A B C D E F G H J K

GENERAL NOTES:
TAG NUMBER 023-V-31001 1. FOR GENERAL NOTES, ABBREVIATIONS AND SYMBOLS SEE DRAWINGS: TEP-900-PID-PS-BP4-0001 TO
SERVICE ANTI FOAM INJECTION PACKAGE TEP-900-PID-PS-BP4-0005.
2. ALL INSTRUMENT / MANUAL VALVE TAG TAG NUMBERS ON THIS P&ID WILL BE PREFIXED BY 023 UNLESS
CAPACITY 1.0 l/h
OTHERWISE INDICATED.
3. ALL INTERLOCKS IN THIS P&ID ARE PROCESS SHUTDOWN LEVEL UNLESS OTHERWISE INDICATED.
56322 20 80
023-NG-31019-2"-1CS1U3-NI 50
1 NG
10.8 1
093-PID-0007-001 .
20 70 NOTES:
NOTE 1 38 023-CL-31005-2"-1SD0E3-NI Attachment 1: 1. ANTI FOAM-FILLING CONNECTION.
3.5 2. VALVE WILL BE OPENED ONCE THE OPERATOR HAS VERIFIED THAT WATER IS SUITABLE
P&ID marked up for Service test TO BE SENT TO THE DISPOSAL VALVE TO BE ACCESSIBLE FOR OPERATION.
3. DELETED.
4. DRIP PAN FOR SECONDARY CONTAINMENT, WILL BE PART OF ANTI FOAM INJECTION PACKAGE.
5. CHEMICAL INJECTION PACKAGE SHALL BE LOCATED IN CHEMICAL RESISTANT CURBED AREA WITH
50506 20 75 CORNER PIT DESIGN TO CONTAIN AND COLLECT ANY SPILLAGES..
023-WD-31002-1"-1SD0W3-NI 44 NNF 6. DELETED.
WD TO ATM
11.0 7. REFER TO CIVIL UG COMPOSITE DRAWING.
093-PID-0017-001 AT SAFE LOCATION
HV-31649 8. NO SIMULTANEOUS INJECTION TO INJECTION POINT IS REQUIRED. INJECTION TO SPECIFIC LOCATION
1 WILL BE ACTIVATED BY OPEN PARTICULAR VALVE.
NC

80
9. FILLING BY PORTABLE AIR DRIVEN PUMP. SERVICE AIR CONNECTION IS REQUIRED AT SKID EDGE.
NC

3.5
4

38
AIR DRIVEN PUMP AND FLEXIBLE HOSE ARE SUPPLIED AS LOOSE ITEM BY VENDOR.
HV-31648
10. UTILITY STATION FOR UTILITY AIR SHALL BE PROVIDED CLOSE TO ANTIFOAM INJECTION PACKAGE

20
AT LOW POINT FOR AIR DRIVEN PUMP DURING FILLING OPERATION.
023-VN-31010-2"HOLD 7-1CS1P3-NI
6
2 10mm WEEP HOLE 2
6 1" HV-31654
0.75" HV-31658 D5 GENERAL HOLDS:
B2 7 NC I - DELETED.
1 NC HV-31656 O - INDIVIDUAL FUNNEL FOR DRAINS TO BE SOLVED BY PIPING / CIVIL DPT.
8
NC 1 LO
HV-31650

023-V-31001 HOLDS:
1. DELETED.
NOTE 4, 5, 8, 9, 10 2. DELETED.
3. DELETED.
4. DELETED.
5. DELETED.
6. DELETED.
7. LINE SIZE IS ON HOLD, TO BE SOLVED BY PROCESS DPT. AFTER VENDOR INFORMATION RECEIVED ON BRV.
8. DELETED.
3 9. DELETED.
10. DELETED.
3
11. DELETED.

HV-31662 20 70
38 023-CL-31001-2"-3SD0W3-NI
50512 023-PID-0017-001
39.0
7 ANTIFOAM
8
1" TO 023-P-31001A/B/C/D
HV-31661 NC
SUCTION
D36
LEGEND:
0.75" Sampling
Point
NC HV-31653 20 70
Lined-Up / Routed 38 023-CL-31002-2"-3SD0W3-NI
50521 023-PID-0009-001
39.0 NNF
7 ANTI FOAM
1" 8
Valve w/ Open Position HV-31652 NC
TO 023-P-31006A/B/C
SUCTION Code Description
4 D36
A Proceed - No comment 4
B Proceed - With comment
Valve w/ Close Position Sampling
C Do not proceed - Revise & Resubmit
Point
D Cancelled
E Received as information
Operate Valve Signature:
HV-31663 20 70
0.75" NC 023-CL-31003-2"-3SD0W3-NI
38
50435 023-PID-0004-001
39.0 NNF
7 ANTI FOAM
Temporary Piping / Hose 1"
8
NC
TO 023-D-31001 INLET
HV-31664 C02 13-JUL-2018 RE-APPROVED FOR CONSTRUCTION A. WAKHID M. KUMAR K.ELKH0RASSANI
D36
20
HV-31659 Sampling 70
38 023-CL-31004-2"-3SD0W3-NI
50417 023-PID-0004-001 C01 30-NOV-2017 APPROVED FOR CONSTRUCTION A. MURSID M. D'AVINO K.ELKH0RASSANI
Point 39.0 NNF
7 ANTI FOAM
8
1" TO 023-D-31001 B05 09-AUG-2017 APPROVED FOR DESIGN A. MURSID M. D'AVINO K.ELKH0RASSANI

5 HV-31660
D36
NC LIQUID OUTLET 5
B04 25-FEB-2017 ISSUED FOR HAZOP A. MURSID D. POLIDORO K.ELKH0RASSANI
CONTRACTOR VENDOR Sampling
Point REV DATE DESCRIPTION DRAWN CHKD APPD
REVISIONS

REFERENCE
DRAWINGS

Service test press: 11.3 barg

DWG NO. TITLE
STROKE STROKE
HIC HIC ALL RIGHT RESERVED
ADJUST ADJUST Service test press: full of water THIS DOCUMENT AND ANY DATA AND INFORMATION CONTAINED THEREIN ARE CONFIDENTIAL AND PROPERTY BP BERAU LTD. AND COPYRIGHT THEREIN IS VESTED BP BERAU LTD. NO PART OF THIS DOCUMENT,
31611 31612 DATA, INFORMATION SHALL BE DISCLOSED TO OTHERS OR REPRODUCED IN ANY MANNER OR USED FOR ANY PURPOSE WHATSOEVER, EXCEPT WITH THE PRIOR PERMISSION OF BP BERAU LTD.
70

Service test press: N/A (line for

TANGGUH EXPANSION PROJECT
SPHN
3.5

6 6
38

023 FIT testing only).

20

31009
023-CL-31013-2"-1CS2P3-NI
023-CL-31012-2"-1SD0W3-NI

NC
HV-31655

PIPING AND INSTRUMENTATION DIAGRAM

UNIT 023 - ACID GAS REMOVAL TRAIN 3
023-DC-31517-12"-12FE0W3-NI
ANTIFOAM PACKAGE
1
UG UG UG UG UG
NOTE 5 NC NOTE 7 CONTRACT NO. @BP p.l.c. DOC. CLASS SCALE
7 NOTE 2 SECURITY CLASSIFICATION: 7
HV-31657 4420001030 BP INTERNAL
1 NTS

UG
COMPANY DRAWING NO. X CORE SIZE REV.
TEP-023-PID-PS-BP4-0016-001 NON CORE A1 C02
DC 54936
023-DC-003 CONTRACTOR'S C-NUMBER CONTRACTOR'S S-NUMBER
870310-PTS-023-PCS-PID-06070.001

A B C D E F G H J K
 Attachment 1:
P&ID marked up for
Service test

Pressure
monitoring

Pressure
monitoring

04 23-AUG-18 R-SUBMIT FOR REVIEW ATA AI HKM

03 08-JUN-18 R-SUBMIT FOR REVIEW ATA AI HKM

02 01-MAR-18 R-SUBMIT FOR REVIEW ATA AI HKM

01 28-DEC-17 SUBMIT FOR REVIEW ATA AI HKM

REV DATE DESCRIPTION DRAWN CHKD APPD

REVISIONS

REFERENCE
DRAWINGS

Service test press: 11.3 barg DWG NO.

ALL RIGHT RESERVED
TITLE

THIS DOCUMENT AND ANY DATA AND INFORMATION CONTAINED THEREIN ARE CONFIDENTIAL AND PROPERTY BP BERAU LTD. AND COPYRIGHT THEREIN IS VESTED BP BERAU LTD. NO PART OF THIS DOCUMENT, DATA,
INFORMATION SHALL BE DISCLOSED TO OTHERS OR REPRODUCED IN ANY MANNER OR USED FOR ANY PURPOSE WHATSOEVER, EXCEPT WITH THE PRIOR WRITTEN PERMISSION OF BP BERAU LTD.

TANGGUH EXPANSION PROJECT

Service test press: full of water

Service test press: N/A (line for

FIT testing only). SUPPLIER LOGO

PIPING AND INSTRUMENT DIAGRAM

ANTIFOAM INJECTION PACKAGE
(023-V-31001)

PURCHASE ORDER NO : @BP p.l.c. SCALE

SECURITY CLASSIFICATION:
1201883
BP INTERNAL
COMPANY DRAWING NO. CORE SIZE REV.
TEP-1201883-C01-0003 NON CORE A3 04
SUPPLIER NUMBER CSTS NUMBER
870310-S-1201883-MEC-C01-0003