IIPT-MO-966-ANG19-02085

INSTALLATION INSTRUCTIONS AND IN-SPAN POSITIONING TABLES

(IIPT-MO-966-ANG19-02085 Rev. 0)

CLIENT: ELECTROMONTAJ SA

PROJECT: 400 kV OHL Tantareni-Kozlodui

prepared by

D A M P S.r.l.
Via Leonardo da Vinci 15
24060 CAROBBIO DEGLI ANGELI BG
Italy
Tel.: +39.035.959.390
Fax: +39.035.953.964
E - mail: [email protected]

00 ====== 16/01/21 P. Maffioletti P. Maffioletti 00

Client
Rev. Description Date Issued by Approved Date
Approval

1/15
 IIPT-MO-966-ANG19-02085

INDEX

• INSTALLATION INSTRUCTIONS OF TWIN SPACER DAMPER

• IN-SPAN POSITIONING TABLE DR-7035_08 Rev. 02 (from 90 to 641 m)

• INSTALLATION INSTRUCTIONS OF VIBRATION DAMPERS

• VIBRATION DAMPERS QUANTITY AND POSITIONING TABLE VDP9313_40

2/15
IITRSD
Rev.02 IIPT-MO-966-ANG19-02085
Pag. 1 of 2

INSTALLATION OF TRIPLE SPACER DAMPERS IN THE WARNING

SPANS

The spacer dampers must be installed in a position perpendicular to the THE SPACER DAMPERS MUST BE INSTALLED WITHIN 24
axis of sub-conductors, as shown in the figure below. Any deviation from HOURS FROM THE STRINGING OPERATIONS
this condition, in vertical and horizontal sense, must not be more than 3°. INSTALLATION MUST BE MADE USING A BUCKET TRUCK OR
BY PLACING PERSONNEL ON THE CONDUCTORS THROUGH
CORRECT INSTALLATION WRONG INSTALLATION !!
THE USE OF A CONDUCTOR CAR.
FOR A CORRECT AND EASIER INSTALLATION, THE WEIGHT
OF LINEMAN, CONDUCTOR CAR AND EQUIPMENT MUST BE
EQUALLY DISTRIBUTED TO ALL SUB-CONDUCTORS OF THE
PHASE.
THE LOCATION ALONG THE CONDUCTORS MUST BE IN
ACCORDANCE WITH THE RECOMMENDED POSITIONING
TABLE OF THE PROJECT.
THE CORRECT LOCATION MUST BE DETECTED BY MEANS
OF GROUND TARGETS OR CAR DISTANCE COUNTERS.
CHECK WITH ATTENTION THE CORRECT CLOSURE OF ALL
SPACER DAMPER CLAMPS.
THE PROPER INSTALLATION AND TIGHTENING OF THE
SPACER DAMPER IS SHOWN ON THE FOLLOWING PAGE.

ANY SAG ADJUSTMENT BETWEEN THE SUB-CONDUCTORS

AFTER INSTALLATION OF THE SPACER DAMPERS MUST BE
The correct orientation of the spacer damper “TOP” is marked on the main PERFORMED AFTER REMOVAL OF THE SPACER DAMPERS
frame. Adjacent units must be installed at 180° to each other as shown in FROM THE CONCERNED SPAN/SPANS.
the figure below. The orientation of any particular unit is not significant
providing that the adjacent units are installed at 180°.

3/15
IITRSD
Rev.02 IIPT-MO-966-ANG19-02085
Pag. 2 of 2

CORRECT CLAMP INSTALLATION

SIMPLE INSTALLATION CAN BE ACHIEVED AS FOLLOWS

1 2
Unscrew the clamp bolt
until the end of the bolt is
on level with the external
edge of the captive nut.
Do not unscrew the bolt
completely, to avoid
loosing it and its washers. Place the clamp body
If you loose the bolt and/or correctly on the
washers, replace them conductor.
with DAMP spare parts.
Do not replace with
similar ones.
The clamp is designed to
allow installation on the
conductor without removing
the bolt.

3 4

By hand locate the clamp

cap on the conductor and
hold both clamp
components correctly
seated on the conductor. The clamp is now
Without loosening that hold, correctly seated on the
tighten the bolt by means of conductor.
a torque wrench, to the
installation torque of
40 Nm ±10%.

4/15
 IIPT-MO-966-ANG19-02085

IMPORTANT NOTES
DAMP's system of in-span positioning shown in the following tables, has been computerized.
DAMP's computer programme is based on many correlated field test results, and analytical studies
concerning the behaviour of all currently employed, bundled conductors.

The in-span positionings tabulated are applicable to currently employed (twin, triple, quad,
hexagonal) conductor bundles in spans with standard dimensions and structural characteristics.

For special conditions, such as, extra long spans, wide river or ravine crossings, at high ground
clearance etc., employing high breaking load conductors at high tensions, a specific study/control
is essential to verify (or modify) the system in relation to the specific and special conditions.

In particular, for twin conductor bundles and/or All Aluminium Alloy conductors, the use of
additional Stockbridge type vibration dampers is necessary in almost all cases.

Damping study is usually performed by DAMP to evaluate all specific cases.

5/15
IITRSD
Rev.02 IIPT-MO-966-ANG19-02085
Pag. 1 of 2

INSTALLATION OF TRIPLE SPACER DAMPERS IN THE WARNING

SPANS

The spacer dampers must be installed in a position perpendicular to the THE SPACER DAMPERS MUST BE INSTALLED WITHIN 24
axis of sub-conductors, as shown in the figure below. Any deviation from HOURS FROM THE STRINGING OPERATIONS
this condition, in vertical and horizontal sense, must not be more than 3°. INSTALLATION MUST BE MADE USING A BUCKET TRUCK OR
BY PLACING PERSONNEL ON THE CONDUCTORS THROUGH
CORRECT INSTALLATION WRONG INSTALLATION !!
THE USE OF A CONDUCTOR CAR.
FOR A CORRECT AND EASIER INSTALLATION, THE WEIGHT
OF LINEMAN, CONDUCTOR CAR AND EQUIPMENT MUST BE
EQUALLY DISTRIBUTED TO ALL SUB-CONDUCTORS OF THE
PHASE.
THE LOCATION ALONG THE CONDUCTORS MUST BE IN
ACCORDANCE WITH THE RECOMMENDED POSITIONING
TABLE OF THE PROJECT.
THE CORRECT LOCATION MUST BE DETECTED BY MEANS
OF GROUND TARGETS OR CAR DISTANCE COUNTERS.
CHECK WITH ATTENTION THE CORRECT CLOSURE OF ALL
SPACER DAMPER CLAMPS.
THE PROPER INSTALLATION AND TIGHTENING OF THE
SPACER DAMPER IS SHOWN ON THE FOLLOWING PAGE.

ANY SAG ADJUSTMENT BETWEEN THE SUB-CONDUCTORS

AFTER INSTALLATION OF THE SPACER DAMPERS MUST BE
The correct orientation of the spacer damper “TOP” is marked on the main PERFORMED AFTER REMOVAL OF THE SPACER DAMPERS
frame. Adjacent units must be installed at 180° to each other as shown in FROM THE CONCERNED SPAN/SPANS.
the figure below. The orientation of any particular unit is not significant
providing that the adjacent units are installed at 180°.

6/15
IITRSD
Rev.02 IIPT-MO-966-ANG19-02085
Pag. 2 of 2

CORRECT CLAMP INSTALLATION

SIMPLE INSTALLATION CAN BE ACHIEVED AS FOLLOWS

1 2
Unscrew the clamp bolt
until the end of the bolt is
on level with the external
edge of the captive nut.
Do not unscrew the bolt
completely, to avoid
loosing it and its washers. Place the clamp body
If you loose the bolt and/or correctly on the
washers, replace them conductor.
with DAMP spare parts.
Do not replace with
similar ones.
The clamp is designed to
allow installation on the
conductor without removing
the bolt.

3 4

By hand locate the clamp

cap on the conductor and
hold both clamp
components correctly
seated on the conductor. The clamp is now
Without loosening that hold, correctly seated on the
tighten the bolt by means of conductor.
a torque wrench, to the
installation torque of
40 Nm ±10%.

7/15
 IIPT-MO-966-ANG19-02085

Table DR-7035_08
QUANTITY OF SPACER
Rev. 02
DAMPERS PER SPAN PHASE
Date Januay. 2015

SPAN LENGTH ( m ) Quantity of spacer dampers

From To per phase
90 134 2
135 198 3
199 261 4
262 324 5
325 388 6
389 453 7
454 516 8
517 579 9
580 641 10

NOTE :Maximum subspan length 70 metres

Maximum extremity subspan length 35 metres

For spans up to 90 metres : 1 spacer damper per phase,

positioned at 45% of the span length

8/15
 IIPT-MO-966-ANG19-02085

BASIC CRITERIA AND MEASURING SYSTEM TO BE FOLLOWED TO

CORRECTLY ESTABLISH “DAMP” SPACER DAMPER POSITIONING

All dimension shown in the in-span positioning tables refer to

measurements taken along the actual length of the conductors.
The starting points of measurements (K) are taken as shown in Fig. 1,2 and
3 below.

The maximum variation tolerance permissible on the individual sub-span

distances shown, must be within ± 1 m.

Note 1: The spacer damper shall be located at min. 2 meters away from
any mid span joint, repair sleeve or any other fitting attachment to the
conductor.

Note 2: “SPAN LENGTH” means (see figures 1, 2 and 3) the distances

between:
 Tension clamp to tension clamp, or
 Tension clamp to suspension clamp, or
 Suspension clamp to suspension clamp

9/15
 IIPT-MO-966-ANG19-02085

Reference: DR-7035_08

SPACERS N° 2 SPACERS N° 3 SPACERS N° 4

LENGTH (m) LENGTH (m) LENGTH (m)
Span Sub-Span Span Sub-Span Span Sub-Span
90 28 37 25 135 30 36 44 25 199 30 48 43 53 25
91 28 38 25 136 30 37 44 25 200 30 49 43 53 25
92 28 39 25 137 30 37 45 25
93 28 40 25 138 30 38 45 25 201 30 50 43 53 25
94 28 41 25 139 30 39 45 25 202 30 50 43 54 25
95 28 42 25 140 30 39 46 25 203 30 50 44 54 25
96 28 43 25 204 30 50 45 54 25
97 29 43 25 141 30 39 47 25 205 30 50 45 55 25
98 29 44 25 142 30 40 47 25 206 30 51 45 55 25
99 29 45 25 143 30 40 48 25 207 30 52 45 55 25
100 29 46 25 144 30 41 48 25 208 30 52 46 55 25
145 30 42 48 25 209 30 52 46 56 25
101 29 47 25 146 30 42 49 25 210 30 52 46 57 25
102 29 48 25 147 30 43 49 25
103 29 49 25 148 30 43 50 25 211 30 52 47 57 25
104 29 50 25 149 30 43 51 25 212 30 53 47 57 25
105 29 51 25 150 30 44 51 25 213 30 54 47 57 25
106 29 52 25 214 30 54 48 57 25
107 29 53 25 151 30 45 51 25 215 30 54 48 58 25
108 30 53 25 152 30 45 52 25 216 30 54 48 59 25
109 30 53 26 153 30 45 53 25 217 30 55 48 59 25
110 30 54 26 154 30 46 53 25 218 30 55 49 59 25
155 30 46 54 25 219 30 56 49 59 25
111 31 54 26 156 30 47 54 25 220 30 56 49 60 25
112 31 55 26 157 30 48 54 25
113 31 55 27 158 30 48 55 25 221 30 56 50 60 25
114 31 56 27 159 30 48 56 25 222 30 56 50 61 25
115 32 56 27 160 30 49 56 25 223 30 57 50 61 25
116 32 57 27 224 30 57 51 61 25
117 32 57 28 161 30 50 56 25 225 30 57 52 61 25
118 32 58 28 162 30 50 57 25 226 30 58 52 61 25
119 33 58 28 163 30 50 58 25 227 30 58 52 62 25
120 33 59 28 164 30 51 58 25 228 30 58 53 62 25
165 30 51 59 25 229 30 58 53 63 25
121 33 60 28 166 30 52 59 25 230 30 59 53 63 25
122 33 61 28 167 30 52 60 25
123 33 61 29 168 30 53 60 25 231 30 59 53 64 25
124 34 61 29 169 30 53 61 25 232 30 60 53 64 25
125 35 61 29 170 30 54 61 25 233 30 60 54 64 25
126 35 62 29 234 30 60 55 64 25
127 35 63 29 171 30 55 61 25 235 30 60 55 65 25
128 35 64 29 172 30 55 62 25 236 30 61 55 65 25
129 35 65 29 173 30 55 63 25 237 30 61 55 66 25
130 35 66 29 174 30 56 63 25 238 30 62 55 66 25
175 30 56 64 25 239 30 62 55 66 26
131 35 66 30 176 30 57 64 25 240 31 62 55 66 26
132 35 67 30 177 30 58 64 25
133 35 68 30 178 30 58 65 25 241 31 62 56 66 26
134 35 69 30 179 30 59 65 25 242 32 62 56 66 26
180 30 59 65 26 243 32 62 56 66 27
244 32 63 56 66 27
181 31 59 65 26 245 32 63 56 67 27
182 31 59 66 26 246 32 63 57 67 27
183 32 59 66 26 247 32 63 57 68 27
184 32 60 66 26 248 33 63 57 68 27
185 32 60 66 27 249 33 64 57 68 27
186 32 60 67 27 250 33 64 57 68 28
187 32 60 68 27
188 33 60 68 27 251 33 64 58 68 28
189 33 60 68 28 252 33 65 58 68 28
190 33 61 68 28 253 33 65 59 68 28
254 34 65 59 68 28
191 33 61 68 29 255 34 65 59 68 29
192 33 62 68 29 256 34 65 59 69 29
193 33 62 69 29 257 34 66 59 69 29
194 34 62 69 29 258 35 66 59 69 29
195 34 63 69 29 259 35 66 59 69 30
196 35 63 69 29 260 35 66 60 69 30
197 35 63 69 30
198 35 63 70 30 261 35 66 60 70 30

10/15
 IIPT-MO-966-ANG19-02085

Reference: DR-7035_08

SPACERS N° 5 SPACERS N° 6 SPACERS N° 7

LENGTH (m) LENGTH (m) LENGTH (m)
Span Sub-Span Span Sub-Span Span Sub-Span
262 30 53 47 57 50 25 325 30 56 51 58 48 57 25 389 30 58 49 55 61 52 59 25
263 30 54 47 57 50 25 326 30 56 51 59 48 57 25 390 30 58 49 56 61 52 59 25
264 30 54 47 58 50 25 327 30 56 51 59 49 57 25
265 30 54 48 58 50 25 328 30 57 51 59 49 57 25 391 30 59 49 56 61 52 59 25
266 30 54 48 58 51 25 329 30 57 51 59 50 57 25 392 30 59 49 56 61 52 60 25
267 30 54 48 59 51 25 330 30 58 51 59 50 57 25 393 30 59 50 56 61 52 60 25
268 30 54 48 59 52 25 394 30 59 50 56 62 52 60 25
269 30 55 48 59 52 25 331 30 58 51 60 50 57 25 395 30 59 50 56 62 53 60 25
270 30 55 49 59 52 25 332 30 58 52 60 50 57 25 396 30 59 50 56 63 53 60 25
333 30 58 52 60 50 58 25 397 30 59 50 56 63 54 60 25
271 30 56 49 59 52 25 334 30 58 52 60 50 59 25 398 30 59 50 56 63 54 61 25
272 30 56 49 59 53 25 335 30 58 52 61 50 59 25 399 30 59 51 56 63 54 61 25
273 30 56 50 59 53 25 336 30 58 52 61 51 59 25 400 30 60 51 56 63 54 61 25
274 30 56 50 60 53 25 337 30 58 53 61 51 59 25
275 30 56 50 60 54 25 338 30 59 53 61 51 59 25 401 30 60 51 57 63 54 61 25
276 30 56 51 60 54 25 339 30 59 53 61 52 59 25 402 30 60 51 57 63 54 62 25
277 30 56 51 61 54 25 340 30 60 53 61 52 59 25 403 30 60 51 57 64 54 62 25
278 30 57 51 61 54 25 404 30 60 51 57 64 55 62 25
279 30 57 51 61 55 25 341 30 60 53 62 52 59 25 405 30 61 51 57 64 55 62 25
280 30 57 52 61 55 25 342 30 60 53 62 52 60 25 406 30 61 51 58 64 55 62 25
343 30 60 54 62 52 60 25 407 30 61 52 58 64 55 62 25
281 30 57 52 62 55 25 344 30 60 55 62 52 60 25 408 30 61 52 58 65 55 62 25
282 30 58 52 62 55 25 345 30 60 55 62 53 60 25 409 30 61 52 58 65 55 63 25
283 30 58 52 63 55 25 346 30 60 55 63 53 60 25 410 30 62 52 58 65 55 63 25
284 30 58 52 63 56 25 347 30 61 55 63 53 60 25
285 30 58 53 63 56 25 348 30 61 55 63 53 61 25 411 30 62 52 58 65 56 63 25
286 30 59 53 63 56 25 349 30 61 55 63 54 61 25 412 30 62 52 59 65 56 63 25
287 30 59 54 63 56 25 350 30 61 56 63 54 61 25 413 30 62 53 59 65 56 63 25
288 30 59 54 63 57 25 414 30 62 53 60 65 56 63 25
289 30 60 54 63 57 25 351 30 61 56 63 54 62 25 415 30 62 54 60 65 56 63 25
290 30 60 54 64 57 25 352 30 61 56 64 54 62 25 416 30 62 54 60 65 56 64 25
353 30 62 56 64 54 62 25 417 30 62 54 60 65 56 64 26
291 30 60 54 65 57 25 354 30 62 56 65 54 62 25 418 30 62 54 60 65 57 64 26
292 30 61 54 65 57 25 355 30 63 56 65 54 62 25 419 30 63 54 60 65 57 64 26
293 30 61 55 65 57 25 356 30 63 56 65 55 62 25 420 30 63 54 60 66 57 64 26
294 30 61 55 65 58 25 357 31 63 56 65 55 62 25
295 31 61 55 65 58 25 358 31 63 57 65 55 62 25 421 31 63 54 60 66 57 64 26
296 31 61 55 66 58 25 359 31 63 57 65 55 63 25 422 31 63 54 60 66 58 64 26
297 31 61 55 66 59 25 360 31 63 57 65 55 63 26 423 31 63 55 60 66 58 64 26
298 31 61 55 66 59 26 424 32 63 55 60 66 58 64 26
299 31 62 55 66 59 26 361 31 63 58 65 55 63 26 425 32 63 55 61 66 58 64 26
300 31 62 56 66 59 26 362 31 64 58 65 55 63 26 426 32 64 55 61 66 58 64 26
363 31 64 58 65 56 63 26 427 32 64 55 61 66 58 65 26
301 31 62 56 67 59 26 364 31 64 58 65 56 64 26 428 32 64 55 61 67 58 65 26
302 32 62 56 67 59 26 365 31 64 58 66 56 64 26 429 32 64 55 61 67 58 65 27
303 32 62 56 67 60 26 366 31 64 58 66 56 64 27 430 32 64 55 62 67 58 65 27
304 32 63 56 67 60 26 367 32 64 58 66 56 64 27
305 32 63 57 67 60 26 368 32 64 58 66 56 64 28 431 32 64 55 62 68 58 65 27
306 32 63 57 67 60 27 369 33 64 58 66 56 64 28 432 32 65 55 62 68 58 65 27
307 32 63 57 67 61 27 370 33 64 58 66 57 64 28 433 33 65 55 62 68 58 65 27
308 32 63 57 67 61 28 434 33 65 55 62 68 58 66 27
309 32 63 58 67 61 28 371 33 64 58 67 57 64 28 435 33 65 55 62 68 58 66 28
310 32 64 58 67 61 28 372 33 65 58 67 57 64 28 436 33 65 55 62 68 59 66 28
373 33 65 59 67 57 64 28 437 33 65 56 62 68 59 66 28
311 33 64 58 67 61 28 374 33 65 59 67 57 65 28 438 33 66 56 62 68 59 66 28
312 33 64 58 68 61 28 375 33 65 60 67 57 65 28 439 34 66 56 62 68 59 66 28
313 33 65 58 68 61 28 376 33 66 60 67 57 65 28 440 34 66 56 63 68 59 66 28
314 33 65 59 68 61 28 377 33 66 60 68 57 65 28
315 33 65 59 68 61 29 378 34 66 60 68 57 65 28 441 34 66 57 63 68 59 66 28
316 33 65 59 69 61 29 379 34 66 60 68 57 66 28 442 34 66 57 63 69 59 66 28
317 33 65 59 69 62 29 380 34 66 60 68 57 66 29 443 34 66 57 63 69 60 66 28
318 34 65 59 69 62 29 444 34 66 57 63 69 60 66 29
319 34 65 59 69 62 30 381 34 66 60 68 58 66 29 445 34 66 57 63 69 60 67 29
320 34 65 59 70 62 30 382 34 66 60 68 59 66 29 446 34 67 57 63 69 60 67 29
383 34 66 60 69 59 66 29 447 34 67 57 63 69 61 67 29
321 35 65 59 70 62 30 384 35 66 60 69 59 66 29 448 34 67 58 63 69 61 67 29
322 35 65 59 70 63 30 385 35 66 60 69 59 67 29 449 34 67 58 64 69 61 67 29
323 35 66 59 70 63 30 386 35 66 61 69 59 67 29 450 34 67 58 64 70 61 67 29
324 35 66 60 70 63 30 387 35 66 61 69 59 67 30
388 35 67 61 69 59 67 30 451 34 67 58 64 70 61 68 29
452 35 67 58 64 70 61 68 29
453 35 67 58 64 70 61 68 30

11/15
 IIPT-MO-966-ANG19-02085

Reference: DR-7035_08

SPACERS N° 8 SPACERS N° 9
LENGTH (m) LENGTH (m)
Span Sub-Span Span Sub-Span
454 30 61 55 48 57 62 55 61 25 517 30 63 54 60 50 56 64 53 62 25
455 30 61 55 49 57 62 55 61 25 518 30 63 54 60 51 56 64 53 62 25
456 30 61 55 49 57 63 55 61 25 519 30 63 54 60 51 56 64 54 62 25
457 30 62 55 49 57 63 55 61 25 520 30 63 54 61 51 56 64 54 62 25
458 30 62 55 49 57 63 55 62 25
459 30 63 55 49 57 63 55 62 25 521 30 63 54 61 51 57 64 54 62 25
460 30 63 55 49 58 63 55 62 25 522 30 63 54 61 51 57 65 54 62 25
523 30 63 55 61 51 57 65 54 62 25
461 30 63 55 49 58 64 55 62 25 524 30 64 55 61 51 57 65 54 62 25
462 30 63 55 50 58 64 55 62 25 525 30 64 55 61 51 57 65 55 62 25
463 30 63 56 50 58 64 55 62 25 526 30 64 55 61 52 57 65 55 62 25
464 30 63 56 50 58 64 56 62 25 527 30 64 55 62 52 57 65 55 62 25
465 30 63 57 50 58 64 56 62 25 528 30 64 55 62 52 57 65 55 63 25
466 30 63 57 50 59 64 56 62 25 529 30 64 55 62 52 58 65 55 63 25
467 30 64 57 50 59 64 56 62 25 530 30 64 55 63 52 58 65 55 63 25
468 30 64 57 50 59 64 57 62 25
469 30 64 57 51 59 64 57 62 25 531 30 64 56 63 52 58 65 55 63 25
470 30 64 57 51 59 64 57 63 25 532 30 64 56 63 52 58 65 55 64 25
533 30 64 56 63 52 58 65 56 64 25
471 30 64 57 51 59 65 57 63 25 534 30 64 56 63 52 59 65 56 64 25
472 31 64 57 51 59 65 57 63 25 535 30 64 56 63 52 59 65 56 64 26
473 31 64 58 51 59 65 57 63 25 536 30 65 56 63 52 59 65 56 64 26
474 31 64 58 51 59 65 57 64 25 537 30 65 56 63 53 59 65 56 64 26
475 31 64 58 51 59 66 57 64 25 538 30 65 56 63 53 59 66 56 64 26
476 31 64 58 51 60 66 57 64 25 539 31 65 56 63 53 59 66 56 64 26
477 31 64 58 51 60 66 57 64 26 540 31 65 56 63 53 59 66 57 64 26
478 31 64 58 52 60 66 57 64 26
479 31 64 58 52 60 66 58 64 26 541 31 65 56 63 53 60 66 57 64 26
480 31 65 58 52 60 66 58 64 26 542 31 65 56 64 53 60 66 57 64 26
543 31 65 56 64 53 60 66 57 64 27
481 31 65 59 52 60 66 58 64 26 544 32 65 56 64 53 60 66 57 64 27
482 31 65 59 53 60 66 58 64 26 545 32 66 56 64 53 60 66 57 64 27
483 32 65 59 53 60 66 58 64 26 546 32 66 56 64 53 60 67 57 64 27
484 32 65 59 53 60 66 59 64 26 547 32 66 57 64 53 60 67 57 64 27
485 32 65 59 53 60 67 59 64 26 548 32 66 57 64 53 60 67 57 65 27
486 32 65 59 53 60 67 59 64 27 549 32 66 57 64 54 60 67 57 65 27
487 32 65 59 53 60 67 59 65 27 550 32 66 57 64 54 61 67 57 65 27
488 32 65 59 53 61 67 59 65 27
489 32 66 59 53 61 67 59 65 27 551 32 66 57 64 54 61 67 58 65 27
490 32 66 59 53 62 67 59 65 27 552 32 66 58 64 54 61 67 58 65 27
553 32 66 58 64 54 61 67 58 65 28
491 32 66 59 53 62 67 60 65 27 554 32 67 58 64 54 61 67 58 65 28
492 32 66 59 53 62 67 60 66 27 555 32 67 58 65 54 61 67 58 65 28
493 32 66 59 54 62 67 60 66 27 556 33 67 58 65 54 61 67 58 65 28
494 32 66 59 54 62 68 60 66 27 557 33 67 58 65 54 61 68 58 65 28
495 32 66 59 54 62 68 60 66 28 558 33 67 58 65 55 61 68 58 65 28
496 33 66 59 54 62 68 60 66 28 559 33 67 58 65 55 61 68 58 66 28
497 33 66 60 54 62 68 60 66 28 560 33 67 58 65 55 61 68 59 66 28
498 33 67 60 54 62 68 60 66 28
499 33 67 60 54 62 68 60 66 29 561 33 68 58 65 55 61 68 59 66 28
500 33 68 60 54 62 68 60 66 29 562 33 68 58 65 56 61 68 59 66 28
563 33 68 58 65 56 61 68 59 66 29
501 33 68 60 54 62 69 60 66 29 564 33 68 58 65 56 62 68 59 66 29
502 33 68 60 54 62 69 61 66 29 565 33 68 58 65 56 62 68 59 67 29
503 33 68 61 54 62 69 61 66 29 566 33 68 58 66 56 62 68 59 67 29
504 33 68 61 54 62 69 61 67 29 567 34 68 58 66 56 62 68 59 67 29
505 33 68 61 54 63 69 61 67 29 568 34 68 58 66 56 62 69 59 67 29
506 33 68 61 55 63 69 61 67 29 569 34 68 59 66 56 62 69 59 67 29
507 34 68 61 55 63 69 61 67 29 570 34 68 59 66 57 62 69 59 67 29
508 34 68 61 55 63 69 62 67 29
509 34 69 61 55 63 69 62 67 29 571 34 69 59 66 57 62 69 59 67 29
510 34 69 61 55 63 69 62 67 30 572 34 69 59 67 57 62 69 59 67 29
573 34 69 59 67 57 62 69 59 67 30
511 34 69 61 56 63 69 62 67 30 574 34 69 59 67 57 63 69 59 67 30
512 34 69 61 56 63 70 62 67 30 575 34 69 60 67 57 63 69 59 67 30
513 35 69 61 56 63 70 62 67 30 576 34 69 60 67 57 63 69 59 68 30
514 35 69 62 56 63 70 62 67 30 577 34 69 60 67 57 63 70 59 68 30
515 35 69 62 56 64 70 62 67 30 578 35 69 60 67 57 63 70 59 68 30
516 35 69 62 56 64 70 62 68 30 579 35 69 60 67 57 63 70 60 68 30

12/15
 IIPT-MO-966-ANG19-02085

Reference: DR-7035_08

SPACERS N° 10
LENGTH (m)
Span Sub-Span
580 30 63 58 51 59 53 62 56 65 58 25

581 30 63 58 51 59 53 63 56 65 58 25
582 30 63 58 52 59 53 63 56 65 58 25
583 30 63 58 52 60 53 63 56 65 58 25
584 30 64 58 52 60 53 63 56 65 58 25
585 30 64 58 52 60 54 63 56 65 58 25
586 30 64 58 52 60 54 63 56 65 59 25
587 30 64 59 52 60 54 63 56 65 59 25
588 30 64 59 52 60 54 64 56 65 59 25
589 30 64 59 52 60 55 64 56 65 59 25
590 30 64 59 52 60 55 64 56 65 59 26

591 30 64 59 52 60 55 64 56 65 60 26
592 30 65 59 52 60 55 64 56 65 60 26
593 30 65 59 53 60 55 64 56 65 60 26
594 30 65 59 53 61 55 64 56 65 60 26
595 30 65 59 53 61 55 64 56 66 60 26
596 30 65 59 53 61 55 64 57 66 60 26
597 31 65 59 53 61 55 64 57 66 60 26
598 31 65 59 53 61 55 64 57 66 60 27
599 31 65 59 53 61 55 65 57 66 60 27
600 31 66 59 53 61 55 65 57 66 60 27

601 31 66 59 54 61 55 65 57 66 60 27
602 31 66 59 54 61 56 65 57 66 60 27
603 31 66 59 54 61 56 65 58 66 60 27
604 32 66 59 54 61 56 65 58 66 60 27
605 32 66 60 54 61 56 65 58 66 60 27
606 32 66 60 54 62 56 65 58 66 60 27
607 32 66 60 54 62 56 65 58 67 60 27
608 32 66 60 54 62 56 65 58 67 61 27
609 32 66 60 54 62 57 65 58 67 61 27
610 32 66 61 54 62 57 65 58 67 61 27

611 32 67 61 54 62 57 65 58 67 61 27
612 32 67 61 54 62 57 66 58 67 61 27
613 33 67 61 54 62 57 66 58 67 61 27
614 33 67 61 54 63 57 66 58 67 61 27
615 33 67 61 54 63 57 66 58 67 61 28
616 33 67 61 54 63 57 66 59 67 61 28
617 33 67 61 54 63 57 66 59 68 61 28
618 33 67 61 55 63 57 66 59 68 61 28
619 33 67 61 55 63 57 66 59 68 62 28
620 33 67 61 55 63 57 67 59 68 62 28

621 33 68 61 55 63 57 67 59 68 62 28
622 33 68 61 55 63 58 67 59 68 62 28
623 33 68 61 55 63 58 67 59 68 62 29
624 33 68 61 55 63 58 67 60 68 62 29
625 33 68 61 55 63 58 67 60 69 62 29
626 34 68 61 55 63 58 67 60 69 62 29
627 34 68 62 55 63 58 67 60 69 62 29
628 34 68 62 56 63 58 67 60 69 62 29
629 34 68 62 56 64 58 67 60 69 62 29
630 34 68 62 56 64 58 67 60 69 63 29

631 34 68 63 56 64 58 67 60 69 63 29
632 34 68 63 56 64 58 68 60 69 63 29
633 34 68 63 57 64 58 68 60 69 63 29
634 34 68 63 57 64 58 68 61 69 63 29
635 34 69 63 57 64 58 68 61 69 63 29
636 34 69 63 57 65 58 68 61 69 63 29
637 34 69 63 57 65 58 68 61 70 63 29
638 35 69 63 57 65 58 68 61 70 63 29
639 35 69 63 57 65 58 68 61 70 64 29
640 35 69 63 57 65 59 68 61 70 64 29

641 35 69 63 57 65 59 68 61 70 64 30

13/15
 IIPT-MO-966-ANG19-02085

VIBRATION DAMPER
MOSDORFER TYPE 9313.006/G/1 - DRAWING N. F1001276

CORRECT CLAMP INSTALLATION

SIMPLE INSTALLATION CAN BE ACHIEVED AS FOLLOWS

Unscrew the clamp bolt and locate the clamp

body correctly on the conductor.

By hand locate the clamp cap on the

conductor and hold both clamp components
correctly seated on the conductor

Without loosening that hold, tighten the bolt

by means of a torque wrench, to the
installation torque of 40 Nm ±10%

IMPORTANT NOTES
THE VIBRATION DAMPERS MUST BE INSTALLED WITHIN 24 HOURS FROM
SUBCONDUCTORS ADJUSTMENT AND CLAMPING.

14/15
 IIPT-MO-966-ANG19-02085

VIBRATION DAMPERS QUANTITY AND POSITIONING

TABLE VDP 9313_40

DATE Febuary 2021

Conductor: ALOLS 300/69 mm² (19xØ2.15 St + 30xØ3.60 Al)Suspension

clamp: Bolted type + rods n°18; Ø 4.62 mm; 1140 mm length

NUMBER OF DAMPERS POSITIONING

SPAN LENGTHS (m) PER SPAN FOR EACH (Tolerance ± 5%)
CONDUCTOR X1 (m) X2 (m) X3 (m)

Up to 500 TWO 1.6

Distribution along the span Datum reference for measurement-location

ONE DAMPER X

TWO DAMPERS
X
X
FOUR DAMPERS

X
SIX DAMPERS
NOTES
a – The positioning criteria is applied for span suspension - suspension, suspension -
tension, tension - tension
b – One damper per span: for span suspension – tension place the damper close to the
suspension
c – Smaller damper counterweight tower side (suggested)

15/15