BN308C Led40s-6500 L120 Psu WH

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Lighting

Endura Next Batten


BN308C LED40S-6500 L120 PSU WH
With Philips Endura Next, customers have an industrial batten lighting solution that
makes a valuable contribution to the profitability of their business, providing both
operational and maintenance cost savings.By significantly reducing the energy
consumption, this solution contributes to a lower carbon footprint. At the same time,
the luminaire design ensures flicker free, consistent light output for the lifetime (50K
hrs.), thereby guaranteeing the optimal working conditions for employees. It
enhances productivity as well as takes care of safety of the employees. This unique
solution comes with a wide range of intelligent (DALI, PIR movement detection) and
networkable options such as Interact IoT enabled platform (both in Wired & Wireless
options).No matter what your requirement is “Endura Next” comes with endless
possibilities in this era of connected lighting and is specifically designed to minimize
downtime in operations.

Warnings and Safety


• Meant for use in Indoor environment only

Product data

General Information Material Steel

Beam angle of light source 120 ° Light source engine type LED

Light source color 865 cool daylight

Driver included Yes Operating and Electrical


Optic type 120 [ Beam angle 120°] Input Voltage 140-270 V

Optical cover/lens type Polycarbonate Input Frequency 50 Hz

Luminaire light beam spread 120° Power Factor (Min) 0.95

Control interface -

Protection class IEC Safety class I (I) Controls and Dimming


Flammability mark F [ For mounting on normally flammable Dimmable No

surfaces]

Warranty period 2 years

Datasheet, 2020, March 19 data subject to change


Endura Next Batten

Mechanical and Housing Power consumption tolerance +/-10%

Housing Material Steel

Optic material Polycarbonate Over Time Performance (IEC Compliant)


Optical cover/lens material Polycarbonate Median useful life L70B50 50000 h

Mounting device Surface & Suspended (Asymmetric/ Symmetric)

Color White Application Conditions


Ambient temperature range 0 to +45 °C

Approval and Application


Ingress protection code IP20 [ Finger-protected] Product Data
Mech. impact protection code IK02 [ 0.2 J standard] Order product name BN308C LED40S-6500 L120 PSU WH

Surge Protection (Common/Differential) Surge protection level until 4 kV Order code 919515812664

Numerator - Quantity Per Pack 1

Initial Performance (IEC Compliant) Numerator - Packs per outer box 6

Initial luminous flux (system flux) 4000 lm Material Nr. (12NC) 919515812664

Initial LED luminaire efficacy 120 lm/W Net Weight (Piece) 1.020 kg

Init. Corr. Color Temperature 6500 K

Init. Color Rendering Index >80

Initial chromaticity <5

Initial input power 34 W

Dimensional drawing

Indoor Luminaires

© 2020 Signify Holding All rights reserved. Signify does not give any representation or warranty as to the accuracy or

completeness of the information included herein and shall not be liable for any action in reliance thereon. The

information presented in this document is not intended as any commercial offer and does not form part of any

quotation or contract, unless otherwise agreed by Signify. Philips and the Philips Shield Emblem are registered www.lighting.philips.com

trademarks of Koninklijke Philips N.V. 2020, March 19 - data subject to change

You might also like