Doppstadt Product Book

PRODUCT BOOK
2019
Best Solution. Smart Recycling. doppstadt.com

DOPPSTADT THE PRODUCT LINES
Your Requirements. Our solutions. Our solutions.
In our new Product Book we’d like to for innovation, versatility, efficiency, and logies and machines into tailor-made considered a substitute for the „hands-on The structure represents tailor- WINDROW TURNER LINE
introduce you our multifaceted soluti- user comfort. solutions from which you can generate experience“ though. Having said this, we made solutions from which our WATERSIFTER LINE
on range in the field of recycling and substantial advantages regarding func- invite you to get a picture of our proven customers can generate substantial WINDSIFTER LINE
environmental technology. One thing On the next level below our PRODUCT tionality and cost-effectiveness. competence in providing individual advantages regarding functionality WASH-TROMMEL LINE
that surely leaps out at you is the rear- LINES are structured according to recycling solutions. Doppstadt regularly and cost-effectiveness. WATER TREATMENT LINE
rangement of our portfolio, focussing principal use or functionality/mode of All of this provides a strong basis for exhibits at trade fairs and participates PRESS EXTRUDER LINE
on our skills and experience in providing operation. To each line the respective our ability to tackle the ever evolving in conferences around the world. There SLOW SPEED SHREDDER LINE MIXER LINE
tailor-made solutions to our customers. machine series have been assigned, challenges and requirements of the is plenty of opportunity to get in touch MID SPEED SHREDDER LINE HEAVY DUTY PULLEY LINE
giving you an easily comprehensible future. We’re conviced that only those with us! GRINDER LINE CONVEYOR LINE
The uppermost level is occupied by overview of the Doppstadt product market players able to provide quick KOMBI SHREDDER LINE SAND TRAP LINE
our PRODUCT GROUPS, e.g. “Smart range even when new technologies and and spot-on solutions will prevail over We hope you enjoy our new Product TROMMEL LINE LOG WASHER LINE
Shredding“, “Smart Chipping“, “Smart systems will be added successively. the long haul. Book and draw some inspiration from it! SPLITTER LINE SAND SCREW LINE
Screening“ – with the “Smart“ part STAR SCREEN LINE DEWATERING SCREEN LINE
echoing the Doppstadt slogan "Best The structure serves yet another pur- The new product guide is intended to give YOUR DOPPSTADT-TEAM FLATFLEX LINE FLAT SCREEN LINE
Solution. Smart Recycling." and our pose: It represents our almost unlimited you a first overall impression of what we CHIPPER LINE VIBRATING SCREEN LINE
motivation to continually raise the bar flexibility in combining basic techno- have to offer. It should by no means be SIDE TURNER LINE
PRODUCT BOOK 3
SLOW SPEED SHREDDER LINE MID SPEED SHREDDER LINE GRINDER LINE KOMBI SHREDDER LINE
SMART SHREDDING
INVENTHOR DW Mobile DW / CERON Stationary CURO KIMO AK Mobile AK/NZ Stationary DZ
TROMMEL LINE STAR SCREEN LINE SPLITTER LINE FLATFLEX LINE
SMART SCREENING
SM-Mobile 518 FLEX SST Stationary SM Stationary DST Unit HS SELECTOR
CHIPPER LINE
SMART CHIPPING
DH Mobile DH Stationary
SIDE TURNER LINE WINDROW TURNER LINE
SMART TURNING
DU SCARAB
WATERSIFTER LINE WINDSIFTER LINE
PRODUCT BOOK 2019
SMART SIFTING
SMART SHREDDING SMART CHIPPING SMART WASHING
SLOW SPEED SHREDDER LINE 7 CHIPPER LINE 61 WASH-TROMMEL LINE 89
MID SPEED SHREDDER LINE 18 WATER TREATMENT LINE 92
HDS WS/EASY
GRINDER LINE 21 SMART TURNING
KOMBI SHREDDER LINE 33 SIDE TURNER LINE 73 SMART SOLID LIQUID SEPERATION WATER TREATMENT LINE
WASH-TROMMEL LINE
WINDROW TURNER LINE 75 PRESS EXTRUDER LINE 97
SMART SCREENING
SMART WASHING
TROMMEL LINE 37 SMART SIFTING SMART MIXING
STAR SCREEN LINE 51 WATERSIFTER LINE 77 MIXER LINE 99
SPLITTER LINE 53 WINDSIFTER LINE 79
FLATFLEX LINE 56
Gritbuster Racoon Lamella Clarifier/ Integrated Lamella Clarifier
PRODUCT BOOK 5
SLOW
SLOW SPEED SHREDDER
SHREDDER LINE
LINE
SMART SHREDDING
SMART SHREDDING SHREDDER INVENTHOR TYPE 9
SLOW SPEED SHREDDER LINE Applications
KOMBI SHREDDER LINE
MID SPEED SHREDDER LINE
The INVENTHOR Typ 9 is suitable for a great variety of materials
such as waste wood, logs, roots, green waste, bio waste, domestic
GRINDER LINE
waste, bulky waste, commercial waste, mixed construction waste,
tyres, railroad ties and many more. For special shredding
requirements, the Doppstadt pre-shredder machines can be
combined with other systems, e.g. fine grinders or drum screen
machines.

DIMENSIONS
Chassis Semi-trailer
Total weight (kg) 32000 (Option SA) / 35000 (Option K)
Length (mm) 16786
Width (mm) 2500 (SA) / 3000 (K)
Height (mm) 5050 (SA) / 4890 (K)

Transport width (mm) 2500 (SA) / 3000 (K)
Transport height (mm) 3893 (SA) / 3685 (K)
Transport length (mm) 9971 (SA) / 9813 (K)
DRIVE Advantages
Engine type diesel engine
New drive concept includes direct, continuous power
Marke MTU 6R 1300
transmission based on patented „Vario DirectDrive“ system
Exhaust level EUROMOT IV / Tier IV final
The Vario DirectDrive eliminates motor load when the drum is
Motor power (kW / PS) 390 / 530 inactive and provides the required breakaway torque even from
Fuel tank (l) 950 standstill. It also enables the machine to free itself from wrap-
arounds without having to stop it.

Flexible grinding concept based on various grinding packages
Engine type 2 diesel engine (sizes S, M, L, XL) consisting of drum/teeth + tooth strip +
Marke MTU 6R 1300 Limiter, allowing for exact adaption to the respective material
Exhaust level EUROMOT III A requirements.
New door and chassis concept with large comb flap for easy
Motor power (kW / PS) 390 / 530
access to the entire grinding area.
DISCHARGE CONVEYOR Plug & Play: After folding out the conveyors into the working
Width (mm) 1200 position, the machine can be put into operation by pressing a
single button.
Length (mm) 8500
Outstanding monitoring concept for the entire shredding
Belt speed (m/s) 2,0 process
Height (mm) 5050 (SA) / 4890 (K) Reduced noise emissions
Two chassis options available, semi-trailer or track-mounted,
INFEED HOPPER
and various rear conveyor lengths, 7, 8.5, or 12 m (rigid), to
Loading height (mm) 3307 (Option SA) / 3095 (Option K)
realize maximum angles of repose
ROLLER
Number of rollers 1
Roller Length (mm) 3.000
Roller Diameter (mm) 600 / 800
Roller Speed (min-1) -5 to 32
Number of roller teeth Size S (145), M (100), L (42) or XL (28)
Werner Doppstadt Umwelttechnik GmbH & Co. KG | Steinbrink 13 | D-42555 Velbert | Deutschland | T: +49 (0)2052 8890 | [email protected] | doppstadt.com
Subject to technical changes - Specifications may be deviate PRODUCT BOOK 7
SLOW
SLOW SPEED SHREDDER
SHREDDER LINE
LINE SLOW
SLOW SPEED SHREDDER
SHREDDER LINE
LINE
SMART SHREDDING
SHREDDER DW 2060 K SHREDDER DW 3060 TYPE F
Applications Applications
The shredders of the DOPPSTADT DW series process waste wood, The shredders of the DOPPSTADT DW series process waste wood,
logs, roots, green waste, biowaste, garbage, bulky and industrial logs, roots, green waste, biowaste, garbage, bulky and industrial
waste, mixed construction waste and much more. For special waste, mixed construction waste and much more. For special
applications, the DW shredders can be easily combined with other applications, the DW shredders can be easily combined with other
Doppstadt products, such as grinders or screens. Doppstadt products, such as grinders or screens.

DIMENSIONS DIMENSIONS
Chassis Truck mounted Chassis 3-axle-trailer
Total weight (kg) 20000 Total weight (kg) 25000
Length (mm) 10300 Length (mm) 13245
Width (mm) 2300 Width (mm) 2550
Height (mm) 3000 Height (mm) 3304
Transport width (mm) 2300 Transport width (mm) 2550
Transport height (mm) 3721/3180 Transport height (mm) 3990
Transport length (mm) 7319/8470 Transport length (mm) 9792
DRIVE DRIVE
Engine type Diesel engine Engine type diesel engine
Marke Mercedes-Benz OM 926 LA Marke MTU 6R 1300

Exhaust level EUROMOT III A Exhaust level EUROMOT IV / Tier IV final
Motor power (kW / PS) 240 / 326 Motor power (kW / PS) 320 / 435
Fuel tank (l) 300 Fuel tank (l) 600
DISCHARGE CONVEYOR Advantages Advantages

Width (mm) 1000 Engine type 2 Mercedes Benz OM 460 LA
Maximum efficiency at lowest operating costs using a 100% Maximum efficiency at lowest operating costs using a 100%
Length (mm) 5000 Exhaust level EUROMOT III A
mechanical drive system and slow-going shredding technology mechanical drive system and slow-going shredding technology
Belt speed (m/s) 1 - 3,0 Fine shredding system „Limiter“ (additional equipment) Motor power (kW / PS) 315 / 428 Contaminant-resistant shredding by applying a pneumo-
Contaminant-resistant shredding by applying a pneumo- hydraulic counter comb
Height (mm) 3023 DISCHARGE CONVEYOR
hydraulic counter comb Optionally available contaminant-resistant fine-shredding
DISCHARGE CONVEYOR Integrated limitation of grain size using the Limiter system
Width (mm) 1200
system "Limiter"
Length (mm) 5000 / 5500 Optimization of shredding results by choosing from a great Length (mm) 5500 The application of different tooth sizes and shredding packages
Width (mm) 1000 variety of shredding packages Belt speed (m/s) 1,5 - 3 (3,8) in one machine widens the range of possible grain sizes
Maximum movability thanks to an extra robust track-mounted Integrated limitation of grain size using the Limiter system
Belt speed (m/s) 1 - 3,0 Height (mm) 3304
chassis allowing for two driving speeds Optionally available near-mesh grain separator HS 401
INFEED HOPPER INFEED HOPPER "Selector" to realize finished end products without unwanted
Loading width (mm) 3000 Loading width (mm) 4040 fine grain portions
Loading height (mm) 2813 Loading height (mm) 2900* Finished end products without oversized materials using the
rear star screen system "Selector" (1l Diesel fuel/t)
ROLLER ROLLER Maximum operational safety based on the simple machine
Number of rollers 1 Number of rollers 1 setup and the experience gained from more than 1.000 DW
Roller Length (mm) 2000 Roller Length (mm) 3.000 units currently operated in the various markets
Roller Diameter (mm) 600 / 800 Roller Diameter (mm) 600 / 800
Roller Speed (min-1) 27 Roller Speed (min-1) 31
Number of roller teeth Size L=21, M=125, BioPower=42 Number of roller teeth Size L = 21, M = 125, S = 145
Werner Doppstadt Umwelttechnik GmbH & Co. KG | Steinbrink 13 | D-42555 Velbert | Deutschland | T: +49 (0)2052 8890 | [email protected] | doppstadt.com Werner Doppstadt Umwelttechnik GmbH & Co. KG | Steinbrink 13 | D-42555 Velbert | Deutschland | T: +49 (0)2052 8890 | [email protected] | doppstadt.com
Subject to technical changes - Specifications may be deviate Subject to technical changes - Specifications may be deviate PRODUCT BOOK 9
SLOW
SLOW SPEED SHREDDING LINE
SHREDDER LINE SLOW SPEED SHREDDING LINE
SHREDDER LINE
SMART SHREDDING
SHREDDER DW 3060 TYPE F - BIOPOWER SHREDDER DW 3060 K TYPE F
The shredders of the DOPPSTADT DW series process waste wood, The shredders of the DOPPSTADT DW series process waste wood,
logs, roots, green waste, biowaste, garbage, bulky and industrial logs, roots, green waste, biowaste, garbage, bulky and industrial
waste, mixed construction waste and much more. For special waste, mixed construction waste and much more. For special
applications, the DW shredders can be easily combined with other applications, the DW shredders can be easily combined with other
Doppstadt products, such as grinders or screens. Doppstadt products, such as grinders or screens.

Chassis 3-axle-trailer Chassis Steel-tracks
Transport height (mm) 3951 Transport height (mm) 3329
Transport length (mm) 9792 Transport length (mm) 10360
DRIVE DRIVE
Engine type Diesel engine Engine type diesel engine
Make MTU 6R 1300 Make MTU 6R 1300

Exhaust level EUROMOT IV / Tier IV final Exhaust level EUROMOT IV / Tier IV final
Fuel tank (l) 600
Advantages Fuel tank (l) 600
Advantages
Torque (Nm) 2300 DISCHARGE CONVEYOR
Maximum efficiency at lowest operating costs using a 100% Width (mm) 1200 Maximum efficiency at lowest operating costs using a 100%
Engine type 2 Dieselengine Daimler OM 460LA mechanical drive system and slow-going shredding technology Length (mm) 7000 mechanical drive system and slow-going shredding technology
Contaminant-resistant shredding by applying a pneumo- Contaminant-resistant shredding by applying a pneumo-
Exhaust level EUROMOT III A Belt speed (m/s) 1,5 - 3 (3,8)
hydraulic counter comb hydraulic counter comb
Torque (Nm) 2200 Optionally available contaminant-resistant fine-shredding Height (mm) 4222
Optionally available contaminant-resistant fine-shredding
system "Limiter"
DISCHARGE CONVEYOR INFEED HOPPER system "Limiter", integrated limitation of grain size using the
The application of different tooth sizes and shredding packages Limiter system
Width (mm) 1404 Loading width (mm) 4040
in one machine widens the range of possible grain sizes The application of different tooth sizes and shredding packages
Length (mm) 5500 Integrated limitation of grain size using the Limiter system Loading height (mm) 2825*
in one machine widens the range of possible grain sizes
Belt speed (m/s) 1,5 - 3 (3,8) Optionally available near-mesh grain separator HS 401 and HS ROLLER Optionally available near-mesh grain separator HS 401
Height (mm) 3304 800 "Selector" to realize finished end products without Number of rollers 1 "Selector" to realize finished end products without unwanted
unwanted fine grain portions fine grain portions
INFEED HOPPER Finished end products without oversized materials using the
Roller Length (mm) 3000
Finished end products without oversized materials using the
Loading width (mm) 4040 rear star screen system "Selector" (1l Diesel fuel/t) Roller Diameter (mm) 600 / 800
rear star screen system "Selector" (1l Diesel fuel/t)
Loading height (mm) 2900* Maximum operational safety based on the simple machine Roller Speed (min-1) 31 Maximum operational safety based on the simple machine
setup and the experience gained from more than 1.000 DW setup and the experience gained from more than 1.000 DW
ROLLER units currently operated in the various markets
Number of roller teeth Size XL = 14, L = 21, M = 125, S = 145
units currently operated in the various markets
Number of rollers 1
Maximum movability thanks to an extra robust track-mounted
Roller Length (mm) 3000 chassis allowing for two driving speeds
Roller Speed (min-1) 28
Number of roller teeth Size L = 42, M = 125, S = 145
PRODUCT BOOK 11
Subject to technical changes - Specifications may be deviate Subject to technical changes - Specifications may be deviate
SLOW
SLOW SPEED SHREDDING LINE
SHREDDER LINE SLOW
SLOW SPEED SHREDDER
SHREDDER LINE
LINE
SMART SHREDDING
SHREDDER DW 3060 K TYPE F - BIOPOWER SHREDDER DW 2060 E STATIONÄR
The shredders of the DW series process waste wood, logs, roots, The shredders of the DW series process waste wood, logs, roots,
green waste, biowaste, garbage, bulky and industrial waste, mixed green waste, biowaste, garbage, bulky and industrial waste and
construction waste and much more. For special applications, the much more. The DW shredders are suitable for all task in the areas
DW shredders can be easily combined with other Doppstadt of mechanical-biological recycling, biomass, surrogate fuels, and
products, such as grinders or screens. demolition of disposal sites.

Chassis Steel-tracks Chassis Static
DRIVE DRIVE

Engine type diesel engine Engine type AC Motor
Make MTU 6R 1300 Motor power (kW / PS) 132 / 180

Exhaust level
Motor power (kW / PS)
EUROMOT IV / Tier IV final
360 / 490
Advantages
Engine type 2 AC Motor
Fuel tank (l) 600 Motor power (kW / PS) 160 / 218
Advantages
Maximum efficiency at lowest operating costs using a 100%
mechanical drive system and slow-going shredding technology
Torque (Nm) 2300 DISCHARGE CONVEYOR
Contaminant-resistant shredding by applying a pneumo-
Width (mm) 800
hydraulic counter comb The DW 2060 E is universal applicable in shredding of various
Engine type 2 Mercedes diesel engine OM 460 LA Optionally available contaminant-resistant fine-shredding Height (mm) 750
materials and he is providing the flexibility of larger DW models
Exhaust level EUROMOT III A system "Limiter", integrated limitation of grain size using the DISCHARGE CONVEYOR in confined space.
Limiter system Versatile for use thanks to a great setup variety, a wide range of
DISCHARGE CONVEYOR Length (mm) 3200 or 6300
The application of different tooth sizes and shredding packages tooth shapes, drive gear systems, stands or lower belt
in one machine widens the range of possible grain sizes conveyors.
Length (mm) 7000 Optionally available near-mesh grain separator HS 401 and HS ROLLER New drive technology with rotary current motor and frequency
Belt speed (m/s) 1,5 - 3 (3,8) 800 "Selector" to realize finished end products without Number of rollers 1 converter. Less laborious maintenance compared to the the
unwanted fine grain portions previous model.
Height (mm) 4222 Roller Length (mm) 2000
Finished end products without oversized materials using the Very good speed-torque behaviour, because the torque is
INFEED HOPPER rear star screen system "Selector" (1l Diesel fuel/t) Roller Diameter (mm) 600
increased under load and in case of speed drop (comparable
Loading width (mm) 4040 Maximum operational safety based on the simple machine Roller Speed (min-1) 23 with a Vario gearbox from the Inventhor series).
Loading height (mm) 2825* setup and the experience gained from more than 1.000 DW Number of roller teeth 14 Even suited for very dusty environments because the rotary
units currently operated in the various markets current motor is resistant to dust.
ROLLER Maximum movability thanks to an extra robust track-mounted Solid machine chassis guarantees long life time.
Number of rollers 1 chassis allowing for two driving speeds Customizable for many different installations both new and
Roller Length (mm) 3000 existing.
Roller Speed (min-1) 28
Number of roller teeth Size XL=14, L BioP.=42, M=125, S=145
Subject to technical changes - Specifications may be deviate
SLOW
SLOW SPEED SHREDDER
SHREDDER LINE
LINE SLOW
SLOW SPEED SHREDDER
SHREDDER LINE
LINE
SMART SHREDDING
SHREDDER CERON TYPE 206 SHREDDER CERON TYPE 256
The shredders of the CERON series process waste wood, logs, roots, The shredders of the CERON series process waste wood, logs, roots,
green waste, biowaste, garbage, bulky and industrial waste, mixed green waste, biowaste, garbage, bulky and industrial waste, mixed
construction waste and much more. The shredders of the CERON construction waste and much more. The shredders of the CERON
series are suitable for all task in the areas of mechanical-biological series are suitable for all task in the areas of mechanical-biological
recycling, biomass, surrogate fuels, and demolition of disposal sites. recycling, biomass, surrogate fuels and demolition of disposal sites.

Chassis Static Chassis Static
DRIVE DRIVE
Engine type Three-phase motor Engine type Three-phase motor
Motor power (kW / PS) 132, 200, 315, 400 / 180, 272, 428, 544 Motor power (kW / PS) 132, 200, 315, 400 / 180, 272, 428, 544
ROLLER ROLLER
Number of rollers 1 Number of rollers 1
Roller Length (mm) 2000 Roller Length (mm) 2500

Roller Diameter (mm) 600 / 800 Roller Diameter (mm) 600 / 800
Number of roller teeth depending on the equipment Number of roller teeth depending on the equipment
Advantages
Universally applicable – shredding of various materials
Versatile for use thanks to a great setup variety, a wide range of
tooth shapes, drive gear systems, stands or lower belt
conveyors
Low energy consumption through efficient, frequency-
Advantages controlled direct drive
Solid machine chassis guarantees long life time
Service and maintenance-friendly thanks to the comb flap gate
Universally applicable – shredding of various materials
enabling a direct access to the shredding tools. The shredding
roller can be driven in inching operation thus facilitating the
tool change.
conveyors
Customizable for many different installations both new and
Low energy consumption through efficient, frequency-
existing
controlled direct drive
enabling a direct access to the shredding tools. The shredding
roller can be driven in inching operation thus facilitating the
tool change.
existing
SLOW
SLOW SPEED SHREDDER
SHREDDER LINE
LINE SLOW
SLOW SPEED SHREDDER
SHREDDER LINE
LINE
SMART SHREDDING
SHREDDER CERON TYPE 306 SHREDDER CERON TYPE 308
The shredders of the CERON series process waste wood, logs, roots, The shredders of the CERON series process waste wood, logs, roots,
green waste, biowaste, garbage, bulky and industrial waste, mixed green waste, biowaste, garbage, bulky and industrial waste, mixed
construction waste and much more. The shredders of the CERON construction waste and much more. The CERON shredders are
series are suitable for all task in the areas of mechanical-biological suitable for all task in the areas of mechanical-biological recycling,
recycling, biomass, surrogate fuels and demolition of disposal sites. biomass, surrogate fuels, and demolition of disposal sites.

Total weight (kg) 28000 Total weight (kg) 38000-45000
DRIVE Transport width (mm) 3072

Engine type Three-phase motor Transport height (mm) 3045
Motor power (kW / PS) 315, 400 / 428, 544 Transport length (mm) 7425
ROLLER DRIVE

Number of rollers 1 Engine type AC Motor
Roller Length (mm) 3000 Motor power (kW / PS) 315 / 428

Roller Diameter (mm) 600 / 800 Installed power (kW) 350, depending on the equipment
Number of roller teeth depending on the equipment Torque (Nm) 2000 Advantages
Energy efficiency IE3
Advantages
New drive technology with rotary current motor and frequency
converter.
Engine type 2 AC Motor
Driven by robust straight bevel gear pair and belt drive. Several
Universally applicable – shredding of various materials Motor power (kW / PS) 450 / 611 gear reductions available, easy change of the motor belt pulley.
Torque (Nm) 2900 Very good speed-torque behaviour, because the torque is
increased under load and in case of speed drop (comparable
conveyors INFEED HOPPER with a Vario gearbox from the Inventhor series).
Low energy consumption through efficient, frequency- Loading width (mm) 3640 Modular design of the machine making more equipment
controlled direct drive
Loading height (mm) 3930 depending on steel framework variants available. Shredding systems M, L and XL.
Service and maintenance-friendly thanks to the comb flap gate ROLLER enabling a direct access to the shredding tools. The shredding
enabling a direct access to the shredding tools. The shredding Number of rollers 1 roller can be driven in inching operation thus facilitating the
roller can be driven in inching operation thus facilitating the Roller Length (mm) 3000 tool change.
tool change.
Roller Diameter (mm) 800 / 1000 Robust frame design, weight depending on the equipment up
to 45 tons.
existing Roller Speed (min-1) 13-15, depending on the equipment
Even suited for very dusty environments because the rotary
Number of roller teeth depending on the equipment current motor is resistant to dust.
Automatic reversing of the shredding roller in case of overload.
The machine reverses automatically and then changes to
forward running again.
MID
MID SPEED
SPEEDSHREDDING LINE
SHREDDER LINE MID
MID SPEED
SPEEDSHREDDER
SHREDDERLINE
LINE
SMART SHREDDING
SHREDDER CURO TYPE 250 SHREDDER KIMO TYPE 16
The secondary shredder CURO Type 250 produces fine shredded The KIMO Type 16 shreds a wide range of feed material: from high-
material e.g. for use as refuse derived fuel, or can be used for the calorific lightweight packaging to aluminium or copper scrap.
shredding of pre-sorted municipal and industrial waste mostly Accordingly, it serves to define the grain size of RDF for ideal
composed of plastic film. combustion or is used for the disintegration comminution for
example of cable scrap.

DRIVE DRIVE
Engine type electric Engine type electric
ROLLER ROLLER
Roller Speed (min-1) 100-350 Roller Speed (min-1) 250
INFEED HOPPER INFEED HOPPER

Loading width (mm) 2000 Loading width (mm) 1630
Loading height (mm) 2978 Loading height (mm) 3360

ROLLER ROLLER
Number of rollers 1 Number of rollers 1 Advantages
Roller Speed (min-1) 100-350
Advantages Roller Speed (min-1)
Number of roller teeth
250
40
Low operating cost due long service live, low power
Number of roller teeth 48
consuption, and low spare part cost.
Robust machine frame High throughput due to high tool holder and thus more
Load sensing feeding via hydraulic pusher system capacity of the processing chamber
Able to start up with full processing chamber Large power reserves due to high momentum of inertia (largest
Easily changeable tools by means of simple bolt connections on rotor in the market)
the rotor and stator tools Heavy machine frame makes anchors to the floor redundant
High efficiency due to large rotor mass
Shear pin coupling on rotor drive protects the machine against
damage from foreign objects
Variable rotor speed from 100 to 350 rpm
Easy access due to large maintenance doors
MID
MID SPEED
SPEEDSHREDDING LINE
SHREDDER LINE GRINDER
GRINDER LINE
LINE
SMART SHREDDING
SHREDDER KIMO TYPE 20 SHREDDER AK 310 ECOPOWER
The KIMO Type 20 is the largest secondary shredder offered by The universal grinders of the Doppstadt AK series process green
Doppstadt. It can not only shred high-calorific lightweight waste, yard waste, biowaste, pre-shredded logs and roots, waste
packaging and plastic film. Even harder cases such as aluminum or wood and wooden pallets. For special applications, the AK grinders
copper scrap are a breeze to work with this cutting mill. The can be combined with other Doppstadt products, such as shredders
secondary shredding step ensures a defined combustion and larger or screening machines.
surface area in the case of processing refuse derived fuels. In cable
scrap and similar applications, the goal is mostly to disintegrate
clusters of different substances and then separate them in
subsequent processing steps.

Chassis Static Chassis 2-axle-trailer

Engine type electric Transport height (mm) 3080
Motor power (kW / PS) 315 / 428 Transport length (mm) 9240
ROLLER DRIVE
Roller Speed (min-1) 250 Engine type Diesel engine
INFEED HOPPER Marke MTU 6R 1000
Loading width (mm) 2020 Exhaust level Euromot IV / Tier IV final
Loading height (mm)
ROLLER
3360 Motor power (kW / PS)
Fuel tank (l)
230 / 310
300
Advantages
Number of rollers 1 Torque (Nm) 1250 Nm at 1200-1600 rpm Compact construction, contaminant-restistant
Roller Speed (min-1) 250 Advantages Ideal for smaller facilities
Number of roller teeth 50 Marke MTU 6R 1000 free-swinging flails of the flail drum (gyrating mass appr. 1,3 t
Low operating cost due long service live, low power (2,866 lb) are provided with easily individual replaceable flail
Exhaust level Euromot III A
consuption, and low spare part cost. tips that can be adjusted to the materials to be grinded (e.g.
Motor power (kW / PS) 230 / 310 hard metal or armoured tips)
High throughput due to high tool holder and thus more
capacity of the processing chamber Torque (Nm) 1250 Nm at 1200-1600 rpm Quickly replaceable tools, Easy maintenance, One-man
Large power reserves due to high momentum of inertia (largest operation
DISCHARGE CONVEYOR Quick refitting for other materials
rotor in the market)
Width (mm) 1500
Heavy machine frame makes anchors to the floor redundant continuous grinding by means of load-sensing material in-feed
Length (mm) 6190* (*option) Discharge conveyor with length of 6 m* (*option)
Belt speed (m/s) 2 replaceable grinding basket*, the mesh size (30 – 320 mm / 1.2
– 12.6'') determines the material grain size, (*option)
Height (mm) 3550
FLAIL DRUM
Width (mm) 1470
Diameter (mm) 900
Speed (min-1) 1140 - 1320 rpm (dep. on engine speed)
Number of Flail teeth 16/28
INFEED HOPPER
Loading width (mm) 2730
Loading height (mm) 2080
GRINDER
GRINDER LINE
LINE GRINDER
GRINDER LINE
LINE
SMART SHREDDING
SHREDDER AK 510 K BIOPOWER SHREDDER AK 560 ECOPOWER
The grinders of the Doppstadt AK series process green waste, yard The universal grinders of the Doppstadt AK series process green
waste, biowaste, pre-shredded logs and roots, waste wood and waste, yard waste, biowaste, pre-shredded logs and roots, waste
wooden pallets. For special applications, the AK grinders can be wood and wooden pallets. For special applications, the AK grinders
combined with other Doppstadt products, such as shredders or can be combined with other Doppstadt products, such as shredders
screening machines. or screening machines.

Chassis Steel-tracks Chassis 2-axle-trailer
DRIVE DRIVE
Engine type diesel engine Engine type diesel engine
Marke Mercedes Benz OM 460 LA Marke MTU 6R 1300
Exhaust level Euromot III A Exhaust level Euromot IV / Tier IV final
Motor power (kW / PS) 375 / 510 Advantages Motor power (kW / PS) 390 / 530
Fuel tank (l)
Torque (Nm)
600
2150 Nm bei 1300 rpm continuous grinding by means of load-sensing material in-feed
Fuel tank (l)
Torque (Nm)
450
2460 Nm at 1300 rpm
Advantages
resistant against contaminants thanks to free-swinging flails
DISCHARGE CONVEYOR free-swinging flails of the flail drum (gyrating mass appr. 2,5 t
Separate power unit for feeder
Width (mm) 1500 (5,512 lb), easily and individual replaceable flail tips that can be Engine type 2 Mercedes Benz OM 460 LA.E3A resistant against contaminants thanks to free-swinging flails
Length (mm) 7000 adjusted to the materials to be grinded (e.g. hard metal or Exhaust level Euromot III A Short set-up time, easy maintenance
armoured tips) One-man operation
Belt speed (m/s) 1,6 Motor power (kW / PS) 375 / 510
easy one-man operation (remote control* of all main functions), Discharge conveyor with length of 4 m* "classic" or 6 m* "light"
Height (mm) 4570 Torque (Nm) 2150 Nm at 1300 rpm (*option)
the machine can be moved easy via tracklaying chassis, * option
FLAIL DRUM replaceable grinding basket*, the mesh size (30 – 400 mm / 1.2 DISCHARGE CONVEYOR continuous grinding by means of load-sensing material in-feed
– 15.75'') determines the material grain size, * option free-swinging flails of the flail drum (gyrating mass appr. 2,5 t
(5,512 lb) are provided with easily individual replaceable flail
Diameter (mm) 1120 Length (mm) 4000* oder 6000* (*optional) tips that can be adjusted to the materials to be grinded (e.g.
Speed (min-1) 850 -1000 rpm (dep. on engine speed) Belt speed (m/s) 2 hard metal or armoured tips)
Number of Flail teeth 36 Height (mm) 3000 replaceable grinding basket*, the mesh size (30 – 400 mm / 1.2
– 15.75'') determines the material grain size, (*option)
INFEED HOPPER FLAIL DRUM
Loading width (mm) 2670 Width (mm) 1750
Loading height (mm) 2220 Diameter (mm) 1120
Speed (min-1) 850-1000 rpm (dep. on engine speed)
Number of Flail teeth 36
INFEED HOPPER
GRINDER
GRINDER LINE
LINE GRINDER
GRINDER LINE
LINE
SMART SHREDDING
SHREDDER AK 560 ECOPOWER PLUS SHREDDER AK 635 K ECOPOWER
The universal grinders of the Doppstadt AK series process green The universal grinders of the Doppstadt AK series process green
waste, yard waste, biowaste, pre-shredded logs and roots, waste waste, yard waste, biowaste, pre-shredded logs and roots, waste
wood and wooden pallets. For special applications, the AK grinders wood and wooden pallets. For special applications, the AK grinders
can be combined with other Doppstadt products, such as shredders can be combined with other Doppstadt products, such as shredders
or screening machines. or screening machines.

Chassis 3-axle-trailer Chassis Steel-tracks
DRIVE DRIVE
Engine type Dieselmotor Engine type diesel engine

Marke MTU 6R 1300 Marke MTU 6R 1500

Exhaust level Euromot IV / Tier IV final Exhaust level Euromot IV / Tier IV final
Fuel tank (l) 600 Fuel tank (l) 750 Advantages
Torque (Nm) 2460 Nm at 1300 rpm Advantages Torque (Nm) 2900 Nm at 1300 rpm
Easy one-man operation (remote control of all main functions),
Separate power unit for feeder the machine can be moved easy via tracklaying chassis, high off-
Engine type 2 Mercedes Benz OM 460 LA.E3A Engine type 2 MTU 6R 1500
resistant against contaminants thanks to free-swinging flails road mobility
Exhaust level Euromot III A Short set-up time Exhaust level Euromot III A continuous grinding with maximum performance by means of
Motor power (kW / PS) 375 / 510 One-man operation Motor power (kW / PS) 460 / 625 load sensing material in-feed
Easy maintenance contaminant resistant thanks to free-swinging flails
Torque (Nm) 2150 Nm at 1300 rpm Torque (Nm) 2900 Nm at 1300 rpm
continuous grinding by means of load-sensing material in-feed large protection doors on either side and centralized lubrication
DISCHARGE CONVEYOR free-swinging flails of the flail drum (gyrating mass appr. 2,5 t DISCHARGE CONVEYOR points for easy maintenance and short set-up time
Width (mm) 1800 (5,512 lb) are provided with easily individual replaceable flail Width (mm) 1500 8 m long rear discharge conveyor belt with 5 m drop height by
Length (mm) 6000 tips that can be adjusted to the materials to be grinded (e.g. Length (mm) 8000 default – and an anti-magnetic centerpiece included in rear
hard metal or armoured tips) discharge conveyor belt
Belt speed (m/s) 2 Belt speed (m/s) 2
replaceable grinding basket*, the mesh size (30 – 400 mm / 1.2 separate power unit for feeder
Height (mm) 4200 – 15.75'') determines the material grain size, * option Height (mm) 5150 free-swinging flails of the flail drum (gyrating mass appr. 2,5 t
FLAIL DRUM FLAIL DRUM (5,512 lb) are provided with easily individual replaceable flail
tips that can be adjusted to the materials to be grinded (e.g.
hard metal or armoured tips)
Diameter (mm) 1120 Diameter (mm) 1120 replaceable grinding basket*, the mesh size (30 – 400 mm / 1.2
Speed (min-1) 850-1000 rpm (dep. on engine speed) Speed (min-1) 970-1140 rpm (dep. on engine speed) – 15.75'') determines the material grain size, * option
Number of Flail teeth 36 Number of Flail teeth 36
INFEED HOPPER INFEED HOPPER

Loading width (mm) 2670 Loading width (mm) 3500
Loading height (mm) 2200 Loading height (mm) 2220
GRINDER
GRINDER LINE
LINE GRINDER
GRINDER LINE
LINE
SMART SHREDDING
SHREDDER AK 635 SA ECOPOWER SHREDDER AK 235 E
The universal grinders of the Doppstadt AK series process green The stationary grinder AK 235 E can be used to grind biowaste and
waste, yard waste, biowaste, pre-shredded logs and roots, waste green waste in composting plants, for different qualities of wood in
wood and wooden pallets. For special applications, the AK grinders waste wood processing plants, in biomass processing plants and for
can be combined with other Doppstadt products, such as shredders various grinding tasks in the field of recycling.
or screening machines.

Chassis Semi-trailer Chassis Static
Total weight (kg) 32000 Total weight (kg) Approx. 14000
DRIVE DRIVE
Engine type diesel engine Engine type AC-motor frequency driven
Marke MTU 6R 1500 Make ABB

Exhaust level Euromot IV / Tier IV final Motor power (kW / PS) 160 / 218
Motor power (kW / PS) 460 / 625 Installed power (kW) 180
Fuel tank (l) 900 Torque (Nm) 2000

Advantages
Advantages
Torque (Nm) 2900 Nm at 1300 rpm messages.cEffizienz IE3

Continuous grinding with maximum performance by means of
DISCHARGE CONVEYOR
Engine type 2 MTU 6R 1500 Length (mm) 5000
load sensing material in-feed Continuous grinding by means of load sensing material in-feed
Exhaust level Euromot III A 6 m feeding hopper and 8 m long discharge conveyor Width (mm) 1200 Resistance against extraneous material due to free swinging
Motor power (kW / PS) 460 / 625 Contaminant resistant thanks to free-swinging flails Belt speed (m/s) 0,5 flails, compensating counter rasp and sieve-baskets
Easy one-man operation and short set-up time Rapid exchange system for the meshed sieve-baskets
Torque (Nm) 2900 Nm at 1300 rpm FLAIL DRUM
Large protection doors on either side and centralized Large selection of accessories and grinding tools
DISCHARGE CONVEYOR lubrication points for easy maintenance Width (mm) 1430
Width (mm) 1500 Separate power unit for feeder Diameter (mm) 900
Length (mm) 8000 free-swinging flails of the flail drum (gyrating mass appr. 2,5 t
Speed (min-1) 1430
(5,512 lb) are provided with easily individual replaceable flail
Belt speed (m/s) 2 Number of Flail teeth 16/28
tips that can be adjusted to the materials to be grinded (e.g.
Height (mm) 5200 hard metal or armoured tips)
replaceable grinding basket*, the mesh size (30 – 400 mm / 1.2
FLAIL DRUM
– 15.75'') determines the material grain size, * option
Width (mm) 1750
Diameter (mm) 1120
Speed (min-1) 970-1140 rpm (dep. on engine speed)
Number of Flail teeth 36
INFEED HOPPER
GRINDING LINE
GRINDER LINE GRINDING LINE
GRINDER LINE
SMART SHREDDING
SHREDDER AK 440 VE SHREDDER AK 540 VE
The stationary grinder AK 440 VE can be used to grind biowaste The stationary grinder AK 540 VE can be used to grind biowaste
and green waste in composting plants, for different qualities of and green waste in composting plants, for different qualities of
wood in waste wood processing plants, in biomass processing wood in waste wood processing plants, in biomass processing
plants and for various grinding tasks in the field of recycling. plants and for various grinding tasks in the field of recycling.

Total weight (kg) Approx. 22000 Total weight (kg) Approx. 22000
DRIVE DRIVE
Engine type AC-motor frequency driven Engine type AC-motor frequency driven
Make ABB Make ABB
Motor power (kW / PS) 250 / 340 Motor power (kW / PS) 315 / 430 Advantages
Installed power (kW) 270 Advantages Installed power (kW) 335
Torque (Nm) 2000 Torque (Nm) 2000 Main drive, scraper floor and feed-in drum are precisely
Main drive, scraper floor and feed-in drum are precisely coordinated and controlled by frequency converter thus
messages.cEffizienz IE2 messages.cEffizienz IE2
coordinated and controlled by frequency converter thus ensuring an optimal utilization of the machine and a continuous
DISCHARGE CONVEYOR ensuring an optimal utilization of the machine and a continuous DISCHARGE CONVEYOR material infeed by direct, electric load-sensing of the drive units.
Length (mm) 6000 material infeed by direct, electric load-sensing of the drive units. Length (mm) 6000 Flail rows topologically overlap for a better grinding result
Flail rows topologically overlap for a better shredding result Free swinging flails, retracting in case of contaminants
Free swinging flails, retracting in case of contaminants Quick-changing system for the baskets
Belt speed (m/s) 0,5 Quick-changing system for the baskets Belt speed (m/s) 0,5 Optimized safety system with sensor-less standstill monitoring
Loading height (mm) 3.046 using a 900 mm steel framework Optimized safety system with sensor-less standstill monitoring Loading height (mm) 3.046 using a 900 mm steel framework Easy transport, because the machine is delivered ready
Easy transport, because the machine is delivered ready assembled with base frame and discharge conveyor in one.
FLAIL DRUM FLAIL DRUM
assembled with base frame and discharge conveyor in one. Quick mounting and commissioning thanks to BUS control.
Quick mounting and commissioning thanks to BUS control. Therefore reduction of the required cable routing.
Diameter (mm) 1120 Therefore reduction of the required cable routing. Diameter (mm) 1120
Speed (min-1) 1000 Speed (min-1) 1000
Number of Flail teeth 36 Number of Flail teeth 36
PRODUCT BOOK 29
GRINDING LINE
GRINDER LINE GRINDING LINE
GRINDER LINE
SMART SHREDDING
SHREDDER AK 640 VE SHREDDER AK 640 L VE
The stationary grinder AK 640 VE can be used to grind biowaste The stationary grinder AK 640 L VE can be used to grind biowaste
and green waste in composting plants, for different qualities of and green waste in composting plants, for different qualities of
wood in waste wood processing plants, in biomass processing wood in waste wood processing plants, in biomass processing
plants and for various grinding tasks in the field of recycling. plants and for various grinding tasks in the field of recycling.

Total weight (kg) Approx. 22000 Total weight (kg) Approx. 28000
DRIVE DRIVE
Engine type AC-motor frequency driven Engine type AC-motor frequency driven
Make ABB

Make ABB Advantages
Installed power (kW) 470 Installed power (kW) 470 Main drive, scraper floor and feed-in drum are precisely
Advantages
coordinated and controlled by frequency converter thus
Torque (Nm) 2800 Torque (Nm) 2800
ensuring an optimal utilization of the machine and a continuous
DISCHARGE CONVEYOR DISCHARGE CONVEYOR material infeed by direct, electric load-sensing of the drive units.
Length (mm) 6000 Main drive, scraper floor and feed-in drum are precisely Length (mm) 6000 Flail rows topologically overlap for a better grinding result
coordinated and controlled by frequency converter thus Free swinging flails, retracting in case of contaminants
ensuring an optimal utilization of the machine and a continuous Quick-changing system for the baskets
Belt speed (m/s) 0,5 Belt speed (m/s) 0,5 Optimized safety system with sensor-less standstill monitoring
material infeed by direct, electric load-sensing of the drive units.
Loading height (mm) 3.046 using a 900 mm steel framework Flail rows topologically overlap for a better grinding result Loading height (mm) 3046 using a 900 mm steel framework Easy transport, because the machine is delivered ready
Free swinging flails, retracting in case of contaminants assembled with base frame and discharge conveyor in one.
FLAIL DRUM FLAIL DRUM
Quick-changing system for the baskets Quick mounting and commissioning thanks to BUS control.
Optimized safety system with sensor-less standstill monitoring Therefore reduction of the required cable routing.
Diameter (mm) 1120 Easy transport, because the machine is delivered ready Diameter (mm) 1120
Speed (min-1) 1000 assembled with base frame and discharge conveyor in one. Speed (min-1) 1000
Number of Flail teeth 36 Quick mounting and commissioning thanks to BUS control. Number of Flail teeth 36
Therefore reduction of the required cable routing.
INFEED HOPPER
PRODUCT BOOK 31
GRINDER
GRINDER LINE
LINE KOMBI
KOMBI SHREDDER
SHREDDERLINE
LINE
SMART SHREDDING
SHREDDER NZ 180 VE SHREDDER-GRINDER DZ 750 E
The stationary grinder NZ 180 VE can be used to grind biowaste and The multi-purpose shredders of the DOPPSTADT DZ series process
green waste in composting plants, for different qualities of wood in waste wood, root wood and green waste. The combination of a
waste wood processing plants and in biomass processing plants and slow-going, contaminant-resistant pre-shredding system and a
for various grinding tasks in the field of recycling. downstream high-speed post-processing system makes for the
perfect solution for the most demanding shredding tasks.

DIMENSIONS
DIMENSIONS Chassis Semi-trailer
Chassis Static
Total weight (kg) 46000
Length (mm) 18516
Length (mm) 4780
Width (mm) 2550
Width (mm) 2730
Height (mm) 4100
Height (mm) 1970
Transport width (mm) 2550
DRIVE Transport height (mm) 3980
Engine type electric
Transport length (mm) 13550
Marke AC-motor
Motor power (kW / PS) 250, 315, 450 / 340, 428, 612
DRIVE
Engine type electrical
ROLLER Marke Three-phase motor
Number of rollers 1

Roller Diameter (mm) 1120
DISCHARGE CONVEYOR
Roller Speed (min-1) 1000 Advantages Width (mm) 1500
Length (mm) 7000
Powerful and robust V-belt drive with AC motor. The motor is
easily accessible from two sides
Height (mm) 4000
Advantages
FLAIL DRUM
Large feeding hopper with electrically driven scraper floor and
Width (mm) 1750 Shredding and grinding in one machine
infeed roller for controlled and problem-free feeding of the flail
Production of finished goods in one machine
drum Diameter (mm) 1100
Easy one-man operation
The flails grind the material, achieving a defined grain size by Speed (min-1) 1080 Contaminant-resistant high-speed shredding
means of the mesh size of the chosen grinding basket, the flail
Number of Flail teeth 36 Application of very strong magnets
tips retreat automatically in case of large unshreddable
contaminants in order to protect the machine and to reduce the ROLLER
tool wear Number of rollers 1
The quick-changing baskets, the patented flail tip fixings and Roller Length (mm) 3000
the good accessibility from outside permit a quick replacement
of the grinding tools
Very good separation of metal pieces from the material Roller Speed (min-1) 25/21
compounds thanks to the flail principle Number of roller teeth 21/42
KOMBI
KOMBI SHREDDER
SHREDDERLINE
LINE KOMBI SHREDDER LINE
SMART SHREDDING
SHREDDER-GRINDER DZ 750
Applications
The multi-purpose shredders of the DOPPSTADT DZ series process
waste wood, root wood and green waste. The combination of a
slow-going, contaminant-resistant pre-shredding system and a
downstream high-speed post-processing system makes for the
perfect solution for the most demanding shredding tasks.

DIMENSIONS
Chassis Semi-trailer
Length (mm) 18400
Width (mm) 2550
Height (mm) 4100
Transport height (mm) 3980
DRIVE
Engine type Volvo diesel engine
Marke Volvo TAD 1672 VE
Exhaust level EUROMOT IV / Tier IV final
Motor power (kW / PS) 515 / 700 Advantages
Fuel tank (l) 1070
Shredding and grinding in one machine
Torque (Nm) 3200
Production of finished goods in one machine
Easy and simple one-man operation via standard display
Marke Volvo TAD 1643 VE-B Contaminant-resistant high-speed shredding
Metal separation by two overband magnets (additional
Exhaust level EUROMOT II
magnetic roll optionally available)
Motor power (kW / PS) 565 / 768 Drive of all belts via a load-sensing pump
Torque (Nm) 3260
DISCHARGE CONVEYOR
Width (mm) 1500
Length (mm) 7000
Height (mm) 4000
FLAIL DRUM
Width (mm) 1750
Diameter (mm) 1100
Speed (min-1) 1080
ROLLER
Roller Speed (min-1) 25 - 31
Number of roller teeth 21 or 42
TROMMEL
TROMMELLINE
LINE
SMART SCREENING DRUM SCREEN 518 FLEX

TROMMEL LINE Applications
STAR SCREEN LINE
SPLITTER LINE
Like all Doppstadt SM machines the 518 FLEX happily accepts waste
and raw materials of all types for screening. It is equally suitable for
SMART SCREENING
FLATFLEX LINE
compost, earths, light construction waste, wood, biomass, sand, and
gravel.

DIMENSIONS
Chassis 1-axle yard chassis
Length (mm) 12300
Width (mm) 4485
Height (mm) 3300
DRIVE
Engine type diesel hydraulic

Marke CAT C 2.2 Powerpack
Exhaust level EUROMOT III A / TIER 4
Motor power (kW / PS) 36,3 / 49,4
Fuel tank (l) 150 Advantages
Torque (Nm) 140 Nm at 1800 rpm
Quick-change system for screen drum, its modular construction
DISCHARGE CONVEYOR
allows for the use of the reliable screen drums as applied in the
Width (mm) 1200
other SM 518 screen solutions.
Length (mm) 10000 (Total length incl. lower band) Large 4 m³ feed hopper, only 2.8 m loading height
Belt speed (m/s) 1,5 Exchangeable rear conveyor for right-, left- or longitudal-sided
material discharge
Height (mm) 2150
Center-based operational concept for easy handling: sparse
DISCHARGE CONVEYOR SIDE electrical and manual set-up options for speed of conveyor belt,
Width (mm) 800 conveyor base and screen drum
Length (mm) 4000 Comfortable, service-friendly access to machine components
Diesel or electrohydraulic drive option available
Belt speed (m/s) 1,2
The modular construction facilitates stationary operation using
Height (mm) 2015 support legs or with the 1-axle-based yard chassis an
unrestricted mobility, even under challenging surrounding
SCREEN DRUM
conditions.
Diameter (mm) 1800
No-limits flexibility: transport on flatbed truck or in in a
Length (mm) 4700 standard 40’’-High-Cube maritime container
Mesh size (mm) 3 - 130
Mesh type square, round or comb
Drum wall thickness (mm) 6 bis 10
Drum speed (min-1) 0-21
Screening area (m²) 22,5
TROMMEL
TROMMEL LINE
LINE TROMMEL
TROMMELLINE
LINE
DRUM SCREEN SM 518 PLUS DRUM SCREEN SM 620 PLUS

Like all Doppstadt SM machines the SM 518 Plus happily accepts Like all Doppstadt SM machines the SM 620 Plus happily accepts
waste and raw materials of all types for screening. It is equally waste and raw materials of all types for screening. It is equally
SMART SCREENING
suitable for compost, earths, light construction waste, wood, suitable for compost, earths, light construction waste, wood,
biomass, sand, and gravel. biomass, sand, and gravel.

Chassis 2-axle-trailer Chassis 2-axle-trailer
DRIVE DRIVE
Engine type diesel hydraulic Engine type diesel hydraulic
Make DEUTZ TCD 2.9 L4 Make DEUTZ TCD 3.6 L4

Exhaust level EUROMOT III B / Tier 4f Exhaust level EUROMOT IV / Tier 4 final
Motor power (kW / PS) 55 / 75 Motor power (kW / PS) 90 / 122 (@ 2000 rpm)
Advantages
Advantages
Torque (Nm) max. 300 Torque (Nm) max. 480 bei 1600 rpm
DISCHARGE CONVEYOR DISCHARGE CONVEYOR Fast changing system for the screening unit, operation with
trommel or 6 m3 star screen insert possible
Fast changing system for the screening unit, trommel or star Large 5 m3 feeding hopper with low feeding height of 2,9 m
Length (mm) 5500 screen insert available Length (mm) 5500
Load sensing control for optimized screening result
Belt speed (m/s) 1,1 Large 5 m3 feeding hopper with just 2,8 m loading height Belt speed (m/s) 1,6 Three additional hydraulic connections for operation of various
5,5 m long output conveyors with 3,5 m drop-off height optional equimpment
Height (mm) up to 3500 Height (mm) 3500
Electronic load sensing control for perfect screening at Economic fuel consumption, low operational costs, high
DISCHARGE CONVEYOR SIDE optimized throughput DISCHARGE CONVEYOR SIDE troughput capacity
Width (mm) 800 Compact transport dimensions for excellent mobility Width (mm) 1000
Belt speed (m/s) 2,3 Belt speed (m/s) 3,1
Height (mm) up to 3500 Height (mm) 3500
SCREEN DRUM SCREEN DRUM

Diameter (mm) 1800 Diameter (mm) 2000
Mesh size (mm) 8 - 100 Mesh size (mm) 8 bis 100
Mesh type square or round Mesh type square or round
Drum wall thickness (mm) 6 bis 10 Drum wall thickness (mm) 6 bis 10
Drum speed (min-1) 0-21 Drum speed (min-1) 0-20
Screening area (m2) 22,5 Screening area (m2) 30,2
PRODUCT BOOK 39
TROMMEL
TROMMEL LINE
LINE TROMMEL
TROMMELLINE
LINE
DRUM SCREEN SM 620 K PLUS DRUM SCREEN SM 620 SA PLUS

Like all Doppstadt SM machines the SM 620 K Plus happily accepts Like all Doppstadt SM machines the SM 620 SA Plus happily accepts
waste and raw materials of all types for screening. It is equally waste and raw materials of all types for screening. It is equally
SMART SCREENING
suitable for compost, earths, light construction waste, wood, suitable for compost, earths, light construction waste, wood,
biomass, sand, and gravel. biomass, sand, and gravel.

Chassis Steel-tracks Chassis Semi-trailer
DRIVE DRIVE
Engine type diesel-hydraulic Engine type diesel-hydraulic
Make DEUTZ TCD 3.6 L4

Make Deutz TCD 3.6 L4 Advantages
Exhaust level EUROMOT IV / Tier 4 final Exhaust level EUROMOT IV / Tier 4 final
Quick exchange of screening unit, operates with trommel or
Motor power (kW / PS) 90 / 122 (@ 2000 rpm) Motor power (kW / PS) 90 / 122 (@ 2000 rpm)
star screen insert
Fuel tank (l) 400
Advantages Fuel tank (l) 400 Large 7 m3 feeding hopper with low feeding height of 2,9 m
Electronic load sensing control for optimized screening results
Torque (Nm) max. 480 bei 1600 rpm Torque (Nm) max. 480 bei 1600 rpm
Three additional hydraulic connections for simultaneous
DISCHARGE CONVEYOR Heavy-duty tracklaying chassis, self-propelled via remote DISCHARGE CONVEYOR
control unit operation of additional equipment
Large feeding hopper capacity with over 7 m3 (9 yd3) volume, Low operational costs and high throughput capacity
Length (mm) 5500 Length (mm) 5,5 m
Loading height 2,9 m (9,5 ft) only
Belt speed (m/s) 1,6 Load-sensing system: among others, allows simultaneous Belt speed (m/s) 1,6
Height (mm) 3300 driving and working Height (mm) up to 3500
Track chassis with lifting kinematic for optimum machine
DISCHARGE CONVEYOR SIDE leveling on uneven ground DISCHARGE CONVEYOR SIDE
Width (mm) 1000 Fast changing system for trommel or star screen insert Width (mm) 1000
Length (mm) 5250 Diesel engine with low fuel consumption - exhaust standard Tier Length (mm) 5500
Belt speed (m/s) 3,1 4 final, low operation costs, highest throughput capacity Belt speed (m/s) 3,1
Extensive health and safety kit, complete machine control
Height (mm) 3250 Height (mm) up to 3500
placed in the rear
SCREEN DRUM Additional hydraulic connections to operate numerous optional SCREEN DRUM
Diameter (mm) 2000 equimpment Diameter (mm) 2000
Mesh size (mm) 8 bis 100 Mesh size (mm) 8 bis 100
Drum wall thickness (mm) 6 bis 10 Drum wall thickness (mm) 6 bis 10
Drum speed (min-1) 0-20 Drum speed (min-1) 0 - 20
Screening area (m2) 30,2 Screening area (m2) 30,2
PRODUCT BOOK 41
TROMMEL
TROMMEL LINE
LINE TROMMEL
TROMMELLINE
LINE
DRUM SCREEN SM 720 SA PLUS DRUM SCREEN SST 518
Like all Doppstadt SM machines the SM 720 SA Plus happily accepts The screening solutions of the Doppstadt SM series screen waste
waste and raw materials of all types for screening. It is equally and raw materials such as compost, soil, construction waste,
SMART SCREENING
suitable for compost, earths, light construction waste, wood, domestic waste, industrial waste, plastic, glass, paper, wood,
biomass, sand, and gravel. biomass, sand, gravel, scrap or slag. The screens are perfectly suited
for combined applications e. g. together with Doppstadt shredders
or windsifters.

Chassis Semi-trailer Chassis Static

Transport width (mm) 2550 DRIVE
Transport height (mm) 4000 Engine type Electrical
Advantages Marke Three-Phase Motor
DRIVE Motor power (kW / PS) 11 / 15

Engine type diesel engine Maximum throughput capacity at high- quality screening results SCREEN DRUM
Make Deutz TCD 3.6 L4 due to extra large screening area Diameter (mm) 1800
Unique load sensing feeder control makes sure that the
Exhaust level EUROMOT IV / Tier 4 final Length (mm) 4700
capacity of the machine is used at the optimum in safe
Motor power (kW / PS) 90 / 122 (@ 2000 rpm) Mesh size (mm) user-specific
operation without interruption.
Fuel tank (l) 400 Large size feeding hopper and extra long output conveyors Mesh type squared, round
Torque (Nm) max. 480 bei 1600 rpm allow feeding of the machine with large front loaders. Screening area (m²) 22,5
Advantages
Low operation costs due to powerful drive at low fuel
DISCHARGE CONVEYOR consumption.
Width (mm) 1000 No limitation for road transport, short set-up time.
Length (mm) 5500 Very robust frame construction based on thick-walled profile
tubes
Belt speed (m/s) 1,6
Speed-controlled direct drive with standard gear motor,
Height (mm) 3500 therefore perfectly adjustable to screening process and quality
DISCHARGE CONVEYOR SIDE requirements
Width (mm) 1000 High screening throughput thanks to guided material
processing inside the drum
Length (mm) 5500
Wide range of possible applications thanks to combinable lower
Belt speed (m/s) 3,1 belts and the option of various mesh sizes
Height (mm) 3500 Encased machine housing for zero-emission operation in
connection with attachable exhaust device
SCREEN DRUM
Diameter (mm) 2000
Length (mm) 7100
Mesh size (mm) 8 bis 100
Mesh type square or round
Drum wall thickness (mm) 6 bis 10
Drum speed (min-1) 0-20
Screening area (m2) 38,8
TROMMEL
TROMMEL LINE
LINE TROMMEL
TROMMELLINE
LINE
DRUM SCREEN SST 720 DRUM SCREEN SST 725
The screening solutions of the Doppstadt SM series screen waste The screening solutions of the Doppstadt SM series screen waste
and raw materials such as compost, soil, construction waste, and raw materials such as compost, soil, construction waste,
SMART SCREENING
domestic waste, industrial waste, plastic, glass, paper, wood, domestic waste, industrial waste, plastic, glass, paper, wood,
biomass, sand, gravel, scrap or slag. The screens are perfectly suited biomass, sand, gravel, scrap or slag. The screens are perfectly suited
for combined applications e. g. together with Doppstadt shredders for combined applications e. g. together with Doppstadt shredders
or windsifters. or windsifters.

Total weight (kg) 13000 Total weight (kg) approx. 16000
DRIVE DRIVE
Engine type Electrical Engine type Electrical
Make Three-Phase Motor Marke Spur Gear Motor
Motor power (kW / PS) 22 / 30 Motor power (kW / PS) 2 x 15 / 2 x 20
SCREEN DRUM Torque (Nm) 2690

Diameter (mm) 2000 SCREEN DRUM
Length (mm) 7000 Diameter (mm) 2500

Advantages
Mesh size (mm) user-specific Length (mm) 7000
Mesh type squared, round Mesh size (mm) user-specific
Advantages
Screening area (m2) approx. 25 Mesh type squared, round
Easy accessibility thanks to large protection doors
Very robust frame construction based on thick-walled profile Screening area (m²) 47,9
tubes
Very robust frame construction based on profile tubes
therefore perfectly adjustable to screening process and quality
requirements
therefore perfectly adjustable to screening process and quality
High screening throughput thanks to guided material
requirements
High screening throughput thanks to guided material
Horizontal machine installation, enables space-saving set-up in
plant projects
plant projects
TROMMEL
TROMMEL LINE
LINE TROMMEL
TROMMELLINE
LINE
DRUM SCREEN SST 1025 DRUM SCREEN SST 1525

SMART SCREENING

DRIVE DRIVE
Make Spur Gear Motor Make Spur Gear Motor
Motor power (kW / PS) 4 x 11 / 4 x 15 Motor power (kW / PS) 4 x 15 / 4 x 20


Length (mm) 10000 Length (mm) 2 x 7500
Mesh size (mm) user-specific Mesh size (mm) user-specific
Mesh type squared, round

Advantages Mesh type squared, round
Advantages
Screening area (m2) 63,8 Screening area (m2) 87
Very robust frame construction based on profile tubes
Speed-controlled direct drive with standard gear motor, Easy accessibility thanks to large protection doors
therefore perfectly adjustable to screening process and quality Very robust frame construction based on profile tubes
requirements Speed-controlled direct drive with standard gear motor,
High screening throughput thanks to guided material therefore perfectly adjustable to screening process and quality
processing inside the drum requirements
Horizontal machine installation, enables space-saving set-up in High screening throughput thanks to guided material
plant projects processing inside the drum
plant projects
PRODUCT BOOK 47
TROMMEL
TROMMELLINE
LINE TROMMEL
TROMMELLINE
LINE
DRUM SCREEN SM 518 A DRUM SCREEN SM 518 F
SMART SCREENING

DRIVE DRIVE
Engine type Elecrical Engine type Electrical
Marke Spur Gear Motor Marke Spur Gear Motor

Mesh size (mm) user-specific Mesh size (mm) user-specific
Mesh type squared, round Mesh type squared, round

Screening area (m²) 22,5 Screening area (m²) 22,5
Advantages Advantages
Easy accessibility thanks to open construction Buit-on bunker with capacity of 4.5 m3
Very robust frame construction based on profile tubes High screening throughput thanks to guided material
Speed-controlled direct drive with standard gear motor, processing inside the drum
therefore perfectly adjustable to screening process and quality Horizontal machine installation, enables space-saving set-up in
requirements plant projects
High screening throughput thanks to guided material Smooth and quiet operation of the drum using Vulkollan®
processing inside the drum coated castors
Screening drums of the mobile SM series are seamlessly Easy machine operation via manual control and/or integration
applicable into higher level master control system
TROMMEL
TROMMELLINE
LINE STAR
STAR SCREEN
SCREENLINE
LINE
DRUM SCREEN SM 620 A STAR SCREEN DST 512

The screening solutions of the Doppstadt SM series screen waste The DST star screens are adapted to suit the task of screening green
and raw materials such as compost, soil, construction waste, waste and compost.
SMART SCREENING
domestic waste, industrial waste, plastic, glass, paper, wood,
biomass, sand, gravel, scrap or slag. The screens are perfectly suited
for combined applications e. g. together with Doppstadt shredders
or windsifters.

DRIVE DRIVE
Marke Bevel Gear Motor Make Spur Gear Motor
Motor power (kW / PS) 15 / 20 Motor power (kW / PS) 2 x 7,5 /
SCREEN DRUM
Diameter (mm) 2000

Length (mm) 5440
Mesh size (mm) user-specific
Mesh type squared, round

Advantages
Advantages
Screening area (m²) ca. 30,1
Easy accessibility thanks to open construction

Very robust frame construction based on profile tubes Elliptically shaped stars for better screening quality and easy
Speed-controlled direct drive with standard gear motor, transport
therefore perfectly adjustable to screening process and quality Various, alternating shaft speeds
requirements Low-wear metal-tipped, elastic star fingers
High screening throughput thanks to guided material Screening bed operating at various speeds
Screening drums of the mobile SM series are seamlessly
applicable
STAR
STAR SCREEN
SCREENLINE
LINE SPLITTER
SPLITTERLINE
LINE
STAR SCREEN DST 712 SPLITTER UNIT 325

The DST star screens are adapted to suit the task of screening green Like all machines belonging to this DOPPSTADT series the
waste and compost. stationary SPLITTER UNIT can easily cope with a variety of
SMART SCREENING
materials. It is perfectly suited for commercial and industrial waste,
wood, and green waste. For special applications the machine can be
adapted to process scrap metal and slag as well.


Engine type Electrical Transport height (mm) 1500
Make Spur Gear Motor Transport length (mm) 6300
Motor power (kW / PS) 3 x 7,5 / DRIVE

Make Gearmotors
Motor power (kW / PS) 9,5 / 12,9
Advantages LOWER SCREENING DECK

Length (mm) 3000

Width (mm) 2500

Advantages
Elliptically shaped stars for better screening quality and easy
transport
Various, alternating shaft speeds
Low-wear metal-tipped, elastic star fingers Separation of less readily screenable material, including
Screening bed operating at various speeds adjustment of screen gap
Almost clog-free operation thanks to self-cleaning process
Low maintenance costs due to robust, simple set-up
Quick and easy exchange of screening deck modules serving a
varietly of applications
Screening deck available in different lengths: 3,000, 4,000 and
6,000 mm
PRODUCT BOOK 53
SPLITTER
SPLITTERLINE
LINE SPLITTER
SPLITTERLINE
LINE
SPLITTER UNIT 425 SPLITTER UNIT 625

Like all machines belonging to this DOPPSTADT series the Like all machines belonging to this DOPPSTADT series the
stationary SPLITTER UNIT can easily cope with a variety of stationary SPLITTER UNIT can easily cope with a variety of
SMART SCREENING
materials. It is perfectly suited for commercial and industrial waste, materials. It is perfectly suited for commercial and industrial waste,
wood, and green waste. For special applications the machine can be wood, and green waste. For special applications the machine can be
adapted to process scrap metal and slag as well. adapted to process scrap metal and slag as well.

DRIVE DRIVE

Make Gearmotors Make Gearmotors

LOWER SCREENING DECK

16,5 / 22,4 Motor power (kW / PS)

22 / 29,9
Advantages
Length (mm) 4000
Advantages Length (mm) 6000
Separation of less readily screenable material, including
Width (mm) 2500 Width (mm) 2500 adjustment of screen gap
Separation of less readily screenable material, including Almost clog-free operation thanks to self-cleaning process
adjustment of screen gap Low maintenance costs due to robust, simple set-up
Almost clog-free operation thanks to self-cleaning process Quick and easy exchange of screening deck modules serving a
Low maintenance costs due to robust, simple set-up varietly of applications
Quick and easy exchange of screening deck modules serving a Screening deck available in different lengths: 3,000, 4,000 and
varietly of applications 6,000 mm
Screening deck available in different lengths: 3,000, 4,000 and
6,000 mm
PRODUCT BOOK 55
FLATFLEX
FLATFLEXLINE
LINE FLATFLEX
FLATFLEXLINE
LINE
STAR SCREEN HS 401 SELECTOR SPIRAL SHAFT SEPARATOR SELECTOR 400
Combined with the pre-shredder DW 3060 Type F the HS 401 The spiral shaft technology (SWS) provides the perfect separation
Selector is a safe bet for the screening of many types of wooden method for input materials which are particularly difficult to screen.
SMART SCREENING
biomass waste and raw material. It is equally suitable for pre- It effectively reduces the amount of contaminants during the first
shredded biomass out of wood waste, green waste, stumps and separation stage and can be used for the processing of commercial
roots. waste, mixed construction waste, domestic/biowaste, old growth
timber, compost (coarse separation), etc.

DIMENSIONS
DIMENSIONS Chassis Hook-lift
Chassis Hook-lift Total weight (kg) ca. 7000
Total weight (kg) approx. 6500 Length (mm) ca. 8700
Length (mm) approx. 8700 Width (mm) ca. 2750
Width (mm) approx. 6700 Height (mm) ca. 4500
Height (mm) approx. 4900 Transport width (mm) 2550
Transport width (mm) 2550 Transport height (mm) 2550
Transport height (mm) 2900 Transport length (mm) 6700
DRIVE
DRIVE Engine type hydraulic
Engine type hydraulic connetion 70 l/min from DW Marke Powered by additional hydraulic
Make hydraulic connection of a pre-shredder (min. 70

UPPER SCREENING DECK l/min. at 250 bar) or optionally via
Width (mm) 1300 separate hydraulic power unit
Length (mm) 3500
Simple, robust construction, no electrics, powered by pre-

Length (mm) 4000
Advantages
Width (mm) 2000
shredder via additional hydraulic connection 70 l/min
Trouble-free processing of barely screenable material streams
Integrated conveyor returns oversize material to pre-shredder
prone to intertwining and wear-inducing
Defined fine fraction, variable mesh size by way of rpm
Application of the additional hydraulical connection included in
adjustment or quick change of screening deck
the Doppstadt products/suitable third-party systems (min. 70
Compact tranport dimensions, short set-up time for transport
l/min. at 250 bar) or a separate hydraulic power unit
and operational readiness
Hook lift mobile construction, compact transport dimensions,
Low operational costs, minimum production costs per ton of
requires little set-up time
final product
Basic, robust construction, no electronical systems included,
low-wear technology for maximum process reliability
Low energy consumption and minimum operating costs
Also applicable for very inhomogeneous material mixes without
pre-shredding. Requires the controlled material intake via
acceleration conveyor though.
Active, clogging-free screen gaps, ensure constantly high
screening quality
FLATFLEX
FLATFLEXLINE
LINE FLATFLEX LINE
SPIRAL SHAFT SEPARATOR SELECTOR 800
Applications
The spiral shaft technology (SWS) provides the perfect separation
method for input materials which are particularly difficult to screen.
SMART SCREENING
It effectively reduces the amount of contaminants during the first
separation stage and can be used for the processing of commercial
waste, mixed construction waste, domestic/biowaste, old growth
timber, compost (coarse separation), etc.

DIMENSIONS
Chassis Hook-lift
Total weight (kg) ca. 10000
Length (mm) ca. 16000
Width (mm) ca. 2750
Height (mm) ca. 4500
DRIVE
Engine type hydraulic
Marke Powered by additional hydraulic

connection of a pre-shredder (min. 70
l/min. at 250 bar) or optionally via
separate hydraulic power unit
LOWER SCREENING DECK Advantages

Length (mm) 4000
Processing of material streams which are difficult to separate,
Width (mm) 2000
bogging-prone and likely to cause premature wear and tear on
separation equipment
Flexible set-up of spiral shaft decks and/or star screen decks on
the basic chassis. Other superstructural parts may be added at
will (available also for the preceeding model HS 800 via retrofit
kit)
Application of the additional hydraulical connection included in
the Doppstadt products/suitable third-party systems (min. 70
l/min. at 250 bar) or a separate hydraulic power unit
Many areas of application. By exchanging the spiral shaft decks
(SWS) and star screen decks (DST) split cuts may be
individually adjusted, singles decks can be compatibly
exchanged between the Selector models 400 and 800
Integrated recirculation line for automatic recirculation of
oversized particles into the shredding process
Hook lift mobile construction, compact transport dimensions,
requires little set-up time
Basic, robust construction, no electronical systems included,
low-wear technology for maximum process reliability
Low energy consumption and minimum operating costs
CHIPPER
CHIPPER LINE
LINE
SMART CHIPPING
CHIPPER DH 811
CHIPPER LINE Applications
The precision chippers of the DH 811 series process wood slabs, log
and industrial wood to diferent sizes of wood chips. The machines
can handle trunk diameters up to 800 mm temporary.

DIMENSIONS
Chassis 2-axle-trailer
Length (mm) 8249
SMART CHIPPING
Width (mm) 2500
Height (mm) 6099
DRIVE
Engine type diesel engine
Marke MTU 6R1300
Exhaust level EUROMOT IV / Tier 4 final
Fuel tank (l) 750

Torque (Nm) 2460 Nm at 1300 rpm

Advantages
Engine type 2 Mercedes Benz OM 460 LA
Exhaust level EUROMOT IIIA Variable infeed speed
Closed, robust chipping drum
High rotor weight for constant rotation speed and evenly-
LOWER SCREENING DECK shaped wood chips
Knifes 5 Thrower driven directly by the rotor for efficit chipping and
Logdiameter Hardwood 480 long distance throwing
Chipping knifes with overload protection
(mm)
Changeable screens for various sizes of wood chips
Logdiameter Softwood 600 Easy setup and maintenance
(mm)
Infeed height (mm) 800
Infeed width (mm) 1100
Rotor Diameter (mm) 1000
Rotor Width (mm) 1080
CHIPPER
CHIPPER LINE
LINE CHIPPER
CHIPPER LINE
LINE
CHIPPER DH 811 K CHIPPER DH 811 L

The precision chippers of the DH 811 series process wood slabs, log The precision chippers of the DH 811 series process wood slabs, log
and industrial wood to different sizes of wood chips. The machines and industrial wood to different sizes of wood chips. The machines
can handle trunk diameters up to 800 mm temporary. can handle trunk diameters up to 800 mm temporary.

Chassis Steel-tracks Chassis Truck mounted
Total weight (kg) 23000 Total weight (kg) 15700 (mounted chipper without diesel)
SMART CHIPPING
Height (mm) 5230 Height (mm) ca. 6200
Transport height (mm) 3300 Transport height (mm) 2683 plus truck chassis
DRIVE DRIVE
Engine type diesel engine Engine type diesel engine

Marke MTU 6R1300 Marke MTU 6R1300

Exhaust level EUROMOT IV / Tier 4 final Exhaust level EUROMOT IV / Tier 4 final
Fuel tank (l) 750 Advantages Fuel tank (l) 750
Torque (Nm) 2460 Nm at 1300 rpm Torque (Nm) 2460 Nm at 1.300 rpm Advantages
Robust track-mounted chassis, decoupled from upper carriage

by way of vibration dampers; minimization of vibration Variable infeed speed
Engine type 2 MTU 6R1300 Variable infeed speed Engine type 2 Mercedes Benz OM 460 LA
Closed, robust chipping drum
Exhaust level EUROMOT IIIA high rotor weight of the closed, robust chipping drum for Exhaust level EUROMOT IIIA High rotor weight for constant rotation speed and evenly-
constant rotation speed and evenly-shaped wood chips shaped wood chips
Thrower driven directly by the rotor for efficit chipping and Thrower driven directly by the rotor for efficient chipping and
Fuel tank (l) 750 long distance throwing LOWER SCREENING DECK long distance throwing
LOWER SCREENING DECK Chipping knifes with overload protection Knifes 5 Chipping knifes with overload protection
Knifes 5 Changeable screens for various sizes of wood chips Logdiameter Hardwood 480 Changeable screens for various sizes of wood chips
Compact dimensions for easy transport on flatbed truck, high Easy setup and maintenance
Logdiameter Hardwood 480 (mm)
mobility and structural stability in barely passable surroundings Suitable for various 4-axle truck configurations
(mm) Logdiameter Softwood 600
Logdiameter Softwood 600 (mm)
(mm) Infeed height (mm) 800
Infeed height (mm) 800 Infeed width (mm) 1100
Infeed width (mm) 1100 Rotor Diameter (mm) 1000
Rotor Diameter (mm) 1000 Rotor Width (mm) 1080
CHIPPER
CHIPPER LINE
LINE CHIPPER
CHIPPER LINE
LINE
CHIPPER DH 812 CHIPPER DH 812 LD
The precision chippers of the DH series 812 process waste wood, The precision chippers of the DH series 812 process waste wood,
wood slabs, log and industrial wood timber to diferent sizes of wood slabs, log and industrial wood timber to diferent sizes of
wood chips. The machines can handle trunk diameters up to 800 wood chips. The machines can handle trunk diameters up to 800
mm temporary. mm temporary.

Chassis 2-axle-trailer Chassis Truck mounted
Total weight (kg) 19000 Total weight (kg) 25500 - 27500
SMART CHIPPING
Width (mm) 5039 Transport width (mm) 2550
Height (mm) 5834 Transport height (mm) 4000
Transport width (mm) 2539 Transport length (mm) 84100
Transport height (mm) 3929 depending on crane DRIVE
Transport length (mm) 6414 Engine type Direct diesel drive
DRIVE Marke Mecedes Arocs 3648

Engine type Drive by PTO shaft of tractor 1 3/4' Exhaust level Euro 6
Z=20 Motor power (kW / PS) 350 / 480
Motor power (kW / PS) 250-370 / 340-500
LOWER SCREENING DECK Advantages Engine type 2 Direct diesel drive Advantages
Knifes 6 Marke Mecedes Arocs 3651
Logdiameter Hardwood 480 Exhaust level Euro 6 Extreme engine friendly drive concept
Variable infeed speed
(mm) Closed, robust chipping drum produces evenly shaped wood Motor power (kW / PS) 375 / 510
Closed, robust chipping drum produces evenly shaped wood
chips
Logdiameter Softwood 600
High rotor weight of more than 3 t for constant rotation speed LOWER SCREENING DECK chips - High rotor weight of more than 3 t for constant rotation
(mm) Knifes 6 speed and evenly-shaped wood chips
Thrower driven directly by the rotor for efficit chipping and
Thrower driven directly by the rotor for efficient chipping and
Infeed height (mm) 950 long distance throwing Logdiameter Hardwood 480
long distance throwing
Infeed width (mm) 1200 Hydraulic blocking of the axle ensures stability against collapse (mm) With option telescopic thrower the machine can easily load
Variable blade advance and easily changeable screens for high
Rotor Diameter (mm) 1000 Logdiameter Softwood 600 trucks which stands in front of the chipper in direction of travel
quality wood chips in sizes from P16 to P100 (G30 - G100),
Rotor Width (mm) 1200 (mm) Variable blade advance and easily changeable baskets for high
Protected counterknife
quality wood chips in sizes from P16 to P100 (G30 - G100),
Loading height (mm) 1408 Optional: wide tires for heavy terrain Infeed height (mm) 950
Protected counterknife
Easy setup and maintenance
Loading width (mm) 2016 Infeed width (mm) 1200 Hydraulic blocking of the axle ensures stability against collapse
Rotor Diameter (mm) 1000 Easy setup and maintenance

DRUMCHIPPER
CHIPPER LINE LINE CHIPPER
CHIPPER LINE
LINE
CHIPPER DH 910 SA CHIPPER DH 910 SA E
wood slabs, log and preshredded root timber to different sizes of wood slabs, log and industrial wood as well as preshredded and
wood chips. The machines can handle trunk diameters up to 900 stoned root timber to different sizes of wood chips. The machines
mm temporary. can handle trunk diameters up to 900 mm temporary.

Chassis Semi-trailer Chassis Semi-trailer
SMART CHIPPING
DRIVE DRIVE
Engine type diesel engine Engine type electrical drive

Make Volvo TAD 1643 VE-B Marke AC motor
Exhaust level EUROMOT II Motor power (kW / PS) 450 / 612

Fuel tank (l)
565 / 768
900
Knifes 5
Torque (Nm) 3260 Nm at 1260 rpm Solid construction for continuous, industrial-scale operation Logdiameter Hardwood 680
Closed, robust chipping drum - high rotor weight of more than
(mm) Advantages
Engine type 2 Volvo TAD 1672 VE Logdiameter Softwood 900
3.5 t for constant rotation speed and evenly-shaped wood chips Solid construction for industrial-scale continuous operation
Exhaust level EUROMOT IV / Tier 4 final (mm)
Custom-built rotor with 45 mm blade advance for economical Variable infeed speed
Motor power (kW / PS) 515 / 700 production of very large wood chips (P100 / G100) Infeed height (mm) 900
Closed, robust chipping drum - high rotor weight of more than
Fuel tank (l) 900 Thrower driven directly by the rotor for efficient chipping and Infeed width (mm) 1000 3.5 t for constant rotation speed and evenly-shaped wood chips
long distance throwing Custom-built rotor with 45 mm blade advance for economical
Torque (Nm) 3200 Nm at 1260 rpm Rotor Diameter (mm) 1300
Chipping knifes with overload protection production of very large wood chips (P100 / G100)
LOWER SCREENING DECK Changeable screens for various sizes of wood chips Rotor Width (mm) 1060
Thrower driven directly by the rotor for efficient chipping and
Knifes 5 Easy setup and maintenance Loading height (mm) 2092
long distance throwing
Logdiameter Hardwood 680 Chipping knifes with overload protection
(mm) Changeable screens for various sizes of wood chips
(mm)
DRUMCHIPPER
CHIPPER LINE LINE DRUMCHIPPER
CHIPPER LINE LINE
CHIPPER DH 910 SA-B CHIPPER DH 910 SA-B E

wood slabs, log and preshredded root timber to different sizes of wood slabs, log and preshredded root timber to different sizes of
wood chips. The machines can handle trunk diameters up to 900 wood chips. The machines can handle trunk diameters up to 900
mm temporary. mm temporary.

Chassis Semi-trailer Chassis Semi-trailer
Length (mm) ca. 20000 Length (mm) ca. 20000
SMART CHIPPING
DRIVE DRIVE
Engine type diesel engine Engine type electrical drive
Make Volvo TAD 1643 VE-B Make AC motor

Exhaust level EUROMOT II Motor power (kW / PS) 450 / 612
Motor power (kW / PS) 565 / 768 LOWER SCREENING DECK
Fuel tank (l) 900
Advantages Knifes 5
Advantages
Torque (Nm) 3260 Nm at 1260 rpm Logdiameter Hardwood 700
Solid construction for continuous, industrial-scale operation (mm) Solid construction for continuous, industrial-scale operation
Engine type 2 Volvo TAD 1672 VE Variable infeed speed Logdiameter Softwood 900 Variable infeed speed
Closed, robust chipping drum - high rotor weight of more than Closed, robust chipping drum - high rotor weight of more than
Exhaust level EUROMOT IV / Tier 4 final (mm)
3.5 t for constant rotation speed and evenly-shaped wood chips 3.5 t for constant rotation speed and evenly-shaped wood chips
Motor power (kW / PS) 515 / 700 Changeable screens for various sizes of wood chips Infeed height (mm) 900 Changeable screens for various sizes of wood chips
Fuel tank (l) 900 Custom-built rotor with 45 mm blade advance for economical Infeed width (mm) 1000 Custom-built rotor with 45 mm blade advance for economical
production of very large wood chips (P100 / G100) production of very large wood chips (P100 / G100)
Torque (Nm) 3200 Nm at 1260 rpm Rotor Diameter (mm) 1300
Chipping knifes with overload protection Chipping knifes with overload protection
LOWER SCREENING DECK Gentle, conveyor-based discharge for top-quality wood chips - Rotor Width (mm) 1000 Gentle, conveyor-based discharge for top-quality wood chips -
Knifes 5 90° Swiveling rear conveyor enables set-up of large pits behind 90° Swiveling rear conveyor enables set-up of large pits behind
Logdiameter Hardwood 700 the machine the machine
Easy setup and maintenance Easy setup and maintenance
(mm)
(mm)
PRODUCT BOOK 69
DRUMCHIPPER
CHIPPER LINE LINE CHIPPER LINE
CHIPPER DH 910 E
Applications
The precision chippers of the DH series 910 process waste wood,
wood slabs, log and preshredded root timber to different sizes of
wood chips. The machines can handle trunk diameters up to 900
mm temporary.

DIMENSIONS
Chassis Static
Length (mm) 12700
SMART CHIPPING
Width (mm) 2500
Height (mm) 3400
DRIVE
Engine type electrical drive
Make AC-motor
Motor power (kW / PS) 450 /

Knifes 5
Logdiameter Hardwood
(mm)
680
Advantages
Logdiameter Softwood 900 Solid construction for industrial-scale operation
(mm) Efficient continnous use by elektic drive
Infeed height (mm) 900 Closed, robust chipping drum produces evenly shaped wood
chips
High rotor weight of more than 3.5 t for constant rotation speed
Rotor Diameter (mm) 1300 and evenly-shaped wood chips
Rotor Width (mm) 1000 Custom-built rotor with 45 mm blade advance for economical
production of very large wood chips
Chipping knifes with overload protection
PRODUCT BOOK 71
SIDE
SIDE TURNER
TURNERLINE
LINE
SMART TURNING WINDROW TURNER DU 265

SIDE TURNER LINE Applications
WINDROW TURNER LINE
The windrow turner DU 265 can be used for effective turning and
processing compost windrows, contaminated soil or windrows of
shredded green waste or waste residues and biowaste.

DIMENSIONS
Chassis Mounted unit
Length (mm) 2867
Width (mm) 5106
Height (mm) 2682
DRIVE
Engine type PTO-Drive
Marke 110 to 130 KW
SMART TURNING
MIXINGSHAFTS
Maximum Windrow height (mm) 3200
Advantages
Ventilation of materials
High degree of windrow homogenization
Low acquisition costs, machine works with any standard tractor
Laterally shifted windrow structure to avoid blending of
different states of decomposition
SIDE
SIDE TURNER
TURNERLINE
LINE WINDROWTURNER
WINDROW TURNERLINE
LINE
WINDROW TURNER DU 320 NEW: WINDROW TURNER SERIES SCARAB

Applications Belt driven or hydraulic driven drum
The windrow turner DU 320 can be used for effective turning and
Choice of Cat or Scania engines
processing compost windrows, contaminated soil or windrows of
shredded green waste or waste residues and biowaste.
Open access design for easy maintenance
Independent suspension
Rubber covered tunnel or stainless steel
Choice of auger style or

aggressive ﬂailed drum
DIMENSIONS
Chassis Mounted Unit (3 Point Cat. 3)
Track drive
Length (mm) 3100
Width (mm) 5200 SCARAB MODELS
Height (mm)
Transport width (mm)
3281
3070
SCARAB
SCARAB
125
167
Please contact us for The SCARAB Difference
more information!
Transport height (mm) 3680 SCARAB 188 • Belt driven drums provide unmatched productivity and
Transport length (mm) 2703 SCARAB 208 fuel efficiency. SCARAB is the industry leader for both
hydraulic and belt driven drums. Belt driven drums deli-
DRIVE ver about 50% more of the available horsepower to the
Engine type PTO-Drive drum than hydraulic models. This translates into lower
fuel consumption and less time in the windrow means
Make max. 228 kW
lower labor costs. For larger composters these savings
SMART TURNING
Motor power (kW / PS) 228 / 310 can exceed the cost of the turner in less than 10 years.

MIXINGSHAFTS • Oversized components: SCARAB’s reputation for
Maximum Windrow height (mm)3300 reliability and longevity can be traced to one thing.....
Advantages
oversized components. If you want to be certain about
your choice of turners simply compare the size of our
radiators, engines, drive systems, suspensions, hydraulic
High degree of windrow homogenization systems, and final drive motors to any other model..…
then decide.
Accelerated rotting process
Suitable for standard tractors equipped with forward-reverse
• Local parts and service: our dealer network means
unit
you won’t be waiting weeks for a repair and one day
Perfectly suited for trapezoid- and shift-shaped windrows
shipment is available on most parts. Many parts are
Applicable for earths and paper-based materials available through local merchants.
• Design flexibility reduces your total operating costs:

our largest model can significantly reduce your cover
and pad cost, our pad-saver option maximizes the
material on your pad, and our D5 tracks insure traction
in the most challenging conditions.
• With more design options than any other manufacturer

and over 40 years of experience built into every
machine, SCARAB continuously tests ways to improve
machine performance and support evolving needs of
composters.
MADE IN THE USA
PRODUCT BOOK 75
WATERSIFTER
WATERSIFTERLINE
LINE
SMART SIFTING DENSITY SEPARATION HDS-S

WATERSIFTER LINE Applications
WINDSIFTER LINE
The HDS-S has already proven itself in mixed construction waste
and compost screen oversize. In principle, however, it can separate
all mixtures at a density cut of 1 g/cm³ or above it. The special
feature is the degree of variability. This way even heavy or water-
saturated wood can be separated from stones.

DIMENSIONS
Chassis Static
Length (mm) 5466
Width (mm) 3878
Height (mm) 2421
DRIVE
Motor power (kW / PS) 13 / 17.7
Advantages
adjustable density separation with variable separating cut
quick amortization
simple, maintenance-friendly, continuous separation process
high selectivity
plug and play
high throughput in reference to the foot print
SMART SIFTING
WATERSIFTER
WATERSIFTERLINE
LINE WIND SIFTINGLINE
WINDSIFTER LINE
DENSITY SEPARATION HDS-M WIND SIFTING WS 1001

The HDS-M is the medium-sized version of the hydro density The static windsifter can becombined with all of the Doppstadt
separation of Doppstadt. He combines 3 process steps in one screening systems thusforming a powerful state-of-the-art
machine, which are density separation, washing of light material and processing unit.Construction debris, C & D waste, industrial waste,
water treatment. The machine is used for compost screen oversize, bio waste, RDF ,waste wood and compost are suitable input
root wood, green cuttings and wood stone mixtures such as mixed materials for the machinecombination.Easiest operations of
construction waste. adjustments enables the change of processing material within few
minutes.

DIMENSIONS
DIMENSIONS Chassis Static
Chassis Hook-lift Total weight (kg) 5000 / 5400 / 5800
Total weight (kg) 7500 Length (mm) 6877 / 8362 / 9847
Length (mm) 14555 Width (mm) 2005
Width (mm) 2322 Height (mm) 2300
Height (mm) 3510 Transport width (mm) 1950
DRIVE Transport height (mm) 2300

Engine type Elektrisch Transport length (mm) 6877 / 8362 / 9847
Motor power (kW / PS) 32 / 43,5 DRIVE

WASHING DRUM Engine type Electric Standard
Diameter (mm) 1400 Make SEW / NORD
Length (mm)
Mesh size (mm)
4000
6
SLS
30 / 41
Advantages
Power (kW) 18,5 Modular working chamber allows for individual lay out design
Air discharge volume 12.000 geared to spefic areas of application
Aerodynamically optimized blast-pipe system
SEPARATION DRUM
Advantages Drive Drehstrommotor
Infeed belt with downward buckling prevents larger scraps
from mingling with lighweight fraction
Drive power 1,5 kW Standardized scaling of all set-up parameters for perfect
adjustable density separation with variable separation cut repeatability of separation results
BLOWER UNIT
integrated water treatment and recirculation • High conveying speed ensures maximum throughput while
Power (kW) 22 kW
SMART SIFTING
washing of the light fraction delivering top-quality separation results
low operating costs Construction type Radialventilator
plug and play
robust
WIND SIFTINGLINE
WINDSIFTER LINE WIND SIFTINGLINE
WINDSIFTER LINE
WIND SIFTING WS 1501 WIND SIFTING WS 2001

The static windsifters of the WS model range can becombined with The static windsifters of the WS model range can becombined with
all Doppstadt screening systems, thus forming a powerful state-of- all Doppstadt screening systems, thus forming a powerful state-of-
the-art processing unit. Construction debris, C & D waste, industrial the-art processing unit. Construction debris, C & D waste, industrial
waste, bio waste, RDF, waste wood and compost are suitable input waste, bio waste, RDF, waste wood and compost are suitable input
materials for this most innovative realization of substance materials for this most innovative realization of substance
separation by way of windsifting. separation by way of windsifting.

Total weight (kg) 5500 / 5900 / 6300 Total weight (kg) 6000 / 6750 / 7500
Length (mm) 6877 / 8362 / 9847 Length (mm) 6877 / 8362 / 9847
Transport length (mm) 6877 / 8362 / 9847 Transport length (mm) 6877 / 8362 / 9847
DRIVE DRIVE
Engine type Electric Standard Engine type Electric Standard
Make AC current drive Make NORD / SEW
Motor power (kW / PS) 35 / 48 Advantages Motor power (kW / PS) 35 / 48 Advantages
SLS Modular expansion chamber allows for individual lay out design
Power (kW) 22 geared to spefic areas of application Power (kW) 37 geared to spefic areas of application
Air discharge volume 18000 m3/h Aerodynamically optimized blast-pipe system Air discharge volume 24000 Aerodynamically optimized blast-pipe system
Infeed belt with downward buckling prevents larger scraps Infeed belt with downward buckling prevents larger scraps
SEPARATION DRUM SEPARATION DRUM
from mingling with lighweight fraction from mingling with lighweight fraction
Drive Drehstrommotor Drive 3-phase motor
Standardized scaling of all set-up parameters Standardized scaling of all set-up parameters for perfect
Drive power 1,5 kW High conveying speed ensures maximum throughput while Drive power 1,5 kW repeatability of separation results
BLOWER UNIT delivering top-quality separation results BLOWER UNIT High conveying speed ensures maximum throughput while
delivering top-quality separation results
Power (kW) 30 kW Power (kW) 30 kW
SMART SIFTING
Construction type Radialventilator Construction type Radial blower
PRODUCT BOOK 81
WIND SIFTINGLINE
WINDSIFTER LINE WIND SIFTINGLINE
WINDSIFTER LINE
WIND SIFTING WS 2501 WIND SIFTING WS 3001

The static windsifters of the WS model range can becombined with The static windsifters of the WS model range can becombined with
all Doppstadt screening systems, thus forming a powerful state-of- all Doppstadt screening systems, thus forming a powerful state-of-
the-art processing unit. Construction debris, C & D waste, industrial the-art processing unit. Construction debris, C & D waste, industrial
waste, bio waste, RDF, waste wood and compost are suitable input waste, bio waste, RDF, waste wood and compost are suitable input
materials for this most innovative realization of substance materials for this most innovative realization of substance
separation by way of windsifting. separation by way of windsifting.

Total weight (kg) 7770 / 8200 / 8650 Total weight (kg) 8510 / 8970 / 9550
Length (mm) 6877 / 8362 / 9847 Length (mm) 6877 / 8362 / 9847
Transport length (mm) 6877 / 8362 / 9847 Transport length (mm) 6877 / 8362 / 9847
DRIVE DRIVE
Engine type Electric Standard Engine type Electric Standard
Make AC current drive Make AC current drive
Motor power (kW / PS) 50 / 68 Advantages Motor power (kW / PS) 50 / 68 Advantages
Power (kW) 44 geared to spefic areas of application Power (kW) 44 geared to spefic areas of application
Air discharge volume 30000 Aerodynamically optimized blast-pipe system Air discharge volume 36000 Aerodynamically optimized blast-pipe system
Infeed belt with downward buckling prevents larger scraps Infeed belt with downward buckling prevents larger scraps
SEPARATION DRUM SEPARATION DRUM
from mingling with lighweight fraction from mingling with lighweight fraction
Drive Drehstrommotor Drive Drehstrommotor
Standardized scaling of all set-up parameters for perfect Standardized scaling of all set-up parameters for perfect
Drive power 1,5 kW repeatability of separation results Drive power 1,5 kW repeatability of separation results
BLOWER UNIT High conveying speed ensures maximum throughput while BLOWER UNIT High conveying speed ensures maximum throughput while
delivering top-quality separation results delivering top-quality separation results
Power (kW) 45 kW Power (kW) 45 kW
SMART SIFTING
Construction type Radialventilator Construction type Radialventilator
PRODUCT BOOK 83
WINDSIFTER
WINDSIFTERLINE
LINE WINDSIFTER
WINDSIFTERLINE
LINE
WIND SIFTING AIRFLEX 1500 WIND SIFTING WS 2000 K
The windsifters of the WS series can be combined with all The windsifters of the WS model range can becombined with all
Doppstadt screening systems, forming a powerful state-of-the-art Doppstadt screening systems, thus forming a powerful state-of-the-
processing unit. The machine combination is perfectly suitable for a art processing unit. Construction debris, C & D waste, industrial
variety of separation applications, such as the processing of waste, bio waste, RDF, waste wood and compost are suitable input
compost, construction waste,mixed construction waste, commercial materials for this most innovative realization of substance
waste, fuel surrogates, FE post processing, old growth timber,PET separation by way of windsifting.
bottles, slag, scrap metal and biowaste.

Chassis Hook-lift Chassis Steel-tracks
Height (mm) 2360 / 3690 Height (mm) 4111
DRIVE DRIVE
Engine type Electrical / diesel aggregate Engine type Dieselmotor
Marke Caterpillar Marke DEUTZ TCD 3.6 L4

Motor power (kW / PS) 64 / 87 Exhaust level EUROMOT III B
Engine type 2 Electrical / diesel aggregate Fuel tank (l) 300
Marke Caterpillar Advantages Torque (Nm) 480 Advantages
Motor power (kW / PS) 80 / 110 SLS
The machine has been designed for transport in a 40’’ sea Only mobile windsifting solution with usage of complete 2 m
SLS container
Power (kW) 15
working width on infeed belt
Power (kW) 15 Complete utilization of the windsifter geometry using disk Air discharge volume 18500 Very high throughput of up to 150 m³/h
distributors Output stream consisting of up to four fractions
Air discharge volume 13000 SEPARATION DRUM
Highly efficient extraction of light media via SLS extension Standardized scaling of all set-up parameters for perfect
SEPARATION DRUM Drive Hydraulikmotor
SMART SIFTING
Highly mobile unit with hooklift carriage for easy road repeatability of separation results
Drive electric transportation BLOWER UNIT Reliable drive unit of SM product range (diesel-hydraulic)
Drive power 1,5 kW Ready-to-Go thanks to pre-installed generator or power supply Power (kW) 30
via 125 CEE plug
BLOWER UNIT Construction type Radialventilator
Control units remain at ground level throughout
Power (kW) 30 kW
Easy maintenance and operation
Construction type radial fan Maximum process stability thanks to high conveyor discharge
rates
WINDSIFTER
WINDSIFTERLINE
LINE WINDSIFTER
WINDSIFTERLINE
LINE
WIND SIFTING EASY 800 WIND SIFTING EASY 1200

Length (mm) 1217,6 Length (mm) 1870
DRIVE DRIVE
Marke ABB Marke ABB
Motor power (kW / PS) 15 / 20,4 Motor power (kW / PS) 15 / 20,4

SLS SLS
Power (kW) 15 Power (kW) 15
Air discharge volume 11500 Air discharge volume 11500
Advantages
An additional separation stage can be realized which further
enhances the quality of the screen overflow in the same
machine.
Integration into the control cabinet of the system
No machine-specific restrictions apply for the conveyor version
to be mounted at the transition points of the extraction systems
Easy adjustment of static suction lift
SMART SIFTING

Advantages
An additional separation stage can be realized which further
enhances the quality of the screen overflow in the same
machine.
Integration into the control cabinet of the system
No machine-specific restrictions apply for the conveyor version
to be mounted at the transition points of the extraction systems
Easy adjustment of static suction lift
WASH-TROMMEL
WASH-TROMMEL LINE
LINE
SMART WASHING DENSITY SEPARATION GRITBUSTER WT-250

WASH-TROMMEL LINE Applications
WATER TREATMENT LINE
The WT-250 is suitable for many materials, which have to be wet-
screened and separated into an organic and mineral fraction: road
sweepings, gully waste or sand trap material. The removal of the
mineral content is particularly important when a mixture has to be
disposed of by incineration. The removal lowers disposal costs and
the mineral fraction can even be marketed in some cases with
additional positive revenue.

DIMENSIONS
Chassis Static
Length (mm) 11744
Width (mm) 6320
Height (mm) 2658
DRIVE
DISCHARGE CONVEYOR REAR

Width (mm) 820
Length (mm) 2784
WASHING DRUM
Diameter (mm) 1520 Advantages
Length (mm) 3012
reduced disposal costs due to separation into organic and
mineral fraction
reuse or resale of sand and gravel
separation into four fractions
high throughput
robust process
plug & play thanks to integrated control cabinet
SMART WASHING
WASH-TROMMEL
WASH-TROMMEL LINE
LINE WASH-TROMMEL
WASH-TROMMEL LINE
LINE
MOBIL TROMMEL WASH PLANT WB 518 MOBIL TROMMEL WASH PLANT WB 620
The raccoon is a mobile trommel washer with the purpose to The raccoon is a mobile trommel washer with the purpose to
remove adhesions like mud, biofilm, soil etc. from the input material. remove adhesions like mud, biofilm, soil etc. from the input material.
Applications are for example biomass, stones, gravel or plastic. It Applications are for example biomass, stones, gravel or plastic. It
causes intensive interaction between input material and water. Due causes intensive interaction between input material and water. Due
to friction between particles in the drum, adhesions are removed so to friction between particles in the drum, adhesions are removed so
that the recycling material can be further processed. that the recycling material can be further processed.

Chassis 2-axle-trailer Chassis 2-axle-trailer
DRIVE DRIVE
Engine type diesel hydraulic Engine type diesel hydraulic
Marke DEUTZ TCD 2.9 L4 Make DEUTZ TCD 3.6 L4

Exhaust level EUROMOT III B / Tier 4f Exhaust level EUROMOT III B/ Tier 4i
Torque (Nm) max. 300 Advantages Torque (Nm) max. 480
DISCHARGE CONVEYOR REAR DISCHARGE CONVEYOR REAR

Clean, high-quality end products
High throughput
Length (mm) 5500 Easy transport on trailer chassis Length (mm) 5500
Belt speed (m/s) 1.1 Great variability thanks to many configuration options for the Belt speed (m/s) 1.6
Height (mm) up to 3500 basic machine
Height (mm) up to 3500
Reversible intraday backfitting ensures maximum flexibility

Advantages
Mesh size (mm) 8 to 100 Mesh size (mm) 8 to100
Clean, high-quality end products
Drum wall thickness (mm) 6 to 10 Drum wall thickness (mm) 6 to 10 High throughput
Easy transport on trailer chassis
Great variability thanks to many configuration options for the
basic machine
SMART WASHING
Reversible intraday backfitting ensures maximum flexibility
WATER
WATER TREATMENT
TREATMENTLINE
LINE WATER
WATER TREATMENT
TREATMENTLINE
LINE
LAMELLA SEPARATOR HB 40 R LAMELLA SEPARATOR HB 100 R

Water treatment is a supporting process for the water-based Water treatment is a supporting process for the water-based
separation technology from Doppstadt. Whether it is washing, wet separation technology from Doppstadt. Whether it is washing, wet
screening or a density separation, the process works the better the screening or a density separation, the process works the better the
cleaner the water is. The water treatment allows the process water cleaner the water is. The water treatment allows the process water
to be recirculated and thus reduces the consumption of fresh water. to be recirculated and thus reduces the consumption of fresh water.
The lamella clarifier is a settling process for the separation of The lamella clarifier is a settling process for the separation of
settable substances. In combination with flocculants, even settable substances. In combination with flocculants, even
suspended solids can also settle down and be separated in a lamella suspended solids can also settle down and be separated in a lamella
clarifier. clarifier.

DRIVE DRIVE
Motor power (kW / PS) 0.25 / 0.34 Motor power (kW / PS) 0.73 / 1.0
FUNCTIONS FUNCTIONS
Shoulder surface 40m2 Shoulder surface 100m2
Throughput ca. 40m3/h Throughput ca. 100m3/h
Advantages
small foot print (6,5m2) while offering a large separation area Advantages
(40m2)
closed-loop water recycling small foot print (13,5m2) while offering a large separation area
fresh water needs of unit reduced to minimum (100 m2)
closed-loop water recycling
fresh water needs of unit reduced to minimum
SMART WASHING
PRODUCT BOOK 93
WATER
WATER TREATMENT
TREATMENTLINE
LINE WASH-TROMMEL LINE
LAMELLA SEPARATOR IHB 40 R

Applications
In water-based separation processes such as the sink-float
separation (HDS, WT 250) or washing trommel (WB), surface
contaminations like sand and silt are carried over into the water
from the input materials. In order to use the process water as long
as possible these adhesions / impurities must be removed. This
water treatment is carried out in the form of a modular system,
which can be put into operation quickly and has a small foot print.

DIMENSIONS
Chassis Static
Length (mm) 6060
Width (mm) 2440
Height (mm) 2890
DRIVE
Motor power (kW / PS) 6.78 / 9.56
FUNCTIONS
Shoulder surface 40m2
Throughput ca. 40m3/h
Advantages
compact container design
plug and play
reduced water consumption
SMART WASHING
PRODUCT BOOK 95
PRESS
PRESS EXTRUDER
EXTRUDERLINE
LINE
SMART SOLID SCREW PRESS DSP 205

LIQUID SEPARATION
Applications
PRESS EXTRUDER LINE The main application of the DSP 205 is the processing of organic
residues for a subsequent wet fermentation. The bioavailable
fraction of the feed is concentrated in the liquid phase and
separated from packaging and contaminants.
DIMENSIONS
Chassis Static
Length (mm) 9609
Width (mm) 2257
Height (mm) 3652
DRIVE
Engine type pressing screw
Torque (Nm) 18000 - 26000

Engine type 2 mixing hopper
SEPCIFICATIONS
2x15 / 2x20
Advantages
Number of screwshafts one pressing screw, two mixing screws no pre-shredding or pre-screening
Diameter (mm) pressing screw: 500mm, mixing screws: very low plastic contamination of the filtrate due to
480mm disintegration of packages via shear stress
insensitivity to foreign bodies with a diameter of up to 80 mm
low energy consumption due to co-rotating pressing cone
Loading width (mm) 3710 easy maintenance due to bolted wear segments
SMART SLS
PRODUCT BOOK 97
MIXER
MIXER LINE
LINE
SMART MIXING
MIXER DM 215 E
MIXER LINE Applications
The range of applications of the stationary Doppstadt batch mixers
covers the mixing of biowaste and green waste in composting
plants, the homogenization in mechanical-biological treatment
(MBT) plants, in biogas plants and for various mixing tasks in the
field of recycling.

DIMENSIONS
Chassis Static
Length (mm) 7720
Width (mm) 2500
Height (mm) 3766
DRIVE
MIXING CHAMBER

Volume (m3) 15
Number of screwshafts 3
Diameter (mm)
Loading width (mm)
upper screws 700 / lower 1100 mm
3775
Advantages
homogenization of most difficult feed materials
high throughput capacity due to intensive mixing motion
three robust mixing screws with interchangeable mixing paddles
different forms of mixing paddles according to application
large service doors for easy accessibility
one-man operation due to optional remote control
direct drive with standard AC motor and generously
dimensioned drive chain
very sturdy and durable frame design and wear lining inside the
mixing chamber
SMART MIXING
PRODUCT BOOK 99
THIS IS DOPPSTADT Locations Deutschland
Best Solution. Smart Recycling.
DOPPSTADT CALBE GMBH
Barbyer Chaussee 3 • 39240 Calbe/Saale • Germany
Doppstadt is one of the world’s leading veying. The company employs 700 in Germany. We make sure that none of stallations. Our highly skilled technici- T +49 (0) 39 291 55-0 • F +49 (0) 39 291 55-350
suppliers of innovative solutions in the people in locations all over the world your day to day servicing gets forgotten ans in their well equipped vehicles can [email protected]
field of environmental technology. to work on its machines, processes and that your Doppstadt equipment gets provide fast and competent support.
The company specialises in the treat- and solutions. The Group has an the love and care it needs. Regularly ser- Doppstadt Telematics enable you and WERNER DOPPSTADT UMWELTTECHNIK GMBH & CO.KG
ment and processing of reusable ma- international network of dealers, viced machines have fewer breakdowns us to observe exactly what's happening Steinbrink 13 • G – 42555 Velbert • Germany
terials obtained from waste, biomass, with 42 partners in 45 countries. The and major damage can be minimised or on your machines and systems. From
earth, sand and gravel. Its portfolio Doppstadt Group was founded in prevented altogether. this we are able to provide simple and DOPPSTADT SYSTEMTECHNIK GMBH
includes easy-to-maintain, easy-to- 1965 and has centres of expertise at cost-effective telephone support in the Steinbrink 4 • 42555 Velbert • Germany
use machines for the most complex Velbert (prototype development and Subject to supplemental agreement, we event of problems. P +49 (0) 20 52 8 89-0 • F +49 (0) 20 52 8 89-144
and challenging applications such as production), Wülfrath (sales and ser- are able to tailor-make a service solution [email protected]
crushing, separating, sifting, mixing, vice), Calbe (series production) and to meet your operational needs whether
splitting, wet processing and con- Wilsdruff (water based separation), it be for mobile equipment or static in- DOPPSTADT WATER SEPARATION SYSTEMS GMBH
Steinbrink 4 • 42555 Velbert • Germany
T +49 (0) 20 52 8 89-0 • F +49 (0) 20 52 8 89-596
Please contyct us for any further informations. doppstadt.com [email protected]
THIS IS DOPPSTADT 101

April 2019
Werner Doppstadt
Umwelttechnik GmbH & Co. KG
Steinbrink 13, 42555 Velbert
Deutschland
Telefon +49 2052 889-0

doppstadt.com [email protected]

Doppstadt Product Book

Uploaded by

Document Informationclick to expand document information

Copyright:

Available Formats

Doppstadt Product Book

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Doppstadt Product Book

Uploaded by

Copyright:

Available Formats

PRODUCT BOOK

Best Solution. Smart Recycling. doppstadt.com

TROMMEL LINE STAR SCREEN LINE SPLITTER LINE FLATFLEX LINE

SIDE TURNER LINE WINDROW TURNER LINE

WATERSIFTER LINE WINDSIFTER LINE

PRODUCT BOOK 2019

Gritbuster Racoon Lamella Clarifier/ Integrated Lamella Clarifier

DISCHARGE CONVEYOR Advantages Advantages

DRIVE Transport width (mm) 3072

INFEED HOPPER INFEED HOPPER

DRIVE Transport width (mm) 2150

INFEED HOPPER INFEED HOPPER

Fuel tank (l) 900 Torque (Nm) 2000

SMART SCREENING DRUM SCREEN 518 FLEX

DRUM SCREEN SM 518 PLUS DRUM SCREEN SM 620 PLUS

SCREEN DRUM SCREEN DRUM

DRUM SCREEN SM 620 K PLUS DRUM SCREEN SM 620 SA PLUS

DRUM SCREEN SM 720 SA PLUS DRUM SCREEN SST 518

DRIVE Motor power (kW / PS) 11 / 15

DRUM SCREEN SST 720 DRUM SCREEN SST 725

SCREEN DRUM Torque (Nm) 2690

DRUM SCREEN SST 1025 DRUM SCREEN SST 1525

SCREEN DRUM SCREEN DRUM

Mesh type squared, round

DRUM SCREEN SM 518 A DRUM SCREEN SM 518 F

SCREEN DRUM SCREEN DRUM

Mesh type squared, round Mesh type squared, round

DRUM SCREEN SM 620 A STAR SCREEN DST 512

Mesh type squared, round

Easy accessibility thanks to open construction

STAR SCREEN DST 712 SPLITTER UNIT 325

DRIVE Transport width (mm) 2900

Advantages LOWER SCREENING DECK

Width (mm) 2500

SPLITTER UNIT 425 SPLITTER UNIT 625

LOWER SCREENING DECK

LOWER SCREENING DECK

STAR SCREEN HS 401 SELECTOR SPIRAL SHAFT SEPARATOR SELECTOR 400

Simple, robust construction, no electrics, powered by pre-

SPIRAL SHAFT SEPARATOR SELECTOR 800

LOWER SCREENING DECK Advantages

Fuel tank (l) 750

CHIPPER DH 811 K CHIPPER DH 811 L

CHIPPER DH 812 CHIPPER DH 812 LD

DRIVE Marke Mecedes Arocs 3648

Rotor Width (mm) 1200

CHIPPER DH 910 SA CHIPPER DH 910 SA E

CHIPPER DH 910 SA-B CHIPPER DH 910 SA-B E

SMART TURNING WINDROW TURNER DU 265

WINDROW TURNER DU 320 NEW: WINDROW TURNER SERIES SCARAB

Rubber covered tunnel or stainless steel

Choice of auger style or

• Design flexibility reduces your total operating costs:

• With more design options than any other manufacturer

SMART SIFTING DENSITY SEPARATION HDS-S

DENSITY SEPARATION HDS-M WIND SIFTING WS 1001

DRIVE Transport height (mm) 2300

WIND SIFTING WS 1501 WIND SIFTING WS 2001