Tersus MVP Datasheet

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

TERSUS

MetaVerse Painter
Mobile Mapping System
Tersus MetaVerse Painter
Tersus MetaVerse Painter (MVP for short) is a mobile mapping system that can rapidly capture rich geospatial data
while mounted on mobile platforms. As a cost-effective and high-precision mobile mapping application, it utilizes
the high-performance GNSS-aided inertial navigation system (INS) and Tersus's patented single/dual antenna
GNSS receiver and supports RTK/PPK processing. MVP can be used with commercially available LiDARs in the
market, such as Hesai, LIVOX, Velodyne, Quanergy, Ouster and RIEGL.

Hesai LiDAR

Livox LiDAR

Velodyne LiDAR

Quanergy LiDAR

Ouster LiDAR

and more��

MVP is a complete mobile mapping solution provided by Tersus, including LiDAR, industrial-grade camera,
mounting brackets, vibration isolator and other optional equipment, as well as LiDAR Calibration, Bore-sighting,
data-logging software and Tersus Engine-supported automatic Post-Processing (PPK) and Point Cloud Processing
software.

With vast high-precision �D spatial data, high-density point cloud data and high-resolution panoramic image
data, MVP can be widely used for terrain mapping, mine and water conservancy surveying and maintenance,
agricultural and forestry surveying, power line inspection, and disaster emergency response, as well as smart city,
BIM modelling, urban streetscape, transportation infrastructure surveying, etc.

Features
Advanced GNSS RTK system and built-in Low power consumption
IMU supported
Single / Dual antenna(s) supported
Multi-source data automatic alignment &
fusion Multiple payloads, Drone, Vehicle supported

5mm (PPK), 10mm (RTK) position accuracy RGB camera / Thermal camera / DJI Skyport
and more optional accessories (direct
3-5cm point cloud precision connection interface reserved)
Lightweight (0.37kg without LiDAR) Powerful one-click processing software
Light in weight, Ready to use,
contributes to longer free of additional
running hours operations
MVP is designed compactly, weight only �.��kg MVP provides an out-of-box experience and can be
(without LiDAR). The smaller size and lighter weight used immediately once mounted to the payload.
enable a lower consumption of the drones, leading All the calibration and bore-sighting procedures
to a longer working time. have been completed before shipping.

Integrated design, Wide field of view,


applicable to broad coverage of
multi-platforms working area
MVP comes with a DJI Skyport AGL up to ���m, with ���°horizontal
interface and perfectly matches and ��°vertical FOV, MVP is suitable
various drones. Reserved for scanning large scenes.
dual-antenna interface allows
(Based on Hesai Pandar XT-��)
applications for vehicles and
other payloads.

Precise point cloud, Streamlined workflow,


benefited from auto-generation of
multi-source data analysis high-density point clouds
Data collected from multiple sensors Import the data file into the post-processing
(GNSS+INS+LiDAR+CAMERA) can be consolidated as software, and a high-dense point cloud with an
one .data file. Tersus’s patented PPK/RTK algorithm accuracy of �-�cm can be generated immediately
ensures a high-accurate coordinate data output. with a simple click.

Supported Drones
Compatible with popular drone models
DJI M300 DJI M210 DJI M600
Technical Specifications

MetaVerse Painter
System Platform Field of View (Horizontal) 360° Point Cloud Precision 3-5cm (depend on
Weight �.��kg (without LiDAR) Horizontal Resolution 0.09° (5Hz) LiDAR, taken on the same target @ 50m AGL)
�.��kg (with Hesai Pandar XT-��) 0.18° (10Hz) GNSS / IMU Performance
Power Supply / Voltage DC � ~ �� V 0.36° (20Hz) Positioning Accuracy (RMS) 0.5cm+1ppm (PPK)
Power Consumption ��W (without LiDAR) Field of View (Vertical) 31° (-16° ~ +15°) 1cm+1ppm (RTK)
��W (with Hesai Pandar XT-��) Vertical Resolution 1° GNSS data rate Up to 100Hz
Operating Temperature -��℃ ~ +��℃ Frame Rate 5Hz, 10Hz, 20Hz IMU data rate Up to 2000Hz
Storage Temperature -��℃ ~ +��℃ Returns supported Dual Returns Roll & Pitch Accuracy <0.01° Pitch & Roll
Dust- & Waterproof IP�� Single Return (Last, Strongest, First) Heading Accuracy <0.05° Heading
Data Storage Up to �TB Max. Effective Measurement Rate Optional Accessories
Scanner Performance (Based on Hesai Pandar XT-��) 640,000 pts/ sec (single return) Camera RGB Camera
Laser Class Class � Eye Safe 1,280,000 pts/ sec (dual returns) Thermal Camera
Wavelength ���nm LiDAR Accuracy/ Precision 10mm / 5mm DJI Skyport Adapter
Operating Principle TOF LiDAR supported Hesai/ VELODYNE VLP / Vibration Isolator
Measurement Range �.�� to ���m QUANERGY / RIEGL / OUSTER / Livox Antenna Mounts (Single/Dual Antenna(s) Stand)

Tersus GNSS Inc.


Right to the point.
Tersus GNSS is a leading Global Navigation Satellite System (GNSS) solution provider. Our offerings and
services aim to make centimeter-precision positioning affordable for large-scale deployment.
Founded in ����, we have been pioneers in design and development GNSS RTK products to better
cater to the industry’s needs. Our portfolios cover GNSS RTK & PPK OEM boards, David GNSS Receiver,
Oscar GNSS Receiver and inertial navigation systems.
Designed for ease of use, our solutions support multi-GNSS and provide flexible interfaces for a variety
of applications, such as UAVs, surveying, mapping, precision agriculture, lane-level navigation,
construction engineering, and deformation monitoring.

Descrip�ons, specifica�ons and related To learn more, please visit: www.tersus-gnss.com


materials are subject to change. Sales inquiry: [email protected]
©2022 Tersus GNSS Inc. All rights reserved. Technical support: [email protected]

You might also like