Scribd
Upload
71 views3 pages

Friction

Uploaded by

Romharsh Oli
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
71 views3 pages

Friction

Uploaded by

Romharsh Oli
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 3
1 A body of weight 300N is lying on a rough horizontal plane having coefficient of friction as 0.35. Find the magnitude of the force P. which can move body. while acting at an angle of 355 [99.6N] 2 The coefficient of friction are 4. = 0.40 and 4 = 0.3 between all surface of contacts. Determine the smallest force P required to start the 30 kg block moving if cable AB is attaches! as shown, [353 N] 3° If the statie coefficient of friction for all the surfaces is 0.35, find the force F needed to start the 200N weight moving to the right. [128.2 N] el Figure 3 4 What should be the value of angle so that motion of the 90 N block impends down the plane? ‘The coefficient of friction for alll surfaces is 1/3. [29.05°] 5 Knowing that the coefficient of friction between the 25 kg block and the incline is p= 0.25 determine, (a) smallest value of P required to start the block moving up the incline (b) the onresponding value of f. [170.3 N. 14°] Pp Be he" Figure 5 Figure 6 Refewing wo the figure shown, detemine the lst value af Pt cae he sys wn ingen rightward. Assume the coefficient of friction between the block and incline surface tn be 0.2 and pulley to be frictionless. [161.9 .N, 11.3°] 7 Knowing that @= 40° determine the smallest force P for which equilibrium of the 7.5 kg block is maintained. Take p,= O45 and y,= 0.35. [74.5 N] 0.6m p 75 kg 4 Figure 7 Figure 8 8 Acbox of mass 75 kg rests on floor. The static coefficient of friction for contact surface is 0.2. ‘What is the highest position for a horizontal load P that permits it to just move box without over turning? [15m] 9 The coefficients of friction berween the block and incline are p, = 0.35 and y, = 0.25. Determine whether the block is in equilibrium and find the magnitude and direction of friction foree when @ = 30° and ef Figure 9 10. Find the friction force for the block shown and state whether the block is in equilibrium or in motion. Also determine the additional force P that must be added to 140 N force to just move the block to left. [1,=0.2] 11 Two masses m, = 22.5 kg and m, = 14 kg are tied together by a rope parallel to the incline plane surface as shown in figure. If y, for m, is 0.25 and that for mis 0-5 find (a) value of @ for which masses will just start slipping (b) tension in the rope. [19:08*, 20 N] yw 2 s g Figure 11 a Figncla Figure 10 12. A uniform ladder of length 5 m and weighing 20 N is placed against a smooth vertical wall with lower end 4 m away form the If the ladder is just to whip, determine, (a) coefficient of friction (b} friction force acting on ladder at point of contact between ladder and floor. (0.667, 13.4 N] jadder of uniform bar weighing 60 kg is constructed to move in the smooth vertical guides. If p, = 0.80, determine horizontal force P required to initiate slipping at A. , u2 ies to, U2 A Figure 13, Figure 14 14 Two planes AC and BC are inclined at 60° and 30°to the horizontal. A lead of 1000 N rests on inclined place BC and W on AC as shown, Determine the range of W for the equilibrium, Take 1, for right plane as 0.80 and that of left plane as 0.28. [266.5 N, 969.3 N]

You might also like