Air Conditioning Network Service System PCNGO1214B

Preventive Maintenance
The intelligent Touch Manager can be connected to Daikin’ s own Air Conditioning Network Service System
for remote monitoring and verification of operation status for VRV system. By its ability to predict
malfunctions, this service provides customers with additional peace of mind.

Enhanced convenience with link to the Air Conditioning Network Service System
The intelligent Touch Manager connects seamlessly to Daikin’s 24-hour Air Conditioning Network Service System.

ACC centre
Personnel at the centre monitor the
occurrence of malfunctions and track
Trouble their cause via the Internet.
Advance malfunction warnings help
prevent the sudden occurrence of
problems later.
Even malfunctions difficult to identify Air Conditioning Network Service System*
can be monitored remotely.
Repair *Because of restrictions
Allows dispatching of Enable prompt repairs as service engineers
in applicable areas and
service engineers without know the cause of the problem beforehand.
release times, please consult
a Daikin representative
a call from customers. separately for details.

One touch selection to total air comfort

Daikin Offers a Variety of Control Systems

Convenient controllers that offer more freedom to administrators

Ease of use and expanded control functions

The user-friendly controller features colours, multilingual function, and icons in the display for ease of
understanding. A wide variety of control methods can be accommodated, permitting administrators to
monitor and operate the system even when they are away from the controller.
DCS601C51

Connect VRV system to your BMS via BACnet or LONWORKS

® ®

Compatible with BACnet® and

LONWORKS®, the two leading open
BACnet® LonWORKS®
network comunication protocols, Daikin Seamless connection Facilitating the network
offers interfaces that provide a seamless between VRV system integration of
connection between VRV system and and BACnet® open VRV system
your BMS. network protocol. and LONWORKS®
DMS502B51 DMS504B51
Dedicated interfaces make (Interface for use in BACnet® ) (Interface for use in LONWORKS® )
Daikin air conditioners freely Notes: 1.BACnet®is a registered trademark of American Society of Heating , Refrigerating and
compatible with open networks Air-Conditioning Engineers(ASHRAE).
2.LONWORKS® is a trademark of Echelon Corporation registered in the United States and other countries.

Using intelligent Touch Manager

1. A Daikin-trained engineer must perform installation of the intelligent Touch Manager.
2. The clock of the intelligent Touch Manager should be adjusted once a month.
3. Daikin’s unique PPD system calculates the energy consumption of each indoor unit based on its operation data output. Note that PPD is not a “meter”
adapted to the methods of measuring electrical power consumption in each country. Tenant billing systems differ by country according to each country’s
respective legal system. Data obtained by PPD is for reference use only and should not be used for official financial transactions.

Specifications, designs and other content appearing in this brochure are current as of December 2015 but subject to change without notice.
12/15 AD ALL IN ONE
System solution for management of building air conditioning
 One touch selection enables flexible control of equipment in a building.

Various types of equipment in a building

can be controlled by a single controller.
Individual air-conditioning control Energy control
The flexible control achieved by the VRV system precisely meets The status of energy consumption in a building (e.g. electricity,
different air conditioning needs in each room (e.g. offices, gas) can be checked and analyzed. The data can then be
conference rooms, hotel rooms). effectively utilized to ensure energy-efficient operation.

Environmental monitoring
The indoor environment (e.g. temperature, humidity, illuminance)
can be monitored via various sensors. This feature is effective for
controlling and maintaining comfort.

Smart phone operation

Air conditioners can be operated by smart phones via Wi-Fi.
Lighting control DALI-compatible
DALI-compatible This feature is effective as a value-added service for tenants etc.
DALI-compatible LED lighting systems can be controlled and
monitored. Lighting control is enhanced through an interlock
function with air conditioners and other functions.

Smart phone
You can control VRV system from
anywhere through Wi-Fi

Energy-efficient control of air

Air-conditioning control for large spaces conditioning and lighting is the key
Air handling units can also be controlled. Large spaces, such as
entrance halls and shopping malls, can be easily controlled to
to cutting energy costs.
ensure comfort. Electricity consumption ratio in typical office buildings

Other
12%

Office
device
16%
HVAC
48%
Lighting
24%
Building equipment control
Various types of equipment other than air conditioners, including
ventilators, fans, and pumps, can also be controlled.
HVAC and lighting
account for 72%.

Source: Agency for Natural Resources and Energy, Government of Japan

Pump Fan

1 2
 One touch selection enables flexible control of equipment in a building.

Various types of equipment in a building

can be controlled by a single controller.
Individual air-conditioning control Energy control
The flexible control achieved by the VRV system precisely meets The status of energy consumption in a building (e.g. electricity,
different air conditioning needs in each room (e.g. offices, gas) can be checked and analyzed. The data can then be
conference rooms, hotel rooms). effectively utilized to ensure energy-efficient operation.

Environmental monitoring
The indoor environment (e.g. temperature, humidity, illuminance)
can be monitored via various sensors. This feature is effective for
controlling and maintaining comfort.

Smart phone operation

Air conditioners can be operated by smart phones via Wi-Fi.
Lighting control DALI-compatible
DALI-compatible This feature is effective as a value-added service for tenants etc.
DALI-compatible LED lighting systems can be controlled and
monitored. Lighting control is enhanced through an interlock
function with air conditioners and other functions.

Smart phone
You can control VRV system from
anywhere through Wi-Fi

Energy-efficient control of air

Air-conditioning control for large spaces conditioning and lighting is the key
Air handling units can also be controlled. Large spaces, such as
entrance halls and shopping malls, can be easily controlled to
to cutting energy costs.
ensure comfort. Electricity consumption ratio in typical office buildings

Other
12%

Office
device
16%
HVAC
48%
Lighting
24%
Building equipment control
Various types of equipment other than air conditioners, including
ventilators, fans, and pumps, can also be controlled.
HVAC and lighting
account for 72%.

Source: Agency for Natural Resources and Energy, Government of Japan

Pump Fan

1 2
 By controlling the VRV system using the intelligent Touch Manager, Air-conditioning power consumption can be reduced by
energy saving can be promoted while maintaining comfort 20 to 30%, using energy-efficient control
Case Study at actual building
Comfort with minimum energy
In office buildings, approx.
CASE 1: Office
The air-conditioning power consumption was cut by 32%.
30-50% of total electricity (kWh)*A/C ( ˚C )
18,000
consumption is occupied by air FY12 power consumption
Space heating FY13 power consumption 30.0
conditioning. 16,000
FY12 OA temp
intelligent Touch Manager provides a FY13 OA temp
14,000
huge potential of cost saving. Space cooling 25.0

12,000

20.0
10,000

Ventilation
Project detail 8,000 15.0
Floor area: 1,400m2
VRV ODU: 100HP 6,000
* Verification target is only for 8th floor of the building. 10.0

4,000
Schedule the operation time for each application. Define the setpoint range that users can change. Background
•All control was done by users with local 5.0
With Remote controller 2,000
remote controllers.
I’m dying in hot. •No centralized controller was installed
Pi ! 0 0.0
Jul Aug Sep Oct Nov Dec Jan Feb Mar Apr May Jun
What’s New
Recepion: Very cold. •Our centralized controller has been installed. New control Content
Office: 9:00–17:00
•The following three control logics have
8:00-18:00 16°C Setpoint restriction
24-32°C(Cooling)
Admin:
been newly added. 16-20°C(Heating)
8:30–17:00 26°C(Cooling)
Machine room: Setpoint reset every morning
18°C(Heating)
24 hours
Turn OFF by schedule 17:30 and 21:00
With Control System
Manager
room:8:00-20:00
Set point range 22°C - 28°C
Case Study at actual building
Wh y ? It can not
CASE 2: University
26%.
be set
Common area: below this Oh! Cool.
Meeting room: 9:00–17:00 The total power consumption in the building was cut by
No schedule 2013 2014
Before After
(kWh)
22°C *Bldg. 4,976kWh/day 3,695kWh/day (ºC)
6,000 35
Power consumption
OA temperature
30
5,000
Turn the unit OFF if a user didn’t. Reset setpoint regularly.
25
4,000

20

Project detail 3,000

Floor area: 8,100m2 15
*900m2 / floor VRV ODU: 796HP
Change to 20°C Background
2,000
10

Stop Start •All control was done by users with

local remote controllers. 1,000
Working hours Turn ON again by remote controller, 5
(Scheduled) forgot to turn OFF, and left. 24ºC •No centralized controller was installed.
Saved power consumption •Setpoints were not controlled. 0 0
by control system * Less than 20˚C on average. June July Aug Sep Oct Nov Dec Jan Feb Mar Apr May June July
20ºC
Saved power consumption What’s New
by control system •Our centralized controller has been installed. New control Content
8:00 10:00 18:00 8:00 •The following three control logics have
8:00 17:00 18:30 8:00 Setpoint restriction 22-32°C(Cooling)
been newly added.
Setpoint reset everyday 24°C(Cooling)
Turn off Automatically tum OFF
as scheduled to cut wasteful operation Set at 24°C Reset to 24°C
Turn OFF by schedule 19:00 and 21:00

3 4
 By controlling the VRV system using the intelligent Touch Manager, Air-conditioning power consumption can be reduced by
energy saving can be promoted while maintaining comfort 20 to 30%, using energy-efficient control
Case Study at actual building
Comfort with minimum energy
In office buildings, approx.
CASE 1: Office
The air-conditioning power consumption was cut by 32%.
30-50% of total electricity (kWh)*A/C ( ˚C )
18,000
consumption is occupied by air FY12 power consumption
Space heating FY13 power consumption 30.0
conditioning. 16,000
FY12 OA temp
intelligent Touch Manager provides a FY13 OA temp
14,000
huge potential of cost saving. Space cooling 25.0

12,000

20.0
10,000

Ventilation
Project detail 8,000 15.0
Floor area: 1,400m2
VRV ODU: 100HP 6,000
* Verification target is only for 8th floor of the building. 10.0

4,000
Schedule the operation time for each application. Define the setpoint range that users can change. Background
•All control was done by users with local 5.0
With Remote controller 2,000
remote controllers.
I’m dying in hot. •No centralized controller was installed
Pi ! 0 0.0
Jul Aug Sep Oct Nov Dec Jan Feb Mar Apr May Jun
What’s New
Recepion: Very cold. •Our centralized controller has been installed. New control Content
Office: 9:00–17:00
•The following three control logics have
8:00-18:00 16°C Setpoint restriction
24-32°C(Cooling)
Admin:
been newly added. 16-20°C(Heating)
8:30–17:00 26°C(Cooling)
Machine room: Setpoint reset every morning
18°C(Heating)
24 hours
Turn OFF by schedule 17:30 and 21:00
With Control System
Manager
room:8:00-20:00
Set point range 22°C - 28°C
Case Study at actual building
Wh y ? It can not
CASE 2: University
26%.
be set
Common area: below this Oh! Cool.
Meeting room: 9:00–17:00 The total power consumption in the building was cut by
No schedule 2013 2014
Before After
(kWh)
22°C *Bldg. 4,976kWh/day 3,695kWh/day (ºC)
6,000 35
Power consumption
OA temperature
30
5,000
Turn the unit OFF if a user didn’t. Reset setpoint regularly.
25
4,000

20

Project detail 3,000

Floor area: 8,100m2 15
*900m2 / floor VRV ODU: 796HP
Change to 20°C Background
2,000
10

Stop Start •All control was done by users with

local remote controllers. 1,000
Working hours Turn ON again by remote controller, 5
(Scheduled) forgot to turn OFF, and left. 24ºC •No centralized controller was installed.
Saved power consumption •Setpoints were not controlled. 0 0
by control system * Less than 20˚C on average. June July Aug Sep Oct Nov Dec Jan Feb Mar Apr May June July
20ºC
Saved power consumption What’s New
by control system •Our centralized controller has been installed. New control Content
8:00 10:00 18:00 8:00 •The following three control logics have
8:00 17:00 18:30 8:00 Setpoint restriction 22-32°C(Cooling)
been newly added.
Setpoint reset everyday 24°C(Cooling)
Turn off Automatically tum OFF
as scheduled to cut wasteful operation Set at 24°C Reset to 24°C
Turn OFF by schedule 19:00 and 21:00

3 4
 For Energ y Saving & Comfort
intelligent Touch Manager maximises the advantages of VRV features In addition to switching lights on and off, advanced lighting control,
intelligent Touch Manager is an advanced multi-zone controller that provides the most cost-effective way to
such as illuminance adjustment, can be achieved
control and monitor the Daikin VRV system. Lighting control (Option)
The 10.4" LCD touch screen is easy to use with three different screen views to include the floor plan layout
Connection to DALI - compatible lighting control system
view, icon view and list view and menus for system configurations. DALI-compatible
DALI-compatible
Simple wiring (daisy chain) enables management of LED lighting by the
It is also easy to use with standardized remote Web Access from your PC. Please contact your local sales office for details.
intelligent Touch Manager.
It can manage a total of 650 management points consisting of up to 512 Daikin indoor unit groups ( up to
Various air conditioning and lighting control is enabled through the interlock
1024 indoor units ) along with building equipment control / monitoring with Digital Inputs / Output ( Di/Dio ) , with occupancy sensors and illuminance sensors.
Analog Inputs / Output ( Ai/Ao ) and Pulse input ( Pi ) optional devices.
Air conditioning and lighting for which power consumption is high can be
efficiently controlled to promote energy conservation and cost reduction!
Lighting control achieved by
the intelligent Touch Manager
[ Operation ] System
• Switch-on/switch-off operation
• Illuminance (1–100%) control
• Various illuminance patterns can be
Only When and Where Necessary registered DCM009A51
(BACnet Client option)
• Registered pattern can be selected from LAN

Flexible control can be achieved to meet air conditioning needs in each room intelligent Touch Manager
WAGO I/O system
Saving energy by preventing wasteful operation in unoccupied periods [ Monitoring ] BACnet DALI module
• Switch-on/switch-off status monitoring controller 753-647
750-831 DALI BUS
• Lighting abnormality monitoring
Tenant 1 • Illuminance monitoring
Working day: Mon - Fri • DALI occupancy sensor monitoring DALI LED driver
Working hours: 9:00 - 17:30 • DALI illuminance sensor monitoring
Sensor
Setpoint: 24°C LED light (occupancy /
illuminance)

Tenant 1
[ Overview of control ]
Tenant 2
• Up to 5 DALI modules can be connected to a • 64 DALI addresses can be freely assigned to up • Up to 12 sensors (occupancy, illuminance) can
single BACnet controller. to 16 groups using a single DALI module. be connected to a single DALI module.
Tenant 3 (Each group corresponds to a management
• Up to 64 DALI LED drivers (64 addresses) can • DALI BAS simplifies wiring and setting work by
point of the intelligent Touch Manager.)
Tenant 2 be connected to a single DALI module. daisy chain wiring and automatic address
Tenant 4 • Up to 16 scenes can be set to a single DALI setting.
Working day: Mon - Fri module.
Working hours: 8:00 - 17:00
Setpoint: 22°C

Easy maintenance and energy saving by lighting control

Case1 Case2 Case3
Switch-on / switch-off and Occupancy sensors are used to Lighting abnormalities
illuminance are controlled based on a eliminate both wasteful lighting and air (e.g. burned-out bulbs) can be
Tenant 3 schedule to cut wasteful power conditioning. checked on
Working day: Mon - Sat consumption. When a room is unoccupied, the intelligent Touch Manager screen.
Working hours: 8:00 - 19:00 the air conditioning stops and the Lighting maintenance becomes easier and
Setpoint: 25°C quicker.
• Failing to switch lighting is switched off.
off lights is prevented.

OFF OFF
Requirements for air conditioning system depend on the
application of buildings.
In this example, each floor of the office building is occupied
by different tenants, and they have their own preferences
Tenant 4
due to their working days and hours.
Working day: Mon - Sun
intelligent Touch Manager has the flexible schedule Working hours: 7:00 - 23:00
programme which can set specific operation days, time, Setpoint: 20°C
and setpoint for each tenant or even each indoor unit.
The layout screen enables quick
Therefore the air conditioning system can operate only
• Optimal illuminance reduces energy. identification of specific locations.
when and where necessary irrespective of the motivation
for energy saving of the tenants.

5 6
 For Energ y Saving & Comfort
intelligent Touch Manager maximises the advantages of VRV features In addition to switching lights on and off, advanced lighting control,
intelligent Touch Manager is an advanced multi-zone controller that provides the most cost-effective way to
such as illuminance adjustment, can be achieved
control and monitor the Daikin VRV system. Lighting control (Option)
The 10.4" LCD touch screen is easy to use with three different screen views to include the floor plan layout
Connection to DALI - compatible lighting control system
view, icon view and list view and menus for system configurations. DALI-compatible
DALI-compatible
Simple wiring (daisy chain) enables management of LED lighting by the
It is also easy to use with standardized remote Web Access from your PC. Please contact your local sales office for details.
intelligent Touch Manager.
It can manage a total of 650 management points consisting of up to 512 Daikin indoor unit groups ( up to
Various air conditioning and lighting control is enabled through the interlock
1024 indoor units ) along with building equipment control / monitoring with Digital Inputs / Output ( Di/Dio ) , with occupancy sensors and illuminance sensors.
Analog Inputs / Output ( Ai/Ao ) and Pulse input ( Pi ) optional devices.
Air conditioning and lighting for which power consumption is high can be
efficiently controlled to promote energy conservation and cost reduction!
Lighting control achieved by
the intelligent Touch Manager
[ Operation ] System
• Switch-on/switch-off operation
• Illuminance (1–100%) control
• Various illuminance patterns can be
Only When and Where Necessary registered DCM009A51
(BACnet Client option)
• Registered pattern can be selected from LAN

Flexible control can be achieved to meet air conditioning needs in each room intelligent Touch Manager
WAGO I/O system
Saving energy by preventing wasteful operation in unoccupied periods [ Monitoring ] BACnet DALI module
• Switch-on/switch-off status monitoring controller 753-647
750-831 DALI BUS
• Lighting abnormality monitoring
Tenant 1 • Illuminance monitoring
Working day: Mon - Fri • DALI occupancy sensor monitoring DALI LED driver
Working hours: 9:00 - 17:30 • DALI illuminance sensor monitoring
Sensor
Setpoint: 24°C LED light (occupancy /
illuminance)

Tenant 1
[ Overview of control ]
Tenant 2
• Up to 5 DALI modules can be connected to a • 64 DALI addresses can be freely assigned to up • Up to 12 sensors (occupancy, illuminance) can
single BACnet controller. to 16 groups using a single DALI module. be connected to a single DALI module.
Tenant 3 (Each group corresponds to a management
• Up to 64 DALI LED drivers (64 addresses) can • DALI BAS simplifies wiring and setting work by
point of the intelligent Touch Manager.)
Tenant 2 be connected to a single DALI module. daisy chain wiring and automatic address
Tenant 4 • Up to 16 scenes can be set to a single DALI setting.
Working day: Mon - Fri module.
Working hours: 8:00 - 17:00
Setpoint: 22°C

Easy maintenance and energy saving by lighting control

Case1 Case2 Case3
Switch-on / switch-off and Occupancy sensors are used to Lighting abnormalities
illuminance are controlled based on a eliminate both wasteful lighting and air (e.g. burned-out bulbs) can be
Tenant 3 schedule to cut wasteful power conditioning. checked on
Working day: Mon - Sat consumption. When a room is unoccupied, the intelligent Touch Manager screen.
Working hours: 8:00 - 19:00 the air conditioning stops and the Lighting maintenance becomes easier and
Setpoint: 25°C quicker.
• Failing to switch lighting is switched off.
off lights is prevented.

OFF OFF
Requirements for air conditioning system depend on the
application of buildings.
In this example, each floor of the office building is occupied
by different tenants, and they have their own preferences
Tenant 4
due to their working days and hours.
Working day: Mon - Sun
intelligent Touch Manager has the flexible schedule Working hours: 7:00 - 23:00
programme which can set specific operation days, time, Setpoint: 20°C
and setpoint for each tenant or even each indoor unit.
The layout screen enables quick
Therefore the air conditioning system can operate only
• Optimal illuminance reduces energy. identification of specific locations.
when and where necessary irrespective of the motivation
for energy saving of the tenants.

5 6
 Not Only VRV System, but Also Other Building Equipment Remote monitoring

Integrated control for air conditioning in large spaces can be achieved by a single controller Multiple buildings can be managed from one site
A wide variety of equipment can be connected Remote monitoring control
The Web function enables management for the Daikin VRV system with other building equipment integrated into
intelligent Touch Manager covers not only the VRV system intelligent Touch Manager that can be accessed from your PC*.
but also other air conditioning systems (e.g. air handling units)
All operations and system configurations which you can do on the intelligent Touch Manager touch screen can be
and building equipment (e.g. sensors). done through Web access.
VRV system
E-mail alert enables prompt response by service engineers based timely and precise knowledge
of what happened in the system at the remote site.

Property Manager /
BACnet / IP Engineering

RS485

Network / Internet
Unified Monitoring and
One D -NET system Control
Di / Pi Max. 64 indoor unit groups (128 indoor units)

Fire alarm,
Electricity monitoring Outdoor‐air processing

Fire alarm kWh meter

All views and menus can be accessed via Web

Air handling unit Chiller

*Flash player is required.

WAGO I/O up to 30 nodes

E-mail alerts for reporting malfunctions

Building equipment E-mail alerts are sent immediately to inform E-mail alerts are
sent to
Lighting, pump, fan, keycard switch, concerned parties of malfunctions involving smartphones and
window contact switch, sensors equipment connected to the intelligent Touch PCs.
( temperature, humidity, CO2, lux, occupancy... ) Manager. Conveying equipment models and error Up to 10 e-mail addresses
codes, these e-mail alerts enable recipients to can be registered.
Pump Fan Keycard switch Sensor take prompt action and can be set for specific
equipment.

A wideservice
Effective varietyfunctions
of equipment can
offered be con
to tenants
Smart phone will be a remote controller of VRV system (Option)
Users can operate and For buildings VRV Smart phone Remote Controller To be released in April 2016 For house VRV Smart phone Control System
check the status of VRV Indoor unit VRV Indoor unit
Up to 512 indoor units can be controlled. Up to 64 indoor units can be controlled.
VRV system from their smart
phones via Wi-Fi. Just add SVMPRC2 to Just add SVMPR1 to
It is not necessary to move this system this system
where a remote controller is
located with this feature.
VRV system in other rooms SVMPR1
SVMPRC2 VRV VRV
can be operated, and their Outdoor unit Outdoor unit
status can be checked. It is
LAN cable LAN cable
also possible to check if air
conditioners in other rooms You can control
remain switched on etc., You can control VRV system from Monitor Control
VRV system from anywhere in your house
helping achieve energy anywhere through Wi-Fi
Wi-Fi router Wi-Fi router Smart phone through Wi-Fi
saving. Smart phone

7 8
 Not Only VRV System, but Also Other Building Equipment Remote monitoring

Integrated control for air conditioning in large spaces can be achieved by a single controller Multiple buildings can be managed from one site
A wide variety of equipment can be connected Remote monitoring control
The Web function enables management for the Daikin VRV system with other building equipment integrated into
intelligent Touch Manager covers not only the VRV system intelligent Touch Manager that can be accessed from your PC*.
but also other air conditioning systems (e.g. air handling units)
All operations and system configurations which you can do on the intelligent Touch Manager touch screen can be
and building equipment (e.g. sensors). done through Web access.
VRV system
E-mail alert enables prompt response by service engineers based timely and precise knowledge
of what happened in the system at the remote site.

Property Manager /
BACnet / IP Engineering

RS485

Network / Internet
Unified Monitoring and
One D -NET system Control
Di / Pi Max. 64 indoor unit groups (128 indoor units)

Fire alarm,
Electricity monitoring Outdoor‐air processing

Fire alarm kWh meter

All views and menus can be accessed via Web

Air handling unit Chiller

*Flash player is required.

WAGO I/O up to 30 nodes

E-mail alerts for reporting malfunctions

Building equipment E-mail alerts are sent immediately to inform E-mail alerts are
sent to
Lighting, pump, fan, keycard switch, concerned parties of malfunctions involving smartphones and
window contact switch, sensors equipment connected to the intelligent Touch PCs.
( temperature, humidity, CO2, lux, occupancy... ) Manager. Conveying equipment models and error Up to 10 e-mail addresses
codes, these e-mail alerts enable recipients to can be registered.
Pump Fan Keycard switch Sensor take prompt action and can be set for specific
equipment.

A wideservice
Effective varietyfunctions
of equipment can
offered be con
to tenants
Smart phone will be a remote controller of VRV system (Option)
Users can operate and For buildings VRV Smart phone Remote Controller To be released in April 2016 For house VRV Smart phone Control System
check the status of VRV Indoor unit VRV Indoor unit
Up to 512 indoor units can be controlled. Up to 64 indoor units can be controlled.
VRV system from their smart
phones via Wi-Fi. Just add SVMPRC2 to Just add SVMPR1 to
It is not necessary to move this system this system
where a remote controller is
located with this feature.
VRV system in other rooms SVMPR1
SVMPRC2 VRV VRV
can be operated, and their Outdoor unit Outdoor unit
status can be checked. It is
LAN cable LAN cable
also possible to check if air
conditioners in other rooms You can control
remain switched on etc., You can control VRV system from Monitor Control
VRV system from anywhere in your house
helping achieve energy anywhere through Wi-Fi
Wi-Fi router Wi-Fi router Smart phone through Wi-Fi
saving. Smart phone

7 8
 Energy Management ( Energy Navigator Option ) Tenant Management ( PPD * Option )

Motivating for further energy saving Reporting the power consumption of VRV system for each tenant
Energy saving assisted by Energy Navigator (Option) With the PPD function, power consumption can be calculated for each indoor unit (Option)
Energy consumption trends of all the equipment The energy consumption is
(including air conditioning units) can be easily proportionally calculated for each indoor
understood by using the Energy Navigator unit. The data can be used for energy
Operational information
feature. management and calculation of air of individual indoor units
Here users can identify air conditioning units that conditioning usage fees for respective Tenant A
tenants. HIGH
are suspected of overcooling or kept running in Operation duration
unoccupied rooms. Room temperature
Operational information of individual Expansion valve
The Energy Navigator feature will also provide indoor units are monitored, based on opening ratio
support in formulation and verification of distribution of power consumption of Tenant B
energy-saving measures to help ensure kWh meter LOW
outdoor units.
advanced energy management. Automatic calculation of
Daikin’ s PPD keeps track of power

et m
total power consumption of

m fro
Hourly energy consumption is

er
kWh meter distribution for each indoor unit. It individual indoor units

l
na
performs air conditioning billing

ig
measured and the intelligent Touch

th se s
h
Tenant C

kW
calculations quickly and automatically.
Manager records data sent from the

l
Pu
iTM plus adaptor

e
Power
Supply (Up to 7) MEDIUM Tenant B
electrical meter. kWh meter Lighting kWh meter Tenant A Tenant C
It is easy to output PPD data.
PPD data is output in CSV format to
a PC or USB memory device and
Energy consumption data is presented on a daily and monthly basis. Also, energy targets and can be freely processed and kWh meter Total power consumption
Accumulated data appears
projected energy consumption data as well as comparison data with the previous year’s actual managed.
in an easy-to-understand graph.
results are presented in a user-friendly format to help ensure energy-saving control.

Daily energy consumption Monthly energy consumption Comparison from the previous year

Air conditioning bills can be issued by one click To be released in April 2016

Electricity bills can be easily calculated for each tenant (Option)

The power consumption of VRV controlled
by the intelligent Touch Manager can be
easily managed for each tenant using a Internet / Ethernet
Warning indication Current month’s target Warning indication Current year’s target Current year’s Previous year’s PC. The electricity bill settings facilitate
Actual daily energy Prediction line Actual monthly energy consumption Prediction line energy use
Current year’s
cumulate line
Previous year’s
billing work through easy calculation and
consumption Daily average to achieve Monthly target energy consumption Monthly target to achieve
cumulate line energy use issuance of VRV electricity bills. HBU
Cumulate line month’s target Cumulate line year’s target

SVMPS1
User’s PC
Information concerning energy
management of the system can be
viewed on the user’s own PC via LAN. User’s PC
LAN

Invoice

The degree of rule Invoice

Invoice
Energy consumption is automatically deviation increases
evaluated for each room. toward the upper right
area of the graph.
Based on the accumulated data, the
intelligent Touch Manager automatically
identifies rooms and air conditioning units
that substantially deviate from operation
[ Main functions ]
rules established by the user for operation • Register tenants
time and predetermined temperature • Set the electricity unit price for 5 time zones
settings. A benchmark showing ways to • Calculate power consumption
further reduce energy consumption can Plot area Room name and electricity charge for each tenant
Number of hours of rule deviation
be displayed to alert users to even greater Number of days of rule deviation
Number of hours and days of rule deviation
• Show aggregation results in the specified
Extra energy consumption
energy and cost savings. period for each tenant
• Output the results (Printout and CSV file) Tenant registration screen Setup screen VRV electricity
bill screen

9 10
 Energy Management ( Energy Navigator Option ) Tenant Management ( PPD * Option )

Motivating for further energy saving Reporting the power consumption of VRV system for each tenant
Energy saving assisted by Energy Navigator (Option) With the PPD function, power consumption can be calculated for each indoor unit (Option)
Energy consumption trends of all the equipment The energy consumption is
(including air conditioning units) can be easily proportionally calculated for each indoor
understood by using the Energy Navigator unit. The data can be used for energy
Operational information
feature. management and calculation of air of individual indoor units
Here users can identify air conditioning units that conditioning usage fees for respective Tenant A
tenants. HIGH
are suspected of overcooling or kept running in Operation duration
unoccupied rooms. Room temperature
Operational information of individual Expansion valve
The Energy Navigator feature will also provide indoor units are monitored, based on opening ratio
support in formulation and verification of distribution of power consumption of Tenant B
energy-saving measures to help ensure kWh meter LOW
outdoor units.
advanced energy management. Automatic calculation of
Daikin’ s PPD keeps track of power

et m
total power consumption of

m fro
Hourly energy consumption is

er
kWh meter distribution for each indoor unit. It individual indoor units

l
na
performs air conditioning billing

ig
measured and the intelligent Touch

th se s
h
Tenant C

kW
calculations quickly and automatically.
Manager records data sent from the

l
Pu
iTM plus adaptor

e
Power
Supply (Up to 7) MEDIUM Tenant B
electrical meter. kWh meter Lighting kWh meter Tenant A Tenant C
It is easy to output PPD data.
PPD data is output in CSV format to
a PC or USB memory device and
Energy consumption data is presented on a daily and monthly basis. Also, energy targets and can be freely processed and kWh meter Total power consumption
Accumulated data appears
projected energy consumption data as well as comparison data with the previous year’s actual managed.
in an easy-to-understand graph.
results are presented in a user-friendly format to help ensure energy-saving control.

Daily energy consumption Monthly energy consumption Comparison from the previous year

Air conditioning bills can be issued by one click To be released in April 2016

Electricity bills can be easily calculated for each tenant (Option)

The power consumption of VRV controlled
by the intelligent Touch Manager can be
easily managed for each tenant using a Internet / Ethernet
Warning indication Current month’s target Warning indication Current year’s target Current year’s Previous year’s PC. The electricity bill settings facilitate
Actual daily energy Prediction line Actual monthly energy consumption Prediction line energy use
Current year’s
cumulate line
Previous year’s
billing work through easy calculation and
consumption Daily average to achieve Monthly target energy consumption Monthly target to achieve
cumulate line energy use issuance of VRV electricity bills. HBU
Cumulate line month’s target Cumulate line year’s target

SVMPS1
User’s PC
Information concerning energy
management of the system can be
viewed on the user’s own PC via LAN. User’s PC
LAN

Invoice

The degree of rule Invoice

Invoice
Energy consumption is automatically deviation increases
evaluated for each room. toward the upper right
area of the graph.
Based on the accumulated data, the
intelligent Touch Manager automatically
identifies rooms and air conditioning units
that substantially deviate from operation
[ Main functions ]
rules established by the user for operation • Register tenants
time and predetermined temperature • Set the electricity unit price for 5 time zones
settings. A benchmark showing ways to • Calculate power consumption
further reduce energy consumption can Plot area Room name and electricity charge for each tenant
Number of hours of rule deviation
be displayed to alert users to even greater Number of days of rule deviation
Number of hours and days of rule deviation
• Show aggregation results in the specified
Extra energy consumption
energy and cost savings. period for each tenant
• Output the results (Printout and CSV file) Tenant registration screen Setup screen VRV electricity
bill screen

9 10
 S p e ci fica ti o n s S y st em st r u c t u r e

intelligent Touch Manager function intelligent Touch Manager System Overview

Category Function Remarks
iTM plus adaptor (DCM601A52) Maximum number of adaptors: 7 Up to 512 groups
(1024 indoor units)
Management points Maximum number of management points: 650
(Number of D connection management points: 512)
Areas Maximum number of areas: 650
Air Conditioning Up to 650
Network Service System
Maximum area hierarchies: 10 management points
Basic functions Supported languages English, French, German, Italian, Spanish, Portuguese, Dutch, Chinese, and Japanese
Monitoring screens Icon view Icons show the operation status of equipment.
List view Detailed information of each management point is displayed.
Layout view Up to 60 screens can be created. (Engineering option) One D -NET system
Max. 64 indoor unit groups (128 indoor units)
History Up to 500,000 events are recorded in history including malfunctions, operations, iTM Plus Adaptor
100Mbps Max. 64 indoor unit groups
automatic control, and system information. Ethernet
Operation origin is also recorded.
Schedule Number of programmes: 100
Up to 20 actions/day can be set. USB 2.0 Di/Pi port
Flash drive
Weekly schedule 7 days of the week + 5 special days can be set. Max. 64 indoor unit groups
Di/Pi Line
Yearly calendar Special days can be specified by date or month/week/day of the week.
Special day settings can be reused every year. Web Access
via Internet
Seasonal schedule Programmes for respective seasons can be switched by date.
Interlock Number of programmes: 500 Max. 64 indoor unit groups
KRP928BB2S
Interlock is possible for on/off, malfunction, analogue value,
and operation mode switching.
Web Access
Emergency stop Number of programmes: 31 via LAN Up to 7 Adaptors
Automatic control Automatic changeover Number of changeover groups: 512
Temperature limit Number of temperature limit groups: 8 Fire alarm kWh meter WAGO I/O up to 30 nodes Residential A/C

Upper limit range: 32-50°C

Lower limit range: 2-16°C
Sliding temperature Number of sliding temperature groups: 8
Outdoor temperature range: 18-34°C BACnet / IP
Setpoint range: 16-32°C
Heating Mode Optimisation (HMO) Unneeded heating is prevented.
Timer extension Operation stop is selectable from 30, 60, 90, 120, 150, and 180 minutes. Air Handling Unit Pump Fan Sensor Keycard switch
3rd party
Setback Setback setpoint can be set for 2 patterns. BACnet controller
Temperature range: 1-7°C , −1-−7°C (setpoint shift amount)

Power Proportional Distribution Hourly Power Proportional Distribution results up to 13 months are recorded. WAGO I/O system
The system supports data output in CSV format.
BACnet controller DALI module
750-831 753-647
Data control Energy Navigator Actual results of daily/monthly energy consumption are shown in graphs.
Comparisons can be made with predetermined values/actual results of the previous
year.
Inefficient operation of VRV indoor units is automatically identified, and energy
waste is calculated.

Web access Web browsers can display the same type of screen as the intelligent Touch Manager. DALI BUS
Up to 4 administrators and 60 general users can be registered.
Screens and operation accessible to general users can be restricted. Operation from
DALI LED driver
Remote access a smart phone
Sensor
E-mail alerts Up to 10 e-mail addresses can be set. (occupancy / illuminance)
LED light
Addresses for sending malfunction alerts can be set by range of management points.
The SMTP server authentication method is selectable from no authentication, SVMPC2: DALI BUS
POP before SMTP, and SMTP-AUTH. Smart phone for controlling 512 units
SVMPR2:
Automatic registration Indoor units connected to D -NET are automatically detected, Wi-Fi router for controlling 64 units DALI LED driver
and icons for respective models are automatically registered. Sensor
LED light (occupancy / illuminance)
System Security Screen lock functions are available. Tenant control
Access restrictions can be set for each general user.
Screen savers are selectable from 3 patterns. DALI BUS
Screen savers
Setting of contact information Contact information for servicing can be registered.
Air Conditioning Network Service System A service agreement needs to be concluded. DALI LED driver
Air Conditioning Web Access SVMPS1 Sensor
Energy Saving Air Conditioning Network via LAN LED light (occupancy / illuminance)
Network Service A service agreement needs to be concluded.
Service System

11 12
 S p e ci fica ti o n s S y st em st r u c t u r e

intelligent Touch Manager function intelligent Touch Manager System Overview

Category Function Remarks
iTM plus adaptor (DCM601A52) Maximum number of adaptors: 7 Up to 512 groups
(1024 indoor units)
Management points Maximum number of management points: 650
(Number of D connection management points: 512)
Areas Maximum number of areas: 650
Air Conditioning Up to 650
Network Service System
Maximum area hierarchies: 10 management points
Basic functions Supported languages English, French, German, Italian, Spanish, Portuguese, Dutch, Chinese, and Japanese
Monitoring screens Icon view Icons show the operation status of equipment.
List view Detailed information of each management point is displayed.
Layout view Up to 60 screens can be created. (Engineering option) One D -NET system
Max. 64 indoor unit groups (128 indoor units)
History Up to 500,000 events are recorded in history including malfunctions, operations, iTM Plus Adaptor
100Mbps Max. 64 indoor unit groups
automatic control, and system information. Ethernet
Operation origin is also recorded.
Schedule Number of programmes: 100
Up to 20 actions/day can be set. USB 2.0 Di/Pi port
Flash drive
Weekly schedule 7 days of the week + 5 special days can be set. Max. 64 indoor unit groups
Di/Pi Line
Yearly calendar Special days can be specified by date or month/week/day of the week.
Special day settings can be reused every year. Web Access
via Internet
Seasonal schedule Programmes for respective seasons can be switched by date.
Interlock Number of programmes: 500 Max. 64 indoor unit groups
KRP928BB2S
Interlock is possible for on/off, malfunction, analogue value,
and operation mode switching.
Web Access
Emergency stop Number of programmes: 31 via LAN Up to 7 Adaptors
Automatic control Automatic changeover Number of changeover groups: 512
Temperature limit Number of temperature limit groups: 8 Fire alarm kWh meter WAGO I/O up to 30 nodes Residential A/C

Upper limit range: 32-50°C

Lower limit range: 2-16°C
Sliding temperature Number of sliding temperature groups: 8
Outdoor temperature range: 18-34°C BACnet / IP
Setpoint range: 16-32°C
Heating Mode Optimisation (HMO) Unneeded heating is prevented.
Timer extension Operation stop is selectable from 30, 60, 90, 120, 150, and 180 minutes. Air Handling Unit Pump Fan Sensor Keycard switch
3rd party
Setback Setback setpoint can be set for 2 patterns. BACnet controller
Temperature range: 1-7°C , −1-−7°C (setpoint shift amount)

Power Proportional Distribution Hourly Power Proportional Distribution results up to 13 months are recorded. WAGO I/O system
The system supports data output in CSV format.
BACnet controller DALI module
750-831 753-647
Data control Energy Navigator Actual results of daily/monthly energy consumption are shown in graphs.
Comparisons can be made with predetermined values/actual results of the previous
year.
Inefficient operation of VRV indoor units is automatically identified, and energy
waste is calculated.

Web access Web browsers can display the same type of screen as the intelligent Touch Manager. DALI BUS
Up to 4 administrators and 60 general users can be registered.
Screens and operation accessible to general users can be restricted. Operation from
DALI LED driver
Remote access a smart phone
Sensor
E-mail alerts Up to 10 e-mail addresses can be set. (occupancy / illuminance)
LED light
Addresses for sending malfunction alerts can be set by range of management points.
The SMTP server authentication method is selectable from no authentication, SVMPC2: DALI BUS
POP before SMTP, and SMTP-AUTH. Smart phone for controlling 512 units
SVMPR2:
Automatic registration Indoor units connected to D -NET are automatically detected, Wi-Fi router for controlling 64 units DALI LED driver
and icons for respective models are automatically registered. Sensor
LED light (occupancy / illuminance)
System Security Screen lock functions are available. Tenant control
Access restrictions can be set for each general user.
Screen savers are selectable from 3 patterns. DALI BUS
Screen savers
Setting of contact information Contact information for servicing can be registered.
Air Conditioning Network Service System A service agreement needs to be concluded. DALI LED driver
Air Conditioning Web Access SVMPS1 Sensor
Energy Saving Air Conditioning Network via LAN LED light (occupancy / illuminance)
Network Service A service agreement needs to be concluded.
Service System

11 12
 S p e ci fica ti o n s M ai n sp ec i f i c a t i on s

Types of management points and target equipment/interface intelligent Touch Manager

Management point Supported equipment Number of management points Port Number Use POWER SUPPLY : DCM601A51 AC100-240V(±10%)(50/60Hz)
INPUT : 23W
D -compatible indoor units
D 1ch D -NET (Up to 64 groups) MASS : 2.4kg
AHU kit (EKEQFCB,EKEQDCB,EKEQMCB) FUSE AMP : 3.15A
Indoor Interface adaptor for SkyAir (DTA102A52 , DTA112BA51) Maximum: 512 *1 LAN 1ch Web Access (100BASE-TX ) Operating temperature limit : -0 - +40
Interface adaptor for residential indoor unit (KRP928BB2S) Operating humidity limit : MAX.15 - 85
RS485 1ch Storage temperature range : -15 - +60
Central control adaptor kit for package A/C (DTA107A55) External I/O module (Di,Dio,Ai,Ao,Pi)
Installation direction : Vertical direction only
Outdoor VRV outdoor units Maximum: 80
Emergency stop input (Di1)
Di(Pi) 4ch
Ventilator Heat Reclaim Ventilator Maximum: 512 *1 Pulse input,contact signal input
D3 Chiller D -compatible air-cooled chillers (UWA/Y) / water-cooled chillers (ZUW) Maximum: 320 *2
plus ADP IF 1ch iTM plus adaptor (Up to 7 adaptors)
Di port of intelligent Touch Manager
Di Maximum: 32 *3
Di port of iTM plus adaptor internal 1ch Air Conditioning Network
modem (option) Service System
D3 Di D Di Unit (DEC101A51) Maximum: 512 *1
External Di WAGO Di Maximum: 512 *4
D Dio Unit (DEC102A51) Maximum: 512 *1
D3 Dio
General-purpose adaptor (DTA103A51)
Maximum: 512 *4
External Dio WAGO Di, Do
Pi port of intelligent Touch Manager
Pi Maximum: 32 *3
Pi port of iTM plus adaptor
Internal Pi Energy consumption of VRV outdoor units Maximum: 80
External Pi WAGO Pi (Not available for PPD function)
External Ao WAGO Ao Maximum: 512 *4
External Ai WAGO Ai
Outdoor temp of Outdoor unit
Internal Ai Room temperature, setpoint of indoor units Maximum: 512 *4
D3 Chiller outleta/inlet water temperatures
BACnet Di BACnet object BI/BO/BV can be linked
BACnet Dio BACnet object BI/BO/BV can be linked
Maximum: 512 *5
BACnet Ai BACnet object AI/AO/AV can be linked
BACnet Ao BACnet obejct AO/AV can be linked
AHU *6 BACnet connectable AHU using MicroTech Maximum: 20
*1: Total of D connection equipment (Indoor, Ventilator, D3 Chiller, D3 Di, D3 Dio) *2: Maximum number of management points for D3 Chiller only
*3: Total of Di/Pi management points *4: Total of External Di, External Dio, External Ai, External Ao, External Pi and Internal Ai *5: Total of BACnet points (include AHU*6) *6: AHU count as 20 BACnet points

DAIKIN supplied equipment & Software option

Model Item
DCM601A51 intelligent Touch Manager
DCM601A52 iTM plus adaptor (Option)
DCM002A51 iTM power proportional distribution software (Option)
iTM plus adaptor (DCM601A52) Input / Output port
DCM007A51 HTTP interface software (Option) Port Number Use POWER SUPPLY : DCM601A52 AC100V-240V(±10%)(50/60Hz)
DCM008A51 iTM energy navigator software (Option) INPUT : 6W
plus ADP IF 1ch iTM plus adaptor (Up to 7 adaptors) MASS : 0.5kg
DCM009A51 BACnet client software (Option)
FUSE AMP : 3.15A
Di module (DC24V/4.5mA) : 750-400,750-432 Thermistor module (Pt 1000/RTD) : 750-461/000-003,750-460/000-003 D 1ch D -NET (Up to 64 groups) Operating temperature limit : -10 - +50
Di module (DC24V/2.8mA) : 750-430 Thermistor module (Ni 100/RTD) : 750-461/000-004 Operating humidity limit : MAX.15 - 85
Do module (AC230V/DC30V 2A) : 750-513/000-001 Thermistor module (Ni 1000 TK6180/RTD) : 750-461/000-005,750-460/000-005 Di(Pi) 4ch Pulse input,contact signal input Storage temperature range : -15 - +60
Do module (DC24V 0.5A) : 750-504 Pi module : 750-638 Installation direction : Vertical direction only
Ai module (4 20mA 12bit) : 750-454,750-455 DC24V Power supply unit : 787-712
Ai module (-10 10V 13bit) : 750-479 Modbus Communication unit : 750-315/000-002/K190-6442 (DAIKIN custom)
WAGO I/O system Ai module (0 10V 12bit) : 750-459 Terminator module : 750-600
Ao module (4 20mA 12bit) : 750-554,750-555 Power module : 750-613
Ao module (0 10V 10bit) : 750-560 Connector : 750-960
Ao module (0 10V 12bit) : 750-559 BACnet DALI module
Thermistor module (NTC20K) : 750-461/020-000 WAGO BACnet controller module : 750-831
Thermistor module (Pt 100/RTD) : 750-461/750-460 WAGO DALI master module : 753-647
WAGO DALI DC power supply module : 753-620

Locally supplied equipment SVM Series Model

Item Specification Model Comment
USB 2.0 SVMPR2 VRV Smart phone Control System for residence
USB memory
Up to 32GB memory can use
Web browser : Internet Explorer 11 Firefox 26.0 SVMPC2 VRV Smart phone Remote Controller for building
PC for Web access Chrome 32.0
Flash Player Ver11.9.900.170 SVMPS1 Tenant Billing System with PPD

13 14
 S p e ci fica ti o n s M ai n sp ec i f i c a t i on s

Types of management points and target equipment/interface intelligent Touch Manager

Management point Supported equipment Number of management points Port Number Use POWER SUPPLY : DCM601A51 AC100-240V(±10%)(50/60Hz)
INPUT : 23W
D -compatible indoor units
D 1ch D -NET (Up to 64 groups) MASS : 2.4kg
AHU kit (EKEQFCB,EKEQDCB,EKEQMCB) FUSE AMP : 3.15A
Indoor Interface adaptor for SkyAir (DTA102A52 , DTA112BA51) Maximum: 512 *1 LAN 1ch Web Access (100BASE-TX ) Operating temperature limit : -0 - +40
Interface adaptor for residential indoor unit (KRP928BB2S) Operating humidity limit : MAX.15 - 85
RS485 1ch Storage temperature range : -15 - +60
Central control adaptor kit for package A/C (DTA107A55) External I/O module (Di,Dio,Ai,Ao,Pi)
Installation direction : Vertical direction only
Outdoor VRV outdoor units Maximum: 80
Emergency stop input (Di1)
Di(Pi) 4ch
Ventilator Heat Reclaim Ventilator Maximum: 512 *1 Pulse input,contact signal input
D3 Chiller D -compatible air-cooled chillers (UWA/Y) / water-cooled chillers (ZUW) Maximum: 320 *2
plus ADP IF 1ch iTM plus adaptor (Up to 7 adaptors)
Di port of intelligent Touch Manager
Di Maximum: 32 *3
Di port of iTM plus adaptor internal 1ch Air Conditioning Network
modem (option) Service System
D3 Di D Di Unit (DEC101A51) Maximum: 512 *1
External Di WAGO Di Maximum: 512 *4
D Dio Unit (DEC102A51) Maximum: 512 *1
D3 Dio
General-purpose adaptor (DTA103A51)
Maximum: 512 *4
External Dio WAGO Di, Do
Pi port of intelligent Touch Manager
Pi Maximum: 32 *3
Pi port of iTM plus adaptor
Internal Pi Energy consumption of VRV outdoor units Maximum: 80
External Pi WAGO Pi (Not available for PPD function)
External Ao WAGO Ao Maximum: 512 *4
External Ai WAGO Ai
Outdoor temp of Outdoor unit
Internal Ai Room temperature, setpoint of indoor units Maximum: 512 *4
D3 Chiller outleta/inlet water temperatures
BACnet Di BACnet object BI/BO/BV can be linked
BACnet Dio BACnet object BI/BO/BV can be linked
Maximum: 512 *5
BACnet Ai BACnet object AI/AO/AV can be linked
BACnet Ao BACnet obejct AO/AV can be linked
AHU *6 BACnet connectable AHU using MicroTech Maximum: 20
*1: Total of D connection equipment (Indoor, Ventilator, D3 Chiller, D3 Di, D3 Dio) *2: Maximum number of management points for D3 Chiller only
*3: Total of Di/Pi management points *4: Total of External Di, External Dio, External Ai, External Ao, External Pi and Internal Ai *5: Total of BACnet points (include AHU*6) *6: AHU count as 20 BACnet points

DAIKIN supplied equipment & Software option

Model Item
DCM601A51 intelligent Touch Manager
DCM601A52 iTM plus adaptor (Option)
DCM002A51 iTM power proportional distribution software (Option)
iTM plus adaptor (DCM601A52) Input / Output port
DCM007A51 HTTP interface software (Option) Port Number Use POWER SUPPLY : DCM601A52 AC100V-240V(±10%)(50/60Hz)
DCM008A51 iTM energy navigator software (Option) INPUT : 6W
plus ADP IF 1ch iTM plus adaptor (Up to 7 adaptors) MASS : 0.5kg
DCM009A51 BACnet client software (Option)
FUSE AMP : 3.15A
Di module (DC24V/4.5mA) : 750-400,750-432 Thermistor module (Pt 1000/RTD) : 750-461/000-003,750-460/000-003 D 1ch D -NET (Up to 64 groups) Operating temperature limit : -10 - +50
Di module (DC24V/2.8mA) : 750-430 Thermistor module (Ni 100/RTD) : 750-461/000-004 Operating humidity limit : MAX.15 - 85
Do module (AC230V/DC30V 2A) : 750-513/000-001 Thermistor module (Ni 1000 TK6180/RTD) : 750-461/000-005,750-460/000-005 Di(Pi) 4ch Pulse input,contact signal input Storage temperature range : -15 - +60
Do module (DC24V 0.5A) : 750-504 Pi module : 750-638 Installation direction : Vertical direction only
Ai module (4 20mA 12bit) : 750-454,750-455 DC24V Power supply unit : 787-712
Ai module (-10 10V 13bit) : 750-479 Modbus Communication unit : 750-315/000-002/K190-6442 (DAIKIN custom)
WAGO I/O system Ai module (0 10V 12bit) : 750-459 Terminator module : 750-600
Ao module (4 20mA 12bit) : 750-554,750-555 Power module : 750-613
Ao module (0 10V 10bit) : 750-560 Connector : 750-960
Ao module (0 10V 12bit) : 750-559 BACnet DALI module
Thermistor module (NTC20K) : 750-461/020-000 WAGO BACnet controller module : 750-831
Thermistor module (Pt 100/RTD) : 750-461/750-460 WAGO DALI master module : 753-647
WAGO DALI DC power supply module : 753-620

Locally supplied equipment SVM Series Model

Item Specification Model Comment
USB 2.0 SVMPR2 VRV Smart phone Control System for residence
USB memory
Up to 32GB memory can use
Web browser : Internet Explorer 11 Firefox 26.0 SVMPC2 VRV Smart phone Remote Controller for building
PC for Web access Chrome 32.0
Flash Player Ver11.9.900.170 SVMPS1 Tenant Billing System with PPD

13 14
 Air Conditioning Network Service System PCNGO1214B
Preventive Maintenance
The intelligent Touch Manager can be connected to Daikin’ s own Air Conditioning Network Service System
for remote monitoring and verification of operation status for VRV system. By its ability to predict
malfunctions, this service provides customers with additional peace of mind.

Enhanced convenience with link to the Air Conditioning Network Service System
The intelligent Touch Manager connects seamlessly to Daikin’s 24-hour Air Conditioning Network Service System.

ACC centre
Personnel at the centre monitor the
occurrence of malfunctions and track
Trouble their cause via the Internet.
Advance malfunction warnings help
prevent the sudden occurrence of
problems later.
Even malfunctions difficult to identify Air Conditioning Network Service System*
can be monitored remotely.
Repair *Because of restrictions
Allows dispatching of Enable prompt repairs as service engineers
in applicable areas and
service engineers without know the cause of the problem beforehand.
release times, please consult
a Daikin representative
a call from customers. separately for details.

One touch selection to total air comfort

Daikin Offers a Variety of Control Systems

Convenient controllers that offer more freedom to administrators

Ease of use and expanded control functions

The user-friendly controller features colours, multilingual function, and icons in the display for ease of
understanding. A wide variety of control methods can be accommodated, permitting administrators to
monitor and operate the system even when they are away from the controller.
DCS601C51

Connect VRV system to your BMS via BACnet or LONWORKS

® ®

Compatible with BACnet® and

LONWORKS®, the two leading open
BACnet® LonWORKS®
network comunication protocols, Daikin Seamless connection Facilitating the network
offers interfaces that provide a seamless between VRV system integration of
connection between VRV system and and BACnet® open VRV system
your BMS. network protocol. and LONWORKS®
DMS502B51 DMS504B51
Dedicated interfaces make (Interface for use in BACnet® ) (Interface for use in LONWORKS® )
Daikin air conditioners freely Notes: 1.BACnet®is a registered trademark of American Society of Heating , Refrigerating and
compatible with open networks Air-Conditioning Engineers(ASHRAE).
2.LONWORKS® is a trademark of Echelon Corporation registered in the United States and other countries.

Using intelligent Touch Manager

1. A Daikin-trained engineer must perform installation of the intelligent Touch Manager.
2. The clock of the intelligent Touch Manager should be adjusted once a month.
3. Daikin’s unique PPD system calculates the energy consumption of each indoor unit based on its operation data output. Note that PPD is not a “meter”
adapted to the methods of measuring electrical power consumption in each country. Tenant billing systems differ by country according to each country’s
respective legal system. Data obtained by PPD is for reference use only and should not be used for official financial transactions.

Specifications, designs and other content appearing in this brochure are current as of December 2015 but subject to change without notice.
12/15 AD ALL IN ONE
System solution for management of building air conditioning