PVEH
PVEH
PVEH
The PVEH actuator is a proportional control actuator with closed-loop spool control primarily used to
control work functions with high performance requirements.
PVEH
PVEH functionality
PVEH functionality
Special SP
Features
NP Pp
Uf
DI_B
DI_A
Udc2 Micro-
LED controller NC1 NC3
Error
US
Udc Power
Supply
LVDT
1 0 2
NO2 NO4
P109148
The PVE functionality includes an electric circuit with a closed-loop logic. An embedded micro-controller
processes the signal voltage and the LVDT feedback signal and regulates the solenoid valves accordingly.
A continuous modulation of solenoid valves NC1 and NO4 together with a simultaneous energization of
NO2 and de-energization of NC3 causes the main spool to move to the right direction and vice versa.
When the main spool is stroked to the far right, a simultaneous energization of both NO2 and NO4 and
de-energization of both NC1 and NC3 balances the main spool in its stroked position. An emergency stop
activated when the spool is stroked will cause all solenoid valves to de-energize causing the main spool
PVEH
to move back to its neutral position by means of the main spool neutral spring and the hydraulic
principle.
Schematics
PVEH
P109198
Dimensions
PVEH Connector height
DEU = 30 mm [1.2 in]
DIN = 40 mm [1.6 in]
101 [3.98]
89 [3.5] 45 [1.77]
P109233
Control Specification
Description Type Value
Supply Voltage (UDC) Rated Range 11 to 32 VDC
Max. ripple 5%
Signal Voltage PWM (US) Neutral US = 0.5 UDC = 50% DUT
Q: P to A US = (0.5 to 0.25) UDC = 50% to 25% DUT
Q: P to B US = (0.5 to 0.75) UDC = 50% to 75% DUT
Input Impedance Rated 12 kΩ
Input Capacitance Rated 100 nF
PVEH
Current consumption
Description @ 12 VDC @ 24 VDC
PWM Frequency (US) recommended > 1000 Hz > 1000 Hz
Current Consumption 540 mA 270 mA
Max. DI Current 200 mA 200 mA
Pilot pressure
Minimum Nominal Maximum
10.0 bar [145 psi] 13.5 bar [196 psi] 15.0 bar [218 psi]
Fluid consumption
Neutral Locked position Actuating
0.0 l/min 0.0 l/min 0.7 l/min
[0.18 US gal/min]
Technical specification
Parameter Minimum Recommended range Maximum
Fluid viscosity 4 mm2/s [39 SUS] 12 to 75 mm2/s [65 to 347 SUS] 460 mm2/s [2128 SUS]
LED Characteristic
Color LED Characteristic Description
Green constant No error – Actuating
PVEH
T2
100 Spool Position
T0 T1
PFC (%)
Supply Voltage (UDC)
T0 Boot-up
T1 Neutral to max. spool pos.
T2 Max. spool pos. to neutral
0
Time
P301823
Fixed pos . v
0 Us [%]
50 100
(0.50 ∙ U dc) (0.75 ∙ U dc)
PVEH
PVEH
PVG 60 variants
Part number Type Connector IP Fault monitoring Functionality
11166910 PVEH 1x4 DIN 65 Active Float B-port