Scribd Logo
Upload

Welcome to Scribd!

  • 7 views

    C0 FF EETABle

    Uploaded by

    Karel Trommel
    This document provides instructions for building a bentwood coffee table. It includes a shopping list of materials, cutting list, overview diagram, and 6 steps with diagrams for construction. The table top is made of 3x1 boards attached to a center 2x4 board. Legs are cut from 4x4 posts. Braces are added and the whole piece is finished with stain or paint.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    C0 FF EETABle

    Uploaded by

    Karel Trommel
    7 views11 pages
    This document provides instructions for building a bentwood coffee table. It includes a shopping list of materials, cutting list, overview diagram, and 6 steps with diagrams for construction. The table top is made of 3x1 boards attached to a center 2x4 board. Legs are cut from 4x4 posts. Braces are added and the whole piece is finished with stain or paint.

    Original Title

    09841C0ffEETABle

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for building a bentwood coffee table. It includes a shopping list of materials, cutting list, overview diagram, and 6 steps with diagrams for construction. The table top is made of 3x1 boards attached to a center 2x4 board. Legs are cut from 4x4 posts. Braces are added and the whole piece is finished with stain or paint.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    7 views11 pages

    C0 FF EETABle

    Uploaded by

    Karel Trommel
    This document provides instructions for building a bentwood coffee table. It includes a shopping list of materials, cutting list, overview diagram, and 6 steps with diagrams for construction. The table top is made of 3x1 boards attached to a center 2x4 board. Legs are cut from 4x4 posts. Braces are added and the whole piece is finished with stain or paint.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 11

    Bentwood Howie Coffee Table

    GSPublisherVersion 0.0.100.100
    Shopping List

    2 - 2x2 - 8'

    1 - 1x4 - 6'

    1 - 4x4 - 6'

    2 - 2x4 - 8'

    1 - 1x2 - 4'

    2 - 1x3 - 10'

    Wood Stain

    Different Grits of Sandpaper (100-220)

    1 1/2" screws

    3″ screws

    2″ screws

    GSPublisherVersion 0.0.100.100
    Cutting List

    Pc. - size inches - length

    12 - 1x3 - 1'8"

    1 - 2x4 - 1'6"

    2 - 1x2 - 1'6"

    2 - 2x4 - 2'2"

    2 - 2x4 - 3'8"

    4 - 4x4 - 1'3"

    2 - 1x4 - 2'2"

    2 - 2x2 - 1'2"

    2 - 2x2 - 3'9 1/2"

    2 - 2x2 - 1'8"

    GSPublisherVersion 0.0.100.100
    Overview

    2'-2"
    0'-2"
    1'-3"

    1'-10"

    4'-4"
    1'-5"

    GSPublisherVersion 0.0.100.100
    STEP 1

    Build Table Top


    1.1 Cut twelve 3×1’s to 1′8" for the table top.
    1.2 Cut one 2x4 to 1'6" board for table top.
    1.3 Use 1 1/2" screws to connect table top boards to the middle board .
    predrill holes and tilt screws at 45 degree angle.

    3x1"

    4x2"

    Screws

    1'8"

    4"

    1'8"

    GSPublisherVersion 0.0.100.100
    STEP 2

    Attach Table Top Battens


    1.1 Cut two 1×2’s to 1′6" for the table top board battens.
    1.2 Use 1 1/2" screws to connect table top boards to table top battens .
    predrill holes and assamble boards like shown down below.

    4x1"

    "
    1'6

    GSPublisherVersion 0.0.100.100
    STEP 3

    Build Table Top Frame


    3.1 Cut two 2×4’s to 2′2" length for table top frame.
    3.2 Cut two 2x4 to 3'8" length for table top frame.
    3.3 Assemble boards like shown down below. Predrill Holes and use 3"
    screws to connect Table top frame to table top boards

    "
    3'8" 2'2

    GSPublisherVersion 0.0.100.100
    STEP 4

    Build Table Legs


    4.1 Cut four 4×4’s to 1′3" length cut both ends at the same diretion at 10
    degree.for table leg frame.
    4.2 Cut Two 1x4's to 2'2" for table leg connector .
    4.3 Cut Two 2x2's to 1'2" for table leg connector.
    4.4 Build two pairs of legs. Assemble parts like shown down below.
    4.4 Predrill holes and use 3" screws

    1'-3"
    10° cut

    2x2"
    Table leg 1:10

    4x4"
    "
    1'2

    ' 2"
    2

    4x1"

    GSPublisherVersion 0.0.100.100
    STEP 4

    Attach Legs to Table Top


    4.1 Take built legs and attach it to the table top so that it will cover half of
    the external table top frame and half of table top batten
    4.2 Predrill holes. Use 2" screws to attach Legs to the table top.

    Screws

    GSPublisherVersion 0.0.100.100
    STEP 5

    Attach Braces to Table


    5.1 Cut one 2x2 to 3'9 1/2" for table brace (A)
    5.2 Cut two 2x2 to 1'8" for table braces (B) cut ends like shown on the
    illustration below.
    5.3. Attach Braces to each other like shown on the illustration. Predrill
    holes and use 3" screws

    1'-8"
    60° cut
    30° cut
    60° cut

    Brace 1:10

    3'9 1
    /2"

    GSPublisherVersion 0.0.100.100
    STEP 6

    Add finish
    6.1 Use sandpaper to smooth out sharp edges. Stain or paint to protect
    wood.

    GSPublisherVersion 0.0.100.100

    You might also like