DATA SHEET

LinkSprinter ®

Pocket Network Tester

Overview
The LinkSprinter® Pocket Network Tester verifies functionality of copper Ethernet
links and identifies errors in less than 10 seconds. The tester ensures network
connectivity status and port information is documented for every link. The
comprehensive AutoTest measures PoE voltage; performs a switch link test; confirms
the DHCP server is running and responsive; and verifies default gateway/router, an IP
target, and cloud reachability. With the automated test results upload and annotation
workflow to the secure Link-Live cloud portal, job supervisors can easily manage the
progress of deployment and troubleshooting tasks of their team.
• Discover the nearest switch name and port information via CDP/LLDP/EDP, and
verify link speed/duplex and connectivity to TCP/IP networks
• Validate Power-over-Ethernet (PoE) voltage from power sourcing equipment (PSE)
according to 802.3af/at standards
• Light weight, fit in your pocket and replaces the need to bring laptop to verify
network connectivity
•   Automate reporting and enable collaboration with result upload and management
via Link-Live Cloud Services

Key Features

Results On Your Phone

LinkSprinter can be paired with a mobile device to reveal more information about the network test! First, connect to the
LinkSprinter as a short-range Wi-Fi access point. Then, open your browser on your mobile device and type in the address
172.16.9.9. The webpage will allow you to view more detailed information, such as port name, model, server address, and
more. When connected with Link-Live, you can also add comments to your testing results for further documentation.

LinkSprinter and Mobile Device Application Shot Test Results - Mobile View

1
 Cable Test
When paired with your mobile device, users can view a detailed depiction of
the cable it is connected to, showing each cable pair, cable length, and any
miswires such as opens, shorts, or split pairs.

Cable Test and Flash Port Split Pair detected with cable
available on Mobile UI length to open

Speed and Duplex

The LinkSprinter can test actual link speed against advertised speed of a switch. The Link Test
LED will turn yellow indicating a warning, and detail test results will show advertised verses
actual link speed when a Gigabit Switch port is only capable of linking at 100Mbps.
Not being able to connect can be caused by an open, short or split pair. Using the LinkSprinter,
users can further troubleshoot the problem by performing a cable test.

LinkSprinter Configured to test at 1

Gbps, but can only connect at 100

LinkSprinter Team Packs

The LinkSprinter was designed to be a personal tool allowing organizations to become more
efficient at problem identification and trouble ticket escalation from the PC help desk on up.
Outfit your entire staff. Team packs include quantities of 5 or 10 units at a discounted price
(See Models & Accessories for more information). The Holster is not included in the Team
Packs, so don’t forget to add those to your order!

LinkSprinter 5 Pack

Blink Link Light and Identify Switch Port Connected

Verify the connection path between the jack location and switch port using the LinkSprinter.
LinkSprinter will identify the switch name and port # by analyzing the CDP/LLDP packet from
the switch. It can blink the link light on the switch port it is connected to, allowing users to
identify the full connection path.

Switch Information
2
 Automated Test Results Management
Serving as a centralized test results and device management system,
the free Link-Live cloud service transforms team workflows with the
ability to quickly and easily log, document, and report test activity
from all LinkSprinter, LinkRunner AT, LinkRunner G2, AirCheck G2,
and OneTouch AT hand-held network testers. Once the instrument
is connected to the Link-Live Cloud service, your test results are
automatically uploaded to the dashboard for project management
and reporting. You have the option of uploading additional files,
screenshots, images, profiles, packet captures, location information,
and comments anytime. Also, certain NetAlly instruments with AllyCare
Support can receive firmware updates “over the network” from Link-
Live as they become available.
An API is available to retrieve and integrate data from Link-Live into other management platforms, such as your trouble-
ticket application or network management system. This gives you the ability to easily provide proof-of-performance and
better manage jobs and staff efficiency.
This unified dashboard of both wired and Wi-Fi network connectivity results enables you to:
• Reduce results management overhead for multiple testers and users
• Enables seamless collaboration between site personnel and remote experts
• Simplify report generation across media types for network deployment documentation
• Attach photos, user comments to each result, adding context for future changes and troubleshooting
• For asset management, ability to associate serial numbers of installed devices, and/or cable/walljack label to specific test
results

Ordering Guide
Model Number/Name Description
LSPRNTR-300 Includes: (1) LinkSprinter and wrist strap
LSPRNTR-300-5PK LinkSprinter Model 300 - 5PK
LSPRNTR-300-10PK LinkSprinter Model 300 - 10PK
LINKSOLUTIONS-KIT Includes: (1) LinkRunner AT - 2000 and (2) LinkSprinters
LR-G2-LS-KIT Includes: (1) LinkRunner G2 with Li-ION battery, power supply with regional power plugs, Wireview
wire mapper #1, Inline RJ-45 coupler, USB 2.0 to Micro USB cable, 8G Micro SD card, small soft case,
coupler, Quick Start guides, (2) LinkSprinters, and (2) LinkSprinter holsters.

Support
Model Number/Name Description
LR-G2-LS-KIT-1YS 1 year AllyCare Support for LR-G2-LS-KIT
LR-G2-LS-KIT-3YS 3 year AllyCare Support for LR-G2-LS-KIT

Accessories
Model Number/Name Description
LSPRNTR-HOLSTER LinkSprinter Holster with Test Cord

3
 General
Dimensions 4.36 in x 1.6 in x 1.28 in (11.07 cm x 4.06 cm x 3.25 cm)
Weight with batteries 0.255 lb (0.116 kg)
Cable length measurement
Environmental
Operating Temperature 32°F to 122°F (0°C to 50°C )
and Relative Humidity Relative Humidity 5% to 90% Non-condensing
Storage Temperature -4°F to 140°F (-20°C to 60°C)
Shock and vibration Random 2g, 5 Hz – 500 Hz (class 2), 1 m drop
Safety CAN/CSA-C22.2 No. 61010-1-12, UL Std. No. 61010-1 (3rd Edition), IEC61010-1:2010, Pollution
degree 2
Altitude

EMC EN 61326-1:2006

Wi-Fi Hot Spot

IEEE 802.11b/g
Frequency Channels 802.11 Channels 1 thru 11 (Default is 11)
Operating Frequency 2.412 ~ 2.484 GHz, ISM Band
Regulatory Domain EN 301 489-1/17
Browser Internet Explorer 9.0, Firefox 3.6, Chrome 5.0, Safari 5.1 (or later revisions)

Conforms to relevant European Union directives

Conforms to relevant Australian Safety and EMC standards.

Complies with 47 CFR Part 15 requirements of the U.S. Federal Communications Commission.
[1] This product meets requirements for industrial (Class A) electromagnetic wave equipment and the seller or user should take notice of it. This
equipment is intended for use in business environments and is not to be used in homes.
©2019 NetAlly. NetAlly® is a registered trademark of LinkRunner® LLC dba NetAlly. Third-party trademarks mentioned are the property of their respective owners.

LS-DS-19-V1

eudisa GmbH Telefon: +49 89 9041011-12

Maria-Merian-Strasse 8 E-Mail: [email protected]
85521 Ottobrunn b. München Website: www.eudisa.com

BERATUNG | SCHULUNG | SERVICE | WISSEN