Scribd
Upload
88 views1 page

Pessing Libya INC: Fill: SMAW Sfa. No: 5.28&5.5 Post Weld Heat Treatment: 620-650 Deg C

This welding procedure specification outlines the requirements for welding carbon steel pipes of various thicknesses using gas tungsten arc welding and shielded metal arc welding. The document specifies the base and filler metals, welding positions, electrode sizes, shielding gases, welding parameters, preheat and post weld heat treatment temperatures, and non-destructive testing methods including visual, magnetic particle, dye penetrant, radiographic, and ultrasonic inspection. The welding will be performed in accordance with ANSI B31.3 and is intended for a project in Tobruk, Libya.

Uploaded by

Mahmoud Haggag
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
88 views1 page

Pessing Libya INC: Fill: SMAW Sfa. No: 5.28&5.5 Post Weld Heat Treatment: 620-650 Deg C

This welding procedure specification outlines the requirements for welding carbon steel pipes of various thicknesses using gas tungsten arc welding and shielded metal arc welding. The document specifies the base and filler metals, welding positions, electrode sizes, shielding gases, welding parameters, preheat and post weld heat treatment temperatures, and non-destructive testing methods including visual, magnetic particle, dye penetrant, radiographic, and ultrasonic inspection. The welding will be performed in accordance with ANSI B31.3 and is intended for a project in Tobruk, Libya.

Uploaded by

Mahmoud Haggag
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

PESSING LIBYA INC WELDING PROCEDURE

CONSTRUCTION & ENGINEERING SERVICES SPECIFICATION

Client: WABAG WPS No.: PL08/2021 Date: 21. 12. 2021


PQR No.: P L/PQR-101 Project No.: GDCOL TOBRUK - 11P89
Weld Type: BW, Single Side Welding Process: GTAW / SMAW
Base Metal Details
Base Material: carbon steel + ½ MO.Steel or Equivalent P No. 1 Gr No.1&2 TO P No.3 Gr No.1&2
Thickness (mm): 1.5 TO 18 mm Diameter: N/A
Welding Position: ALL Root: GTAW Fill: SMAW Technique: stringer/weave
Filler Metal Details
SFA. No.:
AWS No. Classification: ER70S-A1 & E7018-A1 F No.: 6 & 4 A No.: 2&2
5.28&5.5
Designation and Manufacturer: BOHLER or Equivalent Preheat Temperature: 150 deg c
Size of electrode: 2.4 & (2.5,3.25) mm Post Weld heat treatment: 620-650 deg c
Flux: N/A Method of prepare edges: Grinding
Shielding gas/ Backing gas: Ar Flow Rate :6-12 Lpm Fit-Up method: Spacer
JOINT DETAIL
PREPARATION METHOD WELD DETAIL

WELDING DETAILS
Weld
Weld Filler Voltage Heat
Pass process ΦD Current (A) Polarity Speed
Layer Material (V) Input
Cm/min
1 Root GTAW ER70S-A1 mm 2.4 60-90 10-11 DCEN N/A N/A
2 Fill SMAW E7018-A1
mm 2.5,3.25 70-130 22-25 DCEP N/A N/A
Inspection Code or Standard: ANSI B31.3
Inspection Magnetic Particle or Radiographic Test or Pressure
Visual
Method Dye Penetrant Ultrasonic Test Test
Extent of UT:
100% MT: 100% PT: 100% RT: 10% YES
Examination 10%
WELDING AND POST WELDING HEATTREATMENT
Preheat Temperature: 150 deg c Thermal Design Drawing No.: N/A Post Heat Treatment:620-650 deg c
Inspection: RTG-10%
Prepared by: Eng. Mahmoud Helmy Approved by: Eng. Walid Saad Witnessed by: WABAG
AWS/CWI certification no.: (21097031) QC Head section
:Signature :Signature
Date: 21. 12. 2021 Date: 21. 12. 2021 :Date

You might also like