Anna University Chennai CHENNAI - 600 025: B.E - Electronics and Instrumentation Engineering (Full Time)

ANNA UNIVERSITY CHENNAI
CHENNAI - 600 025
UNIVERSITY DEPARTMENTS
REGULATIONS 2012
CURRICULLA AND SYLLABI FOR
I TO VIII SEMESTER
B.E . ELECTRONICS AND

INSTRUMENTATION ENGINEERING
(FULL TIME)
Programme Educational Objectives
Bachelor of Electronics and Instrumentation Engineering curriculum is designed to prepare the

graduates having attitude and knowledge to
1. have successful technical and professional careers in their chosen fields such as Process
Control, Electronics & Information Technology.
2. engross in life long process of learning to keep themselves abreast of new developments in
the field of Electronics & Instrumentation
Programme Outcomes
The graduates will have the ability to
a. Apply the Mathematical knowledge and the basics of Science and Engineering to solve the
problems pertaining to Electronics and Instrumentation Engineering.
b. Identify and formulate Instrumentation Engineering problems from research literature and be
able to analyze the problem using first principles of Mathematics and Engineering Sciences.
c. Come out with solutions for the complex problems and to design system components or
process that fulfill the particular needs taking into account public health and safety and the
social, cultural and environmental issues.
d. Draw well-founded conclusions applying the knowledge acquired from research and research
methods including design of experiments, analysis and interpretation of data and synthesis of
information and to arrive at significant conclusion.
e. Form, select and apply relevant techniques, resources and Engineering and IT tools for
Engineering activities like electronic prototyping, modeling and control of systems/processes
and also being conscious of the limitations.
f. Understand the role and responsibility of the Professional Instrumentation Engineer and to
assess societal, health, safety issues based on the reasoning received from the contextual
knowledge.
g. Be aware of the impact of professional Engineering solutions in societal and environmental
contexts and exhibit the knowledge and the need for sustainable Development.
h. Apply the principles of Professional Ethics to adhere to the norms of the engineering practice
and to discharge ethical responsibilities.
i. Function actively and efficiently as an individual or a member/leader of different teams and
multidisciplinary projects.
j. Communicate efficiently the engineering facts with a wide range of engineering community
and others, to understand and prepare reports and design documents; to make effective
presentations and to frame and follow instructions.
k. Demonstrate the acquisition of the body of engineering knowledge and insight and
Management Principles and to apply them as member / leader in teams and multidisciplinary
environments.
l. Recognize the need for self and life-long learning, keeping pace with technological challenges
in the broadest sense.
PEO \ a b c d e f g h i j k l
PO
1         
2         
1
UNIVERSITY DEPARTMENTS
ANNA UNIVERSITY :: CHENNAI 600 025
REGULATION – 2012
B.E . ELECTRONICS AND INSTRUMENTATION ENGINEERING I TO
VIII SEMESTERS CURRICULUM AND SYLLABUS
I SEMESTER
S.No CODE NO COURSE TITLE L T P C
THEORY
1 HS8151 Technical English I 3 1 0 4
2 MA8151 Mathematics - I 3 1 0 4
3 PH8151 Engineering Physics 3 0 0 3
4 CY8151 Engineering Chemistry 3 0 0 3
5 GE8151 Computing Techniques 3 0 0 3
6 GE8152 Engineering Graphics 2 0 3 4
PRACTICAL
7 PH8161 Physics Laboratory 0 0 2 1
8 CY8161 Chemistry Laboratory 0 0 2 1
9 GE8161 Computer Practices Laboratory 0 0 3 2
10 GE8162 Engineering Practices Laboratory 0 0 3 2
TOTAL 17 2 13 27
II SEMESTER
THEORY
1 HS8251 Technical English II 3 1 0 4
2 MA8251 Mathematics - II 3 1 0 4
3 PH8252 Physics for Electronics Engineering 3 0 0 3
2
4 CY8252 Chemistry for Electrical and Electronics 3 0 0 3
Engineering
5 EI8201 Electric Circuits 3 0 0 3
6 EI8202 Electronic Devices, Circuits and Application 3 0 0 3
PRACTICAL
7 EI8211 Computer Practice II 0 0 3 2
8 EI8212 Electron Devices and Electric Circuits Lab 0 0 3 2
TOTAL 18 2 6 24
III SEMESTER
THEORY
1 MA8357 Transform Techniques and Partial 3 1 0 4
Differential Equations
2 GE8351 Environmental Science & Engineering 3 0 0 3
3 EI8301 Electrical and Electronic Measurements 3 0 0 3
4 EI8302 Electrical Machines 3 0 0 3

5 EI8303 Operational Amplifiers and Linear 3 0 0 3
Integrated Circuits
6 EI8304 Transducer Engineering 3 0 0 3
PRACTICAL
7 EI8311 Electrical Machines Lab 0 0 3 2
8 EI8312 Transducer and Measurement Lab 0 0 3 2
TOTAL 18 1 6 23
IV SEMESTER
THEORY
1 MA8353 Numerical Methods 3 1 0 4
2 EI8401 Control Engineering 3 0 0 3
3 EI8402 Digital Logic Theory 3 0 0 3
3
4 ME8403 Fundamentals of Thermodynamics & 3 1 0 4
Fluid Mechanics
5 EI8404 Industrial Instrumentation I 3 0 0 3
6 EI8405 Microprocessor, Microcontroller and 3 0 0 3
Applications
PRACTICAL
7 EI8411 Linear and Digital Integrated Circuits Lab 0 0 3 2
8 EI8412 Microprocessor, Microcontroller and 0 0 3 2
Applications Lab
TOTAL 18 2 6 24
V SEMESTER
THEORY
1 EI8501 Industrial Instrumentation II 3 0 0 3
2 EI8502 Principles of Communication Engineering 3 0 0 3
3 EI8503 Principles of Digital Signal Processing 3 0 0 3
4 EI8504 Process Control 3 0 0 3
5 Elective I 3 0 0 3
6 Elective II 3 0 0 3
PRACTICAL
7 EI8511 Industrial Instrumentation Lab 0 0 3 2
8 EI8512 Process Control Lab 0 0 3 2
TOTAL 18 0 6 22
VI SEMESTER
THEORY
1 MG8651 Engineering Management 3 0 0 3
2 EI8601 Analytical Instruments 3 0 0 3
3 EI8602 Computer Control of Processes 3 0 0 3
4 EI8603 Micro controller based system design 3 0 0 3
4
5 Elective III 3 0 0 3
6 Elective IV 3 0 0 3
PRACTICAL
7 HS8561 Employability skills 0 0 2 1
8 EI8611 Computer Control of Processes Lab 0 0 3 2
TOTAL 18 0 5 21
VII SEMESTER
THEORY
1 EI8701 Logic and Distributed Control System 3 0 0 3
2 EI8702 VLSI Design 3 0 0 3
3 EI8703 Biomedical Instrumentation 3 0 0 3
4 Elective V 3 0 0 3
5 Elective VI 3 0 0 3
6 Elective VII 3 0 0 3
PRACTICAL
7 EI8711 Creative and Innovative project 0 0 3 2
8 EI8712 System Design Lab 0 0 3 2
TOTAL 18 0 6 22
VIII SEMESTER
THEORY
1 Elective VIII 3 0 0 3
2 Elective IX 3 0 0 3
PRACTICAL
3 EI8811 Project work 0 0 12 6
TOTAL 6 0 12 12
TOTAL NO OF CREDITS (INCLUSIVE OF I SEMESTER ) : 175
5
ELECTIVES FOR ELECTRICAL AND INSTRUMENTATION ENGINEERING
CODE NO. COURSE TITLE L T P C

EI8001 Advanced Control Engineering 3 0 0 3
EI8002 Applied Digital Signal Processing 3 0 0 3
EI8003 Applied Soft Computing 3 0 0 3
EI8004 Data Base Management 3 0 0 3
EI8005 Fibre Optics and Laser Instrumentation 3 0 0 3
EI8006 Fundamentals of Data Structures and Algorithms 3 0 0 3
EI8007 Fundamentals of Digital Image Processing 3 0 0 3
EI8008 Fundamentals of Nano Science and MEMS 3 0 0 3
EI8009 Instrumentation in Petrochemical Industries 3 0 0 3
EI8010 Optimization Techniques 3 0 0 3
EI8011 Power Electronics Devices and Circuit 3 0 0 3
EI8012 Real Time Embedded Systems 3 0 0 3
EI8013 Real Time Operating Systems 3 0 0 3
EI8014 Robotics and Automation 3 0 0 3
EI8015 System Identification and Adaptive Control 3 0 0 3
EI8016 Thermal Power Plant Instrumentation 3 0 0 3
EI8017 Unit Operations and Control 3 0 0 3
EI8018 Virtual Instrumentation 3 0 0 3
EI8071 Industrial Data Networks 3 0 0 3
GE8072 Disaster Management 3 0 0 3
GE8073 Human Rights 3 0 0 3
6
HS8151 TECHNICAL ENGLISH I L T PC
(For all branches of B.E / B.Tech programmes) 3 1 0 4
OBJECTIVES
• To enable all students of engineering and technology develop their basic communication
skills in English.
• To give special emphasis to the development of speaking skills amongst the students of
engineering and technology.
• To ensure that students use the electronic media such as internet and supplement the
learning materials used in the classroom.
• To inculcate the habit of reading for pleasure.
UNIT I 9+3
Listening - Introducing learners to GIE - Types of listening - Listening to audio (verbal
& sounds); Speaking - Speaking about one’s place, important festivals etc. – Introducing
oneself, one’s family / friend; Reading - Skimming a reading passage – Scanning for specific
information - Note-making; Writing - Free writing on any given topic (My favourite place /
Hobbies / School life, etc.) - Sentence completion - Autobiographical writing (writing about
one’s leisure time activities, hometown, etc.); Grammar - Prepositions - Reference words
- Wh-questions - Tenses (Simple); Vocabulary - Word formation - Word expansion (root
words / etymology); E-materials - Interactive exercises for Grammar & Vocabulary - Reading
comprehension exercises - Listening to audio files and answering questions.
UNIT II 9+3
Listening - Listening and responding to video lectures / talks; Speaking - Describing a simple
process (filling a form, etc.) - Asking & answering questions - Telephone skills – Telephone
etiquette; Reading – Critical reading - Finding key information in a given text - Sifting facts
from opinions; Writing - Biographical writing (place, people) - Lab descriptions (general/
specific description of laboratory experiments) - Definitions - Recommendations; Grammar
- Use of imperatives - Subject-verb agreement; Vocabulary - Compound words - Word
Association; E-materials - Interactive exercises for Grammar and Vocabulary - Listening
exercises with sample telephone conversations / lectures – Picture-based activities.
UNIT III 9+3

Listening - Listening to specific task - focused audio tracks; Speaking - Role-play – Simulation
- Group interaction - Speaking in formal situations (teachers, officials, foreigners); Reading
7
- Reading and interpreting visual material; Writing - Jumbled sentences - Coherence and
cohesion in writing - Channel conversion (flowchart into process) - Types of paragraph (cause
& effect / compare & contrast / narrative / analytical) - Informal writing (letter/e-mail/blogs) -
Paraphrasing; Grammar - Tenses (Past) - Use of sequence words - Adjectives; Vocabulary
- Different forms and uses of words, Cause and effect words; E-materials - Interactive
exercises for Grammar and Vocabulary - Excerpts from films related to the theme and follow
up exercises - Pictures of flow charts and tables for interpretations.
UNIT IV 9+3
Listening - Watching videos / documentaries and responding to questions based on them;
Speaking - Responding to questions - Different forms of interviews - Speaking at different
types of interviews; Reading - Making inference from the reading passage - Predicting the
content of a reading passage; Writing - Interpreting visual materials (line graphs, pie charts
etc.) - Essay writing – Different types of essays; Grammar - Adverbs – Tenses – future
time reference; Vocabulary - Single word substitutes - Use of abbreviations & acronyms;
E-materials - Interactive exercises for Grammar and Vocabulary - Sample interviews - film
scenes - dialogue writing.
UNIT V 9+3
Listening - Listening to different accents, Listening to Speeches / Presentations, Listening
to broadcast & telecast from Radio & TV; Speaking - Giving impromptu talks, Making
presentations on given topics; Reading - Email communication - Reading the attachment
files having a poem/joke/proverb - Sending their responses through email Writing - Creative
writing, Poster making; Grammar - Direct and indirect speech; Vocabulary - Lexical items
(fixed / semi fixed expressions); E-materials - Interactive exercises for Grammar & Vocabulary
- Sending emails with attachment – Audio / video excerpts of different accents, - Interpreting
posters
TOTAL : 60 PERIODS
OUTCOMES:
Learners should be able to
 speak clearly, confidently, comprehensibly, and communicate with one or many
listeners using appropriate communicative strategies.
 write cohesively and coherently and flawlessly avoiding grammatical errors, using a
wide vocabulary range, organizing their ideas logically on a topic.
 read different genres of texts adopting various reading strategies.
 listen/view and comprehend different spoken discourses/excerpts in different accents
8
TEXT BOOKS
1. Mindscapes: English for Technologists and Engineers, Orient Black Swan, 2012 .
2. S.P. Dhanavel, English and Communication Skills for Students of Science and
Engineering. Orient Black Swan, Chennai, 2011.
REFERENCE BOOKS
1. Pickett, Nell Ann, Ann A.Laster and Katherine E.Staples. Technical English: Writing,
Reading and Speaking. New York: Longman, 2001.
2. Bailey, Stephen. Academic Writing: A practical guide for students. New York:
Rutledge, 2011.
3. 3. Morgan, David and Nicholas Regan. Take-Off: Technical English for Engineering.
Reading: Garnet Publishing Limited, 2008.
4. 4. Thorn, Michael and Alan Badrick. An Introduction to Technical English. Harlow:
Prentice Hall Europe, 1993.
5. 5. Rizvi, M.Ashraf. Effective Technical Communication. New Delhi: Tata McGraw-Hill
PublishingCompany, 2007.
EXTENSIVE READERS
1. Murthy, Sudha. Wise & Otherwise. New Delhi: Penguin Books India, 2006.
2. Gates, Bill and Collins Hemingway. Business @ the Speed of Thought: Succeeding
in the Digital Economy. New York: Warner Business Books, 2000.
WEBSITE RESOURCES
• www.uefap.com
• www.eslcafe.com
• www.listen-to-english.com
• www.owl.english.purdue.edu
• www.chompchomp.com
9
MA8151 MATHEMATICS – I L T P C
(Common to all branches of B.E. / B.Tech. Programmes) 3 1 0 4
OBJECTIVES:
• To develop the use of matrix algebra techniques this is needed by engineers for practical
applications.
• To make the student knowledgeable in the area of infinite series and their convergence
so that he/ she will be familiar with limitations of using infinite series approximations for
solutions arising in mathematical modeling.
• To familiarize the student with functions of several variables. This is needed in many
branches of engineering.
• To introduce the concepts of improper integrals, Gamma, Beta and Error functions which
are needed in engineering applications.
• To acquaint the student with mathematical tools needed in evaluating multiple integrals
and their usage.
UNIT I MATRICES 9+3
Eigenvalues and Eigenvectors of a real matrix – Characteristic equation – Properties of

eigenvalues and eigenvectors – Cayley-Hamilton Theorem – Diagonalization of matrices –
Reduction of a quadratic form to canonical form by orthogonal transformation – Nature of
quadratic forms.
UNIT II INFINITE SERIES 9+3
Sequences – Convergence of series – General properties – Series of positive terms – Tests

of convergence (Comparison test, Integral test, Comparison of ratios and D’Alembert’s
ratio test) – Alternating series – Series of positive and negative terms – Absolute and
conditional convergence – Power Series – Convergence of exponential, logarithmic and
Binomial Series.
UNIT II FUNCTIONS OF SEVERAL VARIABLES 9+3
Limits and Continuity – Partial derivatives – Homogeneous functions and Euler’s theorem
– Total derivative – Differentiation of implicit functions – Change of variables –Jacobians –
Partial differentiation of implicit functions – Taylor’s series for functions of two variables –
Errors and approximations – Maxima and minima of functions of two variables – Lagrange’s
method of undetermined multipliers.
10
UNIT IV IMPROPER INTEGRALS 9+3
Improper integrals of the first and second kind and their convergence – Evaluation of integrals
involving a parameter by Leibnitz rule – Beta and Gamma functions – Properties – Evaluation
of integrals using Beta and Gamma functions – Error functions.
UNIT V MULTIPLE INTEGRALS 9+3
Double integrals – Change of order of integration – Double integrals in polar coordinates –

Area enclosed by plane curves – Triple integrals – Volume of Solids – Change of variables in
double and triple integrals – Area of a curved surface.
TOTAL : 60 PERIODS
OUTCOMES:
 This course equips students to have basic knowledge and understanding in one fields
of materials and integral
TEXT BOOKS:
1. Grewal B.S., “Higher Engineering Mathematics”, Khanna Publishers, New

Delhi, 40th Edition, 2007.
2. Ramana B.V., “Higher Engineering Mathematics”, Tata McGraw Hill Co.
Ltd., New Delhi, 11th Reprint, 2010.
REFERENCES:
1. Jain R.K. and Iyengar S.R.K., “Advanced Engineering Mathematics”, Narosa
Publications, New Delhi, 3rd Edition, 2007.
2. Bali N., Goyal M. and Watkins C., “Advanced Engineering
Mathematics”, Firewall Media (An imprint of Lakshmi Publications Pvt.,
Ltd.,), New Delhi, 7th Edition, 2009.
3. Greenberg M.D., “Advanced Engineering Mathematics”, Pearson
Education, New Delhi, 2nd Edition, 5th Reprint, 2009.
4. Peter V.O’Neil, “Advanced Engineering Mathematics”, Cengage Learning India
Pvt., Ltd, New Delhi, 2007.
PH8151 ENGINEERING PHYSICS LTPC

(Common to ALL Branches of B.E./B.Tech. Programmes) 3003
OBJECTIVE
• To introduce the basic physics concepts relevant to different branches of
Engineering and Technology.
11
UNIT I PROPERTIES OF MATTER 9
Elasticity - Poisson’s ratio and relationship between moduli (qualitative) - Stress-strain
diagram - factors affecting elasticity - bending of beams - cantilever - bending moment -
theory and experiment of Young’s modulus determination - Uniform and non-uniform
bending - I shaped girders - twisting couple - hollow cylinder - shaft - torsion pendulum -
determination of rigidity modulus- moment of inertia of a body (regular and irregular).
UNIT II ACOUSTICS AND ULTRASONICS 9

Classification of sound - loudness and intensity - Weber-Fechner Law - standard intensity
and intensity level - decibel - reverberation - reverberation time - rate of growth and decay of
sound intensity - derivation of Sabine’s formula - absorption coefficient and its determination -
factors affecting acoustics of buildings : focussing, interference, echo, Echelon effect,
resonance - noise and their remedies. Ultrasonics - production - magnetostriction and
piezoelectric methods - detection of ultrasound - acoustic grating - industrial applications -
NDT - Ultrasonic method: scan modes and practice.
UNIT III THERMAL PHYSICS 9

Thermal expansion - thermal stress - expansion joints - bimetallic strips - thermal
conductivity
- conductions in solids - Forbe’s and Lees’ disc methods - Rectilinear flow of heat
through a rod - flow of heat through a compound materials - radical flow of heat through a
spherical shell - thermal insulation of buildings – Laws of blackbody radiation: Kirchoffs law,
Stephens law, Wiens law, Raleigh-Jean law and Planks law (derivation). Laws of
thermodynamics - Otto and diesel engines and their efficiency - entropy - entropy of Carnot’s
cycle - reverse Carnot’s cycle - refrigerator.
UNIT IV APPLIED OPTICS 9

Interference - Michelson interferometer: construction, working, determination of wave length
and thickness - anti-reflection coating - air wedge and its application - Lasers - Einstein’s
coefficients - CO2 , Nd:YAG and semiconductor lasers - homo junction and hetro junction -
construction and working - applications - Optical fibres - classification (index & mode
based) - principle and propagation of light in optical fibres - acceptance angle and numerical
aperturee - fibre optic communication system - active and passive sensors.
UNIT V SOLID STATE PHYSICS 9

Nature of bonding - growth of single crystals (qualitative) - crystal systems - crystal planes
and directions - expressions for interplanar distance - coordination number and packing
factor for simple structures: SC, BCC, FCC and HCP - structure and significance of NaCl,
12
ZnS, diamond and graphite - crystal imperfections: point defects, dislocations and stacking
faults - unit cell, Bravais space lattices - miller indices.
TOTAL : 45 PERIODS
OUTCOMES:
 The students will have knowledge on the basics of physics related to properties of matter,
optics, acoustics etc., and they will apply these fundamental principles to solve practical
problems related to materials used for engineering applications
TEXTBOOKS:
1. Gaur R.K., and Gupta, S.L., Engineering Physics, Dhanpat Raj Publications,2003.
2. Palanisamy, P.K., Engineering Physics, Scitech Publications (P) Ltd,2006.
3. Arumugam, M., Engineering Physics, Anuradha Publications,2000.
REFERENCEBOOKS:
1. Sankar, B.N., Pillai.S.O., Engineering Physics, New Age International (P) Ltd.,2007.
2. Rajendran.V Engineering Physics, Tata McGraw-Hill,2009.
CY8151 ENGINEERING CHEMISTRY LTPC

(Common to all branches of Engineering and Technology) 3003
OBJECTIVES:
 To make the students conversant with basics of polymer chemistry.
 To make the student acquire sound knowledge of second law of thermodynamics and
second law based derivations of importance in engineering applications in all
disciplines.
 To acquaint the student with concepts of important photophysical and photochemical
processes and spectroscopy.
 To acquaint the students with the basics of nano materials, their properties and
applications.
UNIT I CHEMICAL THERMODYNAMICS 9

Second law: Entropy - entropy change for an ideal gas, reversible and irreversible
processes; entropy of phase transitions; Clausius inequality. Free energy and work function:
Helmholtz and Gibbs free energy functions; Criteria of spontaneity; Gibbs-Helmholtz
equation; Clausius-Clapeyron equation; Maxwell relations – Van’t Hoff isotherm and
13
isochore. Chemical potential; Gibbs-Duhem equation – variation of chemical potential with
temperature and pressure.
UNIT II POLYMER CHEMISTRY 9

Introduction: Classification of polymers – Natural and Synthetic; Thermoplastic and
Thermosetting. Functionality – Degree of polymerisation. Types and mechanism of
polymerisation: Addition (Free Radical, cationic, anionic and living); condensation and
copolymerisation. Properties of polymers: Tg, Tacticity, Molecular weight – weight average,
number average and polydispersity index. Techniques of polymerisation: Bulk, emulsion,
solution and suspension.
UNIT III KINETICS AND CATALYSIS 9

Introduction – reaction velocity, factors affecting reaction velocity, rate constant, order
of reaction, molecularity, pseudo molecular reactions, zero, first, second and third order
reactions, reactions of fractional orders, determination of order of reactions. Catalysis: Auto
catalysis - Enzyme Catalysis: Michaelis-Menton equation; factors affecting enzyme catalysis.
Heterogeneous Catalysis: Types of adsorption isotherms: Langmuir–Hinselwood and Rideal–
Eley Mechanism.
UNIT IV PHOTOCHEMISTRY AND SPECTROSCOPY 9

Photochemistry: Laws of photochemistry - Grotthuss–Draper law, Stark–Einstein law
and Lambert-Beer Law. Photoprocesses - Internal Conversion, Inter-system crossing,
Fluorescence, Phosphorescence, Chemiluminescence and Photo-sensitisation. Spectroscopy:
Electromagnetic spectrum - Absorption of radiation – Electronic, Vibrational and rotational
transitions. Width and intensities of spectral lines. Spectrophotometric estimation of iron. UV-
visible and IR spectroscopy – principles, instrumentation (Block diagram) and applications.
UNIT V NANOCHEMISTRY 9
Basics - distinction between molecules, nanoparticles and bulk materials; size-dependent
properties. Nanoparticles: Nanocluster, nanorod, nanotube and nanowire. Synthesis: Precipitation,
thermolysis, hydrothermal, solvothermal, electrodeposition, chemical vapour deposition, laser
ablation; Properties and Applications. Risk discussion and Future perspectives.
TOTAL : 45 PERIODS
14
OUTCOMES:
 The knowledge gained on polymer chemistry, thermodynamics. spectroscopy, kinetics
and nano materials will provide a strong platform to understand the concepts on these
subjects for further learning.
TEXT BOOKS
1. P. Kannan and A. Ravikrishnan, “Engineering Chemistry”, Sri Krishna Hitech Publishing
Company Pvt. Ltd. Chennai, 2009.
2. S. Vairam, P. Kalyani and Suba Ramesh, “Engineering Chemistry”, Wiley India, 2011
REFERENCE BOOKS
1. P.W. Atkins and de Paula Julio, “Physical Chemistry”, Oxford University Press, 8th
Ed., (Indian Student Edition) (2009).
2. K. K. Rohatgi-Mukherjee, “Fundamental of Photochemistry” New Age International (P)
Ltd., New Delhi, 1986.
3. G.A. Ozin and A.C. Arsenault, “Nanochemistry: A Chemical Approach to
Nanomaterials”, RSC Publishing, 2005.
4. V.R.Gowariker, N.V.Viswanathan and Jayadev Sreedhar, “Polymer Science”, New Age
International P (Ltd.,), Chennai, 2006
GE8151 COMPUTING TECHNIQUES LT P C

3003
OBJECTIVES:
The students should be made to:
 Learn the organization of a digital computer.
 Be exposed to the number systems.
 Learn to think logically and write pseudo code or draw flow charts for problems.
 Be exposed to the syntax of C.
 Be familiar with programming in C.
 Learn to use arrays, strings, functions, pointers, structures and unions in C.
UNIT I INTRODUCTION 8
Generation and Classification of Computers- Basic Organization of a Computer –Number
System – Binary – Decimal – Conversion – Problems. Need for logical analysis and thinking
– Algorithm – Pseudo code – Flow Chart.
15
UNIT II C PROGRAMMING BASICS 10
Problem formulation – Problem Solving - Introduction to ‘ C’ programming –fundamentals
– structure of a ‘C’ program – compilation and linking processes – Constants, Variables –
Data Types – Expressions using operators in ‘C’ – Managing Input and Output operations –
Decision Making and Branching – Looping statements – solving simple scientific and statistical
problems.
UNIT III ARRAYS AND STRINGS 9

Arrays – Initialization – Declaration – One dimensional and Two dimensional arrays. String-
String operations – String Arrays. Simple programs- sorting- searching – matrix operations.
UNIT IV FUNCTIONS AND POINTERS 9

Function – definition of function – Declaration of function – Pass by value – Pass by reference
– Recursion – Pointers - Definition – Initialization – Pointers arithmetic – Pointers and arrays-
Example Problems.
UNIT V STRUCTURES AND UNIONS 9

Introduction – need for structure data type – structure definition – Structure declaration –
Structure within a structure - Union - Programs using structures and Unions – Storage classes,
Pre-processor directives.
TOTAL : 45 PERIODS
OUTCOMES:
At the end of the course, the student should be able to:
 Design C Programs for problems.
 Write and execute C programs for simple applications.
TEXTBOOKS
1. Pradip Dey, Manas Ghosh, “Fundamentals of Computing and Programming in C”, First
Edition, Oxford University Press, 2009
2. Ashok N. Kamthane, “Computer programming”, Pearson Education, 2007.
3. Yashavant P. Kanetkar. “ Let Us C”, BPB Publications, 2011.
REFERENCES
1. Kernighan,B.W and Ritchie,D.M, “The C Programming language”, Second Edition,
Pearson Education, 2006
2. Byron S Gottfried, “ Programming with C”, Schaum’s Outlines, Second Edition, Tata
McGraw-Hill, 2006.
3. R.G. Dromey, “How to Solve it by Computer”, Pearson Education, Fourth Reprint, 2007
16
GE8152 ENGINEERING GRAPHICS LTPC
2034
OBJECTIVES:
• To develop in students, graphic skills for communication of concepts, ideas and design
of engineering products
• To expose them to existing national standards related to technical drawings.
CONCEPTS AND CONVENTIONS (NOT FOR EXAMINATION) 1

Importance of graphics in engineering applications – Use of drafting instruments – BIS
conventions and specifications – Size, layout and folding of drawing sheets – Lettering and
dimensioning.
UNIT I PLANE CURVES AND FREE HAND SKETCHING 14
Basic Geometrical constructions, Curves used in engineering practices

Conics – Construction of ellipse, parabola and hyperbola by eccentricity method – Construction
of cycloid – construction of involutes of square and circle – Drawing of tangents and normal
to the above curves, Scales: Construction of Diagonal and Vernier scales.
Visualization concepts and Free Hand sketching: Visualization principles –Representation
of Three Dimensional objects – Layout of views- Free hand sketching of multiple views from
pictorial views of objects
UNIT II PROJECTION OF POINTS, LINES AND PLANE SURFACES 14

Orthographic projection- principles-Principal planes-First angle projection-Projection of points.
Projection of straight lines (only First angle projections) inclined to both the principal planes
- Determination of true lengths and t r u e inclinations by rotating line method and trapezoidal
method and traces Projection of planes (polygonal and circular surfaces) inclined to both
the principal planes by rotating object method.
UNIT III PROJECTION OF SOLIDS 14

Projection of simple solids like prisms, pyramids, cylinder, cone and truncated solids when the
axis is inclined to one of the principal planes by rotating object method and auxiliary plane method.
UNIT IV PROJECTION OF SECTIONED SOLIDS AND DEVELOPMENT OF

SURFACES 14
Sectioning of above solids in simple vertical position when the cutting plane is inclined to the
17
one of the principal planes and perpendicular to the other – obtaining true shape of section.
Development of lateral surfaces of simple and sectioned solids – Prisms, pyramids cylinders
and cones. Development of lateral surfaces of solids with cut-outs and holes
UNIT V ISOMETRIC AND PERSPECTIVE PROJECTIONS 15

Principles of isometric projection – isometric scale –Isometric projections of simple solids
and truncated solids - Prisms, pyramids, cylinders, cones- combination of two solid objects
in simple vertical positions and miscellaneous problems. Perspective projection of simple
solids-Prisms, pyramids and cylinders by visual ray method and vanishing point method.
COMPUTER AIDED DRAFTING (DEMONSTRATION ONLY) 3

Introduction to drafting packages and demonstration of their use.
TOTAL: 75 PERIODS
OUTCOMES:
On Completion of the course the student will be able to
 perform free hand sketching of basic geometrical constructions and multiple views
of objects.
 do orthographic projection of lines and plane surfaces.
 draw projections and solids and development of surfaces.
 prepare isometric and perspective sections of simple solids.
 demonstrate computer aided drafting
TEXT BOOK
1. N.D.Bhatt and V.M.Panchal, “Engineering Drawing”, Charotar Publishing House, 50th
Edition, 2010
REFERENCES
1. K.R.Gopalakrishna., “Engineering Drawing” (Vol I&II combined) Subhas Stores,
Bangalore, 2007
2. Luzzader, Warren.J., and Duff,John M.,,’’ Fundamentals of Engineering Drawing with
an introduction to Interactive Computer Graphics for Design and Production”, Eastern
Economy Edition, Prentice Hall of India Pvt Ltd, New Delhi, 2005
3. M.B.Shah and B.C.Rana, “Engineering Drawing”, Pearson, 2nd Edition, 2009
4. K.Venugopal and V.Prabhu Raja, “Engineering Graphics”, New Age International (P)
Limited ,2008.
5. K. V.Natrajan, “A text book of Engineering Graphics”, Dhanalakshmi Publishers,
18
Chennai, 2009.
6. Basant Agarwal and Agarwal C.M., “Engineering Drawing”, Tata McGraw Hill Publishing
Company Limited, New Delhi,2008.
PUBLICATION OF BUREAU OF INDIAN STANDARDS:

1. IS 10711 – 2001: Technical products Documentation – Size and lay out of drawing
sheets.
2. IS 9609 (Parts 0 & 1) – 2001: Technical products Documentation – Lettering.
3. IS 10714 (Part 20) – 2001 & SP 46 – 2003: Lines for technical drawings.
4. IS 11669 – 1986 & SP 46 – 2003: Dimensioning of Technical Drawings.
5. IS 15021 (Parts 1 to 4) – 2001: Technical drawings – Projection Methods.
SPECIAL POINTS APPLICABLE TO UNIVERSITY EXAMINATIONS ON ENGINEERING

GRAPHICS:
1. There will be five questions, each of either or type covering all units of the syllabus.
2. All questions will carry equal marks of 20 each making a total of 100.
3. The answer paper shall consist of drawing sheets of A3 size only. The students will be
permitted to use appropriate scale to fit solution within A3 size.
4. The examination will be conducted in appropriate sessions on the same day
19
PH8161 PHYSICS LABORATORY LT P C
(common to all branches of B.E./B.Tech. Programmes) 0021
OBJECTIVES:
 To introduce different experiments to test basic understanding of physics concepts
applied in optics, thermal physics, properties of matter and liquids.
1. Torsional pendulum Determination of rigidity modulus of wire and moment of

inertia of disc.
2. Non – uniform bending Determination of young’s modulus
3. Lee’s disc Determination of thermal conductivity of a bad conductor
4. Potentiometer Determination of thermo e.m.f. of thermocouple

5. Air wedge Determination of thickness of a thin sheet of paper
6. i. Optical fibre Determination of Numerical Aperture and acceptance angle
ii. Compact disc Determination of width of the groove using laser
7. Acoustic grating Determination of velocity of ultrasonic waves in liquids
8. Post office box Determination of Band gap of a semiconductor
9. Spectrometer Determination of wavelength using grating
10. Viscosity of liquids Determination of co-efficient of viscosity of a liquid by
Poiseuille’s flow
TOTAL : 30 PERIODS
OUTCOMES:
 The hands on exercises undergone by the students will help them to apply physics
principles of optics and thermal physics to evaluate engineering properties of materials.
20
CY8161 CHEMISTRY LABORATORY LTPC
(common to all branches of Engineering and Technology) 0021
OBJECTIVES:
 To make the student to acquire practical skills in the determination of water quality
parameters through volumetric and instrumental analysis.
 To acquaint the students with the determination of molecular weight of a polymer by
vacometry.
1. Estimation of HCI using Na2 CO3 as primary standard and Determination of alkalinity in
water sample.
2. Determination of total, temporary & permanent hardness of water by EDTA method.
3. Determination of DO content of water sample by Winkler’s method.
4. Determination of chloride content of water sample by argentometric method.
5. Estimation of copper content of the given solution by Iodometry.
6. Determination of strength of given hydrochloric acid using pH meter.
7. Determination of strength of acids in a mixture of acids using conductivity meter.
8. Estimation of iron content of the given solution using potentiometer.
9. Estimation of iron content of the water sample using spectrophotometer
(1,10- phenanthroline / thiocyanate method).
10. Estimation of sodium and potassium present in water using flame photometer.
11. Determination of molecular weight of poly vinyl alcohol using Ostwald viscometer.
12. Pseudo first order kinetics – ester hydrolysis.
13. Corrosion experiment – weight loss method.
14. Determination of CMC.
15. Phase change in a solid.
TOTAL: 30 PERIODS
OUTCOMES:
 The students will be outfitted with hands-on knowledge in the quantitative chemical
analysis of water quality related parameters.
REFERENCE BOOKS
1. A text of quantitative inorganic analysis, A. L. Vogel , ELBS London. 1995.
2. Experiments in physical chemistry, D.P. Shoemarker and C.W. Gardad, McGraw
Hill, London, 2001.
3. American Public Health Association.
21
GE8161 COMPUTER PRACTICES LABORATORY L T P C
0 0 3 2
OBJECTIVES:
The student should be made to:
 Be familiar with the use of Office software.
 Be exposed to presentation and visualization tools.
 Be exposed to problem solving techniques and flow charts.
 Be familiar with programming in C.
 Learn to use Arrays, strings, functions, structures and unions.
LIST OF EXPERIMENTS:
1. Search, generate, manipulate data using MS office/ Open Office
2. Presentation and Visualization – graphs, charts, 2D, 3D
3. Problem formulation, Problem Solving and Flowcharts
4. C Programming using Simple statements and expressions
5. Scientific problem solving using decision making and looping.
6. Simple programming for one dimensional and two dimensional arrays.
7. Solving problems using String functions
8. Programs with user defined functions
9. Program using Recursive Function and conversion from given program to flow chart.
10. Program using structures and unions.
TOTAL: 45 PERIODS
OUTCOMES:
 Apply good programming design methods for program development.

 Design and implement C programs for simple applications.
 Develop recursive programs.
GE8162 ENGINEERING PRACTICES LABORATORY LTPC

(Common to all Branches of B.E. / B.Tech. Programmes) 0 0 3 2
OBJECTIVES
 To provide exposure to the students with hands-on experience on various basic
engineering practices in Civil, Mechanical, Electrical and Electronics Engineering.
22
GROUP – A (CIVIL & ELECTRICAL)
1. CIVIL ENGINEERING PRACTICE 12
PLUMBING
Basic pipe connections involving the fittings like valves, taps, coupling, unions, reducers,
elbows and other components used in household fittings. Preparation of plumbing line
sketches.
Laying pipe connection to the suction side of a pump – inlet. Laying
pipe connection to the delivery side of a pump – out let.
Practice in mixed pipe connections: Metal, plastic and flexible pipes used in household
appliances.
WOOD WORK
Sawing, planning and making common joints: T-Joint, Mortise and Tennon joint,
Dovetail joint.
STUDY
Study of joints in door panels, wooden furniture
Study of common industrial trusses using models.
2. ELECTRICAL ENGINEERING PRACTICE 9
• Basic household wiring using switches, fuse, indicator – lamp etc.,

• Preparation of wiring diagrams
• Stair case light wiring
• Tube – light wiring
• Study of iron-box, fan with regulator, emergency lamp
GROUP – B (MECHANICAL AND ELECTRONICS) 15
3. MECHANICAL ENGINEERING PRACTICE
WELDING
• Arc welding of butt joints, lap joints, tee joints
• Gas welding Practice.
23
• Basic Machining
• Simple turning, drilling and tapping operations.
• Machine assembly Practice.
• Study and assembling the following:
Centrifugal pump, mixies and air conditioners.

• Demonstration on
(a) Smithy operations like the production of hexagonal bolt.
(b) Foundry operation like mould preparation for grooved pulley.
4. ELECTRONIC ENGINEERING PRACTICE 9
• Soldering simple electronic circuits and checking continuity.

• Assembling electronic components on a small PCB and testing.
• Study of Telephone, FM radio, low-voltage power supplies.
TOTAL: 45 PERIODS
OUTCOMES:
 ability to fabricate carpentry components and pipe connections including plumbing works.
 ability to use welding equipments to join the structures.
 ability to fabricate electrical and electronics circuits.
24
HS8251 TECHNICAL ENGLISH II L T P C
(For all branches of B.E / B.Tech programmes) 3 1 0 4
OBJECTIVES
• To make the students acquire listening and speaking skills meant for both formal and
informal contexts
• To help them develop their reading skills by exposing them to different types of
reading strategies
• To equip them with writing skills needed for academic as well as workplace situations
• To make them acquire language skills at their own pace by using e-materials and
language lab component
UNIT I 9+3
Listening - Listening to informal conversations and participating; Speaking - Opening
a conversation (greetings, comments on something, weather) - Turn taking - Closing a
conversation (excuses, general wish, positive comment, thanks); Reading - Developing
analytical skills, Deductive and inductive reasoning - Extensive reading; Writing - Effective
use of SMS for sending short notes and messages - Using ‘emoticons’ as symbols in email
messages; Grammar - Regular & irregular verbs - Active and passive voice; Vocabulary -
Homonyms (e.g. ‘can’) - Homophones (e.g. ‘some’, ‘sum’); E-materials - Interactive exercise
on Grammar and vocabulary – blogging; Language Lab - Listening to different types of
conversation and answering questions.
UNIT II 9+3
Listening - Listening to situation based dialogues; Speaking - Conversation practice in
real life situations, asking for directions (using polite expressions), giving directions (using
imperative sentences), Purchasing goods from a shop, Discussing various aspects of a film
(they have already seen) or a book (they have already read); Reading - Reading a short
story or an article from newspaper, Critical reading, Comprehension skills; Writing - Writing
a review / summary of a story / article, Personal letter (Inviting your friend to a function,
congratulating someone for his success, thanking one’s friend / relatives); Grammar - modal
verbs, Purpose expressions; Vocabulary - Phrasal verbs and their meanings, Using phrasal
verbs in sentences; E-materials - Interactive exercise on Grammar and vocabulary, Extensive
reading activity (reading stories / novels from links), Posting reviews in blogs - Language Lab
- Dialogues (Fill up exercises), Recording students’ dialogues.
25
UNIT III 9+3
Listening - Listening to the conversation - Understanding the structure of conversations;
Speaking - Conversation skills with a sense of stress, intonation, pronunciation and meaning
- Seeking information – expressing feelings (affection, anger, regret etc.); Reading - Speed
reading – reading passages with the time limit - Skimming; Writing - Minutes of meeting –
format and practice in the preparation of minutes - Writing summary after reading the articles
from the journals - Format for the journal articles – elements of technical articles (abstract,
introduction, methodology, results, discussion, conclusion, appendices, references) - Writing
strategies; Grammar - Conditional clauses - Cause and effect expressions; Vocabulary -
Words used as nouns and verbs without any change in the spelling (e.g. ‘rock’, ‘train’, ‘ring’);
E-materials - Interactive exercise on Grammar & vocabulary - Speed Reading practice
exercises; Language Lab - Intonation practice using EFLU materials – Attending a meeting
and writing minutes.
UNIT IV 9+3
Listening - Listening to a telephone conversation, Viewing a model interview (face-to-face,
telephonic and video conferencing) and observing the practices; Speaking - Role play practice
in telephone skills - listening and responding, -asking questions, -note taking – passing on
messages, Role play and mock interview for grasping the interview skills; Reading - Reading
the job advertisements and the profile of the company concerned – scanning; Writing -
Applying for a job – cover letter - résumé preparation – vision, mission and goals of the
candidate; Grammar - Numerical expressions - Connectives (discourse markers); Vocabulary
- Idioms and their meanings – using idioms in sentences; E-materials - Interactive exercises
on Grammar & Vocabulary - Different forms of résumés- Filling up a résumé / cover letter;
Language Lab - Telephonic interview – recording the responses - e-résumé writing.
UNIT V 9+3
Listening - Viewing a model group discussion and reviewing the performance of each
participant - Identifying the characteristics of a good listener; Speaking - Group discussion
skills – initiating the discussion – exchanging suggestions and proposals – expressing dissent/
agreement – assertiveness in expressing opinions – mind mapping technique; Reading - Note
making skills – making notes from books, or any form of written materials - Intensive reading
Writing - Types of reports – Feasibility / Project report – report format – recommendations /
suggestions – interpretation of data (using charts for effective presentation); Grammar - Use
of clauses; Vocabulary – Collocation; E-materials - Interactive grammar and vocabulary
exercises - Sample GD - Pictures for discussion, Interactive grammar and vocabulary
exercises - Pictures for discussion; Language Lab - Different models of group discussion
TOTAL : 60 PERIODS
26
OUTCOMES:
Learners should be able to
 speak convincingly, express their opinions clearly, initiate a discussion, negotiate, argue
using appropriate communicative strategies.
 write effectively and persuasively and produce different types of writing such as narration,
description, exposition and argument as well as creative, critical, analytical and evaluative
writing.
 read different genres of texts, infer implied meanings and critically analyse and evaluate
them for ideas as well as for method of presentation.
 listen/view and comprehend different spoken excerpts critically and infer unspoken and
implied meanings.
TEXT BOOKS
1. Mindscapes: English for Technologists and Engineers, Orient Black Swan, 2012 .
2. S.P. Dhanavel, English and Communication Skills for Students of Science and
Engineering. Orient Black Swan, Chennai, 2011.
REFERENCE BOOKS
1. Laws, Anne. Presentations. Hyderabad: Orient BlackSwan, 2000.
2. Lewis, Hedwig. Body Language: A Guide for Professionals. New Delhi: Sage
Publications, 1998.
3. Naterop, Jean B. and Rod Revell. Telephoning in English. Cambridge: Cambridge
University Press, 1987.
4. Rutherford, Andrea J. Basic Communication Skills for Technology. New Delhi:
Pearson Education, 2001.
5. Ur, Penny. Teaching Listening Comprehension. Cambridge: Cambridge University
Press, 1984.
EXTENSIVE READERS
1. Abdul Kalam, A P J. Ignited Minds: Unleashing the Power within India. New Delhi:
Penguin Books India, 2002.
2. Parameswaran, Uma. C.V.Raman: A Biography. New Delhi: Penguin Books India, 2011.
WEB RESOURCES
1. www.esl-lab.com
2. www.englishgrammar.org
3. www.englishclub.com
4. www.mindtools.com
5. www.esl.about.com
27
MA8251 MATHEMATICS II LT P C
3104
OBJECTIVES
• To make the student acquire sound knowledge of techniques in solving ordinary

differential equations that model engineering problems.
• To acquaint the student with the concepts of vector calculus, needed for problems in all
engineering disciplines.
• To develop an understanding of the standard techniques of complex variable theory so
as to enable the student to apply them with confidence, in application areas such as
heat conduction, elasticity, fluid dynamics and flow the of electric current.
• To make the student appreciate the purpose of using transforms to create a new domain
in which it is easier to handle the problem that is being investigated
UNIT I DIFFERENTIAL EQUATIONS 9+3
Method of variation of parameters – Method of undetermined coefficients – Homogenous

equation of Euler’s and Legendre’s type – System of simultaneous linear differential equations
with constant coefficients.
UNIT II VECTOR CALCULUS 9+3
Gradient and directional derivative – Divergence and Curl – Irrotational and Solenoidal vector
fields – Line integral over a plane curve – Surface integral and volume integral -Green’s,
Gauss divergence and Stoke’s theorems – Verification and application in evaluating line,
surface and volume integrals.
UNIT III ANALYTIC FUNCTION 9+3
Analytic functions – Necessary and sufficient conditions for analyticity - Properties – Harmonic
conjugates – Construction of analytic function - Conformal mapping – Mapping by functions w
z c, az, 1, z2 z - Bilinear transformation.
UNIT IV COMPLEX INTEGRATION 9+3
Line integral - Cauchy’s integral theorem – Cauchy’s integral formula – Taylor’s and Laurent’s
series – Singularities – Residues – Residue theorem – Application of residue theorem for
28
evaluation of real integrals – Use of circular contour and semicircular contour with no pole on
real axis.
UNIT V LAPLACE TRANSFORMS 9+3
Existence conditions – Transforms of elementary functions – Transform of unit step function

and unit impulse function – Basic properties – Shifting theorems –Transforms of derivatives
and integrals – Initial and final value theorems – Inverse transforms –Convolution theorem ––
Transform of periodic functions – Application to solution of linear ordinary differential equations
with constant coefficients.
TOTAL : 60 PERIODS
OUTCOMES:
 The subject helps the students to develop the fundamentals and basic concepts in
vector calculus, ODE, Laplace transform and complex functions. Students will be able
to solve problems related to engineering applications by using these techniques.
TEXT BOOKS:
1. Grewal B.S., “Higher Engineering Mathematics”, Khanna Publishers, New Delhi, 40th
Edition, 2007.
2. Ramana, B.V. “Higher Engineering Mathematics”, Tata McGraw Hill, New Delhi, 2010.
REFERENCES:
1. Glyn James, “Advanced Modern Engineering Mathematics”, Pearson
Education, New Delhi, 2007.
2. Jain R.K. and Iyengar S.R.K., “Advanced Engineering Mathematics”, Narosa
Publications, Delhi, 3rd Edition, 2007.
3. Bali N., Goyal M. and Watkins C., “Advanced Engineering Mathematics”, Firewall Media
(An imprint of Lakshmi Publications Pvt., Ltd.,), New Delhi, 7th Edition, 2009.
4. Peter V.O’Neil, Advanced Engineering Mathematics, Cengage Learning India Pvt.,
Ltd, New Delhi, 2007.
PH8252 PHYSICS FOR ELECTRONICS ENGINEERING LTP C

(Common to ECE, EEE and E& I Branches) 3 0 0 3
OBJECTIVE:
 To illustrate, with suitable examples, the concepts of conductors, semiconductors,
dielectric, magnetic and superconducting materials.
29
 To make the students familiarize with the optical properties of materials.
 To introduce the essential principles of physics for electronics and communication
engineering applications.
UNIT I ELECTRICAL PROPERTIES OF METALS 9
Classical theory: Drude model - thermal conductivity, thermal resistance - electrical

conductivity of nonmetals: semiconductors, ionic crystals and glasses - thin metal films:
conductivity and resistivity - Schrödinger wave equation - particle in a box - Tunneling
(qualitative) degenerate states - Fermi-Dirac statistics - density of states: electron
concentration and Fermi level - band theory of solids: energy band formation (qualitative) -
electron effective mass.
UNIT II SEMICONDUCTORS 9
Intrinsic semiconductors: energy band-diagram - direct and indirect band gap

semiconductors - carrier concentrations and conductivity - extrinsic semiconductors:
compensation doping - temperature dependence of conductivity - degenerate and
nondegenerate semiconductors - recombination and minority carrier injection: direct and
indirect recombination - minority carrier lifetime - diffusion and conduction equations and
random motion - optical absorption - Hall effect and devices - Ohmic contacts - Schottky
diode and solar cell.
UNIT III DIELECTRIC MATERIALS AND INSULATION 9
Matter polarization and relative permittivity: definition - dipole moment and polarization vector
P-polarization mechanisms: electronic, ionic, orientational, interfacial and total polarization
- frequency dependence - local field and Clausius-Mossetti equation - dielectric constant
and dielectric loss - Gauss’s law and boundary conditions - dielectric strength and insulation
break-down in gases, liquids and solids - capacitor materials - typical capacitor constructions
- piezoelectricity, ferroelectricity and pyroelectricity - quartz oscillators and filters - piezo and
pyroelectric crystals.
UNIT IV MAGNETIC PROPERTIES AND SUPERCONDUCTIVITY 9
Magnetic dipole moment - origin: atomic magnetic moments - magnetic materials:

diamagnetism, paramagnetism, ferromagnetism, antiferromagnetism, ferrimagnetism,
ferromagnetism - origin and the exchange interaction - saturation magnetization and Curie
temperature - ferromagnetic materials: magnetic domains magnetocrystalline anisotropy,
domain walls and motion - M versus H behaviour, demagnetization - soft and hard magnetic
materials - examples and uses - Giant Magneto Resistance and materials - superconductivity:
30
properties and classifications - High Tc superconductors - applications.
UNIT V OPTICAL PROPERTIES OF MATERIALS 9
Light waves in a homogeneous medium - refractive index - dispersion: refractive index-wave-

length behaviour - group velocity and group index - Fresnel’s equations: amplitude, reflection
and transmission coefficients, intensity, reflectance and transmittance - complex refractive
index and light absorption - Luminescence, phosphors and white LEDs - polarization - optical
anisotropy: uniaxial crystals, birefringence, dichroism - electro-optic effect and amplitude
modulators.
TOTAL : 45 PERIODS
OUTCOMES:
The student will be able to
 apply the electrical properties of matter while understanding the relevant electrical
phenomenon.
 apply the concepts of semi conductors and understand the working principle of all types
of semiconductor devices
 apply the concepts of dielectric materials and magnetic properties and understand the
electrostatic, electromagnetic, electromechanical behavior of equipments.
 apply the optical properties of materials and understand the electro optic effects.
TEXT BOOKS:
1. Kasap, S.O., Principles of Electronic Materials and Devices, Tata McGraw-Hill, 2007.
2. Palanisamy, P.K., Materials Science, Scitech, 2003
3. Rajendarn V and Marikani A, Materials Science, Tata McGraw Hill, 2006
REFERENCES:
1. Kittel, C., Introduction to Solid State Physics, John Wiley, 1996.
2. James F.Shackelford, Introduction to Materials Science for Engineers, Pearson, 2010.
CY8252 CHEMISTRY FOR ELECTRICAL AND ELECTRONICS ENGINEERING LTPC

(Common to Electrical and Electronics engineering, Electronics 3003
and Instrumentation )
AIM:
To impart knowledge in the Applied Chemistry topics relevant to electrical and electronics
engineering.
OBJECTIVES:
• To know about the electrochemistry and it is applications.
31
• To understand the basic concepts about the batteries.
• Importance of Conductivity in Solids and specialty polymers.
• Treatment of water for domestic and industrial purpose.
• Familiarize with various type of material analysis.
UNIT I ELECTROCHEMISTRY 9
Electrical conductance- Types of electrode- conductivity of solutions of electrolytes- specific
conductance- equivalent conductance- molar conductance- ionic conductance- factors
affecting conductance- transport (transference) number- inter ionic attraction theory of
conductance. Electrochemical cell - redox reaction, electrode potential- origin of electrode
potential- oxidation potential- reduction potential- standard electrode potential(Eo), Nernst
equation, Measurement of EMF of the cell - EMF and potential difference- potentiometric
measurement. Reference electrodes. Standard hydrogen electrodes- calomel, silver-silver
chloride and glass electrodes. Single electrode potential. Measurement and applications-
electrochemical series. Determination of pH using glass electrode. Concentration cells- types
and applications.
UNIT II ENERGY SOURCES 9

Introduction- nuclear energy- nuclear fission- controlled nuclear fission- nuclear fusion-
differences between nuclear fission and fusion- nuclear chain reactions- nuclear reactor
power generator- classification of nuclear reactor- components of a reactor- light water
reactor- breeder reactor- solar energy conversion- solar cells- wind energy. Batteries and fuel
cells. Introduction- batteries- types of batteries- alkaline battery- lead storage battery- nickel-
cadmium battery- lithium battery- fuel cell H –O 2
fuel
2
cell- applications.
UNIT III CONDUCTIVITY IN SOLIDS AND SPECIALTY POLYMERS 9

Electrical properties of solids- band theory of solids- types of energy bands- application of
band theory to solids- semiconductors- types-n and p types- super conductors. Classification
of insulating materials based on function and physical state- thermal insulators- optical fibers-
organic electronic materials- fullerenes. Introduction to thermoplastics and thermosetting
plastics- phenolic and epoxy resins, silicone polymers, rubbers; polyelectrolytes, electrically
conducting polymers, polymers with piezoelectric, pyroelectric and ferroelectric properties,
photonic polymers, photo resists, basics of LCD and LED.
UNIT IV WATER CHEMISTRY 9

Boiler feed water-requirements-formation of deposits in steam boilers and heat exchangers-
disadvantages (wastage of fuels, decrease in efficiency, boiler explosion) prevention of scale
formation-external treatment (ion exchange method) - internal treatment-(phosphate, calgon,
carbonate, colloidal)-boiler compounds-caustic embrittlement-boiler corrosion-priming and
foaming- desalination of brackish water –reverse osmosis.
32
UNIT V ANALYSIS OF MATERIALS 9
Spectroscopic analyses: principle- instrumentation- block diagram-data analysis and
applications of Atomic Absorption Spectroscopy, Flame photometry, Microscopic
analyses: Scanning Electron Microscopy, Tunneling Electron Microscopy, Scanning
Tunneling Microscopy and Atomic Force Microscopy. Thermal methods: Differential
Scanning Colorimetry, Thermo- gravimetric analysis.
TOTAL : 45 PERIODS
OUTCOMES:
 The knowledge gained on analysis materials, polymers, energy sources and water
treatment techniques will facilitate better understanding of engineering processes and
applications for further learning.
TEXT BOOKS
1 Jain P.C. & Monica Jain., “Engineering Chemistry”, DhanpatRai Publishing Company
(P) Ltd, New Delhi, 2010.
2 Kannan P., Ravikrishnan A., “Engineering Chemistry”, Sri Krishna Hitech Publishing
Company Pvt. Ltd. Chennai, 2009
REFERENCE BOOKS
1 Pahari A., Chauhan B., “Engineering Chemistry”., Firewall Media., New Delhi., 2010.\
2 Sivasankar B., “Engineering Chemistry”, Tata McGraw-Hill Publishing Company Ltd.,
New Delhi, 2008.
3 Ashima Srivastava.,Janhavi N N., Concepts of Engineering Chemistry”., ACME
Learning Private Limited., New Delhi., 2010.
4 Vairam S., Kalyani P., Suba Ramesh., “Engineering Chemistry”., Wiley India Pvt Ltd.,
New Delhi., 2011.
EI8201 ELECTRIC CIRCUITS LT P C

3 0 0 3
OBJECTIVES
 analyze simple DC circuits using systemic analysis techniques (basic law).
 apply Thevenin’s theorem, Norton’s theorem and the superposition theorem to aid
circuit analysis.
33
 AC steady-state circuit concepts (impedance, reactance, etc) and perform AC steady
state analysis.
 perform DC and AC steady-state power calculations.
 learn the concepts of three phase circuits.
UNIT I D.C. CIRCUIT ANALYSIS 9
Ohm’s law – Ideal voltage and current sources – Independent sources – Dependent sources
– Circuit elements – Kirchhoff’s Laws – Voltage and Current division in series and parallel
circuits, Network reduction – Mesh and Nodal analysis with voltage and current sources –
Circuit theorems:- Superposition, Thevenin’s, Norton’s, Reciprocity and Maximum Power
Transfer – Source transformation – Υ-Δ transformation .
UNIT II A.C.CIRCUIT FUNDAMENTALS AND ANALYSIS 10
Sinusoidal voltage and current – RMS value – Form factor – Phasor representation of
sinusoidal of voltages –Current and Voltage relationship in R, L, and C circuits – Impedance
and admittance, power factor concepts in RC, RL and RLC circuits – Impedance combinations
– Real power, reactive power, complex power, apparent power – Analysis of simple series and
parallel circuits .
UNIT III RESONANCE AND COUPLED CIRCUITS 9
Resonance in parallel and series circuits – Half power frequencies – Bandwidth and Q factor of
Resonant circuits – Mutual Inductance – Dot convention – Coefficient of coupling – Sinusoidal
steady state analysis of network with coupled inductance .
UNIT IV THREE-PHASE CIRCUIT ANALYSIS 8

Three-phase balanced and unbalanced voltage sources – Three - phase balanced and
unbalanced loads – Line voltage and Phase voltage – Phasor diagram and Power in three -
phase circuit – Three - phase circuit analysis with star and delta balanced and unbalanced
loads – Phasor diagram – Power and power factor measurement in three-phase circuits.
UNIT V TRANSIENT ANALYSIS OF FIRST AND SECOND ORDER LINEAR CIRCUITS 9

Source free RC and RL Circuit responses – Step response of RC and RL circuits – source free
RLC series and parallel circuit responses – Step responses of RLC series and parallel circuits
– Responses of RC, RL and RLC series circuits to sinusoidal excitation.
TOTAL : 45 PERIODS
34
OUTCOMES:
 systematically obtain the equations that characterize the performance of an
electric circuit as well as solving both single phase and three-phase circuits in sinusoidal
steady state.
TEXT BOOKS
1. Edminister, J.A. and Nahvi, M., “Electric Circuits”, 4th Edition, Schaum’s Outline series,
McGraw-Hill, 2002.
2. Husain, A., “Networks and Systems”, Khanna Publishers, 2000.
REFERENCE BOOKS
1. Boylsted, R.L., “Essentials of Circuit Analysis”, Prentice Hall, 2003.
2. HAYT, Jr.W.H., Kemmerly, J.E., and Durbin, S.M., “Engineering Circuit Analysis”, Tata
McGraw-Hill, 2002.
3. Alexander, C.K., Matthew, N.O., and Sadiku, “Fundamentals of Electric Circuits”, Tata
McGraw- Hill, 2003.
4. Decarlo, R.A. and Lin, P.M., “Linear Circuit Analysis”, Oxford University Press, 2001.
EI8202 ELECTRONIC DEVICES, CIRCUITS AND APPLICATION LTPC

3 00 3
OBJECTIVES:
 understand principle of current flow through the p-n junction and relating this
phenomena they will be taught to characterise and operate diodes, bipolar and field-
effect transistors.
 learn the function and application of the diodes, bipolar junction and field effect
transistors in electronic circuits.
 gain knowledge about the operation of multistage and differential amplifiers.
 design and analyse feedback amplifiers and oscillators.
UNIT I PN JUNCTION DEVICES 9
Semiconductor conductivity - drift current and diffusion current - PN junction - barrier voltage -
diode equation - diffusion and transition capacitance - Application of diode as rectifier, clipper
and clamper. Special devices and applications, Zener diode as voltage regulator, Schottky
diodes for high speed switching, UJT relaxation oscillator, Thyristors - SCR , Diac and Triac.
35
UNIT II BIPOLAR JUNCTION TRANSISTORS AND APPLICATIONS 9
BJT operation – Characteristics and h-parameters for CE, CB, CC configurations - Design of
biasing circuits – Small signal model - High frequency model – Gain-Bandwidth product – CE,
CB and CC amplifiers – Transistor Switching circuits.
UNIT III JFET, MOSFET AND THEIR APPLICATIONS 9
JFET and MOSFET device structure and current equation - Equivalent circuit – Biasing – CS,
CG and CD amplifiers. Frequency response of CS amplifier – NMOS and CMOS inverter.
UNIT IV MULTISTAGE AMPLIFIERS AND DIFFERENTIAL AMPLIFIER 9
BJT cascaded amplifiers - Single and double tuned amplifiers – gain and frequency response
– BJT and FET Differential amplifiers – common mode and difference mode analysis.
UNIT V FEEDBACK AMPLIFIERS AND OSCILLATORS 9
Advantages of negative feedback – Feedback amplifiers with voltage / current sampling and
series / shunt mixing – Positive feedback – Condition for oscillations – Phase shift, Wien
bridge, Hartley, Colpitts and Crystal oscillators.
(Practice Tutorial Problems for all the above topics.)
TOTAL : 45 PERIODS
OUTCOMES:
 apply basic concepts of common semiconductor devices and electronic circuits for an
application. The students will be capable to learn how to analyse simple but important
applications of these devices in electronic circuits.
TEXT BOOKS
1. David A. Bell ,Electronic Devices and Circuits, Oxford University Press, 2010.
2. Sedra and Smith, Microelectronic Circuits, Oxford University Press, 2004.
REFERENCES
1. Jacob Millman, Christos c. Halkias and Satyabrata Jit, Millman’s Electronic Devices
and Circuits, Third edition, Tata McGraw Hill, 2010.
36
EI8211 COMPUTER PRACTICE II LTPC
0032
OBJECTIVES
 To introduce various programs included in office suite to the students so that they can
make use of the same for producing documents, present and visualize data using work
sheets.
 To make them learn C programming language.
1. Shell Commands, Wild Cards, Escaping and Redirection.

2. Pipes, Tees and Command Substitution.
3. Shell Variables, Simple program using Shell Scripting.
4. Shell Programs using Loops.
5. Simple Shell Programs using File I/O.
6. Advanced Shell Programs using File I/O.
7. Directories and inodes.
8. Simple programs using classes for understanding objects, member
function, constructions and destructors.
9. Programs using operator overloading including unary operators, new and delete
10. Programs using inheritance concepts
11. Programs using virtual functions and dynamic polymorphism
12. Programs using templates.
TOTAL : 45 PERIODS
OUTCOMES:
 Use any office suite
 Use spreadsheets for presentations of data
 Use spreadsheets to produce visualizations
 Write simple C programs using various constructs
 Improve upon it for developing programs of moderate complexity
37
EI8212 ELECTRON DEVICES AND ELECTRIC CIRCUITS LABORATORY LTP C
00 3 2
OBJECTIVES :
 learn and to verify circuit theorems.
 analyse the frequency response of series and parallel resonance circuits.
 study the characteristics of ordinary and special diodes.
 design and understand the operation and characteristics of different transistor
configurations.
LIST OF EXPERIMENTS
1. Verification of KVL and KCL
2. Verification of Thevenin and Norton Theorems.
3. Verification of superposition Theorem.
4. Verification of Maximum power transfer and reciprocity theorems.
5. Frequency response of series and parallel resonance circuits.
6. Characteristics of PN and Zener diode
7. Characteristics of CE configuration
8. Characteristics of CB configuration
9. Characteristics of UJT and SCR
10. Characteristics of JFET and MOSFET
11. Characteristics of Diac and Triac.
12. Characteristics of Photodiode and Phototransistor.
TOTAL : 45 PERIODS
OUTCOMES:
 Design and construct simple electronic circuits to accomplish a specific function, e.g.,
designing amplifiers, ADC converters etc.
 make decisions regarding their best utilization in a specific situation.
38
MA8357 TRANSFORM TECHNIQUES AND PARTIAL LT P C
DIFFERENTIAL EQUATIONS 3104
OBJECTIVES
• To introduce the effective mathematical tools for the solutions of partial differential
equations that model physical processes;
• To introduce Fourier series analysis which is central to many applications in engineering
apart from its use in solving boundary value problems;
• To acquaint the student with Fourier transform techniques used in wide variety of
situations in which the functions used are not periodic;
• To develop Z- transform techniques which will perform the same task for discrete time
systems as Laplace Transform, a valuable aid in analysis of continuous time systems
UNIT I PARTIAL DIFFERENTIAL EQUATIONS 9+3
Formation – Solutions of first order equations – Standard types and Equations reducible to
standard types – Singular solutions – Lagrange’s Linear equation – Integral surface passing
through a given curve – Classification of Partial Differential Equations - Solution of linear
equations of higher order with constant coefficients – Linear non-homogeneous PDE.
UNIT II FOURIER SERIES 9+3
Dirichlet’s conditions – General Fourier series – Odd and even functions – Half-range Sine
and Cosine series – Complex form of Fourier series – Parseval’s identity –Harmonic Analysis.
UNIT III APPLICATIONS OF PARTIAL DIFFERENTIAL EQUATION 9+3
Method of separation of Variables – Solutions of one dimensional wave equation and one-
dimensional heat equation – Steady state solution of two-dimensional heat equation – Fourier
series solutions in Cartesian coordinates.
UNIT IV FOURIER TRANSFORM 9+3
Fourier integral theorem – Fourier transform pair-Sine and Cosine transforms Properties –
Transform of elementary functions – Convolution theorem – Parseval’s identity.
39
UNIT V Z – TRANSFORM AND DIFFERENCE EQUATIONS 9+3
Z-transform – Elementary properties – Inverse Z-transform – Convolution theorem Initial and

Final value theorems – Formation of difference equation – Solution of difference equation
using Z-transform.
TOTAL : 60 PERIODS
OUTCOMES:
 The understanding of the mathematical principles on transforms and partial differential
equations would provide them the ability to formulate and solve some of the physical
problems of engineering.
TEXT BOOK:
1. Grewal B.S., “Higher Engineering Mathematics”, Khanna Publishers, New Delhi, 40th
Edition, 2007.
REFERENCES:
1. Glyn James, “Advanced Modern Engineering Mathematics”, Pearson Education, New
Delhi, 2007.
2. Ramana, B.V. “Higher Engineering Mathematics”, Tata McGraw Hill, New Delhi, 11th
Reprint , 2010.
3. Bali N., Goyal M. and Watkins C., “Advanced Engineering Mathematics”,Firewall Media
(An imprint of Lakshmi Publications Pvt., Ltd.,), New Delhi, 7th Edition, 2009.
4. Peter V.O’Neil, Advanced Engineering Mathematics, Cengage Learning India Pvt., Ltd,
New Delhi, 2007.
GE8351 ENVIRONMENTAL SCIENCE AND ENGINEERING LT P C

3 0 0 3
OBJECTIVES:
 To study the nature and facts about environment.
 To finding and implementing scientific, technological, economic and political solutions to
environmental problems.
 To study the interrelationship between living organism and environment.
 To appreciate the importance of environment by assessing its impact on the human world;
envision the surrounding environment, its functions and its value.
40
 To study the dynamic processes and understand the features of the earth‟s interior and
surface.
 To study the integrated themes and biodiversity, natural resources, pollution control and
waste management.
UNIT I ENVIRONMENT, ECOSYSTEMS AND BIODIVERSITY 14
Definition, scope and importance of environment – need for public awareness - concept
of an ecosystem – structure and function of an ecosystem – producers, consumers and
decomposers – energy flow in the ecosystem – ecological succession – food chains, food
webs and ecological pyramids – Introduction, types, characteristic features, structure and
function of the (a) forest ecosystem (b) grassland ecosystem (c) desert ecosystem (d) aquatic
ecosystems (ponds, streams, lakes, rivers, oceans, estuaries) – Introduction to biodiversity
definition: genetic, species and ecosystem diversity – biogeographical classification of India
– value of biodiversity: consumptive use, productive use, social, ethical, aesthetic and option
values – Biodiversity at global, national and local levels – India as a mega-diversity nation –
hot-spots of biodiversity – threats to biodiversity: habitat loss, poaching of wildlife, man-wildlife
conflicts – endangered and endemic species of India – conservation of biodiversity: In-situ
and ex-situ conservation of biodiversity.
Field study of common plants, insects, birds
Field study of simple ecosystems – pond, river, hill slopes, etc.
UNIT II ENVIRONMENTAL POLLUTION 8
Definition – causes, effects and control measures of: (a) Air pollution (b) Water pollution (c)
Soil pollution (d) Marine pollution (e) Noise pollution (f) Thermal pollution (g) Nuclear hazards
– soil waste management: causes, effects and control measures of municipal solid wastes –
role of an individual in prevention of pollution – pollution case studies – disaster management:
floods, earthquake, cyclone and landslides.
Field study of local polluted site – Urban / Rural / Industrial / Agricultural.
UNIT III NATURAL RESOURCES 10
Forest resources: Use and over-exploitation, deforestation, case studies- timber extraction, mining,
dams and their effects on forests and tribal people – Water resources: Use and over-utilization of
surface and ground water, floods, drought, conflicts over water, dams-benefits and problems –
Mineral resources: Use and exploitation, environmental effects of extracting and using mineral
resources, case studies – Food resources: World food problems, changes caused by agriculture
and overgrazing, effects of modern agriculture, fertilizer-pesticide problems, water logging, salinity,
41
case studies – Energy resources: Growing energy needs, renewable and non renewable energy
sources, use of alternate energy sources. case studies – Land resources: Land as a resource,
land degradation, man induced landslides, soil erosion and desertification – role of an individual in
conservation of natural resources – Equitable use of resources for sustainable lifestyles.
Field study of local area to document environmental assets – river / forest / grassland / hill /
mountain.
UNIT IV SOCIAL ISSUES AND THE ENVIRONMENT 7
From unsustainable to sustainable development – urban problems related to energy –

water conservation, rain water harvesting, watershed management – resettlement and
rehabilitation of people; its problems and concerns, case studies – role of non-governmental
organization- environmental ethics: Issues and possible solutions – climate change, global
warming, acid rain, ozone layer depletion, nuclear accidents and holocaust, case studies.
– wasteland reclamation – consumerism and waste products – environment production act
– Air (Prevention and Control of Pollution) act – Water (Prevention and control of Pollution)
act – Wildlife protection act – Forest conservation act – enforcement machinery involved in
environmental legislation- central and state pollution control boards- Public awareness.
UNIT V HUMAN POPULATION AND THE ENVIRONMENT 6
Population growth, variation among nations – population explosion – family welfare programme
– environment and human health – human rights – value education – HIV / AIDS – women and
child welfare – role of information technology in environment and human health – Case studies.
TOTAL : 45 PERIODS
OUTCOMES:
 Environmental Pollution or problems cannot be solved by mere laws. Public
participation is an important aspect which serves the environmental Protection. One
will obtain knowledge on the following after completing the course.
 Public awareness of environmental is at infant stage.
 Ignorance and incomplete knowledge has lead to misconceptions
 Development and improvement in std. of living has lead to serious environmental
disasters
TEXT BOOKS
1. Gilbert M.Masters, ‘Introduction to Environmental Engineering and Science’, 2nd edition,
Pearson Education (2004).
2. Benny Joseph, ‘Environmental Science and Engineering’, Tata McGraw-Hill, New Delhi,
(2006).
42
REFERENCE BOOKS
1. R.K. Trivedi, ‘Handbook of Environmental Laws, Rules, Guidelines, Compliances and
Standards’, Vol. I and II, Enviro Media.
2. Cunningham, W.P. Cooper, T.H. Gorhani, ‘Environmental Encyclopedia’,Jaic Publ.,
House, Mumbai, 2001.
3. Dharmendra S. Sengar, ‘Environmental law’, Prentice hall of India PVTLTD,New Delhi,
2007.
4. Rajagopalan, R, ‘Environmental Studies-From Crisis to Cure’, Oxford University Press
(2005)
EI8301 ELECTRICAL AND ELECTRONIC MEASUREMENTS LTPC

300 3
OBJECTIVES :
 analyze the electric circuits using network theorems.
 learn the fundamentals of AC circuits like RL,RC and RLC circuits.
 Gain knowledge on Resonance theory and magnetic coupling.
 Study about poly phase circuits.
UNIT I MEASUREMENT OF ELECTRICAL PARAMETERS 9
Types of ammeters and voltmeters – PMMC Instruments, Moving Iron Instruments

Dynamometer type Instruments, Resistance measurement - Wheatstone bridge,Kelvin double
bridge and Direct deflection methods, Measurement of Inductance - Maxwell Wein bridge,
Hay’s bridge and Anderson bridge, Measurement of Capacitance - Schering bridge
UNIT II POWER AND ENERGY MEASUREMENTS 9
Electrodynamic type wattmeter – theory and its errors; LPF wattmeter, Phantom loading,
Single phase Induction type energy meter theory and Adjustments, Calibration of wattmeter
and Energy meters.
UNIT III POTENTIOMETERS AND INSTRUMENT TRANSFORMERS 9

Student type potentiometer, Precision potentiometer, A.C. Potentiometers – Polar and Co-
43
ordinate types – Applications, Instrument Transformer - Construction and theory of Current
Transformers and Potential Transformers.
UNIT IV ANALOG AND DIGITAL INSTRUMENTS 10
Wave analyzers, Signal and function generators, Distortion factor meter, Q meter, Digital
voltmeter and multimeter, DMM with auto ranging and self diagnostic features, Frequency
measurement.
UNIT V DISPLAY AND RECORDING DEVICES 8
Cathode ray oscilloscope - Sampling and storage scopes –Seven segment and dot matrix
displays, X-Y recorders, Magnetic tape recorders, Data loggers.
TOTAL: 45 PERIODS
OUTCOMES:
 understand the working principle of all types of common electrical and electronic
instruments.
 Gain knowledge on analog and digital instruments.
 understand the different types of display and recording devices.
TEXT BOOKS:
1. A.K. Sawhney, A Course in Electrical & Electronic Measurements & Instrumentation,
Dhanpat Rai and Co, New Delhi, 2010
2. R.B. Northrop, Introduction to Instrumentation and Measurements,Taylor & Francis,
New Delhi, 2008
3. J.J. Carr, Elements of Electronic Instrumentation and Measurement, Pearson Education
India, New Delhi, 2011
4. H.S. Kalsi, Electronic Instrumentation, Tata McGraw-Hill, New Delhi, 2010
REFERENCES:
1. Bell, A.D., “Electronic Instrumentation and Measurements”, 2nd Edition, Prentice Hall of
India, New Delhi, New Delhi, 2003.
2. Bowens, A. J, “Digital Instrumentation”, 4th Edition, Tata McGraw - Hill India Ltd., 1997.
44
EI8302 ELECTRICAL MACHINES LTPC
3003
OBJECTIVES :

 study about the construction and working principle of DC machines, AC Machines,
transformers, synchronous machines and induction machines.
 learn the procedure for selecting machines for different applications.
UNIT I D.C. MACHINES 9
Construction of D.C. Machines, Principle of operation of D.C. generator, EMF equation,

Characteristics of D.C. generators, Armature reaction, Commutation. Principle of operation of
D.C. motor, Types, Torque equation, Characteristics, Starters, Speed control of D.C. motors.
UNIT II TRANSFORMERS 9
Principle, Theory of ideal transformer, EMF equation, Construction details of shell and core
type transformers, Tests on transformers, Equivalent circuit, Phasor diagram, Regulation
and efficiency of a transformer. Introduction to three, phase transformer connections.
UNIT III SYNCHRONOUS MACHINES 9
Alternator - Construction and principle of operations Equation of induced EMF and Vector
Diagram-Voltage regulation; Synchronous motor - Starting methods, Torque, V -curves, Speed
control and Hunting.
UNIT IV INDUCTION MACHINES 9
Induction motor, Construction and principle of operation, Classification of induction Motor,

Torque equation,Condition for maximum torque, Equivalent Circuit, Power losses, Efficiency,
Starting methods and Speed control.
UNIT V SPECIAL MACHINES 9
Types of single phase motor, Double revolving field theory, Cross field theory, Capacitor start
45
capacitor run motors, Shaded pole motor, Repulsion type motor, Universal motor, Hysterisis
motor, Permanent magnet synchronous motor, Switched reluctance motor, Brushless D.C
motor.
TOTAL: 45 PERIODS
OUTCOMES:
 gain knowledge about the construction, working principle and applications of DC
machines, AC machines and special machines.
TEXT BOOKS:
1. Nagrath, I.J., and Kothari, D.P., “ Electrical Machines”, Tata McGraw - Hill, 1997.
2. Fitzgerald A.E, Kingsley C., Umans, S. and Umans S.D., “Electric Machinery”, McGraw
- Hill, Singapore, 2000.
REFERENCE BOOKS:
1. Theraja, B.L., “A Text book of Electrical Technology”, Vol.II, S.C Chandand Co., New
Delhi, 2007.
2. Del Toro, V., “Electrical Engineering Fundamentals”, Prentice Hall of India, New Delhi,
1995.
3. Cotton, H., “Advanced Electrical Technology”, Sir Isaac Pitman and SonsLtd., London,
1999.
EI8303 OPERATIONAL AMPLIFIERS AND LINEAR LTPC

INTEGRATED CIRCUITS 300 3
OBJECTIVES:
 study the fundamentals of integrated circuit’s fabrication and operation.
 learn the functions of linear and non-linear integrated circuits for specific applications.
 understand the operation of special function integrated circuits for Instrumentation and
process control applications.
 get knowledge about the different types of A/D and D/A converters.
 gain knowledge on design and analysis of linear and non linear circuits using
operational amplifiers.
46
UNIT I FABRICATION OF IC AND OP-AMP SPECIFICATIONS 9
IC classification - fundamentals of monolithic IC technology - epitaxial growth, masking and

etching, diffusion of impurities- Realization of monolithic ICs and packaging-
Fabrication of diodes, capacitance, resistance - Operational amplifiers, specifications,
frequency compensation - slew rate and methods of improving slew rate.
UNIT II APPLICATIONS OF OPERATIONAL AMPLIFIERS 9
Linear and Nonlinear Circuits using operational amplifiers and their analysis - Inverting and
Non inverting Amplifiers - Differentiator - Integrator - Voltage to Current converter -
Instrumentation amplifier - Sine wave Oscillators - Low pass and band pass filters -
Comparator - Multivibrator and Schmitt trigger - Triangular wave generator - Precision
rectifier - Log and Antilog amplifiers - Non-linear function generator. Practice tutorial
problems.
UNIT III ANALOG MULTIPLIER AND PLL 9
Analysis of four quadrant and variable transconductance multipliers - Voltage

controlled Oscillator - Closed loop analysis of PLL, AM, PM and FSK modulators and
demodulators.
UNIT IV ANALOG TO DIGITAL AND DIGITAL TO ANALOG CONVERTORS 9
Analog switches - High speed sample and hold circuits and sample and hold IC’s - Types
of D/A converter - Current driven DAC - Switches for DAC - A/D converter, Flash, Single
slope, Dual slope, Successive approximation - DM and ADM converters.
UNIT V SPECIAL FUNCTION IC’S 9
Timers - Voltage regulators - linear and switched mode types - Switched capacitor filter -
Frequency to Voltage converters - Tuned amplifiers - Power amplifiers - Isolation Amplifiers -
Opto couplers.
TOTAL : 45 PERIODS
OUTCOMES:
 understand the fundamentals of integrated circuit’s fabrication and operation.
 apply the concepts of special function integrated circuits for Instrumentation and
process control applications and concepts of different types of A/D and D/A converters.
47
TEXT BOOK:
1. D.Roy Choudhery,Sheil B.Jain, Linear Integrated Circuits, 2nd Edition, New Age
Publishers, 2003.
REFERENCES:
1. Ramakant A. Gayakwad, Op - Amp and Linear IC’s, Prentice Hall, 2000.
2. Robert F.Coughlin and Ferderick F. Driscoll, Operational Amplifiers and Linear Integrated
Circuits, Prentice Hall of India, 2001.
3. David A Bell, Op-amp and Linear ICs, Second Edition, Prentice Hall of India, 1997.
EI8304 TRANSDUCER ENGINEERING L T P C

3 0 0 3
OBJECTIVES :
 study about the concepts of measurement, error and uncertainty.
 gain knowledge on the static and dynamic characteristics of measuring instruments.
 Learn about the principle, operation and characteristics of different variable resistance
transducers.
 understand the principle of operation and characteristics of different variable inductance
transducers
 develop knowledge on operation and applications of piezo electric and Hall effect transducers.
UNIT I SCIENCE OF MEASUREMENTS AND CLASSIFICATION OF TRANSDUCERS 9
Units and standards – Calibration methods – Static calibration – Classification of errors -

Limiting error and probable error – Error analysis – Statistical methods – Odds and uncertainty
– Classification of transducers – Selection of transducers.
UNIT II CHARACTERISTICS OF TRANSDUCERS 9
Static characteristics – Accuracy, precision, resolution, sensitivity, linearity, span and range
-Dynamic characteristics – Mathematical model of transducer – Zero, I and II order transducers
- Response to impulse, step, ramp and sinusoidal inputs.
UNIT III. VARIABLE RESISTANCE TRANSDUCERS 9
Principle of operation, construction details, characteristics and applications of potentiometer,

strain gauge, resistance thermometer, Thermistor, hot-wire anemometer, piezoresistive
48
sensor and humidity sensor.
UNIT IV VARIABLE INDUCTANCE AND VARIABLE CAPACITANCE TRANSDUCERS 9
Induction potentiometer – Variable reluctance transducers – EI pick up – Principle of operation,

construction details, characteristics and applications of LVDT –Capacitive transducer and
types – Capacitor microphone – Frequency response.
UNIT V OTHER TRANSDUCERS 9
Piezoelectric transducer - Hall Effect transducer – Magneto elastic sensor- Digital transducers
– Smart sensors - Fibre optic sensors, SQUID sensors, Film sensors, MEMS – Nano sensors.
TOTAL : 45 PERIODS
OUTCOMES:
 understand the concepts of measurement, error and uncertainty .
 know the principle of operation and characteristics of different types of transducers.
TEXT BOOKS:
1. Neubert H.K.P., Instrument Transducers – An Introduction to their Performance and
Design, Oxford University Press, Cambridge, 2003.
2. Doebelin E.O. and Manik D.N., Measurement Systems – Applications and Design,
Special Indian Edition, Tata McGraw Hill Education Pvt. Ltd., 2007.
REFERENCE BOOKS:
1. D. Patranabis, Sensors and Transducers, 2nd edition, Prentice Hall of India, 2010. E.A.
2. John P.Bentley, Principles of Measurement Systems, III Edition, Pearson Education, 2000.
3. Murthy, D.V.S., Transducers and Instrumentation, 2nd Edition, Prentice Hall of India Pvt.
4. W.Bolton, Engineering Science, Elsevier Newnes, Fifth edition, 2006.
EI8311 ELECTRICAL MACHINES LABORATORY L T P C

0 0 3 2
OBJECTIVES :
 understand the procedure to obtain the characteristics of DC and AC machines with
49
and without load.
1. Open circuit and load characteristic of DC Shunt Generator.

2. Speed control of DC Shunt Motor.
3. Load test on DC Shunt Motor.
4. Load test on DC Series Motor.
5. Regulation of three - phase Alternator.
6. Predetermination of efficiency and regulation of Single - phase Transformer.
7. Load test on Single - phase Transformer
8. Load test on Three - phase Induction Motor.
9. Load test on Single - phase Induction Motor.
10. ‘V’ curves of Synchronous Motor.
TOTAL : 45 PERIODS
OUTCOMES:
 know about the characteristics of DC and AC machines with and without load.
EI8312 TRANSDUCERS AND MEASUREMENT LABORATORY LTPC

0032
OBJECTIVES :
 know the procedure to obtain the static and dynamic characteristics of various types of
transducers.
 study the procedure to measure unknown resistance, inductance and capacitance using
bridge circuits.
 gain knowledge to calibrate electrical instruments.
 learn about the flapper nozzle system.
1. Characterisation of loading effect on Potentiometer.

2. Dynamic characteristics of various types of Thermocouple with and without thermo
wells.
50
3. Design of cold junction compensation for Thermocouples.
4. Static and Dynamic characteristics of RTD and lead wire compensations.
5. Static characteristic of Thermistor and its linearization.
6. Static characteristic of LVDT and null voltage compensation.
7. Calibration of Strain Gauge type force and torque transducers.
8. Calibration of magnetic and photoelectric type velocity transducers.
9. Static characteristic of flapper-nozzle system.
10. Characteristics of Synchros.
11. Study of Capacitive transducer.
12. Calibration of vibration sensor.
13. Design of signal conditioning circuits and PC interfacing.
14. Wheatstone and Kelvin’s bridge for measurement of resistance.
15. Schering Bridge for capacitance measurement and Anderson Bridge for inductance
measurement.
16. Calibration of Energymeter.
17. Calibration of Voltmeter and Ammeter using potentiometer
TOTAL : 45 PERIODS
OUTCOMES :
 obtain the static and dynamic characteristics of various types of transducers.
 measure unknown resistance, inductance and capacitance using bridge circuits.
 calibrate electrical instruments.
MA8353 NUMERICAL METHODS LT P C

31 04
OBJECTIVES
• To provide the mathematical foundations of numerical techniques for solving linear
system, eigenvalue problems, interpolation, numerical differentiation and integration
and the errors associated with them;
• To demonstrate the utility of numerical techniques of ordinary and partial differential
equations in solving engineering problems where analytical solutions are not readily
available.
51
UNIT I SOLUTION OF EQUATIONS AND EIGENVALUE PROBLEMS 9+3
Solution of algebraic and transcendental equations - Fixed point iteration method – Newton-
Raphson method- Solution of linear system of equations - Gauss Elimination method –
Pivoting - Gauss-Jordan methods – Iterative methods of Gauss-Jacobi and Gauss-Seidel
- Matrix Inversion by Gauss-Jordan method – Eigen values of a matrix by Power method and
by Jacobi’s method.
UNIT II INTERPOLATION AND APPROXIMATION 9+3
Interpolation with unequal intervals - Lagrange interpolation – Newton’s divided difference

interpolation – Cubic Splines - Interpolation with equal intervals - Newton’s forward and
backward difference formulae – Least square method - Linear curve fitting.
UNIT III NUMERICAL DIFFERENTATION AND INTEGRATION 9+3
Approximation of derivatives using interpolation polynomials - Numerical integration using

Trapezoidal, Simpson’s 1/3 and Simpson’s 3/8 rules – Romberg’s method – Two point and
three point Gaussian quadrature formulae – Evaluation of double integrals by Trapezoidal and
Simpson’s rules.
UNIT IV INITIAL VALUE PROBLEMS FOR ORDINARY DIFFERENTIAL EQUATIONS 9+3
Single step-methods - Taylor’s series method - Euler’s method - Modified Euler’s method - Fourth
order Runge - Kutta method for solving first and second order equations - Multi-step methods -
Milne’s and Adams-Bash forth predictor-corrector methods for solving first order equations.
UNIT V BOUNDARY VALUE PROBLEMS IN ORDINARY AND PARTIAL

DIFFERENTIAL EQUATIONS 9+3
Finite difference methods for solving two-point linear boundary value problems. Finite
difference techniques for the solution of two dimensional Laplace’s and Poisson’s equations
on rectangular domain – One dimensional heat-flow equation by explicit and implicit (Crank-
Nicholson) methods - One dimensional wave equation by explicit method.
TOTAL: 60 PERIODS
OUTCOMES:
 Able to have a clear perception of the power of numerical techniques, ideas and to
demonstrate the applications of these techniques to problems drawn from industry,
management and other engineering fields.
52
TEXT BOOKS:
1. Grewal, B.S. and Grewal,J.S.,“ Numerical methods in Engineering and Science”,
Khanna Publishers, New Delhi, 9th Edition, 2011.
2. Sankara Rao, K. “Numerical methods for Scientists and Engineers’, Prentice Hall of
India Private Ltd., New Delhi, 3rd Edition,2007.
REFERENCES:
1. Brian Bradie, “A Friendly Introduction to Numerical Analysis”, Pearson Education Asia,
New Delhi, 1st Edition, 2007.
2. Gerald, C.F. and Wheatley, P.O., “Applied Numerical Analysis”, Pearson Education Asia,
New Delhi, 6th Edition, 2006.
3. Laurene V. Fausett, “Applied Numerical Analysis using MATLAB”, Pearson Education,
New Delhi, 1st print, 2nd Edition, 2009.
EI8401 CONTROL ENGINEERING LT PC

3 00 3
OBJECTIVES :
 gain knowledge about the different methods of representation of systems,their transfer
function models and state space models.
 develop state space models of selective systems.
 learn about the time response of systems subjected to different test inputs and the
associated steady state/dynamic errors.
 understand the open loop and closed loop frequency responses of systems, and analyze
the stability and performance.
 Know about the concept of stability of control systems and methods of stability analysis
using root locus approach and Routh-Hurwitz criterion.
 Know and practically implement the procedure to design lag, lead and lag-lead
compensators for a control system.
Control System-Open and Closed Loop-Effect of Feedback-System representations-Transfer

functions, Block diagrams, signal flow graphs, gain formula of Mechanical and Electrical Systems.
53
UNIT II STATE VARIABLE MODEL AND ANALYSIS 9
State variable Formulation – solution - state transition matrix – eigen values – eigenvectors
-controllability - observability.
UNIT II TRANSFER FUNCTION MODEL AND ANALYSIS 9
Time response – damping ratio- natural frequency – effects of adding poles and zeros –
dominant poles- Stability – Routh’s Hurwitz criterion – Root locus plots of typical systems –
Root locus analysis.
UNIT IV FREQUENCY DOMAIN ANALYSIS OF TRANSFER FUNCTION MODELS 9

Frequency response – resonance peak – Bandwith – effect of adding poles and zeros –
Magnitude and phase plots of typical systems– Gain margin – Phase margin-Bode plot–
Nyquist’s stability criterion
UNIT V DESIGN OF CONTROL SYSTEMS 9
Design Specification – controller configurations – PID controller – Lag-Lead, Lag & Lead
Compensator-Design using Rootlocus technique.
TOTAL : 45 PERIODS
OUTCOMES:
 apply concepts of Linear control theory and design for a system.
TEXT BOOKS:
1. Benjamin C.Kuo, “Automatic Control Systems”, PHI Learning Private Ltd, 2010
2. I.J.Nagrath, M.Gopal, Control Systems Engineering, New Age International Publishers
Reprint 2008.
REFERENCES:
1. Richard C.Dorf Robert H.Bishop, “Modern Control Systems”, Education Pearson, Third
Impression 2009.
2. John J.D’Azzo Constantine H.Houpis Stuart N.Sheldon, “Linear Control System Analysis
and Design with MATLAB” CRC Taylor & Francis Reprint 2009.
3. Katsuhiko Ogata, “Modern Control Engineering”, PHI Learning Private Ltd, 5th Edition,
2010
54
EI8402 DIGITAL LOGIC THEORY L T P C
3 0 0 3
OBJECTIVES :
 gain knowledge on implementation of logic circuits using gates.
 understand the basic concepts of Boolean algebra and combinational circuits.
 learn about the operation of flip flops and will be able to design a synchronous and
asynchronous sequential circuits.
 study the basic concepts of state machine diagrams and its applications.
 Get exposure on programmable logic devices and VHDL programming.
UNIT I BOOLEAN ALGEBRA AND COMBINATIONAL CIRCUITS 9
Boolean algebra - De-Morgan’s theorem - switching functions and simplification using K-maps
method- Design of combinational circuits - adder, subtractor, comparators, code converters,
encoders, decoders, multiplexers and demultiplexers. Logic families - TTL and ECL. MOSFET
logic –NMOS and CMOS.
UNIT II SYNCHRONOUS SEQUENTIAL CIRCUITS 9
Flip flops - SR, D, JK , and T flip flops - Semiconductor Memories - Analysis and design of
synchronous sequential circuits – Counters, Shift registers - state diagram - state reduction
- state assignment .
UNIT III ASYNCHRONOUS SEQUENCTIAL CIRCUITS 9
Analysis of asynchronous sequential circuits - state assignment - asynchronous

design problems.
UNIT IV ALGORITHMIC STATE MACHINE 9
ASM Chart - Data path Subsystem - Control subsystem - Design examples- Binary
multiplier, Weighing machine and Waveform generator.
UNIT V PROGRAMMABLE LOGIC DEVICES AND VHDL 9
ROM, PROM, EPROM, PLA, PLD, FPGA, VHDL : RTL Design – combinational logic – Types
55
– Operators – Packages – Sequential circuit – Sub programs – Test benches (Examples:
adders, counters, flipflops, FSM, Multiplexers / Demultiplexers).
TOTAL : 45 PERIODS
OUTCOMES:
 gain knowledge on the fundamental concepts and design of digital systems.
 Learn the function of flip flops and able to design a synchronous and asynchronous
sequential circuits.
 understand programmable logic devices and VHDL programming.
ME8403 FUNDAMENTALS OF THERMODYNAMICS AND L T PC

FLUID MECHANICS 3104
OBJECTIVES :
 study the basic laws of thermodynamics, laws and methodologies for the analysis of gas
turbines and compressors.
 Learn about the basic steaming process of boilers, Air conditioning and different modes of
heat transfer.
 gain knowledge on the basic concepts of fluid mechanics.
 understand of the construction and working principle of pumps and hydraulic turbines.
UNIT I LAWS OF THERMODYNAMICS AND BASIC IC ENGINE CYCLES 15
Systems zeroth law, first law of thermodynamics – concept of internal energy and enthalpy
56
applications to closed and open systems – second law of thermodynamics – concept of
entropy – clausius inequality and principles of increase in irreversible processes.Basic IC
engine and gas turbine cycles-- single and multistage reciprocating compressors.
UNIT II THERMODYNAMICS OF REFRIGERATORS AND PUMPS 12
Properties of steam – Ranking cycle—Boilers and its accessories– Basic thermodynamics of

refrigerators and heat pumps.-Basics of Heat transfer
UNIT III BASIC CONCEPT OF FLUID MECHANICS &FLOW OF FLUIDS 12
Introduction – classification – types of fluids – properties – laws of pressure – atmospheric,

gauge, absolute pressure, pressure measurement – manometers – mechanical gauges.
Types of fluid flow – velocity – rate equation of continuity – energy of a liquid in motion – head
of a liquid – Bernoulli’s theorem – orifice and mouthpiece.
UNIT IV DIMENSIONAL AND MODEL ANALYSIS 9
Introduction – dimensions – dimensional analyses – Rayleigh’s and Buckingham’s method

- similitude - dimensionless numbers and their significance – similarity laws – model
studies.
UNIT V PUMPS AND TURBINES 12
Introduction – types of pumps – reciprocating pump – construction details – co-efficient of

discharge – slip – power required – centrifugal pump – classification – working principle –
specific speed – turbines– classification – working principle.
TOTAL : 60 PERIODS
OUTCOMES:
 understand the basic laws of thermodynamics, laws and apply it to various applications.
 know basic concepts of fluid mechanics.
 Know the construction and working principle of pumps and hydraulic turbines.
TEXT BOOKS
1. Nag, P.K., Engineering Thermodynamics, Tata McGraw-Hill Co. Ltd., 2007.
2. BANSAL.R.K,’Fluid Mechanics and Hydraulic Machines’, Laxmi Publications’ (P Ltd, 2005
57
REFERENCES
1. Reynolds, Thermodynamics, Int. Student Edition, McGraw-Hill Co. Ltd., 1990
2. Ramalingam.K.K.” Thermodynamics”, Sci-Tech Publications, 2006
3 Holman.J.P, 3rd Ed, McGraw-Hill,2007
4. Shames, I.H., ‘Mechanics of fluids’, Kogakusha, Tokyo, 1998.
5. Kumar, K.L., ‘Fluid Mechanics’, Eurasia publishers, 1990
6. Radhakrishnan, E., ‘Introduction to fluid Mechanics’, Prentice Hall, India 2005.
7. Rajput R.K., ‘Fluid Mechanics and Hydraulic Machines’, S.Chand and Co., India 1998.
EI8404 INDUSTRIAL INSTRUMENTATION I LT P C

3 0 0 3
OBJECTIVES :
 understand the construction and working of instruments used for measurement of force,
torque, velocity, acceleration, vibration and density.
 study about the different types of pressure measurement techniques.
 learn the concept of calibration of instruments used for temperature and pressure
measurement.
 gain knowledge on the design signal conditioning circuits and compensation schemes for
temperature measuring instruments.
 learn how to select the instruments according to a specific application.
UNIT I MEASUREMENT OF FORCE, TORQUE AND SPEED 9
Electric balance - Different types of load cells - Hydraulic, Pneumatic, strain gauge-
Magnetoelastic and Piezoelectric load cells, Different methods of torque measurement; Strain
gauge, Relative angular twist, Speed measurement-Capacitive tacho, Drag cup type tacho-
D.C and A.C tacho generators, Stroboscope.
UNIT II MEASUREMENT OF ACCELERATION, VIBRATION AND DENSITY 9
Accelerometers - LVDT, Piezoelectric, Strain gauge and Variable reluctance type accelerometers
- Mechanical type vibration instruments, Seismic instruments as accelerometer, Vibration
sensor, Calibration of vibration pickups, Units of density and specific gravity, Baume scale and
API scale, Pressure type densitometers - Float type densitometers, Ultrasonic densitometer,
gas densitometer.
58
UNIT III PRESSURE MEASUREMENT 9
Units of pressure, Manometers, different types, Elastic type pressure gauges, Bourdon tube,
bellows and diaphragms, Electrical methods - Elastic elements with LVDT and strain gauges,
Capacitive type pressure gauge, Piezo resistive pressure sensor, Resonator pressure sensor,
Measurement of vacuum-McLeod gauge, Thermal conductivity gauge, lonization gauges, Cold
cathode type and hot cathode type, calibration of pressure gauges, Dead weight tester.
UNIT IV TEMPERATURE MEASUREMENT - I 9
Definitions and standards - Primary and secondary fixed points - Calibration of thermometers,
Different types of filled in system thermometers - Sources of errors in, filled in systems and
their compensation, Bimetallic thermometers, RTD - characteristics and signal conditioning-
3 lead and 4 lead RTDs - Thermistors.
UNIT V TEMPERATURE MEASUREMENT - II 9
Thermocouples - Laws of thermocouple, Fabrication of industrial thermocouples, Signal

conditioning for thermocouple, isothermal block reference junctions, Commercial circuits for
cold junction compensation, Response of thermocouple, Special techniques for measuring
high temperature using thermocouple, Radiation fundamentals, Radiation methods of
temperature measurement, Total radiation pyrometers, Optical pyrometers, Two colour
radiation pyrometers - Fiber optic sensor for temperature measurement.
TOTAL : 45 PERIODS
OUTCOMES:
 understand the construction and working of instruments used for
measurement of force, torque, velocity, acceleration, vibration and density, temperature
and pressure.
 select instruments according to the application.
TEXT BOOKS
1. Doebellin, E.O.and Manik D.N.,Measurement systems Application and Design, Special
Indian Edition, Tata McGraw Hill Education Pvt.Ltd,2007
2. Jones.B.E, Instrument Technology, Vol.2, Butterworth-Heinemann, International Edition,
2003.
59
REFERENCE BOOKS
1. Liptak, B.G., Instrumentation Engineers Handbook (Measurement), CRC Press, 2005
2. Patranabis,D., Principles of Industrial Instrumentation, 3rd Edition, Tata McGraw Hill
Publishing Company Ltd., New Delhi, 2010.
3. Eckman D.P., Industrial Instrumentation, Wiley Eastern Limited, 1990.
EI8405 MICROPROCESSOR, MICROCONTROLLER LT PC

AND APPLICATIONS 30 0 3
OBJECTIVES :
 know architecture of 8085,8086 Microprocessors and 8051 microcontroller.
 learn assembly language programming in 8085,8086 Microprocessors and 8051
microcontroller.
 understand the concept about peripherals and their interfacing with Microprocessors and
microcontrollers.
 Gain knowledge on Microcontroller based systems for industrial applications.
UNIT I 8085 PROCESSOR 9
Evolution of Microprocessors - Introduction to 8085 – Signals - Architecture - Addressing

Modes –- Instruction format –Instruction set –Assembly Language Programming -Counters
and Time delays - Interrupts - Timing diagrams - Memory and I/O Interfacing.
UNIT II 8086 PROCESSOR 9
Introduction to 8086 - Architecture –Maximum mode - Minimum mode - Addressing Modes

- Instruction format - Instruction set – Assembly Language Programming – Interrupt system -
Memory and I/O interfacing - Strings - procedures and Macros.
UNIT III PERIPHERAL INTERFACING 9

Programmable Peripheral Interface (8255) - keyboard display controller (8279) – ADC - DAC
Interface - Programmable Timer Controller (8254) - Programmable interrupt controller (8259)
60
- Serial Communication Interface (8251)- DMA Controller(8257).
UNIT IV MICROCONTROLLER 9
8051 Microcontroller- Architecture - Instruction Set –Addressing modes –Interrupts - Assembly
Language Programming - Programming 8051 Timers- Serial Port Programming - Interrupts
Programming - 8051 Programming in C.
UNIT V MICRO CONTROLLER BASED SYSTEM DESIGN 9

LCD & Keyboard Interfacing- Interfacing with 8255 - ADC, DAC interfacing - External Memory
interfacing - I2C Standard- Motor Control- Relay – PWM - DC & Stepper Motor - Design of
traffic light control and Washing machine control.
TOTAL : 45 PERIODS
OUTCOMES:
 know architecture and development of assembly language programming of 8085,8086
Microprocessors and 8051 micro controller.
 Apply knowledge on Microcontroller based systems for industrial applications.
TEXTBOOKS
1. Ramesh S. Gaonkar, Microprocessor Architecture Programming and Applications with
8085. Fourth edition, Penram International Publishing 2006.
2. Douglas V.Hall, Microprocessor and Interfacing, Programming and Hardware. Revised
second Edition, Indian edition 2007. Tata McGraw Hill
3. MuhammadAli Mazidi, Janice Gillispie Mazidi, Rolin D.MCKinlay The 8051 Microcontroller
and Embedded Systems, Second Edition, Pearson Education 2008.
REFERENCES
1. Krishna Kant, Microprocessor and Microcontroller Architecture, programming and
system design using 8085, 8086, 8051 and 8096, PHI, 2007.
2. N.Senthil Kumar, M.Saravanan, S.Jeevananthan, Microprocessors and
Microcontrollers, Oxford University Press, 2010.
3. A.K. Ray, K.M .Bhurchandi Advanced Microprocessor and Peripherals, Tata McGraw-
Hill, 2007.
4. Kenneth J.Ayala., The 8051 Microcontroller, 3rd Edition, Thompson Delmar Learning,
2007.
61
EI8411 LINEAR AND DIGITAL INTEGRATED CIRCUITS LT P C
LABORATORY 00 3 2
OBJECTIVES :
 know the procedure to design and implement linear and non-linear circuits using linear
ICs.
 gain knowledge on design and verification of combinational and sequential logic
circuits.
 understand VHDL programming.
LINEAR IC APPLICATIONS
1. Comparator.
2. Differentiator and Integrator.
3. Adder and Subtractor.
4. Clipper and clamper.
5. Peak detector.
6. Timer IC Application.
7. VCO and PLL.
8. One experiment beyond the syllabus.
DIGITAL EXPERIMENTS
1. Verification of truth table for AND, OR, EXOR, NOT, NOR, NAND gates, JK, RS,
D flip-flops
2. Implementation of Boolean functions
3. Combinational logic design: Adder, Subtractor,
4. Code converters, Encoder and Decoder.
5. Sequential logic design: Counters (Synchronous and Asynchronous),
6. Shift registers.
7. Simulation experiments: Design of Adder and counter using VHDL.
8. One experiment beyond the syllabus.
62
TOTAL : 45 PERIODS
OUTCOMES:

 design and implement linear and non-linear circuits using linear ICs.
 design and verify combinational and sequential logic circuits and get familiarized with
VHDL programming.
EI8412 MICROPROCESSOR, MICROCONTROLLER AND LT P C

APPLICATIONS LABORATORY 003 2
OBJECTIVES :
 Learn assembly level programs in 8085 and 8086 Microprocessors and 8051
microcontroller.
 know the procedure for Interfacing of peripheral devices such as PPI, Timer, ADC/ DAC
with microprocessor and microcontroller.
 understand 8085/8255/8051 simulation software.
 gain knowledge on implementation of microprocessor based applications such as of
Stepper Motor Controller, Traffic Light Controller, PID controller and Data Acquisition
System
8085 BASED EXPERIMENTS:

1. Assembly Language programming of 8085. (i. Addition, ii. Subtraction, iii. Multiplication,
iv. Division, v. Sorting, vi. Searching)
2. Interfacing experiments (with 8279, 8255, 8251, ADC, DAC, Traffic Light and Stepper
motor)

1. Programming using Arithmetic, logical and Bit Manipulation instructions of
8051 microcontroller.
2. Programming and Verifying Timer, Interrupts and UART operations in microcontroller.
3. Interfacing ADC and DAC.
4. Interfacing (16X2) LCD Display.
5. Temperature measurement.
63
6. DC motor speed control.

1. Programs for 16 bit Arithmetic, Sorting, Searching and String operations.
2. Macro assembler Programming for 8086. (Simulator)
TOTAL : 45 PERIODS
OUTCOMES:
 write and debug assembly level programs in 8085 and 8086 Microprocessors and 8051
microcontroller.
 use 8085/8255/8051 simulation software.
 design and implement the microprocessor based applications such as of Stepper
Motor Controller, Traffic Light Controller, PID controller and Data Acquisition System
EI8501 INDUSTRIAL INSTRUMENTATION II LTPC

300 3
OBJECTIVES :
 learn the construction, installation and working of different variable
head type flow meters.
 Know about the construction, working and calibration of different quantity flow meters,
variable area flow meters and mass flow meters.
 gain knowledge about the construction, installation and working of electrical type,
open channel and solid flow meters.
 Understand the principle, operation and application of different level measuring
instruments.
 learn the principle and operation of viscosity, humidity and moisture measurement.
UNIT I VARIABLE HEAD TYPE FLOWMETERS 9
Expression for flow rate through restriction (compressible and incompressible flow) - Orifice
plate – different types of orifice plates – Cd variation – pressure tappings – Venturi tube –
Flow nozzle – Dall tube – Elbow taps - Pitot tube – combined pitot tube - averaging pitot
tube – installation and applications of head flow meters
UNIT II QUANTITY METERS, AREA FLOW METERS AND MASS FLOW METERS 9
Positive displacement flow meters – Nutating disc, Reciprocating piston and Oval gear flow
64
meters – Inferential meter – Turbine flow meter – Variable Area flow meter – Rotameter –
theory, characteristics, installation and applications – Mass flow meter – Angular momentum
– Thermal, Coriolis type mass flow meters – Calibration of flow meters – Dynamic weighing
method
UNIT III ELECTRICAL TYPE FLOW METERS 9

Principle and constructional details of Electromagnetic flow meter – Ultrasonic flow meters –
Laser Doppler anemometer – Vortex shedding flow meter – Target flow meter – Guidelines
for selection of flow meter – Open channel flow measurement – Solid flow rate measurement.
UNIT IV LEVEL MEASUREMENT 9
Level measurement – Float gauges - Displacer type – D/P method - Bubbler system - Load cell
– Electrical types:– Conductivity sensors – Capacitive sensors – Nucleonic gauge - Ultrasonic
gauge – Boiler drum level measurement:– Differential pressure and Hydrastep methods -
Solid level measurement.
UNIT V MEASUREMENT OF VISCOSITY, HUMIDITY AND MOISTURE 9
Viscosity:– Saybolt viscometer - Rotameter type and Torque type viscometers – Consistency
meters–Humidity:- Dry and wet bulb psychrometers – Resistive and capacitive type
hygrometers – Dew cell – Commercial type dew meter – Moisture: - Different methods of
moisture measurements – Thermal and Distillation methods- Conductivity and Capacitive
sensors-Microwave, IR and NMR sensors-Application of moisture measurement Moisture
measurement in solids.
TOTAL: 45 PERIODS
OUTCOMES:
 understand the construction, installation and working of different variable
head type flow meters.
 analyze the different level measuring instruments and gain knowledge about the
principles of viscosity, humidity and moisture measurement.
TEXT BOOKS
1. Doebelin, E.O.and Manik,D.N., Measurement Systems Application and Design, Special
Indian Edition, Tata McGraw Hill Education Pvt.Ltd.,2007.
2. Patranabis,D. Principles of Industrial Instrumentation, 3rd Edition, Tata McGraw Hill, New
Delhi, 2010.
65
REFERENCE BOOKS
1. Liptak, B.G., Instrumentation Engineers Handbook (Measurement), CRC Press,2005
2. Singh,S.K., Industrial Instrumentation and Control, Tata McGrawHill Education Pvt. Ltd.,
New Delhi,2009.
3. Jain, R.K., Mechanical and Industrial Measurements, Khanna Publishers, Delhi, 1999.
EI8502 PRINCIPLES OF COMMUNICATION ENGINEERING LTPC

3 0 03
OBJECTIVES :
 learn the basic concept of Amplitude and Angle Modulation.
 Gain knowledge about different pulse modulation and Demodulation techniques.
 Study about the digital modulation techniques and evaluate the error probability.
 gain knowledge on various modes of communication systems.
UNIT I AMPLITUDE MODULATION 9

Basic principle of AM – Frequency spectrum and Bandwidth, Modulation index, AM power
distribution and AM modulator circuits. AM transmitters. Low level transmitters and High
level transmitters AM reception: AM Receivers, Tuned Radio Frequency receivers, Super-
heterodyne receivers and Double conversion AM receivers.
UNIT II ANGLE MODULATION 9

FM and PM waveforms, Frequency deviation, Phase deviation and Modulation index,
Frequency spectrum of Angle modulated wave - Phase and Frequency modulator and
demodulator, Direct FM transmitter, Indirect transmitters, Angle modulation versus Amplitude
modulation, FM receivers and Frequency versus Phase Modulation.
UNIT III PULSE COMMUNICATION 9
Pulse Amplitude Modulation, Pulse Position Modulation, Pulse Width Modulation, Pulse
Code Modulation, Delta Modulation, Differential Pulse Code Modulation, Merits and
demerits. Concept of multiplexing:- Frequency Division Multiplexing and Time Division
Multiplexing.
UNIT IV DATA TRANSMISSION 9
Base band signal receiver:- Error probability, Optimum and matched filter techniques and
66
Coherent reception. Digital modulation systems:- Amplitude Shift Keying, Frequency Shift
Keying and Phase Shift Keying, Comparison of data transmission systems.
UNIT V COMMUNICATION SYSTEMS 9
Introduction - Optical Communication System - Microwave communication system - Satellite

Communication System. Television:- Scanning methods, B/W and colour systems – Camera
and Picture tubes, Synchronization, Transmitters and Receivers.
TOTAL : 45 PERIODS
OUTCOMES:
 understand the basic concept of Amplitude and Angle Modulation.
 gain knowledge on various modes of communication systems.
TEXT BOOKS
1. Singh, R.P. and Sapre, S.D., “Analog and Digital Communication Systems”,
McGraw- Hill Publishing Company Ltd., 2003.
2. Kennedy, G., “Electronic Communication Systems”, McGraw-Hill, 4th Edition, 2003.
3. Gulati, R.P., “Modern Television Practice Principles, Technology and Servicing”, New
Age International Pvt. Ltd., 2002.
REFERENCE BOOKS
1. Taub and Schilling, “Principles of Communication Systems”, 2nd Edition, McGraw-Hill,
1986.
2. Haykins, S., “Communication Systems”, 4th Edition, John Wiley Inc., 2000.
3. Carlson, A.B., “Communication Systems”, 3rd Edition, Tata McGraw- Hill, 2001.
EI8503 PRINCIPLES OF DIGITAL SIGNAL PROCESSING LT PC

3 0 0 3
OBJECTIVES :
 gain knowledge on continuous/Discrete time signals and systems.
 Understand different sampling techniques and effects of quantization.
 gain knowledge on discrete and fast Fourier transform algorithms and their
applications.
 learn the concepts of IIR and FIR filters.
67
UNIT I CONTINUOUS SIGNALS AND SYSTEMS 9
Classification of systems - Continuous, linear, time invariant, causal, stable systems -

classification of signals - continuous , energy and power signals; mathematical
representation of signals; spectra of standard signals.
UNIT II SAMPLING AND QUANTIZATION 9

Sampling techniques - Quantization - Quantization error - Nyquist rate - Aliasing effect –
Digital signal representation - Truncation - Overflow errors in numerical computation -
Interpolation.
UNIT III DISCRETE TIME SIGNALS AND SYSTEMS 9
Discrete Time system - Discrete linear and circular convolutions - Difference equations and
solutions - Z-transform - Inverse Z-transforms - Stability of discrete time system- Frequency
response – Standard discrete time signals and DTFT.
UNIT IV DISCRETE FOURIER TRANSFORM & FFT 9
DFT properties, magnitude and phase representation - Direct computation of DFT, FFT
- Radix 2 - DIT & DIF algorithms - Convolution - Application using FFT – Power spectrum.
UNIT V DESIGN OF DIGITAL FILTERS 9
Butterworth approximation - Butterworth IIR lowpass digital filter using impulse invariant
and bilinear transformation - FIR filters - linear phase filters - window design technique –
Rectangular, Hamming Hanning and Kaiser windows – realization structures.
TOTAL: 45 PERIODS
OUTCOMES:
 analyze continuous/Discrete time signals and systems.
 Apply discrete and fast Fourier transform algorithms and understand the concepts of
IIR and FIR filters.
TEXT BOOKS
1. Johonny R.Johnson, Introduction to Digital Signal Processing, Prentice Hall of India,
2009.
2. Tarun Kumar Rawat, Signals and Systems, Oxford University Press, 2010.
68
REFERENCES
1. J.G.Proakis and D.G.Manolakis, Digital Signal Processing Principles, Algorithms and
Applications, Pearson Education, New Delhi, 2003 / PHI.
2. S.K. Mitra, Digital Signal Processing – A Computer Based Approach’, Tata McGraw Hill,
2001.
3. John P.Uyemura, A first course in Digital System Design An integrated approach,
Cengage Learning, 2000.
4. S.Salivahanan, A.Vallavaraj, C.Gnanapriya, Digital Signal Processing, Tata McGraw
Hill, 2010.
5. Alan V. Oppenheim, Ronald W. Schafer and John R.Buck, Discrete-Time Signal
Processing Pearson Education, New Delhi, 2003.
69
EI8504 PROCESS CONTROL LTP C
3 0 0 3
OBJECTIVES :
 develop the skills for obtaining the mathematical model of processes.
 analyze the dynamic model of different processes and to understand the difference
between lumped and distributed parameter models.
 Know about the different control action and their relative merits, demerits and
applications.
 gain knowledge on the construction, operation, characteristics and selection of control
valves.
 learn the different tuning methods for PID controllers.
 Develop knowledge about the different multi loop control schemes and their applications.
UNIT I PROCESS DYNAMICS 9
Need for process control – Mathematical model of Flow, Level, Pressure and Thermal
processes – Interacting and non-interacting systems – Degrees of freedom – Continuous and
batch processes – Self regulation – Servo and regulatory operations – Lumped and Distributed
parameter models – Heat exchanger – CSTR – Linearization of nonlinear systems.
UNIT II CONTROL ACTIONS 9
Characteristic of on-off, proportional, single speed floating, integral and derivative controllers
– P+I, P+D and P+I+D control modes – Electronic PID controller – Auto/manual transfer -
Reset windup – Practical forms of PID Controller.
UNIT III FINAL CONTROL ELEMENTS 9
I/P converter - Pneumatic and electric actuators – Valve Positioner – Control Valves –
Characteristic of Control Valves:- Inherent and Installed characteristics – Modeling of pneumatic
control valve – Valve body:-Commercial valve bodies – Control valve sizing – Cavitation and
flashing – Selection criteria.
UNIT IV CONTROLLER TUNING 9

Evaluation criteria – IAE, ISE, ITAE and ¼ decay ratio - Tuning:- Process reaction curve
method, Continuous cycling method and Damped oscillation method – Determination of
optimum settings for mathematically described processes using time response and frequency
response approaches –Auto tuning.
70
UNIT V MULTILOOP CONTROL 9
Feed-forward control – Ratio control – Cascade control – Inferential control – Split-range and
introduction to multivariable control – Examples from distillation column and boiler systems –
IMC– Model Predictive Control – Adaptive control – P&ID diagram.
TOTAL : 45 PERIODS
OUTCOMES:
 know about process dynamics, PID controllers and its tuning
 Gain knowledge about the construction, operation, characteristics and selection of
control valves.
 Get familiarized with different multi loop control schemes and their applications.
TEXT BOOKS:
1. Bequette, B.W., “Process Control Modeling, Design and Simulation”, Prentice Hall of
India, 2004.
2. Stephanopoulos, G., “Chemical Process Control - An Introduction to Theory and
Practice”, Prentice Hall of India, 2005.
REFERENCE BOOKS:
1. Seborg, D.E., Edgar, T.F. and Mellichamp, D.A., “Proces Dynamics and Control”, Wiley
John and Sons, 2nd Edition, 2003.
2 Coughanowr, D.R., “Process Systems Analysis and Control”, McGraw - Hill International
Edition, 2004.
EI8511 INDUSTRIAL INSTRUMENTATION LABORATORY LT PC

0 032
OBJECTIVES :
 gain knowledge on the measuring instruments for accurate measure of process
variables(flow, level, temperature, viscosity and pressure)
 get understanding about the usage of various types of analytical instruments such as
pH, Conductivity, UV absorbance and transmittance.
 Learn about the calibration of Bio-medical measuring instruments.
1. Discharge coefficient of orifice plate

2. Calibration of pressure gauge
71
3. Torque measurement
4. Viscosity measurement
5. Vacuum pressure measurement
6. Level measurement using d/p transmitter
7. UV – Visible spectrophotometer
8. IR spectrophotometer
9. pH meter standardization and measurement of pH values of solutions
10. Measurements of conductivity of test solutions.
11. ECG measurement
12. Pulse rate measurement
13. One or two experiments beyond syllabus
TOTAL : 45 PERIODS
OUTCOMES:
 effectively use the measuring instruments for accurate measure of process
variables(flow, level, temperature, viscosity and pressure) and Bio-medical measuring
instruments using calibrators
 Get familiarized with the usage of various types of analytical instruments such as pH,
conductivity, UV absorbance and transmittance.
EI8512 PROCESS CONTROL LABORATORY LTPC

00 3 2
OBJECTIVES :
 Learn the procedure for obtaining the servo and regulatory responses of process control
loops such as level, pressure, flow and temperature.
 understand the procedure for obtaining the optimum controller settings using various
tuning methods by experimental and mathematically described processes.
 learn and analyze the control schemes for multiloop processes such as three tank and
four tank systems.
LIST OF EXPERIMENTS
1. Study of Process Control Training Plant and Compact Flow Control Unit.
2. Characteristics of Pneumatically Actuated Control Valve (with and without Positioner).
72
3. Level Control and Pressure Control in Process Control Training Plant.
4. Design of ON/OFF Controller for the Temperature Process.
5. PID Implementation Issues.
6. Tuning of PID Controller for mathematically described processes
7. PID Enhancements ( Cascade and Feed-forward Control Schemes)
8. Design and Implementation of Multi-loop PI Controller on the Three-tank system.
9. Analysis of Multi-input Multi-output system (Four-tank System).
10. Study of AC and DC drives.
11. Study of pH Control Test Rig.
12. Auto-tuning of PID Controller
TOTAL : 45 PERIODS
OUTCOMES:
 conduct the experiments and obtain the servo and regulatory responses of process
control loops such as level, pressure, flow and temperature.
 arrive the optimum controller settings using various tuning methods by experimental and
mathematically described processes.
 analyze and design control schemes for multiloop processes such as three tank and four
tank systems.
MG8651 ENGINEERING MANAGEMENT LTPC

3 0 0 3
OBJECTIVES:
 To make the students aware of the outline of managerial functions relating to
manufacturing.
UNIT I MARKETING AND PERSONNEL MANAGEMENT 7
Functions of Marketing – Sales Promotion Methods – Advertising – Product Packaging –

Marketing Variables – Distribution Channels – Organization – Market research – Market
Research Techniques. Functions of Personnel Management – Recruitment – Training –
Leadership - Motivation – Communication – Conflict - Industrial Relations – Trade union –
Management functions
73
UNIT II INVENTORY MANAGEMENT 10
Purpose of Inventory – Cost Related to inventory – Basic EOQ Model – Variations in EOQ
Model – Finite Production – Quantity Discounts – ABC Analysis – MRP – Lot size under
constraints.
UNIT III OPERATIONS MANAGEMENT 9
Plant Location – Layout – Materials Handling – Method Study – Time Study – Ergonomics –
Aggregate Planning – Value Analysis.
UNIT IV FINANCIAL MANAGEMENT 8
Capital – Types – Sources – Break Even Analysis – Financial Statements – Income Statement
– Balance Sheet – Capital Budgeting – Working Capital Management – Inventory Pricing.
UNIT V OPERATIONS RESEARCH TECHNIQUES 11
Replacement theory – Linear Programming - Transportation and assignment problems –

Sequencing - Network Techniques - CPM and PERT.
TOTAL : 45 PERIODS
OUTCOMES:
 The students would be able to understand the basic application of operational tools and
manufacturing.
TEXT BOOKS:
1. R.Kesavan, C.Elanchezhian and T.Sundar Selwyn – Engineering Management –
Eswar Press, 2005
2. R.Panneerselvam – Operations Research – Prentice Hall of India, 2003.
REFERENCES:
1. Koontz and Odonnel-Essentials of Management, McGraw Hill 1992.
2. Philips Kotler – Principles of marketing, Prentice Hall of India, 1995
3. I.M.Pandey – Financial Management, Vikas Publishing House, 1995
4. K.K.Ahuja – Personnel Management, Kalyane Publication 1992
74
5. K.Panneerselvam – Production and Operations Management – Prentice Hall of India,
2003.
6. Martand T. Telesand – Industrial and Business Management – S.Chand & Co., 2001
7. R.Kesavan,C.Elanchezian and B.Vijayaramnath – Production Planning and Control
Anuratha Publishing Co. Ltd., Chennai – 2008.
EI8601 ANALYTICAL INSTRUMENTS L T P C

3 0 0 3
OBJECTIVES :
 gain knowledge on various Spectro Photometers.
 learn about the ion conductivity and dissolved component analyzer.
 Understand the principle and operation of important instrumental methods for chemical
analysis of gas samples.
 understand the principle, types of applications of chromatography.
 Study about the construction and working principle of X-ray, Nuclear Magnetic
Resonance and Mass spectroscopy
UNIT I COLORIMETRY AND SPECTROPHOTOMETRY 9
Spectral methods of analysis– Beer-Lambert law – Colorimeters – UV-Visible

spectrophotometers – Single and double beam instruments – Sources and detectors – IR
Spectrophotometers – Types – Attenuated total reflectance flame photometers – Atomic
absorption spectrophotometers – Sources and detectors – FTIR spectrophotometers – Flame
emission photometers – Fluorescence spectrophotometer
UNIT II CHROMATOGRAPHY 9
Different techniques – Techniques by chromatographic bed shape- Column chromatography-
Planar Chromatography-Paper Chromatography-Thin layer Chromatography-Applications -
Techniques by physical state of mobile phase- Gas chromatography – Sources- Detectors
– Liquid chromatographs –sources- detectors- Applications – High-pressure liquid
chromatographs – sources-detectors- Applications- Techniques by separation mechanism-
Ion exchange chromatography-size-exclusion chromatography-Applications
UNIT III INDUSTRIAL GAS ANALYZERS AND POLLUTION MONITORING
INSTRUMENTS 9
Types of gas analyzers – Oxygen, NO2 and H2S types, IR analyzers, thermal conductivity
75
analyzers, analysis based on ionization of gases. Air pollution due to carbon monoxide,
hydrocarbons, nitrogen oxides, sulphur dioxide estimation - Dust and smoke measurements.
UNIT IV PH METERS AND DISSOLVED COMPONENT ANALYZERS 9
Principle of pH measurement, glass electrodes, hydrogen electrodes, reference electrodes,

selective ion electrodes, ammonia electrodes, cyclic voltametry, biosensors, dissolved oxygen
analyzer – Sodium analyzer – Silica analyzer.
UNIT V NUCLEAR MAGNETIC RESONANCE AND MICROSCOPIC TECHNIQUES 9
NMR – Basic principles – NMR spectrometer – Applications - Electron spin Resonance

spectroscopy – Basic principles, Instrumentation and applications. Scanning Electron
Microscope (SEM) - Basic principles, Instrumentation and applications. Transmission Electron
Microscope (TEM) – Basic principles – Instrumentation and applications. Mass spectrometers
– Different types – Applications.
TOTAL : 45 PERIODS
OUTCOMES:
 acquire knowledge on number of analytical tools which are useful for industrial analysis,
drugs and pharmaceutical labs.
 Get exposed to different chromatographic techniques, NMR and dissolved component
analyzers.
TEXT BOOKS
1. R.S. Khandpur, Handbook of Analytical Instruments, Tata McGraw Hill publishing Co.
Ltd., 2nd edition, 2006.
2. G.W. Ewing, Instrumental Methods of Analysis, McGraw Hill, 2004.
REFERENCES
1. Braun, R.D., Introduction to Instrumental Analysis, McGraw – Hill, Singapore, 2006.
2. H.H.Willard, L.L.Merritt, J.A.Dean, F.A.Settle, Instrumental methods of analysis, CBS
publishing & distribution, 1995.
3. Liptak, B.G., Process Measurement and Analysis, CRC Press, 2005.
76
EI8602 COMPUTER CONTROL OF PROCESSES LT P C
3003
OBJECTIVES:
 study about the state space analysis for discrete data systems
 gain knowledge on parametric and non parametric methods of system
identification.
 learn the procedure for designing various digital controllers
 Know about the steps for carrying out analysis and design of multiloop controllers for
MIMO processes.
 Learn about the different multivariable controllers and their implementation issues.
UNIT I DISCRETE STATE-VARIABLE TECHNIQUE 9
State equation of discrete data system with sample and hold – State transition equation –
Methods of computing the state transition matrix – Decomposition of discrete data transfer
functions – State diagrams of discrete data systems – System with zero-order hold –
Controllability and observability of linear time invariant discrete data system – Stability tests of
discrete-data system – State Observer - State Feedback Control.
UNIT II SYSTEM IDENTIFICATION 9
Non Parametric methods:- Transient analysis – Frequency analysis – correlation analysis

– Spectral analysis – Parametric methods:- Least square method – Recursive least square
method.
UNIT III DIGITAL CONTROLLER DESIGN 9
Review of z-transform – Modified of z-transform – Pulse transfer function – Digital PID

controller – Dead-beat control and Dahlin’s control – Smith predictor – Digital Feed-forward
controller – IMC- State Feedback Controller - LQG Control
UNIT IV MULTI-LOOP REGULATORY CONTROL 9

Multi-loop Control - Introduction – Process Interaction – Pairing of Inputs and Outputs -The
Relative Gain Array (RGA) – Properties and Application of RGA - Multi-loop PID Controller –
Biggest Log Modulus Tuning Method - Decoupler
77
UNIT V MULTIVARIABLE REGULATORY CONTROL 9
Introduction to Multivariable control –Multivariable PID Controller -Multivariable IMC–

Multivariable Dynamic Matrix Controller -Multivariable Model Predictive Control –Generalized
Predictive Controller – Implementation Issues
TOTAL : 45 PERIODS
OUTCOMES:
 carry out state space analysis for discrete data systems and able to design various
digital controllers.
 Apply their knowledge on parametric and non parametric methods of system
identification.
 Apply their knowledge on carrying out analysis and design of multiloop and multivariable
controllers for MIMO processes.
TEXT BOOKS:
1. Soderstorm, T. and Stoica, P., “System Identification”, Prentice Hall International Ltd.,
UK., 1989.
2. Gopal, M., “Digital Control and State Variable Methods”, Tata McGrawHill, 2003.
3. Bequette, B.W., “Process Control Modeling, Design and Simulation”, Prentice Hall of
India, 2004.
REFERENCE BOOKS
1. Stephanopoulos, G., “Chemical Process Control - An Introduction to Theory and
Practice”, Prentice Hall of India, 2005.
2. Seborg, D.E., Edgar, T.F. and Mellichamp, D.A., “Process Dynamics and Control”,
Wiley John and Sons, 2nd Edition, 2003.
3. E. Ikonen and K. Najim, “ Advanced Process Identification and Control”, Marcel Dekker,
Inc. Newyork, 2002
4. P. Albertos and S. Antonio, “ Multivariable Control Systems An Engineering Approach”,
Springer Verlag, 2004
5. Sigurd Skogestad, Ian Postlethwaite, “Multivariable Feedback Control: Analysis and
Design”, John Wiley and Sons, 2004.
78
EI8603 MICRO CONTROLLER BASED SYSTEM DESIGN L T P C
3 0 0 3
OBJECTIVES :
 study about the PIC Microcontroller, its architecture and programming.
 gain knowledge about the interrupts and timer of PIC microcontroller.
 study and understand the peripherals and interfacing devices with microcontrollers.
 Get introduced to the concept of ARM processor, its architecture and programming.
 Learn the ARM processor organization, execution, implementation and applications.
UNIT I INTRODUCTION TO PIC MICROCONTROLLER 9
Introduction to PIC Microcontroller – PIC 16C6x and PIC 16C7x Architecture – PIC 16cxx–
- Pipelining - Program Memory considerations – Register File Structure - Instruction Set -
Addressing modes – Simple Operations.
UNIT II INTERRUPTS AND TIMER 9
PIC microcontroller Interrupts - External Interrupts - Interrupt Programming – Loop time subroutine
- Timers- Timer Programming – Front panel I/O- Soft Keys – State machines and key switches –
Display of Constant and Variable strings.
UNIT III PERIPHERALS AND INTERFACING 9
I2C Bus for Peripherals Chip Access – Bus operation- Bus subroutines – Serial EEPROM - –
Analog to Digital Converter – UART- Baud rate selection – Data handling circuit – Initialization
- LCD and keyboard Interfacing - ADC, DAC, and Sensor Interfacing.
UNIT IV INTRODUCTION TO ARM PROCESSOR 9
ARM Architecture – ARM programmer’s model - ARM Development tools- Memory Hierarchy
– ARM Assembly Language Programming – Simple Examples – Architectural Support for
Operating systems.
UNIT V ARM ORGANIZATION 9
3-Stage Pipeline ARM Organization – 5-Stage Pipeline ARM Organization – ARM Instruction
Execution - ARM Implementation – ARM Instruction Set – ARM coprocessor interface –
79
Architectural support for High Level Languages – Embedded ARM Applications.
TOTAL: 45 PERIODS
OUTCOMES:
 Get familiarized with PIC Microcontroller, its architecture and programming.
 gain knowledge about the interrupts ,timer and strings of PIC microcontroller.
 Gain knowledge about ARM processor, its architecture, programming and applications.
TEXT BOOKS:
1. Peatman, J.B., “Design with PIC Micro Controllers”” Pearson Education, 3rd Edition,
2004
2. Furber,S., “ARM System on Chip Architecture” Addison Wesley trade Computer
Publication, 2000.
REFERENCE:
1. Mazidi, M.A., “PIC Microcontroller” Rollin Mckinlay, Danny causey Pretice Hall of India,
2007.
HS8561 EMPLOYABILITY SKILLS LT P C

(LAB / PRACTICAL COURSE) 0 0 2 1
(Common to all branches of Fifth or Sixth Semester B.E / B.Tech programmes)
OBJECTIVES
• To enhance the employability skills of students with a special focus on
Presentation skills, Group discussion skills and Interview skills
• To help them improve their soft skills, including report writing, necessary for
the workplace situations
1. Making presentations – introducing oneself – introducing a topic –
answering questions – individual presentation practice
2. Creating effective PPTs – presenting the visuals effectively
3. Using appropriate body language in professional contexts – gestures,
facial expressions, etc.
80
4. Preparing job applications - writing covering letter and résumé
5. Applying for jobs online - email etiquette
6. Participating in group discussions – understanding group dynamics -
brainstorming the topic
7. Training in soft skills - persuasive skills – People skills - questioning and
clarifying skills – mock GD
8. Writing Project proposals – collecting, analyzing and interpreting data / drafting
the final report
9. Attending job interviews – answering questions confidently
10. Interview etiquette – dress code – body language – mock interview
TOTAL: 30 PERIODS
REQUIREMENTS FOR A CLASS OF 30 STUDENTS

1. A PC or a lap top with one or two speakers
2. A Collar mike and a speaker
3. An LCD projector and a screen
4. CD’s and DVD’s on relevant topics
OUTCOMES:
At the end of the course, learners should be able to
 Take international examination such as IELTS and TOEFL
 Make presentations and Participate in Group Discussions.
 Successfully answer questions in interviews.
REFERENCE BOOKS
1. Dhanavel, S.P. 2010. English and Soft Skills. Hyderabad: Orient BlackSwan Ltd.
2. Corneilssen, Joep. How to Prepare for Group Discussion and Interview. New Delhi:
Tata-McGraw-Hill, 2009.
3. D’Abreo, Desmond A. Group Discussion and Team Building. Mumbai: Better Yourself
Books, 2004.
4. Ramesh, Gopalswamy, and Mahadevan Ramesh. The ACE of Soft Skills. New Delhi:
Pearson, 2010.
5. Gulati, Sarvesh. Corporate Soft Skills. New Delhi: Rupa and Co. 2006.
6. Van Emden, Joan, and Lucinda Becker. Presentation Skills for Students. New York:
Palgrave Macmillan, 2004.
81
EXTENSIVE READERS
1. Covey, Stephen R. The 7 Habits of Highly Effective People. New York: Free Press,
1989.
2. Bagchi, Subroto. The Professional. New Delhi: Penguin Books India, 2009.
WEB RESOURCES
1. www.humanresources.about.com
2. www.careerride.com
EI8611 COMPUTER CONTROL OF PROCESSES LABORATORY LTP C

0 0 32
OBJECTIVES :
 learn the procedure to obtain the dynamic model of given process using parametric and
non parametric identification methods.
 design appropriate controllers for processes such as conical tank system, heat
exchanger, AC DC servo system and four tank system.
 perform Sequential logic programming for discrete control applications and implement
the same using PLCs.
 develop and implement control strategies in Industrial DCS and implement the schemes
on level process Test Setup.
 study the procedure to build soft sensors using Kalman Filter
LIST OF EXPERIMENTS
1. Simulation of Lumped and Distributed Parameter Systems.
2. Identification of Linear Dynamic model (Black Box) of a Process using Parametric
Methods.
3. Design of Digital Controllers for First-order plus dead-time process using Direct Synthesis
Methods
4. PC based Control of Heat Exchanger.
5. Study of Distributed Control System (Delta V and CS 3000).
6. Implementation of Discrete Control Sequence using PLC.
7. Control of Level Process using Embedded Controller.
8. On-line Control using Distributed Control System.
82
9. Design of Gain Scheduled PI Controller Conical - tank System.
10. Study of AC and DC Servo Control System
11. Design and Implementation of Dynamic Matrix Control Scheme on the simulated model
of a Four-tank System.
12. On-line Estimation of State Variables using Kalman Filter
TOTAL: 45 PERIODS
OUTCOMES:
 develop dynamic model and control of given process using parametric and non
parametric identification methods.
 Get familiarised with Sequential logic programming for discrete control applications and
implement the same using PLCs.
 Gain knowledge to develop and implement control strategies in Industrial DCS and
implement the schemes on level process Test Setup.
EI8701 LOGIC AND DISTRIBUTED CONTROL SYSTEM LT PC

3 0 0 3
OBJECTIVES :
 study the fundamentals of Data Networks.
 gain knowledge about hardware architecture and software for PLCs and SCADAs.
 design PLC program using ladder logic programming, functional block programming and
sequential functional chart for selected Industrial processes.
 study the Distributed Control System, its architecture and interfacing.
 Learn about selective Industrial data communication protocols such as HART and field
bus communication suitable for an industrial application.
UNIT I DATA NETWORK FUNDAMENTALS 9
Network hierarchy and switching – ISO/OSI Reference model – Data link control protocol:-
HDLC - media access protocol :- Command / response, Token passing and CSMA/CD – TCP/
IP – Bridges – Routers – Gateways – Standard ETHERNET and ARCNET Configuration.
UNIT II PLC AND SCADA 9
Evolutions of PLCs – Sequential and Programmable Controllers – Architecture – Comparative

83
study of Industrial PLCS. – SCADA:- Hardware and software, Remote terminal units, Master
station, Communication architectures and open SCADA protocols.
UNIT III PLC PROGRAMMING 9
Plc Programming:- Ladder logic , Functional block programming, sequential function chart,
Instruction list.
UNIT IV DISTRIBUTED CONTROL SYSTEM 9
DCS – Various Architectures – Comparison – Local control unit – Process interfacing issues –
Displace study of any one DCS available in market - case studies in DCS
UNIT V HART AND FIELD BUS 9
Introduction – Evolution of Signal standard – HART Communication Protocol – Communication

Modes – HART Commands – HART Applications Field Bus-Introduction, General field bus
Architecture, Basic requirements of Field bus standard, Field Bus topology, Interoperability
and Interchangeability – Introduction to OLE for process control(OPC)
TOTAL : 45 PERIODS
OUTCOMES:
 Get familiarised to fundamentals of Data Networks and select Industrial data
communication protocols such as HART and field bus communication suitable for an
industrial application.
 Acquire knowledge about hardware architecture, software and programming of PLCs.
 Get exposed to Distributed Control System, its architecture and interfacing.
TEXT BOOKS
1. F.D. Petruzella, Programmable Logic Controllers, Tata Mc-Graw Hill, Third edition, 2010
2. Michael P. Lukas, Distributed Control Systems: Their Evaluation and Design, Van
Nostrand Reinhold Co., 1986.
3. Clarke, G., Reynders, D. and Wright, E., “Practical Modern SCADA Protocols: DNP3,
4. 60870.5 and Related Systems”, Newnes, 1st Edition, 2004
84
REFERENCES
1. T.A. Hughes, Programmable Controllers, Fourth edition, ISA press, 2005
2. Krishna Kant, Computer Based Industrial Control, Second edition, Prentice Hall of India,
New Delhi, 2010
3. John W. Webb and Ronald A. Reis, ‘Programmable Logic Controllers, Fifth edition,
Prentice Hall of India, New Delhi, 2010
4. John R. Hackworth and Frederick D. Hackworth Jr, Programmable Logic Controllers,
Pearson, New Delhi, 2004.
5. Bowten, R “HART Application Guide”, HART Communication foundation, 1999 .
6. Berge, J.,“Field Busses for process control: Engineering, operation,maintance“, ISA
press, 2004
EI8702 VLSI DESIGN LT P C

3003
OBJECTIVES :
 gain knowledge about the characteristics of CMOS, NMOS and their fabrication.
 learn and design rules and layout for NMOS and CMOS.
 understand FPGA, CPLD and their architectures.
 Study about the principle of HDL, its synthesis, validation and verification.
 Gain practical knowledge on VHDL programming of combinational and sequential logic
circuits
UNIT I BASIC DEVICE CHARACTERISTICS 9
NMOS, PMOS, enhancement and depletion mode transistor, MOSFET threshold voltage, linear
and saturated operation, standard NMOS and CMOS inverters- switching speed, transistor
sizing and power dissipation, noise margin. Pass transistors and Transmission gates. CMOS
device fabrication principles, CMOS latch-up. SPICE models and circuit simulation using
PSPICE
UNIT II DESIGN RULES AND LAYOUT 9
Purpose of design rules, NMOS and CMOS design rules and layout, Design of NMOS and
CMOS inverters, NAND and NOR gates. Interlayer contacts, butting and buried contacts, stick
diagrams, layout of parity generator, multiplexer and adder element. Design and layout of 1
85
bit shift register cell.
UNIT III FPGAs AND CPLDs 9

Introduction to FPGA Architectures. SRAM-Based FPGAs. Permanently Programmed FPGAs.
I10 cell, Introduction to CPLDs. FPGAs and CPLDs from Xilinx, Altera and Actel. Introduction
to ASIC.
UNIT IV PRINCIPLES OF HDL 9
VHDL design flow Entity- Signal and Variable – Using Subcircuits - Concurrent Assignment
Statements – Sequential Assignment Statements. High level VLSI synthesis and design tools
with CAD algorithm - Overview for floor planning, placement and routing.
UNIT V VHDL PROGRAMMING 9
VHDL programs of encoder, decoder, multiplexer, adders, shift registers, counters and
accumulator. Realizing PID controller in VHDL. Use of VHDL in process control applications.
TOTAL : 45 PERIODS
OUTCOMES:
 Gain knowledge about the characteristics and design rules for CMOS, NMOS
 Get exposed to FPGA, CPLD, their architectures and capable of carrying out VHDL
programming of combinational and sequential logic circuits
 understand the principle of HDL, its synthesis, validation and verification.
REFERENCES
1. Jan M.Rabaey, Anantha Chandrakasan and Borivoje Nikolic, Digital Integrated circuits
– A design perspective, Second Edition, Prentice hall of India ,2003.
2. Stephen Brown, Zvonko Vranesic, Fundamentals of Digital Logic with VHDL design,
International edition 2000.
3. Douglas A. Puchnell and Kamran Eshraghian, Basic VLSI design,Third edition, Prentice
Hall of India, 2004.
4. Michael John Sebastian Smith, Application-Specific Integrated Circuits, Addison-Wesley,
June 1997.
5. Uyemura, John P, Introduction to VLSI Circuits and Systems,1st Edition, John Wiley
and sons,2001.
6. Wayne Wolf, FPGA – Based System Design, Prentice Hall , 2004.
86
EI8703 BIOMEDICAL INSTRUMENTATION LT P C
3 0 0 3
OBJECTIVES :
 understand the various physiological signal measurements and various assisting devices.
 Gain knowledge about the recording of ECG, EEG,EMG and ERG signals and their
analysis.
 learn about the techniques used for measurement of Blood, heart, lung and liver related
parameters.
 Study different medical imaging systems and its applications.
 understand the concept of assisting and therapeutic devices.
UNIT I BASIC CONCEPTS OF MEDICAL INSTRUMENTATION 6
Terminology of medicine and medical devices - Generalized medical Instrumentation systems

- Medical measurement constraints - Classification of Biomedical instruments - Interfering and
modifying inputs - Compensation Techniques-Bio-statics - Generelized static characteristics
- Generalized Dynamic Characteristics - Design criteria - Transducers Selection criteria.
The origin of Biopotentials - Electrical activity of excitable cells - Volume conductor fields -
Functional organization of peripheral Nervous system
UNIT II ELECTRICAL PARAMETERS ACQUISITION AND ANALYSIS 12
Biopotential Electrodes - The electrode-Electrolyte interface - Polarization – Polarizable

and non polarizable electrodes - Electrode behavior and circuit models-Electrode arrays -
Microelectrodes. Electrical parameters acquisition - ECG, EEG, EMG, ERG – Lead systems
and recording methods – Typical waveforms - Electrical safety in medical environment,
shock hazards – leakage current-Instruments for checking safety parameters of biomedical
equipments.
UNIT III NON ELECTRICAL PARAMETERS MEASUREMENT AND DIAGNOSTIC

PROCEDURES 9
Measurement of blood pressure - Cardiac output – blood flow - Heart rate - Heart sound
- Pulmonary function measurements – spirometer – Photo Plethysmography, Body
Plethysmography – Blood Gas analysers, pH of blood – measurement of blood pCO2, pO2,
finger - tip oxymeter - ESR, GSR measurements .
87
UNIT IV MEDICAL IMAGING SYSTEMS 9
X-ray machine- computer radiography - computer tomography - magnetic resonic imaging

– Neuclear medicine – single photo emission computer tomography – positron emission
tomography – Ultra sonography – Endoscopy – Thermography .
UNIT V LIFE ASSISTING, THERAPEUTIC AND ROBOTIC DEVICES 9
Pacemakers – Defibrillators – Ventilators – Nerve and muscle stimulators – Diathermy –

Heart – Lung machine – Audio meters – Dialysers – Lithotripsy - Therapeutic and Prosthetic
Devices – Infant Incubators – Drug Delivery Devices – Surgical Instruments.
TOTAL: 45 PERIODS
OUTCOMES:
 gain knowledge about the recording of ECG, EEG,EMG and ERG signals and their
analysis.
 Get familiarized about the techniques used for measurement of Blood, heart, lung and
liver related parameters.
 Gain knowledge on different medical imaging systems and its applications.
TEXT BOOKS:
1. John G. Webster, Medical Instrumentation Application and Design, John Wiley and
sons, New York, 1998.
2. Leslie Cromwell, Biomedical Instrumentation and Measurement, Prentice hall of India,
New Delhi, 2007.
REFERENCES
1. Ed. Joseph D. Bronzino, The Biomedical Engineering HandBook, Second Edition, Boca
Raton, CRC Press LLC, 2000
2. Joseph J.carr and John M. Brown, Introduction to Biomedical Equipment Technology,
John Wiley and sons, New York, 1997.
3. Duane Knudson, Fundamentals of Biomechanics, Springer, 2003.
4. Suh, Sang, Gurupur, Varadraj P., Tanik, Murat M., Health Care Systems, Technology
and Techniques, Springer, 1st Edition, 2011.
5. Khandpur R.S, Handbook of Biomedical Instrumentation, Tata McGraw-Hill, New Delhi,
1997.
88
EI8711 CREATIVE AND INNOVATIVE PROJECT LT P C
(Activity based – Subject related) 0 0 3 2
OBJECTIVES:
 To use the knowledge acquired in Electrical and Electronics Engineering to do a mini
project, which allows the students to come up with designs, fabrication or algorithms and
programs expressing their ideas in a novel way.
STRATEGY:
To identify a topic of interest in consultation with Faculty/Supervisor. Review the literature
and gather information pertaining to the chosen topic. State the objectives and develop a
methodology to achieve the objectives. Carryout the design / fabrication or develop computer
code. Demonstrate the novelty of the project through the results and outputs.
OUTCOMES:
 Obtain the skills of conducting literature survey.
 Learn different field problems pertaining to Electrical Engineering and the existing
solutions to them.
 Providing new or innovative solutions with the advent of emerging technologies
 Acquire hardware fabrication skills.
EI8712 SYSTEM DESIGN LABORATORY L T P C

0 0 3 2
OBJECTIVES :
 design Instrumentation amplifier, active filters, RPS and signal converters.
 design and implement the signal conditioning circuits for transducers such as RTD, strain
gauge and thermocouple.
 gain knowledge on the design and implementation of orifice plate, Rotameter, control
valves and Differential pressure transmitter.
 design and implement PID controller using operational amplifiers, microprocessors and
multichannel data acquisition system.
 learn the procedure to prepare P&I diagram and documentation of the project work on
selected industrial processes
89
LIST OF EXPERIMENTS
1. Design of Instrumentation amplifier.
2. Design of active filters – LPF, HPF and BPF
3. Design of regulated power supply and design of V/I and I/V converters.
4. Design of linearizing circuits and cold–junction compensation circuit for thermocouples.
5. Design of signal conditioning circuit for strain gauge and RTD.
6. Design of orifice plate and rotameter.
7. Design of Control valve (sizing and flow-lift characteristics)
8. Design of PID controller (using operational amplifier and microprocessor)
9. Design of a multi-channel data acquisition system
10. Design of multirange DP transmitter
11. Piping and Instrumentation Diagram – case study.
12. Preparation of documentation of instrumentation project and project scheduling for
the above case study. (process flow sheet, instrument index sheet and instrument
specifications sheet, job scheduling, installation procedures and safety regulations).
13. One or two experiments beyond syllabus
TOTAL: 45 PERIODS
OUTCOMES:
 Get exposed to the design and implementation of flow meters and to design signal
conditioning circuits for transducers such as RTD, strain gauge and thermocouple.
 design and implement PID controller using operational amplifiers, microprocessors and
multichannel data acquisition system.
90
EI8811 PROJECT WORK L T P C
0 0 12 6
OBJECTIVES :
 learn methodology to select a good project and able to work in a team leading to
development of hardware/software product.
 prepare a good technical report.
 Gain Motivation to present the ideas behind the project with clarity.
A Project topic must be selected either from published lists or the students themselves may
propose suitable topics in consultation with their guides. The aim of the project work is to
deepen comprehension of principles by applying them to a new problem which may be the
design and manufacture of a device, a research investigation, a computer or management
project or a design problem.
The progress of the project is evaluated based on a minimum of three reviews. The review
committee may be constituted by the Head of the Department.
A project report is required at the end of the semester. The project work is evaluated jointly
by external and internal examiners constituted by the Head of the Department based on oral
presentation and the project report.
OUTCOMES:
 select a good project and able to work in a team leading to development of
hardware/software product.
 prepare a good technical report and able to present the ideas with clarity.
EI8001 ADVANCED CONTROL ENGINEERING LTPC

3003
OBJECTIVES :
 gain knowledge on the methods of plotting Nyquist chart for multivariable
system.
 develop state space models.
 design state feedback control schemes and state observers.
 learn the different types of non-linearities and phase plane analysis.
91
 understand the different methods of determining the stability of non-linear systems.
UNIT I FREQUENCY DOMAIN DESCRIPTIONS 9
Properties of transfer functions - poles and zeros of transfer function matrices – singular value
analysis – Multivariable Nyquist plots.
UNIT II STATE SPACE APPROACH 9
Review of state model for systems – State transition matrix and its properties – free and forced
responses – controllability and observability – Kalman decomposition – minimal realization –
balanced realization.
UNIT III STATE FEEDBACK CONTROL AND STATE ESTIMATOR 9
State Feedback – Output Feedback – Pole placement technique – Full order and Reduced
Order Observers – Deadbeat Observers – Dead beat Control
UNIT IV NON-LINEAR SYSTEMS 9
Types of Non-Linearity – Typical Examples – Phase plane analysis (analytical and graphical
methods) – Limit cycles – Equivalent Linearization – Describing Function Analysis, Derivation
of Describing Functions for different non-linear elements.
UNIT V STABILITY OF NON-LINEAR SYSTEMS 9
Stability concepts – Equilibrium points – BIBO and Asymptotic stability – Stability Analysis by
DF method – Lyapnov Stability Criteria – Krasovskil’s method – Variable Gradient Method –
Popov’s Stability Criterion.
TOTAL : 45 PERIODS
OUTCOMES:
 analyze MIMO systems methods of plotting Nyquist chart for multivariable
system.
 analyze the state space models and capable to design state feedback control
schemes and state observers.
92
TEXT BOOK:
1. K.Ogata, “Modern Control Engineering”, PHI, 5th Edition, 2010.
REFERENCE BOOKS:
1. C.T. Chen, “Linear System Theory and Design”, Prentice Hall, 3rd Edition, 2003
2. M.Gopal, “Modern Control System Theory”, Wiley Eastern Limited, 2nd edition, 1996.
3. W. L. Luyben, “Process Modeling, Simulation and Control for Chemical Engineers”,
2nd edition, McGraw Hill, 1990.
4. D.P.Atherton, “Stability of non linear systems”, Prentice Hall, 1986.
EI8002 APPLIED DIGITAL SIGNAL PROCESSING L T P C

3 0 0 3
OBJECTIVES :
 learn about different random signals and random processes.
 gain knowledge on different methods of spectrum estimation.
 understand the concepts of linear estimation and prediction.
 Know the procedure for design of different types of adaptive filters.
 Mathematically represent transfer function of signals using wavelet transforms and their
applications.
UNIT I DISCRETE TIME RANDOM SIGNALS 9
Discrete random process – Ensemble averages, Stationary and ergodic processes -

Autocorrelation and Autocovariance properties and matrices - White noise - Power Spectral
Density - Spectral Factorization - Innovations - Representation and Process - Filtering random
processes - ARMA, AR and MA processes.
UNIT II SPECTRUM ESTIMATION 9
Bias and Consistency – Periodogram - Modified periodogram - Blackman-Tukey

method, Welch method, - Parametric methods of spectral estimation - Levinson-Durbin
recursion.
93
UNIT III LINEAR ESTIMATION AND PREDICTION 9
Forward and Backward linear prediction - Filtering - FIR Wiener filter- Filtering and linear
prediction - non-causal and causal IIR Wiener filters - Discrete Kalman filter.
UNIT IV ADAPTIVE FILTERS 9
Principles of adaptive filter – FIR adaptive filter – Newton’s Steepest descent algorithm –
Derivation of first order adaptive filter – LMS adaptation algorithms – Adaptive noise
cancellation, Adaptive equalizer, Adaptive echo cancellers.
UNIT V WAVELET TRANSFORM 9
Short Time Fourier Transform - Continuous and discrete wavelet transform – Multi-resolution
analysis, Application of wavelet transform - Cepstrum and Homomorphic filtering.
TOTAL : 45 PERIODS
OUTCOMES
 understand the concept of multirate signal processing and random signal processing
TEXT BOOKS:
1. Monson H, Hayes, Statistical Digital Signal Processing and Modeling, John Wiley and
Sons Inc., New York, Indian Reprint, 2007.
2. Rafael C. Gonzalez, Richard E. Woods, Digital Image Processing, Pearson, Second
Edition, 2004.
REFERENCES:
1. John G.Proakis, Dimitris G. Manolakis, Digital Signal Processing, Pearson, Fourth 2007.
2. Sophocles J. Orfanidis, Optimum Signal Processing, An Introduction, McGraw Hill, 1990.
94
EI8003 APPLIED SOFT COMPUTING LTPC
3 00 3
OBJECTIVES :
 study the fundamentals of Neural networks and their architecture.
 gain knowledge on the applications of Neural networks for modelling and control.
 Get introduced to the concept of fuzzy set theory
 Understand Fuzzy logic theory for modelling and control.
 Develop hybrid control Schemes and apply optimization algorithms.
UNIT I ARTIFICIAL NEURAL NETWORK 9
Review of fundamentals – Biological neuron, artificial neuron, activation function, single

layer perceptron – Limitation – Multi layer perceptron – Back propagation algorithm (BPA) –
Recurrent neural network (RNN) – Adaptive resonance theory (ART) based network – Radial
basis function network – online learning algorithms, BP through time – RTRL algorithms –
Reinforcement learning.
UNIT II NEURAL NETWORKS FOR MODELING AND CONTROL 9
Modeling of non-linear systems using ANN – Generation of training data – Optimal architecture
– Model validation – Control of non-linear systems using ANN – Direct and indirect neuro
control schemes – Adaptive neuro controller – Familiarization with neural network toolbox
UNIT III FUZZY SET THEORY 9
Fuzzy set theory – Fuzzy sets – Operation on fuzzy sets – Scalar cardinality, fuzzy cardinality,
union and intersection, complement (Yager and Sugeno), equilibrium points, aggregation,
projection, composition, cylindrical extension, fuzzy relation – Fuzzy membership functions
UNIT IV FUZZY LOGIC FOR MODELING AND CONTROL 9
Modeling of non-linear systems using fuzzy models – TSK model – Fuzzy logic controller –
Fuzzification – Knowledge base – Decision making logic – Defuzzification – Adaptive fuzzy
systems – Familiarization with fuzzy logic toolbox
UNIT V HYBRID CONTROL SCHEMES 9
Fuzzification and rule base using ANN – Neuro fuzzy systems – ANFIS – Fuzzy neuron
95
– Introduction to GA – Optimization of membership function and rule base using Genetic
Algorithm – Introduction to support vector machine – Particle swarm optimization – Case
study – Familiarization with ANFIS toolbox
TOTAL : 45 PERIODS
OUTCOMES:
 understand the different ANN architecture and concept of Fuzzy Logic theory and their
applications in modeling and control
 Get familiarity with hybrid control Schemes and selected optimization algorithms.
TEXTBOOKS
1. Laurence Fausett, “Fundamentals of Neural Networks”, Prentice Hall, Englewood Cliffs,
N.J., 1992
2. Timothy J. Ross, “Fuzzy Logic with Engineering Applications”, McGraw Hill Inc.,
1997.
REFERENCE BOOKS
1. Goldberg, “Genetic Algorithm in Search, Optimization and Machine learning”, Addison
Wesley Publishing Company Inc. 1989.
2. Millon W.T., Sutton R.S. and Webrose P.J., “Neural Networks for Control”, MIT press,
1992
3. Ethem Alpaydin, “Introduction to Machine learning (Adaptive Computation and Machine
Learning series)’, MIT Press, 2004
4. Zhang Huaguang and Liu Derong, “Fuzzy Modeling and Fuzzy Control Series: Control
Engineering”, 2006
EI8004 DATA BASE MANAGEMENT L T P C

3 0 0 3
OBJECTIVES :
 understand the concepts of relational database system.
 gain knowledge about the design aspects of Database system
 gain the concept of transactions in Database
 learn the different techniques used for data storage
 know the current trends in object oriented database management system.
96
UNIT I RELATIONAL DATABASES 9
Purpose of database system – Views of data – Data models – Database system architecture
– Relational databases – The relational model – Keys – Relational algebra – Relational
Calculus – SQL fundamentals – Advanced SQL features – Views
UNIT II DATABASE DESIGN 9
Entity-Relationship (ER) model – ER diagrams – Normalization – Functional

dependencies – Non-loss decomposition – First, second, third normal forms and Boyce/
Codd normal form – Integrity and security – Triggers
UNIT III TRANSACTIONS 9
Transaction concepts – ACID properties – Transaction recovery – Log based recovery

– Concurrency – Need for concurrency – Locking protocols – Two phase locking –
Deadlock – Recovery isolation levels – SQL facilities for concurrency
UNIT IV STORAGE TECHNIQUES 9
Overview of physical storage media – Magnetic disks – RAID – Tertiary storage – File
organization – Organization of records in files – Indexing and hashing – Ordered indices –
B+ tree index files – B tree index files – Static hashing – Dynamic hashing
UNIT V ADVANCED TOPICS 9
Query processing – Query optimization – Distributed databases – Architecture –

Distributed transaction processing – Two phase commit protocol - Data warehousing
and mining – Data warehouse architecture – Star and snowflake schema – Data
extraction – Transformation – Cleaning – Loading into a data warehouse – Data mining
fundamentals
TOTAL : 45 PERIODS
OUTCOMES:
 understand relational database system and its design aspects.
 acquire the knowledge about the different techniques used for data storage and capable
of understanding the current trends in object oriented database management system.
97
TEXTBOOKS:
1. Abraham Silberschatz, Henry F. Korth and S. Sudharshan, Database System Concepts,
Sixth edition, Tata McGraw Hill, 2011
2. C. J. Date, A. Kannan and S. Swamynathan, An Introduction to Database Systems,
Eighth edition, Pearson Education, 2006
REFERENCES:
1. Ramez Elmasri and Shamkant B. Navathe, Fundamentals of Database Systems, Fifth
edition, Pearson, 2008
2. Raghu Ramakrishnan, Database Management Systems, Third edition, Tata McGraw
Hill, 2003
3. G. K.Gupta, Database Management Systems, Tata McGraw Hill, 2011
EI8005 FIBRE OPTICS AND LASER INSTRUMENTATION LTPC

3003
OBJECTIVES :
 study about the transmission characteristics of light and principles of TRI in optical fibers.
 Understand about the types of optical fibres and its applications for the measurement of
pressure, temperature, level and strain etc.
 Know about the fundamentals of laser system, its mode of operation and their
classifications.
 learn the applications of laser for measurement of distance, velocity etc and material
processing.
 understand the principles of Holography, its application in NDT and the use of laser in
biomedical application.
UNIT I OPTICAL FIBRES AND THEIR PROPERTIES 9
Principles of light propagation through a fibre-laws related to light propagation through

fibre - Different types of fibers and their properties, Fibre manufacture -- mechanical and
transmission characteristics – Connectors & splicers – Fibre termination – Optical sources –
Optical detectors.
UNIT II INDUSTRIAL APPLICATION OF OPTICAL FIBRES 9

Fibre optic sensors – Fibre optic instrumentation system for measurement of fibre characteristics
– Different types of modulators – Interferometric method for measurement of length – Moire
98
fringes – Measurement of pressure, temperature, current, voltage, liquid level and strain –
fiber optic gyroscope – Polarization Maintaining fibers.
UNIT III LASER FUNDAMENTALS 9

Fundamental characteristics of lasers – Three level and four level lasers – Properties of laser
– Laser modes – Resonator configuration – Q-switching and mode locking – Cavity damping
– Types of lasers – Gas lasers, solid lasers, liquid lasers, semiconductor lasers,Excimer
lasers,VCSEL.
UNIT IV INDUSTRIAL APPLICATION OF LASERS 9
Laser for measurement of distance, length, velocity, acceleration, current, voltage and
Atmospheric effect – Material processing – Laser heating, welding, melting and trimming of
material – Material Removal and vaporization.
UNIT V HOLOGRAM AND MEDICAL APPLICATIONS 9
Holography – Basic principle - Methods – Holographic interferometry and application,

Holography for non-destructive testing – Holographic components – Medical applications of
lasers - laser and tissue interaction – Laser instruments for surgery - removal of tumours of
vocal cards, brain surgery, plastic surgery, gynecology and oncology.
TOTAL : 45 PERIODS
OUTCOMES:
 understand the types of optical fibres and its application as fiber optic sensors
 Get familiarized on the applications of laser for measurement of distance, velocity,
material processing, NDT and biomedical applications .
REFERENCE BOOKS:
1. G. Keiser, ‘Optical Fibre Communication’, McGraw Hill, 1995.
2. Singh,J., “Semi conductor optoelectronics”, McGraw Hill,1995.
3. John F. Ready, ‘Industrial Applications of Lasers’, Academic Press, 1978.
4. Monte Ross, ‘Laser Applications’, McGraw Hill, 1968
5. John and Harry,” Industrial lasers and their application”, McGraw Hill, 2002.
99
EI8006 FUNDAMENTALS OF DATA STRUCTURES AND ALGORITHMS LT PC
30 0 3
OBJECTIVES :
 study the basics of data structures such as arrays, queues etc.
 gain knowledge about the advantages of data structures.
 learn the procedure to select appropriate sorting algorithms for a given application.
 study the basics of graph, its representation and implementation.
 understand storage structures and management.
UNIT I INTRODUCTION AND BASIC DATA STRUCTURES 9
Introduction – Arrays – Structures – Stacks and queues – Linked list – Array, list implementation
and applications
UNIT II ADVANCED DATA STRUCTURES 9
Trees, preliminaries – Binary tree – Tree representation – Tree traversals - Binary search trees
UNIT III SORTING AND HASHING 9
Need for sorting – Selection sort – Insertion sort – Exchange sort – Merge and radix sort –
Heap sort – Heaps – Maintaining the heap property – Building a heap – Heap sort algorithm
–Quick sort – Description – Performance of quick sort – Analysis of quick sort
UNIT IV GRAPHS ALGORITHMS 9
Graphs – Application of graphs – Representation – Dijkstra’s algorithm – Minimum spanning

trees – Single-source shortest paths – All pairs shortest paths
UNIT V STORAGE STRUCTURES AND MANAGEMENT 9

Indexing – B-Tree indexing – Hashing – General idea – Hash functions – Separate chaining
–Open addressing – Rehashing – Extendible hashing – Garbage collection and compaction
TOTAL : 45 PERIODS
OUTCOMES:
 Get familiarized with fundamentals of data structures used in computer science and able to
design new algorithms or modify the existing ones for new applications.
100
TEXTBOOKS:
1. A.S. Tanenbaum, Y. Langram and M. J. Augestiein, Data Structures using C, Second
edition, Pearson Education, 2008
2. E. Horowitz, S. Sahni and Anderson-Freed, Fundamentals of Data Structures in C,
Second edition, University Press, 2007.
EI8007 FUNDAMENTALS OF DIGITAL IMAGE PROCESSING L T P C

3 0 0 3
OBJECTIVES :
 learn and understand the fundamentals of digital image.
 gain knowledge on how images are enhanced to improve subjective perception.
 understand image restoration techniques.
 gain knowledge on image segmentation.
 study the principle of image compression.
UNIT I FUNDAMENTALS OF DIGITAL IMAGE 9
Elements of digital image processing systems - Vidicon and Digital Camera working
principles - Elements of visual perception, brightness, contrast, hue, saturation, mach
band effect - Color image fundamentals - RGB, HSI models, Image sampling, Quantization,
dither, Two-dimensional mathematical preliminaries, 2D transforms - DFT, DCT, KLT, SVD.
UNIT II IMAGE ENHANCEMENT 9
Histogram equalization and specification techniques - Noise distributions - Spatial averaging

- Directional Smoothing, Median, Geometric mean, Harmonic mean, Contraharmonic mean
filters - Homomorphic filtering - Color image enhancement.
UNIT III IMAGE RESTORATION 9

Image Restoration - degradation model, Unconstrained and Constrained restoration, Inverse
filtering - Removal of blur caused by uniform linear motion - Wiener filtering - Geometric
transformations - Spatial transformations.
101
UNIT IV IMAGE SEGMENTATION 9
Edge detection - Edge linking via Hough transform - Thresholding - Region based segmentation
- Region growing - Region splitting and Merging - Segmentation by morphological watersheds
- basic concepts - Dam construction - Watershed segmentation algorithm.
UNIT V IMAGE COMPRESSION 9
Need for data compression - Huffman, Run Length Encoding - Shift codes - Arithmetic coding
- Vector Quantization - Transform coding - JPEG standard - MPEG.
TOTAL : 45 PERIODS
OUTCOMES:
 Gain knowledge about how image are enhanced to improve subjective perception.
 understand the image restoration techniques.
 Gain knowledge on image segmentation and compression.
TEXT BOOKS:
1. Rafael C. Gonzalez, Richard E. Woods, Digital Image Processing, Pearson, Education,
Inc., Second Edition, 2004.
2. Anil K. Jain, Fundamentals of Digital Image Processing, Pearson Education, Inc.,
2002.
REFERENCES:
1. Kenneth R. Castleman, Digital Image Processing, Pearson, 2006.
2. Madhuri A. Joshi, Digital Image Processing - An Algorithmic Approach”, Prentice Hall of
India, 2006.
3. S.Jayaraman , S.Esakkirajan, T.Veerakumar, “ Digital Image Processing”, Tata McGraw
Hill, 2009.
EI8008 FUNDAMENTALS OF NANOSCIENCE AND MEMS L T PC

3 0 0 3
OBJECTIVES :
 learn about nano science technology and its engineering applications.
102
 gain knowledge on different micro fabrication methods
 learn the concept of patterning and lithography for nano scale devices
 know about environmental requirements for nano fabrication facilities

 understand different techniques for nano scale characterisation
Nanoscale Science and Technology- Implications for Physics, Chemistry, Biology and
Engineering-Classifications of nanostructured materials- nano particles- quantum dots,
nanowires-ultra-thinfilms-multilayered materials. Length Scales involved and effect on
properties: Mechanical, Electronic, Optical, Magnetic and Thermal properties. Introduction to
properties and motivation for study (qualitative only).
UNIT II PREPARATION METHODS 10

Bottom-up Synthesis-Top-down Approach: Precipitation, Mechanical Milling, Colloidal routes,
Self-assembly, Vapour phase deposition, MOCVD, Sputtering, Evaporation, Molecular Beam
Epitaxy, Atomic Layer Epitaxy, MOMBE.
UNIT III PATTERNING AND LITHOGRAPHY FOR NANOSCALE DEVICES 5

Introduction to optical/UV electron beam and X-ray Lithography systems and processes, Wet
etching, dry (Plasma /reactive ion) etching, Etch resists-dip pen lithography
UNIT IV PREPARATION ENVIRONMENTS 10

Clean rooms: specifications and design, air and water purity, requirements for particular
processes, Vibration free environments: Services and facilities required. Working practices,
sample cleaning, Chemical purification, chemical and biological contamination, Safety issues,
flammable and toxic hazards, biohazards.
UNIT V CHARECTERISATION TECHNIQUES 10

X-ray diffraction technique, Scanning Electron Microscopy - environmental techniques,
Transmission Electron Microscopy including high-resolution imaging, Surface Analysis
techniques- AFM, SPM, STM, SNOM, ESCA, SIMS-Nanoindentation
TOTAL : 45 PERIODS
OUTCOMES:
 gain knowledge on different micro fabrication methods and get exposed to patterning and
lithography for nano scale devices
 understand different techniques for nano scale characterisation
103
TEXT BOOKS
1. A.S. Edelstein and R.C. Cammearata, eds., “Nanomaterials: Synthesis, Properties and
Applications”, Institute of Physics Publishing, Bristol and Philadelphia, 1996.
2. N John Dinardo, “Nanoscale charecterisation of surfaces & Interfaces”, 2nd edition,
Weinheim Cambridge, Wiley-VCH, 2000
REFERENCES
1. G Timp (Editor), “Nanotechnology”, AIP press/Springer, 1999.
2. Akhlesh Lakhtakia (Editor), “The Hand Book of Nano Technology, Nanometer Structure,
Theory, Modeling and Simulations”. Prentice-Hall of India (P) Ltd, New Delhi, 2007.
EI8009 INSTRUMENTATION IN PETROCHEMICAL INDUSTRIES LT P C

3 0 0 3
OBJECTIVES :
 understand the different oil recovery methods, oil gas separation and its processing.
 learn about the most important unit operations in petrochemical industries like cracking,
reforming etc.
 gain knowledge on the important derivatives obtained from petroleum and its uses.
 Know about the most important variables to be monitored and measured in
petrochemical industry and steps followed for ensuring intrinsic safety.
 study about the different control schemes applied to processes like distillation column,
PVC production unit, cracking and reforming.
UNIT I OIL EXTRACTION AND PROCESSING 9
Techniques used for oil discovery - seismic survey - methods of oil extraction - oil rig system -
Primary and Secondary recovery - Enhanced oil recovery - separation of gas and water from
oil - control loops in oil gas separator - scrubber - coalescer
UNIT II PETROLEUM REFINING 9
Petroleum refining process - unit operations in refinery - thermal cracking - catalytic cracking
- catalytic reforming - polymerization - isomerization - alkylation - Production of ethylene,
acetylene and propylene from petroleum
104
UNIT III CHEMICALS FROM PETROLEUM 9
Chemicals from methane, acetylene, ethylene and propylene - production routes of important
petrochemicals such as polyethylene, polypropylene, ethylene dioxide, methanol, xylene,
benzene, toluene, styrene, VCM and PVC
UNIT IV CONTROL LOOPS IN PETROCHEMICAL INDUSTRY 9
Control of binary and fractional distillation columns - Control of catalytic and thermal crackers -
control of catalytic reformer - control of alkylation process - Control of polyethylene production
– Control of VCM and PVC production
UNIT V SAFETY IN INSTRUMENTATION SYSTEMS 9
Area and material classification as per National Electric Code (NEC) - Classification as per
International Electrotechnical Commission (IEC) - Techniques used to reduce explosion
hazards - Pressurization techniques - Type X, Type Y and Type Z - Intrinsic safety - Mechanical
and Electrical isolation - Lower and Upper explosion limit
TOTAL : 45 PERIODS
OUTCOMES:
 understand the oil recovery methods, oil gas separation and the important derivatives
obtained from petroleum and its uses.
 gain knowledge on the most important variables to be monitored, measured and
controlled on selected unit operations in petrochemical industry
TEXT BOOKS:
1. Balchen J.G and Mumme K.I., Process Control Structures and Applications, Von
Nostrand Reinhold Company, New York, 1988.
2. www.scribd.com/doc/2336259/ABB-Oil-Gas-production-Hand-Book.
REFERENCES:
1. Liptak B.G., Instrumentation in Process Industries, Chilton Book Company, 2005.
2. Waddams A.L., Chemicals from Petroleum, Butter and Janner Ltd., 1968.
3. Ram Prasad, Petroleum Refining Technology, Khanna Publishers, New Delhi, 2000.
105
EI8010 OPTIMIZATION TECHNIQUES LTPC
3003
OBJECTIVES :
 learn the procedure to numerically solve different classes of optimization algorithms using
appropriate optimization techniques (Linear, Non linear and dynamic)
 understand procedure to select appropriate optimization algorithms for a given application
 gain knowledge about genetic Algorithms and its application in process control and
instrumentation.
Historical Development, Engineering application of Optimization, Formulation of design

problems as mathematical programming problems, classification of optimization problems.–
Case studies
UNIT II LINEAR PROGRAMMING 9
Graphical method, Simplex method, Revised simplex method, Duality in linear programming
(LP), Transportation, assignment and other applications.
UNIT III NON LINEAR PROGRAMMING 9
Unconstrained optimization techniques, Direct search methods, Descent methods, Constrained

optimization, Direct and indirect methods, Optimization with calculus, Khun-Tucker conditions.
UNIT IV DYNAMIC PROGRAMMING 9
Introduction, Sequential optimization, computational procedure, curse of dimensionality,

Applications in Control Engineering
UNIT V ADVANCED TECHNIQUES OF OPTIMIZATION 9
Introduction- Genetic algorithms for optimization and search – Multi-objective evolutionary

optimzation - The role of Pareto - optimal problems in Engineering Design and their solution
strategies based upon Genetic Algorithms – Usage in process control- Particle Swarm Optimization
106
TOTAL : 45 PERIODS
OUTCOMES:
 solve numerically different classes of optimization algorithms using appropriate
optimization techniques (Linear, Non linear and dynamic) and able to select appropriate
optimization algorithms for a given application
TEXT BOOK :
1. S.S. Rao, “Engineering Optimization: Theory and Practice”, New Age International (P)
REFERENCE BOOKS:
1. K. Deb, “Optimization for Engineering Design – Algorithms and Examples”,
Prentice- Hall of India Pvt. Ltd., New Delhi, 5 th Edition, 2004.
2. K. Deb, “Multi-Objective Optimization Using Evolutionary Algorithms”, John Wiley &
Sons (ASIA) Private Ltd. Singapore, 2004
EI8011 POWER ELECTRONICS DEVICES AND CIRCUIT L T P C

3 0 0 3
OBJECTIVES :
 understand the operation of controlled rectifiers, choppers, inverters and their
applications.
 learn the principle of step up and step down choppers
 study about voltage source inverter, current source inverter and PWM.
 Gain knowledge about the applications of power semiconductor devices for the speed
control of AC and DC motors.
UNIT I POWER SEMICONDUCTOR DEVICES AND CHARACTERISTICS 9
Operating principle and switching Characteristics - Power diodes - Power BJT, Power
MOSFET, IGBT, SCR,TRIAC, GTO, IGCT, MCT, Power integrated circuits (PIC) – Drive
and Protection circuits – Series and parallel operation of power devices – Commutation
–Simulation tools.
107
UNIT II CONTROLLED RECTIFIERS 9
Single phase – Three phase – Half controlled – Fully controlled rectifiers – Dual converters -
Effect of source and load inductance - AC voltage controllers – Phase control, Cycloconverters
PWM control, Transformer tap changers, Matrix converters.
UNIT III CHOPPERS 9
Step up and Step down Chopper – Chopper classification - quadrant of operation – Switching
mode Regulators - Buck, Boost, Buck-Boost, and Cuk Regulators.
UNIT IV INVERTERS 9
Voltage source Inverters - Bridge Inverters – Half bridge – Full bridge – Three Phase Bridge
Inverters - Voltage control – PWM Techniques – Current Source Inverters: –Capacitor
Commutated Inverter- Resonant inverters - Series, Parallel, Class E, ZVS, ZCS, DC link
-Introduction to multilevel Inverters.
UNIT V APPLICATION 9
Introduction to D.C and A.C drives – Electrical breaking - Open loop and Closed loop control
of drives (Block diagram approach only) – Principle of vector control of AC drives - Stepper
motor drives - Switched mode power supply - Introduction to HVDC and FACTS - Static VAR
compensators.
TOTAL : 45 PERIODS
OUTCOMES:
 understand the operation of controlled rectifiers, choppers, inverters and their
applications and gain knowledge in selection of power semiconductor devices for the
speed control of AC and DC motors.
TEXT BOOKS:
1. Rashid, M.H., “Power Electronics – Circuits, Devices and Applications”, PHI, 3rd Ed.,
2004.
2. Mohan, Udeland and Robbins., “Power Electronics”, John Wiley and Sons, New
York,1995.
REFERENCE BOOKS:
1. Singh, M.D. Khanchandani, K.B., “Power Electronics”, 2nd Ed., Tata McGraw-Hill, 2011.
108
2. Bose, B.K., “Modern Power Electronics and AC Drives”, Pearson Education, 2002.
3. Bimbra, P.S, “ Power Electronics”, Khanna Publishers, 2006.
4. Moorthi, V.R., “Power Electronics - Devices, Circuits and Industrial Applications”, Oxford
University Press, 2005
EI8012 REAL TIME EMBEDDED SYSTEMS LTPC

30 0 3
OBJECTIVES :
 gain knowledge on the selection of processor and software for embedded applications
 learn about the serial and parallel communication protocols.
 understand interrupt service mechanism and device drivers
 know the procedure to design RTOS based embedded system
 acquire knowledge on selected embedded system applications.
UNIT I INTRODUCTION TO EMBEDDED SYSTEMS 9
Build process for embedded systems - Structural units in Embedded processor , selection
of processor & memory devices - DMA – memory mapping - Timer and Counting devices,
Watchdog Timer, Real Time Clock - Software Embedded in a system - IDE, assembler, compiler,
linker, simulator, debugger, In circuit emulator, Target Hardware Debugging, Boundary Scan.
UNIT II EMBEDDED NETWORKING 9
Embedded Networking: Introduction, I/O Device Ports – Serial Bus communication protocols
- RS232 standard – RS485 – CAN Bus – RS485 - Serial Peripheral Interface (SPI) – Inter
Integrated Circuits (I2C) – PC Parallel port communication Protocols - network using ISA, PCI
- Wireless and Mobile System Protocols.
UNIT III DEVICE DRIVERS AND INTERRUPTS SERVICE MECHANISM 9
Programmed - I/O busy-wait approach without interrupt service mechanism - ISR concept -
interrupt sources – multiple interrupts – context and periods for context switching, interrupt
latency and deadline – Device Driver – Introduction to Basic Concept of Parallel port & Serial
port Device Drivers.
UNIT IV RTOS BASED EMBEDDED SYSTEM DESIGN 9
Introduction to basic concepts of RTOS- Task, process & threads, interrupt routines in
109
RTOS, Multiprocessing and Multitasking, Preemptive and Non-Preemptive scheduling,
Task communication-shared memory, message passing - Interprocess Communication
– Synchronization between processes - Semaphores, Mailbox, Pipes, Priority inversion,
Priority inheritance, Comparison of Real time Operating systems: VxWorks, µC/OS-II, RT
Linux.
UNIT V EMBEDDED SYSTEM APPLICATION WITH DEVELOPMENT 9
Case Study of Washing Machine- Automotive Application – RFID - System, Application, Tag,
Reader - Embedded Product Development Life Cycle, Objective, Need, different Phases &
Modelling of the EDLC.
TOTAL: 45 PERIODS
OUTCOMES:
 Gain knowledge on selection of processor and software for embedded applications and
get exposed to serial and parallel communication protocols.
 design RTOS based embedded system
TEXT BOOKS:
1. Rajkamal, ‘Embedded system-Architecture, Programming, Design’, TataMcgraw Hill,
2011.
2. Peckol,”Embedded System Design”, John Wiley,2010.
REFERENCES:
1. Tammy Noergaard, “Embedded Systems Architecture”, Elsevier, 2006
2. Han-Way Huang, ”Embedded system Design using C8051”, Cengage Learning, 2009
3. Rajib Mall “Real-Time systems Theory and Practice” Pearson Education, 2007
4. Shibu.k.v, “Introduction to Embedded Systems”, TataMcgraw Hill, 2009
EI8013 REAL TIME OPERATING SYSTEMS LTPC

3 0 0 3
OBJECTIVES :
 study the concepts of embedded programming and its implementation using C,C++
 learn the services provided by real time Operating systems.
110
 know about inter task communication and synchronization.
 understand Micro COS-11 and Vx works and its supported system level functions.
 learn the concept of RTOS using typical case studies.
UNIT I CONCEPTS AND EMBEDDED PROGRAMMING IN C, C++ 10
Programming in assembly language (ALP) vs. High Level Language - C Program Elements,
Macros and functions -Use of Pointers - NULL Pointers - Use of Function Calls – Multiple
function calls in a Cyclic Order in the Main Function Pointers – Function Queues and Interrupt
Service Routines Queues Pointers – Concepts of EMBEDDED PROGRAMMING in C++ -
Objected Oriented Programming – Embedded Programming in C++, ‘C’ Program compilers
– Cross compiler – Optimization of memory codes.
UNIT II REAL TIME OPERATING SYSTEMS– PART - 1 11
Definitions of process, tasks and threads – Clear cut distinction between functions – ISRs
and tasks by their characteristics – Operating System Services- Goals – Structures- Kernel
- Process Management – Memory Management – Device Management – File System
Organisation and Implementation – I/O Subsystems – Interrupt Routines Handling in RTOS,
REAL TIME OPERATING SYSTEMS : RTOS Task scheduling models - Handling of task
scheduling and latency and deadlines as performance metrics – Co-operative Round Robin
Scheduling – Cyclic Scheduling with Time Slicing (Rate Monotonics Co-operative Scheduling)
– Preemptive Scheduling Model strategy by a Scheduler – Critical Section Service by a
Preemptive Scheduler – Fixed (Static) Real time scheduling of tasks - INTER PROCESS
UNIT III COMMUNICATION AND SYNCHRONISATION 8
Shared data problem – Use of Semaphore(s) – Priority Inversion Problem and Deadlock
Situations – Inter Process Communications using Signals – Semaphore Flag or mutex as
Resource key – Message Queues – Mailboxes – Pipes – Virtual (Logical) Sockets – Remote
Procedure Calls (RPCs).
UNIT IV REAL TIME OPERATING SYSTEMS – PART - 2 9
Study of Micro C/OS-II or Vx Works or Any other popular RTOS – RTOS System Level Functions
– Task Service Functions – Time Delay Functions – Memory Allocation Related Functions –
Semaphore Related Functions – Mailbox Related Functions – Queue Related Functions –
UNIT V CASE STUDIES 7
Case Studies of Programming with RTOS – Understanding Case Definition – Multiple Tasks
111
and their functions – Creating a list of tasks – Functions and IPCs – Exemplary Coding Steps.
TOTAL : 45 PERIODS
OUTCOMES:
 understand the concepts of embedded programming and its implementation using C,C++
and get exposed to Micro COS-11 and Vx works and its supported system level
functions.
 Understand the concept of RTOS using typical case studies.
TEXT BOOKS
1. Rajkamal, Embedded Systems Architecture, Programming and Design, TATA McGraw-
Hill, First reprint Oct. 2003
REFERENCES
1. Steve Heath, Embedded Systems Design, Second Edition-2003, Newnes,
2. David E.Simon, An Embedded Software Primer, Pearson Education Asia, First Indian
Reprint 2000.
3. Wayne Wolf, Computers as Components; Principles of Embedded Computing System
Design – Harcourt India, Morgan Kaufman Publishers, First Indian Reprint 2001
4. Frank Vahid and Tony Givargis, Embedded Systems Design – A unified Hardware /
Software Introduction, John Wiley, 2002.
EI8014 ROBOTICS AND AUTOMATION LTPC

3 00 3
OBJECTIVES :
 To study and understand the evolution of robot technology and their classification.
 To introduce the methodology for mathematical representation of different types of
robots.
 To acquire knowledge on construction of manipulators and their types.
 To learn the procedure for carrying out kinematics and path learning techniques.
 To expose knowledge on the case studies and design of robot machine interface.
UNIT I BASIC CONCEPTS 9
Brief history -Types of Robot – Technology - Robot classifications and specifications - Design
112
and control issues- Various manipulators – Sensors - work cell - Programming languages
UNIT II DIRECT AND INVERSE KINEMATICS 9
Mathematical representation of Robots - Position and orientation - Homogeneous

transformation - Various joints - Representation using the Denavit Hattenberg parameters
- Degrees of freedom - Direct kinematics - Inverse kinematics - PUMA 560 & SCARA robots-
Solvability - Solution methods-Closed form solution
UNIT III MANIPULATOR DIFFERENTIAL MOTION AND STATICS 9
Linear and angular velocities - Manipulator Jacobian - Prismatic and rotary joints – Inverse
-Wrist and arm singularity - Static analysis - Force and moment Balance
UNIT IV PATH PLANNING 9
Definition - Joint space technique - Use of p-degree polynomial - Cubic polynomial - Cartesian
space technique - Parametric descriptions - Straight line and circular paths - Position and
orientation planning
UNIT V DYNAMICS AND CONTROL 9
Lagrangian mechanics - 2 DOF Manipulator - Lagrange Euler formulation - Dynamic model

-Manipulator control problem - Linear control schemes - PID control scheme - Force control
of robotic manipulator
TOTAL: 45 PERIODS
OUTCOMES:
 understand the evolution of robot technology and mathematically represent different types
of robot.
 Get exposed to the case studies and design of robot machine interface.
TEXTBOOKS
1. R. K. Mittal and I. J. Nagrath, Robotics and Control, Tata McGraw Hill, New Delhi, 4th
Reprint, 2005
2. John J. Craig, Introduction to Robotics Mechanics and Control, Third edition, Pearson
Education, 2009
113
REFERENCES
1. Ashitava Ghoshal, Robotics - Fundamental Concepts and Analysis’, Oxford University
Press, Sixth impression, 2010
2. K. K. Appu Kuttan, Robotics, I K International, 2007
3. Edwin Wise, Applied Robotics, Cengage Learning, 2003
4. R. D. Klafter, T. A. Chimielewski and M. Negin, Robotic Engineering – An Integrated
Approach, Prentice Hall of India, New Delhi, 1994
5. M. P. Groover, M. Weiss, R. N. Nagel and N. G. Odrej, Industrial Robotics, McGraw-Hill
Singapore, 1996
6. B.K. Ghosh, Control in Robotics and Automation: Sensor Based Integration, Allied
Publishers, Chennai, 1998
EI8015 SYSTEM IDENTIFICATION AND ADAPTIVE CONTROL LTPC

3 003
OBJECTIVES :
 understand non parametric methods of system identification
 gain knowledge about different types of parametric estimation methods such as prediction
error and instrumental variable methods.
 Learn about the recursive identification methods and their applications
 Know the design procedure of adaptive control schemes for linear and non linear systems
 explore the case studies on adaptive control system
UNIT I NON PARAMETRIC METHODS 9
Nonparametric methods : Transient analysis – frequency analysis – Correlation analysis –

Spectral analysis.
UNIT II PARAMETER ESTIMATION METHODS 9

Least square estimation – best linear unbiased estimation under linear constraints –
updating the parameter estimates for linear regression models – prediction error methods:
description of prediction methods – optimal prediction – relation between prediction
error methods and other identification methods – theoretical analysis - Instrumental
variable methods: Description of instrumental variable methods – Input signal design for
identification
114
UNIT III RECURSIVE IDENTIFICATION METHODS 9
The recursive least square method – the recursive instrumental variable methods- the
recursive prediction error methods – Maximum likelihood. Identification of systems operating
in closed loop: Identifiability considerations – direct identification – indirect identification
UNIT IV ADAPTIVE CONTROL SCHEMES 9
Introduction – Types of adaptive control – Gain scheduling controller – Model reference

adaptive control schemes – Self tuning controller – MRAC and STC : Approaches – The
Gradient approach – Lyapunov functions – Passivity theory – pole placement method –
Minimum variance control – Predictive control.
UNIT V ISSUES IN ADAPTIVE CONTROL AND APPLICATIONS 9
Stability – Convergence – Robustness – Applications of adaptive control
TOTAL: 45 PERIODS
OUTCOMES:
 understand parametric and non parametric methods of system identification
 design appropriate adaptive control schemes for linear and non linear systems and get
exposed to case studies of adaptive control system
TEXT BOOKS:
1. Soderstorm T and Peter Stoica, System Identification, Prentice Hall International,
1989.
2. Astrom, K.J. and Wittenmark, B., “Adaptive Control” , Pearson Education, 2nd Edition,
2001
REFERENCES:
1. Ljung L, System Identification: Theory for the user, Prentice Hall, Englewood Cliffs,1987.
2. Sastry, S. and Bodson, M., “Adaptive Control – Stability, Convergence and Robustness”,
Prentice Hall inc., New Jersey, 1989
115
EI8016 THERMAL POWER PLANT INSTRUMENTATION L T P C
3 0 0 3
OBJECTIVES :
 gain knowledge about different types of power plants.
 study about the methods used for measurement of process variables related to thermal
power plant.
 learn the different control schemes for boiler and its auxiliary units.
 study the concept of burner management system.
 Understand the different configuration of turbine control system.
UNIT I OVERVIEW OF POWER GENERATION 9
Survey of methods of power generation – hydro, thermal, nuclear, solar and wind power –
Importance of instrumentation in power generation – Thermal power plant – Building blocks –
Combined Cycle System – Combined Heat and Power System – sub critical and supercritical
boilers.
UNIT II MEASUREMENTS IN POWER PLANTS 9
Measurement of feed water flow, air flow, steam flow and coal flow – Drum level measurement
– Steam pressure and temperature measurement – Turbine speed and vibration measurement
– Flue gas analyzer – Fuel composition analyzer.
UNIT III BOILER CONTROL – I 9
Combustion of fuel and excess air – Firing rate demand – Steam temperature control – Control of
deaerator – Drum level control – Single, two and three element control – Furnace draft control –
implosion – flue gas dew point control – Trimming of combustion air – Soot blowing.
UNIT IV BOILER CONTROL – II 9
Burners for liquid and solid fuels – Burner management – Furnace safety interlocks – Coal
pulverizer control – Combustion control for liquid and solid fuel fired boilers – air/fuel ratio
control – fluidized bed boiler – Cyclone furnace.
UNIT V CONTROL OF TURBINE 9
Types of steam turbines – impulse and reaction turbines – compounding – Turbine governing
system – Speed and Load control – Transient speed rise – Free governor mode operation –
116
Automatic Load Frequency Control – Turbine oil system – Oil pressure drop relay – Oil cooling
system – Turbine run up system.
TOTAL: 45 PERIODS
OUTCOMES:
 gain knowledge about different types of power plants, measurements involved in thermal
power plant.
 understand the different control schemes for boiler, turbine and their auxiliary units.
TEXT BOOKS
1. Sam Dukelow, Control of Boilers, Instrument Society of America, 1991.
2. Krishnaswamy.K and Ponnibala.M., Power Plant Instrumentation, PHI Learning Pvt.
REFERENCES
1. Liptak B.G., Instrumentation in Process Industries, Chilton Book Company,2005.
2. Jain R.K., Mechanical and Industrial Measurements, Khanna Publishers, New Delhi,
1999.
EI8017 UNIT OPERATIONS AND CONTROL LTPC

3003
OBJECTIVES :
 study the unit operations involved for transportation, mixing and separation.
 Understand the basic operations involved with heat exchangers, evaporators and
crystallisers.
 gain knowledge on the operation of dryers, distillation column, refrigerators and chemical
reactors.
 study about the different unit operations involved in paper and pulp,steel industry,
thermal power plant, pharmaceutical and leather industries
UNIT I UNIT OPERATIONS 9
Unit operations-transport of liquids, solids and gases adjusting particle size of bulk solids –
mixing processes – separation processes.
117
UNIT II COMBUSTION PROCESSES 9
Combustion processes – heat exchangers – energy balance material balance – evaporators

–crystallization.
UNIT III OTHER OPERATIONS 9
Drying – distillation – refrigeration process – chemical reactions.
UNIT IV CASE STUDY – I 9
Operations in the manufacture of paper and pulp – operations in steel industry.
UNIT V CASE STUDY – II 9
Operations in thermal power plant – operations in pharmaceutical industry and leather industry.
TOTAL : 45 PERIODS
OUTCOMES:
 gain knowledge of unit operation involved for transportation mixing and separation, heat
exchangers, evaporators, crystallizers etc.
 Gain knowledge on unit operations involved in paper & pulp, steel, thermal power plant,
pharmaceutical and leather industry
TEXT BOOK:
1. Balchen J.G. and Mumme, K.J., Process Control structures and applications, Van
Nostrand Reinhold Co., New York, 1988.
REFERENCES:
1. Waddams, A.L., Chemicals from petroleum, Butler and Tanner Ltd., UK, 1968.
2. Austin, G.t. shreve’s Chemical Process industries, McGraw-Hill International student
edition, Singapore, 1985.
3. Liptak, B.G., Process measurement and analysis, Chilton Book Company, USA, 1995
4. Luyben W.C., Process Modelling, Simulation and Control for Chemical Engineers,
McGraw-Hill International edition, USA, 1989.
118
EI8018 VIRTUAL INSTRUMENTATION LTPC
3003
OBJECTIVES :
 gain knowledge about basic concepts in Virtual Instrumentation and its related software.
 understand the concepts of Data acquisition, Timers and Counters for carrying out real
time projects.
 study about the different communication networked modules
 know the procedure and implementation of modelling and control of real time processes
in LabVIEW Platform..
 learn PC based digital storage oscilloscope, spectrum analyser, distributed monitoring
and control devices.
Virtual Instrumentation: Historical perspective - advantages - block diagram and architecture

of a virtual instrument - Conventional Instruments versus Virtual Instruments - data-flow
techniques, graphical programming in data flow, comparison with conventional programming.
UNIT II VI PROGRAMMING TECHNIQUES 9
VIs and sub-VIs, loops and charts, arrays, clusters and graphs, case and sequence structures,
formula nodes, local and global variables, State machine, string and file I/O, Instrument
Drivers, Publishing measurement data in the web.
UNIT III DATA ACQUISITION 9
Introduction to data acquisition, Sampling fundamentals, Input/Output techniques and Latest

ADCs, DACs, Digital I/O, counters and timers, DMA, Software and hardware installation,
Calibration, Resolution, Data acquisition interface requirements – Issues involved in selection
of Data acquisition cards – Data acquisition cards with serial communication - VI Chassis
requirements. SCSI, PCI, PXI system controllers, Ethernet control of PXI. Networking basics
for office & Industrial applications, VISA and IVI.
UNIT IV VI TOOLSETS 9
Use of Analysis tools, Fourier transforms, power spectrum, correlation methods, windowing
and filtering. Application of VI in process control designing of equipments like oscilloscope,
119
Digital multimeter, Design of digital Voltmeters with transducer input. Virtual Laboratory, Web
based Laboratory
UNIT V APPLICATIONS 9
Distributed I/O modules - Application of Virtual Instrumentation: Instrument Control,

Development of process database management system, Simulation of systems using VI,
Development of Control system, Industrial Communication, Image acquisition and processing,
Motion control. Development of Virtual Instrument using GUI, Real-time systems, Embedded
Controller, OPC, HMI / SCADA software, Active X programming.
TOTAL : 45 PERIODS
OUTCOMES:
 Gain knowledge about basic concepts in Virtual Instrumentation and ability to design and
implement process.
 Get exposed to PC based digital storage oscilloscope, spectrum analyser, distributed
monitoring and control devices.
TEXTBOOKS:
1. Gary Johnson, LabVIEW Graphical Programming, Second edition, McGraw Hill,
Newyork, 1997.
2. Lisa K. wells & Jeffrey Travis, LabVIEW for everyone, Prentice Hall, New Jersey,
1997.
REFERENCES:
1. Kevin James, PC Interfacing and Data Acquisition: Techniques for Measurement,
Instrumentation and Control, Newnes, 2000.
EI8071 INDUSTRIAL DATA NETWORKS LTPC

30 0 3
OBJECTIVES :
 gain knowledge on the serial interface standards.
 understand the principle of network architecture and protocol stack.
 study about the characteristics and functions of the individual layers of the protocol stack
 learn about the wired and wireless communication protocols used in industrial networks.
120
UNIT I RS – 232 AND RS – 485 9
ISO-OSI model – EIA 232 Interface standard – EIA 422 interface standard – 20mA current
loop – Serial interface converters.
UNIT II MODBUS DATA HIGHWAY (PLUS) AND HART PROTOCOLS 9

MODBUS protocol structure – Function codes – Troubleshooting – Data highway (plus)
protocols – Review of HART Protocol.
UNIT III AS – INTREFACE AND DEVICENET 9

AS interfaces:- Introduction, Physical layer, Data link layer and Operating characteristics.
Devicenet:- Introduction, Physical layer, Data link layer and Application layer.
UNIT IV PROFIBUS PA/DP/FMS AND FF 9

Profibus:- Introduction, Profibus protocol stack, Profibus communication model, Communication
objects, System operations and Troubleshooting – Foundation fieldbus versus Profibus.
UNIT V INDUSTRIAL ETHERNET AND WIRELESS COMMUNICATION 9

Industrial Ethernet:- Introduction, 10Mbps Ethernet and 100Mbps Ethernet – Radio and
wireless communication:- Introduction, Components of radio link, radio spectrum and
frequency allocation and radio modems – Comparison of various industrial networks.
TOTAL : 45 PERIODS
OUTCOMES:
 Gain knowledge on the serial interface standards, network architecture and protocol
stack
 Get familiarized with the wired and wireless communication protocols used in industrial
networks.
TEXT BOOKS:
1. Mackay, S., Wrijut, E., Reynders, D. and Park, J., “practical Industrial Data Networks
Design, installation and Troubleshooting”, Newnes Publications, Elsevier, 1st Edition,
2004.
2. Buchanan, W., “Computer Buses”, CRC Press, 2000,
REFRENCES:
1. Tanenbaum, A.S., “Modern Operating Systems”, Prentice Hall of India Pvt.Ltd.,2003.
121
2. Rappaport,T.S., “Wireless Communication: principles and Practice” 2nd Edition, Prentice
Hall of India, 2001
3. Stallings,W., “wireless Communication and networks”, 2nd Edition, Prentice Hall of
India, 2005
GE8072 DISASTER MANAGEMENT LTPC

300 3
OBJECTIVES:
 To provide students an exposure to disasters, their significance and types.
 To ensure that students begin to understand the relationship between vulnerability,
disasters, disaster prevention and risk reduction
 To gain a preliminary understanding of approaches of Disaster Risk Reduction (DRR)
 To enhance awareness of institutional processes in the country and
 To develop rudimentary ability to respond to their surroundings with potential
disaster response in areas where they live, with due sensitivity
UNIT I INTRODUCTION TO DISASTERS 9

Definition: Disaster, Hazard, Vulnerability, Resilience, Risks – Disasters: Types of disasters –
Earthquake, Landslide, Flood, Drought, Fire etc - Classification, Causes, Impacts including
social, economic, political, environmental, health, psychosocial, etc.- Differential impacts- in
terms of caste, class, gender, age, location, disability - Global trends in disasters: urban
disasters, pandemics, complex emergencies, Climate change- Dos and Don’ts during various
types of Disasters.
UNIT II APPROACHES TO DISASTER RISK REDUCTION (DRR) 9

Disaster cycle - Phases, Culture of safety, prevention, mitigation and preparedness community
based DRR, Structural- nonstructural measures, Roles and responsibilities of- community,
Panchayati Raj Institutions/Urban Local Bodies (PRIs/ULBs), States, Centre, and other stake-
holders- Institutional Processess and Framework at State and Central Level- State Disaster
Management Authority(SDMA) – Early Warning System – Advisories from Appropriate
Agencies.
UNIT III INTER-RELATIONSHIP BETWEEN DISASTERS AND DEVELOPMENT 9

Factors affecting Vulnerabilities, differential impacts, impact of Development projects such as
dams, embankments, changes in Land-use etc.- Climate Change Adaptation- IPCC Scenario
and Scenarios in the context of India - Relevance of indigenous knowledge, appropriate
technology and local resources.
122
UNIT IV DISASTER RISK MANAGEMENT IN INDIA 9
Hazard and Vulnerability profile of India, Components of Disaster Relief: Water, Food,
Sanitation, Shelter, Health, Waste Management, Institutional arrangements (Mitigation,
Response and Preparedness, Disaster Management Act and Policy - Other related policies,
plans, programmes and legislation – Role of GIS and Information Technology Components in
Preparedness, Risk Assessment, Response and Recovery Phases of Disaster – Disaster
Damage Assessment.
UNIT V DISASTER MANAGEMENT: APPLICATIONS AND CASE STUDIES AND

FIELD WORKS 9
Landslide Hazard Zonation: Case Studies, Earthquake Vulnerability Assessment of Buildings
and Infrastructure: Case Studies, Drought Assessment: Case Studies, Coastal Flooding: Storm
Surge Assessment, Floods: Fluvial and Pluvial Flooding: Case Studies; Forest Fire: Case
Studies, Man Made disasters: Case Studies, Space Based Inputs for Disaster Mitigation and
Management and field works related to disaster management.
TOTAL: 45 PERIODS
OUTCOMES:
The students will be able to
 Differentiate the types of disasters, causes and their impact on environment and society
 Assess vulnerability and various methods of risk reduction measures as well as mitigation.
 Draw the hazard and vulnerability profile of India, Scenarious in the Indian context,
Disaster damage assessment and management.
TEXTBOOKS:
1. Singhal J.P. “Disaster Management”, Laxmi Publications, 2010. ISBN-10: 9380386427
ISBN-13: 978-9380386423
2. Tushar Bhattacharya, “Disaster Science and Management”, McGraw Hill India Education
Pvt. Ltd., 2012. ISBN-10: 1259007367, ISBN-13: 978-1259007361]
3. Gupta Anil K, Sreeja S. Nair. Environmental Knowledge for Disaster Risk Management,
NIDM, New Delhi, 2011
4. Kapur Anu Vulnerable India: A Geographical Study of Disasters, IIAS and Sage Publishers,
New Delhi, 2010.
REFERENCES
1. Govt. of India: Disaster Management Act , Government of India, New Delhi, 2005
2. Government of India, National Disaster Management Policy,2009.
123
GE8073 HUMAN RIGHTS LT P C
3003
OBJECTIVES :
 To sensitize the Engineering students to various aspects of Human Rights.
UNIT I 9
Human Rights – Meaning, origin and Development. Notion and classification of Rights –
Natural, Moral and Legal Rights. Civil and Political Rights, Economic, Social and Cultural
Rights; collective / Solidarity Rights.
UNIT II 9
Evolution of the concept of Human Rights Magana carta – Geneva convention of 1864.
Universal Declaration of Human Rights, 1948. Theories of Human Rights.
UNIT III 9
Theories and perspectives of UN Laws – UN Agencies to monitor and compliance.
UNIT IV 9
Human Rights in India – Constitutional Provisions / Guarantees.
UNIT V 9
Human Rights of Disadvantaged People – Women, Children, Displaced persons and Disabled
persons, including Aged and HIV Infected People. Implementation of Human Rights – National
and State Human Rights Commission – Judiciary – Role of NGO’s, Media, Educational
Institutions, Social Movements.
TOTAL : 45 PERIODS
OUTCOMES :
 Engineering students will acquire the basic knowledge of human rights.
REFERENCES:
1. Kapoor S.K., “Human Rights under International law and Indian Laws”, Central Law
Agency, Allahabad, 2014.
2. Chandra U., “Human Rights”, Allahabad Law Agency, Allahabad, 2014.
3. Upendra Baxi, The Future of Human Rights, Oxford University Press, New Delhi.
124

Anna University Chennai CHENNAI - 600 025: B.E - Electronics and Instrumentation Engineering (Full Time)

Uploaded by

Copyright:

Available Formats

Anna University Chennai CHENNAI - 600 025: B.E - Electronics and Instrumentation Engineering (Full Time)

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Anna University Chennai CHENNAI - 600 025: B.E - Electronics and Instrumentation Engineering (Full Time)

Uploaded by

Copyright:

Available Formats

ANNA UNIVERSITY CHENNAI

CHENNAI - 600 025

B.E . ELECTRONICS AND

Bachelor of Electronics and Instrumentation Engineering curriculum is designed to prepare the

4 EI8302 Electrical Machines 3 0 0 3

CODE NO. COURSE TITLE L T P C

GE8073 Human Rights 3 0 0 3

UNIT III 9+3

UNIT I MATRICES 9+3

Eigenvalues and Eigenvectors of a real matrix – Characteristic equation – Properties of

UNIT II INFINITE SERIES 9+3

Sequences – Convergence of series – General properties – Series of positive terms – Tests

UNIT II FUNCTIONS OF SEVERAL VARIABLES 9+3

UNIT V MULTIPLE INTEGRALS 9+3

Double integrals – Change of order of integration – Double integrals in polar coordinates –

1. Grewal B.S., “Higher Engineering Mathematics”, Khanna Publishers, New

PH8151 ENGINEERING PHYSICS LTPC

UNIT II ACOUSTICS AND ULTRASONICS 9

UNIT III THERMAL PHYSICS 9

UNIT IV APPLIED OPTICS 9

UNIT V SOLID STATE PHYSICS 9

CY8151 ENGINEERING CHEMISTRY LTPC

UNIT I CHEMICAL THERMODYNAMICS 9

UNIT II POLYMER CHEMISTRY 9

UNIT III KINETICS AND CATALYSIS 9

UNIT IV PHOTOCHEMISTRY AND SPECTROSCOPY 9

GE8151 COMPUTING TECHNIQUES LT P C

UNIT III ARRAYS AND STRINGS 9

UNIT IV FUNCTIONS AND POINTERS 9

UNIT V STRUCTURES AND UNIONS 9

CONCEPTS AND CONVENTIONS (NOT FOR EXAMINATION) 1

UNIT I PLANE CURVES AND FREE HAND SKETCHING 14

Basic Geometrical constructions, Curves used in engineering practices

UNIT II PROJECTION OF POINTS, LINES AND PLANE SURFACES 14

UNIT III PROJECTION OF SOLIDS 14

UNIT IV PROJECTION OF SECTIONED SOLIDS AND DEVELOPMENT OF

UNIT V ISOMETRIC AND PERSPECTIVE PROJECTIONS 15

COMPUTER AIDED DRAFTING (DEMONSTRATION ONLY) 3

PUBLICATION OF BUREAU OF INDIAN STANDARDS:

SPECIAL POINTS APPLICABLE TO UNIVERSITY EXAMINATIONS ON ENGINEERING

1. Torsional pendulum Determination of rigidity modulus of wire and moment of

4. Potentiometer Determination of thermo e.m.f. of thermocouple

 Apply good programming design methods for program development.

GE8162 ENGINEERING PRACTICES LABORATORY LTPC

1. CIVIL ENGINEERING PRACTICE 12

Laying pipe connection to the suction side of a pump – inlet. Laying

pipe connection to the delivery side of a pump – out let.

2. ELECTRICAL ENGINEERING PRACTICE 9

• Basic household wiring using switches, fuse, indicator – lamp etc.,

GROUP – B (MECHANICAL AND ELECTRONICS) 15

3. MECHANICAL ENGINEERING PRACTICE

Centrifugal pump, mixies and air conditioners.

(b) Foundry operation like mould preparation for grooved pulley.

4. ELECTRONIC ENGINEERING PRACTICE 9

• Soldering simple electronic circuits and checking continuity.

• To make the student acquire sound knowledge of techniques in solving ordinary

UNIT I DIFFERENTIAL EQUATIONS 9+3

Method of variation of parameters – Method of undetermined coefficients – Homogenous

UNIT II VECTOR CALCULUS 9+3