Scribd Logo
Upload

Welcome to Scribd!

  • 80 views

    Caradol Ed28-200

    Uploaded by

    Yunus Kurt
    This datasheet provides information about CARADOL ED28-200, a 4000 molecular weight polyoxypropyleneglycol designed for use in producing polyurethane coatings, adhesives, sealants and elastomers. It has a clear liquid appearance, 1.002 kg/l density, and 970 mPa.s viscosity. Storage and handling requirements include avoiding contamination with water and storing in clean tanks or drums between 20-25°C.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Caradol Ed28-200

    Uploaded by

    Yunus Kurt
    80 views2 pages
    This datasheet provides information about CARADOL ED28-200, a 4000 molecular weight polyoxypropyleneglycol designed for use in producing polyurethane coatings, adhesives, sealants and elastomers. It has a clear liquid appearance, 1.002 kg/l density, and 970 mPa.s viscosity. Storage and handling requirements include avoiding contamination with water and storing in clean tanks or drums between 20-25°C.

    Original Description:

    CARADOL ED28-200

    Original Title

    CARADOL ED28-200

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This datasheet provides information about CARADOL ED28-200, a 4000 molecular weight polyoxypropyleneglycol designed for use in producing polyurethane coatings, adhesives, sealants and elastomers. It has a clear liquid appearance, 1.002 kg/l density, and 970 mPa.s viscosity. Storage and handling requirements include avoiding contamination with water and storing in clean tanks or drums between 20-25°C.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    80 views2 pages

    Caradol Ed28-200

    Uploaded by

    Yunus Kurt
    This datasheet provides information about CARADOL ED28-200, a 4000 molecular weight polyoxypropyleneglycol designed for use in producing polyurethane coatings, adhesives, sealants and elastomers. It has a clear liquid appearance, 1.002 kg/l density, and 970 mPa.s viscosity. Storage and handling requirements include avoiding contamination with water and storing in clean tanks or drums between 20-25°C.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

     

    DATASHEET
    CARADOL ED28-200
    URETHANE CHEMICALS FOR CASE APPLICATIONS

    U1790
    Revised February 2018

    CARADOL ED28-200 is a 4000 molecular weight polyoxypropyleneglycol designed as an intermediate for the production of
    polyurethane coatings, adhesives, sealants and elastomers. It is manufactured to close specifications ensuring a high degree of
    consistency.
    TYPICAL PROPERTIES
    PROPERTY TEST METHOD UNIT VALUE

    Appearance clear liquid


    Colour Hazen ASTM D1209 15
    Hydroxyl value ASTM D4274D mg KOH/g 28
    Density (20°C) ASTM D4052 kg/l 1.002
    Water content ASTM D4672 %m/m 0.03
    Total acidity ASTM D4662 mg KOH/g 0.03
    Viscosity (25°C) ASTM D445 mPa.s 970
    pH* SMS 2801 6
    Flash point ASTM D93 °C >140

    *Measured in 10:6 IPA/water solution

    VISCOSITY/TEMPERATURE CHARACTERISTICS DENSITY/TEMPERATURE CHARACTERISTICS

    The above typical properties are published as a guide to potential users of the product. A sales specification is published
    separately.
    CARADOL ED28-200
    POLYETHER POLYOLS FOR CASE APPLICATIONS

    Test Methods HAZARD IDENTIFICATION


    ASTM standards are published by the American Society for
    Testing and Materials at www.astm.org. SMS methods Low order of acute toxicity by the oral or precutaneous
    (Shell Methods Series) can be obtained through the local routes, neither irritating nor sensitising to the skin. Slightly
    Shell company. irritating to the eyes.
    This product is not in the 'flammable' range, but will burn.
    Storage and handling Before handling the product refer to the Safety Data Sheet.
    CARADOL ED28-200 is slightly hygroscopic and must be
    stored under conditions so that contamination with water PRODUCT CODE
    and absorption of moisture are prevented. Contact with U1790
    copper, copper alloys or zinc must be avoided.
    DISCLAIMER
    The storage temperature of CARADOL ED28-200 is not CARADOL is a Shell trade mark.
    critical, in that there will be no hazardous conditions
    created by the storage of the product at any ambient The expression ‘Shell Chemicals’ refers to the companies of
    temperature likely to be encountered. It should be noted the Royal Dutch / Shell Group which are engaged in
    however that a normal storage temperature, ensuring chemical businesses. Each of the companies which make
    optimum processing conditions when using the product, is up the Royal Dutch / Shell Group of companies is an
    between 20ºC and 25ºC and that storage at low independent entity and has its own separate identity.
    temperatures may result in the product viscosity being too The information contained in this publication is to the best
    high for transfer from the storage container with the pumps of our knowledge, true and accurate, but any
    available. recommendations or suggestions which may be made are
    without guarantee, since the conditions of use are beyond
    CARADOL ED28-200 is a stable product and its our control. Furthermore, nothing contained herein shall be
    processing performance is not expected to deteriorate construed as a recommendation to use any product in
    significantly with time providing it is stored as below. As conflict with existing patents covering any material or its
    good industrial practice however it is recommended that it use.
    is not stored for periods longer than 2 years.  
    Bulk
    Tanks should be of stainless steel or of mild steel, free of
    mill scale or rust and maintained in a rust free condition.
    When desired, the latter can be lined with an epoxide
    resin paint or zinc silicate paint approved for this service.
    Small tanks must be fitted with silica gel breathers,
    inspected and regenerated at regular intervals; large tanks
    (of volumes greater than 1000 m³) should be fitted for
    blanketing with dry nitrogen. Heating facilities may be
    necessary and where this is the case, care should be taken
    to ensure that heating coil skin temperatures do not exceed
    100ºC.

    Lines should be of stainless steel or mild steel maintained in


    a rust free condition. Trace heating may be necessary in
    cold climates. Hoses should be of polypropylene, stainless
    steel or wire bound canvas.

    Drums
    CARADOL ED28-200 should be stored in dry conditions
    away from direct sources of heat, preferably in the
    unopened original containers. Opened drums must be
    reclosed tightly immediately after drawing off material.

    For further information please contact your local sales representative or visit
    www.caradol.com
    www.shell.com/chemicals/customer

    You might also like