Scribd
Upload
11 views

Amazing Functions

1. The document discusses inverse functions and how two functions can undo each other's operations on a number. 2. It provides examples of evaluating functions f(x) and g(x) and their inverses on sample inputs to show they return the original values. 3. The process for finding the inverse of a function is outlined as replacing variables, solving for y, and verifying the compositions are identities. Examples are worked through.

Uploaded by

Pops Maellard
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
11 views

Amazing Functions

1. The document discusses inverse functions and how two functions can undo each other's operations on a number. 2. It provides examples of evaluating functions f(x) and g(x) and their inverses on sample inputs to show they return the original values. 3. The process for finding the inverse of a function is outlined as replacing variables, solving for y, and verifying the compositions are identities. Examples are worked through.

Uploaded by

Pops Maellard
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

there is a nice relationship between these two functions.

Let’s see just what


that relationship is. Consider the following evaluations.

f(−1)=3(−1)−2=−5⇒g(−5)=−53+23=−33=−1g(2)=23+23=43⇒f(43)=3(43)−2=4−2
=2�(−1)=3(−1)−2=−5⇒�(−5)=−53+23=−33=−1�(2)=23+23=43⇒�(43)=3
(43)−2=4−2=2

In the first case we plugged x=−1�=−1 into f(x)�(�) and got a value


of −5−5. We then turned around and plugged x=−5�=−5 into g(x)�(�) and
got a value of -1, the number that we started off with.

In the second case we did something similar. Here we


plugged x=2�=2 into g(x)�(�) and got a value of4343, we turned around and
plugged this into f(x)�(�) and got a value of 2, which is again the number
that we started with.

Note that we really are doing some function composition here. The first case
is really,

(g∘f)(−1)=g[f(−1)]=g[−5]=−1(�∘�)(−1)=�[�(−1)]=�[−5]=−1

and the second case is really,

(f∘g)(2)=f[g(2)]=f[43]=2(�∘�)(2)=�[�(2)]=�[43]=2

Note as well that these both agree with the formula for the compositions that
we found in the previous section. We get back out of the function evaluation
the number that we originally plugged into the composition.

So, just what is going on here? In some way we can think of these two
functions as undoing what the other did to a number. In the first case we
plugged x=−1�=−1 into f(x)�(�) and then plugged the result from this
function evaluation back into g(x)�(�) and in some way g(x)�(�) undid
what f(x)�(�) had done to x=−1�=−1 and gave us back the original x� that
we started with.

Function pairs that exhibit this behavior are called inverse functions. Before
formally defining inverse functions and the notation that we’re going to use for
them we need to get a definition out of the way.
A function is called one-to-one if no two values of x� produce the same y�.
Mathematically this is the same as saying,

f(x1)≠f(x2)wheneverx1≠x2�(�1)≠�(�2)whenever�1≠�2

So, a function is one-to-one if whenever we plug different values into the


function we get different function values.

Sometimes it is easier to understand this definition if we see a function that


isn’t one-to-one. Let’s take a look at a function that isn’t one-to-one. The
function f(x)=x2�(�)=�2 is not one-to-one because
both f(−2)=4�(−2)=4 and f(2)=4�(2)=4. In other words, there are two
different values of x� that produce the same value of y�. Note that we can
turn f(x)=x2�(�)=�2 into a one-to-one function if we restrict ourselves
to 0≤x<∞0≤�<∞. This can sometimes be done with functions.

Showing that a function is one-to-one is often tedious and/or difficult. For the
most part we are going to assume that the functions that we’re going to be
dealing with in this course are either one-to-one or we have restricted the
domain of the function to get it to be a one-to-one function.

Now, let’s formally define just what inverse functions are. Given two one-to-
one functions f(x)�(�) and g(x)�(�) if

(f∘g)(x)=xAND(g∘f)(x)=x(�∘�)(�)=�AND(�∘�)(�)=�

then we say that f(x)�(�) and g(x)�(�) are inverses of each other. More


specifically we will say that g(x)�(�) is the inverse of f(x)�(�) and denote
it by

g(x)=f−1(x)�(�)=�−1(�)

Likewise, we could also say that f(x)�(�) is the inverse of g(x)�(�) and


denote it by

f(x)=g−1(x)�(�)=�−1(�)

The notation that we use really depends upon the problem. In most cases
either is acceptable.
For the two functions that we started off this section with we could write either
of the following two sets of notation.

f(x)=3x−2f−1(x)=x3+23g(x)=x3+23g−1(x)=3x−2�(�)=3�−2�−1(�)=�3+23
�(�)=�3+23�−1(�)=3�−2

Now, be careful with the notation for inverses. The “-1” is NOT an exponent
despite the fact that it sure does look like one! When dealing with inverse
functions we’ve got to remember that

f−1(x)≠1f(x)�−1(�)≠1�(�)

This is one of the more common mistakes that students make when first
studying inverse functions.

The process for finding the inverse of a function is a fairly simple one although
there are a couple of steps that can on occasion be somewhat messy. Here is
the process

Finding the Inverse of a Function

Given the function f(x)�(�) we want to find the inverse


function, f−1(x)�−1(�).

1. First, replace f(x)�(�) with y�. This is done to make the rest of the


process easier.
2. Replace every x� with a y� and replace every y� with an x�.
3. Solve the equation from Step 2 for y�. This is the step where mistakes
are most often made so be careful with this step.
4. Replace y� with f−1(x)�−1(�). In other words, we’ve managed to find
the inverse at this point!
5. Verify your work by checking that(f∘f−1)(x)=x(�∘�−1)(�)=�and(f−1∘f)
(x)=x(�−1∘�)(�)=�are both true. This work can sometimes be
messy making it easy to make mistakes so again be careful.

That’s the process. Most of the steps are not all that bad but as mentioned in
the process there are a couple of steps that we really need to be careful with
since it is easy to make mistakes in those steps.

In the verification step we technically really do need to check that both (f∘f−1)


(x)=x(�∘�−1)(�)=� and (f−1∘f)(x)=x(�−1∘�)(�)=� are true. For all the
functions that we are going to be looking at in this course if one is true then
the other will also be true. However, there are functions (they are beyond the
scope of this course however) for which it is possible for only one of these to
be true. This is brought up because in all the problems here we will be just
checking one of them. We just need to always remember that technically we
should check both.

Let’s work some examples.

Example 1 Given f(x)=3x−2�(�)=3�−2 find f−1(x)�−1(�).
Show Solution 

Example 2 Given g(x)=√ x−3 �(�)=�−3 find g−1(x)�−1(�).


Show Solution 

The next example can be a little messy so be careful with the work here.

Example 3 Given h(x)=x+42x−5ℎ(�)=�+42�−5 find h−1(x)ℎ−1(�).
Show Solution 

There is one final topic that we need to address quickly before we leave this
section. There is an interesting relationship between the graph of a function
and the graph of its inverse.

Here is the graph of the function and inverse from the first two examples.

You might also like