentication parameters for a dialup user group, define XAUTH parameters.
6. Click OK.
Digital certificates
To authenticate the FortiGate using digital certificates, you must have the required certificates installed on the remote
peer and on the FortiGate. The signed server certificate on one peer is validated by the presence of the root certificate
installed on the other peer. If you use certificates to authenticate the FortiGate, you can also require the remote peers or
dialup clients to authenticate using certificates. See Site-to-site VPN with digital certificate on page 1204 for a detailed
example.
To authenticate the FortiGate using a digital certificate:
1. Go to VPN > IPsec Tunnels and create a new tunnel, or edit an existing one.
2. Configure or edit the Network section as needed.
3. Configure or edit the Authentication settings as follows:
Method Signature
Certificate Name Select the certificate used to identify this FortiGate. If there are no imported
certificates, use Fortinet_Factory.
IKE Version 1 or 2
FortiOS 6.4.2 Administration Guide 1185
Fortinet Inc.
VPN
Mode Aggressive is recommended.
Peer Options For Accept Type, select Peer certificate and select the peer and the CA
certificate used to authenticate the peer. If the other end is using the Fortinet_
Factory certificate, then use the Fortinet_CA certificate here.
4. For the Phase 1 Proposal section, keep the default settings unless changes are needed to meet your requirements.
5. Optionally, for authentication parameters for a dialup user group, define XAUTH parameters.
6. Click OK.
Using XAuth authentication
Extended authentication (XAuth) increases security by requiring remote dialup client users to authenticate in a separate
exchange at the end of phase 1. XAuth draws on existing FortiGate user group definitions and uses established
authentication mechanisms such as PAP, CHAP, RADIUS, and LDAP to authenticate dialup clients. You can configure a
FortiGate to function either as an XAuth server or client. If the server or client is attempting a connection using XAuth and
the other end is not using XAuth, the failed connection attempts that are logged will not specify XAuth as the reason.
XAuth server
A FortiGate can act as an XAuth server for dialup clients. When the phase 1 negotiation completes, the FortiGate
challenges the user for a user name and password. It then forwards the user’s credentials to an external RADIUS or
LDAP server for verification.
If the user records on the RADIUS server have suitably configured Framed-IP-Address fields, you can assign client
virtual IP addresses by XAuth instead of from a DHCP address range.
The authentication protocol you use for XAuth depends on the capabilities of the authentication server and the XAuth
client:
l Select PAP Server whenever possible.
l You must select PAP Server for all implementations of LDAP and some implementations of Microsoft RADIUS.
l Select Auto Server when the authentication server supports CHAP Server but the XAuth client does not. The
FortiGate will use PAP to communicate with the XAuth client and CHAP to communicate with the authentication
server. You can also use Auto Server to allow multiple source interfaces to be defined in an IPsec/IKE policy.
Before you begin, create user accounts and user groups to identify the dialup clients that need to access the network
behind the FortiGate dialup server. If password protection will be provided through an external RADIUS or LDAP server,
you must configure the FortiGate dialup server to forward authentication requests to the authentication server.
To configure XAuth to authenticate a dialup user group:
1. On the FortiGate dialup server, go to VPN > IPsec Tunnels and create a new tunnel, or edit an existing one.
2. Configure or edit the Network, Authentication, and Phase 1 Proposal sections as needed.
3. In the XAUTH section, select the encryption method Type to use between the XAuth client, the FortiGate, and the
authentication server.
4. For User Group:
a. Click Inherit from policy for multiple user groups defined in the IPsec/IKE policy, or
b. Click Choose and in the dropdown, select the user group that needs to access the private network behind the
FortiGate.
FortiOS 6.4.2 Administration Guide 1186
Fortinet Inc.
VPN
Only one user group may be defined for Auto Server.
5. Click OK.
6. Create as many policies as needed, specifying the source user(s) and destination address.
XAuth client
If the FortiGate acts as a dialup client, the remote peer, acting as an XAuth server, might require a username and
password. You can configure the FortiGate as an XAuth client with its own username and password, which it provides
when challenged.
To configure the FortiGate dialup client as an XAuth client:
1. On the FortiGate dialup client, go to VPN > IPsec Tunnels and create a new tunnel, or edit an existing one.
2. Configure or edit the Network, Authentication, and Phase 1 Proposal sections as needed.
3. In the XAUTH section, for Type, select Client.
4. For Username, enter the FortiGate PAP, CHAP, RADIUS, or LDAP user name that the FortiGate XAuth server will
compare to its records when the FortiGate XAuth client attempts to connect.
5. Enter the Password for the user name.
6. Click OK.
Dynamic IPsec route control
You can add a route to a peer destination selector by using the add-route option, which is available for all dynamic
IPsec phases 1 and 2, for both policy-based and route-based IPsec VPNs.
The add-route option adds a route to the FortiGate routing information base when the dynamic tunnel is negotiated.
You can use the distance and priority options to set the distance and priority of this route. If this results in a route with the
lowest distance, it is added to the FortiGate forwarding information base.
You can also enable add-route in any policy-based or route-based phase 2 configuration that is associated with a
dynamic (dialup) phase 1. In phase 2, add-route can be enabled, disabled, or set to use the same route as phase 1.
The add-route option is enabled by default.
To configure add-route in phase 1:
config vpn ipsec
edit <name>
set type dynamic
set add-route {enable | disable}
next
end
To configure add-route in phase 2:
config vpn ipsec {phase2 | phase2-interface}
edit <name>
set add-route {phase1 | enable | disable}
FortiOS 6.4.2 Administration Guide 1187
Fortinet Inc.
VPN
next
end
Blocking IPsec SA negotiation
For interface-based IPsec, IPsec SA negotiation blocking can only be removed if the peer offers a wildcard selector. If a
wildcard selector is offered, then the wildcard route will be added to the routing table with the distance/priority value
configured in phase 1. If that is the route with the lowest distance, it will be installed into the forwarding information base.
In this scenario, it is important to ensure that the distance value configured for phase 1 is set appropriately.
Dynamic tunnel interface creation
When configuring route-based IPsec dialup tunnels, the net-device setting controls how traffic is routed on the hub:
config vpn ipsec phase1-interface
edit "Spoke"
set type dynamic
set net-device {disable | enable}
set tunnel-search {selectors | nexthop}
next
end
The key settings are net-device and tunnel-search. When net-device is disabled, all dialup tunnels share an
interface on the hub. The tunnel selection process is based on the tunnel search method. Using a shared interface
eliminates the time needed for dynamic interface creation and tear-down. When net-device is enabled, dynamic
interfaces are created on the hub for each dialup tunnel. This means that potentially many dynamic interfaces could be
created at start-up in a large scale deployment.
Behavior with net-device disabled
After a successful dial-in negotiation, the following occurs on the hub:
1. A dialup tunnel is created for each successful dial-in.
2. The tunnel name takes the form of <phase1Name_index>.
a. For example, the first dialup tunnel to connect is Spoke_1, the second is Spoke_2, and so on.
To view the tunnel name and the phase 1 parent:
Hub # diagnose vpn tunnel list name Spoke_3
list ipsec tunnel by names in vd 0
------------------------------------------------------
name=Spoke_3 ver=1 serial=8 198.51.100.1:0->198.51.100.4:0
bound_if=4 lgwy=static/1 tun=intf/0 mode=dial_inst/3 encap=none/320 options
[0140]=search-nexthop rgwy_chg parent=Spoke index=3
3. No dynamic interface is created.
4. The networks accessible over dialup tunnels are all bound to the same shared phase 1 interface.
a. To view the routing table:
Hub # get router info routing-table bgp
Routing table for VRF=0
B 192.168.2.0/24 [200/0] via 10.10.10.2, Spoke, 01:04:49
B 192.168.3.0/24 [200/0] via 10.10.10.3, Spoke, 01:04:47
B 192.168.4.0/24 [200/0] via 10.10.10.4, Spoke, 00:35:01
B 192.168.5.0/24 [200/0] via 10.10.10.5, Spoke, 01:04:51
FortiOS 6.4.2 Administration Guide 1188
Fortinet Inc.
VPN
When forwarding a packet to the spoke shared interface:
1. The cleartext packet is first sent to the IPsec engine.
2. The IPsec engine finds which tunnel's IPsec security association (SA) is used for protecting this packet.
3. The search logic is based on set tunnel-search {selectors | nexthop}.
Tunnel search selectors
This is the default setting, which dictates that IPsec routes are learned from the traffic selectors of the IPsec SA
negotiation. These routes are also called IKE routes, and can be displayed using diagnose vpn ike routes list.
Tunnel search next hop
This setting is used when you want IPsec routes to be learned from a dynamic routing protocol. The IPsec engine checks
the search method associated with the shared interface spoke, and searches the tunnel index associated with the next
hop. In this example, while searching for the index associated with next hop 10.10.10.4, index 3 is found corresponding
to the Spoke_3 tunnel.
Hub # diagnose vpn tunnel list name Spoke
list ipsec tunnel by names in vd 0
------------------------------------------------------
name=Spoke ver=1 serial=1 198.51.100.1:0->0.0.0.0:0
bound_if=4 lgwy=static/1 tun=intf/0 mode=dialup/2 encap=none/64 options[0040]=search-nexthop
proxyid_num=0 child_num=4 refcnt=26 ilast=4159 olast=4159 ad=/0 itn-status=7b
stat: rxp=0 txp=0 rxb=0 txb=0
dpd: mode=on-demand on=0 idle=20000ms retry=3 count=0 seqno=0
natt: mode=none draft=0 interval=0 remote_port=0
run_tally=4
ipv4 route tree:
10.10.10.2 2
10.10.10.3 0
10.10.10.4 3
10.10.10.5 1
198.51.100.2 2
198.51.100.3 0
198.51.100.4 3
198.51.100.5 1
Behavior with net-device enabled
After a successful dial-in negotiation, the following occurs on the hub:
1. A dialup tunnel is created for each successful dial-in.
2. The tunnel name takes the form of <phase1Name_index>.
a. For example, the first dialup tunnel to connect is Spoke_1, the second is Spoke_2, and so on.
To view the tunnel name and the phase 1 parent:
Hub # diagnose vpn tunnel list name Spoke_3
list ipsec tunnel by names in vd 0
------------------------------------------------------
name=Spoke_3 ver=1 serial=6 198.51.100.1:0->198.51.100.4:0
bound_if=4 lgwy=static/1 tun=intf/0 mode=dial_inst/3 encap=none/0 parent=Spoke
index=3
FortiOS 6.4.2 Administration Guide 1189
Fortinet Inc.
VPN
3. A dynamic interface is created for each dialup tunnel.
a. To view the interface list:
Hub # diagnose netlink interface list | grep "Spoke_"
if=Spoke_0 family=00 type=768 index=22 mtu=1438 link=16 master=0
if=Spoke_1 family=00 type=768 index=23 mtu=1438 link=16 master=0
if=Spoke_2 family=00 type=768 index=24 mtu=1438 link=16 master=0
if=Spoke_3 family=00 type=768 index=26 mtu=1438 link=16 master=0
4. The networks accessible over dialup tunnels are bound to the corresponding tunnel interface.
a. To view the routing table:
Hub # get router info routing-table bgp
Routing table for VRF=0
B 192.168.2.0/24 [200/0] via 10.10.10.2, Spoke_0, 01:04:49
B 192.168.3.0/24 [200/0] via 10.10.10.3, Spoke_1, 01:04:47
B 192.168.4.0/24 [200/0] via 10.10.10.4, Spoke_3, 00:35:01
B 192.168.5.0/24 [200/0] via 10.10.10.5, Spoke_2, 01:04:51
When forwarding a packet to the dialup IPsec interface:
1. The cleartext packet sent to the dynamic interface is sent to the IPsec engine.
2. The IPsec engine protects the cleartext packets with the IPsec security association (SA) of the corresponding
tunnel.
3. The ESP packet is then sent on the wire.
Phase 2 configuration
After phase 1 negotiations end successfully, phase 2 begins. In Phase 2, the VPN peer or client and the FortiGate
exchange keys again to establish a secure communication channel. The phase 2 proposal parameters select the
encryption and authentication algorithms needed to generate keys for protecting the implementation details of security
associations (SAs). The keys are generated automatically using a Diffie-Hellman algorithm.
The basic phase 2 settings associate IPsec phase 2 parameters with the phase 1 configuration that specifies the remote
end point of the VPN tunnel. In most cases, you need to configure only basic Phase 2 settings.
Some settings can be configured in the CLI. The following options are available in the VPN Creation Wizard after the
tunnel is created:
New Phase 2
Name Phase 2 definition name.
Local Address A value of 0.0.0.0/0 means all IP addresses behind the local VPN peer.
Add a specific address or range to allow traffic from and to only this local
address.
See Quick mode selectors on page 1192.
Remote Address Enter the destination IP address that corresponds to the recipients or network
behind the remote VPN peer. A value of 0.0.0.0/0 means all IP addresses
behind the remote VPN peer.
See Quick mode selectors on page 1192.
FortiOS 6.4.2 Administration Guide 1190
Fortinet Inc.
VPN
Advanced Select the encryption and authentication algorithms that will be proposed to
the remote VPN peer. To establish a VPN connection, at least one of the
proposals specified must match the configuration on the remote peer.
Encryption The following symmetric-key encryption algorithms are available:
l NULL: do not use an encryption algorithm.
l DES: Digital Encryption Standard, a 64-bit block algorithm that uses a
56-bit key.
l 3DES: triple-DES; plain text is encrypted three times by three keys.
l AES128: Advanced Encryption Standard, a 128-bit block algorithm that
uses a 128-bit key.
l AES128GCM: AES in Galois/Counter Mode, a 128-bit block algorithm
that uses a 128-bit key. Only available for IKEv2.
l AES192: a 128-bit block algorithm that uses a 192-bit key.
l AES256: a 128-bit block algorithm that uses a 256-bit key.
l AES256GCM: AES in Galois/Counter Mode, a 128-bit block algorithm
that uses a 256-bit key. Only available for IKEv2.
l CHACHA20POLY1305: a 128-bit block algorithm that uses a 128-bit key
and a symmetric cipher. Only available for IKEv2.
See ChaCha20 and Poly1305 AEAD cipher on page 1194, AES-GCM for
IKEv2 phase 1 on page 1194, and HMAC settings.
Authentication The following message digests that check the message authenticity during an
encrypted session are available:
l NULL: do not use a message digest.
l MD5: message digest 5.
l SHA1: secure hash algorithm 1; a 160-bit message digest.
l SHA256: a 256-bit message digest.
l SHA384: a 384-bit message digest.
l SHA512: a 512-bit message digest.
See also HMAC settings.
Enable Replay Replay attacks occur when an unauthorized party intercepts a series of IPsec
Detection packets and replays them back into the tunnel.
Replay detection allows the FortiGate to check all IPsec packets to see if they
have been received before. If any encrypted packets arrive out of order, the
FortiGate discards them.
Note that 64-bit extended sequence numbers (as described in RFC 4303,
RFC 4304 as an addition to IKEv1, and RFC 5996 for IKEv2) are supported
for IPsec when replay detection is enabled.
Enable Perfect Perfect forward secrecy (PFS) improves security by forcing a new
Forward Secrecy Diffie-Hellman exchange whenever keylife expires.
(PFS)
Diffie-Hellman Asymmetric key algorithms used for public key cryptography.
Group
FortiOS 6.4.2 Administration Guide 1191
Fortinet Inc.
VPN
Select one or more from groups 1, 2, 5, and 14 through 32. At least one of the
Diffie-Hellman Groups (DH) settings on the remote peer or client must match
one the selections on the FortiGate. Failure to match one or more DH groups
will result in failed negotiations.
Local Port Enter the port number that the local VPN peer uses to transport traffic related
to the specified service (protocol number). The range is from 0 to 65535. To
specify all ports, select All, or enter 0.
Remote Port Enter the port number that the remote VPN peer uses to transport traffic
related to the specified service (protocol number). To specify all ports, select
All, or enter 0.
Protocol Enter the IP protocol number of the service. To specify all services, select All,
or enter 0.
Auto-negotiate Select this option for the tunnel to be automatically renegotiated when the it
expires. See Auto-negotiate on page 1193.
Autokey Keep Select this option for the tunnel to remain active when no data is being
Alive processed.
Key Lifetime Select the method for determining when the phase 2 key expires:
l Seconds
l Kilobytes
l Both
Enter a corresponding value for Seconds and/or Kilobytes in the text boxes.
If Both is selected, the key expires when either the time has passed or the
number of kilobytes have been processed.
Quick mode selectors
Quick mode selectors determine which IP addresses can perform IKE negotiations to establish a tunnel. By only allowing
authorized IP addresses access to the VPN tunnel, the network is more secure.
The default settings are as broad as possible: any IP address or configured address object using any protocol on any
port.
While the dropdown menus for specifying an address also show address groups, the use of
address groups may not be supported on a remote endpoint device that is not a FortiGate.
When configuring a quick mode selector for Local Address and Remote Address, valid options include IPv4 and IPv6
single addresses, subnets, or ranges.
There are some configurations that require specific selectors:
l The VPN peer is a third-party device that uses specific phase2 selectors.
l The FortiGate connects as a dialup client to another FortiGate, in which case (usually) you must specify a local IP
address, IP address range, or subnet. However, this is not required if you are using dynamic routing and mode-cfg.
With FortiOS VPNs, your network has multiple layers of security, with quick mode selectors being an important line of
defense:
FortiOS 6.4.2 Administration Guide 1192
Fortinet Inc.
VPN
l Routes guide traffic from one IP address to another.
l Phase 1 and phase 2 connection settings ensure there is a valid remote end point for the VPN tunnel that agrees on
the encryption and parameters.
l Quick mode selectors allow IKE negotiations only for allowed peers.
l Security policies control which IP addresses can connect to the VPN.
l Security policies also control what protocols are allowed over the VPN along with any bandwidth limiting.
If you are editing an existing phase 2 configuration, the local address and remote address fields are unavailable if the
tunnel has been configured to use firewall addresses as selectors. This option exists only in the CLI.
Using the add-route option
Consider using the add-route option to add a route to a peer destination selector in phase 2 to automatically match the
settings in phase 1.
To configure add-route:
config vpn ipsec {phase2 | phase2-interface}
edit <name>
set add-route {phase1 | enable | disable}
next
end
Auto-negotiate
By default, the phase 2 security association (SA) is not negotiated until a peer attempts to send data. The triggering
packet and some subsequent packets are dropped until the SA is established. Applications normally resend this data, so
there is no loss, but there might be a noticeable delay in response to the user.
If the tunnel goes down, the auto-negotiate feature (when enabled) attempts to re-establish the tunnel. Auto-negotiate
initiates the phase 2 SA negotiation automatically, repeating every five seconds until the SA is established.
Automatically establishing the SA can be important for a dialup peer. It ensures that the VPN tunnel is available for peers
at the server end to initiate traffic to the dialup peer. Otherwise, the VPN tunnel does not exist until the dialup peer
initiates traffic.
To configure auto-negotiate:
config vpn ipsec phase2
edit <phase2_name>
set auto-negotiate enable
next
end
Installing dynamic selectors via auto-negotiate
The IPsec SA connect message generated is used to install dynamic selectors. These selectors can be installed via the
auto-negotiate mechanism. When phase 2 has auto-negotiate enabled, and phase 1 has mesh-selector-type
set to subnet, a new dynamic selector will be installed for each combination of source and destination subnets. Each
dynamic selector will inherit the auto-negotiate option from the template selector and begin SA negotiation. Phase 2
selector sources from dialup clients will all establish SAs without traffic being initiated from the client subnets to the hub.
FortiOS 6.4.2 Administration Guide 1193
Fortinet Inc.
VPN
DHCP
The dhcp-ipsec option lets the FortiGate assign VIP addresses to FortiClient dialup clients through a DHCP server or
relay. This option is only available if the remote gateway in the phase 1 configuration is set to dialup user, and it only
works in policy-based VPNs.
With dhcp-ipsec, the FortiGate dialup server acts as a proxy for FortiClient dialup clients that have VIP addresses on
the subnet of the private network behind the FortiGate. In this case, the FortiGate dialup server acts as a proxy on the
local private network for the FortiClient dialup client. A host on the network behind the dialup server issues an ARP
request, corresponding to the device MAC address of the FortiClient host (when a remote server sends an ARP to the
local FortiClient dialup client). The FortiGate then answers the ARP request on behalf of the FortiClient host, and then
forwards the associated traffic to the FortiClient host through the tunnel.
Acting as a proxy prevents the VIP address assigned to the FortiClient dialup client from causing possible ARP
broadcast problems—the normal and VIP addresses can confuse some network switches when two addresses have the
same MAC address.
ChaCha20 and Poly1305 AEAD cipher
In IKEv2 to support RFC 7634, the ChaCha20 and Poly1305 crypto algorithms can be used together as a combined
mode AEAD cipher (like AES-GCM) in the crypto_ftnt cipher in cipher_chacha20poly1305.c:
config vpn ipsec phase2-interface
edit <name>
set phase1name <name>
set proposal chacha20poly1305
next
end
AES-GCM for IKEv2 phase 1
In IKEv2 to support RFC 5282, the AEAD algorithm AES-GCM supports 128- and 256-bit variants:
config vpn ipsec phase2-interface
edit <name>
set phase1name <name>
set proposal [aes128gcm | aes256gcm]
next
end
VPN security policies
This section explains how to specify the source and destination IP addresses of traffic transmitted through an IPsec
VPN, and how to define appropriate security policies.
FortiOS 6.4.2 Administration Guide 1194
Fortinet Inc.
VPN
Topology
Defining policy addresses
In a gateway-to-gateway, hub-and-spoke, dynamic DNS, redundant tunnel, or transparent configuration, you need to
define a policy address for the private IP address of the network behind the remote VPN peer (for example,
192.168.10.0/255.255.255.0 or 192.168.10.0/24).
In a peer-to-peer configuration, you need to define a policy address for the private IP address of a server or host behind
the remote VPN peer (for example, 172.16.5.1/255.255.255.255, 172.16.5.1/32, or 172.16.5.1).
For a FortiGate dialup server in a dialup-client or internet-browsing configuration, the source IP should reflect the IP
addresses of the dialup clients:
Defining security policies
Policy-based and route-based VPNs require different security policies.
FortiOS 6.4.2 Administration Guide 1195
Fortinet Inc.
VPN
l A policy-based VPN requires an IPsec policy. You specify the interface to the private network, the interface to the
remote peer and the VPN tunnel. A single policy can enable traffic inbound, outbound, or in both directions.
l A route-based VPN requires an accept policy for each direction. For the source and destination interfaces, you
specify the interface to the private network and the virtual IPsec interface (phase 1 configuration) of the VPN. The
IPsec interface is the destination interface for the outbound policy and the source interface for the inbound policy.
One security policy must be configured for each direction of each VPN interface.
If the policy that grants the VPN connection is limited to certain services, DHCP must be
included, otherwise the client will not be able to retrieve a lease from the FortiGate’s (IPsec)
DHCP server because the DHCP request (coming out of the tunnel) will be blocked.
Policy-based VPN
An IPsec policy enables the transmission and reception of encrypted packets, specifies the permitted direction of VPN
traffic, and selects the VPN tunnel. In most cases, a single policy is needed to control both inbound and outbound IP
traffic through a VPN tunnel. For a detailed example, see Policy-based IPsec tunnel on page 1216. Be aware of the
following before creating an IPsec policy.
Allow traffic to be initiated from the remote site
Policies specify which IP addresses can initiate a tunnel. By default, traffic from the local private network initiates the
tunnel. When the Allow traffic to be initiated form the remote site option is selected, traffic from a dialup client, or a
computer on a remote network, initiates the tunnel. Both can be enabled at the same time for bi-directional initiation of
the tunnel.
Outbound and inbound NAT
When a FortiGate operates in NAT mode, you can enable inbound or outbound NAT. Outbound NAT may be performed
on outbound encrypted packets or IP packets in order to change their source address before they are sent through the
tunnel. Inbound NAT is performed to intercept and decrypt emerging IP packets from the tunnel.
By default, these options are not selected in security policies and can only be set through the CLI.
Defining multiple IPsec policies for the same tunnel
You must define at least one IPsec policy for each VPN tunnel. If the same remote server or client requires access to
more than one network behind a local FortiGate, the FortiGate must be configured with an IPsec policy for each network.
Multiple policies may be required to configure redundant connections to a remote destination or control access to
different services at different times.
To ensure a secure connection, the FortiGate must evaluate policies with Action set to IPsec before ACCEPT and
DENY. Because the FortiGate unit reads policies starting at the top of the list, you must move all IPsec policies to the top
of the list, and be sure to reorder your multiple IPsec policies that apply to the tunnel so that specific constraints can be
evaluated before general constraints. If you create two equivalent IPsec policies for two different tunnels, the system will
select the correct policy based on the specified source and destination addresses.
FortiOS 6.4.2 Administration Guide 1196
Fortinet Inc.
VPN
Adding multiple IPsec policies for the same VPN tunnel can cause conflicts if the policies
specify similar source and destination addresses, but have different settings for the same
service. When policies overlap in this manner, the system may apply the wrong IPsec policy or
the tunnel may fail.
Route-based VPN
When you define a route-based VPN, you create a virtual IPsec interface on the physical interface that connects to the
remote peer. You create ordinary accept policies to enable traffic between the IPsec interface and the interface that
connects to the private network. This makes configuration simpler than for policy-based VPNs.
To configure policies for a route-based VPN:
1. Go to Policy & Objects > Firewall Policy.
2. Click Create New and define an ACCEPT policy to permit communication between the local private network and the
private network behind the remote peer and enter these settings in particular:
Name Enter a name for the security policy.
Incoming Interface Select the interface that connects to the private network behind this FortiGate.
Outgoing Interface Select the IPsec interface you configured.
Source Select the address name you defined for the private network behind this
FortiGate.
Destination Select the address name you defined for the private network behind the
remote peer.
Action Select ACCEPT.
NAT Disable NAT.
3. Click OK.
To permit the remote client to initiate communication, you need to define a security policy for communication in that
direction.
4. Click Create New and enter these settings in particular:
Name Enter a name for the security policy.
Incoming Interface Select the IPsec interface you configured.
Outgoing Interface Select the interface that connects to the private network behind this FortiGate.
Source Select the address name you defined for the private network behind the
remote peer.
Destination Select the address name you defined for the private network behind this
FortiGate.
Action Select ACCEPT.
NAT Disable NAT.
5. Click OK.
FortiOS 6.4.2 Administration Guide 1197
Fortinet Inc.
VPN
Blocking unwanted IKE negotiations and ESP packets with a local-in policy
It is not unusual to receive IPsec connection attempts or malicious IKE packets from all over the internet. Malicious
parties use these probes to try to establish an IPsec tunnel in order to gain access to your private network. A good way to
prevent this is to use local-in policies to deny such traffic.
Sometimes there are malicious attempts using crafted invalid ESP packets. These invalid attempts are automatically
blocked by the FOS IPsec local-in handler when it checks the SPI value against the SAs of existing tunnels. The IPsec
local-in handler processes the packet instead of the firewall's local-in handler. So when these attempts are blocked, you
will notice an unknown SPI message in your VPN logs instead of being silently blocked by your local-in policy. These
log messages are rate limited.
Sample log and alert email
Message meets Alert condition
date=2020-08-11 time=09:28:40 devname=toSite1 devid=FGT60Fxxxxxxxxxx logid="0101037131"
type="event" subtype="vpn" level="error" vd="root" eventtime=1597163320747963100 tz="-0700"
logdesc="IPsec ESP" msg="IPsec ESP" action="error" remip=131.62.25.102 locip=192.157.116.88
remport=40601 locport=500 outintf="wan1" cookies="N/A" user="N/A" group="N/A"
xauthuser="N/A" xauthgroup="N/A" assignip=N/A vpntunnel="N/A" status="esp_error" error_
num="Received ESP packet with unknown SPI." spi="f6c9e2x1" seq="02000400"
Note that invalid SPIs may not always indicate malicious activity. For example, the SPI may not match during rekey, or
when one unit flushes its tunnel SAs. Administrators should collect as much information as possible before making a
conclusion.
To block undesirable IPsec connection attempts and IKE packets using a local-in policy:
1. Configure an address group that excludes legitimate IPs:
config firewall addrgrp
edit "All_exceptions"
set member "all"
set exclude enable
set exclude-member "remote-vpn"
next
end
2. Create a local-in policy that blocks IKE traffic from the address group:
config firewall local-in-policy
edit 1
set intf "wan1"
set srcaddr "All_exceptions"
set dstaddr "all"
set service "IKE"
set schedule "always"
next
end
The default action is deny.
FortiOS 6.4.2 Administration Guide 1198
Fortinet Inc.
VPN
3. Verify the traffic blocked by the local-in policy:
# diagnose debug flow filter dport 500
# diagnose debug flow trace start 10
# diagnose debug enable
id=20085 trace_id=290 func=print_pkt_detail line=5588 msg="vd-root:0 received a packet
(proto=17, 10.10.10.13:500->10.10.10.1:500) from wan1. "
id=20085 trace_id=290 func=init_ip_session_common line=5760 msg="allocate a new session-
003442e7"
id=20085 trace_id=290 func=vf_ip_route_input_common line=2598 msg="find a route:
flag=84000000 gw-10.10.10.1 via root"
id=20085 trace_id=290 func=fw_local_in_handler line=430 msg="iprope_in_check() check
failed on policy 1, drop"
Site-to-site VPN
A site-to-site VPN connection lets branch offices use the Internet to access the main office's intranet. A site-to-site VPN
allows offices in multiple, fixed locations to establish secure connections with each other over a public network such as
the Internet.
The following topics provide instructions on configuring basic site-to-site VPN:
l Basic site-to-site VPN with pre-shared key on page 1199
l Site-to-site VPN with digital certificate on page 1204
l GRE over IPsec on page 1211
l Policy-based IPsec tunnel on page 1216
l IKEv2 IPsec site-to-site VPN to an AWS VPN gateway on page 1222
l IPsec VPN to Azure with virtual network gateway on page 1229
l IPsec VPN to an Azure with virtual WAN on page 1239
l IPSec VPN between a FortiGate and a Cisco ASA with multiple subnets on page 1243
Basic site-to-site VPN with pre-shared key
This is a sample configuration of IPsec VPN authenticating a remote FortiGate peer with a pre-shared key.
To configure IPsec VPN authenticating a remote FortiGate peer with a pre-shared key in the GUI:
1. Configure the HQ1 FortiGate.
a. Go to VPN > IPsec Wizard and configure the following settings for VPN Setup:
i. Enter a VPN name.
ii. For Template Type, select Site to Site.
FortiOS 6.4.2 Administration Guide 1199
Fortinet Inc.
VPN
iii. For Remote Device Type, select FortiGate.
iv. For NAT Configuration, select No NAT Between Sites.
v. Click Next.
b. Configure the following settings for Authentication:
i. For Remote Device, select IP Address.
ii. For the IP address, enter 172.16.202.1.
iii. For Outgoing interface, enter port1.
iv. For Authentication Method, select Pre-shared Key.
v. In the Pre-shared Key field, enter sample as the key.
vi. Click Next.
c. Configure the following settings for Policy & Routing:
i. From the Local Interface dropdown menu, select the local interface.
ii. Configure the Local Subnets as 10.1.100.0.
iii. Configure the Remote Subnets as 172.16.101.0.
iv. Click Create.
2. Configure the HQ2 FortiGate.
a. Go to VPN > IPsec Wizard and configure the following settings for VPN Setup:
i. Enter a VPN name.
ii. For Template Type, select Site to Site.
iii. For Remote Device Type, select FortiGate.
iv. For NAT Configuration, select No NAT Between Sites.
v. Click Next.
b. Configure the following settings for Authentication:
i. For Remote Device, select IP Address.
ii. For the IP address, enter 172.16.2001.
iii. For Outgoing interface, enter port25.
iv. For Authentication Method, select Pre-shared Key.
v. In the Pre-shared Key field, enter sample as the key.
vi. Click Next.
c. Configure the following settings for Policy & Routing:
i. From the Local Interface dropdown menu, select the local interface.
ii. Configure Local Subnets as 172.16.101.0.
iii. Configure the Remote Subnets as 10.1.100.0.
iv. Click Create.
To configure IPsec VPN authenticating a remote FortiGate peer with a pre-shared key using the CLI:
1. Configure the WAN interface and default route. The WAN interface is the interface connected to the ISP. The IPsec
tunnel is established over the WAN interface.
a. Configure HQ1.
config system interface
edit "port1"
set vdom "root"
set ip 172.16.200.1 255.255.255.0
next
end
FortiOS 6.4.2 Administration Guide 1200
Fortinet Inc.
VPN
config router static
edit 1
set gateway 172.16.200.3
set device "port1"
next
end
b. Configure HQ2.
config system interface
edit "port25"
set vdom "root"
set ip 172.16.202.1 255.255.255.0
next
end
config router static
edit 1
set gateway 172.16.202.2
set device "port25"
next
end
2. Configure the internal (protected subnet) interface. The internal interface connects to the corporate internal
network. Traffic from this interface routes out the IPsec VPN tunnel.
a. Configure HQ1.
config system interface
edit "dmz"
set vdom "root"
set ip 10.1.100.1 255.255.255.0
next
end
b. Configure HQ2.
config system interface
edit "port9"
set vdom "root"
set ip 172.16.101.1 255.255.255.0
next
end
3. Configure the IPsec phase1-interface.
a. Configure HQ1.
config vpn ipsec phase1-interface
edit "to_HQ2"
set interface "port1"
set peertype any
set net-device enable
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
set remote-gw 172.16.202.1
set psksecret sample
next
end
FortiOS 6.4.2 Administration Guide 1201
Fortinet Inc.
VPN
b. Configure HQ2.
config vpn ipsec phase1-interface
edit "to_HQ1"
set interface "port25"
set peertype any
set net-device enable
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
set remote-gw 172.16.200.1
set psksecret sample
next
end
4. Configure the IPsec phase2-interface.
a. Configure HQ1.
config vpn ipsec phase2-interface
edit "to_HQ2"
set phase1name "to_HQ2"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm
aes256gcm chacha20poly1305
set auto-negotiate enable
next
end
b. Configure HQ2.
config vpn ipsec phase2-interface
edit "to_HQ2"
set phase1name "to_HQ1"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm
aes256gcm chacha20poly1305
set auto-negotiate enable
next
end
5. Configure the static routes. Two static routes are added to reach the remote protected subnet. The blackhole route
is important to ensure that IPsec traffic does not match the default route when the IPsec tunnel is down.
a. Configure HQ1.
config router static
edit 2
set dst 172.16.101.0 255.255.255.0
set device "to_HQ2"
next
edit 3
set dst 172.16.101.0 255.255.255.0
set blackhole enable
set distance 254
next
end
b. Configure HQ2.
config router static
edit 2
set dst 10.1.100.0 255.255.255.0
set device "to_HQ1"
next
FortiOS 6.4.2 Administration Guide 1202
Fortinet Inc.
VPN
edit 3
set dst 10.1.100.0 255.255.255.0
set blackhole enable
set distance 254
next
end
6. Configure two firewall policies to allow bidirectional IPsec traffic flow over the IPsec VPN tunnel.
a. Configure HQ1.
config firewall policy
edit 1
set name "inbound"
set srcintf "to_HQ2"
set dstintf "dmz"
set srcaddr "172.16.101.0"
set dstaddr "10.1.100.0"
set action accept
set schedule "always"
set service "ALL"
next
edit 2
set name "outbound"
set srcintf "dmz"
set dstintf "to_HQ2"
set srcaddr "10.1.100.0"
set dstaddr "172.16.101.0"
set action accept
set schedule "always"
set service "ALL"
next
end
b. Configure HQ2.
config firewall policy
edit 1
set name "inbound"
set srcintf "to_HQ1"
set dstintf "port9"
set srcaddr "10.1.100.0"
set dstaddr "172.16.101.0"
set action accept
set schedule "always"
set service "ALL"
next
edit 2
set name "outbound"
set srcintf "port9"
set dstintf "to_HQ1"
set srcaddr "172.16.101.0"
set dstaddr "10.1.100.0"
set action accept
set schedule "always"
set service "ALL"
next
end
FortiOS 6.4.2 Administration Guide 1203
Fortinet Inc.
VPN
7. Run diagnose commands. The diagnose debug application ike -1 command is the key to troubleshoot
why the IPsec tunnel failed to establish. If the PSK failed to match, the following error shows up in the debug output:
ike 0:to_HQ2:15037: parse error
ike 0:to_HQ2:15037: probable pre-shared secret mismatch'
The following commands are useful to check IPsec phase1/phase2 interface status.
a. Run the diagnose vpn ike gateway list command on HQ1. The system should return the following:
vd: root/0
name: to_HQ2
version: 1
interface: port1 11
addr: 172.16.200.1:500 -> 172.16.202.1:500
created: 5s ago
IKE SA: created 1/1 established 1/1 time 0/0/0 ms
IPsec SA: created 2/2 established 2/2 time 0/0/0 ms
id/spi: 12 6e8d0532e7fe8d84/3694ac323138a024
direction: responder
status: established 5-5s ago = 0ms
proposal: aes128-sha256
key: b3efb46d0d385aff-7bb9ee241362ee8d
lifetime/rekey: 86400/86124
DPD sent/recv: 00000000/00000000
b. Run the diagnose vpn tunnel list command on HQ1. The system should return the following:
list all ipsec tunnel in vd 0
name=to_HQ2 ver=1 serial=1 172.16.200.1:0->172.16.202.1:0
bound_if=11 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/528 options[0210]=create_
dev frag-rfcaccept_traffic=1
proxyid_num=1 child_num=0 refcnt=11 ilast=7 olast=87 ad=/0
stat: rxp=0 txp=0 rxb=0 txb=0
dpd: mode=on-demand on=1 idle=20000ms retry=3 count=0 seqno=0
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=to_HQ2 proto=0 sa=1 ref=2 serial=1 auto-negotiate
src: 0:0.0.0.0/0.0.0.0:0
dst: 0:0.0.0.0/0.0.0.0:0
SA: ref=3 options=18227 type=00 soft=0 mtu=1438 expire=42927/0B replaywin=2048
seqno=1 esn=0 replaywin_lastseq=00000000 itn=0
life: type=01 bytes=0/0 timeout=42930/43200
dec: spi=ef9ca700 esp=aes key=16 a2c6584bf654d4f956497b3436f1cfc7
ah=sha1 key=20 82c5e734bce81e6f18418328e2a11aeb7baa021b
enc: spi=791e898e esp=aes key=16 0dbb4588ba2665c6962491e85a4a8d5a
ah=sha1 key=20 2054b318d2568a8b12119120f20ecac97ab730b3
dec:pkts/bytes=0/0, enc:pkts/bytes=0/0
Site-to-site VPN with digital certificate
This is a sample configuration of IPsec VPN authenticating a remote FortiGate peer with a certificate. The certificate on
one peer is validated by the presence of the CA certificate installed on the other peer.
FortiOS 6.4.2 Administration Guide 1204
Fortinet Inc.
VPN
To configure IPsec VPN authenticating a remote FortiGate peer with a digital certificate in the GUI:
1. Import the certificate.
2. Configure user peers.
3. Configure the HQ1 FortiGate.
a. Go to VPN > IPsec Wizard and configure the following settings for VPN Setup:
i. Enter a VPN name.
ii. For Template Type, select Site to Site.
iii. For Remote Device Type, select FortiGate.
iv. For NAT Configuration, select No NAT Between Sites.
v. Click Next.
b. Configure the following settings for Authentication:
i. For Remote Device, select IP Address.
ii. For the IP address, enter 172.16.202.1.
iii. For Outgoing interface, enter port1.
iv. For Authentication Method, select Signature.
v. In the Certificate name field, select the imported certificate.
vi. From the Peer Certificate CA dropdown list, select the desired peer CA certificate.
vii. Click Next.
c. Configure the following settings for Policy & Routing:
i. From the Local Interface dropdown menu, select the local interface.
ii. Configure the Local Subnets as 10.1.100.0.
iii. Configure the Remote Subnets as 172.16.101.0.
iv. Click Create.
4. Configure the HQ2 FortiGate.
a. Go to VPN > IPsec Wizard and configure the following settings for VPN Setup:
i. Enter a VPN name.
ii. For Template Type, select Site to Site.
iii. For Remote Device Type, select FortiGate.
iv. For NAT Configuration, select No NAT Between Sites.
v. Click Next.
b. Configure the following settings for Authentication:
i. For Remote Device, select IP Address.
ii. For the IP address, enter 172.16.2001.
iii. For Outgoing interface, enter port25.
iv. For Authentication Method, select Signature.
v. In the Certificate name field, select the imported certificate.
FortiOS 6.4.2 Administration Guide 1205
Fortinet Inc.
VPN
vi. From the Peer Certificate CA dropdown list, select the peer CA certificate.
vii. Click Next.
c. Configure the following settings for Policy & Routing:
i. From the Local Interface dropdown menu, select the local interface.
ii. Configure Local Subnets as 172.16.101.0.
iii. Configure the Remote Subnets as 10.1.100.0.
iv. Click Create.
To configure IPsec VPN authenticating a remote FortiGate peer with a digital certificate using the CLI:
1. Configure the WAN interface and default route. The WAN interface is the interface connected to the ISP. The IPsec
tunnel is established over the WAN interface.
a. Configure HQ1.
config system interface
edit "port1"
set vdom "root"
set ip 172.16.200.1 255.255.255.0
next
end
config router static
edit 1
set gateway 172.16.200.3
set device "port1"
next
end
b. Configure HQ2.
config system interface
edit "port25"
set vdom "root"
set ip 172.16.202.1 255.255.255.0
next
end
config router static
edit 1
set gateway 172.16.202.2
set device "port25"
next
end
2. Configure the internal (protected subnet) interface. The internal interface connects to the corporate internal
network. Traffic from this interface routes out the IPsec VPN tunnel.
a. Configure HQ1.
config system interface
edit "dmz"
set vdom "root"
set ip 10.1.100.1 255.255.255.0
next
end
FortiOS 6.4.2 Administration Guide 1206
Fortinet Inc.
VPN
b. Configure HQ2.
config system interface
edit "port9"
set vdom "root"
set ip 172.16.101.1 255.255.255.0
next
end
3. Configure the import certificate and its CA certificate information. The certificate and its CA certificate must be
imported on the remote peer FortiGate and on the primary FortiGate before configuring IPsec VPN tunnels. If the
built-in Fortinet_Factory certificate and the Fortinet_CA CA certificate are used for authentication, you can skip this
step.
a. Configure HQ1.
config vpn certificate local
edit "test1"
...
set range global
next
end
config vpn certificate ca
edit "CA_Cert_1"
...
set range global
next
end
b. Configure HQ2.
config vpn certificate local
edit "test2"
...
set range global
next
end
config vpn certificate ca
edit "CA_Cert_1"
...
set range global
next
end
4. Configure the peer user. The peer user is used in the IPsec VPN tunnel peer setting to authenticate the remote peer
FortiGate.
a. If not using the built-in Fortinet_Factory certificate and Fortinet_CA CA certificate, do the following:
i. Configure HQ1.
config user peer
edit "peer1"
set ca "CA_Cert_1"
next
end
ii. Configure HQ2.
config user peer
edit "peer2"
set ca "CA_Cert_1"
FortiOS 6.4.2 Administration Guide 1207
Fortinet Inc.
VPN
next
end
b. If the built-in Fortinet_Factory certificate and Fortinet_CA CA certificate are used for authentication, the peer
user must be configured based on Fortinet_CA.
i. Configure HQ1.
config user peer
edit "peer1"
set ca "Fortinet_CA"
next
end
ii. Configure HQ2.
config user peer
edit "peer2"
set ca "Fortinet_CA"
next
end
5. Configure the IPsec phase1-interface.
a. Configure HQ1.
config vpn ipsec phase1-interface
edit "to_HQ2"
set interface "port1"
set authmethod signature
set net-device enable
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
set remote-gw 172.16.202.1
set certificate "test1"
set peer "peer1"
next
end
b. Configure HQ2.
config vpn ipsec phase1-interface
edit "to_HQ1"
set interface "port25"
set authmethod signature
set net-device enable
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
set remote-gw 172.16.200.1
set certificate "test2"
set peer "peer2"
next
end
6. Configure the IPsec phase2-interface.
a. Configure HQ1.
config vpn ipsec phase2-interface
edit "to_HQ2"
set phase1name "to_HQ2"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm
aes256gcm chacha20poly1305
set auto-negotiate enable
FortiOS 6.4.2 Administration Guide 1208
Fortinet Inc.
VPN
next
end
b. Configure HQ2.
config vpn ipsec phase2-interface
edit "to_HQ2"
set phase1name "to_HQ1"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm
aes256gcm chacha20poly1305
set auto-negotiate enable
next
end
7. Configure the static routes. Two static routes are added to reach the remote protected subnet. The blackhole route
is important to ensure that IPsec traffic does not match the default route when the IPsec tunnel is down.
a. Configure HQ1.
config router static
edit 2
set dst 172.16.101.0 255.255.255.0
set device "to_HQ2"
next
edit 3
set dst 172.16.101.0 255.255.255.0
set blackhole enable
set distance 254
next
end
b. Configure HQ2.
config router static
edit 2
set dst 10.1.100.0 255.255.255.0
set device "to_HQ1"
next
edit 3
set dst 10.1.100.0 255.255.255.0
set blackhole enable
set distance 254
next
end
8. Configure two firewall policies to allow bidirectional IPsec traffic flow over the IPsec VPN tunnel.
a. Configure HQ1.
config firewall policy
edit 1
set name "inbound"
set srcintf "to_HQ2"
set dstintf "dmz"
set srcaddr "172.16.101.0"
set dstaddr "10.1.100.0"
set action accept
set schedule "always"
set service "ALL"
next
FortiOS 6.4.2 Administration Guide 1209
Fortinet Inc.
VPN
edit 2
set name "outbound"
set srcintf "dmz"
set dstintf "to_HQ2"
set srcaddr "10.1.100.0"
set dstaddr "172.16.101.0"
set action accept
set schedule "always"
set service "ALL"
next
end
b. Configure HQ2.
config firewall policy
edit 1
set name "inbound"
set srcintf "to_HQ1"
set dstintf "port9"
set srcaddr "10.1.100.0"
set dstaddr "172.16.101.0"
set action accept
set schedule "always"
set service "ALL"
next
edit 2
set name "outbound"
set srcintf "port9"
set dstintf "to_HQ1"
set srcaddr "172.16.101.0"
set dstaddr "10.1.100.0"
set action accept
set schedule "always"
set service "ALL"
next
end
9. Run diagnose commands. The diagnose debug application ike -1 command is the key to troubleshoot
why the IPsec tunnel failed to establish. If the remote FortiGate certificate cannot be validated, the following error
shows up in the debug output:
ike 0: to_HQ2:15314: certificate validation failed
The following commands are useful to check IPsec phase1/phase2 interface status.
a. Run the diagnose vpn ike gateway list command on HQ1. The system should return the following:
vd: root/0
name: to_HQ2
version: 1
interface: port1 11
addr: 172.16.200.1:500 -> 172.16.202.1:500
created: 7s ago
peer-id: C = CA, ST = BC, L = Burnaby, O = Fortinet, OU = QA, CN = test2
peer-id-auth: yes
IKE SA: created 1/1 established 1/1 time 70/70/70 ms
IPsec SA: created 1/1 established 1/1 time 80/80/80 ms
id/spi: 15326 295be407fbddfc13/7a5a52afa56adf14 direction: initiator status:
FortiOS 6.4.2 Administration Guide 1210
Fortinet Inc.
VPN
established 7-7s ago = 70ms proposal: aes128-sha256 key: 4aa06dbee359a4c7-
43570710864bcf7b lifetime/rekey: 86400/86092 DPD sent/recv: 00000000/00000000 peer-
id: C = CA, ST = BC, L = Burnaby, O = Fortinet, OU = QA, CN = test2
b. Run the diagnose vpn tunnel list command on HQ1. The system should return the following:
list all ipsec tunnel in vd 0
name=to_HQ2 ver=1 serial=1 172.16.200.1:0->172.16.202.1:0
bound_if=11 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/528 options[0210]=create_
dev frag-rfcaccept_traffic=1
proxyid_num=1 child_num=0 refcnt=14 ilast=19 olast=179 ad=/0
stat: rxp=0 txp=0 rxb=0 txb=0
dpd: mode=on-demand on=1 idle=20000ms retry=3 count=0 seqno=0
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=vpn-f proto=0 sa=1 ref=2 serial=1 auto-negotiate
src: 0:0.0.0.0/0.0.0.0:0
dst: 0:0.0.0.0/0.0.0.0:0
SA: ref=3 options=18227 type=00 soft=0 mtu=1438 expire=42717/0B replaywin=2048
seqno=1 esn=0 replaywin_lastseq=00000000 itn=0
life: type=01 bytes=0/0 timeout=42897/43200
dec: spi=72e87de7 esp=aes key=16 8b2b93e0c149d6f22b1c0b96ea450e6c
ah=sha1 key=20 facc655e5f33beb7c2b12e718a6d55413ce3efa2
enc: spi=5c52c865 esp=aes key=16 8d0c4e4adbf2338beed569b2b3205ece
ah=sha1 key=20 553331628612480ab6d7d563a00e2a967ebabcdd
dec:pkts/bytes=0/0, enc:pkts/bytes=0/0
GRE over IPsec
This is an example of GRE over an IPsec tunnel using a static route over GRE tunnel and tunnel-mode in the
phase2-interface settings.
To configure GRE over an IPsec tunnel:
1. Enable subnet overlapping at both HQ1 and HQ2.
config system settings
set allow-subnet-overlap enable
end
2. Configure the WAN interface and static route.
a. HQ1.
config system interface
edit "port1"
FortiOS 6.4.2 Administration Guide 1211
Fortinet Inc.
VPN
set ip 172.16.200.1 255.255.255.0
next
edit "dmz"
set ip 10.1.100.1 255.255.255.0
next
end
config router static
edit 1
set gateway 172.16.200.3
set device "port1"
next
end
b. HQ2.
config system interface
edit "port25"
set ip 172.16.202.1 255.255.255.0
next
edit "port9"
set ip 172.16.101.1 255.255.255.0
next
end
config router static
edit 1
set gateway 172.16.202.2
set device "port25"
next
end
3. Configure IPsec phase1-interface and phase2-interface.
a. HQ1.
config vpn ipsec phase1-interface
edit "greipsec"
set interface "port1"
set peertype any
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
set remote-gw 172.16.202.1
set psksecret sample
next
end
config vpn ipsec phase2-interface
edit "greipsec"
set phase1name "greipsec"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm
aes256gcm chacha20poly1305
set protocol 47
next
end
b. HQ2.
config vpn ipsec phase1-interface
edit "greipsec"
set interface "port25"
set peertype any
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
FortiOS 6.4.2 Administration Guide 1212
Fortinet Inc.
VPN
set remote-gw 172.16.200.1
set psksecret sample
next
end
config vpn ipsec phase2-interface
edit "greipsec"
set phase1name "greipsec"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm
aes256gcm chacha20poly1305
set protocol 47
next
end
4. Configure IPsec tunnel interface IP address.
a. HQ1.
config system interface
edit "greipsec"
set ip 10.10.10.1 255.255.255.255
set remote-ip 10.10.10.2 255.255.255.255
next
end
b. HQ2.
config system interface
edit "greipsec"
set ip 10.10.10.2 255.255.255.255
set remote-ip 10.10.10.1 255.255.255.255
next
end
5. Configure the GRE tunnel.
a. HQ1.
config system gre-tunnel
edit "gre_to_HQ2"
set interface "greipsec"
set remote-gw 10.10.10.2
set local-gw 10.10.10.1
next
end
b. HQ2.
config system gre-tunnel
edit "gre_to_HQ1"
set interface "greipsec"
set remote-gw 10.10.10.1
set local-gw 10.10.10.2
next
end
6. Configure the firewall policy.
a. HQ1.
config firewall policy
edit 1
set srcintf "dmz"
FortiOS 6.4.2 Administration Guide 1213
Fortinet Inc.
VPN
set dstintf "gre_to_HQ2"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
next
edit 2
set srcintf "gre_to_HQ2"
set dstintf "dmz"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
next
edit 3
set srcintf "greipsec"
set dstintf "greipsec"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
next
end
b. HQ2.
config firewall policy
edit 1
set srcintf "port9"
set dstintf "gre_to_HQ1"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
next
edit 2
set srcintf "gre_to_HQ1"
set dstintf "port9"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
next
edit 3
set srcintf "greipsec"
set dstintf "greipsec"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
FortiOS 6.4.2 Administration Guide 1214
Fortinet Inc.
VPN
next
end
7. Configure the static route.
a. HQ1.
config router static
edit 2
set dst 172.16.101.0 255.255.255.0
set device "gre_to_HQ2"
next
end
b. HQ2.
config router static
edit 2
set dst 10.1.100.0 255.255.255.0
set device "gre_to_HQ1"
next
end
To view the VPN tunnel list on HQ1:
diagnose vpn tunnel list
list all ipsec tunnel in vd 0
----
name=greipsec ver=1 serial=1 172.16.200.1:0->172.16.202.1:0
bound_if=5 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/16 options[0010]=create_dev
proxyid_num=1 child_num=0 refcnt=12 ilast=19 olast=861 ad=/0
stat: rxp=347 txp=476 rxb=58296 txb=51408
dpd: mode=on-demand on=1 idle=20000ms retry=3 count=0 seqno=8
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=greipsec proto=47 sa=1 ref=2 serial=2
src: 47:0.0.0.0/0.0.0.0:0
dst: 47:0.0.0.0/0.0.0.0:0
SA: ref=3 options=10226 type=00 soft=0 mtu=1438 expire=41689/0B replaywin=2048
seqno=15c esn=0 replaywin_lastseq=0000015c itn=0
life: type=01 bytes=0/0 timeout=42898/43200
dec: spi=9897bd09 esp=aes key=16 5a60e67bf68379309715bd83931680bf
ah=sha1 key=20 ff35a329056d0d506c0bfc17ef269978a4a57dd3
enc: spi=e362f336 esp=aes key=16 5574acd8587c5751a88950e1bf8fbf57
ah=sha1 key=20 d57ec76ac3c543ac89b2e4d0545518aa2d06669b
dec:pkts/bytes=347/37476, enc:pkts/bytes=347/58296
To view the static routing table on HQ1:
get router info routing-table static
Routing table for VRF=0
S* 0.0.0.0/0 [10/0] via 172.16.200.3, port1
S 172.16.101.0/24 [10/0] is directly connected, gre_to_HQ2
FortiOS 6.4.2 Administration Guide 1215
Fortinet Inc.
VPN
Policy-based IPsec tunnel
This is an example of policy-based IPsec tunnel using site-to-site VPN between branch and HQ. HQ is the IPsec
concentrator.
Sample topology
Sample configuration
To configure a policy-based IPsec tunnel using the GUI:
l Configure the IPsec VPN at HQ.
l Configure the IPsec concentrator at HQ.
l Configure the firewall policy at HQ.
l Configure IPsec VPN at branch 1.
l Configure the firewall policy at branch 1.
l Configure IPsec VPN at branch 2.
l Configure the firewall policy at branch 2.
To configure the IPsec VPN at HQ:
1. Go to VPN > IPsec Wizard to set up branch 1.
a. Enter a VPN Name. In this example, to_branch1.
b. For Template Type, click Custom. Click Next.
c. Uncheck Enable IPsec Interface Mode.
d. For Remote Gateway, select Static IP Address.
e. Enter IP address, in this example, 15.1.1.2.
f. For Interface, select port9.
g. In the Authentication section, for Method, select Pre-shared Key and enter the Pre-shared Key.
h. Click OK.
FortiOS 6.4.2 Administration Guide 1216
Fortinet Inc.
VPN
2. Go to VPN > IPsec Wizard to set up branch 2.
a. Enter a VPN Name. In this example, to_branch2.
b. For Template Type, click Custom. Click Next.
c. Uncheck Enable IPsec Interface Mode.
d. For Remote Gateway, select Static IP Address.
e. Enter IP address, in this example, 13.1.1.2.
f. For Interface, select port9.
g. In the Authentication section, for Method, select Pre-shared Key and enter the Pre-shared Key.
h. Click OK.
To configure the IPsec concentrator at HQ:
1. Go to VPN > IPsec Concentrator and click Create New.
2. Enter a name. In this example, branch.
3. Add the Members to_branch1 and to_branch2.
4. Click OK.
To configure the firewall policy at HQ:
1. Go to Policy & Objects > Firewall Policy and click Create New.
2. Enter a policy Name.
3. For Incoming Interface, select port10.
4. For Outgoing Interface, select port9.
5. Select the Source, Destination, Schedule, Service, and set Action to IPsec.
6. Select the VPN Tunnel, in this example, Branch1/Branch2.
7. In this example, enable Allow traffic to be initiated from the remote site.
8. Click OK.
To configure IPsec VPN at branch 1:
1. Go to VPN > IPsec Wizard to set up branch 1.
2. Enter a VPN name. In this example, to_HQ.
3. For Template Type, click Custom. Click Next.
4. Uncheck Enable IPsec Interface Mode.
5. For Remote Gateway, select Static IP Address.
6. Enter IP address, in this example, 22.1.1.1.
7. For Interface, select wan1.
8. In the Authentication section, for Method, select Pre-shared Key and enter the Pre-shared Key.
9. Click OK.
To configure the firewall policy at branch 1:
1. Go to Policy & Objects > Firewall Policy and click Create New.
2. Enter a policy Name.
3. Choose the Incoming Interface, in this example, internal.
4. Choose the Outgoing Interface, in this example, wan1.
5. Select the Source, Destination, Schedule, Service, and set Action to IPsec.
FortiOS 6.4.2 Administration Guide 1217
Fortinet Inc.
VPN
6. Select the VPN Tunnel, in this example, Branch1/Branch2.
7. In this example, enable Allow traffic to be initiated from the remote site.
8. Click OK.
To configure IPsec VPN at branch 2:
1. Go to VPN > IPsec Wizard to set up branch 1.
2. Enter a VPN name. In this example, to_HQ.
3. For Template Type, click Custom. Click Next.
4. Uncheck Enable IPsec Interface Mode.
5. For Remote Gateway, select Static IP Address.
6. Enter IP address, in this example, 22.1.1.1.
7. For Interface, select wan1.
8. In the Authentication section, for Method, select Pre-shared Key and enter the Pre-shared Key.
9. Click OK.
To configure the firewall policy at branch 2:
1. Go to Policy & Objects > Firewall Policy and click Create New.
2. Enter a policy Name.
3. Choose the Incoming Interface, in this example, internal.
4. Choose the Outgoing Interface, in this example, wan1.
5. Select the Source, Destination, Schedule, Service, and set Action to IPsec.
6. Select the VPN Tunnel, in this example, to_HQ.
7. In this example, enable Allow traffic to be initiated from the remote site.
8. Click OK.
To configure a policy-based IPsec tunnel using the CLI:
1. Configure the HQ WAN interface and static route.
config system interface
edit "port9"
set alias "WAN"
set ip 22.1.1.1 255.255.255.0
next
edit "port10"
set alias "Internal"
set ip 172.16.101.1 255.255.255.0
next
end
config router static
edit 1
set gateway 22.1.1.2
set device "port9"
next
end
2. Configure the HQ IPsec phase1 and phase2.
config vpn ipsec phase1
edit "to_branch1"
FortiOS 6.4.2 Administration Guide 1218
Fortinet Inc.
VPN
set interface "port9"
set peertype any
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
set remote-gw 15.1.1.2
set psksecret sample
next
edit "to_branch2"
set interface "port9"
set peertype any
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
set remote-gw 13.1.1.2
set psksecret sample
next
end
config vpn ipsec phase2
edit "to_branch1"
set phase1name "to_branch1"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm
aes256gcm chacha20poly1305
next
edit "to_branch2"
set phase1name "to_branch2"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm
aes256gcm chacha20poly1305
next
end
3. Configure the firewall policy at HQ.
config firewall policy
edit 1
set srcintf "port10"
set dstintf "port9"
set srcaddr "all"
set dstaddr "10.1.100.0"
set action ipsec
set schedule "always"
set service "ALL"
set inbound enable
set vpntunnel "to_branch1"
next
edit 2
set srcintf "port10"
set dstintf "port9"
set srcaddr "all"
set dstaddr "192.168.4.0"
set action ipsec
set schedule "always"
set service "ALL"
set inbound enable
set vpntunnel "to_branch2"
next
end
FortiOS 6.4.2 Administration Guide 1219
Fortinet Inc.
VPN
4. Configure the IPsec concentrator at HQ.
config vpn ipsec concentrator
edit "branch"
set member "to_branch1" "to_branch2"
next
end
5. Configure the branch WAN interface and static route.
a. For branch 1.
config system interface
edit "wan1"
set alias "primary_WAN"
set ip 15.1.1.2 255.255.255.0
next
edit "internal"
set ip 10.1.100.1 255.255.255.0
next
end
config router static
edit 1
set gateway 15.1.1.1
set device "wan1"
next
end
b. For branch 2.
config system interface
edit "wan1"
set alias "primary_WAN"
set ip 13.1.1.2 255.255.255.0
next
edit "internal"
set ip 192.168.4.1 255.255.255.0
next
end
config router static
edit 1
set gateway 13.1.1.1
set device "wan1"
next
end
6. Configure the branch IPsec phase1 and phase2.
a. For branch 1.
config vpn ipsec phase1
edit "to_HQ"
set interface "wan1"
set peertype any
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
set remote-gw 22.1.1.1
set psksecret sample
next
end
config vpn ipsec phase2
FortiOS 6.4.2 Administration Guide 1220
Fortinet Inc.
VPN
edit "to_HQ"
set phase1name "to_HQ"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm
aes256gcm chacha20poly1305
next
end
b. For branch 2.
config vpn ipsec phase1
edit "to_HQ"
set interface "wan1"
set peertype any
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
set remote-gw 22.1.1.1
set psksecret sample
next
end
config vpn ipsec phase2
edit "to_HQ"
set phase1name "to_HQ"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm
aes256gcm chacha20poly1305
next
end
7. Configure the branch firewall policy.
a. For branch 1.
config firewall policy
edit 1
set srcintf "internal"
set dstintf "wan1"
set srcaddr "10.1.100.0"
set dstaddr "all"
set action ipsec
set schedule "always"
set service "ALL"
set inbound enable
set vpntunnel "to_HQ"
next
end
b. For branch 2.
config firewall policy
edit 1
set srcintf "internal"
set dstintf "wan1"
set srcaddr "192.168.4.0"
set dstaddr "all"
set action ipsec
set schedule "always"
set service "ALL"
set inbound enable
set vpntunnel "to_HQ"
next
end
FortiOS 6.4.2 Administration Guide 1221
Fortinet Inc.
VPN
To view the IPsec VPN tunnel list at HQ:
# diagnose vpn tunnel list
list all ipsec tunnel in vd 0
----
name=to_branch1 ver=1 serial=4 22.1.1.1:0->15.1.1.2:0
bound_if=42 lgwy=static/1 tun=tunnel/1 mode=auto/1 encap=none/8 options[0008]=npu
proxyid_num=1 child_num=0 refcnt=8 ilast=0 olast=0 ad=/0
stat: rxp=305409 txp=41985 rxb=47218630 txb=2130108
dpd: mode=on-demand on=1 idle=20000ms retry=3 count=0 seqno=0
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=to_branch1 proto=0 sa=1 ref=3 serial=1
src: 0:0.0.0.0/0.0.0.0:0
dst: 0:0.0.0.0/0.0.0.0:0
SA: ref=6 options=10226 type=00 soft=0 mtu=1438 expire=42604/0B replaywin=2048
seqno=1 esn=0 replaywin_lastseq=00000680 itn=0
life: type=01 bytes=0/0 timeout=42932/43200
dec: spi=ca646442 esp=aes key=16 58c91d4463968dddccc4fd97de90a4b8
ah=sha1 key=20 c9176fe2fbc82ef7e726be9ad4af83eb1b55580a
enc: spi=747c10c4 esp=aes key=16 7cf0f75b784f697bc7f6d8b4bb8a83c1
ah=sha1 key=20 cdddc376a86f5ca0149346604a59af07a33b11c5
dec:pkts/bytes=1664/16310, enc:pkts/bytes=0/16354
npu_flag=03 npu_rgwy=15.1.1.2 npu_lgwy=22.1.1.1 npu_selid=3 dec_npuid=2 enc_npuid=2
----
name=to_branch2 ver=1 serial=5 22.1.1.1:0->13.1.1.2:0
bound_if=42 lgwy=static/1 tun=tunnel/1 mode=auto/1 encap=none/8 options[0008]=npu
proxyid_num=1 child_num=0 refcnt=7 ilast=2 olast=43228 ad=/0
stat: rxp=0 txp=0 rxb=0 txb=0
dpd: mode=on-demand on=1 idle=20000ms retry=3 count=0 seqno=0
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=to_branch2 proto=0 sa=1 ref=2 serial=1
src: 0:0.0.0.0/0.0.0.0:0
dst: 0:0.0.0.0/0.0.0.0:0
SA: ref=3 options=10226 type=00 soft=0 mtu=1280 expire=40489/0B replaywin=2048
seqno=1 esn=0 replaywin_lastseq=00000000 itn=0
life: type=01 bytes=0/0 timeout=42931/43200
dec: spi=ca646441 esp=aes key=16 57ab680d29d4aad4e373579fb50e9909
ah=sha1 key=20 12a2bc703d2615d917ff544eaff75a6d2c17f1fe
enc: spi=f9cffb61 esp=aes key=16 3d64da9feb893874e007babce0229259
ah=sha1 key=20 f92a3ad5e56cb8e89c47af4dac10bf4b4bebff16
dec:pkts/bytes=0/0, enc:pkts/bytes=0/0
npu_flag=00 npu_rgwy=13.1.1.2 npu_lgwy=22.1.1.1 npu_selid=4 dec_npuid=0 enc_npuid=0
To view the IPsec VPN concentrator at HQ:
# diagnose vpn concentrator list
list all ipsec concentrator in vd 0
name=branch ref=3 tuns=2 flags=0
IKEv2 IPsec site-to-site VPN to an AWS VPN gateway
This is a sample configuration of an IPsec site-to-site VPN connection between an on-premise FortiGate and an AWS
virtual private cloud (VPC).
FortiOS 6.4.2 Administration Guide 1222
Fortinet Inc.
VPN
AWS uses unique identifiers to manipulate a VPN connection's configuration. Each VPN connection is assigned an
identifier and is associated with two other identifiers: the customer gateway ID for the FortiGate and virtual private
gateway ID.
This example includes the following IDs:
l VPN connection ID: vpn-07e988ccc1d46f749
l Customer gateway ID: cgw-0440c1aebed2f418a
l Virtual private gateway ID
This example assumes that you have configured VPC-related settings in the AWS management portal as described in
Create a Secure Connection using AWS VPC.
This example includes creating and configuring two tunnels. You must configure both tunnels on your FortiGate.
To configure IKEv2 IPsec site-to-site VPN to an AWS VPN gateway:
1. Configure the first VPN tunnel:
a. Configure Internet Key Exchange (IKE).
b. Configure IPsec.
c. Configure the tunnel interface.
d. Configure border gateway protocol (BGP).
e. Configure firewall policies.
2. Configure the second VPN tunnel:
a. Configure Internet Key Exchange (IKE).
b. Configure IPsec.
c. Configure the tunnel interface.
d. Configure BGP.
e. Configure firewall policies.
To configure IKE for the first VPN tunnel:
A policy is established for the supported ISAKMP encryption, authentication, Diffie-Hellman (DH), lifetime, and key
parameters. These sample configurations fulfill the minimum requirements for AES128, SHA1, and DH Group 2.
Category VPN connections in the GovCloud AWS region have a minimum requirement of AES128, SHA2, and
DH Group 14. To take advantage of AES256, SHA256, or other DH groups such as 14-18, 22, 23, and 24, you must
modify these sample configuration files. Higher parameters are only available for VPNs of category "VPN", not for "VPN-
Classic".
Your FortiGate's external interface's address must be static. Your FortiGate may reside behind a device performing NAT.
To ensure NAT traversal can function, you must adjust your firewall rules to unblock UDP port 4500. If not behind NAT, it
is recommended to disable NAT traversal.
Begin configuration in the root VDOM. The interface name must be shorter than 15 characters. It is best if the name is
shorter than 12 characters. IPsec dead peer detection (DPD) causes periodic messages to be sent to ensure a security
association remains operational.
config vpn ipsec phase1-interface
edit vpn-07e988ccc1d46f749-0
set interface "wan1"
set dpd enable
set local-gw 35.170.66.108
set dhgrp 2
set proposal aes128-sha1
FortiOS 6.4.2 Administration Guide 1223
Fortinet Inc.
VPN
set keylife 28800
set remote-gw 3.214.239.164
set psksecret iCelks0UOob8z4SYMRM6zlx.rU2C3jth
set dpd-retryinterval 10
next
end
To configure IPsec for the first VPN tunnel:
The IPsec transform set defines the encryption, authentication, and IPsec mode parameters.
config vpn ipsec phase2-interface
edit "vpn-07e988ccc1d46f749-0"
set phase1name "vpn-07e988ccc1d46f749-0"
set proposal aes128-sha1
set dhgrp 2
set pfs enable
set keylifeseconds 3600
next
end
To configure the tunnel interface for the first VPN tunnel:
You must configure a tunnel interface as the logical interface associated with the tunnel. All traffic routed to the tunnel
interface must be encrypted and transmitted to the VPC. Similarly, traffic from the VPC will be logically received on this
interface.
You must configure the interface's address with your FortiGate's address. If the address changes, you must recreate the
FortiGate and VPN connection with Amazon VPC.
The tcp-mss option causes the router to reduce the TCP packets' maximum segment size to prevent packet
fragmentation.
config system interface
edit "vpn-07e988ccc1d46f749-0"
set vdom "root"
set ip 169.254.45.90 255.255.255.255
set allowaccess ping
set type tunnel
set tcp-mss 1379
set remote-ip 169.254.45.89
set mtu 1427
set interface "wan1"
next
end
To configure BGP for the first VPN tunnel:
BGP is used within the tunnel to exchange prefixes between the virtual private gateway and your FortiGate. The virtual
private gateway announces the prefix according to your VPC.
The local BGP autonomous system number (ASN) (65000) is configured as part of your FortiGate. If you must change
the ASN, you must recreate the FortiGate and VPN connection with AWS.
Your FortiGate may announce a default route (0.0.0.0/0) to AWS. This is done using a prefix list and route map in
FortiOS.
config router bgp
FortiOS 6.4.2 Administration Guide 1224
Fortinet Inc.
VPN
set as 65000
config neighbor
edit 169.254.45.89
set remote-as 64512
end
end
end
config router bgp
config neighbor
edit 169.254.45.89
set capability-default-originate enable
end
end
end
config router prefix-list
edit "default_route"
config rule
edit 1
set prefix 0.0.0.0 0.0.0.0
next
end
end
end
config router route-map
edit "routemap1"
config rule
edit 1
set match-ip-address "default_route"
next
end
next
end
To advertise additional prefixes to the Amazon VPC, add these prefixes to the network statement and identify the prefix
you want to advertise. Ensure that the prefix is present in the routing table of the device with a valid next-hop. If you want
to advertise 192.168.0.0/16 to Amazon, you would do the following:
config router bgp
config network
edit 1
set prefix 192.168.0.0 255.255.0.0
next
end
To configure firewall policies for the first VPN tunnel:
Create a firewall policy permitting traffic from your local subnet to the VPC subnet, and vice-versa.
This example policy permits all traffic from the local subnet to the VPC. First, view all existing policies using the show
firewall policy command. Then, create a new firewall policy starting with the next available policy ID. In this
example, running show firewall policy displayed policies 1, 2, 3, and 4, so you would proceed to create policy 5.
config firewall policy
edit 5
set srcintf "vpn-07e988ccc1d46f749-0"
set dstintf internal
set srcaddr all
set dstaddr all
FortiOS 6.4.2 Administration Guide 1225
Fortinet Inc.
VPN
set action accept
set schedule always
set service ANY
next
end
config firewall policy
edit 5
set srcintf internal
set dstintf "vpn-07e988ccc1d46f749-0"
set srcaddr all
set dstaddr all
set action accept
set schedule always
set service ANY
next
end
To configure IKE for the second VPN tunnel:
A policy is established for the supported ISAKMP encryption, authentication, DH, lifetime, and key parameters. These
sample configurations fulfill the minimum requirements for AES128, SHA1, and DH Group 2. Category VPN connections
in the GovCloud AWS region have a minimum requirement of AES128, SHA2, and DH Group 14. To take advantage of
AES256, SHA256, or other DH groups such as 14-18, 22, 23, and 24, you must modify these sample configuration files.
Higher parameters are only available for VPNs of category "VPN", not for "VPN-Classic".
Your FortiGate's external interface's address must be static. Your FortiGate may reside behind a device performing NAT.
To ensure NAT traversal can function, you must adjust your firewall rules to unblock UDP port 4500. If not behind NAT, it
is recommended to disable NAT traversal.
Begin configuration in the root VDOM. The interface name must be shorter than 15 characters. It is best if the name is
shorter than 12 characters. IPsec DPD causes periodic messages to be sent to ensure a security association remains
operational.
config vpn ipsec phase1-interface
edit vpn-07e988ccc1d46f749-1
set interface "wan1"
set dpd enable
set local-gw 35.170.66.108
set dhgrp 2
set proposal aes128-sha1
set keylife 28800
set remote-gw 100.25.187.58
set psksecret IjFzyDneUtDdAT4RNmQ85apUG3y4Akre
set dpd-retryinterval 10
next
end
To configure IPsec for the second VPN tunnel:
The IPsec transform set defines the encryption, authentication, and IPsec mode parameters.
config vpn ipsec phase2-interface
edit "vpn-07e988ccc1d46f749-1"
set phase1name "vpn-07e988ccc1d46f749-1"
set proposal aes128-sha1
set dhgrp 2
set pfs enable
FortiOS 6.4.2 Administration Guide 1226
Fortinet Inc.
VPN
set keylifeseconds 3600
next
end
To configure the tunnel interface for the second VPN tunnel:
You must configure a tunnel interface as the logical interface associated with the tunnel. All traffic routed to the tunnel
interface must be encrypted and transmitted to the VPC. Similarly, traffic from the VPC will be logically received on this
interface.
You must configure the interface's address with your FortiGate's address. If the address changes, you must recreate the
FortiGate and VPN connection with Amazon VPC.
The tcp-mss option causes the router to reduce the TCP packets' maximum segment size to prevent packet
fragmentation.
config system interface
edit "vpn-07e988ccc1d46f749-1"
set vdom "root"
set ip 169.254.44.162 255.255.255.255
set allowaccess ping
set type tunnel
set tcp-mss 1379
set remote-ip 169.254.44.161
set mtu 1427
set interface "wan1"
next
end
To configure BGP for the second VPN tunnel:
BGP is used within the tunnel to exchange prefixes between the virtual private gateway and your FortiGate. The virtual
private gateway announces the prefix according to your VPC.
The local BGP ASN (65000) is configured as part of your FortiGate. If you must change the ASN, you must recreate the
FortiGate and VPN connection with AWS.
Your FortiGate may announce a default route (0.0.0.0/0) to AWS. This is done using a prefix list and route map in
FortiOS.
config router bgp
set as 65000
config neighbor
edit 169.254.44.161
set remote-as 64512
end
config router bgp
config neighbor
edit 169.254.44.161
set capability-default-originate enable
end
end
config router prefix-list
edit "default_route"
config rule
edit 1
set prefix 0.0.0.0 0.0.0.0
next
FortiOS 6.4.2 Administration Guide 1227
Fortinet Inc.
VPN
end
end
end
config router route-map
edit "routemap1"
config rule
edit 1
set match-ip-address "default_route"
next
end
next
end
To advertise additional prefixes to the Amazon VPC, add these prefixes to the network statement and identify the prefix
you want to advertise. Ensure that the prefix is present in the routing table of the device with a valid next-hop. If you want
to advertise 192.168.0.0/16 to Amazon, you would do the following:
config router bgp
config network
edit 1
set prefix 192.168.0.0 255.255.0.0
next
end
To configure firewall policies for the second VPN tunnel:
Create a firewall policy permitting traffic from your local subnet to the VPC subnet, and vice-versa.
This example policy permits all traffic from the local subnet to the VPC. First, view all existing policies using the show
firewall policy command. Then, create a new firewall policy starting with the next available policy ID. In this
example, running show firewall policy displayed policies 1, 2, 3, 4, and 5, so you would proceed to create policy
6.
config firewall policy
edit 6
set srcintf "vpn-07e988ccc1d46f749-1"
set dstintf internal
set srcaddr all
set dstaddr all
set action accept
set schedule always
set service ANY
next
end
config firewall policy
edit 6
set srcintf internal
set dstintf "vpn-07e988ccc1d46f749-1"
set srcaddr all
set dstaddr all
set action accept
set schedule always
set service ANY
next
end
FortiOS 6.4.2 Administration Guide 1228
Fortinet Inc.
VPN
IPsec VPN to Azure with virtual network gateway
This example shows how to configure a site-to-site IPsec VPN tunnel to Microsoft Azure. It shows how to configure a
tunnel between each site, avoiding overlapping subnets, so that a secure tunnel can be established.
Prerequisites
l A FortiGate with an Internet-facing IP address
l A valid Microsoft Azure account
Sample topology
Sample configuration
This sample configuration shows how to:
1. Configure an Azure virtual network
2. Specify the Azure DNS server
3. Configure the Azure virtual network gateway
4. Configure the Azure local network gateway
5. Configure the FortiGate tunnel
6. Create the Azure firewall object
7. Create the FortiGate firewall policies
8. Create the FortiGate static route
9. Create the Azure site-to-site VPN connection
10. Check the results
To configure an Azure virtual network:
1. Log in to Azure and click New.
2. In Search the Marketplace, type Virtual network.
FortiOS 6.4.2 Administration Guide 1229
Fortinet Inc.
VPN
3. Click Virtual network to open the Virtual network pane.
4. At the bottom of the Virtual network pane, click the Select a deployment model dropdown list and select Resource
Manager.
5. Click Create.
FortiOS 6.4.2 Administration Guide 1230
Fortinet Inc.
VPN
6. On the Create virtual network pane, enter you virtual network settings, and click Create.
To specify the Azure DNS server:
1. Open the virtual network you just created.
2. Click DNS servers to open the DNS servers pane.
3. Enter the IP address of the DNS server and click Save.
FortiOS 6.4.2 Administration Guide 1231
Fortinet Inc.
VPN
To configure the Azure virtual network gateway:
1. In the portal dashboard, go to New.
2. Search for Virtual Network Gateway and click it to open the Virtual network gateway pane.
3. Click Create Virtual network gateways and enter the settings for your virtual network gateway.
4. If needed, create a Public IP address.
5. Click Create.
Creating the virtual network gateway might take some time. When the provisioning is done, you'll receive a
notification.
FortiOS 6.4.2 Administration Guide 1232
Fortinet Inc.
VPN
To configure the Azure local network gateway:
1. In the portal dashboard, click All resources.
2. Click Add and then click See all.
3. In the Everything pane, search for Local network gateway and then click Create local network gateway.
FortiOS 6.4.2 Administration Guide 1233
Fortinet Inc.
VPN
4. For the IP address, enter the local network gateway IP address, that is, the FortiGate's external IP address.
5. Set the remaining values for your local network gateway and click Create.
To configure the FortiGate tunnel:
1. In the FortiGate, go to VPN > IP Wizard.
2. Enter a Name for the tunnel, click Custom, and then click Next.
3. Configure the Network settings.
l For Remote Gateway, select Static IP Address and enter the IP address provided by Azure.
l For Interface, select wan1.
l For NAT Traversal, select Disable,
l For Dead Peer Detection, select On Idle.
l In the Authentication section, select
4. Configure the Authentication settings.
l For Method, select Pre-shared Key and enter the Pre-shared Key.
l For IKE, select 2.
FortiOS 6.4.2 Administration Guide 1234
Fortinet Inc.
VPN
5. Configure the Phase 1 Proposal settings.
l Set the Encryption and Authentication combination to the three supported encryption algorithm combinations
accepted by Azure.
l AES256 and SHA1
l 3DES and SHA1
l AES256 and SHA256
l For Diffie-Hellman Groups, select 2.
l Set Key Lifetime (seconds) to 28800.
6. In Phase 2 Selectors, expand the Advanced section to configure the Phase 2 Proposal settings.
l Set the Encryption and Authentication combinations.
l AES256 and SHA1
l 3DES and SHA1
l AES256 and SHA256
l Uncheck Enable Perfect Forward Secrecy (PFS).
l Set Key Lifetime (seconds) to 27000.
FortiOS 6.4.2 Administration Guide 1235
Fortinet Inc.
VPN
7. Click OK.
To create the Azure firewall object:
1. In the FortiGate, go to Policy & Objects > Addresses.
2. Create a firewall object for the Azure VPN tunnel.
FortiOS 6.4.2 Administration Guide 1236
Fortinet Inc.
VPN
To create the FortiGate firewall policies:
1. In the FortiGate, go to Policy & Objects > Firewall Policy.
2. Create a policy for the site-to-site connection that allows outgoing traffic.
l Set the Source address and Destination address using the firewall objects you just created.
l Disable NAT.
3. Create another policy that allows incoming traffic.
l For this policy, reverse the Source address and Destination address.
4. We recommend limiting the TCP maximum segment size (MSS) being sent and received so as to avoid packet
drops and fragmentation.
FortiOS 6.4.2 Administration Guide 1237
Fortinet Inc.
VPN
To do this, use the following CLI commands on both policies.
config firewall policy
edit <policy-id>
set tcp-mss-sender 1350
set tcp-mss-receiver 1350
next
end
To create the FortiGate static route:
1. In the FortiGate, go to Network > Static Routes.
2. Create an IPv4 Static Route that forces outgoing traffic going to Azure to go through the route-based tunnel.
3. Set the Administrative Distance to a value lower than the existing default route value.
To create the Azure site-to-site VPN connection:
1. In the Azure portal, locate and select your virtual network gateway.
2. In the Settings pane, click Connections and then click Add.
3. Enter the settings for your connection. Ensure the Shared Key (PSK) matches the Pre-shared Key for the FortiGate
tunnel.
FortiOS 6.4.2 Administration Guide 1238
Fortinet Inc.
VPN
To check the results:
1. In the FortiGate, go to Monitor > IPsec Monitor.
l Check that the tunnel is up.
l If the tunnel is down, right-click the tunnel and select Bring Up.
2. In the FortiGate, go to Log & Report > Events.
l Select an event to view more information and verify the connection.
3. In the Azure portal dashboard, click All resources and locate your virtual network gateway.
a. In your virtual network gateway pane, click Connections to see the status of each connection.
b. Click a connection to open the Essentials pane to view more information about that connection.
l If the connection is successful, the Status shows Connected.
l See the ingress and egress bytes to confirm traffic flowing through the tunnel.
IPsec VPN to an Azure with virtual WAN
This is a sample configuration of an IPsec site-to-site VPN connection between an on-premise FortiGate and an Azure
virtual network (VNet). This example uses Azure virtual WAN (vWAN) to establish the VPN connection.
FortiOS 6.4.2 Administration Guide 1239
Fortinet Inc.
VPN
l Azure must use IPsec v2 for this configuration.
l Azure uses overlapped subnet IP addresses for the IPsec interfaces.
To configure IKEv2 IPsec site-to-site VPN to an Azure VPN gateway:
1. In the Azure management portal, configure vWAN-related settings as described in Tutorial: Create a Site-to-Site
connection using Azure Virtual WAN.
2. Download the VPN configuration. The following shows an example VPN configuration:
[
{
"configurationVersion":{"LastUpdatedTime":"2019-07-
16T22:16:28.0409002Z","Version":"be5c5787-b903-43b1-a237-
49eae1b373e4"},"vpnSiteConfiguration":
{"Name":"toaws","IPAddress":"3.220.252.93","BgpSetting":
{"Asn":7225,"BgpPeeringAddress":"169.254.24.25","PeerWeight":32768},"LinkName":"toa
ws"},"vpnSiteConnections":[{"hubConfiguration":
{"AddressSpace":"10.1.0.0/16","Region":"West US","ConnectedSubnets":
["10.2.0.0/16"]},"gatewayConfiguration":{"IpAddresses":
{"Instance0":"52.180.90.47","Instance1":"52.180.89.94"},"BgpSetting":
{"Asn":65515,"BgpPeeringAddresses":
{"Instance0":"10.1.0.7","Instance1":"10.1.0.6"},"PeerWeight":0}},"connectionConfigu
ration":{"IsBgpEnabled":true,"PSK":"Fortinet123#","IPsecParameters":
{"SADataSizeInKilobytes":102400000,"SALifeTimeInSeconds":3600}}}]} ]
3. Configure the following on the FortiGate. Note for set proposal, you can select from several proposals.
config vpn ipsec phase1-interface
edit "toazure1"
set interface "port1"
set ike-version 2
set keylife 28800
set peertype any
set proposal aes256-sha1
set dhgrp 2
set remote-gw 52.180.90.47
set psksecret **********
next
edit "toazure2"
set interface "port1"
set ike-version 2
set keylife 28800
set peertype any
set proposal aes256-sha1
set dhgrp 2
set remote-gw 52.180.89.94
set psksecret **********
next
end
config vpn ipsec phase2-interface
edit "toazure1"
set phase1name "toazure1"
set proposal aes256-sha1
set dhgrp 2
set keylifeseconds 3600
next
edit "toazure2"
set phase1name "toazure2"
set proposal aes256-sha1
FortiOS 6.4.2 Administration Guide 1240
Fortinet Inc.
VPN
set dhgrp 2
set keylifeseconds 3600
next
end
config system settings
set allow-subnet-overlap enable
end
config system interface
edit "toazure1"
set vdom "root"
set ip 169.254.24.25 255.255.255.255
set type tunnel
set remote-ip 10.1.0.7 255.255.255.255
set snmp-index 4
set interface "port1"
next
edit "toazure2"
set vdom "root"
set ip 169.254.24.25 255.255.255.255
set type tunnel
set remote-ip 10.1.0.6 255.255.255.255
set snmp-index 5
set interface "port1"
next
end
config router bgp
set as 7225
set router-id 169.254.24.25
config neighbor
edit "10.1.0.7"
set remote-as 65515
next
edit "10.1.0.6"
set remote-as 65515
next
end
config network
edit 1
set prefix 172.30.101.0 255.255.255.0
next
end
config redistribute "connected"
set status enable
end
config redistribute "rip"
end
config redistribute "ospf"
end
config redistribute "static"
end
config redistribute "isis"
end
config redistribute6 "connected"
end
config redistribute6 "rip"
end
config redistribute6 "ospf"
FortiOS 6.4.2 Administration Guide 1241
Fortinet Inc.
VPN
end
config redistribute6 "static"
end
config redistribute6 "isis"
end
end
4. Run diagnose vpn tunnel list. If the configuration was successful, the output should resemble the following:
name=toazure1 ver=2 serial=3 172.30.1.83:4500->52.180.90.47:4500
bound_if=3 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/0
proxyid_num=1 child_num=0 refcnt=15 ilast=16 olast=36 ad=/0
stat: rxp=41 txp=41 rxb=5104 txb=2209
dpd: mode=on-demand on=1 idle=20000ms retry=3 count=0 seqno=1
natt: mode=keepalive draft=0 interval=10 remote_port=4500
proxyid=toazure1 proto=0 sa=1 ref=2 serial=4
src: 0:0.0.0.0/0.0.0.0:0
dst: 0:0.0.0.0/0.0.0.0:0
SA: ref=3 options=10226 type=00 soft=0 mtu=8926 expire=2463/0B replaywin=2048
seqno=2a esn=0 replaywin_lastseq=00000029 itn=0
life: type=01 bytes=0/0 timeout=3300/3600
dec: spi=c13f7928 esp=aes key=32
009a86bb0d6f5fee66af7b8232c8c0f22e6ec5c61ba19c93569bd0cd115910a9
ah=sha1 key=20 f05bfeb0060afa89d4afdfac35960a8a7a4d4856
enc: spi=b40a6c70 esp=aes key=32
a1e361075267ba72b39924c5e6c766fd0b08e0548476de2792ee72057fe60d1d
ah=sha1 key=20 b1d24bedb0eb8fbd26de3e7c0b0a3a799548f52f
dec:pkts/bytes=41/2186, enc:pkts/bytes=41/5120
------------------------------------------------------
name=toazure2 ver=2 serial=4 172.30.1.83:4500->52.180.89.94:4500
bound_if=3 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/0
proxyid_num=1 child_num=0 refcnt=16 ilast=16 olast=16 ad=/0
stat: rxp=40 txp=40 rxb=4928 txb=2135
dpd: mode=on-demand on=1 idle=20000ms retry=3 count=0 seqno=1
natt: mode=keepalive draft=0 interval=10 remote_port=4500
proxyid=toazure2 proto=0 sa=1 ref=2 serial=4
src: 0:0.0.0.0/0.0.0.0:0
dst: 0:0.0.0.0/0.0.0.0:0
SA: ref=3 options=10626 type=00 soft=0 mtu=8926 expire=2427/0B replaywin=2048
seqno=29 esn=0 replaywin_lastseq=00000028 itn=0
life: type=01 bytes=0/0 timeout=3299/3600
dec: spi=c13f791d esp=aes key=32
759898cbb7fafe448116b1fb0fb6d2f0eb99621ea6ed8dd4417ffdb901eb82be
ah=sha1 key=20 533ec5dc8a1910221e7742b12f9de1b41205622c
enc: spi=67934bfe esp=aes key=32
9b5710bfb4ba784722241ec371ba8066629febcd75da6f8471915bdeb874ca80
ah=sha1 key=20 5099fed7edac2b960294094f1a8188ab42f34d7b
dec:pkts/bytes=40/2087, enc:pkts/bytes=40/4976
Routing table for VRF=0
Codes: K - kernel, C - connected, S - static, R - RIP, B - BGP
O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
FortiOS 6.4.2 Administration Guide 1242
Fortinet Inc.
VPN
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default
S* 0.0.0.0/0 [5/0] via 172.30.1.1, port1
B 10.1.0.0/16 [20/0] via 10.1.0.6, toazure2, 00:15:01
C 10.1.0.6/32 is directly connected, toazure2
C 10.1.0.7/32 is directly connected, toazure1
B 10.2.0.0/16 [20/0] via 10.1.0.6, toazure2, 00:15:01
C 169.254.24.25/32 is directly connected, toazure1
is directly connected, toazure2
C 172.30.1.0/24 is directly connected, port1
C 172.30.101.0/24 is directly connected, port2
IPSec VPN between a FortiGate and a Cisco ASA with multiple subnets
When a Cisco ASA unit has multiple subnets configured, multiple phase 2 tunnels must be created on the FortiGate to
allocate to each subnet (rather than having multiple subnets on one phase 2 tunnel).
The FortiGate uses the same SPI value to bring up the phase 2 negotiation for all of the subnets, while the Cisco ASA
expects different SPI values for each of its configured subnets. Using multiple phase 2 tunnels on the FortiGate creates
different SPI values for each subnet.
To configure multiple phase 2 interfaces in route-based mode:
config vpn ipsec phase2-interface
edit "First subnet"
set phase1name "VPN to Cisco"
set src-subnet 192.168.227.253 255.255.255.255
set dst-subnet 10.142.0.0 255.255.254.0
next
edit "Second subnet"
set phase1name "VPN to Cisco"
set src-subnet 192.168.227.253 255.255.255.255
set dst-subnet 10.143.0.0 255.255.254.0
next
end
To configure multiple phase 2 interfaces in policy-based mode:
config vpn ipsec phase2
edit "First subnet"
set phase1name "VPN to Cisco"
set src-subnet 192.168.227.253 255.255.255.255
set dst-subnet 10.142.0.0 255.255.254.0
next
edit "Second subnet"
set phase1name "VPN to Cisco"
set src-subnet 192.168.227.253 255.255.255.255
set dst-subnet 10.143.0.0 255.255.254.0
next
end
FortiOS 6.4.2 Administration Guide 1243
Fortinet Inc.
VPN
Remote access
Remote access lets users connect to the Internet using a dialup connection over traditional POTS or ISDN telephone
lines. Virtual private network (VPN) protocols are used to secure these private connections.
The following topics provide instructions on configuring remote access:
l FortiGate as dialup client on page 1244
l FortiClient as dialup client on page 1250
l Add FortiToken multi-factor authentication on page 1255
l Add LDAP user authentication on page 1256
l iOS device as dialup client on page 1257
l IPsec VPN with external DHCP service on page 1262
l L2TP over IPsec on page 1268
l Tunneled Internet browsing on page 1272
FortiGate as dialup client
This is a sample configuration of dialup IPsec VPN and the dialup client. In this example, a branch office FortiGate
connects via dialup IPsec VPN to the HQ FortiGate.
You can configure dialup IPsec VPN with FortiGate as the dialup client using the GUI or CLI.
To configure IPsec VPN with FortiGate as the dialup client in the GUI:
1. Configure the dialup VPN server FortiGate:
a. Go to VPN > IPsec Wizard and configure the following settings for VPN Setup:
i. Enter a VPN name.
ii. For Template Type, select Site to Site.
iii. For Remote Device Type, select FortiGate.
iv. For NAT Configuration, select The remote site is behind NAT.
v. Click Next.
b. Configure the following settings for Authentication:
i. For Incoming Interface, select the incoming interface.
ii. For Authentication Method, select Pre-shared Key.
iii. In the Pre-shared Key field, enter your-psk as the key.
iv. Click Next.
c. Configure the following settings for Policy & Routing:
i. From the Local Interface dropdown menu, select the local interface.
ii. Configure the Local Subnets as 10.1.100.0/24.
FortiOS 6.4.2 Administration Guide 1244
Fortinet Inc.
VPN
iii. Configure the Remote Subnets as 172.16.101.0/24.
iv. Click Create.
2. Configure the dialup VPN client FortiGate:
a. Go to VPN > IPsec Wizard and configure the following settings for VPN Setup:
i. Enter a VPN name.
ii. For Template Type, select Site to Site.
iii. For Remote Device Type, select FortiGate.
iv. For NAT Configuration, select This site is behind NAT.
v. Click Next.
b. Configure the following settings for Authentication:
i. For IP Address, enter 11.101.1.1.
ii. For Outgoing Interface, select port13.
iii. For Authentication Method, select Pre-shared Key.
iv. In the Pre-shared Key field, enter your-psk as the key.
v. Click Next.
c. Configure the following settings for Policy & Routing:
i. From the Local Interface dropdown menu, select the local interface. In this example, it is port9.
ii. Configure the Local Subnets as 172.16.101.0.
iii. Configure the Remote Subnets as 10.1.100.0.
iv. Click Create.
To configure IPsec VPN with FortiGate as the dialup client in the CLI:
1. In the CLI, configure the user, user group, and firewall address. Only the HQ dialup server FortiGate needs this
configuration. The address is an IP pool to assign an IP address for the dialup client FortiGate.
config user local
edit "vpnuser1"
set type password
set passwd your-password
next
end
config user group
edit "vpngroup"
set member "vpnuser1"
next
end
config firewall address
edit "client_range"
set type iprange
set start-ip 10.10.10.1
set end-ip 10.10.10.200
next
end
2. Configure the WAN interface and default route. The WAN interface is the interface connected to the ISP. It can work
in static mode (as shown in this example), DHCP, or PPPoE mode. The IPsec tunnel is established over the
WAN interface.
a. Configure the HQ FortiGate.
config system interface
edit "wan1"
FortiOS 6.4.2 Administration Guide 1245
Fortinet Inc.
VPN
set vdom "root"
set ip 11.101.1 255.255.255.0
next
end
config router static
edit 1
set gateway 11.101.1.2
set device "wan1"
next
end
b. Configure the branch office FortiGate.
config system interface
edit "port13"
set vdom "root"
set ip 173.1.1.1 255.255.255.0
next
end
config router static
edit 1
set gateway 173.1.1.2
set device "port13"
next
end
3. Configure the internal interface and protected subnet. The internal interface connects to the internal network. Traffic
from this interface will route out the IPsec VPN tunnel.
a. Configure the HQ FortiGate.
config system interface
edit "dmz"
set vdom "root"
set ip 10.1.100.1 255.255.255.0
next
end
config firewall address
edit "10.1.100.0"
set subnet 10.1.100.0 255.255.255.0
next
end
b. Configure the branch office FortiGate.
config system interface
edit "port9"
set vdom "root"
set ip 172.16.101.1 255.255.255.0
next
end
config firewall address
edit "172.16.101.0"
set subnet 172.16.101.0 255.255.255.0
next
end
4. Configure the IPsec phase1-interface. In this example, PSK is used as the authentication method. Signature
authentication is also an option.
FortiOS 6.4.2 Administration Guide 1246
Fortinet Inc.
VPN
a. Configure the HQ FortiGate.
config vpn ipsec phase1-interface
edit "for_Branch"
set type dynamic
set interface "wan1"
set mode aggressive
set peertype any
set mode-cfg enable
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
set add-route disable
set dpd on-idle
set xauthtype auto
set authusrgrp "vpngroup"
set net-device enable
set assign-ip-from name
set dns-mode auto
set ipv4-split-include "10.1.100.0"
set ipv4-name "client_range"
set save-password enable
set psksecret sample
set dpd-retryinterval 60
next
end
b. Configure the branch office FortiGate.
config vpn ipsec phase1-interface
edit "to_HQ"
set interface "port13"
set mode aggressive
set peertype any
set mode-cfg enable
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
set add-route disable
set xauthtype client
set authusr "vpnuser1"
set authpasswd vpnuser1-password
set remote-gw 11.101.1.1
set psksecret sample
next
end
5. Configure the IPsec phase2-interface.
a. Configure the HQ FortiGate:
config vpn ipsec phase2-interface
edit "for_Branch_p2"
set phase1 name "for_Branch"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm
aes256gcm chacha20poly1305
next
end
b. Configure the branch office FortiGate.
config vpn ipsec phase2-interface
edit "to_HQ_p2"
set phase1name "to_HQ"
FortiOS 6.4.2 Administration Guide 1247
Fortinet Inc.
VPN
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm
aes256gcm chacha20poly1305
next
end
6. Configure the static routes on the branch office FortiGate. The blackhole route is important to ensure that IPsec
traffic does not match the default route when the IPsec tunnel is down.
config router static
edit 2
set dst 10.1.100.0 255.255.255.0
set device "to_HQ"
next
edit 3
set dst 10.1.100.0 255.255.255.0
set blackhole enable
set distance 254
next
end
7. Configure the firewall policy to allow the branch office to HQ network flow over the IPsec tunnel. This configuration
only supports traffic from the branch office FortiGate to the HQ FortiGate. Traffic is dropped from the HQ FortiGate
to the branch office FortiGate.
a. Configure the HQ FortiGate.
config firewall policy
edit 1
set name "inbound"
set srcintf "for_Branch"
set dstintf "dmz"
set srcaddr "172.16.101.0"
set dstaddr "10.1.100.0"
set action accept
set schedule "always"
set service "ALL"
next
end
b. Configure the branch office FortiGate.
config firewall policy
edit 1
set name "outbound"
set srcintf "port9"
set dstintf "to_HQ"
set srcaddr "172.16.101.0"
set dstaddr "10.1.100.0"
set action accept
set schedule "always"
set service "ALL"
next
end
8. Run diagnose commands to check the IPsec phase1/phase2 interface status. The diagnose debug
application ike -1 command is the key to troubleshoot why the IPsec tunnel failed to establish.
a. Run the diagnose vpn ike gateway list command on the HQ FortiGate. The system should return the
following:
FortiOS 6.4.2 Administration Guide 1248
Fortinet Inc.
VPN
vd: root/0
name: for_Branch_0
version: 1
interface: wan1 5
addr: 11.101.1.1:500 -> 173.1.1.1:500
created: 1972s ago
xauth-user: vpnuser1
assigned IPv4 address: 10.10.10.1/255.255.255.252
IKE SA: created 1/1 established 1/1 time 10/10/10 ms
IPsec SA: created 1/1 established 1/1 time 0/0/0 ms
id/spi: 184 5b1c59fab2029e43/bf517e686d3943d2
direction: responder
status: established 1972-1972s ago = 10ms
proposal: aes128-sha256
key: 8046488e92499247-fbbb4f6dfa4952d0
lifetime/rekey: 86400/84157
DPD sent/recv: 00000020/00000000
b. Run the diagnose vpn tunnel list command on the HQ FortiGate. The system should return the
following:
list all ipsec tunnel in vd 0
name=for_Branch_0 ver=1 serial=9 11.101.1.1:0->173.1.1.1:0
bound_if=5 lgwy=static/1 tun=intf/0 mode=dial_inst/3 encap=none/208 options
[00d0]=create_dev no-sysctlrgwy-chg
parent=for_Branch index=0
proxyid_num=1 child_num=0 refcnt=12 ilast=8 olast=8 ad=/0
stat: rxp=8 txp=8 rxb=1216 txb=672
dpd: mode=on-idle on=1 idle=60000ms retry=3 count=0 seqno=31
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=for_Branch_p2 proto=0 sa=1 ref=2 serial=1
src: 0:0.0.0.0-255.255.255.255:0
dst: 0:0.0.0.0-255.255.255.255:0
SA: ref=3 options=226 type=00 soft=0 mtu=1438 expire=41297/0B replaywin=2048 seqno=9
esn=0 replaywin_lastseq=00000009 itn=0
life: type=01 bytes=0/0 timeout=43190/43200
dec: spi=747c10c6 esp=aes key=16 278c2430e09e74f1e229108f906603b0
ah=sha1 key=20 21dad76b008d1e8b8e53148a2fcbd013a277974a
enc: spi=ca646448 esp=aes key=16 b7801d125804e3610a556da7caefd765
ah=sha1 key=20 a70164c3094327058bd84c1a0c954ca439709206
dec:pkts/bytes=8/672, enc:pkts/bytes=8/1216
name=for_Branchver=1 serial=6 11.101.1.1:0->0.0.0.0:0
bound_if=5 lgwy=static/1 tun=intf/0 mode=dialup/2 encap=none/16 options[0010]=create_
dev
proxyid_num=0 child_num=1 refcnt=14 ilast=8523 olast=8523 ad=/0
stat: rxp=0 txp=0 rxb=0 txb=0
dpd: mode=on-idle on=0 idle=60000ms retry=3 count=0 seqno=0
natt: mode=none draft=0 interval=0 remote_port=0
run_tally=0
c. Run the diagnose vpn ike gateway list command on the branch office FortiGate. The system should
return the following:
vd: root/0
name: to_HQ
version: 1
interface: port13 42
FortiOS 6.4.2 Administration Guide 1249
Fortinet Inc.
VPN
addr: 173.1.1.1:500 -> 11.101.1.1:500
created: 2016s ago
assigned IPv4 address: 10.10.10.1/255.255.255.252
IKE SA: created 1/1 established 1/1 time 0/0/0 ms
IPsec SA: created 1/1 established 1/1 time 0/0/0 ms
id/spi: 93 5b1c59fab2029e43/bf517e686d3943d2
direction: initiator
status: established 2016-2016s ago = 0ms
proposal: aes128-sha256
key: 8046488e92499247-fbbb4f6dfa4952d0
lifetime/rekey: 86400/84083
DPD sent/recv: 00000000/00000020
d. Run the diagnose vpn tunnel list command on the branch office FortiGate. The system should return
the following:
list all ipsec tunnel in vd 0
name=to_HQver=1 serial=7 173.1.1.1:0->11.101.1.1:0
bound_if=42 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/8 options[0008]=npu
proxyid_num=1 child_num=0 refcnt=13 ilast=18 olast=58 ad=/0
stat: rxp=1 txp=2 rxb=152 txb=168
dpd: mode=on-demand on=1 idle=20000ms retry=3 count=0 seqno=0
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=to_HQ proto=0 sa=1 ref=2 serial=1
src: 0:0.0.0.0/0.0.0.0:0
dst: 0:0.0.0.0/0.0.0.0:0
SA: ref=6 options=10226 type=00 soft=0 mtu=1438 expire=41015/0B replaywin=2048
seqno=3 esn=0 replaywin_lastseq=00000002 itn=0
life: type=01 bytes=0/0 timeout=42898/43200
dec: spi=ca646448 esp=aes key=16 b7801d125804e3610a556da7caefd765
ah=sha1 key=20 a70164c3094327058bd84c1a0c954ca439709206
enc: spi=747c10c6 esp=aes key=16 278c2430e09e74f1e229108f906603b0
ah=sha1 key=20 21dad76b008d1e8b8e53148a2fcbd013a277974a
dec:pkts/bytes=1/84, enc:pkts/bytes=2/304
npu_flag=03 npu_rgwy=11.101.1.1 npu_lgwy=173.1.1.1 npu_selid=5 dec_npuid=2 enc_
npuid=2
FortiClient as dialup client
This is a sample configuration of dialup IPsec VPN with FortiClient as the dialup client.
FortiOS 6.4.2 Administration Guide 1250
Fortinet Inc.
VPN
You can configure dialup IPsec VPN with FortiClient as the dialup client using the GUI or CLI.
If multiple dialup IPsec VPNs are defined for the same dialup server interface, each phase1 configuration must define a
unique peer ID to distinguish the tunnel that the remote client is connecting to. When a client connects, the first IKE
message that is in aggressive mode contains the client's local ID. FortiGate matches the local ID to the dialup tunnel
referencing the same Peer ID, and the connection continues with that tunnel.
To configure IPsec VPN with FortiClient as the dialup client on the GUI:
1. Configure a user and user group.
a. Go to User & Authentication > User Definition to create a local user vpnuser1.
b. Go to User & Authentication > User Groups to create a group vpngroup with the member vpnuser1.
2. Go to VPN > IPsec Wizard and configure the following settings for VPN Setup:
a. Enter a VPN name.
b. For Template Type, select Remote Access.
c. For Remote Device Type, select Client-based > FortiClient.
d. Click Next.
3. Configure the following settings for Authentication:
a. For Incoming Interface, select wan1.
b. For Authentication Method, select Pre-shared Key.
c. In the Pre-shared Key field, enter your-psk as the key.
d. From the User Group dropdown list, select vpngroup.
e. Click Next.
4. Configure the following settings for Policy & Routing:
a. From the Local Interface dropdown menu, select lan.
b. Configure the Local Address as local_network.
c. Configure the Client Address Range as 10.10.2.1-10.10.2.200.
FortiOS 6.4.2 Administration Guide 1251
Fortinet Inc.
VPN
d. Keep the default values for the Subnet Mask, DNS Server, Enable IPv4 Split tunnel, and Allow Endpoint
Registration.
e. Click Next.
5. Adjust the Client Options as needed, then click Create.
6. Optionally, define a unique Peer ID in the phase1 configuration:
a. Go to VPN > IPsec Tunnels and edit the just created tunnel.
b. Click Convert To Custom Tunnel.
c. In the Authentication section, click Edit.
d. Under Peer Options, set Accept Types to Specific peer ID.
e. In the Peer ID field, enter a unique ID, such as dialup1.
f. Click OK.
To configure IPsec VPN with FortiClient as the dialup client using the CLI:
1. In the CLI, configure the user and group.
config user local
edit "vpnuser1"
set type password
set passwd your-password
next
end
config user group
edit "vpngroup"
set member "vpnuser1"
next
end
2. Configure the internal interface. The LAN interface connects to the corporate internal network. Traffic from this
interface routes out the IPsec VPN tunnel. Creating an address group for the protected network behind this
FortiGate causes traffic to this network group to go through the IPsec tunnel.
config system interface
edit "lan"
set vdom "root"
set ip 10.10.111.1 255.255.255.0
next
end
config firewall address
edit "local_subnet_1"
set subnet 10.10.111.0 255.255.255.0
next
edit "local_subnet_2"
set subnet 10.10.112.0 255.255.255.0
next
end
config firewall addrgrp
edit "local_network"
set member "local_subnet_1" "local_subnet_2"
next
end
3. Configure the WAN interface. The WAN interface is the interface connected to the ISP. It can work in static mode
(as shown in this example), DHCP, or PPPoE mode. The IPsec tunnel is established over the WAN interface.
FortiOS 6.4.2 Administration Guide 1252
Fortinet Inc.
VPN
config system interface
edit "wan1"
set vdom "root"
set ip 172.20.120.123 255.255.255.0
next
end
4. Configure the client address pool. You must create a firewall address to assign an IP address to a client from the
address pool.
config firewall address
edit "client_range"
set type iprange
set comment "VPN client range"
set start-ip 10.10.2.1
set end-ip 10.10.2.200
next
end
5. Configure the IPsec phase1-interface. In this example, PSK is used as the authentication method. Signature
authentication is also an option.
config vpn ipsec phase1-interface
edit "for_client"
set type dynamic
set interface "wan1"
set mode aggressive
set peertype one
set peerid "dialup1"
set net-device enable
set mode-cfg enable
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
set dpd on-idle
set xauthtype auto
set authusrgrp "vpngroup"
set assign-ip-from name
set ipv4-name "client_range"
set dns-mode auto
set ipv4-split-include "local_network"
set save-password enable
set psksecret your-psk
set dpd-retryinterval 60
next
end
6. Configure the IPsec phase2-interface.
config vpn ipsec phase2-interface
edit "for_client"
set phase1name "for_client"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm
aes256gcm chacha20poly1305
next
end
7. Configure the firewall policy to allow client traffic flow over the IPsec VPN tunnel.
config firewall policy
edit 1
FortiOS 6.4.2 Administration Guide 1253
Fortinet Inc.
VPN
set name "inbound"
set srcintf "for_client"
set dstintf "lan"
set srcaddr "client_range"
set dstaddr "local_network"
set action accept
set schedule "always"
set service "ALL"
next
end
To configure FortiClient:
1. In FortiClient, go to Remote Access and click Add a new connection.
2. Set the VPN to IPsec VPN and the Remote Gateway to the FortiGate IP address.
3. Set the Authentication Method to Pre-Shared Key and enter the key.
4. Expand Advanced Settings > Phase 1 and in the Local ID field, enter dialup1.
5. Configure remaining settings as needed, then click Save.
6. Select the VPN, enter the username and password, then select Connect.
Diagnose the connection
Run diagnose commands to check the IPsec phase1/phase2 interface status. The diagnose debug application
ike -1 command is the key to troubleshoot why the IPsec tunnel failed to establish.
1. Run the diagnose vpn ike gateway list command. The system should return the following:
vd: root/0
name: for_client_0
version: 1
interface: port1 15
addr: 172.20.120.123:4500 ->172.20.120.254:64916
created: 37s ago
xauth-user: vpnuser1
assigned IPv4 address: 10.10.1.1/255.255.255.255
nat: me peer
IKE SA: created 1/1 established 1/1 time 10/10/10 ms
IPsec SA: created 1/1 established 1/1 time 0/0/0 ms
id/spi: 1 b40a32d878d5e262/8bba553563a498f4
direction: responder
status: established 37-37s ago = 10ms
proposal: aes256-sha256
key: f4ad7ec3a4fcfd09-787e2e9b7bceb9a7-0dfa183240d838ba-41539863e5378381
lifetime/rekey: 86400/86092
DPD sent/recv: 00000000/00000a0e
2. Run the diagnose vpn tunnel list command. The system should return the following:
list all ipsec tunnel in vd 0
=
=
name=for_client_0 ver=1 serial=3 172.20.120.123:4500->172.20.120.254:64916
bound_if=15 lgwy=static/1 tun=intf/0 mode=dial_inst/3 encap=none/984 options
[03d8]=npucreate_dev no-sysctlrgwy-chgrport-chg frag-rfcaccept_traffic=1
parent=for_client index=0
FortiOS 6.4.2 Administration Guide 1254
Fortinet Inc.
VPN
proxyid_num=1 child_num=0 refcnt=12 ilast=3 olast=3 ad=/0
stat: rxp=1 txp=0 rxb=16402 txb=0
dpd: mode=on-idle on=1 idle=20000ms retry=3 count=0 seqno=0
natt: mode=keepalive draft=32 interval=10 remote_port=64916
proxyid=for_client proto=0 sa=1 ref=2 serial=1 add-route
src: 0:0.0.0.0-255.255.255.255:0
dst: 0:10.10.1.1-10.10.1.1:0
SA: ref=4 options=2a6 type=00 soft=0 mtu=1422 expire=42867/0B replaywin=2048
seqno=1 esn=0 replaywin_lastseq=00000001 itn=0
life: type=01 bytes=0/0 timeout=43189/43200
dec: spi=36274d14 esp=aes key=16 e518b84b3c3b667b79f2e61c64a225a6
ah=sha1 key=20 9cceaa544ed042fda800c4fe5d3fd9d8b811984a
enc: spi=8b154deb esp=aes key=16 9d50f004b45c122e4e9fb7af085c457c
ah=sha1 key=20 f1d90b2a311049e23be34967008239637b50a328
dec:pkts/bytes=1/16330, enc:pkts/bytes=0/0
npu_flag=02 npu_rgwy=172.20.120.254 npu_lgwy=172.20.120.123npu_selid=0 dec_npuid=2 enc_
npuid=0
name=for_clientver=1 serial=2 172.20.120.123:0->0.0.0.0:0
bound_if=15 lgwy=static/1 tun=intf/0 mode=dialup/2 encap=none/536 options
[0218]=npucreate_dev frag-rfcaccept_traffic=1
proxyid_num=0 child_num=1 refcnt=11 ilast=350 olast=350 ad=/0
stat: rxp=0 txp=0 rxb=0 txb=0
dpd: mode=on-idle on=0 idle=20000ms retry=3 count=0 seqno=0
natt: mode=none draft=0 interval=0 remote_port=0
Add FortiToken multi-factor authentication
This configuration adds multi-factor authentication (MFA) to the FortiClient dialup VPN configuration (FortiClient as
dialup client on page 1250). It uses one of the two free mobile FortiTokens that is already installed on the FortiGate.
To configure MFA using the GUI:
1. Edit the user:
a. Go to User & Authentication > User Definition and edit local user vpnuser1.
b. Enable Two-factor Authentication and select one mobile Token from the list,
c. Enter the user's Email Address.
d. Enable Send Activation Code and select Email.
e. Click Next and click Submit.
2. Activate the mobile token.
a. When a FortiToken is added to user vpnuser1, an email is sent to the user's email address. Follow the
instructions to install your FortiToken mobile application on your device and activate your token.
To configure MFA using the CLI:
1. Edit the user and user group:
config user local
edit "vpnuser1"
set type password
set two-factor fortitoken
set fortitoken <select mobile token for the option list>
set email-to <user's email address>
FortiOS 6.4.2 Administration Guide 1255
Fortinet Inc.
VPN
set passwd <user's password>
next
end
2. Activate the mobile token.
a. When a FortiToken is added to user vpnuser1, an email is sent to the user's email address. Follow the
instructions to install your FortiToken mobile application on your device and activate your token.
Add LDAP user authentication
This configuration adds LDAP user authentication to the FortiClient dialup VPN configuration (FortiClient as dialup client
on page 1250). You must have already generated and exported a CA certificate from your AD server.
To configure LDAP user authentication using the GUI:
1. Import the CA certificate into FortiGate:
a. Go to System > Certificates.
If the Certificates option is not visible, enable it in Feature Visibility. See Feature visibility on page 821 for
details.
b. Click Import > CA Certificate.
c. Set Type to File.
d. Click Upload then find and select the certificate file.
e. Click OK.
The CA certificate now appears in the list of External CA Certificates. In this example, it is called CA_Cert_1.
f. Optionally, rename the system generated CA_Cert_1 to something more descriptive:
config vpn certificate ca
rename CA_Cert_1 to LDAPS-CA
end
2. Configure the LDAP user:
a. Go to User & Authentication > LDAP Servers and click Create New.
b. Set Name to ldaps-server and specify Server IP/Name.
c. Specify Common Name Identifier and Distinguished Name.
d. Set Bind Type to Regular.
e. Specify Username and Password.
f. Enable Secure Connection and set Protocol to LDAPS.
g. For Certificate, select LDAP server CA LDAPS-CA from the list.
h. Click OK.
3. Add the LDAP user to the user group:
a. Go to User & Authentication > User Groups and edit the vpngroup group.
b. In Remote Groups, click Add to add the ldaps-server remote server.
c. Click OK.
FortiOS 6.4.2 Administration Guide 1256
Fortinet Inc.
VPN
To configure LDAP user authentication using the CLI:
1. Import the CA certificate using the GUI.
2. Configure the LDAP user:
config user ldap
edit "ldaps-server"
set server "172.20.120.161"
set cnid "cn"
set dn "cn=Users,dc=qa,dc=fortinet,dc=com"
set type regular
set username "CN=Administrator,cn=users,DC=qa,DC=fortinet,DC=com"
set password **********
set group-member-check group-object
set secure ldaps
set ca-cert "LDAPS-CA"
set port 636
next
end
3. Add the LDAP user to the user group:
config user group
edit "vpngroup"
append member "ldaps-server"
next
end
iOS device as dialup client
This is a sample configuration of dialup IPsec VPN with an iPhone or iPad as the dialup client.
FortiOS 6.4.2 Administration Guide 1257
Fortinet Inc.
VPN
You can configure dialup IPsec VPN with an iOS device as the dialup client using the GUI or CLI.
To configure IPsec VPN with an iOS device as the dialup client on the GUI:
1. Go to VPN > IPsec Wizard and configure the following settings for VPN Setup:
a. Enter a VPN name.
b. For Template Type, select Remote Access.
c. For Remote Device Type, select Native > iOS Native.
d. For NAT Configuration, set No NAT Between Sites.
e. Click Next.
2. Configure the following settings for Authentication:
a. For Incoming Interface, select wan1.
b. For Authentication Method, select Pre-shared Key.
c. In the Pre-shared Key field, enter your-psk as the key.
d. From the User Group dropdown list, select vpngroup.
e. Deselect Require 'Group Name' on VPN client.
f. Click Next.
3. Configure the following settings for Policy & Routing:
a. From the Local Interface dropdown menu, select lan.
b. Configure the Local Address as local_network.
c. Configure the Client Address Range as 10.10.2.1-10.10.2.200.
d. Keep the default values for the Subnet Mask, DNS Server, and Enable IPv4 Split tunnel.
e. Click Create.
FortiOS 6.4.2 Administration Guide 1258
Fortinet Inc.
VPN
To configure IPsec VPN with an iOS device as the dialup client using the CLI:
1. In the CLI, configure the user and group.
config user local
edit "vpnuser1"
set type password
set passwd your-password
next
end
config user group
edit "vpngroup"
set member "vpnuser1"
next
end
2. Configure the internal interface. The LAN interface connects to the corporate internal network. Traffic from this
interface routes out the IPsec VPN tunnel. Creating an address group for the protected network behind this
FortiGate causes traffic to this network group to go through the IPsec tunnel.
config system interface
edit "lan"
set vdom "root"
set ip 10.10.111.1 255.255.255.0
next
end
config firewall address
edit "local_subnet_1"
set ip 10.10.111.0 255.255.255.0
next
end
config firewall address
edit "local_subnet_2"
set ip 10.10.112.0 255.255.255.0
next
end
config firewall addrgrp
edit "local_network"
set member "local_subnet_1" "local_subnet_2"
next
end
3. Configure the WAN interface. The WAN interface is the interface connected to the ISP. It can work in static mode
(as shown in this example), DHCP, or PPPoE mode. The IPsec tunnel is established over the WAN interface.
config system interface
edit "wan1"
set vdom "root"
set ip 172.20.120.123 255.255.255.0
next
end
4. Configure the client address pool. You must create a firewall address to assign an IP address to a client from the
address pool.
FortiOS 6.4.2 Administration Guide 1259
Fortinet Inc.
VPN
config firewall address
edit "client_range"
set type iprange
set comment "VPN client range"
set start-ip 10.10.2.1
set end-ip 10.10.2.200
next
end
5. Configure the IPsec phase1-interface. In this example, PSK is used as the authentication method. Signature
authentication is also an option.
config vpn ipsec phase1-interface
edit "for_ios_p1"
set type dynamic
set interface "wan1"
set peertype any
set net-device enable
set mode-cfg enable
set proposal aes256-sha256 aes256-md5 aes256-sha1
set dpd on-idle
set dhgrp 14 5 2
set xauthtype auto
set authusrgrp "vpngroup"
set assign-ip-from name
set ipv4-name "client_range"
set dns-mode auto
set ipv4-split-include "local_network"
set psksecret your-psk
set dpd-retryinterval 60
next
end
6. Configure the IPsec phase2-interface.
config vpn ipsec phase2-interface
edit "for_ios_p2"
set phase1name "for_ios_p1"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm
aes256gcm chacha20poly1305
set pfs disable
set keepalive enable
next
end
7. Configure the firewall policy to allow client traffic flow over the IPsec VPN tunnel.
config firewall policy
edit 1
set name "ios_vpn"
set srcintf "for_ios_p1"
set dstintf "lan"
set srcaddr "ios_range"
set dstaddr "local_network"
set action accept
set schedule "always"
set service "ALL"
FortiOS 6.4.2 Administration Guide 1260
Fortinet Inc.
VPN
next
end
8. Configure the iOS device.
a. In the iOS device, go to Settings > General > VPN and select Add VPN Configuration.
b. Set the Type to IPsec and enter a Description. Set the Server to the FortiGate's Internet-facing interface, and
enter the username in Account. Enter the user password, the preshared IPsec VPN secret, then select Done.
c. Ensure that the IPsec VPN configuration is highlighted (indicated by a checkmark), and select the Not
Connected button. The IPsec VPN connects with the user's credentials and secret. The status changes to
Connected, and a VPN icon appears at the top of the screen.
9. Run diagnose commands to check the IPsec phase1/phase2 interface status. The diagnose debug
application ike -1 command is the key to troubleshoot why the IPsec tunnel failed to establish.
a. Run the diagnose vpn ike gateway list command. The system should return the following:
vd: root/0
name: for_ios_p1_0
version: 1
interface: port1 15
addr: 172.20.120.123:4500 -> 172.20.120.254:64916
created: 17s ago
xauth-user: u1
assigned IPv4 address: 10.10.2.1/255.255.255.255
nat: me peer
IKE SA: created 1/1 established 1/1 time 150/150/150 ms
IPsec SA: created 1/1 established 1/1 time 10/10/10 ms
id/spi: 2 3c844e13c75591bf/80c2db92c8d3f602 direction: responder status: established
17-17s ago = 150ms proposal: aes256-sha256 key: 0032ea5ee160d775-51f3bf1f9909101b-
b89c7b5a77a07784-2c92cf9c921801ac lifetime/rekey: 3600/3312 DPD sent/recv:
00000000/00000000
b. Run the diagnose vpn tunnel list command. The system should return the following:
list all ipsec tunnel in vd 0
=
=
name=for_ios_p1_0 ver=1 serial=172.20.120.123:4500->172.20.120.254:64916
bound_if=15 lgwy=static/1 tun=intf/0 mode=dial_inst/3 encap=none/984 options
[03d8]=npu create_dev no-sysctl rgwy-chg rport-chg frag-rfc accept_traffic=1
parent=for_ios_p1 index=0
proxyid_num=1 child_num=0 refcnt=12 ilast=23 olast=23 ad=/0
stat: rxp=0 txp=0 rxb=0 txb=0
dpd: mode=on-idle on=1 idle=60000ms retry=3 count=0 seqno=0
natt: mode=keepalive draft=32 interval=10 remote_port=64916
proxyid=for_ios_p1 proto=0 sa=1 ref=2 serial=1 add-route
src: 0:10.10.111.0-10.10.111.255:0 dst: 0:10.10.2.1-10.10.2.1:0 SA: ref=3 options=a7
type=00 soft=0 mtu=1422 expire=3564/0B replaywin=2048
seqno=1 esn=0 replaywin_lastseq=00000000 itn=0
life: type=01 bytes=0/0 timeout=3587/3600 dec: spi=36274d15 esp=aes key=32
5a599d796f8114c83d6589284f036fc33bdf4456541e2154b4ac2217b6aec869
ah=sha1 key=20 f1efdeb77d6f856a8dd3a30cbc23cb0f8a3e0340
enc: spi=00b0d9ab esp=aes key=32
e9232d7a1c4f390fd09f8409c2d85f80362d940c08c73f245908ab1ac3af322f
ah=sha1 key=20 a3890d6c5320756291cad85026d3a78fd42a1b42
dec:pkts/bytes=0/0, enc:pkts/bytes=0/0 npu_flag=00 npu_rgwy=172.20.120.254 npu_
lgwy=172.20.120.123 npu_selid=1 dec_npuid=0 enc_npuid=0
FortiOS 6.4.2 Administration Guide 1261
Fortinet Inc.
VPN
IPsec VPN with external DHCP service
You can use an external DHCP server to assign IP addresses to your IPsec VPN clients. This is a common scenario
found in enterprises where all DHCP leases need to be managed centrally.
In this example, the DHCP server assigns IP addresses in the range of 172.16.6.100 to 172.16.6.120. The server is
attached to internal2 on the FortiGate and has an IP address of 192.168.3.70.
FortiOS 6.4.2 Administration Guide 1262
Fortinet Inc.
VPN
To configure a DHCP server to assign IP addresses to IPsec VPN clients:
1. Create a user group for remote users:
a. Go to User & Authentication > User Definition and click Create New.
b. For User Type, select Local User.
c. Complete the wizard, and click Submit.
d. Go to User & Authentication > User Groups and click Create New..
e. Create a Firewall user group for your remote users.
f. For Members, add the user you just created.
g. Click OK.
2. Add a firewall address for the local network and IPsec VPN client range:
a. Go to Policy & Objects > Addresses.
b. Create a new Subnet address for the LAN, including the IP mask and local interface (internal2).
FortiOS 6.4.2 Administration Guide 1263
Fortinet Inc.
VPN
c. Click OK.
d. Create a new IP Range address for the IPsec VPN client range (172.16.6.100–172.16.6.120).
e. Click OK.
3. Configure the IPsec VPN using a VPN tunnel in the CLI:
config vpn ipsec phase1-interface
edit "dhcp_vpn"
set type dynamic
set interface "wan1"
set mode aggressive
set peertype any
set net-device disable
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
set dpd on-idle
set dhgrp 5
set xauthtype auto
set authusrgrp "ipsecvpn"
set psksecret **********
set dpd-retryinterval 60
next
end
config vpn ipsec phase2-interface
edit "toclient"
set phase1name "dhcp_vpn"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm
aes256gcm chacha20poly1305
set dhgrp 5
set dhcp-ipsec enable
next
end
FortiOS 6.4.2 Administration Guide 1264
Fortinet Inc.
VPN
4. Configure the IPsec VPN interface:
a. Go to Network > Interfaces and edit the newly created IPsec VPN interface.
b. Enable the DHCP Server.
c. Expand Advanced and change the Mode to Relay.
d. Enter the external DHCP server IP address (192.168.3.70).
e. Change the Type to IPsec.
f. Click OK.
5. Create a security policy for access to the local network:
a. Go to Policy & Objects > Firewall Policy and click Create New.
b. Configure the following parameters:
i. Set the Incoming Interface to the tunnel interface created in step 3 (dhcp_vpn).
ii. Set the Outgoing Interface (internal2).
iii. Set the Source to the IPsec VPN client range defined in step 2 (ipsecvpn_range).
iv. Set the Destination to the subnet address defined in step 2 (Local LAN).
v. Set the Service to ALL.
FortiOS 6.4.2 Administration Guide 1265
Fortinet Inc.
VPN
c. Click OK.
6. Configure FortiClient:
a. In FortiClient, go to REMOTE ACCESS > Add a new connection.
b. Configure the following parameters:
i. Set the VPN type to IPsec VPN.
ii. Enter a connection name.
iii. Set the Remote Gateway to the FortiGate external IP address.
iv. Set the Authentication Method to Pre-shared key and enter the key below.
v. Expand the Advanced Settings > VPN Settings and for Options, select DHCP over IPsec.
FortiOS 6.4.2 Administration Guide 1266
Fortinet Inc.
VPN
vi. Click Save.
c. Select the new connection, and enter the user name and password.
d. Click Connect.
Once the connection is established, the external DHCP server assigns the user an IP address and FortiClient
displays the connection status, including the IP address, connection duration, and bytes sent and received.
Verification
1. In FortiOS, go to Monitor > IPsec Monitor and verify that the tunnel Status is Up.
2. Go to Log & Report > Forward Traffic and verify the Sent / Received column displays the traffic flow through the
tunnel.
FortiOS 6.4.2 Administration Guide 1267
Fortinet Inc.
VPN
L2TP over IPsec
This is an example of L2TP over IPsec.
This example uses a locally defined user for authentication, a Windows PC or Android tablet as the client, and
net-device is set to enable in the phase1-interface settings. If net-device is set to disable, only one device
can establish an L2TP over IPsec tunnel behind the same NAT device.
To configure L2TP over an IPsec tunnel using the GUI:
1. Go to VPN > IPsec Wizard.
2. Enter a VPN Name. In this example, L2tpoIPsec.
3. configure the following settings for VPN Setup:
a. For Template Type, select Remote Access.
b. For Remote Device Type, select Native and Windows Native.
c. Click Next.
FortiOS 6.4.2 Administration Guide 1268
Fortinet Inc.
VPN
4. Configure the following settings for Authentication:
a. For Incoming Interface, select port9.
b. For Authentication Method, select Pre-shared Key.
c. In the Pre-shared Key field, enter your-psk as the key.
d. For User Group, select L2tpusergroup
e. Click Next.
5. Configure the following settings for Policy & Routing:
a. From the Local Interface dropdown menu, select port10.
b. Configure the Local Address as 172.16.101.0.
c. Configure the Client Address Range as 10.10.10.1-10.10.10.100.
d. Leave the Subnet Mask at its default value.
e. Click Create.
To configure L2TP over an IPsec tunnel using the CLI:
1. Configure the WAN interface and static route on HQ.
config system interface
edit "port9"
set alias "WAN"
set ip 22.1.1.1 255.255.255.0
next
edit "port10"
set alias "Internal"
set ip 172.16.101.1 255.255.255.0
next
end
config router static
edit 1
set gateway 22.1.1.2
set device "port9"
next
end
2. Configure IPsec phase1-interface and phase2-interface on HQ.
config vpn ipsec phase1-interface
edit "L2tpoIPsec"
set type dynamic
set interface "port9"
set peertype any
set proposal aes256-md5 3des-sha1 aes192-sha1
set dpd on-idle
set dhgrp 2
set net-device enable
set psksecret sample
set dpd-retryinterval 60
next
end
config vpn ipsec phase2-interface
edit "L2tpoIPsec"
set phase1name "L2tpoIPsec"
set proposal aes256-md5 3des-sha1 aes192-sha1
set pfs disable
FortiOS 6.4.2 Administration Guide 1269
Fortinet Inc.
VPN
set encapsulation transport-mode
set l2tp enable
next
end
3. Configure a user and user group on HQ.
config user local
edit "usera"
set type password
set passwd usera
next
end
config user group
edit "L2tpusergroup"
set member "usera"
next
end
4. Configure L2TP on HQ.
config vpn l2tp
set status enable
set eip 10.10.10.100
set sip 10.10.10.1
set usrgrp "L2tpusergroup"
end
5. Configure a firewall address that is applied in L2TP settings to assign IP addresses to clients once the L2TP tunnel
is established.
config firewall address
edit "L2TPclients"
set type iprange
set start-ip 10.10.10.1
set end-ip 10.10.10.100
next
end
6. Configure a firewall policy.
config firewall policy
edit 1
set name "Bridge_IPsec_port9_for_l2tp negotiation"
set srcintf "L2tpoIPsec"
set dstintf "port9"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "L2TP"
next
edit 2
set srcintf "L2tpoIPsec"
set dstintf "port10"
set srcaddr "L2TPclients"
set dstaddr "172.16.101.0"
set action accept
set schedule "always"
FortiOS 6.4.2 Administration Guide 1270
Fortinet Inc.
VPN
set service "ALL"
set nat enable
next
end
To view the VPN tunnel list on HQ:
# diagnose vpn tunnel list
list all ipsec tunnel in vd 0
----
name=L2tpoIPsec_0 ver=1 serial=8 22.1.1.1:0->10.1.100.15:0
bound_if=4 lgwy=static/1 tun=intf/0 mode=dial_inst/3 encap=none/216 options[00d8]=npu
create_dev no-sysctl rgwy-chg
parent=L2tpoIPsec index=0
proxyid_num=1 child_num=0 refcnt=13 ilast=0 olast=0 ad=/0
stat: rxp=470 txp=267 rxb=57192 txb=12679
dpd: mode=on-idle on=1 idle=60000ms retry=3 count=0 seqno=0
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=L2tpoIPsec proto=17 sa=1 ref=3 serial=1 transport-mode add-route
src: 17:22.1.1.1-22.1.1.1:1701
dst: 17:10.1.100.15-10.1.100.15:0
SA: ref=3 options=1a6 type=00 soft=0 mtu=1470 expire=2339/0B replaywin=2048
seqno=10c esn=0 replaywin_lastseq=000001d6 itn=0
life: type=01 bytes=0/0 timeout=3585/3600
dec: spi=ca646443 esp=3des key=24 af62a0fffe85d3d534b5bfba29307aafc8bfda5c3f4650dc
ah=sha1 key=20 89b4b67688bed9be49fb86449bb83f8c8d8d7432
enc: spi=700d28a0 esp=3des key=24 5f68906eca8d37d853814188b9e29ac4913420a9c87362c9
ah=sha1 key=20 d37f901ffd0e6ee1e4fdccebc7fdcc7ad44f0a0a
dec:pkts/bytes=470/31698, enc:pkts/bytes=267/21744
npu_flag=00 npu_rgwy=10.1.100.15 npu_lgwy=22.1.1.1 npu_selid=6 dec_npuid=0 enc_npuid=0
----
name=L2tpoIPsec_1 ver=1 serial=a 22.1.1.1:4500->22.1.1.2:64916
bound_if=4 lgwy=static/1 tun=intf/0 mode=dial_inst/3 encap=none/472 options[01d8]=npu
create_dev no-sysctl rgwy-chg rport-chg
parent=L2tpoIPsec index=1
proxyid_num=1 child_num=0 refcnt=17 ilast=2 olast=2 ad=/0
stat: rxp=5 txp=4 rxb=592 txb=249
dpd: mode=on-idle on=1 idle=60000ms retry=3 count=0 seqno=0
natt: mode=keepalive draft=32 interval=10 remote_port=64916
proxyid=L2tpoIPsec proto=17 sa=1 ref=3 serial=1 transport-mode add-route
src: 17:22.1.1.1-22.1.1.1:1701
dst: 17:22.1.1.2-22.1.1.2:0
SA: ref=3 options=1a6 type=00 soft=0 mtu=1454 expire=28786/0B replaywin=2048
seqno=5 esn=0 replaywin_lastseq=00000005 itn=0
life: type=01 bytes=0/0 timeout=28790/28800
dec: spi=ca646446 esp=aes key=32
ea60dfbad709b3c63917c3b7299520ff7606756ca15d2eb7cbff349b6562172e
ah=md5 key=16 2f2acfff0b556935d0aab8fc5725c8ec
enc: spi=0b514df2 esp=aes key=32
a8a92c2ed0e1fd7b6e405d8a6b9eb3be5eff573d80be3f830ce694917d634196
ah=md5 key=16 e426c33a7fe9041bdc5ce802760e8a3d
dec:pkts/bytes=5/245, enc:pkts/bytes=4/464
npu_flag=00 npu_rgwy=22.1.1.2 npu_lgwy=22.1.1.1 npu_selid=8 dec_npuid=0 enc_npuid=0
FortiOS 6.4.2 Administration Guide 1271
Fortinet Inc.
VPN
To view the L2TP VPN status:
# diagnose debug enable
# diagnose vpn l2tp status
----
----
HQ # Num of tunnels: 2
----
Tunnel ID = 1 (local id), 42 (remote id) to 10.1.100.15:1701
control_seq_num = 2, control_rec_seq_num = 4,
last recv pkt = 2
Call ID = 1 (local id), 1 (remote id), serno = 0, dev=ppp1,
assigned ip = 10.10.10.2
data_seq_num = 0,
tx = 152 bytes (2), rx= 21179 bytes (205)
Tunnel ID = 3 (local id), 34183 (remote id) to 22.1.1.2:58825
control_seq_num = 2, control_rec_seq_num = 4,
last recv pkt = 2
Call ID = 3 (local id), 18820 (remote id), serno = 2032472593, dev=ppp2,
assigned ip = 10.10.10.3
data_seq_num = 0,
tx = 152 bytes (2), rx= 0 bytes (0)
----
--VD 0: Startip = 10.10.10.1, Endip = 10.10.10.100
enforece-ipsec = false
----
Tunneled Internet browsing
This is a sample configuration of tunneled internet browsing using a dialup VPN. To centralize network management and
control, all branch office traffic is tunneled to HQ, including Internet browsing.
FortiOS 6.4.2 Administration Guide 1272
Fortinet Inc.
VPN
To configure a dialup VPN to tunnel Internet browsing using the GUI:
1. Configure the dialup VPN server FortiGate at HQ:
a. Go to VPN > IPsec Wizard and configure the following settings for VPN Setup:
i. Enter a VPN name, in this example, HQ.
ii. For Template Type, select Site to Site.
iii. For Remote Device Type, select FortiGate.
iv. For NAT Configuration, select The remote site is behind NAT.
v. Click Next.
b. Configure the following settings for Authentication:
i. For Incoming Interface, select port9.
ii. For Authentication Method, select Pre-shared Key.
iii. In the Pre-shared Key field, enter sample as the key.
iv. Click Next.
c. Configure the following settings for Policy & Routing:
i. From the Local Interface dropdown menu, select port10.
ii. Configure the Local Subnets as 172.16.101.0.
iii. Configure the Remote Subnets as 0.0.0.0/0.
iv. For Internet Access, select Share Local.
v. For Shared WAN, select port9.
vi. Click Create.
2. Configure the dialup VPN client FortiGate at a branch:
a. Go to VPN > IPsec Wizard and configure the following settings for VPN Setup:
i. Enter a VPN name, in this example, Branch1 or Branch2.
ii. For Template Type, select Site to Site.
iii. For Remote Device Type, select FortiGate.
iv. For NAT Configuration, select The remote site is behind NAT.
v. Click Next.
b. Configure the following settings for Authentication:
i. For IP Address, select Remote Device and enter 22.1.1.1.
ii. For Outgoing Interface, select wan1.
iii. For Authentication Method, select Pre-shared Key.
iv. In the Pre-shared Key field, enter sample as the key.
v. Click Next.
c. Configure the following settings for Policy & Routing:
i. From the Local Interface dropdown menu, select internal.
ii. Configure the Local Subnets as 10.1.100.0/192.1684.0.
iii. Configure the Remote Subnets as 0.0.0.0/0.
iv. For Internet Access, select Use Remote.
v. Configure the Local Gateway to 15.1.1.1/13.1.1.1.
vi. Click Create.
FortiOS 6.4.2 Administration Guide 1273
Fortinet Inc.
VPN
To configure a dialup VPN to tunnel Internet browsing using the CLI:
1. Configure the WAN interface and static route on the FortiGate at HQ.
config system interface
edit "port9"
set alias "WAN"
set ip 22.1.1.1 255.255.255.0
next
edit "port10"
set alias "Internal"
set ip 172.16.101.1 255.255.255.0
next
end
config router static
edit 1
set gateway 22.1.1.2
set device "port9"
next
end
2. Configure IPsec phase1-interface and phase2-interface configuration at HQ.
config vpn ipsec phase1-interface
edit "HQ"
set type dynamic
set interface "port9"
set peertype any
set net-device enable
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
set dpd on-idle
set psksecret sample
set dpd-retryinterval 60
next
end
config vpn ipsec phase2-interface
edit "HQ"
set phase1name "HQ"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm
aes256gcm chacha20poly1305
next
end
3. Configure the firewall policy at HQ.
config firewall policy
edit 1
set srcintf "HQ"
set dstintf "port9" "port10"
set srcaddr "10.1.100.0" "192.168.4.0"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set nat enable
next
end
FortiOS 6.4.2 Administration Guide 1274
Fortinet Inc.
VPN
4. Configure the WAN interface and static route on the FortiGate at the branches.
a. Branch1.
config system interface
edit "wan1"
set ip 15.1.1.2 255.255.255.0
next
edit "internal"
set ip 10.1.100.1 255.255.255.0
next
end
config router static
edit 1
set gateway 15.1.1.1
set device "wan1"
next
end
b. Branch2.
config system interface
edit "wan1"
set ip 13.1.1.2 255.255.255.0
next
edit "internal"
set ip 192.168.4.1 255.255.255.0
next
end
config router static
edit 1
set gateway 13.1.1.1
set device "wan1"
next
end
5. Configure IPsec phase1-interface and phase2-interface configuration at the branches.
a. Branch1.
config vpn ipsec phase1-interface
edit "branch1"
set interface "wan1"
set peertype any
set net-device enable
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
set dpd on-idle
set remote-gw 22.1.1.1
set psksecret sample
set dpd-retryinterval 5
next
end
config vpn ipsec phase2-interface
edit "branch1"
set phase1name "branch1"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm
aes256gcm chacha20poly1305
set auto-negotiate enable
set src-subnet 10.1.100.0 255.255.255.0
FortiOS 6.4.2 Administration Guide 1275
Fortinet Inc.
VPN
next
end
b. Branch2.
config vpn ipsec phase1-interface
edit "branch2"
set interface "wan1"
set peertype any
set net-device enable
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
set dpd on-idle
set remote-gw 22.1.1.1
set psksecret sample
set dpd-retryinterval 5
next
end
config vpn ipsec phase2-interface
edit "branch2"
set phase1name "branch2"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm
aes256gcm chacha20poly1305
set auto-negotiate enable
set src-subnet 192.168.4.0 255.255.255.0
next
end
6. Configure the firewall policy at the branches.
a. Branch1.
config firewall policy
edit 1
set name "outbound"
set srcintf "internal"
set dstintf "branch1"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
next
edit 2
set name "inbound"
set srcintf "branch1"
set dstintf "internal"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
next
end
b. Branch2.
config firewall policy
edit 1
set name "outbound"
FortiOS 6.4.2 Administration Guide 1276
Fortinet Inc.
VPN
set srcintf "internal"
set dstintf "branch2"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
next
edit 2
set name "inbound"
set srcintf "branch2"
set dstintf "internal"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
next
end
7. Configure the static routes at the branches.
a. Branch1.
config router static
edit 2
set dst 22.1.1.1/32
set gateway 15.1.1.1
set device "wan1"
set distance 1
next
edit 3
set device "branch1"
set distance 5
next
end
b. Branch2.
config router static
edit 2
set dst 22.1.1.1/32
set gateway 13.1.1.1
set device "wan1"
set distance 1
next
edit 3
set device "branch2"
set distance 5
next
end
8. Optionally, view the VPN tunnel list on a branch with the diagnose vpn tunnel list command:
list all ipsec tunnel in vd 0
----
name=branch1 ver=1 serial=2 15.1.1.2:0->22.1.1.1:0
bound_if=7 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/536 options[0218]=npu create_
dev frag-rfc accept_traffic=1
FortiOS 6.4.2 Administration Guide 1277
Fortinet Inc.
VPN
proxyid_num=1 child_num=1 refcnt=19 ilast=0 olast=0 ad=r/2
stat: rxp=1 txp=1661 rxb=65470 txb=167314
dpd: mode=on-idle on=1 idle=5000ms retry=3 count=0 seqno=2986
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=branch1 proto=0 sa=1 ref=5 serial=1 auto-negotiate adr
src: 0:0.0.0.0/0.0.0.0:0
dst: 0:0.0.0.0/0.0.0.0:0
SA: ref=6 options=1a227 type=00 soft=0 mtu=1438 expire=697/0B replaywin=1024
seqno=13a esn=0 replaywin_lastseq=00000000 itn=0
life: type=01 bytes=0/0 timeout=2368/2400
dec: spi=c53a8f7e esp=aes key=16 ecee0cd48664d903d3d6822b1f902fd2
ah=sha1 key=20 2440a189126c222093ca9acd8b37127285f1f8a7
enc: spi=6e3636fe esp=aes key=16 fdaa20bcc96f74ae9885e824d3efa29d
ah=sha1 key=20 70c0891c769ad8007ea1f31a39978ffbc73242d0
dec:pkts/bytes=0/16348, enc:pkts/bytes=313/55962
npu_flag=03 npu_rgwy=22.1.1.1 npu_lgwy=15.1.1.2 npu_selid=1 dec_npuid=1 enc_npuid=1
9. Optionally, view static routing table on a branch with the get router info routing-table static
command:
Routing table for VRF=0
S* 0.0.0.0/0 [5/0] is directly connected, branch1
S* 22.1.1.1/32 [1/0] via 15.1.1.1, wan1
Aggregate and redundant VPN
The following topics provide instructions on configuring aggregate and redundant VPNs:
l OSPF with IPsec VPN for network redundancy on page 1278
l IPsec VPN in an HA environment on page 1286
l Adding IPsec aggregate members in the GUI on page 1291
l Represent multiple IPsec tunnels as a single interface on page 1294
l IPsec aggregate for redundancy and traffic load-balancing on page 1295
l Per packet distribution and tunnel aggregation on page 1301
l Redundant hub and spoke VPN on page 1305
l Weighted round robin for IPsec aggregate tunnels on page 1311
OSPF with IPsec VPN for network redundancy
This is a sample configuration of using OSPF with IPsec VPN to set up network redundancy. Route selection is based on
OSPF cost calculation. You can configure ECMP or primary/secondary routes by adjusting OSPF path cost.
FortiOS 6.4.2 Administration Guide 1278
Fortinet Inc.
VPN
Because the GUI can only complete part of the configuration, we recommend using the CLI.
To configure OSPF with IPsec VPN to achieve network redundancy using the CLI:
1. Configure the WAN interface and static route.
Each FortiGate has two WAN interfaces connected to different ISPs. The ISP1 link is for the primary FortiGate and
the IPS2 link is for the secondary FortiGate.
a. Configure HQ1.
config system interface
edit "port1"
set alias to_ISP1
set ip 172.16.200.1 255.255.255.0
next
edit "port2"
set alias to_ISP2
set ip 172.17.200.1 255.255.255.0
next
end
config router static
edit 1
set gateway 172.16.200.3
set device "port1"
next
edit 2
set gateway 172.17.200.3
set device "port2"
set priority 100
next
end
b. Configure HQ2.
config system interface
edit "port25"
set alias to_ISP1
set ip 172.16.202.1 255.255.255.0
next
edit "port26"
set alias to_ISP2
set ip 172.17.202.1 255.255.255.0
next
end
config router static
edit 1
FortiOS 6.4.2 Administration Guide 1279
Fortinet Inc.
VPN
set gateway 172.16.202.2
set device "port25"
next
edit 2
set gateway 172.17.202.2
set device "port26"
set priority 100
next
end
2. Configure the internal (protected subnet) interface.
a. Configure HQ1.
config system interface
edit "dmz"
set ip 10.1.100.1 255.255.255.0
next
end
b. Configure HQ2.
config system interface
edit "port9"
set ip 172.16.101.1 255.255.255.0
next
end
3. Configure IPsec phase1-interface and phase-2 interface. On each FortiGate, configure two IPsec tunnels: a primary
and a secondary.
a. Configure HQ1.
config vpn ipsec phase1-interface
edit "pri_HQ2"
set interface "port1"
set peertype any
set net-device enable
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
set remote-gw 172.16.202.1
set psksecret sample1
next
edit "sec_HQ2"
set interface "port2"
set peertype any
set net-device enable
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
set remote-gw 172.17.202.1
set psksecret sample2
next
end
config vpn ipsec phase2-interface
edit "pri_HQ2"
set phase1name "pri_HQ2"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm
aes256gcm chacha20poly1305
set auto-negotiate enable
next
edit "sec_HQ2"
set phase1name "sec_HQ2"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm
aes256gcm chacha20poly1305
set auto-negotiate enable
next
FortiOS 6.4.2 Administration Guide 1280
Fortinet Inc.
VPN
end
b. Configure HQ2.
config vpn ipsec phase1-interface
edit "pri_HQ1"
set interface "port25"
set peertype any
set net-device enable
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
set remote-gw 172.16.200.1
set psksecret sample1
next
edit "sec_HQ1"
set interface "port26"
set peertype any
set net-device enable
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
set remote-gw 172.17.200.1
set psksecret sample2
next
end
config vpn ipsec phase2-interface
edit "pri_HQ1"
set phase1name "pri_HQ1"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm
aes256gcm chacha20poly1305
set auto-negotiate enable
next
edit "sec_HQ1"
set phase1name "sec_HQ1"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm
aes256gcm chacha20poly1305
set auto-negotiate enable
next
end
4. Configure an inbound and outbound firewall policy for each IPsec tunnel.
a. Configure HQ1.
config firewall policy
edit 1
set name "pri_inbound"
set srcintf "pri_HQ2"
set dstintf "dmz"
set srcaddr "172.16.101.0"
set dstaddr "10.1.100.0"
set action accept
set schedule "always"
set service "ALL"
next
edit 2
set name "pri_outbound"
set srcintf "dmz"
set dstintf "pri_HQ2"
set srcaddr "10.1.100.0"
set dstaddr "172.16.101.0"
set action accept
set schedule "always"
set service "ALL"
FortiOS 6.4.2 Administration Guide 1281
Fortinet Inc.
VPN
next
edit 3
set name "sec_inbound"
set srcintf "sec_HQ2"
set dstintf "dmz"
set srcaddr "172.16.101.0"
set dstaddr "10.1.100.0"
set action accept
set schedule "always"
set service "ALL"
next
edit 4
set name "sec_outbound"
set srcintf "dmz"
set dstintf "sec_HQ2"
set srcaddr "10.1.100.0"
set dstaddr "172.16.101.0"
set action accept
set schedule "always"
set service "ALL"
next
end
b. Configure HQ2.
config firewall policy
edit 1
set name "pri_inbound"
set srcintf "pri_HQ1"
set dstintf "port9"
set srcaddr "10.1.100.0"
set dstaddr "172.16.101.0"
set action accept
set schedule "always"
set service "ALL"
next
edit 2
set name "pri_outbound"
set srcintf "port9"
set dstintf "pri_HQ1"
set srcaddr "10.1.100.0"
set dstaddr "172.16.101.0"
set action accept
set schedule "always"
set service "ALL"
next
edit 3
set name "sec_inbound"
set srcintf "sec_HQ1"
set dstintf "port9"
set srcaddr "10.1.100.0"
set dstaddr "172.16.101.0"
set action accept
set schedule "always"
set service "ALL"
next
edit 4
set name "sec_outbound"
set srcintf "port9"
FortiOS 6.4.2 Administration Guide 1282
Fortinet Inc.
VPN
set dstintf "sec_HQ1"
set srcaddr "172.16.101.0"
set dstaddr "10.1.100.0"
set action accept
set schedule "always"
set service "ALL"
next
end
5. Assign an IP address to the IPsec tunnel interface.
a. Configure HQ1.
config system interface
edit "pri_HQ2"
set ip 10.10.10.1 255.255.255.255
set remote-ip 10.10.10.2 255.255.255.255
next
edit "sec_HQ2"
set ip 10.10.11.1 255.255.255.255
set remote-ip 10.10.11.2 255.255.255.255
next
end
b. Configure HQ2.
config system interface
edit "pri_HQ1"
set ip 10.10.10.2 255.255.255.255
set remote-ip 10.10.10.1 255.255.255.255
next
edit "sec_HQ1"
set ip 10.10.11.2 255.255.255.255
set remote-ip 10.10.11.1 255.255.255.255
next
end
6. Configure OSPF.
a. Configure HQ1.
config router ospf
set router-id 1.1.1.1
config area
edit 0.0.0.0
next
end
config ospf-interface
edit "pri_HQ2"
set interface "pri_HQ2"
set cost 10
set network-type point-to-point
next
edit "sec_HQ2"
set interface "sec_HQ2"
set cost 20
set network-type point-to-point
next
end
config network
edit 1
set prefix 10.10.10.0 255.255.255.0
next
edit 2
FortiOS 6.4.2 Administration Guide 1283
Fortinet Inc.
VPN
set prefix 10.10.11.0 255.255.255.0
next
edit 3
set prefix 10.1.100.0 255.255.255.0
next
end
end
b. Configure HQ2.
config router ospf
set router-id 2.2.2.2
config area
edit 0.0.0.0
next
end
config ospf-interface
edit "pri_HQ1"
set interface "pri_HQ1"
set cost 10
set network-type point-to-point
next
edit "sec_HQ1"
set interface "sec_HQ1"
set cost 20
set network-type point-to-point
next
end
config network
edit 1
set prefix 10.10.10.0 255.255.255.0
next
edit 2
set prefix 10.10.11.0 255.255.255.0
next
edit 3
set prefix 172.16.101.0 255.255.255.0
next
end
end
To check VPN and OSPF states using diagnose and get commands:
1. Run the HQ1 # diagnose vpn ike gateway list command. The system should return the following:
vd: root/0
name: pri_HQ2
version: 1
interface: port1 11
addr: 172.16.200.1:500 -> 172.16.202.1:500
virtual-interface-addr: 10.10.10.1 -> 10.10.10.2
created: 1024s ago
IKE SA: created 1/1 established 1/1 time 0/0/0 ms
IPsec SA: created 1/3 established 1/2 time 0/5/10 ms
id/spi: 45 d184777257b4e692/e2432f834aaf5658 direction: responder status: established
1024-1024s ago = 0ms proposal: aes128-sha256 key: 9ed41fb06c983344-
189538046f5ad204 lifetime/rekey: 86400/85105 DPD sent/recv: 00000003/00000000
vd: root/0
name: sec_HQ2
FortiOS 6.4.2 Administration Guide 1284
Fortinet Inc.
VPN
version: 1
interface: port2 12
addr: 172.17.200.1:500 -> 172.17.202.1:500
virtual-interface-addr: 10.10.11.1 -> 10.10.11.2
created: 346s ago
IKE SA: created 1/1 established 1/1 time 0/0/0 ms
IPsec SA: created 1/1 established 1/1 time 0/10/15 ms
id/spi: 48 d909ed68636b1ea5/163015e73ea050b8 direction: initiator status: established
0-0s ago = 0ms proposal: aes128-sha256 key: b9e93c156bdf4562-29db9fbafa256152
lifetime/rekey: 86400/86099 DPD sent/recv: 00000000/00000000
2. Run the HQ1 # diagnose vpn tunnel list command. The system should return the following:
list all ipsec tunnel in vd 0
name=pri_HQ2 ver=1 serial=1 172.16.200.1:0->172.16.202.1:0
bound_if=11 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/528 options[0210]=create_dev
frag-rfc accept_traffic=1
proxyid_num=1 child_num=0 refcnt=14 ilast=2 olast=2 ad=/0
stat: rxp=102 txp=105 rxb=14064 txb=7816
dpd: mode=on-demand on=1 idle=20000ms retry=3 count=0 seqno=3
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=pri_HQ2 proto=0 sa=1 ref=2 serial=1 auto-negotiate
src: 0:0.0.0.0/0.0.0.0:0 dst: 0:0.0.0.0/0.0.0.0:0 SA: ref=3 options=18227 type=00
soft=0 mtu=1438 expire=42254/0B replaywin=2048
seqno=6a esn=0 replaywin_lastseq=00000067 itn=0
life: type=01 bytes=0/0 timeout=42932/43200 dec: spi=1071b4ee esp=aes key=16
032036b24a4ec88da63896b86f3a01db
ah=sha1 key=20 3962933e24c8da21c65c13bc2c6345d643199cdf
enc: spi=ec89b7e3 esp=aes key=16 92b1d85ef91faf695fca05843dd91626
ah=sha1 key=20 2de99d1376506313d9f32df6873902cf6c08e454
dec:pkts/bytes=102/7164, enc:pkts/bytes=105/14936
name=sec_HQ2 ver=1 serial=2 172.17.200.1:0->172.17.202.1:0
bound_if=12 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/528 options[0210]=create_dev
frag-rfc accept_traffic=1
proxyid_num=1 child_num=0 refcnt=14 ilast=3 olast=0 ad=/0
stat: rxp=110 txp=114 rxb=15152 txb=8428
dpd: mode=on-demand on=1 idle=20000ms retry=3 count=0 seqno=3
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=sec_HQ2 proto=0 sa=1 ref=2 serial=1 auto-negotiate
src: 0:0.0.0.0/0.0.0.0:0 dst: 0:0.0.0.0/0.0.0.0:0 SA: ref=3 options=18227 type=00
soft=0 mtu=1438 expire=42927/0B replaywin=2048
seqno=2 esn=0 replaywin_lastseq=00000002 itn=0
life: type=01 bytes=0/0 timeout=42931/43200 dec: spi=1071b4ef esp=aes key=16
bcdcabdb7d1c7c695d1f2e0f5441700a
ah=sha1 key=20 e7a0034589f82eb1af41efd59d0b2565fef8d5da
enc: spi=ec89b7e4 esp=aes key=16 234240b69e61f6bdee2b4cdec0f33bea
ah=sha1 key=20 f9d4744a84d91e5ce05f5984737c2a691a3627e8
dec:pkts/bytes=1/68, enc:pkts/bytes=1/136
3. Run the HQ1 # get router info ospf neighbor command. The system should return the following:
OSPF process 0, VRF 0:
Neighbor ID Pri State Dead Time Address Interface
2.2.2.2 1. Full/ - 00:00:37 10.10.10.2 pri_HQ2
2.2.2.2 1. Full/ - 00:00:32 10.10.11.2 sec_HQ2
4. Run the HQ1 # get router info routing-table ospf command. The system should return the following:
Routing table for VRF=0
O 172.16.101.0/24 [110/20] via 10.10.10.2, pri_HQ2 , 00:03:21
In case the primary tunnel is down after route convergence.
FortiOS 6.4.2 Administration Guide 1285
Fortinet Inc.
VPN
5. Run the HQ1 # get router info routing-table ospf command. The system should return the following:
Routing table for VRF=0
O 172.16.101.0/24 [110/110] via 10.10.11.2, sec_HQ2 , 00:00:01
IPsec VPN in an HA environment
This is a sample configuration of site-to-site IPsec VPN in an HA environment.
For this example, set up HA as described in the HA topics. When setting up HA, enable the following options to ensure
IPsec VPN traffic is not interrupted during an HA failover:
l session-pickup under HA settings.
l ha-sync-esp-seqno under IPsec phase1-interface settings.
You can configure IPsec VPN in an HA environment using the GUI or CLI.
In this example, the VPN name for HQ1 is "to_HQ2", and the VPN name for HQ2 is "to_HQ1".
To configure IPsec VPN in an HA environment in the GUI:
1. Set up IPsec VPN on HQ1 (the HA cluster):
a. Go to VPN > IPsec Wizard and configure the following settings for VPN Setup:
i. Enter a VPN name.
ii. For Template Type, select Site to Site.
iii. For Remote Device Type, select FortiGate.
iv. For NAT Configuration, set No NAT between sites.
v. Click Next.
b. Configure the following settings for Authentication:
i. For Remote Device, select IP Address.
ii. In the IP address field, enter 172.16.202.1.
iii. For Outgoing Interface, select port1.
iv. For Authentication Method, select Pre-shared Key.
v. In the Pre-shared Key field, enter an example key.
vi. Click Next.
c. Configure the following settings for Policy & Routing:
i. From the Local Interface dropdown menu, select the local interface.
ii. Configure the Local Subnets as 10.1.100.0/24.
iii. Configure the Remote Subnets as 172.16.101.0/24.
iv. Click Create.
FortiOS 6.4.2 Administration Guide 1286
Fortinet Inc.
VPN
2. Set up IPsec VPN on HQ2:
a. Go to VPN > IPsec Wizard and configure the following settings for VPN Setup:
i. Enter a VPN name.
ii. For Template Type, select Site to Site.
iii. For Remote Device Type, select FortiGate.
iv. For NAT Configuration, set No NAT between sites.
v. Click Next.
b. Configure the following settings for Authentication:
i. For Remote Device, select IP Address.
ii. In the IP address field, enter 172.16.200.1.
iii. For Outgoing Interface, select port13.
iv. For Authentication Method, select Pre-shared Key.
v. In the Pre-shared Key field, enter an example key.
vi. Click Next.
c. Configure the following settings for Policy & Routing:
i. From the Local Interface dropdown menu, select the desired local interface. In this example, it is port9.
ii. Configure the Local Subnets as 172.16.101.0.
iii. Configure the Remote Subnets as 10.1.100.0
iv. Click Create.
To configure IPsec VPN in an HA environment using the CLI:
1. Configure HA. In this example, two FortiGates work in active-passive mode. The HA heartbeat interfaces are WAN1
and WAN2:
config system ha
set group-name "FGT-HA"
set mode a-p
set password sample
set hbdev "wan1" 50 "wan2" 50
set session-pickup enable
set priority 200
set override-wait-time 10
end
2. Configure the WAN interface and default route. The WAN interface is the interface connected to the ISP. It can work
in static mode (as shown in this example), DHCP, or PPPoE mode. The IPsec tunnel is established over the
WAN interface.
a. Configure HQ1:
config system interface
edit "port1"
set vdom "root"
set ip 172.16.200.1 255.255.255.0
next
end
config router static
edit 1
set gateway 172.16.200.3
set device "port1"
next
end
b. Configure HQ2:
config system interface
FortiOS 6.4.2 Administration Guide 1287
Fortinet Inc.
VPN
edit "port25"
set vdom "root"
set ip 172.16.202.1 255.255.255.0
next
end
config router static
edit 1
set gateway 172.16.202.2
set device "port25"
next
end
3. Configure the internal (protected subnet) interface. The internal interface connects to the corporate internal
network. Traffic from this interface routes out the IPsec VPN tunnel.
a. Configure HQ1:
config system interface
edit "dmz"
set vdom "root"
set ip 10.1.100.1 255.255.255.0
next
end
b. Configure HQ2:
config system interface
edit "port9"
set vdom "root"
set ip 172.16.101.1 255.255.255.0
next
end
4. Configure the IPsec phase1-interface. This example uses PSK as the authentication method. You can also use
signature authentication.
a. Configure HQ1:
config vpn ipsec phase1-interface
edit "to_HQ2"
set interface "port1"
set peertype any
set net-device enable
set ha-sync-esp-seqno enable
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
set remote-gw 172.16.202.1
set psksecret sample
next
end
b. Configure HQ2:
config vpn ipsec phase1-interface
edit "to_HQ1"
set interface "port25"
set peertype any
set net-device enable
set ha-sync-esp-seqno enable
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
set remote-gw 172.16.200.1
set psksecret sample
next
5. Configure the IPsec phase2-interface:
a. Configure HQ1:
config vpn ipsec phase2-interface
FortiOS 6.4.2 Administration Guide 1288
Fortinet Inc.
VPN
edit "to_HQ2"
set phase1name "to_HQ2"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm
aes256gcm chacha20poly1305
set auto-negotiate enable
next
end
b. Configure HQ2:
config vpn ipsec phase2-interface
edit "to_HQ1"
set phase1name "to_HQ1"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm
aes256gcm chacha20poly1305
set auto-negotiate enable
next
end
6. Configure static routes. Two static routes are added to reach the remote protected subnet. The blackhole route is
important to ensure IPsec traffic does not match the default route when the IPsec tunnel is down.
a. Configure HQ1:
config router static
edit 2
set dst 172.16.101.0 255.255.255.0
set device "to_HQ2"
next
edit 3
set dst 172.16.101.0 255.255.255.0
set blackhole enable
set distance 254
next
end
b. Configure HQ2:
config router static
edit 2
set dst 10.1.100.0 255.255.255.0
set device "to_HQ1"
next
edit 3
set dst 10.1.100.0 255.255.255.0
set blackhole enable
set distance 254
next
end
7. Configure two firewall policies to allow bi-directional IPsec traffic flow over the IPsec tunnel:
a. Configure HQ1:
config firewall policy
edit 1
set name "inbound"
set srcintf "to_HQ2"
set dstintf "dmz"
set srcaddr "172.16.101.0"
set dstaddr "10.1.100.0"
set action accept
set schedule "always"
set service "ALL"
next
FortiOS 6.4.2 Administration Guide 1289
Fortinet Inc.
VPN
edit 2
set name "outbound"
set srcintf "dmz"
set dstintf "to_HQ2"
set srcaddr "10.1.100.0"
set dstaddr "172.16.101.0"
set action accept
set schedule "always"
set service "ALL"
next
end
b. Configure HQ2:
config firewall policy
edit 1
set name "inbound"
set srcintf "to_HQ1"
set dstintf "port9"
set srcaddr "10.1.100.0"
set dstaddr "172.16.101.0"
set action accept
set schedule "always"
set service "ALL"
next
edit 2
set name "outbound"
set srcintf "port9"
set dstintf "to_HQ1"
set srcaddr "172.16.101.0"
set dstaddr "10.1.100.0"
set action accept
set schedule "always"
set service "ALL"
next
end
8. Use the following diagnose commands to check IPsec phase1/phase2 interface status including the sequence
number on the secondary FortiGate. The diagnose debug application ike -1 command is the key to
troubleshoot why the IPsec tunnel failed to establish.
a. Run the HQ1 # diagnose vpn ike gateway list command. The system should return the following:
vd: root/0
name: to_HQ2
version: 1
interface: port1 11
addr: 172.16.200.1:500 -> 172.16.202.1:500
created: 5s ago
IKE SA: created 1/1 established 1/1 time 0/0/0 ms
IPsec SA: created 2/2 established 2/2 time 0/0/0 ms
id/spi: 12 6e8d0532e7fe8d84/3694ac323138a024 direction: responder status:
established 5-5s ago = 0ms proposal: aes128-sha256 key: b3efb46d0d385aff-
7bb9ee241362ee8d lifetime/rekey: 86400/86124 DPD sent/recv: 00000000/00000000
b. Run the HQ1 # diagnose vpn tunnel list command. The system should return the following:
list all ipsec tunnel in vd 0
name=to_HQ2 ver=1 serial=1 172.16.200.1:0->172.16.202.1:0
bound_if=11 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/528 options[0210]=create_
dev frag-rfc accept_traffic=1
proxyid_num=1 child_num=0 refcnt=11 ilast=7 olast=87 ad=/0
FortiOS 6.4.2 Administration Guide 1290
Fortinet Inc.
VPN
stat: rxp=0 txp=0 rxb=0 txb=0
dpd: mode=on-demand on=1 idle=20000ms retry=3 count=0 seqno=0
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=to_HQ2 proto=0 sa=1 ref=2 serial=1 auto-negotiate
src: 0:0.0.0.0/0.0.0.0:0 dst: 0:0.0.0.0/0.0.0.0:0 SA: ref=3 options=18227 type=00
soft=0 mtu=1438 expire=42927/0B replaywin=2048
seqno=1 esn=0 replaywin_lastseq=00000000 itn=0
life: type=01 bytes=0/0 timeout=42930/43200 dec: spi=ef9ca700 esp=aes key=16
a2c6584bf654d4f956497b3436f1cfc7
ah=sha1 key=20 82c5e734bce81e6f18418328e2a11aeb7baa021b
enc: spi=791e898e esp=aes key=16 0dbb4588ba2665c6962491e85a4a8d5a
ah=sha1 key=20 2054b318d2568a8b12119120f20ecac97ab730b3
dec:pkts/bytes=0/0, enc:pkts/bytes=0/0
ESP seqno synced to primary FortiGate every five minutes, and big gap between primary and secondary to
ensure that no packet is dropped after HA failover caused by tcp-replay. Check ESP sequence number synced
on secondary FortiGate.
c. Run the HQ1 # execute ha manage 0 admin command.
d. Run the HQ1-Sec # diagnose vpn tunnel list command. The system should return the following:
list all ipsec tunnel in vd 0
name=to_HQ2 ver=1 serial=1 172.16.200.1:0->172.16.202.1:0
bound_if=11 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/528 options[0210]=create_
dev frag-rfc accept_traffic=1
proxyid_num=1 child_num=0 refcnt=11 ilast=13 olast=274 ad=/0
stat: rxp=0 txp=0 rxb=0 txb=0
dpd: mode=on-demand on=1 idle=20000ms retry=3 count=0 seqno=0
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=to_HQ2 proto=0 sa=1 ref=2 serial=1 auto-negotiate
src: 0:0.0.0.0/0.0.0.0:0 dst: 0:0.0.0.0/0.0.0.0:0 SA: ref=3 options=27 type=00
soft=0 mtu=1280 expire=42740/0B replaywin=2048
seqno=47868c01 esn=0 replaywin_lastseq=00000000 itn=0
life: type=01 bytes=0/0 timeout=42930/43200 dec: spi=ef9ca700 esp=aes key=16
a2c6584bf654d4f956497b3436f1cfc7
ah=sha1 key=20 82c5e734bce81e6f18418328e2a11aeb7baa021b
enc: spi=791e898e esp=aes key=16 0dbb4588ba2665c6962491e85a4a8d5a
ah=sha1 key=20 2054b318d2568a8b12119120f20ecac97ab730b3
dec:pkts/bytes=0/0, enc:pkts/bytes=0/0
Adding IPsec aggregate members in the GUI
You can configure the Device creation and Aggregate member settings in the VPN Creation Wizard so that a tunnel can
be an IPsec aggregate member candidate. You can create a new IPsec aggregate within the IPsec tunnels dropdown
list. You can also monitor the traffic for each aggregate member.
To configure an IPsec tunnel with aggregate members in the GUI:
1. Create the IPsec aggregate tunnel candidate:
a. Go to VPN > IPsec Wizard.
b. Enter the tunnel name.
c. Set Template Type to Custom, then click Next.
FortiOS 6.4.2 Administration Guide 1291
Fortinet Inc.
VPN
d. In the Network section, expand the Advanced field and enable Aggregate member.
e. Configure the other settings as needed.
f. Click OK.
2. Repeat step 1 to create more tunnel candidates as needed.
3. Create the IPsec aggregate:
a. Go to VPN > IPsec Tunnels and click Create New > IPsec Aggregate.
b. Enter an aggregate name.
c. Select a load balancing algorithm. The options include: Weighted Round Robin (default), L3, L4, and
Redundant. Round-robin is available in the CLI.
d. Add the tunnels that you created in steps 1 and 2. If required, enter weights for each tunnel.
e. Click OK.
4. Configure the firewall policy:
a. Go to Policy & Objects > Firewall Policy.
b. Create a new policy or edit an existing policy.
FortiOS 6.4.2 Administration Guide 1292
Fortinet Inc.
VPN
c. Set Incoming Interface to the aggregate tunnel created in step 3.
d. Configure the other settings as needed.
e. Click OK.
5. Configure the static route:
a. Go to Network > Static Routes.
b. Click Create New > IPv4 Static Route.
c. Set Interface to the IPsec aggregate tunnel.
d. Configure the other settings as needed.
e. Click OK.
6. Monitor the traffic:
a. Go to Monitor > IPsec Monitor.
b. Expand the IPsec aggregate tunnel (agg-tunnel) to view statistics for each aggregate member.
FortiOS 6.4.2 Administration Guide 1293
Fortinet Inc.
VPN
Represent multiple IPsec tunnels as a single interface
Use this function to create a static aggregate interface using IPsec tunnels as members, with traffic load balanced
between the members. You can assign an IP address to the aggregate interface, dynamic routing can run on the
interface, and the interface can be a member interface in SD-WAN.
The supported load balancing algorithms are: L3, L4, round-robin (default), and redundant.
To configure multiple IPsec tunnels as a single interface :
1. Create a site to site VPN phase1 interface with net-device disabled:
config vpn ipsec phase1-interface
edit tunnel1
set interface port1
set net-device disable
set remote-ge 172.16.100.1
set psksecret sample
next
edit tunnel2
set interface port2
set net-device disable
set remote-ge 172.31.1.1
set psksecret sample
next
end
2. Configure IPsec aggregation:
config system ipsec-aggregate
edit agg1
set member tunnel1 tunnel2
next
end
3. Configure a firewall policy:
config firewall policy
edit 0
set srcaddr all
set srcintf port10
set dstaddr all
set dstintf agg1
set schedule always
set action accept
set service ALL
next
end
FortiOS 6.4.2 Administration Guide 1294
Fortinet Inc.
VPN
4. Configure a static route:
config router static
edit 0
set device agg1
next
end
To debug the IPsec aggregation list:
#diagnose sys ipsec-aggregate list
agg1 algo=RR member=2 run_tally=2
members:
tunnel1
tunnel2
IPsec aggregate for redundancy and traffic load-balancing
This is a sample configuration of using IPsec aggregate to set up redundancy and traffic load-balancing. The the
following options are available:
l Multiple site-to-site IPsec VPN (net-device disable) tunnel interfaces as member of ipsec-aggregate.
l The supported load balancing algorithms are: L3, L4, round-robin (default), and redundant.
Because the GUI can only complete part of the configuration, we recommend using the CLI.
To configure IPsec aggregate to achieve redundancy and traffic load-balancing using the CLI:
1. Configure the WAN interface and static route. Each FortiGate has two WAN interfaces connected to different ISPs.
The ISP1 link is for the primary FortiGate and the IPS2 link is for the secondary FortiGate.
a. Configure HQ1.
config system interface
edit "port1"
set alias to_ISP1
set ip 172.16.200.1 255.255.255.0
next
edit "port2"
set alias to_ISP2
set ip 172.17.200.1 255.255.255.0
next
end
config router static
FortiOS 6.4.2 Administration Guide 1295
Fortinet Inc.
VPN
edit 1
set gateway 172.16.200.3
set device "port1"
next
edit 2
set gateway 172.17.200.3
set device "port2"
set priority 100
next
end
b. Configure HQ2.
config system interface
edit "port25"
set alias to_ISP1
set ip 172.16.202.1 255.255.255.0
next
edit "port26"
set alias to_ISP2
set ip 172.17.202.1 255.255.255.0
next
end
config router static
edit 1
set gateway 172.16.202.2
set device "port25"
next
edit 2
set gateway 172.17.202.2
set device "port26"
set priority 100
next
end
2. Configure the internal (protected subnet) interface.
a. Configure HQ1.
config system interface
edit "dmz"
set ip 10.1.100.1 255.255.255.0
next
end
b. Configure HQ2.
config system interface
edit "port9"
set ip 172.16.101.1 255.255.255.0
next
end
3. Configure the IPsec phase-1 and phase-2 interfaces. On each FortiGate, configure two site-to-site phase-1
interfaces with net-device disable.
a. Configure HQ1.
config vpn ipsec phase1-interface
edit "pri_HQ2"
set interface "port1"
set peertype any
set net-device disable
set aggregate-member enable
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
FortiOS 6.4.2 Administration Guide 1296
Fortinet Inc.
VPN
set remote-gw 172.16.202.1
set psksecret sample1
next
edit "sec_HQ2"
set interface "port2"
set peertype any
set net-device disable
set aggregate-member enable
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
set remote-gw 172.17.202.1
set psksecret sample2
next
end
config vpn ipsec phase2-interface
edit "pri_HQ2"
set phase1name "pri_HQ2"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm
aes256gcm chacha20poly1305
set auto-negotiate enable
next
edit "sec_HQ2"
set phase1name "sec_HQ2"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm
aes256gcm chacha20poly1305
set auto-negotiate enable
next
end
b. Configure HQ2.
config vpn ipsec phase1-interface
edit "pri_HQ1"
set interface "port25"
set peertype any
set net-device disable
set aggregate-member enable
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
set remote-gw 172.16.200.1
set psksecret sample1
next
edit "sec_HQ1"
set interface "port26"
set peertype any
set net-device disable
set aggregate-member enable
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
set remote-gw 172.17.200.1
set psksecret sample2
next
end
config vpn ipsec phase2-interface
edit "pri_HQ1"
set phase1name "pri_HQ1"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm
aes256gcm chacha20poly1305
set auto-negotiate enable
next
edit "sec_HQ1"
set phase1name "sec_HQ1"
FortiOS 6.4.2 Administration Guide 1297
Fortinet Inc.
VPN
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm
aes256gcm chacha20poly1305
set auto-negotiate enable
next
end
4. Configure ipsec-aggregate.
a. Configure HQ1.
config system ipsec-aggregate
edit "agg_HQ2"
set member "pri_HQ2" "sec_HQ2"
next
end
b. Configure HQ2.
config system ipsec-aggregate
edit "agg_HQ1"
set member "pri_HQ" "sec_HQ1"
next
end
5. Configure the firewall policy.
a. Configure HQ1.
config firewall policy
edit 1
set name "inbound"
set srcintf "agg_HQ2"
set dstintf "dmz"
set srcaddr "172.16.101.0"
set dstaddr "10.1.100.0"
set action accept
set schedule "always"
set service "ALL"
next
edit 2
set name "outbound"
set srcintf "dmz"
set dstintf "agg_HQ2"
set srcaddr "10.1.100.0"
set dstaddr "172.16.101.0"
set action accept
set schedule "always"
set service "ALL"
next
end
b. Configure HQ2.
config firewall policy
edit 1
set name "inbound"
set srcintf "agg_HQ1"
set dstintf "port9"
set srcaddr "10.1.100.0"
set dstaddr "172.16.101.0"
set action accept
set schedule "always"
set service "ALL"
next
edit 2
FortiOS 6.4.2 Administration Guide 1298
Fortinet Inc.
VPN
set name "outbound"
set srcintf "port9"
set dstintf "agg_HQ1"
set srcaddr "172.16.101.0"
set dstaddr "10.1.100.0"
set action accept
set schedule "always"
set service "ALL"
next
end
6. Assign an IP address to the ipsec-aggregate interface. In this example, OSPF runs over the ipsec-
aggregate interface. No IP address is required for the static route HQ1.
a. Configure HQ1.
config system interface
edit "agg_HQ2"
set ip 10.10.10.1 255.255.255.255
set remote-ip 10.10.10.2 255.255.255.255
next
end
b. Configure HQ2.
config system interface
edit "agg_HQ1"
set ip 10.10.10.2 255.255.255.255
set remote-ip 10.10.10.1 255.255.255.255
next
end
7. Configure OSPF.
a. Configure HQ1.
config router ospf
set router-id 1.1.1.1
config area
edit 0.0.0.0
next
end
config network
edit 1
set prefix 10.1.100.0 255.255.255.0
next
edit 2
set prefix 10.10.10.0 255.255.255.0
next
end
end
b. Configure HQ2.
config router ospf
set router-id 2.2.2.2
config area
edit 0.0.0.0
next
end
config network
edit 1
set prefix 172.16.101.0 255.255.255.0
next
edit 2
FortiOS 6.4.2 Administration Guide 1299
Fortinet Inc.
VPN
set prefix 10.10.10.0 255.255.255.0
next
end
end
8. Run diagnose commands.
a. Run the diagnose vpn ike gateway list command. The system should return the following:
vd: root/0
name: pri_HQ2
version: 1
interface: port1 11
addr: 172.16.200.1:500 -> 172.16.202.1:500
created: 1520s ago
IKE SA: created 1/2 established 1/1 time 10/10/10 ms
IPsec SA: created 2/2 established 1/1 time 0/0/0 ms
id/spi: 173 dcdede154681579b/e32f4c48c4349fc0 direction: responder status:
established 1498-1498s ago = 10ms proposal: aes128-sha256 key:
d7230a68d7b83def-588b94495cfa9d38 lifetime/rekey: 86400/84631 DPD sent/recv:
0000000d/00000006
vd: root/0
name: sec_HQ2
version: 1
interface: port2 12
addr: 172.17.200.1:500 -> 172.17.202.1:500
created: 1520s ago
IKE SA: created 1/2 established 1/1 time 10/10/10 ms
IPsec SA: created 2/2 established 1/1 time 0/0/0 ms
id/spi: 174 a567bd7bf02a04b5/4251b6254660aee2 direction: responder status:
established 1498-1498s ago = 10ms proposal: aes128-sha256 key:
9f44f500c28d8de6-febaae9d1e6a164c lifetime/rekey: 86400/84631 DPD sent/recv:
00000008/0000000c
b. Run the diagnose vpn tunnel list command. The system should return the following:
list all ipsec tunnel in vd 0
name=sec_HQ2 ver=1 serial=2 172.17.200.1:0->172.17.202.1:0
bound_if=5 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/512 options[0200]=frag-rfc
run_state=1 accept_traffic=1
proxyid_num=1 child_num=0 refcnt=7 ilast=5 olast=5 ad=/0
stat: rxp=39 txp=40 rxb=5448 txb=2732
dpd: mode=on-demand on=1 idle=20000ms retry=3 count=0 seqno=15
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=sec_HQ2 proto=0 sa=1 ref=2 serial=2 auto-negotiate
src: 0:0.0.0.0/0.0.0.0:0 dst: 0:0.0.0.0/0.0.0.0:0 SA: ref=3 options=18227 type=00
soft=0 mtu=1438 expire=41230/0B replaywin=2048
seqno=29 esn=0 replaywin_lastseq=00000028 itn=0
life: type=01 bytes=0/0 timeout=42899/43200 dec: spi=1071b4f9 esp=aes key=16
1f4dbb78bea8e97650b52d8170b5ece7
ah=sha1 key=20 cd9bf2de0f49296cf489dd915d7baf6d78bc8f12
enc: spi=ec89b7ee esp=aes key=16 0546efecd0d1b9ba5944f635896e4404
ah=sha1 key=20 34599bc7dc25e1ce63ac9615bd50928ce0667dc8
dec:pkts/bytes=39/2796, enc:pkts/bytes=40/5456
name=pri_HQ2 ver=1 serial=1 172.16.200.1:0->172.16.202.1:0
bound_if=11 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/512 options[0200]=frag-
rfc run_state=1 accept_traffic=1
proxyid_num=1 child_num=0 refcnt=5 ilast=15 olast=15 ad=/0
stat: rxp=38 txp=39 rxb=5152 txb=2768
dpd: mode=on-demand on=1 idle=20000ms retry=3 count=0 seqno=20
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=pri_HQ2 proto=0 sa=1 ref=2 serial=2 auto-negotiate
FortiOS 6.4.2 Administration Guide 1300
Fortinet Inc.
VPN
src: 0:0.0.0.0/0.0.0.0:0 dst: 0:0.0.0.0/0.0.0.0:0 SA: ref=3 options=18227 type=00
soft=0 mtu=1438 expire=41231/0B replaywin=2048
seqno=28 esn=0 replaywin_lastseq=00000027 itn=0
life: type=01 bytes=0/0 timeout=42900/43200 dec: spi=1071b4f8 esp=aes key=16
142cce377b3432ba41e64128ade6848c
ah=sha1 key=20 20e64947e2397123f561584321adc0e7aa0c342d
enc: spi=ec89b7ed esp=aes key=16 2ec13622fd60dacce3d28ebe5fe7ab14
ah=sha1 key=20 c1787497508a87f40c73c0db0e835c70b3c3f42d
dec:pkts/bytes=38/2568, enc:pkts/bytes=39/5432
c. Run the diagnose sys ipsec-aggregate list command. The system should return the following:
agg_HQ2 algo=RR member=2 run_tally=2
members:
pri_HQ2
sec_HQ2
d. Run the get router info ospf neighbor command. The system should return the following:
OSPF process 0, VRF 0:
Neighbor ID Pri State Dead Time Address Interface
2.2.2.2 1. Full/ - 00:00:34 10.10.10.2 agg1_HQ2
e. Run the get router info routing-table ospf command. The system should return the following:
Routing table for VRF=0
O 172.16.101.0/24 [110/20] via 10.10.10.2, agg1_HQ2 , 00:18:43
Per packet distribution and tunnel aggregation
This is a sample configuration of aggregating IPsec tunnels by using per-packet load-balancing.
This feature only allows static and DDNS tunnels to be members.
Dynamic (dialup) tunnels are not allowed because dialup instances tend to have different
locations and hence different routing. This conflicts with the rule that all the members of an
aggregate must have the same routing.
For example, a customer has two ISP connections, wan1 and wan2. On each FortiGate, two IPsec VPN interfaces are
created. Next, an ipsec-aggregate interface is created and added as an SD-WAN member.
Configuring FortiGate 1
To create two IPsec VPN interfaces:
config vpn ipsec phase1-interface
edit "vd1-p1"
set interface "wan1"
set peertype any
FortiOS 6.4.2 Administration Guide 1301
Fortinet Inc.
VPN
set net-device disable
set aggregate-member enable
set proposal aes256-sha256
set dhgrp 14
set remote-gw 172.16.201.2
set psksecret ftnt1234
next
edit "vd1-p2"
set interface "wan2"
set peertype any
set net-device disable
set aggregate-member enable
set proposal aes256-sha256
set dhgrp 14
set remote-gw 172.16.202.2
set psksecret ftnt1234
next
end
config vpn ipsec phase2-interface
edit "vd1-p1"
set phase1name "vd1-p1"
next
edit "vd1-p2"
set phase1name "vd1-p2"
next
end
To create an IPsec aggregate interface:
config system ipsec-aggregate
edit "agg1"
set member "vd1-p1" "vd1-p2"
set algorithm L3
next
end
config system interface
edit "agg1"
set vdom "root"
set ip 172.16.11.1 255.255.255.255
set allowaccess ping
set remote-ip 172.16.11.2 255.255.255.255
end
To configure the firewall policy:
config firewall policy
edit 1
set name "1"
set srcintf "dmz"
set dstintf ""virtual-wan-link""
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
FortiOS 6.4.2 Administration Guide 1302
Fortinet Inc.
VPN
set nat enable
next
end
To configure SD-WAN:
config system sdwan
set status enable
config members
edit 1
set interface "agg1"
set gateway 172.16.11.2
next
end
end
Configuring FortiGate 2
To create two IPsec VPN interfaces:
config vpn ipsec phase1-interface
edit "vd2-p1"
set interface "wan1"
set peertype any
set net-device disable
set proposal aes256-sha256
set dhgrp 14
set remote-gw 172.16.200.1
set psksecret ftnt1234
next
edit "vd2-p2"
set interface "wan2"
set peertype any
set net-device disable
set proposal aes256-sha256
set dhgrp 14
set remote-gw 172.16.203.1
set psksecret ftnt1234
next
end
config vpn ipsec phase2-interface
edit "vd2-p1"
set phase1name "vd2-p1"
next
edit "vd2-p2"
set phase1name "vd2-p2"
next
end
To create an IPsec aggregate interface:
config system ipsec-aggregate
edit "agg2"
set member "vd2-p1" "vd2-p2"
FortiOS 6.4.2 Administration Guide 1303
Fortinet Inc.
VPN
set algorithm L3
next
end
config system interface
edit "agg2"
set vdom "root"
set ip 172.16.11.2 255.255.255.255
set allowaccess ping
set remote-ip 172.16.11.1 255.255.255.255
next
end
To configure the firewall policy:
config firewall policy
edit 1
set name "1"
set srcintf "dmz"
set dstintf ""virtual-wan-link""
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set nat enable
next
end
To configure SD-WAN:
config system sdwan
set status enable
config members
edit 1
set interface "agg2"
set gateway 172.16.11.1
next
end
end
Related diagnose commands
To display aggregate IPsec members:
# diagnose sys ipsec-aggregate list
agg1 algo=L3 member=2 run_tally=2
members:
vd1-p1
vd1-p2
To check the VPN status:
# diagnose vpn tunnel list
list all ipsec tunnel in vd 0
FortiOS 6.4.2 Administration Guide 1304
Fortinet Inc.
VPN
------------------------------------------------------
name=vd1-p1 ver=1 serial=2 172.16.200.1:0->172.16.201.2:0 dst_mtu=0
bound_if=10 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/520 options[0208]=npu frag-rfc
run_state=1 accept_traffic=0
proxyid_num=1 child_num=0 refcnt=5 ilast=15 olast=676 ad=/0
stat: rxp=0 txp=0 rxb=0 txb=0
dpd: mode=on-demand on=1 idle=20000ms retry=3 count=0 seqno=0
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=vd1-p1 proto=0 sa=0 ref=1 serial=1
src: 0:0.0.0.0/0.0.0.0:0
dst: 0:0.0.0.0/0.0.0.0:0
------------------------------------------------------
name=vd1-p2 ver=1 serial=3 172.16.203.1:0->172.16.202.2:0 dst_mtu=1500
bound_if=28 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/520 options[0208]=npu frag-rfc
run_state=1 accept_traffic=1
proxyid_num=1 child_num=0 refcnt=12 ilast=1 olast=1 ad=/0
stat: rxp=1 txp=1686 rxb=16602 txb=111717
dpd: mode=on-demand on=1 idle=20000ms retry=3 count=0 seqno=0
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=vd1-p2 proto=0 sa=1 ref=9 serial=1
src: 0:0.0.0.0/0.0.0.0:0
dst: 0:0.0.0.0/0.0.0.0:0
SA: ref=4 options=10226 type=00 soft=0 mtu=1438 expire=42164/0B replaywin=2048
seqno=697 esn=0 replaywin_lastseq=00000002 itn=0 qat=0
life: type=01 bytes=0/0 timeout=42902/43200
dec: spi=f6ae9f83 esp=aes key=16 f6855c72295e3c5c49646530e6b96002
ah=sha1 key=20 f983430d6c161d0a4cd9007c7ae057f1ff011334
enc: spi=8c72ba1a esp=aes key=16 6330f8c532a6ca5c5765f6a9a6034427
ah=sha1 key=20 e5fe385ed5f0f6a33f1d507601b15743a8c70187
dec:pkts/bytes=1/16536, enc:pkts/bytes=1686/223872
npu_flag=02 npu_rgwy=172.16.202.2 npu_lgwy=172.16.203.1 npu_selid=2 dec_npuid=1 enc_
npuid=0
Redundant hub and spoke VPN
A redundant hub and spoke configuration allows VPN connections to radiate from a central FortiGate unit (the hub) to
multiple remote peers (the spokes). Traffic can pass between private networks behind the hub and private networks
behind the remote peers. Traffic can also pass between remote peer private networks through the hub.
This is a sample configuration of hub and spoke IPsec VPN. The following applies for this scenario:
l The spokes have two WAN interfaces and two IPsec VPN tunnels for redundancy.
l The secondary VPN tunnel is up only when the primary tunnel is down by dead peer detection.
FortiOS 6.4.2 Administration Guide 1305
Fortinet Inc.
VPN
Because the GUI can only complete part of the configuration, we recommend using the CLI.
To configure redundant hub and spoke VPN using the FortiOS CLI:
1. Configure the hub.
a. Configure the WAN, internal interface, and static route.
config system interface
edit "port13"
set alias "WAN"
set ip 172.16.202.1 255.255.255.0
next
edit "port9"
set alias "Internal"
set ip 172.16.101.1 255.255.255.0
next
end
config router static
edit 1
set gateway 172.16.202.2
set device "port13"
next
end
b. Configure the IPsec phase1-interface and phase2-interface.
config vpn ipsec phase1-interface
edit "hub"
set type dynamic
set interface "port13"
set peertype any
set net-device enable
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
set dpd on-idle
set psksecret sample
set dpd-retryinterval 60
next
end
config vpn ipsec phase2-interface
edit "hub"
set phase1name "hub"
FortiOS 6.4.2 Administration Guide 1306
Fortinet Inc.
VPN
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm
aes256gcm chacha20poly1305
next
end
c. Configure the firewall policy.
config firewall policy
edit 1
set name "spoke-hub"
set srcintf "hub"
set dstintf "port9"
set srcaddr "all"
set dstaddr "172.16.101.0"
set action accept
set schedule "always"
set service "ALL"
next
edit 2
set name "spoke-spoke"
set srcintf "hub"
set dstintf "hub"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
next
end
2. Configure the spokes.
a. Configure the WAN, internal interface, and static route.
i. Configure Spoke1.
config system interface
edit "port1"
set ip 172.16.200.1 255.255.255.0
next
edit "wan1"
set mode dhcp
set distance 10
set priority 100
next
edit "dmz"
set ip 10.1.100.1 255.255.255.0
next
end
config router static
edit 1
set gateway 172.16.200.2
set device "port1"
next
end
ii. Configure Spoke2.
config system interface
edit "wan1"
set ip 172.16.200.3 255.255.255.0
next
edit "wan2"
set mode dhcp
FortiOS 6.4.2 Administration Guide 1307
Fortinet Inc.
VPN
set distance 10
set priority 100
next
edit "lan1"
set ip 192.168.4.1 255.255.255.0
next
end
config router static
edit 1
set gateway 172.16.200.2
set device "wan1"
next
end
b. Configure IPsec phase1-interface and phase2-interface.
i. Configure Spoke1.
config vpn ipsec phase1-interface
edit "primary"
set interface "port1"
set peertype any
set net-device enable
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
set remote-gw 172.16.202.1
set psksecret sample
next
edit "secondary"
set interface "wan1"
set peertype any
set net-device enable
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
set remote-gw 172.16.202.1
set monitor "primary"
set psksecret sample
next
end
config vpn ipsec phase2-interface
edit "primary"
set phase1name "primary"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm
aes256gcm chacha20poly1305
set auto-negotiate enable
set src-subnet 10.1.100.0 255.255.255.0
next
edit "secondary"
set phase1name "secondary"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm
aes256gcm chacha20poly1305
set auto-negotiate enable
set src-subnet 10.1.100.0 255.255.255.0
next
end
ii. Configure Spoke2.
config vpn ipsec phase1-interface
edit "primary"
set interface "wan1"
set peertype any
set net-device enable
FortiOS 6.4.2 Administration Guide 1308
Fortinet Inc.
VPN
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
set remote-gw 172.16.202.1
set psksecret sample
next
edit "secondary"
set interface "wan2"
set peertype any
set net-device enable
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
set remote-gw 172.16.202.1
set monitor "primary"
set psksecret sample
next
end
config vpn ipsec phase2-interface
edit "primary"
set phase1name "primary"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm
aes256gcm chacha20poly1305
set auto-negotiate enable
set src-subnet 192.168.4.0 255.255.255.0
next
edit "secondary"
set phase1name "secondary"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm
aes256gcm chacha20poly1305
set auto-negotiate enable
set src-subnet 192.168.4.0 255.255.255.0
next
end
c. Configure the firewall policy.
i. Configure Spoke1.
config firewall policy
edit 1
set srcintf "dmz"
set dstintf "primary" "secondary"
set srcaddr "10.1.100.0"
set dstaddr "172.16.101.0"
set action accept
set schedule "always"
set service "ALL"
next
end
ii. Configure Spoke2.
config firewall policy
edit 1
set srcintf "lan1"
set dstintf "primary" "secondary"
set srcaddr "192.168.4.0"
set dstaddr "172.16.101.0"
set action accept
set schedule "always"
set service "ALL"
next
end
FortiOS 6.4.2 Administration Guide 1309
Fortinet Inc.
VPN
d. Configure the static route.
i. Configure Spoke1.
config router static
edit 3
set dst 172.16.101.0 255.255.255.0
set distance 1
set device "primary"
next
edit 4
set dst 172.16.101.0 255.255.255.0
set distance 3
set device "secondary"
next
end
ii. Configure Spoke2.
config router static
edit 3
set dst 172.16.101.0 255.255.255.0
set distance 1
set device "primary"
next
edit 4
set dst 172.16.101.0 255.255.255.0
set distance 3
set device "secondary"
next
end
3. Run diagnose and get commands.
a. Run the Spoke1 # diagnose vpn tunnel list command. The system should return the following:
name=primary ver=1 serial=1 172.16.200.1:0->172.16.202.1:0
bound_if=11 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/528 options[0210]=create_
dev frag-rfc accept_traffic=1
proxyid_num=1 child_num=0 refcnt=15 ilast=0 olast=0 ad=/0
stat: rxp=1879 txp=1881 rxb=225480 txb=112860
dpd: mode=on-demand on=1 idle=20000ms retry=3 count=0 seqno=1
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=primary proto=0 sa=1 ref=2 serial=2 auto-negotiate
src: 0:10.1.100.0/255.255.255.0:0 dst: 0:0.0.0.0/0.0.0.0:0 SA: ref=3 options=18227
type=00 soft=0 mtu=1438 expire=41002/0B replaywin=2048
seqno=758 esn=0 replaywin_lastseq=00000758 itn=0
life: type=01 bytes=0/0 timeout=42901/43200 dec: spi=0908732f esp=aes key=16
20770dfe67ea22dd8ec32c44d84ef4d5
ah=sha1 key=20 edc89fc2ec06309ba13de95e7e486f9b795b8707
enc: spi=a1d9eed1 esp=aes key=16 8eeea2526fba062e680d941083c8b5d1
ah=sha1 key=20 f0f5deaf88b2a69046c3154e9f751739b3f411f5
dec:pkts/bytes=1879/112740, enc:pkts/bytes=1879/225480
name=secondary ver=1 serial=2 172.17.200.1:0->172.16.202.1:0
bound_if=5 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/528 options[0210]=create_
dev frag-rfc accept_traffic=0
proxyid_num=1 child_num=0 refcnt=10 ilast=1892 olast=1892 ad=/0
stat: rxp=0 txp=0 rxb=0 txb=0
dpd: mode=on-demand on=0 idle=20000ms retry=3 count=0 seqno=0
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=secondary proto=0 sa=0 ref=2 serial=2 auto-negotiate
src: 0:10.1.100.0/255.255.255.0:0 dst: 0:0.0.0.0/0.0.0.0:0
FortiOS 6.4.2 Administration Guide 1310
Fortinet Inc.
VPN
b. Run the Spoke1 # get router info routing-table static command. The system should return
the following:
Routing table for VRF=0
................
S 172.16.101.0/24 [1/0] is directly connected, primary
Weighted round robin for IPsec aggregate tunnels
A weighted round robin algorithm can be used for IPsec aggregate tunnels to distribute traffic by the weight of each
member tunnel.
In this example, the FortiGate has two IPsec tunnels put into IPsec aggregate. Traffic is distributed among the members,
with one third over tunnel1, and two thirds over tunnel2. To achieve this, the weighted round robin algorithm is selected,
tunnel1 is assigned a weight of 10, and tunnel2 is assigned a weight of 20.
To create the IPsec aggregate in the GUI:
1. Create the tunnel1 and tunnel2 custom IPsec tunnels. Ensure that Aggregate member is Enabled for each tunnel.
2. Go to VPN > IPsec Tunnels and click Create New > IPsec Aggregate.
3. Enter a name for the aggregate, such as agg1, and ensure that Algorithm is Weighted Round Robin.
4. Add tunnel1 as an aggregate members, and set Weight to 10.
FortiOS 6.4.2 Administration Guide 1311
Fortinet Inc.
VPN
5. Add tunnel2 as a second aggregate members, and set its Weight to 20.
6. Click OK.
7. To view and monitor the aggregate tunnel statistics, go to the IPsec widget on the Network dashboard.
To create the IPsec aggregate in the CLI:
1. Create the tunnel1 and tunnel2 custom IPsec tunnels with aggregate-member enabled and aggregate-weight set
for both tunnels:
config vpn ipsec phase1-interface
edit "tunnel1"
...
set aggregate-member enable
set aggregate-weight 10
...
next
edit "tunnel2"
...
set aggregate-member enable
set aggregate-weight 20
...
next
end
2. Create the IPsec aggregate:
config system ipsec-aggregate
edit "agg1"
set member "tunnel1" "tunnel2"
set algorithm weighted-round-robin
next
end
FortiOS 6.4.2 Administration Guide 1312
Fortinet Inc.
VPN
Overlay Controller VPN (OCVPN)
Overlay Controller VPN (OCVPN) is a cloud based solution to simplify IPsec VPN setup. When OCVPN is enabled,
IPsec phase1-interfaces, phase2-interfaces, static routes, and firewall policies are generated automatically on all
FortiGates that belong to the same community network. A community network is defined as all FortiGates registered to
FortiCare using the same FortiCare account.
If the network topology changes on any FortiGates in the community (such as changing a public IP address in DHCP
mode, adding or removing protected subnets, failing over in dual WAN), the IPsec-related configuration for all devices is
updated with Cloud assistance in self-learning mode. No intervention is required.
The following topics provide instructions on configuring OCVPN:
l Full mesh OCVPN on page 1313
l Hub-spoke OCVPN with ADVPN shortcut on page 1318
l Hub-spoke OCVPN with inter-overlay source NAT on page 1322
l OCVPN portal on page 1326
l SD-WAN integration with OCVPN on page 626
l Allow FortiClient to join OCVPN on page 1327
l Troubleshooting OCVPN on page 1331
Full mesh OCVPN
This example shows how to configure a full mesh Overlay Controller VPN (OCVPN), establishing full mesh IPsec tunnels
between all of the FortiGates.
License
l Free license: Three devices full mesh, 10 overlays, 16 subnets per overlay.
l Full License: Maximum of 16 devices, 10 overlays, 16 subnets per overlay.
Prerequisites
l All FortiGates must be running FortiOS 6.2.0 or later.
l All FortiGates must have Internet access.
l All FortiGates must be registered on FortiCare using the same FortiCare account.
Restrictions
l Non-root VDOMs do not support OCVPN.
l FortiOS 6.2.x is not compatible with FortiOS 6.0.x.
Terminology
Poll-interval How often FortiGate tries to fetch OCVPN-related data from OCVPN Cloud.
Role The device OCVPN role of spoke, primary-hub, or secondary-hub.
Overlay Defines network overlays and bind to subnets.
FortiOS 6.4.2 Administration Guide 1313
Fortinet Inc.
VPN
Subnet Internal network subnet (IPsec protected subnet). Traffic to or from this subnet enters the
IPsec tunnel encrypted by IPsec SA.
Sample topology
The following example shows three FortiGate units registered on FortiCare using the same FortiCare account. Each
FortiGate unit has one internal subnet, and no NAT exists between the units.
Sample configuration
The following overlays and subnets are used:
l Branch1:
l Overlay name: QA. Local subnets: 10.1.100.0/24
l Overlay name: PM. Local subnets: 10.2.100.0/24
l Branch2:
l Overlay name: QA. Local interfaces: lan1
l Overlay name: PM. Local interfaces: lan2
l Branch3:
l Overlay name: QA. Local subnets: 172.16.101.0/24
l Overlay name: PM. Local subnets: 172.16.102.0/24
The overlay names on each device must be the same for local and remote selector pairs to be
negotiated.
To register FortiGates on FortiCare:
1. Go to System > FortiGuard > License Information > FortiCare Support.
2. To register, click Register or Launch Portal.
3. Complete the options to register FortiGate on FortiCare.
FortiOS 6.4.2 Administration Guide 1314
Fortinet Inc.
VPN
To enable OCVPN in the GUI:
1. Go to VPN > Overlay Controller VPN.
2. Create the first overlay by setting the following options:
a. For Status, click Enabled.
b. For Role, click Spoke.
c. In the Overlays section, click Create New to create a network overlay.
3. Specify the Name, Local subnets, and/or Local interfaces.
The local subnet must be routable and interfaces must have IP addresses.
FortiOS 6.4.2 Administration Guide 1315
Fortinet Inc.
VPN
4. Click OK.
5. Click Apply to commit the configuration.
6. Repeat this procedure to create all the overlays.
To enable OCVPN in the CLI:
1. Configure Branch1:
config vpn ocvpn
set status enable
set multipath disable
config overlays
edit 1
set name "QA"
config subnets
edit 1
set subnet 10.1.100.0 255.255.255.0
next
end
next
edit 2
set name "PM"
config subnets
edit 1
set subnet 10.2.100.0 255.255.255.0
next
end
next
FortiOS 6.4.2 Administration Guide 1316
Fortinet Inc.
VPN
end
end
2. Configure Branch2:
config vpn ocvpn
set status enable
set multipath disable
config overlays
edit 1
set name "QA"
config subnets
edit 1
set type interface
set interface "lan1"
next
end
next
edit 2
set name "PM"
config subnets
edit 1
set type interface
set interface "lan2"
next
end
next
end
end
3. Configure Branch3:
config vpn ocvpn
set status enable
set multipath disable
config overlays
edit 1
set name "QA"
config subnets
edit 1
set subnet 172.16.101.0 255.255.255.0
next
end
next
edit 1
set name "PM"
config subnets
edit 1
set subnet 172.16.102.0 255.255.255.0
next
end
next
end
end
FortiOS 6.4.2 Administration Guide 1317
Fortinet Inc.
VPN
Hub-spoke OCVPN with ADVPN shortcut
This topic shows a sample configuration of a hub-spoke One-Click VPN (OCVPN) with an Auto Discovery VPN (ADVPN)
shortcut. OCVPN automatically detects the network topology based on members' information. To form a hub-spoke
OCVPN, at least one device must announce its role as the primary hub, another device can work as the secondary hub
(for redundancy), while others function as spokes.
License
l Free license: Hub-spoke network topology not supported.
l Full license: Maximum of 2 hubs, 10 overlays, 64 subnets per overlay; 1024 spokes, 10 overlays, 16 subnets per
overlay.
Prerequisites
l All FortiGates must be running FortiOS 6.2.0 or later.
l All FortiGates must have Internet access.
l All FortiGates must be registered on FortiCare using the same FortiCare account.
Restrictions
l Non-root VDOMs do not support OCVPN.
l FortiOS 6.2.x is not compatible with FortiOS 6.0.x.
OCVPN device roles
l Primary hub.
l Secondary hub.
l Spoke (OCVPN default role).
Sample topology
FortiOS 6.4.2 Administration Guide 1318
Fortinet Inc.
VPN
Sample configuration
The steps below use the following overlays and subnets for the sample configuration:
l Primary hub:
l Overlay name: QA. Local subnets: 172.16.101.0/24
l Overlay name: PM. Local subnets: 172.16.102.0/24
l Secondary hub:
l Overlays are synced from primary hub.
l Spoke1:
l Overlay name: QA. Local subnets: 10.1.100.0/24
l Overlay name: PM. Local subnets: 10.2.100.0/24
l Spoke2:
l Overlay name: QA. Local interfaces: lan1
l Overlay name: PM. Local interfaces: lan2
The overlay names on each device must be the same for local and remote selector pairs to be
negotiated.
To register FortiGates on FortiCare:
1. Go to System > FortiGuard > License Information > FortiCare Support.
2. To register, click Register or Launch Portal.
3. Complete the options to register FortiGate on FortiCare.
To enable hub-spoke OCVPN in the GUI:
1. Go to VPN > Overlay Controller VPN.
2. Configure the OCVPN primary hub by setting the following options:
a. For Status, click Enabled.
b. For Role, click Primary Hub.
c. In the Overlays section, click Create New to create a network overlay.
d. Specify the Name, Local subnets, and/or Local interfaces. Then click OK.
FortiOS 6.4.2 Administration Guide 1319
Fortinet Inc.
VPN
e. Click Apply to commit the configuration.
3. Configure the OCVPN secondary hub:
Overlays are synced from the primary hub and cannot be defined in the secondary hub.
a. In the Overlay Controller VPN pane, select Secondary Hub for the Role.
b. Select Apply to commit the configuration.
4. Configure the OCVPN spokes:
a. In the Overlay Controller VPN pane, select Spoke for the Role.
b. In the Overlays section, click Create New to create a network overlay.
c. Specify the Name, Local subnets, and/or Local interfaces.
The local subnet must be routable and interfaces must have IP addresses.
FortiOS 6.4.2 Administration Guide 1320
Fortinet Inc.
VPN
d. Click OK and then click Apply to commit the configuration.
To enable hub-spoke OCVPN in the CLI:
1. Configure the OCVPN primary hub:
config vpn ocvpn
set status enable
set role primary-hub
config overlays
edit 1
set name "QA"
config subnets
edit 1
set subnet 172.16.101.0 255.255.255.0
next
end
next
edit 2
set name "PM"
config subnets
edit 1
set subnet 172.16.102.0 255.255.255.0
next
end
next
end
end
2. Configure the OCVPN secondary hub:
config vpn ocvpn
set status enable
set role secondary-hub
end
3. Configure the OCVPN spoke1:
config vpn ocvpn
set status enable
FortiOS 6.4.2 Administration Guide 1321
Fortinet Inc.
VPN
config overlays
edit 1
set name "QA"
config subnets
edit 1
set subnet 10.1.100.0 255.255.255.0
next
end
next
edit 2
set name "PM"
config subnets
edit 1
set subnet 10.2.100.0 255.255.255.0
next
end
next
end
end
4. Configure the OCVPN spoke2:
config vpn ocvpn
set status enable
config overlays
edit 1
set name "QA"
config subnets
edit 1
set subnet 192.168.4.0 255.255.255.0
next
end
next
edit 2
set name "PM"
config subnets
edit 1
set subnet 192.168.5.0 255.255.255.0
next
end
next
end
end
Hub-spoke OCVPN with inter-overlay source NAT
This topic shows a sample configuration of hub-spoke OCVPN with inter-overlay source NAT. OCVPN isolates traffic
between overlays by default. With NAT enabled on spokes and assign-ip enabled on hub, you can have inter-overlay
communication.
Inter-overlay communication means devices from any source addresses and any source interfaces can communicate
with any devices in overlays' subnets when the overlay option assign-ip is enabled.
You must first disable auto-discovery before you can enable NAT.
FortiOS 6.4.2 Administration Guide 1322
Fortinet Inc.
VPN
License
l Free license: Hub-spoke network topology not supported.
l Full License: Maximum of 2 hubs, 10 overlays, 64 subnets per overlay; 1024 spokes, 10 overlays, 16 subnets per
overlay.
Prerequisites
l All FortiGates must be running FortiOS 6.2.0 or later.
l All FortiGates must have Internet access.
l All FortiGates must be registered on FortiCare using the same FortiCare account.
Restrictions
l Non-root VDOMs do not support OCVPN.
l FortiOS 6.2.x is not compatible with FortiOS 6.0.x.
OCVPN device roles
l Primary hub.
l Secondary hub.
l Spoke (OCVPN default role).
Sample topology
Sample configuration
You can only configure this feature using the CLI.
The overlay names on each device must be the same for local and remote selector pairs to be
negotiated.
FortiOS 6.4.2 Administration Guide 1323
Fortinet Inc.
VPN
To enable inter-overlay source NAT in the CLI:
1. Configure the primary hub, enable overlay QA, and configure assign-ip and IP range:
config vpn ocvpn
set status enable
set role primary-hub
config overlays
edit 1
set name "QA"
set assign-ip enable
set ipv4-start-ip 172.16.101.100
set ipv4-end-ip 172.16.101.200
config subnets
edit 1
set subnet 172.16.101.0 255.255.255.0
next
end
next
edit 2
set name "PM"
set assign-ip enable
config subnets
edit 1
set subnet 172.16.102.0 255.255.255.0
next
end
next
end
end
2. Configure the secondary hub:
config vpn ocvpn
set status enable
set role secondary-hub
end
3. Configure spoke1 and enable NAT on the spoke:
config vpn ocvpn
set status enable
set auto-discovery disable
set nat enable
config overlays
edit 1
set name "QA"
config subnets
edit 1
set subnet 10.1.100.0 255.255.255.0
next
end
next
edit 2
set name "PM"
config subnets
edit 1
set subnet 10.2.100.0 255.255.255.0
FortiOS 6.4.2 Administration Guide 1324
Fortinet Inc.
VPN
next
end
next
end
end
4. Configure spoke2 and enable NAT on the spoke:
config vpn ocvpn
set status enable
set auto-discovery disable
set nat enable
config overlays
edit 1
set name "QA"
config subnets
edit 1
set subnet 192.168.4.0 255.255.255.0
next
end
next
edit 2
set name "PM"
config subnets
edit 1
set subnet 192.168.5.0 255.255.255.0
next
end
next
end
end
A firewall policy with NAT is generated on the spoke:
edit 9
set name "_OCVPN2-1.1_nat"
set uuid 3f7a84b8-3d36-51e9-ee97-8f418c91e666
set srcintf "any"
set dstintf "_OCVPN2-1.1"
set srcaddr "all"
set dstaddr "_OCVPN2-1.1_remote_networks"
set action accept
set schedule "always"
set service "ALL"
set comments "Generated by OCVPN Cloud Service."
set nat enable
next
FortiOS 6.4.2 Administration Guide 1325
Fortinet Inc.
VPN
OCVPN portal
When you log into the OCVPN portal, the OCVPN license type and device information display. The device information
includes the device serial number, OCVPN role, hostname, public IP address, port number, and overlays.
You can unregister an OCVPN device from the OCVPN portal under Device on the right pane.
FortiOS 6.4.2 Administration Guide 1326
Fortinet Inc.
VPN
Use the OCVPN Diagram to show the OCVPN network topology.
Allow FortiClient to join OCVPN
Administrators can configure remote access for FortiClient within an OCVPN hub. This provides simple configurations to
allow a user group access to an overlay network.
FortiOS 6.4.2 Administration Guide 1327
Fortinet Inc.
VPN
To configure remote FortiClient access to an OCVPN hub in the GUI:
1. On the primary hub, configure the users and user groups required for the FortiClient dialup user authentication and
authorization. In this example, there are two user groups (dev_grp and qa_grp).
2. Go to VPN > Overlay Controller VPN and in the Overlays section, click Create New.
3. Enter a name and the local subnet (174.16.101.0/24 for dev and 22.202.2.0/24 for qa).
4. Enable FortiClient Access.
5. In the Access Rules section, click Create New.
6. Enter a name, and select the authentication groups and overlays.
The authentication groups will be used by the IPsec phase 1 interface for authentication, and by firewall policies for
authorization. The overlay allows access to the resource.
7. Click OK.
8. Create more rules if needed.
9. Click Apply.
To view the tunnel status and activity in the GUI:
1. Go to Dashboard > Network.
2. Click the IPsec widget to expand to full screen view.
To configure remote FortiClient access to an OCVPN hub in the CLI:
config vpn ocvpn
set status enable
set role primary-hub
set wan-interface "mgmt1"
set ip-allocation-block 10.254.0.0 255.255.0.0
config overlays
edit "dev"
FortiOS 6.4.2 Administration Guide 1328
Fortinet Inc.
VPN
config subnets
edit 1
set subnet 174.16.101.0 255.255.255.0
next
end
next
edit "qa"
config subnets
edit 1
set subnet 22.202.2.0 255.255.255.0
next
end
next
end
config forticlient-access
set status enable
set psksecret xxxxxxxxxxxx
config auth-groups
edit "dev"
set auth-group "dev_grp"
set overlays "dev"
next
edit "qa"
set auth-group "qa_grp"
set overlays "qa"
next
end
end
end
To view the tunnel status and activity in the CLI:
# diagnose vpn ike gateway list
vd: root/0
name: _OCVPN_FCT0_0
version: 1
interface: mgmt1 4
addr: 172.16.200.4:4500 -> 172.16.200.15:64916
created: 110s ago
xauth-user: usera
groups:
dev_grp 1
assigned IPv4 address: 10.254.128.1/255.255.255.255
nat: peer
IKE SA: created 1/1 established 1/1 time 20/20/20 ms
IPsec SA: created 1/1 established 1/1 time 0/0/0 ms
id/spi: 72 1ccd2abf2d981123/fd8da107f9e4d312
direction: responder
status: established 110-110s ago = 20ms
proposal: aes256-sha256
key: 105a0291b0c05219-3decdf78938a7bea-78943651e1720536-625114d66e46f668
lifetime/rekey: 86400/86019
DPD sent/recv: 00000000/00000af3
FortiOS 6.4.2 Administration Guide 1329
Fortinet Inc.
VPN
To view data on the PC running FortiClient:
C:\ route print
===========================================================================
IPv4 Route Table
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 10.1.100.5 10.1.100.13 281
10.1.100.0 255.255.255.0 10.254.128.2 10.254.128.1 1
10.1.100.13 255.255.255.255 On-link 10.1.100.13 281
10.1.101.0 255.255.255.0 10.254.128.2 10.254.128.1 1
10.6.30.0 255.255.255.0 On-link 10.6.30.13 281
10.6.30.13 255.255.255.255 On-link 10.6.30.13 281
10.6.30.255 255.255.255.255 On-link 10.6.30.13 281
10.254.0.0 255.255.0.0 10.254.128.2 10.254.128.1 1
10.254.128.1 255.255.255.255 On-link 10.254.128.1 257
22.202.2.0 255.255.255.0 10.254.128.2 10.254.128.1 1
127.0.0.0 255.0.0.0 On-link 127.0.0.1 331
127.0.0.1 255.255.255.255 On-link 127.0.0.1 331
127.255.255.255 255.255.255.255 On-link 127.0.0.1 331
172.16.200.4 255.255.255.255 10.1.100.5 10.1.100.13 25
174.16.101.0 255.255.255.0 10.254.128.2 10.254.128.1 1
224.0.0.0 240.0.0.0 On-link 127.0.0.1 331
224.0.0.0 240.0.0.0 On-link 10.254.128.1 257
224.0.0.0 240.0.0.0 On-link 10.6.30.13 281
224.0.0.0 240.0.0.0 On-link 10.1.100.13 281
255.255.255.255 255.255.255.255 On-link 127.0.0.1 331
255.255.255.255 255.255.255.255 On-link 10.254.128.1 257
255.255.255.255 255.255.255.255 On-link 10.6.30.13 281
255.255.255.255 255.255.255.255 On-link 10.1.100.13 281
===========================================================================
Persistent Routes:
Network Address Netmask Gateway Address Metric
0.0.0.0 0.0.0.0 10.1.100.5 Default
The PC can access the dev resource overlay, but not qa:
C:\Users\tester>ping 174.16.101.44
Pinging 174.16.101.44 with 32 bytes of data:
Reply from 174.16.101.44: bytes=32 time=1ms TTL=63
Reply from 174.16.101.44: bytes=32 time=1ms TTL=63
Reply from 174.16.101.44: bytes=32 time=1ms TTL=63
Reply from 174.16.101.44: bytes=32 time=1ms TTL=63
Ping statistics for 174.16.101.44:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 1ms, Maximum = 1ms, Average = 1ms
C:\Users\tester>ping 22.202.2.2
Pinging 22.202.2.2 with 32 bytes of data:
Request timed out.
Request timed out.
FortiOS 6.4.2 Administration Guide 1330
Fortinet Inc.
VPN
Request timed out.
Request timed out.
Ping statistics for 22.202.2.2:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
Troubleshooting OCVPN
This document includes troubleshooting steps for the following OCVPN network topologies:
l Full mesh OCVPN.
l Hub-spoke OCVPN with ADVPN shortcut.
l Hub-spoke OCVPN with inter-overlay source NAT.
For OCVPN configurations in other network topologies, see the other OCVPN topics.
Troubleshooting full mesh network topology
l Branch_1 # diagnose vpn ocvpn status
Current State : Registered
Topology : Full-Mesh
Role : Spoke
Server Status : Up
Registration time : Thu Feb 28 18:42:25 2019
Update time : Thu Feb 28 15:57:18 2019
Poll time : Fri Mar 1 15:02:28 2019
l Branch_1 # diagnose vpn ocvpn show-meta
Topology :: auto
License :: full
Members :: 3
Max-free :: 3
l Branch_1 # diagnose vpn ocvpn show-overlays
QA
PM
l Branch_1 # diagnose vpn ocvpn show-members
Member: { "SN": "FG100D3G15801621", "IPv4": "172.16.200.1", "port": "500", "slot": 1000,
"overlay": [ { "id": 0, "name": "QA", "subnets": [ "10.1.100.0\/255.255.255.0" ], "ip_
range": "0.0.0.0-0.0.0.0" }, { "id": 1, "name": "PM", "subnets": [
"10.2.100.0\/255.255.255.0" ], "ip_range": "0.0.0.0-0.0.0.0" } ], "Name": "FortiGate-
100D", "topology_role": "spoke" }
Member: { "SN": "FG900D3915800083", "IPv4": "172.16.200.4", "port": "500", "slot": 1001,
"overlay": [ { "id": 0, "name": "QA", "subnets": [ "172.16.101.0\/255.255.255.0" ], "ip_
range": "0.0.0.0-0.0.0.0" }, { "id": 1, "name": "PM", "subnets": [
"172.16.102.0\/255.255.255.0" ], "ip_range": "0.0.0.0-0.0.0.0" } ], "Name": "Branch3",
"topology_role": "spoke" }
Member: { "SN": "FGT51E3U16001314", "IPv4": "172.16.200.199", "port": "500", "slot":
1002, "overlay": [ { "id": 0, "name": "QA", "subnets": [ "192.168.4.0\/255.255.255.0" ],
"ip_range": "0.0.0.0-0.0.0.0" }, { "id": 1, "name": "PM", "subnets": [
"192.168.5.0\/255.255.255.0" ], "ip_range": "0.0.0.0-0.0.0.0" } ], "Name": "Branch2",
"topology_role": "spoke" }
FortiOS 6.4.2 Administration Guide 1331
Fortinet Inc.
VPN
l Branch_1 # diagnose vpn tunnel list
list all ipsec tunnel in vd 0
------------------------------------------------------
name=_OCVPN2-3.1 ver=2 serial=4 172.16.200.1:0->172.16.200.199:0 dst_mtu=1500
bound_if=11 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/528 options[0210]=create_dev
frag-rfc accept_traffic=1
proxyid_num=2 child_num=0 refcnt=13 ilast=7 olast=0 ad=/0
stat: rxp=0 txp=7 rxb=0 txb=588
dpd: mode=on-demand on=1 idle=20000ms retry=3 count=0 seqno=6
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=_OCVPN2-3.1 proto=0 sa=1 ref=2 serial=8 auto-negotiate
src: 0:10.1.100.0-10.1.100.255:0
dst: 0:192.168.4.0-192.168.4.255:0
SA: ref=3 options=18627 type=00 soft=0 mtu=1438 expire=42923/0B replaywin=2048
seqno=8 esn=0 replaywin_lastseq=00000000 itn=0 qat=0
life: type=01 bytes=0/0 timeout=42931/43200
dec: spi=c34bb752 esp=aes key=16 3c5ceeff3cac1eaa2702b5ccb713ab9b
ah=sha1 key=20 5903e358b3d8938ee64f0412887a0fe741ccb105
enc: spi=b5bd4fe1 esp=aes key=16 8ae97a8abe24dae725d614d2a6efdcb0
ah=sha1 key=20 9ec200d9c0cef9e1b7cf76e05dbf344c70f53214
dec:pkts/bytes=0/0, enc:pkts/bytes=7/1064
proxyid=_OCVPN2-3.1 proto=0 sa=0 ref=2 serial=1 auto-negotiate
src: 0:10.1.100.0/255.255.255.0:0
dst: 0:0.0.0.0/0.0.0.0:0
------------------------------------------------------
name=_OCVPN2-4.1 ver=2 serial=6 172.16.200.1:0->172.16.200.4:0 dst_mtu=1500
bound_if=11 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/528 options[0210]=create_dev
frag-rfc accept_traffic=1
proxyid_num=2 child_num=0 refcnt=11 ilast=19 olast=19 ad=/0
stat: rxp=0 txp=0 rxb=0 txb=0
dpd: mode=on-demand on=1 idle=20000ms retry=3 count=0 seqno=0
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=_OCVPN2-4.1 proto=0 sa=1 ref=2 serial=7 auto-negotiate
src: 0:10.1.100.0-10.1.100.255:0
dst: 0:172.16.101.0-172.16.101.255:0
SA: ref=3 options=18627 type=00 soft=0 mtu=1438 expire=42911/0B replaywin=2048
seqno=1 esn=0 replaywin_lastseq=00000000 itn=0 qat=0
life: type=01 bytes=0/0 timeout=42931/43200
dec: spi=c34bb750 esp=aes key=16 8c9844a8bcd3fda6c7bd8a4f2ec81ef1
ah=sha1 key=20 680c7144346f5b52126cbad9f325821b048c7192
enc: spi=f2d1f2d4 esp=aes key=16 f9625fc8590152829eb39eecab3a3999
ah=sha1 key=20 5df8447416da541fa54dde9fa3e5c35fbfc4723f
dec:pkts/bytes=0/0, enc:pkts/bytes=0/0
proxyid=_OCVPN2-4.1 proto=0 sa=0 ref=2 serial=1 auto-negotiate
src: 0:10.1.100.0/255.255.255.0:0
dst: 0:0.0.0.0/0.0.0.0:0
------------------------------------------------------
name=_OCVPN2-3.2 ver=2 serial=3 172.16.200.1:0->172.16.200.199:0 dst_mtu=1500
bound_if=11 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/528 options[0210]=create_dev
frag-rfc accept_traffic=1
proxyid_num=2 child_num=0 refcnt=11 ilast=6 olast=6 ad=/0
stat: rxp=0 txp=0 rxb=0 txb=0
dpd: mode=on-demand on=1 idle=20000ms retry=3 count=0 seqno=0
FortiOS 6.4.2 Administration Guide 1332
Fortinet Inc.
VPN
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=_OCVPN2-3.2 proto=0 sa=1 ref=2 serial=8 auto-negotiate
src: 0:10.2.100.0-10.2.100.255:0
dst: 0:192.168.5.0-192.168.5.255:0
SA: ref=3 options=18627 type=00 soft=0 mtu=1438 expire=42923/0B replaywin=2048
seqno=1 esn=0 replaywin_lastseq=00000000 itn=0 qat=0
life: type=01 bytes=0/0 timeout=42930/43200
dec: spi=c34bb753 esp=aes key=16 58ddfad9a3699f1c49f3a9f369145c28
ah=sha1 key=20 e749c7e6a7aaff119707c792eb73cd975127873b
enc: spi=b5bd4fe2 esp=aes key=16 8f2366e653f5f9ad6587be1ce1905764
ah=sha1 key=20 5347bf24e51219d483c0f7b058eceab202026204
dec:pkts/bytes=0/0, enc:pkts/bytes=0/0
proxyid=_OCVPN2-3.2 proto=0 sa=0 ref=2 serial=1 auto-negotiate
src: 0:10.2.100.0/255.255.255.0:0
dst: 0:0.0.0.0/0.0.0.0:0
------------------------------------------------------
name=_OCVPN2-4.2 ver=2 serial=5 172.16.200.1:0->172.16.200.4:0 dst_mtu=1500
bound_if=11 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/528 options[0210]=create_dev
frag-rfc accept_traffic=1
proxyid_num=2 child_num=0 refcnt=11 ilast=17 olast=17 ad=/0
stat: rxp=0 txp=0 rxb=0 txb=0
dpd: mode=on-demand on=1 idle=20000ms retry=3 count=0 seqno=0
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=_OCVPN2-4.2 proto=0 sa=1 ref=2 serial=7 auto-negotiate
src: 0:10.2.100.0-10.2.100.255:0
dst: 0:172.16.102.0-172.16.102.255:0
SA: ref=3 options=18627 type=00 soft=0 mtu=1438 expire=42905/0B replaywin=2048
seqno=1 esn=0 replaywin_lastseq=00000000 itn=0 qat=0
life: type=01 bytes=0/0 timeout=42927/43200
dec: spi=c34bb751 esp=aes key=16 41449ee5ea43d3e1f80df05fc632cd44
ah=sha1 key=20 3ca2aea1c8764f35ccf987cdeca7cf6eb54331fb
enc: spi=f2d1f2d5 esp=aes key=16 9010dd57e502c6296b27a4649a45a6ba
ah=sha1 key=20 caf86a176ce04464221543f15fc3c63fc573b8ee
dec:pkts/bytes=0/0, enc:pkts/bytes=0/0
proxyid=_OCVPN2-4.2 proto=0 sa=0 ref=2 serial=1 auto-negotiate
src: 0:10.2.100.0/255.255.255.0:0
dst: 0:0.0.0.0/0.0.0.0:0
l Branch_1 # get router info routing-table all
Routing table for VRF=0
Codes: K - kernel, C - connected, S - static, R - RIP, B - BGP
O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default
S* 0.0.0.0/0 [10/0] via 172.16.200.254, port1
C 10.1.100.0/24 is directly connected, dmz
C 10.2.100.0/24 is directly connected, loop
C 11.101.1.0/24 is directly connected, wan1
C 11.102.1.0/24 is directly connected, wan2
S 192.168.5.0/24 [20/0] is directly connected, _OCVPN2-3.2
C 172.16.200.0/24 is directly connected, port1
S 172.16.101.0/24 [20/0] is directly connected, _OCVPN2-4.1
FortiOS 6.4.2 Administration Guide 1333
Fortinet Inc.
VPN
S 172.16.102.0/24 [20/0] is directly connected, _OCVPN2-4.2
S 192.168.4.0/24 [20/0] is directly connected, _OCVPN2-3.1
Troubleshooting hub-spoke with ADVPN shortcut
l Primary-Hub # diagnose vpn ocvpn status
Current State : Registered
Topology : Dual-Hub-Spoke
Role : Primary-Hub
Server Status : Up
Registration time : Sat Mar 2 11:31:54 2019
Poll time : Sat Mar 2 11:46:02 2019
l Spoke1 # diagnose vpn ocvpn status
Current State : Registered
Topology : Dual-Hub-Spoke
Role : Spoke
Server Status : Up
Registration time : Sat Mar 2 11:41:22 2019
Poll time : Sat Mar 2 11:46:44 2019
l Primary-Hub # diagnose vpn ocvpn show-members
Member: { "sn": "FG900D3915800083", "ip_v4": "172.16.200.4", "port": 500, "slot": 0,
"overlay": [ { "id": 0, "name": "QA", "subnets": [ "172.16.101.0\/255.255.255.0" ], "ip_
range": "0.0.0.0-0.0.0.0" }, { "id": 1, "name": "PM", "subnets": [
"172.16.102.0\/255.255.255.0" ], "ip_range": "0.0.0.0-0.0.0.0" } ], "name": "Primary-
Hub", "topology_role": "primary_hub", "eap": "disable", "auto_discovery": "enable" }
Member: { "sn": "FG100D3G15828488", "ip_v4": "172.16.200.2", "port": 500, "slot": 1,
"overlay": [ { "id": 0, "name": "QA", "subnets": [ "172.16.101.0\/255.255.255.0" ], "ip_
range": "0.0.0.0-0.0.0.0" }, { "id": 1, "name": "PM", "subnets": [
"172.16.102.0\/255.255.255.0" ], "ip_range": "0.0.0.0-0.0.0.0" } ], "name": "Secondary-
Hub", "topology_role": "secondary_hub", "eap": "disable", "auto_discovery": "enable" }
Member: { "sn": "FG100D3G15801621", "ip_v4": "172.16.200.1", "port": 500, "slot": 1000,
"overlay": [ { "id": 0, "name": "QA", "subnets": [ "10.1.100.0\/255.255.255.0" ], "ip_
range": "0.0.0.0-0.0.0.0" }, { "id": 1, "name": "PM", "subnets": [
"10.2.100.0\/255.255.255.0" ], "ip_range": "0.0.0.0-0.0.0.0" } ], "name": "Spoke1",
"topology_role": "spoke" }
Member: { "sn": "FGT51E3U16001314", "ip_v4": "172.16.200.3", "port": 500, "slot": 1001,
"overlay": [ { "id": 0, "name": "QA", "subnets": [ "192.168.4.0\/255.255.255.0" ], "ip_
range": "0.0.0.0-0.0.0.0" }, { "id": 1, "name": "PM", "subnets": [
"192.168.5.0\/255.255.255.0" ], "ip_range": "0.0.0.0-0.0.0.0" } ], "name": "Spoke2",
"topology_role": "spoke" }
l Primary-Hub # diagnose vpn ocvpn show-meta
Topology :: auto
License :: full
Members :: 4
Max-free :: 3
l Primary-Hub # diagnose vpn ocvpn show-overlays
QA
PM
FortiOS 6.4.2 Administration Guide 1334
Fortinet Inc.
VPN
l Spoke1 # diagnose vpn tunnel list
list all ipsec tunnel in vd 0
------------------------------------------------------
name=_OCVPN2-0.0 ver=2 serial=6 172.16.200.1:0->172.16.200.4:0 dst_mtu=1500
bound_if=11 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/528 options[0210]=create_dev
frag-rfc accept_traffic=1
proxyid_num=1 child_num=0 refcnt=11 ilast=0 olast=0 ad=r/2
stat: rxp=1 txp=34 rxb=152 txb=2856
dpd: mode=on-idle on=1 idle=20000ms retry=3 count=0 seqno=46
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=_OCVPN2-0.0 proto=0 sa=1 ref=2 serial=1 auto-negotiate adr
src: 0:10.1.100.0/255.255.255.0:0
dst: 0:0.0.0.0/0.0.0.0:0
SA: ref=3 options=1a227 type=00 soft=0 mtu=1438 expire=42895/0B replaywin=2048
seqno=1 esn=0 replaywin_lastseq=00000000 itn=0 qat=0
life: type=01 bytes=0/0 timeout=42901/43200
dec: spi=048477c7 esp=aes key=16 240e064c0f1c980ca31980b9e7605c9d
ah=sha1 key=20 6ff022cbebcaff4c5de62eefb2e6180c40a3adb2
enc: spi=dfcffa86 esp=aes key=16 862208de164a02af377756c2bcabd588
ah=sha1 key=20 af6e54781fd42d7a2ba2119ec95d0f95629c8448
dec:pkts/bytes=0/0, enc:pkts/bytes=0/0
------------------------------------------------------
name=_OCVPN2-1.0 ver=2 serial=8 172.16.200.1:0->172.16.200.2:0 dst_mtu=1500
bound_if=11 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/528 options[0210]=create_dev
frag-rfc accept_traffic=0
proxyid_num=1 child_num=0 refcnt=10 ilast=934 olast=934 ad=/0
stat: rxp=0 txp=0 rxb=0 txb=0
dpd: mode=on-idle on=0 idle=20000ms retry=3 count=0 seqno=1
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=_OCVPN2-1.0 proto=0 sa=0 ref=2 serial=1 auto-negotiate adr
src: 0:10.1.100.0/255.255.255.0:0
dst: 0:0.0.0.0/0.0.0.0:0
------------------------------------------------------
name=_OCVPN2-0.1 ver=2 serial=5 172.16.200.1:0->172.16.200.4:0 dst_mtu=1500
bound_if=11 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/528 options[0210]=create_dev
frag-rfc accept_traffic=1
proxyid_num=1 child_num=0 refcnt=11 ilast=12 olast=12 ad=r/2
stat: rxp=0 txp=0 rxb=0 txb=0
dpd: mode=on-idle on=1 idle=20000ms retry=3 count=0 seqno=46
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=_OCVPN2-0.1 proto=0 sa=1 ref=2 serial=1 auto-negotiate adr
src: 0:10.2.100.0/255.255.255.0:0
dst: 0:0.0.0.0/0.0.0.0:0
SA: ref=3 options=1a227 type=00 soft=0 mtu=1438 expire=42895/0B replaywin=2048
seqno=1 esn=0 replaywin_lastseq=00000000 itn=0 qat=0
life: type=01 bytes=0/0 timeout=42901/43200
dec: spi=048477c8 esp=aes key=16 701ec608767f4988b76c2f662464e654
ah=sha1 key=20 93c65d106dc610d7ee3f04487f08601a9e00ffdd
enc: spi=dfcffa87 esp=aes key=16 02b2d04dce3d81ebab69e128d45cb7ca
ah=sha1 key=20 4a9283847f852c83a75691fad44d07d8409a2267
dec:pkts/bytes=0/0, enc:pkts/bytes=0/0
------------------------------------------------------
name=_OCVPN2-1.1 ver=2 serial=7 172.16.200.1:0->172.16.200.2:0 dst_mtu=1500
FortiOS 6.4.2 Administration Guide 1335
Fortinet Inc.
VPN
bound_if=11 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/528 options[0210]=create_dev
frag-rfc accept_traffic=0
proxyid_num=1 child_num=0 refcnt=10 ilast=934 olast=934 ad=/0
stat: rxp=0 txp=0 rxb=0 txb=0
dpd: mode=on-idle on=0 idle=20000ms retry=3 count=0 seqno=1
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=_OCVPN2-1.1 proto=0 sa=0 ref=2 serial=1 auto-negotiate adr
src: 0:10.2.100.0/255.255.255.0:0
dst: 0:0.0.0.0/0.0.0.0:0
l Spoke1 # get router info routing-table all
Routing table for VRF=0
Codes: K - kernel, C - connected, S - static, R - RIP, B - BGP
O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default
S* 0.0.0.0/0 [10/0] via 172.16.200.254, port1
C 10.1.100.0/24 is directly connected, dmz
C 10.2.100.0/24 is directly connected, loop
C 11.101.1.0/24 is directly connected, wan1
C 11.102.1.0/24 is directly connected, wan2
S 172.16.102.0/24 [20/0] is directly connected, _OCVPN2-0.1
C 172.16.200.0/24 is directly connected, port1
S 172.16.101.0/24 [20/0] is directly connected, _OCVPN2-0.0
S 192.168.4.0/24 [20/0] is directly connected, _OCVPN2-0.0
S 192.168.5.0/24 [20/0] is directly connected, _OCVPN2-0.1
l Generate traffic from spoke1 to spoke2 to trigger the ADVPN shortcut and check the VPN tunnel and routing-table
again on spoke1.
branch1 # diagnose vpn tunnel list
list all ipsec tunnel in vd 0
------------------------------------------------------
name=_OCVPN2-0.0_0 ver=2 serial=a 172.16.200.1:0->172.16.200.3:0 dst_mtu=1500
bound_if=11 lgwy=static/1 tun=intf/0 mode=dial_inst/3 encap=none/720 options
[02d0]=create_dev no-sysctl rgwy-chg frag-rfc accept_traffic=1
parent=_OCVPN2-0.0 index=0
proxyid_num=1 child_num=0 refcnt=14 ilast=0 olast=0 ad=r/2
stat: rxp=7 txp=7 rxb=1064 txb=588
dpd: mode=on-idle on=1 idle=20000ms retry=3 count=0 seqno=0
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=_OCVPN2-0.0 proto=0 sa=1 ref=2 serial=1 auto-negotiate add-route adr
src: 0:10.1.100.0-10.1.100.255:0
dst: 0:192.168.4.0-192.168.4.255:0
SA: ref=3 options=1a227 type=00 soft=0 mtu=1438 expire=43180/0B replaywin=2048
seqno=8 esn=0 replaywin_lastseq=00000008 itn=0 qat=0
life: type=01 bytes=0/0 timeout=43187/43200
dec: spi=048477c9 esp=aes key=16 27c35d53793013ef24cf887561e9f313
ah=sha1 key=20 2c8cfd328c3b29104db0ca74a00c6063f46cafe4
enc: spi=fb9e13fd esp=aes key=16 9d0d3bf6c84b7ddaf9d9196fe74002ed
ah=sha1 key=20 d1f541db787dea384c6a4df16fc228abeb7ae334
FortiOS 6.4.2 Administration Guide 1336
Fortinet Inc.
VPN
dec:pkts/bytes=7/588, enc:pkts/bytes=7/1064
------------------------------------------------------
name=_OCVPN2-0.0 ver=2 serial=6 172.16.200.1:0->172.16.200.4:0 dst_mtu=1500
bound_if=11 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/528 options[0210]=create_dev
frag-rfc accept_traffic=1
proxyid_num=1 child_num=1 refcnt=12 ilast=7 olast=7 ad=r/2
stat: rxp=2 txp=35 rxb=304 txb=2940
dpd: mode=on-idle on=1 idle=20000ms retry=3 count=0 seqno=65
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=_OCVPN2-0.0 proto=0 sa=1 ref=2 serial=1 auto-negotiate adr
src: 0:10.1.100.0/255.255.255.0:0
dst: 0:0.0.0.0/0.0.0.0:0
SA: ref=3 options=1a227 type=00 soft=0 mtu=1438 expire=42500/0B replaywin=2048
seqno=2 esn=0 replaywin_lastseq=00000002 itn=0 qat=0
life: type=01 bytes=0/0 timeout=42901/43200
dec: spi=048477c7 esp=aes key=16 240e064c0f1c980ca31980b9e7605c9d
ah=sha1 key=20 6ff022cbebcaff4c5de62eefb2e6180c40a3adb2
enc: spi=dfcffa86 esp=aes key=16 862208de164a02af377756c2bcabd588
ah=sha1 key=20 af6e54781fd42d7a2ba2119ec95d0f95629c8448
dec:pkts/bytes=1/84, enc:pkts/bytes=1/152
------------------------------------------------------
name=_OCVPN2-1.0 ver=2 serial=8 172.16.200.1:0->172.16.200.2:0 dst_mtu=1500
bound_if=11 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/528 options[0210]=create_dev
frag-rfc accept_traffic=0
proxyid_num=1 child_num=0 refcnt=10 ilast=1328 olast=1328 ad=/0
stat: rxp=0 txp=0 rxb=0 txb=0
dpd: mode=on-idle on=0 idle=20000ms retry=3 count=0 seqno=1
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=_OCVPN2-1.0 proto=0 sa=0 ref=2 serial=1 auto-negotiate adr
src: 0:10.1.100.0/255.255.255.0:0
dst: 0:0.0.0.0/0.0.0.0:0
------------------------------------------------------
name=_OCVPN2-0.1 ver=2 serial=5 172.16.200.1:0->172.16.200.4:0 dst_mtu=1500
bound_if=11 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/528 options[0210]=create_dev
frag-rfc accept_traffic=1
proxyid_num=1 child_num=0 refcnt=11 ilast=5 olast=5 ad=r/2
stat: rxp=0 txp=0 rxb=0 txb=0
dpd: mode=on-idle on=1 idle=20000ms retry=3 count=0 seqno=66
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=_OCVPN2-0.1 proto=0 sa=1 ref=2 serial=1 auto-negotiate adr
src: 0:10.2.100.0/255.255.255.0:0
dst: 0:0.0.0.0/0.0.0.0:0
SA: ref=3 options=1a227 type=00 soft=0 mtu=1438 expire=42500/0B replaywin=2048
seqno=1 esn=0 replaywin_lastseq=00000000 itn=0 qat=0
life: type=01 bytes=0/0 timeout=42901/43200
dec: spi=048477c8 esp=aes key=16 701ec608767f4988b76c2f662464e654
ah=sha1 key=20 93c65d106dc610d7ee3f04487f08601a9e00ffdd
enc: spi=dfcffa87 esp=aes key=16 02b2d04dce3d81ebab69e128d45cb7ca
ah=sha1 key=20 4a9283847f852c83a75691fad44d07d8409a2267
dec:pkts/bytes=0/0, enc:pkts/bytes=0/0
------------------------------------------------------
name=_OCVPN2-1.1 ver=2 serial=7 172.16.200.1:0->172.16.200.2:0 dst_mtu=1500
bound_if=11 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/528 options[0210]=create_dev
FortiOS 6.4.2 Administration Guide 1337
Fortinet Inc.
VPN
frag-rfc accept_traffic=0
proxyid_num=1 child_num=0 refcnt=10 ilast=1328 olast=1328 ad=/0
stat: rxp=0 txp=0 rxb=0 txb=0
dpd: mode=on-idle on=0 idle=20000ms retry=3 count=0 seqno=1
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=_OCVPN2-1.1 proto=0 sa=0 ref=2 serial=1 auto-negotiate adr
src: 0:10.2.100.0/255.255.255.0:0
dst: 0:0.0.0.0/0.0.0.0:0
Routing table for VRF=0
Codes: K - kernel, C - connected, S - static, R - RIP, B - BGP
O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default
S* 0.0.0.0/0 [10/0] via 172.16.200.254, port1
C 10.1.100.0/24 is directly connected, dmz
C 10.2.100.0/24 is directly connected, loop
C 11.101.1.0/24 is directly connected, wan1
C 11.102.1.0/24 is directly connected, wan2
S 172.16.102.0/24 [20/0] is directly connected, _OCVPN2-0.1
C 172.16.200.0/24 is directly connected, port1
S 172.16.101.0/24 [20/0] is directly connected, _OCVPN2-0.0
S 192.168.4.0/24 [15/0] via 172.16.200.3, _OCVPN2-0.0_0
S 192.168.5.0/24 [20/0] is directly connected, _OCVPN2-0.1
l Simulate the primary hub being unavailable where all spokes' dialup VPN tunnels will switch to the secondary hub,
to check VPN tunnel status and routing-table.
list all ipsec tunnel in vd 0
------------------------------------------------------
name=_OCVPN2-0.0 ver=2 serial=6 172.16.200.1:0->172.16.200.4:0 dst_mtu=1500
bound_if=11 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/528 options[0210]=create_dev
frag-rfc accept_traffic=0
proxyid_num=1 child_num=0 refcnt=10 ilast=25 olast=25 ad=/0
stat: rxp=0 txp=0 rxb=0 txb=0
dpd: mode=on-idle on=0 idle=20000ms retry=3 count=0 seqno=82
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=_OCVPN2-0.0 proto=0 sa=0 ref=2 serial=1 auto-negotiate adr
src: 0:10.1.100.0/255.255.255.0:0
dst: 0:0.0.0.0/0.0.0.0:0
------------------------------------------------------
name=_OCVPN2-1.0 ver=2 serial=8 172.16.200.1:0->172.16.200.2:0 dst_mtu=1500
bound_if=11 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/528 options[0210]=create_dev
frag-rfc accept_traffic=1
proxyid_num=1 child_num=0 refcnt=11 ilast=14 olast=14 ad=r/2
stat: rxp=0 txp=0 rxb=0 txb=0
dpd: mode=on-idle on=1 idle=20000ms retry=3 count=0 seqno=9
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=_OCVPN2-1.0 proto=0 sa=1 ref=2 serial=1 auto-negotiate adr
src: 0:10.1.100.0/255.255.255.0:0
FortiOS 6.4.2 Administration Guide 1338
Fortinet Inc.
VPN
dst: 0:0.0.0.0/0.0.0.0:0
SA: ref=3 options=1a227 type=00 soft=0 mtu=1438 expire=42723/0B replaywin=2048
seqno=1 esn=0 replaywin_lastseq=00000000 itn=0 qat=0
life: type=01 bytes=0/0 timeout=42898/43200
dec: spi=048477cd esp=aes key=16 9bb363a32378b5897cd42890c92df811
ah=sha1 key=20 2ed40583b9544e37867349b4adc7c013024d7e17
enc: spi=f345fb42 esp=aes key=16 3ea31dff3310b245700a131db4565851
ah=sha1 key=20 522862dfb232514b845e436133b148da0e67b7c4
dec:pkts/bytes=0/0, enc:pkts/bytes=0/0
------------------------------------------------------
name=_OCVPN2-0.1 ver=2 serial=5 172.16.200.1:0->172.16.200.4:0 dst_mtu=1500
bound_if=11 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/528 options[0210]=create_dev
frag-rfc accept_traffic=0
proxyid_num=1 child_num=0 refcnt=10 ilast=19 olast=19 ad=/0
stat: rxp=0 txp=0 rxb=0 txb=0
dpd: mode=on-idle on=0 idle=20000ms retry=3 count=0 seqno=83
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=_OCVPN2-0.1 proto=0 sa=0 ref=2 serial=1 auto-negotiate adr
src: 0:10.2.100.0/255.255.255.0:0
dst: 0:0.0.0.0/0.0.0.0:0
------------------------------------------------------
name=_OCVPN2-1.1 ver=2 serial=7 172.16.200.1:0->172.16.200.2:0 dst_mtu=1500
bound_if=11 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/528 options[0210]=create_dev
frag-rfc accept_traffic=1
proxyid_num=1 child_num=0 refcnt=11 ilast=12 olast=12 ad=r/2
stat: rxp=0 txp=0 rxb=0 txb=0
dpd: mode=on-idle on=1 idle=20000ms retry=3 count=0 seqno=9
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=_OCVPN2-1.1 proto=0 sa=1 ref=2 serial=1 auto-negotiate adr
src: 0:10.2.100.0/255.255.255.0:0
dst: 0:0.0.0.0/0.0.0.0:0
SA: ref=3 options=1a227 type=00 soft=0 mtu=1438 expire=42728/0B replaywin=2048
seqno=1 esn=0 replaywin_lastseq=00000000 itn=0 qat=0
life: type=01 bytes=0/0 timeout=42902/43200
dec: spi=048477cf esp=aes key=16 b6f0ca7564abcd8559b5b0ebb3fd04c1
ah=sha1 key=20 4130d040554b39daca72adac7583b9cc83cce3c8
enc: spi=f345fb43 esp=aes key=16 727582f20fcedff884ba693ed2164bcd
ah=sha1 key=20 b0a625803fde701ed9d28d256079e908954b7fc8
dec:pkts/bytes=0/0, enc:pkts/bytes=0/0
Routing table for VRF=0
Codes: K - kernel, C - connected, S - static, R - RIP, B - BGP
O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default
S* 0.0.0.0/0 [10/0] via 172.16.200.254, port1
C 10.1.100.0/24 is directly connected, dmz
C 10.2.100.0/24 is directly connected, loop
C 11.101.1.0/24 is directly connected, wan1
C 11.102.1.0/24 is directly connected, wan2
FortiOS 6.4.2 Administration Guide 1339
Fortinet Inc.
VPN
S 172.16.102.0/24 [21/0] is directly connected, _OCVPN2-1.1
C 172.16.200.0/24 is directly connected, port1
S 172.16.101.0/24 [21/0] is directly connected, _OCVPN2-1.0
S 192.168.4.0/24 [21/0] is directly connected, _OCVPN2-1.0
S 192.168.5.0/24 [21/0] is directly connected, _OCVPN2-1.1
Troubleshooting hub-spoke with inter-overlay source NAT
l Primary-Hub # diagnose vpn ocvpn status
Current State : Registered
Topology : Dual-Hub-Spoke
Role : Primary-Hub
Server Status : Up
Registration time : Sat Mar 2 11:31:54 2019
Update time : Sat Mar 2 13:57:05 2019
Poll time : Sat Mar 2 14:03:31 2019
l Spoke1 # diagnose vpn ocvpn status
Current State : Registered
Topology : Dual-Hub-Spoke
Role : Spoke
Server Status : Up
Registration time : Sat Mar 2 13:58:01 2019
Poll time : Sat Mar 2 14:04:22 2019
l Primary-Hub # diagnose vpn ocvpn show-members
Member: { "sn": "FG900D3915800083", "ip_v4": "172.16.200.4", "port": 500, "slot": 0,
"overlay": [ { "id": 0, "name": "QA", "subnets": [ "172.16.101.0\/255.255.255.0" ], "ip_
range": "172.16.101.100-172.16.101.200" }, { "id": 1, "name": "PM", "subnets": [
"172.16.102.0\/255.255.255.0" ], "ip_range": "172.16.102.100-172.16.102.200" } ],
"name": "Primary-Hub", "topology_role": "primary_hub", "eap": "disable", "auto_
discovery": "enable" }
Member: { "sn": "FG100D3G15828488", "ip_v4": "172.16.200.2", "port": 500, "slot": 1,
"overlay": [ { "id": 0, "name": "QA", "subnets": [ "172.16.101.0\/255.255.255.0" ], "ip_
range": "0.0.0.0-0.0.0.0" }, { "id": 1, "name": "PM", "subnets": [
"172.16.102.0\/255.255.255.0" ], "ip_range": "0.0.0.0-0.0.0.0" } ], "name": "Secondary-
Hub", "topology_role": "secondary_hub", "eap": "disable", "auto_discovery": "enable" }
Member: { "sn": "FGT51E3U16001314", "ip_v4": "172.16.200.3", "port": 500, "slot": 1001,
"overlay": [ { "id": 0, "name": "QA", "subnets": [ "192.168.4.0\/255.255.255.0" ], "ip_
range": "0.0.0.0-0.0.0.0" }, { "id": 1, "name": "PM", "subnets": [
"192.168.5.0\/255.255.255.0" ], "ip_range": "0.0.0.0-0.0.0.0" } ], "name": "Spoke2",
"topology_role": "spoke" }
Member: { "sn": "FG100D3G15801621", "ip_v4": "172.16.200.1", "port": 500, "slot": 1000,
"overlay": [ { "id": 0, "name": "QA", "subnets": [ "10.1.100.0\/255.255.255.0" ], "ip_
range": "0.0.0.0-0.0.0.0" }, { "id": 1, "name": "PM", "subnets": [
"10.2.100.0\/255.255.255.0" ], "ip_range": "0.0.0.0-0.0.0.0" } ], "name": "Spoke1",
"topology_role": "spoke" }
l Primary-Hub # diagnose vpn ocvpn show-meta
Topology :: auto
License :: full
Members :: 4
Max-free :: 3
FortiOS 6.4.2 Administration Guide 1340
Fortinet Inc.
VPN
l Primary-Hub # diagnose vpn ocvpn show-overlays
QA
PM
l Spoke1 # diagnose vpn tunnel list
list all ipsec tunnel in vd 0
------------------------------------------------------
name=_OCVPN2-0.0 ver=2 serial=c 172.16.200.1:0->172.16.200.4:0 dst_mtu=1500
bound_if=11 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/528 options[0210]=create_dev
frag-rfc accept_traffic=1
proxyid_num=3 child_num=0 refcnt=13 ilast=17 olast=17 ad=/0
stat: rxp=0 txp=0 rxb=0 txb=0
dpd: mode=on-idle on=1 idle=20000ms retry=3 count=0 seqno=29
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=_OCVPN2-0.0 proto=0 sa=1 ref=2 serial=1 auto-negotiate
src: 0:10.1.100.0/255.255.255.0:0
dst: 0:0.0.0.0/0.0.0.0:0
SA: ref=3 options=18227 type=00 soft=0 mtu=1438 expire=42299/0B replaywin=2048
seqno=1 esn=0 replaywin_lastseq=00000000 itn=0 qat=0
life: type=01 bytes=0/0 timeout=42899/43200
dec: spi=0484795d esp=aes key=16 10eeb76fadd49f00c333350d83509095
ah=sha1 key=20 971bde5dcfca7e52fd1573cb3489e9c855f6154e
enc: spi=dfcffaaa esp=aes key=16 d07a4dd683ee093af2dca9485aa436eb
ah=sha1 key=20 65369be35d5ecad8cae63557318419cd6005c230
dec:pkts/bytes=0/0, enc:pkts/bytes=0/0
proxyid=_OCVPN2-0.0_nat proto=0 sa=1 ref=2 serial=3 auto-negotiate
src: 0:172.16.101.101-172.16.101.101:0
dst: 0:0.0.0.0-255.255.255.255:0
SA: ref=3 options=18627 type=00 soft=0 mtu=1438 expire=42303/0B replaywin=2048
seqno=1 esn=0 replaywin_lastseq=00000000 itn=0 qat=0
life: type=01 bytes=0/0 timeout=42898/43200
dec: spi=04847961 esp=aes key=16 ea181036b02e8bc8711fb520b3e98a60
ah=sha1 key=20 b3c449d96d5d3f090975087a62447f6918ce7930
enc: spi=dfcffaac esp=aes key=16 f7ea5e42e9443698e6b8b32161ace40e
ah=sha1 key=20 a7e36dd1ec0bdb6eff0aa66e442707427400c700
dec:pkts/bytes=0/0, enc:pkts/bytes=0/0
proxyid=_OCVPN2-0.0_nat proto=0 sa=0 ref=2 serial=2 auto-negotiate
src: 0:0.0.0.0/0.0.0.0:0
dst: 0:0.0.0.0/0.0.0.0:0
------------------------------------------------------
name=_OCVPN2-1.0 ver=2 serial=e 172.16.200.1:0->172.16.200.2:0 dst_mtu=0
bound_if=11 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/528 options[0210]=create_dev
frag-rfc accept_traffic=1
proxyid_num=2 child_num=0 refcnt=10 ilast=599 olast=599 ad=/0
stat: rxp=0 txp=0 rxb=0 txb=0
dpd: mode=on-idle on=0 idle=20000ms retry=3 count=0 seqno=0
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=_OCVPN2-1.0 proto=0 sa=0 ref=2 serial=1 auto-negotiate
src: 0:10.1.100.0/255.255.255.0:0
dst: 0:0.0.0.0/0.0.0.0:0
proxyid=_OCVPN2-1.0_nat proto=0 sa=0 ref=2 serial=2 auto-negotiate
src: 0:0.0.0.0/0.0.0.0:0
dst: 0:0.0.0.0/0.0.0.0:0
FortiOS 6.4.2 Administration Guide 1341
Fortinet Inc.
VPN
------------------------------------------------------
name=_OCVPN2-0.1 ver=2 serial=b 172.16.200.1:0->172.16.200.4:0 dst_mtu=1500
bound_if=11 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/528 options[0210]=create_dev
frag-rfc accept_traffic=1
proxyid_num=3 child_num=0 refcnt=13 ilast=17 olast=17 ad=/0
stat: rxp=0 txp=0 rxb=0 txb=0
dpd: mode=on-idle on=1 idle=20000ms retry=3 count=0 seqno=29
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=_OCVPN2-0.1 proto=0 sa=1 ref=2 serial=1 auto-negotiate
src: 0:10.2.100.0/255.255.255.0:0
dst: 0:0.0.0.0/0.0.0.0:0
SA: ref=3 options=18227 type=00 soft=0 mtu=1438 expire=42297/0B replaywin=2048
seqno=1 esn=0 replaywin_lastseq=00000000 itn=0 qat=0
life: type=01 bytes=0/0 timeout=42897/43200
dec: spi=0484795e esp=aes key=16 106eaa95a2be64b566e7d1ca0aa88f6a
ah=sha1 key=20 5dddfba7070b03d5a31931d41db06ff96e7bc542
enc: spi=dfcffaab esp=aes key=16 29c774dbd7e54464ee298c381e71a94e
ah=sha1 key=20 c3da7372789c0a53b3752e69baaba1a42d798820
dec:pkts/bytes=0/0, enc:pkts/bytes=0/0
proxyid=_OCVPN2-0.1_nat proto=0 sa=1 ref=2 serial=3 auto-negotiate
src: 0:172.16.102.101-172.16.102.101:0
dst: 0:0.0.0.0-255.255.255.255:0
SA: ref=3 options=18627 type=00 soft=0 mtu=1438 expire=42307/0B replaywin=2048
seqno=1 esn=0 replaywin_lastseq=00000000 itn=0 qat=0
life: type=01 bytes=0/0 timeout=42902/43200
dec: spi=04847962 esp=aes key=16 b7daa5807cfa86906592a012a9d2478f
ah=sha1 key=20 39c8bb4c9e3f1e9e451f22c58a172ff01155055d
enc: spi=dfcffaad esp=aes key=16 2ecc644def4cebe6b0c4b7729da43d8e
ah=sha1 key=20 469c6f319e83bd73468f55d430566afcd6215138
dec:pkts/bytes=0/0, enc:pkts/bytes=0/0
proxyid=_OCVPN2-0.1_nat proto=0 sa=0 ref=2 serial=2 auto-negotiate
src: 0:0.0.0.0/0.0.0.0:0
dst: 0:0.0.0.0/0.0.0.0:0
------------------------------------------------------
name=_OCVPN2-1.1 ver=2 serial=d 172.16.200.1:0->172.16.200.2:0 dst_mtu=0
bound_if=11 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/528 options[0210]=create_dev
frag-rfc accept_traffic=1
proxyid_num=2 child_num=0 refcnt=10 ilast=599 olast=599 ad=/0
stat: rxp=0 txp=0 rxb=0 txb=0
dpd: mode=on-idle on=0 idle=20000ms retry=3 count=0 seqno=0
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=_OCVPN2-1.1 proto=0 sa=0 ref=2 serial=1 auto-negotiate
src: 0:10.2.100.0/255.255.255.0:0
dst: 0:0.0.0.0/0.0.0.0:0
proxyid=_OCVPN2-1.1_nat proto=0 sa=0 ref=2 serial=2 auto-negotiate
src: 0:0.0.0.0/0.0.0.0:0
dst: 0:0.0.0.0/0.0.0.0:0
l Spoke1 # get router info routing-table all
Routing table for VRF=0
Codes: K - kernel, C - connected, S - static, R - RIP, B - BGP
O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
FortiOS 6.4.2 Administration Guide 1342
Fortinet Inc.
VPN
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default
S* 0.0.0.0/0 [10/0] via 172.16.200.254, port1
C 10.1.100.0/24 is directly connected, dmz
C 10.2.100.0/24 is directly connected, loop
C 11.101.1.0/24 is directly connected, wan1
C 11.102.1.0/24 is directly connected, wan2
S 172.16.101.0/24 [20/0] is directly connected, _OCVPN2-0.1
C 172.16.101.101/32 is directly connected, _OCVPN2-0.1
C 172.16.200.0/24 is directly connected, port1
S 172.16.102.0/24 [20/0] is directly connected, _OCVPN2-0.0
C 172.16.102.101/32 is directly connected, _OCVPN2-0.0
S 192.168.4.0/24 [20/0] is directly connected, _OCVPN2-0.0
S 192.168.5.0/24 [20/0] is directly connected, _OCVPN2-0.1
l Spoke1 # show firewall policy
..............................
edit 9
set name "_OCVPN2-1.1_nat"
set uuid 3f7a84b8-3d36-51e9-ee97-8f418c91e666
set srcintf "any"
set dstintf "_OCVPN2-1.1"
set srcaddr "all"
set dstaddr "_OCVPN2-1.1_remote_networks"
set action accept
set schedule "always"
set service "ALL"
set comments "Generated by OCVPN Cloud Service."
set nat enable
next
edit 12
set name "_OCVPN2-1.0_nat"
set uuid 3fafec98-3d36-51e9-80c0-5d99325bad83
set srcintf "any"
set dstintf "_OCVPN2-1.0"
set srcaddr "all"
set dstaddr "_OCVPN2-1.0_remote_networks"
set action accept
set schedule "always"
set service "ALL"
set comments "Generated by OCVPN Cloud Service."
set nat enable
next
.................................
FortiOS 6.4.2 Administration Guide 1343
Fortinet Inc.
VPN
ADVPN
Auto-Discovery VPN (ADVPN) allows the central hub to dynamically inform spokes about a better path for traffic
between two spokes.
The following topics provide instructions on configuring ADVPN:
l IPsec VPN wizard hub-and-spoke ADVPN support on page 1344
l ADVPN with BGP as the routing protocol on page 1348
l ADVPN with OSPF as the routing protocol on page 1357
l ADVPN with RIP as the routing protocol on page 1366
l UDP hole punching for spokes behind NAT on page 1375
IPsec VPN wizard hub-and-spoke ADVPN support
When using the IPsec VPN wizard to create a hub and spoke VPN, multiple local interfaces can be selected. At the end
of the wizard, changes can be reviewed, real-time updates can be made to the local address group and tunnel interface,
and easy configuration keys can be copied for configuring the spokes.
When editing a VPN tunnel, the Hub & Spoke Topology section provides access to the easy configuration keys for the
spokes, and allows you to add more spokes.
This example shows the configuration of a hub with two spokes.
FortiOS 6.4.2 Administration Guide 1344
Fortinet Inc.
VPN
To configure the hub:
1. Go to VPN > IPsec Wizard.
2. Go through the steps of the wizard:
a. VPN Setup:
Name hub
Template Type Hub-and-Spoke
Role Hub
b. Authentication:
Incoming Interface port1
Authentication method Pre-shared Key
Pre-shared key <key>
c. Tunnel Interface:
Tunnel IP 10.10.1.1
Remote IP/netmask 10.10.1.2/24
d. Policy & Routing:
Multiple local interfaces and subnets can be configured.
Local AS 65400
Local interface port3
port4
Local subnets 174.16.101.0/24
173.1.1.0/24
Spoke #1 tunnel IP 10.10.1.3
Spoke #2 tunnel IP 10.10.1.4
FortiOS 6.4.2 Administration Guide 1345
Fortinet Inc.
VPN
e. Review Settings:
Confirm that the settings look correct, then click Create.
3. The summary shows details about the set up hub:
l The Local address group and Tunnel interface can be edited directly on this page.
l Spoke easy configuration keys can be used to quickly configure the spokes.
4. Click Show Tunnel List to go to VPN > IPsec Tunnels.
5. Edit the VPN tunnel to add more spokes and to copy the spokes' easy configuration keys.
FortiOS 6.4.2 Administration Guide 1346
Fortinet Inc.
VPN
To configure the spokes:
1. Go to VPN > IPsec Wizard.
2. On the VPN Setup page of the wizard, enter the following:
Name spoke1
Template Type Hub-and-Spoke
Role Spoke
3. In the Easy configuration key field, paste the Spoke #1 key from the hub FortiGate, click Apply, then click Next.
4. Adjust the Authentication settings as required, enter the Pre-shared key, then click Next.
5. Adjust the Tunnel Interface settings as required, then click Next.
6. Configure the Policy & Routing settings, then click Next:
Local interface wan2
Local subnets 10.1.100.0/24
7. Review the settings, then click Create.
8. The summary shows details about the set up spoke. The Local address group and Tunnel interface can be edited
directly on this page.
9. Follow the same steps to configure the second spoke.
To check that the tunnels are created and working:
1. On the hub FortiGate, go to Dashboard > Network and expand the IPsec widget.
The tunnels to the spokes are established.
FortiOS 6.4.2 Administration Guide 1347
Fortinet Inc.
VPN
2. On a spoke, go to Dashboard > Network and expand the IPsec widget.
The tunnel to the hub and the spoke to spoke shortcut are established.
ADVPN with BGP as the routing protocol
This is a sample configuration of ADVPN with BGP as the routing protocol. The following options must be enabled for
this configuration:
l On the hub FortiGate, IPsec phase1-interface net-device disable must be run.
l IBGP must be used between the hub and spoke FortiGates.
l bgp neighbor-group/neighbor-range must be reused.
Because the GUI can only complete part of the configuration, we recommend using the CLI.
To configure ADVPN with BGP as the routing protocol using the CLI:
1. Configure hub FortiGate's WAN, internal interface, and static route.
config system interface
edit "port9"
set alias "WAN"
set ip 22.1.1.1 255.255.255.0
next
edit "port10"
FortiOS 6.4.2 Administration Guide 1348
Fortinet Inc.
VPN
set alias "Internal"
set ip 172.16.101.1 255.255.255.0
next
end
config router static
edit 1
set gateway 22.1.1.2
set device "port9"
next
end
2. Configure the hub FortiGate.
a. Configure the hub FortiGate IPsec phase1-interface and phase2-interface.
config vpn ipsec phase1-interface
edit "advpn-hub"
set type dynamic
set interface "port9"
set peertype any
set net-device disable
set proposal aes128-sha256 aes256-sha256 3des-sha256 aes128-sha1 aes256-sha1
3des-sha1
set add-route disable
set dpd on-idle
set auto-discovery-sender enable
set tunnel-search nexthop
set psksecret sample
set dpd-retryinterval 5
next
end
config vpn ipsec phase2-interface
edit "advpn-hub"
set phase1name "advpn-hub"
set proposal aes128-sha1 aes256-sha1 3des-sha1 aes128-sha256 aes256-sha256
3des-sha256
next
end
b. Configure the hub FortiGate firewall policy.
config firewall policy
edit 1
set name "spoke2hub"
set srcintf "advpn-hub"
set dstintf "port10"
set srcaddr "all"
set dstaddr "172.16.101.0"
set action accept
set schedule "always"
set service "ALL"
next
edit 2
set name "spoke2spoke"
set srcintf "advpn-hub"
set dstintf "advpn-hub"
set srcaddr "all"
set dstaddr "all"
FortiOS 6.4.2 Administration Guide 1349
Fortinet Inc.
VPN
set action accept
set schedule "always"
set service "ALL"
next
end
c. Configure the hub FortiGate's IPsec tunnel interface IP address.
config system interface
edit "advpn-hub1"
set ip 10.10.10.254 255.255.255.255
set remote-ip 10.10.10.253 255.255.255.0
next
end
d. Configure the hub FortiGate's BGP.
config router bgp
set as 65412
config neighbor-group
edit "advpn"
set link-down-failover enable
set remote-as 65412
set route-reflector-client enable
next
end
config neighbor-range
edit 1
set prefix 10.10.10.0 255.255.255.0
set neighbor-group "advpn"
next
end
config network
edit 1
set prefix 172.16.101.0 255.255.255.0
next
end
end
3. Configure the spoke FortiGates.
a. Configure the spoke FortiGates' WAN, internal interfaces, and static routes.
i. Configure Spoke1.
config system interface
edit "wan1"
set alias "primary_WAN"
set ip 15.1.1.2 255.255.255.0
next
edit "wan2"
set alias "secondary_WAN"
set ip 12.1.1.2 255.255.255.0
next
edit "internal"
set ip 10.1.100.1 255.255.255.0
next
end
config router static
edit 1
FortiOS 6.4.2 Administration Guide 1350
Fortinet Inc.
VPN
set gateway 12.1.1.1
set device "wan2"
set distance 15
next
edit 2
set gateway 15.1.1.1
set device "wan1"
next
end
ii. Configure the Spoke2.
config system interface
edit "wan1"
set alias "primary_WAN"
set ip 13.1.1.2 255.255.255.0
next
edit "wan2"
set alias "secondary_WAN"
set ip 17.1.1.2 255.255.255.0
next
edit "internal"
set ip 192.168.4.1 255.255.255.0
next
end
config router static
edit 1
set gateway 17.1.1.1
set device "wan2"
set distance 15
next
edit 2
set gateway 13.1.1.1
set device "wan1"
next
end
b. Configure the spoke FortiGates' IPsec phase1-interface and phase2-interface.
i. Configure Spoke1.
config vpn ipsec phase1-interface
edit "spoke1"
set interface "wan1"
set peertype any
set net-device enable
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
set add-route disable
set dpd on-idle
set auto-discovery-receiver enable
set remote-gw 22.1.1.1
set psksecret sample
set dpd-retryinterval 5
next
edit "spoke1_backup"
set interface "wan2"
set peertype any
set net-device enable
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
FortiOS 6.4.2 Administration Guide 1351
Fortinet Inc.
VPN
set add-route disable
set dpd on-idle
set auto-discovery-receiver enable
set remote-gw 22.1.1.1
set monitor "spoke1"
set psksecret sample
set dpd-retryinterval 5
next
end
config vpn ipsec phase2-interface
edit "spoke1"
set phase1name "spoke1"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256
aes128gcm aes256gcm chacha20poly1305
set auto-negotiate enable
next
edit "spoke1_backup"
set phase1name "spoke1_backup"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256
aes128gcm aes256gcm chacha20poly1305
set auto-negotiate enable
next
end
ii. Configure Spoke2.
config vpn ipsec phase1-interface
edit "spoke2"
set interface "wan1"
set peertype any
set net-device enable
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
set add-route disable
set dpd on-idle
set auto-discovery-receiver enable
set remote-gw 22.1.1.1
set psksecret sample
set dpd-retryinterval 5
next
edit "spoke2_backup"
set interface "wan2"
set peertype any
set net-device enable
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
set add-route disable
set dpd on-idle
set auto-discovery-receiver enable
set remote-gw 22.1.1.1
set monitor "spoke2"
set psksecret sample
set dpd-retryinterval 5
next
end
config vpn ipsec phase2-interface
edit "spoke2"
set phase1name "spoke2"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256
FortiOS 6.4.2 Administration Guide 1352
Fortinet Inc.
VPN
aes128gcm aes256gcm chacha20poly1305
set auto-negotiate enable
next
edit "spoke2_backup"
set phase1name "spoke2_backup"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256
aes128gcm aes256gcm chacha20poly1305
set auto-negotiate enable
next
end
c. Configure the spoke FortiGates' firewall policies.
i. Configure Spoke1.
config firewall policy
edit 1
set name "outbound_advpn"
set srcintf "internal"
set dstintf "spoke1" "spoke1_backup"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
next
edit 2
set name "inbound_advpn"
set srcintf "spoke1" "spoke1_backup"
set dstintf "internal"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
next
end
ii. Configure Spoke2.
config firewall policy
edit 1
set name "outbound_advpn"
set srcintf "internal"
set dstintf "spoke2" "spoke2_backup"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
next
edit 2
set name "inbound_advpn"
set srcintf "spoke2" "spoke2_backup"
set dstintf "internal"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
FortiOS 6.4.2 Administration Guide 1353
Fortinet Inc.
VPN
set service "ALL"
next
end
d. Configure the spoke FortiGates' tunnel interface IP addresses.
i. Configure Spoke1.
config system interface
edit "spoke1"
set ip 10.10.10.1 255.255.255.255
set remote-ip 10.10.10.254 255.255.255.0
next
edit "spoke1_backup"
set ip 10.10.10.2 255.255.255.255
set remote-ip 10.10.10.254 255.255.255.0
next
end
ii. Configure Spoke2.
config system interface
edit "spoke2"
set ip 10.10.10.3 255.255.255.255
set remote-ip 10.10.10.254 255.255.255.0
next
edit "spoke2_backup"
set ip 10.10.10.4 255.255.255.255
set remote-ip 10.10.10.254 255.255.255.0
next
end
e. Configure the spoke FortiGates' BGP.
i. Configure Spoke1.
config router bgp
set as 65412
config neighbor
edit "10.10.10.254"
set advertisement-interval 1
set link-down-failover enable
set remote-as 65412
next
end
config network
edit 1
set prefix 10.1.100.0 255.255.255.0
next
end
end
ii. Configure Spoke2.
config router bgp
set as 65412
config neighbor
edit "10.10.10.254"
set advertisement-interval 1
set link-down-failover enable
set remote-as 65412
FortiOS 6.4.2 Administration Guide 1354
Fortinet Inc.
VPN
next
end
config network
edit 1
set prefix 192.168.4.0 255.255.255.0
next
end
end
4. Run diagnose and get commands run on Spoke1 to check VPN and BGP states.
a. Run the diagnose vpn tunnel list command on Spoke1. The system should return the following:
list all ipsec tunnel in vd 0
----
name=spoke1 ver=1 serial=2 15.1.1.2:0->22.1.1.1:0
bound_if=7 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/536 options[0218]=npu
create_dev frag-rfc accept_traffic=1
proxyid_num=1 child_num=1 refcnt=19 ilast=1 olast=1 ad=r/2
stat: rxp=1 txp=160 rxb=16428 txb=8969
dpd: mode=on-idle on=1 idle=5000ms retry=3 count=0 seqno=628
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=spoke1 proto=0 sa=1 ref=6 serial=1 auto-negotiate adr
src: 0:0.0.0.0/0.0.0.0:0
dst: 0:0.0.0.0/0.0.0.0:0
SA: ref=6 options=1a227 type=00 soft=0 mtu=1438 expire=1225/0B replaywin=1024
seqno=a1 esn=0 replaywin_lastseq=00000002 itn=0
life: type=01 bytes=0/0 timeout=2369/2400
dec: spi=c53a8f5b esp=aes key=16 cbe88682ad896a69290027b6dd8f7162
ah=sha1 key=20 7bb704b388f83783ac76c2ab0b6c9f7dcf78e93b
enc: spi=6e3633fc esp=aes key=16 1a0da3f4deed3d16becc9dda57537355
ah=sha1 key=20 368544044bd9b82592d72476ff93d5055056da8d
dec:pkts/bytes=1/16364, enc:pkts/bytes=160/19168
npu_flag=03 npu_rgwy=22.1.1.1 npu_lgwy=15.1.1.2 npu_selid=1 dec_npuid=1 enc_npuid=1
----
name=spoke1_backup ver=1 serial=1 12.1.1.2:0->22.1.1.1:0
bound_if=6 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/536 options[0218]=npu
create_dev frag-rfc accept_traffic=0
proxyid_num=1 child_num=0 refcnt=11 ilast=0 olast=0 ad=/0
stat: rxp=0 txp=0 rxb=0 txb=0
dpd: mode=on-idle on=0 idle=5000ms retry=3 count=0 seqno=0
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=spoke1_backup proto=0 sa=0 ref=2 serial=1 auto-negotiate adr
src: 0:0.0.0.0/0.0.0.0:0
dst: 0:0.0.0.0/0.0.0.0:0
b. Run the get router info bgp summary command on Spoke1. The system should return the following:
BGP router identifier 7.7.7.7, local AS number 65412
BGP table version is 2
1 BGP AS-PATH entries
0 BGP community entries
Neighbor V AS [[QualityAssurance62/MsgRcvd]]
[[QualityAssurance62/MsgSent]] [[QualityAssurance62/TblVer]] InQ OutQ Up/Down
State/PfxRcd
FortiOS 6.4.2 Administration Guide 1355
Fortinet Inc.
VPN
10.10.10.254 1. 65412 143 142 1. 1. 1.
00:24:45 2
Total number of neighbors 1
c. Run the get router info routing-table bgp command on Spoke1. The system should return the
following:
Routing table for VRF=0
B 172.16.101.0/24 [200/0] via 10.10.10.254, spoke1, 00:23:57
B 192.168.4.0/24 [200/0] via 10.10.10.254, spoke1, 00:22:03
d. Generate traffic between the spokes and check the shortcut tunnel and routing table. Run the diagnose vpn
tunnel list command on Spoke1. The system should return the following:
list all ipsec tunnel in vd 0
----
name=spoke1 ver=1 serial=2 15.1.1.2:0->22.1.1.1:0
bound_if=7 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/536 options[0218]=npu
create_dev frag-rfc accept_traffic=1
proxyid_num=1 child_num=1 refcnt=19 ilast=2 olast=2 ad=r/2
stat: rxp=1 txp=268 rxb=16428 txb=31243
dpd: mode=on-idle on=1 idle=5000ms retry=3 count=0 seqno=714
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=spoke1 proto=0 sa=1 ref=6 serial=1 auto-negotiate adr
src: 0:0.0.0.0/0.0.0.0:0
dst: 0:0.0.0.0/0.0.0.0:0
SA: ref=6 options=1a227 type=00 soft=0 mtu=1438 expire=345/0B replaywin=1024
seqno=10d esn=0 replaywin_lastseq=00000002 itn=0
life: type=01 bytes=0/0 timeout=2369/2400
dec: spi=c53a8f5b esp=aes key=16 cbe88682ad896a69290027b6dd8f7162
ah=sha1 key=20 7bb704b388f83783ac76c2ab0b6c9f7dcf78e93b
enc: spi=6e3633fc esp=aes key=16 1a0da3f4deed3d16becc9dda57537355
ah=sha1 key=20 368544044bd9b82592d72476ff93d5055056da8d
dec:pkts/bytes=1/16364, enc:pkts/bytes=268/48320
npu_flag=03 npu_rgwy=22.1.1.1 npu_lgwy=15.1.1.2 npu_selid=1 dec_npuid=1 enc_npuid=1
----
name=spoke1_backup ver=1 serial=1 12.1.1.2:0->22.1.1.1:0
bound_if=6 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/536 options[0218]=npu
create_dev frag-rfc accept_traffic=0
proxyid_num=1 child_num=0 refcnt=11 ilast=8 olast=8 ad=/0
stat: rxp=0 txp=0 rxb=0 txb=0
dpd: mode=on-idle on=0 idle=5000ms retry=3 count=0 seqno=0
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=spoke1_backup proto=0 sa=0 ref=2 serial=1 auto-negotiate adr
src: 0:0.0.0.0/0.0.0.0:0
dst: 0:0.0.0.0/0.0.0.0:0
----
name=spoke1_0 ver=1 serial=9 15.1.1.2:4500->13.1.1.2:4500
bound_if=7 lgwy=static/1 tun=intf/0 mode=dial_inst/3 encap=none/728 options[02d8]=npu
create_dev no-sysctl rgwy-chg frag-rfc accept_traffic=1
parent=spoke1 index=0
proxyid_num=1 child_num=0 refcnt=17 ilast=4 olast=4 ad=r/2
stat: rxp=1 txp=100 rxb=112 txb=4686
dpd: mode=on-idle on=1 idle=5000ms retry=3 count=0 seqno=231
FortiOS 6.4.2 Administration Guide 1356
Fortinet Inc.
VPN
natt: mode=keepalive draft=32 interval=10 remote_port=4500
proxyid=spoke1 proto=0 sa=1 ref=5 serial=1 auto-negotiate adr
src: 0:0.0.0.0/0.0.0.0:0
dst: 0:0.0.0.0/0.0.0.0:0
SA: ref=6 options=1a227 type=00 soft=0 mtu=1422 expire=447/0B replaywin=1024
seqno=65 esn=0 replaywin_lastseq=00000002 itn=0
life: type=01 bytes=0/0 timeout=2368/2400
dec: spi=c53a8f5c esp=aes key=16 73fd9869547475db78851e6c057ad9b7
ah=sha1 key=20 6ad3a5b1028f6b33c82ba494a370f13c7f462635
enc: spi=79cb0f2b esp=aes key=16 52ab0acdc830d58c00e5956a6484654a
ah=sha1 key=20 baa82aba4106dc60618f6fe95570728656799239
dec:pkts/bytes=1/46, enc:pkts/bytes=100/11568
npu_flag=03 npu_rgwy=13.1.1.2 npu_lgwy=15.1.1.2 npu_selid=5 dec_npuid=1 enc_npuid=1
e. Run the get router info routing-tale bgp command. The system should return the following:
Routing table for VRF=0
B 172.16.101.0/24 [200/0] via 10.10.10.254, spoke1, 00:23:57
B 192.168.4.0/24 [200/0] via 10.10.10.3, spoke1_0 , 00:22:03
ADVPN with OSPF as the routing protocol
This is a sample configuration of ADVPN with OSPF as the routing protocol. The following options must be enabled for
this configuration:
l On the hub FortiGate, IPsec phase1-interface net-device enable must be run.
l OSPF must be used between the hub and spoke FortiGates.
Because the GUI can only complete part of the configuration, we recommend using the CLI.
To configure ADVPN with OSPF as the routing protocol using the CLI:
1. Configure hub FortiGate's WAN, internal interface, and static route.
config system interface
edit "port9"
set alias "WAN"
set ip 22.1.1.1 255.255.255.0
FortiOS 6.4.2 Administration Guide 1357
Fortinet Inc.
VPN
next
edit "port10"
set alias "Internal"
set ip 172.16.101.1 255.255.255.0
next
end
config router static
edit 1
set gateway 22.1.1.2
set device "port9"
next
end
2. Configure the hub FortiGate.
a. Configure the hub FortiGate IPsec phase1-interface and phase2-interface.
config vpn ipsec phase1-interface
edit "advpn-hub"
set type dynamic
set interface "port9"
set peertype any
set net-device enable
set proposal aes128-sha256 aes256-sha256 3des-sha256 aes128-sha1 aes256-sha1
3des-sha1
set add-route disable
set dpd on-idle
set auto-discovery-sender enable
set tunnel-search nexthop
set psksecret sample
set dpd-retryinterval 5
next
end
config vpn ipsec phase2-interface
edit "advpn-hub"
set phase1name "advpn-hub"
set proposal aes128-sha1 aes256-sha1 3des-sha1 aes128-sha256 aes256-sha256
3des-sha256
next
end
b. Configure the hub FortiGate firewall policy.
config firewall policy
edit 1
set name "spoke2hub"
set srcintf "advpn-hub"
set dstintf "port10"
set srcaddr "all"
set dstaddr "172.16.101.0"
set action accept
set schedule "always"
set service "ALL"
next
edit 2
set name "spoke2spoke"
set srcintf "advpn-hub"
set dstintf "advpn-hub"
FortiOS 6.4.2 Administration Guide 1358
Fortinet Inc.
VPN
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
next
end
c. Configure the hub FortiGate's IPsec tunnel interface IP address.
config system interface
edit "advpn-hub1"
set ip 10.10.10.254 255.255.255.255
set remote-ip 10.10.10.253 255.255.255.0
next
end
d. Configure the hub FortiGate's OSPF.
config router ospf
set router-id 1.1.1.1
config area
edit 0.0.0.0
next
end
config network
edit 1
set prefix 10.10.10.0 255.255.255.0
next
edit 2
set prefix 172.16.101.0 255.255.255.0
next
end
end
3. Configure the spoke FortiGates.
a. Configure the spoke FortiGates' WAN, internal interfaces, and static routes.
i. Configure Spoke1.
config system interface
edit "wan1"
set alias "primary_WAN"
set ip 15.1.1.2 255.255.255.0
next
edit "wan2"
set alias "secondary_WAN"
set ip 12.1.1.2 255.255.255.0
next
edit "internal"
set ip 10.1.100.1 255.255.255.0
next
end
config router static
edit 1
set gateway 12.1.1.1
set device "wan2"
set distance 15
next
FortiOS 6.4.2 Administration Guide 1359
Fortinet Inc.
VPN
edit 2
set gateway 15.1.1.1
set device "wan1"
next
end
ii. Configure the Spoke2.
config system interface
edit "wan1"
set alias "primary_WAN"
set ip 13.1.1.2 255.255.255.0
next
edit "wan2"
set alias "secondary_WAN"
set ip 17.1.1.2 255.255.255.0
next
edit "internal"
set ip 192.168.4.1 255.255.255.0
next
end
config router static
edit 1
set gateway 17.1.1.1
set device "wan2"
set distance 15
next
edit 2
set gateway 13.1.1.1
set device "wan1"
next
end
b. Configure the spoke FortiGates' IPsec phase1-interface and phase2-interface.
i. Configure Spoke1.
config vpn ipsec phase1-interface
edit "spoke1"
set interface "wan1"
set peertype any
set net-device enable
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
set add-route disable
set dpd on-idle
set auto-discovery-receiver enable
set remote-gw 22.1.1.1
set psksecret sample
set dpd-retryinterval 5
next
edit "spoke1_backup"
set interface "wan2"
set peertype any
set net-device enable
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
set add-route disable
set dpd on-idle
set auto-discovery-receiver enable
set remote-gw 22.1.1.1
FortiOS 6.4.2 Administration Guide 1360
Fortinet Inc.
VPN
set monitor "spoke1"
set psksecret sample
set dpd-retryinterval 5
next
end
config vpn ipsec phase2-interface
edit "spoke1"
set phase1name "spoke1"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256
aes128gcm aes256gcm chacha20poly1305
set auto-negotiate enable
next
edit "spoke1_backup"
set phase1name "spoke1_backup"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256
aes128gcm aes256gcm chacha20poly1305
set auto-negotiate enable
next
end
ii. Configure Spoke2.
config vpn ipsec phase1-interface
edit "spoke2"
set interface "wan1"
set peertype any
set net-device enable
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
set add-route disable
set dpd on-idle
set auto-discovery-receiver enable
set remote-gw 22.1.1.1
set psksecret sample
set dpd-retryinterval 5
next
edit "spoke2_backup"
set interface "wan2"
set peertype any
set net-device enable
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
set add-route disable
set dpd on-idle
set auto-discovery-receiver enable
set remote-gw 22.1.1.1
set monitor "spoke2"
set psksecret sample
set dpd-retryinterval 5
next
end
config vpn ipsec phase2-interface
edit "spoke2"
set phase1name "spoke2"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256
aes128gcm aes256gcm chacha20poly1305
set auto-negotiate enable
next
edit "spoke2_backup"
FortiOS 6.4.2 Administration Guide 1361
Fortinet Inc.
VPN
set phase1name "spoke2_backup"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256
aes128gcm aes256gcm chacha20poly1305
set auto-negotiate enable
next
end
c. Configure the spoke FortiGates' firewall policies.
i. Configure Spoke1.
config firewall policy
edit 1
set name "outbound_advpn"
set srcintf "internal"
set dstintf "spoke1" "spoke1_backup"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
next
edit 2
set name "inbound_advpn"
set srcintf "spoke1" "spoke1_backup"
set dstintf "internal"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
next
end
ii. Configure Spoke2.
config firewall policy
edit 1
set name "outbound_advpn"
set srcintf "internal"
set dstintf "spoke2" "spoke2_backup"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
next
edit 2
set name "inbound_advpn"
set srcintf "spoke2" "spoke2_backup"
set dstintf "internal"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
next
end
FortiOS 6.4.2 Administration Guide 1362
Fortinet Inc.
VPN
d. Configure the spoke FortiGates' tunnel interface IP addresses.
i. Configure Spoke1.
config system interface
edit "spoke1"
set ip 10.10.10.1 255.255.255.255
set remote-ip 10.10.10.254 255.255.255.0
next
edit "spoke1_backup"
set ip 10.10.10.2 255.255.255.255
set remote-ip 10.10.10.254 255.255.255.0
next
end
ii. Configure Spoke2.
config system interface
edit "spoke2"
set ip 10.10.10.3 255.255.255.255
set remote-ip 10.10.10.254 255.255.255.0
next
edit "spoke2_backup"
set ip 10.10.10.4 255.255.255.255
set remote-ip 10.10.10.254 255.255.255.0
next
end
e. Configure the spoke FortiGates' OSPF.
i. Configure Spoke1.
config router ospf
set router-id 7.7.7.7
config area
edit 0.0.0.0
next
end
config network
edit 1
set prefix 10.10.10.0 255.255.255.0
next
edit 2
set prefix 10.1.100.0 255.255.255.0
next
end
end
ii. Configure Spoke2.
config router ospf
set router-id 8.8.8.8
config area
edit 0.0.0.0
next
end
config network
edit 1
set prefix 10.10.10.0 255.255.255.0
next
edit 2
FortiOS 6.4.2 Administration Guide 1363
Fortinet Inc.
VPN
set prefix 192.168.4.0 255.255.255.0
next
end
end
4. Run diagnose and get commands on Spoke1 to check VPN and OSPF states.
a. Run the diagnose vpn tunnel list command on Spoke1. The system should return the following:
list all ipsec tunnel in vd 0
----
name=spoke1 ver=1 serial=2 15.1.1.2:0->22.1.1.1:0
bound_if=7 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/536 options[0218]=npu
create_dev frag-rfc accept_traffic=1
proxyid_num=1 child_num=1 refcnt=19 ilast=5 olast=2 ad=r/2
stat: rxp=1 txp=263 rxb=16452 txb=32854
dpd: mode=on-idle on=1 idle=5000ms retry=3 count=0 seqno=2283
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=spoke1 proto=0 sa=1 ref=5 serial=1 auto-negotiate adr
src: 0:0.0.0.0/0.0.0.0:0
dst: 0:0.0.0.0/0.0.0.0:0
SA: ref=6 options=1a227 type=00 soft=0 mtu=1438 expire=1057/0B replaywin=1024
seqno=108 esn=0 replaywin_lastseq=00000003 itn=0
life: type=01 bytes=0/0 timeout=2371/2400
dec: spi=c53a8f78 esp=aes key=16 7cc50c5c9df1751f6497a4ad764c5e9a
ah=sha1 key=20 269292ddbf7309a6fc05871e63ed8a5297b5c9a1
enc: spi=6e363612 esp=aes key=16 42bd49bced1e85cf74a24d97f10eb601
ah=sha1 key=20 13964f166aad48790c2e551d6df165d7489f524b
dec:pkts/bytes=1/16394, enc:pkts/bytes=263/50096
npu_flag=03 npu_rgwy=22.1.1.1 npu_lgwy=15.1.1.2 npu_selid=1 dec_npuid=1 enc_npuid=1
----
name=spoke1_backup ver=1 serial=1 12.1.1.2:0->22.1.1.1:0
bound_if=6 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/536 options[0218]=npu
create_dev frag-rfc accept_traffic=0
proxyid_num=1 child_num=0 refcnt=11 ilast=8 olast=8 ad=/0
stat: rxp=0 txp=0 rxb=0 txb=0
dpd: mode=on-idle on=0 idle=5000ms retry=3 count=0 seqno=0
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=spoke1_backup proto=0 sa=0 ref=2 serial=1 auto-negotiate adr
src: 0:0.0.0.0/0.0.0.0:0
dst: 0:0.0.0.0/0.0.0.0:0
b. Run the get router info ospf neighbor command on Spoke1. The system should return the following:
OSPF process 0, VRF 0: Neighbor ID Pri State Dead Time Address Interface 8.8.8.8 1.
Full/ - 00:00:35 10.10.10.254 spoke1 1.1.1.1 1. Full/ - 00:00:35 10.10.10.254 spoke1
c. Run the get router info routing-table ospf command on Spoke1. The system should return the
following:
Routing table for VRF=0
O 172.16.101.0/24 [110/110] via 10.10.10.254, spoke1, 00:23:23
O 192.168.4.0/24 [110/110] via 10.10.10.254, spoke1, 00:22:35
d. Generate traffic between the spokes, then check the shortcut tunnel and routing table. Run the diagnose
vpn tunnel list command on Spoke1. The system should return the following:
FortiOS 6.4.2 Administration Guide 1364
Fortinet Inc.
VPN
list all ipsec tunnel in vd 0
----
----
name=spoke1 ver=1 serial=2 15.1.1.2:0->22.1.1.1:0
bound_if=7 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/536 options[0218]=npu
create_dev frag-rfc accept_traffic=1
proxyid_num=1 child_num=1 refcnt=19 ilast=2 olast=2 ad=r/2
stat: rxp=1 txp=313 rxb=16452 txb=35912
dpd: mode=on-idle on=1 idle=5000ms retry=3 count=0 seqno=2303
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=spoke1 proto=0 sa=1 ref=3 serial=1 auto-negotiate adr
src: 0:0.0.0.0/0.0.0.0:0
dst: 0:0.0.0.0/0.0.0.0:0
SA: ref=6 options=1a227 type=00 soft=0 mtu=1438 expire=782/0B replaywin=1024
seqno=13a esn=0 replaywin_lastseq=00000003 itn=0
life: type=01 bytes=0/0 timeout=2371/2400
dec: spi=c53a8f78 esp=aes key=16 7cc50c5c9df1751f6497a4ad764c5e9a
ah=sha1 key=20 269292ddbf7309a6fc05871e63ed8a5297b5c9a1
enc: spi=6e363612 esp=aes key=16 42bd49bced1e85cf74a24d97f10eb601
ah=sha1 key=20 13964f166aad48790c2e551d6df165d7489f524b
dec:pkts/bytes=1/16394, enc:pkts/bytes=313/56432
npu_flag=03 npu_rgwy=22.1.1.1 npu_lgwy=15.1.1.2 npu_selid=1 dec_npuid=1 enc_npuid=1
----
name=spoke1_backup ver=1 serial=1 12.1.1.2:0->22.1.1.1:0
bound_if=6 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/536 options[0218]=npu
create_dev frag-rfc accept_traffic=0
proxyid_num=1 child_num=0 refcnt=11 ilast=13 olast=13 ad=/0
stat: rxp=0 txp=0 rxb=0 txb=0
dpd: mode=on-idle on=0 idle=5000ms retry=3 count=0 seqno=0
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=spoke1_backup proto=0 sa=0 ref=2 serial=1 auto-negotiate adr
src: 0:0.0.0.0/0.0.0.0:0
dst: 0:0.0.0.0/0.0.0.0:0
----
name=spoke1_0 ver=1 serial=e 15.1.1.2:4500->13.1.1.2:4500
bound_if=7 lgwy=static/1 tun=intf/0 mode=dial_inst/3 encap=none/728 options[02d8]=npu
create_dev no-sysctl rgwy-chg frag-rfc accept_traffic=1
parent=spoke1 index=0
proxyid_num=1 child_num=0 refcnt=19 ilast=4 olast=2 ad=r/2
stat: rxp=641 txp=1254 rxb=278648 txb=161536
dpd: mode=on-idle on=1 idle=5000ms retry=3 count=0 seqno=184
natt: mode=keepalive draft=32 interval=10 remote_port=4500
proxyid=spoke1_backup proto=0 sa=1 ref=10 serial=1 auto-negotiate adr
src: 0:0.0.0.0/0.0.0.0:0
dst: 0:0.0.0.0/0.0.0.0:0
SA: ref=6 options=1a227 type=00 soft=0 mtu=1422 expire=922/0B replaywin=1024
seqno=452 esn=0 replaywin_lastseq=00000280 itn=0
life: type=01 bytes=0/0 timeout=2370/2400
dec: spi=c53a8f79 esp=aes key=16 324f8cf840ba6722cc7abbba46b34e0e
ah=sha1 key=20 a40e9aac596b95c4cd83a7f6372916a5ef5aa505
enc: spi=ef3327b5 esp=aes key=16 5909d6066b303de4520d2b5ae2db1b61
ah=sha1 key=20 1a42f5625b5a335d8d5282fe83b5d6c6ff26b2a4
FortiOS 6.4.2 Administration Guide 1365
Fortinet Inc.
VPN
dec:pkts/bytes=641/278568, enc:pkts/bytes=1254/178586
npu_flag=03 npu_rgwy=13.1.1.2 npu_lgwy=15.1.1.2 npu_selid=a dec_npuid=1 enc_npuid=1
e. Run the get router info routing-tale ospf command. The system should return the following:
Routing table for VRF=0
O 172.16.101.0/24 [110/110] via 10.10.10.254, spoke1, 00:27:14
O 192.168.4.0/24 [110/110] via 10.10.10.3, spoke1_0, 00:26:26
ADVPN with RIP as the routing protocol
This is a sample configuration of ADVPN with RIP as routing protocol. The following options must be enabled for this
configuration:
l On the hub FortiGate, IPsec phase1-interface net-device disable must be run.
l RIP must be used between the hub and spoke FortiGates.
l split-horizon-status enable must be run on the hub FortiGate.
Because the GUI can only complete part of the configuration, we recommend using the CLI.
To configure ADVPN with RIP as the routing protocol using the CLI:
1. In the CLI, configure hub FortiGate's WAN, internal interface, and static route.
config system interface
edit "port9"
set alias "WAN"
set ip 22.1.1.1 255.255.255.0
next
edit "port10"
set alias "Internal"
set ip 172.16.101.1 255.255.255.0
next
end
config router static
edit 1
set gateway 22.1.1.2
set device "port9"
FortiOS 6.4.2 Administration Guide 1366
Fortinet Inc.
VPN
next
end
2. Configure the hub FortiGate.
a. Configure the hub FortiGate IPsec phase1-interface and phase2-interface.
config vpn ipsec phase1-interface
edit "advpn-hub"
set type dynamic
set interface "port9"
set peertype any
set net-device disable
set proposal aes128-sha256 aes256-sha256 3des-sha256 aes128-sha1 aes256-sha1
3des-sha1
set add-route disable
set dpd on-idle
set auto-discovery-sender enable
set tunnel-search nexthop
set psksecret sample
set dpd-retryinterval 5
next
end
config vpn ipsec phase2-interface
edit "advpn-hub"
set phase1name "advpn-hub"
set proposal aes128-sha1 aes256-sha1 3des-sha1 aes128-sha256 aes256-sha256
3des-sha256
next
end
b. Configure the hub FortiGate firewall policy.
config firewall policy
edit 1
set name "spoke2hub"
set srcintf "advpn-hub"
set dstintf "port10"
set srcaddr "all"
set dstaddr "172.16.101.0"
set action accept
set schedule "always"
set service "ALL"
next
edit 2
set name "spoke2spoke"
set srcintf "advpn-hub"
set dstintf "advpn-hub"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
next
end
FortiOS 6.4.2 Administration Guide 1367
Fortinet Inc.
VPN
c. Configure the hub FortiGate's IPsec tunnel interface IP address.
config system interface
edit "advpn-hub1"
set ip 10.10.10.254 255.255.255.255
set remote-ip 10.10.10.253 255.255.255.0
next
end
d. Configure the hub FortiGate's RIP.
config router rip
set default-information-originate enable
config network
edit 1
set prefix 10.10.10.0 255.255.255.0
next
edit 2
set prefix 172.16.101.0 255.255.255.0
next
end
config interface
edit "advpn-hub"
set split-horizon-status disable
next
end
end
3. Configure the spoke FortiGates.
a. Configure the spoke FortiGates' WAN, internal interfaces, and static routes.
i. Configure Spoke1.
config system interface
edit "wan1"
set alias "primary_WAN"
set ip 15.1.1.2 255.255.255.0
next
edit "wan2"
set alias "secondary_WAN"
set ip 12.1.1.2 255.255.255.0
next
edit "internal"
set ip 10.1.100.1 255.255.255.0
next
end
config router static
edit 1
set gateway 12.1.1.1
set device "wan2"
set distance 15
next
edit 2
set gateway 15.1.1.1
set device "wan1"
next
end
FortiOS 6.4.2 Administration Guide 1368
Fortinet Inc.
VPN
ii. Configure the Spoke2.
config system interface
edit "wan1"
set alias "primary_WAN"
set ip 13.1.1.2 255.255.255.0
next
edit "wan2"
set alias "secondary_WAN"
set ip 17.1.1.2 255.255.255.0
next
edit "internal"
set ip 192.168.4.1 255.255.255.0
next
end
config router static
edit 1
set gateway 17.1.1.1
set device "wan2"
set distance 15
next
edit 2
set gateway 13.1.1.1
set device "wan1"
next
end
b. Configure the spoke FortiGates' IPsec phase1-interface and phase2-interface.
i. Configure Spoke1.
config vpn ipsec phase1-interface
edit "spoke1"
set interface "wan1"
set peertype any
set net-device enable
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
set add-route disable
set dpd on-idle
set auto-discovery-receiver enable
set remote-gw 22.1.1.1
set psksecret sample
set dpd-retryinterval 5
next
edit "spoke1_backup"
set interface "wan2"
set peertype any
set net-device enable
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
set add-route disable
set dpd on-idle
set auto-discovery-receiver enable
set remote-gw 22.1.1.1
set monitor "spoke1"
set psksecret sample
set dpd-retryinterval 5
next
end
FortiOS 6.4.2 Administration Guide 1369
Fortinet Inc.
VPN
config vpn ipsec phase2-interface
edit "spoke1"
set phase1name "spoke1"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256
aes128gcm aes256gcm chacha20poly1305
set auto-negotiate enable
next
edit "spoke1_backup"
set phase1name "spoke1_backup"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256
aes128gcm aes256gcm chacha20poly1305
set auto-negotiate enable
next
end
ii. Configure Spoke2.
config vpn ipsec phase1-interface
edit "spoke2"
set interface "wan1"
set peertype any
set net-device enable
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
set add-route disable
set dpd on-idle
set auto-discovery-receiver enable
set remote-gw 22.1.1.1
set psksecret sample
set dpd-retryinterval 5
next
edit "spoke2_backup"
set interface "wan2"
set peertype any
set net-device enable
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
set add-route disable
set dpd on-idle
set auto-discovery-receiver enable
set remote-gw 22.1.1.1
set monitor "spoke2"
set psksecret sample
set dpd-retryinterval 5
next
end
config vpn ipsec phase2-interface
edit "spoke2"
set phase1name "spoke2"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256
aes128gcm aes256gcm chacha20poly1305
set auto-negotiate enable
next
edit "spoke2_backup"
set phase1name "spoke2_backup"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256
aes128gcm aes256gcm chacha20poly1305
set auto-negotiate enable
FortiOS 6.4.2 Administration Guide 1370
Fortinet Inc.
VPN
next
end
c. Configure the spoke FortiGates' firewall policies.
i. Configure Spoke1.
config firewall policy
edit 1
set name "outbound_advpn"
set srcintf "internal"
set dstintf "spoke1" "spoke1_backup"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
next
edit 2
set name "inbound_advpn"
set srcintf "spoke1" "spoke1_backup"
set dstintf "internal"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
next
end
ii. Configure Spoke2.
config firewall policy
edit 1
set name "outbound_advpn"
set srcintf "internal"
set dstintf "spoke2" "spoke2_backup"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
next
edit 2
set name "inbound_advpn"
set srcintf "spoke2" "spoke2_backup"
set dstintf "internal"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
next
end
FortiOS 6.4.2 Administration Guide 1371
Fortinet Inc.
VPN
d. Configure the spoke FortiGates' tunnel interface IP addresses.
i. Configure Spoke1.
config system interface
edit "spoke1"
set ip 10.10.10.1 255.255.255.255
set remote-ip 10.10.10.254 255.255.255.0
next
edit "spoke1_backup"
set ip 10.10.10.2 255.255.255.255
set remote-ip 10.10.10.254 255.255.255.0
next
end
ii. Configure Spoke2.
config system interface
edit "spoke2"
set ip 10.10.10.3 255.255.255.255
set remote-ip 10.10.10.254 255.255.255.0
next
edit "spoke2_backup"
set ip 10.10.10.4 255.255.255.255
set remote-ip 10.10.10.254 255.255.255.0
next
end
e. Configure the spoke FortiGates' RIP.
i. Configure Spoke1.
config router rip
config network
edit 1
set prefix 10.10.10.0 255.255.255.0
next
edit 2
set prefix 10.1.100.0 255.255.255.0
next
end
end
ii. Configure Spoke2.
config router rip
config network
edit 1
set prefix 10.10.10.0 255.255.255.0
next
edit 2
set prefix 192.168.4.0 255.255.255.0
next
end
end
4. Run diagnose and get commands on Spoke1.
a. Run the diagnose vpn tunnel list command on Spoke1. The system should return the following:
list all ipsec tunnel in vd 0
----
FortiOS 6.4.2 Administration Guide 1372
Fortinet Inc.
VPN
name=spoke1 ver=1 serial=2 15.1.1.2:0->22.1.1.1:0
bound_if=7 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/536 options[0218]=npu
create_dev frag-rfc accept_traffic=1
proxyid_num=1 child_num=1 refcnt=17 ilast=2 olast=2 ad=r/2
stat: rxp=1 txp=87 rxb=200 txb=6208
dpd: mode=on-idle on=1 idle=5000ms retry=3 count=0 seqno=1040
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=spoke1 proto=0 sa=1 ref=4 serial=1 auto-negotiate adr
src: 0:0.0.0.0/0.0.0.0:0
dst: 0:0.0.0.0/0.0.0.0:0
SA: ref=7 options=1a227 type=00 soft=0 mtu=1438 expire=1793/0B replaywin=1024
seqno=57 esn=0 replaywin_lastseq=00000002 itn=0
life: type=01 bytes=0/0 timeout=2370/2400
dec: spi=c53a8f60 esp=aes key=16 6b54e32d54d039196a74d96e96d1cf14
ah=sha1 key=20 e4903474614eafc96eda6400a3a5e88bbcb26a7f
enc: spi=6e36349d esp=aes key=16 914a40a7993eda75c4dea2f42905f27d
ah=sha1 key=20 8040eb08342edea2dae5eee058fd054a46688267
dec:pkts/bytes=1/132, enc:pkts/bytes=86/11696
npu_flag=03 npu_rgwy=22.1.1.1 npu_lgwy=15.1.1.2 npu_selid=1 dec_npuid=1 enc_npuid=1
----
name=spoke1_backup ver=1 serial=1 12.1.1.2:0->22.1.1.1:0
bound_if=6 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/536 options[0218]=npu
create_dev frag-rfc accept_traffic=0
proxyid_num=1 child_num=0 refcnt=11 ilast=0 olast=0 ad=/0
stat: rxp=0 txp=0 rxb=0 txb=0
dpd: mode=on-idle on=0 idle=5000ms retry=3 count=0 seqno=0
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=spoke1_backup proto=0 sa=0 ref=2 serial=1 auto-negotiate adr
src: 0:0.0.0.0/0.0.0.0:0
dst: 0:0.0.0.0/0.0.0.0:0
b. Run the get router info rip database command on Spoke1. The system should return the following:
Codes: R - RIP, Rc - RIP connected, Rs - RIP static, K - Kernel,
C - Connected, S - Static, O - OSPF, I - IS-IS, B - BGP
Network Next Hop Metric From If Time
Rc 10.1.100.0/24 1. internal
Rc 10.10.10.2/32 1. spoke1
R 172.16.101.0/24 10.10.10.254 1. 10.10.10.254 spoke1 02:28
R 192.168.4.0/24 10.10.10.254 1. 10.10.10.254 spoke1 02:44
c. Run the get router info routing-table rip command on Spoke1. The system should return the
following:
Routing table for VRF=0
R 172.16.101.0/24 [120/2] via 10.10.10.254, spoke1, 00:08:38
R 192.168.4.0/24 [120/3] via 10.10.10.254, spoke1, 00:08:38
d. Generate traffic between the spokes, then check the shortcut tunnel and routing table. Run the diagnose
vpn tunnel list command on Spoke1. The system should return the following:
list all ipsec tunnel in vd 0
----
name=spoke1 ver=1 serial=2 15.1.1.2:0->22.1.1.1:0
bound_if=7 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/536 options[0218]=npu
FortiOS 6.4.2 Administration Guide 1373
Fortinet Inc.
VPN
create_dev frag-rfc accept_traffic=1
proxyid_num=1 child_num=0 refcnt=19 ilast=3 olast=3 ad=r/2
stat: rxp=1 txp=78 rxb=200 txb=5546
dpd: mode=on-idle on=1 idle=5000ms retry=3 count=0 seqno=1039
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=spoke1 proto=0 sa=1 ref=5 serial=1 auto-negotiate adr
src: 0:0.0.0.0/0.0.0.0:0
dst: 0:0.0.0.0/0.0.0.0:0
SA: ref=7 options=1a227 type=00 soft=0 mtu=1438 expire=1807/0B replaywin=1024
seqno=4e esn=0 replaywin_lastseq=00000002 itn=0
life: type=01 bytes=0/0 timeout=2370/2400
dec: spi=c53a8f60 esp=aes key=16 6b54e32d54d039196a74d96e96d1cf14
ah=sha1 key=20 e4903474614eafc96eda6400a3a5e88bbcb26a7f
enc: spi=6e36349d esp=aes key=16 914a40a7993eda75c4dea2f42905f27d
ah=sha1 key=20 8040eb08342edea2dae5eee058fd054a46688267
dec:pkts/bytes=1/132, enc:pkts/bytes=77/10456
npu_flag=03 npu_rgwy=22.1.1.1 npu_lgwy=15.1.1.2 npu_selid=1 dec_npuid=1 enc_npuid=1
----
name=spoke1_backup ver=1 serial=1 12.1.1.2:0->22.1.1.1:0
bound_if=6 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/536 options[0218]=npu
create_dev frag-rfc accept_traffic=0
proxyid_num=1 child_num=0 refcnt=11 ilast=20 olast=20 ad=/0
stat: rxp=0 txp=0 rxb=0 txb=0
dpd: mode=on-idle on=0 idle=5000ms retry=3 count=0 seqno=0
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=spoke1_backup proto=0 sa=0 ref=2 serial=1 auto-negotiate adr
src: 0:0.0.0.0/0.0.0.0:0
dst: 0:0.0.0.0/0.0.0.0:0
----
name=spoke1_0 ver=1 serial=a 15.1.1.2:4500->13.1.1.2:4500
bound_if=7 lgwy=static/1 tun=intf/0 mode=dial_inst/3 encap=none/728 options[02d8]=npu
create_dev no-sysctl rgwy-chg frag-rfc accept_traffic=1
parent=spoke1 index=0
proxyid_num=1 child_num=0 refcnt=20 ilast=2 olast=0 ad=r/2
stat: rxp=1 txp=7 rxb=112 txb=480
dpd: mode=on-idle on=1 idle=5000ms retry=3 count=0 seqno=0
natt: mode=keepalive draft=32 interval=10 remote_port=4500
proxyid=spoke1 proto=0 sa=1 ref=8 serial=1 auto-negotiate adr
src: 0:0.0.0.0/0.0.0.0:0
dst: 0:0.0.0.0/0.0.0.0:0
SA: ref=6 options=1a227 type=00 soft=0 mtu=1422 expire=2358/0B replaywin=1024
seqno=8 esn=0 replaywin_lastseq=00000002 itn=0
life: type=01 bytes=0/0 timeout=2367/2400
dec: spi=c53a8f61 esp=aes key=16 c66aa7ae9657068108ed47c048ff56b6
ah=sha1 key=20 60661c68e20bbc913c2564ade85e01ea3769e703
enc: spi=79cb0f30 esp=aes key=16 bf6c898c2e1c64baaa679ed5d79c3b58
ah=sha1 key=20 146ca78be6c34eedb9cd66cc328216e08682ecb1
dec:pkts/bytes=1/46, enc:pkts/bytes=7/992
npu_flag=03 npu_rgwy=13.1.1.2 npu_lgwy=15.1.1.2 npu_selid=6 dec_npuid=1 enc_npuid=1
e. Run the get router info routing-tale rip command. The system should return the following:
FortiOS 6.4.2 Administration Guide 1374
Fortinet Inc.
VPN
Routing table for VRF=0
R 172.16.101.0/24 [120/2] via 10.10.10.254, spoke1, 00:09:04
R 192.168.4.0/24 [120/2] via 10.10.10.3, spoke1_0, 00:00:02
UDP hole punching for spokes behind NAT
UDP hole punching allows ADVPN shortcuts to be established through a UDP hole on a NAT device. The NAT device
must support RFC 4787 Endpoint-Independent Mapping.
In the following example, device 10.1.100.11 behind Spoke1 needs to reach device 192.168.4.33 behind Spoke2.
Spoke1 and Spoke2 are behind NAT devices and have established IPsec tunnels to the Hub. The hole punching creates
a shortcut between Spoke1 and Spoke2 that bypasses the Hub.
To verify the ADVPN shortcut is established between both spokes behind NAT:
# diagnose debug enable
# diagnose debug application ike -1
ike 0: comes 22.1.1.1:4500->12.1.1.2:4500,ifindex=6....
ike 0: IKEv1 exchange=Informational id=3c10fb6a76f1e264/6c7b397100dffc63:58ac7c02 len=204
ike 0:toHub1:35: notify msg received: SHORTCUT-OFFER
ike 0:toHub1: shortcut-offer 10.1.100.11->192.168.4.33 psk 64 ppk 0 ver 1 mode 0
ike 0 looking up shortcut by addr 192.168.4.33, name toHub1
ike 0:toHub1: send shortcut-query 1438189781753480593 d3fdd1bfbc94caee/0000000000000000
12.1.1.2 10.1.100.11->192.168.4.33 psk 64 ttl 32 nat 1 ver 1 mode 0
ike 0:toHub1:35: sent IKE msg (SHORTCUT-QUERY): 12.1.1.2:4500->22.1.1.1:4500, len=236,
id=3c10fb6a76f1e264/6c7b397100dffc63:12e263f7
ike 0: comes 22.1.1.1:4500->12.1.1.2:4500,ifindex=6....
ike 0: IKEv1 exchange=Informational id=3c10fb6a76f1e264/6c7b397100dffc63:4976e1ac len=236
ike 0:toHub1:35: notify msg received: SHORTCUT-REPLY
ike 0:toHub1: recv shortcut-reply 1438189781753480593 d3fdd1bfbc94caee/16a1eb5b0f37ee23
14.1.1.3 to 10.1.100.11 psk 64 ppk 0 ver 1 mode 0 nat 55.1.1.2:64916
ike 0:toHub1: iif 22 192.168.4.33->10.1.100.11 route lookup oif 21
ike 0:toHub1: shortcut-reply received from 55.1.1.2:64916, local-nat=yes, peer-nat=yes
FortiOS 6.4.2 Administration Guide 1375
Fortinet Inc.
VPN
ike 0:toHub1: NAT hole punching to peer at 55.1.1.2:64916
ike 0:toHub1: created connection: 0x5e71f58 6 12.1.1.2->55.1.1.2:64916.
<==55.1.1.2:64916 this is UDP hole of NAT device
ike 0:toHub1: adding new dynamic tunnel for 55.1.1.2:64916
ike 0:toHub1_0: added new dynamic tunnel for 55.1.1.2:64916
ike 0:toHub1_0:48: initiator: main mode is sending 1st message...
ike 0:toHub1_0:48: cookie d3fdd1bfbc94caee/16a1eb5b0f37ee23
ike 0:toHub1_0:48: sent IKE msg (ident_i1send): 12.1.1.2:4500->55.1.1.2:64916, len=632,
id=d3fdd1bfbc94caee/16a1eb5b0f37ee23
ike 0: comes 55.1.1.2:64916->12.1.1.2:4500,ifindex=6....
ike 0: IKEv1 exchange=Identity Protection id=d3fdd1bfbc94caee/16a1eb5b0f37ee23 len=252
ike 0:toHub1_0:48: initiator: main mode get 1st response...
…
…
ike 0:toHub1_0:48: negotiation result
ike 0:toHub1_0:48: proposal id = 1:
ike 0:toHub1_0:48: protocol id = ISAKMP:
ike 0:toHub1_0:48: trans_id = KEY_IKE.
ike 0:toHub1_0:48: encapsulation = IKE/none
ike 0:toHub1_0:48: type=OAKLEY_ENCRYPT_ALG, val=AES_CBC, key-len=128
ike 0:toHub1_0:48: type=OAKLEY_HASH_ALG, val=SHA2_256.
ike 0:toHub1_0:48: type=AUTH_METHOD, val=PRESHARED_KEY.
ike 0:toHub1_0:48: type=OAKLEY_GROUP, val=MODP2048.
ike 0:toHub1_0:48: ISAKMP SA lifetime=86400
ike 0:toHub1_0:48: sent IKE msg (ident_i2send): 12.1.1.2:4500->55.1.1.2:64916, len=380,
id=d3fdd1bfbc94caee/16a1eb5b0f37ee23
ike 0: comes 55.1.1.2:64916->12.1.1.2:4500,ifindex=6....
ike 0: IKEv1 exchange=Identity Protection id=d3fdd1bfbc94caee/16a1eb5b0f37ee23 len=380
ike 0:toHub1_0:48: initiator: main mode get 2nd response...
…
…
ike 0:toHub1_0:48: add INITIAL-CONTACT
ike 0:toHub1_0:48: add INTERFACE-ADDR4 10.10.1.100
ike 0:toHub1_0:48: sent IKE msg (ident_i3send): 12.1.1.2:4500->55.1.1.2:64916, len=140,
id=d3fdd1bfbc94caee/16a1eb5b0f37ee23
ike 0: comes 55.1.1.2:64916->12.1.1.2:4500,ifindex=6....
ike 0: IKEv1 exchange=Identity Protection id=d3fdd1bfbc94caee/16a1eb5b0f37ee23 len=124
ike 0:toHub1_0:48: initiator: main mode get 3rd response...
ike 0:toHub1_0:48: received p1 notify type INTERFACE-ADDR4
ike 0:toHub1_0:48: INTERFACE-ADDR4 10.10.1.102
ike 0:toHub1_0:48: peer identifier IPV4_ADDR 14.1.1.3
ike 0:toHub1_0:48: PSK authentication succeeded
ike 0:toHub1_0:48: authentication OK
ike 0:toHub1_0:48: established IKE SA d3fdd1bfbc94caee/16a1eb5b0f37ee23
ike 0:toHub1_0:48: auto-discovery receiver
ike 0:toHub1_0:48: auto-discovery 2
ike 0:toHub1_0: add R/32 route 10.10.1.102 via 10.10.1.102, intf=toHub1(22)
ike 0:toHub1_0: add peer route 10.10.1.102
ike 0:toHub1: schedule auto-negotiate
ike 0:toHub1_0:48: no pending Quick-Mode negotiations
ike 0:toHub1_0:toHub1: IPsec SA connect 6 12.1.1.2->55.1.1.2:64916
ike 0:toHub1_0:toHub1: using existing connection
ike 0:toHub1_0:toHub1: traffic triggered, serial=1 1:10.1.100.11:2048->1:192.168.4.33:0
ike 0:toHub1:toHub1: config found
ike 0:toHub1_0:toHub1: IPsec SA connect 6 12.1.1.2->55.1.1.2:64916 negotiating
ike 0:toHub1_0:48: cookie d3fdd1bfbc94caee/16a1eb5b0f37ee23:8465e467
FortiOS 6.4.2 Administration Guide 1376
Fortinet Inc.
VPN
ike 0:toHub1_0:48:toHub1:109: natt flags 0x1f, encmode 1->3
ike 0:toHub1_0:48:toHub1:109: initiator selectors 0 0:0.0.0.0/0.0.0.0:0:0-
>0:0.0.0.0/0.0.0.0:0:0
ike 0:toHub1_0:48: sent IKE msg (quick_i1send): 12.1.1.2:4500->55.1.1.2:64916, len=620,
id=d3fdd1bfbc94caee/16a1eb5b0f37ee23:8465e467
ike 0: comes 55.1.1.2:64916->12.1.1.2:4500,ifindex=6....
ike 0: IKEv1 exchange=Quick id=d3fdd1bfbc94caee/16a1eb5b0f37ee23:8465e467 len=444
ike 0:toHub1_0:48:toHub1:109: responder selectors 0:0.0.0.0/0.0.0.0:0->0:0.0.0.0/0.0.0.0:0
ike 0:toHub1_0:48:toHub1:109: my proposal:
…
…
ike 0:toHub1_0:48:toHub1:109: add IPsec SA: SPIs=79654cf1/5e9936a5
ike 0:toHub1_0:48:toHub1:109: IPsec SA dec spi 79654cf1 key
16:5E21180992B8892DE5142E1F53ABD29E auth 20:49AA4AE14994A39A138392AC517B6E79D98CA673
ike 0:toHub1_0:48:toHub1:109: IPsec SA enc spi 5e9936a5 key
16:BE16B8EF4E75F7B3CF97A1D58D996890 auth 20:2F46B57CAC6F3185BB182F9280312263325F6BAF
ike 0:toHub1_0:48:toHub1:109: added IPsec SA: SPIs=79654cf1/5e9936a5
ike 0:toHub1_0:48:toHub1:109: sending SNMP tunnel UP trapp
To verify the spoke-to-spoke IPsec phase 1 tunnel shortcut is established:
# diagnose vpn ike gateway list
vd: root/0
name: toHub1
version: 1
interface: wan2 6
addr: 12.1.1.2:4500 -> 22.1.1.1:4500
created: 503s ago
assigned IPv4 address: 10.10.1.100/255.255.255.0
nat: me
auto-discovery: 2 receiver
IKE SA: created 1/1 established 1/1 time 0/0/0 ms
IPsec SA: created 1/3 established 1/3 time 0/0/0 ms
id/spi: 35 3c10fb6a76f1e264/6c7b397100dffc63
direction: initiator
status: established 503-503s ago = 0ms
proposal: aes128-sha256
key: 7fca86063ea2e72f-4efea6f1bec23948
lifetime/rekey: 86400/85596
DPD sent/recv: 00000000/00000000
vd: root/0
name: toHub1_0
version: 1
interface: wan2 6
addr: 12.1.1.2:4500 -> 55.1.1.2:64916
created: 208s ago
nat: me peer
auto-discovery: 2 receiver
IKE SA: created 1/1 established 1/1 time 20/20/20 ms
IPsec SA: created 1/1 established 1/1 time 10/10/10 ms
id/spi: 48 d3fdd1bfbc94caee/16a1eb5b0f37ee23
direction: initiator
status: established 208-208s ago = 20ms
FortiOS 6.4.2 Administration Guide 1377
Fortinet Inc.
VPN
proposal: aes128-sha256
key: 9bcac400d8e14e11-fffde33eaa3a8263
lifetime/rekey: 86400/85891
DPD sent/recv: 0000000a/00000000
Other VPN topics
The following topics provide instructions on configuring other VPN topics.
l VPN and ASIC offload on page 1378
l Encryption algorithms on page 1388
l Fragmenting IP packets before IPsec encapsulation on page 1395
l VXLAN over IPsec tunnel on page 1396
l Defining gateway IP addresses in IPsec with mode-config and DHCP on page 1399
l FQDN support for remote gateways on page 1401
VPN and ASIC offload
This topic provides a brief introduction to VPN traffic offloading.
IPsec traffic processed by NPU
1. Check the device ASIC information. For example, a FortiGate 900D has an NP6 and a CP8.
# get hardware status
Model name: [[QualityAssurance62/FortiGate]]-900D
ASIC version: CP8
ASIC SRAM: 64M
CPU: Intel(R) Xeon(R) CPU E3-1225 v3 @ 3.20GHz
Number of CPUs: 4
RAM: 16065 MB
Compact Flash: 1925 MB /dev/sda
Hard disk: 244198 MB /dev/sdb
USB Flash: not available
Network Card chipset: [[QualityAssurance62/FortiASIC]] NP6 Adapter (rev.)
2. Check port to NPU mapping.
# diagnose npu np6 port-list
Chip XAUI Ports Max Cross-chip
Speed offloading
----
np6_0 0
1. port17 1G Yes
1. port18 1G Yes
1. port19 1G Yes
1. port20 1G Yes
1. port21 1G Yes
1. port22 1G Yes
1. port23 1G Yes
1. port24 1G Yes
1. port27 1G Yes
1. port28 1G Yes
FortiOS 6.4.2 Administration Guide 1378
Fortinet Inc.
VPN
1. port25 1G Yes
1. port26 1G Yes
1. port31 1G Yes
1. port32 1G Yes
1. port29 1G Yes
1. port30 1G Yes
1. portB 10G Yes
1.
----
np6_1 0
1. port1 1G Yes
1. port2 1G Yes
1. port3 1G Yes
1. port4 1G Yes
1. port5 1G Yes
1. port6 1G Yes
1. port7 1G Yes
1. port8 1G Yes
1. port11 1G Yes
1. port12 1G Yes
1. port9 1G Yes
1. port10 1G Yes
1. port15 1G Yes
1. port16 1G Yes
1. port13 1G Yes
1. port14 1G Yes
1. portA 10G Yes
1.
----
3. Configure the option in IPsec phase1 settings to control NPU encrypt/decrypt IPsec packets (enabled by default).
config vpn ipsec phase1/phase1-interface
edit "vpn_name"
set npu-offload enable/disable
next
end
4. Check NPU offloading. The NPU encrypted/decrypted counter should tick. The npu_flag 03 flag means that the
traffic processed by the NPU is bi-directional.
# diagnose vpn tunnel list
list all ipsec tunnel in vd 0
----
name=test ver=2 serial=1 173.1.1.1:0->11.101.1.1:0
bound_if=42 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/8 options[0008]=npu
proxyid_num=1 child_num=0 refcnt=14 ilast=2 olast=2 ad=/0
stat: rxp=12231 txp=12617 rxb=1316052 txb=674314
dpd: mode=on-demand on=1 idle=20000ms retry=3 count=0 seqno=0
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=test proto=0 sa=1 ref=4 serial=7
src: 0:0.0.0.0/0.0.0.0:0
dst: 0:0.0.0.0/0.0.0.0:0
SA: ref=6 options=10626 type=00 soft=0 mtu=1438 expire=42921/0B replaywin=2048
seqno=802 esn=0 replaywin_lastseq=00000680 itn=0
life: type=01 bytes=0/0 timeout=42930/43200
dec: spi=e313ac46 esp=aes key=16 0dcb52642eed18b852b5c65a7dc62958
FortiOS 6.4.2 Administration Guide 1379
Fortinet Inc.
VPN
ah=md5 key=16 c61d9fe60242b9a30e60b1d01da77660
enc: spi=706ffe03 esp=aes key=16 6ad98c204fa70545dbf3d2e33fb7b529
ah=md5 key=16 dcc3b866da155ef73c0aba15ec530e2e
dec:pkts/bytes=1665/16352, enc:pkts/bytes=2051/16826
npu_flag=03 npu_rgwy=11.101.1.1 npu_lgwy=173.1.1.1 npu_selid=6 dec_npuid=2 enc_npuid=2
FGT_900D # diagnose vpn ipsec st
All ipsec crypto devices in use:
NP6_0:
Encryption (encrypted/decrypted)
null : 0 1.
des : 0 1.
3des : 0 1.
aes : 0 1.
aes-gcm : 0 1.
aria : 0 1.
seed : 0 1.
chacha20poly1305 : 0 1.
Integrity (generated/validated)
null : 0 1.
md5 : 0 1.
sha1 : 0 1.
sha256 : 0 1.
sha384 : 0 1.
sha512 : 0 1.
NP6_1:
Encryption (encrypted/decrypted)
null : 14976 15357
des : 0 1.
3des : 0 1.
aes : 1664 2047
aes-gcm : 0 1.
aria : 0 1.
seed : 0 1.
chacha20poly1305 : 0 1.
Integrity (generated/validated)
null : 0 1.
md5 : 1664 2047
sha1 : 14976 15357
sha256 : 0 1.
sha384 : 0 1.
sha512 : 0 1.
NPU Host Offloading:
Encryption (encrypted/decrypted)
null : 3 1.
des : 0 1.
3des : 0 1.
aes : 3 1.
aes-gcm : 0 1.
aria : 0 1.
seed : 0 1.
chacha20poly1305 : 0 1.
Integrity (generated/validated)
null : 0 1.
FortiOS 6.4.2 Administration Guide 1380
Fortinet Inc.
VPN
md5 : 3 1.
sha1 : 3 1.
sha256 : 0 1.
sha384 : 0 1.
sha512 : 0 1.
CP8:
Encryption (encrypted/decrypted)
null : 1 1.
des : 0 1.
3des : 0 1.
aes : 1 1.
aes-gcm : 0 1.
aria : 0 1.
seed : 0 1.
chacha20poly1305 : 0 1.
Integrity (generated/validated)
null : 0 1.
md5 : 1 1.
sha1 : 1 1.
sha256 : 0 1.
sha384 : 0 1.
sha512 : 0 1.
SOFTWARE:
Encryption (encrypted/decrypted)
null : 0 1.
des : 0 1.
3des : 0 1.
aes : 0 1.
aes-gcm : 29882 29882
aria : 21688 21688
seed : 153774 153774
chacha20poly1305 : 29521 29521
Integrity (generated/validated)
null : 59403 59403
md5 : 0 1.
sha1 : 175462 175462
sha256 : 0 1.
sha384 : 0 1.
sha512 : 0 1.
5. If traffic cannot be offloaded by the NPU, the CP will try to encrypt/decrypt the IPsec packets.
IPsec traffic processed by CP
1. Check the NPU flag and CP counter.
# diagnose vpn tunnel list
list all ipsec tunnel in vd 0
----
name=test ver=2 serial=1 173.1.1.1:0->11.101.1.1:0
bound_if=42 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/0
proxyid_num=1 child_num=0 refcnt=13 ilast=0 olast=0 ad=/0
stat: rxp=8418 txp=8418 rxb=1251248 txb=685896
dpd: mode=on-demand on=1 idle=20000ms retry=3 count=0 seqno=0
natt: mode=none draft=0 interval=0 remote_port=0
FortiOS 6.4.2 Administration Guide 1381
Fortinet Inc.
VPN
proxyid=test proto=0 sa=1 ref=3 serial=7
src: 0:0.0.0.0/0.0.0.0:0
dst: 0:0.0.0.0/0.0.0.0:0
SA: ref=3 options=10226 type=00 soft=0 mtu=1438 expire=42037/0B replaywin=2048
seqno=20e3 esn=0 replaywin_lastseq=000020e3 itn=0
life: type=01 bytes=0/0 timeout=42928/43200
dec: spi=e313ac48 esp=aes key=16 393770842f926266530db6e43e21c4f8
ah=md5 key=16 b2e4e025e8910e95c1745e7855479cca
enc: spi=706ffe05 esp=aes key=16 7ef749610335f9f50e252023926de29e
ah=md5 key=16 0b81e4d835919ab2b8ba8edbd01aec9d
dec:pkts/bytes=8418/685896, enc:pkts/bytes=8418/1251248
npu_flag=00 npu_rgwy=11.101.1.1 npu_lgwy=173.1.1.1 npu_selid=6 dec_npuid=0 enc_npuid=0
FGT-D # diagnose vpn ipsec status
All ipsec crypto devices in use:
NP6_0:
Encryption (encrypted/decrypted)
null : 0 1.
des : 0 1.
3des : 0 1.
aes : 0 1.
aes-gcm : 0 1.
aria : 0 1.
seed : 0 1.
chacha20poly1305 : 0 1.
Integrity (generated/validated)
null : 0 1.
md5 : 0 1.
sha1 : 0 1.
sha256 : 0 1.
sha384 : 0 1.
sha512 : 0 1.
NP6_1:
Encryption (encrypted/decrypted)
null : 14976 15357
des : 0 1.
3des : 0 1.
aes : 1664 2047
aes-gcm : 0 1.
aria : 0 1.
seed : 0 1.
chacha20poly1305 : 0 1.
Integrity (generated/validated)
null : 0 1.
md5 : 1664 2047
sha1 : 14976 15357
sha256 : 0 1.
sha384 : 0 1.
sha512 : 0 1.
NPU Host Offloading:
Encryption (encrypted/decrypted)
null : 3 1.
des : 0 1.
3des : 0 1.
FortiOS 6.4.2 Administration Guide 1382
Fortinet Inc.
VPN
aes : 3 1.
aes-gcm : 0 1.
aria : 0 1.
seed : 0 1.
chacha20poly1305 : 0 1.
Integrity (generated/validated)
null : 0 1.
md5 : 3 1.
sha1 : 3 1.
sha256 : 0 1.
sha384 : 0 1.
sha512 : 0 1.
CP8:
Encryption (encrypted/decrypted)
null : 1 1.
des : 0 1.
3des : 0 1.
aes : 8499 8499
aes-gcm : 0 1.
aria : 0 1.
seed : 0 1.
chacha20poly1305 : 0 1.
Integrity (generated/validated)
null : 0 1.
md5 : 8499 8499
sha1 : 1 1.
sha256 : 0 1.
sha384 : 0 1.
sha512 : 0 1.
SOFTWARE:
Encryption (encrypted/decrypted)
null : 0 1.
des : 0 1.
3des : 0 1.
aes : 0 1.
aes-gcm : 29882 29882
aria : 21688 21688
seed : 153774 153774
chacha20poly1305 : 29521 29521
Integrity (generated/validated)
null : 59403 59403
md5 : 0 1.
sha1 : 175462 175462
sha256 : 0 1.
sha384 : 0 1.
sha512 : 0 1.
2. Two options are used to control if the CP processes packets. If disabled, packets are processed by the CPU.
config system global
set ipsec-asic-offload disable
set ipsec-hmac-offload disable
end
FortiOS 6.4.2 Administration Guide 1383
Fortinet Inc.
VPN
IPsec traffic processed by CPU
IPsec traffic might be processed by the CPU for the following reasons:
l Some low end models do not have NPUs.
l NPU offloading and CP IPsec traffic processing manually disabled.
l Some types of proposals - SEED, ARIA, chacha20poly1305 - are not supported by the NPU or CP.
l NPU flag set to 00 and software encrypt/decrypt counter ticked.
# diagnose vpn tunnel list
list all ipsec tunnel in vd 0
----
name=test ver=2 serial=1 173.1.1.1:0->11.101.1.1:0
bound_if=42 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/0
proxyid_num=1 child_num=0 refcnt=14 ilast=0 olast=0 ad=/0
stat: rxp=12162 txp=12162 rxb=1691412 txb=1008216
dpd: mode=on-demand on=1 idle=20000ms retry=3 count=0 seqno=0
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=test proto=0 sa=1 ref=4 serial=8
src: 0:0.0.0.0/0.0.0.0:0
dst: 0:0.0.0.0/0.0.0.0:0
SA: ref=3 options=10602 type=00 soft=0 mtu=1453 expire=42903/0B replaywin=2048
seqno=2d70 esn=0 replaywin_lastseq=00002d70 itn=0
life: type=01 bytes=0/0 timeout=42931/43200
dec: spi=e313ac4d esp=chacha20poly1305 key=36
812d1178784c1130d1586606e44e1b9ab157e31a09edbed583be1e9cc82e8c9f2655a2cf
ah=null key=0
enc: spi=706ffe0a esp=chacha20poly1305 key=36
f2727e001e2243549b140f1614ae3df82243adb070e60c33911f461b389b05a7a642e11a
ah=null key=0
dec:pkts/bytes=11631/976356, enc:pkts/bytes=11631/1627692
npu_flag=00 npu_rgwy=11.101.1.1 npu_lgwy=173.1.1.1 npu_selid=7 dec_npuid=0 enc_npuid=0
FGT_900D # diagnose vpn ipsec status
All ipsec crypto devices in use:
NP6_0:
Encryption (encrypted/decrypted)
null : 0 1.
des : 0 1.
3des : 0 1.
aes : 0 1.
aes-gcm : 0 1.
aria : 0 1.
seed : 0 1.
chacha20poly1305 : 0 1.
Integrity (generated/validated)
null : 0 1.
md5 : 0 1.
sha1 : 0 1.
sha256 : 0 1.
sha384 : 0 1.
sha512 : 0 1.
NP6_1:
Encryption (encrypted/decrypted)
null : 14976 15357
FortiOS 6.4.2 Administration Guide 1384
Fortinet Inc.
VPN
des : 0 1.
3des : 0 1.
aes : 1664 2047
aes-gcm : 0 1.
aria : 0 1.
seed : 0 1.
chacha20poly1305 : 0 1.
Integrity (generated/validated)
null : 0 1.
md5 : 1664 2047
sha1 : 14976 15357
sha256 : 0 1.
sha384 : 0 1.
sha512 : 0 1.
NPU Host Offloading:
Encryption (encrypted/decrypted)
null : 3 1.
des : 0 1.
3des : 0 1.
aes : 3 1.
aes-gcm : 0 1.
aria : 0 1.
seed : 0 1.
chacha20poly1305 : 0 1.
Integrity (generated/validated)
null : 0 1.
md5 : 3 1.
sha1 : 3 1.
sha256 : 0 1.
sha384 : 0 1.
sha512 : 0 1.
CP8:
Encryption (encrypted/decrypted)
null : 1 1.
des : 0 1.
3des : 0 1.
aes : 8865 8865
aes-gcm : 0 1.
aria : 0 1.
seed : 0 1.
chacha20poly1305 : 0 1.
Integrity (generated/validated)
null : 0 1.
md5 : 8865 8865
sha1 : 1 1.
sha256 : 0 1.
sha384 : 0 1.
sha512 : 0 1.
SOFTWARE:
Encryption (encrypted/decrypted)
null : 0 1.
des : 0 1.
3des : 0 1.
FortiOS 6.4.2 Administration Guide 1385
Fortinet Inc.
VPN
aes : 531 531
aes-gcm : 29882 29882
aria : 21688 21688
seed : 153774 153774
chacha20poly1305 : 41156 41156
Integrity (generated/validated)
null : 71038 71038
md5 : 531 531
sha1 : 175462 175462
sha256 : 0 1.
sha384 : 0 1.
sha512 : 0 1.
Disable automatic ASIC offloading
When auto-asic-offload is set to disable in the firewall policy, traffic is not offloaded and the NPU hosting counter
is ticked.
# diagnose vpn ipsec status
All ipsec crypto devices in use:
NP6_0:
Encryption (encrypted/decrypted)
null : 0 1.
des : 0 1.
3des : 0 1.
aes : 0 1.
aes-gcm : 0 1.
aria : 0 1.
seed : 0 1.
chacha20poly1305 : 0 1.
Integrity (generated/validated)
null : 0 1.
md5 : 0 1.
sha1 : 0 1.
sha256 : 0 1.
sha384 : 0 1.
sha512 : 0 1.
NP6_1:
Encryption (encrypted/decrypted)
null : 14976 15357
des : 0 1.
3des : 0 1.
aes : 110080 2175
aes-gcm : 0 1.
aria : 0 1.
seed : 0 1.
chacha20poly1305 : 0 1.
Integrity (generated/validated)
null : 0 1.
md5 : 110080 2175
sha1 : 14976 15357
sha256 : 0 1.
sha384 : 0 1.
sha512 : 0 1.
FortiOS 6.4.2 Administration Guide 1386
Fortinet Inc.
VPN
NPU Host Offloading:
Encryption (encrypted/decrypted)
null : 3 1.
des : 0 1.
3des : 0 1.
aes : 111090 1.
aes-gcm : 0 1.
aria : 0 1.
seed : 0 1.
chacha20poly1305 : 0 1.
Integrity (generated/validated)
null : 0 1.
md5 : 111090 1.
sha1 : 3 1.
sha256 : 0 1.
sha384 : 0 1.
sha512 : 0 1.
CP8:
Encryption (encrypted/decrypted)
null : 1 1.
des : 0 1.
3des : 0 1.
aes : 8865 8865
aes-gcm : 0 1.
aria : 0 1.
seed : 0 1.
chacha20poly1305 : 0 1.
Integrity (generated/validated)
null : 0 1.
md5 : 8865 8865
sha1 : 1 1.
sha256 : 0 1.
sha384 : 0 1.
sha512 : 0 1.
SOFTWARE:
Encryption (encrypted/decrypted)
null : 0 1.
des : 0 1.
3des : 0 1.
aes : 539 539
aes-gcm : 29882 29882
aria : 21688 21688
seed : 153774 153774
chacha20poly1305 : 41259 41259
Integrity (generated/validated)
null : 71141 71141
md5 : 539 539
sha1 : 175462 175462
sha256 : 0 1.
sha384 : 0 1.
sha512 : 0 1.
FortiOS 6.4.2 Administration Guide 1387
Fortinet Inc.
VPN
Encryption algorithms
This topic provides a brief introduction to IPsec phase 1 and phase 2 encryption algorithms and includes the following
sections:
l IKEv1 phase 1 encryption algorithm
l IKEv1 phase 2 encryption algorithm
l IKEv2 phase 1 encryption algorithm
l IKEv2 phase 2 encryption algorithm
l HMAC settings
IKEv1 phase 1 encryption algorithm
The default encryption algorithm is:
aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
DES is a symmetric-key algorithm, which means the same key is used for encrypting and decrypting data. FortiOS
supports:
l des-md5
l des-sha1
l des-sha256
l des-sha384
l des-sha512
3DES applies the DES algorithm three times to each data. FortiOS supports:
l 3des-md5
l 3des-sha1
l 3des-sha256
l 3des-sha384
l 3des-sha512
AES is a symmetric-key algorithm with different key lengths (128, 192, and 256 bits). FortiOS supports:
l aes128-md5
l aes128-sha1
l aes128-sha256
l aes128-sha384
l aes128-sha512
l aes192-md5
l aes192-sha1
l aes192-sha256
l aes192-sha384
l aes192-sha512
l aes256-md5
l aes256-sha1
l aes256-sha256
l aes256-sha384
l aes256-sha512
FortiOS 6.4.2 Administration Guide 1388
Fortinet Inc.
VPN
The ARIA algorithm is based on AES with different key lengths (128, 192, and 256 bits). FortiOS supports:
l aria128-md5
l aria128-sha1
l aria128-sha256
l aria128-sha384
l aria128-sha512
l aria192-md5
l aria192-sha1
l aria192-sha256
l aria192-sha384
l aria192-sha512
l aria256-md5
l aria256-sha1
l aria256-sha256
l aria256-sha384
l aria256-sha512
SEED is a symmetric-key algorithm. FortiOS supports:
l seed128-md5
l seed128-sha1
l seed128-sha256
l seed128-sha384
l seed128-sha512
Suite-B is a set of AES encryption with ICV in GCM mode. FortiOS supports Suite-B on new kernel platforms only. IPsec
traffic cannot offload to NPU. CP9 supports Suite-B offloading, otherwise packets are encrypted and decrypted by
software. FortiOS supports:
l suite-b-gcm-128
l suite-b-gcm-256
IKEv1 phase 2 encryption algorithm
The default encryption algorithm is:
aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm aes256gcm chacha20poly1305
With null encryption, IPsec traffic can offload NPU/CP. FortiOS supports:
l null-md5
l null-sha1
l null-sha256
l null-sha384
l null-sha512
With the DES encryption algorithm, IPsec traffic can offload NPU/CP. FortiOS supports:
l des-null
l des-md5
l des-sha1
l des-sha256
FortiOS 6.4.2 Administration Guide 1389
Fortinet Inc.
VPN
l des-sha384
l des-sha512
With the 3DES encryption algorithm, IPsec traffic can offload NPU/CP. FortiOS supports:
l 3des-null
l 3des-md5
l 3des-sha1
l 3des-sha256
l 3des-sha384
l 3des-sha512
With the AES encryption algorithm, IPsec traffic can offload NPU/CP. FortiOS supports:
l aes128-null
l aes128-md5
l aes128-sha1
l aes128-sha256
l aes128-sha384
l aes128-sha512
l aes192-null
l aes192-md5
l aes192-sha1
l aes192-sha256
l aes192-sha384
l aes192-sha512
l aes256-null
l aes256-md5
l aes256-sha1
l aes256-sha256
l aes256-sha384
l aes256-sha512
With the AESGCM encryption algorithm, IPsec traffic cannot offload NPU/CP. FortiOS supports:
l aes128gcm
l aes256gcm
With the chacha20poly1305 encryption algorithm, IPsec traffic cannot offload NPU/CP. FortiOS supports:
l chacha20poly1305
With the ARIA encryption algorithm, IPsec traffic cannot offload NPU/CP. FortiOS supports:
l aria128-null
l aria128-md5
l aria128-sha1
l aria128-sha256
l aria128-sha384
l aria128-sha512
l aria192-null
l aria192-md5
FortiOS 6.4.2 Administration Guide 1390
Fortinet Inc.
VPN
l aria192-sha1
l aria192-sha256
l aria192-sha384
l aria192-sha512
l aria256-null
l aria256-md5
l aria256-sha1
l aria256-sha256
l aria256-sha384
l aria256-sha512
With the SEED encryption algorithm, IPsec traffic cannot offload NPU/CP. FortiOS supports:
l seed-null
l seed-md5
l seed-sha1
l seed-sha256
l seed-sha384
l seed-sha512
IKEv2 phase 1 encryption algorithm
The default encryption algorithm is:
aes128-sha256 aes256-sha256 aes128gcm-prfsha256 aes256gcm-prfsha384 chacha20poly1305-
prfsha256
DES is a symmetric-key algorithm, which means the same key is used for encrypting and decrypting data. FortiOS
supports:
l des-md5
l des-sha1
l des-sha256
l des-sha384
l des-sha512
3DES applies the DES algorithm three times to each data. FortiOS supports:
l 3des-md5
l 3des-sha1
l 3des-sha256
l 3des-sha384
l 3des-sha512
AES is a symmetric-key algorithm with different key lengths (128, 192, and 256 bits). FortiOS supports:
l aes128-md5
l aes128-sha1
l aes128-sha256
l aes128-sha384
l aes128-sha512
l aes128gcm-prfsha1
FortiOS 6.4.2 Administration Guide 1391
Fortinet Inc.
VPN
l aes128gcm-prfsha256
l aes128gcm-prfsha384
l aes128gcm-prfsha512
l aes192-md5
l aes192-sha1
l aes192-sha256
l aes192-sha384
l aes192-sha512
l aes256-md5
l aes256-sha1
l aes256-sha256
l aes256-sha384
l aes256-sha512
l aes256gcm-prfsha1
l aes256gcm-prfsha256
l aes256gcm-prfsha384
l aes256gcm-prfsha512
The ARIA algorithm is based on AES with different key lengths (128, 192, and 256 bits). FortiOS supports:
l aria128-md5
l aria128-sha1
l aria128-sha256
l aria128-sha384
l aria128-sha512
l aria192-md5
l aria192-sha1
l aria192-sha256
l aria192-sha384
l aria192-sha512
l aria256-md5
l aria256-sha1
l aria256-sha256
l aria256-sha384
l aria256-sha512
With the chacha20poly1305 encryption algorithm, FortiOS supports:
l chacha20poly1305-prfsha1
l chacha20poly1305-prfsha256
l chacha20poly1305-prfsha384
l chacha20poly1305-prfsha512
SEED is a symmetric-key algorithm. FortiOS supports:
l seed128-md5
l seed128-sha1
l seed128-sha256
FortiOS 6.4.2 Administration Guide 1392
Fortinet Inc.
VPN
l seed128-sha384
l seed128-sha512
Suite-B is a set of AES encryption with ICV in GCM mode. FortiOS supports Suite-B on new kernel platforms only. IPsec
traffic cannot offload to NPU. CP9 supports Suite-B offloading, otherwise packets are encrypted and decrypted by
software. FortiOS supports:
l suite-b-gcm-128
l suite-b-gcm-256
IKEv2 phase 2 encryption algorithm
The default encryption algorithm is:
aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm aes256gcm chacha20poly1305
With null encryption, IPsec traffic can offload NPU/CP. FortiOS supports:
l null-md5
l null-sha1
l null-sha256
l null-sha384
l null-sha512
With the DES encryption algorithm, IPsec traffic can offload NPU/CP. FortiOS supports:
l des-null
l des-md5
l des-sha1
l des-sha256
l des-sha384
l des-sha512
With the 3DES encryption algorithm, IPsec traffic can offload NPU/CP. FortiOS supports:
l 3des-null
l 3des-md5
l 3des-sha1
l 3des-sha256
l 3des-sha384
l 3des-sha512
With the AES encryption algorithm, IPsec traffic can offload NPU/CP. FortiOS supports:
l aes128-null
l aes128-md5
l aes128-sha1
l aes128-sha256
l aes128-sha384
l aes128-sha512
l aes192-null
l aes192-md5
l aes192-sha1
l aes192-sha256
FortiOS 6.4.2 Administration Guide 1393
Fortinet Inc.
VPN
l aes192-sha384
l aes192-sha512
l aes256-null
l aes256-md5
l aes256-sha1
l aes256-sha256
l aes256-sha384
l aes256-sha512
With the AESGCM encryption algorithm, IPsec traffic cannot offload NPU. CP9 supports AESGCM offloading. FortiOS
supports:
l aes128gcm
l aes256gcm
With the chacha20poly1305 encryption algorithm, IPsec traffic cannot offload NPU/CP. FortiOS supports:
l chacha20poly1305
With the ARIA encryption algorithm, IPsec traffic cannot offload NPU/CP. FortiOS supports:
l aria128-null
l aria128-md5
l aria128-sha1
l aria128-sha256
l aria128-sha384
l aria128-sha512
l aria192-null
l aria192-md5
l aria192-sha1
l aria192-sha256
l aria192-sha384
l aria192-sha512
l aria256-null
l aria256-md5
l aria256-sha1
l aria256-sha256
l aria256-sha384
l aria256-sha512
With the SEED encryption algorithm, IPsec traffic cannot offload NPU/CP. FortiOS supports:
l seed-null
l seed-md5
l seed-sha1
l seed-sha256
l seed-sha384
l seed-sha512
FortiOS 6.4.2 Administration Guide 1394
Fortinet Inc.
VPN
HMAC settings
The FortiGate uses the HMAC based on the authentication proposal that is chosen in phase 1 or phase 2 of the IPsec
configuration. Each proposal consists of the encryption-hash pair (such as 3des-sha256). The FortiGate matches the
most secure proposal to negotiate with the peer.
To view the chosen proposal and the HMAC hash used:
# diagnose vpn ike gateway list
vd: root/0
name: MPLS
version: 1
interface: port1 3
addr: 192.168.2.5:500 -> 10.10.10.1:500
virtual-interface-addr: 172.31.0.2 -> 172.31.0.1
created: 1015820s ago
IKE SA: created 1/13 established 1/13 time 10/1626/21010 ms
IPsec SA: created 1/24 established 1/24 time 0/11/30 ms
id/spi: 124 43b087dae99f7733/6a8473e58cd8990a
direction: responder
status: established 68693-68693s ago = 10ms
proposal: 3des-sha256
key: e0fa6ab8dc509b33-aa2cc549999b1823-c3cb9c337432646e
lifetime/rekey: 86400/17436
DPD sent/recv: 000001e1/00000000
Fragmenting IP packets before IPsec encapsulation
The ip-fragmentation command controls packet fragmentation before IPsec encapsulation, which can benefit
packet loss in some environments.
The following options are available for the ip-fragmentation variable.
Option Description
pre-encapsulation Fragment before IPsec encapsulation.
post-encapsulation (default value) Fragment after IPsec encapsulation (RFC compliant).
To configure packet fragmentation using the CLI:
config vpn ipsec phase1-interface
edit "demo"
set interface "port1"
set authmethod signature
set peertype any
set net-device enable
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
set ip-fragmentation pre-encapsulation
set remote-gw 172.16.200.4
set certificate "Fortinet_Factory"
next
end
FortiOS 6.4.2 Administration Guide 1395
Fortinet Inc.
VPN
VXLAN over IPsec tunnel
This is an example of VXLAN over IPsec tunnel. VXLAN encapsulation is used in the phase1-interface setting and
virtual-switch is used to bridge the internal with VXLAN over IPsec tunnel.
For more information, see Remote access on page 1244.
Sample topology
Sample configuration
To configure VXLAN over an IPsec tunnel:
1. Configure the WAN interface and default route:
a. HQ1:
config system interface
edit "port1"
set ip 172.16.200.1 255.255.255.0
next
end
config router static
edit 1
set gateway 172.16.200.3
set device "port1"
next
end
b. HQ2:
config system interface
edit "port25"
set ip 172.16.202.1 255.255.255.0
next
end
config router static
edit 1
set gateway 172.16.202.2
set device "port25"
next
end
FortiOS 6.4.2 Administration Guide 1396
Fortinet Inc.
VPN
2. Configure IPsec phase1-interface:
a. HQ1:
config vpn ipsec phase1-interface
edit "to_HQ2"
set interface "port1"
set peertype any
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
set encapsulation VXLAN
set encapsulation-address ipv4
set encap-local-gw4 172.16.200.1
set encap-remote-gw4 172.16.202.1
set remote-gw 172.16.202.1
set psksecret sample
next
end
config vpn ipsec phase2-interface
edit "to_HQ2"
set phase1name "to_HQ2"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm
aes256gcm chacha20poly1305
next
end
b. HQ2:
config vpn ipsec phase1-interface
edit "to_HQ1"
set interface "port25"
set peertype any
set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
set encapsulation VXLAN
set encapsulation-address ipv4
set encap-local-gw4 172.16.202.1
set encap-remote-gw4 172.16.200.1
set remote-gw 172.16.200.1
set psksecret sample
next
end
config vpn ipsec phase2-interface
edit "to_HQ1"
set phase1name "to_HQ1"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm
aes256gcm chacha20poly1305
next
end
3. Configure the virtual switch.
a. HQ1
config system switch-interface
edit "VXLAN-HQ2"
set member "dmz" "to_HQ2"
set intra-switch-policy explicit
next
end
FortiOS 6.4.2 Administration Guide 1397
Fortinet Inc.
VPN
b. HQ2
config system switch-interface
edit "VXLAN-HQ1"
set member "port9" "to_HQ1"
set intra-switch-policy explicit
next
end
4. Configure the firewall policy:
a. HQ1:
config firewall policy
edit 1
set srcintf "dmz"
set dstintf "to_HQ2"
set srcaddr "10.1.100.0"
set dstaddr "10.1.100.0"
set action accept
set schedule "always"
set service "ALL"
next
edit 2
set srcintf "to_HQ2"
set dstintf "dmz"
set srcaddr "10.1.100.0"
set dstaddr "10.1.100.0"
set action accept
set schedule "always"
set service "ALL"
next
end
b. HQ2:
config firewall policy
edit 1
set srcintf "port9"
set dstintf "to_HQ1"
set srcaddr "10.1.100.0"
set dstaddr "10.1.100.0"
set action accept
set schedule "always"
set service "ALL"
next
edit 2
set srcintf "to_HQ1"
set dstintf "port9"
set srcaddr "10.1.100.0"
set dstaddr "10.1.100.0"
set action accept
set schedule "always"
set service "ALL"
next
end
FortiOS 6.4.2 Administration Guide 1398
Fortinet Inc.
VPN
5. Optionally, view the VPN tunnel list on HQ1 with the diagnose vpn tunnel list command:
list all ipsec tunnel in vd 0
----
name=to_HQ2 ver=1 serial=2 172.16.200.1:0->172.16.202.1:0
bound_if=5 lgwy=static/1 tun=intf/0 mode=auto/1 encap=VXLAN/2 options[0002]=
encap-addr: 172.16.200.1->172.16.202.1
proxyid_num=1 child_num=0 refcnt=11 ilast=8 olast=0 ad=/0
stat: rxp=13 txp=3693 rxb=5512 txb=224900
dpd: mode=on-demand on=1 idle=20000ms retry=3 count=0 seqno=45
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=to_HQ2 proto=0 sa=1 ref=2 serial=1
src: 0:0.0.0.0/0.0.0.0:0
dst: 0:0.0.0.0/0.0.0.0:0
SA: ref=3 options=10226 type=00 soft=0 mtu=1390 expire=41944/0B replaywin=2048
seqno=e6e esn=0 replaywin_lastseq=0000000e itn=0
life: type=01 bytes=0/0 timeout=42901/43200
dec: spi=635e9bb1 esp=aes key=16 c8a374905ef9156e66504195f46a650c
ah=sha1 key=20 a09265de7d3b0620b45441fb5af44dab125f2afe
enc: spi=a4d0cd1e esp=aes key=16 e9d0f3f0bb7e15a833f80c42615a3b91
ah=sha1 key=20 609a315c385471b8909b771c76e4fa7214996e50
dec:pkts/bytes=13/4640, enc:pkts/bytes=3693/623240
6. Optionally, view the bridge control interface on HQ1 with the diagnose netlink brctl name host VXLAN-
HQ1 command:
show bridge control interface VXLAN-HQ1 host.
fdb: size=2048, used=17, num=17, depth=1
Bridge VXLAN-a host table
port no device devname mac addr ttl attributes
1 1. dmz 00:0c:29:4e:33:c9 1. Hit(1)
1 1. dmz 00:0c:29:a8:c3:ea 105 Hit(105)
1 1. dmz 90:6c:ac:53:76:29 18 Hit(18)
1 1. dmz 08:5b:0e:dd:69:cb 1. Local Static
1 1. dmz 90:6c:ac:84:3e:5d 1. Hit(5)
1 1. dmz 00:0b:fd:eb:21:d6 1. Hit(0)
2 38 to_HQ2 56:45:c3:3f:57:b4 1. Local Static
1 1. dmz 00:0c:29:d2:66:40 78 Hit(78)
2 38 to_HQ2 90:6c:ac:5b:a6:eb 124 Hit(124)
1 1. dmz 00:0c:29:a6:bc:e6 19 Hit(19)
1 1. dmz 00:0c:29:f0:a2:e7 1. Hit(0)
1 1. dmz 00:0c:29:d6:c4:66 164 Hit(164)
1 1. dmz 00:0c:29:e7:68:19 1. Hit(0)
1 1. dmz 00:0c:29:bf:79:30 19 Hit(19)
1 1. dmz 00:0c:29:e0:64:7d 1. Hit(0)
1 1. dmz 36:ea:c7:30:c0:f1 25 Hit(25)
1 1. dmz 36:ea:c7:30:cc:71 1. Hit(0)
Defining gateway IP addresses in IPsec with mode-config and DHCP
For an IPsec tunnel, the gateway IP address (giaddr) can be defined on a DHCP relay agent. Both IPv4 and IPv6
addresses are supported. An IPsec tunnel with mode-config and DHCP relay cannot specify a DHCP subnet range to
the DHCP server.
The DHCP server assigns an IP address based on the giaddr set on the IPSec phase1 interface and sends an offer to
this subnet. The DHCP server must have a route to the specified subnet giaddr.
FortiOS 6.4.2 Administration Guide 1399
Fortinet Inc.
VPN
Example
To define the gateway IP address on the DHCP relay server:
1. Configure the VPN IPsec phase1 interface:
config vpn ipsec phase1-interface
edit "ipv4"
set type dynamic
set interface "port2"
set peertype any
set net-device disable
set mode-cfg enable
set proposal des-md5 des-sha1
set dpd on-idle
set dhgrp 5
set assign-ip-from dhcp
set dhcp-ra-giaddr 11.11.11.1
set psksecret ***********
set dpd-retryinterval 60
next
end
IPv6 could also be configured:
config vpn ipsec phase1-interface
edit "ipv6"
set type dynamic
set interface "port2"
set peertype any
set net-device disable
set mode-cfg enable
set proposal des-md5 des-sha1
set dpd on-idle
FortiOS 6.4.2 Administration Guide 1400
Fortinet Inc.
VPN
set dhgrp 5
set assign-ip-from dhcp
set dhcp6-ra-linkaddr 2000:11:11:11::1
set psksecret **********
set dpd-retryinterval 60
next
end
2. Enable DHCP proxy and configure the DHCP server IP address:
config system settings
set dhcp-proxy enable
set dhcp-server-ip "10.1.1.1"
end
3. Repeat the above steps for FGT_C and subnet B.
FQDN support for remote gateways
FortiGate supports FQDN when defining an IPsec remote gateway with a dynamically assigned IPv6 address. When
FortiGate attempts to connect to the IPv6 device, FQDN will resolve the IPv6 address even when the address changes.
Using FQDN to configure the remote gateway is useful when the remote end has a dynamic IPv6 address assigned by
their ISP or DHCPv6 server.
To set the VPN to DDNS and configure FQDN:
config vpn ipsec phase1-interface
edit "ddns6"
set type ddns
set interface "agg1"
set ip-version 6
set ike-version 2
set peertype any
set net-device disable
set proposal aes128-sha256 aes256-sha256 aes128gcm-prfsha256 aes256gcm-prfsha384
chacha20poly1305-prfsha256
set dpd on-idle
set remotegw-ddns "rgwa61.vpnlab.org"
set psksecret **********
next
end
config vpn ipsec phase2-interface
edit "ddns6"
set phase1name "ddns6"
set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm aes256gcm
chacha20poly1305
set src-addr-type subnet6
set dst-addr-type subnet6
set src-subnet6 2003:1:1:1::/64
next
end
FortiOS 6.4.2 Administration Guide 1401
Fortinet Inc.
VPN
FQDN resolves the IPv6 address
# diagnose test application dnsproxy 7
vfid=0, name=rgwa61.vpnlab.org, ttl=3600:3547:1747
2003:33:1:1::22 (ttl=3600)
FortiGate uses FQDN to connect to the IPv6 device
# diagnose vpn tunnel list name ddns6
list ipsec tunnel by names in vd 0
------------------------------------------------------
name=ddns6 ver=2 serial=2 2003:33:1:1::1:0->2003:33:1:1::22:0 dst_mtu=1500
bound_if=32 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/520 options[0208]=npu frag-rfc
run_state=0 accept_traffic=1 overlay_id=0
proxyid_num=1 child_num=0 refcnt=10 ilast=9 olast=9 ad=/0
stat: rxp=0 txp=0 rxb=0 txb=0
dpd: mode=on-idle on=1 idle=20000ms retry=3 count=0 seqno=72340
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=ddns6 proto=0 sa=1 ref=2 serial=1
src: 0:2003:1:1:1::/64:0
dst: 0:::/0:0
SA: ref=3 options=10226 type=00 soft=0 mtu=1422 expire=42680/0B replaywin=2048
seqno=1 esn=0 replaywin_lastseq=00000000 itn=0 qat=0 hash_search_len=1
life: type=01 bytes=0/0 timeout=42901/43200
dec: spi=ac7a5718 esp=aes key=16 9976b66280cc49f500d8edca093e03fb
ah=sha1 key=20 4d94d76fc18df5a180c52e0a6cd5f430fde48fe8
enc: spi=7ab888ec esp=aes key=16 841a95d3ee5ea5108a2ba269b74998d1
ah=sha1 key=20 ed0b52d27776e30149ee36af4fd4626681c2a3a1
dec:pkts/bytes=0/0, enc:pkts/bytes=0/0
npu_flag=00 npu_rgwy=2003:33:1:1::22 npu_lgwy=2003:33:1:1::1 npu_selid=0 dec_npuid=0 enc_
npuid=0
run_tally=1
The tunnel can still connect to the FQDN address when the IPv6 address changes
# diagnose debug application ike -1
# diagnose debug enable
ike 0:ddns6: set oper down
ike 0:ddns6: carrier down
ike shrank heap by 159744 bytes
ike 0: cache rebuild start
ike 0:ddns6: sending DNS request for remote peer rgwa61.vpnlab.org
ike 0: send IPv6 DNS query : rgwa61.vpnlab.org
ike 0: cache rebuild done
ike 0:ddns6: remote IPv6 DDNS gateway is empty, retry to resolve it
ike 0: DNS response received for remote gateway rgwa61.vpnlab.org
ike 0: DNS rgwa61.vpnlab.org -> 2003:33:1:1::33
ike 2:test:46932: could not send IKE Packet(P1_RETRANSMIT):50.1.1.1:500->50.1.1.2:500,
len=716: error 101:Network is unreachable
ike 0:ddns6: remote IPv6 DDNS gateway is empty, retry to resolve it
ike 0:ddns6: 'rgwa61.vpnlab.org' resolved to 2003:33:1:1::33
ike 0: cache rebuild start
ike 0:ddns6: local:2003:33:1:1::1, remote:2003:33:1:1::33
ike 0:ddns6: cached as static-ddns.
FortiOS 6.4.2 Administration Guide 1402
Fortinet Inc.
VPN
ike 0: cache rebuild done
ike 0:ddns6: auto-negotiate connection
ike 0:ddns6: created connection: 0x155aa510 32 2003:33:1:1::1->2003:33:1:1::33:500.
............................................................................................
.........................
ike 0:ddns6:46933:ddn6:47779: add IPsec SA: SPIs=ac7a5719/7ab888ed
ike 0:ddns6:46933:ddn6:47779: IPsec SA dec spi ac7a5719 key
16:0F27F1D1D02496F90D15A30E2C032678 auth 20:46564E0E86A054374B31E58F95E4458340121BCE
ike 0:ddns6:46933:ddn6:47779: IPsec SA enc spi 7ab888ed key
16:926B12908EE670E1A5DDA6AD8E96607B auth 20:42BF438DC90867B837B0490EAB08E329AB62CBE3
ike 0:ddns6:46933:ddn6:47779: added IPsec SA: SPIs=ac7a5719/7ab888ed
ike 0:ddns6:46933:ddn6:47779: sending SNMP tunnel UP trap
ike 0:ddns6: carrier up
VPN IPsec troubleshooting
See the following IPsec troubleshooting examples:
l Understanding VPN related logs
l IPsec related diagnose commands on page 1405
Understanding VPN related logs
This section provides some IPsec log samples.
IPsec phase1 negotiating
logid="0101037127" type="event" subtype="vpn" level="notice" vd="root" eventtime=1544132571
logdesc="Progress IPsec phase 1" msg="progress IPsec phase 1" action="negotiate"
remip=11.101.1.1
locip=173.1.1.1 remport=500 locport=500 outintf="port13"
cookies="e41eeecb2c92b337/0000000000000000" user="N/A" group="N/A" xauthuser="N/A"
xauthgroup="N/A" assignip=N/A vpntunnel="to_HQ" status="success" init="local"
mode="aggressive" dir="outbound" stage=1 role="initiator" result="OK"
IPsec phase1 negotiated
logid="0101037127" type="event" subtype="vpn" level="notice" vd="root" eventtime=1544132571
logdesc="Progress IPsec phase 1" msg="progress IPsec phase 1" action="negotiate"
remip=11.101.1.1
locip=173.1.1.1 remport=500 locport=500 outintf="port13"
cookies="e41eeecb2c92b337/1230131a28eb4e73" user="N/A" group="N/A" xauthuser="N/A"
xauthgroup="N/A" assignip=N/A vpntunnel="to_HQ" status="success" init="local"
mode="aggressive" dir="outbound" stage=2 role="initiator" result="DONE"
IPsec phase1 tunnel up
logid="0101037138" type="event" subtype="vpn" level="notice" vd="root" eventtime=1544132604
logdesc="IPsec connection status changed" msg="IPsec connection status change"
action="tunnel-up" remip=11.101.1.1 locip=173.1.1.1 remport=500 locport=500 outintf="port13"
FortiOS 6.4.2 Administration Guide 1403
Fortinet Inc.
VPN
cookies="5b1c59fab2029e43/bf517e686d3943d2" user="N/A" group="N/A" xauthuser="N/A"
xauthgroup="N/A" assignip=11.11.11.1 vpntunnel="to_HQ" tunnelip=N/A tunnelid=1530910918
tunneltype="ipsec" duration=0 sentbyte=0 rcvdbyte=0 nextstat=0
IPsec phase2 negotiate
logid="0101037129" type="event" subtype="vpn" level="notice" vd="root" eventtime=1544132604
logdesc="Progress IPsec phase 2" msg="progress IPsec phase 2" action="negotiate"
remip=11.101.1.1
locip=173.1.1.1 remport=500 locport=500 outintf="port13"
cookies="5b1c59fab2029e43/bf517e686d3943d2" user="N/A" group="N/A" xauthuser="N/A"
xauthgroup="N/A" assignip=11.11.11.1 vpntunnel="to_HQ" status="success" init="local"
mode="quick" dir="outbound" stage=1 role="initiator" result="OK"
IPsec phase2 tunnel up
logid="0101037139" type="event" subtype="vpn" level="notice" vd="root" eventtime=1544132604
logdesc="IPsec phase 2 status changed" msg="IPsec phase 2 status change" action="phase2-up"
remip=11.101.1.1 locip=173.1.1.1 remport=500 locport=500 outintf="port13"
cookies="5b1c59fab2029e43/bf517e686d3943d2" user="N/A" group="N/A" xauthuser="N/A"
xauthgroup="N/A" assignip=11.11.11.1 vpntunnel="to_HQ"
phase2_name="to_HQ"
IPsec phase2 sa install
logid="0101037133" type="event" subtype="vpn" level="notice" vd="root" eventtime=1544132604
logdesc="IPsec SA installed" msg="install IPsec SA" action="install_sa" remip=11.101.1.1
locip=173.1.1.1
remport=500 locport=500 outintf="port13" cookies="5b1c59fab2029e43/bf517e686d3943d2"
user="N/A" group="N/A" xauthuser="N/A" xauthgroup="N/A" assignip=11.11.11.1
vpntunnel="to_HQ" role="initiator" in_spi="ca646448" out_spi="747c10c6"
IPsec tunnel statistics
logid="0101037141" type="event" subtype="vpn" level="notice" vd="root" eventtime=1544131118
logdesc="IPsec tunnel statistics" msg="IPsec tunnel statistics" action="tunnel-stats"
remip=10.1.100.15 locip=172.16.200.4 remport=500 locport=500 outintf="mgmt1"
cookies="3539884dbd8f3567/c32e4c1beca91b36"
user="N/A" group="N/A" xauthuser="N/A" xauthgroup="N/A" assignip=N/A
vpntunnel="L2tpoIPsec_0" tunnelip=10.1.100.15 tunnelid=1530910802 tunneltype="ipsec"
duration=6231 sentbyte=57343 rcvdbyte=142640 nextstat=60
IPsec phase2 tunnel down
logid="0101037138" type="event" subtype="vpn" level="notice" vd="root" eventtime=1544132571
logdesc="IPsec connection status changed" msg="IPsec connection status change"
action="tunnel-down" remip=11.101.1.1 locip=173.1.1.1 remport=500 locport=500
outintf="port13" cookies="30820aa390687e39/886e72bf5461fb8d" user="N/A" group="N/A"
xauthuser="N/A" xauthgroup="N/A" assignip=11.11.11.1 vpntunnel="to_HQ" tunnelip=N/A
tunnelid=1530910786 tunneltype="ipsec" duration=6425 sentbyte=504 rcvdbyte=152 nextstat=0
FortiOS 6.4.2 Administration Guide 1404
Fortinet Inc.
VPN
IPsec phase1 sa deleted
logid="0101037134" type="event" subtype="vpn" level="notice" vd="root" eventtime=1544132571
logdesc="IPsec phase 1 SA deleted" msg="delete IPsec phase 1 SA" action="delete_phase1_sa"
remip=11.101.1.1 locip=173.1.1.1 remport=500 locport=500 outintf="port13"
cookies="30820aa390687e39/886e72bf5461fb8d" user="N/A" group="N/A" xauthuser="N/A"
xauthgroup="N/A" assignip=11.11.11.1 vpntunnel="to_HQ"
IPsec related diagnose commands
This section provides IPsec related diagnose commands.
l Daemon IKE summary information list: diagnose vpn ike status
connection: 2/50
IKE SA: created 2/51 established 2/9 times 0/13/40 ms
IPsec SA: created 1/13 established 1/7 times 0/8/30 ms
l IPsec phase1 interface status: diagnose vpn ike gateway list
vd: root/0
name: tofgtc
version: 1
interface: port13 42
addr: 173.1.1.1:500 -> 172.16.200.3:500
created: 4313s ago
IKE SA: created 1/1 established 1/1 time 10/10/10 ms
IPsec SA: created 0/0
id/spi: 92 5639f7f8a5dc54c0/809a6c9bbd266a4b
direction: initiator
status: established 4313-4313s ago = 10ms
proposal: aes128-sha256
key: 74aa3d63d88e10ea-8a1c73b296b06578
lifetime/rekey: 86400/81786
DPD sent/recv: 00000000/00000000
vd: root/0
name: to_HQ
version: 1
interface: port13 42
addr: 173.1.1.1:500 -> 11.101.1.1:500
created: 1013s ago
assigned IPv4 address: 11.11.11.1/255.255.255.252
IKE SA: created 1/1 established 1/1 time 0/0/0 ms
IPsec SA: created 1/1 established 1/1 time 0/0/0 ms
id/spi: 95 255791bd30c749f4/c2505db65210258b
direction: initiator
status: established 1013-1013s ago = 0ms
proposal: aes128-sha256
key: bb101b9127ed5844-1582fd614d5a8a33
lifetime/rekey: 86400/85086
DPD sent/recv: 00000000/00000010
FortiOS 6.4.2 Administration Guide 1405
Fortinet Inc.
VPN
l IPsec phase2 tunnel status: diagnose vpn tunnel list
list all ipsec tunnel in vd 0
----
nname=L2tpoIPsec ver=1 serial=6 172.16.200.4:0->0.0.0.0:0
bound_if=4 lgwy=static/1 tun=intf/0 mode=dialup/2 encap=none/24 options[0018]=npu
create_dev
proxyid_num=0 child_num=0 refcnt=10 ilast=13544 olast=13544 ad=/0
stat: rxp=0 txp=0 rxb=0 txb=0
dpd: mode=on-idle on=0 idle=60000ms retry=3 count=0 seqno=0
natt: mode=none draft=0 interval=0 remote_port=0
run_tally=0
----
name=to_HQ ver=1 serial=7 173.1.1.1:0->11.101.1.1:0
bound_if=42 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/8 options[0008]=npu
proxyid_num=1 child_num=0 refcnt=13 ilast=10 olast=1112 ad=/0
stat: rxp=1 txp=4 rxb=152 txb=336
dpd: mode=on-demand on=1 idle=20000ms retry=3 count=0 seqno=5
natt: mode=none draft=0 interval=0 remote_port=0
proxyid=to_HQ proto=0 sa=1 ref=2 serial=1
src: 0:0.0.0.0/0.0.0.0:0
dst: 0:0.0.0.0/0.0.0.0:0
SA: ref=6 options=10226 type=00 soft=0 mtu=1438 expire=41773/0B replaywin=2048
seqno=5 esn=0 replaywin_lastseq=00000002 itn=0
life: type=01 bytes=0/0 timeout=42900/43200
dec: spi=ca64644a esp=aes key=16 6cc873fdef91337a6cf9b6948972c90f
ah=sha1 key=20 e576dbe3ff92605931e5670ad57763c50c7dc73a
enc: spi=747c10c8 esp=aes key=16 5060ad8d0da6824204e3596c0bd762f4
ah=sha1 key=20 52965cbd5b6ad95212fc825929d26c0401948abe
dec:pkts/bytes=1/84, enc:pkts/bytes=4/608
npu_flag=03 npu_rgwy=11.101.1.1 npu_lgwy=173.1.1.1 npu_selid=5 dec_npuid=2 enc_npuid=2
l Packets encrypted/decrypted counter: diagnose vpn ipsec status
All ipsec crypto devices in use:
NP6_0:
Encryption (encrypted/decrypted)
null : 0 1.
des : 0 1.
3des : 0 1.
aes : 0 1.
aes-gcm : 0 1.
aria : 0 1.
seed : 0 1.
chacha20poly1305 : 0 1.
Integrity (generated/validated)
null : 0 1.
md5 : 0 1.
sha1 : 0 1.
sha256 : 0 1.
sha384 : 0 1.
sha512 : 0 1.
NP6_1:
Encryption (encrypted/decrypted)
null : 0 1.
des : 0 1.
FortiOS 6.4.2 Administration Guide 1406
Fortinet Inc.
VPN
3des : 0 1.
aes : 337152 46069
aes-gcm : 0 1.
aria : 0 1.
seed : 0 1.
chacha20poly1305 : 0 1.
Integrity (generated/validated)
null : 0 1.
md5 : 0 1.
sha1 : 337152 46069
sha256 : 0 1.
sha384 : 0 1.
sha512 : 0 1.
NPU Host Offloading:
Encryption (encrypted/decrypted)
null : 0 1.
des : 0 1.
3des : 0 1.
aes : 38 1.
aes-gcm : 0 1.
aria : 0 1.
seed : 0 1.
chacha20poly1305 : 0 1.
Integrity (generated/validated)
null : 0 1.
md5 : 0 1.
sha1 : 38 1.
sha256 : 0 1.
sha384 : 0 1.
sha512 : 0 1.
CP8:
Encryption (encrypted/decrypted)
null : 0 1.
des : 0 1.
3des : 1337 1582
aes : 71 11426
aes-gcm : 0 1.
aria : 0 1.
seed : 0 1.
chacha20poly1305 : 0 1.
Integrity (generated/validated)
null : 0 1.
md5 : 48 28
sha1 : 1360 12980
sha256 : 0 1.
sha384 : 0 1.
sha512 : 0 1.
SOFTWARE:
Encryption (encrypted/decrypted)
null : 0 1.
des : 0 1.
3des : 0 1.
aes : 0 1.
FortiOS 6.4.2 Administration Guide 1407
Fortinet Inc.
VPN
aes-gcm : 0 1.
aria : 0 1.
seed : 0 1.
chacha20poly1305 : 0 1.
Integrity (generated/validated)
null : 0 1.
md5 : 0 1.
sha1 : 0 1.
sha256 : 0 1.
sha384 : 0 1.
sha512 : 0 1.
l diagnose debug application ike -1
l diagnose vpn ike log-filter dst-addr4 11.101.1.1
l diagnose vpn ike log-filter src-addr4 173.1.1.1
# ike 0:to_HQ:101: initiator: aggressive mode is sending 1st message...
ike 0:to_HQ:101: cookie dff03f1d4820222a/0000000000000000
ike 0:to_HQ:101: sent IKE msg (agg_i1send): 173.1.1.1:500->11.101.1.1:500, len=912,
id=dff03f1d4820222a/0000000000000000
ike 0: comes 11.101.1.1:500->173.1.1.1:500,ifindex=42....
ike 0: IKEv1 exchange=Aggressive id=dff03f1d4820222a/6c2caf4dcf5bab75 len=624
ike 0:to_HQ:101: initiator: aggressive mode get 1st response...
ike 0:to_HQ:101: VID RFC 3947 4A131C81070358455C5728F20E95452F
ike 0:to_HQ:101: VID DPD AFCAD71368A1F1C96B8696FC77570100
ike 0:to_HQ:101: DPD negotiated
ike 0:to_HQ:101: VID draft-ietf-ipsra-isakmp-xauth-06.txt 09002689DFD6B712
ike 0:to_HQ:101: VID CISCO-UNITY 12F5F28C457168A9702D9FE274CC0204
ike 0:to_HQ:101: peer supports UNITY
ike 0:to_HQ:101: VID FORTIGATE 8299031757A36082C6A621DE00000000
ike 0:to_HQ:101: peer is [[QualityAssurance62/FortiGate]]/FortiOS (v0 b0)
ike 0:to_HQ:101: VID FRAGMENTATION 4048B7D56EBCE88525E7DE7F00D6C2D3
ike 0:to_HQ:101: VID FRAGMENTATION 4048B7D56EBCE88525E7DE7F00D6C2D3C0000000
ike 0:to_HQ:101: peer identifier IPV4_ADDR 11.101.1.1
ike 0:to_HQ:101: negotiation result
ike 0:to_HQ:101: proposal id = 1:
ike 0:to_HQ:101: protocol id = ISAKMP:
ike 0:to_HQ:101: trans_id = KEY_IKE.
ike 0:to_HQ:101: encapsulation = IKE/none
ike 0:to_HQ:101: type=OAKLEY_ENCRYPT_ALG, val=AES_CBC, key-len=128
ike 0:to_HQ:101: type=OAKLEY_HASH_ALG, val=SHA2_256.
ike 0:to_HQ:101: type=AUTH_METHOD, val=PRESHARED_KEY_XAUTH_I.
ike 0:to_HQ:101: type=OAKLEY_GROUP, val=MODP2048.
ike 0:to_HQ:101: ISAKMP SA lifetime=86400
ike 0:to_HQ:101: received NAT-D payload type 20
ike 0:to_HQ:101: received NAT-D payload type 20
ike 0:to_HQ:101: selected NAT-T version: RFC 3947
ike 0:to_HQ:101: NAT not detected
ike 0:to_HQ:101: ISAKMP SA dff03f1d4820222a/6c2caf4dcf5bab75 key
16:D81CAE6B2500435BFF195491E80148F3
ike 0:to_HQ:101: PSK authentication succeeded
ike 0:to_HQ:101: authentication OK
ike 0:to_HQ:101: add INITIAL-CONTACT
ike 0:to_HQ:101: sent IKE msg (agg_i2send): 173.1.1.1:500->11.101.1.1:500, len=172,
id=dff03f1d4820222a/6c2caf4dcf5bab75
ike 0:to_HQ:101: established IKE SA dff03f1d4820222a/6c2caf4dcf5bab75
FortiOS 6.4.2 Administration Guide 1408
Fortinet Inc.
VPN
ike 0: comes 11.101.1.1:500->173.1.1.1:500,ifindex=42....
ike 0: IKEv1 exchange=Mode config id=dff03f1d4820222a/6c2caf4dcf5bab75:97d88fb4 len=92
ike 0:to_HQ:101: mode-cfg type 16521 request 0:
ike 0:to_HQ:101: mode-cfg type 16522 request 0:
ike 0:to_HQ:101: sent IKE msg (cfg_send): 173.1.1.1:500->11.101.1.1:500, len=108,
id=dff03f1d4820222a/6c2caf4dcf5bab75:97d88fb4
ike 0: comes 11.101.1.1:500->173.1.1.1:500,ifindex=42....
ike 0: IKEv1 exchange=Mode config id=dff03f1d4820222a/6c2caf4dcf5bab75:3724f295 len=92
ike 0:to_HQ:101: sent IKE msg (cfg_send): 173.1.1.1:500->11.101.1.1:500, len=92,
id=dff03f1d4820222a/6c2caf4dcf5bab75:3724f295
ike 0:to_HQ:101: initiating mode-cfg pull from peer
ike 0:to_HQ:101: mode-cfg request APPLICATION_VERSION
ike 0:to_HQ:101: mode-cfg request INTERNAL_IP4_ADDRESS
ike 0:to_HQ:101: mode-cfg request INTERNAL_IP4_NETMASK
ike 0:to_HQ:101: mode-cfg request UNITY_SPLIT_INCLUDE
ike 0:to_HQ:101: mode-cfg request UNITY_PFS
ike 0:to_HQ:101: sent IKE msg (cfg_send): 173.1.1.1:500->11.101.1.1:500, len=140,
id=dff03f1d4820222a/6c2caf4dcf5bab75:3bca961f
ike 0: comes 11.101.1.1:500->173.1.1.1:500,ifindex=42....
ike 0: IKEv1 exchange=Mode config id=dff03f1d4820222a/6c2caf4dcf5bab75:3bca961f len=172
ike 0:to_HQ:101: mode-cfg type 1 response 4:0B0B0B01
ike 0:to_HQ:101: mode-cfg received INTERNAL_IP4_ADDRESS 11.11.11.1
ike 0:to_HQ:101: mode-cfg type 2 response 4:FFFFFFFC
ike 0:to_HQ:101: mode-cfg received INTERNAL_IP4_NETMASK 255.255.255.252
ike 0:to_HQ:101: mode-cfg received UNITY_PFS 1
ike 0:to_HQ:101: mode-cfg type 28676 response
28:0A016400FFFFFF000000000000000A016500FFFFFF00000000000000
ike 0:to_HQ:101: mode-cfg received UNITY_SPLIT_INCLUDE 0 10.1.100.0/255.255.255.0:0
local port 0
ike 0:to_HQ:101: mode-cfg received UNITY_SPLIT_INCLUDE 0 10.1.101.0/255.255.255.0:0
local port 0
ike 0:to_HQ:101: mode-cfg received APPLICATION_VERSION 'FortiGate-100D
v6.0.3,build0200,181009 (GA)'
ike 0:to_HQ: mode-cfg add 11.11.11.1/255.255.255.252 to 'to_HQ'/58
ike 0:to_HQ: set oper up
ike 0:to_HQ: schedule auto-negotiate
ike 0:to_HQ:101: no pending Quick-Mode negotiations
ike shrank heap by 159744 bytes
ike 0:to_HQ:to_HQ: IPsec SA connect 42 173.1.1.1->11.101.1.1:0
ike 0:to_HQ:to_HQ: using existing connection
# ike 0:to_HQ:to_HQ: config found
ike 0:to_HQ:to_HQ: IPsec SA connect 42 173.1.1.1->11.101.1.1:500 negotiating
ike 0:to_HQ:101: cookie dff03f1d4820222a/6c2caf4dcf5bab75:32f4cc01
ike 0:to_HQ:101:to_HQ:259: initiator selectors 0 0:0.0.0.0/0.0.0.0:0:0-
>0:0.0.0.0/0.0.0.0:0:0
ike 0:to_HQ:101: sent IKE msg (quick_i1send): 173.1.1.1:500->11.101.1.1:500, len=620,
id=dff03f1d4820222a/6c2caf4dcf5bab75:32f4cc01
ike 0: comes 11.101.1.1:500->173.1.1.1:500,ifindex=42....
ike 0: IKEv1 exchange=Quick id=dff03f1d4820222a/6c2caf4dcf5bab75:32f4cc01 len=444
ike 0:to_HQ:101:to_HQ:259: responder selectors 0:0.0.0.0/0.0.0.0:0->0:0.0.0.0/0.0.0.0:0
ike 0:to_HQ:101:to_HQ:259: my proposal:
ike 0:to_HQ:101:to_HQ:259: proposal id = 1:
ike 0:to_HQ:101:to_HQ:259: protocol id = IPSEC_ESP:
ike 0:to_HQ:101:to_HQ:259: PFS DH group = 14
ike 0:to_HQ:101:to_HQ:259: trans_id = ESP_AES_CBC (key_len = 128)
ike 0:to_HQ:101:to_HQ:259: encapsulation = ENCAPSULATION_MODE_TUNNEL
FortiOS 6.4.2 Administration Guide 1409
Fortinet Inc.
VPN
ike 0:to_HQ:101:to_HQ:259: type = AUTH_ALG, val=SHA1
ike 0:to_HQ:101:to_HQ:259: trans_id = ESP_AES_CBC (key_len = 256)
ike 0:to_HQ:101:to_HQ:259: encapsulation = ENCAPSULATION_MODE_TUNNEL
ike 0:to_HQ:101:to_HQ:259: type = AUTH_ALG, val=SHA1
ike 0:to_HQ:101:to_HQ:259: trans_id = ESP_AES_CBC (key_len = 128)
ike 0:to_HQ:101:to_HQ:259: encapsulation = ENCAPSULATION_MODE_TUNNEL
ike 0:to_HQ:101:to_HQ:259: type = AUTH_ALG, val=SHA2_256
ike 0:to_HQ:101:to_HQ:259: trans_id = ESP_AES_CBC (key_len = 256)
ike 0:to_HQ:101:to_HQ:259: encapsulation = ENCAPSULATION_MODE_TUNNEL
ike 0:to_HQ:101:to_HQ:259: type = AUTH_ALG, val=SHA2_256
ike 0:to_HQ:101:to_HQ:259: trans_id = ESP_AES_GCM_16 (key_len = 128)
ike 0:to_HQ:101:to_HQ:259: encapsulation = ENCAPSULATION_MODE_TUNNEL
ike 0:to_HQ:101:to_HQ:259: type = AUTH_ALG, val=NULL
ike 0:to_HQ:101:to_HQ:259: trans_id = ESP_AES_GCM_16 (key_len = 256)
ike 0:to_HQ:101:to_HQ:259: encapsulation = ENCAPSULATION_MODE_TUNNEL
ike 0:to_HQ:101:to_HQ:259: type = AUTH_ALG, val=NULL
ike 0:to_HQ:101:to_HQ:259: trans_id = ESP_CHACHA20_POLY1305 (key_len = 256)
ike 0:to_HQ:101:to_HQ:259: encapsulation = ENCAPSULATION_MODE_TUNNEL
ike 0:to_HQ:101:to_HQ:259: type = AUTH_ALG, val=NULL
ike 0:to_HQ:101:to_HQ:259: incoming proposal:
ike 0:to_HQ:101:to_HQ:259: proposal id = 1:
ike 0:to_HQ:101:to_HQ:259: protocol id = IPSEC_ESP:
ike 0:to_HQ:101:to_HQ:259: PFS DH group = 14
ike 0:to_HQ:101:to_HQ:259: trans_id = ESP_AES_CBC (key_len = 128)
ike 0:to_HQ:101:to_HQ:259: encapsulation = ENCAPSULATION_MODE_TUNNEL
ike 0:to_HQ:101:to_HQ:259: type = AUTH_ALG, val=SHA1
ike 0:to_HQ: schedule auto-negotiate
ike 0:to_HQ:101:to_HQ:259: replay protection enabled
ike 0:to_HQ:101:to_HQ:259: SA life soft seconds=42902.
ike 0:to_HQ:101:to_HQ:259: SA life hard seconds=43200.
ike 0:to_HQ:101:to_HQ:259: IPsec SA selectors #src=1 #dst=1
ike 0:to_HQ:101:to_HQ:259: src 0 4 0:0.0.0.0/0.0.0.0:0
ike 0:to_HQ:101:to_HQ:259: dst 0 4 0:0.0.0.0/0.0.0.0:0
ike 0:to_HQ:101:to_HQ:259: add IPsec SA: SPIs=ca64644b/747c10c9
ike 0:to_HQ:101:to_HQ:259: IPsec SA dec spi ca64644b key
16:D5C60F1A3951B288CE4DEC7E04D2119D auth 20:F872A7A26964208A9AA368A31AEFA3DB3F3780BC
ike 0:to_HQ:101:to_HQ:259: IPsec SA enc spi 747c10c9 key
16:97952E1594F718128D9D7B09400856EA auth 20:4D5E5BC45A9D5A9A4631E911932F5650A4639A37
ike 0:to_HQ:101:to_HQ:259: added IPsec SA: SPIs=ca64644b/747c10c9
ike 0:to_HQ:101:to_HQ:259: sending SNMP tunnel UP trap
ike 0:to_HQ:101: sent IKE msg (quick_i2send): 173.1.1.1:500->11.101.1.1:500, len=76,
id=dff03f1d4820222a/6c2caf4dcf5bab75:32f4cc01
SSL VPN
The following topics provide information about SSL VPN in FortiOS 6.4.2.
l SSL VPN best practices on page 1411
l SSL VPN quick start on page 1413
l SSL VPN tunnel mode on page 1420
l SSL VPN web mode for remote user on page 1427
l SSL VPN authentication on page 1431
l SSL VPN to IPsec VPN on page 1513
FortiOS 6.4.2 Administration Guide 1410
Fortinet Inc.
VPN
l SSL VPN protocols on page 1523
l SSL VPN troubleshooting on page 1524
SSL VPN best practices
Securing remote access to network resources is a critical part of security operations. SSL VPN allows administrators to
configure, administer, and deploy a remote access strategy for their remote workers.
Choosing the correct mode of operation and applying the proper levels of security are integral to providing optimal
performance and user experience, and keeping your user data safe.
The below guidelines outline selecting the correct SSL VPN mode for your deployment and employing best practices to
ensure that your data are protected.
Information about SSL VPN throughput and maximum concurrent users is available on your device's datasheet; see
Next-Generation Firewalls Models and Specifications.
Tunnel mode
In tunnel mode, the SSL VPN client encrypts all traffic from the remote client computer and sends it to the FortiGate
through an SSL VPN tunnel over the HTTPS link between the user and the FortiGate.
The FortiGate establishes a tunnel with the client, and assigns a virtual IP (VIP) address to the client from a range
reserved addresses. While the underlying protocols are different, the outcome is very similar to a IPsec VPN tunnel. All
client traffic is encrypted, allowing the users and networks to exchange a wide range of traffic, regardless of the
application or protocols.
Use this mode if you require:
l A wide range of applications and protocols to be accessed by the remote client.
l No proxying is done by the FortiGate.
l Straightforward configuration and administration, as traffic is controlled by firewall policies.
l A transparent experience for the end user. For example, a user that needs to RDP to their server only requires a
tunnel connection; they can then use the usual client application, like Windows Remote Desktop, to connect.
Full tunneling forces all traffic to pass through the FortiGate (see SSL VPN full tunnel for remote user on page 1420).
Split tunneling only routes traffic to the designated network through the FortiGate (see SSL VPN split tunnel for remote
user on page 1413).
Limitations
Tunnel mode requires that the FortiClient VPN client be installed on the remote end. The standalone FortiClient VPN
client is free to use, and can accommodate SSL VPN and IPsec VPN tunnels. For supported operating systems, see the
FortiClient Technical Specifications.
Web mode
Web-only mode provides clientless network access using a web browser with built-in SSL encryption. Users
authenticate to FortiGate's SSL VPN Web Portal, which provides access to network services and resources, including
HTTP/HTTPS, Telnet, FTP, SMB/CIFS, VNC, RDP, and SSH. When a user starts a connection to a server from the web
FortiOS 6.4.2 Administration Guide 1411
Fortinet Inc.
VPN
portal, FortiOS proxies this communication with the server. All communication between the FortiGate and the user
continues to be over HTTPS, regardless of the service that is being accesssed.
Use this mode if you require:
l A clientless solution in which all remote services are access through a web portal.
l Tight control over the contents of the web portal.
l Limited services provided to the remote users.
Limitations
l Multiple applications and protocols are not supported.
l VNC and RDP access might have limitations, such as certain shortcut keys not being supported.
l In some configurations RDP can consume a significant amount of memory and CPU time.
l Firewall performance might decrease as remote usage increases.
l Highly customized web pages might not render correctly.
Security best practices
Integrate with authentication servers
For networks with many users, integrate your user configuration with existing authentication servers through LDAP,
RADIUS, or FortiAuthenticator.
By integrating with existing authentication servers, such as Windows AD, there is a lower change of making mistakes
when configuring local users and user groups. Your administration effort is also reduces.
See SSL VPN with LDAP user authentication on page 1431 for more information.
Use a non-factory SSL certificate for the SSL VPN portal
Your certificate should identify your domain so that a remote user can recognize the identity of the server or portal that
they are accessing through a trusted CA.
The default Fortinet factory self-signed certificates are provided to simplify initial installation and testing. If you use these
certificates you are vulnerable to man-in-the-middle attacks, where an attacker spoofs your certificate, compromises
your connection, and steals your personal information. It is highly recommended that you purchase a server certificate
from a trusted CA to allow remote users to connect to SSL VPN with confidence. See Purchase and import a signed SSL
certificate on page 827 for more information.
Enabling the Do not Warn Invalid Server Certificate option on the client disables the certificate warning message,
potentially allowing users to accidentally connect to untrusted servers. Disabling invalid server certificate warnings is not
recommended.
Use multi-factor authentication
Multi-factor authentication (MFA) ensures that the end-user is who they claim to be by requiring at least two factors - a
piece of information that the user knows (password), and an asset that the user has (OTP). A third factor, something a
user is (fingerprint or face), may be enabled as well. FortiToken Mobile is typically used for MFA.
FortiGate comes with two free FortiTokens, and more can be purchased from the FortiToken Mobile iOS app or through
Fortinet partners.
See SSL VPN with FortiToken mobile push authentication on page 1454 for more information.
FortiOS 6.4.2 Administration Guide 1412
Fortinet Inc.
VPN
2FA, a subset of MFA, can also be set up with email tokens. See Email Two-Factor Authentication on FortiGate for
information.
Deploy user certificates for remote SSL VPN users
This method of 2FA uses a user certificate as the second authentication factor. This is more secure, as it identifies the
end user using a certificate. The configuration and administration of this solution is significantly more complicated, and
requires administrators with advanced knowledge of the FortiGate and certificate deployment.
See SSL VPN with certificate authentication on page 1492 for more information.
Define your minimum supported TLS version and cipher suites
Minimum and maximum supported TLS version can be configured in the FortiGate CLI. The cipher algorithm can also be
customized.
See How to control the SSL version and cipher suite for SSL VPN for more information.
Properly administer firewall policies and profiles against only the access level required for the remote
user
Users do not all require the same access. Access should only be granted after careful considerations. Typically, users
are placed in groups, and each group is allowed access to limited resources.
Using SSL VPN realms simplifies defining the control structure for mapping users and groups to the appropriate
resources.
See SSL VPN multi-realm on page 1506 for more information.
SSL VPN quick start
The following topics provide introductory instructions on configuring SSL VPN:
l SSL VPN split tunnel for remote user on page 1413
l Connecting from FortiClient VPN client on page 1416
l Set up FortiToken multi-factor authentication on page 1418
l Connecting from FortiClient with FortiToken on page 1419
SSL VPN split tunnel for remote user
This is a sample configuration of remote users accessing the corporate network and internet through an SSL VPN by
tunnel mode using FortiClient but accessing the Internet without going through the SSL VPN tunnel.
FortiOS 6.4.2 Administration Guide 1413
Fortinet Inc.
VPN
Sample topology
Sample configuration
WAN interface is the interface connected to ISP. This example shows static mode. You can also use DHCP or PPPoE
mode. The SSL VPN connection is established over the WAN interface.
The split tunneling routing address cannot explicitly use an FQDN or an address group that
includes an FQDN. To use an FQDN, leave the routing address blank and apply the FQDN as
the destination address of the firewall policy.
To configure SSL VPN using the GUI:
1. Configure the interface and firewall address. The port1 interface connects to the internal network.
a. Go to Network > Interfaces and edit the wan1 interface.
b. Set IP/Network Mask to 172.20.120.123/255.255.255.0.
c. Edit port1 interface and set IP/Network Mask to 192.168.1.99/255.255.255.0.
d. Click OK.
e. Go to Policy & Objects > Address and create an address for internal subnet 192.168.1.0.
2. Configure user and user group.
a. Go to User & Authentication > User Definition to create a local user sslvpnuser1.
b. Go to User & Authentication > User Groups to create a group sslvpngroup with the member sslvpnuser1.
3. Configure SSL VPN web portal.
a. Go to VPN > SSL-VPN Portals to create a tunnel mode only portal my-split-tunnel-portal.
b. Enable Split Tunneling.
c. Select Routing Address to define the destination network that will be routed through the tunnel. Leave
undefined to use the destination in the respective firewall policies.
4. Configure SSL VPN settings.
a. Go to VPN > SSL-VPN Settings.
b. For Listen on Interface(s), select wan1.
c. Set Listen on Port to 10443.
d. Choose a certificate for Server Certificate. The default is Fortinet_Factory.
e. In Authentication/Portal Mapping All Other Users/Groups, set the Portal to tunnel-access.
f. Create new Authentication/Portal Mapping for group sslvpngroup mapping portal my-split-tunnel-portal.
FortiOS 6.4.2 Administration Guide 1414
Fortinet Inc.
VPN
5. Configure SSL VPN firewall policy.
a. Go to Policy & Objects > Firewall Policy.
b. Fill in the firewall policy name. In this example, sslvpn split tunnel access.
c. Incoming interface must be SSL-VPN tunnel interface(ssl.root).
d. Choose an Outgoing Interface. In this example, port1.
e. Set the Source to all and group to sslvpngroup.
f. In this example, the Destination is all.
g. Set Schedule to always, Service to ALL, and Action to Accept.
h. Click OK.
To configure SSL VPN using the CLI:
1. Configure the interface and firewall address.
config system interface
edit "wan1"
set vdom "root"
set ip 172.20.120.123 255.255.255.0
next
end
2. Configure internal interface and protected subnet, then connect the port1 interface to the internal network.
config system interface
edit "port1"
set vdom "root"
set ip 192.168.1.99 255.255.255.0
next
end
config firewall address
edit "192.168.1.0"
set subnet 192.168.1.0 255.255.255.0
next
end
3. Configure user and user group.
config user local
edit "sslvpnuser1"
set type password
set passwd your-password
next
end
config user group
edit "sslvpngroup"
set member "sslvpnuser1"
next
end
4. Configure SSL VPN web portal.
config vpn ssl web portal
edit "my-split-tunnel-portal"
set tunnel-mode enable
set split-tunneling enable
FortiOS 6.4.2 Administration Guide 1415
Fortinet Inc.
VPN
set split-tunneling-routing-address "192.168.1.0"
set ip-pools "SSLVPN_TUNNEL_ADDR1"
next
end
5. Configure SSL VPN settings.
config vpn ssl settings
set servercert "Fortinet_Factory"
set tunnel-ip-pools "SSLVPN_TUNNEL_ADDR1"
set tunnel-ipv6-pools "SSLVPN_TUNNEL_IPv6_ADDR1"
set source-interface "wan1"
set source-address "all"
set source-address6 "all"
set default-portal "full-access"
config authentication-rule
edit 1
set groups "sslvpngroup"
set portal "my-split-tunnel-portal"
next
next
end
6. Configure one SSL VPN firewall policy to allow remote user to access the internal network. Traffic is dropped from
internal to remote client.
config firewall policy
edit 1
set name "sslvpn split tunnel access"
set srcintf "ssl.root"
set dstintf "port1"
set srcaddr "all"
set dstaddr "192.168.1.0"
set groups “sslvpngroup”
set action accept
set schedule "always"
set service "ALL"
next
end
Connecting from FortiClient VPN client
For FortiGate administrators, a free version of FortiClient VPN is available which supports basic IPsec and SSL VPN and
does not require registration with EMS. This version does not include central management, technical support, or some
advanced features.
Downloading and installing the standalone FortiCient VPN client
You can download the free VPN client from FNDN or FortiClient.com.
When the free VPN client is run for the first time, it displays a disclaimer. You cannot configure or create a VPN
connection until you accept the disclaimer and click I accept:
FortiOS 6.4.2 Administration Guide 1416
Fortinet Inc.
VPN
Configuring an SSL VPN connection
To configure an SSL VPN connection:
1. On the Remote Access tab, click on the settings icon and then Add a New Connection.
2. Select SSL-VPN, then configure the following settings:
Connection Name SSLVPNtoHQ
Description (Optional)
Remote Gateway 172.20.120.123
Customize port 10443
Client Certificate Select Prompt on connect or the certificate from the dropdown list.
Authentication Select Prompt on login for a prompt on the connection screen
3. Click Save to save the VPN connection.
FortiOS 6.4.2 Administration Guide 1417
Fortinet Inc.
VPN
Connecting to SSL VPN
To connect to SSL VPN:
1. On the Remote Access tab, select the VPN connection from the dropdown list.
Optionally, you can right-click the FortiTray icon in the system tray and select a VPN configuration to connect.
2. Enter your username and password.
3. Click the Connect button.
4. After connecting, you can now browse your remote network. Traffic to 192.168.1.0 goes through the tunnel, while
other traffic goes through the local gateway. FortiClient displays the connection status, duration, and other relevant
information.
5. Click the Disconnect button when you are ready to terminate the VPN session.
Checking the SSL VPN connection
To check the SSL VPN connection using the GUI:
1. On the FortiGate, go to VPN > Monitor > SSL-VPN Monitor to verify the list of SSL users.
2. On the FortiGate, go to Log & Report > Forward Traffic to view the details of the SSL entry.
To check the tunnel log in using the CLI:
get vpn ssl monitor
SSL VPN Login Users:
Index User Auth Type Timeout From HTTP in/out HTTPS in/out
0 sslvpnuser1 1(1) 291 10.1.100.254 0/0 0/0
SSL VPN sessions:
Index User Source IP Duration I/O Bytes Tunnel/Dest IP
0 sslvpnuser1 10.1.100.254 9 22099/43228 10.212.134.200
Set up FortiToken multi-factor authentication
This configuration adds multi-factor authentication (MFA) to the split tunnel configuration (SSL VPN split tunnel for
remote user on page 1413). It uses one of the two free mobile FortiTokens that is already installed on the FortiGate.
To configure MFA using the GUI:
1. Configure a user and user group:
a. Go to User & Authentication > User Definition and edit local user sslvpnuser1.
b. Enable Two-factor Authentication and select one mobile Token from the list,
c. Enter the user's Email Address.
d. Enable Send Activation Code and select Email.
e. Click Next and click Submit.
2. Activate the mobile token.
When a FortiToken is added to user sslvpnuser1, an email is sent to the user's email address. Follow the
instructions to install your FortiToken mobile application on your device and activate your token.
FortiOS 6.4.2 Administration Guide 1418
Fortinet Inc.
VPN
To configure MFA using the CLI:
1. Configure a user and user group:
config user local
edit "sslvpnuser1"
set type password
set two-factor fortitoken
set fortitoken <select mobile token for the option list>
set email-to <user's email address>
set passwd <user's password>
next
end
config user group
edit "sslvpngroup"
set member "sslvpnuser1"
next
end
2. Activate the mobile token.
When a FortiToken is added to user sslvpnuser1, an email is sent to the user's email address. Follow the
instructions to install your FortiToken mobile application on your device and activate your token.
Connecting from FortiClient with FortiToken
To activate your FortiToken:
1. On your device, open FortiToken Mobile. If this is your first time opening the application, it may prompt you to create
a PIN for secure access to the application and tokens.
2. You should have received your notification via email, select + and use the device camera to scan the token QR code
in your email.
3. FortiToken Mobile provisions and activates your token and generates token codes immediately. To view the OTP's
digits, select the eye icon. After you open the application, FortiToken Mobile generates a new six-digit OTP every 30
seconds.
FortiOS 6.4.2 Administration Guide 1419
Fortinet Inc.
VPN
To connect to SSL VPN:
1. On the Remote Access tab, select the VPN connection from the dropdown list.
Optionally, you can right-click the FortiTray icon in the system tray and select a VPN configuration to connect.
2. Enter your username and password.
3. Click the Connect button.
4. A Token field will appear, prompting you for the FortiToken code. Enter the FortiToken code from your Mobile
device.
5. After connecting, you can now browse your remote network. Traffic to 192.168.1.0 goes through the tunnel, while
other traffic goes through the local gateway. FortiClient displays the connection status, duration, and other relevant
information.
6. Click the Disconnect button when you are ready to terminate the VPN session.
SSL VPN tunnel mode
The following topics provide instructions on configuring SSL VPN tunnel mode:
l SSL VPN full tunnel for remote user
l SSL VPN tunnel mode host check
SSL VPN full tunnel for remote user
This is a sample configuration of remote users accessing the corporate network and internet through an SSL VPN by
tunnel mode using FortiClient.
Sample topology
Sample configuration
WAN interface is the interface connected to ISP. This example shows static mode. You can also use DHCP or PPPoE
mode. The SSL VPN connection is established over the WAN interface.
To configure SSL VPN using the GUI:
1. Configure the interface and firewall address:
a. Go to Network > Interfaces and edit the wan1 interface.
b. Set IP/Network Mask to 172.20.120.123/255.255.255.0.
c. Edit port1 interface and set IP/Network Mask to 192.168.1.99/255.255.255.0.
d. Click OK.
FortiOS 6.4.2 Administration Guide 1420
Fortinet Inc.
VPN
2. Configure user and user group:
a. Go to User & Authentication > User Definition to create a local user sslvpnuser1.
b. Go to User & Authentication > User Groups to create a group sslvpngroup with the member sslvpnuser1.
3. Configure SSL VPN web portal:
a. Go to VPN > SSL-VPN Portals to create a tunnel mode only portal my-full-tunnel-portal.
b. Disable Split Tunneling.
4. Configure SSL VPN settings:
a. Go to VPN > SSL-VPN Settings.
b. For Listen on Interface(s), select wan1.
c. Set Listen on Port to 10443.
d. Choose a certificate for Server Certificate. The default is Fortinet_Factory.
e. In Authentication/Portal Mapping All Other Users/Groups, set the Portal to tunnel-access.
f. Create new Authentication/Portal Mapping for group sslvpngroup mapping portal my-full-tunnel-portal.
5. Configure SSL VPN firewall policies to allow remote user to access the internal network:
a. Go to Policy & Objects > Firewall Policy and click Create New.
b. Set Name to sslvpn tunnel mode access.
c. Set Incoming Interface to SSL-VPN tunnel interface(ssl.root).
d. Set Outgoing Interface to port1.
e. Set the Source Address to all and User to sslvpngroup.
f. Set Destination to all, Schedule to always, Service to ALL, and Action to Accept.
g. Click OK.
h. Click Create New.
i. Set Name to sslvpn tunnel mode outgoing.
j. Configure the same settings as the previous policy, except set Outgoing Interface to wan1.
k. Click OK.
To configure SSL VPN using the CLI:
1. Configure the interface and firewall address.
config system interface
edit "wan1"
set vdom "root"
set ip 172.20.120.123 255.255.255.0
next
end
2. Configure the internal interface and protected subnet, then connect the port1 interface to the internal network.
config system interface
edit "port1"
set vdom "root"
set ip 192.168.1.99 255.255.255.0
next
end
3. Configure user and user group.
config user local
edit "sslvpnuser1"
set type password
FortiOS 6.4.2 Administration Guide 1421
Fortinet Inc.
VPN
set passwd your-password
next
end
config user group
edit "sslvpngroup"
set member "sslvpnuser1"
next
end
4. Configure SSL VPN web portal and predefine RDP bookmark for windows server.
config vpn ssl web portal
edit "my-full-tunnel-portal"
set tunnel-mode enable
set split-tunneling disable
set ip-pools "SSLVPN_TUNNEL_ADDR1"
next
end
5. Configure SSL VPN settings.
config vpn ssl settings
set servercert "Fortinet_Factory"
set tunnel-ip-pools "SSLVPN_TUNNEL_ADDR1"
set tunnel-ipv6-pools "SSLVPN_TUNNEL_IPv6_ADDR1"
set source-interface "wan1"
set source-address "all"
set source-address6 "all"
set default-portal "full-access"
config authentication-rule
edit 1
set groups "sslvpngroup"
set portal "my-full-tunnel-portal"
next
end
end
6. Configure SSL VPN firewall policies to allow remote user to access the internal network. Traffic is dropped from
internal to remote client.
config firewall policy
edit 1
set name "sslvpn tunnel mode access"
set srcintf "ssl.root"
set dstintf "port1"
set srcaddr "all"
set dstaddr "all"
set groups "sslvpngroup"
set action accept
set schedule "always"
set service "ALL"
next
edit 2
set name "sslvpn tunnel mode outgoing"
set srcintf "ssl.root"
set dstintf "wan1"
set srcaddr "all"
FortiOS 6.4.2 Administration Guide 1422
Fortinet Inc.
VPN
set dstaddr "all"
set groups "sslvpngroup"
set action accept
set schedule "always"
set service "ALL"
next
end
To see the results:
1. Download FortiClient from www.forticlient.com.
2. Open the FortiClient Console and go to Remote Access.
3. Add a new connection:
l Set VPN Type to SSL VPN.
l Set Remote Gateway to the IP of the listening FortiGate interface, in this example, 172.20.120.123.
4. Select Customize Port and set it to 10443.
5. Save your settings.
6. Use the credentials you've set up to connect to the SSL VPN tunnel.
7. After connection, all traffic except the local subnet will go through the tunnel FGT.
8. Go to VPN > Monitor > SSL-VPN Monitor to verify the list of SSL users.
9. On the FortiGate, go to Log & Report > Forward Traffic and view the details for the SSL entry.
SSL VPN tunnel mode host check
This is a sample configuration of remote users accessing the corporate network through an SSL VPN by tunnel mode
using FortiClient with AV host check.
Sample topology
Sample configuration
WAN interface is the interface connected to ISP. This example shows static mode. You can also use DHCP or PPPoE
mode. The SSL VPN connection is established over the WAN interface.
The split tunneling routing address cannot explicitly use an FQDN or an address group that
includes an FQDN. To use an FQDN, leave the routing address blank and apply the FQDN as
the destination address of the firewall policy.
FortiOS 6.4.2 Administration Guide 1423
Fortinet Inc.
VPN
To configure SSL VPN using the GUI:
1. Configure the interface and firewall address. The port1 interface connects to the internal network.
a. Go to Network > Interfaces and edit the wan1 interface.
b. Set IP/Network Mask to 172.20.120.123/255.255.255.0.
c. Edit port1 interface and set IP/Network Mask to 192.168.1.99/255.255.255.0.
d. Click OK.
e. Go to Policy & Objects > Address and create an address for internet subnet 192.168.1.0.
2. Configure user and user group.
a. Go to User & Authentication > User Definition to create a local user sslvpnuser1.
b. Go to User & Authentication > User Groups to create a group sslvpngroup with the member sslvpnuser1.
3. Configure SSL VPN web portal.
a. Go to VPN > SSL-VPN Portals to create a tunnel mode only portal my-split-tunnel-portal.
b. Enable Tunnel Mode and Enable Split Tunneling.
c. Select Routing Address.
4. Configure SSL VPN settings.
a. Go to VPN > SSL-VPN Settings.
b. For Listen on Interface(s), select wan1.
c. Set Listen on Port to 10443.
d. Choose a certificate for Server Certificate.
It is HIGHLY recommended that you acquire a signed certificate for you installation.
Please review the SSL VPN best practices on page 1411 and learn how to Purchase
and import a signed SSL certificate on page 827.
e. In Authentication/Portal Mapping All Other Users/Groups, set the Portal to tunnel-access.
f. Create new Authentication/Portal Mapping for group sslvpngroup mapping portal my-split-tunnel-portal.
5. Configure SSL VPN firewall policy.
a. Go to Policy & Objects > Firewall Policy.
b. Fill in the firewall policy name. In this example, sslvpn tunnel access with av check.
c. Incoming interface must be SSL-VPN tunnel interface(ssl.root).
d. Choose an Outgoing Interface. In this example, port1.
e. Set the Source to all and group to sslvpngroup.
f. In this example, the Destination is all.
g. Set Schedule to always, Service to ALL, and Action to Accept.
h. Click OK.
6. Use CLI to configure SSL VPN web portal to enable the host to check for compliant antivirus software on the user’s
computer.
config vpn ssl web portal
edit my-split-tunnel-access
set host-check av
next
end
FortiOS 6.4.2 Administration Guide 1424
Fortinet Inc.
VPN
To configure SSL VPN using the CLI:
1. Configure the interface and firewall address.
config system interface
edit "wan1"
set vdom "root"
set ip 172.20.120.123 255.255.255.0
next
end
2. Configure internal interface and protected subnet, then connect the port1 interface to the internal network.
config system interface
edit "port1"
set vdom "root"
set ip 192.168.1.99 255.255.255.0
next
end
config firewall address
edit "192.168.1.0"
set subnet 192.168.1.0 255.255.255.0
next
end
3. Configure user and user group.
config user local
edit "sslvpnuser1"
set type password
set passwd your-password
next
end
config user group
edit "sslvpngroup"
set member "vpnuser1"
next
end
4. Configure SSL VPN web portal.
config vpn ssl web portal
edit "my-split-tunnel-portal"
set tunnel-mode enable
set split-tunneling enable
set split-tunneling-routing-address "192.168.1.0"
set ip-pools "SSLVPN_TUNNEL_ADDR1"
next
end
5. Configure SSL VPN settings.
config vpn ssl settings
set servercert "Fortinet_Factory"
set tunnel-ip-pools "SSLVPN_TUNNEL_ADDR1"
set tunnel-ipv6-pools "SSLVPN_TUNNEL_IPv6_ADDR1"
set source-interface "wan1"
set source-address "all"
FortiOS 6.4.2 Administration Guide 1425
Fortinet Inc.
VPN
set source-address6 "all"
set default-portal "full-access"
config authentication-rule
edit 1
set groups "sslvpngroup"
set portal "my-split-tunnel-portal"
next
end
end
6. Configure one SSL VPN firewall policy to allow remote user to access the internal network. Traffic is dropped from
internal to remote client.
config firewall policy
edit 1
set name "sslvpn web mode access"
set srcintf "ssl.root"
set dstintf "port1"
set srcaddr "all"
set dstaddr "192.168.1.0"
set groups “sslvpngroup”
set action accept
set schedule "always"
set service "ALL"
next
end
7. Configure SSL VPN web portal to enable the host to check for compliant antivirus software on the user’s computer:
config vpn ssl web portal
edit my-split-tunnel-access
set host-check av
next
end
To see the results:
1. Download FortiClient from www.forticlient.com.
2. Open the FortiClient Console and go to Remote Access.
3. Add a new connection:
l Set VPN Type to SSL VPN.
l Set Remote Gateway to the IP of the listening FortiGate interface, in this example, 172.20.120.123.
4. Select Customize Port and set it to 10443.
5. Save your settings.
6. Use the credentials you've set up to connect to the SSL VPN tunnel.
If the user's computer has antivirus software, a connection is established; otherwise FortiClient shows a compliance
warning.
7. After connection, traffic to 192.168.1.0 goes through the tunnel. Other traffic goes through local gateway.
8. On the FortiGate, go to VPN > Monitor > SSL-VPN Monitor to verify the list of SSL users.
9. On the FortiGate, go to Log & Report > Forward Traffic and view the details for the SSL entry.
FortiOS 6.4.2 Administration Guide 1426
Fortinet Inc.
VPN
SSL VPN web mode for remote user
This is a sample configuration of remote users accessing the corporate network through an SSL VPN by web mode
using a web browser.
Sample topology
Sample configuration
WAN interface is the interface connected to ISP. This example shows static mode. You can also use DHCP or PPPoE
mode. The SSL VPN connection is established over the WAN interface.
To configure SSL VPN using the GUI:
1. Configure the interface and firewall address. The port1 interface connects to the internal network.
a. Go to Network > Interfaces and edit the wan1 interface.
b. Set IP/Network Mask to 172.20.120.123/255.255.255.0.
c. Edit port1 interface and set IP/Network Mask to 192.168.1.99/255.255.255.0.
d. Click OK.
e. Go to Policy & Objects > Address and create an address for internet subnet 192.168.1.0.
2. Configure user and user group.
a. Go to User & Authentication > User Definition to create a local user sslvpnuser1.
b. Go to User & Authentication > User Groups to create a group sslvpngroup with the member sslvpnuser1.
3. Configure SSL VPN web portal.
a. Go to VPN > SSL-VPN Portals to create a web mode only portal my-web-portal.
b. Set Predefined Bookmarks for Windows server to type RDP.
4. Configure SSL VPN settings.
a. Go to VPN > SSL-VPN Settings.
b. For Listen on Interface(s), select wan1.
c. Set Listen on Port to 10443.
FortiOS 6.4.2 Administration Guide 1427
Fortinet Inc.
VPN
d. Choose a certificate for Server Certificate.
It is HIGHLY recommended that you acquire a signed certificate for you installation.
Please review the SSL VPN best practices on page 1411 and learn how to Purchase
and import a signed SSL certificate on page 827.
e. In Authentication/Portal Mapping All Other Users/Groups, set the Portal to web-access.
f. Create new Authentication/Portal Mapping for group sslvpngroup mapping portal my-Web-portal.
5. Configure SSL VPN firewall policy.
a. Go to Policy & Objects > Firewall Policy.
b. Fill in the firewall policy name. In this example, sslvpn web mode access.
c. Incoming interface must be SSL-VPN tunnel interface(ssl.root).
d. Choose an Outgoing Interface. In this example, port1.
e. Set the Source to all and group to sslvpngroup.
f. In this example, the Destination is the internal protected subnet 192.168.1.0.
g. Set Schedule to always, Service to ALL, and Action to Accept.
h. Click OK.
To configure SSL VPN using the CLI:
1. Configure the interface and firewall address.
config system interface
edit "wan1"
set vdom "root"
set ip 172.20.120.123 255.255.255.0
next
end
2. Configure the internal interface and protected subnet, then connect the port1 interface to the internal network.
config system interface
edit "port1"
set vdom "root"
set ip 192.168.1.99 255.255.255.0
next
end
config firewall address
edit "192.168.1.0"
set subnet 192.168.1.0 255.255.255.0
next
end
3. Configure user and user group.
config user local
edit "sslvpnuser1"
set type password
set passwd your-password
next
end
config user group
edit "sslvpngroup"
FortiOS 6.4.2 Administration Guide 1428
Fortinet Inc.
VPN
set member "vpnuser1"
next
end
4. Configure SSL VPN web portal and predefine RDP bookmark for windows server.
config vpn ssl web portal
edit "my-web-portal"
set web-mode enable
config bookmark-group
edit "gui-bookmarks"
config bookmarks
edit "Windows Server"
set apptype rdp
set host "192.168.1.114"
set port 3389
set logon-user "your-windows-server-user-name"
set logon-password your-windows-server-password
next
end
next
end
next
end
5. Configure SSL VPN settings.
config vpn ssl settings
set servercert "Fortinet_Factory"
set tunnel-ip-pools "SSLVPN_TUNNEL_ADDR1"
set tunnel-ipv6-pools "SSLVPN_TUNNEL_IPv6_ADDR1"
set source-interface "wan1"
set source-address "all"
set source-address6 "all"
set default-portal "full-access"
config authentication-rule
edit 1
set groups "sslvpngroup"
set portal "my-web-portal"
next
end
end
6. Configure one SSL VPN firewall policy to allow remote user to access the internal network. Traffic is dropped from
internal to remote client
config firewall policy
edit 1
set name "sslvpn web mode access"
set srcintf "ssl.root"
set dstintf "port1"
set srcaddr "all"
set dstaddr "192.168.1.0"
set groups “sslvpngroup”
set action accept
set schedule "always"
set service "ALL"
FortiOS 6.4.2 Administration Guide 1429
Fortinet Inc.
VPN
next
end
To see the results:
1. In a web browser, log into the portal https://172.20.120.123:10443 using the credentials you've set up.
2. In the portal with the predefined bookmark, select the bookmark to begin an RDP session. If there are no predefined
bookmarks, the Quick Connection tool can be used; see Quick Connection tool on page 1430 for more information.
3. Go to VPN > Monitor > SSL-VPN Monitor to verify the list of SSL users.
4. Go to Log & Report > Forward Traffic to view the details for the SSL entry.
Quick Connection tool
The Quick Connection tool allows a user to connect to a resource when it is not a predefined bookmark. The tool allows
the user to specify the type of server and the URL or IP address of the host.
To connect to a resource:
1. Select the connection type.
2. Enter the required information, such as the IP address or URL of the host.
3. Click Launch.
In a VNC session, to send Ctrl+Alt+Del, press F8 then select Send Ctrl-Alt-Delete.
RDP sessions
Some Windows servers require that a specific security be set for RDP sessions, as opposed to
the standard RDP encryption security. For example, Windows 10 requires that TLS be used.
You can specify a location option if the remote computer does not use the same keyboard layout as your computer by
appending it to the Host field using the following format: <IP address> -m <locale>
The available options are:
FortiOS 6.4.2 Administration Guide 1430
Fortinet Inc.
VPN
ar Arabic fr-be Belgian French no Norwegian
da Danish fr-ca Canadian French pl Polish
de German fr-ch Swiss French pt Portuguese
de-ch Swiss German hr Croatian pt-br Brazilian Portuguese
en-gb British English hu Hungarian ru Russian
en-uk UK English it Italian sl Slovenian
en-us US English ja Japanese sv Sudanese
es Spanish lt Lithuanian tk Turkmen
fi Finnish lv Latvian tr Turkish
fr French mk Macedonian
SSL VPN authentication
The following topics provide instructions on configuring SSL VPN authentication:
l SSL VPN with LDAP user authentication on page 1431
l SSL VPN with LDAP user password renew on page 1436
l SSL VPN with LDAP-integrated certificate authentication on page 1441
l SSL VPN for remote users with MFA and user case sensitivity on page 1447
l SSL VPN with FortiToken mobile push authentication on page 1454
l SSL VPN with RADIUS on FortiAuthenticator on page 1460
l SSL VPN with RADIUS and FortiToken mobile push on FortiAuthenticator on page 1464
l SSL VPN with RADIUS password renew on FortiAuthenticator on page 1469
l SSL VPN with RADIUS on Windows NPS on page 1473
l SSL VPN with multiple RADIUS servers on page 1478
l SSL VPN with local user password policy on page 1487
l SSL VPN with certificate authentication on page 1492
l Dynamic address support for SSL VPN policies on page 1497
l SSL VPN multi-realm on page 1506
l NAS-IP support per SSL-VPN realm on page 1511
SSL VPN with LDAP user authentication
This is a sample configuration of SSL VPN for LDAP users. In this example, the LDAP server is a Windows 2012 AD
server. A user ldu1 is configured on Windows 2012 AD server.
You must have generated and exported a CA certificate from the AD server and then have imported it as an external CA
certificate into the FortiGate.
FortiOS 6.4.2 Administration Guide 1431
Fortinet Inc.
VPN
Sample topology
Sample configuration
WAN interface is the interface connected to ISP. This example shows static mode. You can also use DHCP or PPPoE
mode. The SSL VPN connection is established over the WAN interface.
To configure SSL VPN using the GUI:
1. Configure the interface and firewall address. The port1 interface connects to the internal network:
a. Go to Network > Interfaces and edit the wan1 interface.
b. Set IP/Network Mask to 172.20.120.123/255.255.255.0.
c. Edit port1 interface and set IP/Network Mask to 192.168.1.99/255.255.255.0.
d. Click OK.
e. Go to Policy & Objects > Address and create an address for internet subnet 192.168.1.0.
2. Import CA certificate into FortiGate:
a. Go to System > Features Visibility and ensure Certificates is enabled.
b. Go to System > Certificates and select Import > CA Certificate.
c. Select Local PC and then select the certificate file.
The CA certificate now appears in the list of External CA Certificates. In this example, it is called CA_Cert_1.
d. If you want, you can use CLI commands to rename the system-generated CA_Cert_1 to be more descriptive:
config vpn certificate ca
rename CA_Cert_1 to LDAPS-CA
end
FortiOS 6.4.2 Administration Guide 1432
Fortinet Inc.
VPN
3. Configure the LDAP user:
a. Go to User & Authentication > LDAP Servers and click Create New.
b. Specify Name and Server IP/Name.
c. Specify Common Name Identifier and Distinguished Name.
d. Set Bind Type to Regular.
e. Specify Username and Password.
f. Enable Secure Connection and set Protocol to LDAPS.
g. For Certificate, select LDAP server CA LDAPS-CA from the list.
4. Configure user group:
a. Go to User & Authentication > User Groups to create a user group.
b. Enter a Name.
c. In Remote Groups, click Add to add ldaps-server.
5. Configure SSL VPN web portal:
a. Go to VPN > SSL-VPN Portals to edit the full-access portal.
This portal supports both web and tunnel mode.
b. Disable Enable Split Tunneling so that all SSL VPN traffic goes through the FortiGate.
6. Configure SSL VPN settings:
a. Go to VPN > SSL-VPN Settings.
b. Select the Listen on Interface(s), in this example, wan1.
c. Set Listen on Port to 10443.
d. Set Server Certificate to the authentication certificate.
e. Under Authentication/Portal Mapping, set default Portal web-access for All Other Users/Groups.
f. Create new Authentication/Portal Mapping for group ldaps-group mapping portal full-access.
7. Configure SSL VPN firewall policy:
a. Go to Policy & Objects > Firewall Policy.
b. Fill in the firewall policy name, in this example, sslvpn certificate auth.
c. Incoming interface must be SSL-VPN tunnel interface(ssl.root).
d. Set the Source Address to all and Source User to ldaps-group.
e. Set the Outgoing Interface to the local network interface so that the remote user can access the internal
network, in this example, port1.
f. Set Destination Address to the internal protected subnet 192.168.1.0.
g. Set Schedule to always, Service to ALL, and Action to Accept.
h. Enable NAT.
i. Configure any remaining firewall and security options as desired.
j. Click OK.
To configure SSL VPN using the CLI:
1. Configure the interface and firewall address:
config system interface
edit "wan1"
set vdom "root"
set ip 172.20.120.123 255.255.255.0
next
end
FortiOS 6.4.2 Administration Guide 1433
Fortinet Inc.
VPN
2. Configure internal interface and protected subnet, then connect the port1 interface to the internal network:
config system interface
edit "port1"
set vdom "root"
set ip 192.168.1.99 255.255.255.0
next
end
config firewall address
edit "192.168.1.0"
set subnet 192.168.1.0 255.255.255.0
next
end
3. Import CA certificate into FortiGate:
a. Go to System > Features Visibility and ensure Certificates is enabled.
b. Go to System > Certificates and select Import > CA Certificate.
c. Select Local PC and then select the certificate file.
The CA certificate now appears in the list of External CA Certificates. In the example, it is called CA_Cert_1.
d. If you want, you can use CLI commands to rename the system-generated CA_Cert_1 to be more descriptive:
config vpn certificate ca
rename CA_Cert_1 to LDAPS-CA
end
4. Configure the LDAP server:
config user ldap
edit "ldaps-server"
set server "172.20.120.161"
set cnid "cn"
set dn "cn=Users,dc=qa,dc=fortinet,dc=com"
set type regular
set username "CN=Administrator,cn=users,DC=qa,DC=fortinet,DC=com"
set password **********
set group-member-check group-object
set secure ldaps
set ca-cert "LDAPS-CA"
set port 636
next
end
5. Configure user group:
config user group
edit "ldaps-group"
set member "ldaps-server"
next
end
6. Configure SSL VPN web portal:
config vpn ssl web portal
edit "full-access"
set tunnel-mode enable
set web-mode enable
set ip-pools "SSLVPN_TUNNEL_ADDR1"
set split-tunneling disable
FortiOS 6.4.2 Administration Guide 1434
Fortinet Inc.
VPN
next
end
7. Configure SSL VPN settings:
config vpn ssl settings
set servercert "server_certificate"
set tunnel-ip-pools "SSLVPN_TUNNEL_ADDR1"
set source-interface "wan1"
set source-address "all"
set default-portal "web-access"
config authentication-rule
edit 1
set groups "ldaps-group"
set portal "full-access"
next
end
end
8. Configure one SSL VPN firewall policy to allow remote user to access the internal network:
config firewall policy
edit 1
set name "sslvpn web mode access"
set srcintf "ssl.root"
set dstintf "port1"
set srcaddr "all"
set dstaddr "192.168.1.0"
set groups “ldaps-group”
set action accept
set schedule "always"
set service "ALL"
set nat enable
next
end
To see the results of web portal:
1. From a remote device, use a web browser to log into the SSL VPN web portal http://172.20.120.123:10443.
2. Enter the ldu1 user credentials, then click Login.
3. Go to Dashboard > Network and expand the SSL-VPN widget to verify the user’s connection.
To see the results of tunnel connection:
1. Download FortiClient from www.forticlient.com.
2. Open the FortiClient Console and go to Remote Access > Configure VPN.
3. Add a new connection:
a. Set the connection name.
b. Set Remote Gateway to the IP of the listening FortiGate interface, in this example, 172.20.120.123.
c. Select Customize Port and set it to 10443.
4. Save your settings.
5. Log in using the ldu1 credentials.
FortiOS 6.4.2 Administration Guide 1435
Fortinet Inc.
VPN
To check the SSL VPN connection using the GUI:
1. Go to Dashboard > Network and expand the SSL-VPN widget to verify the user’s connection.
2. Go to Log & Report > Events and select VPN Events from the event type dropdown list to view the details of the SSL
VPN connection event log.
3. Go to Log & Report > Forward Traffic to view the details of the SSL VPN traffic.
To check the web portal login using the CLI:
# get vpn ssl monitor
SSL VPN Login Users:
Index User Auth Type Timeout From HTTP in/out HTTPS in/out
0 ldu1 1(1) 229 10.1.100.254 0/0 0/0
SSL VPN sessions:
Index User Source IP Duration I/O Bytes Tunnel/Dest IP
To check the tunnel login using the CLI:
# get vpn ssl monitor
SSL VPN Login Users:
Index User Auth Type Timeout From HTTP in/out HTTPS in/out
0 ldu1 1(1) 291 10.1.100.254 0/0 0/0
SSL VPN sessions:
Index User Source IP Duration I/O Bytes Tunnel/Dest IP
0 ldu1 10.1.100.254 9 22099/43228 10.212.134.200
SSL VPN with LDAP user password renew
This is a sample configuration of SSL VPN for LDAP users with Force Password Change on next logon. In this example,
the LDAP server is a Windows 2012 AD server. A user ldu1 is configured on Windows 2012 AD server with Force
password change on next logon.
You must have generated and exported a CA certificate from the AD server and then have imported it as an external CA
certificate into the FortiGate.
FortiOS 6.4.2 Administration Guide 1436
Fortinet Inc.
VPN
Sample topology
Sample configuration
WAN interface is the interface connected to ISP. This example shows static mode. You can also use DHCP or PPPoE
mode. The SSL VPN connection is established over the WAN interface.
To configure SSL VPN using the GUI:
1. Configure the interface and firewall address. The port1 interface connects to the internal network.
a. Go to Network > Interfaces and edit the wan1 interface.
b. Set IP/Network Mask to 172.20.120.123/255.255.255.0.
c. Edit port1 interface and set IP/Network Mask to 192.168.1.99/255.255.255.0.
d. Click OK.
e. Go to Policy & Objects > Address and create an address for internet subnet 192.168.1.0.
2. Import CA certificate into FortiGate:
a. Go to System > Features Visibility and ensure Certificates is enabled.
b. Go to System > Certificates and select Import > CA Certificate.
c. Select Local PC and then select the certificate file.
The CA certificate now appears in the list of External CA Certificates. In this example, it is called CA_Cert_1.
d. If you want, you can use CLI commands to rename the system-generated CA_Cert_1 to be more descriptive:
config vpn certificate ca
rename CA_Cert_1 to LDAPS-CA
end
FortiOS 6.4.2 Administration Guide 1437
Fortinet Inc.
VPN
3. Configure the LDAP user:
a. Go to User & Authentication > LDAP Servers and click Create New.
b. Specify Name and Server IP/Name.
c. Specify Common Name Identifier and Distinguished Name.
d. Set Bind Type to Regular.
e. Specify Username and Password.
f. Enable Secure Connection and set Protocol to LDAPS.
g. For Certificate, select LDAP server CA LDAPS-CA from the list.
h. To enable the password-renew option, use these CLI commands.
config user ldap
edit "ldaps-server"
set password-expiry-warning enable
set password-renewal enable
next
end
4. Configure user group:
a. Go to User & Authentication > User Groups to create a user group.
b. Enter a Name.
c. In Remote Groups, click Add to add ldaps-server.
5. Configure SSL VPN web portal:
a. Go to VPN > SSL-VPN Portals to edit the full-access portal.
This portal supports both web and tunnel mode.
b. Disable Enable Split Tunneling so that all SSL VPN traffic goes through the FortiGate.
6. Configure SSL VPN settings:
a. Go to VPN > SSL-VPN Settings.
b. Select the Listen on Interface(s), in this example, wan1.
c. Set Listen on Port to 10443.
d. Set Server Certificate to the authentication certificate.
e. Under Authentication/Portal Mapping, set default Portal web-access for All Other Users/Groups.
f. Create new Authentication/Portal Mapping for group ldaps-group mapping portal full-access.
7. Configure SSL VPN firewall policy:
a. Go to Policy & Objects > Firewall Policy.
b. Fill in the firewall policy name, in this example, sslvpn certificate auth.
c. Incoming interface must be SSL-VPN tunnel interface(ssl.root).
d. Set the Source Address to all and Source User to ldaps-group.
e. Set the Outgoing Interface to the local network interface so that the remote user can access the internal
network, in this example, port1.
f. Set Destination Address to the internal protected subnet 192.168.1.0.
g. Set Schedule to always, Service to ALL, and Action to Accept.
h. Enable NAT.
i. Configure any remaining firewall and security options as desired.
j. Click OK.
FortiOS 6.4.2 Administration Guide 1438
Fortinet Inc.
VPN
To configure SSL VPN using the CLI:
1. Configure the interface and firewall address:
config system interface
edit "wan1"
set vdom "root"
set ip 172.20.120.123 255.255.255.0
next
end
2. Configure internal interface and protected subnet, then connect the port1 interface to the internal network:
config system interface
edit "port1"
set vdom "root"
set ip 192.168.1.99 255.255.255.0
next
end
config firewall address
edit "192.168.1.0"
set subnet 192.168.1.0 255.255.255.0
next
end
3. Import CA certificate into FortiGate:
a. Go to System > Features Visibility and ensure Certificates is enabled.
b. Go to System > Certificates and select Import > CA Certificate.
c. Select Local PC and then select the certificate file.
The CA certificate now appears in the list of External CA Certificates. In the example, it is called CA_Cert_1.
d. If you want, you can use CLI commands to rename the system-generated CA_Cert_1 to be more descriptive:
config vpn certificate ca
rename CA_Cert_1 to LDAPS-CA
end
4. Configure the LDAP server:
config user ldap
edit "ldaps-server"
set server "172.20.120.161"
set cnid "cn"
set dn "cn=Users,dc=qa,dc=fortinet,dc=com"
set type regular
set username "CN=Administrator,cn=users,DC=qa,DC=fortinet,DC=com"
set password **********
set group-member-check group-object
set secure ldaps
set ca-cert "LDAPS-CA"
set port 636
set password-expiry-warning enable
set password-renewal enable
next
end
FortiOS 6.4.2 Administration Guide 1439
Fortinet Inc.
VPN
5. Configure user group:
config user group
edit "ldaps-group"
set member "ldaps-server"
next
end
6. Configure SSL VPN web portal:
config vpn ssl web portal
edit "full-access"
set tunnel-mode enable
set web-mode enable
set ip-pools "SSLVPN_TUNNEL_ADDR1"
set split-tunneling disable
next
end
7. Configure SSL VPN settings:
config vpn ssl settings
set servercert "server_certificate"
set tunnel-ip-pools "SSLVPN_TUNNEL_ADDR1"
set source-interface "wan1"
set source-address "all"
set default-portal "web-access"
config authentication-rule
edit 1
set groups "ldaps-group"
set portal "full-access"
next
end
end
8. Configure one SSL VPN firewall policy to allow remote user to access the internal network:
config firewall policy
edit 1
set name "sslvpn web mode access"
set srcintf "ssl.root"
set dstintf "port1"
set srcaddr "all"
set dstaddr "192.168.1.0"
set groups “ldaps-group”
set action accept
set schedule "always"
set service "ALL"
set nat enable
next
end
To see the results of web portal:
1. From a remote device, use a web browser to log into the SSL VPN web portal http://172.20.120.123:10443.
2. Log in using the ldu1 credentials.
Use a user which is configured on FortiAuthenticator with Force password change on next logon.
FortiOS 6.4.2 Administration Guide 1440
Fortinet Inc.
VPN
3. Click Login. You are prompted to enter a new password.
4. Go to Dashboard > Network and expand the SSL-VPN widget to verify the user’s connection.
To see the results of tunnel connection:
1. Download FortiClient from www.forticlient.com.
2. Open the FortiClient Console and go to Remote Access > Configure VPN.
3. Add a new connection:
a. Set the connection name.
b. Set Remote Gateway to the IP of the listening FortiGate interface, in this example, 172.20.120.123.
c. Select Customize Port and set it to 10443.
4. Save your settings.
5. Log in using the ldu1 credentials.
You are prompted to enter a new password.
To check the SSL VPN connection using the GUI:
1. Go to Dashboard > Network and expand the SSL-VPN widget to verify the user’s connection.
2. Go to Log & Report > Events and select VPN Events from the event type dropdown list to view the details of the SSL
VPN connection event log.
3. Go to Log & Report > Forward Traffic to view the details of the SSL VPN traffic.
To check the web portal login using the CLI:
# get vpn ssl monitor
SSL VPN Login Users:
Index User Auth Type Timeout From HTTP in/out HTTPS in/out
0 ldu1 1(1) 229 10.1.100.254 0/0 0/0
SSL VPN sessions:
Index User Source IP Duration I/O Bytes Tunnel/Dest IP
To check the tunnel login using the CLI:
# get vpn ssl monitor
SSL VPN Login Users:
Index User Auth Type Timeout From HTTP in/out HTTPS in/out
0 ldu1 1(1) 291 10.1.100.254 0/0 0/0
SSL VPN sessions:
Index User Source IP Duration I/O Bytes Tunnel/Dest IP
0 ldu1 10.1.100.254 9 22099/43228 10.212.134.200
SSL VPN with LDAP-integrated certificate authentication
This is a sample configuration of SSL VPN that requires users to authenticate using a certificate with LDAP
UserPrincipalName checking.
This sample uses Windows 2012R2 Active Directory acting as both the user certificate issuer, the certificate authority,
and the LDAP server.
FortiOS 6.4.2 Administration Guide 1441
Fortinet Inc.
VPN
Sample topology
Sample configuration
WAN interface is the interface connected to ISP. This example shows static mode. You can also use DHCP or PPPoE
mode. The SSL VPN connection is established over the WAN interface.
In this sample, the User Principal Name is included in the subject name of the issued certificate. This is the user field we
use to search LDAP in the connection attempt.
To use the user certificate, you must first install it on the user’s PC. When the user tries to authenticate, the user
certificate is checked against the CA certificate to verify that they match.
Every user should have a unique user certificate. This allows you to distinguish each user and revoke a specific user’s
certificate, such as if a user no longer has VPN access.
To install the server certificate:
The server certificate is used for authentication and for encrypting SSL VPN traffic.
1. Go to System > Feature Visibility and ensure Certificates is enabled.
2. Go to System > Certificates and select Import > Local Certificate.
3. Set Type to Certificate.
4. Choose the Certificate file and the Key file for your certificate, and enter the Password.
5. If required, change the Certificate Name.
The server certificate now appears in the list of Certificates.
FortiOS 6.4.2 Administration Guide 1442
Fortinet Inc.
VPN
To install the CA certificate:
The CA certificate is the certificate that signed both the server certificate and the user certificate. In this example, it is
used to authenticate SSL VPN users.
1. Go to System > Certificates and select Import > CA Certificate.
2. Select Local PC and then select the certificate file.
The CA certificate now appears in the list of External CA Certificates. In this example, it is called CA_Cert_1.
To configure SSL VPN using the GUI:
1. Configure the interface and firewall address. The port1 interface connects to the internal network.
a. Go to Network > Interfaces and edit the wan1 interface.
b. Set IP/Network Mask to 172.20.120.123/255.255.255.0.
c. Edit port1 interface and set IP/Network Mask to 192.168.1.99/255.255.255.0.
d. Click OK.
e. Go to Policy & Objects > Address and create an address for internet subnet 192.168.1.0.
2. Configure the LDAP server:
a. Go to User & Authentication > LDAP Servers and click Create New.
b. Specify Name and Server IP/Name.
c. Set Distinguished Name to dc=fortinet-fsso,dc=com.
d. Set Bind Type to Regular.
e. Set Username to cn=admin,ou=testing,dc=fortinet-fsso,dc=com.
f. Set Password.
g. Click OK.
3. Configure PKI users and a user group:
To use certificate authentication, use the CLI to create PKI users.
config user peer
edit user1
set ca CA_Cert_1
set ldap-server "ldap-AD"
set ldap-mode principal-name
next
end
When you have create a PKI user, a new menu is added to the GUI:
a. Go to User & Authentication > PKI to see the new user.
b. Go to User & Authentication > User > User Groups and create a group sslvpn-group.
c. Add the PKI peer object you created as a local member of the group.
d. Add a remote group on the LDAP server and select the group of interest.
You need these users to be members using the LDAP browser window.
4. Configure SSL VPN web portal:
a. Go to VPN > SSL-VPN Portals to edit the full-access portal.
This portal supports both web and tunnel mode.
b. Disable Enable Split Tunneling so that all SSL VPN traffic goes through the FortiGate.
5. Configure SSL VPN settings:
a. Go to VPN > SSL-VPN Settings.
b. Select the Listen on Interface(s), in this example, wan1.
FortiOS 6.4.2 Administration Guide 1443
Fortinet Inc.
VPN
c. Set Listen on Port to 10443.
d. Set Server Certificate to the authentication certificate.
e. Enable Require Client Certificate.
f. Under Authentication/Portal Mapping, set default Portal web-access for All Other Users/Groups.
g. Create new Authentication/Portal Mapping for group sslvpn-group mapping portal full-access.
6. Configure SSL VPN firewall policy:
a. Go to Policy & Objects > Firewall Policy.
b. Fill in the firewall policy name. In this example, sslvpn certificate auth.
c. Incoming interface must be SSL-VPN tunnel interface(ssl.root).
d. Set the Source Address to all and Source User to sslvpn-group.
e. Set the Outgoing Interface to the local network interface so that the remote user can access the internal
network. In this example, port1.
f. Set Destination Address to the internal protected subnet 192.168.1.0.
g. Set Schedule to always, Service to ALL, and Action to Accept.
h. Enable NAT.
i. Configure any remaining firewall and security options as desired.
j. Click OK.
To configure SSL VPN using the CLI:
1. Configure the interface and firewall address:
config system interface
edit "wan1"
set vdom "root"
set ip 172.20.120.123 255.255.255.0
next
end
2. Configure internal interface and protected subnet, then connect the port1 interface to the internal network:
config system interface
edit "port1"
set vdom "root"
set ip 192.168.1.99 255.255.255.0
next
end
config firewall address
edit "192.168.1.0"
set subnet 192.168.1.0 255.255.255.0
next
end
3. Configure the LDAP server:
config user ldap
edit "ldap-AD"
set server "172.18.60.206"
set cnid "cn"
set dn "dc=fortinet-fsso,dc=com"
set type regular
set username "cn=admin,ou=testing,dc=fortinet-fsso,dc=com"
set password ldap-server-password
FortiOS 6.4.2 Administration Guide 1444
Fortinet Inc.
VPN
next
end
4. Configure PKI users and a user group:
config user peer
edit user1
set ca CA_Cert_1
set ldap-server "ldap-AD"
set ldap-mode principal-name
next
end
config user group
edit "sslvpn-group"
set member "ldap-AD" "user1"
config match
edit 1
set server-name "ldap-AD"
set group-name "CN=group3,OU=Testing,DC=Fortinet-FSSO,DC=COM"
next
end
next
end
5. Configure SSL VPN web portal:
config vpn ssl web portal
edit "full-access"
set tunnel-mode enable
set web-mode enable
set ip-pools "SSLVPN_TUNNEL_ADDR1"
set split-tunneling disable
next
end
6. Configure SSL VPN settings:
config vpn ssl settings
set servercert "server_certificate"
set tunnel-ip-pools "SSLVPN_TUNNEL_ADDR1"
set source-interface "wan1"
set source-address "all"
set default-portal "web-access"
set reqclientcert enable
config authentication-rule
edit 1
set groups "sslvpn-group"
set portal "full-access"
next
end
end
7. Configure one SSL VPN firewall policy to allow remote user to access the internal network:
config firewall policy
edit 1
set name "sslvpn web mode access"
set srcintf "ssl.root"
FortiOS 6.4.2 Administration Guide 1445
Fortinet Inc.
VPN
set dstintf "port1"
set srcaddr "all"
set dstaddr "192.168.1.0"
set groups “sslvpn-group”
set action accept
set schedule "always"
set service "ALL"
set nat enable
next
end
To see the results of tunnel connection:
1. Download FortiClient from www.forticlient.com.
2. Open the FortiClient Console and go to Remote Access > Configure VPN.
3. Add a new connection.
a. Set the connection name.
b. Set Remote Gateway to the IP of the listening FortiGate interface, in this example, 172.20.120.123.
c. Select Customize Port and set it to 10443.
d. Enable Client Certificate and select the authentication certificate.
4. Save your settings.
Connecting to the VPN only requires the user's certificate. It does not require username or password.
To see the results of web portal:
1. In a web browser, log into the portal http://172.20.120.123:10443.
A message requests a certificate for authentication.
2. Select the user certificate.
You can connect to the SSL VPN web portal.
To check the SSL VPN connection using the GUI:
1. Go to Dashboard > Network and expand the SSL-VPN widget to verify the user’s connection.
2. Go to Log & Report > VPN Events to view the details of the SSL VPN connection event log.
3. Go to Log & Report > Forward Traffic to view the details of the SSL VPN traffic.
To check the SSL VPN connection using the CLI:
Below is a sample output of diagnose debug application fnbamd -1 while the user connects. This is a
shortened output sample of a few locations to show the important parts. This sample shows lookups to find the group
memberships (three groups total) of the user and that the correct group being found results in a match.
[1148] fnbamd_ldap_recv-Response len: 16, svr: 172.18.60.206
[829] fnbamd_ldap_parse_response-Got one MESSAGE. ID:4, type:search-result
[864] fnbamd_ldap_parse_response-ret=0
[1386] __fnbamd_ldap_primary_grp_next-Auth accepted
[910] __ldap_rxtx-Change state to 'Done'
[843] __ldap_rxtx-state 23(Done)
[925] fnbamd_ldap_send-sending 7 bytes to 172.18.60.206
[937] fnbamd_ldap_send-Request is sent. ID 5
[753] __ldap_stop-svr 'ldap-AD'
[53] ldap_dn_list_del_all-Del CN=test3,OU=Testing,DC=Fortinet-FSSO,DC=COM
FortiOS 6.4.2 Administration Guide 1446
Fortinet Inc.
VPN
[399] ldap_copy_grp_list-copied CN=group3,OU=Testing,DC=Fortinet-FSSO,DC=COM
[399] ldap_copy_grp_list-copied CN=Domain Users,CN=Users,DC=Fortinet-FSSO,DC=COM
[2088] fnbamd_auth_cert_check-Matching group 'sslvpn-group'
[2007] __match_ldap_group-Matching server 'ldap-AD' - 'ldap-AD'
[2015] __match_ldap_group-Matching group 'CN=group3,OU=Testing,DC=Fortinet-FSSO,DC=COM' -
'CN=group3,OU=Testing,DC=Fortinet-FSSO,DC=COM'
[2091] fnbamd_auth_cert_check-Group 'sslvpn-group' matched
[2120] fnbamd_auth_cert_result-Result for ldap svr[0] 'ldap-AD' is SUCCESS
[2126] fnbamd_auth_cert_result-matched user 'test3', matched group 'sslvpn-group'
You can also use diagnose firewall auth list to validate that a firewall user entry exists for the SSL VPN user
and is part of the right groups.
SSL VPN for remote users with MFA and user case sensitivity
By default, remote LDAP and RADIUS user names are case sensitive. When a remote user object is applied to SSL VPN
authentication, the user must type the exact case that is used in the user definition on the FortiGate.
Case sensitivity can be disabled by disabling the username-case-sensitivity CLI command, allowing the remote
user object to match any case that the end user types in.
In this example, a remote user is configured with multi-factor authentication (MFA). The user group includes the LDAP
user and server, and is applied to SSL VPN authentication and the policy.
Topology
FortiOS 6.4.2 Administration Guide 1447
Fortinet Inc.
VPN
Example configuration
To configure the LDAP server:
1. Generate and export a CA certificate from the AD server .
2. Import the CA certificate into FortiGate:
a. Go to System > Features Visibility and ensure Certificates is enabled.
b. Go to System > Certificates and select Import > CA Certificate.
c. Select Local PC and then select the certificate file.
The CA certificate now appears in the list of External CA Certificates. In this example, it is called CA_Cert_1.
d. If you want, you can use CLI commands to rename the system-generated CA_Cert_1 to be more descriptive:
config vpn certificate ca
rename CA_Cert_1 to LDAPS-CA
end
3. Configure the LDAP user:
a. Go to User & Authentication > LDAP Servers and click Create New.
b. Configure the following options for this example:
Name WIN2K16-KLHOME
Server IP/Name 192.168.20.6
Server Port 636
Common Name Identifier sAMAccountName
Distinguished Name dc=KLHOME,dc=local
Bind Type Regular
Username KLHOME\\Administrator
Password *********
Secure Connection Enable
Protocol LDAPS
Certificate CA_Cert_1
This is the CA certificate that you imported in step 2.
FortiOS 6.4.2 Administration Guide 1448
Fortinet Inc.
VPN
c. Click OK.
To configure an LDAP user with MFA:
1. Go to User & Authentication > User Definition and click Create New.
2. Select Remote LDAP User, then click Next.
3. Select the just created LDAP server, then click Next.
4. Right click to add the selected user, then click Submit.
5. Edit the user that you just created.
The username will be pulled from the LDAP server with the same case as it has on the server.
6. Set the Email Address to the address that FortiGate will send the FortiToken to.
7. Enable Two-factor Authentication.
8. Set Authentication Type to FortiToken.
9. Set Token to a FortiToken device. See for more information.
10. Click OK.
To disable case sensitivity on the remote user:
This can only be configured in the CLI.
config user local
edit "fgdocs"
set type ldap
set two-factor fortitoken
set fortitoken "FTKMOBxxxxxxxxxx"
set email-to "[email protected]"
set username-case-sensitivity disable
set ldap-server "WIN2K16-KLHOME"
next
end
To configure a user group with the remote user and the LDAP server:
1. Go to User & Authentication > User Groups and click Create New.
2. Set the Name to LDAP-USERGRP.
FortiOS 6.4.2 Administration Guide 1449
Fortinet Inc.
VPN
3. Set Members to the just created remote user.
4. In the Remote Groups table, click Add:
a. Set Remote Server to the LDAP server.
b. Set the group or groups that apply, and right click to add them.
c. Click OK.
5. Click OK.
To apply the user group to the SSL VPN portal:
1. Go to VPN > SSL-VPN Settings.
2. In the Authentication/Portal Mapping table, click Create New.
a. Set Users/Groups to the just created user group.
b. Configure the remaining settings as required.
c. Click OK.
3. Click Apply.
To apply the user group to a firewall policy:
1. Go to Policy & Objects > Firewall Policy and click Create New.
2. Configure the following:
Name SSLVPNtoInteral
Incoming Interface SSL-VPN tunnel interface (ssl.root)
Outgoing Interface port3
Source Address - SSLVPN_TUNNEL_ADDR1
User - LDAP-USERGRP
FortiOS 6.4.2 Administration Guide 1450
Fortinet Inc.
VPN
Destination The address of the internal network.
In this case: 192.168.20.0.
Schedule always
Service ALL
Action ACCEPT
NAT Enabled
3. Configuring the remaining settings as required.
4. Click OK.
To configure this example in the CLI:
1. Configure the LDAP server:
config user ldap
edit "WIN2K16-KLHOME"
set server "192.168.20.6"
set cnid "sAMAccountName"
set dn "dc=KLHOME,dc=local"
set type regular
set username "KLHOME\\Administrator"
set password *********
set secure ldaps
set ca-cert "CA_Cert_1"
set port 636
next
end
2. Configure an LDAP user with MFA:
config user local
edit "fgdocs"
set type ldap
set two-factor fortitoken
set fortitoken "FTKMOBxxxxxxxxxx"
set email-to "[email protected]"
FortiOS 6.4.2 Administration Guide 1451
Fortinet Inc.
VPN
set username-case-sensitivity disable
set ldap-server "WIN2K16-KLHOME"
next
end
3. Disable case sensitivity on the remote user:
config user local
edit "fgdocs"
set type ldap
set two-factor fortitoken
set fortitoken "FTKMOBxxxxxxxxxx"
set email-to "[email protected]"
set username-case-sensitivity disable
set ldap-server "WIN2K16-KLHOME"
next
end
4. Configure a user group with the remote user and the LDAP server:
config user group
edit "LDAP-USERGRP"
set member "fgdocs" "WIN2K16-KLHOME"
next
end
5. Apply the user group to the SSL VPN portal:
config vpn ssl settings
set servercert <server certificate>
set tunnel-ip-pools "SSLVPN_TUNNEL_ADDR1"
set source-interface "port1"
set source-address "all"
set default-portal "web-access"
config authentication-rule
edit 1
set groups "LDAP-USERGRP"
set portal "full-access"
next
end
end
6. Apply the user group to a firewall policy:
config firewall policy
edit 5
set name "SSLVPNtoInternal"
set srcintf "ssl.root"
set dstintf "port3"
set srcaddr "SSLVPN_TUNNEL_ADDR1"
set dstaddr "192.168.20.0"
set action accept
set schedule "always"
set service "ALL"
set groups "LDAP-USERGRP"
set nat enable
next
end
FortiOS 6.4.2 Administration Guide 1452
Fortinet Inc.
VPN
Verification
To setup the VPN connection:
1. Download FortiClient from www.forticlient.com.
2. Open the FortiClient Console and go to Remote Access.
3. Add a new connection:
a. Set the connection name.
b. Set Remote Gateway to the IP of the listening FortiGate interface.
c. If required, set the Customize Port.
4. Save your settings.
To test the connection with case sensitivity disabled:
1. Connect to the VPN:
a. Log in to the tunnel with the username, using the same case that it is on the FortiGate.
b. When prompted, enter your FortiToken code.
You should now be connected.
2. Check the web portal log in using the CLI:
# get vpn ssl monitor
SSL VPN Login Users:
Index User Group Auth Type Timeout From HTTP in/out HTTPS
in/out
0 fgdocs LDAP-USERGRP 16(1) 289 192.168.2.202 0/0
0/0
SSL VPN sessions:
Index User Group Source IP Duration I/O Bytes Tunnel/Dest IP
0 fgdocs LDAP-USERGRP 192.168.2.202 45 99883/5572
10.212.134.200
3. Disconnect from the VPN connection.
4. Reconnect to the VPN:
a. Log in to the tunnel with the username, using a different case than on the FortiGate.
b. When prompted, enter your FortiToken code.
You should now be connected.
5. Check the web portal log in using the CLI:
# get vpn ssl monitor
SSL VPN Login Users:
Index User Group Auth Type Timeout From HTTP in/out HTTPS
in/out
0 FGDOCS LDAP-USERGRP 16(1) 289 192.168.2.202 0/0
0/0
SSL VPN sessions:
Index User Group Source IP Duration I/O Bytes Tunnel/Dest IP
0 FGDOCS LDAP-USERGRP 192.168.2.202 45 99883/5572
10.212.134.200
In both cases, the remote user is matched against the remote LDAP user object and prompted for multi-factor
authentication.
FortiOS 6.4.2 Administration Guide 1453
Fortinet Inc.
VPN
To test the connection with case sensitivity enabled:
1. Enable case sensitivity for the user:
config user local
edit "fgdocs"
set username-case-sensitivity enable
next
end
2. Connect to the VPN
a. Log in to the tunnel with the username, using the same case that it is on the FortiGate.
b. When prompted, enter your FortiToken code.
You should now be connected.
3. Check the web portal log in using the CLI:
# get vpn ssl monitor
SSL VPN Login Users:
Index User Group Auth Type Timeout From HTTP in/out HTTPS
in/out
0 fgdocs LDAP-USERGRP 16(1) 289 192.168.2.202 0/0
0/0
SSL VPN sessions:
Index User Group Source IP Duration I/O Bytes Tunnel/Dest IP
0 fgdocs LDAP-USERGRP 192.168.2.202 45 99883/5572
10.212.134.200
1. Disconnect from the VPN connection.
2. Reconnect to the VPN:
a. Log in to the tunnel with the username, using a different case than on the FortiGate.
You will not be prompted for your FortiToken code. You should now be connected.
3. Check the web portal log in using the CLI:
# get vpn ssl monitor
SSL VPN Login Users:
Index User Group Auth Type Timeout From HTTP in/out HTTPS
in/out
0 FGdocs LDAP-USERGRP 16(1) 289 192.168.2.202 0/0
0/0
SSL VPN sessions:
Index User Group Source IP Duration I/O Bytes Tunnel/Dest IP
0 FGdocs LDAP-USERGRP 192.168.2.202 45 99883/5572
10.212.134.200
In this case, the user is allowed to log in without a FortiToken code because the entered user name did not match the
name defined on the remote LDAP user object. Authentication continues to be evaluated against the LDAP server
though, which is not case sensitive.
SSL VPN with FortiToken mobile push authentication
This is a sample configuration of SSL VPN that uses FortiToken mobile push two-factor authentication. If you enable
push notifications, users can accept or deny the authentication request.
FortiOS 6.4.2 Administration Guide 1454
Fortinet Inc.
VPN
Sample topology
Sample configuration
WAN interface is the interface connected to ISP. This example shows static mode. You can also use DHCP or PPPoE
mode. The SSL VPN connection is established over the WAN interface.
To configure SSL VPN using the GUI:
1. Configure the interface and firewall address. The port1 interface connects to the internal network.
a. Go to Network > Interfaces and edit the wan1 interface.
b. Set IP/Network Mask to 172.20.120.123/255.255.255.0.
c. Edit port1 interface and set IP/Network Mask to 192.168.1.99/255.255.255.0.
d. Click OK.
e. Go to Policy & Objects > Address and create an address for internet subnet 192.168.1.0.
2. Register FortiGate for FortiCare Support:
To add or download a mobile token on FortiGate, FortiGate must be registered for FortiCare Support. If your
FortiGate is registered, skip this step.
a. Go to Dashboard > Licenses.
b. Hover the pointer on FortiCare Support to check if FortiCare registered. If not, click it and select Register.
3. Add FortiToken mobile to FortiGate:
If your FortiGate has FortiToken installed, skip this step.
a. Go to User & Authentication > FortiTokens and click Create New.
b. Select Mobile Token and type in Activation Code.
c. Every FortiGate has two free mobile tokens. Go to User & Authentication > FortiTokens and click Import Free
Trial Tokens.
4. Enable FortiToken mobile push:
To use FTM-push authentication, use CLI to enable FTM-Push on the FortiGate.
FortiOS 6.4.2 Administration Guide 1455
Fortinet Inc.
VPN
a. Ensure server-ip is reachable from the Internet and enter the following CLI commands:
config system ftm-push
set server-ip 172.20.120.123
set status enable
end
b. Go to Network > Interfaces.
c. Edit the wan1 interface.
d. Under Administrative Access > IPv4, select FTM.
e. Click OK.
5. Configure user and user group:
a. Go to User & Authentication > User Definition to create a local user sslvpnuser1.
b. Enter the user's Email Address.
c. Enable Two-factor Authentication and select one mobile Token from the list,
d. Enable Send Activation Code and select Email.
e. Click Next and click Submit.
f. Go to User & Authentication > User Groups to create a group sslvpngroup with the member sslvpnuser1.
6. Activate the mobile token:
a. When the user sslvpnuser1 is created, an email is sent to the user's email address. Follow the instructions to
install your FortiToken mobile application on your device and activate your token.
7. Configure SSL VPN web portal:
a. Go to VPN > SSL-VPN Portals to edit the full-access portal.
This portal supports both web and tunnel mode.
b. Disable Enable Split Tunneling so that all SSL VPN traffic goes through the FortiGate.
8. Configure SSL VPN settings:
a. Go to VPN > SSL-VPN Settings.
b. Select the Listen on Interface(s), in this example, wan1.
c. Set Listen on Port to 10443.
d. Set Server Certificate to the authentication certificate.
e. Under Authentication/Portal Mapping, set default Portal web-access for All Other Users/Groups.
f. Create new Authentication/Portal Mapping for group sslvpngroup mapping portal full-access.
9. Configure SSL VPN firewall policy:
a. Go to Policy & Objects > Firewall Policy.
b. Fill in the firewall policy name. In this example, sslvpn certificate auth.
c. Incoming interface must be SSL-VPN tunnel interface(ssl.root).
d. Set the Source Address to all and Source User to sslvpngroup.
e. Set the Outgoing Interface to the local network interface so that the remote user can access the internal
network. In this example, port1.
f. Set Destination Address to the internal protected subnet 192.168.1.0.
g. Set Schedule to always, Service to ALL, and Action to Accept.
h. Enable NAT.
i. Configure any remaining firewall and security options as desired.
j. Click OK.
FortiOS 6.4.2 Administration Guide 1456
Fortinet Inc.
VPN
To configure SSL VPN using the CLI:
1. Configure the interface and firewall address.
config system interface
edit "wan1"
set vdom "root"
set ip 172.20.120.123 255.255.255.0
next
end
2. Configure internal interface and protected subnet, then connect the port1 interface to the internal network.
config system interface
edit "port1"
set vdom "root"
set ip 192.168.1.99 255.255.255.0
next
end
config firewall address
edit "192.168.1.0"
set subnet 192.168.1.0 255.255.255.0
next
end
3. Register FortiGate for FortiCare Support.
To add or download a mobile token on FortiGate, FortiGate must be registered for FortiCare Support. If your
FortiGate is registered, skip this step.
diagnose forticare direct-registration product-registration -a "your [email protected]" -p
"your password" -T "Your Country/Region" -R "Your Reseller" -e 1
4. Add FortiToken mobile to FortiGate:
execute fortitoken-mobile import <your FTM code>
If your FortiGate has FortiToken installed, skip this step.
Every FortiGate has two free mobile Tokens. You can download the free token.
execute fortitoken-mobile import 0000-0000-0000-0000-0000
5. Enable FortiToken mobile push:
a. To use FTM-push authentication, ensure server-ip is reachable from the Internet and enable FTM-push in
the FortiGate:
config system ftm-push
set server-ip 172.20.120.123
set status enable
end
b. Enable FTM service on WAN interface:
config system interface
edit "wan1"
append allowaccess ftm
next
end
FortiOS 6.4.2 Administration Guide 1457
Fortinet Inc.
VPN
6. Configure user and user group:
config user local
edit "sslvpnuser1"
set type password
set two-factor fortitoken
set fortitoken <select mobile token for the option list>
set email-to <user's email address>
set passwd <user's password>
next
end
config user group
edit "sslvpngroup"
set member "sslvpnuser1"
next
end
7. Activate the mobile token.
When the user sslvpnuser1 is created, an email is sent to the user's email address. Follow the instructions to install
your FortiToken mobile application on your device and activate your token.
8. Configure SSL VPN web portal:
config vpn ssl web portal
edit "full-access"
set tunnel-mode enable
set web-mode enable
set ip-pools "SSLVPN_TUNNEL_ADDR1"
set split-tunneling disable
next
end
9. Configure SSL VPN settings:
config vpn ssl settings
set servercert "server_certificate"
set tunnel-ip-pools "SSLVPN_TUNNEL_ADDR1"
set source-interface "wan1"
set source-address "all"
set default-portal "web-access"
config authentication-rule
edit 1
set groups "sslvpngroup"
set portal "full-access"
next
end
end
10. Configure one SSL VPN firewall policy to allow remote user to access the internal network:
config firewall policy
edit 1
set name "sslvpn web mode access"
set srcintf "ssl.root"
set dstintf "port1"
set srcaddr "all"
set dstaddr "192.168.1.0"
set groups “sslvpngroup”
set action accept
FortiOS 6.4.2 Administration Guide 1458
Fortinet Inc.
VPN
set schedule "always"
set service "ALL"
set nat enable
next
end
To see the results of web portal:
1. From a remote device, use a web browser to log into the SSL VPN web portal http://172.20.120.123:10443.
2. Log in using the sslvpnuser1 credentials.
The FortiGate pushes a login request notification through the FortiToken mobile application.
3. Check your mobile device and select Approve.
When the authentication is approved, sslvpnuser1 is logged into the SSL VPN portal.
4. On the FortiGate, go to Dashboard > Network and expand the SSL-VPN widget to verify the user’s connection.
To see the results of tunnel connection:
1. Download FortiClient from www.forticlient.com.
2. Open the FortiClient Console and go to Remote Access > Configure VPN.
3. Add a new connection:
a. Set the connection name.
b. Set Remote Gateway to the IP of the listening FortiGate interface, in this example, 172.20.120.123.
c. Select Customize Port and set it to 10443.
4. Save your settings.
5. Log in using the sslvpnuser1 credentials and click FTM Push.
The FortiGate pushes a login request notification through the FortiToken mobile application.
6. Check your mobile device and select Approve.
When the authentication is approved, sslvpnuser1 is logged into the SSL VPN tunnel.
To check the SSL VPN connection using the GUI:
1. Go to Dashboard > Network and expand the SSL-VPN widget to verify the user’s connection.
2. Go to Log & Report > Forward Traffic to view the details of the SSL VPN traffic.
To check the web portal login using the CLI:
get vpn ssl monitor
SSL VPN Login Users:
Index User Auth Type Timeout From HTTP in/out HTTPS in/out
0 sslvpnuser1 1(1) 229 10.1.100.254 0/0 0/0
SSL VPN sessions:
Index User Source IP Duration I/O Bytes Tunnel/Dest IP
To check the tunnel login using the CLI:
get vpn ssl monitor
SSL VPN Login Users:
Index User Auth Type Timeout From HTTP in/out HTTPS in/out
0 sslvpnuser1 1(1) 291 10.1.100.254 0/0 0/0
FortiOS 6.4.2 Administration Guide 1459
Fortinet Inc.
VPN
SSL VPN sessions:
Index User Source IP Duration I/O Bytes Tunnel/Dest IP
0 sslvpnuser1 10.1.100.254 9 22099/43228 10.212.134.200
SSL VPN with RADIUS on FortiAuthenticator
This is a sample configuration of SSL VPN that uses FortiAuthenticator as a RADIUS authentication server.
Sample topology
Sample configuration
WAN interface is the interface connected to ISP. This example shows static mode. You can also use DHCP or PPPoE
mode. The SSL VPN connection is established over the WAN interface.
To configure FortiAuthenticator using the GUI:
1. Create a user on the FortiAuthenticator.
a. On the FortiAuthenticator, go to Authentication > User Management > Local Users to create a user
sslvpnuser1.
b. Enable Allow RADIUS authentication and click OK to access additional settings.
c. Go to Authentication > User Management > User Groups to create a group sslvpngroup.
d. Add sslvpnuser1 to the group by moving the user from Available users to Selected users.
2. Create the RADIUS client (FortiGate) on the FortiAuthenticator.
a. On the FortiAuthenticator, go to Authentication > RADIUS Service > Clients to add the FortiGate as a RADIUS
client OfficeServer).
b. Enter the FortiGate IP address and set a Secret.
The secret is a pre-shared secure password that the FortiGate uses to authenticate to the FortiAuthenticator.
c. Set Realms to local | Local users.
FortiOS 6.4.2 Administration Guide 1460
Fortinet Inc.
VPN
To configure SSL VPN using the GUI:
1. Configure the interface and firewall address. The port1 interface connects to the internal network.
a. Go to Network > Interfaces and edit the wan1 interface.
b. Set IP/Network Mask to 172.20.120.123/255.255.255.0.
c. Edit port1 interface and set IP/Network Mask to 192.168.1.99/255.255.255.0.
d. Click OK.
e. Go to Policy & Objects > Addresses and create an address for internal subnet 192.168.1.0.
2. Create a RADIUS user and user group .
a. On the FortiGate, go to User & Authentication > RADIUS Servers to create a user to connect to the RADIUS
server (FortiAuthenticator).
b. For Name, use FAC-RADIUS.
c. Enter the IP address of the FortiAuthenticator, and enter the Secret created above.
d. Click Test Connectivity to ensure you can connect to the RADIUS server.
e. Select Test User Credentials and enter the credentials for sslvpnuser1.
The FortiGate can now connect to the FortiAuthenticator as the RADIUS client.
f. Go to User & Authentication > User Groups and click Create New to map authenticated remote users to a user
group on the FortiGate.
g. For Name, use SSLVPNGroup.
h. In Remote Groups, click Add.
i. In the Remote Server dropdown list, select FAC-RADIUS.
j. Leave the Groups field blank.
3. Configure SSL VPN web portal.
a. Go to VPN > SSL-VPN Portals to edit the full-access portal.
This portal supports both web and tunnel mode.
b. Disable Enable Split Tunneling so that all SSL VPN traffic goes through the FortiGate.
4. Configure SSL VPN settings.
a. Go to VPN > SSL-VPN Settings.
b. Select the Listen on Interface(s), in this example, wan1.
c. Set Listen on Port to 10443.
d. Set Server Certificate to the authentication certificate.
e. Under Authentication/Portal Mapping, set default Portal web-access for All Other Users/Groups.
f. Create new Authentication/Portal Mapping for group sslvpngroup mapping portal full-access.
5. Configure SSL VPN firewall policy.
a. Go to Policy & Objects > Firewall Policy.
b. Fill in the firewall policy name. In this example, sslvpn certificate auth.
c. Incoming Interface must be SSL-VPN tunnel interface(ssl.root).
d. Set the Outgoing Interface to the local network interface so that the remote user can access the internal
network. In this example: port1.
e. Set the Source > Address to all and Source > User to sslvpngroup.
f. Set Destination > Address to the internal protected subnet 192.168.1.0.
g. Set Schedule to always, Service to ALL, and Action to Accept.
h. Enable NAT.
i. Configure the remaining options as required.
j. Click OK.
FortiOS 6.4.2 Administration Guide 1461
Fortinet Inc.
VPN
To configure SSL VPN using the CLI:
1. Configure the interface and firewall address.
config system interface
edit "wan1"
set vdom "root"
set ip 172.20.120.123 255.255.255.0
next
end
2. Configure internal interface and protected subnet, then connect the port1 interface to the internal network.
config system interface
edit "port1"
set vdom "root"
set ip 192.168.1.99 255.255.255.0
next
end
config firewall address
edit "192.168.1.0"
set subnet 192.168.1.0 255.255.255.0
next
end
3. Create a RADIUS user and user group.
config user radius
edit "FAC-RADIUS"
set server "172.20.120.161"
set secret <FAC client secret>
next
end
config user group
edit "sslvpngroup"
set member "FAC-RADIUS"
next
end
4. Configure SSL VPN web portal.
config vpn ssl web portal
edit "full-access"
set tunnel-mode enable
set web-mode enable
set ip-pools "SSLVPN_TUNNEL_ADDR1"
set split-tunneling disable
next
end
5. Configure SSL VPN settings.
config vpn ssl settings
set servercert "server_certificate"
set tunnel-ip-pools "SSLVPN_TUNNEL_ADDR1"
set source-interface "wan1"
set source-address "all"
set default-portal "web-access"
FortiOS 6.4.2 Administration Guide 1462
Fortinet Inc.
VPN
config authentication-rule
edit 1
set groups "sslvpngroup"
set portal "full-access"
next
end
end
6. Configure one SSL VPN firewall policy to allow remote user to access the internal network.
config firewall policy
edit 1
set name "sslvpn web mode access"
set srcintf "ssl.root"
set dstintf "port1"
set srcaddr "all"
set dstaddr "192.168.1.0"
set groups “sslvpngroup”
set action accept
set schedule "always"
set service "ALL"
set nat enable
next
end
To see the results of web portal:
1. From a remote device, use a web browser to log into the SSL VPN web portal http://172.20.120.123:10443.
2. Log in using the sslvpnuser1 credentials.
3. On the FortiGate, go to Dashboard > Network and expand the SSL-VPN widget to verify the user’s connection.
To see the results of tunnel connection:
1. Download FortiClient from www.forticlient.com.
2. Open the FortiClient Console and go to Remote Access > Configure VPN.
3. Add a new connection.
l Set the connection name.
l Set Remote Gateway to 172.20.120.123.
4. Select Customize Port and set it to 10443.
5. Save your settings.
6. Log in using the sslvpnuser1 credentials and check that you are logged into the SSL VPN tunnel.
To check the SSL VPN connection using the GUI:
1. Go to Dashboard > Network and expand the SSL-VPN widget to verify the user’s connection.
2. Go to Log & Report > Forward Traffic to view the details of the SSL VPN traffic.
To check the web portal login using the CLI:
get vpn ssl monitor
SSL VPN Login Users:
Index User Auth Type Timeout From HTTP in/out HTTPS in/out
0 sslvpnuser1 1(1) 229 10.1.100.254 0/0 0/0
FortiOS 6.4.2 Administration Guide 1463
Fortinet Inc.
VPN
SSL VPN sessions:
Index User Source IP Duration I/O Bytes Tunnel/Dest IP
To check the tunnel login using the CLI:
get vpn ssl monitor
SSL VPN Login Users:
Index User Auth Type Timeout From HTTP in/out HTTPS in/out
0 sslvpnuser1 1(1) 291 10.1.100.254 0/0 0/0
SSL VPN sessions:
Index User Source IP Duration I/O Bytes Tunnel/Dest IP
0 sslvpnuser1 10.1.100.254 9 22099/43228 10.212.134.200
SSL VPN with RADIUS and FortiToken mobile push on FortiAuthenticator
This is a sample configuration of SSL VPN that uses FortiAuthenticator as a RADIUS authentication server and
FortiToken mobile push two-factor authentication. If you enable push notifications, users can accept or deny the
authentication request.
Sample topology
Sample configuration
WAN interface is the interface connected to ISP. This example shows static mode. You can also use DHCP or PPPoE
mode. The SSL VPN connection is established over the WAN interface.
FortiOS 6.4.2 Administration Guide 1464
Fortinet Inc.
VPN
To configure FortiAuthenticator using the GUI:
1. Add a FortiToken mobile license on the FortiAuthenticator:
a. On the FortiAuthenticator, go to Authentication > User Management > FortiTokens.
b. Click Create New.
c. Set Token type to FortiToken Mobile and enter the FortiToken Activation codes.
2. Create the RADIUS client (FortiGate) on the FortiAuthenticator:
a. On the FortiAuthenticator, go to Authentication > RADIUS Service > Clients to add the FortiGate as a RADIUS
client OfficeServer).
b. Enter the FortiGate IP address and set a Secret.
The secret is a pre-shared secure password that the FortiGate uses to authenticate to the FortiAuthenticator.
c. Set Authentication method to Enforce two-factor authentication.
d. Select Enable FortiToken Mobile push notifications authentication.
e. Set Realms to local | Local users.
3. Create a user and assign FortiToken mobile to the user on the FortiAuthenticator:
a. On the FortiAuthenticator, go to Authentication > User Management > Local Users to create a user
sslvpnuser1.
b. Enable Allow RADIUS authentication and click OK to access additional settings.
c. Enable Token-based authentication and select to deliver the token code by FortiToken.
d. Select the FortiToken added from the FortiToken Mobile dropdown menu.
e. Set Delivery method to Email and fill in the User Information section.
f. Go to Authentication > User Management > User Groups to create a group sslvpngroup.
g. Add sslvpnuser1 to the group by moving the user from Available users to Selected users.
4. Install the FortiToken mobile application on your Android or iOS smartphone.
The FortiAuthenticator sends the FortiToken mobile activation to the user’s email address.
5. Activate the FortiToken mobile through the FortiToken mobile application by entering the activation code or
scanning the QR code.
To configure SSL VPN using the GUI:
1. Configure the interface and firewall address. The port1 interface connects to the internal network.
a. Go to Network > Interfaces and edit the wan1 interface.
b. Set IP/Network Mask to 172.20.120.123/255.255.255.0.
c. Edit port1 interface and set IP/Network Mask to 192.168.1.99/255.255.255.0.
d. Click OK.
e. Go to Policy & Objects > Address and create an address for internet subnet 192.168.1.0.
2. Create a RADIUS user and user group:
a. On the FortiGate, go to User & Authentication > RADIUS Servers to create a user to connect to the RADIUS
server (FortiAuthenticator).
b. For Name, use FAC-RADIUS.
c. Enter the IP address of the FortiAuthenticator, and enter the Secret created above.
d. Click Test Connectivity to ensure you can connect to the RADIUS server.
e. Select Test User Credentials and enter the credentials for sslvpnuser1.
The FortiGate can now connect to the FortiAuthenticator as the RADIUS client.
f. Go to User & Authentication > User Groups and click Create New to map authenticated remote users to a user
group on the FortiGate.
g. For Name, use SSLVPNGroup.
FortiOS 6.4.2 Administration Guide 1465
Fortinet Inc.
VPN
h. In Remote Groups, click Add.
i. In the Remote Server dropdown list, select FAC-RADIUS.
j. Leave the Groups field blank.
3. Configure SSL VPN web portal:
a. Go to VPN > SSL-VPN Portals to edit the full-access portal.
This portal supports both web and tunnel mode.
b. Disable Enable Split Tunneling so that all SSL VPN traffic goes through the FortiGate.
4. Configure SSL VPN settings:
a. Go to VPN > SSL-VPN Settings.
b. Select the Listen on Interface(s), in this example, wan1.
c. Set Listen on Port to 10443.
d. Set Server Certificate to the authentication certificate.
e. Under Authentication/Portal Mapping, set default Portal web-access for All Other Users/Groups.
f. Create new Authentication/Portal Mapping for group sslvpngroup mapping portal full-access.
5. Configure SSL VPN firewall policy:
a. Go to Policy & Objects > Firewall Policy.
b. Fill in the firewall policy name. In this example, sslvpn certificate auth.
c. Incoming interface must be SSL-VPN tunnel interface(ssl.root).
d. Set the Source Address to all and Source User to sslvpngroup.
e. Set the Outgoing Interface to the local network interface so that the remote user can access the internal
network. In this example: port1.
f. Set Destination Address to the internal protected subnet 192.168.1.0.
g. Set Schedule to always, Service to ALL, and Action to Accept.
h. Enable NAT.
i. Configure any remaining firewall and security options as desired.
j. Click OK.
To configure SSL VPN using the CLI:
1. Configure the interface and firewall address:
config system interface
edit "wan1"
set vdom "root"
set ip 172.20.120.123 255.255.255.0
next
end
2. Configure internal interface and protected subnet, then connect the port1 interface to the internal network:
config system interface
edit "port1"
set vdom "root"
set ip 192.168.1.99 255.255.255.0
next
end
config firewall address
edit "192.168.1.0"
set subnet 192.168.1.0 255.255.255.0
FortiOS 6.4.2 Administration Guide 1466
Fortinet Inc.
VPN
next
end
3. Create a RADIUS user and user group:
config user radius
edit "FAC-RADIUS"
set server "172.20.120.161"
set secret <FAC client secret>
next
end
config user group
edit "sslvpngroup"
set member "FAC-RADIUS"
next
end
4. Configure SSL VPN web portal:
config vpn ssl web portal
edit "full-access"
set tunnel-mode enable
set web-mode enable
set ip-pools "SSLVPN_TUNNEL_ADDR1"
set split-tunneling disable
next
end
5. Configure SSL VPN settings:
config vpn ssl settings
set servercert "server_certificate"
set tunnel-ip-pools "SSLVPN_TUNNEL_ADDR1"
set source-interface "wan1"
set source-address "all"
set default-portal "web-access"
config authentication-rule
edit 1
set groups "sslvpngroup"
set portal "full-access"
next
end
end
6. Configure one SSL VPN firewall policy to allow remote user to access the internal network:
config firewall policy
edit 1
set name "sslvpn web mode access"
set srcintf "ssl.root"
set dstintf "port1"
set srcaddr "all"
set dstaddr "192.168.1.0"
set groups “sslvpngroup”
set action accept
set schedule "always"
set service "ALL"
set nat enable
FortiOS 6.4.2 Administration Guide 1467
Fortinet Inc.
VPN
next
end
To see the results of web portal:
1. From a remote device, use a web browser to log into the SSL VPN web portal http://172.20.120.123:10443.
2. Log in using the sslvpnuser1 credentials.
The FortiAuthenticator pushes a login request notification through the FortiToken Mobile application.
3. Check your mobile device and select Approve.
When the authentication is approved, sslvpnuser1 is logged into the SSL VPN portal.
4. On the FortiGate, go to Dashboard > Network and expand the SSL-VPN widget to verify the user’s connection.
To see the results of tunnel connection:
1. Download FortiClient from www.forticlient.com.
2. Open the FortiClient Console and go to Remote Access > Configure VPN.
3. Add a new connection:
a. Set the connection name.
b. Set Remote Gateway to the IP of the listening FortiGate interface, in this example: 172.20.120.123.
c. Select Customize Port and set it to 10443.
4. Save your settings.
5. Log in using the sslvpnuser1 credentials and click FTM Push.
The FortiAuthenticator pushes a login request notification through the FortiToken Mobile application.
6. Check your mobile device and select Approve.
When the authentication is approved, sslvpnuser1 is logged into the SSL VPN tunnel.
To check the SSL VPN connection using the GUI:
1. Go to Dashboard > Network and expand the SSL-VPN widget to verify the user’s connection.
2. Go to Log & Report > Forward Traffic to view the details of the SSL VPN traffic.
To check the web portal login using the CLI:
get vpn ssl monitor
SSL VPN Login Users:
Index User Auth Type Timeout From HTTP in/out HTTPS in/out
0 sslvpnuser1 1(1) 229 10.1.100.254 0/0 0/0
SSL VPN sessions:
Index User Source IP Duration I/O Bytes Tunnel/Dest IP
To check the tunnel login on CLI:
get vpn ssl monitor
SSL VPN Login Users:
Index User Auth Type Timeout From HTTP in/out HTTPS in/out
0 sslvpnuser1 1(1) 291 10.1.100.254 0/0 0/0
SSL VPN sessions:
Index User Source IP Duration I/O Bytes Tunnel/Dest IP
0 sslvpnuser1 10.1.100.254 9 22099/43228 10.212.134.200
FortiOS 6.4.2 Administration Guide 1468
Fortinet Inc.
VPN
SSL VPN with RADIUS password renew on FortiAuthenticator
This is a sample configuration of SSL VPN for RADIUS users with Force Password Change on next logon. In this
example, the RADIUS server is a FortiAuthenticator. A user test1 is configured on FortiAuthenticator with Force
password change on next logon.
Sample topology
Sample configuration
WAN interface is the interface connected to ISP. This example shows static mode. You can also use DHCP or PPPoE
mode. The SSL VPN connection is established over the WAN interface.
To configure SSL VPN using the GUI:
1. Configure the interface and firewall address. The port1 interface connects to the internal network.
a. Go to Network > Interfaces and edit the wan1 interface.
b. Set IP/Network Mask to 172.20.120.123/255.255.255.0.
c. Edit port1 interface and set IP/Network Mask to 192.168.1.99/255.255.255.0.
d. Click OK.
e. Go to Policy & Objects > Address and create an address for internet subnet 192.168.1.0.
2. Create a RADIUS user.
a. Go to User & Authentication > RADIUS Servers to create a user.
b. Set Authentication method to MS-CHAP-v2.
c. Enter the IP/Name and Secret.
FortiOS 6.4.2 Administration Guide 1469
Fortinet Inc.
VPN
d. Click Create.
Password renewal only works with the MS-CHAP-v2 authentication method.
e. To enable the password-renew option, use these CLI commands.
config user radius
edit "fac"
set server "172.20.120.161"
set secret <fac radius password>
set auth-type ms_chap_v2
set password-renewal enable
next
end
3. Configure user group.
a. Go to User & Authentication > User Groups to create a user group.
b. For the Name, enter fac-group.
c. In Remote Groups, click Add to add Remote Server you just created.
4. Configure SSL VPN web portal.
a. Go to VPN > SSL-VPN Portals to edit the full-access portal.
This portal supports both web and tunnel mode.
b. Disable Enable Split Tunneling so that all SSL VPN traffic goes through the FortiGate.
5. Configure SSL VPN settings.
a. Go to VPN > SSL-VPN Settings.
b. Select the Listen on Interface(s), in this example, wan1.
c. Set Listen on Port to 10443.
d. Set Server Certificate to the authentication certificate.
e. Under Authentication/Portal Mapping, set default Portal web-access for All Other Users/Groups.
f. Create new Authentication/Portal Mapping for group fac-group mapping portal full-access.
6. Configure SSL VPN firewall policy.
a. Go to Policy & Objects > Firewall Policy.
b. Fill in the firewall policy name, in this example, sslvpn certificate auth.
c. Incoming interface must be SSL-VPN tunnel interface(ssl.root).
d. Set the Source Address to all and Source User to fac-group.
e. Set the Outgoing Interface to the local network interface so that the remote user can access the internal
network, in this example, port1.
f. Set Destination Address to the internal protected subnet 192.168.1.0.
g. Set Schedule to always, Service to ALL, and Action to Accept.
h. Enable NAT.
i. Configure any remaining firewall and security options as desired.
j. Click OK.
To configure SSL VPN using the CLI:
1. Configure the interface and firewall address.
config system interface
edit "wan1"
set vdom "root"
set ip 172.20.120.123 255.255.255.0
FortiOS 6.4.2 Administration Guide 1470
Fortinet Inc.
VPN
next
end
2. Configure internal interface and protected subnet, then connect the port1 interface to the internal network.
config system interface
edit "port1"
set vdom "root"
set ip 192.168.1.99 255.255.255.0
next
end
config firewall address
edit "192.168.1.0"
set subnet 192.168.1.0 255.255.255.0
next
end
3. Configure the RADIUS server.
config user radius
edit "fac"
set server "172.18.58.107"
set secret <fac radius password>
set auth-type ms_chap_v2
set password-renewal enable
next
end
4. Configure user group.
config user group
edit "fac-group"
set member "fac"
next
end
5. Configure SSL VPN web portal.
config vpn ssl web portal
edit "full-access"
set tunnel-mode enable
set web-mode enable
set ip-pools "SSLVPN_TUNNEL_ADDR1"
set split-tunneling disable
next
end
6. Configure SSL VPN settings.
config vpn ssl settings
set servercert "server_certificate"
set tunnel-ip-pools "SSLVPN_TUNNEL_ADDR1"
set source-interface "wan1"
set source-address "all"
set default-portal "web-access"
config authentication-rule
edit 1
set groups "fac-group"
set portal "full-access"
FortiOS 6.4.2 Administration Guide 1471
Fortinet Inc.
VPN
next
end
end
7. Configure one SSL VPN firewall policy to allow remote user to access the internal network.
config firewall policy
edit 1
set name "sslvpn web mode access"
set srcintf "ssl.root"
set dstintf "port1"
set srcaddr "all"
set dstaddr "192.168.1.0"
set groups “fac-group”
set action accept
set schedule "always"
set service "ALL"
set nat enable
next
end
To see the results of web portal:
1. From a remote device, use a web browser to log into the SSL VPN web portal http://172.20.120.123:10443.
2. Log in using the test1 credentials.
Use a user which is configured on FortiAuthenticator with Force password change on next logon.
3. Click Login. You are prompted to enter a new password.
4. On the FortiGate, go to Dashboard > Network and expand the SSL-VPN widget to verify the user’s connection.
To see the results of tunnel connection:
1. Download FortiClient from www.forticlient.com.
2. Open the FortiClient Console and go to Remote Access > Configure VPN.
3. Add a new connection.
l Set the connection name.
l Set Remote Gateway to the IP of the listening FortiGate interface, in this example, 172.20.120.123.
4. Select Customize Port and set it to 10443.
5. Save your settings.
6. Log in using the test1 credentials.
You are prompted to enter a new password.
To check the SSL VPN connection using the GUI:
1. Go to Dashboard > Network and expand the SSL-VPN widget to verify the user’s connection.
2. Go to Log & Report > Events and select VPN Events from the event type dropdown list to view the details of the SSL
VPN connection event log.
3. Go to Log & Report > Forward Traffic to view the details of the SSL VPN traffic.
To check the web portal login using the CLI:
get vpn ssl monitor
SSL VPN Login Users:
FortiOS 6.4.2 Administration Guide 1472
Fortinet Inc.
VPN
Index User Auth Type Timeout From HTTP in/out HTTPS in/out
0 test1 1(1) 229 10.1.100.254 0/0 0/0
SSL VPN sessions:
Index User Source IP Duration I/O Bytes Tunnel/Dest IP
To check the tunnel login using the CLI:
get vpn ssl monitor
SSL VPN Login Users:
Index User Auth Type Timeout From HTTP in/out HTTPS in/out
0 test1 1(1) 291 10.1.100.254 0/0 0/0
SSL VPN sessions:
Index User Source IP Duration I/O Bytes Tunnel/Dest IP
0 test1 10.1.100.254 9 22099/43228 10.212.134.200
SSL VPN with RADIUS on Windows NPS
This is an example configuration of SSL VPN that uses Windows Network Policy Server (NPS) as a RADIUS
authentication server.
The NPS must already be configured to accept the FortiGate as a RADIUS client and the choice of authentication
method, such as MS-CHAPv2. A shared key must also have been created.
Example
The user is connecting from their PC to the FortiGate's port1 interface. RADIUS authentication occurs between the
FortiGate and the Windows NPS, and the SSL-VPN connection is established once the authentication is successful.
FortiOS 6.4.2 Administration Guide 1473
Fortinet Inc.
VPN
Configure SSL-VPN with RADIUS on Windows NPS in the GUI
To configure the internal and external interfaces:
1. Go to Network > Interfaces
2. Edit the port1 interface and set IP/Network Mask to 192.168.2.5/24.
3. Edit the port2 interface and set IP/Network Mask to 192.168.20.5/24.
4. Click OK.
To create a firewall address:
1. Go to Policy & Objects > Addresses and click Create New > Address.
2. Set Name to 192.168.20.0.
3. Leave Type as Subnet
4. Set IP/Netmask to 192.168.20.0/24.
5. Click OK.
To add the RADIUS server:
1. Go to User & Authentication > RADIUS Servers and click Create New.
2. Set Name to rad-server.
3. Leave Authentication method set to Default. The PAP, MS-CHAPv2, and CHAP methods will be tried in order.
4. Under Primary Server, set IP/Name to 192.168.20.6 and Secret to the shared secret configured on the RADIUS
server.
5. Click Test Connectivity to test the connection to the server, and ensure that Connection status is Successful.
6. Optionally, click Test User Credentials to test user credentials. Testing from the GUI is limited to PAP.
7. Click OK.
To configure a user group:
1. Go to User & Authentication > User Groups and click Create New.
2. Set Name to rad-group.
FortiOS 6.4.2 Administration Guide 1474
Fortinet Inc.
VPN
3. Under Remote Groups, click Add and add the rad-server.
4. Click OK.
To configure SSL VPN settings:
1. Go to VPN > SSL-VPN Settings.
2. Select the Listen on Interface(s), in this example, port1.
3. Set Listen on Port to 10443.
4. If you have a server certificate, set Server Certificate to the authentication certificate.
5. Under Authentication/Portal Mapping:
a. Edit All Other Users/Groups and set Portal to web-access.
b. Click Create New and create a mapping for the rad-group user group with Portal set to full-access.
c. Click OK.
6. Click Apply.
To configure an SSL VPN firewall policy:
1. Go to Policy & Objects > Firewall Policy and click Create New.
2. Set the policy name, in this example, sslvpn-radius.
3. Set Incoming Interface to SSL-VPN tunnel interface(ssl.root).
4. Set Outgoing Interface to the local network interface so that the remote user can access the internal network. In this
example, port2.
5. Set the Source > Address to all and Source > User to rad-group.
6. Set Destination > Address to the internal protected subnet 192.168.20.0.
7. Set Schedule to always, Service to ALL, and Action to Accept.
FortiOS 6.4.2 Administration Guide 1475
Fortinet Inc.
VPN
8. Enable NAT.
9. Configure the remaining options as required.
10. Click OK.
Configure SSL-VPN with RADIUS on Windows NPS in the CLI
To configure SSL VPN using the CLI:
1. Configure the internal and external interfaces:
config system interface
edit "port1"
set vdom "root"
set ip 192.168.2.5 255.255.255.0
set alias internal
next
edit "port2"
set vdom "root"
set ip 192.168.20.5 255.255.255.0
set alias external
next
end
2. Configure the firewall address:
config firewall address
edit "192.168.20.0"
set subnet 192.168.20.0 255.255.255.0
next
end
3. Add the RADIUS server:
config user radius
edit "rad-server"
set server "192.168.20.6"
set secret *********
next
end
4. Create a user group and add the RADIUS server to it:.
config user group
edit "rad-group"
set member "rad-server"
next
end
FortiOS 6.4.2 Administration Guide 1476
Fortinet Inc.
VPN
5. Configure SSL VPN settings:
config vpn ssl settings
set servercert "server_certificate"
set tunnel-ip-pools "SSLVPN_TUNNEL_ADDR1"
set source-interface "port1"
set source-address "all"
set default-portal "web-access"
config authentication-rule
edit 1
set groups "rad-group"
set portal "full-access"
next
end
end
6. Configure an SSL VPN firewall policy to allow remote user to access the internal network.
config firewall policy
edit 1
set name "sslvpn-radius"
set srcintf "ssl.root"
set dstintf "port2"
set srcaddr "all"
set dstaddr "192.168.20.0"
set groups “rad-group”
set action accept
set schedule "always"
set service "ALL"
set nat enable
next
end
Results
To connect with FortiClient in tunnel mode:
1. Download FortiClient from www.forticlient.com.
2. Open the FortiClient Console and go to Remote Access > Configure VPN.
3. Add a new connection:
a. Set the connection name.
b. Set Remote Gateway to 192.168.2.5.
c. Select Customize Port and set it to 10443.
4. Save your settings.
5. Log in using the RADIUS user credentials.
To check the SSL VPN connection using the GUI:
1. Go to Dashboard > Network and expand the SSL-VPN widget to verify the user’s connection.
2. Go to Log & Report > Events and select VPN Events from the event type drop-down list to view the details of the
SSL VPN connection event log.
3. Go to Log & Report > Forward Traffic to view the details of the SSL VPN traffic.
FortiOS 6.4.2 Administration Guide 1477
Fortinet Inc.
VPN
To check the login using the CLI:
# get vpn ssl monitor
SSL VPN Login Users:
Index User Group Auth Type Timeout From HTTP in/out HTTPS in/out
0 radkeith rad-group 2(1) 295 192.168.2.202 0/0 0/0
SSL VPN sessions:
Index User Group Source IP Duration I/O Bytes Tunnel/Dest IP
0 radkeith rad-group 192.168.2.202 18 28502/4966
10.212.134.200
SSL VPN with multiple RADIUS servers
When configuring two or more RADIUS servers, you can configure a Primary and Secondary server within the same
RADIUS server configurations for backup purposes. You can also configure multiple RADIUS servers within the same
User Group to service the access request at the same time.
A tertiary server can be configured in the CLI.
Sample topology
Sample configurations
l Configure a Primary and Secondary server for backup on page 1478
l Authenticating to two RADIUS servers concurrently on page 1482
Configure a Primary and Secondary server for backup
When you define a Primary and Secondary RADIUS server, the access request will always be sent to the Primary server
first. If the request is denied with an Access-Reject, then the user authentication fails. However, if there is no response
from the Primary server after another attempt, the access request will be sent to the Secondary server.
FortiOS 6.4.2 Administration Guide 1478
Fortinet Inc.
VPN
In this example, you will use a Windows NPS server as the Primary server and a FortiAuthenticator as the Secondary
server. It is assumed that users are synchronized between the two servers.
To configure the internal and external interfaces:
1. Go to Network > Interfaces.
2. Edit the port1 interface and set IP/Network Mask to 192.168.2.5/24.
3. Edit the port2 interface and set IP/Network Mask to 192.168.20.5/24.
4. Click OK.
To create a firewall address:
1. Go to Policy & Objects > Addresses and click Create New > Address.
2. Set Name to 192.168.20.0.
3. Leave Type as Subnet
4. Set IP/Netmask to 192.168.20.0/24.
5. Click OK.
To add the RADIUS servers:
1. Go to User & Authentication > RADIUS Servers and click Create New.
2. Set Name to PrimarySecondary.
3. Leave Authentication method set to Default. The PAP, MS-CHAPv2, and CHAP methods will be tried in order.
4. Under Primary Server, set IP/Name to 192.168.20.6 and Secret to the shared secret configured on the RADIUS
server.
5. Click Test Connectivity to test the connection to the server, and ensure that Connection status is Successful.
6. Under Secondary Server, set IP/Name to 192.168.2.71 and Secret to the shared secret configured on the RADIUS
server.
7. Click Test Connectivity to test the connection to the server, and ensure that Connection status is Successful.
8. Click OK.
To configure the user group:
1. Go to User & Authentication > User Groups and click Create New.
2. In the Name field, enter PrimarySecondaryGroup.
3. In the Remote Groups area, click Add, and from the Remote Server dropdown, select PrimarySecondary.
4. Click OK, and then click OK again.
To configure the SSL VPN settings:
1. Go to VPN > SSL-VPN Settings.
2. From the Listen on Interface(s) dropdown select port1.
3. In the Listen on Port field enter 10443.
4. Optionally, from the Server Certificate dropdown, select the authentication certificate if you have one for this SSL
VPN portal.
5. Under Authentication/Portal Mapping, set the default portal web-access.
a. Select All Other Users/Groups and click Edit.
b. From the Portal dropdown, select web-access.
FortiOS 6.4.2 Administration Guide 1479
Fortinet Inc.
VPN
c. Click OK.
6. Create a web portal for PrimarySecondaryGroup.
a. Under Authentication/Portal Mapping, click Create New.
b. Click Users/Groups and select PrimarySecondaryGroup.
c. From the Portal dropdown, select full-access.
d. Click OK.
To configure SSL VPN firewall policy:
1. Go to Policy & Objects > Firewall Policy.
2. Click Create New to create a new policy, or double-click an existing policy to edit it and configure the following
settings:
Name Enter a name for the policy.
Incoming Interface SSL-VPN tunnel interface (ssl.root)
Outgoing interface Set to the local network interface so that the remote user can access the internal
network.
For this example, select port3.
Source In the Address tab, select SSLVPN_TUNNEL_ADDR1
In the User tab, select PrimarySecondaryGroup
Destination Select the internal protected subnet 192.168.20.0.
Schedule always
Service All
Action Accept
NAT Enable
3. Configure any remaining firewall and security options as required.
4. Click OK.
To configure SSL VPN using the CLI:
1. Configure the internal interface and firewall address:
config system interface
edit "port3"
set vdom "root"
set ip 192.168.20.5 255.255.255.0
set alias "internal"
next
end
config firewall address
edit "192.168.20.0"
set uuid cc41eec2-9645-51ea-d481-5c5317f865d0
set subnet 192.168.20.0 255.255.255.0
next
end
2. Configure the RADIUS server:
config user radius
FortiOS 6.4.2 Administration Guide 1480
Fortinet Inc.
VPN
edit "PrimarySecondary"
set server "192.168.20.6"
set secret <secret>
set secondary-server "192.168.2.71"
set secondary-secret <secret>
next
end
3. Add the RADIUS user to the user group:
config user group
edit "PrimarySecondaryGroup"
set member "PrimarySecondary "
next
end
4. Configure SSL VPN settings:
config vpn ssl settings
set servercert "server_certificate"
set tunnel-ip-pools "SSLVPN_TUNNEL_ADDR1"
set source-interface "port1"
set source-address "all"
set default-portal "web-access"
config authentication-rule
edit 1
set groups "PrimarySecondaryGroup "
set portal "full-access"
next
end
end
5. Configure one SSL VPN firewall policy to allow remote users to access the internal network:
config firewall policy
edit 1
set name "sslvpn-radius"
set srcintf "ssl.root"
set dstintf "port3"
set srcaddr "all"
set dstaddr "192.168.20.0"
set groups “PrimarySecondaryGroup”
set action accept
set schedule "always"
set service "ALL"
set nat enable
next
end
To verify the connection:
User radkeith is a member of both the NPS server and the FAC server.
When the Primary server is up, it will connect to the SSL VPN tunnel using FortiClient.
# diagnose sniffer packet any 'port 1812' 4 0 l
interfaces=[any]
filters=[port 1812]
2020-05-15 16:26:50.838453 port3 out 192.168.20.5.2374 -> 192.168.20.6.1812: udp 118
2020-05-15 16:26:50.883166 port3 in 192.168.20.6.1812 -> 192.168.20.5.2374: udp 20
2020-05-15 16:26:50.883374 port3 out 192.168.20.5.2374 -> 192.168.20.6.1812: udp 182
2020-05-15 16:26:50.884683 port3 in 192.168.20.6.1812 -> 192.168.20.5.2374: udp 228
FortiOS 6.4.2 Administration Guide 1481
Fortinet Inc.
VPN
The access request is sent to the Primary NPS server 192.168.20.6, and the connection is successful.
# get vpn ssl monitor
SSL VPN Login Users:
Index User Group Auth Type Timeout From HTTP
in/out HTTPS in/out
0 radkeith PrimarySecondaryGroup 2(1) 285 192.168.2.202
0/0 0/0
SSL VPN sessions:
Index User Group Source IP Duration I/O Bytes
Tunnel/Dest IP
0 radkeith PrimarySecondaryGroup 192.168.2.202 62 132477/4966
10.212.134.200
When the Primary server is down, and the Secondary server is up, the connection is made to the SSLVPN tunnel again:
# diagnose sniffer packet any 'port 1812' 4 0 l
interfaces=[any]
filters=[port 1812]
2020-05-15 16:31:23.016875 port3 out 192.168.20.5.7989 -> 192.168.20.6.1812: udp 118
2020-05-15 16:31:28.019470 port3 out 192.168.20.5.7989 -> 192.168.20.6.1812: udp 118
2020-05-15 16:31:30.011874 port1 out 192.168.2.5.23848 -> 192.168.2.71.1812: udp 118
2020-05-15 16:31:30.087564 port1 in 192.168.2.71.1812 -> 192.168.2.5.23848: udp 20
Access request is sent to the Primary NPS server 192.168.20.6, but there was no response. RADIUS authentication falls
through to the Secondary FortiAuthenticator 192.168.2.71, and the authentication was accepted. The VPN connection is
established.
# get vpn ssl monitor
SSL VPN Login Users:
Index User Group Auth Type Timeout From HTTP
in/out HTTPS in/out
0 radkeith PrimarySecondaryGroup 2(1) 287 192.168.2.202
0/0 0/0
SSL VPN sessions:
Index User Group Source IP Duration I/O Bytes
Tunnel/Dest IP
0 radkeith PrimarySecondaryGroup 192.168.2.202 48 53544/4966
10.212.134.200
Authenticating to two RADIUS servers concurrently
There are times where users are located on separate RADIUS servers. This may be the case when migrating from an old
server to a new one for example. In this scenario, a Windows NPS server and a FortiAuthenticator are configured in the
same User Group. The access-request is sent to both servers concurrently. If FortiGate receives an access-accept from
either server, authentication is successful.
To configure the internal and external interfaces:
1. Go to Network > Interfaces.
2. Edit the port1 interface and set IP/Network Mask to 192.168.2.5/24.
FortiOS 6.4.2 Administration Guide 1482
Fortinet Inc.
VPN
3. Edit the port2 interface and set IP/Network Mask to 192.168.20.5/24.
4. Click OK.
To create a firewall address:
1. Go to Policy & Objects > Addresses and click Create New > Address.
2. Set Name to 192.168.20.0.
3. Leave Type as Subnet
4. Set IP/Netmask to 192.168.20.0/24.
5. Click OK.
To configure the first RADIUS server:
1. Go to User & Authentication > RADIUS Servers and click Create New.
2. Set Name to win2k16.
3. Leave Authentication method set to Default. The PAP, MS-CHAPv2, and CHAP methods will be tried in order.
4. Under Primary Server, set IP/Name to 192.168.20.6 and Secret to the shared secret configured on the RADIUS
server.
5. Click Test Connectivity to test the connection to the server, and ensure that Connection status is Successful.
6. Click OK.
To configure the second RADIUS server:
1. Go to User & Authentication > RADIUS Servers and click Create New.
2. Set Name to fac.
3. Leave Authentication method set to Default. The PAP, MS-CHAPv2, and CHAP methods will be tried in order.
4. Under Primary Server, set IP/Name to 192.168.2.71 and Secret to the shared secret configured on the RADIUS
server.
5. Click Test Connectivity to test the connection to the server, and ensure that Connection status is Successful.
6. Click OK.
To configure the user group:
1. Go to User & Authentication > User Groups and click Create New.
2. In the Name field, enter dualPrimaryGroup..
3. In the Remote Groups area, click Add, and from the Remote Server dropdown, select fac.
4. Click Add again. From the Remote Server dropdown select win2k16 and click OK.
5. Click OK, and then click OK again.
To configure the SSL VPN settings:
1. Go to VPN > SSL-VPN Settings.
2. From the Listen on Interface(s) dropdown select port1.
3. In the Listen on Port field enter 10443.
4. Optionally, from the Server Certificate dropdown, select the authentication certificate if you have one for this SSL
VPN portal.
FortiOS 6.4.2 Administration Guide 1483
Fortinet Inc.
VPN
5. Under Authentication/Portal Mapping, set the default portal web-access.
a. Select All Other Users/Groups and click Edit.
b. From the Portal dropdown, select web-access.
c. Click OK.
6. Create a web portal for PrimarySecondaryGroup.
a. Under Authentication/Portal Mapping, click Create New.
b. Click Users/Groups and select dualPrimaryGroup.
c. From the Portal dropdown, select full-access.
d. Click OK.
To configure SSL VPN firewall policy:
1. Go to Policy & Objects > Firewall Policy.
2. Click Create New to create a new policy, or double-click an existing policy to edit it.
Name Enter a name for the policy.
Incoming Interface SSL-VPN tunnel interface (ssl.root)
Outgoing interface Set to the local network interface so that the remote user can access the internal
network.
For this example, select port3.
Source In the Address tab, select SSLVPN_TUNNEL_ADDR1
In the User tab, select dualPrimaryGroup
Destination Select the internal protected subnet 192.168.20.0.
Schedule always
Service All
Action Accept
NAT Enable
3. Configure any remaining firewall and security options as required.
4. Click OK.
To configure SSL VPN using the CLI:
1. Configure the internal interface and firewall address:
config system interface
edit "port3"
set vdom "root"
set ip 192.168.20.5 255.255.255.0
set alias "internal"
next
end
config firewall address
edit "192.168.20.0"
set uuid cc41eec2-9645-51ea-d481-5c5317f865d0
set subnet 192.168.20.0 255.255.255.0
next
end
FortiOS 6.4.2 Administration Guide 1484
Fortinet Inc.
VPN
2. Configure the RADIUS server:
config user radius
edit "win2k16"
set server "192.168.20.6"
set secret <secret>
next
edit "fac"
set server "192.168.2.71"
set secret <secret>
next
end
3. Add the RADIUS user to the user group:
config user group
edit "dualPrimaryGroup"
set member "win2k16" “fac”
next
end
4. Configure SSL VPN settings:
config vpn ssl settings
set servercert "server_certificate"
set tunnel-ip-pools "SSLVPN_TUNNEL_ADDR1"
set source-interface "port1"
set source-address "all"
set default-portal "web-access"
config authentication-rule
edit 1
set groups "dualPrimaryGroup"
set portal "full-access"
next
end
end
5. Configure one SSL VPN firewall policy to allow remote users to access the internal network:
config firewall policy
edit 1
set name "sslvpn-radius"
set srcintf "ssl.root"
set dstintf "port3"
set srcaddr "all"
set dstaddr "192.168.20.0"
set groups “dualPrimaryGroup”
set action accept
set schedule "always"
set service "ALL"
set nat enable
next
end
To verify the connection:
User fackeith is a member of the FortiAuthenticator server only.
User radkeith is a member of both the NPS server and the FortiAuthenticator server, but has different passwords on
each server.
FortiOS 6.4.2 Administration Guide 1485
Fortinet Inc.
VPN
Case 1: Connect to the SSLVPN tunnel using FortiClient with user FacAdmin:
# diagnose sniffer packet any 'port 1812' 4 0 l
interfaces=[any]
filters=[port 1812]
2020-05-15 17:21:31.217985 port3 out 192.168.20.5.11490 -> 192.168.20.6.1812: udp 118
2020-05-15 17:21:31.218091 port1 out 192.168.2.5.11490 -> 192.168.2.71.1812: udp 118
2020-05-15 17:21:31.219314 port3 in 192.168.20.6.1812 -> 192.168.20.5.11490: udp 20 <--
access-reject
2020-05-15 17:21:31.219519 port3 out 192.168.20.5.11490 -> 192.168.20.6.1812: udp 182
2020-05-15 17:21:31.220219 port3 in 192.168.20.6.1812 -> 192.168.20.5.11490: udp 42
2020-05-15 17:21:31.220325 port3 out 192.168.20.5.11490 -> 192.168.20.6.1812: udp 119
2020-05-15 17:21:31.220801 port3 in 192.168.20.6.1812 -> 192.168.20.5.11490: udp 20
2020-05-15 17:21:31.236009 port1 in 192.168.2.71.1812 -> 192.168.2.5.11490: udp 20 <--
access-accept
Access is denied by the NPS server because the user does not exist. However, access is accepted by
FortiAuthenticator. The end result is the authentication is successful.
# get vpn ssl monitor
SSL VPN Login Users:
Index User Group Auth Type Timeout From HTTP
in/out HTTPS in/out
0 fackeith dualPrimaryGroup 2(1) 292 192.168.2.202 0/0
0/0
SSL VPN sessions:
Index User Group Source IP Duration I/O Bytes
Tunnel/Dest IP
0 fackeith dualPrimaryGroup 192.168.2.202 149 70236/4966
10.212.134.200
Case 2: Connect to the SSLVPN tunnel using FortiClient with user radkeith:
# diagnose sniffer packet any 'port 1812' 4 0 l
interfaces=[any]
filters=[port 1812]
2020-05-15 17:26:07.335791 port1 out 192.168.2.5.17988 -> 192.168.2.71.1812: udp 118
2020-05-15 17:26:07.335911 port3 out 192.168.20.5.17988 -> 192.168.20.6.1812: udp 118
2020-05-15 17:26:07.337659 port3 in 192.168.20.6.1812 -> 192.168.20.5.17988: udp 20 <--
access-accept
2020-05-15 17:26:07.337914 port3 out 192.168.20.5.17988 -> 192.168.20.6.1812: udp 182
2020-05-15 17:26:07.339451 port3 in 192.168.20.6.1812 -> 192.168.20.5.17988: udp 228
2020-05-15 17:26:08.352597 port1 in 192.168.2.71.1812 -> 192.168.2.5.17988: udp 20 <--
access-reject
There is a password mismatch for this user on the Secondary RADIUS server. However, even though the
authentication was rejected by FortiAuthenticator, it was accepted by Windows NPS. Therefore, the end result is
authentication successful.
# get vpn ssl monitor
SSL VPN Login Users:
Index User Group Auth Type Timeout From HTTP
in/out HTTPS in/out
0 radkeith dualPrimaryGroup 2(1) 290 192.168.2.202 0/0
0/0
FortiOS 6.4.2 Administration Guide 1486
Fortinet Inc.
VPN
SSL VPN sessions:
Index User Group Source IP Duration I/O Bytes
Tunnel/Dest IP
0 radkeith dualPrimaryGroup 192.168.2.202 142 64875/4966
10.212.134.200
SSL VPN with local user password policy
This is a sample configuration of SSL VPN for users with passwords that expire after two days. Users are warned after
one day about the password expiring. The password policy can be applied to any local user password. The password
policy cannot be applied to a user group or a local remote user such as LDAP/RADIUS/TACACS+.
In FortiOS 6.2, users are warned after one day about the password expiring and have one day to renew it. If the
password expires, the user cannot renew the password and must contact the administrator for assistance.
In FortiOS 6.0/5.6, users are warned after one day about the password expiring and have to renew it. If the password
expires, the user can still renew the password.
Sample topology
FortiOS 6.4.2 Administration Guide 1487
Fortinet Inc.
VPN
Sample configuration
WAN interface is the interface connected to ISP. This example shows static mode. You can also use DHCP or PPPoE
mode. The SSL VPN connection is established over the WAN interface.
To configure SSL VPN using the GUI:
1. Configure the interface and firewall address. The port1 interface connects to the internal network.
a. Go to Network > Interfaces and edit the wan1 interface.
b. Set IP/Network Mask to 172.20.120.123/255.255.255.0.
c. Edit port1 interface and set IP/Network Mask to 192.168.1.99/255.255.255.0.
d. Click OK.
e. Go to Policy & Objects > Address and create an address for internet subnet 192.168.1.0.
2. Configure user and user group.
a. Go to User & Authentication > User Definition to create a local user.
b. Go to User & Authentication > User Groups to create a user group and add that local user to it.
3. Configure and assign the password policy using the CLI.
a. Configure a password policy that includes an expiry date and warning time. The default start time for the
password is the time the user was created.
config user password-policy
edit "pwpolicy1"
set expire-days 2
set warn-days 1
next
end
b. Assign the password policy to the user you just created.
config user local
edit "sslvpnuser1"
set type password
set passwd-policy "pwpolicy1"
next
end
4. Configure SSL VPN web portal.
a. Go to VPN > SSL-VPN Portals to edit the full-access portal.
This portal supports both web and tunnel mode.
b. Disable Enable Split Tunneling so that all SSL VPN traffic goes through the FortiGate.
5. Configure SSL VPN settings.
a. Go to VPN > SSL-VPN Settings.
b. Select the Listen on Interface(s), in this example, wan1.
c. Set Listen on Port to 10443.
d. Set Server Certificate to the authentication certificate.
e. Under Authentication/Portal Mapping, set default Portal web-access for All Other Users/Groups.
f. Create new Authentication/Portal Mapping for group sslvpngroup mapping portal full-access.
6. Configure SSL VPN firewall policy.
a. Go to Policy & Objects > Firewall Policy.
b. Fill in the firewall policy name. In this example, sslvpn certificate auth.
c. Incoming interface must be SSL-VPN tunnel interface(ssl.root).
FortiOS 6.4.2 Administration Guide 1488
Fortinet Inc.
VPN
d. Set the Source Address to all and Source User to sslvpngroup.
e. Set the Outgoing Interface to the local network interface so that the remote user can access the internal
network. In this example, port1.
f. Set Destination Address to the internal protected subnet 192.168.1.0.
g. Set Schedule to always, Service to ALL, and Action to Accept.
h. Enable NAT.
i. Configure any remaining firewall and security options as desired.
j. Click OK.
To configure SSL VPN using the CLI:
1. Configure the interface and firewall address.
config system interface
edit "wan1"
set vdom "root"
set ip 172.20.120.123 255.255.255.0
next
end
2. Configure internal interface and protected subnet, then connect the port1 interface to the internal network.
config system interface
edit "port1"
set vdom "root"
set ip 192.168.1.99 255.255.255.0
next
end
config firewall address
edit "192.168.1.0"
set subnet 192.168.1.0 255.255.255.0
next
end
3. Configure user and user group.
config user local
edit "sslvpnuser1"
set type password
set passwd your-password
next
end
config user group
edit "sslvpngroup"
set member "vpnuser1"
next
end
4. Configure and assign the password policy.
a. Configure a password policy that includes an expiry date and warning time. The default start time for the
password is the time the user was created.
config user password-policy
edit "pwpolicy1"
set expire-days 2
set warn-days 1
FortiOS 6.4.2 Administration Guide 1489
Fortinet Inc.
VPN
next
end
b. Assign the password policy to the user you just created.
config user local
edit "sslvpnuser1"
set type password
set passwd-policy "pwpolicy1"
next
end
5. Configure SSL VPN web portal.
config vpn ssl web portal
edit "full-access"
set tunnel-mode enable
set web-mode enable
set ip-pools "SSLVPN_TUNNEL_ADDR1"
set split-tunneling disable
next
end
6. Configure SSL VPN settings.
config vpn ssl settings
set servercert "server_certificate"
set tunnel-ip-pools "SSLVPN_TUNNEL_ADDR1"
set source-interface "wan1"
set source-address "all"
set default-portal "web-access"
config authentication-rule
edit 1
set groups "sslvpngroup"
set portal "full-access"
next
end
end
7. Configure one SSL VPN firewall policy to allow remote user to access the internal network.
config firewall policy
edit 1
set name "sslvpn web mode access"
set srcintf "ssl.root"
set dstintf "port1"
set srcaddr "all"
set dstaddr "192.168.1.0"
set groups “sslvpngroup”
set action accept
set schedule "always"
set service "ALL"
set nat enable
next
end
FortiOS 6.4.2 Administration Guide 1490
Fortinet Inc.
VPN
To see the results of web portal:
1. From a remote device, use a web browser to log into the SSL VPN web portal http://172.20.120.123:10443.
2. Log in using the sslvpnuser1 credentials.
When the warning time is reached, the user is prompted to enter a new password.
In FortiOS 6.2, when the password expires, the user cannot renew the password and must contact the
administrator.
In FortiOS 6.0/5.6, when the password expires, the user can still renew the password.
3. On the FortiGate, go to Dashboard > Network and expand the SSL-VPN widget to verify the user’s connection.
To see the results of tunnel connection:
1. Download FortiClient from www.forticlient.com.
2. Open the FortiClient Console and go to Remote Access > Configure VPN.
3. Add a new connection.
l Set the connection name.
l Set Remote Gateway to the IP of the listening FortiGate interface, in this example, 172.20.120.123.
4. Select Customize Port and set it to 10443.
5. Save your settings.
6. Log in using the sslvpnuser1 credentials.
When the warning time is reached, the user is prompted to enter a new password.
To check the SSL VPN connection using the GUI:
1. Go to Dashboard > Network and expand the SSL-VPN widget to verify the user’s connection.
2. Go to Log & Report > Forward Traffic to view the details of the SSL VPN traffic.
To check that login failed due to password expired on GUI:
1. Go to Log & Report > Events and select VPN Events from the event type dropdown list to see the SSL VPN alert
labeled ssl-login-fail.
2. Click Details to see the log details about the Reason sslvpn_login_password_expired.
To check the web portal login using the CLI:
get vpn ssl monitor
SSL VPN Login Users:
Index User Auth Type Timeout From HTTP in/out HTTPS in/out
0 sslvpnuser1 1(1) 229 10.1.100.254 0/0 0/0
SSL VPN sessions:
Index User Source IP Duration I/O Bytes Tunnel/Dest IP
To check the tunnel login using the CLI:
get vpn ssl monitor
SSL VPN Login Users:
Index User Auth Type Timeout From HTTP in/out HTTPS in/out
0 sslvpnuser1 1(1) 291 10.1.100.254 0/0 0/0
FortiOS 6.4.2 Administration Guide 1491
Fortinet Inc.
VPN
SSL VPN sessions:
Index User Source IP Duration I/O Bytes Tunnel/Dest IP
0 sslvpnuser1 10.1.100.254 9 22099/43228 10.212.134.200
To check the FortiOS 6.2 login password expired event log:
FG201E4Q17901354 # execute log filter category event
FG201E4Q17901354 # execute log filter field subtype vpn
FG201E4Q17901354 # execute log filter field action ssl-login-fail
FG201E4Q17901354 # execute log display
1: date=2019-02-15 time=10:57:56 logid="0101039426" type="event" subtype="vpn" level="alert"
vd="root" eventtime=1550257076 logdesc="SSL VPN login fail" action="ssl-login-fail"
tunneltype="ssl-web" tunnelid=0 remip=10.1.100.254 user="u1" group="g1" dst_host="N/A"
reason="sslvpn_login_password_expired" msg="SSL user failed to logged in"
SSL VPN with certificate authentication
This is an example configuration of SSL VPN that requires users to authenticate using a client certificate. In this
example, the server and client certificates are signed by the same Certificate Authority (CA).
Self-signed certificates are provided by default to simplify initial installation and testing. It is
HIGHLY recommended that you acquire a signed certificate for your installation.
Continuing to use these certificates can result in your connection being compromised, allowing
attackers to steal your information, such as credit card details.
For more information, please review the Use a non-factory SSL certificate for the SSL VPN
portal on page 1412 and learn how to Purchase and import a signed SSL certificate on page
827.
Configuration
WAN interface is the interface connected to ISP. This example shows static mode. You can also use DHCP or PPPoE
mode. The SSL VPN connection is established over the WAN interface.
To configure SSL VPN using the GUI:
1. Configure the interface and firewall address. The port1 interface connects to the internal network.
a. Go to Network > Interfaces and edit the wan1 interface.
b. Set IP/Network Mask to 172.20.120.123/255.255.255.0.
c. Edit port1 interface and set IP/Network Mask to 192.168.1.99/255.255.255.0.
FortiOS 6.4.2 Administration Guide 1492
Fortinet Inc.
VPN
d. Click OK.
e. Go to Policy & Objects > Address and create an address for internet subnet 192.168.1.0.
2. Install the server certificate. The server certificate is used for authentication and for encrypting SSL VPN traffic.
a. Go to System > Feature Visibility and ensure Certificates is enabled.
b. Go to System > Certificates and select Import > Local Certificate.
l Set Type to Certificate.
l Choose the Certificate file and the Key file for your certificate, and enter the Password.
l If required, you can change the Certificate Name.
The server certificate now appears in the list of Certificates.
3. Install the CA certificate.
The CA certificate is the certificate that signed both the server certificate and the user certificate. In this example, it
is used to authenticate SSL VPN users.
a. Go to System > Certificates and select Import > CA Certificate.
b. Select Local PC and then select the certificate file.
The CA certificate now appears in the list of External CA Certificates. In this example, it is called CA_Cert_1.
4. Configure PKI users and a user group.
To use certificate authentication, use the CLI to create PKI users.
config user peer
edit pki01
set ca CA_Cert_1
set subject User01
next
end
Ensure that the subject matches the name of the user certificate. In this example, User01.
When you have create a PKI user, a new menu is added to the GUI.
a. Go to User & Authentication > PKI to see the new user.
b. Edit the user account and expand Two-factor authentication.
c. Enable Require two-factor authentication and set a password for the account.
d. Go to User & Authentication > User > User Groups and create a group sslvpngroup.
e. Add the PKI user pki01 to the group.
5. Configure SSL VPN web portal.
a. Go to VPN > SSL-VPN Portals to edit the full-access portal.
This portal supports both web and tunnel mode.
b. Disable Enable Split Tunneling so that all SSL VPN traffic goes through the FortiGate.
6. Configure SSL VPN settings.
a. Go to VPN > SSL-VPN Settings.
b. Select the Listen on Interface(s), in this example, wan1.
c. Set Listen on Port to 10443.
d. Set Server Certificate to the authentication certificate.
e. Enable Require Client Certificate.
f. Under Authentication/Portal Mapping, set default Portal web-access for All Other Users/Groups.
g. Create new Authentication/Portal Mapping for group sslvpngroup mapping portal full-access.
7. Configure SSL VPN firewall policy.
a. Go to Policy & Objects > Firewall Policy.
b. Fill in the firewall policy name. In this example, sslvpn certificate auth.
c. Incoming interface must be SSL-VPN tunnel interface(ssl.root).
FortiOS 6.4.2 Administration Guide 1493
Fortinet Inc.
VPN
d. Set the Source Address to all and Source User to sslvpngroup.
e. Set the Outgoing Interface to the local network interface so that the remote user can access the internal
network. In this example, port1.
f. Set Destination Address to the internal protected subnet 192.168.1.0.
g. Set Schedule to always, Service to ALL, and Action to Accept.
h. Enable NAT.
i. Configure any remaining firewall and security options as desired.
j. Click OK.
To configure SSL VPN using the CLI:
1. Configure the interface and firewall address.
config system interface
edit "wan1"
set vdom "root"
set ip 172.20.120.123 255.255.255.0
next
end
2. Configure internal interface and protected subnet., then connect the port1 interface to the internal network.
config system interface
edit "port1"
set vdom "root"
set ip 192.168.1.99 255.255.255.0
next
end
config firewall address
edit "192.168.1.0"
set subnet 192.168.1.0 255.255.255.0
next
end
3. Install the CA certificate.
The server certificate is used for encrypting SSL VPN traffic and will be used for authentication. It is easier to install
the server certificate from GUI. However, CLI can import a p12 certificate from a tftp server.
If you want to import a p12 certificate, put the certificate server_certificate.p12 on your tftp server, then run following
command on the FortiGate.
execute vpn certificate local import tftp server_certificate.p12 <your tftp_server> p12
<your password for PKCS12 file>
To check server certificate is installed:
show vpn certificate local server_certificate
4. Install the CA certificate.
The CA certificate is the certificate that signed both the server certificate and the user certificate. In this example, it
is used to authenticate SSL VPN users.
It is easier to install the server certificate from GUI. However, CLI can import a CA certificates from a tftp server.
If you want to import a CA certificate, put the CA certificate on your tftp server, then run following command on the
FortiGate.
execute vpn certificate ca import tftp <your CA certificate name> <your tftp server>
FortiOS 6.4.2 Administration Guide 1494
Fortinet Inc.
VPN
To check that a new CA certificate is installed:
show vpn certificate ca
5. Configure PKI users and a user group.
config user peer
edit pki01
set ca CA_Cert_1
set subject User01
set two-factor enable
set passwd <your-password>
next
end
config user group
edit "sslvpngroup"
set member "pki01"
next
end
6. Configure SSL VPN web portal.
config vpn ssl web portal
edit "full-access"
set tunnel-mode enable
set web-mode enable
set ip-pools "SSLVPN_TUNNEL_ADDR1"
set split-tunneling disable
next
end
7. Configure SSL VPN settings.
config vpn ssl settings
set servercert "server_certificate"
set tunnel-ip-pools "SSLVPN_TUNNEL_ADDR1"
set source-interface "wan1"
set source-address "all"
set default-portal "web-access"
set reqclientcert enable
config authentication-rule
edit 1
set groups "sslvpngroup"
set portal "full-access"
next
end
end
8. Configure one SSL VPN firewall policy to allow remote user to access the internal network.
config firewall policy
edit 1
set name "sslvpn web mode access"
set srcintf "ssl.root"
set dstintf "port1"
set srcaddr "all"
set dstaddr "192.168.1.0"
set groups “sslvpngroup”
set action accept
FortiOS 6.4.2 Administration Guide 1495
Fortinet Inc.
VPN
set schedule "always"
set service "ALL"
set nat enable
next
end
Installation
To use the user certificate, you must first install it on the user’s PC. When the user tries to authenticate, the user
certificate is checked against the CA certificate to verify that they match.
Every user should have a unique user certificate. This allows you to distinguish each user and revoke a specific user’s
certificate, such as if a user no longer has VPN access.
To install the user certificate on Windows 7, 8, and 10:
1. Double-click the certificate file to open the Import Wizard.
2. Use the Import Wizard to import the certificate into the Personal store of the current user.
To install the user certificate on Mac OS X:
1. Open the certificate file, to open Keychain Access.
2. Double-click the certificate.
3. Expand Trust and select Always Trust.
To see the results of tunnel connection:
1. Download FortiClient from www.forticlient.com.
2. Open the FortiClient Console and go to Remote Access > Configure VPN.
3. Add a new connection.
l Set VPN Type to SSL VPN.
l Set Remote Gateway to the IP of the listening FortiGate interface, in this example, 172.20.120.123.
4. Select Customize Port and set it to 10443.
5. Enable Client Certificate and select the authentication certificate.
6. Save your settings.
7. Use the credentials you've set up to connect to the SSL VPN tunnel.
If the certificate is correct, you can connect.
To see the results of web portal:
1. In a web browser, log into the portal http://172.20.120.123:10443.
A message requests a certificate for authentication.
2. Select the user certificate.
3. Enter your user credentials.
If the certificate is correct, you can connect to the SSL VPN web portal.
FortiOS 6.4.2 Administration Guide 1496
Fortinet Inc.
VPN
To check the SSL VPN connection using the GUI:
1. Go to VPN > Monitor > SSL-VPN Monitor to verify the list of SSL users.
2. Go to Log & Report > Events and select VPN Events from the event type dropdown list to view the details for the
SSL connection log.
To check the SSL VPN connection using the CLI:
get vpn ssl monitor
SSL VPN Login Users:
Index User Auth Type Timeout From HTTP in/out HTTPS in/out
0 pki01,cn=User01 1(1) 229 10.1.100.254 0/0 0/0
1 pki01,cn=User01 1(1) 291 10.1.100.254 0/0 0/0
SSL VPN sessions:
Index User Source IP Duration I/O Bytes Tunnel/Dest IP
0 pki01,cn=User01 10.1.100.254 9 22099/43228 10.212.134.200
Dynamic address support for SSL VPN policies
Dynamic SSO user groups can be used in place of address objects when configuring SSL VPN policies. This allows
dynamic IP addresses to be used in SSL VPN policies. A remote user group can be used for authentication while an
FSSO group is separately used for authorization. Using a dummy policy for remote user authentication and a policy for
FSSO group authorization, FSSO can be used with SSL VPN tunnels
This image shows the authentication and authorization flow:
FortiOS 6.4.2 Administration Guide 1497
Fortinet Inc.
VPN
In this example, FortiAuthenticator is used as a RADIUS server. It uses a remote AD/LDAP server for authentication,
then returns the authentication results to the FortiGate. This allows the client to have a dynamic IP address after
successful authentication.
First, on the LDAP server, create two users each in their own group, user142 in group pc_group1, and user143 in group
pc_group2.
Configure the FortiAuthenticator
To add a remote LDAP server and users on the FortiAuthenticator:
1. Go to Authentication > Remote Auth. Servers > LDAP.
2. Click Create New.
3. Set the following:
l Name: ad_ldap_60
l Primary server name/IP: 172.16.200.60
l Base distinguished name: dc=fsso-qa,dc=com
l Bind type: Regular
l Username: cn=administrator,cn=User
l Password: <enter a password>
4. Click OK.
5. Edit the new LDAP server.
6. Import the remote LDAP users.
7. Edit each user to confirm that they have the RADIUS attribute Acct-Interim-Interval. This attribute is used by
FortiOS 6.4.2 Administration Guide 1498
Fortinet Inc.
VPN
FortiGate to send interim update account messages to the RADIUS server.
To create a RADIUS client for FortiGate as a remote authentication server:
1. Go to Authentication > RADIUS Service > Clients.
2. Click Create New.
3. Set the following:
l Name: fsso_ldap
l Client address: Range 172.16.200.1~172.16.200.10
l Secret: <enter a password>
4. In the Realms table, set the realm to the LDAP server that was just added: ad_ldap_60.
5. Click OK.
FortiAuthenticator can now be used as a RADIUS server, and the authentication credentials all come from the
DC/LDAP server.
Fortinet Single Sign-On Collector Agent
To configure the Fortinet Single Sign-On Collector Agent:
1. Select Require authenticated connection from FortiGate and enter a Password.
2. Click Advanced Settings.
3. Select the RADIUS Accounting tab.
FortiOS 6.4.2 Administration Guide 1499
Fortinet Inc.
VPN
4. Select Enable RADIUS accounting server and set the Shared secret.
5. Click OK, then click Save&close.
The collector agent can now accept accounting requests from FortiGate, and retrieve the IP addresses and
usernames of SSL VPN client from the FortiGate with accounting request messages.
Configure the FortiGate
To configure the FortiGate in the CLI:
1. Create a Fortinet Single Sign-On Agent fabric connector:
config user fsso
edit "AD_CollectAgent"
set server "172.16.200.60"
set password 123456
next
end
2. Add the RADIUS server:
config user radius
edit "rad150"
set server "172.16.200.150"
set secret 123456
set acct-interim-interval 600
config accounting-server
edit 1
set status enable
set server "172.16.200.60"
set secret 123456
next
end
next
end
3. Create a user group for the RADIUS server:
config user group
edit "rad_group"
set member "rad150"
next
end
FortiOS 6.4.2 Administration Guide 1500
Fortinet Inc.
VPN
4. Create user groups for each of the FSSO groups:
config user group
edit "fsso_group1"
set group-type fsso-service
set member "CN=PC_GROUP1,OU=TESTING,DC=FSSO-QA,DC=COM"
next
edit "fsso_group2"
set group-type fsso-service
set member "CN=PC_GROUP2,OU=TESTING,DC=FSSO-QA,DC=COM"
next
end
5. Create an SSL VPN portal and assign the RADIUS user group to it:
config vpn ssl web portal
edit "testportal"
set tunnel-mode enable
set ipv6-tunnel-mode enable
set web-mode enable
...
next
end
config vpn ssl settings
...
set default-portal "full-access"
config authentication-rule
edit 1
set groups "rad_group"
set portal "testportal"
next
end
end
6. Create firewall addresses:
config firewall address
edit "none"
set subnet 0.0.0.0 255.255.255.255
next
edit "pc4"
set subnet 172.16.200.44 255.255.255.255
next
edit "pc5"
set subnet 172.16.200.55 255.255.255.255
next
end
7. Create one dummy policy for authentication only, and two normal policies for authorization:
config firewall policy
edit 1
set name "sslvpn_authentication"
set srcintf "ssl.vdom1"
set dstintf "port1"
set srcaddr "all"
set dstaddr "none"
set action accept
set schedule "always"
FortiOS 6.4.2 Administration Guide 1501
Fortinet Inc.
VPN
set service "ALL"
set logtraffic all
set groups "rad_group"
set nat enable
next
edit 3
set name "sslvpn_authorization1"
set srcintf "ssl.vdom1"
set dstintf "port1"
set srcaddr "all"
set dstaddr "pc4"
set action accept
set schedule "always"
set service "ALL"
set logtraffic all
set groups "fsso_group1"
set nat enable
next
edit 4
set name "sslvpn_authorization2"
set srcintf "ssl.vdom1"
set dstintf "port1"
set srcaddr "all"
set dstaddr "pc5"
set action accept
set schedule "always"
set service "ALL"
set logtraffic all
set groups "fsso_group2"
set nat enable
next
end
To create an FSSO agent fabric connector in the GUI:
1. Go to Security Fabric > External Connectors.
2. Click Create New.
3. Click Fortinet Single Sign-On Agent.
4. Enter the name and Primary FSSO agent information.
5. Click Apply & Refresh.
The FSSO groups are retrieved from the collector agent.
FortiOS 6.4.2 Administration Guide 1502
Fortinet Inc.
VPN
To add the RADIUS server in the GUI:
1. Go to User & Authentication > RADIUS Servers.
2. Click Create New.
3. Enter a name for the server.
4. Enter the IP/Name and Secret for the primary server.
5. Click Test Connectivity to ensure that there is a successful connection.
6. Click OK.
7. Configure an accounting server with the following CLI command:
config user radius
edit rad150
set acct-interim-interval 600
config accounting-server
edit 1
set status enable
set server 172.16.200.60
set secret *********
next
end
next
end
To create a user group for the RADIUS server in the GUI:
1. Go to User & Authentication > User Groups.
2. Click Create New.
3. Enter a name for the group and set the Type to Firewall.
FortiOS 6.4.2 Administration Guide 1503
Fortinet Inc.
VPN
4. Add the RADIUS server as a remote group.
5. Click OK.
To create user groups for each of the FSSO groups in the GUI:
1. Go to User & Authentication > User Groups.
2. Click Create New.
3. Enter a name for the group and set the Type to Fortinet Single Sign-On (FSSO).
4. Add PC_GROUP1 as a member:
CN=PC_GROUP1,OU=TESTING,DC=FSSO-QA,DC=COM
5. Click OK.
6. Add a second user group with PC_GROUP2 as a member:
CN=PC_GROUP1,OU=TESTING,DC=FSSO-QA,DC=COM
7. Click OK.
To create an SSL VPN portal and assign the RADIUS user group to it in the GUI:
1. Go to VPN > SSL VPN Portals.
2. Click Create New.
3. Configure the portal, then click OK.
4. Go to VPN > SSL VPN Settings.
5. Configure the required settings.
FortiOS 6.4.2 Administration Guide 1504
Fortinet Inc.
VPN
6. Create an Authentication/Portal Mapping table entry:
a. Click Create New.
b. Set User/Groups to rad_group.
c. Set Portal to testportal.
d. Click OK.
7. Click OK.
To create policies for authentication and authorization in the GUI:
1. Go to Policy & Object > Firewall Policy.
2. Configure a dummy policy for authentication. Set the destination to none so that traffic is not allowed through the
FortiGate, and add rad_group as a source.
3. Configure two authorization policies, with the FSSO groups as sources.
Confirmation
On Client 1, log in to FortiClient using user142. Traffic can go to pc4 (172.16.200.44), but cannot go to pc5
(172.16.200.55).
On Client 2, log in to FortiClient using user143. Traffic can go to pc5 (172.16.200.55), but cannot go to pc4
(172.16.200.44).
On the FortiGate, check the authenticated users list and the SSL VPN status:
# diagnose firewall auth list
10.212.134.200, USER142
type: fsso, id: 0, duration: 173, idled: 173
server: AD_CollectAgent
packets: in 0 out 0, bytes: in 0 out 0
user_id: 16777229
group_id: 3 33554434
group_name: fsso_group1 CN=PC_GROUP1,OU=TESTING,DC=FSSO-QA,DC=COM
10.212.134.200, user142
type: fw, id: 0, duration: 174, idled: 174
expire: 259026, allow-idle: 259200
flag(80): sslvpn
server: rad150
packets: in 0 out 0, bytes: in 0 out 0
group_id: 4
group_name: rad_group
10.212.134.201, USER143
type: fsso, id: 0, duration: 78, idled: 78
FortiOS 6.4.2 Administration Guide 1505
Fortinet Inc.
VPN
server: AD_CollectAgent
packets: in 0 out 0, bytes: in 0 out 0
group_id: 1 33554435
group_name: fsso_group2 CN=PC_GROUP2,OU=TESTING,DC=FSSO-QA,DC=COM
10.212.134.201, user143
type: fw, id: 0, duration: 79, idled: 79
expire: 259121, allow-idle: 259200
flag(80): sslvpn
server: rad150
packets: in 0 out 0, bytes: in 0 out 0
group_id: 4
group_name: rad_group
----- 4 listed, 0 filtered ------
# get vpn ssl monitor
SSL VPN Login Users:
Index User Auth Type Timeout From HTTP in/out HTTPS in/out
0 user142 2(1) 600 10.1.100.145 0/0 0/0
1 user143 2(1) 592 10.1.100.254 0/0 0/0
SSL VPN sessions:
Index User Source IP Duration I/O Bytes Tunnel/Dest IP
0 user142 10.1.100.145 104 32190/16480 10.212.134.200
1 user143 10.1.100.254 11 4007/4966 10.212.134.201
SSL VPN multi-realm
This sample shows how to create a multi-realm SSL VPN that provides different portals for different user groups.
Sample topology
FortiOS 6.4.2 Administration Guide 1506
Fortinet Inc.
VPN
Sample configuration
WAN interface is the interface connected to ISP. This example shows static mode. You can also use DHCP or PPPoE
mode. The SSL VPN connection is established over the WAN interface.
The split tunneling routing address cannot explicitly use an FQDN or an address group that
includes an FQDN. To use an FQDN, leave the routing address blank and apply the FQDN as
the destination address of the firewall policy.
To configure SSL VPN using the GUI:
1. Configure the interface and firewall address. The port1 interface connects to the internal network.
a. Go to Network > Interfaces and edit the wan1 interface.
b. Set IP/Network Mask to 172.20.120.123/255.255.255.0.
c. Edit port1 interface and set IP/Network Mask to 192.168.1.99/255.255.255.0.
d. Click OK.
e. Go to Policy & Objects > Address and create an address for internet QA_subnet with subnet 192.168.1.0/24
and HR_subnet with subnet 10.1.100.0/24.
2. Configure user and user group.
a. Go to User & Authentication > User Definition to create local users qa-user1 and hr-user1.
b. Go to User & Authentication > User Groups to create separate user groups for web-only and full-access
portals:
l QA_group with member qa-user1.
l HR_group with the member hr-user1.
3. Configure SSL VPN web portal.
a. Go to VPN > SSL-VPN Portals to create portal qa-tunnel.
b. Enable Tunnel Mode.
c. Create a portal hr-web with Web Mode enabled.
4. Configure SSL VPN realms.
a. Go to System > Feature Visibility to enable SSL-VPN Realms.
b. Go to VPN > SSL-VPN Realms to create realms for qa and hr.
c. (Optional) To access each realm with FQDN instead of the default URLs https://172.20.120.123:10443/hr and
https://172.20.120.123:10443/qa, you can configure a virtual-host for the realm in the CLI.
config vpn ssl web realm
edit hr
set virtual-host hr.mydomain.com
next
edit qa
set virtual-host qa.mydomain.com
next
end
Where mydomain.com is the name of your domain. Ensure FQDN resolves to the FortiGate wan1 interface
and that your certificate is a wildcard certificate.
5. Configure SSL VPN settings.
a. Go to VPN > SSL-VPN Settings.
b. For Listen on Interface(s), select wan1.
c. Set Listen on Port to 10443.
d. Choose a certificate for Server Certificate. The default is Fortinet_Factory.
FortiOS 6.4.2 Administration Guide 1507
Fortinet Inc.
VPN
e. In Authentication/Portal Mapping All Other Users/Groups, set the Portal to web-access.
f. Create new Authentication/Portal Mapping for group QA_group mapping portal qa-tunnel.
g. Specify the realm qa.
h. Add another entry for group HR_group mapping portal hr-web.
i. Specify the realm hr.
6. Configure SSL VPN firewall policy.
a. Go to Policy & Objects > Firewall Policy.
b. Create a firewall policy for QA access.
c. Fill in the firewall policy name. In this example, QA sslvpn tunnel mode access.
d. Incoming interface must be SSL-VPN tunnel interface(ssl.root).
e. Choose an Outgoing Interface. In this example, port1.
f. Set the Source to all and group to QA_group.
g. In this example, the Destination is the internal protected subnet QA_subnet.
h. Set Schedule to always, Service to ALL, and Action to Accept.
i. Click OK.
j. Create a firewall policy for HR access.
k. Fill in the firewall policy name. In this example, HR sslvpn web mode access.
l. Incoming interface must be SSL-VPN tunnel interface(ssl.root).
m. Choose an Outgoing Interface. In this example, port1.
n. Set the Source to all and group to HR_group.
o. In this example, the Destination is the internal protected subnet HR_subnet.
p. Set Schedule to always, Service to ALL, and Action to Accept.
q. Click OK.
To configure SSL VPN using the CLI:
1. Configure the interface and firewall address.
config system interface
edit "wan1"
set vdom "root"
set ip 172.20.120.123 255.255.255.0
next
end
2. Configure internal interface and protected subnet, then connect the port1 interface to the internal network.
config system interface
edit "port1"
set vdom "root"
set ip 192.168.1.99 255.255.255.0
next
end
config firewall address
edit "QA_subnet"
set subnet 192.168.1.0 255.255.255.0
next
edit "HR_subnet"
set subnet 10.1.100.0 255.255.255.0
FortiOS 6.4.2 Administration Guide 1508
Fortinet Inc.
VPN
next
end
3. Configure user and user group.
config user local
edit "qa_user1"
set type password
set passwd your-password
next
end
config user group
edit "QA_group"
set member "qa_user1"
next
end
config user local
edit "hr_user1"
set type password
set passwd your-password
next
end
config user group
edit "HR_group"
set member "hr_user1"
next
end
4. Configure SSL VPN web portal.
config vpn ssl web portal
edit "qa-tunnel"
set tunnel-mode enable
set ip-pools "SSLVPN_TUNNEL_ADDR1"
set split-tunneling enable
set split-tunneling-routing-address "QA_subnet"
next
end
config vpn ssl web portal
edit "hr-web"
set web-mode enable
next
end
5. Configure SSL VPN realms.
config vpn ssl web realm
edit hr
set virtual-host hr.mydomain.com
next
edit qa
set virtual-host qa.mydomain.com
next
end
The set virtual-host setting is optional. For example:
config vpn ssl web realm
edit hr
next
FortiOS 6.4.2 Administration Guide 1509
Fortinet Inc.
VPN
edit qa
next
end
6. Configure SSL VPN settings.
config vpn ssl settings
set servercert "Fortinet_Factory"
set tunnel-ip-pools "SSLVPN_TUNNEL_ADDR1"
set tunnel-ipv6-pools "SSLVPN_TUNNEL_IPv6_ADDR1"
set source-interface "wan1"
set source-address "all"
set source-address6 "all"
set default-portal "full-access"
config authentication-rule
edit 1
set groups "QA_group"
set portal "qa-tunnel"
set realm qa
next
edit 2
set groups "HR_group"
set portal "hr-web"
set realm hr
next
end
end
7. Configure two SSL VPN firewall policies to allow remote QA user to access internal QA network and HR user to
access HR network.
config firewall policy
edit 1
set name "QA sslvnpn tunnel access"
set srcintf "ssl.root"
set dstintf "port1"
set srcaddr "all"
set dstaddr "QA_subnet"
set groups “QA_group”
set action accept
set schedule "always"
set service "ALL"
next
edit 2
set name "HR sslvpn web access"
set srcintf "ssl.root"
set dstintf "port1"
set srcaddr "all"
set dstaddr "HR_subnet"
set groups “HR_group”
set action accept
set schedule "always"
set service "ALL"
next
end
FortiOS 6.4.2 Administration Guide 1510
Fortinet Inc.
VPN
To see the results for QA user:
1. Download FortiClient from www.forticlient.com.
2. Open the FortiClient Console and go to Remote Access.
3. Add a new connection.
l Set VPN Type to SSL VPN.
l Set Remote Gateway to https://172.20.120.123:10443/qa..
l If a virtual-host is specified, use the FQDN defined for the realm (qa.mydomain.com).
4. Select Customize Port and set it to 10443.
5. Save your settings.
6. Use the credentials you've set up to connect to the SSL VPN tunnel.
If the user's computer has antivirus software, a connection is established; otherwise FortiClient shows a compliance
warning.
7. After connection, traffic to subnet 192.168.1.0 goes through the tunnel.
8. On the FortiGate, go to Dashboard > Network and expand the SSL-VPN widget to verify the list of SSL users.
9. On the FortiGate, go to VPN > Monitor > SSL-VPN Monitor to verify the list of SSL users.
10. On the FortiGate, go to Log & Report > Forward Traffic and view the details of the traffic.
To see the results for HR user:
1. In a web browser, log into the portal https://172.20.120.123:10443/hr using the credentials you've set up.
2. Alternatively, if a virtual-host is specified, use the FQDN defined for the realm (hr.mydomain.com).
3. On the FortiGate, go to Dashboard > Network and expand the SSL-VPN widget to verify the list of SSL users.
4. Go to Log & Report > Forward Traffic and view the details of the traffic.
NAS-IP support per SSL-VPN realm
For RADIUS authentication and authorization, the RADIUS client (the FortiGate) passes the username, password, and
NAS-IP to the RADIUS server in its access request. The RADIUS server authenticates and authorizes based on this
information. Each RADIUS server can be configured with multiple NAS-IPs for authenticating different groups and NAS
clients.
On the FortiGate, configuring the NAS-IP in the realm settings overrides the RADIUS server setting, allowing multiple
NAS-IPs to be mapped to the same RADIUS server.
In this example, the user wants to present one FortiGate VDOM with different NAS-IPs to a single RADIUS server based
on specific rules.
FortiOS 6.4.2 Administration Guide 1511
Fortinet Inc.
VPN
To configure the SSL-VPN to use the NAS-IP in the realm settings:
1. Configure a RADIUS user and add it to a group:
config user radius
edit "fac150"
set server "172.16.200.150"
set secret ********
set nas-ip 172.16.200.2
config accounting-server
edit 1
set status enable
set server "172.16.200.150"
set secret ********
next
end
next
end
config user group
edit "radgrp"
set member "fac150"
next
end
2. Configure a realm for the user with a different NAS-IP:
config vpn ssl web realm
edit "realm1"
set login-page '.......'
set radius-server "fac150"
set nas-ip 10.1.100.2
next
end
3. Configure SSL-VPN with an authentication rule that includes the user group and the realm:
config vpn ssl settings
...
config authentication-rule
edit 1
set groupd "radgrp"
set portal "testportal1"
set realm "realm1"
next
end
end
4. Create a firewall policy:
config firewall policy
edit 1
set name "sslvpn1"
...
set srcintf "ssl.vdom1"
set groups "radgrp"
next
end
Because the RADIUS server and NAS-IP are specified in realm1, its NAS-IP is used for authentication.
FortiOS 6.4.2 Administration Guide 1512
Fortinet Inc.
VPN
SSL VPN to IPsec VPN
This is a sample configuration of site-to-site IPsec VPN that allows access to the remote endpoint via SSL VPN.
This example uses a pre-existing user group, a tunnel mode SSL VPN with split tunneling, and a route-based IPsec VPN
between two FortiGates. All sessions must start from the SSL VPN interface.
If you want sessions to start from the FGT_2 subnet, you need more policies. Also, if the remote subnet is beyond FGT_
2 (if there are multiple hops), you need to include the SSL VPN subnet in those routers as well.
Sample topology
FortiOS 6.4.2 Administration Guide 1513
Fortinet Inc.
VPN
Sample configuration
To configure the site-to-site IPsec VPN on FGT_1:
1. Go to VPN > IPsec Wizard.
2. In the VPN Setup pane:
a. Specify the VPN connection Name as to_FGT_2.
b. Select Site to Site.
c. Click Next.
3. In the Authentication pane:
a. Enter the IP Address to the Internet-facing interface.
b. For Authentication Method, click Pre-shared Key and enter the Pre-shared Key.
c. Click Next.
4. In the Policy & Routing pane:
a. Set the Local Interface to the internal interface.
b. Set the Local Subnets to include the internal and SSL VPN subnets for FGT_1.
c. Set Remote Subnets to include the internal subnet for FGT_2.
FortiOS 6.4.2 Administration Guide 1514
Fortinet Inc.
VPN
d. Click Create.
A confirmation screen shows a summary of the configuration including the firewall address groups for both the local and
remote subnets, static routes, and security policies.
To configure SSL VPN settings:
1. Go to VPN > SSL-VPN Settings.
2. Set Listen on Interface(s) to wan1.
3. To avoid port conflicts, set Listen on Port to 10443.
4. For Restrict Access, select Allow access from any host.
5. In the Tunnel Mode Client Settings section, select Specify custom IP ranges and include the SSL VPN subnet range
created by the IPsec Wizard.
6. In the Authentication/Portal Mapping section, add the VPN user group to the tunnel-access Portal. Set All Other
Users/Groups to the web-access Portal.
FortiOS 6.4.2 Administration Guide 1515
Fortinet Inc.
VPN
It is HIGHLY recommended that you acquire a signed certificate for you installation.
Please review the SSL VPN best practices on page 1411 and learn how to Purchase and
import a signed SSL certificate on page 827.
7. Click Apply.
To configure SSL VPN portal:
1. Go to VPN > SSL-VPN Portals.
2. Select tunnel-access and click Edit.
3. Turn on Enable Split Tunneling so that only traffic intended for the local or remote networks flow through FGT_1 and
follows corporate security profiles.
4. For Routing Address, add the local and remote IPsec VPN subnets created by the IPsec Wizard.
FortiOS 6.4.2 Administration Guide 1516
Fortinet Inc.
VPN
5. For Source IP Pools, add the SSL VPN subnet range created by the IPsec Wizard.
6. Click OK.
To add policies to FGT_1:
1. Go to Policy & Objects > Firewall Policy.
2. Click Create New to create a policy that allows SSL VPN users access to the IPsec VPN tunnel.
3. For Incoming Interface, select ssl.root.
4. For Outgoing Interface, select the IPsec tunnel interface to_FGT_2.
5. Set the Source to all and the VPN user group.
6. Set Destination to the remote IPsec VPN subnet.
7. Specify the Schedule.
8. Set the Service to ALL.
FortiOS 6.4.2 Administration Guide 1517
Fortinet Inc.
VPN
9. In the Firewall/Network Options section, disable NAT.
10. Click OK.
To configure the site-to-site IPsec VPN on FGT_2:
1. Go to VPN > IPsec Wizard.
2. In the VPN Setup pane:
a. Specify the VPN connection Name as to FGT_1.
b. Select Site to Site.
c. Click Next.
3. In the Authentication pane:
a. Enter the IP Address to the Internet-facing interface.
b. For Authentication Method, click Pre-shared Key and enter the Pre-shared Key of the FGT_1.
FortiOS 6.4.2 Administration Guide 1518
Fortinet Inc.
VPN
c. Click Next.
4. In the Policy & Routing pane:
a. Set the Local Interface to the internal interface.
b. Set the Local Subnets to include the internal and SSL VPN subnets for FGT_2.
c. Set Remote Subnets to include the internal subnet for FGT_1.
d. Click Create.
A confirmation screen shows a summary of the configuration including the firewall address groups for both the local and
remote subnets, static routes, and security policies.
FortiOS 6.4.2 Administration Guide 1519
Fortinet Inc.
VPN
To check the results:
1. Go to Monitor > IPsec Monitor.
2. Select the tunnel and click Bring Up.
3. Verify that the Status changes to Up.
4. Configure the SSL VPN connection on the user's FortiClient and connect to the tunnel.
5. On the user's computer, use CLI to send a ping though the tunnel to the remote endpoint to confirm access.
FortiOS 6.4.2 Administration Guide 1520
Fortinet Inc.
VPN
6. Go to Monitor > Routing Monitor and verify that the routes for the IPsec and SSL VPNs are added.
7. Go to Monitor > SSL-VPN Monitor and verify user connectivity.
8. Go to Log & Report > Events, select VPN Events from the event type dropdown list, and view the IPsec and SSL
tunnel statistics.
FortiOS 6.4.2 Administration Guide 1521
Fortinet Inc.
VPN
9. Go to VPN > VPN Location Map and view VPN connection activity.
10. Go to FortiView > Policies and view policy usage.
Troubleshooting
To troubleshoot on FGT_1, use the following CLI commands:
diagnose debug reset
diagnose debug flow show function-name enable
diagnose debug flow show iprope enable
diagnose debug flow filter addr 172.16.200.55
diagnose debug flow filter proto 1
diagnose debug flow trace start 2
diagnose debug enable
To troubleshoot using ping:
1. Send a ping through the SSL VPN tunnel to 172.16.200.55 and analyze the output of the debug.
2. Disable the debug output with this command: diagnose debug disable.
If traffic is entering the correct VPN tunnel on FGT_1, then run the same commands on FGT_2 to check whether the
traffic is reaching the correct tunnel. If it is reaching the correct tunnel, confirm that the SSL VPN tunnel range is
configured in the remote side quick mode selectors.
FortiOS 6.4.2 Administration Guide 1522
Fortinet Inc.
VPN
To troubleshoot using a sniffer command:
diagnose sniff packet any "host 172.16.200.44 and icmp" 4
To troubleshoot IPsec VPN issues, use the following commands on either FortiGate:
diagnose debug reset
diagnose vpn ike gateway clear
diagnose debug application ike -1
diagnose debug enable
SSL VPN protocols
The following topics provide information about SSL VPN protocols:
l TLS 1.3 support on page 1523
l SMBv2 support on page 1524
TLS 1.3 support
FortiOS supports TLS 1.3 for SSL VPN.
TLS 1.3 support requires IPS engine 4.205 or later and endpoints running FortiClient 6.2.0 or
later.
To establish a client SSL VPN connection with TLS 1.3 to the FortiGate:
1. Enable TLS 1.3 support using the CLI:
config vpn ssl setting
set ssl-max-proto-ver tls1-3
set ssl-min-proto-ver tls1-3
end
2. Configure the SSL VPN and firewall policy:
a. Configure the SSL VPN settings and firewall policy as needed.
3. For Linux clients, ensure OpenSSL 1.1.1a is installed:
a. Run the following commands in the Linux client terminal:
root@PC1:~/tools# openssl
OpenSSL> version
If OpenSSL 1.1.1a is installed, the system displays a response like the following:
OpenSSL 1.1.1a 20 Nov 2018
4. For Linux clients, use OpenSSL with the TLS 1.3 option to connect to SSL VPN:
a. Run the following command in the Linux client terminal:
#openssl s_client -connect 10.1.100.10:10443 -tls1_3
5. Ensure the SSL VPN connection is established with TLS 1.3 using the CLI:
# diagnose debug application sslvpn -1
# diagnose debug enable
The system displays a response like the following:
[207:root:1d]SSL established: TLSv1.3 TLS_AES_256_GCM_SHA384
FortiOS 6.4.2 Administration Guide 1523
Fortinet Inc.
VPN
Deep inspection (flow-based)
FortiOS supports TLS 1.3 for policies that have the following security profiles applied:
l Web filter profile with flow-based inspection mode enabled.
l Deep inspection SSL/SSH inspection profile.
For example, when a client attempts to access a website that supports TLS 1.3, FortiOS sends the traffic to the IPS
engine. The IPS engine then decodes TLS 1.3 and the client is able to access the website.
SMBv2 support
On all FortiGate models, SMBv2 is enabled by default for SSL VPN. Client PCs can access the SMBv2 server using SSL
VPN web-only mode.
To configure SMBv2:
1. Set the minimum and maximum SMB versions.
config vpn ssl web portal
edit portal-name
set smb-min-version smbv2
set smb-max-version smbv3
next
end
2. Configure SSL VPN and firewall policies as usual.
3. Connect to the SSL VPN web portal and create an SMB bookmark for the SMBv2 server.
4. Click the bookmark to connect to the SMBv2 server.
5. On the FortiGate, use package capture to verify that SMBv2 works:
SSL VPN troubleshooting
The following topics provide information about SSL VPN troubleshooting:
l Debug commands on page 1524
l Troubleshooting common issues on page 1525
Debug commands
SSL VPN debug command
Use the following diagnose commands to identify SSL VPN issues. These commands enable debugging of SSL VPN
with a debug level of -1 for detailed results.
diagnose debug application sslvpn -1
diagnose debug enable
The CLI displays debug output similar to the following:
FortiOS 6.4.2 Administration Guide 1524
Fortinet Inc.
VPN
FGT60C3G10002814 # [282:root]SSL state:before/accept initialization (172.20.120.12)
[282:root]SSL state:SSLv3 read client hello A (172.20.120.12)
[282:root]SSL state:SSLv3 write server hello A (172.20.120.12)
[282:root]SSL state:SSLv3 write change cipher spec A (172.20.120.12)
[282:root]SSL state:SSLv3 write finished B (172.20.120.12)
[282:root]SSL state:SSLv3 flush data (172.20.120.12)
[282:root]SSL state:SSLv3 read finished A:system lib(172.20.120.12)
[282:root]SSL state:SSLv3 read finished A (172.20.120.12)
[282:root]SSL state:SSL negotiation finished successfully (172.20.120.12)
[282:root]SSL established: DHE-RSA-AES256-SHA SSLv3 Kx=DH Au=RSA Enc=AES(256) Mac=SHA1
To disable the debug:
diagnose debug disable
diagnose debug reset
Remote user authentication debug command
Use the following diagnose commands to identify remote user authentication issues.
diagnose debug application fnbamd -1
diagnose debug reset
Troubleshooting common issues
To troubleshoot getting no response from the SSL VPN URL:
1. Go to VPN > SSL-VPN Settings.
a. Check the SSL VPN port assignment.
b. Check the Restrict Access setting to ensure the host you are connecting from is allowed.
2. Go to Policy > Firewall Policy.
a. Check that the policy for SSL VPN traffic is configured correctly.
b. Check the URL you are attempting to connect to. It should follow this pattern:
https://<FortiGate IP>:<Port>
c. Check that you are using the correct port number in the URL. Ensure FortiGate is reachable from the computer.
ping <FortiGate IP>
d. Check the browser has TLS 1.1, TLS 1.2, and TLS 1.3 enabled.
To troubleshoot FortiGate connection issues:
1. Check the Release Notes to ensure that the FortiClient version is compatible with your version of FortiOS.
2. FortiClient uses IE security setting, In IE Internet options > Advanced > Security, check that Use TLS 1.1 and Use
TLS 1.2 are enabled.
3. Check that SSL VPN ip-pools has free IPs to sign out. The default ip-poolsSSLVPN_TUNNEL_ADDR1 has 10 IP
addresses.
4. Export and check FortiClient debug logs.
a. Go to File > Settings.
b. In the Logging section, enable Export logs.
c. Set the Log Level to Debug and select Clear logs.
FortiOS 6.4.2 Administration Guide 1525
Fortinet Inc.
VPN
d. Try to connect to the VPN.
e. When you get a connection error, select Export logs.
To troubleshoot SSL VPN hanging or disconnecting at 98%:
1. A new SSL VPN driver was added to FortiClient 5.6.0 and later to resolve SSL VPN connection issues. If your
FortiOS version is compatible, upgrade to use one of these versions.
2. Latency or poor network connectivity can cause the login timeout on the FortiGate. In FortiOS 5.6.0 and later, use
the following commands to allow a user to increase the SSL VPN login timeout setting.
config vpn ssl settings
set login-timeout 180 (default is 30)
set dtls-hello-timeout 60 (default is 10)
end
To troubleshoot tunnel mode connections shutting down after a few seconds:
This might occur if there are multiple interfaces connected to the Internet, for example, SD-WAN. This can cause the
session to become “dirty”. To allow multiple interfaces to connect, use the following CLI commands.
If you are using a FortiOS 6.0.1 or later:
config system interface
edit <name>
set preserve-session-route enable
next
end
If you are using a FortiOS 6.0.0 or earlier:
config vpn ssl settings
set route-source-interface enable
end
To troubleshoot users being assigned to the wrong IP range:
1. Go to VPN > SSL-VPN Portals and VPN > SSL-VPN Settings and ensure the same IP Pool is used in both places.
Using the same IP Pool prevents conflicts. If there is a conflict, the portal settings are used.
To troubleshoot slow SSL VPN throughput:
Many factors can contribute to slow throughput.
This recommendation tries to improve throughput by using the FortiOS Datagram Transport Layer Security (DTLS)
tunnel option, available in FortiOS 5.4 and above.
DTLS allows SSL VPN to encrypt traffic using TLS and uses UDP as the transport layer instead of TCP. This avoids
retransmission problems that can occur with TCP-in-TCP.
FortiClient 5.4.0 to 5.4.3 uses DTLS by default. FortiClient 5.4.4 and later uses normal TLS, regardless of the DTLS
setting on the FortiGate.
To use DTLS with FortiClient:
1. Go to File > Settings and enable Preferred DTLS Tunnel.
To enable DTLS tunnel on FortiGate, use the following CLI commands:
FortiOS 6.4.2 Administration Guide 1526
Fortinet Inc.
VPN
config vpn ssl settings
set dtls-tunnel enable
end
FortiOS 6.4.2 Administration Guide 1527
Fortinet Inc.
User & Authentication
In User & Authentication, you can control network access for different users and devices in your network. FortiGate
authentication controls system access by user group. By assigning individual users to the appropriate user groups you
can control each user’s access to network resources. You can define local users and peer users on the FortiGate unit.
You can also define user accounts on remote authentication servers and connect them to FortiOS.
You can control network access for different device types in your network by doing the following:
l Identifying and monitoring the types of devices connecting to your network
l Using MAC address based access control to allow or deny individual devices
l Using Telemetry data received from FortiClient endpoints to construct a policy to deny access to endpoints with
known vulnerabilities or to quarantine compromised endpoints
The following sections provide information about users and devices:
l Endpoint control and compliance on page 1528
l User Definition on page 1536
l User Groups on page 1538
l Guest Management on page 1539
l LDAP Servers on page 1542
l RADIUS Servers on page 1553
l TACACS+ servers on page 1566
l SAML on page 1568
l Authentication Settings on page 1572
l FortiTokens on page 1573
l PKI on page 1597
l Configuring the maximum log in attempts and lockout period on page 1596
l Configuring firewall authentication on page 1597
Endpoint control and compliance
The section contains the following topics:
l Per-policy disclaimer messages on page 1528
l Compliance on page 1530
l FortiGuard distribution of updated Apple certificates on page 1535
Per-policy disclaimer messages
FortiOS supports a customizable captive portal to direct users to install or enable required software.
Per-policy custom disclaimers in each VDOM are supported. For example, you may want to configure three firewall
policies, each of which matches traffic from endpoints with different FortiClient statuses:
FortiOS 6.4.2 Administration Guide 1528
Fortinet Inc.
User & Authentication
Endpoint status FortiOS behavior
Endpoint does not have FortiClient installed. Traffic matches a firewall policy that displays an in-browser warning
to install FortiClient from the provided link.
Endpoint has FortiClient installed, registered Traffic matches a dynamic firewall policy which allows the endpoint to
to EMS, and connected to the FortiGate. reach its destination via this policy.
Endpoint is deregistered from EMS and Traffic matches another dynamic firewall policy that displays warning
disconnected from the FortiGate. to register FortiClient to EMS.
To enable per-policy disclaimer messages:
config user setting
set auth-cert "Fortinet_Factory"
set per-policy-disclaimer enable
end
To configure per-policy disclaimers in the GUI:
1. Ensure the per-policy disclaimer messages option is enabled.
2. Go to Policy & Objects > Firewall Policy.
3. Edit the policy that applies when an endpoint does not have FortiClient installed.
4. Under Disclaimer Options, enable Display Disclaimer.
5. Enable Customize Messages then click Edit Disclaimer Message. The default disclaimer message is shown.
6. Edit the message to warn users to install FortiClient, and provide the FortiClient download link.
7. Click Save.
8. Repeat the above steps for each policy that requires a custom disclaimer message.
To configure per-policy disclaimers in the CLI:
config firewall policy
edit 1
FortiOS 6.4.2 Administration Guide 1529
Fortinet Inc.
User & Authentication
set name "111"
set srcintf "port12"
set dstintf "port11"
set srcaddr "all"
set dstaddr "pc155_address"
set action accept
set schedule "always"
set service "ALL"
set wsso disable
set groups "ems_03_group"
set disclaimer enable
set replacemsg-override-group "test"
set nat enable
next
edit 4
set name "44"
set srcintf "port12"
set dstintf "port11"
set srcaddr "all"
set dstaddr "pc5-address"
set action accept
set schedule "always"
set service "ALL"
set wsso disable
set groups "ems_03_group"
set disclaimer enable
set replacemsg-override-group "test2"
set nat enable
next
edit 6
set name "66"
set srcintf "port12"
set dstintf "port11"
set srcaddr "all"
set dstaddr "all"
set status disable
set schedule "always"
set service "ALL"
set logtraffic all
set fsso disable
set block-notification enable
set replacemsg-override-group "endpoint-override"
next
end
Compliance
The following topics provide information about compliance in FortiOS.
l FortiSandbox Cloud region selection on page 1531
l FortiGate VM unique certificate on page 1533
l Running a file system check automatically on page 1534
FortiOS 6.4.2 Administration Guide 1530
Fortinet Inc.
User & Authentication
FortiSandbox Cloud region selection
In FortiOS, FortiSandbox Cloud services are decoupled from the FortiGate Cloud license. This allows you to specify a
FortiSandbox Cloud region and take advantage of FortiSandbox features without a FortiGate Cloud account.
The following topology demonstrates how FortiGate Cloud Logs and FortiSandbox Cloud are separated in FortiOS:
To view the FortiGate Cloud Log and FortiSandbox licenses:
1. Go to Dashboard > Status.
2. The FortiGate Cloud widget shows separate license statuses for Log Retention and FortiSandbox Cloud.
In the following example, the FortiGate Cloud account is using a free license, and FortiSandbox Cloud is using a
paid license:
To obtain a FortiSandbox Cloud license:
1. Go to System > FortiGuard.
2. In the License Information table, find FortiSandbox Cloud and click Activate.
3. Complete the prompts to obtain your license.
The FortiSandbox Cloud license is linked to your antivirus license, so they will expire at the
same time.
FortiOS 6.4.2 Administration Guide 1531
Fortinet Inc.
User & Authentication
If the FortiGate is not registered with a paid antivirus license, the FortiGate will use the free FortiGate Cloud license.
This license limits the FortiGate to 100 FortiSandbox Cloud submissions per day.
To set the FortiSandbox Cloud region in the GUI:
1. Go to Security Fabric > Fabric Connectors and double-click the FortiSandbox Cloud card.
2. Select a region from the Region dropdown.
The following regions are available:
l Europe
l Global
l Japan
l US
3. Click OK.
To set the FortiSandbox Cloud region in the CLI:
FGT_PROXY (global) # execute forticloud-sandbox region
0 Europe
1 Global
2 Japan
3 US
Please select cloud sandbox region[0-3]:3
Cloud sandbox region is selected: US
The separation of the FortiGate Cloud Log and FortiSandbox services are visible in the following example:
FGT_PROXY (global) # diagnose test application forticldd 3
Debug zone info:
Domain:FortiCloud ReleaseQA Global - 172.16.95.16
Home log server: 172.16.95.93:514
Alt log server: 172.16.95.27:514
Active Server IP: 172.16.95.93
Active Server status: up
Log quota: 102400MB
Log used: 0MB
Daily volume: 20480MB
fams archive pause: 0
APTContract : 1
APT server: 172.16.102.52:514
APT Altserver: 172.16.102.51:514
Active APTServer IP: 172.16.102.52
Active APTServer status: up
FortiOS 6.4.2 Administration Guide 1532
Fortinet Inc.
User & Authentication
FortiGate VM unique certificate
To safeguard against certificate compromise, FortiGate VM and FortiAnalyzer VM use the same deployment model as
FortiManager VM where the license file contains a unique certificate tied to the serial number of the virtual device.
A hardware appliance usually comes with a BIOS certificate with a unique serial number that identifies the hardware
appliance. This built-in BIOS certificate is different from a firmware certificate. A firmware certificate is distributed in all
appliances with the same firmware version.
Using a BIOS certificate with a built-in serial number provides a high trust level for the other side in X.509 authentication.
Since a VM appliance has no BIOS certificate, a signed VM license can provide an equivalent of a BIOS certificate. The
VM license assigns a serial number in the BIOS equivalent certificate. This gives the certificate an abstract access
ability, which is similar to a BIOS certificate with the same high trust level.
This feature is only supported in new, registered VM licenses.
Sample configurations
Depending on the firmware version and VM license, the common name (CN) on the certificate will be configured
differently.
To view validated certificates:
1. Go to System > Certificates.
2. Double-click on a VM certificate. There are two VM certificates:
l Fortinet_Factory
l Fortinet_Factory_Backup
The Certificate Detail Information window displays.
l If you are using new firmware (6.2.0 and later) with a new VM license, the CN becomes the FortiGate VM serial
number.
FortiOS 6.4.2 Administration Guide 1533
Fortinet Inc.
User & Authentication
l If you are using new firmware (6.2.0) with an old VM license, the CN remains as FortiGate. It does not change
to the VM serial number.
l If you are using old firmware (6.0.2) with a new VM license, the CN remains as FortiGate.
Running a file system check automatically
There is an option in FortiOS to enable automatic file system checks if the FortiGate shuts down ungracefully.
By default, the automatic file system check is disabled. When an administrator logs in after an ungraceful shutdown, a
warning message appears advising them to manually run a file system check.
GUI warning:
FortiOS 6.4.2 Administration Guide 1534
Fortinet Inc.
User & Authentication
CLI warning:
WARNING: File System Check Recommended! Unsafe reboot may have caused inconsistency in disk
drive.
It is strongly recommended that you check file system consistency before proceeding.
Please run 'execute disk scan 17'
Note: The device will reboot and scan during startup. This may take up to an hour
Enabling automatic file system checks
You can enable automatic file system checks in both the GUI and CLI.
To enable automatic file system checks in the GUI:
1. Go to System > Settings.
2. In the Start Up Settings section, enable Auto file system check.
3. Click Apply.
To enable automatic file system checks using the CLI:
config system global
set autorun-log-fsck enable
end
FortiGuard distribution of updated Apple certificates
Push notifications for iPhone (for the purpose of two-factor authentication) require a TLS server certificate to
authenticate to Apple. As this certificate is only valid for one year, a service extension allows FortiGuard to distribute
updated TLS server certificates to FortiGate when needed.
FortiOS 6.4.2 Administration Guide 1535
Fortinet Inc.
User & Authentication
FortiGuard update service updates local Apple push notification TLS server certificates when the local certificate is
expired. FortiGuard update service also reinstalls certificates when the certificates are lost.
You can verify that the feature is working on the FortiGate by using the CLI shell.
To verify certificate updates:
1. Using FortiOS CLI shell, verify that all certificates are installed:
/data/etc/apns # ls -al
drwxr-xr-x 2 0 0 Tue Jan 15 08:42:39 2019 1024 .
drwxr-xr-x 12 0 0 Tue Jan 15 08:45:00 2019 2048 ..
-rw-r--r-- 1 0 0 Sat Jan 12 00:06:30 2019 2377 apn-dev-cert.pem
-rw-r--r-- 1 0 0 Sat Jan 12 00:06:30 2019 1859 apn-dev-key.pem
-rw-r--r-- 1 0 0 Sat Jan 12 00:06:30 2019 8964 apn-dis-cert.pem
-rw-r--r-- 1 0 0 Sat Jan 12 00:06:30 2019 4482 apn-dis-key.pem
2. Rename all current Apple certificates.
Apple push notification no longer works after you rename the certificates.
/data/etc/apns # mv apn-dis-cert.pem apn-dis-cert.pem.save
/data/etc/apns # mv apn-dev-key.pem apn-dev-key.pem.save
/data/etc/apns # mv apn-dev-cert.pem apn-dev-cert.pem.save
/data/etc/apns # mv apn-dis-key.pem apn-dis-key.pem.save
/data/etc/apns # ls -al
drwxr-xr-x 2 0 0 Tue Jan 15 08:51:15 2019 1024 .
drwxr-xr-x 12 0 0 Tue Jan 15 08:45:00 2019 2048 ..
-rw-r--r-- 1 0 0 Sat Jan 12 00:06:30 2019 2377 apn-dev-cert.pem.save
-rw-r--r-- 1 0 0 Sat Jan 12 00:06:30 2019 1859 apn-dev-key.pem.save
-rw-r--r-- 1 0 0 Sat Jan 12 00:06:30 2019 8964 apn-dis-cert.pem.save
-rw-r--r-- 1 0 0 Sat Jan 12 00:06:30 2019 4482 apn-dis-key.pem.save
3. Run a FortiGuard update, and verify that all certificates are installed again:
/data/etc/apns # ls -al
drwxr-xr-x 2 0 0 Tue Jan 15 08:56:20 2019 1024 .
drwxr-xr-x 12 0 0 Tue Jan 15 08:56:15 2019 2048 ..
-rw-r--r-- 1 0 0 Sat Jan 12 00:06:30 2019 2377 apn-dev-cert.pem.save
-rw-r--r-- 1 0 0 Sat Jan 12 00:06:30 2019 1859 apn-dev-key.pem.save
-rw-r--r-- 1 0 0 Tue Jan 15 08:56:20 2019 2167 apn-dis-cert.pem <-- downloaded
from FortiGuard
-rw-r--r-- 1 0 0 Sat Jan 12 00:06:30 2019 8964 apn-dis-cert.pem.save
-rw-r--r-- 1 0 0 Tue Jan 15 08:56:20 2019 1704 apn-dis-key.pem <-- downloaded
from FortiGuard
-rw-r--r-- 1 0 0 Sat Jan 12 00:06:30 2019 4482 apn-dis-key.pem.save
-rw-r--r-- 1 0 0 Tue Jan 15 08:56:20 2019 41 apn-version.dat <-- downloaded
from FortiGuard
/data/etc/apns #
User Definition
The following topics provide information about user definition:
l User types on page 1537
l Removing a user on page 1537
FortiOS 6.4.2 Administration Guide 1536
Fortinet Inc.
User & Authentication
User types
You can configure FortiOS users in FortiOS or on an external authentication server. The following summarizes user
account types and authentication in FortiOS:
User type Authentication
Local Username and password must match a user account stored in FortiOS.
Authentication by FortiOS security policy.
Remote Username and password must match a user account stored in FortiOS and on the
remote authentication server. FortiOS supports LDAP, RADIUS, and TACACS+
servers.
Authentication server A FortiOS user group can include user accounts or groups that exist on a remote
authentication server.
FSSO Microsoft Windows or Novell network users can use their network credentials to
access resources through FortiOS. You can control access using FSSO user
groups that contain Windows or Novell user groups as members.
PKI/peer Digital certificate holder who authenticates using a client certificate. No password
is required unless two-factor authentication is enabled.
IM FortiOS does not authenticate IM users. FortiOS allows or blocks each IM user
from accessing IM protocols. A global policy for each IM protocol governs
unknown users' access to these protocols.
Guest Guest user accounts are temporary. The account expires after a selected period
of time. See Guest Management on page 1539.
Removing a user
When a user account is no longer in use, you should delete it. If any configuration objects, such as a user group,
reference the user account, you must remove the references before deleting the user.
To remove references to a user:
1. Go to User & Authentication > User Definition.
2. If the value in the Ref. column is not 0, click it.
3. FortiOS displays a list of object references to the user. Use this information to remove these references.
To remove a user using the GUI:
1. Go to User & Authentication > User Definition.
2. Select the desired user.
3. Click Delete, then OK.
To remove a user using the CLI:
config user local
delete exampleuser
FortiOS 6.4.2 Administration Guide 1537
Fortinet Inc.
User & Authentication
end
User Groups
A user group is a list of users. Security policies and some VPN configurations only allow access to specified user groups.
This restricted access enforces role-based access control (RBAC) to your organization's network and resources. Users
must be in a group and that group must be part of the security policy.
In most cases, FortiOS authenticates a user by requesting their username and password. FortiOS checks local user
accounts first. Then, if it does not find a match, FortiOS checks the RADIUS, LDAP, and TACACS+ servers that belong
to the user group. Authentication succeeds when FortiOS finds a matching username and password. If the user belongs
to multiple groups on a server, FortiOS matches those groups as well.
FortiOS does not allow username overlap between RADIUS, LDAP, and TACACS+ servers.
Configuring POP3 authentication
FortiOS can authenticate users who have accounts on POP3 or POP3s email servers.
To configure POP3 authentication:
config user pop3
edit pop3_server1
set server pop3.fortinet.com
set secure starttls
set port 110
next
end
To configure a POP3 user group:
A user group can list up to six POP3 servers as members.
config user group
edit pop3_grp
set member pop3_server1
next
end
FortiOS 6.4.2 Administration Guide 1538
Fortinet Inc.
User & Authentication
Guest Management
Configuring guest access
A visitor to your premises may need a user account on your network during their stay. If you are hosting a large event,
such as a conference, you may need to create many temporary accounts for the attendees. You can create many guest
accounts simultaneously using randomly generated user IDs and passwords to reduce your workload for these large
events.
The following describes managing guest access:
1. Create one or more guest user groups. All members of a group have the same user ID type, password type,
information fields used, and type and time of expiry.
2. Create guest accounts.
3. Use captive portal authentication and select the appropriate guest group.
4. The guest receives an email, SMS message, or printout containing their user ID and password from the FortiOS
administrator.
5. The guest logs onto the network using the provided credentials.
6. After the configured expiry time, the credentials are no longer valid.
This configuration consists of the following steps:
1. Add an SMS service.
2. Create a guest management administrator.
3. Create a guest user group.
4. Create guest user accounts.
To add an SMS service:
To send SMS notifications to guest users, add an email to SMS service to your FortiGate using the following commands:
config system sms-server
edit <server-name>
set mail-server <server-name>
next
end
To create a guest management administrator:
1. Go to System > Administrators.
2. Click Create New > Administrator.
3. Enable Restrict admin to guest account provisioning only.
4. For Guest Group, select the desired guest groups.
To create a guest user group:
The guest group configuration determines the provided fields when you create a guest user account.
1. Go to User & Authentication > User Groups.
2. Click Create New.
3. For Type, select Guest.
FortiOS 6.4.2 Administration Guide 1539
Fortinet Inc.
User & Authentication
4. If desired, enable Batch Guest Account Creation. When this is enabled, the following is true:
l User IDs and passwords are auto-generated.
l User accounts only have the User ID, Password, and Expiration fields. You can only edit the Expiration field. If
the expiry time is a duration, such as eight hours, the countdown starts at initial login.
l You can print the account information to provide to the guest. Guests do not receive email or SMS notifications.
5. For User ID, select one of the following:
Option Description
Email Guest's email address.
Auto Generated FortiOS creates a random user ID for the guest.
Specify The administrator assigns a user ID to the guest.
6. For Password, select one of the following:
Option Description
Disable No password.
Auto Generated FortiOS creates a random password for the guest.
Specify The administrator assigns a password to the guest.
7. For Start Countdown, select one of the following:
Option Description
On Account Creation FortiOS counts expiry time from time of account creation.
After First Login FortiOS counts expiry time from the guest's first login.
8. For Time, configure the expiry time. You can change this for individual users.
9. Configure any other field as required, then click OK.
Creating guest user accounts
To create a guest user account:
1. Go to User & Authentication > Guest Management.
2. Select the desired guest group.
3. Click Create New.
4. Configure the guest as desired.
5. Click OK.
To create multiple guest user accounts automatically:
1. Go to User & Authentication > Guest Management.
2. Select the desired guest group. This group must have Batch Guest Account Creation enabled.
3. Click Create New > Multiple Users.
4. Enter the Number of Accounts.
5. If desired, change the expiry.
6. Click OK.
FortiOS 6.4.2 Administration Guide 1540
Fortinet Inc.
User & Authentication
Retail environment guest access
Businesses such as coffee shops provide free Internet access for customers. In this scenario, you do not need to
configure guest management, as customers can access the WiFi access point without logon credentials.
However, consider that the business wants to contact customers with promotional offers to encourage future patronage.
You can configure an email collection portal to collect customer email addresses for this purpose. You can configure a
security policy to grant network access only to users who provide a valid email address. The first time a customer’s
device attempts WiFi connection, FortiOS requests an email address, which it validates. The customers' subsequent
connections go directly to the Internet without interruption.
This configuration consists of the following steps:
1. Creating an email collection portal on page 1541
2. Creating a security policy on page 1541
3. Checking for harvested emails on page 1542
Creating an email collection portal
The customer’s first contact with your network is a captive portal that presents a webpage requesting an email address.
When FortiOS has validated the email address, the customer’s device MAC address is added to the Collected Emails
device group.
This example modifies the freewifi WiFi interface to present an email collection captive portal.
To create an email collection portal:
config wireless-controller vap
edit freewifi
set security captive-portal
set portal-type email-collect
next
end
Creating a security policy
You must configure a security policy that allows traffic to flow from the WiFi SSID to the internet interface only for
members of the Collected Emails device group. This policy must be listed first. Unknown devices are not members of the
Collected Emails device group, so they do not match the policy.
To create a security policy:
config firewall policy
edit 3
set srcintf "freewifi"
set dstintf "wan1"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set nat enable
set email-collect enable
FortiOS 6.4.2 Administration Guide 1541
Fortinet Inc.
User & Authentication
next
end
Checking for harvested emails
To check for harvested emails in the GUI:
1. Go to Dashboard > Users & Devices.
2. Hover over the Device Inventory widget and click Expand to Full Screen.
To check for harvested emails in the CLI:
# diagnose user device list
hosts
vd 0 d8:d1:aa:aa:69:0f gen 35 req 30 redir 1 last 43634s 7-11_2-int
ip 10.0.2.101 ip6 fe80::dad2:cbff:feab:610f
type 2 'iPhone' src http c 1 gen 29
os 'iPhone' version 'iOS 6.0.1' src http id 358 c 1
email '[email protected]'
vd 0 74:e1:bb:bb:69:f9 gen 36 req 20 redir 0 last 39369s 7-11_2-int
ip 10.0.2.100 ip6 fe80::76e2:b6ff:fedd:69f9
type 1 'iPad' src http c 1 gen 5
os 'iPad' version 'iOS 6.0' src http id 293 c 1
host 'Joes’s-iPad' src dhcp
email '[email protected]'
LDAP Servers
Configuring an LDAP server
FortiOS can be configured to use an LDAP server for authentication.
To configure an LDAP server on the FortiGate:
1. Go to User & Authentication > LDAP Servers.
2. Click Create New.
3. Configure the following:
Name This connection name is for reference within the FortiGate only.
Server IP/Name LDAP server IP address or FQDN resolvable by the FortiGate.
Server Port By default, LDAP uses port 389 and LDAPS uses 636. Use this field to specify
a custom port if necessary.
Common Name Identifier Attribute field of the object in LDAP that the FortiGate uses to identify the
connecting user. The identifier is case sensitive. Common attributes are:
l cn (Common Name)
l sAMAccountName (SAMAccountName)
FortiOS 6.4.2 Administration Guide 1542
Fortinet Inc.
User & Authentication
l uid (User ID)
Distinguished Name Used to look up user account entries on the LDAP server. It reflects the
hierarchy of LDAP database object classes above the CN identifier in which
you are doing the lookup.
Enter dc=COMPANY,dc=com to specify the root of the domain to include all
objects.
Enter ou=VPN-Users,dc=COMPANY,dc=com to look up users under a
specific organization unit.
Exchange server Enable to specify the exchange server connector to collect information about
authenticated users from a corporate exchange server. See Exchange Server
connector on page 293 for more details.
Bind Type Select one of the following options:
l Simple: bind using simple password authentication using the client name.
The LDAP server only looks up against the distinguished name (DN), but
does not search on the subtree.
l Anonymous: bind using an anonymous user, and search starting from the
DN and recurse over the subtrees. Many LDAP servers do not allow this.
l Regular: bind using the username and password provided, and search
starting from the DN and recurse over the subtrees.
Username If using regular bind, enter a username with sufficient privileges to access the
LDAP server. The following formats are supported:
l username\administrator
l administrator@domain
l cn=administrator,cn=users,dc=domain,dc=com
Password If using regular bind, enter the password associated with the username.
Secure Connection Enable to apply security to the LDAP connection through STARTTLS or
LDAPS.
Protocol If Secure Connection is enabled, select STARTTLS or LDAPS. Selecting
STARTTLS changes the port to 389 and selecting LDAPS changes the port to
636.
Certificate The FortiGate will only accept a certificate from the LDAP server that is signed
by this CA.
When specifying a secure connection, there are some considerations for the certificate
used by LDAP to secure the connection. The FortiGate checks the certificate presented by
the LDAP server for the IP address or FQDN as specified in the Server IP/Name field with
the following logic:
l If there is a Subject Alternative Name (SAN), it will ignore any Common Name (CN)
value and look for a match in any of the SAN fields.
l If there is no SAN, it will check the CN for a match.
4. Optionally, click Test User Credentials to ensure that the account has sufficient access rights.
5. Click OK.
The FortiGate checks the connection and updates the Connection Status.
FortiOS 6.4.2 Administration Guide 1543
Fortinet Inc.
User & Authentication
FSSO polling connector agent installation
This topic gives an example of configuring a local FSSO agent on the FortiGate. The agent actively pools Windows
Security Event log entries on Windows Domain Controller (DC) for user log in information. The FSSO user groups can
then be used in a firewall policy.
This method does not require any additional software components, and all the configuration can be done on the
FortiGate.
To configure a local FSSO agent on the FortiGate:
1. Configure an LDAP server on the FortiGate on page 1544
2. Configure a local FSSO polling connector on page 1544
3. Add the FSSO groups to a policy on page 1546
Configure an LDAP server on the FortiGate
Refer to Configuring an LDAP server on page 1542. The connection must be successful before configuring the FSSO
polling connector.
Configure a local FSSO polling connector
To configure a local FSSO polling connector:
1. Go to Security Fabric > External Connectors.
2. Click Create New.
3. In the Endpoint/Identity section, select Poll Active Directory Server.
4. Fill in the required information.
FortiOS 6.4.2 Administration Guide 1544
Fortinet Inc.
User & Authentication
5. Select the just created LDAP server from the LDAP Server dropdown list.
The structure of the LDAP tree will be shown in the Users/Groups section.
6. Go to the Groups tab.
7. Select the required groups, right click on them, and select Add Selected. Multiple groups can be selected at one
time by holding the CTRL or SHIFT keys. The groups list can be filtered or searched to limit the number of groups
that are displayed.
8. Go to the Selected tab and verify that all the required groups are listed. Unneeded groups can be removed by right
clicking and selecting Remove Selected.
9. Click OK.
10. Go back to Security Fabric > External Connectors.
11. There should be two new connectors:
l The Local FSSO Agent is the backend process that is automatically created when the first FSSO polling
connector is created.
l The Active Directory Connector is the front end connector that can be configured by FortiGate administrators.
FortiOS 6.4.2 Administration Guide 1545
Fortinet Inc.
User & Authentication
To verify the configuration, hover the cursor over the top right corner of the connector; a popup window will show the
currently selected groups. A successful connection is also shown by a green up arrow in the lower right corner of the
connector.
If you need to get log in information from multiple DCs, then you must configure other Active Directory connectors
for each additional DC to be monitored.
Add the FSSO groups to a policy
FSSO groups can be used in a policy by either adding them to the policy directly, or by adding them to a local user group
and then adding the group to a policy.
To add the FSSO groups to a local user group:
1. Go to User & Authentication > User Groups.
2. Click Create New.
3. Enter a name for the group in the Name field.
4. Set the Type to Fortinet Single Sign-On (FSSO).
5. Add the FSSO groups as members.
6. Click OK.
7. Add the local FSSO group to a policy.
To add the FSSO groups directly to a firewall policy:
1. Go to Policy & Objects > Firewall Policy.
2. Click Create New.
3. Click in the Source field.
4. In the Select Entries pane, select the User tab.
FortiOS 6.4.2 Administration Guide 1546
Fortinet Inc.
User & Authentication
5. Select the FSSO groups.
6. Configure the remaining settings as required.
7. Click OK.
Troubleshooting
If an authenticated AD user cannot access the internet or pass the firewall policy, verify the local FSSO
user list:
# diagnose debug authd fsso list
----FSSO logons----
IP: 10.1.100.188 User: test2 Groups: CN=group2,OU=Testing,DC=Fortinet-FSSO,DC=COM
Workstation: MemberOf: CN=group2,OU=Testing,DC=Fortinet-FSSO,DC=COM
Total number of logons listed: 1, filtered: 0
----end of FSSO logons----
1. Check that the group in MemberOf is allowed by the policy.
2. If the expected AD user is not in list, but other users are, it means that either:
l The FortiGate missed the log in event, which can happen if many users log in at the same time, or
l The user's workstation is unable to connect to the DC, and is currently logged in with cached credentials, so
there is no entry in the DC security event log.
3. If there are no users in the local FSSO user list:
a. Ensure that the local FSSO agent is working correctly:
# diagnose debug enable
# diagnose debug authd fsso server-status
Server Name Connection Status Version Address
----------- ----------------- ------- -------
FGT_A (vdom1) # Local FSSO Agent connected FSAE server 1.1 127.0.0.1
The connection status must be connected.
b. Verify the Active Directory connection status:
# diagnose debug fsso-polling detail 1
AD Server Status (connected):
ID=1, name(10.1.100.131),ip=10.1.100.131,source(security),users(0)
FortiOS 6.4.2 Administration Guide 1547
Fortinet Inc.
User & Authentication
port=auto username=Administrator
read log eof=1, latest logon timestamp: Fri Jul 26 10:36:20 2019
polling frequency: every 10 second(s) success(274), fail(0)
LDAP query: success(0), fail(0)
LDAP max group query period(seconds): 0
LDAP status: connected
Group Filter: CN=group2,OU=Testing,DC=Fortinet-
FSSO,DC=com+CN=group21,OU=Testing,DC=Fortinet-FSSO,DC=COM
If the polling frequency shows successes and failures, that indicates sporadic network problems or a very busy
DC. If it indicates no successes or failures, then incorrect credentials could be the issue.
If the LDAP status is connected, then the FortiGate can access the configured LDAP server. This is required for
AD group membership lookup of authenticated users because the Windows Security Event log does not
include group membership information. The FortiGate sends an LDAP search for group membership of
authenticated users to the configure LDAP server.
FortiGate adds authenticated users to the local FSSO user list only if the group membership is one of the
groups in Group Filter.
4. If necessary, capture the output of the local FortiGate daemon that polls Windows Security Event logs:
# diagnose debug application fssod -1
This output contains a lot of detailed information which can be captured to a text file.
Limitations
l NTLM based authentication is not supported.
l If there are a large number of user log ins at the same time, the FSSO daemon may miss some. Consider using
FSSO agent mode if this will be an issue. See External connectors on page 218 for information.
l The FSSO daemon does not support all of the security log events that are supported by other FSSO scenarios. For
example, only Kerberos log in events 4768 and 4769 are supported.
Enabling Active Directory recursive search
By default, nested groups (groups that are members or other groups) are not searched in Windows Active Directory (AD)
LDAP servers because this can slow down the group membership search. There is an option in FortiOS to enable the
searching of nested groups for user group memberships on AD LDAP servers.
This option is not available for other LDAP servers, such as OpenLDAP-based servers.
The default behavior does not include nested groups:
config user ldap
edit "ldap-ad"
set server "10.1.100.131"
set cnid "cn"
set dn "dc=fortinet-fsso,dc=com"
set type regular
FortiOS 6.4.2 Administration Guide 1548
Fortinet Inc.
User & Authentication
set username "cn=Administrator,cn=users,dc=fortinet-fsso,dc=com"
set password XXXXXXXXXXXXXXXXXXXXXXXX
next
end
The default search results only show groups that have the user as member, and no groups that have groups as
members:
diagnose test authserver ldap ldap-ad nuser nuser
authenticate 'nuser' against 'ldap-ad' succeeded!
Group membership(s) - CN=nested3,OU=Testing,DC=Fortinet-FSSO,DC=COM
CN=Domain Users,CN=Users,DC=Fortinet-FSSO,DC=COM
To enable recursive search to include nested groups in the results:
config user ldap
edit "ldap-ad"
set server "10.1.100.131"
set cnid "cn"
set dn "dc=fortinet-fsso,dc=com"
set type regular
set username "cn=Administrator,cn=users,dc=fortinet-fsso,dc=com"
set password XXXXXXXXXXXXXXXXXXXXXXXX
set search-type recursive
next
end
The search results now include groups that have other groups as members:
diagnose test authserver ldap ldap-ad nuser nuser
authenticate 'nuser' against 'ldap-ad' succeeded!
Group membership(s) - CN=nested3,OU=Testing,DC=Fortinet-FSSO,DC=COM
CN=Domain Users,CN=Users,DC=Fortinet-FSSO,DC=COM
CN=nested2,OU=Testing,DC=Fortinet-FSSO,DC=COM
CN=nested1,OU=Testing,DC=Fortinet-FSSO,DC=COM
The group nested3 is a member of the group nested2, which is a member of the group nested1.
Configuring LDAP dial-in using a member attribute
In this configuration, users defined in Microsoft AD can set up a VPN connection based on an attribute that is set to
TRUE, instead of their user group. You can activate the Allow Dialin property in AD user properties, which sets the
msNPAllowDialin attribute to TRUE. You can use this procedure for other member attributes as your system requires.
This configuration consists of the following steps:
1. Ensure that the AD server has the msNPAllowDialin attribute set to TRUE for the desired users.
2. Configure user LDAP member attribute settings.
3. Configure LDAP group settings.
4. Ensure that you configured the settings correctly.
To configure user LDAP member attribute settings:
config user ldap
edit "ldap_server"
set server "192.168.201.3"
FortiOS 6.4.2 Administration Guide 1549
Fortinet Inc.
User & Authentication
set cnid "sAMAccountName"
set dn "DC=fortilabanz,DC=com,DC=au"
set type regular
set username "[email protected]"
set password ******
set member-attr "msNPAllowDialin"
next
end
To configure LDAP group settings:
config user group
edit "ldap_grp"
set member "ldap_server"
config match
edit 1
set server-name "ldap_server"
set group-name "TRUE"
next
end
next
end
To ensure that you configured the settings correctly:
Users that are members of the ldap_grp user group should be able to authenticate. The following shows sample
diagnose debug output when the Allow Dial-in attribute is set to TRUE:
get_member_of_groups-Get the memberOf groups.
get_member_of_groups- attr='msNPAllowDialin', found 1 values
get_member_of_groups-val[0]='TRUE'
fnbamd_ldap_get_result-Auth accepted
fnbamd_ldap_get_result-Going to DONE state res=0
fnbamd_auth_poll_ldap-Result for ldap svr 192.168.201.3 is SUCCESS
fnbamd_auth_poll_ldap-Passed group matching
If the attribute is not set to TRUE but is expected, you may see the following output:
get_member_of_groups-Get the memberOf groups.
get_member_of_groups- attr='msNPAllowDialin', found 1 values
get_member_of_groups-val[0]='FALSE'
fnbamd_ldap_get_result-Auth accepted
fnbamd_ldap_get_result-Going to DONE state res=0
fnbamd_auth_poll_ldap-Result for ldap svr 192.168.201.3 is SUCCESS
fnbamd_auth_poll_ldap-Failed group matching
The difference between the two outputs is the last line, which shows passed or failed depending on whether the member
attribute is set to the expected value.
Configuring wildcard admin accounts
To avoid setting up individual admin accounts in FortiOS, you can configure an admin account with the wildcard option
enabled, allowing multiple remote admin accounts to match one local admin account. This way, multiple LDAP admin
accounts can use one FortiOS admin account.
Benefits include:
FortiOS 6.4.2 Administration Guide 1550
Fortinet Inc.
User & Authentication
l Fast configuration of the FortiOS admin account to work with your LDAP network, saving effort and avoiding
potential errors incurred when setting up multiple admin accounts
l Reduced ongoing maintenance. As long as LDAP users belong to the same group and you do not modify the
wildcard admin account in FortiOS, you do not need to configure changes on the LDAP accounts. If you add or
remove a user from the LDAP group, you do not need to perform changes in FortiOS.
Potential issues include:
l Multiple users may be logged in to the same account simultaneously. This may cause issues if both users make
changes simultaneously.
l Security is reduced since multiple users have login access to the same account, as opposed to an account for each
user.
Wildcard admin configuration also applies to RADIUS. If configuring for RADIUS, configure the RADIUS server and
RADIUS user group instead of LDAP. When using the GUI, wildcard admin is the only remote admin account that does
not require you to enter a password on account creation. That password is normally used when the remote
authentication server is unavailable during authentication.
This example uses default values where possible. If a specific value is not mentioned, the example sets it to its default
value.
You can configure an admin account in Active Directory for LDAP authentication to allow an
admin to perform lookups and reset passwords without being a member of the Account
Operators or Domain Administrators built-in groups. See Configuring least privileges for LDAP
admin account authentication in Active Directory on page 1552.
To configure the LDAP server:
The important parts of this configuration are the username and group lines. The username is the domain administrator
account. The group binding allows only the GRP group access.
This example uses an example domain name. Configure as appropriate for your own network.
config user ldap
edit "ldap_server"
set server "192.168.201.3"
set cnid "sAMAccountName"
set dn "DC=example,DC=com,DC=au"
set type regular
set username "CN=Administrator,CN=Users,DC=example,DC=COM”
set password *
set group-member-check group-object
set group-object-filter (&
(objectcategory=group)member="CN=GRP,OU=training,DC=example,DC=COM"))
next
end
To configure the user group and add the LDAP server:
config user group
edit "ldap_grp"
set member "ldap_server"
config match
edit 1
set server-name "ldap_server"
set group-name "CN=GRP,OU=training,DC=example,DC=COM"
FortiOS 6.4.2 Administration Guide 1551
Fortinet Inc.
User & Authentication
next
end
next
end
end
end
end
To configure the wildcard admin account:
config system admin
edit "test"
set remote-auth enable
set accprofile "super_admin"
set wildcard enable
set remote-group "ldap_grp"
next
end
Configuring least privileges for LDAP admin account authentication in Active
Directory
An administrator should only have sufficient privileges for their role. In the case of LDAP admin bind, you can configure
an admin account in Active Directory for LDAP authentication to allow an admin to perform lookups and reset passwords
without being a member of the Account Operators or Domain Administrators built-in groups.
For information about Active Directory, see the product documentation.
To configure account privileges for LDAP authentication in Active Directory:
1. In the Active Directory Users and Computers administrative console, right-click the Organizational Unit (OU) or the
top-level domain you want to configure and select Delegate Control.
2. In the Delegation of Control Wizard dialog, click Next.
3. In the Users or Groups dialog, click Add... and search Active Directory for the users or groups.
4. Click OK and then click Next.
5. In the Tasks to Delegate dialog, select Create a custom task to delegate and click Next.
6. Select Only the following objects in the folder and scroll to the bottom of the list. Select User objects and click Next.
7. In the Permissions dialog, select General.
8. From the Permissions list, select the following:
l Change password
l Reset password
9. Clear the General checkbox and select Property-specific.
10. From the Permissions list, select the following:
l Write lockoutTime
l Read lockoutTime
l Write pwdLastSet
l Read pwdLastSet
l Write UserAccountControl
l Read UserAccountControl
FortiOS 6.4.2 Administration Guide 1552
Fortinet Inc.
User & Authentication
11. Click Next and click Finish.
RADIUS Servers
Topics about RADIUS servers include the following:
l Configuring RADIUS SSO authentication on page 1553
l RSA ACE (SecurID) servers on page 1559
l Support for Okta RADIUS attributes filter-Id and class on page 1564
l Send multiple RADIUS attribute values in a single RADIUS Access-Request on page 1566
Configuring RADIUS SSO authentication
A common RADIUS SSO (RSSO) topology involves a medium-sized company network of users connecting to the
Internet through the FortiGate and authenticating with a RADIUS server. The following describes how to configure
FortiOS for this scenario. The example makes the following assumptions:
l VDOMs are not enabled.
l The super_admin account is used for all FortiGate configuration.
l A RADIUS server is installed on a server or FortiAuthenticator and uses default attributes.
l BGP is used for any dynamic routing.
l You have configured authentication event logging under Log & Report.
Example.com has an office with 20 users on the internal network who need access to the Internet. The office network is
protected by a FortiGate-60C with access to the Internet through the wan1 interface, the user network on the internal
interface, and all servers are on the DMZ interface. This includes an Ubuntu sever running FreeRADIUS. This example
configures two users:
User Account
Pat Lee [email protected]
Kelly Green [email protected]
Configuring this example consists of the following steps:
FortiOS 6.4.2 Administration Guide 1553
Fortinet Inc.
User & Authentication
1. Configure RADIUS.
2. Configure FortiGate interfaces.
3. Configure a RSSO agent.
4. Create a RSSO user group.
5. Configure security policies.
6. Test the configuration.
To configure RADIUS:
Configuring RADIUS includes configuring a RADIUS server such as FreeRADIUS on user's computers and configuring
users in the system. In this example, Pat and Kelly belong to the exampledotcom_employees group. After completing
the configuration, you must start the RADIUS daemon. The users have a RADIUS client installed on their PCs that allow
them to authenticate through the RADIUS server.
For any problems installing FreeRADIUS, see the FreeRADIUS documentation.
To configure FortiGate interfaces:
You must define a DHCP server for the internal network, as this network type typically uses DHCP. The wan1 and dmz
interfaces are assigned static IP addresses and do not need a DHCP server. The following table shows the FortiGate
interfaces used in this example:
Interface Subnet Act as DHCP server Devices
wan1 172.20.120.141 No Internet service provider
dmz 10.11.101.100 No Servers including
RADIUS server
internal 10.11.102.100 Yes: x.x.x.110-250 Internal user network
1. Go to Network > Interfaces.
2. Edit wan1:
Alias Internet
Addressing Mode Manual
IP/Network Mask 172.20.120.141/255.255.255.0
Administrative Access HTTPS, SSH
Enable DHCP Server Not selected
Comments Internet
Administrative Status Up
3. Click OK.
4. Edit dmz:
Alias Servers
Addressing Mode Manual
FortiOS 6.4.2 Administration Guide 1554
Fortinet Inc.
User & Authentication
IP/Network Mask 10.11.101.100/255.255.255.0
Administrative Access HTTPS, SSH, PING, SNMP
Enable DHCP Server Not selected
Listen for RADIUS Select
Accounting Messages
Comments Servers
Administrative Status Up
5. Click OK.
6. Edit internal:
Alias Internal network
Addressing Mode Manual
IP/Network Mask 10.11.102.100/255.255.255.0
Administrative Access HTTPS, SSH, PING
Enable DHCP Server Select
Address Range 10.11.102.110 - 10.11.102.250
Netmask 255.255.255.0
Default Gateway Same as Interface IP
Comments Internal network
Administrative Status Up
To create a RADIUS SSO agent:
1. Go to Security Fabric > External Connectors.
2. Click Create New.
3. Under Endpoint/Identity, select RADIUS Single Sign-On Agent.
4. Enable Use RADIUS Shared Secret. Enter the RADIUS server's shared secret.
5. Enable Send RADIUS Responses. Click OK.
To create a RADIUS SSO user group:
1. Go to User & Authentication > User Groups.
2. Click Create New.
3. For Type, select RADIUS Single Sign-On (RSSO).
4. In RADIUS Attribute Value, enter the name of the RADIUS user group that this local user group represents.
5. Click OK.
Configuring security policies
The following security policies are required for RADIUS SSO:
FortiOS 6.4.2 Administration Guide 1555
Fortinet Inc.
User & Authentication
Sequence From To Type Schedule Description
Number
1 internal wan1 RADIUS SSO Business hours Authenticate outgoing user
traffic
2 internal wan1 Regular Always Allow essential network
services and VoIP
3 dmz wan1 Regular Always Allow servers to access the
Internet
4 internal dmz Regular Always Allow users to access
servers
5 any any Deny Always Implicit policy denying all
traffic that has not been
matched
You must place the RADIUS SSO policy at the top of the policy list so that it is matched first. The only exception to this is
if you have a policy to deny access to a list of banned users. In this case, you must put that policy at the top so that the
RADIUS SSO does not mistakenly match a banned user or IP address.
You must configure lists before creating security policies.
Schedule
You must configure a business_hours schedule. You can configure a standard Monday to Friday 8 AM to 5 PM
schedule, or whatever days and hours covers standard work hours at the company.
Address groups
You must configure the following address groups:
Name Interface Address range included
internal_network internal 10.11.102.110 to 10.11.102.250
company_servers dmz 10.11.101.110 to 10.11.101.250
Service groups
You must configure the service groups. The services listed are suggestions and you may include more or less as
required:
Name Interface Description of services to be
included
essential_network_services internal Any network protocols required for normal
network operation such as DNS, NTP,
BGP
FortiOS 6.4.2 Administration Guide 1556
Fortinet Inc.
User & Authentication
Name Interface Description of services to be
included
essential_server_services dmz All the protocols required by the company
servers such as BGP, HTTP, HTTPS, FTP,
IMAP, POP3, SMTP, IKE, SQL, MYSQL,
NTP, TRACEROUTE, SOCKs, and SNMP
user_services internal Any protocols required by users such as
HTTP, HTTPS, FTP
The following security policy configurations are basic and only include logging and default AV and IPS. These policies
allow or deny access to non-RADIUS SSO traffic. These are essential as network services including DNS, NTP, and
FortiGuard require access to the Internet.
To configure security policies:
1. Go to Policy & Objects > Firewall Policy.
2. Click Create New.
3. Configure the policy as follows, then click OK:
Incoming Interface Internal
Source Address internal_network
Outgoing Interface wan1
Destination Address all
Schedule always
Service essential_network_services
Action ACCEPT
NAT ON
Security Profiles ON: AntiVirus, IPS
Log Allowed Traffic ON
Comments Essential network services
4. Click Create New, and configure the new policy as follows, then click OK:
Incoming Interface dmz
Source Address company_servers
Outgoing Interface wan1
Destination Address all
Schedule always
Service essential_server_services
FortiOS 6.4.2 Administration Guide 1557
Fortinet Inc.
User & Authentication
Action ACCEPT
NAT ON
Security Profiles ON: AntiVirus, IPS
Log Allowed Traffic enable
Comments Company servers accessing the Internet
5. Click Create New, and configure the new policy as follows, then click OK:
Incoming Interface Internal
Source Address internal_network
Outgoing Interface dmz
Destination Address company_servers
Schedule always
Service all
Action ACCEPT
NAT ON
Security Profiles ON: AntiVirus, IPS
Log Allowed Traffic enable
Comments Access company servers
6. Click Create New, and configure the RADIUS SSO policy as follows, then click OK. This policy allows access for
members of specific RADIUS groups.
Incoming Interface Internal
Source Address internal_network
Source User(s) Select the user groups that you created for RSSO.
Outgoing Interface wan1
Destination Address all
Schedule business_hours
Service ALL
Action ACCEPT
NAT ON
Security Profiles ON: AntiVirus, Web Filter, IPS, and Email Filter. In each case, select the
default profile.
7. Place the RSSO policy higher in the security policy list than more general policies for the same interfaces. Click OK.
FortiOS 6.4.2 Administration Guide 1558
Fortinet Inc.
User & Authentication
To test the configuration:
Once configured, a user only needs to log in to their PC using their RADIUS account. After that, when they attempt to
access the Internet, the FortiGate uses their session information to get their RADIUS information. Once the user is
verified, they can access the website.
1. The user logs on to their PC and tries to access the Internet.
2. The FortiGate contacts the RADIUS server for the user's information. Once confirmed, the user can access the
Internet. Each step generates logs that enable you to verify that each step succeeded.
3. If a step does not succeed, confirm that your configuration is correct.
RSA ACE (SecurID) servers
SecurID is a two-factor system produced by the company RSA that uses one-time password (OTP) authentication. This
system consists of the following:
l Portable tokens that users carry
l RSA ACE/Server
l Agent host (the FortiGate)
When using SecurID, users carry a small device or "token" that generates and displays a pseudo-random password.
According to RSA, each SecurID authenticator token has a unique 64-bit symmetric key that is combined with a powerful
algorithm to generate a new code every 60 seconds. The token is time-synchronized with the SecurID RSA ACE/Server.
The RSA ACE/Server is the SecurID system's management component. It stores and validates the information about the
SecurID tokens allowed on your network. Alternately, the server can be an RSA SecurID 130 appliance.
The agent host is the server on your network. In this case, this is the FortiGate, which intercepts user logon attempts.
The agent host gathers the user ID and password entered from the SecurID token and sends the information to the RSA
ACE/Server for validation. If valid, the RSA ACE/Server returns a reply indicating that it is a valid logon and FortiOS
allows the user access to the network resources specified in the associated security policy.
Configuring SecurID with FortiOS consists of the following:
FortiOS 6.4.2 Administration Guide 1559
Fortinet Inc.
User & Authentication
1. Configure the RSA and RADIUS servers to work with each other. See RSA server documentation.
2. Do one of the following:
a. Configure the RSA SecurID 130 appliance.
b. Configure the FortiGate as an agent host on the RSA ACE/Server.
3. Configure the RADIUS server in FortiOS.
4. Create a SecurID user group.
5. Create a SecurID user.
6. Configure authentication with SecurID.
The following instructions are based on RSA ACE/Server 5.1 and RSA SecurID 130 appliance. They assume that you
have successfully completed all external RSA and RADIUS server configuration.
In this example, the RSA server is on the internal network and has an IP address of 192.128.100.000. The FortiOS
internal interface address is 192.168.100.3. The RADIUS shared secret is fortinet123, and the RADIUS server is at IP
address 192.168.100.202.
To configure the RSA SecurID 130 appliance:
1. Log on to the SecurID IMS console.
2. Go to RADIUS > RADIUS clients, then select Add New.
Setting Description
RADIUS Client Basics
Client Name FortiGate
Associated RSA Agent FortiGate
RADIUS Client Settings
IP Address Enter the FortiOS internal interface. In this example, it is 192.168.100.3.
Make / Model Select Standard Radius.
Shared Secret Enter the RADIUS shared secret. In this example, it is fortinet123.
Accounting Leave unselected.
Client Status Leave unselected.
3. Configure your FortiGate as a SecurID client:
4. Click Save.
To configure the FortiGate as an agent host on the RSA ACE/Server:
1. On the RSA ACE/Server, go to Start > Programs > RSA ACE/Server, then Database Administration - Host Mode.
2. From the Agent Host menu, select Add Agent Host.
3. Configure the following:
Setting Description
Name FortiGate
FortiOS 6.4.2 Administration Guide 1560
Fortinet Inc.
User & Authentication
Setting Description
Network Address Enter the FortiOS internal interface. In this example, it is 192.168.100.3.
Secondary Nodes You can optionally enter other IP addresses that resolve to the FortiGate.
For more information, see the RSA ACE/Server documentation.
To configure the RADIUS server in FortiOS:
1. Go to User & Authentication > RADIUS Servers, then click Create New.
2. Configure the following:
Setting Description
Name RSA
Authentication method Select Default.
Primary Server
IP/Name 192.168.100.102. You can click Test to ensure the IP address is correct and
that FortiOS can contact the RADIUS server.
Secret fortinet123
3. Click OK.
To create a SecurID user group:
1. Go to User & Authentication > User Groups. Click Create New.
2. Configure the following:
Setting Description
Name RSA_group
Type Firewall
3. In Remote Groups, click Add, then select the RSA server.
4. Click OK.
To create a SecurID user:
1. Go to User & Authentication > User Definition. Click Create New.
2. Configure the following:
Setting Description
User Type Remote RADIUS User
Type wloman
RADIUS Server RSA
FortiOS 6.4.2 Administration Guide 1561
Fortinet Inc.
User & Authentication
Setting Description
Contact Info (Optional) Enter email or SMS information.
User Group RSA_group
3. Click Create.
You can test the configuration by entering the diagnose test authserver radius RSA auto wloman
111111111 command. The series of 1s is the OTP that your RSA SecurID token generates that you enter for access.
Configuring authentication with SecurID
You can use the SecurID user group in several FortiOS features that authenticate by user group:
l Security policy on page 1562
l IPsec VPN XAuth on page 1563
l PPTP VPN on page 1563
l SSL VPN
Unless stated otherwise, the following examples use default values.
Security policy
The example creates a security policy that allows HTTP, FTP, and POP3 traffic from the internal interface to WAN1. If
these interfaces are not available in FortiOS, substitute other similar interfaces.
To configure a security policy with SecurID authentication:
1. Go to Policy & Objects > Firewall Policy.
2. Click Create New.
FortiOS 6.4.2 Administration Guide 1562
Fortinet Inc.
User & Authentication
3. Configure the following:
Setting Description
Incoming Interface internal
Source Address all
Source User(s) RSA_group
Outgoing Interface wan1
Destination Address all
Schedule always
Service HTTP, FTP, POP3
Action ACCEPT
NAT On
Shared Shaper If you want to limit traffic or guarantee minimum bandwidth for traffic that uses
the SecurID security policy, enable and use the default shaper, guarantee-
100kbps.
Log Allowed Traffic Enable if you want to generate usage reports on traffic that this policy has
authenticated.
4. Click OK.
IPsec VPN XAuth
In VPN > IPsec Wizard, select the SecurID user group on the Authentication page. The SecurID user group members
must enter their SecurID code to authenticate.
PPTP VPN
When configuring PPTP in the CLI, set usrgrp to the SecurID user group.
SSL VPN
You must map the SecurID user group to the portal that will serve SecurID users and include the SecurID user group in
the security policy's Source User(s) field.
To map the SecurID group to an SSL VPN portal:
1. Go to VPN > SSL-VPN Settings.
2. Under Authentication/Portal Mapping, click Create New.
FortiOS 6.4.2 Administration Guide 1563
Fortinet Inc.
User & Authentication
3. Configure the following:
Setting Description
Users/Groups RSA_group
Portal Select the desired portal.
4. Click OK.
Support for Okta RADIUS attributes filter-Id and class
RADIUS user group membership information can be returned in the filter-Id (11) and class (25) attributes in RADIUS
Access-Accept messages. The group membership information can be used for group matching in FortiGate user groups
in firewall policies and for FortiGate wildcard administrators with remote RADIUS authentication.
In this example, a FortiAuthenticator is used as the RADIUS server. A local RADIUS user on the FortiAuthenticator is
configure with two groups in the filter-Id attribute: okta-group1 and okta-group2.
To create the RADIUS user and set the attribute type to override group information:
config user radius
edit "FAC193"
set server "10.1.100.189"
set secret **********
set group-override-attr-type filter-Id
next
end
FortiOS will only use the configured filter-Id attribute, even if the RADIUS server sends group names in both class and
filter-id attributes. To return group membership information from the class attribute instead, set group-override-
attr-type to class.
To configure group match in the user group:
1. Go to User & Authentication > User Groups.
2. Click Create New.
3. Enter a name for the group, and set Type to Firewall.
4. In the Remote Groups table, click Add.
FortiOS 6.4.2 Administration Guide 1564
Fortinet Inc.
User & Authentication
5. Set Remote Server to the just created RADIUS server, FAC193.
6. Set Groups to Specify, and enter the group name, okta-group2. The string must match the group name
configured on the RADIUS server for the filter-Id attribute.
7. Click OK.
The remote server is added to the Remote Groups table.
8. Click OK.
9. Add the new user group to a firewall policy and generate traffic on the client PC that requires firewall authentication,
such as connecting to an external web server.
10. After authentication, on the FortiGate, verify that traffic is authorized in the traffic log:
a. Go to Log & Report > Forward Traffic.
b. Verify that the traffic was authorized.
To use the remote user group with group match in a system wildcard administrator configuration:
1. Go to System > Administrators.
2. Edit an existing administrator, or create a new one.
3. Set Type to Match all users in a remote server group.
4. Set Remote User Group to the remote server.
5. Configure the remaining settings as required.
6. Click OK.
7. Log in to the FortiGate using the remote user credentials on the RADIUS server.
If the correct group name is returned in the filter-Id attribute, administrative access is allowed.
FortiOS 6.4.2 Administration Guide 1565
Fortinet Inc.
User & Authentication
Send multiple RADIUS attribute values in a single RADIUS Access-Request
A managed FortiSwitch can be configured to send multiple RADIUS attribute values in a single RADIUS Access-
Request. This option is configured per RADIUS user, and is set to none by default.
The available service type options are:
login User should be connected to a host.
framed User use Framed Protocol.
callback-login User disconnected and called back.
callback-framed User disconnected and called back, then a Framed Protocol.
outbound User granted access to outgoing devices.
administrative User granted access to the administrative unsigned interface.
nas-prompt User provided a command prompt on the NAS.
authenticate-only Authentication requested, and no authentication information needs to be
returned.
callback-nas-prompt User disconnected and called back, then provided a command prompt.
call-check Used by the NAS in an Access-Request packet, Access-Accept to answer the
call.
callback-administrative User disconnected and called back, granted access to the admin unsigned
interface.
To configure a managed FortiSwitch to the RADIUS attributes login, framed, and authenticate-only all at
the same time:
config user radius
edit "Radius_Server"
set switch-controller-service-type login framed authenticate-only
....
next
end
TACACS+ servers
TACACS+ is a remote authentication protocol that provides access control for routers, network access servers, and
other network devices through one or more centralized servers.
FortiOS sends the following proprietary TACACS+ attributes to the TACACS+ server during authorization requests:
Attribute Description
service=<name> User must be authorized to access the specified service.
FortiOS 6.4.2 Administration Guide 1566
Fortinet Inc.
User & Authentication
Attribute Description
memberof Group that the user belongs to.
admin_prof Administrator profile (admin access only).
Only memberof and admin_prof attributes are parsed in authentication replies.
You can configure up to ten remote TACACS+ servers in FortiOS. You must configure at least one server before you can
configure remote users.
A TACACS+ server must first be added in the CLI to make the option visible in the GUI.
To configure TACACS+ authentication in the CLI:
1. Configure the TACACS+ server entry:
config user tacacs+
edit "TACACS-SERVER"
set server <IP address>
set key <string>
set authen-type ascii
set source-ip <IP address>
next
end
2. Configure the remote user group:
config user group
edit "TACACS-GROUP"
set group-type firewall
set member "TACACS-SERVER"
next
end
3. Configure the remote user:
config system admin
edit TACACS-USER
set remote-auth enable
set accprofile "super_admin"
set vdom "root"
set wildcard enable
set remote-group "TACACS-GROUP"
next
end
FortiOS 6.4.2 Administration Guide 1567
Fortinet Inc.
User & Authentication
To configure a TACACS+ server in the GUI:
1. Go to User & Authentication > TACACS+ Servers.
2. Click Create New.
3. Configure the following settings:
Name Enter the TACACS+ server name.
Authentication Type Select the authentication type used for the TACACS+ server.
Selecting Auto tries PAP, MSCHAP, and CHAP, in that order.
Server IP/Name Enter the domain name or IP address for the primary server.
Server Secret Enter the key to access the primary server.
4. Click OK.
SAML
The following topics provide information about SAML:
l Outbound firewall authentication for a SAML user on page 1568
l SAML SP for VPN authentication on page 1570
Outbound firewall authentication for a SAML user
When you configure a FortiGate as a service provider (SP), you can create an authentication profile that uses SAML for
firewall authentication.
You must use the identity provider's (IdP) remote certificate on the SPs.
The following example uses a FortiGate as an SP and FortiAuthenticator as the IdP server:
FortiOS 6.4.2 Administration Guide 1568
Fortinet Inc.
User & Authentication
To configure firewall authentication:
1. Configure the FortiGate SP to be a SAML user:
config user saml
edit "fac-firewall"
set entity-id "http://10.2.2.2:1000/saml/metadata/"
set single-sign-on-url "https://10.2.2.2:1003/saml/login/"
set single-logout-url "https://10.2.2.2:1003/saml/logout/"
set idp-entity-id "http://172.18.58.93:443/saml-idp/bbbbbb/metadata/"
set idp-single-sign-on-url "https://172.18.58.93:443/saml-idp/bbbbbb/login/"
set idp-single-logout-url "https://172.18.58.93:443/saml-idp/bbbbbb/logout/"
set idp-cert "REMOTE_Cert_3"
set user-name "username"
set group-name "group"
next
end
2. Add the SAML user to the user group (optionally, you can configure group matching):
config user group
edit "saml_firewall"
set member "fac-firewall"
config match
edit 1
set server-name "fac-firewall"
set group-name "user_group1"
next
end
next
end
3. Add the SAML user group to a firewall policy:
config firewall policy
edit 2
set srcintf "port3"
set dstintf "port1"
set srcaddr "all"
set dstaddr "pc4"
set action accept
set schedule "always"
set service "ALL"
set logtraffic all
set fsso disable
set groups "saml_firewall" "group_local"
set users "first"
set nat enable
next
end
4. Configure the FortiAuthenticator IdP as needed.
FortiOS 6.4.2 Administration Guide 1569
Fortinet Inc.
User & Authentication
5. Run HTTP/HTTPS authentication for a remote user. The SAML login page appears:
SAML SP for VPN authentication
When you configure a FortiGate as a service provider (SP), you can create an authentication profile that uses SAML for
SSL VPN web portal authentication.
You can use SAML with FortiClient for SSL VPN tunnel authentication. The following licensed versions are required for
this functionality:
l FortiClient (Windows) 6.4.0
l FortiClient (macOS) 6.4.1
l FortiClient (Linux) 6.4.1
The following example uses a FortiGate as an SP and FortiAuthenticator as the IdP server:
To configure SSL VPN web portal authentication:
1. Configure the FortiGate SP to be a SAML user:
config user saml
edit "fac-sslvpn"
set entity-id "https://10.2.2.2:10443/remote/saml/metadata/"
set single-sign-on-url "https://10.2.2.2:10443/remote/saml/login/"
set single-logout-url "https://10.2.2.2:10443/remote/saml/logout/"
set idp-entity-id "http://172.18.58.93:443/saml-idp/ssssss/metadata/"
set idp-single-sign-on-url "https://172.18.58.93:443/saml-idp/ssssss/login/"
set idp-single-logout-url "https://172.18.58.93:443/saml-idp/ssssss/logout/"
set idp-cert "REMOTE_Cert_3"
set user-name "username"
next
end
FortiOS 6.4.2 Administration Guide 1570
Fortinet Inc.
User & Authentication
2. Add the SAML user to the user group (group matching may also be configured):
config user group
edit "saml_sslvpn"
set member "fac-sslvpn"
next
end
3. Configure SSL VPN:
config vpn ssl settings
set servercert "Fortinet_Factory"
set tunnel-ip-pools "SSLVPN_TUNNEL_ADDR1"
set tunnel-ipv6-pools "SSLVPN_TUNNEL_IPv6_ADDR1"
set source-interface "port3"
set source-address "all"
set source-address6 "all"
set default-portal "full-access"
config authentication-rule
edit 1
set groups "saml_sslvpn"
set portal "full-access"
next
end
end
4. Add the SAML user group to a firewall policy:
config firewall policy
edit 8
set srcintf "ssl.vdom1"
set dstintf "port1"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set groups "local" "saml_sslvpn"
set nat enable
next
end
5. Configure the FortiAuthenticator IdP as needed.
To connect from the SSL VPN web portal:
1. In a web browser, enter the portal address. The SAML login page appears:
2. Enter the user name and password.
FortiOS 6.4.2 Administration Guide 1571
Fortinet Inc.
User & Authentication
3. Click Login, or if SSO has been configured, click Single-Sign-On.
Once authenticated, the web portal opens.
To connect from SSL VPN tunnel mode with FortiClient:
1. In FortiClient, click the Remote Access tab, and from the VPN Name dropdown, select the desired VPN tunnel.
2. Click SAML Login.
3. FortiClient displays an IdP authorization page in an embedded browser window. Enter the user name and
password.
4. Click Login.
Once authenticated, FortiClient establishes the SSL VPN tunnel.
Authentication Settings
You can configure general authentication settings, including timeout, protocol support, and certificates.
You cannot customize FTP and Telnet authentication replacement messages.
To configure authentication settings using the GUI:
1. Go to User & Authentication > Authentication Settings.
2. Configure the following settings:
Setting Description
Authentication Timeout Enter the desired timeout in minutes. You can enter a number between 1 and
1440 (24 hours). The authentication timeout controls how long an
authenticated connection can be idle before the user must reauthenticate. The
default value is 5.
Protocol Support Select the protocols to challenge during firewall user authentication.
When you enable user authentication within a security policy, the
authentication challenge is normally issued for any of four protocols,
depending on the connection protocol:
l HTTP (you can set this to redirect to HTTPS)
FortiOS 6.4.2 Administration Guide 1572
Fortinet Inc.
User & Authentication
Setting Description
l HTTPS
l FTP
l Telnet
The protocols selected here control which protocols support the authentication
challenge. Users must connect with a supported protocol first so they can
subsequently connect with other protocols. If HTTPS is selected as a protocol
support method, it allows the user to authenticate with a customized local
certificate.
When you enable user authentication within a security policy, FortiOS
challenges the security policy user to authenticate. For user ID and password
authentication, the user must provide their username and password. For
certificate authentication (HTTPS or HTTP redirected to HTTPS only), you can
install customized certificates on the unit and the user can also install
customized certificates on their browser. Otherwise, users see a warning
message and must accept a default Fortinet certificate. The network user's
web browser may deem the default certificate invalid.
Certificate If using HTTPS protocol support, select the local certificate to use for
authentication. This is available only if HTTPS and/or Redirect HTTP
Challenge to a Secure Channel (HTTPS) are selected.
To configure authentication settings using the CLI:
config user setting
set auth-timeout 5
set auth-type ftp http https telnet
set auth-cert Fortinet_Factory
end
FortiTokens
FortiTokens are security tokens used as part of a multi-factor authentication (MFA) system on FortiGate and
FortiAuthenticator. A security token is a 6-digit or 8-digit (configurable) one-time password (OTP) that is used to
authenticate one's identity electronically as a prerequisite for accessing network resources. FortiToken is available as
either a mobile or a physical (hard) token. Mobile tokens can be purchased as a license, or consumed with points as part
of the FortiToken Cloud service.
FortiToken Mobile and physical FortiTokens store their encryption seeds on the cloud. FortiToken Mobile seeds are
generated dynamically when the token is provisioned. They are always encrypted whether in motion or at rest.
You can only register FortiTokens to a single FortiGate or FortiAuthenticator for security purposes. This prevents
malicious third parties from making fraudulent requests to hijack your FortiTokens by registering them on another
FortiGate or FortiAuthenticator. If re-registering a FortiToken Mobile or Hard Token on another FortiGate is required, you
must contact Fortinet Customer Support.
Common usage for FortiTokens includes:
FortiOS 6.4.2 Administration Guide 1573
Fortinet Inc.
User & Authentication
l Applying MFA to a VPN dialup user connecting to the corporate network
l Applying MFA to FortiGate administrators
l Applying MFA to firewall authentication and captive portal authentication
The MFA process commonly involves:
l Something you know: User password
l Something you have: The FortiToken OTP
A third factor of authentication is added to the authentication process:
l Something you are: Your fingerprint or face
To enable the third factor, refer to the Activating FortiToken Mobile on a Mobile Phone on page
1579 section.
The following illustrates the FortiToken MFA process:
1. The user attempts to access a network resource.
2. FortiOS matches the traffic to an authentication security policy and prompts the user for their username and
password.
3. The user enters their username and password.
4. FortiOS verifies their credentials. If valid, it prompts the user for the FortiToken code.
5. The user views the current code on their FortiToken. They enter the code at the prompt.
6. FortiOS verifies the FortiToken code. If valid, it allows the user access to network resources.
If the FortiToken has drifted, the following must take place for the FortiToken to resynchronize with
FortiOS:
1. FortiOS prompts the user to enter a second code to confirm.
2. The user gets the next code from the FortiToken. They enter the code at the prompt.
3. FortiOS uses both codes to update its clock to match the FortiToken.
FortiOS 6.4.2 Administration Guide 1574
Fortinet Inc.
User & Authentication
This section includes the following topics to quickly get started with FortiTokens:
l FortiToken Mobile Quick Start Guide on page 1575
l FortiToken Cloud on page 1586
l Registering hard tokens on page 1587
l Managing FortiTokens on page 1589
l FortiToken Mobile Push on page 1591
l Troubleshooting and diagnosis on page 1593
FortiToken Mobile Quick Start Guide
FortiToken Mobile is an OATH compliant, event- and time-based one-time password (OTP) generator for mobile
devices. It provides an easy and flexible way to deploy and provision FortiTokens to your end users through mobile
devices. FortiToken Mobile produces its OTP codes in an application that you can download onto your Android or iOS
mobile device without the need for a physical token.
You can download the free FortiToken Mobile application for Android from the Google Play Store, and for iOS from the
Apple App Store.
FortiOS 6.4.2 Administration Guide 1575
Fortinet Inc.
User & Authentication
This section focuses on quickly getting started and setting up FortiToken Mobile for use on a FortiGate:
l Registering FortiToken Mobile on page 1576
l Provisioning FortiToken Mobile on page 1577
l Activating FortiToken Mobile on a Mobile Phone on page 1579
l Applying Multi-Factor Authentication on page 1586
Registering FortiToken Mobile
To deploy FortiToken Mobile for your end users, you must first register the tokens on your FortiGate. After registering the
tokens, you can assign them to your end users.
Each FortiGate comes with two free FortiToken Mobile tokens. These tokens should appear under User & Authentication
> FortiTokens. If no tokens appear, you may import them. Ensure that your FortiGate is registered and has internet
access to connect to the FortiToken servers to import the tokens.
To import FortiTokens from the FortiGate GUI:
1. Go to User & Authentication > FortiTokens.
2. Click the Import Free Trial Tokens icon at the top. The two free tokens are imported.
To import FortiTokens from the FortiGate CLI:
# exec fortitoken-mobile import 0000-0000-0000-0000-0000
# show user fortitoken
If only one free token appears, you can first delete that token and then follow the procedure to
import the two free tokens from either the GUI or the CLI.
If you have the FortiToken Mobile redemption certificate, you can register FortiToken Mobile on a FortiGate.
To register FortiToken Mobile from the FortiGate GUI:
1. Go to User & Authentication > FortiTokens and click Create New. The New FortiToken dialog appears.
2. For the Type field, select Mobile Token.
3. Locate the 20-digit code on the redemption certificate and type it in the Activation Code field.
4. Click OK. The token is successfully registered.
If you attempt to add invalid FortiToken serial numbers, there is no error message. FortiOS
does not add invalid serial numbers to the list.
To register FortiToken Mobile from the FortiGate CLI:
# exec fortitoken-mobile import <20-digit activation code>
# show user fortitoken
FortiOS 6.4.2 Administration Guide 1576
Fortinet Inc.
User & Authentication
FortiToken Mobile stores its encryption seeds on the cloud. You can only register it to a single
FortiGate or FortiAuthenticator.
Provisioning FortiToken Mobile
Once registered, FortiTokens need to be provisioned for users before they can be activated. In this example, you will
provision a Mobile token for a local user. Similar steps can be taken to assign FortiTokens to other types of users.
To create a local user and assign a FortiToken in the FortiGate GUI:
1. Go to User & Authentication > User Definition, and click Create New. The Users/Groups Creation Wizard appears.
2. In the User Type tab, select Local User, and click Next.
3. In the Login Credentials tab, enter a Username and Password for the user, and click Next.
FortiOS 6.4.2 Administration Guide 1577
Fortinet Inc.
User & Authentication
4. In the Contact Info tab:
a. Enable the Two-factor Authentication toggle.
b. Select FortiToken for Authentication Type.
c. Select a Token to assign to the user from the drop-down list.
d. Enter the user's email address in the Email Address field. This is the email where the user will receive the QR
code for activation of the FortiToken.
e. Click Next.
5. In the Extra Info tab, make sure the User Account Status field is set to Enabled. You can also optionally assign the
user to a user group by enabling the User Group toggle.
6. Click Submit. An activation code should be sent to the created user by email or SMS, depending upon the delivery
method configured above.
FortiGate has the Email Service setting configured using the server notifications.fortinet.net by
default. To see configuration, go to System > Settings > Email Service.
The activation code expires if not activated within the 3-day time period by default. However, the expiry time period is
configurable.
FortiOS 6.4.2 Administration Guide 1578
Fortinet Inc.
User & Authentication
To configure the time period (in hours) for FortiToken Mobile, using the CLI:
config system global
set two-factor-ftm-expiry <1-168>
end
To resend the email or SMS with the activation code, refer to the Managing FortiTokens on
page 1589 section.
Activating FortiToken Mobile on a Mobile Phone
After your system administrator provisions your token, you receive a notification with an activation code and expiry date
via SMS or email. If you do not activate your token by the expiry date, you must contact your system administrator so that
they can reassign your token for activation.
Platforms that support FortiToken Mobile:
Platform Device and firmware support
iOS iPhone, iPad, and iPod Touch with iOS 6.0 and later.
Android Phones and tablets with Android Jellybean 4.1 and later.
Windows Windows 10 (desktop and mobile), Windows Phone 8.1, and Windows Phone 8.
FortiToken is a Windows Universal Platform (UWP) application. To
download FortiToken for Windows 10 desktop and mobile platforms,
see FortiToken for Windows on the Microsoft Store.
The following instructions describe procedures when using FortiToken Mobile for iOS on an iPhone. Procedures may
vary depending on your device and firmware.
To activate FortiToken Mobile on iOS:
1. On your iOS device, tap on the FortiToken application icon to open the application. If this is your first time opening
the application, it may prompt you to create a PIN for secure access to the application and tokens.
FortiOS 6.4.2 Administration Guide 1579
Fortinet Inc.
User & Authentication
2. Tap on the + icon. The Scan Barcode screen appears.
3. If you received the QR code via email, locate and scan the QR code in your email.
OR
If you received the activation key via SMS, tap on Enter Manually at the bottom of the screen, and tap on Fortinet.
FortiOS 6.4.2 Administration Guide 1580
Fortinet Inc.
User & Authentication
Enter your email address in the Name field, the activation key in the Key field, and tap Done.
FortiOS 6.4.2 Administration Guide 1581
Fortinet Inc.
User & Authentication
4. FortiToken Mobile activates your token, and starts generating OTP digits immediately. To view or hide the OTP
digits, tap the eye icon.
After you open the application, FortiToken Mobile generates a new 6-digit OTP every 30 seconds. All configured tokens
display on the application homescreen.
The FortiToken Mobile activation process described above caters to the MFA process that involves two factors
(password and OTP) of the authentication process. A third factor (fingerprint or face) can be enabled as well.
To enable Touch/Face ID on iOS for FortiToken Mobile:
1. Open the FortiToken application and tap on Info.
FortiOS 6.4.2 Administration Guide 1582
Fortinet Inc.
User & Authentication
2. Tap on Touch/Face ID & PIN.
3. Enable and set up a 4-digit PIN for the application. The PIN is required to be enabled before you can enable
Touch/Face ID.
FortiOS 6.4.2 Administration Guide 1583
Fortinet Inc.
User & Authentication
FortiOS 6.4.2 Administration Guide 1584
Fortinet Inc.
User & Authentication
4. Enable Touch/Face ID.
You cannot enable Touch/Face ID for FortiToken if Touch/Face ID is not set up and
enabled for device unlock (iPhone Unlock in this case) on iOS. You must first set up and
enable Touch/Face ID from Settings on your iOS device.
FortiOS 6.4.2 Administration Guide 1585
Fortinet Inc.
User & Authentication
5. When prompted by iOS, allow the FortiToken application to use Touch/Face ID by tapping on OK in the prompt.
Applying Multi-Factor Authentication
Multi-factor authentication may also be set up for SSL VPN users, administrators, firewall policy, wireless users, and so
on. The following topics explain more about how you may use the newly created user in such scenarios:
l MFA for SSL VPN: Set up FortiToken multi-factor authentication on page 1418
l MFA for IPsec VPN: Add FortiToken multi-factor authentication on page 1255
l MFA for Administrators: Associating a FortiToken to an administrator account on page 710
l MFA with Captive Portal
l MFA for wireless users via Captive Portal
l Configuring firewall authentication on page 1597
FortiToken Cloud
FortiToken Cloud is an Identity and Access Management as a Service (IDaaS) cloud service offering by Fortinet. It
enables FortiGate and FortiAuthenticator customers to add MFA for their respective users, through the use of Mobile
tokens or Hard tokens. It protects local and remote administrators as well as firewall and VPN users.
For information, see Getting started—FGT-FTC users in the FortiToken Cloud Administration Guide.
FortiOS 6.4.2 Administration Guide 1586
Fortinet Inc.
User & Authentication
Registering hard tokens
Registering FortiTokens consists of the following steps:
1. Adding FortiTokens to FortiOS.
2. Activating FortiTokens.
3. Associating FortiTokens with user accounts.
Adding FortiTokens to FortiOS
You can add FortiTokens to FortiOS in the following ways:
l Add FortiToken serial numbers using the GUI
l Add FortiToken serial numbers using the CLI
l Import FortiTokens using a serial number or seed file using the GUI
To manually add single hard token to FortiOS using the GUI:
1. Go to User & Authentication > FortiTokens.
2. Click Create New.
3. For Type, select Hard Token.
4. In the Serial Number field, enter one or more FortiToken serial numbers.
5. Click OK.
To add multiple FortiTokens to FortiOS using the CLI:
config user fortitoken
edit <serial_number>
next
edit <serial_number2>
next
end
To import multiple FortiTokens to FortiOS using the GUI:
1. Go to User & Authentication > FortiTokens.
2. Click Create New.
FortiOS 6.4.2 Administration Guide 1587
Fortinet Inc.
User & Authentication
3. For Type, select Hard Token.
4. Click Import. The Import Tokens section slides in on the screen.
5. Select Serial Number File.
Seed files are only used with FortiToken-200CD. These are special hardware tokens that
come with FortiToken seeds on a CD. See the FortiToken Comprehensive Guide for
details.
6. Click Upload.
7. Browse to the file's location on your local machine, select the file, then click OK.
8. Click OK.
Activating FortiTokens
You must activate the FortiTokens before starting to use them. FortiOS requires connection to FortiGuard servers for
FortiToken activation. During activation, FortiOS queries FortiGuard servers about each token's validity. Each token can
only be used on a single FortiGate or FortiAuthenticator. If tokens are already registered, they are deemed invalid for re-
activation on another device. FortiOS encrypts the serial number and information before sending for added security.
To activate a FortiToken using the GUI:
1. Go to User & Authentication > FortiTokens.
2. Select the desired FortiTokens that have an Available status.
3. Click Activate from the menu above.
4. Click Refresh. The selected FortiTokens are activated.
To activate a FortiToken using the CLI:
config user fortitoken
edit <token_serial_num>
set status activate
next
end
FortiOS 6.4.2 Administration Guide 1588
Fortinet Inc.
User & Authentication
Associating FortiTokens with user accounts
You can associate FortiTokens with local user or administrator accounts.
To associate a FortiToken to a local user account using the GUI:
1. Ensure that you have successfully added your FortiToken serial number to FortiOS and that its status is Available.
2. Go to User & Authentication > User Definition. Edit the desired user account.
3. Enable Two-factor Authentication.
4. From the Token dropdown list, select the desired FortiToken serial number.
5. In the Email Address field, enter the user's email address.
6. Click OK.
To associate a FortiToken to a local user account using the CLI:
config user local
edit <username>
set type password
set passwd "myPassword"
set two-factor fortitoken
set fortitoken <serial_number>
set email-to "[email protected]"
set status enable
next
end
Before you can use a new FortiToken, you may need to synchronize it due to clock drift.
To associate a FortiToken to an administrator account, refer to the Associating a FortiToken to an administrator account
on page 710 section.
Managing FortiTokens
This section focuses on the following:
l Resending an activation email on page 1589
l Locking/unlocking FortiTokens on page 1590
l Managing FortiTokens drift on page 1590
l Deactivating FortiTokens on page 1591
l Moving FortiTokens to another device on page 1591
Resending an activation email
To resend an activation email/SMS for a mobile token on a FortiGate:
1. Go to User & Authentication > User Definition.
2. Double-click on the user to edit.
FortiOS 6.4.2 Administration Guide 1589
Fortinet Inc.
User & Authentication
3. Click Send Activation Code Email from the Two-factor Authentication section.
Locking/unlocking FortiTokens
To change FortiToken status to active or to lock using the CLI:
config user fortitoken
edit <token_serial_num>
set status <active | lock>
next
end
A user attempting to log in using a locked FortiToken cannot successfully authenticate.
Managing drift
Managing FortiTokens drift
If the FortiToken has drifted, the following must take place for the FortiToken to resynchronize with
FortiOS:
1. FortiOS prompts the user to enter a second code to confirm.
2. The user gets the next code from the FortiToken. They enter the code at the prompt.
3. FortiOS uses both codes to update its clock to match the FortiToken.
If you still experience clock drift, it may be the result of incorrect time settings on your mobile device. If so, make sure that
the mobile device clock is accurate by confirming the network time and the correct timezone.
If the device clock is set correctly, the issue could be the result of the FortiGate and FortiTokens being initialized prior to
setting an NTP server. This will result in a time difference that is too large to correct with the synchronize function. To
avoid this, selected Tokens can be manually drift adjusted.
To show current drift and status for each FortiToken from the CLI:
diagnose fortitoken info
FORTITOKEN DRIFT STATUS
FTK200XXXXXXXXXC 0 token already activated, and seed won't be returned
FTK200XXXXXXXXXE 0 token already activated, and seed won't be returned
FTKMOBXXXXXXXXXA 0 provisioned
FTKMOBXXXXXXXXX4 0 new
Total activated token: 0
Total global activated token: 0
Token server status: reachable
This command lists the serial number and drift for each configured FortiToken. You can check if it is necessary to
synchronize the FortiGate and any particular FortiTokens.
To adjust Mobile FortiToken for drift from the CLI:
exec fortitoken sync <FortiToken_ID> <token_code1> <next_token_code2>
FortiOS 6.4.2 Administration Guide 1590
Fortinet Inc.
User & Authentication
Deactivating FortiTokens
To deactivate FortiToken on a FortiGate:
1. Go to User & Authentication > User Definition.
2. Select and edit the user for which you want to deactivate the token.
3. Disable the Two-factor Authentication toggle.
4. Click OK. The token will be removed from the user's Two-factor Authentication column. The user will also be
removed from the token's User column under User & Authentication > FortiTokens.
Moving FortiTokens to another device
FortiTokens can only be activated on a single FortiGate or FortiAuthenticator. To move FortiTokens to another device,
you would first have to reset the registered FortiTokens on a device and then reactivate them on another device.
To reset Hard tokens registered to a FortiGate appliance (non-VM model), you can reset all hardware FTK200 tokens
from the Support Portal, or during RMA transfer. See the Migrating users and FortiTokens to another FortiGate KB
article, for more information.
The above process will reset all Hard tokens and you cannot select individual tokens to reset.
To reset FortiToken Mobile, a single Hard token, a Hard token registered to a VM, and so on, an administrator must
contact Customer Support and/or open a ticket on the Support Portal.
Once reset, the FortiTokens can be activated on another FortiGate or FortiAuthenticator.
FortiToken Mobile Push
FortiToken Mobile Push allows authentication requests to be sent as push notifications to the end user's FortiToken
Mobile application.
The FortiToken Mobile push service operates as follows:
1. FortiGate sends a DNS query to the FortiToken Mobile Push proxy server (push.fortinet.com).
2. FortiGate connects to the proxy server via an encrypted connection over TCP/443.
3. The proxy server handles the notification request by making a TLS connection with either Apple (for iOS) or Google
(for Android) notification servers. Notification data may include the recipient, session, FortiGate callback IP and
port, and so on.
4. The notification service from either Apple or Google notifies the user's mobile device of the push request.
5. The FortiToken Mobile application on the user's mobile displays a prompt for the user to either Approve or Deny the
FortiOS 6.4.2 Administration Guide 1591
Fortinet Inc.
User & Authentication
request.
FortiOS 6.4.2 Administration Guide 1592
Fortinet Inc.
User & Authentication
To configure FortiToken Mobile push services using the CLI:
config system ftm-push
set status enable
set server-ip <ip-address>
set server-port [1-65535]
end
The default server port is 4433.
The server IP address is the public IP address of the FortiOS interface that FortiToken Mobile calls back to. FortiOS uses
this IP address for incoming FortiToken Mobile calls.
If an SSL VPN user authenticates with their token, then logs out and attempts to reauthenticate within a minute, a Please
wait x seconds to login again message displays. This replaces a previous error/permission denied message. The x
value depends on the calculation of how much time is left in the current time step.
config system interface
edit "guest"
set allowaccess ftm
next
end
FortiOS supports FortiAuthenticator-initiated FortiToken Mobile Push notifications for users
attempting to authenticate through an SSL VPN and/or RADIUS server (with
FortiAuthenticator as the RADIUS server).
Troubleshooting and diagnosis
This section contains some common scenarios for FortiTokens troubleshooting and diagnosis:
l FortiToken Statuses on page 1593
l Recovering trial FortiTokens on page 1594
l Recovering lost Administrator FortiTokens on page 1595
l SSL VPN with multi-factor authentication expiry timers on page 1596
FortiToken Statuses
When troubleshooting FortiToken issues, it is important to understand different FortiToken statuses. FortiToken status
may be retrieved either from the CLI or the GUI, with a slightly different naming convention.
Before you begin, verify that the FortiGate has Internet connectivity and is also connected to both the FortiGuard and
registration servers:
# exec ping fds1.fortinet.com
# exec ping directregistration.fortinet.com
# exec ping globalftm.fortinet.net
The globalftm.fortinet.net server is the Fortinet Anycast server added in FortiOS
6.4.2.
FortiOS 6.4.2 Administration Guide 1593
Fortinet Inc.
User & Authentication
If there are connectivity issues, retrieving FortiToken statuses or performing FortiToken activation could fail. Therefore,
troubleshoot connectivity issues before continuing.
To retrieve FortiToken statuses:
l From the CLI:
# diagnose fortitoken info
l From the GUI:
Go to User & Authentication > FortiTokens.
Various FortiToken statuses in either the CLI or the GUI may be described as follows:
CLI GUI Description
new Available Newly added, not pending, not activated, not yet assigned.
active Assigned Assigned to a user, hardware token.
provisioning Pending Assigned to a user and waiting for activation on the FortiToken Mobile app.
provisioned Assigned Assigned to user and activated on the FortiToken Mobile app.
provision Token provided to user but not activated on the FortiToken Mobile app. To fix,
timeout the token needs to be re-provisioned and activated in time.
token already Error Token is locked by FortiGuard FDS. The hardware token was already activated
activated, and on another device and locked by FDS.
seed won't be
returned
locked Either manually locked by an Administrator (set status lock), or locked
automatically, for example, when the token is unassigned and the FortiCare
FTM provisioning server was unreachable to process that change.
Recovering trial FortiTokens
You can recover trial FortiTokens if deleted from a FortiGate, or if stuck in a state where it is not possible to provision to a
user.
When a token is stuck in an unusual state or with errors, delete the FortiTokens from the unit and proceed to recover trial
FortiTokens.
To recover trial tokens via the GUI:
1. Go to User & Authentication > FortiTokens.
2. Click the Import Free Trial Tokens button at the top. The two free trial tokens are recovered.
To recover trial tokens via the CLI:
# execute fortitoken-mobile import 0000-0000-0000-0000-0000
l Before attempting to recover the trial tokens, both the tokens should be deleted from the
unit first.
l If VDOMs are enabled, trial tokens are in the management VDOM (root by default).
FortiOS 6.4.2 Administration Guide 1594
Fortinet Inc.
User & Authentication
Following error codes might come up in the CLI:
l If the device is not registered:
# exec fortitoken-mobile import 0000-0000-0000-0000-0000
import fortitoken license error: -7571
l If the serial number format is incorrect:
# exec fortitoken-mobile import 0000-0000-0000-0000-00
import fortitoken license error: -7566
Recovering lost Administrator FortiTokens
If an Administrator loses their FortiToken or the FortiToken is not working, they will not be able to log into the admin
console through the GUI or the CLI. If there is another Administrator that can log into the device, they may be able to
reset the two-factor settings configured for the first Administrator, or create a new Admin user for them. Note that a
super_admin user will be able to edit other admin user settings, but a prof_admin user will not be able to edit super_
admin settings.
In the case where there are no other administrators configured, the only option is to flash format the device and reload a
backup config file. You must have console access to the device in order to format and flash the device. It is
recommended to be physically on site to perform this operation.
The process of resetting an Admin user password using the maintainer account cannot be
used to reset or disable two-factor authentication.
Before formatting the device, verify that you have a backup config file. You may or may not have the latest config file
backed up, though you should consider using a backed up config file, and reconfigure the rest of the recent changes
manually. Otherwise, you may need to configure your device starting from the default factory settings.
To recover lost Administrator FortiTokens:
1. If you have a backed up config file:
a. Open the config file and search for the specific admin user. For representational purposes we will use Test in
our example.
# edit "Test"
set accprofile "super_admin"
set vdom "root"
set two-factor fortitoken
set fortitoken "FTKXXXXXXXXXX"
set email-to "[email protected]"
set password ENC
SH2BsE7VSvHKynpoY1nOupdfaefe/n+JaPrCMPFADY2U5kLUPnZwuitOpNz35YI=
next
end
b. Once you find the settings for the Test user, delete the fortitoken-related settings:
# edit "Test"
set accprofile "super_admin"
set vdom "root"
set password ENC
SH2BsE7VSvHKynpoY1nOupdfaefe/n+JaPrCMPFADY2U5kLUPnZwuitOpNz35YI=
next
end
FortiOS 6.4.2 Administration Guide 1595
Fortinet Inc.
User & Authentication
2. Format the boot device during a maintenance window and reload the firmware image using instructions in the
Formatting and loading FortiGate firmware image using TFTP KB article.
3. Once the reload is complete, log into the admin console from the GUI using the default admin user credentials, and
go to Configuration > Restore from the top right corner to reload your config file created in Step 1 above.
4. Once the FortiGate reboots and your configuration is restored, you can log in with your admin user credentials.
SSL VPN with multi-factor authentication expiry timers
When SSL VPN is configured with multi-factor authentication (MFA), sometimes you may require a longer token expiry
time than the default 60 seconds.
To configure token expiry timers using the CLI:
# config system global
set two-factor-ftk-expiry <number of seconds>
set two-factor-ftm-expiry <number of seconds>
set two-factor-sms-expiry <number of seconds>
set two-factor-fac-expiry <number of seconds>
set two-factor-email-expiry <number of seconds>
end
These timers apply to the tokens themselves and remain valid for as long as configured above. However, SSL VPN does
not necessarily accept tokens for the entire duration they are valid. To ensure SSLVPN accepts the token for longer
durations, you need to configure the remote authentication timeout setting accordingly.
To configure the remote authentication timeout:
# config system global
set remoteauthtimeout <1-300 seconds>
end
SSL VPN waits for a maximum of five minutes for a valid token code to be provided before closing down the connection,
even if the token code is valid for longer.
The remoteauthtimout setting shows how long SSL VPN waits not only for a valid token to
be provided before closing down the connection, but also for other remote authentication like
LDAP, RADIUS, and so on.
Configuring the maximum log in attempts and lockout period
Failed log in attempts can indicate malicious attempts to gain access to your network. To prevent this security risk, you
can limit the number of failed log in attempts. After the configured maximum number of failed log in attempts is reached,
access to the account is blocked for the configured lockout period.
To configure number of maximum log in attempts:
This example sets the maximum number of log in attempts to five.
config user setting
set auth-lockout-threshold 5
FortiOS 6.4.2 Administration Guide 1596
Fortinet Inc.
User & Authentication
end
To configure the lockout period in seconds:
This example sets the lockout period to five minutes (300 seconds).
config user setting
set auth-lockout-duration 300
end
PKI
The following topics include information about public key infrastructure (PKI):
l Creating a PKI/peer user on page 1597
l SSL VPN with certificate authentication on page 1492
l SSL VPN with LDAP-integrated certificate authentication on page 1441
Creating a PKI/peer user
A PKI/peer user is a digital certificate holder. A FortiOS PKI user account contains the information required to determine
which CA certificate to use to validate the user's certificate. You can include a peer user in a firewall user group or peer
certificate group used in IPsec VPN.
To define a peer user, you need the following:
l Peer username
l Text from the user's certificate's subject field, or the name of the CA certificate used to validate the user's certificate
To create a peer user for PKI authentication:
config user peer
edit peer1
set subject [email protected]
set ca CA_Cert_1
next
end
You can add or modify other configuration settings for PKI authentication, including configuring using an LDAP server to
check client certificate access rights. See the FortiOS CLI Reference.
Configuring firewall authentication
In this example, a Windows network is connected to the FortiGate on port 2, and another LAN, Network_1, is connected
on port 3.
FortiOS 6.4.2 Administration Guide 1597
Fortinet Inc.
User & Authentication
All Windows network users authenticate when they log on to their network. Engineering and Sales groups members can
access the Internet without reentering their authentication credentials. The example assumes that you have already
installed and configured FSSO on the domain controller.
LAN users who belong to the Internet_users group can access the Internet after entering their username and password.
The example shows two users: User1, authenticated by a password stored in FortiOS; and User 2, authenticated on an
external authentication server. Both users are local users since you create the user accounts in FortiOS.
1. Create a locally authenticated user account.
2. Create a RADIUS-authenticated user account.
3. Create an FSSO user group.
4. Create a firewall user group.
5. Define policy addresses.
6. Create security policies.
Creating a locally authenticated user account
User1 is authenticated by a password stored in FortiOS.
To create a locally authenticated user account in the GUI:
1. Go to User & Authentication > User Definition and click Create New.
2. Configure the following settings:
User Type Local User
User Name User1
Password hardtoguess1@@1
User Account Status Enabled
3. Click Submit.
To create a locally authenticated user account in the CLI:
config user local
edit user1
set type password
set passwd hardtoguess1@@1
next
end
FortiOS 6.4.2 Administration Guide 1598
Fortinet Inc.
User & Authentication
Creating a RADIUS-authenticated user account
You must first configure FortiOS to access the external authentication server, then create the user account.
To create a RADIUS-authenticated user account in the GUI:
1. Go to User & Authentication > RADIUS Servers and click Create New.
2. Configure the following settings:
Name OurRADIUSsrv
Authentication method Default
Primary Server
IP/Name 10.11.101.15
Secret OurSecret
3. Click OK.
4. Go to User & Authentication > User Definition and click Create New.
5. Configure the following settings:
User Type Remote RADIUS User
User Name User2
RADIUS Server OurRADIUSsrv
User Account Status Enabled
6. Click Submit.
To create a RADIUS-authenticated user account in the CLI:
config user radius
edit OurRADIUSsrv
set server 10.11.102.15
set secret OurSecret
set auth-type auto
next
end
config user local
edit User2
set name User2
set type radius
set radius-server OurRADIUSsrv
next
end
Creating an FSSO user group
This example assumes that you have already set up FSSO on the Windows network and that it used advanced mode,
meaning that it uses LDAP to access user group information. You must do the following:
FortiOS 6.4.2 Administration Guide 1599
Fortinet Inc.
User & Authentication
l Configure LDAP access to the Windows AD global catalog
l Specify the collector agent that sends user log in information to FortiOS
l Select Windows user groups to monitor
l Select and add the Engineering and Sales groups to an FSSO user group
To create an FSSO user group in the GUI:
1. Configure LDAP for FSSO:
a. Go to User & Authentication > LDAP Servers and click Create New.
b. Configure the following settings:
Name ADserver
Server Name / IP 10.11.101.160
Distinguished Name dc=office,dc=example,dc=com
Bind Type Regular
Username cn=FSSO_Admin,cn=users,dc=office,dc=example,dc=com
Password Enter a secure password.
c. Leave other fields as-is. Click OK.
2. Specify the collector agent for FSSO;
a. Go to Security Fabric > External Connectors and click Create New.
b. Under Endpoint/Identity, select Fortinet Single Sign-On Agent.
c. Configure the following settings:
Name Enter the Windows AD server name. This name appears in the Windows
AD server list when you create user groups. In this example, the name is
WinGroups.
Server IP/Name Enter the IP address or name of the server where the agent is installed.
The maximum name length is 63 characters. In this example, the IP
address is 10.11.101.160.
Password Enter the password of the server where the agent is installed. You only
need to enter a password for the collector agent if you configured the agent
to require authenticated access.
If the TCP port used for FSSO is not the default, 8000, you can run the
config user fsso command to change the setting in the CLI.
Collector Agent AD access Advanced
mode
LDAP Server Select the previously configured LDAP server. In this example, it is
ADserver.
User/Groups/Organization Select the users, groups, and OUs to monitor.
Units
d. Click OK.
FortiOS 6.4.2 Administration Guide 1600
Fortinet Inc.
User & Authentication
3. Create the FSSO_Internet_users user group:
a. Go to User & Authentication > User Groups and click Create New.
b. Configure the following settings:
Name FSSO_Internet_users
Type Fortinet Single Sign-On (FSSO)
Members Engineering, Sales
c. Click OK.
To create an FSSO user group in the CLI:
config user ldap
edit "ADserver"
set server "10.11.101.160"
set dn "cn=users,dc=office,dc=example,dc=com"
set type regular
set username "cn=administrator,cn=users,dc=office,dc=example,dc=com"
set password set_a_secure_password
next
end
config user fsso
edit "WinGroups"
set ldap-server "ADserver"
set password ********
set server "10.11.101.160"
next
end
config user group
edit FSSO_Internet_users
set group-type fsso-service
set member CN=Engineering,cn=users,dc=office,dc=example,dc=com
CN=Sales,cn=users,dc=office,dc=example,dc=com
next
end
Creating a firewall user group
This example shows a firewall user group with only two users. You can add additional members.
To create a firewall user group in the GUI:
1. Go to User & Authentication > User Groups and click Create New.
2. Configure the following settings:
Name Internet_users
Type Firewall
Members User1, User2
3. Click OK.
FortiOS 6.4.2 Administration Guide 1601
Fortinet Inc.
User & Authentication
To create a firewall user group in the CLI:
config user group
edit Internet_users
set group-type firewall
set member User1 User2
next
end
Defining policy addresses
To define policy addresses:
1. Go to Policy & Objects > Addresses.
2. Click Create New > Address.
3. Configure the following settings:
Name Internal_net
Type Subnet
IP/Netmask 10.11.102.0/24
Interface Port 3
4. Click OK.
5. Create another new address by repeating steps 2-4 using the following settings:
Name Windows_net
Type Subnet
IP/Netmask 10.11.101.0/24
Interface Port 2
Creating security policies
You must create two security policies: one for the firewall group connecting through port 3, and one for the FSSO group
connecting through port 2.
To create security policies using the GUI:
1. Go to Policy & Objects > Firewall Policy.
2. Click Create New.
3. Configure the following settings:
Incoming Interface Port2
Source Address Windows_net
Source User(s) FSSO_Internet_users
FortiOS 6.4.2 Administration Guide 1602
Fortinet Inc.
User & Authentication
Outgoing Interface Port1
Destination Address all
Schedule always
Service ALL
NAT Enabled.
Security Profiles You can enable security profiles as desired.
4. Click OK.
5. Create another new policy by repeating steps 2-4 using the following settings:
Incoming Interface Port3
Source Address Internal_net
Source User(s) Internet_users
Outgoing Interface Port1
Destination Address all
Schedule always
Service ALL
NAT Enabled.
Security Profiles You can enable security profiles as desired.
6. Click OK.
To create security policies using the CLI:
config firewall policy
edit 0
set srcintf port2
set dstintf port1
set srcaddr Windows_net
set dstaddr all
set action accept
set groups FSSO_Internet_users
set schedule always
set service ANY
set nat enable
next
end
config firewall policy
edit 0
set srcintf port3
set dstintf port1
set srcaddr internal_net
set dstaddr all
set action accept
set schedule always
set groups Internet_users
set service ANY
FortiOS 6.4.2 Administration Guide 1603
Fortinet Inc.
User & Authentication
set nat enable
next
end
FortiOS 6.4.2 Administration Guide 1604
Fortinet Inc.
Wireless configuration
See the FortiWiFi and FortiAP Cookbook.
FortiOS 6.4.2 Administration Guide 1605
Fortinet Inc.
Switch Controller
Use the Switch Controller function, also known as FortiLink, to remotely manage FortiSwitch units. In the commonly-
used layer 2 scenario, the FortiGate that is acting as a switch controller is connected to distribution FortiSwitch units. The
distribution FortiSwitch units are in the top tier of stacks of FortiSwitch units and connected downwards with Convergent
or Access layer FortiSwitch units. To leverage CAPWAP and the Fortinet proprietary FortiLink protocol, set up data and
control planes between the FortiGate and FortiSwitch units.
FortiLink allows administrators to create and manage different VLANs, and apply the full-fledged security functions of
FortiOS to them, such as 802.1X authentication and firewall policies. Most of the security control capabilities on the
FortiGate are extended to the edge of the entire network, combining FortiGate, FortiSwitch, and FortiAP devices, and
providing secure, seamless, and unified access control to users.
The following topics provide information about switch controllers:
l FortiLink setup on page 1606
l Viewing managed FortiSwitches on page 1608
l Register FortiSwitch to FortiCloud on page 1610
l VLAN interface templates for FortiSwitches on page 1613
l FortiLink auto network configuration policy on page 1617
l FortiLink network sniffer extension on page 1618
l FortiLink MCLAG configuration on page 1620
l Allow FortiSwitch Trunk mode selection on FortiGate on page 1621
l Standalone FortiGate as switch controller on page 1622
l HA (A-P) mode FortiGate pairs as switch controller on page 1637
l Authentication and security on page 1655
l Flow and device detection on page 1667
l FortiSwitch multi-tenant support on page 1680
l Persistent MAC learning on page 1683
l Split port mode (for QSFP / QSFP28) on page 1684
l Dynamic VLAN name assignment from RADIUS attribute on page 1686
l MPSK groups on page 1686
l MSTI support on page 1690
l Netflow and IPFIX support on page 1690
l ECN configuration for managed FortiSwitch devices on page 1692
l PTP transparent clock mode configuration for managed FortiSwitch devices on page 1693
FortiLink setup
Go to WiFI & Switch Controller > FortiLink Interface to create or edit FortiLink interfaces. The available options depend
on the FortiGate model.
By automatically creating FortiLink interfaces as a logical aggregate or hard/soft switch, you can modify the FortiLink
interfaces. If the physical port in use changes, you do not need to migrate existing policies.
FortiOS 6.4.2 Administration Guide 1606
Fortinet Inc.
Switch Controller
By default, one FortiLink interface can be configured in the GUI. The GUI will display multiple FortiLink interfaces if more
than one interface has FortiLink enabled from the CLI.
To enable a physical or aggregate interface as a FortiLink in the CLI:
config system interface
edit <port>
set vdom <string>
set fortilink enable
next
end
To configure a FortiLink interface in the GUI:
1. Go to WiFi & Switch Controller > FortiLink Interface (click Create New if more than one interface has FortiLink
enabled).
FortiOS 6.4.2 Administration Guide 1607
Fortinet Inc.
Switch Controller
2. Configure the settings as needed.
3. Click Apply.
Viewing managed FortiSwitches
The Managed FortiSwitch page includes three view options: List, Group, and Topology. FortiSwitch names and serial
numbers can be used as parameters in the Search function.
FortiOS 6.4.2 Administration Guide 1608
Fortinet Inc.
Switch Controller
To view managed FortiSwitches:
1. Go to WiFi & Switch Controller > Managed FortiSwitch.
2. In the toolbar menu, use the dropdown list to change views.
l List view, which includes donut charts for device status and model:
l Group view:
l Topology view:
Hover over a link between switch ports to view the tooltip:
FortiOS 6.4.2 Administration Guide 1609
Fortinet Inc.
Switch Controller
In the toolbar menu, use the dropdown list to view the Managed ForitSwitch page of downstream Security
Fabric members:
Register FortiSwitch to FortiCloud
After authorizing a FortiSwitch, administrators can register the FortiSwitch to FortiCloud directly from the FortiOS GUI.
FortiOS 6.4.2 Administration Guide 1610
Fortinet Inc.
Switch Controller
To register the FortiSwitch in the GUI:
1. Go to WiFi & Switch Controller > Managed FortiSwitch and ensure the Topology view is selected.
2. In the topology, right-click on an unregistered device and click Registration.
3. Complete the device registration wizard:
a. Click Register to proceed.
FortiOS 6.4.2 Administration Guide 1611
Fortinet Inc.
Switch Controller
b. Enter the FortiCloud account information and click Submit.
The registration information is submitted to FortiCare, and FortiOS attempts to collect the registration status
from FortiGuard. Since FortiGuard and FortiCare synchronize periodically, the registration status may not
update immediately (it may take up to a few hours).
c. Click Close.
4. After a while, go back to WiFi & Switch Controller > Managed FortiSwitch.
5. Right-click on the device and click Registration. The device is shown as Registered to the corresponding FortiCloud
account.
FortiOS 6.4.2 Administration Guide 1612
Fortinet Inc.
Switch Controller
To register the FortiSwitch in the CLI:
# diagnose forticare direct-registration product-registration -N S124DP3X15000000 -a
[email protected] -p LDAP -T "CA" -R "other" -e 1
Account info:
contract_number=[] account_id=[[email protected]] password=[***]
reseller_id=0 reseller=[other]
first_name=[] last_name=[] company=[]
title=[] address=[] city=[]
state=[] state_code=[] country_code=0
post_code=[] phone=[] fax=[]
industry=[] industry_id=0 orgsize=[] orgsize_id=0
version=0 SN=[S124DP3X15000000] existing=1
Prepare to register product into this account.
Do you want to continue? (y/n)y
Registration successful
VLAN interface templates for FortiSwitches
You can create configuration templates that define the VLAN interfaces and are applied to new FortiSwitch devices
when they are discovered and managed by the FortiGate.
For each VDOM, you can create templates, and then assign those templates to the automatically created switch VLAN
interfaces for six types of traffic. The network subnet that is reserved for the switch controller can also be customized.
To ensure that switch VLAN interface names are unique for each system, the following naming rules are used:
l root VDOM: the interface names are the same as the template names.
l other VDOMs: the interface name is created from the template name and the SNMP index of the interface. For
example, if the template name is quarantined and the SNMP index is 29, then the interface name is quarantined.29.
You can also customize the FortiLink management VLAN per FortiLink interface:
config system interface
edit <fortilink interface>
FortiOS 6.4.2 Administration Guide 1613
Fortinet Inc.
Switch Controller
set fortilink enable
set switch-controller-mgmt-vlan <integer>
next
end
The management VLAN can be a number from 1 to 4094. the default value is 4094.
Create VLAN interface templates
To configure the VLAN interface templates:
config switch-controller initial-config template
edit <template_name>
set vlanid <integer>
set ip <ip/netmask>
set allowaccess {options}
set auto-ip {enable | disable}
set dhcp-server {enable | disable}
next
end
<template_name> The name, or part of the name, of the template.
vlanid <integer> The unique VLAN ID for the type of traffic the template is assigned to (1 - 4094,
default = 4094)
ip <ip/netmask> The IP address and subnet mask of the switch VLAN interface. This can only be
configured when auto-ip is disabled.
allowaccess {options} The permitted types of management access to this interface.
auto-ip {enable | disable} When enabled, the switch-controller will pick an unused 24 bit subnet from the
switch-controller-reserved-network (configured in config system
global).
dhcp-server {enable | disable} When enabled, the switch-controller will create a DHCP server for the switch
VLAN interface
To assign the templates to the specific traffic types:
config switch-controller initial-config vlans
set default-vlan <template>
set quarantine <template>
set rspan <template>
set voice <template>
set video <template>
set nac <template>
end
default-vlan <template> Default VLAN assigned to all switch ports upon discovery.
quarantine <template> VLAN for quarantined traffic.
rspan <template> VLAN for RSPAN/ERSPAN mirrored traffic.
FortiOS 6.4.2 Administration Guide 1614
Fortinet Inc.
Switch Controller
voice <template> VLAN dedicated for voice devices.
video <template> VLAN dedicated for video devices.
nac <template> VLAN for NAC onboarding devices.
To configure the network subnet that is reserved for the switch controller:
config system global
set switch-controller-reserved-network <ip/netmask>
end
The default value is 169.254.0.0 255.255.0.0.
Example
In this example, six templates are configured with different VLAN IDs. Except for the default template, all of them have
DHCP server enabled. When a FortiSwitch is discovered, VLANs and the corresponding DHCP servers are
automatically created.
To configure six templates and apply them to VLAN traffic types:
config switch-controller initial-config template
edit "default"
set vlanid 1
set auto-ip disable
next
edit "quarantine"
set vlanid 4093
set dhcp-server enable
next
edit "rspan"
set vlanid 4092
set dhcp-server enable
next
edit "voice"
set vlanid 4091
set dhcp-server enable
next
edit "video"
set vlanid 4090
set dhcp-server enable
next
edit "onboarding"
set vlanid 4089
set dhcp-server enable
next
end
config switch-controller initial-config vlans
set default-vlan "default"
set quarantine "quarantine"
set rspan "rspan"
set voice "voice"
FortiOS 6.4.2 Administration Guide 1615
Fortinet Inc.
Switch Controller
set video "video"
set nac "onboarding"
end
To see the automatically created VLANs and DHCP servers:
show system interface
edit "default"
set vdom "root"
set snmp-index 24
set switch-controller-feature default-vlan
set interface "fortilink"
set vlanid 1
next
edit "quarantine"
set vdom "root"
set ip 169.254.11.1 255.255.255.0
set description "Quarantine VLAN"
set security-mode captive-portal
set replacemsg-override-group "auth-intf-quarantine"
set device-identification enable
set snmp-index 25
set switch-controller-access-vlan enable
set switch-controller-feature quarantine
set color 6
set interface "fortilink"
set vlanid 4093
next
...
end
show system dhcp server
edit 2
set dns-service local
set ntp-service local
set default-gateway 169.254.1.1
set netmask 255.255.255.0
set interface "fortilink"
config ip-range
edit 1
set start-ip 169.254.1.2
set end-ip 169.254.1.254
next
end
set vci-match enable
set vci-string "FortiSwitch" "FortiExtender"
next
edit 3
set dns-service default
set default-gateway 169.254.11.1
set netmask 255.255.255.0
set interface "quarantine"
config ip-range
edit 1
set start-ip 169.254.11.2
set end-ip 169.254.11.254
next
FortiOS 6.4.2 Administration Guide 1616
Fortinet Inc.
Switch Controller
end
set timezone-option default
next
...
end
FortiLink auto network configuration policy
The switch controller has a network auto-config option which contains configurable defaults, policy customization,
and an individual interface override. This gives administrators simple and flexible control.
Following is a description of these options:
auto-config Provides the default actions for the first hop (fgt-policy) and lower-tier devices (isl-
default policy).
auto-config A database containing policies that can be applied as a system-wide default or to a specific
policy interface.
auto-config Allows for the override of the auto-config default on a specific interface. This
custom information is retained and is reapplied if an interface leaves and then is rediscovered.
To configure automatic network detection:
1. Create or modify an auto-config policy:
config switch-controller auto-config policy
edit "test123"
set qos-policy default --------> leverage the default qos-policy
set storm-control-policy auto-config --------> leverage auto-config storm-
control-policy by default
set poe-status enable --------> If target of auto-config is poe port, keep
poe-status enabled by default
next
end
2. Designate the default auto-config policy to FortiLink, ISL, or ICL on managed FortiSwitch devices:
config switch-controller auto-config default
set fgt-policy test123
set isl-policy test123
set icl-policy test123
end
3. Customize an auto-config policy for a specific FGT, ICL, or ISL interface.
config switch-controller auto-config custom
edit "G5H0E391790XXXX"
config switch-binding
edit "S524DN4K1500XXXX"
set policy <policy>
next
end
FortiOS 6.4.2 Administration Guide 1617
Fortinet Inc.
Switch Controller
next
end
FortiLink network sniffer extension
The switch controller has a traffic-sniffer option to provide a targeted approach where mirrored traffic is always
directed towards the FortiGate on a dedicated VLAN. This allows for easy sniffing by using the CLI or GUI. Also, the
traffic can be routed through the FortiGate using Encapsulated Remote Switched Port Analyzer (ERSPAN) for external
analysis and storage.
Use this option to define targeted sniffers by IP or MAC address. Traffic matching is replicated to the FortiGate, which is
helpful when you know what device you are looking for but don't know where it is located.
FortiLink networks can have multiple switches and traffic typically traverses several switches. If each switch mirrors any
match, the sniffer would see multiple copies of traffic. To reduce this, the targets are applied at the perimeter of the
FortiSwitch network. Traffic entering by a user port or traffic from FortiGate is considered eligible for mirroring.
You can also enable traditional port-based sniffers in the ingress or egress direction.
All sniffer traffic arrives at the FortiGate using ERSPAN and the traffic is encapsulated in generic routing encapsulation
(GRE).
You can only configure this feature using the CLI.
FortiOS 6.4.2 Administration Guide 1618
Fortinet Inc.
Switch Controller
To use predefined sniffer-used switch VLAN interface:
config system interface
edit "snf.aggr1" <---- Created automatically, once first FSW discovered and
authorized.
set vdom "root"
set ip 10.254.253.254 255.255.254.0
set allowaccess ping
set description "Sniffer VLAN"
set snmp-index 33
set switch-controller-traffic-policy "sniffer"
set color 6
set interface "aggr1"
set vlanid 4092
next
end
To enable traffic sniffer based on target IP or MAC address on target ports of managed FortiSwitch
units:
config switch-controller traffic-sniffer
set erspan-ip 2.2.2.2
config target-mac
edit 11:11:11:11:11:11
next
end
config target-ip
edit 4.4.4.4
next
end
config target-port
edit "S524DN4K1500XXXX"
set in-ports "port2" "port4" "port6"
set out-ports "port3" "port5" "port7"
next
end
end
To use troubleshooting tools:
(root) # diagnose switch-controller switch-info mirror status S524DN4K1500XXXX
Managed Switch : S524DN4K1500XXXX
flink.sniffer
Mode : ERSPAN-auto
Status : Active
Source-Ports:
Ingress: port2, port4, port6
Egress : port3, port5, port7
Used-by-ACLs : True
Auto-config-state : Resolved/Running
Last-update : 1464 seconds ago
Issues : None
Collector-IP : 2.2.2.2
Source-IP : 10.254.252.208
Source-MAC : 08:5b:0e:ff:40:27
FortiOS 6.4.2 Administration Guide 1619
Fortinet Inc.
Switch Controller
Next-Hop :
IP : 10.254.253.254
MAC : 00:09:0f:09:00:0c
Via-System-Interface : sniffer
VLAN : 4092(tagged)
Via-Switch-Interface : G5H0E391790XXXX
FortiLink MCLAG configuration
In WiFi & Switch Controller > FortiSwitch Ports, you can enable MCLAG and view ports grouped by trunks. You need to
configure ports from two switches, that is, two MCLAG peer switches to be included in one MCLAG.
Sample configuration
In WiFi & Switch Controller > FortiSwitch Ports, there is an MC-LAG option.
FortiOS 6.4.2 Administration Guide 1620
Fortinet Inc.
Switch Controller
In WiFi & Switch Controller > FortiSwitch Ports, there is a Trunk view.
Allow FortiSwitch Trunk mode selection on FortiGate
In an LACP trunk, ports with the same negotiated speed are grouped into an aggregator. Setting the aggregator mode
allows you to select the aggregator based on either the bandwidth or the number of links.
FortiSwitch version 6.4.0 and later are supported.
To configure the aggregator mode for a FortiSwitch managed by FortiGate:
config switch-controller managed-switch
edit <switch>
config ports
edit "trunk_server1"
set aggregator-mode {bandwidth | count}
set vlan "default.13"
set type trunk
set mac-addr 90:6c:ac:de:35:fe
set mode lacp-active
set members "port11" "port12"
next
end
next
end
Where:
bandwidth The aggregator with the largest bandwidth is selected (default).
count The aggregator with the largest number of ports is selected.
FortiOS 6.4.2 Administration Guide 1621
Fortinet Inc.
Switch Controller
Standalone FortiGate as switch controller
The following topics provide instructions on configuring a standalone FortiGate as a switch controller:
l Standalone FortiGate as switch controller
l Multiple FortiSwitches managed via hardware/software switch on page 1625
l Multiple FortiSwitches in tiers via aggregate interface with redundant link enabled on page 1629
l Multiple FortiSwitches in tiers via aggregate interface with MCLAG enabled only on distribution on page 1633
Standalone FortiGate as switch controller
In this example, one FortiSwitch is managed by a standalone FortiGate. The FortiGate uses an aggregate interface to
operate as a switch controller. This configuration might be used in branch office. It might also be used before increasing
the number of connected FortiSwitch units and evolving to a multi-tier structure.
Prerequisites:
l The FortiGate model supports an aggregate interface.
l FortiSwitch units have been upgraded to latest released software version.
l Layer-3 path/route in the management VDOM is available to Internet so that the FortiSwitch units can synchronize
NTP.
FortiOS 6.4.2 Administration Guide 1622
Fortinet Inc.
Switch Controller
Change the FortiSwitch management mode to FortiLink:
Enter the following CLI commands on the FortiSwitch:
config system global
set switch-mgmt-mode fortilink
end
This operation will cleanup all of the configuration and reboot the system!
Do you want to continue? (y/n)y
Backing up local mode config before entering FortiLink mode....
If the FortiSwitch ports used for the FortiLink connection have auto-discovery-fortilink enabled, executing
authorization on FortiGate will trigger the transformation to FortiLink mode automatically.
config switch interface
edit "port1"
set auto-discovery-fortilink enable
……
next
end
Create an aggregate interface and designate it as FortiLink interface on the FortiGate:
Using the CLI:
config system interface
edit "aggr1"
set vdom "vdom1"
set fortilink enable
set type aggregate
set member "port11" "port12"
next
end
Using the GUI:
1. Go to WiFi & Switch Controller > FortiLink Interface.
2. In Interface members, select an existing aggregate interface (if there is one) or select one or more physical ports to
create an aggregate interface.
3. Configure other fields as necessary.
4. Click OK.
Discover and authorize the FortiSwitch:
Using the CLI:
config switch-controller managed-switch
edit "FSWSerialNum"
set fsw-wan1-admin enable
……
next
end
Check the CLI output for Connection: Connected to show that FortiLink is up:
execute switch-controller get-conn-status FSWSerialNum
Get managed-switch S248EPTF18001384 connection status:
FortiOS 6.4.2 Administration Guide 1623
Fortinet Inc.
Switch Controller
Admin Status: Authorized
Connection: Connected
Image Version: S248EP-v6.2.0-build143,190107 (Interim)
Remote Address: 2.2.2.2
Join Time: Fri Jan 11 15:22:32 2019
interface status duplex speed fortilink stacking poe status
port1 up full 1000Mbps no no Delivering Power
port2 down N/A 0 no no Searching
……
Using the GUI:
1. Go to WiFi & Switch Controller > Managed FortiSwitch.
2. Click Authorize and wait for a few minutes for the connection to be established.
When FortiLink between the FortiGate and FortiSwitch is established, the Link-up ports change to green and the
POE port that is supplying power changes to blue. The dotted line between the FortiGate and FortiSwitch changes
to a solid line. The Connection status shows that FortiLink is up.
Extend the security perimeter to the edge of FortiSwitch:
1. Configure the VLAN arrangement.
a. On the FortiGate, go to WiFi & Switch Controller > FortiSwitch VLANs.
b. Configure the VLAN interfaces that are applied on FortiSwitch.
On FortiGate, these switch VLAN interfaces are treated as layer-3 interfaces and are available to be applied by
firewall policy and other security controls in FortiOS. This means that security boundary is extended to
FortiSwitch.
2. Configure FortiSwitch ports.
a. On the FortiGate, go to WiFi & Switch Controller > FortiSwitch Ports.
b. Select one or more FortiSwitch ports and assign them to the switch VLAN.
c. You can also select POE/DHCP Snooping, STP, and other parameters for the FortiSwitch ports to show their
real-time status such as link status, data statistics, etc.
3. Configure access authentication.
a. On the FortiGate, go to WiFi & Switch Controller > FortiSwitch Security Policies.
b. Configure the 802.1X security policies.
c. Select Port-based or MAC-based mode and select User groups from the existing VDOM.
d. Configure other fields as necessary.
e. Go to WiFi & Switch Controller > FortiSwitch Ports.
f. Select one or more FortiSwitch ports, click + in the Security Policy column, then make a selection from the
pane.
Troubleshooting
Authorized FortiSwitch always offline
If an authorized FortiSwitch is always offline, go to the FortiGate CLI and use the command below to see all the
checkpoints. Inspect each checkpoint to find the cause of the problem.
execute switch-controller diagnose-connection S248EPTF18001384
Fortilink interface ... OK
FortiOS 6.4.2 Administration Guide 1624
Fortinet Inc.
Switch Controller
aggr1 enabled
DHCP server ... OK
aggr1 enabled
NTP server ... OK
aggr1 enabled
NTP server sync ... OK
synchronized: yes, ntpsync: enabled, server-mode: enabled
ipv4 server(ntp1.fortiguard.com) 208.91.113.70 -- reachable(0x80) S:2 T:128
no data
ipv4 server(ntp2.fortiguard.com) 208.91.113.71 -- reachable(0x80) S:2 T:128
no data
ipv4 server(ntp2.fortiguard.com) 208.91.112.51 -- reachable(0xff) S:2 T:66 selected
server-version=4, stratum=2
reference time is dfe3aec5.744404e6 -- UTC Sat Jan 12 00:09:41 2019
clock offset is -0.320411 sec, root delay is 0.054535 sec
root dispersion is 0.533081 sec, peer dispersion is 11495 msec
ipv4 server(ntp1.fortiguard.com) 208.91.112.50 -- reachable(0xff) S:2 T:66
server-version=4, stratum=2
reference time is dfe3aec5.744404e6 -- UTC Sat Jan 12 00:09:41 2019
clock offset is -0.448087 sec, root delay is 0.054535 sec
root dispersion is 0.533081 sec, peer dispersion is 12542 msec
HA mode ... disabled
Fortilink
Status ... SWITCH_AUTHORIZED_READY
Last keepalive ... 1 seconds ago
CAPWAP
Remote Address: 2.2.2.2
Status ... CONNECTED
Last keepalive ... 26 seconds ago
PING 2.2.2.2 (2.2.2.2): 56 data bytes
64 bytes from 2.2.2.2: icmp_seq=0 ttl=64 time=1.1 ms
64 bytes from 2.2.2.2: icmp_seq=1 ttl=64 time=13.9 ms
64 bytes from 2.2.2.2: icmp_seq=2 ttl=64 time=12.7 ms
64 bytes from 2.2.2.2: icmp_seq=3 ttl=64 time=2.9 ms
64 bytes from 2.2.2.2: icmp_seq=4 ttl=64 time=1.2 ms
--- 2.2.2.2 ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 1.1/6.3/13.9 ms
Multiple FortiSwitches managed via hardware/software switch
This example provides a recommended configuration of FortiLink where multiple FortiSwitches are managed by a
standalone FortiGate as switch controller via hardware or software switch interface; such as when you need multiple
distribution FortiSwitches but lack supporting aggregate on FortiGate.
FortiOS 6.4.2 Administration Guide 1625
Fortinet Inc.
Switch Controller
Prerequisites:
l The FortiGate model supports hardware or software switch interface.
l FortiSwitch units have been upgraded to latest released software version.
l Layer-3 path/route in the management VDOM is available to Internet so that the FortiSwitch units can synchronize
NTP.
Change the FortiSwitch management mode to FortiLink:
Enter the following CLI commands on the FortiSwitch:
config system global
set switch-mgmt-mode fortilink
end
This operation will cleanup all of the configuration and reboot the system!
Do you want to continue? (y/n)y
Backing up local mode config before entering FortiLink mode....
If the FortiSwitch ports used for the FortiLink connection have auto-discovery-fortilink enabled, executing
authorization on FortiGate will trigger the transformation to FortiLink mode automatically.
config switch interface
edit "port1"
set auto-discovery-fortilink enable
……
next
end
Create hardware or software switch interface and designate it as FortiLink interface on the FortiGate:
Create a hardware switch using the CLI:
FortiOS 6.4.2 Administration Guide 1626
Fortinet Inc.
Switch Controller
config system virtual-switch
edit "hardswitch1"
set physical-switch "sw0"
config port
edit "port11"
next
edit "port12"
next
end
next
end
Create a software switch using the CLI:
config system switch-interface
edit "softswitch1"
set vdom "vdom1"
set member "port11" "port12"
next
end
Using the GUI:
1. Go to WiFi & Switch Controller > FortiLink Interface.
2. In Interface members, select an existing hardware/software switch interface (if there is one) or select one or more
physical ports to create a hardware/software switch interface.
3. Configure other fields as necessary.
4. Click OK.
Discover and authorize the FortiSwitch:
Using the CLI:
config switch-controller managed-switch
edit "FSWSerialNum"
set fsw-wan1-admin enable
……
next
end
Check the CLI output for Connection: Connected to show that FortiLink is up:
execute switch-controller get-conn-status FSWSerialNum
Get managed-switch S248EPTF18001384 connection status:
Admin Status: Authorized
Connection: Connected
Image Version: S248EP-v6.2.0-build143,190107 (Interim)
Remote Address: 2.2.2.2
Join Time: Fri Jan 11 15:22:32 2019
interface status duplex speed fortilink stacking poe status
port1 up full 1000Mbps no no Delivering Power
port2 down N/A 0 no no Searching
……
Using the GUI:
FortiOS 6.4.2 Administration Guide 1627
Fortinet Inc.
Switch Controller
1. Go to WiFi & Switch Controller > Managed FortiSwitch.
2. Click Authorize and wait for a few minutes for the connection to be established.
When FortiLink between the FortiGate and FortiSwitch is established, the Link-up ports change to green and the
POE port that is supplying power changes to blue. The dotted line between the FortiGate and FortiSwitch changes
to a solid line. The Connection status shows that FortiLink is up.
Extend the security perimeter to the edge of FortiSwitch:
1. Configure the VLAN arrangement.
a. On the FortiGate, go to WiFi & Switch Controller > FortiSwitch VLANs.
b. Configure the VLAN interfaces that are applied on FortiSwitch.
On FortiGate, these switch VLAN interfaces are treated as layer-3 interfaces and are available to be applied by
firewall policy and other security controls in FortiOS. This means that security boundary is extended to
FortiSwitch.
2. Configure FortiSwitch ports.
a. On the FortiGate, go to WiFi & Switch Controller > FortiSwitch Ports.
b. Select one or more FortiSwitch ports and assign them to the switch VLAN.
c. You can also select POE/DHCP Snooping, STP, and other parameters for the FortiSwitch ports to show their
real-time status such as link status, data statistics, etc.
3. Configure access authentication.
a. On the FortiGate, go to WiFi & Switch Controller > FortiSwitch Security Policies.
b. Configure the 802.1X security policies.
c. Select Port-based or MAC-based mode and select User groups from the existing VDOM.
d. Configure other fields as necessary.
e. Go to WiFi & Switch Controller > FortiSwitch Ports.
f. Select one or more FortiSwitch ports, click + in the Security Policy column, then make a selection from the
pane.
Troubleshooting
Bind FortiLink on hardware switch interface
Fortinet recommends binding FortiLink on the hardware switch interface. Since the hardware switch interface can
leverage hardware chips to forward traffic, it does not consume CPU capacity, unlike a software switch.
Authorized FortiSwitch always offline
If an authorized FortiSwitch is always offline, go to the FortiGate CLI and use the command below to see all the
checkpoints. Inspect each checkpoint to find the cause of the problem.
execute switch-controller diagnose-connection S248EPTF18001384
Fortilink interface ... OK
hardswitch1 enabled
DHCP server ... OK
hardswitch1 enabled
NTP server ... OK
hardswitch1 enabled
FortiOS 6.4.2 Administration Guide 1628
Fortinet Inc.
Switch Controller
NTP server sync ... OK
synchronized: yes, ntpsync: enabled, server-mode: enabled
ipv4 server(ntp1.fortiguard.com) 208.91.113.70 -- reachable(0x80) S:2 T:128
no data
ipv4 server(ntp2.fortiguard.com) 208.91.113.71 -- reachable(0x80) S:2 T:128
no data
ipv4 server(ntp2.fortiguard.com) 208.91.112.51 -- reachable(0xff) S:2 T:66 selected
server-version=4, stratum=2
reference time is dfe3aec5.744404e6 -- UTC Sat Jan 12 00:09:41 2019
clock offset is -0.320411 sec, root delay is 0.054535 sec
root dispersion is 0.533081 sec, peer dispersion is 11495 msec
ipv4 server(ntp1.fortiguard.com) 208.91.112.50 -- reachable(0xff) S:2 T:66
server-version=4, stratum=2
reference time is dfe3aec5.744404e6 -- UTC Sat Jan 12 00:09:41 2019
clock offset is -0.448087 sec, root delay is 0.054535 sec
root dispersion is 0.533081 sec, peer dispersion is 12542 msec
HA mode ... disabled
Fortilink
Status ... SWITCH_AUTHORIZED_READY
Last keepalive ... 1 seconds ago
CAPWAP
Remote Address: 2.2.2.2
Status ... CONNECTED
Last keepalive ... 26 seconds ago
PING 2.2.2.2 (2.2.2.2): 56 data bytes
64 bytes from 2.2.2.2: icmp_seq=0 ttl=64 time=1.1 ms
64 bytes from 2.2.2.2: icmp_seq=1 ttl=64 time=13.9 ms
64 bytes from 2.2.2.2: icmp_seq=2 ttl=64 time=12.7 ms
64 bytes from 2.2.2.2: icmp_seq=3 ttl=64 time=2.9 ms
64 bytes from 2.2.2.2: icmp_seq=4 ttl=64 time=1.2 ms
--- 2.2.2.2 ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 1.1/6.3/13.9 ms
Multiple FortiSwitches in tiers via aggregate interface with redundant link enabled
This example provides a recommended configuration of FortiLink where multi-tier FortiSwitches are managed by a
standalone FortiGate as switch controller via aggregate interface, where the FortiGate can provide redundant links to
multiple distribution FortiSwitches.
Prerequisites:
l The FortiGate model supports an aggregate interface.
l FortiSwitch units have been upgraded to latest released software version.
l Layer-3 path/route in the management VDOM is available to Internet so that the FortiSwitch units can synchronize
NTP.
FortiOS 6.4.2 Administration Guide 1629
Fortinet Inc.
Switch Controller
To change the FortiSwitch management mode to FortiLink:
Enter the following CLI commands on the FortiSwitch:
config system global
set switch-mgmt-mode fortilink
end
This operation will cleanup all of the configuration and reboot the system!
Do you want to continue? (y/n)y
Backing up local mode config before entering FortiLink mode....
If the FortiSwitch ports used for the FortiLink connection have auto-discovery-fortilink enabled, executing
authorization on FortiGate will trigger the transformation to FortiLink mode automatically.
config switch interface
edit "port1"
set auto-discovery-fortilink enable
……
next
end
To create an aggregate interface and designate it as FortiLink interface on the FortiGate:
Using the CLI:
config system interface
edit "aggr1"
set vdom "vdom1"
set fortilink enable
set type aggregate
set member "port11" "port12"
set fortilink-split-interface enable
FortiOS 6.4.2 Administration Guide 1630
Fortinet Inc.
Switch Controller
next
end
Using the GUI:
1. Go to WiFi & Switch Controller > FortiLink Interface.
2. In Interface members, select one or more physical ports that are connected to different distribution FortiSwitches to
create an aggregate interface.
3. Enable FortiLink split interface.
4. Configure other fields as necessary.
5. Click OK.
To discover and authorize the FortiSwitch:
Using the CLI:
config switch-controller managed-switch
edit "FSWSerialNum"
set fsw-wan1-admin enable
……
next
end
Check the CLI output for Connection: Connected to show that FortiLink is up:
execute switch-controller get-conn-status FSWSerialNum
Get managed-switch S248EPTF18001384 connection status:
Admin Status: Authorized
Connection: Connected
Image Version: S248EP-v6.2.0-build143,190107 (Interim)
Remote Address: 2.2.2.2
Join Time: Fri Jan 11 15:22:32 2019
interface status duplex speed fortilink stacking poe status
port1 up full 1000Mbps no no Delivering Power
port2 down N/A 0 no no Searching
……
Using the GUI:
1. Go to WiFi & Switch Controller > Managed FortiSwitch.
2. Click Authorize and wait for a few minutes for the connection to be established.
When FortiLink between the FortiGate and FortiSwitch is established, the Link-up ports change to green and the
POE port that is supplying power changes to blue. The dotted line between the FortiGate and FortiSwitch changes
to a solid line. The Connection status shows that FortiLink is up.
To extend the security perimeter to the edge of FortiSwitch:
1. Configure the VLAN arrangement.
a. On the FortiGate, go to WiFi & Switch Controller > FortiSwitch VLANs.
b. Configure the VLAN interfaces that are applied on FortiSwitch.
On FortiGate, these switch VLAN interfaces are treated as layer-3 interfaces and are available to be applied by
firewall policy and other security controls in FortiOS. This means that security boundary is extended to
FortiSwitch.
FortiOS 6.4.2 Administration Guide 1631
Fortinet Inc.
Switch Controller
2. Configure FortiSwitch ports.
a. On the FortiGate, go to WiFi & Switch Controller > FortiSwitch Ports.
b. Select one or more FortiSwitch ports and assign them to the switch VLAN.
c. You can also select POE/DHCP Snooping, STP, and other parameters for the FortiSwitch ports to show their
real-time status such as link status, data statistics, etc.
3. Configure access authentication.
a. On the FortiGate, go to WiFi & Switch Controller > FortiSwitch Security Policies.
b. Configure the 802.1X security policies.
c. Select Port-based or MAC-based mode and select User groups from the existing VDOM.
d. Configure other fields as necessary.
e. Go to WiFi & Switch Controller > FortiSwitch Ports.
f. Select one or more FortiSwitch ports, click + in the Security Policy column, then make a selection from the
pane.
Troubleshooting
Authorized FortiSwitch always offline
If an authorized FortiSwitch is always offline, go to the FortiGate CLI and use the command below to see all the
checkpoints. Inspect each checkpoint to find the cause of the problem.
execute switch-controller diagnose-connection S248EPTF18001384
Fortilink interface ... OK
aggr1 enabled
DHCP server ... OK
aggr1 enabled
NTP server ... OK
aggr1 enabled
NTP server sync ... OK
synchronized: yes, ntpsync: enabled, server-mode: enabled
ipv4 server(ntp1.fortiguard.com) 208.91.113.70 -- reachable(0x80) S:2 T:128
no data
ipv4 server(ntp2.fortiguard.com) 208.91.113.71 -- reachable(0x80) S:2 T:128
no data
ipv4 server(ntp2.fortiguard.com) 208.91.112.51 -- reachable(0xff) S:2 T:66 selected
server-version=4, stratum=2
reference time is dfe3aec5.744404e6 -- UTC Sat Jan 12 00:09:41 2019
clock offset is -0.320411 sec, root delay is 0.054535 sec
root dispersion is 0.533081 sec, peer dispersion is 11495 msec
ipv4 server(ntp1.fortiguard.com) 208.91.112.50 -- reachable(0xff) S:2 T:66
server-version=4, stratum=2
reference time is dfe3aec5.744404e6 -- UTC Sat Jan 12 00:09:41 2019
clock offset is -0.448087 sec, root delay is 0.054535 sec
root dispersion is 0.533081 sec, peer dispersion is 12542 msec
HA mode ... disabled
Fortilink
FortiOS 6.4.2 Administration Guide 1632
Fortinet Inc.
Switch Controller
Status ... SWITCH_AUTHORIZED_READY
Last keepalive ... 1 seconds ago
CAPWAP
Remote Address: 2.2.2.2
Status ... CONNECTED
Last keepalive ... 26 seconds ago
PING 2.2.2.2 (2.2.2.2): 56 data bytes
64 bytes from 2.2.2.2: icmp_seq=0 ttl=64 time=1.1 ms
64 bytes from 2.2.2.2: icmp_seq=1 ttl=64 time=13.9 ms
64 bytes from 2.2.2.2: icmp_seq=2 ttl=64 time=12.7 ms
64 bytes from 2.2.2.2: icmp_seq=3 ttl=64 time=2.9 ms
64 bytes from 2.2.2.2: icmp_seq=4 ttl=64 time=1.2 ms
--- 2.2.2.2 ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 1.1/6.3/13.9 ms
Multiple FortiSwitches in tiers via aggregate interface with MCLAG enabled only on
distribution
This example provides a recommended configuration of FortiLink where multi-tier FortiSwitches are managed by a
standalone FortiGate as switch controller via aggregate interface, where the FortiGate can provide active-active links to
two distribution FortiSwitches connected to each other by MCLAG.
Prerequisites:
l The FortiGate model supports an aggregate interface.
l FortiSwitch units have been upgraded to latest released software version.
l Layer-3 path/route in the management VDOM is available to Internet so that the FortiSwitch units can synchronize
NTP.
l For the FortiSwitch D series, the models above 4 just support MCLAG. For the FortiSwitch E series, the models
above 2 just support MCLAG.
FortiOS 6.4.2 Administration Guide 1633
Fortinet Inc.
Switch Controller
To change the FortiSwitch management mode to FortiLink:
Enter the following CLI commands on the FortiSwitch:
config system global
set switch-mgmt-mode fortilink
end
This operation will cleanup all of the configuration and reboot the system!
Do you want to continue? (y/n)y
Backing up local mode config before entering FortiLink mode....
If the FortiSwitch ports used for the FortiLink connection have auto-discovery-fortilink enabled, executing
authorization on FortiGate will trigger the transformation to FortiLink mode automatically.
config switch interface
edit "port1"
set auto-discovery-fortilink enable
……
next
end
To create an aggregate interface and designate it as FortiLink interface on the FortiGate:
Using the CLI:
config system interface
edit "aggr1"
set vdom "vdom1"
set fortilink enable
set type aggregate
set member "port11" "port12"
set fortilink-split-interface disable
FortiOS 6.4.2 Administration Guide 1634
Fortinet Inc.
Switch Controller
next
end
fortilink-split-interface must be disabled for MCLAG to work.
Using the GUI:
1. Go to WiFi & Switch Controller > FortiLink Interface.
2. In Interface members, select one or more physical ports that are connected to different distribution FortiSwitches to
create an aggregate interface.
3. Disable FortiLink split interface.
4. Configure other fields as necessary.
5. Click OK.
Discover and authorize the FortiSwitch:
Using the CLI:
config switch-controller managed-switch
edit "FSWSerialNum"
set fsw-wan1-admin enable
……
next
end
Check the CLI output for Connection: Connected to show that FortiLink is up:
execute switch-controller get-conn-status FSWSerialNum
Get managed-switch S248EPTF18001384 connection status:
Admin Status: Authorized
Connection: Connected
Image Version: S248EP-v6.2.0-build143,190107 (Interim)
Remote Address: 2.2.2.2
Join Time: Fri Jan 11 15:22:32 2019
interface status duplex speed fortilink stacking poe status
port1 up full 1000Mbps no no Delivering Power
port2 down N/A 0 no no Searching
……
Using the GUI:
1. Go to WiFi & Switch Controller > Managed FortiSwitch.
2. Click Authorize and wait for a few minutes for the connection to be established.
When FortiLink between the FortiGate and FortiSwitch is established, the Link-up ports change to green and the
POE port that is supplying power changes to blue. The dotted line between the FortiGate and FortiSwitch changes
to a solid line. The Connection status shows that FortiLink is up.
Enable MCLAG on the ICL link between the distribution FortiSwitch devices:
conf switch trunk
edit "4DN4K15000008-0"
set mclag-icl enable
next
end
FortiOS 6.4.2 Administration Guide 1635
Fortinet Inc.
Switch Controller
When you enable mclag-icl, MCLAG on the FortiLink interface is enabled automatically and active-active backup
links between the distribution FortiSwitches are established.
Extend the security perimeter to the edge of FortiSwitch:
1. Configure the VLAN arrangement.
a. On the FortiGate, go to WiFi & Switch Controller > FortiSwitch VLANs.
b. Configure the VLAN interfaces that are applied on FortiSwitch.
On FortiGate, these switch VLAN interfaces are treated as layer-3 interfaces and are available to be applied by
firewall policy and other security controls in FortiOS. This means that security boundary is extended to
FortiSwitch.
2. Configure FortiSwitch ports.
a. On the FortiGate, go to WiFi & Switch Controller > FortiSwitch Ports.
b. Select one or more FortiSwitch ports and assign them to the switch VLAN.
c. You can also select POE/DHCP Snooping, STP, and other parameters for the FortiSwitch ports to show their
real-time status such as link status, data statistics, etc.
3. Configure access authentication.
a. On the FortiGate, go to WiFi & Switch Controller > FortiSwitch Security Policies.
b. Configure the 802.1X security policies.
c. Select Port-based or MAC-based mode and select User groups from the existing VDOM.
d. Configure other fields as necessary.
e. Go to WiFi & Switch Controller > FortiSwitch Ports.
f. Select one or more FortiSwitch ports, click + in the Security Policy column, then make a selection from the
pane.
Troubleshooting
Authorized FortiSwitch always offline
If an authorized FortiSwitch is always offline, go to the FortiGate CLI and use the command below to see all the
checkpoints. Inspect each checkpoint to find the cause of the problem.
execute switch-controller diagnose-connection S248EPTF18001384
Fortilink interface ... OK
aggr1 enabled
DHCP server ... OK
aggr1 enabled
NTP server ... OK
aggr1 enabled
NTP server sync ... OK
synchronized: yes, ntpsync: enabled, server-mode: enabled
ipv4 server(ntp1.fortiguard.com) 208.91.113.70 -- reachable(0x80) S:2 T:128
no data
ipv4 server(ntp2.fortiguard.com) 208.91.113.71 -- reachable(0x80) S:2 T:128
no data
ipv4 server(ntp2.fortiguard.com) 208.91.112.51 -- reachable(0xff) S:2 T:66 selected
server-version=4, stratum=2
FortiOS 6.4.2 Administration Guide 1636
Fortinet Inc.
Switch Controller
reference time is dfe3aec5.744404e6 -- UTC Sat Jan 12 00:09:41 2019
clock offset is -0.320411 sec, root delay is 0.054535 sec
root dispersion is 0.533081 sec, peer dispersion is 11495 msec
ipv4 server(ntp1.fortiguard.com) 208.91.112.50 -- reachable(0xff) S:2 T:66
server-version=4, stratum=2
reference time is dfe3aec5.744404e6 -- UTC Sat Jan 12 00:09:41 2019
clock offset is -0.448087 sec, root delay is 0.054535 sec
root dispersion is 0.533081 sec, peer dispersion is 12542 msec
HA mode ... disabled
Fortilink
Status ... SWITCH_AUTHORIZED_READY
Last keepalive ... 1 seconds ago
CAPWAP
Remote Address: 2.2.2.2
Status ... CONNECTED
Last keepalive ... 26 seconds ago
PING 2.2.2.2 (2.2.2.2): 56 data bytes
64 bytes from 2.2.2.2: icmp_seq=0 ttl=64 time=1.1 ms
64 bytes from 2.2.2.2: icmp_seq=1 ttl=64 time=13.9 ms
64 bytes from 2.2.2.2: icmp_seq=2 ttl=64 time=12.7 ms
64 bytes from 2.2.2.2: icmp_seq=3 ttl=64 time=2.9 ms
64 bytes from 2.2.2.2: icmp_seq=4 ttl=64 time=1.2 ms
--- 2.2.2.2 ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 1.1/6.3/13.9 ms
HA (A-P) mode FortiGate pairs as switch controller
The following topics provide instructions on configuring a FortiGate HA in Active-Passive (A-P) mode as a switch
controller:
l Multiple FortiSwitches managed via hardware/software switch on page 1637
l Multiple FortiSwitches in tiers via aggregate interface with redundant link enabled on page 1641
l Multiple FortiSwitches in tiers via aggregate interface with MCLAG enabled only on distribution on page 1646
Multiple FortiSwitches managed via hardware/software switch
This example provides a recommended configuration of FortiLink where multiple FortiSwitches are managed by an A-P
mode HA cluster of FortiGates as switch controller via hardware or software switch interface. An example of common
usage is when you need multiple distribution FortiSwitches but lack supporting aggregate on the FortiGate pairs.
Prerequisites:
l The FortiGate model supports hardware or software switch interface.
l FortiSwitch units have been upgraded to latest released software version.
FortiOS 6.4.2 Administration Guide 1637
Fortinet Inc.
Switch Controller
l Layer-3 path/route in the management VDOM is available to Internet so that the FortiSwitch units can synchronize
NTP.
Change the FortiSwitch management mode to FortiLink:
Enter the following CLI commands on the FortiSwitch:
config system global
set switch-mgmt-mode fortilink
end
This operation will cleanup all of the configuration and reboot the system!
Do you want to continue? (y/n)y
Backing up local mode config before entering FortiLink mode....
If the FortiSwitch ports used for the FortiLink connection have auto-discovery-fortilink enabled, executing
authorization on FortiGate will trigger the transformation to FortiLink mode automatically.
config switch interface
edit "port1"
set auto-discovery-fortilink enable
……
next
end
Set up an A-P mode HA cluster:
See HA active-passive cluster setup on page 768.
Create hardware or software switch interface and designate it as FortiLink interface on the FortiGate:
Create a hardware switch using the CLI:
FortiOS 6.4.2 Administration Guide 1638
Fortinet Inc.
Switch Controller
config system virtual-switch
edit "hardswitch1"
set physical-switch "sw0"
config port
edit "port11"
next
edit "port12"
next
end
next
end
Create a software switch using the CLI:
config system switch-interface
edit "softswitch1"
set vdom "vdom1"
set member "port11" "port12"
next
end
Using the GUI:
1. Go to WiFi & Switch Controller > FortiLink Interface.
2. In Interface members, select an existing hardware/software switch interface (if there is one) or select one or more
physical ports to create a hardware/software switch interface.
3. Configure other fields as necessary.
4. Click OK.
Discover and authorize the FortiSwitch:
Using the CLI:
config switch-controller managed-switch
edit "FSWSerialNum"
set fsw-wan1-admin enable
……
next
end
Check the CLI output for Connection: Connected to show that FortiLink is up:
execute switch-controller get-conn-status FSWSerialNum
Get managed-switch S248EPTF18001384 connection status:
Admin Status: Authorized
Connection: Connected
Image Version: S248EP-v6.2.0-build143,190107 (Interim)
Remote Address: 2.2.2.2
Join Time: Fri Jan 11 15:22:32 2019
interface status duplex speed fortilink stacking poe status
port1 up full 1000Mbps no no Delivering Power
port2 down N/A 0 no no Searching
……
Using the GUI:
FortiOS 6.4.2 Administration Guide 1639
Fortinet Inc.
Switch Controller
1. Go to WiFi & Switch Controller > Managed FortiSwitch.
2. Click Authorize and wait for a few minutes for the connection to be established.
When FortiLink between the FortiGate and FortiSwitch is established, the Link-up ports change to green and the
POE port that is supplying power changes to blue. The dotted line between the FortiGate and FortiSwitch changes
to a solid line. The Connection status shows that FortiLink is up.
Extend the security perimeter to the edge of FortiSwitch:
1. Configure the VLAN arrangement.
a. On the FortiGate, go to WiFi & Switch Controller > FortiSwitch VLANs.
b. Configure the VLAN interfaces that are applied on FortiSwitch.
On FortiGate, these switch VLAN interfaces are treated as layer-3 interfaces and are available to be applied by
firewall policy and other security controls in FortiOS. This means that security boundary is extended to
FortiSwitch.
2. Configure FortiSwitch ports.
a. On the FortiGate, go to WiFi & Switch Controller > FortiSwitch Ports.
b. Select one or more FortiSwitch ports and assign them to the switch VLAN.
c. You can also select POE/DHCP Snooping, STP, and other parameters for the FortiSwitch ports to show their
real-time status such as link status, data statistics, etc.
3. Configure access authentication.
a. On the FortiGate, go to WiFi & Switch Controller > FortiSwitch Security Policies.
b. Configure the 802.1X security policies.
c. Select Port-based or MAC-based mode and select User groups from the existing VDOM.
d. Configure other fields as necessary.
e. Go to WiFi & Switch Controller > FortiSwitch Ports.
f. Select one or more FortiSwitch ports, click + in the Security Policy column, then make a selection from the
pane.
Troubleshooting
Bind FortiLink on hardware switch interface
Fortinet recommends binding FortiLink on the hardware switch interface. Since the hardware switch interface can
leverage hardware chips to forward traffic, it does not consume CPU capacity, unlike a software switch.
Authorized FortiSwitch always offline
If an authorized FortiSwitch is always offline, go to the FortiGate CLI and use the command below to see all the
checkpoints. Inspect each checkpoint to find the cause of the problem.
# execute switch-controller diagnose-connection S248EPTF18001384
Fortilink interface ... OK
hardswitch1 enabled
DHCP server ... OK
hardswitch1 enabled
NTP server ... OK
FortiOS 6.4.2 Administration Guide 1640
Fortinet Inc.
Switch Controller
hardswitch1 enabled
NTP server sync ... OK
synchronized: yes, ntpsync: enabled, server-mode: enabled
ipv4 server(ntp1.fortiguard.com) 208.91.113.70 -- reachable(0x80) S:2 T:128
no data
ipv4 server(ntp2.fortiguard.com) 208.91.113.71 -- reachable(0x80) S:2 T:128
no data
ipv4 server(ntp2.fortiguard.com) 208.91.112.51 -- reachable(0xff) S:2 T:66 selected
server-version=4, stratum=2
reference time is dfe3aec5.744404e6 -- UTC Sat Jan 12 00:09:41 2019
clock offset is -0.320411 sec, root delay is 0.054535 sec
root dispersion is 0.533081 sec, peer dispersion is 11495 msec
ipv4 server(ntp1.fortiguard.com) 208.91.112.50 -- reachable(0xff) S:2 T:66
server-version=4, stratum=2
reference time is dfe3aec5.744404e6 -- UTC Sat Jan 12 00:09:41 2019
clock offset is -0.448087 sec, root delay is 0.054535 sec
root dispersion is 0.533081 sec, peer dispersion is 12542 msec
HA mode ... disabled
Fortilink
Status ... SWITCH_AUTHORIZED_READY
Last keepalive ... 1 seconds ago
CAPWAP
Remote Address: 2.2.2.2
Status ... CONNECTED
Last keepalive ... 26 seconds ago
PING 2.2.2.2 (2.2.2.2): 56 data bytes
64 bytes from 2.2.2.2: icmp_seq=0 ttl=64 time=1.1 ms
64 bytes from 2.2.2.2: icmp_seq=1 ttl=64 time=13.9 ms
64 bytes from 2.2.2.2: icmp_seq=2 ttl=64 time=12.7 ms
64 bytes from 2.2.2.2: icmp_seq=3 ttl=64 time=2.9 ms
64 bytes from 2.2.2.2: icmp_seq=4 ttl=64 time=1.2 ms
--- 2.2.2.2 ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 1.1/6.3/13.9 ms
HA sync fails
If HA sync fails, use the following command to diagnose and locate the cause.
# diagnose sys ha checksum cluster
Multiple FortiSwitches in tiers via aggregate interface with redundant link enabled
This example provides a recommended configuration of FortiLink where multi-tier FortiSwitches are managed by an A-P
mode HA cluster of FortiGates as switch controller via aggregate interface, where each FortiGate cluster member can
provide redundant links to multiple (>=2) distribution FortiSwitches.
FortiOS 6.4.2 Administration Guide 1641
Fortinet Inc.
Switch Controller
Prerequisites:
l The FortiGate model supports an aggregate interface.
l FortiSwitch units have been upgraded to latest released software version.
l Layer-3 path/route in the management VDOM is available to Internet so that the FortiSwitch units can synchronize
NTP.
Change the FortiSwitch management mode to FortiLink:
Enter the following CLI commands on the FortiSwitch:
config system global
set switch-mgmt-mode fortilink
end
This operation will cleanup all of the configuration and reboot the system!
Do you want to continue? (y/n)y
Backing up local mode config before entering FortiLink mode....
If the FortiSwitch ports used for the FortiLink connection have auto-discovery-fortilink enabled, executing
authorization on FortiGate will trigger the transformation to FortiLink mode automatically.
config switch interface
edit "port1"
set auto-discovery-fortilink enable
……
next
end
To set up an A-P mode HA cluster:
See HA active-passive cluster setup on page 768.
FortiOS 6.4.2 Administration Guide 1642
Fortinet Inc.
Switch Controller
To create an aggregate interface and designate it as FortiLink interface on the FortiGate:
Using the CLI:
config system interface
edit "aggr1"
set vdom "vdom1"
set fortilink enable
set type aggregate
set member "port11" "port12"
set fortilink-split-interface enable
next
end
Using the GUI:
1. Go to WiFi & Switch Controller > FortiLink Interface.
2. In Interface members, select one or more physical ports that are connected to different distribution FortiSwitches to
create an aggregate interface.
3. Enable FortiLink split interface.
4. Configure other fields as necessary.
5. Click OK.
Discover and authorize the FortiSwitch:
Using the CLI:
config switch-controller managed-switch
edit "FSWSerialNum"
set fsw-wan1-admin enable
……
next
end
Check the CLI output for Connection: Connected to show that FortiLink is up:
execute switch-controller get-conn-status FSWSerialNum
Get managed-switch S248EPTF18001384 connection status:
Admin Status: Authorized
Connection: Connected
Image Version: S248EP-v6.2.0-build143,190107 (Interim)
Remote Address: 2.2.2.2
Join Time: Fri Jan 11 15:22:32 2019
interface status duplex speed fortilink stacking poe status
port1 up full 1000Mbps no no Delivering Power
port2 down N/A 0 no no Searching
……
Using the GUI:
1. Go to WiFi & Switch Controller > Managed FortiSwitch.
2. Click Authorize and wait for a few minutes for the connection to be established.
When FortiLink between the FortiGate and FortiSwitch is established, the Link-up ports change to green and the
POE port that is supplying power changes to blue. The dotted line between the FortiGate and FortiSwitch changes
to a solid line. The Connection status shows that FortiLink is up.
FortiOS 6.4.2 Administration Guide 1643
Fortinet Inc.
Switch Controller
Extend the security perimeter to the edge of FortiSwitch:
1. Configure the VLAN arrangement.
a. On the FortiGate, go to WiFi & Switch Controller > FortiSwitch VLANs.
b. Configure the VLAN interfaces that are applied on FortiSwitch.
On FortiGate, these switch VLAN interfaces are treated as layer-3 interfaces and are available to be applied by
firewall policy and other security controls in FortiOS. This means that security boundary is extended to
FortiSwitch.
2. Configure FortiSwitch ports.
a. On the FortiGate, go to WiFi & Switch Controller > FortiSwitch Ports.
b. Select one or more FortiSwitch ports and assign them to the switch VLAN.
c. You can also select POE/DHCP Snooping, STP, and other parameters for the FortiSwitch ports to show their
real-time status such as link status, data statistics, etc.
3. Configure access authentication.
a. On the FortiGate, go to WiFi & Switch Controller > FortiSwitch Security Policies.
b. Configure the 802.1X security policies.
c. Select Port-based or MAC-based mode and select User groups from the existing VDOM.
d. Configure other fields as necessary.
e. Go to WiFi & Switch Controller > FortiSwitch Ports.
f. Select one or more FortiSwitch ports, click + in the Security Policy column, then make a selection from the
pane.
Troubleshooting
Authorized FortiSwitch always offline
If an authorized FortiSwitch is always offline, go to the FortiGate CLI and use the command below to see all the
checkpoints. Inspect each checkpoint to find the cause of the problem.
execute switch-controller diagnose-connection S248EPTF18001384
Fortilink interface ... OK
aggr1 enabled
DHCP server ... OK
aggr1 enabled
NTP server ... OK
aggr1 enabled
NTP server sync ... OK
synchronized: yes, ntpsync: enabled, server-mode: enabled
ipv4 server(ntp1.fortiguard.com) 208.91.113.70 -- reachable(0x80) S:2 T:128
no data
ipv4 server(ntp2.fortiguard.com) 208.91.113.71 -- reachable(0x80) S:2 T:128
no data
ipv4 server(ntp2.fortiguard.com) 208.91.112.51 -- reachable(0xff) S:2 T:66 selected
server-version=4, stratum=2
reference time is dfe3aec5.744404e6 -- UTC Sat Jan 12 00:09:41 2019
clock offset is -0.320411 sec, root delay is 0.054535 sec
root dispersion is 0.533081 sec, peer dispersion is 11495 msec
FortiOS 6.4.2 Administration Guide 1644
Fortinet Inc.
Switch Controller
ipv4 server(ntp1.fortiguard.com) 208.91.112.50 -- reachable(0xff) S:2 T:66
server-version=4, stratum=2
reference time is dfe3aec5.744404e6 -- UTC Sat Jan 12 00:09:41 2019
clock offset is -0.448087 sec, root delay is 0.054535 sec
root dispersion is 0.533081 sec, peer dispersion is 12542 msec
HA mode ... disabled
Fortilink
Status ... SWITCH_AUTHORIZED_READY
Last keepalive ... 1 seconds ago
CAPWAP
Remote Address: 2.2.2.2
Status ... CONNECTED
Last keepalive ... 26 seconds ago
PING 2.2.2.2 (2.2.2.2): 56 data bytes
64 bytes from 2.2.2.2: icmp_seq=0 ttl=64 time=1.1 ms
64 bytes from 2.2.2.2: icmp_seq=1 ttl=64 time=13.9 ms
64 bytes from 2.2.2.2: icmp_seq=2 ttl=64 time=12.7 ms
64 bytes from 2.2.2.2: icmp_seq=3 ttl=64 time=2.9 ms
64 bytes from 2.2.2.2: icmp_seq=4 ttl=64 time=1.2 ms
--- 2.2.2.2 ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 1.1/6.3/13.9 ms
HA sync fails
If HA sync fails, use the command below to diagnose and locate the cause.
# diagnose sys ha checksum cluster
================== FG5H0E39179XXX9 ==================
is_manage_primary()=1, is_root_primary()=1
debugzone
global: 2b e9 81 38 c2 9d 4f db b7 0e 1f 49 42 c6 1e fb
vdom5: 3d dc e7 70 69 22 c3 12 a7 ac 68 06 21 21 ef 8f
vdom3: 89 59 1f 45 7a 75 ae fc 71 bc 42 f4 5e c2 47 c8
vdom2: b2 a5 f3 e7 85 02 62 e5 2a 23 23 64 04 66 76 cc
vdom1: 1f b5 11 61 31 c4 0c 72 2e 97 8d d8 45 7e d6 0c
root: af a6 48 c5 c2 9a 8b 81 a5 53 fb 27 e9 ae 01 6a
all: 89 1f 63 77 48 8a 30 ee 57 06 ca eb 71 e6 8e ad
checksum
global: 2b e9 81 38 c2 9d 4f db b7 0e 1f 49 42 c6 1e fb
vdom5: 3d dc e7 70 69 22 c3 12 a7 ac 68 06 21 21 ef 8f
vdom3: 89 59 1f 45 7a 75 ae fc 71 bc 42 f4 5e c2 47 c8
vdom2: b2 a5 f3 e7 85 02 62 e5 2a 23 23 64 04 66 76 cc
vdom1: 1f b5 11 61 31 c4 0c 72 2e 97 8d d8 45 7e d6 0c
root: af a6 48 c5 c2 9a 8b 81 a5 53 fb 27 e9 ae 01 6a
all: 89 1f 63 77 48 8a 30 ee 57 06 ca eb 71 e6 8e ad
FortiOS 6.4.2 Administration Guide 1645
Fortinet Inc.
Switch Controller
================== FG5H0E391790XXX4 ==================
is_manage_primary()=0, is_root_primary()=0
debugzone
global: 2b e9 81 38 c2 9d 4f db b7 0e 1f 49 42 c6 1e fb
vdom5: 3d dc e7 70 69 22 c3 12 a7 ac 68 06 21 21 ef 8f
vdom3: 89 59 1f 45 7a 75 ae fc 71 bc 42 f4 5e c2 47 c8
vdom2: b2 a5 f3 e7 85 02 62 e5 2a 23 23 64 04 66 76 cc
vdom1: 1f b5 11 61 31 c4 0c 72 2e 97 8d d8 45 7e d6 0c
root: af a6 48 c5 c2 9a 8b 81 a5 53 fb 27 e9 ae 01 6a
all: 89 1f 63 77 48 8a 30 ee 57 06 ca eb 71 e6 8e ad
checksum
global: 2b e9 81 38 c2 9d 4f db b7 0e 1f 49 42 c6 1e fb
vdom5: 3d dc e7 70 69 22 c3 12 a7 ac 68 06 21 21 ef 8f
vdom3: 89 59 1f 45 7a 75 ae fc 71 bc 42 f4 5e c2 47 c8
vdom2: b2 a5 f3 e7 85 02 62 e5 2a 23 23 64 04 66 76 cc
vdom1: 1f b5 11 61 31 c4 0c 72 2e 97 8d d8 45 7e d6 0c
root: af a6 48 c5 c2 9a 8b 81 a5 53 fb 27 e9 ae 01 6a
all: 89 1f 63 77 48 8a 30 ee 57 06 ca eb 71 e6 8e ad
Multiple FortiSwitches in tiers via aggregate interface with MCLAG enabled only on
distribution
This example provides a recommended configuration of FortiLink where multi-tier FortiSwitches are managed by an A-P
mode HA cluster of FortiGates as switch controller via aggregate interface, where FortiGates provide active-active links
to two distribution FortiSwitches connected to each other by MCLAG.
Prerequisites:
l The FortiGate model supports an aggregate interface.
l FortiSwitch units have been upgraded to latest released software version.
l Layer-3 path/route in the management VDOM is available to Internet so that the FortiSwitch units can synchronize
NTP.
l For the FortiSwitch D series, the models above 4 just support MCLAG. For the FortiSwitch E series, the models
above 2 just support MCLAG.
FortiOS 6.4.2 Administration Guide 1646
Fortinet Inc.
Switch Controller
To change the FortiSwitch management mode to FortiLink:
Enter the following CLI commands on the FortiSwitch:
config system global
set switch-mgmt-mode fortilink
end
This operation will cleanup all of the configuration and reboot the system!
Do you want to continue? (y/n)y
Backing up local mode config before entering FortiLink mode....
If the FortiSwitch ports used for the FortiLink connection have auto-discovery-fortilink enabled, executing
authorization on FortiGate will trigger the transformation to FortiLink mode automatically.
config switch interface
edit "port1"
set auto-discovery-fortilink enable
……
next
end
To set up an A-P mode HA cluster:
See HA active-passive cluster setup on page 768.
To create an aggregate interface and designate it as FortiLink interface on the FortiGate:
Using the CLI:
config system interface
edit "aggr1"
set vdom "vdom1"
FortiOS 6.4.2 Administration Guide 1647
Fortinet Inc.
Switch Controller
set fortilink enable
set type aggregate
set member "port11" "port12"
set fortilink-split-interface disable
next
end
fortilink-split-interface must be disabled for MCLAG to work.
Using the GUI:
1. Go to WiFi & Switch Controller > FortiLink Interface.
2. In Interface members, select one or more physical ports that are connected to different distribution FortiSwitches to
create an aggregate interface.
3. Disable FortiLink split interface.
4. Configure other fields as necessary.
5. Click OK.
To discover and authorize the FortiSwitch:
Using the CLI:
config switch-controller managed-switch
edit "FSWSerialNum"
set fsw-wan1-admin enable
……
next
end
Check the CLI output for Connection: Connected to show that FortiLink is up:
execute switch-controller get-conn-status FSWSerialNum
Get managed-switch S248EPTF18001384 connection status:
Admin Status: Authorized
Connection: Connected
Image Version: S248EP-v6.2.0-build143,190107 (Interim)
Remote Address: 2.2.2.2
Join Time: Fri Jan 11 15:22:32 2019
interface status duplex speed fortilink stacking poe status
port1 up full 1000Mbps no no Delivering Power
port2 down N/A 0 no no Searching
……
Using the GUI:
1. Go to WiFi & Switch Controller > Managed FortiSwitch.
2. Click Authorize and wait for a few minutes for the connection to be established.
When FortiLink between the FortiGate and FortiSwitch is established, the Link-up ports change to green and the
POE port that is supplying power changes to blue. The dotted line between the FortiGate and FortiSwitch changes
to a solid line. The Connection status shows that FortiLink is up.
To enable MCLAG on the ICL link between the distribution FortiSwitch devices:
conf switch trunk
edit "4DN4K15000008-0"
FortiOS 6.4.2 Administration Guide 1648
Fortinet Inc.
Switch Controller
set mclag-icl enable
next
end
When you enable mclag-icl, MCLAG on the FortiLink interface is enabled automatically and active-active backup
links between the distribution FortiSwitches are established.
To extend the security perimeter to the edge of FortiSwitch:
1. Configure the VLAN arrangement:
a. On the FortiGate, go to WiFi & Switch Controller > FortiSwitch VLANs.
b. Configure the VLAN interfaces that are applied on FortiSwitch.
On FortiGate, these switch VLAN interfaces are treated as layer-3 interfaces and are available to be applied by
firewall policy and other security controls in FortiOS. This means that security boundary is extended to
FortiSwitch.
2. Configure FortiSwitch ports:
a. On the FortiGate, go to WiFi & Switch Controller > FortiSwitch Ports.
b. Select one or more FortiSwitch ports and assign them to the switch VLAN.
c. You can also select POE/DHCP Snooping, STP, and other parameters for the FortiSwitch ports to show their
real-time status such as link status, data statistics, etc.
3. Configure access authentication.
a. On the FortiGate, go to WiFi & Switch Controller > FortiSwitch Security Policies.
b. Configure the 802.1X security policies.
c. Select Port-based or MAC-based mode and select User groups from the existing VDOM.
d. Configure other fields as necessary.
e. Go to WiFi & Switch Controller > FortiSwitch Ports.
f. Select one or more FortiSwitch ports, click + in the Security Policy column, then make a selection from the
pane.
Troubleshooting
Authorized FortiSwitch always offline
If an authorized FortiSwitch is always offline, go to the FortiGate CLI and use the command below to see all the
checkpoints. Inspect each checkpoint to find the cause of the problem.
execute switch-controller diagnose-connection S248EPTF18001384
Fortilink interface ... OK
aggr1 enabled
DHCP server ... OK
aggr1 enabled
NTP server ... OK
aggr1 enabled
NTP server sync ... OK
synchronized: yes, ntpsync: enabled, server-mode: enabled
ipv4 server(ntp1.fortiguard.com) 208.91.113.70 -- reachable(0x80) S:2 T:128
no data
FortiOS 6.4.2 Administration Guide 1649
Fortinet Inc.
Switch Controller
ipv4 server(ntp2.fortiguard.com) 208.91.113.71 -- reachable(0x80) S:2 T:128
no data
ipv4 server(ntp2.fortiguard.com) 208.91.112.51 -- reachable(0xff) S:2 T:66 selected
server-version=4, stratum=2
reference time is dfe3aec5.744404e6 -- UTC Sat Jan 12 00:09:41 2019
clock offset is -0.320411 sec, root delay is 0.054535 sec
root dispersion is 0.533081 sec, peer dispersion is 11495 msec
ipv4 server(ntp1.fortiguard.com) 208.91.112.50 -- reachable(0xff) S:2 T:66
server-version=4, stratum=2
reference time is dfe3aec5.744404e6 -- UTC Sat Jan 12 00:09:41 2019
clock offset is -0.448087 sec, root delay is 0.054535 sec
root dispersion is 0.533081 sec, peer dispersion is 12542 msec
HA mode ... disabled
Fortilink
Status ... SWITCH_AUTHORIZED_READY
Last keepalive ... 1 seconds ago
CAPWAP
Remote Address: 2.2.2.2
Status ... CONNECTED
Last keepalive ... 26 seconds ago
PING 2.2.2.2 (2.2.2.2): 56 data bytes
64 bytes from 2.2.2.2: icmp_seq=0 ttl=64 time=1.1 ms
64 bytes from 2.2.2.2: icmp_seq=1 ttl=64 time=13.9 ms
64 bytes from 2.2.2.2: icmp_seq=2 ttl=64 time=12.7 ms
64 bytes from 2.2.2.2: icmp_seq=3 ttl=64 time=2.9 ms
64 bytes from 2.2.2.2: icmp_seq=4 ttl=64 time=1.2 ms
--- 2.2.2.2 ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 1.1/6.3/13.9 ms
HA sync fails
If HA sync fails, use the command below to diagnose and locate the cause.
# diagnose sys ha checksum cluster
Multiple FortiSwitches in tiers via aggregate interface with MCLAG enabled on all
tiers
This example provides a recommended configuration of FortiLink where multi-tier FortiSwitch devices are managed by
an A-P mode HA cluster of FortiGates acting as a switch controller via an aggregate interface. The FortiGates provide A-
A links to two distribution FortiSwitches that are connected to each other by MCLAG. All access FortiSwitch devices
have A-A links with two upper tier FortiSwitches, as long as the MCLAG-ICL has been enabled between the upper tiers.
FortiOS 6.4.2 Administration Guide 1650
Fortinet Inc.
Switch Controller
Prerequisites:
l The FortiGate model supports an aggregate interface.
l FortiSwitch units have been upgraded to latest released software version.
l Layer-3 path/route in the management VDOM is available to Internet so that the FortiSwitch units can synchronize
NTP.
l For the FortiSwitch D series, the models above 4 just support MCLAG. For the FortiSwitch E series, the models
above 2 just support MCLAG.
To change the FortiSwitch management mode to FortiLink:
Enter the following CLI commands on the FortiSwitch:
config system global
set switch-mgmt-mode fortilink
end
This operation will cleanup all of the configuration and reboot the system!
Do you want to continue? (y/n)y
Backing up local mode config before entering FortiLink mode....
If the FortiSwitch ports used for the FortiLink connection have auto-discovery-fortilink enabled, executing
authorization on FortiGate will trigger the transformation to FortiLink mode automatically.
config switch interface
edit "port1"
set auto-discovery-fortilink enable
……
next
end
FortiOS 6.4.2 Administration Guide 1651
Fortinet Inc.
Switch Controller
To set up an A-P mode HA cluster:
See HA active-passive cluster setup on page 768.
To create an aggregate interface and designate it as FortiLink interface on the FortiGate:
Using the CLI:
config system interface
edit "aggr1"
set vdom "vdom1"
set fortilink enable
set type aggregate
set member "port11" "port12"
set fortilink-split-interface disable
next
end
fortilink-split-interface must be disabled for MCLAG to work.
Using the GUI:
1. Go to WiFi & Switch Controller > FortiLink Interface.
2. In Interface members, select one or more physical ports that are connected to different distribution FortiSwitches to
create an aggregate interface.
3. Disable FortiLink split interface.
4. Configure other fields as necessary.
5. Click OK.
Discover and authorize the FortiSwitch:
Using the CLI:
config switch-controller managed-switch
edit "FSWSerialNum"
set fsw-wan1-admin enable
……
next
end
Check the CLI output for Connection: Connected to show that FortiLink is up:
execute switch-controller get-conn-status FSWSerialNum
Get managed-switch S248EPTF18001384 connection status:
Admin Status: Authorized
Connection: Connected
Image Version: S248EP-v6.2.0-build143,190107 (Interim)
Remote Address: 2.2.2.2
Join Time: Fri Jan 11 15:22:32 2019
interface status duplex speed fortilink stacking poe status
port1 up full 1000Mbps no no Delivering Power
port2 down N/A 0 no no Searching
……
Using the GUI:
FortiOS 6.4.2 Administration Guide 1652
Fortinet Inc.
Switch Controller
1. Go to WiFi & Switch Controller > Managed FortiSwitch.
2. Click Authorize and wait for a few minutes for the connection to be established.
When FortiLink between the FortiGate and FortiSwitch is established, the Link-up ports change to green and the
POE port that is supplying power changes to blue. The dotted line between the FortiGate and FortiSwitch changes
to a solid line. The Connection status shows that FortiLink is up.
Enable MCLAG on the ICL link between the distribution FortiSwitch devices:
conf switch trunk
edit "4DN4K15000008-0"
set mclag-icl enable
next
end
When you enable mclag-icl, MCLAG on the FortiLink interface is enabled automatically and active-active backup
links between the distribution FortiSwitches are established.
Extend the security perimeter to the edge of FortiSwitch:
1. Configure the VLAN arrangement.
a. On the FortiGate, go to WiFi & Switch Controller > FortiSwitch VLANs.
b. Configure the VLAN interfaces that are applied on FortiSwitch.
On FortiGate, these switch VLAN interfaces are treated as layer-3 interfaces and are available to be applied by
firewall policy and other security controls in FortiOS. This means that security boundary is extended to
FortiSwitch.
2. Configure FortiSwitch ports.
a. On the FortiGate, go to WiFi & Switch Controller > FortiSwitch Ports.
b. Select one or more FortiSwitch ports and assign them to the switch VLAN.
c. You can also select POE/DHCP Snooping, STP, and other parameters for the FortiSwitch ports to show their
real-time status such as link status, data statistics, etc.
3. Configure access authentication.
a. On the FortiGate, go to WiFi & Switch Controller > FortiSwitch Security Policies.
b. Configure the 802.1X security policies.
c. Select Port-based or MAC-based mode and select User groups from the existing VDOM.
d. Configure other fields as necessary.
e. Go to WiFi & Switch Controller > FortiSwitch Ports.
f. Select one or more FortiSwitch ports, click + in the Security Policy column, then make a selection from the
pane.
Troubleshooting
Authorized FortiSwitch always offline
If an authorized FortiSwitch is always offline, go to the FortiGate CLI and use the command below to see all the
checkpoints. Inspect each checkpoint to find the cause of the problem.
execute switch-controller diagnose-connection S248EPTF18001384
Fortilink interface ... OK
FortiOS 6.4.2 Administration Guide 1653
Fortinet Inc.
Switch Controller
aggr1 enabled
DHCP server ... OK
aggr1 enabled
NTP server ... OK
aggr1 enabled
NTP server sync ... OK
synchronized: yes, ntpsync: enabled, server-mode: enabled
ipv4 server(ntp1.fortiguard.com) 208.91.113.70 -- reachable(0x80) S:2 T:128
no data
ipv4 server(ntp2.fortiguard.com) 208.91.113.71 -- reachable(0x80) S:2 T:128
no data
ipv4 server(ntp2.fortiguard.com) 208.91.112.51 -- reachable(0xff) S:2 T:66 selected
server-version=4, stratum=2
reference time is dfe3aec5.744404e6 -- UTC Sat Jan 12 00:09:41 2019
clock offset is -0.320411 sec, root delay is 0.054535 sec
root dispersion is 0.533081 sec, peer dispersion is 11495 msec
ipv4 server(ntp1.fortiguard.com) 208.91.112.50 -- reachable(0xff) S:2 T:66
server-version=4, stratum=2
reference time is dfe3aec5.744404e6 -- UTC Sat Jan 12 00:09:41 2019
clock offset is -0.448087 sec, root delay is 0.054535 sec
root dispersion is 0.533081 sec, peer dispersion is 12542 msec
HA mode ... disabled
Fortilink
Status ... SWITCH_AUTHORIZED_READY
Last keepalive ... 1 seconds ago
CAPWAP
Remote Address: 2.2.2.2
Status ... CONNECTED
Last keepalive ... 26 seconds ago
PING 2.2.2.2 (2.2.2.2): 56 data bytes
64 bytes from 2.2.2.2: icmp_seq=0 ttl=64 time=1.1 ms
64 bytes from 2.2.2.2: icmp_seq=1 ttl=64 time=13.9 ms
64 bytes from 2.2.2.2: icmp_seq=2 ttl=64 time=12.7 ms
64 bytes from 2.2.2.2: icmp_seq=3 ttl=64 time=2.9 ms
64 bytes from 2.2.2.2: icmp_seq=4 ttl=64 time=1.2 ms
--- 2.2.2.2 ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 1.1/6.3/13.9 ms
HA sync fails
If HA sync fails, use the command below to diagnose and locate the cause.
# diagnose sys ha checksum cluster
FortiOS 6.4.2 Administration Guide 1654
Fortinet Inc.
Switch Controller
Authentication and security
The following topics provide instructions on configuring switch related authentication and security:
l MAC-based 802.1X authentication on page 1655
l Port-based 802.1X authentication on page 1658
l MAC layer control - Sticky MAC and MAC Learning-limit on page 1661
l Quarantine on page 1662
l Inter-operability with per instance RSTP 802.1w on page 1667
MAC-based 802.1X authentication
This example show how to configure MAC-based 802.1X authentication to managed FortiSwitch ports when using
FortiLink. Managed FortiSwitch devices will authenticate and record the MAC addresses of user devices. If there is a hub
after the FortiSwitch that connects multiple user devices, each device can access the network after passing
authentication.
Prerequisites:
l The certificates and authentication protocol supported by the supplicant software and RADIUS server are
compatible.
l The managed FortiSwitches using FortiLink act as authenticators.
To create a firewall policy to allow the RADIUS authentication-related traffic from the FortiLink interface
to the outbound interface on the FortiGate:
config firewall policy
edit 0
set srcintf "fortilink-interface"
set dstintf "outbound-interface-to-RadiusSVR"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "RADIUS"
set nat enable
next
end
Designate a RADIUS server and create a user group:
Using the CLI:
FortiOS 6.4.2 Administration Guide 1655
Fortinet Inc.
Switch Controller
config user radius
edit "Radius1"
set server "172.18.60.203"
set secret ENC 1dddddd
next
end
config user group
edit "Radius-Grp1"
set member "Radius1"
next
end
Using the GUI:
1. On the FortiGate, go to User & Authentication > RADIUS Servers.
2. Edit an existing server, or create a new one.
3. If necessary, add a Name for the server.
4. Set the IP/Name to 172.18.60.203 and Secret to 1dddddd .
5. Configure other fields as necessary.
6. Click OK.
7. Go to User & Authentication > User Groups.
8. Create a new group, and add the RADIUS server to the Remote Groups list.
9. Click OK.
Use the new user group in a security policy:
Using the CLI:
config switch-controller security-policy 802-1X
edit "802-1X-policy-default"
set security-mode 802.1X-mac-based
set user-group "Radius-Grp1"
set mac-auth-bypass disable
set open-auth disable
set eap-passthru enable
set guest-vlan disable
set auth-fail-vlan disable
set framevid-apply enable
set radius-timeout-overwrite disable
next
end
Configure the guest VLAN, authentication fail VLAN, and other parameters as needed.
FortiOS 6.4.2 Administration Guide 1656
Fortinet Inc.
Switch Controller
Using the GUI:
1. Go to WiFi & Switch Controller > FortiSwitch Security Policies
2. Use the default 802-1X-policy-default, or create a new security policy.
3. Use the RADIUS server group in the policy.
4. Set the Security mode to MAC-based.
5. Configure other fields as necessary.
6. Click OK.
Apply the security policy to the ports of the managed FortiSwitches:
Using the CLI:
config switch-controller managed-switch
edit S248EPTF1800XXXX
config ports
edit "port6"
set port-security-policy "802-1X-policy-default"
next
end
next
end
On the FortiSwitch, check the configuration:
config switch interface
edit "port6"
set allowed-vlans 4093
set untagged-vlans 4093
set security-groups "Radius-Grp1"
set snmp-index 6
config port-security
set auth-fail-vlan disable
set eap-passthru enable
set framevid-apply enable
set guest-auth-delay 30
set guest-vlan disable
set mac-auth-bypass disable
set open-auth disable
set port-security-mode 802.1X-mac-based
set radius-timeout-overwrite disable
set auth-fail-vlanid 200
set guest-vlanid 100
end
next
end
Using the GUI:
1. On the FortiGate, go to WiFi & Switch Controller > FortiSwitch VLANs.
2. Configure the VLAN interfaces that are applied on FortiSwitch.
On FortiGate, these switch VLAN interfaces are treated as layer-3 interfaces and are available to be applied by
firewall policy and other security controls in FortiOS. This means that security boundary is extended to FortiSwitch.
FortiOS 6.4.2 Administration Guide 1657
Fortinet Inc.
Switch Controller
Execute 802.1X authentication on a user device:
On Linux, run wpa_supplicant:
wpa_supplicant -c /etc/wpa_supplicant/local_supplicant.conf -D wired -i eth2 -dd
On the FortiGate, view the status of the 802.1X authentication:
diagnose switch-controller switch-info 802.1X
Managed Switch : S248EPTF1800XXXX
port6 : Mode: mac-based (mac-by-pass disable) -----> MAC-based
Link: Link up
Port State: authorized: ( ) -----> Showing authorized means
auth passed. Otherwise, shown failed
EAP pass-through mode : Enable
Native Vlan : 1
Allowed Vlan list: 1,4093
Untagged Vlan list: 1,4093
Guest VLAN :
Auth-Fail Vlan :
Switch sessions 1/240, Local port sessions:1/20
Client MAC Type Vlan Dynamic-Vlan
00:0c:29:d4:4f:3c 802.1x 1 0 -----> User device of
auth passed can access the network. Its MAC address is recored, while other User Devices
under same FSW ports still not allowed to access.
Sessions info:
00:0c:29:d4:4f:3c Type=802.1x,MD5,state=AUTHENTICATED,etime=6,eap_cnt=3
params:reAuth=3600
Port-based 802.1X authentication
This example show how to configure Port-based 802.1X authentication to managed FortiSwitch ports when using
FortiLink. Managed FortiSwitch devices will authenticate user devices per each FortiSwitch port. If there is a hub after
the FortiSwitch that connects multiple user devices to the same port, they can all access the network after
authentication, which is not recommended from a security perspective.
Prerequisites:
l The certificates and authentication protocol supported by the supplicant software and RADIUS server are
compatible.
l The managed FortiSwitches using FortiLink act as authenticators.
FortiOS 6.4.2 Administration Guide 1658
Fortinet Inc.
Switch Controller
To create a firewall policy to allow the RADIUS authentication-related traffic from the FortiLink interface
to the outbound interface on the FortiGate:
config firewall policy
edit 0
set srcintf "fortilink-interface"
set dstintf "outbound-interface-to-RadiusSVR"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "RADIUS"
set nat enable
next
end
Designate a RADIUS server and create a user group:
Using the CLI:
config user radius
edit "Radius1"
set server "172.18.60.203"
set secret ENC 1dddddd
next
end
config user group
edit "Radius-Grp1"
set member "Radius1"
next
end
Using the GUI:
1. On the FortiGate, go to User & Authentication > RADIUS Servers.
2. Edit an existing server, or create a new one.
3. If necessary, add a Name for the server.
4. Set the IP/Name to 172.18.60.203 and Secret to 1dddddd .
5. Configure other fields as necessary.
6. Click OK.
7. Go to User & Authentication > User Groups.
8. Create a new group, and add the RADIUS server to the Remote Groups list.
FortiOS 6.4.2 Administration Guide 1659
Fortinet Inc.
Switch Controller
9. Click OK.
Use the new user group in a security policy:
Using the CLI:
config switch-controller security-policy 802-1X
edit "802-1X-policy-default"
set security-mode 802.1X
set user-group "Radius-Grp1"
set mac-auth-bypass disable
set open-auth disable
set eap-passthru enable
set guest-vlan disable
set auth-fail-vlan disable
set framevid-apply enable
set radius-timeout-overwrite disable
next
end
Configure the guest VLAN, authentication fail VLAN, and other parameters as needed.
Using the GUI:
1. Go to WiFi & Switch Controller > FortiSwitch Security Policies
2. Use the default 802-1X-policy-default, or create a new security policy.
3. Use the RADIUS server group in the policy.
4. Set the Security mode to Port-based.
5. Configure other fields as necessary.
6. Click OK.
Apply the security policy to the ports of the managed FortiSwitches:
Using the CLI:
config switch-controller managed-switch
edit S248EPTF1800XXXX
config ports
edit "port6"
set port-security-policy "802-1X-policy-default"
next
end
next
end
Using the GUI:
1. On the FortiGate, go to WiFi & Switch Controller > FortiSwitch VLANs.
2. Configure the VLAN interfaces that are applied on FortiSwitch.
On FortiGate, these switch VLAN interfaces are treated as layer-3 interfaces and are available to be applied by
firewall policy and other security controls in FortiOS. This means that security boundary is extended to FortiSwitch.
Execute 802.1X authentication on a user device:
On Linux, run wpa_supplicant:
wpa_supplicant -c /etc/wpa_supplicant/local_supplicant.conf -D wired -i eth2 -dd
FortiOS 6.4.2 Administration Guide 1660
Fortinet Inc.
Switch Controller
On the FortiGate, view the status of the 802.1X authentication:
diagnose switch-controller switch-info 802.1X Managed Switch : S248EPTF18001384
port6 : Mode: port-based (mac-by-pass disable)
Link: Link up
Port State: authorized: ( )
Dynamic Authorized Vlan : 0
EAP pass-through mode : Enable
Native Vlan : 1
Allowed Vlan list: 1,4093
Untagged Vlan list: 4093
Guest VLAN :
Auth-Fail Vlan :
Sessions info:
00:0c:29:d4:4f:3c Type=802.1x,MD5,state=AUTHENTICATED,etime=0,eap_cnt=6
params:reAuth=3600
MAC layer control - Sticky MAC and MAC Learning-limit
Persistent MAC learning, or Sticky MAC, is a port security feature that lets an interface retain dynamically learned MAC
addresses when a switch is restarted, or an interface goes down and then is brought back online.
Enabling Sticky MAC along with MAC Learning-limit restricts the number of MAC addresses that are learned. This
prevents layer 2 Denial of Service (DoS) attacks, overflow attacks on the Ethernet switching table, and DHCP starvation
attacks by limiting the number of MAC addresses that are allowed while still allowing the interface to learn a specified
number of MAC addresses. The interface is secured because, after the specified limit has been reached, additional
devices cannot connect to the port. Interfaces can be allowed to learn the MAC address of trusted workstations and
servers from the time that the interfaces are connected to the network, until the MAC address limit is reached.
Prerequisites
l Sticky MAC save is hardware and CPU intensive if there are too many entries.
l Dual chip device models (X48 and XX48 FortiSwitch models) do not support MAC Learning-limit on VLANs, but still
support it on FortiSwitch ports.
Enable Sticky MAC on the FortiSwitch ports view:
config switch-controller managed-switch
edit S248EPTF18001384
config ports
edit port6
set sticky-mac enable
next
end
next
end
FortiOS 6.4.2 Administration Guide 1661
Fortinet Inc.
Switch Controller
Check the MAC-table on the FortiSwitch to see that the status of related MAC items on the Sticky MAC enabled
ports has changed from dynamic to static:
Before Sticky-MAC is enabled:
diagnose switch mac-address list
MAC: 08:5b:0e:06:6a:d4 VLAN: 1 Port: port1(port-id 1) Flags: 0x00030440 [ hit
dynamic src-hit native move ]
After Sticky-MAC is enabled:
diagnose switch mac-address list
MAC: 00:0c:29:d4:4f:3c VLAN: 1 Port: port6(port-id 6) Flags: 0x00000020 [ static ]
Save Sticky-MAC items into the database and delete others:
Saving Sticky-MAC items from the running memory into the database, and deleting unsaved items, will ensure that, even
after the FortiSwitch is rebooted, the trusted MAC addresses will be kept and will not need to be relearned.
execute switch-controller switch-action sticky-mac save all S248EPTF1800XXXX
S248EPTF1800XXXX: Save started...
Warning: Please wait save will take longer time upto 30 seconds...
Collecting config data....Done
Collecting hardware data....Done
Saving....Done
Sticky MAC entries saved = 1 ----------------> Number of saved Sticky MAC items is
shown
execute switch-controller switch-action sticky-mac delete-unsaved all S248EPTF1800XXXX
Configure the MAC Learning-limit under the VLAN or managed FortiSwitch ports view:
VLAN view:
config system interface
edit vsw.aggr1
set switch-controller-learning-limit 10
next
end
Ports view:
config switch-controller managed-switch
edit S248EPTF1800XXXX
config ports
edit port6
set learning-limit 11
next
end
next
end
Quarantine
There are two quarantine modes available: by redirect or by VLAN. The quarantine mode is configured in the CLI.
FortiOS 6.4.2 Administration Guide 1662
Fortinet Inc.
Switch Controller
To configure the quarantine mode:
config switch-controller global
set quarantine-mode {by-vlan (default)| by-redirect }
end
Quarantine by redirect
Quarantine by redirect makes the FortiSwitch redirect traffic from the quarantined host to the FortiGate, keeping the
device on its original network.
Quarantine by VLAN, which moves the device from the normal switch VLAN to the quarantine VLAN, can be complicated
for administrators that use DHCP or static IP address assignments. When a device is sent to quarantine, its IP address is
no longer valid for the quarantined VLAN segment, making it difficult to perform remediation on the device. This is the
default quarantine mode.
In this example, the PC can access the internet when there is an allowed policy from interface vsw.port11 to port1 (called
PC to Internet). When the PC is quarantined, a firewall address is automatically created for the PC, which is added to an
automatically created address group called QuarantinedDevices. A policy (called quarantine) is created that applies to
this address group and blocks traffic from the PC to the internet.
The FortiSwitch configuration is done automatically after the FortiGate configured.
To quarantine an active device, based on the device's MAC address, in the CLI:
config user quarantine
set traffic-policy quarantine
set firewall-groups "QuarantinedDevices"
config targets
edit "manual-qtn-1"
set description "Manually quarantined"
config macs
edit 00:0c:29:d4:4f:3c
set description "manual-qtn"
set drop disable
next
end
next
end
end
Firewall addresses are automatically created for the quarantined MAC address, and the addresses are added to the
QuarantinedDevices address group:
# show firewall address | grep -f qtn
config firewall address
edit "qtn.mac_00:00:00:00:00:00" <---
set uuid 9069e73c-3c6e-51ea-28d4-b807167fdcb7
FortiOS 6.4.2 Administration Guide 1663
Fortinet Inc.
Switch Controller
set type mac
set comment "Quarantine dummy MAC to keep the addrgrp"
next
edit "qtn.mac_00:0c:29:d4:4f:3c" <---
set uuid 869847ce-3c84-51ea-59c2-964152415e22
set type mac
set start-mac 00:0c:29:d4:4f:3c
set end-mac 00:0c:29:d4:4f:3c
set comment "Quarantine MAC"
next
end
# show firewall addrgrp | grep -f Quarantined
config firewall addrgrp
edit "QuarantinedDevices" <---
set uuid 9069d332-3c6e-51ea-17e1-cab3dd4dde6c
set member "qtn.mac_00:00:00:00:00:00" "qtn.mac_00:0c:29:d4:4f:3c"
next
end
To view the automatic configuration changes on the FortiSwitch:
config switch quarantine
edit 00:0c:29:d4:4f:3c
set acl-id 2
set cos-queue 0
set description "manual-qtn "
set policer 1
next
end
config switch acl ingress
edit 2
config action
set cos-queue 0
set count enable
set policer 1
end
config classifier
set src-mac 00:0c:29:d4:4f:3c
end
set ingress-interface-all enable
next
end
FortiOS 6.4.2 Administration Guide 1664
Fortinet Inc.
Switch Controller
To quarantine an active device, based on the device's MAC address, in the GUI:
1. Go to Security Fabric > Physical Topology or Security Fabric > Logical Topology.
2. Mouse over the bubble of an active device, and select Quarantine Host from the right-click menu.
3. Click OK in the Quarantine Host page to quarantine the device.
Firewall addresses and an address group (QuarantinedDeivces) are automatically added for the quarantined
devices.
4. Go to Policy & Objects > Firewall Policy and create a policy to block traffic from quarantined devices to the internet.
Quarantine by VLAN
When the FortiGate detects devices that have lower trust scores, lack mandatory installed software, or are sending out
malicious traffic, an administrator can quarantine the device from the normal switch VLAN to the quarantine VLAN. This
can limit the device's access, or provide them specific information on the quarantine portal page.
FortiOS 6.4.2 Administration Guide 1665
Fortinet Inc.
Switch Controller
To quarantine an active device, based on the device's MAC address, in the CLI:
config user quarantine
config targets
edit "manual-qtn-1"
set description "Manually quarantined"
config macs
edit 00:0c:29:d4:4f:3c
set description "manual-qtn "
next
end
next
end
end
To quarantine an active device, based on the device's MAC address, in the GUI:
1. Go to Security Fabric > Physical Topology, or Security Fabric > Logical Topology.
2. Mouse over the bubble of an active device, and select Quarantine Host from the right-click menu.
3. Click OK in the Quarantine Host page to quarantine the device.
The quarantined device is moved to the quarantine VLAN, and the configuration of the FortiSwitch port does not change.
The quarantined device gets its IP address from the DHCP server on the quarantine VLAN interface. The network
locations that the device can access depends on the firewall policies that are configured for the quarantine VLAN
interface. By default, the device must acknowledge and accept the information on the Quarantine Portal before it can
access any part of the network.
Releasing or clearing the quarantine targets
To release or clear quarantine targets in the CLI:
config user quarantine
config targets
delete "manual-qtn-1"
...
end
end
config user quarantine
config targets
purge
end
end
FortiOS 6.4.2 Administration Guide 1666
Fortinet Inc.
Switch Controller
To release or clear quarantine targets in the GUI:
1. Go to Dashboard> Status and click Add Widget.
2. In the Monitor section, click Quarantine.
3. Select the FortiGate from the dropdown box.
4. Click Add Widget. The Quarantine widget appears in the dashboard.
5. In the Quarantine widget, delete the quarantine targets as needed, or click Remove All to delete all the targets.
To create a new dashboard for quarantined targets, see Dashboards and widgets on page 63.
To create a standalone Quarantine widget, see Using widgets on page 68.
Inter-operability with per instance RSTP 802.1w
Inter-operability with rapid Per-VLAN Spanning Tree plus (PVST+) can be enabled per port on managed FortiSwitch
devices. It is disabled by default.
To enable rapid PVST+ on port3 of a managed FortiSwitch:
config switch-controller managed-switch
edit "S524D00000000000"
config ports
edit "port3"
set rpvst-port enable
next
end
next
end
Flow and device detection
The following topics provide information on flow and device detection:
l Data statistic on page 1667
l Security Fabric showing on page 1669
l NAC policies on switch ports on page 1669
l EMS tags in NAC policies on page 1673
l Use FortiSwitch to query FortiGuard IoT service for device details on page 1675
l Voice device detection on page 1676
Data statistic
This example shows a FortiLink scenario where the FortiGate acts as the switch controller that collects the data statistics
of managed FortiSwitch ports. This is counted by each FortiSwitch and concentrated in the controller.
FortiOS 6.4.2 Administration Guide 1667
Fortinet Inc.
Switch Controller
Sample topology
To show data statistics using the GUI:
1. Go to WiFi & Switch Controller > FortiSwitch Ports.
2. Select Configure Table.
3. Select Bytes, Errors and Packets to make them visible.
The related data statistic of each managed FortiSwitch port is shown.
To show data statistics using the CLI:
# diagnose switch-controller switch-info port-stats S248EPTF180XXXX
......
Port(port50) is Admin up, line protocol is down
Interface Type is Gigabit Media Independent Interface(GMII)
Address is 70:4C:A5:E0:F3:8D, loopback is not set
MTU 9216 bytes, Encapsulation IEEE 802.3/Ethernet-II
full-duplex, 1000 Mb/s, link type is manual
input : 0 bytes, 0 packets, 0 errors, 0 drops, 0 oversizes
0 unicasts, 0 multicasts, 0 broadcasts, 0 unknowns
output : 0 bytes, 0 packets, 0 errors, 0 drops, 0 oversizes
0 unicasts, 0 multicasts, 0 broadcasts
0 fragments, 0 undersizes, 0 collisions, 0 jabbers
......
FortiOS 6.4.2 Administration Guide 1668
Fortinet Inc.
Switch Controller
Security Fabric showing
This example shows one of the key components in the concept of Security Fabric: FortiSwitches in FortiLink. In the
FortiGate GUI, you can see the whole picture of the Security Fabric working for your network security.
Sample topology
To show Security Fabric information:
1. Go to Security Fabric > Physical Topology.
2. To see the connection between FortiGates and managed FortiSwitches, hover the pointer over the icons to see
information about each network element.
NAC policies on switch ports
Network access control (NAC) helps administrators implement policies to control the devices and users that have access
to their networks. A NAC policy can use user or detected device information, such as device type or OS, to put traffic into
a specific VLAN or apply specific port settings.
The NAC function can be enabled on all FortiSwitches, or on specific FortiSwitch ports.
FortiOS 6.4.2 Administration Guide 1669
Fortinet Inc.
Switch Controller
Initially, devices connected to ports with the NAC function enabled are put into an onboarding VLAN. The onboarding
VLAN usually has a restrictive security policy, device identification enabled, a DHCP server, and captive portal enabled.
The device identification feature collects device information. When the device matches the patterns that are defined in a
NAC policy, an action is applied to the device, such as moving it to a specific VLAN or having a security policy applied.
The list of managed FortiSwitches that a NAC policy can be applied on can contain a reference
to a managed FortiSwitch device. When this reference is set by an administrator, it must be
removed before the managed switch can be deleted.
To remove a switch from the list:
config user nac-policy
edit <name>
unselect switch-scope <switch>
next
end
Example
In this example, NAC settings are enabled and configured so that a Linux PC is automatically moved into a VLAN
dedicated to Linux PCs after it comes online and gets identified.
To configure a NAC policy on a switch in the GUI:
1. Use the wizard to enable the NAC feature and configure basic settings:
a. Go to WiFi & Switch Controller > FortiSwitch NAC Policies. If FortiSwitch options are not visible, see Feature
visibility for instructions on making them visible.
b. Click Configure NAC Settings in the message box.
c. Specify the switch ports that NAC access mode will be enabled on, or enable it on all of them.
d. Select the onboarding VLAN. If no VLAN exists, click Create in the drop down menu to create a new NAC
VLAN interface.
FortiOS 6.4.2 Administration Guide 1670
Fortinet Inc.
Switch Controller
e. Click Next.
f. Create or modify NAC VLANs (also known as FortiSwitch VLANs) that can be used in NAC policies.
g. Create or edit NAC VLANs as needed. See FortiLink setup on page 1606 for details.
h. Click Submit.
The NAC settings can be edited in WiFi & Switch Controller > FortiLink Interface.
The NAC VLANs can be edited in WiFi & Switch Controller > FortiSwitch VLANs.
The access mode of the switch ports is changed to NAC and the native VLAN is set to the onboarding VLAN.
2. Create a NAC VLAN for all Linux PCs:
a. Go to WiFi & Switch Controller > FortiSwitch VLANs and click Create New.
b. Set Name to vlan_Linux.
c. Configure the remaining settings as required.
d. Click OK.
3. Create a NAC policy to match all Linux PCs and assign them to the specific VLAN:
a. Go to WiFi & Switch Controller > FortiSwitch NAC Policies and click Create New.
b. Enter a name for the policy, such as Linux_to_VLAN.
c. Enable Operating system and enter Linux* in the field.
FortiOS 6.4.2 Administration Guide 1671
Fortinet Inc.
Switch Controller
d. Select the Assign VLAN card and set VLAN to vlan_Linux.
e. Click OK.
4. After the Linux PC connects, check that it is matched to the policy:
a. Go to WiFi & Switch Controller > FortiSwitch NAC Policies.
b. Select the Linux_to_VLAN policy and click View Matched Devices.
The Matched Devices pane opens, showing the devices that matched the policy.
c. Go to WiFi & Switch Controller > FortiSwitch Ports.
The port that the Linux PC is connected to will include vlan_Linux in the Allowed VLANs column.
To configure a NAC policy on a switch in the CLI:
1. Configure the FortiLink interface:
config system interface
edit "fortilink"
set vdom "root"
set fortilink enable
set ip 169.254.1.1 255.255.255.0
set allowaccess ping fabric
set type aggregate
set member "internal11"
set lldp-reception enable
set lldp-transmission enable
FortiOS 6.4.2 Administration Guide 1672
Fortinet Inc.
Switch Controller
set snmp-index 8
set auto-auth-extension-device enable
set switch-controller-nac "fortilink"
next
end
2. Configure the integrated NAC settings:
config switch-controller nac-settings
edit "fortilink"
set mode global
set onboarding-vlan "onboarding"
next
end
3. Configure the NAC policy matching pattern to identify matching NAC devices:
config user nac-policy
edit "Linux_to_VLAN"
set os "Linux*"
set switch-fortilink "fortilink"
set switch-mac-policy "Linux_to_VLAN"
next
end
4. Configure the MAC policy to be applied on the managed FortiSwitch devices through the NAC device:
config switch-controller mac-policy
edit "Linux_to_VLAN"
set fortilink "fortilink"
set vlan "vlan_Linux"
next
end
5. View the NAC devices learned on the managed FortiSwitch ports that match the NAC policy:
show switch-controller nac-device
config switch-controller nac-device
edit 1
set description "auto detected @ 2020-04-01 15:36:24"
set mac 00:0c:29:a9:12:74
set last-known-switch "S124EP5918000276"
set last-known-port "port6"
set matched-nac-policy "Linux_to_VLAN"
set mac-policy "Linux_to_VLAN"
next
end
EMS tags in NAC policies
The EMS server generates a dynamic address with a MAC address. A MAC-based EMS tag can be used as a matching
condition in a switch controller NAC policy. The EMS server must be running version 6.4.1 or later.
The following example uses synchronized FortiClient EMS tags from the EMS server. For more information, see
Synchronizing FortiClient EMS tags and configurations on page 155.
FortiOS 6.4.2 Administration Guide 1673
Fortinet Inc.
Switch Controller
To use an EMS tag in a NAC policy in the GUI:
1. Go to WiFi & Switch Controller > FortiSwitch NAC Policies and click Create New.
2. Enter a policy name.
3. For Category, select EMS Tag.
4. In the FortiClient EMS Tag dropdown, select a MAC-based tag.
5. Configure the other settings as needed.
6. Click OK.
To use an EMS tag in a NAC policy in the CLI:
1. Configure the firewall address:
config firewall address
edit "MAC_FCTEMS0000100000_ems134_vulner_critical_tag"
set type dynamic
set sub-type ems-tag
set comment ''
set associated-interface ''
set color 0
set obj-type mac
next
end
2. Configure the NAC policy:
config user nac-policy
edit "nac01"
set description ''
set category ems-tag
set status enable
set ems-tag "MAC_FCTEMS0000100000_ems134_win10_tag"
set switch-fortilink "FortiLink01"
set switch-auto-auth global
set switch-port-policy ''
set switch-mac-policy "nac01"
next
end
FortiOS 6.4.2 Administration Guide 1674
Fortinet Inc.
Switch Controller
Use FortiSwitch to query FortiGuard IoT service for device details
FortiSwitch can work with FortiGate and the FortiGuard IoT detection service to perform device identification.
FortiSwitch devices can assist FortiGates with capturing accurate device information, allowing FortiGate to identify
devices for the user device list. When the FortiGuard IoT detection service is activated, FortiGate will leverage the IoT
detection service to help reduce the workload for device identification.
To use this feature, the following are required:
l An IoT detection service subscription, see IoT detection service on page 818.
l FortiSwitch 2.0.3 and higher.
The following CLI commands control when FortiSwitch should start and stop collecting device packets for FortiGate:
config switch-controller system
set iot-weight-threshold <integer>
set iot-scan-interval <integer>
set iot-holdoff <integer>
set iot-mac-idle <integer>
end
Parameter Description
iot-weight-threshold The confidence value for the MAC entry (disable = 0, default = 1).
iot-scan-interval The IoT scan interval, in minutes (2 - 4294967295, disable = 0, default = 60).
iot-holdoff The creation time for the MAC entry, in minutes (default = 5).
The time must be greater than this value for an entry to be created.
iot-mac-idle The idle time for the MAC entry, in minutes (default = 1440).
The MAC entry is removed after this value.
Example
In this example, FortiSwitch will help FortiGate collect packets from FortiAP every 30 minutes and stop for 30 minutes.
FortiSwitch will stop collecting packets from FortiAP when the weight of the device information reaches a threshold of 80.
To configure IoT device information collection for identification:
1. On the FortiGate, configure the switch controller IoT parameters:
config switch-controller system
set iot-weight-threshold 80
set iot-scan-interval 30
FortiOS 6.4.2 Administration Guide 1675
Fortinet Inc.
Switch Controller
set iot-holdoff 5
set iot-mac-idle 1440
end
2. On the FortiSwitch, create a sniffer profile to help collect the data:
config system sniffer-profile
edit "08:5b:0e:06:6a:d4"
set filter "ether host 08:5b:0e:06:6a:d4"
set max-pkt-count 1000
set max-pkt-len 256
set switch-interface "port1"
next
end
See the FortiSwitch CLI Reference for more information.
To confirm that the scan is working:
1. When the packet capture scheduled time is reached, check that the scan has started:
# diagnose switch-controller traffic-capture show
MAC session-in-use switch fortilink-interface-name
port status
========================================================================================
=================================
08:5b:0e:06:6a:d4 1 S248EPTF00000000 port11
port1 running
Global stats:
================
node add = 16
node delete = 15
node add failed = 0
node delete failed = 0
2. Data are collected and sent to the FortiGuard service for identification. Device information is updated in the device
list to include src fortiguard:
# diagnose user device list
hosts
vd vdom1/1 08:5b:0e:06:6a:d4 gen 17 req OUA/34
created 42s gen 13 seen 1s onboarding.13 gen 4
hardware vendor 'FORTINET' src fortiguard id 0 weight 100
type 'Network' src fortiguard id 0 weight 100
family 'Router' src fortiguard id 0 weight 100
os 'NULL' src fortiguard id 0 weight 100
hardware version 'FortiAP-320B' src fortiguard id 0 weight 100
host 'FP320B3X13000599' src capwap
Voice device detection
FortiSwitch is able to parse LLDP messages from voice devices such as FortiFone, and pass this information to
FortiGate for device detection. You can use FortiSwitch NAC policies to assign a device to an LLDP profile, QoS policy,
FortiOS 6.4.2 Administration Guide 1676
Fortinet Inc.
Switch Controller
and VLAN policy. When a detected device is matched to a NAC policy, the corresponding policy actions will be applied
on the switch port.
Example
In the following example, FortiFone is connected to port11 of FortiSwitch. A NAC policy is created to apply a VLAN
policy, LLDP policy, and QoS policy to Device Family FortiFone.
To create a FortiSwitch NAC policy in the GUI:
1. Configure a NAC policy on a switch port. See NAC policies on switch ports on page 1669.
2. Go to WiFi & Switch Controller > FortiSwitch NAC Policies.
3. Create or edit an NAC policy.
4. Set the Category to Device.
5. Enable Device family, and enter name such as FortiFone.
6. Select Apply Port Specific Settings.
7. Enable LLDP profile, and select a voice profile from the dropdown.
8. Enable QoS policy, and select a voice policy from the dropdown.
9. Enable VLAN policy, and select a voice policy from the dropdown.
10. Click OK.
The NAC policy is applied after a FortiFone is plugged into port11 of the FortiSwitch:
FortiOS 6.4.2 Administration Guide 1677
Fortinet Inc.
Switch Controller
To create a FortiSwitch NAC policy in the CLI:
1. Assign the FortiFone to a VLAN policy, LLDP policy, and QoS Policy.
config user nac-policy
edit "FortiFone"
set family "FortiFone"
set switch-fortilink "fortilink"
set switch-port-policy "FortiFone"
next
end
config switch-controller port-policy
edit "FortiFone"
set fortilink "fortilink"
set lldp-profile "fortivoice.fortilink"
set qos-policy "voice-qos"
set vlan-policy "fortiFone"
next
end
config switch-controller vlan-policy
edit "fortiFone"
set fortilink "fortilink"
set vlan "voice"
next
end
config switch-controller lldp-profile
edit "fortivoice.fortilink"
set med-tlvs inventory-management network-policy location-identification
set auto-isl disable
config med-network-policy
edit "voice"
set status enable
set vlan-intf "voice"
set assign-vlan enable
FortiOS 6.4.2 Administration Guide 1678
Fortinet Inc.
Switch Controller
set dscp 46
next
edit "voice-signaling"
set status enable
set vlan-intf "voice"
set assign-vlan enable
set dscp 46
next
edit "guest-voice"
next
edit "guest-voice-signaling"
next
edit "softphone-voice"
next
edit "video-conferencing"
next
edit "streaming-video"
next
edit "video-signaling"
next
end
next
end
config switch-controller qos qos-policy
edit "voice-qos"
set trust-dot1p-map "voice-dot1p"
set trust-ip-dscp-map "voice-dscp"
set queue-policy "voice-egress"
next
end
2. FortiSwitch receives an LLDP message from FortiFone after it is plugged into port11.
3. Run diagnose switch-controller switch-info to check the device information on FortiGate. The
FortiFone is identified.
# diagnose switch-controller switch-info lldp neighbors-detail S124EP5918000276 port11
Vdom: root
Managed Switch : S124EP5918000276 0
Capability codes:
R:Router, B:Bridge, T:Telephone, C:DOCSIS Cable Device
W:WLAN Access Point, P:Repeater, S:Station, O:Other
MED TLV Capability codes:
C:Capabilities, P:Network Policies, L:Location, S:MDI PSE
D:MDI PD, I:Inventory
_______________________________________________________________
Neighbor learned on port port11 by LLDP protocol
Last change 20 seconds ago
Last packet received 20 seconds ago
Chassis ID: 169.254.15.3 (ip)
System Name: FON-675i
System Description:
:14.0.0.1.r4
Time To Live: 60 seconds
FortiOS 6.4.2 Administration Guide 1679
Fortinet Inc.
Switch Controller
System Capabilities: BT
Enabled Capabilities: BT
MED type: Communication Device Endpoint (Class III)
MED Capabilities: CP
Management IP Address: 169.254.15.3
Port ID: 70:4c:a5:e2:6b:b2 (mac)
Port description: WAN Port 10M/100M/1000M
IEEE802.3, Power via MDI:
Power devicetype: PD
PSE MDI Power: Not Supported
PSE MDI Power Enabled: No
PSE Pair Selection: Can not be controlled
PSE power pairs: Signal
Power class: 1 (class-0)
Power type: 802.3at off
Power source: Unknown
Power priority: Unknown
Power requested: 0.0W
Power allocated: 0.0W
LLDP-MED, Network Policies:
voice: VLAN: 256 (untagged), Priority: 0 DSCP: 46
voice-signaling: VLAN: 256 (untagged), Priority: 0 DSCP: 46
streaming-video: VLAN: 256 (untagged), Priority: 0 DSCP: 46
# diagnose user device list
hosts
vd root/0 70:4c:a5:e2:6b:b2 gen 5 req OUA/34
created 3522s gen 3 seen 24s onboarding gen 2
hardware vendor 'Fortinet' src lldp weight 128
type 'IP Phone' src lldp id 1523 weight 128
family 'FortiFone' src lldp id 1523 weight 128
host 'FON-675i' src lldp
FortiSwitch multi-tenant support
A virtual switch provides a container for physical ports to be loaned to other VDOMs, allowing local management of the
resource.
The following example shows how to export managed FortiSwitch ports to multitenant VDOMs. In this example, the
owner VDOM is vdom1, and the tenant VDOM is root.
To export managed FortiSwitch ports to multitenant VDOMs:
1. Configure the switch VLAN interface, and assign it to the tenant VDOM:
(vdom1) # config system interface
edit "fsw_vlan"
set vdom "root"
set device-identification enable
set role lan
set snmp-index 32
set interface "fsw"
FortiOS 6.4.2 Administration Guide 1680
Fortinet Inc.
Switch Controller
set vlanid 100
next
end
2. In the tenant VDOM, designate the default-virtual-switch-vlan, which is used to set the native VLAN of
ports leased from the owner VDOM:
(root) # config switch-controller global
set default-virtual-switch-vlan "fsw_vlan"
end
3. On vdom1, export the managed switch ports to the root:
(vdom1) # config switch-controller managed-switch
edit S248EPTF1800XXXX
set fsw-wan1-peer "fsw"
set fsw-wan1-admin enable
set version 1
set dynamic-capability 100531703
config ports
edit "port1"
set export-to "root"
next
...
end
next
end
The lease port is now available under the tenant VDOM:
(root) # config switch-controller managed-switch
show
config switch-controller managed-switch
edit "S248EPTF1800XXXX"
set type virtual
set owner-vdom "vdom1"
config ports
edit "port1"
set vlan "fsw_vlan"
next
end
next
end
4. Export the managed FortiSwitch port to a virtual port pool for the tenant VDOM to choose from:
(vdom1) # config switch-controller virtual-port-pool
edit "tenant-monthly"
next
end
(vdom1) # config switch-controller managed-switch
edit "S248EPTF1800XXXX"
set fsw-wan1-peer "fsw"
set fsw-wan1-admin enable
set version 1
set dynamic-capability 100531703
config ports
edit "port2"
FortiOS 6.4.2 Administration Guide 1681
Fortinet Inc.
Switch Controller
set vlan "vsw.fsw"
set allowed-vlans "qtn.fsw"
set untagged-vlans "qtn.fsw"
set export-to-pool "tenant-monthly"
set export-to "vdom1"
next
...
end
next
end
5. Request the available port in the virtual port pool to use the switch port:
(root) # execute switch-controller virtual-port-pool request S248EPTF1800XXXX port2
(root) # config switch-controller managed-switch
edit "S248EPTF1800XXXX"
set type virtual
set owner-vdom "vdom1"
config ports
edit "port2"
set vlan "fsw_vlan"
next
end
next
end
6. Return the port after use:
(root) # execute switch-controller virtual-port-pool return S248EPTF1800XXXX port2
7. Configure tags for the switch ports so the tags can be exported to virtual port pools
(vdom1) # config switch-controller switch-interface-tag
edit "vip"
next
edit "gold"
next
edit "silver"
next
end
(vdom1) # config switch-controller managed-switch
edit "S248EPTF1800XXXX"
set fsw-wan1-peer "fsw"
set fsw-wan1-admin enable
set version 1
set dynamic-capability 100531703
config ports
edit "port2"
set export-to-pool "tenant-monthly"
set export-tags "silver"
set export-to "root"
next
edit "port3"
set vlan "vsw.fsw"
set allowed-vlans "qtn.fsw"
set untagged-vlans "qtn.fsw"
set export-to-pool "tenant-monthly"
FortiOS 6.4.2 Administration Guide 1682
Fortinet Inc.
Switch Controller
set export-tags "vip"
set export-to "vdom1"
next
edit "port4"
set vlan "vsw.fsw"
set allowed-vlans "qtn.fsw"
set untagged-vlans "qtn.fsw"
set export-to-pool "tenant-monthly"
set export-tags "vip" "silver"
set export-to "vdom1"
next
end
next
end
8. Search for ports using tag filters:
(vdom1) # execute switch-controller virtual-port-pool show-by-tag silver
Switch Port Properties Tags
----------------------------------------------------------------------------------------
tenant-monthly(vdom.vdom1)
S248EPTF1800XXXX port2 (root) 10M/100M/1G/ silver
S248EPTF1800XXXX port4 10M/100M/1G/ vip,silver
(vdom1) # exe switch-controller virtual-port-pool show-by-tag vip
Switch Port Properties Tags
----------------------------------------------------------------------------------------
tenant-monthly(vdom.vdom1)
S248EPTF1800XXXX port3 10M/100M/1G/ vip
S248EPTF1800XXXX port4 10M/100M/1G/ vip,silver
Persistent MAC learning
Persistent MAC learning or sticky MAC is a port security feature where dynamically learned MAC addresses are retained
when a switch or interface comes back online. The benefits of this feature include:
l Prevent traffic loss from trusted workstations and servers since there is no need to relearn MAC address after a
restart.
l Protect the switch and the whole network when combined with MAC-learning-limit against security attacks such as
Layer 2 DoS and overflow attacks.
Persistent MAC learning is configured in FortiGate and implemented in FortiSwitch.
This feature is disabled by default. You can use persistent MAC learning together with MAC limiting to restrict the
number of persistent MAC addresses.
This feature is hardware and CPU intensive and can take several minutes depending on the number of entries.
You can only use CLI to configure this feature.
This feature is supported on all FortiSwitch models in FSW 6.0.
This feature is supported on models in FSW 3.6 higher than the 124D series.
FortiOS 6.4.2 Administration Guide 1683
Fortinet Inc.
Switch Controller
To enable sticky MAC on FortiGate:
config switch-controller managed-switch
edit <switch-serial-number>
conf ports
edit <port-number>
set sticky-mac enable
next
end
next
end
Before saving sticky Mac entries into CMDB, you might want to delete the unsaved sticky MAC items so that only the
items you want are saved.
Saving sticky MAC items copies the sticky MAC items from memory to CMDB on FortiSwitches and FortiGates.
To delete unsaved sticky MAC items:
execute switch-controller switch-action sticky-mac delete-unsaved <all | interface><switch-
serial-number>
To save sticky MAC items into CMDB:
execute switch-controller switch-action sticky-mac save <all | interface><switch-serial-
number>
Split port mode (for QSFP / QSFP28)
The quad, small, form-factor pluggable plus (QSFP/QSPF28) is a transceiver module that offers high-density 40/100
Gigabit Ethernet connectivity options for data center and high-performance computing networks. The QSFP transceiver
module is a hot-swappable, parallel fiber-optic/copper module with four independent optical transmit and receive
channels. These channels can terminate in another Ethernet QSFP transceiver, or the channels can be broken out to
four separate physical ports.
Configuration of which FortiSwitch ports are split is controlled directly on the FortiSwitch. An administrator needs to
manually log into the FortiSwitch and set the desired split port configuration. After a split port configuration change is
made on the FortiSwitch, it will automatically reboot. If the FortiSwitch was previously discovered or authorized, it should
be deleted to allow the switch to be newly discovery again.
This feature requires a FortiSwitch model with SFP+ 40G ports, and FortiSwitch must be in
Fortlink mode when changing the split configuration.
To use previously discovered FortiSwitch with split ports with the switch controller:
1. On FortiSwitch, change the split mode:
This change requires a reboot.
config switch phy-mode
set port29-phy-mode 4x10G
set port30-phy-mode 4x10G
FortiOS 6.4.2 Administration Guide 1684
Fortinet Inc.
Switch Controller
end
2. Delete the FortiSwitch from managed-switch stanza.
3. Discover and authorize.
To use FortiSwitch with factory defaults with split ports with the switch controller:
1. Discover and Authorize.
This change requires a reboot.
2. On FortiSwitch, change split mode.
This change requires a reboot.
3. Delete switch from managed-switch stanza.
4. Discover and authorize.
config switch-controller managed-switch
edit S524DN4K15000008
config ports
edit "port29.1"
set speed 10000
set vlan "vsw.port11"
set allowed-vlans "qtn.port11"
set untagged-vlans "qtn.port11"
set export-to "root"
next
......
edit "port29.4"
set speed 10000
set vlan "vsw.port11"
set allowed-vlans "qtn.port11"
set untagged-vlans "qtn.port11"
set export-to "root"
next
edit "port30.1"
set speed 10000
set vlan "vsw.port11"
set allowed-vlans "qtn.port11"
set untagged-vlans "qtn.port11"
set export-to "root"
next
......
edit "port30.4"
set speed 10000
set vlan "vsw.port11"
set allowed-vlans "qtn.port11"
set untagged-vlans "qtn.port11"
set export-to "root"
next
end
next
end
FortiOS 6.4.2 Administration Guide 1685
Fortinet Inc.
Switch Controller
Dynamic VLAN name assignment from RADIUS attribute
On the FortiGate, all VLANs are specified as a system interface. Each system interface has a well-defined and unique
name. When running FortiLink, the switch has no knowledge of the name association. The switch communicates directly
with the RADIUS server and needs to know the mapping to make the proper selection. This information must be
provided to the switch.
In order to make the feature generic and applicable to the switch in standalone mode, the system interface description
field is leveraged. The switch-controller synchronizes this field to the switch for information purposes. All descriptions on
the FortiGate remain on the FortiGate. The switch-controller synchronizes the FortiGate system interface name to the
switch VLAN description.
When FortiSwitch receives a VLAN assignment from a RADIUS server, it determines if the data is an integer or string
representation. If the representation is an integer, FortiSwitch assigns the VLAN. If the representation is a string, the
802.1x agent searches each FortiGate VLAN description field and, if a match is found, synchronizes the FortiGate
interface name to the switch's VLAN description. If no match is found, it will generate a syslog error stating that the VLAN
string was not found, the assingment could not be made, and the result is treated as in unauthorized or a failure.
To configure dynamic VLAN name assignment:
1. Configure a RADIUS server:
l Set Tunnel-Type to "VLAN"
l Set Tunnel-Medium-Type to "IEEE-802"
l Set Tunnel-Private-Group-Id to "my.vlan.10"
Designate the VLAN name instead of VLAN ID.
2. Configure the FortiGate:
config system interface
edit "my.vlan.10"
set vdom "root"
set ip 1.1.1.254 255.255.255.0
set allowaccess ping
set interface "my.fortlink"
set vlanid 10
next
end
3. Configure the FortiSwitch:
config switch vlan
edit 10
set description "my.vlan.10"
next
end
MPSK groups
Users can batch generate or import MPSK keys, export MPSK keys to a CSV file, dynamically assign VLANs based on
used MPSK, and apply an MPSK schedule in the GUI.
FortiOS 6.4.2 Administration Guide 1686
Fortinet Inc.
Switch Controller
In the GUI, MPSK key entries are organized in different MPSK groups. An MPSK group can be created manually or
imported. When MPSK is enabled, the previous single passphrase is dropped and a dynamic VLAN is automatically
enabled.
In the CLI, an mpsk-profile is assigned in the VAP settings and MPSK is enabled. The dynamic VLAN is
automatically enabled. Only one MPSK profile can be assigned to one VAP at a time.
To use an MPSK group in the GUI:
1. Go to WiFi & Switch Controller > SSIDs and click Create New > SSID.
2. Enter a name and ensure the Security mode is set to WPA2 Personal.
3. In the Pre-shared Key section, select a Mode (Multiple is used in this example).
4. In the table, click Add > Create Group.
5. Enter a group name and VLAN ID.
FortiOS 6.4.2 Administration Guide 1687
Fortinet Inc.
Switch Controller
6. Configure the pre-shared key settings:
a. In the table, click Add > Generate Keys.
b. Configure the settings as needed and click OK.
7. Click OK to close the Pre-shared Key Group window.
8. Click OK.
FortiOS 6.4.2 Administration Guide 1688
Fortinet Inc.
Switch Controller
9. Go to WiFi & Switch Controller > WiFi Clients to view the MPSK name in the Pre-shared Key column.
To use an MPSK profile in the CLI:
1. Configure the MPSK profile:
config wireless-controller mpsk-profile
edit "wifi-mpsk"
config mpsk-group
edit "group-a"
set vlan-type fixed-vlan
set vlan-id 10
config mpsk-key
edit "key-a-1"
set passphrase ENC
set mpsk-schedules "always"
next
end
next
edit "group-b"
set vlan-type fixed-vlan
set vlan-id 20
config mpsk-key
edit "key-b-1"
set passphrase ENC
set concurrent-client-limit-type unlimited
set mpsk-schedules "always"
next
end
next
end
next
end
2. Configure the VAP settings:
config wireless-controller vap
edit "wifi-mpsk"
set ssid "wifi-mpsk"
set local-bridging enable
set schedule "always"
set mpsk-profile "wifi-mpsk"
set dynamic-vlan enable
next
end
FortiOS 6.4.2 Administration Guide 1689
Fortinet Inc.
Switch Controller
3. Verify the event log after the WiFi client is connected:
1: date=2020-07-10 time=16:57:20 logid="0104043573" type="event" subtype="wireless"
level="notice" vd="root" eventtime=1594425440439070726 tz="-0700" logdesc="Wireless
client authenticated" sn="FP423E3X16000320" ap="FP423E3X16000320" vap="wifi-mpsk"
ssid="wifi-mpsk" radioid=2 user="N/A" group="N/A" stamac="3c:2e:ff:83:91:33"
srcip=10.0.10.2 channel=144 radioband="802.11ac" signal=-52 snr=50 security="WPA2
Personal" encryption="AES" action="client-authentication" reason="Reserved 0" mpsk="key-
a-1" msg="Client 3c:2e:ff:83:91:33 authenticated."
MSTI support
Administrators can control multiple spanning tree instances (MSTI) one to 14, and allocate VLANs to specific instances.
VLANs that are not added to a specific interface are in MSTI-0. FortiLink controls MSTI-0 (CST) and MSTI-15 for
FortiLink management (VLAN 4094).
Each instance is a full and complete spanning tree. Any VLAN can be mapped to any instance, allowing the trees to have
different topologies for each MSTI. Various parameters can be configured in each instance, such as cost and priority.
To configure MSTI support:
1. Create a spanning tree protocol (STP) instance between 1 to 14:
config switch-controller stp-instance
edit 1
set vlan-range tenant-vlan3 vsw.aggr1
next
end
2. Configure a specific STP priority on different managed FortiSwitch units:
config switch-controller managed-switch
edit S248EPTF1800XXXX
config stp-instance
edit 1
set priority 8192
next
end
next
end
Netflow and IPFIX support
You can configure Netflow (v1, v5, and v9) and IP Flow Information Export (IPFIX) on managed FortiSwitch units on
switch controller. The resulting data are available in FortiView and to FortiAnalyzer for traffic statistics and topology
views. Traffic sampling data can be used to show which users and device behind a switch are generating the most traffic.
FortiOS 6.4.2 Administration Guide 1690
Fortinet Inc.
Switch Controller
The following CLI can be used to configure flow-tracking parameters:
config system flow-tracking
set sample-mode {local | perimeter | device-ingress}
set sample-rate <integer>
set format {netflow1 | netflow5 | netflow9 | ipfix}
set collector-ip <ip_address>
set collector-port <integer>
set transport {udp | tcp | sctp}
set level {vlan | ip | port | proto}
set max-export-pkt-size <integer>
set timeout-general <integer>
set timeout-icmp <integer>
set timeout-max <integer>
set timeout-tcp <integer>
set timeout-tcp-fin <integer>
set timeout-tcp-rst <integer>
set timeout-udp <integer>
config aggregates
edit <id>
set ip <ip_address>
next
end
end
Variable Description
sample-mode {local | perimeter | Sample mode for flow tracking.
device-ingress} l local: Sample on the specific FortiSwitch port. Sampling must be enabled
on the specific FortiSwitch ports using the config switch-controller
managed-switch and config ports commands.
l perimeter: Sample on all non-fabric FortiSwitch ports, including the access
and FortiLink ports, but not the FortiLink ISL port.
l device-ingress: Sample on all FortiSwitch ports.
sample-rate <integer> Sample rate for the perimeter and device-ingress sampling (0 - 99999, default =
512).
format {netflow1 | netflow5 | Flow tracking protocol (default = netflow9).
FortiOS 6.4.2 Administration Guide 1691
Fortinet Inc.
Switch Controller
Variable Description
netflow9 | ipfix}
collector-ip <ip_address> Collector IP address.
An all-zero IP address implies the feature is disabled
collector-port <integer> Collector port number (0 - 65535, default=0).
transport {udp | tcp | sctp} L4 transport protocol for exporting packets (default = udp).
level {vlan | ip | port | proto} Flow tracking level.
l vlan: Collect srcip/dstip/srcport/dstport/protocol/tos/vlan from the sample
packet.
l ip: Collect srcip/dstip from the sample packet (default).
l port: Collect srcip/dstip/srcport/dstport/protocol from the sample packet.
l proto: Collect srcip/dstip/protocol from the sample packet.
max-export-pkt-size <integer> Flow maximum export packet size, in bytes (512 - 9216, default = 512).
timeout-general <integer> Flow session general timeout, in seconds (60 - 604800, default = 3600).
timeout-icmp <integer> Flow session ICMP timeout, in seconds (60 - 604800, default = 300).
timeout-max <integer> Flow session maximum timeout, in seconds (60 - 604800, default = 604800).
timeout-tcp <integer> Flow session TCP timeout, in seconds (60 - 604800, default = 3600).
timeout-tcp-fin <integer> Flow session TCP FIN timeout, in seconds (60 - 604800, default = 300).
timeout-tcp-rst <integer> Flow session TCP RST timeout, in seconds (60 - 604800, default = 120).
timeout-udp <integer> Flow session UDP timeout, in seconds (60 - 604800, default = 300).
config aggregates subcommand:
Aggregates in which all traffic sessions matching the IP address will be grouped into the same flow.
ip <ip_address> IP address to group all matching traffic sessions to a flow.
ECN configuration for managed FortiSwitch devices
Explicit Congestion Notification (ECN) allows ECN enabled endpoints to notify each other when they are experiencing
congestion. It is supported on the following FortiSwitch models: 3032E, 3032D, 1048E, 1048D, 5xxD series, and 4xxE
series.
On the FortiGate that is managing the compatible FortiSwitch, ECN can be enabled for each class of service (CoS)
queue to enable packet marking to drop eligible packets. The command is only available when the dropping policy is
weighted random early detection. It is disabled by default.
To configure FortiSwitch to enable ECN packet marking to drop eligible packets:
config switch-controller qos queue-policy
edit "ECN_marking"
set schedule round-robin
FortiOS 6.4.2 Administration Guide 1692
Fortinet Inc.
Switch Controller
set rate-by kbps
config cos-queue
edit "queue-0"
set drop-policy weighted-random-early-detection
set ecn enable
next
edit "queue-1"
next
edit "queue-2"
next
...
end
next
end
PTP transparent clock mode configuration for managed FortiSwitch
devices
For communicating timing precision between two ends, PTP transparent clock mode can be enabled to measure and
adjust for packet delay. It is supported on the following FortiSwitch models: 3032E, 3032D, 1048E, 5xxD series, 4xxE
series, 424D, 224E, and 224D.
On the FortiGate that is managing the compatible FortiSwitch, switch controller PTP settings and policies can be
configured per VDOM. A PTP policy can also be selected for each FortiSwitch port.
To configure the switch controller PTP settings:
config switch-controller ptp settings
set mode {default | transparent-e2e | transparent-p2p}
end
default Disable the PTP function (default). Packets are forwarded with no action.
transparent-e2e Enable end-to-end transparent clock.
transparent-p2p Enable peer-to-peer transparent clock.
To configure a switch controller PTP policy:
config switch-controller ptp policy
edit "default"
set status enable
next
end
To set the PTP policy on a switch port:
config switch-controller managed-switch
edit "S524D00000000000"
config ports
edit "port1"
FortiOS 6.4.2 Administration Guide 1693
Fortinet Inc.
Switch Controller
set ptp-policy default
next
end
next
end
FortiOS 6.4.2 Administration Guide 1694
Fortinet Inc.
Log and Report
Logging and reporting are useful components to help you understand what is happening on your network, and to inform
you about certain network activities, such as the detection of a virus, a visit to an invalid website, an intrusion, a failed log
in attempt, and myriad others.
Logging records the traffic that passes through, starts from, or ends on the FortiGate, and records the actions the
FortiGate took during the traffic scanning process. After this information is recorded in a log message, it is stored in a log
file that is stored on a log device (a central storage location for log messages). FortiGates support several log devices,
such as FortiAnalyzer, FortiGate Cloud, and syslog servers. Approximately 5% of memory is used for buffering logs sent
to FortiAnalyzer. The FortiGate system memory and local disk can also be configured to store logs, so it is also
considered a log device.
Reports show the recorded activity in a more readable format. A report gathers all the log information that it needs, then
presents it in a graphical format with a customizable design and automatically generated charts showing what is
happening on the network. Reports can be generated on FortiGate devices with disk logging and on FortiAnalyzer
devices.
Performance statistics are not logged to disk. Performance statistics can be received by a
syslog server or by FortiAnalyzer.
The following topics provide information about logging and reporting:
l Viewing event logs on page 1695
l Sample logs by log type on page 1697
l Log buffer on FortiGates with an SSD disk on page 1715
l Checking the email filter log on page 1718
l Supported log types to FortiAnalyzer, syslog, and FortiAnalyzer Cloud on page 1719
l Configuring multiple FortiAnalyzers on a multi-VDOM FortiGate on page 1720
l Configuring multiple FortiAnalyzers (or syslog servers) per VDOM on page 1722
l Source and destination UUID logging on page 1724
l Logging the signal-to-noise ratio and signal strength per client on page 1726
l RSSO information for authenticated destination users in logs on page 1728
l Threat weight on page 1731
l Troubleshooting on page 1732
Viewing event logs
All event log subtypes are available from the introductory screen and the event log subtype dropdown list on the Log &
Report > Events page. Not all of the event log subtypes are available by default.
FortiOS 6.4.2 Administration Guide 1695
Fortinet Inc.
Log and Report
SD-WAN Events Always available.
System Events Always available.
Router Events Always available.
VPN Events Available when VPN is enabled in System > Feature Visibility.
User Events Always available.
Endpoint Events Available when Endpoint Control is enabled in System > Feature Visibility.
HA Events Always available.
Security Rating Events Always available, but logs are only generated when a Security Rating License is
registered.
WAN Opt. & Cache Events Available on devices with two hard disks by default. On devices with one hard
disk, the disk usage must be set to wanopt and then WAN Opt. & Cache must be
enabled in System > Feature Visibility.
WiFi Events Available on hardware devices when WiFi Controller is enabled in System >
Feature Visibility.
FortiExtender Events Available when FortiExtender is enabled in System > Feature Visibility.
SDN Connector Events Always available.
FortiOS 6.4.2 Administration Guide 1696
Fortinet Inc.
Log and Report
Sample logs by log type
This topic provides a sample raw log for each subtype and the configuration requirements.
Traffic Logs > Forward Traffic
Log configuration requirements
config firewall policy
edit 1
set srcintf "port12"
set dstintf "port11"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set utm-status enable
set logtraffic all
set application-list "g-default"
set ssl-ssh-profile "certificate-inspection"
set nat enable
next
end
Sample log
date=2019-05-10 time=11:37:47 logid="0000000013" type="traffic" subtype="forward"
level="notice" vd="vdom1" eventtime=1557513467369913239 srcip=10.1.100.11 srcport=58012
srcintf="port12" srcintfrole="undefined" dstip=23.59.154.35 dstport=80 dstintf="port11"
dstintfrole="undefined" srcuuid="ae28f494-5735-51e9-f247-d1d2ce663f4b" dstuuid="ae28f494-
5735-51e9-f247-d1d2ce663f4b" poluuid="ccb269e0-5735-51e9-a218-a397dd08b7eb" sessionid=105048
proto=6 action="close" policyid=1 policytype="policy" service="HTTP" dstcountry="Canada"
srccountry="Reserved" trandisp="snat" transip=172.16.200.2 transport=58012 appid=34050
app="HTTP.BROWSER_Firefox" appcat="Web.Client" apprisk="elevated" applist="g-default"
duration=116 sentbyte=1188 rcvdbyte=1224 sentpkt=17 rcvdpkt=16 utmaction="allow" countapp=1
osname="Ubuntu" mastersrcmac="a2:e9:00:ec:40:01" srcmac="a2:e9:00:ec:40:01" srcserver=0
utmref=65500-742
Traffic Logs > Local Traffic
Log configuration requirements
config log setting
set local-in-allow enable
set local-in-deny-unicast enable
set local-in-deny-broadcast enable
set local-out enable
end
FortiOS 6.4.2 Administration Guide 1697
Fortinet Inc.
Log and Report
Sample log
date=2019-05-10 time=11:50:48 logid="0001000014" type="traffic" subtype="local"
level="notice" vd="vdom1" eventtime=1557514248379911176 srcip=172.16.200.254 srcport=62024
srcintf="port11" srcintfrole="undefined" dstip=172.16.200.2 dstport=443 dstintf="vdom1"
dstintfrole="undefined" sessionid=107478 proto=6 action="server-rst" policyid=0
policytype="local-in-policy" service="HTTPS" dstcountry="Reserved" srccountry="Reserved"
trandisp="noop" app="Web Management(HTTPS)" duration=5 sentbyte=1247 rcvdbyte=1719 sentpkt=5
rcvdpkt=6 appcat="unscanned"
Traffic Logs > Multicast Traffic
Log configuration requirements
config firewall multicast-policy
edit 1
set dstaddr 230-1-0-0
set dstintf port3
set srcaddr 172-16-200-0
set srcintf port25
set action accept
set log enable
next
end
config system setting
set multicast-forward enable
end
Sample log
date=2019-03-31 time=06:42:54 logid="0002000012" type="traffic" subtype="multicast"
level="notice" vd="vdom1" eventtime=1554039772 srcip=172.16.200.55 srcport=60660
srcintf="port25" srcintfrole="undefined" dstip=230.1.1.2 dstport=7878 dstintf="port3"
dstintfrole="undefined" sessionid=1162 proto=17 action="accept" policyid=1
policytype="multicast-policy" service="udp/7878" dstcountry="Reserved" srccountry="Reserved"
trandisp="noop" duration=22 sentbyte=5940 rcvdbyte=0 sentpkt=11 rcvdpkt=0 appcat="unscanned"
Traffic Logs > Sniffer Traffic
Log configuration requirements
config firewall sniffer
edit 3
set logtraffic all
set interface "port1"
set ips-sensor-status enable
set ips-sensor "sniffer-profile"
next
end
FortiOS 6.4.2 Administration Guide 1698
Fortinet Inc.
Log and Report
Sample log
date=2019-05-10 time=14:18:54 logid="0004000017" type="traffic" subtype="sniffer"
level="notice" vd="root" eventtime=1557523134021045897 srcip=208.91.114.4 srcport=50463
srcintf="port1" srcintfrole="undefined" dstip=104.80.88.154 dstport=443 dstintf="port1"
dstintfrole="undefined" sessionid=2193276 proto=6 action="accept" policyid=3
policytype="sniffer" service="HTTPS" dstcountry="United States" srccountry="Canada"
trandisp="snat" transip=0.0.0.0 transport=0 duration=10 sentbyte=0 rcvdbyte=0 sentpkt=0
rcvdpkt=0 appcat="unscanned" utmaction="allow" countips=1 crscore=5 craction=32768
sentdelta=0 rcvddelta=0 utmref=65162-7772
Event Logs > SD-WAN Events
Log configuration requirements
config log eventfilter
set event enable
set sdwan enable
end
Sample log
date=2020-03-29 time=16:41:30 logid="0113022923" type="event" subtype="sdwan" level="notice"
vd="root" eventtime=1585525290513555981 tz="-0700" logdesc="Virtual WAN Link status"
eventtype="Health Check" healthcheck="ping1" slatargetid=1 oldvalue="1" newvalue="2"
msg="Number of pass member changed."
date=2020-03-29 time=16:51:27 logid="0113022925" type="event" subtype="sdwan" level="notice"
vd="root" eventtime=1585525888177637570 tz="-0700" logdesc="Virtual WAN Link SLA
information" eventtype="SLA" healthcheck="ping1" slatargetid=1 interface="R150" status="up"
latency="0.013" jitter="0.001" packetloss="100.000%" inbandwidth="0kbps"
outbandwidth="0kbps" bibandwidth="0kbps" slamap="0x0" metric="packetloss" msg="Health Check
SLA status. SLA failed due to being over the performance metric threshold."
Event Logs > System Events
Log configuration requirements
config log eventfilter
set event enable
set system enable
end
Sample log
date=2019-05-13 time=11:20:54 logid="0100032001" type="event" subtype="system"
level="information" vd="vdom1" eventtime=1557771654587081441 logdesc="Admin login
successful" sn="1557771654" user="admin" ui="ssh(172.16.200.254)" method="ssh"
srcip=172.16.200.254 dstip=172.16.200.2 action="login" status="success" reason="none"
profile="super_admin" msg="Administrator admin logged in successfully from ssh
(172.16.200.254)"
FortiOS 6.4.2 Administration Guide 1699
Fortinet Inc.
Log and Report
Event Logs > Router Events
Log configuration requirements
config log eventfilter
set event enable
set router enable
end
config router bgp
set log-neighbour-changes enable
end
config router ospf
set log-neighbour-changes enable
end
Sample log
date=2019-05-13 time=14:12:26 logid="0103020301" type="event" subtype="router"
level="warning" vd="root" eventtime=1557781946677737955 logdesc="Routing log" msg="OSPF:
RECV[Hello]: From 31.1.1.1 via port9:172.16.200.1: Invalid Area ID 0.0.0.0"
Event Logs > VPN Events
Log configuration requirements
config log eventfilter
set event enable
set vpn enable
end
Sample log
date=2019-05-13 time=14:21:42 logid="0101037127" type="event" subtype="vpn" level="notice"
vd="root" eventtime=1557782502722231889 logdesc="Progress IPsec phase 1" msg="progress IPsec
phase 1" action="negotiate" remip=50.1.1.101 locip=50.1.1.100 remport=500 locport=500
outintf="port14" cookies="9091f4d4837ea71c/0000000000000000" user="N/A" group="N/A"
xauthuser="N/A" xauthgroup="N/A" assignip=N/A vpntunnel="test" status="success" init="local"
mode="main" dir="outbound" stage=1 role="initiator" result="OK"
Event Logs > User Events
Log configuration requirements
config log eventfilter
set event enable
set user enable
end
FortiOS 6.4.2 Administration Guide 1700
Fortinet Inc.
Log and Report
Sample log
date=2019-05-13 time=15:55:56 logid="0102043008" type="event" subtype="user" level="notice"
vd="root" eventtime=1557788156913809277 logdesc="Authentication success" srcip=10.1.100.11
dstip=172.16.200.55 policyid=1 interface="port10" user="bob" group="local-group1"
authproto="TELNET(10.1.100.11)" action="authentication" status="success" reason="N/A"
msg="User bob succeeded in authentication"
Event Logs > Endpoint Events
Log configuration requirements
config log eventfilter
set event enable
set endpoint enable
end
Sample log
date=2019-05-14 time=08:32:13 logid="0107045057" type="event" subtype="endpoint"
level="information" vd="root" eventtime=1557847933900764210 logdesc="FortiClient connection
added" action="add" status="success" license_limit="unlimited" used_for_type=4 connection_
type="sslvpn" count=1 user="skubas" ip=172.18.64.250 name="VAN-200957-PC"
fctuid="52C66FE08F724FE0B116DAD5062C96CD" msg="Add a FortiClient Connection."
date=2019-05-14 time=08:19:38 logid="0107045058" type="event" subtype="endpoint"
level="information" vd="root" eventtime=1557847179037488154 logdesc="FortiClient connection
closed" action="close" status="success" license_limit="unlimited" used_for_type=5
connection_type="sslvpn" count=1 user="skubas" ip=172.18.64.250 name="VAN-200957-PC"
fctuid="52C66FE08F724FE0B116DAD5062C96CD" msg="Close a FortiClient Connection."
Event Logs > HA Events
Log configuration requirements
config log eventfilter
set event enable
set ha enable
end
Sample log
date=2019-05-10 time=09:53:18 logid="0108037894" type="event" subtype="ha" level="critical"
vd="root" eventtime=1557507199208575235 logdesc="Virtual cluster member joined" msg="Virtual
cluster detected member join" vcluster=1 ha_group=0 sn="FG2K5E3916900286"
Event Logs > Security Rating Events
Log configuration requirements
config log eventfilter
set event enable
FortiOS 6.4.2 Administration Guide 1701
Fortinet Inc.
Log and Report
set security-rating enable
end
Sample log
date=2019-05-13 time=14:40:59 logid="0110052000" type="event" subtype="security-rating"
level="notice" vd="root" eventtime=1557783659536252389 logdesc="Security Rating summary"
auditid=1557783648 audittime=1557783659 auditscore="5.0" criticalcount=1 highcount=6
mediumcount=8 lowcount=0 passedcount=38
Event Logs > WAN Opt & Cache Events
Log configuration requirements
config log eventfilter
set event enable
set wan-opt enable
end
Sample log
date=2019-05-14 time=09:37:46 logid="0105048039" type="event" subtype="wad" level="error"
vd="root" eventtime=1557851867382676560 logdesc="SSL fatal alert sent" session_id=0
policyid=0 srcip=0.0.0.0 srcport=0 dstip=208.91.113.83 dstport=636 action="send" alert="2"
desc="certificate unknown" msg="SSL Alert sent"
date=2019-05-10 time=15:48:31 logid="0105048038" type="event" subtype="wad" level="error"
vd="root" eventtime=1557528511221374615 logdesc="SSL Fatal Alert received" session_
id=5f88ddd1 policyid=0 srcip=172.18.70.15 srcport=59880 dstip=91.189.89.223 dstport=443
action="receive" alert="2" desc="unknown ca" msg="SSL Alert received"
Event Logs > Wireless
Log configuration requirements
config log eventfilter
set event enable
set wireless-activity enable
end
config wireless-controller log
set status enable
end
Sample log
date=2019-05-13 time=11:30:08 logid="0104043568" type="event" subtype="wireless"
level="warning" vd="vdom1" eventtime=1557772208134721423 logdesc="Fake AP on air"
ssid="fortinet" bssid="90:6c:ac:89:e1:fa" aptype=0 rate=130 radioband="802.11n" channel=6
action="fake-ap-on-air" manuf="Fortinet, Inc." security="WPA2 Personal" encryption="AES"
signal=-93 noise=-95 live=353938 age=505 onwire="no" detectionmethod="N/A" stamac="N/A"
apscan="N/A" sndetected="N/A" radioiddetected=0 stacount=0 snclosest="FP320C3X17001909"
radioidclosest=0 apstatus=0 msg="Fake AP On-air fortinet 90:6c:ac:89:e1:fa chan 6 live
353938 age 505"
FortiOS 6.4.2 Administration Guide 1702
Fortinet Inc.
Log and Report
Event Logs > SDN Connector
Log configuration requirements
config log eventfilter
set event enable
set connector enable
end
Sample log
date=2019-05-13 time=16:09:43 logid="0112053200" type="event" subtype="connector"
level="information" vd="root" eventtime=1557788982 logdesc="IP address added" cfgobj="aws1"
action="object-add" addr="54.210.36.196" cldobjid="i-0fe5a1ef16bb94796" netid="vpc-97e81cee"
msg="connector object discovered in addr-obj aws1, 54.210.36.196"
date=2019-05-13 time=16:09:43 logid="0112053201" type="event" subtype="connector"
level="information" vd="root" eventtime=1557788982 logdesc="IP address removed"
cfgobj="aws1" action="object-remove" addr="172.31.31.101" cldobjid="i-0fe5a1ef16bb94796"
netid="vpc-97e81cee" msg="connector object removed in addr-obj aws1, 172.31.31.101"
Event Logs > FortiExtender Events
Log configuration requirements
config log eventfilter
set event enable
set fortiextender enable
end
Sample log
date=2019-02-20 time=09:57:22 logid="0111046400" type="event" subtype="fortiextender"
level="notice" vd="root" eventtime=1550685442 logdesc="FortiExtender system activity"
action="FortiExtender Authorized" msg="ext SN:FX04DN4N16002352 authorized"
date=2019-02-20 time=09:51:42 logid="0111046401" type="event" subtype="fortiextender"
level="notice" vd="root" eventtime=1550685102 logdesc="FortiExtender controller activity"
sn="FX04DN4N16002352" ip=11.11.11.2 action="ext session-deauthed" msg="ext
SN:FX04DN4N16002352 deauthorized"
date=2019-02-20 time=10:02:26 logid="0111046409" type="event" subtype="fortiextender"
level="information" vd="root" eventtime=1550685746 logdesc="Remote FortiExtender info
activity" sn="FX04DN4N16002352" ip=11.11.11.2 action="Cellular Connected"
imei="359376060442770" imsi="302720502331361" iccid="89302720403038146410"
phonenumber="+16045067526" carrier="Rogers" plan="Rogers-plan" apn="N/A" service="LTE"
msg="FX04DN4N16002352 STATE: sim with imsi:302720502331361 in slot:2 on carrier:Rogers
connected"
date=2019-02-20 time=10:33:57 logid="0111046407" type="event" subtype="fortiextender"
level="warning" vd="root" eventtime=1550687636 logdesc="Remote FortiExtender warning
activity" sn="FX04DN4N16002352" ip=11.11.11.2 action="Cellular Disconnected"
imei="359376060442770" imsi="N/A" iccid="N/A" phonenumber="N/A" carrier="N/A" plan="N/A"
apn="N/A" service="LTE" msg="FX04DN4N16002352 STATE: sim with imsi: in slot:2 on carrier:N/A
disconnected"
FortiOS 6.4.2 Administration Guide 1703
Fortinet Inc.
Log and Report
date=2019-02-20 time=10:02:24 logid="0111046409" type="event" subtype="fortiextender"
level="information" vd="root" eventtime=1550685744 logdesc="Remote FortiExtender info
activity" sn="FX04DN4N16002352" ip=11.11.11.2 action="Cellular Connecting"
imei="359376060442770" imsi="302720502331361" iccid="89302720403038146410"
phonenumber="+16045067526" carrier="Rogers" plan="Rogers-plan" apn="N/A" service="N/A"
msg="FX04DN4N16002352 STATE: sim with imsi:302720502331361 in slot:2 on carrier:Rogers
connecting
date=2019-02-20 time=10:47:19 logid="0111046407" type="event" subtype="fortiextender"
level="warning" vd="root" eventtime=1550688438 logdesc="Remote FortiExtender warning
activity" sn="FX04DN4N16002352" ip=11.11.11.2 action="SIM Change" imei="N/A" slot=2
msg="FX04DN4N16002352 SIM: SIM2 is inserted"
date=2019-02-20 time=10:57:50 logid="0111046407" type="event" subtype="fortiextender"
level="warning" vd="root" eventtime=1550689069 logdesc="Remote FortiExtender warning
activity" sn="FX04DN4N16002352" ip=11.11.11.2 action="SIM Change" imei="359376060442770"
slot=1 msg="FX04DN4N16002352 SIM: SIM2 is plucked out"
date=2019-02-20 time=12:02:24 logid="0111046407" type="event" subtype="fortiextender"
level="warning" vd="root" eventtime=1550692942 logdesc="Remote FortiExtender warning
activity" sn="FX04DN4N16002352" ip=11.11.11.2 action="SIM Switch" imei="359376060442770"
reason="sim-switch can't take effect due to unavailability of 2 sim cards"
msg="FX04DN4N16002352 SIM: sim-switch can't take effect due to unavailability of 2 sim
cards"
date=2019-02-19 time=18:08:46 logid="0111046409" type="event" subtype="fortiextender"
level="information" vd="root" eventtime=1550628524 logdesc="Remote FortiExtender info
activity" sn="FX04DN4N16002352" ip=11.11.11.2 action="Cellular Signal Statistics"
imei="359376060442770" imsi="302720502331361" iccid="89302720403038146410"
phonenumber="+16045067526" carrier="Rogers" plan="Rogers-plan" service="LTE" sinr="7.0 dB"
rsrp="-89 dBm" rsrq="-16 dB" signalstrength="92 dBm" rssi="-54" temperature="40 C" apn="N/A"
msg="FX04DN4N16002352 INFO: LTE RSSI=-54dBm,RSRP=-89dBm,RSRQ=-
16dB,SINR=7.0dB,BAND=B2,CELLID=061C700F,BW=15MHz,RXCH=1025,TXCH=19025,TAC=8AAC,TEMPERATURE=4
0 C"
date=2019-02-19 time=18:09:46 logid="0111046409" type="event" subtype="fortiextender"
level="information" vd="root" eventtime=1550628585 logdesc="Remote FortiExtender info
activity" sn="FX04DN4N16002352" ip=11.11.11.2 action="Cellular Data Statistics"
imei="359376060442770" imsi="302720502331361" iccid="89302720403038146410"
phonenumber="+16045067526" carrier="Rogers" plan="Rogers-plan" service="LTE" rcvdbyte=7760
sentbyte=3315 msg="FX04DN4N16002352 INFO: SIM2 LTE, rx=7760, tx=3315, rx_diff=2538, tx_
diff=567"
Security Logs > Antivirus
Log configuration requirements
config antivirus profile
edit "test-av"
config http
set options scan
end
set av-virus-log enable
set av-block-log enable
next
end
FortiOS 6.4.2 Administration Guide 1704
Fortinet Inc.
Log and Report
config firewall policy
edit 1
set srcintf "port12"
set dstintf "port11"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set utm-status enable
set av-profile "test-av"
set logtraffic utm
set nat enable
next
end
Sample log
date=2019-05-13 time=11:45:03 logid="0211008192" type="utm" subtype="virus"
eventtype="infected" level="warning" vd="vdom1" eventtime=1557773103767393505 msg="File is
infected." action="blocked" service="HTTP" sessionid=359260 srcip=10.1.100.11
dstip=172.16.200.55 srcport=60446 dstport=80 srcintf="port12" srcintfrole="undefined"
dstintf="port11" dstintfrole="undefined" policyid=4 proto=6 direction="incoming"
filename="eicar.com" quarskip="File-was-not-quarantined." virus="EICAR_TEST_FILE"
dtype="Virus" ref="http://www.fortinet.com/ve?vn=EICAR_TEST_FILE" virusid=2172
url="http://172.16.200.55/virus/eicar.com" profile="g-default" agent="curl/7.47.0"
analyticscksum="275a021bbfb6489e54d471899f7db9d1663fc695ec2fe2a2c4538aabf651fd0f"
analyticssubmit="false" crscore=50 craction=2 crlevel="critical"
# Corresponding Traffic Log #
date=2019-05-13 time=11:45:04 logid="0000000013" type="traffic" subtype="forward"
level="notice" vd="vdom1" eventtime=1557773104815101919 srcip=10.1.100.11 srcport=60446
srcintf="port12" srcintfrole="undefined" dstip=172.16.200.55 dstport=80 dstintf="port11"
dstintfrole="undefined" srcuuid="48420c8a-5c88-51e9-0424-a37f9e74621e" dstuuid="187d6f46-
5c86-51e9-70a0-fadcfc349c3e" poluuid="3888b41a-5c88-51e9-cb32-1c32c66b4edf" sessionid=359260
proto=6 action="close" policyid=4 policytype="policy" service="HTTP" dstcountry="Reserved"
srccountry="Reserved" trandisp="snat" transip=172.16.200.2 transport=60446 appid=15893
app="HTTP.BROWSER" appcat="Web.Client" apprisk="medium" applist="g-default" duration=1
sentbyte=412 rcvdbyte=2286 sentpkt=6 rcvdpkt=6 wanin=313 wanout=92 lanin=92 lanout=92
utmaction="block" countav=1 countapp=1 crscore=50 craction=2 osname="Ubuntu"
mastersrcmac="a2:e9:00:ec:40:01" srcmac="a2:e9:00:ec:40:01" srcserver=0 utmref=65497-770
Security Logs > Web Filter
Log configuration requirements
config webfilter profile
edit "test-webfilter"
set web-content-log enable
set web-filter-activex-log enable
set web-filter-command-block-log enable
set web-filter-cookie-log enable
set web-filter-applet-log enable
set web-filter-jscript-log enable
set web-filter-js-log enable
FortiOS 6.4.2 Administration Guide 1705
Fortinet Inc.
Log and Report
set web-filter-vbs-log enable
set web-filter-unknown-log enable
set web-filter-referer-log enable
set web-filter-cookie-removal-log enable
set web-url-log enable
set web-invalid-domain-log enable
set web-ftgd-err-log enable
set web-ftgd-quota-usage enable
next
end
config firewall policy
edit 1
set name "v4-out"
set srcintf "port12"
set dstintf "port11"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set logtraffic utm
set utm-status enable
set webfilter-profile "test-webfilter"
set nat enable
next
end
Sample log
date=2019-05-13 time=16:29:45 logid="0316013056" type="utm" subtype="webfilter"
eventtype="ftgd_blk" level="warning" vd="vdom1" eventtime=1557790184975119738 policyid=1
sessionid=381780 srcip=10.1.100.11 srcport=44258 srcintf="port12" srcintfrole="undefined"
dstip=185.244.31.158 dstport=80 dstintf="port11" dstintfrole="undefined" proto=6
service="HTTP" hostname="morrishittu.ddns.net" profile="test-webfilter" action="blocked"
reqtype="direct" url="/" sentbyte=84 rcvdbyte=0 direction="outgoing" msg="URL belongs to a
denied category in policy" method="domain" cat=26 catdesc="Malicious Websites" crscore=30
craction=4194304 crlevel="high"
# Corresponding traffic log #
date=2019-05-13 time=16:29:50 logid="0000000013" type="traffic" subtype="forward"
level="notice" vd="vdom1" eventtime=1557790190452146185 srcip=10.1.100.11 srcport=44258
srcintf="port12" srcintfrole="undefined" dstip=185.244.31.158 dstport=80 dstintf="port11"
dstintfrole="undefined" srcuuid="ae28f494-5735-51e9-f247-d1d2ce663f4b" dstuuid="ae28f494-
5735-51e9-f247-d1d2ce663f4b" poluuid="ccb269e0-5735-51e9-a218-a397dd08b7eb" sessionid=381780
proto=6 action="close" policyid=1 policytype="policy" service="HTTP" dstcountry="Germany"
srccountry="Reserved" trandisp="snat" transip=172.16.200.2 transport=44258 duration=5
sentbyte=736 rcvdbyte=3138 sentpkt=14 rcvdpkt=5 appcat="unscanned" utmaction="block"
countweb=1 crscore=30 craction=4194304 osname="Ubuntu" mastersrcmac="a2:e9:00:ec:40:01"
srcmac="a2:e9:00:ec:40:01" srcserver=0 utmref=65497-796
FortiOS 6.4.2 Administration Guide 1706
Fortinet Inc.
Log and Report
Security Logs > DNS Query
Log configuration requirements
config dnsfilter profile
edit "dnsfilter_fgd"
config ftgd-dns
set options error-allow
end
set log-all-domain enable
set block-botnet enable
next
end
config firewall policy
edit 1
set srcintf "port12"
set dstintf "port11"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set utm-status enable
set dnsfilter-profile "dnsfilter_fgd"
set logtraffic utm
set nat enable
next
end
Sample log
date=2019-05-15 time=15:05:49 logid="1501054802" type="utm" subtype="dns" eventtype="dns-
response" level="notice" vd="vdom1" eventtime=1557957949740931155 policyid=1 sessionid=6887
srcip=10.1.100.22 srcport=50002 srcintf="port12" srcintfrole="undefined"
dstip=172.16.100.100 dstport=53 dstintf="port11" dstintfrole="undefined" proto=17
profile="dnsfilter_fgd" srcmac="a2:e9:00:ec:40:41" xid=57945 qname="changelogs.ubuntu.com"
qtype="AAAA" qtypeval=28 qclass="IN" ipaddr="2001:67c:1560:8008::11" msg="Domain is
monitored" action="pass" cat=52 catdesc="Information Technology"
date=2019-05-15 time=15:05:49 logid="1500054000" type="utm" subtype="dns" eventtype="dns-
query" level="information" vd="vdom1" eventtime=1557957949653103543 policyid=1
sessionid=6887 srcip=10.1.100.22 srcport=50002 srcintf="port12" srcintfrole="undefined"
dstip=172.16.100.100 dstport=53 dstintf="port11" dstintfrole="undefined" proto=17
profile="dnsfilter_fgd" srcmac="a2:e9:00:ec:40:41" xid=57945 qname="changelogs.ubuntu.com"
qtype="AAAA" qtypeval=28 qclass="IN"
# Corresponding traffic log #
date=2019-05-15 time=15:08:49 logid="0000000013" type="traffic" subtype="forward"
level="notice" vd="vdom1" eventtime=1557958129950003945 srcip=10.1.100.22 srcport=50002
srcintf="port12" srcintfrole="undefined" dstip=172.16.100.100 dstport=53 dstintf="port11"
dstintfrole="undefined" srcuuid="ae28f494-5735-51e9-f247-d1d2ce663f4b" dstuuid="ae28f494-
5735-51e9-f247-d1d2ce663f4b" poluuid="ccb269e0-5735-51e9-a218-a397dd08b7eb" sessionid=6887
proto=17 action="accept" policyid=1 policytype="policy" service="DNS" dstcountry="Reserved"
srccountry="Reserved" trandisp="snat" transip=172.16.200.2 transport=50002 duration=180
sentbyte=67 rcvdbyte=207 sentpkt=1 rcvdpkt=1 appcat="unscanned" utmaction="allow" countdns=1
FortiOS 6.4.2 Administration Guide 1707
Fortinet Inc.
Log and Report
osname="Linux" mastersrcmac="a2:e9:00:ec:40:41" srcmac="a2:e9:00:ec:40:41" srcserver=0
utmref=65495-306
Security Logs > Application Control
Log configuration requirements
# log enabled by default in application profile entry
config application list
edit "block-social.media"
set other-application-log enable
config entries
edit 1
set category 2 5 6 23
set log enable
next
end
next
end
config firewall policy
edit 1
set name "to_Internet"
set srcintf "port10"
set dstintf "port9"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set utm-status enable
set logtraffic utm
set application-list "block-social.media"
set ssl-ssh-profile "deep-inspection"
set nat enable
next
end
Sample log
date=2019-05-15 time=18:03:36 logid="1059028704" type="utm" subtype="app-ctrl"
eventtype="app-ctrl-all" level="information" vd="root" eventtime=1557968615 appid=40568
srcip=10.1.100.22 dstip=195.8.215.136 srcport=50798 dstport=443 srcintf="port10"
srcintfrole="lan" dstintf="port9" dstintfrole="wan" proto=6 service="HTTPS"
direction="outgoing" policyid=1 sessionid=4414 applist="block-social.media"
appcat="Web.Client" app="HTTPS.BROWSER" action="pass" hostname="www.dailymotion.com"
incidentserialno=1962906680 url="/" msg="Web.Client: HTTPS.BROWSER," apprisk="medium"
scertcname="*.dailymotion.com" scertissuer="DigiCert SHA2 High Assurance Server CA"
date=2019-05-15 time=18:03:35 logid="1059028705" type="utm" subtype="app-ctrl"
eventtype="app-ctrl-all" level="warning" vd="root" eventtime=1557968615 appid=16072
srcip=10.1.100.22 dstip=195.8.215.136 srcport=50798 dstport=443 srcintf="port10"
srcintfrole="lan" dstintf="port9" dstintfrole="wan" proto=6 service="HTTPS"
direction="incoming" policyid=1 sessionid=4414 applist="block-social.media"
FortiOS 6.4.2 Administration Guide 1708
Fortinet Inc.
Log and Report
appcat="Video/Audio" app="Dailymotion" action="block" hostname="www.dailymotion.com"
incidentserialno=1962906682 url="/" msg="Video/Audio: Dailymotion," apprisk="elevated"
date=2019-05-15 time=18:03:35 logid="1059028705" type="utm" subtype="app-ctrl"
eventtype="app-ctrl-all" level="warning" vd="root" eventtime=1557968615 appid=16072
srcip=10.1.100.22 dstip=195.8.215.136 srcport=50798 dstport=443 srcintf="port10"
srcintfrole="lan" dstintf="port9" dstintfrole="wan" proto=6 service="HTTPS"
direction="incoming" policyid=1 sessionid=4414 applist="block-social.media"
appcat="Video/Audio" app="Dailymotion" action="block" hostname="www.dailymotion.com"
incidentserialno=1962906681 url="/" msg="Video/Audio: Dailymotion," apprisk="elevated"
# Corresponding Traffic Log # date=2019-05-15 time=18:03:41 logid="0000000013"
type="traffic" subtype="forward" level="notice" vd="root" eventtime=1557968619
srcip=10.1.100.22 srcport=50798 srcintf="port10" srcintfrole="lan" dstip=195.8.215.136
dstport=443 dstintf="port9" dstintfrole="wan" poluuid="d8ce7a90-7763-51e9-e2be-741294c96f31"
sessionid=4414 proto=6 action="client-rst" policyid=1 policytype="policy" service="HTTPS"
dstcountry="France" srccountry="Reserved" trandisp="snat" transip=172.16.200.10
transport=50798 appid=16072 app="Dailymotion" appcat="Video/Audio" apprisk="elevated"
applist="block-social.media" appact="drop-session" duration=5 sentbyte=1150 rcvdbyte=7039
sentpkt=13 utmaction="block" countapp=3 devtype="Unknown" devcategory="None"
mastersrcmac="00:0c:29:51:38:5e" srcmac="00:0c:29:51:38:5e" srcserver=0 utmref=0-330
Security Logs > Intrusion Prevention
Log configuration requirements
# log enabled by default in ips sensor
config ips sensor
edit "block-critical-ips"
config entries
edit 1
set severity critical
set status enable
set action block
set log enable
next
end
next
end
config firewall policy
edit 1
set name "to_Internet"
set srcintf "port10"
set dstintf "port9"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set utm-status enable
set logtraffic utm
set ips-sensor "block-critical-ips"
set nat enable
FortiOS 6.4.2 Administration Guide 1709
Fortinet Inc.
Log and Report
next
end
Sample log
date=2019-05-15 time=17:56:41 logid="0419016384" type="utm" subtype="ips"
eventtype="signature" level="alert" vd="root" eventtime=1557968201 severity="critical"
srcip=10.1.100.22 srccountry="Reserved" dstip=172.16.200.55 srcintf="port10"
srcintfrole="lan" dstintf="port9" dstintfrole="wan" sessionid=4017 action="dropped" proto=6
service="HTTP" policyid=1 attack="Adobe.Flash.newfunction.Handling.Code.Execution"
srcport=46810 dstport=80 hostname="172.16.200.55" url="/ips/sig1.pdf" direction="incoming"
attackid=23305 profile="block-critical-ips" ref="http://www.fortinet.com/ids/VID23305"
incidentserialno=582633933 msg="applications3:
Adobe.Flash.newfunction.Handling.Code.Execution," crscore=50 craction=4096
crlevel="critical"
# Corresponding Traffic Log # date=2019-05-15 time=17:58:10 logid="0000000013"
type="traffic" subtype="forward" level="notice" vd="root" eventtime=1557968289
srcip=10.1.100.22 srcport=46810 srcintf="port10" srcintfrole="lan" dstip=172.16.200.55
dstport=80 dstintf="port9" dstintfrole="wan" poluuid="d8ce7a90-7763-51e9-e2be-741294c96f31"
sessionid=4017 proto=6 action="close" policyid=1 policytype="policy" service="HTTP"
dstcountry="Reserved" srccountry="Reserved" trandisp="snat" transip=172.16.200.10
transport=46810 duration=89 sentbyte=565 rcvdbyte=9112 sentpkt=9 rcvdpkt=8
appcat="unscanned" utmaction="block" countips=1 crscore=50 craction=4096 devtype="Unknown"
devcategory="None" mastersrcmac="00:0c:29:51:38:5e" srcmac="00:0c:29:51:38:5e" srcserver=0
utmref=0-302
Security Logs > Anomaly
Log configuration requirements
config firewall DoS-policy
edit 1
set interface "port12"
set srcaddr "all"
set dstaddr "all"
set service "ALL"
config anomaly
edit "icmp_flood"
set status enable
set log enable
set action block
set threshold 50
next
end
next
end
Sample log
date=2019-05-13 time=17:05:59 logid="0720018433" type="utm" subtype="anomaly"
eventtype="anomaly" level="alert" vd="vdom1" eventtime=1557792359461869329
severity="critical" srcip=10.1.100.11 srccountry="Reserved" dstip=172.16.200.55
srcintf="port12" srcintfrole="undefined" sessionid=0 action="clear_session" proto=1
service="PING" count=1 attack="icmp_flood" icmpid="0x1474" icmptype="0x08" icmpcode="0x00"
FortiOS 6.4.2 Administration Guide 1710
Fortinet Inc.
Log and Report
attackid=16777316 policyid=1 policytype="DoS-policy"
ref="http://www.fortinet.com/ids/VID16777316" msg="anomaly: icmp_flood, 51 > threshold 50"
crscore=50 craction=4096 crlevel="critical"
Security Logs > Data Leak Prevention
Log configuration requirements
config dlp sensor
edit "dlp-file-type-test"
set comment ''
set replacemsg-group ''
config filter
edit 1
set name ''
set severity medium
set type file
set proto http-get http-post ftp
set filter-by file-type
set file-type 1
set archive enable
set action block
next
end
set dlp-log enable
next
end
config firewall policy
edit 1
set name "to_Internet"
set srcintf "port10"
set dstintf "port9"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set utm-status enable
set inspection-mode proxy
set logtraffic utm
set dlp-sensor "dlp-file-type-test"
set ssl-ssh-profile "deep-inspection"
set nat enable
next
end
Sample log
date=2019-05-15 time=17:45:30 logid="0954024576" type="utm" subtype="dlp" eventtype="dlp"
level="warning" vd="root" eventtime=1557967528 filteridx=1 dlpextra="dlp-file-size11"
filtertype="file-type" filtercat="file" severity="medium" policyid=1 sessionid=3423
epoch=1740880646 eventid=0 srcip=10.1.100.22 srcport=50354 srcintf="port10"
srcintfrole="lan" dstip=52.216.177.83 dstport=443 dstintf="port9" dstintfrole="wan" proto=6
service="HTTPS" filetype="pdf" direction="incoming" action="block"
FortiOS 6.4.2 Administration Guide 1711
Fortinet Inc.
Log and Report
hostname="fortinetweb.s3.amazonaws.com" url="/docs.fortinet.com/v2/attachments/be3d0e3d-
4b62-11e9-94bf-00505692583a/FortiOS_6.2.0_Log_Reference.pdf" agent="Wget/1.17.1"
filename="FortiOS_6.2.0_Log_Reference.pdf" filesize=16360 profile="dlp-file-type-test"
# Corresponding Traffic Log #
date=2019-05-15 time=17:45:34 logid="0000000013" type="traffic" subtype="forward"
level="notice" vd="root" eventtime=1557967534 srcip=10.1.100.22 srcport=50354
srcintf="port10" srcintfrole="lan" dstip=52.216.177.83 dstport=443 dstintf="port9"
dstintfrole="wan" poluuid="d8ce7a90-7763-51e9-e2be-741294c96f31" sessionid=3423 proto=6
action="server-rst" policyid=1 policytype="policy" service="HTTPS" dstcountry="United
States" srccountry="Reserved" trandisp="snat" transip=172.16.200.10 transport=50354
duration=5 sentbyte=2314 rcvdbyte=5266 sentpkt=33 rcvdpkt=12 appcat="unscanned" wanin=43936
wanout=710 lanin=753 lanout=753 utmaction="block" countdlp=1 crscore=5 craction=262144
crlevel="low" devtype="Unknown" devcategory="None" mastersrcmac="00:0c:29:51:38:5e"
srcmac="00:0c:29:51:38:5e" srcserver=0 utmref=0-152
Security Logs > SSH and Security Logs > SSL
Log configuration requirements
config ssh-filter profile
edit "ssh-deepscan"
set block shell
set log shell
set default-command-log disable
next
end
config firewall policy
edit 1
set srcintf "port21"
set dstintf "port23"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ALL"
set utm-status enable
set inspection-mode proxy
set ssh-filter-profile "ssh-deepscan"
set profile-protocol-options "protocol"
set ssl-ssh-profile "ssl"
set nat enable
next
end
For SSL-Traffic-log, enable logtraffic all
config firewall policy
edit 1
set srcintf "dmz"
set dstintf "wan1"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
FortiOS 6.4.2 Administration Guide 1712
Fortinet Inc.
Log and Report
set service "ALL"
set utm-status enable
set inspection-mode proxy
set logtraffic all
set ssl-ssh-profile "deep-inspection"
set nat enable
next
end
For SSL-UTM-log
#EVENTTYPE="SSL-ANOMALIES"
By default, ssl-anomalies-log is enabled.
config firewall ssl-ssh-profile
edit "deep-inspection"
set comment "Read-only deep inspection profile."
set server-cert-mode re-sign
set caname "Fortinet_CA_SSL"
set untrusted-caname "Fortinet_CA_Untrusted"
set ssl-anomalies-log enable
set ssl-exemptions-log disable
set ssl-negotiation-log disable
set rpc-over-https disable
set mapi-over-https disable
set use-ssl-server disable
next
end
# EVENTTYPE="SSL-EXEMPT"
Enable ssl-exemptions-log to generate ssl-utm-exempt log.
config firewall ssl-ssh-profile
edit "deep-inspection"
set comment "Read-only deep inspection profile."
set server-cert-mode re-sign
set caname "Fortinet_CA_SSL"
set untrusted-caname "Fortinet_CA_Untrusted"
set ssl-anomalies-log enable
set ssl-exemptions-log enable
set ssl-negotiation-log disable
set rpc-over-https disable
set mapi-over-https disable
set use-ssl-server disable
next
end
# EVENTTYPE="SSL-negotiation"
Enable ssl-negotiation-log to log SSL negotiation..
config firewall ssl-ssh-profile
edit "deep-inspection"
set comment "Read-only deep inspection profile."
set server-cert-mode re-sign
set caname "Fortinet_CA_SSL"
set untrusted-caname "Fortinet_CA_Untrusted"
FortiOS 6.4.2 Administration Guide 1713
Fortinet Inc.
Log and Report
set ssl-anomalies-log enable
set ssl-exemptions-log enable
set ssl-negotiation-log enable
set rpc-over-https disable
set mapi-over-https disable
set use-ssl-server disable
next
end
Sample log for SSH
date=2019-05-15 time=16:18:17 logid="1601061010" type="utm" subtype="ssh" eventtype="ssh-
channel" level="warning" vd="vdom1" eventtime=1557962296 policyid=1 sessionid=344
profile="ssh-deepscan" srcip=10.1.100.11 srcport=43580 dstip=172.16.200.44 dstport=22
srcintf="port21" srcintfrole="undefined" dstintf="port23" dstintfrole="undefined" proto=6
action="blocked" direction="outgoing" login="root" channeltype="shell"
# Corresponding Traffic Log #
date=2019-05-15 time=16:18:18 logid="0000000013" type="traffic" subtype="forward"
level="notice" vd="vdom1" eventtime=1557962298 srcip=10.1.100.11 srcport=43580
srcintf="port21" srcintfrole="undefined" dstip=172.16.200.44 dstport=22 dstintf="port23"
dstintfrole="undefined" poluuid="49871fae-7371-51e9-17b4-43c7ff119195" sessionid=344 proto=6
action="close" policyid=1 policytype="policy" service="SSH" dstcountry="Reserved"
srccountry="Reserved" trandisp="snat" transip=172.16.200.171 transport=43580 duration=8
sentbyte=3093 rcvdbyte=2973 sentpkt=18 rcvdpkt=16 appcat="unscanned" utmaction="block"
countssh=1 utmref=65535-0
Sample log for SSL
For SSL-Traffic-log
date=2019-05-16 time=10:08:26 logid="0000000013" type="traffic" subtype="forward"
level="notice" vd="root" eventtime=1558026506763925658 srcip=10.1.100.66 srcport=38572
srcintf="dmz" srcintfrole="dmz" dstip=104.154.89.105 dstport=443 dstintf="wan1"
dstintfrole="wan" poluuid="a17c0a38-75c6-51e9-4c0d-d547347b63e5" sessionid=100 proto=6
action="server-rst" policyid=1 policytype="policy" service="HTTPS" dstcountry="United
States" srccountry="Reserved" trandisp="snat" transip=172.16.200.11 transport=38572
duration=5 sentbyte=930 rcvdbyte=6832 sentpkt=11 rcvdpkt=19 appcat="unscanned" wanin=1779
wanout=350 lanin=754 lanout=754 utmaction="block" countssl=1 crscore=5 craction=262144
crlevel="low" utmref=65467-0
For SSL-UTM-log
#EVENTTYPE="SSL-ANOMALIES"
date=2019-03-28 time=10:44:53 logid="1700062002" type="utm" subtype="ssl" eventtype="ssl-
anomalies" level="warning" vd="vdom1" eventtime=1553795092 policyid=1 sessionid=10796
service="HTTPS" srcip=10.1.100.66 srcport=43602 dstip=104.154.89.105 dstport=443
srcintf="port2" srcintfrole="undefined" dstintf="port3" dstintfrole="undefined" proto=6
action="blocked" msg="Server certificate blocked" reason="block-cert-invalid"
date=2019-03-28 time=10:51:17 logid="1700062002" type="utm" subtype="ssl" eventtype="ssl-
anomalies" level="warning" vd="vdom1" eventtime=1553795476 policyid=1 sessionid=11110
service="HTTPS" srcip=10.1.100.66 srcport=49076 dstip=172.16.200.99 dstport=443
srcintf="port2" srcintfrole="undefined" dstintf="port3" dstintfrole="undefined" proto=6
action="blocked" msg="Server certificate blocked" reason="block-cert-untrusted"
FortiOS 6.4.2 Administration Guide 1714
Fortinet Inc.
Log and Report
date=2019-03-28 time=10:55:43 logid="1700062002" type="utm" subtype="ssl" eventtype="ssl-
anomalies" level="warning" vd="vdom1" eventtime=1553795742 policyid=1 sessionid=11334
service="HTTPS" srcip=10.1.100.66 srcport=49082 dstip=172.16.200.99 dstport=443
srcintf="port2" srcintfrole="undefined" dstintf="port3" dstintfrole="undefined" proto=6
action="blocked" msg="Server certificate blocked" reason="block-cert-req"
date=2019-03-28 time=10:57:42 logid="1700062053" type="utm" subtype="ssl" eventtype="ssl-
anomalies" level="warning" vd="vdom1" eventtime=1553795861 policyid=1 sessionid=11424
service="SMTPS" profile="block-unsupported-ssl" srcip=10.1.100.66 srcport=41296
dstip=172.16.200.99 dstport=8080 srcintf="port2" srcintfrole="undefined" dstintf=unknown-0
dstintfrole="undefined" proto=6 action="blocked" msg="Connection is blocked due to
unsupported SSL traffic" reason="malformed input"
date=2019-03-28 time=11:00:17 logid="1700062002" type="utm" subtype="ssl" eventtype="ssl-
anomalies" level="warning" vd="vdom1" eventtime=1553796016 policyid=1 sessionid=11554
service="HTTPS" srcip=10.1.100.66 srcport=49088 dstip=172.16.200.99 dstport=443
srcintf="port2" srcintfrole="undefined" dstintf="port3" dstintfrole="undefined" proto=6
action="blocked" msg="Server certificate blocked" reason="block-cert-sni-mismatch"
# EVENTTYPE="SSL-EXEMPT"
date=2019-03-28 time=11:09:14 logid="1701062003" type="utm" subtype="ssl" eventtype="ssl-
exempt" level="notice" vd="vdom1" eventtime=1553796553 policyid=1 sessionid=12079
service="HTTPS" srcip=10.1.100.66 srcport=49102 dstip=172.16.200.99 dstport=443
srcintf="port2" srcintfrole="undefined" dstintf="port3" dstintfrole="undefined" proto=6
action="exempt" msg="SSL connection exempted" reason="exempt-addr"
date=2019-03-28 time=11:10:55 logid="1701062003" type="utm" subtype="ssl" eventtype="ssl-
exempt" level="notice" vd="vdom1" eventtime=1553796654 policyid=1 sessionid=12171
service="HTTPS" srcip=10.1.100.66 srcport=47390 dstip=50.18.221.132 dstport=443
srcintf="port2" srcintfrole="undefined" dstintf="port3" dstintfrole="undefined" proto=6
action="exempt" msg="SSL connection exempted" reason="exempt-ftgd-cat"
# EVENTYPE="SSL-NEGOTIATION"
date=2020-02-07 time=11:10:58 logid="1702062101" type="utm" subtype="ssl" eventtype="ssl-
negotiation" level="warning" vd="vdom1" eventtime=1581102658589415731 tz="-0800"
action="blocked" policyid=1 sessionid=141224 service="HTTPS" profile="deep-inspection-clone"
srcip=10.1.100.66 srcport=33666 dstip=172.16.200.99 dstport=8080 srcintf="port2"
srcintfrole="undefined" dstintf="port3" dstintfrole="undefined" proto=6
eventsubtype="unexpected-protocol" msg="SSL connection is blocked."
Log buffer on FortiGates with an SSD disk
FortiGates with an SSD disk have a configurable log buffer. When the connection to FortiAnalyzer is unreachable, the
FortiGate is able to buffer logs on disk if the memory log buffer is full. The logs queued on the disk buffer can be sent
successfully once the connection to FortiAnalyzer is restored.
The number of logs queued on the disk buffer is visible in the Log & Report > Log Settings page:
FortiOS 6.4.2 Administration Guide 1715
Fortinet Inc.
Log and Report
The queued logs are buffered to the memory first and then disk. Main miglogd handles the disk buffering job, while
miglogd-children handles the memory buffering. Disk buffer statistics only appear under Main miglogd, and
memory buffer statistics only appears under miglogd-children. If the total buffer is full, new logs will overwrite the old
logs.
To configure the log buffer:
1. Allocate disk space (MB) to temporarily store logs to FortiAnalyzer:
config system global
set faz-disk-buffer-size 200
end
2. Check the Main miglogd and miglogd-children statistics. The 200 MB disk buffer has been set, and there
are currently no logs buffered in memory or on disk when FortiAnalyzer is reachable:
# diagnose test application miglogd 41 0
cache maximum: 106100940(101MB) objects: 0 used: 0(0MB) allocated: 0(0MB)
VDOM:root
Queue for: global-faz
memory queue:
num:0 size:0(0MB) max:101906636(97MB) logs:0
disk max queue size:200MB total:0MB
totol items:0
disk queue agents:
devid:-1-10-0-1
buffer path:/var/log/qbuf/10.0/1
saved size:0MB cached size:0
save roll:0 restore roll:0
restore id:0 space:0MB
# diagnose test application miglogd 41 1
cache maximum: 106100940(101MB) objects: 0 used: 0(0MB) allocated: 0(0MB)
VDOM:root
Queue for: global-faz
memory queue:
num:0 size:0(0MB) max:101906636(97MB) logs:0
disk queue client:
FortiOS 6.4.2 Administration Guide 1716
Fortinet Inc.
Log and Report
devid:-1-10-0-1 status:buffering
Total in cache:0 size:0(0MB) max:4MB logs:0
3. Disable the connection between the FortiGate and FortiAnalyzer. For example, delete the FortiGate from the
FortiAnalyzer authorized device list.
Assuming a massive number of logs (~ 300000) are recorded during this downtime, the logs will be queued in the
memory buffer first. If the memory buffer is full, then the remaining logs will be queued on the disk buffer.
4. Check the Main miglogd and miglogd-children statistics again. All 97 MB of the memory buffer is occupied,
and 76 of the 200 MB has been taken from the disk buffer:
# diagnose test application miglogd 41 0
cache maximum: 106100940(101MB) objects: 0 used: 0(0MB) allocated: 0(0MB)
VDOM:root
Queue for: global-faz
memory queue:
num:0 size:0(0MB) max:101906636(97MB) logs:0
disk max queue size:200MB total:76MB
totol items:128917
disk queue agents:
devid:-1-10-0-1
buffer path:/var/log/qbuf/10.0/1
saved size:76MB cached size:3324984
save roll:19 restore roll:0
restore id:0 space:0MB
# diagnose test application miglogd 41 1
cache maximum: 106100940(101MB) objects: 165721 used: 101908358(97MB) allocated:
106449280(101MB)
VDOM:root
Queue for: global-faz
memory queue:
num:165718 size:101906500(97MB) max:101906636(97MB) logs:165718
disk queue client:
devid:-1-10-0-1 status:restoring
restore id:1267 space:0MB
Total in cache:3 size:1858(0MB) max:4MB logs:3
The overall miglogd statistics shows the total cached logs is the sum of the logs buffered in memory and on disk:
# diagnose test application miglogd 6
mem=0, disk=11, alert=0, alarm=0, sys=0, faz=300053, faz-cloud=0, webt=0, fds=0
interface-missed=44
Queues in all miglogds: cur:165718 total-so-far:165718
global log dev statistics:
faz 0: sent=0, failed=0, cached=300053, dropped=0 , relayed=0
Num of REST URLs: 0
5. Enable the connection between FortiAnalyzer and the FortiGate.
6. After a while, check the miglogd statistics to confirm that all buffered logs are being sent to FortiAnalyzer
successfully:
# diagnose test application miglogd 6
mem=0, disk=11, alert=0, alarm=0, sys=0, faz=300058, faz-cloud=0, webt=0, fds=0
FortiOS 6.4.2 Administration Guide 1717
Fortinet Inc.
Log and Report
interface-missed=44
Queues in all miglogds: cur:4294832957 total-so-far:165726
global log dev statistics:
faz 0: sent=300058, failed=0, cached=0, dropped=0 , relayed=0
Num of REST URLs: 15
# diagnose test application miglogd 41 0
cache maximum: 106100940(101MB) objects: 0 used: 0(0MB) allocated: 0(0MB)
VDOM:root
Queue for: global-faz
memory queue:
num:0 size:0(0MB) max:101906636(97MB) logs:0
disk max queue size:200MB total:0MB
totol items:0
disk queue agents:
devid:-1-10-0-1
buffer path:/var/log/qbuf/10.0/1
saved size:0MB cached size:0
save roll:20 restore roll:20
restore id:1267 space:0MB
# diagnose test application miglogd 41 1
cache maximum: 106100940(101MB) objects: 0 used: 0(0MB) allocated: 0(0MB)
VDOM:root
Queue for: global-faz
memory queue:
num:0 size:0(0MB) max:101906636(97MB) logs:0
disk queue client:
devid:-1-10-0-1 status:buffering
Total in cache:0 size:0(0MB) max:4MB logs:0
Checking the email filter log
To check the email filter log in the CLI:
execute log filter category 5
execute log display
1 logs found.
1 logs returned.
1: date=2019-04-09 time=03:41:18 logid="0510020491" type="utm" subtype="emailfilter"
eventtype="imap" level="notice" vd="vdom1" eventtime=1554806478647415130 policyid=1
sessionid=439 srcip=10.1.100.22 srcport=39937 srcintf="port21" srcintfrole="undefined"
dstip=172.16.200.45 dstport=143 dstintf="port17" dstintfrole="undefined" proto=6
service="IMAPS" profile="822881" action="blocked" from="[email protected]"
to="[email protected]" recipient="testpc3" direction="incoming" msg="from ip is in ip
blacklist.(path black ip 172.16.200.9)" subject="testcase822881" size="525" attachment="no"
FortiOS 6.4.2 Administration Guide 1718
Fortinet Inc.
Log and Report
To check the email filter log in the GUI:
1. Go to Log & Report > Anti-Spam.
Supported log types to FortiAnalyzer, syslog, and FortiAnalyzer
Cloud
This topic describes which log messages are supported by each logging destination:
Log Type FortiAnalyzer Syslog FortiAnalyzer Cloud
Traffic Yes Yes No
Event Yes Yes Yes
Virus Yes Yes No
Webfilter Yes Yes No
IPS Yes Yes No
Emailfilter Yes Yes No
Anomaly Yes Yes No
VOIP Yes Yes No
DLP Yes Yes No
App-Ctrl Yes Yes No
WAF Yes Yes No
GTP Yes Yes No
DNS Yes Yes No
FortiOS 6.4.2 Administration Guide 1719
Fortinet Inc.
Log and Report
Log Type FortiAnalyzer Syslog FortiAnalyzer Cloud
SSH Yes Yes No
SSL Yes Yes No
CIFS No Yes No
Configuring multiple FortiAnalyzers on a multi-VDOM FortiGate
This topic shows a sample configuration of multiple FortiAnalyzers on a multi-VDOM FortiGate.
In this example:
l The FortiGate has three VDOMs:
l Root (management VDOM)
l VDOM1
l VDOM2
l There are four FortiAnalyzers.
These IP addresses are used as examples in the instructions below.
l FAZ1: 172.16.200.55
l FAZ2: 172.18.60.25
l FAZ3: 192.168.1.253
l FAZ4: 192.168.1.254
l Set up FAZ1 and FAZ2 under global.
l These two collect logs from the root VDOM and VDOM2.
l FAZ1 and FAZ2 must be accessible from management VDOM root.
l Set up FAZ3 and FAZ4 under VDOM1.
l These two collect logs from VDOM1.
l FAZ3 and FAZ4 must be accessible from VDOM1.
To set up FAZ1 as global FortiAnalyzer 1 from the GUI:
Prerequisite: FAZ1 must be reachable from the management root VDOM.
1. Go to Global > Log & Report > Log Settings.
2. Enable Send logs to FortiAnalyzer/FortiManager.
3. Enter the FortiAnalyzer IP.
In this example: 172.16.200.55.
4. For Upload option, select Real Time.
5. Click Apply.
To set up FAZ2 as global FortiAnalyzer 2 from the CLI:
Prerequisite: FAZ2 must be reachable from the management root VDOM.
config log fortianalyzer2 setting
set status enable
FortiOS 6.4.2 Administration Guide 1720
Fortinet Inc.
Log and Report
set server "172.18.60.25"
set upload-option realtime
end
To set up FAZ3 and FAZ4 as VDOM1 FortiAnalyzer 1 and FortiAnalyzer 2:
Prerequisite: FAZ3 and FAZ4 must be reachable from VDOM1.
config log setting
set faz-override enable
end
config log fortianalyzer override-setting
set status enable
set server "192.168.1.253"
set upload-option realtime
end
config log fortianalyzer2 override-setting
set status enable
set server "192.168.1.254"
set upload-option realtime
end
Checking FortiAnalyzer connectivity
To use the diagnose command to check FortiAnalyzer connectivity:
1. Check the global FortiAnalyzer status:
FGTA(global) # diagnose test application miglogd 1
faz: global , enabled
server=172.16.200.55, realtime=3, ssl=1, state=connected, src=, mgmt_name=FGh_
Log_root_172.16.200.55, reliable=1
status: ver=6, used_disk=0, total_disk=0, global=0, vfid=0 conn_
verified=N
SNs: last sn update:1369 seconds ago.
Sn list:
queue: qlen=0.
filter: severity=6, sz_exclude_list=0
voip dns ssh ssl
subcategory:
traffic: forward local multicast sniffer
anomaly: anomaly
server: global, id=0, fd=90, ready=1, ipv6=0, 172.16.200.55/514
oftp-state=5
faz2: global , enabled
server=172.18.60.25, realtime=1, ssl=1, state=connected, src=, mgmt_name=FGh_
Log_root_172.18.60.25, reliable=0
status: ver=6, used_disk=0, total_disk=0, global=0, vfid=0 conn_
verified=N
SNs: last sn update:1369 seconds ago.
Sn list:
FortiOS 6.4.2 Administration Guide 1721
Fortinet Inc.
Log and Report
queue: qlen=0.
filter: severity=6, sz_exclude_list=0
voip dns ssh ssl
subcategory:
traffic: forward local multicast sniffer
anomaly: anomaly
server: global, id=1, fd=95, ready=1, ipv6=0, 172.18.60.25/514
oftp-state=5
2. Check the VDOM1 override FortiAnalyzer status:
FGTA(global) # diagnose test application miglogd 3101
faz: vdom, enabled, override
server=192.168.1.253, realtime=1, ssl=1, state=connected, src=, mgmt_name=FGh_
Log_root_192.168.1.253, reliable=1
status: ver=6, used_disk=0, total_disk=0, global=0, vfid=0 conn_
verified=N
SNs: last sn update:1369 seconds ago.
Sn list:
(FAZ-VM0000000001,age=17s)
queue: qlen=0.
filter: severity=6, sz_exclude_list=0
voip dns ssh ssl
subcategory:
traffic: forward local multicast sniffer
anomaly: anomaly
server: vdom, id=0, fd=72, ready=1, ipv6=0, 192.168.1.253/514
oftp-state=5
faz2: vdom, enabled, override
server=192.168.1.254, realtime=1, ssl=1, state=connected, src=, mgmt_name=FGh_
Log_root_192.168.1.254, reliable=0
status: ver=6, used_disk=0, total_disk=0, global=0, vfid=0 conn_
verified=N
SNs: last sn update:1369 seconds ago.
Sn list:
(FL-1KET318000008,age=17s)
queue: qlen=0.
filter: severity=6, sz_exclude_list=0
voip dns ssh ssl
subcategory:
traffic: forward local multicast sniffer
anomaly: anomaly
server: vdom, id=1, fd=97, ready=1, ipv6=0, 192.168.1.254/514
oftp-state=5
faz3: vdom, disabled, override
Configuring multiple FortiAnalyzers (or syslog servers) per VDOM
FortiOS 6.4.2 Administration Guide 1722
Fortinet Inc.
Log and Report
In a VDOM, multiple FortiAnalyzer and syslog servers can be configured as follows:
l Up to three override FortiAnalyzer servers
l Up to four override syslog servers
If the VDOM faz-override and/or syslog-override setting is enabled or disabled (default) before upgrading, the
setting remains the same after upgrading.
If the override setting is disabled, the GUI displays the global FortiAnalyzer1 or syslog1 setting. If the override setting is
enabled, the GUI displays the VDOM override FortiAnalyzer1 or syslog1 setting.
You can only use CLI to enable the override to support multiple log servers.
To enable FortiAnalyzer and syslog server override under VDOM:
config log setting
set faz-override enable
set syslog-override enable
end
When faz-override and/or syslog-override is enabled, the following CLI commands are available for configuring
VDOM override:
To configure VDOM override for FortiAnalyzer:
1. Configure the FortiAnalyzer override settings:
config log fortianalyzer/fortianalyzer2/fortianalyzer3 override-setting
set status enable
set server "123.12.123.123"
set reliable enable
end
2. Configure the override filters:
config log fortianalyzer/fortianalyzer2/fortianalyzer3 override-filter
set severity information
set forward-traffic enable
set local-traffic enable
set multicast-traffic enable
set sniffer-traffic enable
set anomaly enable
set voip enable
set dlp-archive enable
set dns enable
set ssh enable
set ssl enable
end
To configure VDOM override for a syslog server:
1. Configure the syslog override settings:
config log syslogd/syslogd2/syslogd3/syslogd4 override-setting
set status enable
set server "123.12.123.12"
set facility local1
end
FortiOS 6.4.2 Administration Guide 1723
Fortinet Inc.
Log and Report
2. Configure the override filters:
config log syslogd/syslogd2/syslogd3/syslogd4 override-filter
set severity information
set forward-traffic enable
set local-traffic enable
set multicast-traffic enable
set sniffer-traffic enable
set anomaly enable
set voip enable
set dns enable
set ssh enable
set ssl enable
end
Source and destination UUID logging
The log-uuid setting in system global is split into two settings: log-uuid-address and log-uuid policy.
The traffic log includes two internet-service name fields: Source Internet Service (srcinetsvc) and Destination
Internet Service (dstinetsvc).
Log UUIDs
UUIDs can be matched for each source and destination that match a policy that is added to the traffic log. This allows the
address objects to be referenced in log analysis and reporting.
As this may consume a significant amount of storage space, this feature is optional. By default, policy UUID insertion is
enabled and address UUID insertion is disabled.
To enable address and policy UUID insertion in traffic logs using the GUI:
1. Go to Log & Report > Log Settings.
2. Under UUIDs in Traffic Log, enable Policy and/or Address.
3. Click Apply.
FortiOS 6.4.2 Administration Guide 1724
Fortinet Inc.
Log and Report
To enable address and policy UUID insertion in traffic logs using the CLI:
config system global
set log-uuid-address enable
set log-uuid-policy enable
end
Sample forward traffic log:
# date=2019-01-25 time=11:32:55 logid="0000000013" type="traffic" subtype="forward"
level="notice" vd="vdom1" eventtime=1528223575 srcip=192.168.1.183 srcname="PC24"
srcport=33709 srcintf="lan" srcintfrole="lan" dstip=192.168.70.184 dstport=80
dstintf="wan1" dstintfrole="wan" srcuuid="27dd503e-883c-51e7-ade1-7e015d46494f"
dstuuid="27dd503e-883c-51e7-ade1-7e015d46494f"
poluuid="9e0fe24c-1808-51e8-1257-68ce4245572c" sessionid=5181 proto=6
action="client-rst" policyid=4 policytype="policy" service="HTTP" trandisp="snat"
transip=192.168.70.228 transport=33709 appid=38783 app="Wget"
appcat="General.Interest" apprisk="low" applist="default" duration=5 sentbyte=450
rcvdbyte=2305 sentpkt=6 wanin=368 wanout=130 lanin=130 lanout=130 utmaction="block"
countav=2 countapp=1 crscore=50 craction=2 devtype="Linux PC" devcategory="None"
osname="Linux" mastersrcmac="00:0c:29:36:5c:c3" srcmac="00:0c:29:36:5c:c3"
srcserver=0 utmref=65523-1018
Internet service name fields
Traffic logs for internet-service include two fields: Source Internet Service and Destination Internet Service.
To view the internet-service fields using the GUI:
1. Go to Log & Report > Forward Traffic.
2. Double-click on an entry to view the Log Details. The Source Internet Service and Destination Internet Service fields
are visible in the Log Details pane.
Sample internet-service name fields in a forward traffic log:
# date=2019-01-25 time=14:17:04 logid="0000000013" type="traffic" subtype="forward"
level="notice" vd="vdom1" eventtime=1548454622 srcip=10.1.100.11 srcport=51112
srcintf="port3" srcintfrole="undefined" dstip=172.217.14.228 dstport=80
dstintf="port1" dstintfrole="undefined" poluuid="af519380-2094-51e9-391c-
b78e8edbddfc" srcinetsvc="isdb-875099" dstinetsvc="Google.Gmail" sessionid=6930
FortiOS 6.4.2 Administration Guide 1725
Fortinet Inc.
Log and Report
proto=6 action="close" policyid=2 policytype="policy" service="HTTP"
dstcountry="United States" srccountry="Reserved" trandisp="snat"
transip=172.16.200.2 transport=51112 duration=11 sentbyte=398 rcvdbyte=756 sentpkt=6
rcvdpkt=4 appcat="unscanned" devtype="Router/NAT Device" devcategory="Fortinet
Device" mastersrcmac="90:6c:ac:41:7a:24" srcmac="90:6c:ac:41:7a:24" srcserver=0
dstdevtype="Unknown" dstdevcategory="Fortinet Device"
masterdstmac="08:5b:0e:1f:ed:ed" dstmac="08:5b:0e:1f:ed:ed" dstserver=0
Logging the signal-to-noise ratio and signal strength per client
The signal-to-noise ratio (snr) and signal strength (signal) are logged per client in the WiFi event and traffic logs.
When a WiFi client connects to a tunnel or local-bridge mode SSID on an FortiAP that is managed by a FortiGate, signal-
to-noise ratio and signal strength details are included in WiFi event logs for local-bridge traffic statistics and
authentication, and in forward traffic logs for tunnel traffic. This allows you to store and view clients' historical signal
strength and signal-to-noise ratio information.
To verify when a client is connecting to an SSID:
1. Go to Log & Report > Events and select WiFi Events from the events drop-down list.
The Signal and Signal/Noise columns show the signal strength and signal-to-noise ratio for each applicable client.
FortiOS 6.4.2 Administration Guide 1726
Fortinet Inc.
Log and Report
2. WiFi event log messages include the signal and snr values:
date=2020-05-27 time=11:26:28 logid="0104043579" type="event" subtype="wireless"
level="notice" vd="vdom1" eventtime=1590603988877156921 tz="-0700" logdesc="Wireless
client IP assigned" sn="FP231ETF20000455" ap="FP231ETF20000455" vap="stability3"
ssid="FOS_QA_Starr_140E_Guest-11" radioid=1 user="N/A" group="N/A"
stamac="1c:87:2c:b6:a8:49" srcip=11.10.80.2 channel=6 radioband="802.11n,g-only"
signal=-45 snr=50 security="WPA2 Personal" encryption="AES" action="client-ip-detected"
reason="Reserved 0" mpsk="N/A" msg="Client 1c:87:2c:b6:a8:49 had an IP address detected
(by DHCP packets)."
date=2020-05-27 time=11:26:11 logid="0104043573" type="event" subtype="wireless"
level="notice" vd="vdom1" eventtime=1590603970962702892 tz="-0700" logdesc="Wireless
client authenticated" sn="FP231ETF20000455" ap="FP231ETF20000455" vap="stability3"
ssid="FOS_QA_Starr_140E_Guest-11" radioid=1 user="N/A" group="N/A"
stamac="1c:87:2c:b6:a8:49" srcip=0.0.0.0 channel=6 radioband="802.11n,g-only" signal=-45
snr=50 security="WPA2 Personal" encryption="AES" action="client-authentication"
reason="Reserved 0" mpsk="N/A" msg="Client 1c:87:2c:b6:a8:49 authenticated."
To verify tunnel traffic when a client is connecting to a tunnel mode SSID:
1. Go to Log & Report > Forward Traffic.
The Signal and Signal/Noise columns show the signal strength and signal-to-noise ratio for each applicable client.
2. Forward traffic log messages include the signal and snr values:
date=2020-05-27 time=11:30:26 logid="0000000013" type="traffic" subtype="forward"
level="notice" vd="vdom1" eventtime=1590604226533016978 tz="-0700" srcip=11.10.80.2
srcname="WIFI23" srcport=53926 srcintf="stability3" srcintfrole="lan" srcssid="FOS_QA_
Starr_140E_Guest-11" apsn="FP231ETF20000455" ap="FP231ETF20000455" channel=6
radioband="802.11n,g-only" signal=-31 snr=64 dstip=91.189.91.157 dstport=123
dstintf="wan1" dstintfrole="wan" srccountry="United States" dstcountry="United States"
sessionid=322069 proto=17 action="accept" policyid=13 policytype="policy"
poluuid="7c14770c-1456-51e9-4c57-806e9c499782" policyname="wmm" service="NTP"
trandisp="snat" transip=172.16.200.111 transport=53926 appid=16270 app="NTP"
appcat="Network.Service" apprisk="elevated" applist="g-default" duration=180 sentbyte=76
rcvdbyte=76 sentpkt=1 rcvdpkt=1 utmaction="allow" countapp=1 osname="Linux"
mastersrcmac="1c:87:2c:b6:a8:49" srcmac="1c:87:2c:b6:a8:49" srcserver=0 utmref=65534-66
FortiOS 6.4.2 Administration Guide 1727
Fortinet Inc.
Log and Report
To verify local-bridge traffic statistics when a client is connecting to a local-bridge mode SSID:
1. Go to Log & Report > Events and select WiFi Events from the events drop-down list.
The Signal and Signal/Noise columns show the signal strength and signal-to-noise ratio for each applicable client.
2. WiFi event log messages include the signal and snr values:
date=2020-05-26 time=17:48:57 logid="0104043687" type="event" subtype="wireless"
level="information" vd="vdom1" eventtime=1590540537841497433 tz="-0700" logdesc="Traffic
stats for station with bridge wlan" sn="FP231ETF20000455" ap="FP231ETF20000455"
vap="wifi.fap.01" ssid="FOS_QA_Starr-140E-LB-cap-2" srcip=10.128.100.4 user="N/A"
stamac="00:1e:e5:df:b1:63" signal=-53 snr=52 sentbyte=8970016 rcvdbyte=985910
nextstat=300 action="sta-wl-bridge-traffic-stats" msg="Traffic stats for bridge ssid
client 00:1e:e5:df:b1:63"
RSSO information for authenticated destination users in logs
FortiGate can use RSSO accounting information from authenticated RSSO users to populate destination users and
groups, along with source users and groups.
RSSO user login information can be forwarded by the RADIUS server to the FortiGate that is listening for incoming
RADIUS accounting start messages on the RADIUS accounting port. Accounting start messages usually contain the
IP address, user name, and user group information. FortiGate uses this information in traffic logs, which include dstuser
and dstgroup fields for user and group destination information .
For instructions on configuring RSSO, see RADIUS single sign-on agent on page 290.
The three following scenarios show traffic between pc1 and the internet, and pc1 and pc2.
Scenario 1
In this scenario, RSSO user test2 in group rsso-grp1 is authenticated on pc1. Traffic flows from pc1 to the internet.
FortiOS 6.4.2 Administration Guide 1728
Fortinet Inc.
Log and Report
Expected result:
In the logs, user test2 is shown as the source user in the rsso-grp1 group.
To verify the results:
1. In the GUI, go to Log & Report > Forward Traffic and view the details of an entry with test2 as the source.
2. In the Source section, User is test2 and Group is the rsso-grp1.
3. The log message shows the user and group:
10: date=2020-05-25 time=15:34:43 logid="0000000013" type="traffic" subtype="forward"
level="notice" vd="vdom1" eventtime=1590446083718007055 tz="-0700" srcip=10.1.100.188
srcname="win7-2-A.Fortinet-FSSO.COM" srcport=56982 srcintf="port10"
srcintfrole="undefined" dstip=172.217.3.195 dstport=443 dstintf="port9"
dstintfrole="undefined" srccountry="Reserved" dstcountry="United States"
sessionid=120651 proto=17 action="accept" policyid=1 policytype="policy"
poluuid="d130f886-9ec6-51ea-206e-8c561c5244c6" policyname="pol1" user="test2"
group="rsso-grp1" authserver="vdom1" service="udp/443" trandisp="snat"
transip=172.16.200.1 transport=56982 duration=181 sentbyte=2001 rcvdbyte=1820 sentpkt=6
rcvdpkt=4 appcat="unscanned" sentdelta=0 rcvddelta=0 srchwvendor="VMware"
osname="Windows" srcswversion="7" mastersrcmac="00:0c:29:44:be:b9"
srcmac="00:0c:29:44:be:b9" srcserver=0
Scenario 2
In this scenario, RSSO user test2 is authenticated on pc1. Traffic is initialized on pc2 (172.16.200.185) going to pc1
(10.1.100.188).
Expected result:
In the logs, user test2 is shown as the destination user (dstuser). No destination group (dstgroup) is logged because
no RSSO user is logged in on pc2, so the traffic from pc2 is unauthenticated.
FortiOS 6.4.2 Administration Guide 1729
Fortinet Inc.
Log and Report
To verify the results:
1. In the GUI, go to Log & Report > Forward Traffic and view the details of an entry with 172.16.200.185 (pc2) as the
source.
2. In the Other section, Destination User is test2 and no destination group is shown.
3. The log message shows the destination user:
1: date=2020-05-22 time=07:38:06 logid="0000000020" type="traffic" subtype="forward"
level="notice" vd="root" eventtime=1590158286585506922 tz="-0700" srcip=172.16.200.185
identifier=1 srcintf="port9" srcintfrole="undefined" dstip=10.1.100.188 dstintf="port10"
dstintfrole="undefined" srccountry="Reserved" dstcountry="Reserved" sessionid=4395
proto=1 action="accept" policyid=3 policytype="policy" poluuid="d4f18e1e-9c36-51ea-6ec0-
3a354d5910ee" policyname="pol2" dstuser="test2" dstauthserver="root" service="PING"
trandisp="snat" transip=10.1.100.1 transport=0 duration=128 sentbyte=7620 rcvdbyte=5220
sentpkt=127 rcvdpkt=87 appcat="unscanned" sentdelta=7620 rcvddelta=5220
Scenario 3
In this scenario, RSSO user test2 in group rsso-grp1 is authenticated on pc1, and user test3 in group rsso-grp2 is
authenticated on pc2. Traffic flows from pc2 to pc1.
Expected result:
In the logs, user test3 is shown as the source user in the rsso-grp1 group. User test2 is shown as destination user
(dstuser) in the rsso-grp1 destination group (dstgroup). The destination group is logged because an RSSO user is
logged in to pc2.
To verify the results:
1. In the GUI, go to Log & Report > Forward Traffic and view the details of an entry with 172.16.200.185 (pc2) as the
source.
2. In the Source section, User is test3 and Group is the rsso-grp2. In the Other section, Destination User is test2 and
Destination Group is rsso-grp1.
FortiOS 6.4.2 Administration Guide 1730
Fortinet Inc.
Log and Report
3. The log message shows both the source and the destination users and groups:
8: date=2020-05-25 time=14:23:07 logid="0000000013" type="traffic" subtype="forward"
level="notice" vd="vdom1" eventtime=1590441786958007914 tz="-0700" srcip=172.16.200.185
srcport=64096 srcintf="port9" srcintfrole="undefined" dstip=10.1.100.188 dstport=80
dstintf="port10" dstintfrole="undefined" srccountry="Reserved" dstcountry="Reserved"
sessionid=112445 proto=6 action="close" policyid=3 policytype="policy"
poluuid="5894c368-9eca-51ea-fb4c-ec5a6c1d5043" policyname="pol2" user="test3"
group="rsso-grp2" authserver="vdom1" dstuser="test2" dstgroup="rsso-grp1"
dstauthserver="vdom1" service="HTTP" trandisp="snat" transip=10.1.100.1 transport=64096
duration=1 sentbyte=328 rcvdbyte=563 sentpkt=6 rcvdpkt=5 appcat="unscanned"
dsthwvendor="VMware" dstosname="Windows" dstswversion="7"
masterdstmac="00:0c:29:44:be:b9" dstmac="00:0c:29:44:be:b9" dstserver=0
Threat weight
Threat weight helps aggregate and score threats based on user-defined severity levels. It adds several fields such as
threat level (crlevel), threat score (crscore), and threat type (craction) to traffic logs. Threat weight logging is
enabled by default and the settings can be customized. Threats can be viewed from the Top Threats FortiView
dashboard.
To configure threat weight settings:
1. Go to Log & Report > Threat Weight.
2. Adjust the settings as needed, such as individual weights per threat type and risk level values.
3. Click Apply.
To add the Top Threats monitor to the dashboard:
1. In the tree menu, click Dashboard and in the FortiView section, click the + sign. The Add Monitor pane opens.
2. In the Security section, enable Show More and click Top Threats.
3. Configure the settings as needed.
4. Click Add Monitor.
FortiOS 6.4.2 Administration Guide 1731
Fortinet Inc.
Log and Report
5. Go to Dashboard > Top Threats. The Top Threats monitor displays threats based on the scores in the traffic logs.
6. Double-click a threat to view the summary.
7. Click Sources, Destinations, Countries/Regions, or Sessions to view more information. Double-click an entry to
view the log details.
Troubleshooting
The following topics provide information about troubleshooting logging and reporting:
l Log-related diagnose commands on page 1732
l Backing up log files or dumping log messages on page 1738
l SNMP OID for logs that failed to send on page 1740
Log-related diagnose commands
This topic shows commonly used examples of log-related diagnose commands.
Use the following diagnose commands to identify log issues:
FortiOS 6.4.2 Administration Guide 1732
Fortinet Inc.
Log and Report
l The following commands enable debugging log daemon (miglogd) at the proper debug level:
diagnose debug application miglogd x
diagnose debug enable
l The following commands display different status/statistics of miglogd at the proper level:
diagnose test application miglogd x
diagnose debug enable
To get the list of available levels, press Enter after diagnose test/debug application miglogd. The following
are some examples of commonly use levels.
If the debug log display does not return correct entries when log filter is set:
diagnose debug application miglogd 0x1000
For example, use the following command to display all login system event logs:
execute log filter device disk
execute log filter category event
execute log filter field action login
execute log display
Files to be searched:
file_no=65523, start line=0, end_line=237
file_no=65524, start line=0, end_line=429
file_no=65525, start line=0, end_line=411
file_no=65526, start line=0, end_line=381
file_no=65527, start line=0, end_line=395
file_no=65528, start line=0, end_line=458
file_no=65529, start line=0, end_line=604
file_no=65530, start line=0, end_line=389
file_no=65531, start line=0, end_line=384
session ID=1, total logs=3697
back ground search. process ID=26240, session_id=1
start line=1 view line=10
( action "login" )
ID=1, total=3697, checked=238, found=5
ID=1, total=3697, checked=668, found=13
ID=1, total=3697, checked=1080, found=23
ID=1, total=3697, checked=1462, found=23
ID=1, total=3697, checked=1858, found=23
ID=1, total=3697, checked=2317, found=54
ID=1, total=3697, checked=2922, found=106
ID=1, total=3697, checked=3312, found=111
ID=1, total=3697, checked=3697, found=114
You can check and/or debug the FortiGate to FortiAnalyzer connection status.
To show connect status with detailed information:
diagnose test application miglogd 1
faz: global , enabled
server=172.18.64.234, realtime=3, ssl=1, state=connected, src=, mgmt_name=FGh_Log_
vdom1_172.18.64.234, reliable=0, sni_prefix_type=none, required_entitlement=none
status: ver=6, used_disk=0, total_disk=0, global=0, vfid=0 conn_verified=Y
FortiOS 6.4.2 Administration Guide 1733
Fortinet Inc.
Log and Report
SNs: last sn update:107 seconds ago.
Sn list:
(FL-8HFT718900132,age=107s)
queue: qlen=0.
filter: severity=6, sz_exclude_list=0
voip dns ssh ssl cifs
subcategory:
traffic: forward local multicast sniffer
anomaly: anomaly
server: global, id=0, fd=132, ready=1, ipv6=0, 172.18.64.234/514
oftp-state=5
To collect debug information when FortiAnalyzer is enabled:
diagnose debug application miglogd 0x100
FGT-B-LOG (global) # <16208> miglog_start_rmt_conn()-1552: setting epoll_hd:0x7fc364e125e0
to _rmt_connect
<16209> miglog_start_rmt_conn()-1552: setting epoll_hd:0x7f72647715e0 to _rmt_connect
<16206> miglog_start_rmt_conn()-1552: setting epoll_hd:0x141f69e0 to _rmt_connect
<16209> _rmt_connect()-1433: oftp is ready.
<16209> _rmt_connect()-1435: xfer_status changed from 2 to 2 for global-faz
<16209> _rmt_connect()-1439: setting epoll_hd:0x7f72647715e0 to _rmt_recv
<16209> _check_oftp_certificate()-248: checking sn:FL-8HFT718900132 vs cert sn:FL-
8HFT718900132
<16209> _check_oftp_certificate()-252: Verified the certificate of peer (172.18.64.234) to
match sn=FL-8HFT718900132
<16209> _faz_post_connection()-292: Certificate verification:enabled, Faz verified:1
<16209> _send_queue_item()-518: xfer_status changed from 2 to 1 for global-faz
<16209> _send_queue_item()-523: type=0, cat=0, logcount=0, len=0
<16209> _oftp_send()-487: dev=global-faz type=17 pkt_len=34
<16209> _oftp_send()-487: opt=253, opt_len=10
<16209> _oftp_send()-487: opt=81, opt_len=12
<16208> _rmt_connect()-1433: oftp is ready.
<16208> _rmt_connect()-1435: xfer_status changed from 2 to 2 for global-faz
<16208> _rmt_connect()-1439: setting epoll_hd:0x7fc364e125e0 to _rmt_recv
<16208> _check_oftp_certificate()-248: checking sn:FL-8HFT718900132 vs cert sn:FL-
8HFT718900132
<16208> _check_oftp_certificate()-252: Verified the certificate of peer (172.18.64.234) to
match sn=FL-8HFT718900132
<16208> _faz_post_connection()-292: Certificate verification:enabled, Faz verified:1
<16208> _send_queue_item()-518: xfer_status changed from 2 to 1 for global-faz
<16208> _send_queue_item()-523: type=0, cat=0, logcount=0, len=0
<16208> _oftp_send()-487: dev=global-faz type=17 pkt_len=34
<16208> _oftp_send()-487: opt=253, opt_len=10
<16209> _oftp_recv()-1348: opt=252, opt_len=996
<16208> _oftp_send()-487: opt=81, opt_len=12
<16209> _process_response()-960: checking opt code=252
<16209> _faz_process_oftp_resp()-488: ha nmember:1 nvcluster:0 mode:1
<16209> __is_sn_known()-356: MATCHED: idx:0 sn:FL-8HFT718900132
<16209> _faz_process_oftp_resp()-494: Received SN:FL-8HFT718900132 should update:0
<16208> _oftp_recv()-1348: dev=global-faz type=252 pkt_len=1008
FortiOS 6.4.2 Administration Guide 1734
Fortinet Inc.
Log and Report
<16208> _oftp_recv()-1348: opt=252, opt_len=996
<16208> _process_response()-960: checking opt code=252
<16208> _faz_process_oftp_resp()-488: ha nmember:1 nvcluster:0 mode:1
<16208> __is_sn_known()-356: MATCHED: idx:0 sn:FL-8HFT718900132
<16208> _faz_process_oftp_resp()-494: Received SN:FL-8HFT718900132 should update:0
<16206> _rmt_connect()-1433: oftp is ready.
<16206> _rmt_connect()-1435: xfer_status changed from 2 to 2 for global-faz
<16206> _rmt_connect()-1439: setting epoll_hd:0x141f69e0 to _rmt_recv
<16206> _check_oftp_certificate()-248: checking sn:FL-8HFT718900132 vs cert sn:FL-
8HFT718900132
<16206> _check_oftp_certificate()-252: Verified the certificate of peer (172.18.64.234) to
match sn=FL-8HFT718900132
<16206> _faz_post_connection()-292: Certificate verification:enabled, Faz verified:1
<16206> _send_queue_item()-518: xfer_status changed from 2 to 1 for global-faz
<16206> _send_queue_item()-523: type=0, cat=0, logcount=0, len=0
<16206> _oftp_send()-487: dev=global-faz type=17 pkt_len=34
<16206> _oftp_send()-487: opt=253, opt_len=10
<16206> _oftp_send()-487: opt=81, opt_len=12
<16206> _oftp_recv()-1348: dev=global-faz type=252 pkt_len=1008
<16206> _oftp_recv()-1348: opt=252, opt_len=996
<16206> _process_response()-960: checking opt code=252
<16206> _faz_process_oftp_resp()-488: ha nmember:1 nvcluster:0 mode:1
<16206> __is_sn_known()-356: MATCHED: idx:0 sn:FL-8HFT718900132
<16206> _faz_process_oftp_resp()-494: Received SN:FL-8HFT718900132 should update:0
<16209> _oftp_recv()-1348: dev=global-faz type=1 pkt_len=985
<16209> _oftp_recv()-1348: opt=12, opt_len=16
......
<16209> _build_ack()-784: xfer_status changed from 1 to 2 for global-faz
<16209> _process_response()-960: checking opt code=81
......
<16209> _send_queue_item()-523: type=1, cat=0, logcount=0, len=0
<16209> _oftp_send()-487: dev=global-faz type=1 pkt_len=24
<16209> _oftp_send()-487: opt=1, opt_len=12
<16209> _send_queue_item()-523: type=7, cat=0, logcount=0, len=988
<16209> _oftp_send()-487: dev=global-faz type=252 pkt_len=1008
<16209> _oftp_send()-487: opt=252, opt_len=996
<16208> _oftp_recv()-1348: dev=global-faz type=1 pkt_len=58
<16208> _oftp_recv()-1348: opt=12, opt_len=16
<16208> _oftp_recv()-1348: opt=51, opt_len=9
<16208> _oftp_recv()-1348: opt=49, opt_len=12
<16208> _oftp_recv()-1348: opt=52, opt_len=9
<16208> _build_ack()-784: xfer_status changed from 1 to 2 for global-faz
<16208> _process_response()-960: checking opt code=52
<16208> _send_queue_item()-523: type=1, cat=0, logcount=0, len=0
<16208> _oftp_send()-487: dev=global-faz type=1 pkt_len=24
<16208> _oftp_send()-487: opt=1, opt_len=12
FortiOS 6.4.2 Administration Guide 1735
Fortinet Inc.
Log and Report
<16206> _oftp_recv()-1348: dev=global-faz type=1 pkt_len=985
......
<16208> _send_queue_item()-523: type=3, cat=1, logcount=1, len=301
<16206> _oftp_recv()-1348: opt=78, opt_len=55
......
<16206> _build_ack()-784: xfer_status changed from 1 to 2 for global-faz
<16206> _process_response()-960: checking opt code=81
......
<16206> _send_queue_item()-523: type=1, cat=0, logcount=0, len=0
<16206> _oftp_send()-487: dev=global-faz type=1 pkt_len=24
<16206> _oftp_send()-487: opt=1, opt_len=12
<16206> _send_queue_item()-523: type=7, cat=0, logcount=0, len=988
<16206> _oftp_send()-487: dev=global-faz type=252 pkt_len=1008
<16206> _oftp_send()-487: opt=252, opt_len=996
<16206> _add_change_notice_queue_item()-269: Change notice packect added to queue. len=145
......
<16206> _send_queue_item()-523: type=2, cat=0, logcount=0, len=300
<16206> _oftp_send()-487: dev=global-faz type=37 pkt_len=300
......
<16206> _oftp_send()-487: opt=152, opt_len=40
<16206> _oftp_send()-487: opt=74, opt_len=40
<16206> _oftp_send()-487: opt=82, opt_len=93
<16206> _oftp_recv()-1348: dev=global-faz type=1 pkt_len=24
<16206> _oftp_recv()-1348: opt=1, opt_len=12
<16206> _process_response()-960: checking opt code=1
To check the FortiGate to FortiGate Cloud log server connection status:
diagnose test application miglogd 20
FGT-B-LOG # diagnose test application miglogd 20
Home log server:
Address: 172.16.95.92:514
Alternative log server:
Address: 172.16.95.26:514
oftp status: established
Debug zone info:
Server IP: 172.16.95.92
Server port: 514
Server status: up
Log quota: 102400MB
Log used: 673MB
Daily volume: 20480MB
FDS arch pause: 0
fams archive pause: 0
To check real-time log statistics by log type since the miglogd daemon start:
diagnose test application miglogd 4
FortiOS 6.4.2 Administration Guide 1736
Fortinet Inc.
Log and Report
FGT-B-LOG (global) # diagnose test application miglogd 4
info for vdom: root
disk
event: logs=1238 len=262534, Sun=246 Mon=247 Tue=197 Wed=0 Thu=55 Fri=246 Sat=247
compressed=163038
dns: logs=4 len=1734, Sun=0 Mon=0 Tue=0 Wed=0 Thu=4 Fri=0 Sat=0 compressed=453
report
event: logs=1244 len=225453, Sun=246 Mon=247 Tue=197 Wed=0 Thu=61 Fri=246 Sat=247
faz
event: logs=6 len=1548, Sun=0 Mon=0 Tue=6 Wed=0 Thu=0 Fri=0 Sat=0 compressed=5446
info for vdom: vdom1
memory
traffic: logs=462 len=389648, Sun=93 Mon=88 Tue=77 Wed=0 Thu=13 Fri=116 Sat=75
event: logs=3724 len=1170237, Sun=670 Mon=700 Tue=531 Wed=0 Thu=392 Fri=747 Sat=684
app-ctrl: logs=16 len=9613, Sun=3 Mon=3 Tue=3 Wed=0 Thu=0 Fri=5 Sat=2
dns: logs=71 len=29833, Sun=0 Mon=0 Tue=0 Wed=0 Thu=71 Fri=0 Sat=0
disk
traffic: logs=462 len=389648, Sun=93 Mon=88 Tue=77 Wed=0 Thu=13 Fri=116 Sat=75
compressed=134638
event: logs=2262 len=550957, Sun=382 Mon=412 Tue=307 Wed=0 Thu=306 Fri=459 Sat=396
compressed=244606
app-ctrl: logs=16 len=9613, Sun=3 Mon=3 Tue=3 Wed=0 Thu=0 Fri=5 Sat=2 compressed=3966
dns: logs=71 len=29833, Sun=0 Mon=0 Tue=0 Wed=0 Thu=71 Fri=0 Sat=0 compressed=1499
report
traffic: logs=462 len=375326, Sun=93 Mon=88 Tue=77 Wed=0 Thu=13 Fri=116 Sat=75
event: logs=3733 len=1057123, Sun=670 Mon=700 Tue=531 Wed=0 Thu=401 Fri=747 Sat=684
app-ctrl: logs=16 len=9117, Sun=3 Mon=3 Tue=3 Wed=0 Thu=0 Fri=5 Sat=2
faz
traffic: logs=462 len=411362, Sun=93 Mon=88 Tue=77 Wed=0 Thu=13 Fri=116 Sat=75
compressed=307610
event: logs=3733 len=1348297, Sun=670 Mon=700 Tue=531 Wed=0 Thu=401 Fri=747 Sat=684
compressed=816636
app-ctrl: logs=16 len=10365, Sun=3 Mon=3 Tue=3 Wed=0 Thu=0 Fri=5 Sat=2 compressed=8193
dns: logs=71 len=33170, Sun=0 Mon=0 Tue=0 Wed=0 Thu=71 Fri=0 Sat=0 compressed=0
To check log statistics to the local/remote log device since the miglogd daemon start:
diagnose test application miglogd 6 1 <<< 1 means the first child daemon
diagnose test application miglogd 6 2 <<< 2 means the second child daemon
FGT-B-LOG (global) # diagnose test application miglogd 6 1
mem=4288, disk=4070, alert=0, alarm=0, sys=5513, faz=4307, webt=0, fds=0
interface-missed=208
Queues in all miglogds: cur:0 total-so-far:36974
global log dev statistics:
syslog 0: sent=6585, failed=152, relayed=0
faz 0: sent=13, failed=0, cached=0, dropped=0 , relayed=0
FortiOS 6.4.2 Administration Guide 1737
Fortinet Inc.
Log and Report
To check the miglogd daemon number and increase/decrease miglogd daemon:
diagnose test application miglogd 15 <<< Show miglog ID
diagnose test application miglogd 13 <<< Increase one miglogd child
diagnose test application miglogd 14 <<< Decrease one miglogd child
FGT-B-LOG (global) # diagnose test application miglogd 15
Main miglogd: ID=0, children=2, active-children=2
ID=1, duration=70465.
ID=2, duration=70465.
FGT-B-LOG (global) # diagnose test application miglogd 13
FGT-B-LOG (global) # diagnose test application miglogd 15
Main miglogd: ID=0, children=3, active-children=3
ID=1, duration=70486.
ID=2, duration=70486.
ID=3, duration=1.
FGT-B-LOG (global) # diagnose test application miglogd 14
FGT-B-LOG (global) # diagnose test application miglogd 15
Main miglogd: ID=0, children=2, active-children=2
ID=1, duration=70604.
ID=2, duration=70604.
To check the remote queue and see the maximum buffered memory size:
diagnose test application miglogd 41
cache maximum: 105405644(100MB) objects: 0 used: 0(0MB) allocated: 0(0MB)
VDOM:root
Queue for: global-faz
memory queue:
num:0 size:0(0MB) max:105405644(100MB) logs:0
Queue for: fds
memory queue:
num:0 size:0(0MB) max:97852620(93MB) logs:0
Backing up log files or dumping log messages
When a log issue is caused by a particular log message, it is very help to get logs from that FortiGate. This topic provides
steps for using execute log backup or dumping log messages to a USB drive.
Backing up full logs using execute log backup
This command backs up all disk log files and is only available on FortiGates with an SSD disk.
Before running execute log backup, we recommend temporarily stopping miglogd and reportd.
FortiOS 6.4.2 Administration Guide 1738
Fortinet Inc.
Log and Report
To stop and kill miglogd and reportd:
diagnose sys process daemon-auto-restart disable miglogd
diagnose sys process daemon-auto-restart disable reportd
To store the log file on a USB drive:
1. Plug in a USB drive into the FortiGate.
2. Run this command:
exec log backup /usb/log.tar
To restart miglogd and reportd:
diagnose sys process daemon-auto-restart enable miglogd
diagnose sys process daemon-auto-restart enable reportd
Dumping log messages
To dump log messages:
1. Enable log dumping for miglogd daemon:
(global) # diagnose test application miglogd 26 1
miglogd(1) log dumping is enabled
2. Display all miglogd dumping status:
global) # diagnose test application miglogd 26 0 255
miglogd(0) log dumping is disabled
miglogd(1) log dumping is enabled
miglogd(2) log dumping is disabled
(global) # diagnose test application miglogd 26 2
miglogd(2) log dumping is enabled
(global) # diagnose test application miglogd 26 0
miglogd(0) log dumping is enabled
(global) # diagnose test application miglogd 26 0 255
miglogd(0) log dumping is enabled
miglogd(1) log dumping is enabled
miglogd(2) log dumping is enabled
3. Let the FortiGate run and collect log messages.
4. List the log dump files:
(global) # diagnose test application miglogd 33
2019-04-17 15:50:02 20828 log-1-0.dat
2019-04-17 15:48:31 4892 log-2-0.dat
5. Back up log dump files to the USB drive:
(global) # diagnose test application miglogd 34
Dumping file miglog1_index0.dat copied to USB disk OK.
FortiOS 6.4.2 Administration Guide 1739
Fortinet Inc.
Log and Report
Dumping file miglog2_index0.dat copied to USB disk OK.
6. Disable log dumping for miglogd daemon:
(global) # diagnose test application miglogd 26 0
miglogd(0) log dumping is disabled
(global) # diagnose test application miglogd 26 1
miglogd(1) log dumping is disabled
(global) # diagnose test application miglogd 26 2
miglogd(2) log dumping is disabled
(global) # diagnose test application miglogd 26 0 255
miglogd(0) log dumping is disabled
miglogd(1) log dumping is disabled
miglogd(2) log dumping is disabled
SNMP OID for logs that failed to send
When a syslog server encounters low-performance conditions and slows down to respond, the buffered syslog
messages in the kernel might overflow after a certain number of retransmissions, causing the overflowed messages to
be lost. OIDs track the lost messages or failed logs.
SNMP query OIDs include log statistics for global log devices:
l FORTINET-FORTIGATE-MIB:fortinet.fnFortiGateMib.fgLog.fgLogDeviceNumber 1.3.6.1.4.1.12356.101.21.1.1
l FORTINET-FORTIGATE-
MIB:fortinet.fnFortiGateMib.fgLog.fgLogDevices.fgLogDeviceTable.fgLogDeviceEntry.fgLogDeviceEntryIndex
1.3.6.1.4.1.12356.101.21.2.1.1.1
l FORTINET-FORTIGATE-
MIB:fortinet.fnFortiGateMib.fgLog.fgLogDevices.fgLogDeviceTable.fgLogDeviceEntry.fgLogDeviceEnabled
1.3.6.1.4.1.12356.101.21.2.1.1.2
l FORTINET-FORTIGATE-
MIB:fortinet.fnFortiGateMib.fgLog.fgLogDevices.fgLogDeviceTable.fgLogDeviceEntry.fgLogDeviceName
1.3.6.1.4.1.12356.101.21.2.1.1.3
l FORTINET-FORTIGATE-
MIB:fortinet.fnFortiGateMib.fgLog.fgLogDevices.fgLogDeviceTable.fgLogDeviceEntry.fgLogDeviceSentCount
1.3.6.1.4.1.12356.101.21.2.1.1.4
l FORTINET-FORTIGATE-
MIB:fortinet.fnFortiGateMib.fgLog.fgLogDevices.fgLogDeviceTable.fgLogDeviceEntry.fgLogDeviceRelayedCount
1.3.6.1.4.1.12356.101.21.2.1.1.5
l FORTINET-FORTIGATE-
MIB:fortinet.fnFortiGateMib.fgLog.fgLogDevices.fgLogDeviceTable.fgLogDeviceEntry.fgLogDeviceCachedCount
1.3.6.1.4.1.12356.101.21.2.1.1.6
l FORTINET-FORTIGATE-
MIB:fortinet.fnFortiGateMib.fgLog.fgLogDevices.fgLogDeviceTable.fgLogDeviceEntry.fgLogDeviceFailedCount
1.3.6.1.4.1.12356.101.21.2.1.1.7
l FORTINET-FORTIGATE-
MIB:fortinet.fnFortiGateMib.fgLog.fgLogDevices.fgLogDeviceTable.fgLogDeviceEntry.fgLogDeviceDroppedCount
1.3.6.1.4.1.12356.101.21.2.1.1.8
Where:
FortiOS 6.4.2 Administration Guide 1740
Fortinet Inc.
Log and Report
l fgLogDeviceNumber is the number of devices in the table.
l fgLogDeviceEnabled is either 1 or 0, indicating whether the device is enabled.
l fgLogDeviceName is the name of the device.
A FortiGate connected to a syslog server or FortiAnalyzer generates statistics that can be seen using the diagnose
test application miglogd command:
(global) # diagnose test application miglogd 6
mem=404, disk=657, alert=0, alarm=0, sys=920, faz=555, webt=0, fds=0
interface-missed=460
Queues in all miglogds: cur:0 total-so-far:526
global log dev statistics:
syslog 0: sent=254, failed=139, relayed=0
syslog 1: sent=220, failed=139, relayed=0
syslog 2: sent=95, failed=73, relayed=0
faz 0: sent=282, failed=0, cached=0, dropped=0 , relayed=0
Num of REST URLs: 3
/api/v2/monitor/system/csf/ : 0 : 300
/api/v2/cmdb/system/interface/ : 394.0.673.15877729363538323653.1547149763 : 1200
/api/v2/monitor/system/ha-checksums/ : 0 : 1200
faz 1: sent=272, failed=0, cached=0, dropped=0 , relayed=0
Num of REST URLs: 2
/api/v2/monitor/system/csf/ : 0 : 300
/api/v2/cmdb/system/interface/ : 394.0.673.15877729363538323653.1547149763 : 1200
The same statistics are also available in snmpwalk/snmpget on the OID 1.3.6.1.4.1.12356.101.21.
snmpwalk -v2c -c REGR-SYS 172.16.200.1 1.3.6.1.4.1.12356.101.21
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.1.1.0 = INTEGER: 9
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.1.0 = INTEGER: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.1.1 = INTEGER: 1
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.1.2 = INTEGER: 2
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.1.3 = INTEGER: 3
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.1.4 = INTEGER: 4
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.1.5 = INTEGER: 5
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.1.6 = INTEGER: 6
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.1.7 = INTEGER: 7
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.1.8 = INTEGER: 8
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.2.0 = INTEGER: 1
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.2.1 = INTEGER: 1
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.2.2 = INTEGER: 1
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.2.3 = INTEGER: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.2.4 = INTEGER: 1
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.2.5 = INTEGER: 1
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.2.6 = INTEGER: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.2.7 = INTEGER: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.2.8 = INTEGER: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.3.0 = STRING: "syslog"
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.3.1 = STRING: "syslog2"
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.3.2 = STRING: "syslog3"
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.3.3 = STRING: "syslog4"
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.3.4 = STRING: "faz"
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.3.5 = STRING: "faz2"
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.3.6 = STRING: "faz3"
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.3.7 = STRING: "webtrends"
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.3.8 = STRING: "fds"
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.4.0 = Counter32: 254
FortiOS 6.4.2 Administration Guide 1741
Fortinet Inc.
Log and Report
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.4.1 = Counter32: 220
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.4.2 = Counter32: 95
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.4.3 = Counter32: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.4.4 = Counter32: 282
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.4.5 = Counter32: 272
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.4.6 = Counter32: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.4.7 = Counter32: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.4.8 = Counter32: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.5.0 = Counter32: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.5.1 = Counter32: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.5.2 = Counter32: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.5.3 = Counter32: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.5.4 = Counter32: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.5.5 = Counter32: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.5.6 = Counter32: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.5.7 = Counter32: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.5.8 = Counter32: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.6.0 = Gauge32: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.6.1 = Gauge32: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.6.2 = Gauge32: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.6.3 = Gauge32: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.6.4 = Gauge32: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.6.5 = Gauge32: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.6.6 = Gauge32: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.6.7 = Gauge32: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.6.8 = Gauge32: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.7.0 = Counter32: 139
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.7.1 = Counter32: 139
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.7.2 = Counter32: 73
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.7.3 = Counter32: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.7.4 = Counter32: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.7.5 = Counter32: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.7.6 = Counter32: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.7.7 = Counter32: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.7.8 = Counter32: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.8.0 = Counter32: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.8.1 = Counter32: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.8.2 = Counter32: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.8.3 = Counter32: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.8.4 = Counter32: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.8.5 = Counter32: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.8.6 = Counter32: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.8.7 = Counter32: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.8.8 = Counter32: 0
To get the type of logging device that is attached to the FortiGate:
root@PC05:/home/tester/autolib/trunk# snmpwalk -v2c -c REGR-SYS 172.16.200.1
1.3.6.1.4.1.12356.101.21.2.1.1.3
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.3.0 = STRING: "syslog"
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.3.1 = STRING: "syslog2"
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.3.2 = STRING: "syslog3"
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.3.3 = STRING: "syslog4"
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.3.4 = STRING: "faz"
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.3.5 = STRING: "faz2"
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.3.6 = STRING: "faz3"
FortiOS 6.4.2 Administration Guide 1742
Fortinet Inc.
Log and Report
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.3.7 = STRING: "webtrends"
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.3.8 = STRING: "fds"
To get the present state of the logging device that is attached to the FortiGate:
root@PC05:/home/tester/autolib/trunk# snmpwalk -v2c -c REGR-SYS 172.16.200.1
1.3.6.1.4.1.12356.101.21.2.1.1.2
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.2.0 = INTEGER: 1
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.2.1 = INTEGER: 1
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.2.2 = INTEGER: 1
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.2.3 = INTEGER: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.2.4 = INTEGER: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.2.5 = INTEGER: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.2.6 = INTEGER: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.2.7 = INTEGER: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.2.8 = INTEGER: 0
To get the failed log count value:
root@PC05:/home/tester/autolib/trunk# snmpwalk -v2c -c REGR-SYS 172.16.200.1
1.3.6.1.4.1.12356.101.21.2.1.1.7
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.7.0 = Counter32: 139
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.7.1 = Counter32: 139
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.7.2 = Counter32: 73
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.7.3 = Counter32: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.7.4 = Counter32: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.7.5 = Counter32: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.7.6 = Counter32: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.7.7 = Counter32: 0
FORTINET-FORTIGATE-MIB::fnFortiGateMib.21.2.1.1.7.8 = Counter32: 0
FortiOS 6.4.2 Administration Guide 1743
Fortinet Inc.
VM
Amazon Web Services
See the FortiOS 6.4 AWS Administration Guide.
Microsoft Azure
See the FortiOS 6.4 Azure Administration Guide.
Google Cloud Platform
See the FortiOS 6.4 GCP Administration Guide.
Oracle OCI
See the FortiOS 6.4 OCI Administration Guide.
AliCloud
See the FortiOS 6.4 AliCloud Administration Guide.
Private cloud
See the Private Cloud section in the Public/Private Cloud document library.
VM license
The FortiGate VM License page is accessible from the Dashboard > Status page in the Virtual Machine widget. Click the
device license and select FortiGate VM License.
FortiOS 6.4.2 Administration Guide 1744
Fortinet Inc.
VM
The FortiGate VM License page displays the following information:
Field Description
License status One of the following statuses is displayed:
l Valid: the VM can connect and validate the license against a FortiManager or
FortiGuard server. All features are available.
l Warning: the VM cannot connect and validate against a FortiManager or
FortiGuard server. A check is made against how many days the warning
status is continuous. If the number is less than 30 days, the status does not
change.
l Invalid: the VM cannot connect and validate against a FortiManager or
FortiGuard server. A check is made against how many days the warning
status is continuous. If the number is 30 days or more, the status changes to
invalid. GUI access is restricted until a valid license is uploaded. Firewall
policies will not work. FortiGuard downloads are not available.
l Pending: a temporary state where the VM is attempting to validate its license.
Reasons for having a warning or invalid status include:
l The network environment does not allow FortiGate-VM to connect to the
FortiGuard server.
l The license might be expired. Check the expiration date for evaluation or
term-based licenses.
l Another VM has been already validated with FortiGuard using the same
license. See VM license activation for details about duplicated VM instances.
Allocated vCPUs Number of allocated and total allowable vCPUs
Allocated RAM Amount of allocated RAM (in FortiOS 6.2.2 and later, there are no RAM
restrictions)
Expires on Expiry date (value depends on the type of license)
This information is visible in the CLI by running get system status (see CLI troubleshooting).
Uploading a license file
After you submit an order for a FortiGate-VM, Fortinet sends a license registration code to the email address that you
entered in the order form. Use this code on the FortiCloud portal to register the FortiGate-VM.
Once the VM is registered, you can download the license file in .LIC format. On the FortiGate VM License page, click
Upload. The system will prompt you to reboot and validate the license with the FortiGuard server. Once validated, your
FortiGate-VM is fully functional.
The VM license window may also appear immediately after logging in if you are running a VM with an evaluation license
that has expired.
In cases where the GUI is not accessible, you can upload the license using secure copy (SCP).
For information about injecting Flex-VM license tokens, see Injecting tokens into FortiGate-VM
in the Flex VM Deployment Guide.
FortiOS 6.4.2 Administration Guide 1745
Fortinet Inc.
VM
To upload the license using SCP:
1. Enable SCP:
config system global
set admin-scp enable
end
2. Enable SSH in the administrative access for the interface where the transfer will take place:
config system interface
edit <interface>
append allowaccess ssh
next
end
3. On your computer, upload the VM license. This example is for Linux:
scp <filename> <admin-user>@<FortiGate_IP>:vmlicense
Types of VM licenses
FortiGate-VM offers perpetual licensing (normal series and V-series) and annual subscription licensing (S-series). SKUs
are based on the number of vCPUs (1, 2, 4, 8, 16, 32, or unlimited).
The Flex-VM program allows qualified enterprise and MSSP customers to create as many VM entitlements as required.
Resource consumption is based upon predefined points that are calculated on a daily basis. For information, see the
Flex-VM Program Guide in the Fortinet document library.
Feature Normal series V-series S-series Flex-VM
Licensing and The VM base is perpetual. Single annually An annually
support You must separately contract support contracted SKU that contracted program
services on an annual basis. contains a VM base to create multiple
See the price list for details. and a FortiCare sets of a single
service bundle. entitlement per VM.
Four support service Entitlements contain
bundle types are a VM base and
available: FortiCare bundle.
l Only FortiCare Four support service
l UTM bundle types are
l Enterprise available:
l ATP l Only FortiCare
l UTM
l Enterprise
l ATP
FortiOS 6.4.2 Administration Guide 1746
Fortinet Inc.
VM
Feature Normal series V-series S-series Flex-VM
vCPU number Not supported. Supported. You can Supported. You can
upgrade during also upgrade the apply different VM
contracted term support service entitlement
bundle. configurations in the
Contact a Fortinet Flex-VM portal. API
sales representative is not supported at
to upgrade. this time.
vCPU number Not supported.
downgrade during
contracted term
VDOM support By default, each CPU By default, all CPU levels do not support
level supports up to a adding VDOMs.
certain number of
VDOMs.
Refer to the
FortiGate-VM data
sheet for default
limits.
CLI troubleshooting
In some cases, more information can be viewed from the CLI to diagnose issues with VM licensing. This is also useful
when the GUI is inaccessible due to an invalid contract.
Before you begin, ensure your FortiGate has the proper routes to connect to the internet.
To view the license status, expiration date, and VM resources:
# get system status
Version: FortiGate-VM64-KVM v6.4.2,build1723,200730 (GA)
...
Serial-Number: FGVM08**********
....
License Status: Valid
License Expiration Date: 2020-12-10
VM Resources: 1 CPU/8 allowed, 2010 MB RAM
...
To display license details:
# diagnose debug vm-print-license
SerialNumber: FGVM08**********
CreateDate: Tue Dec 10 00:57:32 2019
License expires: Thu Dec 10 00:00:00 2020
Expiry: 366
Key: yes
Cert: yes
Key2: yes
FortiOS 6.4.2 Administration Guide 1747
Fortinet Inc.
VM
Cert2: yes
Model: 08 (11)
CPU: 8
MEM: 2147483647
To display license information from FortiGuard:
# diagnose hardware sysinfo vm full
UUID: abbe****************************
valid: 1
status: 1
code: 200
warn: 0
copy: 0
received: 4604955037
warning: 4600905081
recv: 202009152207
dup:
This combination indicates the license is valid and functioning normally:
valid: 1
status: 1
code: 200
This combination indicates the license is valid but may be running a duplicate instance:
valid: 1
status: 4
code: 401
This combination indicates the system cannot connect to FortiGuard:
valid: 0
status: 2
code: 502
This combination indicates the license is invalid:
valid: 0
status: 3
code: 400
Contact Fortinet Support for assistance if your licensing issue persists.
FortiGate multiple connector support
This guide shows how to configure Fabric connectors and resolve dynamic firewall addresses through the configured
Fabric connector in FortiOS.
FortiOS supports multiple Fabric connectors including public connectors (AWS, Azure, GCP, OCI, AliCloud) and private
connectors (Kubernetes, VMware ESXi, VMware NSX, OpenStack, Cisco ACI, Nuage). FortiOS also supports multiple
instances for each type of Fabric connector.
FortiOS 6.4.2 Administration Guide 1748
Fortinet Inc.
VM
This guide uses an Azure Fabric connector as an example. The configuration procedure for all supported Fabric
connectors is the same. In the following topology, the FortiGate accesses the Azure public cloud through the Internet:
This process consists of the following:
1. Configure the interface.
2. Configure a static route to connect to the Internet.
3. Configure two Azure Fabric connectors with different client IDs.
4. Check the configured Fabric connectors.
5. Create two firewall addresses.
6. Check the resolved firewall addresses after the update interval.
7. Run diagnose commands.
To configure the interface:
1. In FortiOS, go to Network > Interfaces.
2. Edit port1:
a. From the Role dropdown list, select WAN.
b. In the IP/Network Mask field, enter 10.6.30.4/255.255.255.0 for the interface connected to the Internet.
To configure a static route to connect to the Internet:
1. Go to Network > Static Routes. Click Create New.
2. In the Destination field, enter 0.0.0.0/0.0.0.0.
3. From the Interface dropdown list, select port1.
4. In the Gateway Address field, enter 10.60.30.254.
To configure two Azure Fabric connectors with different client IDs:
1. Go to Security Fabric > External Connectors.
2. Click Create New. Configure the first Fabric connector:
a. Select Microsoft Azure.
b. In the Name field, enter azure1.
c. In the Status field, select Enabled.
d. From the Server region dropdown list, select Global.
e. In the Tenant ID field, enter the tenant ID. In this example, it is 942b80cd-1b14-42a1-8dcf-4b21dece61ba.
f. In the Client ID field, enter the client ID. In this example, it is 14dbd5c5-307e-4ea4-8133-68738141feb1.
g. In the Client secret field, enter the client secret.
h. Leave the Resource path disabled.
i. Click OK.
3. Click Create New. Configure the second Fabric connector:
a. Select Microsoft Azure.
b. In the Name field, enter azure2.
FortiOS 6.4.2 Administration Guide 1749
Fortinet Inc.
VM
c. In the Status field, select Enabled.
d. From the Server region dropdown list, select Global.
e. In the Tenant ID field, enter the tenant ID. In this example, it is 942b80cd-1b14-42a1-8dcf-4b21dece61ba.
f. In the Client ID field, enter the client ID. In this example, it is 3baf0a6c-44ff-4f94-b292-07f7a2c36be6.
g. In the Client secret field, enter the client secret.
h. Leave the Resource path disabled.
i. Click OK.
To check the configured Fabric connectors:
1. Go to Security Fabric > External Connectors.
2. Click the Refresh icon in the upper right corner of each configured Fabric connector. A green up arrow appears in
the lower right corner, meaning that both Fabric connectors are connected to the Azure cloud using different client
IDs.
To create two firewall addresses:
This process creates two Fabric connector firewall addresses to associate with the configured Fabric connectors.
1. Go to Policy & Objects > Addresses.
2. Click Create New > Address. Configure the first Fabric connector firewall address:
a. In the Name field, enter azure-address-1.
b. From the Type dropdown list, select Fabric Connector address.
c. From the SDN Connector dropdown list, select azure1.
d. For SDN address type, select Private.
e. From the Filter dropdown list, select the desired filter.
f. For Interface, select any.
g. Click OK.
3. Click Create New > Address. Configure the second Fabric connector firewall address:
a. In the Name field, enter azure-address-1.
b. From the Type dropdown list, select Fabric Connector address.
c. From the SDN Connector dropdown list, select azure2.
d. For SDN address type, select Private.
e. From the Filter dropdown list, select the desired filter.
f. For Interface, select any.
g. Click OK.
To check the resolved firewall addresses after the update interval:
By default, the update interval is 60 seconds.
1. Go to Policy & Objects > Addresses.
2. Hover over the created addresses. The firewall address that the configured Fabric connectors resolved display.
FortiOS 6.4.2 Administration Guide 1750
Fortinet Inc.
VM
To run diagnose commands:
Run the show sdn connector status command. Both Fabric connectors should appear with a status of connected.
Run the diagnose debug application azd -1 command. The output should look like the following:
Level2-downstream-D # diagnose debug application azd -1
...
azd sdn connector azure1 start updating IP addresses
azd checking firewall address object azure-address-1, vd 0
IP address change, new list:
10.18.0.4
...
To restart the Azure Fabric connector daemon, run the diagnose test application azd 99 command.
Adding VDOMs with FortiGate v-series
Each FortiGate-VM base license type allows a default number of VDOMs. This topic provides sample procedures to add
VDOMs beyond the default number using separately purchased VDOM licenses.
This topic consists of the following steps:
1. Activate the FortiGate-VM with the base license.
2. Add more VDOMs to the FortiGate-VM.
To activate the FortiGate-VM with the base license:
1. Purchase and register the FortiGate-VM base license in FortiCare:
a. Purchase the FortiGate-VM base license from Fortinet or a Fortinet reseller.
b. You receive a license certification with a registration code. Open the certification.
c. Log in to Fortinet Customer Service & Support.
d. Go to Asset > Register/Activate and enter the provided registration code.
e. Follow the registration process. The serial number generates and displays on the Registration Completion
page.
f. Go to Asset > Manage/View Products. Click the serial number to download the license file.
2. Upload the FortiGate-VM base license file to FortiOS:
a. Log in to the FortiGate-VM GUI.
b. In Dashboard > Status, in the Virtual Machine widget, click FortiGate VM License.
c. Click the Upload button.
d. Select the FortiGate-VM base license file, then click OK. The FortiGate-VM reboots after applying the base
license.
3. Verify the FortiGate-VM base license status and VDOM information:
a. Log in to the FortiGate-VM GUI.
b. In Dashboard > Status, in the Virtual Machine widget, ensure that there is a checkmark in front of the FortiGate-
VM base license name. The checkmark indicates that the base license is valid.
c. You can check VDOM information using the CLI. The following output shows that the maximum number of
VDOMs is currently one. This is correct since the FortiGate-VM base license only supports the default root
VDOM that the system uses.
FGVM4VTM19000476 # get system status
FortiOS 6.4.2 Administration Guide 1751
Fortinet Inc.
VM
Version: FortiGate-VM64 v6.2.0,build0866,190328 (GA)
Virus-DB: 69.00091(2019-06-07 12:19)
Extended DB: 1.00000(2018-04-09 18:07)
Extreme DB: 1.00000(2018-04-09 18:07)
IPS-DB: 14.00610(2019-05-09 00:14)
IPS-ETDB: 0.00000(2001-01-01 00:00)
APP-DB: 14.00610(2019-05-09 00:14)
INDUSTRIAL-DB: 14.00610(2019-05-09 00:14)
Serial-Number: FGVM4VTM19000476
IPS Malicious URL Database: 2.00325(2019-06-07 03:56)
Botnet DB: 4.00490(2019-05-30 10:00)
License Status: Valid
License Expires: 2020-04-30
VM Resources: 2 CPU/4 allowed, 3022 MB RAM/6144 MB allowed
Log hard disk: Available
Hostname: FGVM4VTM19000476
Operation Mode: NAT
Current virtual domain: root
Max number of virtual domains: 1
Virtual domains status: 1 in NAT mode, 0 in TP mode
Virtual domain configuration: disable
FIPS-CC mode: disable
Current HA mode: standalone
Branch point: 0866
Release Version Information: GA
FortiOS x86-64: Yes
System time: Fri Jun 7 14:04:55 2019
To add more VDOMs to the FortiGate-VM:
You can repeat this procedure multiple times to stack multiple VDOM licenses on the same FortiGate-VM.
1. Purchase and register the FortiGate-VM upgrade license in FortiCare. This example adds 15 VDOMs:
a. Purchase the FortiGate-VM upgrade license from Fortinet or a Fortinet reseller.
b. You receive a license certification with a registration code. Open the certification.
c. Log in to Fortinet Customer Service & Support.
d. Go to Asset > Register/Activate and enter the provided registration code.
e. On the Specify License Confirmation Information screen, enter the FortiGate-VM serial number to apply the
VDOM upgrade license to the FortiGate-VM. In this example, the FortiGate-VM serial number is
FGVM4VTM19000476.
f. Follow the registration process.
g. Go to Asset > Manage/View Products > . Select the desired product, then click License & Key. The VDOM
upgrade license displays under Registered License(s), and a key for adding 15 VDOMs (in this example
FortiOS 6.4.2 Administration Guide 1752
Fortinet Inc.
VM
M6JSD-8EE32-VHIJB-N) displays under Available Key(s).
2. Apply the FortiGate-VM upgrade license key to FortiOS:
a. Log in to the FortiGate-VM CLI in the local console or using SSH.
b. Apply the VDOM upgrade license key:
FGVM4VTM19000476 # execute upd-vd-license M6JSD-8EE32-VHIJB-N
update vdom license succeeded
3. Verify the FortiGate-VM VDOM information:
a. Log in to the FortiGate-VM CLI in the local console or using SSH.
b. Check VDOM information using the CLI. The following output shows that the maximum number of VDOMs is
currently 15. When you add VDOMs for the first time on a FortiGate-VM v-series instance, FortiOS does not
count the default VDOM, as the default VDOM is the so-called root VDOM that the system uses and FortiOS
does not treat it as a countable VDOM in terms of VDOM addition. Therefore, as in this example, if your
FortiGate-VM had the default VDOM configuration, then you add 15 VDOMs, FortiOS displays the maximum
VDOM number as 15, not 16.
FGVM4VTM19000476 # get system status
Version: FortiGate-VM64 v6.2.0,build0866,190328 (GA)
Virus-DB: 69.00091(2019-06-07 12:19)
Extended DB: 1.00000(2018-04-09 18:07)
Extreme DB: 1.00000(2018-04-09 18:07)
IPS-DB: 14.00610(2019-05-09 00:14)
IPS-ETDB: 0.00000(2001-01-01 00:00)
APP-DB: 14.00610(2019-05-09 00:14)
INDUSTRIAL-DB: 14.00610(2019-05-09 00:14)
Serial-Number: FGVM4VTM19000476
IPS Malicious URL Database: 2.00325(2019-06-07 03:56)
Botnet DB: 4.00490(2019-05-30 10:00)
License Status: Valid
License Expires: 2020-04-30
VM Resources: 2 CPU/4 allowed, 3022 MB RAM/6144 MB allowed
Log hard disk: Available
Hostname: FGVM4VTM19000476
Operation Mode: NAT
Current virtual domain: root
Max number of virtual domains: 15
Virtual domains status: 1 in NAT mode, 0 in TP mode
Virtual domain configuration: disable
FIPS-CC mode: disable
Current HA mode: standalone
FortiOS 6.4.2 Administration Guide 1753
Fortinet Inc.
VM
Branch point: 0866
Release Version Information: GA
FortiOS x86-64: Yes
System time: Fri Jun 7 14:39:27 2019
Terraform: FortiOS as a provider
Fortinet's Terraform support provides customers with more ways to efficiently deploy, manage, and automate security
across physical FortiGate appliances and virtual environments. You can use Terraform to automate various IT
infrastructure needs, thereby diminishing mistakes from repetitive manual configurations.
For example, if Fortinet is releasing a new FortiOS version, your organization may require you to test a new functionality
to determine how it may impact the environment before globally deploying the new version. In this case, the ability to
rapidly stand up environments and test these functions prior to production environment integration provides a resource-
efficient and fault-tolerant approach.
The following example demonstrates how to use the Terraform FortiOS provider to perform simple configuration
changes on a FortiGate unit. It requires the following:
l FortiOS 6.0 or later
l FortiOS Provider: This example uses terraform-provider-fortios 1.0.0.
l Terraform: This example uses Terraform 0.11.14.
l REST API administrator created on the FortiGate with the API key
For more information, see the Terraform FortiOS Provider at https://www.terraform.io/docs/providers/fortios/index.html.
To create a REST API administrator:
1. On the FortiGate, go to System > Administrators and click Create New > REST API Admin.
2. Enter the Username and, optionally, enter Comments.
3. Select an Administrator Profile.
4. We recommend that you create a new profile with minimal privileges for this terraform script:
a. In the Administrator Profile drop down click Create New.
b. Enter a name for the profile.
c. Configure the Access Permissions:
l None: The REST API is not permitted access to the resource.
l Read: The REST API can send read requests (HTTP GET) to the resource.
l Read/Write: The REST API can send read and write requests (HTTP GET/POST/PUT/DELETE) to the
resource.
d. Click OK.
5. Enter Trusted Hosts to specify the devices that are allowed to access this FortiGate.
6. Click OK.
An API key is displayed. This key is only shown once, so you must copy and store it securely.
To configure FortiGate with Terraform Provider module support:
1. Download the terraform-provider-fortios file to a directory on the management computer.
2. Create a new file with the .tf extension for configuring your FortiGate:
root@mail:/home/terraform# ls
FortiOS 6.4.2 Administration Guide 1754
Fortinet Inc.
VM
terraform-provider-fortios_v1.0.0_x4 test.tf
3. Edit the test.tf Terraform configuration file:
In this example, the FortiGate's IP address is 10.6.30.5, and the API user token is 17b********************63ck. Your
provider information must also be changed.
# Configure the FortiOS Provider
provider "fortios" {
hostname = "10.6.30.5"
token = "17b********************63ck"
}
4. Create the resources for configuring your DNS object and adding a static route:
resource "fortios_system_setting_dns" "test1" {
primary = "172.16.95.16"
secondary = "8.8.8.8"
}
resource "fortios_networking_route_static" "test1" {
dst = "110.2.2.122/32"
gateway = "2.2.2.2"
blackhole = "disable"
distance = "22"
weight = "3"
priority = "3"
device = "port2"
comment = "Terraform test"
}
5. Save your Terraform configuration file.
6. In the terminal, enter terraform init to initialize the working directory.
It reads the provider if the name follows the convention terraform-provider-[name]:
root@mail:/home/terraform# terraform init
Initializing the backend...
Terraform has been successfully initialized!
You may now begin working with Terraform. Try running "terraform plan" to see
any changes that are required for your infrastructure. All Terraform commands
should now work.
If you ever set or change modules or backend configuration for Terraform,
rerun this command to reinitialize your working directory. If you forget, other
commands will detect it and remind you to do so if necessary.
7. Run terraform -v to verify the version of loaded provider module:
root@mail:/home/terraform# terraform -v
Terraform v0. 11.14
+ provider.fortios v1.0.0
8. Enter terraform plan to parse the configuration file and read from the FortiGate configuration to see what
Terraform changes:
This example create a static route and updates the DNS address. You can see that Terraform reads the DNS
addresses from the FortiGate and then lists them.
root@mail:/home/terraform# terraform plan
Refreshing Terraform state in-memory prior to plan...
The refreshed state will be used to calculate this plan, but will not be
persisted to local or remote state storage.
fortios_networking_route_static.test1: Refreshing state... (ID: 2)
FortiOS 6.4.2 Administration Guide 1755
Fortinet Inc.
VM
fortios_system_setting_dns.test1: Refreshing state... (ID: 208.91.112.53)
------------------------------------------------------------------------
An execution plan has been generated and is shown below.
Resource actions are indicated with the following symbols:
+ create
~ update in-place
Terraform will perform the following actions:
+ fortios_networking_route_static.test1
id: <computed>
blackhole: "disable"
comment: "Terraform test"
device: "port2"
distance: "22"
dst: "110.2.2.122/32"
gateway: "2.2.2.2"
priority: "3"
weight: "3"
~ fortios_system_setting_dns.test1
primary: "208.91.112.53" => "172.16.95.16"
secondary: "208.91.112.22" => "8.8.8.8"
Plan: 1 to add, 1 to change, 0 to destroy.
------------------------------------------------------------------------
Note: You didn't specify an "-out" parameter to save this plan, so Terraform
can't guarantee that exactly these actions will be performed if
"terraform apply" is subsequently run.
If you are running terraform-provider-fortios 1.1.0, you may see the following error:
Error: Error getting CA Bundle, CA Bundle should be set when
insecure is false.
In this case, add the following line to the FortiOS provider configuration in the test.tf file:
insecure = "true"
9. Enter terraform apply to continue the configuration:
root@mail:/home/terraform# terraform apply
fortios_system_setting_dns.test1: Refreshing state... (ID: 208.91.112.53)
fortios_networking_route_static.test1: Refreshing state... (ID: 2)
An execution plan has been generated and is shown below.
Resource actions are indicated with the following symbols:
+ create
~ update in-place
Terraform will perform the following actions:
+ fortios_networking_route_static.test1
id: <computed>
blackhole: "disable"
comment: "Terraform test"
device: "port2"
distance: "22"
dst: "110.2.2.122/32"
gateway: "2.2.2.2"
priority: "3"
weight: "3"
~ fortios_system_setting_dns.test1
primary: "208.91.112.53" => "172.16.95.16"
secondary: "208.91.112.22" => "8.8.8.8"
FortiOS 6.4.2 Administration Guide 1756
Fortinet Inc.
VM
Plan: 1 to add, 1 to change, 0 to destroy.
Do you want to perform these actions?
Terraform will perform the actions described above.
Only 'yes' will be accepted to approve.
Enter a value: yes
fortios_networking_route_static.test1: Creating...
blackhole: "" => "disable"
comment: "" => "Terraform test"
device: "" => "port2"
distance: "" => "22"
dst: "" => "110.2.2.122/32"
gateway: "" => "2.2.2.2"
priority: "" => "3"
weight: "" => "3"
fortios_system_setting_dns.test1: Modifying... (ID: 208.91.112.53)
primary: "208.91.112.53" => "172.16.95.16"
secondary: "208.91.112.22" => "8.8.8.8"
fortios_networking_route_static.test1: Creation complete after 0s (ID: 2)
fortios_system_setting_dns.test1: Modifications complete after 0s (ID: 172.16.95.16)
Apply complete! Resources: 1 added, 1 changed, 0 destroyed.
The FortiGate is now configured according to the configuration file.
10. To change or delete something in the future, edit the configuration file and then apply it again. In supported cases, it
deletes, adds, or updates new entries as configured. For instance, in this example you can remove the static route
and revert the DNS address to its original configuration by changing the .tf file:
a. Edit the configuration file:
# Configure the FortiOS Provider
provider "fortios" {
hostname = "10.6.30.5"
token = "17b********************63ck"
}
resource "fortios_system_setting_dns" "test1" {
primary = "208.91.112.53"
secondary = "208.91.112.22"
}
#resource "fortios_networking_route_static" "test1" {
# dst = "110.2.2.122/32"
# gateway = "2.2.2.2"
# blackhole = "disable"
# distance = "22"
# weight = "3"
# priority = "3"
# device = "port2"
# comment = "Terraform test"
#}
b. Entering terraform apply deletes the static route that is commented out of the configuration file, and
reverts the DNS address to the old address:
root@mail:/home/terraform# terraform apply
fortios_system_setting_dns.test1: Refreshing state... (ID: 172.16.95.16)
fortios_networking_route_static.test1: Refreshing state... (ID: 2)
An execution plan has been generated and is shown below.
Resource actions are indicated with the following symbols:
~ update in-place
- destroy
FortiOS 6.4.2 Administration Guide 1757
Fortinet Inc.
VM
Terraform will perform the following actions:
- fortios_networking_route_static.test1
~ fortios_system_setting_dns.test1
primary: "172.16.95.16" => "208.91.112.53"
secondary: "8.8.8.8" => "208.91.112.22"
Plan: 0 to add, 1 to change, 1 to destroy.
Do you want to perform these actions?
Terraform will perform the actions described above.
Only 'yes' will be accepted to approve.
Enter a value: yes
fortios_networking_route_static.test1: Destroying... (ID: 2)
fortios_system_setting_dns.test1: Modifying... (ID: 172.16.95.16)
primary: "172.16.95.16" => "208.91.112.53"
secondary: "8.8.8.8" => "208.91.112.22"
fortios_networking_route_static.test1: Destruction complete after 0s
fortios_system_setting_dns.test1: Modifications complete after 0s (ID: 208.91.112.53)
Apply complete! Resources: 0 added, 1 changed, 1 destroyed.
Troubleshooting
Use the HTTPS daemon debug to begin troubleshooting why a configuration was not accepted:
# diagnose debug enable
# diagnose debug application httpsd -1
The REST API 403 error means that your administrator profile does not have sufficient
permissions.
The REST API 401 error means that you do not have the correct token or trusted host.
PF SR-IOV driver support
Physical Function (PF) SR-IOV drivers for i40e and ixgbe interfaces in virtual environments are supported.
PF provides the ability for PCI Passthrough, but requires an entire Network Interface Card (NIC) for a VM. It can usually
achieve greater performance than a Virtual Function (VF) based SR-IOV. PF is also expensive; while VF allows one NIC
to be shared among multiple guests VMs, PF is allocated to one port on a VM.
The supported driver versions are:
l ixgbe: 5.3.7
l ixgbevf: 4.3.5
l i40evfL 3.5.13
l i40e 2.10.19.82
l iavf 3.7.61.20
All tools and software utilities for UEFI 1.X have been removed from 6.2.0 and later releases.
Update to UEFI 2.x to use the UEFI tools or software utilities.
FortiOS 6.4.2 Administration Guide 1758
Fortinet Inc.
VM
Configuration to use PF or VF is done on the hypervisor, and is not configured on the FortiGate.
To check what driver is being used on the FortiGate:
# diagnose hardware deviceinfo nic port2
Name: port2
Driver: i40e
Version: 2.4.10
Bus: 0000:03:00.0
Hwaddr: 3c:fd:fe:1e:98:02
Permanent Hwaddr:3c:fd:fe:1e:98:02
State: up
Link: up
Mtu: 1500
Supported: auto 1000full 10000full
Advertised: auto 1000full 10000full
Auto: disabled
Rx packets: 0
Rx bytes: 0
Rx compressed: 0
...
FortiOS 6.4.2 Administration Guide 1759
Fortinet Inc.
Troubleshooting
Troubleshooting
This section is intended for administrators with super_admin permissions who require assistance with basic and
advanced troubleshooting. Admins with other types of permissions may not be able to perform all of the tasks in this
section.
This section contains the following troubleshooting topics:
l Troubleshooting methodologies on page 1760
l Troubleshooting scenarios on page 1764
l Checking the system date and time on page 1765
l Checking the hardware connections on page 1766
l Checking FortiOS network settings on page 1767
l Troubleshooting CPU and network resources on page 1770
l FortiGuard server settings on page 1804
l Troubleshooting high CPU usage on page 1771
l Checking the modem status on page 1775
l Running ping and traceroute on page 1776
l Checking the logs on page 1780
l Verifying routing table contents in NAT mode on page 1780
l Verifying the correct route is being used on page 1781
l Verifying the correct firewall policy is being used on page 1781
l Checking the bridging information in transparent mode on page 1782
l Checking wireless information on page 1783
l Performing a sniffer trace (CLI and packet capture) on page 1784
l Debugging the packet flow on page 1787
l Testing a proxy operation on page 1790
l Displaying detail Hardware NIC information on page 1790
l Performing a traffic trace on page 1793
l Using a session table on page 1794
l Finding object dependencies on page 1797
l Diagnosing NPU-based interfaces on page 1798
l Identifying the XAUI link used for a specific traffic stream on page 1799
l Running the TAC report on page 1799
l Other commands on page 1800
l FortiGuard troubleshooting on page 1802
l Additional resources on page 1806
Troubleshooting methodologies
The sections in this topic provide an overview of how to prepare to troubleshoot problems in FortiGate. They include
verifiying your user permissions, establishing a baseline, defining the problem, and creating a plan.
FortiOS 6.4.2 Administration Guide 1760
Fortinet Inc.
Troubleshooting
Verify user permissions
Before you begin troubleshooting, verify the following:
l You have administrator privileges for the FortiGate.
l The FortiGate is integrated into your network.
l The operation mode is configured.
l The system time, DNS settings, administrator password, and network interfaces are configured.
l Firmware, FortiGuard AntiVirus, FortiGuard Application Control, and FortiGuard IPS are up to date.
If you are using a FortiGate that has virtual domains (VDOMs) enabled, you can often
troubleshoot within your own VDOM. However, you should inform the super_admin for the
FortiGate that you willl be performing troubleshooting tasks.
You may also need access to other networking equipment, such as switches, routers, and
servers to carry out tests. If you do not have access to this equipment, contact your network
administrator for assistance.
Establish a baseline
FortiGate operates at all layers of the OSI model. For this reason, troubleshooting can be complex. Establishing baseline
parameters for your system before a problem occurs helps to reduce the complexity when you need to troubleshoot.
A best practice is to establish and record the normal operating status. Regular operation data shows trends, and allows
you to see where changes occur when problems arise. You can gather this data by using logs and SNMP tools to
monitor the system performance or by regularly running information gathering commands and saving the output.
You should back up your FortiOS configuration on a regular basis even when you are not
troubleshooting. You can restore the backed up configuration as needed to save time
recreating it from the factory default settings.
Use the following CLI commands to obtain normal operating data for a FortiGate:
get system status Displays firmware versions and FortiGuard engine versions, and
other system information.
get system performance status Displays CPU and memory states, average network usage, average
sessions and session setup rate, viruses caught, IPS attacks blocked,
and uptime.
get hardware memory Displays information about memory.
get system session status Displays total number of sessions.
get router info routing-table all Displays all the routes in the routing table, including their type,
source, and other useful data.
get ips session Displays memory used and maximum amount available to IPS as well
as counts
FortiOS 6.4.2 Administration Guide 1761
Fortinet Inc.
Troubleshooting
get webfilter ftgd-statistics Displays a list of FortiGuard related counts of status, errors, and other
data.
diagnose sys session list Displays the list of current detailed sessions.
show sys dns Displays the configured DNS servers.
diagnose sys ntp status Displays information about NTP servers.
You can run any commands that apply to your system for information gathering. For example, if you have active VPN
connections, use the get vpn series of commands to get more information about them.
Use execute tac report to get an extensive snapshot of your system. This command runs many diagnostic
commands for specific configurations. It also records the current state of each feature regardless of the features
deployed on your FortiGate. If you need to troubleshoot later, you can run the same command again and compare the
differences to identify any suspicious output.
Define the problem
The following questions are intended to compare the current behavior of the FortiGate with normal operations to help
you define the problem. Be specific with your answers. After you define the problem, search for a solution in the
troubleshooting scenarios section, and then create a plan to resolve it.
What is the problem? The problem being observed may not be the actual problem. You should
determine where the problem lies before starting to troubleshoot the FortiGate.
Was the device working If the device never worked, it might be defective. For more information, see
before? Troubleshooting your installation on page 57.
Can the problem be If the problem is intermittent, it may be dependent on system load.
reproduced? Intermittent problems are challenging to troubleshoot because they are difficult to
reproduce.
What has changed? Use the FortiGate event log to identify possible configuration changes.
There may be changes in the operating environment. For example, there might be
a gradual increase in load as more sites are forwarded through the firewall.
If something has changed, roll back the change and assess the impact.
What is the scope of the After you isolate the problem, determine what applications, users, devices, and
problem? operating systems the problem affects.
The following questions are intended to narrow the scope of the problem and
identify what to check during troubleshooting. The more factors you can eliminate,
the less you need to check. For this reason, be as specific and accurate as
possible when gathering information.
l What is not working?
l Is more than one thing not working?
l Is it partly working? If so, what parts are working?
l Is it a connectivity issue for the entire device, or is there an application that
isn’t reaching the Internet?
l Where did the problem occur?
l When did the problem occur and to which users or groups of users?
FortiOS 6.4.2 Administration Guide 1762
Fortinet Inc.
Troubleshooting
l What components are involved?
l What applications are affected?
l Can you use a packet sniffer to trace the problem?
l Can you use system debugging or look in the session table to trace the
problem?
l Do any of the log files indicate a failure has occurred?
Create a troubleshooting plan
After you define the problem and its scope, develop a troubleshooting plan.
Create checklist Make a list all the possible causes of the problem and how you can test for each
cause.
Create a checklist to keep track of what has been tried and what is left to test.
Checklists are useful when more than one person is performing troubleshooting
tasks.
Obtain the required equipment Testing your solution may require additional networking equipment, computers, or
other devices.
Network administrators usually have additional networking equipment available to
loan you, or a lab where you can bring the FortiGate unit to test.
If you do not have access to equipment, check for shareware applications that can
perform the same tasks. Often, there are software solutions you can use when
hardware is too expensive.
Consult Fortinet After the checklist is created, refer to the troubleshooting scenarios sections to
troubleshooting resources assist with implementing your plan. See Troubleshooting scenarios on page
1764.
Gather information for If you still require technical assistance after the plan is implemented, be prepared
technical support to provide Fortinet technical support with following information:
l Firmware build version (use the get system status command)
l Network topology diagram
l Recent configuration file
l Recent debug log (optional)
l Summary of troubleshooting steps you have taken and the results.
Do not provide the output from the exec tac report unless the
support team requests it. The output from this command is very
large and is not required in many cases.
Contact technical support Before contacting technical support, ensure you have login access (preferably
with full read/write privileges) to all networking devices that could be relevant to
troubleshooting.
If you are using VMs, be prepared to have someone who can log in to the virtual
hosting platform in case it is necessary to check and possibly modify resource
allocation.
FortiOS 6.4.2 Administration Guide 1763
Fortinet Inc.
Troubleshooting
For information about contacting technical support, go to FortiCare Support
Service page.
Troubleshooting scenarios
The following table is intended to help you diagnose common problems and provides links to the corresponding
troubleshooting topics:
Problem Probable cause Recommended action
Hardware l Are all of the cables and interfaces Checking the hardware connections on page
connections connected properly? 1766
l Is the LED for the interface green?
FortiOS network l If you are having problems connecting to Checking FortiOS network settings on page
settings the management interface, is your 1767
protocol enabled on the interface for
administrative access?
l Does the interface have an IP address?
CPU and memory l Is the CPU running at almost 100 Troubleshooting CPU and network resources
resources percent usage? on page 1770
l Is your FortiGate running low on
memory?
Modem status l Is the modem connected? Checking the modem status on page 1775
l Are there PPP issues?
Ping and traceroute Is the FortiGate experiencing complete Running ping and traceroute on page 1776
packet loss?
Logs Do you need to identify a problem? Checking the logs on page 1780
Contents of the l Are there routes in the routing table for Verifying routing table contents in NAT mode
routing table (in default and static routes? on page 1780
NAT mode) l Do all connected subnets have a route in
the routing table?
l Does a route have a higher priority than
it should?
Traffic routes Is the traffic routed correctly? Verifying the correct route is being used on
page 1781
Firewall policies Is the correct firewall policy applied to the Verifying the correct firewall policy is being
expected traffic? used on page 1781
Bridging Are you having problems in transparent Checking the bridging information in
information in mode? transparent mode on page 1782
transparent mode
Firewall session l Are there active firewall sessions? Using a session table on page 1794
FortiOS 6.4.2 Administration Guide 1764
Fortinet Inc.
Troubleshooting
Problem Probable cause Recommended action
list
Wireless Network Is the wireless network working properly? Checking wireless information on page 1783
FortiGuard Is the FortiGate communicating properly with Verifying connectivity to FortiGuard on page
connectivity FortiGuard? 1803
Sniffer trace l Is traffic entering the FortiGate? Does Performing a sniffer trace (CLI and packet
the traffic arrive on the expected capture) on page 1784
interface?
l Is the ARP resolution correct for the
next-hop destination?
l Is the traffic exiting the FortiGate to the
destination as expected?
l Is the FortiGate sending traffic back to
the originator?
Packet flow Is traffic entering or leaving the FortiGate as Debugging the packet flow on page 1787
expected?
Checking the system date and time
The system date and time are important for FortiGuard services, logging events, and sending alerts. The wrong time
makes the log entries confusing and difficult to use.
When possible, use Network Time Protocol (NTP) to set the date and time. This is an automatic method that does not
require manual intervention. However, you must ensure that the port is allowed through the firewalls on your network.
FortiToken synchronization requires NTP in many situations.
For information about setting the system date and time, see Setting the system time on page 722.
To view and configure the date and time in the GUI:
1. Go to Dashboard > Status. The date and time are displayed in the System Information widget, next to System Time.
2. Go to System > Settings.
3. In the System Time section, select NTP, and then configure the Time Zone, and Set Time settings as required.
To view the date and time in the CLI:
execute date
execute time
To configure the date and time in the CLI:
Use the set timezone ? command to display a list of timezones and the integers that represent them.
config system global
set timezone <integer>
end
config system ntp
set type custom
FortiOS 6.4.2 Administration Guide 1765
Fortinet Inc.
Troubleshooting
config ntpserver
edit 1
set server “ntp1.fortinet.net”
next
edit 2
set server “ntp2.fortinet.net”
next
end
set ntpsync enable
set syncinterval 60
end
Checking the hardware connections
If traffic is not flowing from the FortiGate, there may be a problem with the hardware connection.
To check hardware connections:
1. Ensure the network cables are plugged into the interfaces.
2. Verify the LED connection lights for the network cables indicate there is a connection. The lights are typically green
when there is a connection.
3. Change the cable when:
l The cable or its connector are damaged.
l You are unsure of the type or quality of the cable, such as straight through or crossover.
l You see exposed wires at the connector.
4. Connect the FortiGate to different hardware.
5. Go to Network > Interfaces to ensure the link status for the interface is set to Up.
The link status is based on the physical connection and cannot be set in FortiOS.
To enable an interface in the GUI:
You should still perform basic software connectivity tests to ensure complete connectivity even if there was a problem
with the hardware connection. The interface might also be disabled, or its Status might be set to Down. See Interfaces on
page 382.
1. Go to Network > Interfaces.
2. Select an interface, such as Port1, and click Edit.
3. In the Miscellaneous area, next to Status, click Enabled.
4. Click OK.
To enable an interface in the CLI:
config system interface
edit port1
set status up
next
end
FortiOS 6.4.2 Administration Guide 1766
Fortinet Inc.
Troubleshooting
Checking FortiOS network settings
Check the FortiOS network settings if you have problems connecting to the management interface. FortiOS network
settings include, interface settings, DNS Settings, and DHCP settings.
Interface settings
If you can access the FortiGate with the management cable only, you can view the interface settings in the GUI.
To view the interface settings in the GUI:
1. Go to Network > Interfaces.
2. Select an interface and click Edit.
3. Check the following interfaces to ensure they are not blocking traffic.
Setting Description
Link Status The status is Up when a valid cable is plugged in. The status is Down when an
invalid cable is plugged in.
The Link Status is shown physically by the connection LED for the interface. If the
LED is green, the connection is good. If Link Status is Down, the interface does not
work.
Link status also appears in the Network > Interfaces page by default.
Addressing mode Do not use DHCP if you do not have a DHCP server. You will not be able to log into
an interface in DHCP mode as it will not have an IP address.
IP/Network Mask An interface requires an IP address to connect to other devices. Ensure there is a
valid IP address in this field. The one exception is when DHCP is enabled for this
interface to get its IP address from an external DHCP server.
IPv6 address The same protocol must be used by both ends to complete the connection. Ensure
this interface and the remote connection are both using IPv4 or both are using IPv6
addresses.
Administrative access If no protocols are selected, you will have to use the local management cable to
connect to the unit. If you are using IPv6, configure the IPv6 administrative access
protocols.
Status Ensure the status is set to Up or the interface will not work.
To display the internal interface settings in the CLI:
FGT# show system interface <interface_name>
To view the list of possible interface settings:
config system interface
edit <interface_name>
get
end
FortiOS 6.4.2 Administration Guide 1767
Fortinet Inc.
Troubleshooting
DNS settings
To view DNS settings in the GUI:
Go to Network > DNS.
You can trace many networking problems back to DNS issues. Check the following items:
1. Are there values for both the Primary DNS server and Secondary DNS server fields.
2. Is the Local Domain Name correct?
3. Are you using IPv6 addressing? If so, are the IPv6 DNS settings correct?
4. Are you using Dynamic DNS (DDNS)? If so, is it using the correct server, credentials, and interface?
5. Can you contact both DNS servers to verify the servers are operational?
6. If an interface addressing mode is set to DHCP and is set to override the internal DNS, is that interface receiving a
valid DNS entry from the DHCP server? Is it a reasonable address and can it be contacted to verify it is operational?
7. Are there any DENY security policies that need to allow DNS?
8. Can any internal device perform a successful traceroute to a location using the FQDN?
DHCP server settings
DHCP servers are common on internal and wireless networks. The DHCP server will cause problems if it is not
configured correctly.
To view DHCP server settings in the GUI:
1. Go to Network > Interfaces.
2. Select an interface, and click Edit.
Check the following items:
1. Is the DHCP server enabled?
2. Is the DHCP server entry set to Relay? If so, verify there is another DHCP server to which requests can be relayed.
Otherwise, set it to Server.
3. Does the DHCP server use a valid IP address range? Are other devices using the addresses? If one or more
devices are using IP addresses in this range, you can use the IP reservation feature to ensure the DHCP server
does not use these addresses. See DHCP server on page 484
4. Is there a gateway entry? If not, add a gateway entry to ensure that the server's clients have a default route.
5. Is the system DNS setting being used? A best practice is to avoid confusion by using the system DNS whenever
possible. However, you can specify up to three custom DNS servers, and you should use all three entries for
redundancy.
There are some situations, such as a new wireless interface, or during the initial FortiGate
configuration, where interfaces override the system DNS entries. When this happens, it often
shows up as intermittent Internet connectivity.
To fix the problem, go to Network > DNS, and enable Use FortiGuard Servers.
FortiOS 6.4.2 Administration Guide 1768
Fortinet Inc.
Troubleshooting
Checking CPU and memory resources
Check the CPU and memory resources when the FortiGate is not working, the network is slow, or there is a reduced
firewall session setup rate. All processes share the system resources in FortiOS, including CPU and memory.
To view system resources in the GUI:
Go to Dashboard > Status.
The resource information is located in the CPU and Memory widgets. For information, see Dashboards and widgets on
page 63.
To view system resources in the CLI:
get system performance status
Sample output:
FGT# get system performance status
CPU states: 0% user 0% system 0% nice 100% idle 0% iowait 0% irq 0% softirq
CPU0 states: 0% user 0% system 0% nice 100% idle 0% iowait 0% irq 0% softirq
CPU1 states: 0% user 0% system 0% nice 100% idle 0% iowait 0% irq 0% softirq
CPU2 states: 0% user 0% system 0% nice 100% idle 0% iowait 0% irq 0% softirq
CPU3 states: 0% user 0% system 0% nice 100% idle 0% iowait 0% irq 0% softirq
Memory: 4050332k total, 527148k used (13%), 3381312k free (83%), 141872k freeable (3%)
Average network usage: 41 / 28 kbps in 1 minute, 54 / 44 kbps in 10 minutes, 42 / 34 kbps
in 30 minutes
Average sessions: 33 sessions in 1 minute, 48 sessions in 10 minutes, 38 sessions in 30
minutes
Average session setup rate: 0 sessions per second in last 1 minute, 0 sessions per second
in last 10 minutes, 0 sessions per second in last 30 minutes
Virus caught: 0 total in 1 minute
IPS attacks blocked: 0 total in 1 minute
Uptime: 0 days, 22 hours, 59 minutes
The first line of the output shows the CPU usage by category:
CPU states: 0% user 0% system 0% nice 100% idle 0% iowait 0% irq 0% softirq
The second line of the output shows the memory usage:
Memory: 4050332k total, 527148k used (13%), 3381312k free (83%), 141872k freeable (3%)
Memory usage should not exceed 90%. Using too much memory prevents some processes from functioning properly.
For example, if the system is running low on memory, antivirus scanning enters into failopen mode where it drops
connections or bypasses the antivirus system.
Other lines of output, such as average network usage, average session setup rate, viruses caught,
and IPS attacks blocked, help determine why system resource usage is high.
For example:
l A high average network usage may indicate high traffic processing on the FortiGate,
l A very low or zero, average session setup rate may indicate the proxy is overloaded and unable to do its
job.
FortiOS 6.4.2 Administration Guide 1769
Fortinet Inc.
Troubleshooting
Troubleshooting CPU and network resources
FortiGate has stopped working
If the FortiGate has stopped working, the first line of the output will look similar to this:
CPU states: 0% user 0% system 0% nice 100% idle
Network is slow
If your network is running slow, the first line of the output will look similar to this:
CPU states: 1% user 98% system 0% nice 1% idle
This example shows that all of the CPU is being used by system processes, and the FortiGate is overloaded. When
overloading occurs, it is possible a process such as scanunitid is using all the resources to scan traffic. In this case
you need to reduce the amount of traffic being scanned by blocking unwanted protocols, configuring more security
policies to limit scanning to certain protocols, or similar actions.
It is also possible a hacker has accessed your network and is overloading it with malicious activity, such as running a
spam server or using zombie PCs to attack other networks on the Internet.
You can use the following command to investigate the problem with the CPU:
get system performance top
This command shows all of the top processes that are running on the FortiGate and their CPU usage. The process
names are on the left. If a process is using most of the CPU cycles, investigate it to determine whether the activity is
normal.
Reduced firewall session setup rate
A reduced firewall session setup rate can be caused by a lack of system resources on the FortiGate, or reaching the
session count limit for a VDOM.
As a best practice, administrators should record the session setup rate during normal
operation to establish a baseline to help define a problem when your are troubleshooting.
The session setup rate appears in the average sessions section of the output.
A reduced firewall session setup rate will look similar to this:
Average sessions: 80 sessions in 1 minute, 30 sessions in 10 minutes, 42 sessions in 30
minutes
Average session setup rate: 3 sessions per second in last 1 minute, 0 sessions per second in
last 10 minutes, 0 sessions per second in last 30 minutes
In the example above, there were 80 sessions in 1 minute, or an average of 3 sessions per second.
The values for 10 minutes and 30 minutes allow you to take a longer average for a more reliable value if your
FortiGate is working at maximum capacity. The smallest FortiGate can have 1,000 sessions established per second
across the unit.
FortiOS 6.4.2 Administration Guide 1770
Fortinet Inc.
Troubleshooting
The session setup rate is a global command. If you have multiple VDOMs configured with
many sessions in each VDOM, the session setup rate per VDOM will be slower than if there
are no VDOMs configured.
High memory usage
As with any system, a FortiGate has limited hardware resources, such as memory, and all processes running on the
FortiGate share the memory. Each process uses more or less memory, depending on its workload. For example, a
process usually uses more memory in high traffic situations. If some processes use all of the available memory, other
processes will not be able to run.
When high memory usage occurs, the services may freeze up, connections may be lost, or new connections may be
refused.
If you see high memory usage in the Memory widget, the FotiGate may be handling high traffic volumes. Alternatively,
the FortiGate may have problems with connection pool limits that are affecting a single proxy. If the FortiGate receives
large volumes of traffic on a specific proxy, the unit may exceed the connection pool limit. If the number of free
connections within a proxy connection pool reaches zero, issues may occur.
To view current memory usage information in the CLI:
diagnose hardware sysinfo memory
Sample output:
total: used: free: shared: buffers: cached: shm:
Mem: 2074185728 756936704 1317249024 0 20701184 194555904 161046528
Swap: 0 0 0
MemTotal: 2025572 kB
MemFree: 1286376 kB
MemShared: 0 kB
Buffers: 20216 kB
Cached: 189996 kB
SwapCached: 0 kB
Active: 56644 kB
Inactive: 153648 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 2025572 kB
LowFree: 1286376 kB
SwapTotal: 0 kB
SwapFree: 0 kB
Troubleshooting high CPU usage
Connection-related problems may occur when FortiGate's CPU resources are over extended. This occurs when you
deploy too many FortiOS features at the same time.
FortiOS 6.4.2 Administration Guide 1771
Fortinet Inc.
Troubleshooting
Examples of CPU intensive features:
l VPN high-level encryption
l Intensive scanning of all traffic
l Logging all traffic and packets
l Dashboard widgets that frequently perform data updates
For information on customizing the CPU use threshold, see Execute a CLI script based on CPU and memory thresholds
on page 358.
Determining the current level of CPU usage
You can view CPU usage levels in the GUI or CLI. For precise usage values for both overall usage and specific
processes, use the CLI.
To view CPU usage in the GUI:
Go to Dashboard > Status. Real-time CPU usage information is located in the CPU widget.
To view CPU usage in the CLI:
l Show top processes information:
diagnose sys top
l Show top threads information:
diagnose sys top-all
Sample output:
Run Time: 86 days, 0 hours and 10 minutes
0U, 0N, 0S, 100I, 0WA, 0HI, 0SI, 0ST; 3040T, 2437F
bcm.user 93 S < 3.1 0.4
httpsd 18922 S 1.5 0.5
httpsd 19150 S 0.3 0.5
newcli 20195 R 0.1 0.1
cmdbsvr 115 S 0.0 0.8
pyfcgid 20107 S 0.0 0.6
forticron 146 S 0.0 0.5
httpsd 139 S 0.0 0.5
cw_acd 166 S 0.0 0.5
miglogd 136 S 0.0 0.5
pyfcgid 20110 S 0.0 0.4
pyfcgid 20111 S 0.0 0.4
pyfcgid 20109 S 0.0 0.4
httpsd 20192 S 0.0 0.4
miglogd 174 S 0.0 0.4
miglogd 175 S 0.0 0.4
fgfmd 165 S 0.0 0.3
newcli 20191 S 0.0 0.3
initXXXXXXXXXXX 1 S 0.0 0.3
httpsd 184 s 0.0 0.3
The following table explains the codes in the second line of the output:
FortiOS 6.4.2 Administration Guide 1772
Fortinet Inc.
Troubleshooting
Code Description
U Percentage of user space applications that are currently using the CPU
N Percentage of time that the CPU spent on low priority processes since the last shutdown
S Percentage of system processes (or kernel processes) that are using the CPU
I Percentage of idle CPU resources
WA Percentage of time that the CPU spent waiting on IO peripherals since the last shutdown
HI Percentage of time that the CPU spent handling hardware interrupt routines since the last shutdown
SI Percentage of time that the CPU spent handling software interrupt routines since the last shutdown
ST Steal time: Percentage of time a virtual CPU waits for the physical CPU when the hypervisor is
servicing another virtual processor
T Total FortiOS system memory in MB
F Free memory in MB
Each additional line of the command output displays information specific to processes or threads that are running on the
FortiGate unit. For example, the sixth line of the output is: newcli 20195 R 0.1 0.1
The following table describes the data in the sixth line of the output:
Item Description
newcli The process (or thread) name.
Duplicate process or thread names indicate that separate instances of that process or thread are
running.
20195 The process or thread ID, which can be any number.
R Current state of the process or thread. The process or thread state can be:
l R - running
l S - sleep
l Z - zombie
l D- disk sleep
0.1 The percentage of CPU capacity that the process or thread is using.
CPU usage can range from 0.0 for a process or thread that is sleeping to higher values for a process
or thread that's taking a lot of CPU time.
0.1 The amount of memory that the process or thread is using.
Memory usage can range from 0.1 to 5.5 and higher.
You can use the following single-key commands when running diagnose sys top or diagnose sys top-all:
l q to quit and return to the normal CLI prompt.
l p to sort the processes by the amount of CPU that the processes are using.
l m to sort the processes by the amount of memory that the processes are using.
FortiOS 6.4.2 Administration Guide 1773
Fortinet Inc.
Troubleshooting
The output only displays the top processes or threads that are running. For example, if 20 are listed, they are the top 20
currently running, sorted by either CPU or memory usage. You can configure the number of processes or threads
displayed, using the following CLI commands:
diagnose sys top <integer_seconds> <integer_maximum_lines>
diagnose sys top-all <integer_seconds> <integer_maximum_lines>
Where:
l <integer_seconds> is the delay in seconds (default is 5)
l <integer_maximum_lines> is the maximum number of lines (or processes) to list (default is 20)
Determining which features are using the most CPU resources
You can use the CLI to view the top few processes that are currently running and using the most CPU resources.
To view processes using the most CPU resources:
get system performance top
The entries at the top are using the most CPU resources. The second column from the right shows CPU usage by
percentage. Note which processes are using the most resources and try to reduce their CPU load.
Processes you will see include:
l ipsengine: the IPS engine that scans traffic for intrusions
l scanunitd: antivirus scanner
l httpsd: secure HTTP
l iked: internet key exchange (IKE) in use with IPsec VPN tunnels
l newcli: active whenever you're accessing the CLI
l sshd: there are active secure socket connections
l cmdbsrv: the command database server application
Go to the features that are at the top of the list and look for evidence of CPU overuse. Generally, the monitor for a feature
is a good place to start.
Checking for unnecessary CPU “wasters”
These are some best practices that will reduce your CPU usage, even if the FortiGate is not experiencing high CPU
usage. Note that if the following information instructs you to turn off a feature that you require, disregard that part of the
instructions.
l Use hardware acceleration wherever possible to offload tasks from the CPU. Offloading tasks, such as encryption,
frees up the CPU for other tasks.
l Avoid the use of GUI widgets that require computing cycles, such as the Top Sessions widget. These widgets
constantly pol the system for information, which uses CPU and other resources.
l Schedule antivirus, IPS, and firmware updates during off-peak hours. These updates do not usually consume CPU
resources but they can disrupt normal operation.
l Check the log levels and which events are being logged. This is the severity of the messages that are recorded.
Consider going up one level to reduce the amount of logging. Also, if there are events you do not need to monitor,
remove them from the list.
FortiOS 6.4.2 Administration Guide 1774
Fortinet Inc.
Troubleshooting
l Log to FortiCloud instead of logging to memory or disk. Logging to memory quickly uses up resources and logging
to local disk impacts overall performance and reduces the lifetime of the unit.
Fortinet recommends logging to FortiCloud to avoid using too much CPU.
l If the disk is almost full, transfer the logs or data off the disk to free up space. When a disk is almost full it consumes
a lot of resources to find free space and organize the files.
l If packet logging is enabled on the FortiGate, consider disabling it. When packet logging is enabled, it records every
packet that comes through that policy.
l Halt all sniffers and traces.
l Ensure the FortiGate isn't scanning traffic twice. Traffic does not need to be rescanned if it enters the FortiGate on
one interface, goes out another, and then comes back in again. Doing so is a waste of resources. However, ensure
that traffic truly is being scanned once.
l Reduce the session timers to close unused sessions faster. Enter the following CLI commands, which reduce the
default values. Note that, by default, the system adds 10 seconds to tcp-timewait.
config system global
set tcp-halfclose-timer 30
set tcp-halfopen-timer 30
set tcp-timewait-timer 0
set udp-idle-timer 60
end
l Go to System > Feature Visibility, and enable only features that you need.
SNMP monitoring
When CPU usage is under control, use SNMP to monitor CPU usage. Alternatively, use logging to record CPU and
memory usage every 5 minutes.
Once the system is back to normal, you should set up a warning system that sends alerts when CPU resources are used
excessively. A common method to do this is using SNMP. SNMP monitors many values in FortiOS and allows you to set
high water marks that generate events. You can run an application on your computer to watch for and record these
events.
To enable SNMP:
1. Go to System > SNMP.
2. Configure an SNMP community.
See SNMP on page 791.
You can use the System Resources widget to record CPU usage if SNMP is too complicated.
However, the widget only records problems as they happen and will not send you alerts for
problems.
Checking the modem status
You can use the CLI to troubleshoot a modem that is not working properly, or troubleshoot a FortiGate that does not
detect the modem.
To diagnose modem issues in the CLI:
diagnose sys modem {cmd | com | detect | history | external-modem | query| reset}
FortiOS 6.4.2 Administration Guide 1775
Fortinet Inc.
Troubleshooting
You should always run the following command after you connect a USB modem to FortiGate:
diagnose sys modem detect
Use the following command to view the modem's configuration, vendor and custom product identification number:
get system modem
Use the following commands to resolve connectivity issues:
l diagnose debug enable: Activates the debug on the console
l diagnose debug application modemd: Dumps communication between the modem and the unit.
l diagnose debug application ppp: Dumps the PPP negotiating messages.
l execute modem dial: Displays modem debug output.
The modem diagnose output should not contain errors when initializing. You should also verify the number used to dial
into your ISP.
Running ping and traceroute
Ping and traceroute are useful tools in network troubleshooting. Alone, either tool can determine network connectivity
between two points. However, ping can be used to generate simple network traffic that you can view using diagnose
commands in FortiGate. This combination can be very powerful when you are trying to locate network problems.
Ping and traceroute can also tell you if your computer or network device has access to a domain name server (DNS).
Both tools can use IP addresses or device domain names to determine why particular services, such as email or web
browsing, may not work properly.
If ping does not work, it may be disabled on at least one of the interface settings and security
policies for that interface.
Both ping and traceroute require particular ports to be open on firewalls to function. Since you typically use these tools to
troubleshoot, you can allow them in the security policies and on interfaces only when you need them. Otherwise, keep
the ports disabled for added security.
Ping
The ping command sends a very small packet to a destination, and waits for a response. The response has a timer that
expires when the destination is unreachable.
Ping is part of layer 3 on the OSI Networking Model. Ping sends Internet Control Message Protocol (ICMP) “echo
request” packets to the destination, and listens for “echo response” packets in reply. However, many public networks
block ICMP packets because ping can be used in a denial of service (DoS) attack (such as Ping of Death or a smurf
attack), or by an attacker to find active locations on the network. By default, FortiGate units have ping enabled while
broadcast-forward is disabled on the external interface.
What ping can tell you
Beyond the basic connectivity information, ping can tell you the amount of packet loss (if any), how long it takes the
packet to make the round trip, and the variation in that time from packet to packet.
If packet loss is detected, you should investigate the following:
FortiOS 6.4.2 Administration Guide 1776
Fortinet Inc.
Troubleshooting
l Possible ECMP, split horizon, or network loops.
l Cabling, to ensure there are no loose connections.
l Verify which security policy was used. To do this:
Go to Policy & Objects > Firewall Policy and view the packet count column.
If there is total packet loss, you should investigate the following:
1. Ensure cabling is correct, and all equipment between the two locations is accounted for.
2. Ensure all IP addresses and routing information along the route is configured as expected.
3. Ensure all firewalls, including FortiGate security policies allow PING to pass through.
How to use ping
Ping syntax is the same for nearly every type of system on a network.
To ping from a FortiGate unit:
1. Go to Dashboad, and connect to the CLI through either telnet or the CLI widget.
2. Enter exec ping 10.11.101.101 to send 5 ping packets to the destination IP address. There are no options for
this command.
Sample output:
Head_Office_620b # exec ping 10.11.101.101
PING 10.11.101.101 (10.11.101.101): 56 data bytes
64 bytes from 10.11.101.101: icmp_seq=0 ttl=255 time=0.3 ms
64 bytes from 10.11.101.101: icmp_seq=1 ttl=255 time=0.2 ms
64 bytes from 10.11.101.101: icmp_seq=2 ttl=255 time=0.2 ms
64 bytes from 10.11.101.101: icmp_seq=3 ttl=255 time=0.2 ms
64 bytes from 10.11.101.101: icmp_seq=4 ttl=255 time=0.2 ms
--- 10.11.101.101 ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 0.2/0.2/0.3 ms
To ping from a Microsoft Windows PC:
1. Open a command window.
2. Enter ping 10.11.101.100 to ping the default internal interface of the FortiGate with four packets.
Other options include:
l -t to send packets until you press Ctrl+C
l -a to resolve addresses to domain names where possible
l -n X to send X ping packets and stop
Sample output:
C:\>ping 10.11.101.101
Pinging 10.11.101.101 with 32 bytes of data:
Reply from 10.11.101.101: bytes=32 time=10ms TTL=255
Reply from 10.11.101.101: bytes=32 time<1ms TTL=255
Reply from 10.11.101.101: bytes=32 time=1ms TTL=255
Reply from 10.11.101.101: bytes=32 time=1ms TTL=255
FortiOS 6.4.2 Administration Guide 1777
Fortinet Inc.
Troubleshooting
Ping statistics for 10.11.101.101:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 10ms, Average = 3ms
To ping from a Linux PC:
1. Go to a shell prompt.
2. Enter “ping 10.11.101.101”.
Traceroute
Where ping will only tell you if it reached its destination and returned successfully, traceroute shows each step of the
journey to its destination and how long each step takes. If ping finds an outage between two points, you can use
traceroute to locate exactly where the problem is.
Traceroute works by sending ICMP packets to test each hop along the route. It sends three packets, and then increases
the time to live (TTL) setting by one each time. This effectively allows the packets to go one hop farther along the route.
This is why most traceroute commands display their maximum hop count before they start tracing the route, which is the
maximum number of steps it takes before it declares the destination unreachable. Also, the TTL setting may result in
steps along the route timing out due to slow responses. There are many possible reasons for this to occur.
By default, traceroute uses UDP datagrams with destination ports numbered from 33434 to 33534. The traceroute utility
may also offer the option to select use of ICMP echo request (type 8) instead, which the Windows tracert utility uses. If
you must, allow both protocols inbound through the FortiGate security policies (UDP with ports from 33434 to 33534 and
ICMP type 8).
To track traceroute packets in the GUI:
Go to Policy & Objects > Firewall Policy and view the packet count column.
This allows you to verify the connection and confirm which security policy the traceroute packets are using.
What traceroute can tell you
Both ping and traceroute verify connectivity between two points. However, only traceroute shows you each step in the
connection path. Also, ping and traceroute use different protocols and ports, so one may succeed where the other fails.
You can verify your DNS connection using traceroute. If you enter an FQDN instead of an IP address for the traceroute,
DNS tries to resolve that domain name. If the name isn't resolved, you have DNS issues.
Using traceroute
The traceroute command varies slightly between operating systems. In Microsoft Windows, the command name is
shortened to “tracert”. Also, your output lists different domain names and IP addresses along your route.
To use traceroute on a Microsoft Windows PC:
1. Open a command window.
2. Enter tracert fortinet.com to trace the route from the PC to the Fortinet web site.
FortiOS 6.4.2 Administration Guide 1778
Fortinet Inc.
Troubleshooting
Sample output:
C:\>tracert fortinet.com
Tracing route to fortinet.com [208.70.202.225]
over a maximum of 30 hops:
1 <1 ms <1 ms <1 ms 172.20.120.2
2 66 ms 24 ms 31 ms 209-87-254-xxx.storm.ca [209.87.254.221]
3 52 ms 22 ms 18 ms core-2-g0-0-1104.storm.ca [209.87.239.129]
4 43 ms 36 ms 27 ms core-3-g0-0-1185.storm.ca [209.87.239.222]
5 46 ms 21 ms 16 ms te3-x.1156.mpd01.cogentco.com [38.104.158.69]
6 25 ms 45 ms 53 ms te8-7.mpd01.cogentco.com [154.54.27.249]
7 89 ms 70 ms 36 ms te3-x.mpd01.cogentco.com [154.54.6.206]
8 55 ms 77 ms 58 ms sl-st30-chi-.sprintlink.net [144.232.9.69]
9 53 ms 58 ms 46 ms sl-0-3-3-x.sprintlink.net [144.232.19.181]
10 82 ms 90 ms 75 ms sl-x-12-0-1.sprintlink.net [144.232.20.61]
11 122 ms 123 ms 132 ms sl-0-x-0-3.sprintlink.net [144.232.18.150]
12 129 ms 119 ms 139 ms 144.232.20.7
13 172 ms 164 ms 243 ms sl-321313-0.sprintlink.net [144.223.243.58]
14 99 ms 94 ms 93 ms 203.78.181.18
15 108 ms 102 ms 89 ms 203.78.176.2
16 98 ms 95 ms 97 ms 208.70.202.225
The first column on the left is the hop count, which can't exceed 30 hops. When that number is reached, the traceroute
ends.
The second, third, and fourth columns display how much time each of the three packets takes to reach this stage of the
route. These values are in milliseconds and normally vary quite a bit. Typically a value of <1ms indicates a local
connection.
The fifth column (farthest to the right) shows the domain name of the device and its IP address, or possibly only the IP
address.
To perform a traceroute on a Linux PC:
1. Go to a command line prompt.
2. Enter “traceroute fortinet.com”.
The Linux traceroute output is very similar to the MicroSoft Windows tracert output.
To trace a route from a FortiGate to a destination IP address in the CLI:
# execute traceroute www.fortinet.com
traceroute to www.fortinet.com (66.171.121.34), 32 hops max, 84 byte packets
1 172.20.120.2 0.637 ms 0.653 ms 0.279 ms
2 209.87.254.221 <static-209-87-254-221.storm.ca> 2.448 ms 2.519 ms 2.458 ms
3 209.87.239.129 <core-2-g0-2.storm.ca> 2.917 ms 2.828 ms 9.324 ms
4 209.87.239.199 <core-3-bdi1739.storm.ca> 13.248 ms 12.401 ms 13.009 ms
5 216.66.41.113 <v502.core1.tor1.he.net> 17.181 ms 12.422 ms 12.268 ms
6 184.105.80.9 <100ge1-2.core1.nyc4.he.net> 21.355 ms 21.518 ms 21.597 ms
7 198.32.118.41 <ny-paix-gni.twgate.net> 83.297 ms 84.416 ms 83.782 ms
8 203.160.228.217 <217-228-160-203.TWGATE-IP.twgate.net> 82.579 ms 82.187 ms 82.066 ms
9 203.160.228.229 <229-228-160-203.TWGATE-IP.twgate.net> 82.055 ms 82.455 ms 81.808 ms
10 203.78.181.2 82.262 ms 81.572 ms 82.015 ms
11 203.78.186.70 83.283 ms 83.243 ms 83.293 ms
12 66.171.127.177 84.030 ms 84.229 ms 83.550 ms
FortiOS 6.4.2 Administration Guide 1779
Fortinet Inc.
Troubleshooting
13 66.171.121.34 <www.fortinet.com> 84.023 ms 83.903 ms 84.032 ms
14 66.171.121.34 <www.fortinet.com> 83.874 ms 84.084 ms 83.810 ms
Checking the logs
A log message records the traffic passing through FortiGate to your network and the action FortiGate takes when it
scans the traffic. You should log as much information as possible when you first configure FortiOS. If FortiGate logs are
too large, you can turn off or scale back the logging for features that are not in use.
It is difficult to troubleshoot logs without a baseline. Before you can determine if the logs indicate a problem, you need to
know what logs result from normal operation.
When troubleshooting with log files
l Compare current logs to a recorded baseline of normal operation.
l If you need to, increase the level of logging (such as from Warning to Information) to obtain more information.
When increasing logging levels, ensure that you configure email alerts and select both disk usage and log quota.
This ensures that you will be notified if the increase in logging causes problems.
To configure the log settings in the GUI:
Go to Log & Report > Log Settings.
Determine the activities that generate the most log entries:
l Check all logs to ensure important information is not overlooked.
l Filter or order log entries based on different fields, such as level, service, or IP address, to look for patterns that may
indicate a specific problem, such as frequent blocked connections on a specific port for all IP addresses.
Logs can help identify and locate any problems, but they do not solve them. The purpose of logs is to speed up your
problem solving and save you time and effort.
For more information about logging and log reports, see Log and Report on page 1695.
Verifying routing table contents in NAT mode
Verify the contents of the routing table when a FortiGate has limited or no connectivity.
The routing table stores the routes currently in use for both static and dynamic protocols. Storing a route in the routing
table saves time and resources performing a lookup. To ensure the most recently used routes remain in the table, old
routes are bumped to make room for new ones. You cannot perform this task when FortiGate is in transparent mode.
If FortiGate is running in NAT mode, verify that all desired routes are in the routing table, including local subnets, default
routes, specific static routes, and dynamic routing protocols.
To view the routing table in the CLI:
get router info routing-table all
Sample output:
FGT# get router info routing-table all
Codes:
FortiOS 6.4.2 Administration Guide 1780
Fortinet Inc.
Troubleshooting
K - kernel, C - connected, S - static, R - RIP, B - BGP
O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default
S* 0.0.0.0/0 [10/0] via 172.20.120.2, wan1
C 10.31.101.0/24 is directly connected, internal
C 172.20.120.0/24 is directly connected, wan1
Verifying the correct route is being used
Run a trace route from a machine in the local area network (LAN) to ensure traffic is flowing as expected through the
correct route when there is more than one default route.
In the following example output:
l The first hop contains the IP address 10.10.1.99, which is the internal interface of the FortiGate.
l The second hop contains the IP address 172.20.120.2, to which the wan1 interface of the FortiGate is
connected.
This means the route through the wan1 interface is being used for this traffic.
C:\>tracert www.fortinet.com
Tracing route to www.fortinet.com [66.171.121.34]
over a maximum of 30 hops:
1 <1 ms <1 ms <1 ms 10.10.1.99
2 1 ms <1 ms <1 ms 172.20.120.2
3 3 ms 3 ms 3 ms static-209-87-254-221.storm.ca [209.87.254.221]
4 3 ms 3 ms 3 ms core-2-g0-2.storm.ca [209.87.239.129]
5 13 ms 13 ms 13 ms core-3-bdi1739.storm.ca [209.87.239.199]
6 12 ms 19 ms 11 ms v502.core1.tor1.he.net [216.66.41.113]
7 22 ms 22 ms 21 ms 100ge1-2.core1.nyc4.he.net [184.105.80.9]
8 84 ms 84 ms 84 ms ny-paix-gni.twgate.net [198.32.118.41]
9 82 ms 84 ms 82 ms 217-228-160-203.TWGATE-IP.twgate.net [203.160.22
8.217]
10 82 ms 81 ms 82 ms 229-228-160-203.TWGATE-IP.twgate.net [203.160.22
8.229]
11 82 ms 82 ms 82 ms 203.78.181.2
12 84 ms 83 ms 83 ms 203.78.186.70
13 84 ms * 85 ms 66.171.127.177
14 84 ms 84 ms 84 ms fortinet.com [66.171.121.34]
15 84 ms 84 ms 83 ms fortinet.com [66.171.121.34]
You can also see the route taken for each session by debugging the packet flow in the CLI. For more information, see
Debugging the packet flow on page 1787.
Verifying the correct firewall policy is being used
If you have more than one firewall policy, you can check which policy is being used in the Policy & Objects module in the
GUI.
FortiOS 6.4.2 Administration Guide 1781
Fortinet Inc.
Troubleshooting
To verify the firewall policy in the GUI:
1. Go to Policy & Objects > Firewall Policy.
2. Look in the Count column to see which policy is being used. The count must show traffic increasing.
Debugging the packet flow in the CLI shows the policy ID that's allowing the traffic. For information, see Debugging the
packet flow on page 1787.
Checking the bridging information in transparent mode
Checking the bridging information is useful when you are experiencing connectivity problems. When FortiGate is set to
transparent mode, it acts like a bridge and sends all incoming traffic out on the other interfaces. Each bridge is a link
between interfaces.
When traffic is flowing between the interfaces, you can see the bridges listed in the CLI. If no bridges are listed, this is the
likely cause of the connectivity issue. When investigating bridging information, check for the MAC address of the
interface or device in question.
How to check the bridging information
To view the list of bridge instances in the CLI:
diagnose netlink brctl list
Sample output:
#diagnose netlink brctl list
list bridge information
1. root.b fdb: size=256 used=6 num=7 depth=2 simple=no
Total 1 bridges
How to display forwarding domain information
You can use forwarding domains, or collision domains, in routing to limit where packets are forwarded on the network.
Layer 2 broadcasts are limited to the same group. By default, all interfaces are in group 0. For example, if the FortiGate
has 12 interfaces, only two may be in the same forwarding domain, which limits packets that are broadcast to those two
interfaces. This reduces traffic on the rest of the network.
Collision domains prevent the forwarding of ARP packets to all VLANs on an interface. Without collision domains,
duplicate MAC addresses on VLANs may cause ARP packets to be duplicated. Duplicate ARP packets can cause some
switches to reset. It's important to know what interfaces are part of which forwarding domains because this determines
which interfaces can communicate with each other.
To manually configure forwarding domains in transparent mode in the CLI:
config system interface
edit <interface_name>
set forward-domain <integer>
end
FortiOS 6.4.2 Administration Guide 1782
Fortinet Inc.
Troubleshooting
To display the forward domains information in the CLI:
diagnose netlink brctl domain <name> <id>
Where <name> is the name of the forwarding domain to display and <id> is the domain ID.
Sample output:
diagnose netlink brctl domain ione 101
show bridge root.b ione forward domain.
id=101 dev=trunk_1 6
To list the existing bridge MAC table in the CLI:
diagnose netlink brctl name host <name>
Sample output:
show bridge control interface root.b host.
fdb: size=256, used=6, num=7, depth=2, simple=no
Bridge root.b host table
port no device devname mac addr ttl attributes
2 7 wan2 02:09:0f:78:69:00 0 Local Static
5 6 vlan_1 02:09:0f:78:69:01 0 Local Static
3 8 dmz 02:09:0f:78:69:01 0 Local Static
4 9 internal 02:09:0f:78:69:02 0 Local Static
3 8 dmz 00:80:c8:39:87:5a 194
4 9 internal 02:09:0f:78:67:68 8
1 3 wan1 00:09:0f:78:69:fe 0 Local Static
To list the existing bridge port list in the CLI:
diagnose netlink brctl name port <name>
Sample output:
show bridge root.b data port.
trunk_1 peer_dev=0
internal peer_dev=0
dmz peer_dev=0
wan2 peer_dev=0
wan1 peer_dev=0
Checking wireless information
Check wireless connections, stations, and interfaces when the problem is not caused by a physical interface.
FortiOS 6.4.2 Administration Guide 1783
Fortinet Inc.
Troubleshooting
Troubleshooting station connection issues
To check if a station entry is created on access control in the CLI:
FG600B3909600253 # diagnose wireless-controller wlac -d sta
* vf=0 wtp=70 rId=2 wlan=open ip=0.0.0.0 mac=00:09:0f:db:c4:03 rssi=0 idle=148 bw=0 use=2
vf=0 wtp=70 rId=2 wlan=open ip=172.30.32.122 mac=00:25:9c:e0:47:88 rssi=-40 idle=0 bw=9
use=2
Enabling diagnostics for a specific station
This example uses the station MAC address to find where it is failing:
FG600B3909600253 # diagnose wireless-controller wlac sta_filter 00:25:9c:e0:47:88 1
Set filter sta 00:25:9c:e0:47:88 level 1
FG600B3909600253 # 71419.245 <ih> IEEE 802.11 mgmt::disassoc <== 00:25:9c:e0:47:88 vap open
rId 1 wId 0 00:09:0f:db:c4:03
71419.246 <dc> STA del 00:25:9c:e0:47:88 vap open rId 1 wId 0
71419.246 <cc> STA_CFG_REQ(34) sta 00:25:9c:e0:47:88 del ==> ws (0-192.168.35.1:5246) rId 1
wId 0
71419.246 <cc> STA del 00:25:9c:e0:47:88 vap open ws (0-192.168.35.1:5246) rId 1 wId 0
00:09:0f:db:c4:03 sec open reason I2C_STA_DEL
71419.247 <cc> STA_CFG_RESP(34) 00:25:9c:e0:47:88 <== ws (0-192.168.35.1:5246) rc 0
(Success).
Performing a sniffer trace (CLI and packet capture)
When you troubleshoot networks and routing in particular, it helps to look inside the headers of packets to determine if
they are traveling the route that you expect them to take. Packet sniffing is also known as network tap, packet capture, or
logic analyzing.
For FortiGates with NP2, NP4, or NP6 interfaces that are offloading traffic, disable offloading
on these interfaces before you perform a trace or it will change the sniffer trace.
Sniffing packets
To perform a sniffer trace in the CLI:
Before you start sniffing packets, you should prepare to capture the output to a file. A large amount of data may scroll by
and you will not be able to see it without saving it first. One method is to use a terminal program like puTTY to connect to
the FortiGate CLI. Once the packet sniffing count is reached, you can end the session and analyze the output in the file.
The general form of the internal FortiOS packet sniffer command is:
diagnose sniffer packet <interface_name> <‘filter’> <verbose> <count> <tsformat>
To stop the sniffer, type CTRL+C.
FortiOS 6.4.2 Administration Guide 1784
Fortinet Inc.
Troubleshooting
<interface_name> The name of the interface to sniff, such as port1 or internal. This can also be
any to sniff all interfaces.
<‘filter’> What to look for in the information the sniffer reads. none indicates no filtering,
and all packets are displayed as the other arguments indicate.
The filter must be inside single quotes (‘).
<verbose> The level of verbosity as one of:
1 - print header of packets
2 - print header and data from IP of packets
3 - print header and data from Ethernet of packets
4 - print header of packets with interface name
<count> The number of packets the sniffer reads before stopping. If you don't put a
number here, the sniffer will run until you stop it with <CTRL+C>.
<tsformat> The timestamp format.
l a: absolute UTC time, yyyy-mm-dd hh:mm:ss.ms
l l: absolute LOCAL time, yyyy-mm-dd hh:mm:ss.ms
l otherwise: relative to the start of sniffing, ss.ms
Simple sniffing example:
diagnose sniffer packet port1 none 1 3.
This displays the next three packets on the port1 interface using no filtering, and verbose level 1. At this verbosity level,
you can see the source IP and port, the destination IP and port, action (such as ack), and sequence numbers.
In the output below, port 443 indicates these are HTTPS packets and that 172.20.120.17 is both sending and receiving
traffic.
Head_Office_620b # diagnose sniffer packet port1 none 1 3
interfaces=[port1]
filters=[none]
0.545306 172.20.120.17.52989 -> 172.20.120.141.443: psh 3177924955 ack 1854307757
0.545963 172.20.120.141.443 -> 172.20.120.17.52989: psh 1854307757 ack 3177925808
0.562409 172.20.120.17.52988 -> 172.20.120.141.443: psh 4225311614 ack 3314279933
Advanced sniffing example:
The following commands will report packets on any interface that are traveling between a computer with the host name
of “PC1” and a computer with the host name of “PC2”. With verbosity 4 and above, the sniffer trace displays the interface
names where traffic enters or leaves the FortiGate unit. To stop the sniffer, type CTRL+C.
FGT# diagnose sniffer packet any "host <PC1> or host <PC2>" 4
or
FGT# diagnose sniffer packet any "(host <PC1> or host <PC2>) and icmp" 4
The following CLI command for a sniffer includes the ARP protocol in the filter which may be useful to troubleshoot a
failure in the ARP resolution. For example, PC2 may be down and not responding to the FortiGate ARP requests.
FGT# diagnose sniffer packet any "host <PC1> or host <PC2> or arp" 4
FortiOS 6.4.2 Administration Guide 1785
Fortinet Inc.
Troubleshooting
Using packet capture
To use packet capture, the FortiGate must have a disk. You can enable the capture-packet in the firewall policy.
To enable packet capture in the CLI:
config firewall policy
edit <id>
set capture-packet enable
end
To configure packet capture filters in the GUI:
Go to Network > Packet Capture.
When you add a packet capture filter, enter the following information and click OK.
Interface Select the interface to sniff from the drop-down menu.
You must select one interface. You cannot change the interface without deleting
the filter and creating a new one, unlike the other fields.
Max Packets to Save Enter the number of packets to capture before the filter stops.
This number cannot be zero. You can halt the capturing before this number is
reached.
Enable Filters Select this option to specify filter fields.
Host(s) Enter the IP address of one or more hosts.
Separate multiple hosts with commas. To enter a range, use a dash without
spaces. For example, 172.16.1.5-172.16.1.15, or enter a subnet.
Port(s) Enter one or more ports to capture on the selected interface.
Separate multiple ports with commas. To enter a range, use a dash without
spaces, for example 88-90.
VLAN(s) Enter one or more VLANs (if any). Separate multiple VLANs with commas.
Protocol Enter one or more protocols. Separate multiple protocols with commas. To enter a
range, use a dash without spaces. For example, 1-6, 17, 21-25.
Include IPv6 Packets Select this option if you are troubleshooting IPv6 networking, or if your network
uses IPv6. Otherwise, leave it disabled.
Include Non-IP Packets The protocols in the list are all IP based except for ICMP (ping).
Use this feature to capture non-IP based packets. Examples of non-IP packets
include IPsec, IGMP, ARP, and ICMP.
Managing filters
If you select a filter, you have the option to start and stop packet capture in the edit window, or download the captured
packets. You can also see the filter status and the number of packets captured.
You can select the filter and start capturing packets. When the filter is running, the number of captured packets increases
until it reaches the Max Packet Count or you stop it. You cannot download the output file while the filter is running.
FortiOS 6.4.2 Administration Guide 1786
Fortinet Inc.
Troubleshooting
Packet capture controls
To start, stop, or resume packet capture, use the symbols on the screen. These symbols are the same as those used for
audio or video playback. Hover over the symbol to reveal explanatory text. Similarly, to download the *.pcap file, use the
download symbol on the screen.
Downloading the file
You can download the *.pcap file when the packet capture is complete. You must use a third party application, such as
Wireshark, to read *,pcap files. This tool provides you with extensive analytics and the full contents of the packets that
were captured.
Debugging the packet flow
Debug the packet flow when network traffic is not entering and leaving the FortiGate as expected. Debugging the packet
flow can only be done in the CLI. Each command configures a part of the debug action. The final commands starts the
debug.
To trace the packet flow in the CLI:
diagnose debug flow trace start
To follow packet flow by setting a flow filter:
diagnose debug flow {filter | filter6} <option>
l Enter filter if your network uses IPv4.
l Enter filter6 if your network uses IPv6.
Replace <option> with one of the following variables:
Variable Description
addr IPv4 or IPv6 address
clear clear filter
daddr destination IPv4 or IPv6 address
dport destination port
negate inverse IPv4 or IPv6 filter
port port
proto protocol number
saddr source address
sport source port
vd index of virtual domain; -1 matches all
FortiOS 6.4.2 Administration Guide 1787
Fortinet Inc.
Troubleshooting
If FortiGate is connected to FortiAnalyzer or FortiCloud, the diagnose debug flow output will be
recorded as event log messages and then sent to the devices. Do not run this command
longer than necessary, as it generates a significant amount of data.
FortiASIC NP4 or NP6 interface pairs that offload traffic will change the packet flow. Before
debugging any NP4 or NP6 interfaces, disable offloading on those interfaces.
To do this, enter diagnose npu <interface pair> fastpath disable, where
interface pair is np4, np6, np4lite, or np6lite.
To start flow monitoring with a specific number of packets:
diagnose debug flow trace start <N>
To stop flow tracing at any time:
diagnose debug flow trace stop
The following example shows the flow trace for a device with an IP address of 203.160.224.97:
diagnose debug enable
diagnose debug flow filter addr 203.160.224.97
diagnose debug flow show function-name enable
diagnose debug flow trace start 100
Sample output: HTTP
To observe the debug flow trace, connect to the website at the following address:
https://www.fortinet.com
Comment: SYN packet received:
id=20085 trace_id=209 func=resolve_ip_tuple_fast
line=2700 msg="vd-root received a packet(proto=6,
192.168.3.221:1487->203.160.224.97:80) from port5."
SYN sent and a new session is allocated:
id=20085 trace_id=209 func=resolve_ip_tuple line=2799
msg="allocate a new session-00000e90"
Lookup for next-hop gateway address:
id=20085 trace_id=209 func=vf_ip4_route_input line=1543
msg="find a route: gw-192.168.11.254 via port6"
Source NAT, lookup next available port:
id=20085 trace_id=209 func=get_new_addr line=1219
msg="find SNAT: IP-192.168.11.59, port-31925"
direction“
Matched security policy. Check to see which policy this session matches:
id=20085 trace_id=209 func=fw_forward_handler line=317
msg="Allowed by Policy-3: SNAT"
FortiOS 6.4.2 Administration Guide 1788
Fortinet Inc.
Troubleshooting
Apply source NAT:
id=20085 trace_id=209 func=__ip_session_run_tuple
line=1502 msg="SNAT 192.168.3.221->192.168.11.59:31925"
SYN ACK received:
id=20085 trace_id=210 func=resolve_ip_tuple_fast line=2700
msg="vd-root received a packet(proto=6, 203.160.224.97:80-
>192.168.11.59:31925) from port6."
Found existing session ID. Identified as the reply direction:
id=20085 trace_id=210 func=resolve_ip_tuple_fast line=2727
msg="Find an existing session, id-00000e90, reply direction"
Apply destination NAT to inverse source NAT action:
id=20085 trace_id=210 func=__ip_session_run_tuple
line=1516 msg="DNAT 192.168.11.59:31925-
>192.168.3.221:1487"
Lookup for next-hop gateway address for reply traffic:
id=20085 trace_id=210 func=vf_ip4_route_input line=1543
msg="find a route: gw-192.168.3.221 via port5"
ACK received:
id=20085 trace_id=211 func=resolve_ip_tuple_fast line=2700
msg="vd-root received a packet(proto=6,
192.168.3.221:1487->203.160.224.97:80) from port5."
Match existing session in the original direction:
id=20085 trace_id=211 func=resolve_ip_tuple_fast line=2727
msg="Find an existing session, id-00000e90, original
direction"
Apply source NAT:
id=20085 trace_id=211 func=__ip_session_run_tuple
line=1502 msg="SNAT 192.168.3.221->192.168.11.59:31925"
Receive data from client:
id=20085 trace_id=212 func=resolve_ip_tuple_fast
line=2700 msg="vd-root received a packet(proto=6,
192.168.3.221:1487->203.160.224.97:80) from port5."
Match existing session in the original direction:
id=20085 trace_id=212 func=resolve_ip_tuple_fast
line=2727 msg="Find an existing session, id-00000e90,
original direction"
Apply source NAT:
id=20085 trace_id=212 func=__ip_session_run_tuple
line=1502 msg="SNAT 192.168.3.221->192.168.11.59:31925"
Receive data from server:
id=20085 trace_id=213 func=resolve_ip_tuple_fast
line=2700 msg="vd-root received a packet(proto=6,
203.160.224.97:80->192.168.11.59:31925) from port6."
FortiOS 6.4.2 Administration Guide 1789
Fortinet Inc.
Troubleshooting
Match existing session in reply direction:
id=20085 trace_id=213 func=resolve_ip_tuple_fast
line=2727 msg="Find an existing session, id-00000e90,
reply direction"
Apply destination NAT to inverse source NAT action:
id=20085 trace_id=213 func=__ip_session_run_tuple
line=1516 msg="DNAT 192.168.11.59:31925-
>192.168.3.221:1487"
Sample output: IPsec (policy-based)
id=20085 trace_id=1 msg="vd-root received a packet(proto=1, 10.72.55.240:1->10.71.55.10:8)
from internal."
id=20085 trace_id=1 msg="allocate a new session-00001cd3"
id=20085 trace_id=1 msg="find a route: gw-66.236.56.230 via wan1"
id=20085 trace_id=1 msg="Allowed by Policy-2: encrypt"
id=20085 trace_id=1 msg="enter IPsec tunnel-RemotePhase1"
id=20085 trace_id=1 msg="encrypted, and send to 15.215.225.22 with source 66.236.56.226"
id=20085 trace_id=1 msg="send to 66.236.56.230 via intf-wan1“
id=20085 trace_id=2 msg="vd-root received a packet (proto=1, 10.72.55.240:1-1071.55.10:8)
from internal."
id=20085 trace_id=2 msg="Find an existing session, id-00001cd3, original direction"
id=20085 trace_id=2 msg="enter IPsec ="encrypted, and send to 15.215.225.22 with source
66.236.56.226“ tunnel-RemotePhase1"
id=20085 trace_id=2 msgid=20085 trace_id=2 msg="send to 66.236.56.230 via intf-wan1"
Testing a proxy operation
To monitor proxy operations in the CLI:
diagnose test application <application> <option>
To display a list of available application values:
diagnose test application ?
To display a list of available option values:
diagnose test application <application> ?
The <option> value will depend on the application value used in the command.
For example, if the application is http, the CLI command that displays the <option> values is:
diagnose test application http ?
Displaying detail Hardware NIC information
Monitoring the hardware NIC is important because interface errors indicate data link or physical layer issues which may
impact the performance of the FortiGate.
FortiOS 6.4.2 Administration Guide 1790
Fortinet Inc.
Troubleshooting
To monitor hardware network operations in the CLI:
diagnose hardware deviceinfo nic <interface>
Sample output:
The following is sample output when the <interface> is set to lan:
System_Device_Name lan
Current_HWaddr 00:09:0f:68:35:60
Permanent_HWaddr 00:09:0f:68:35:60
State up
Link up
Speed 100
Duplex full
[……]
Rx_Packets=5685708
Tx_Packets=4107073
Rx_Bytes=617908014
Tx_Bytes=1269751248
Rx_Errors=0
Tx_Errors=0
Rx_Dropped=0
Tx_Dropped=0
[……]
Error descriptions
The diagnose hardware deviceinfo nic command displays a list of error names and values that are related to
hardware.
The following table describes possible hardware errors:
Field Description
Rx_Errors = rx error Bad frame was marked as error by PHY
count
Rx_CRC_Errors + This error is only valid in 10/100M mode
Rx_Length_Errors -
Rx_Align_Errors
Rx_Dropped or Running out of buffer space
Rx_No_Buffer_
Count
Rx_Missed_Errors Equals Rx_FIFO_Errors + CEXTERR (Carrier Extension Error Count); only valid in 1000M
mode, which is marked by PHY
Tx_Errors = Tx_ ECOL (Excessive Collisions Count); only valid in half-duplex mode
Aborted_Errors
Tx_Window_Errors Late Collisions (LATECOL) Count
FortiOS 6.4.2 Administration Guide 1791
Fortinet Inc.
Troubleshooting
Field Description
Late collisions are collisions that occur after 64-byte time into the transmission of the packet
while working in 10 to 100 Mb/s data rate and 512-byte time into the transmission of the
packet while working in the 1,000 Mb/s data rate. This register only increments if transmits are
enabled and the device is in half-duplex mode.
Rx_Dropped See Rx_Errors
Tx_Dropped Not defined
Collisions Total number of collisions experienced by the transmitter; valid in half-duplex mode
Rx_Length_Errors Transmission length error
Rx_Over_Errors Not defined
Rx_CRC_Errors Frame CRC error
Rx_Frame_Errors Same as Rx_Align_Errors
This error is only valid in 10/100M mode.
Rx_FIFO_Errors Same as Rx_Missed_Errors - a missed packet count
Tx_Aborted_Errors See Tx_Errors
Tx_Carrier_Errors The PHY should assert the internal carrier sense signal during every transmission. Failure to
do so may indicate that the link has failed or the PHY has an incorrect link configuration. This
register only increments if transmits are enabled. This register isn't valid in internal SerDes 1
mode (TBI mode for the 82544GC/EI) and is valid only when the Ethernet controller is
operating at full duplex.
Tx_FIFO_Errors Not defined
Tx_Heartbeat_Errors Not defined
Tx_Window_Errors See LATECOL
Tx_Single_Collision_ Counts the number of times that a successfully transmitted packet encountered a single
Frames collision
The value increments only if transmits are enabled and the Ethernet controller is in half-duplex
mode.
Tx_Multiple_ A Multiple Collision Count which indicates the number of times that a transmit encountered
Collision_Frames more than one collision, but less than 16. The value increments only if transmits are enabled
and the Ethernet controller is in half-duplex mode.
Tx_Deferred Counts defer events.
A deferred event occurs when the transmitter cannot immediately send a packet due to:
l The medium being busy because another device is transmitting
l The IPG timer hasn't expired
l Half-duplex deferral events are occurring
l XOFF frames are being received
l he link is not up.
FortiOS 6.4.2 Administration Guide 1792
Fortinet Inc.
Troubleshooting
Field Description
This register only increments if transmits are enabled. This counter does not increment for
streaming transmits that are deferred due to TX IPG.
Rx_Frame_Too_ The Rx frame is oversized
Longs
Rx_Frame_Too_ The Rx frame is too short
Shorts
Rx_Align_Errors This error is only valid in 10/100M mode
Symbol Error Count Counts the number of symbol errors between reads - SYMERRS.
The count increases for every bad symbol that's received, whether or not a packet is currently
being received and whether or not the link is up. This register increments only in internal
SerDes mode.
Performing a traffic trace
Traffic tracing allows you to follow a specific packet stream. This is useful when you want to confirm that packets are
using the route you expect them to take on your network.
To view traffic sessions:
Use this command to view the characteristics of a traffic session though specific security policies.
diagnose sys session
To trace per-packet operations for flow tracing:
diagnose debug flow
To trace per-Ethernet frame:
diagnose sniffer packet
To trace a route from a FortiGate to a destination IP address:
# execute traceroute www.fortinet.com
traceroute to www.fortinet.com (66.171.121.34), 32 hops max, 84 byte packets
1 172.20.120.2 0.637 ms 0.653 ms 0.279 ms
2 209.87.254.221 <static-209-87-254-221.storm.ca> 2.448 ms 2.519 ms 2.458 ms
3 209.87.239.129 <core-2-g0-2.storm.ca> 2.917 ms 2.828 ms 9.324 ms
4 209.87.239.199 <core-3-bdi1739.storm.ca> 13.248 ms 12.401 ms 13.009 ms
5 216.66.41.113 <v502.core1.tor1.he.net> 17.181 ms 12.422 ms 12.268 ms
6 184.105.80.9 <100ge1-2.core1.nyc4.he.net> 21.355 ms 21.518 ms 21.597 ms
7 198.32.118.41 <ny-paix-gni.twgate.net> 83.297 ms 84.416 ms 83.782 ms
8 203.160.228.217 <217-228-160-203.TWGATE-IP.twgate.net> 82.579 ms 82.187 ms 82.066 ms
9 203.160.228.229 <229-228-160-203.TWGATE-IP.twgate.net> 82.055 ms 82.455 ms 81.808 ms
10 203.78.181.2 82.262 ms 81.572 ms 82.015 ms
11 203.78.186.70 83.283 ms 83.243 ms 83.293 ms
12 66.171.127.177 84.030 ms 84.229 ms 83.550 ms
13 66.171.121.34 <www.fortinet.com> 84.023 ms 83.903 ms 84.032 ms
FortiOS 6.4.2 Administration Guide 1793
Fortinet Inc.
Troubleshooting
14 66.171.121.34 <www.fortinet.com> 83.874 ms 84.084 ms 83.810 ms
Using a session table
A session is a communication channel between two devices or applications across the network. Sessions allow FortiOS
to inspect and act on a sequential group of packets in a session all at once instead of inspecting each packet individually.
Each session has an entry in the session table that includes important information about the session.
You can view FortiGate session tables from the FortiGate GUI or CLI. The most useful troubleshooting data comes from
the CLI. The session table in the GUI also provides useful summary information, particularly the current policy number
that the session is using.
When to use a session table
Session tables are useful when verifying open connections. For example, if you have a web browser open to browse the
Fortinet website, you would expect a session entry from your computer on port 80 to the IP address for the Fortinet
website.
You can also use a session table to investigate why there are too many sessions for FortiOS to process.
GUI
To view session information in the GUI:
1. Go to Security Fabric > Physical Topology.
2. From the Metrics dropdown, select Sessions.
Finding the security policy for a specific connection
Every program and device on your network must have an open communication channel or session to pass information.
FortiGate manages these sessions with features such as traffic shaping, antivirus scanning, and blocking known bad
websites. Each session will have an entry in the session table.
If a secure web browser session is not working properly, you can check the session table to ensure the session is still
active and going to the proper address. The session table can also tell you the security policy number it matches, so you
can check what is happening in that policy.
1. Get the connection information.
You need to be able to identify the session you want. To do this, you will need:
l The source IP address (usually your computer)
l The destination IP address (if you have it)
l The port number which is determined by the program you are using. Common ports are:
l Port 80 (HTTP for web browsing)
l Port 443 (HTTPS for SSL encrypted web browsing)
l Port 22 (SSH for Secure Shell)
l Port 25 (SMTP for Mail Transfer)
FortiOS 6.4.2 Administration Guide 1794
Fortinet Inc.
Troubleshooting
2. Find the session and policy ID
Go to Security Fabric > Physical Topology. From the Metrics dropdown, select Sessions.
To find your session, search for your source IP address, destination IP address (if you have it), and port number. The
policy ID is listed after the destination information.
3. Use filters to find a session
If there are multiple pages of sessions, you can use a filter to hide the sessions you do not need. To filter the sessions in
the table, click Add Filter, and select an option from the list. You can filter the table by Destination IP, Source IP, or
Source Port.
CLI
The session table output in the CLI is very large. The CLI command supports filters to show only the data you need.
To view session data in the CLI:
diagnose sys session list
An entry is placed in the session table for each traffic session passing through a security policy
To filter session data:
diagnose sys session filter <option>
The values for <option> include the following:
Value Definition
clear Clear session filter
dintf Destination interface
dport Destination port
dst Destination IP address
duration Duration of the session
expire Expire
negate Inverse filter
nport NAT'd source port
nsrc NAT'd source ip address
policy Policy ID
proto Protocol number
proto-state Protocol state
session-state1 Session state1
FortiOS 6.4.2 Administration Guide 1795
Fortinet Inc.
Troubleshooting
Value Definition
session-state2 Session state2
sintf Source interface
sport Source port
src Source IP address
vd Index of virtual domain, -1 matches all
Even though UDP is a sessionless protocol, FortiGate keeps track of the following states:
l When UDP reply does not have a value of 0
l When UDP reply has a value of 1
The following table displays firewall session states from the session table:
State Description
log Session is being logged
local Session is originated from or destined for local stack
ext Session is created by a firewall session helper
may_dirty Session is created by a policy
For example, the session for ftp control channel will have this state but ftp data
channel won't. This is also seen when NAT is enabled.
ndr Session will be checked by IPS signature
nds Session will be checked by IPS anomaly
br Session is being bridged (TP) mode
Examining the firewall session list
The firewall session list displays all open sessions in FortiGate. Examine the list for strange patterns, such as no
sessions apart from the internal network, or all sessions are only to one IP address.
When you examine the firewall session list in the CLI, you can use filters to reduce the output.
To examine the firewall session list in the CLI:
You can use a filter to limit the sessions displayed by source, destination address, port, or NAT'd address. To use more
than one filter, enter a separate line for each value.
The following example filters the session list based on a source address of 10.11.101.112:
FGT# diagnose sys session filter src 10.11.101.112
FGT# diagnose sys session list
The following example filters the session list based on a destination address of 172.20.120.222.
FGT# diagnose sys session filter dst 172.20.120.222
FGT# diagnose sys session list
FortiOS 6.4.2 Administration Guide 1796
Fortinet Inc.
Troubleshooting
To clear all sessions corresponding to a filter:
FGT# diagnose sys session filter dst 172.20.120.222
FGT# diagnose sys session clear
Checking source NAT information
Checking source NAT is important when you are troubleshooting from the remote end of the connection outside the
firewall.
To check the source NAT information in the CLI:
When you display the session list in the CLI, you can match the NAT'd source address (nsrc) and port (nport). This is
useful when multiple internal IP addresses are NAT'd to a common external-facing source IP address.
FGT# diagnose sys session filter nsrc 172.20.120.122
FGT# diagnose sys session filter nport 8888
FGT# diagnose sys session list
Finding object dependencies
You may be prevented from deleting a configuration object when other configuration objects depend on it. You can use
the GUI or CLI to identify objects which depend on, or make reference to the configuration you are trying to delete.
Additionally, if you have a virtual interface with dependent objects, you will need to find and remove those dependencies
before deleting the interface.
To remove interface object dependencies in the GUI:
1. Go to Network > Interfaces. The Ref. column displays the number of objects that reference this interface.
2. Select the number in the Ref . column for the interface. A window listing the dependencies appears.
3. Use these detailed entries to locate and remove object references to this interface. The trash can icon is enabled
after all the object dependencies are removed.
4. Remove the interface by selecting the check box for the interface, and select Delete.
To find object dependencies in the CLI:
When running multiple VDOMs, use the following command in the global configuration only.
diagnose sys cmdb refcnt show <path.object.mkey>
The command searches for the named object in both the most recently used global and VDOM configurations.
Examples
To verify which objects a security policy with an ID of 1 refers to:
diagnose sys cmdb refcnt show firewall.policy.policyid 1
To check what is referred to by interface port1:
diagnose sys cmdb refcnt show system.interface.name port1
To show all dependencies for an interface:
diagnose sys cmdb refcnt show system.interface.name <interface name>
FortiOS 6.4.2 Administration Guide 1797
Fortinet Inc.
Troubleshooting
Sample output:
In this example , the interface has dependent objects, including four address objects, one VIP, and three security
policies.
entry used by table firewall.address:name '10.98.23.23_host’
entry used by table firewall.address:name 'NAS'
entry used by table firewall.address:name 'all'
entry used by table firewall.address:name 'fortinet.com'
entry used by table firewall.vip:name 'TORRENT_10.0.0.70:6883'
entry used by table firewall.policy:policyid '21'
entry used by table firewall.policy:policyid '14'
entry used by table firewall.policy:policyid '19'
Diagnosing NPU-based interfaces
Some Fortinet products contain network processors, such as NP4, NP6Lite, or NP6. Offloading requirements will vary
depending on the model.
To view the initial session setup for NPU-based interfaces:
diagnose debug flow
l If the session is programmed into the ASIC (fastpath) correctly, the command will not detect the packets that arrive
at the CPU.
l If the NPU functionality is disabled, the CPU detects all the packets. However, you should only disable the
NPU functionality for troubleshooting purposes.
To diagnose NPU-based interfaces:
1. Get the NPx or NPU ID and port numbers.
diagnose npu <processor> list
The output will look like this:
ID Model Slot Interface
0 On-board port1 fabric1 fabric3 fabric5
1 On-board fabric2 port2 base2 fabric4
2. Disable the NPU functionality.
diagnose npu <processor> fastpath disable <dev_id>
The dev_id is the NPx ID number.
3. Analyze the packets.
diagnose npu <processor> fastpath-sniffer enable port1
These commands only apply to NP4 and NP6 interfaces.
The output will look similar to:
NP4 Fast Path Sniffer on port1 enabled
This causes traffic on port1 of the network processor to be sent to the CPU. This means you can perform a
standard sniffer trace and use other diagnostic commands, if it is a standard CPU-driven port.
FortiOS 6.4.2 Administration Guide 1798
Fortinet Inc.
Troubleshooting
Identifying the XAUI link used for a specific traffic stream
The diagnose npu np6 xaui-hash command takes a 6-tuple input of the traffic stream to identify the NP6 XAUI link
that the traffic passes through.
This command is only available on the 38xxD, 39xxD, 34xxE, 36xxE, and 5001E series devices.
Syntax
diagnose npu np6 xaui-hash <interface> <proto> <src_ip> <dst_ip> <src_port> <dst_port>
Variable Description
<interface> The network interface that the packets are coming from.
<proto> The proto number, 6 for TCP or 17 for UDP.
<src_ip> The source IP address.
<dst_ip> The destination IP address.
<src_port> The source port.
<dst_port> The destination port.
Examples
# diagnose npu np6 xaui-hash port1 6 1.1.1.1 2.2.2.1 4567 80
NP6_ID: 0, XAUI_LINK: 2
# diagnose npu np6 xaui-hash port1 6 1.1.1.1 2.2.2.1 4567 200
NP6_ID: 6, XAUI_LINK: 2
# diagnose npu np6 xaui-hash port1 6 1.1.1.1 2.2.2.1 4567 20
NP6_ID: 1, XAUI_LINK: 2
# diagnose npu np6 xaui-hash port1 6 1.1.1.1 2.2.2.1 4567 23
NP6_ID: 1, XAUI_LINK: 1
The NP6_ID is the NP index of the model that is being used. It can be found with the diagnose npu np6 port-list
command.
Running the TAC report
The Technical Assistance Center (TAC) report runs an exhaustive series of diagnostic commands. Some of the
commands are only needed if you are using features, such as HA, VPN tunnels, or a modem. Fortinet support my ask
you to use the report output to provide information about the current state of your FortiGate.
Due the amount of output generated, the report may take a few minutes to run. If you are logging CLI output to a file, you
can run this command to familiarize yourself with the diagnostic commands.
To run the TAC report in the CLI:
exec tac report
FortiOS 6.4.2 Administration Guide 1799
Fortinet Inc.
Troubleshooting
Other commands
You may be asked to provide the following information when you contact Fortinet support.
l ARP table on page 1800
l IP address on page 1802
ARP table
The ARP table is used to determine the destination MAC addresses of the network nodes, as well as the VLANs and
ports from where the nodes are reached.
To view the ARP table:
# get system arp
Address Age(min) Hardware Addr Interface
10.10.1.3 1 50:b7:c3:75:ea:dd internal7
192.168.0.190 0 28:f1:0e:03:2a:97 wan1
192.168.0.97 0 f4:f2:6d:37:b0:99 wan1
To view the ARP cache in the system:
# diagnose ip arp list
index=14 ifname=internal7 10.10.1.3 50:b7:c3:75:ea:dd state=00000004 use=2494 confirm=1995
update=374 ref=3
index=5 ifname=wan1 192.168.0.190 28:f1:0e:03:2a:97 state=00000002 use=88 confirm=86
update=977639 ref=2
index=22 ifname=internal 192.168.1.111 00:0c:29:c6:79:3d state=00000004 use=3724
confirm=9724 update=3724 ref=0
index=5 ifname=wan1 224.0.1.140 01:00:5e:00:01:8c state=00000040 use=924202 confirm=930202
update=924202 ref=1
index=5 ifname=wan1 192.168.0.97 f4:f2:6d:37:b0:99 state=00000002 use=78 confirm=486
update=614 ref=26
index=14 ifname=internal7 10.10.1.11 state=00000020 use=172 confirm=1037790 update=78 ref=2
ARP request and cache
The FortiGate must make an ARP request when it tries to reach a new destination. The base ARP reachable value
determines how often an ARP request it sent; the default is 30 seconds. The actual ARP reachable time is a random
number between half and three halves of the base reachable time, or 15 to 45 seconds. The random number is updated
every five minutes.
ARP entries in the ARP cache are updated based on the state of the ARP entry and the objects that are using it, as
highlighted in the following output sample:
index=5 ifname=wan1 224.0.1.140 01:00:5e:00:01:8c state=00000040 use=924202
confirm=930202 update=924202 ref=1
There are multiple possible states for an ARP entry, and the state-transition mechanism can be complex. Common
states include the following:
FortiOS 6.4.2 Administration Guide 1800
Fortinet Inc.
Troubleshooting
State Meaning Description
000000002 or 0x02 REACHABLE An ARP response was received
000000004 or 0x04 STALE No ARP response within the expected time
000000008 or 0x08 DELAY A transition state between STALE and REACHABLE
before Probes are sent out
000000020 or 0x20 FAILED Did not manage to resolve within the maximum
configured number of probes
000000040 or 0x40 NOARP Device does not support ARP, e.g. IPsec interface
000000080 or 0x80 PERMANENT A statically defined ARP entry
An entry that is in the STALE (0x04) or FAILED (0x20) states with no references to it (ref=0) can be deleted. Many factors
affect the state-transmit mechanism and if an entry is used by other subsystems. For example, ARP creation, ARP
request/reply, neighbor lookup, routing, and others can cause an ARP entry to be in use or referenced.
The garbage collection mechanism runs every 30 seconds, and checks and removes stale and unreferenced entries if
they have been stale for longer than 60 seconds. Garbage collection will also be triggered when the number of ARP
entries exceeds the configured threshold. If the threshold is exceeded, no entries can be added to the ARP table.
To set the maximum number of ARP entries threshold:
config system global
set arp-max-entry <integer>
end
arp-max-entry <integer> The maximum number of dynamically learned MAC addresses that can be added
to the ARP table (131072 to 2147483647, default = 131072).
To clear all of the entries in the ARP table:
execute clear system arp table
To delete a single ARP entry from the ARP table:
diagnose ip arp delete <interface name> <IP address>
To add static ARP entries:
config system arp-table
edit 1
set interface "internal"
set ip 192.168.50.8
set mac bc:14:01:e9:77:02
next
end
To view a summary of the ARP table:
# diagnose sys device list root
FortiOS 6.4.2 Administration Guide 1801
Fortinet Inc.
Troubleshooting
list virtual firewall root info:
ip4 route_cache: table_size=65536 max_depth=2 used=31 total=34
arp: table_size=16 max_depth=2 used=5 total=6
proxy_arp: table_size=256 max_depth=0 used=0 total=0
arp6: table_size=32 max_depth=1 used=3 total=3
proxy_arp6: table_size=256 max_depth=0 used=0 total=0
local table version=00000000 main table version=0000002b
vf=root dev=root vrf=0
vf=root dev=ssl.root vrf=0
...
vf=root dev=internal5 vrf=0
ses=0/0 ses6=0/0 rt=0/0 rt6=0/0
IP address
You may want to verify the IP addresses assigned to the FortiGate interfaces are what you expect them to be.
To verify IP addresses:
diagnose ip address list
The output lists the:
l IP address and mask (if available)
l index of the interface (a type of ID number)
l devname (the interface name)
While physical interface names are set, virtual interface names can vary. A good way to use this command is to list all of
the virtual interface names. For vsys_ha and vsys_fgfm, the IP addresses are the local host, which are virtual
interfaces that are used internally.
Sample output:
# diagnose ip address list
IP=10.31.101.100->10.31.101.100/255.255.255.0 index=3 devname=internal
IP=172.20.120.122->172.20.120.122/255.255.255.0 index=5 devname=wan1
IP=127.0.0.1->127.0.0.1/255.0.0.0 index=8 devname=root
IP=127.0.0.1->127.0.0.1/255.0.0.0 index=11 devname=vsys_ha
IP=127.0.0.1->127.0.0.1/255.0.0.0 index=13 devname=vsys_fgfm
FortiGuard troubleshooting
The FortiGuard service provides updates to AntiVirus (AV), Antispam (AS), Intrusion Protection Services (IPS),
Webfiltering (WF), and more. The FortiGuard Distribution System (FDS) consists of a number of servers across the
world that provide updates to your FortiGate unit. Problems can occur with the connection to FDS and its configuration
on your local FortiGate unit.
Some of the more common troubleshooting methods are listed here, including:
l Troubleshooting process for FortiGuard updates on page 1803
l FortiGuard server settings on page 1804
l FortiGuard server settings on page 1804
FortiOS 6.4.2 Administration Guide 1802
Fortinet Inc.
Troubleshooting
Verifying connectivity to FortiGuard
You can verify FortiGuard connectivity in the GUI and CLI.
To verify FortiGuard connectivity in the GUI:
1. Got to Dashboard > Status.
2. Check the Licenses widget. When FortiGate is connected to FortiGuard, a green check mark appears next to the
available FortiGuard services.
To verify FortiGuard connectivity in the CLI:
execute ping service.fortiguard.net
execute ping update.fortiguard.net
Sample output:
FG100D# execute ping service.fortiguard.net
PING guard.fortinet.net (208.91.112.196): 56 data bytes
64 bytes from 208.91.112.196: icmp_seq=0 ttl=51 time=61.0 ms
64 bytes from 208.91.112.196: icmp_seq=1 ttl=51 time=60.0 ms
64 bytes from 208.91.112.196: icmp_seq=2 ttl=51 time=59.6 ms
64 bytes from 208.91.112.196: icmp_seq=3 ttl=51 time=58.9 ms
64 bytes from 208.91.112.196: icmp_seq=4 ttl=51 time=59.2 ms
--- guard.fortinet.net ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 58.9/59.7/61.0 ms
FG100D# execute ping update.fortiguard.net
PING fds1.fortinet.com (208.91.112.68): 56 data bytes
64 bytes from 208.91.112.68: icmp_seq=0 ttl=53 time=62.0 ms
64 bytes from 208.91.112.68: icmp_seq=1 ttl=53 time=61.8 ms
64 bytes from 208.91.112.68: icmp_seq=2 ttl=53 time=61.3 ms
64 bytes from 208.91.112.68: icmp_seq=3 ttl=53 time=61.9 ms
64 bytes from 208.91.112.68: icmp_seq=4 ttl=53 time=61.8 ms
Troubleshooting process for FortiGuard updates
The following process shows the logical steps you should take when troubleshooting problems with FortiGuard updates:
1. Does the device have a valid license that includes these services?
Each device requires a valid FortiGuard license to access updates for some or all of these services. You can verify
the status of the support contract for your devices at the Fortinet Support website.
2. If the device is part of a high availability (HA) cluster, do all members of the cluster have the same level of
support?
You can verify the status of the support contract for all of the devices in your HA cluster at the Fortinet Support
website.
3. Are services enabled on the device?
To see the FortiGuard information and status for a device in the GUI, go to System > FortiGuard.
Use this page to verify the status of each component, and enable each service.
FortiOS 6.4.2 Administration Guide 1803
Fortinet Inc.
Troubleshooting
4. Can the device communicate with FortiGuard servers?
Go to System > FortiGuard in the GUI, and try to update AntiVirus and IPS, or test the availability of Web Filtering
and AS default and alternate ports.
5. Is there proper routing to reach the FortiGuard servers?
Ensure there is a static or dynamic route that allows your FortiGate to reach the FortiGuard servers. Usually a
generic default route to the internet is enough, but you may need to verify this if your network is complex.
6. Are there issues with DNS?
An easy way to test this is to attempt a traceroute from behind the FortiGate to an external network using the Fully
Qualified Domain Name (FQDN) for a location. If the traceroute FQDN name doesn't resolve, you have general
DNS problems.
7. Is there anything upstream that might be blocking FortiGuard traffic, either on the network or ISP side?
Many firewalls block all ports, by default, and ISPs often block ports that are low. There may be a firewall between
the FortiGate and the FortiGuard servers that's blocking the traffic. By default, FortiGuard uses port 53. If that port is
blocked you need to either open a hole for it or change the port it is using.
8. Is there an issue with source ports?
It is possible that ports that FortiGate uses to contact FortiGuard are being changed before they reach FortiGuard or
on the return trip before they reach FortiGate. A possible solution for this is to use a fixed-port at NAT'd firewalls to
ensure the port remains the same. You can use packet sniffing to find more information about what's happening with
ports.
9. Are there security policies that include antivirus?
If none of the security policies include antivirus, the antivirus database will not be updated. If antivirus is included,
only the database type that's used will be updated.
FortiGuard server settings
Your local FortiGate connects to remote FortiGuard servers to get updates to FortiGuard information, such as new
viruses that may have been found or other new threats.
This section provides methods to display FortiGuard server information on your FortiGate, and how to use that
information and update it to fix potential problems.
Displaying the server list
To get a list of FDS servers FortiGate uses to send web filtering requests:
get webfilter status
or
diagnose debug rating
Rating requests are only sent to the server at the top of the list in normal operation. Each server is probed for Round Trip
Time (RTT) every two minutes. Rating may not be enabled on your FortiGate.
Optionally, you can add a refresh rate to the end of the command to determine how often the server list is refreshed.
Sample output:
Locale : english
License : Contract
Expiration : Thu Oct 9 02:00:00 2011
FortiOS 6.4.2 Administration Guide 1804
Fortinet Inc.
Troubleshooting
-=- Server List (Mon Feb 18 12:55:48 2008) -=-
IP Weight RTT Flags TZ Packets CurrLost TotalLost
a.b.c.d 0 1 DI 2 1926879 0 11176
10.1.101.1 10 329 1 10263 0 633
10.2.102.2 20 169 0 16105 0 80
10.3.103.3 20 182 0 6741 0 776
10.4.104.4 20 184 0 5249 0 987
10.5.105.5 25 181 0 12072 0 178
Output details
The server list includes the IP addresses of alternate servers if the first entry cannot be reached. In this example, the IP
addresses are not public addresses.
The following flags in get webfilter status indicate the server status:
Flag Description
D The server was found through the DNS lookup of the hostname.
If the hostname returns more than one IP address, all of them are flagged with D and are used first
for INIT requests before falling back to the other servers.
I The server to which the last INIT request was sent
F The server hasn't responded to requests and is considered to have failed
T The server is currently being timed
S Rating requests can be sent to the server.
The flag is set for a server only in two cases:
l The server exists in the servers list received from the (Undefined variable:
FortinetVariables.ProductName1) or any other INIT server.
l The server list received from the (Undefined variable: FortinetVariables.ProductName1) is
empty so the (Undefined variable: FortinetVariables.ProductName1) is the only server that the
(Undefined variable: FortinetVariables.ProductName6) knows and it should be used as the
rating server.
Sorting the server list
The server list is sorted first by weight. The server with the smallest RTT appears at the top of the list, regardless of
weight. When a packet is lost (there has been no response in 2 seconds), it is re-sent to the next server in the list.
Therefore, the top position in the list is selected based on RTT, while the other positions are based on weight.
Calculating weight
The weight for each server increases with failed packets and decreases with successful packets. To lower the possibility
of using a remote server, the weight isn't allowed to dip below a base weight. The base weight is calculated as the
difference in hours between the FortiGate and the server multiplied by 10. The farther away the server is, the higher its
base weight is and the lower it appears in the list.
FortiOS 6.4.2 Administration Guide 1805
Fortinet Inc.
Troubleshooting
Additional resources
To learn more about FortiGate and FortiOS, as well information about technical issues, please refer to the following
resources:
Technical documentation
Installation, Administration, and Quick Start Guides, as well as other technical documents, are available online at the
Fortinet Document Library
Fortinet video library
The Fortinet Video Library hosts a collection of video which provide valuable information about Fortinet products.
Release notes
Issues that arise after the technical documentation has been published will often be listed in the Release Notes. To find
these, go to the Fortinet Document Library.
Knowledge base
The Fortinet Knowledge Base provides access to a variety of articles, white papers, and other documentation that
provides technical insight into a range of Fortinet products. The Knowledge Base is available online at:
http://kb.fortinet.com
Fortinet technical discussion forums
An online technical forum allows administrators to contribute to discussions about issues that relate to their Fortinet
products. Searching the forum can help an administrator identify if an issue has been experienced by another user. You
can access the support forums at: https://forum.fortinet.com/
Fortinet training services online campus
The Fortinet Training Services Online Campus hosts a collection of tutorials and training materials which you can use to
increase your knowledge of Fortinet products. https://www.fortinet.com/training.html
Fortinet Support
You defined your problem, researched a solution, put together a plan to find the solution, and executed that plan. At this
point, if the problem hasn't been solved, it's time to contact Fortinet Support for assistance.
FortiOS 6.4.2 Administration Guide 1806
Fortinet Inc.
Copyright© 2022 Fortinet, Inc. All rights reserved. Fortinet®, FortiGate®, FortiCare® and FortiGuard®, and certain other marks are registered trademarks of Fortinet, Inc., in the
U.S. and other jurisdictions, and other Fortinet names herein may also be registered and/or common law trademarks of Fortinet. All other product or company names may be
trademarks of their respective owners. Performance and other metrics contained herein were attained in internal lab tests under ideal conditions, and actual performance and
other results may vary. Network variables, different network environments and other conditions may affect performance results. Nothing herein represents any binding
commitment by Fortinet, and Fortinet disclaims all warranties, whether express or implied, except to the extent Fortinet enters a binding written contract, signed by Fortinet’s
General Counsel, with a purchaser that expressly warrants that the identified product will perform according to certain expressly-identified performance metrics and, in such
event, only the specific performance metrics expressly identified in such binding written contract shall be binding on Fortinet. For absolute clarity, any such warranty will be
limited to performance in the same ideal conditions as in Fortinet’s internal lab tests. In no event does Fortinet make any commitment related to future deliverables, features or
development, and circumstances may change such that any forward-looking statements herein are not accurate. Fortinet disclaims in full any covenants, representations, and
guarantees pursuant hereto, whether express or implied. Fortinet reserves the right to change, modify, transfer, or otherwise revise this publication without notice, and the most
current version of the publication shall be applicable.
You might also like
- FortiOS-6.2.0-Cookbook-Security Rating Service100% (1)FortiOS-6.2.0-Cookbook-Security Rating Service1,362 pages
- cs3591 New Computer Network 2023 24 Course FileNo ratings yetcs3591 New Computer Network 2023 24 Course File22 pages
- Cecilia Laurente - Nursing Practice and Career100% (1)Cecilia Laurente - Nursing Practice and Career11 pages
- Krumm20Heller20 20del20inicienso20a20la20osmoterapiaNo ratings yetKrumm20Heller20 20del20inicienso20a20la20osmoterapia3,157 pages
- FortiOS-6 4 1-Administration - Guide PDFNo ratings yetFortiOS-6 4 1-Administration - Guide PDF1,724 pages
- Criteria For Success of Osseointegrated Endosseous Implants ZarbNo ratings yetCriteria For Success of Osseointegrated Endosseous Implants Zarb6 pages
- FortiOS-7.4.5-Administration - Guide (2) - Parte1No ratings yetFortiOS-7.4.5-Administration - Guide (2) - Parte1300 pages
- BIOS Manual For System Boards With Intel® 7 Series / C216 ChipsetNo ratings yetBIOS Manual For System Boards With Intel® 7 Series / C216 Chipset70 pages
- Football Accumulator Tips For Today - WinDrawWin.No ratings yetFootball Accumulator Tips For Today - WinDrawWin.1 page
- Cybercrime Among University Undergraduates: Implications On Their Academic AchievementNo ratings yetCybercrime Among University Undergraduates: Implications On Their Academic Achievement11 pages
- Unit 1 Rates of Change Assessment of Learning 1 PDFNo ratings yetUnit 1 Rates of Change Assessment of Learning 1 PDF11 pages
- Manuf Sustainability 2023-24 Preset2 Manuf Sustainability enNo ratings yetManuf Sustainability 2023-24 Preset2 Manuf Sustainability en98 pages
- UT Dallas Syllabus For cs6390.001 05s Taught by Jorge Cobb (Jcobb)No ratings yetUT Dallas Syllabus For cs6390.001 05s Taught by Jorge Cobb (Jcobb)3 pages
- Macroeconomics 2Nd Edition Krugman Solutions Manual Full Chapter PDF100% (11)Macroeconomics 2Nd Edition Krugman Solutions Manual Full Chapter PDF34 pages
- Tektronix Power Test Set TU-75B Manual - Tektronix - 1964 - 621.381548No ratings yetTektronix Power Test Set TU-75B Manual - Tektronix - 1964 - 621.38154810 pages
