Iso 2795

Download as pdf or txt
Download as pdf or txt
You are on page 1of 32

ISSUE 1/1/2012

SINTERED BEARINGS

See also: Bearings and Components Catalogue

Tel +44 (0)1235 462500 • Fax +44 (0)1235 462519


E-mail [email protected]
LRQ 0960929

Contents
Page
Company Profile 1-2
ISO Certificate 2
The Industry Standard 3
Metric Plain Bearings to ISO 2795 4-5
Metric Flanged Bearings to ISO 2795 6
German Metric Plain Bearings to DIN 1850 (G7/r6 tolerances) 7
German Metric Flanged Bearings to DIN 1850 (G7/r6 tolerances) 7
French Metric Plain Bearings (F7 / s7 – F8/s8 tolerances) 8
French Metric Flanged Bearings (F8 / s8 tolerances) 9
Inch Plain Bearings 10
Inch Flanged Bearings 11
Inch Thrust Washers 11
Cored Bars 12
Solid Bars 13
Plates and Discs 13
Metric Spherical Bearings 14

Technical Data
Technical Information and Fitting Recommendation 16
Materials and Lubricants 17
Metric Plain Bearings to ISO 2795 – Fitting Data 18
Metric Flanged Bearings to ISO 2795 – Fitting Data 19
German Metric Plain Bearings to DIN 1850 – Fitting Data 20
German Metric Flanged Bearings to DIN 1850 – Fitting Data 20
French Metric Plain Bearings – Fitting Data 21
French Metric Flanged Bearings – Fitting Data 22
Inch Plain Bearings – Fitting Data 23
Inch Flanged Bearings – Fitting Data 24
Machining Recommendations 25
Inspection Room 26
Structural Parts 27
Other Bearings and Components 28
Further Company Information 29

BOWMAN INTERNATIONAL LIMITED


10 Isis Court, Wyndyke Furlong, Abingdon Business Park, Abingdon, Oxfordshire, OX14 1DZ England
Tel +44 (0)1235 462500 Fax +44 (0)1235 462519 E-mail [email protected] Website www.bowman.co.uk
LRQ 0960929

greatly expanded our ranges of sintered bearings and our


Introduction sintered component capabilities.

A new automated warehouse was opened in 2008 which


We pride ourselves in giving excellent service which includes:
stores more than £2,000,000 of stock.
 Full design aid service
Bowman’s product range covers:-
 Competitive pricing and payment terms
 Large stocks  Oilite® “ Oilube®” bronze and iron sintered bearings
 Overnight delivery  Sintered components
 Just-in-time/kan ban scheduling  Wrapped bearings
 Full technical and design service  White metal bearings
 Machining facility for special sizes of bearings and  Solid bronze bearings
carbon products  Plastic bearings
 Composite bearings
Bowman was founded in 1972 and in 1984 the manufacture
 Carbon bearings
of certain products commenced. As well as its own
 Special designed bearings
manufacture, the company holds exclusive agencies of
 Brushes for electric motors & slip rings
other manufacturer’s products, which complement
 Carbon seals & products
Bowman’s range.
 Flexible shaft couplings
Bowman International Limited was first approved for ISO  Ball bearings
9001: 1994 in 1999 and in 2010 was approved to the later  Needle bearings
approval BS EN ISO 9001: 2008 (Certificate No. 960929).
We pride ourselves in giving excellent service which
Bowman is recognised as a leading supplier to original includes:-
equipment manufacturers, stockists and distributors  Competitive pricing and payment terms
across a wide range of industries and is one of the  Large stocks
leading companies in Europe specialising in the design,  Overnight delivery
supply and manufacture of plain bearings, sintered
 Just-in-time/kan ban scheduling
components and brushes for electric motors.
 Full technical and design service
In 2003 ball and needle bearings were introduced to our  Machining facility for special sizes of bearings
range. Bowman is now expanding into exporting and carbon products
throughout the world.
Other products are being added to our range as the
In 2009, the assets of Oilite Bearings Ltd and MPC Ltd market dictates.
(formerly known as Eagersinter) were acquired, which

Bowman International Limited reserve the right to change specifications without prior notice E & OE

BOWMAN INTERNATIONAL LIMITED


10 Isis Court, Wyndyke Furlong, Abingdon Business Park, Abingdon, Oxfordshire, OX14 1DZ England
1
Tel +44 (0)1235 462500 Fax +44 (0)1235 462519 E-mail [email protected] Website www.bowman.co.uk
LRQ 0960929

Company objectives
To continue to offer our customers the highest standard of
service in our Industry. It is our intention to remain
at the forefront of bearing supply and
design and to continue our development
into new bearing materials and lubricants.

We will also continue to tailor our


range of products and services in line
with our customers’ changing
aspirations and requirements.

Bowman International Limited reserve the right to change specifications without prior notice E & OE

BOWMAN INTERNATIONAL LIMITED


2 10 Isis Court, Wyndyke Furlong, Abingdon Business Park, Abingdon, Oxfordshire, OX14 1DZ England
Tel +44 (0)1235 462500 Fax +44 (0)1235 462519 E-mail [email protected] Website www.bowman.co.uk
LRQ 0960929

The industry standard


Oilite® has been acknowledged as the undisputed market leader in self-lubricating bearings for more than 80 years, and
today sets the standard for other products with its quality and reliability.
The extensive technical knowledge and manufacturing resources behind Oilite® have resulted in a vast array of
sophisticated, high quality components that are supplied to a wide range of industries, throughout the world.

Widest range in Europe Certification


As well as being the UK’s number one choice, Oilite® The company is certified to the Quality Management
bearings are also produced for other EU markets and offer Systems requirement of ISO 9001:2008 by LRQA
the widest choice of self-lubricating bearings anywhere in Certificate No. LRQ0960929 and is approved for use by:
Europe. Standard stock ranges are available in metric and • Augusta Westland
inch. To ensure that customers have the benefit of fast • Messier Dowty
delivery, a large range of European sizes are always • Hawker Beechcraft Corporation
stocked.
Certificates of conformity & Certificates of material analysis
• 1000 European standard sizes are supplied by request.
• Stock holding for fast delivery
Special Lubricants & Additives
There are now five standard stock ranges, ISO Metric, The standard stock range of Oilite® bearings is impregnated
Inch, DIN 1850, French Metric and Scandinavian Metric. with a mineral oil SAE 30 viscosity; all machined Oilite®
bearings and plates are supplied fully impregnated after
Bespoke products machining. A wide range of lubricants with varying
temperature ranges are available to meet specific
Where customer requirements are not met by stock items,
requirements. Lubricant additives are also available to
our bespoke service enables us to produce both bronze
impart anti-wear properties in marginal lubrication conditions
and iron bearings and customer specified structural parts
such as stainless steel shaft applications.
that are specifically designed to meet individual
requirements. Technical Advice
Extensive technical resources are available to resolve
Manufacturing quality and efficiency bearing problems. Engineers are always available to
Our manufacturing facilities are highly automated for discuss projects in detail, without obligation.
maximum efficiency and competitiveness. Rigorous
quality control procedures are adopted at all stages of Oilite® conforms to DIN 1850/ISO 2795
manufacture. Oilite® metric bearings are manufactured to the tolerances
set out in ISO 2795 - Plain Bearings from Sintered
Custom Machining Material. The German stock range of bearings conform to
Bowman also specialise in machining Oilite® self- DIN 1850.
lubricating bearings and plates to meet individual
specifications and tolerances. This service provides, for Material Choice
example, one-off requirements in machine maintenance or Standard Oilite® - oil retaining tin bronze is the generally
limited production runs in the OEM design field or for specified material. It gives a good balance between
prototype testing before commiting to tooling. Specialist strength, wear resistance, conformability and durability in
tools and machining techniques are employed. This operation. Ideal in a wide variety of applications where
maintains the performance characteristics and physical “self lubricating” properties are required over a long
properties which are the prerequisite of these period of time.
components. Super Oilite® – an iron copper material suited to high
static loads and slow oscillatory motion.
Iron Oilite® – 100% iron oil-retaining bearings provide an
ideal solution in high stress low revolution applications.

Bowman International Limited reserve the right to change specifications without prior notice E & OE

BOWMAN INTERNATIONAL LIMITED


10 Isis Court, Wyndyke Furlong, Abingdon Business Park, Abingdon, Oxfordshire, OX14 1DZ England
3
Tel +44 (0)1235 462500 Fax +44 (0)1235 462519 E-mail [email protected] Website www.bowman.co.uk
LRQ 0960929
Metric plain bearings to ISO 2795
Inner Diameter Outer Diameter Tolerances
Part Code Basic Min. Max. Basic Min. Max. Basic L (js13) ID OD
AS 0204* 2 2.014 2.024 4 4.015 4.027 4 E7 r7
AM 0205 2 2.002 2.012 5 5.019 5.031 2 4 3 G7 s7
AM 0305 3 3.002 3.012 5 5.019 5.031 3 4 6 G7 s7
AM 0306 3 3.002 3.012 6 6.019 6.031 3 4 6 G7 s7
AS 0308* 3 3.014 3.024 8 8.019 8.034 4 E7 r7
AM 0407 4 4.004 4.016 7 7.023 7.038 3 4 6 G7 s7
AM 0408 4 4.004 4.016 8 8.023 8.038 4 6 8 12 G7 s7
AS 0410* 4 4.020 4.032 10 10.019 10.034 8 E7 r7
AM 0508 5 5.004 5.016 8 8.023 8.038 4 5 8 10 12 16 G7 s7
AM 0509 5 5.004 5.016 9 9.023 9.038 4 5 8 G7 s7
AS 0510* 5 5.020 5.032 10 10.019 10.034 6 8 10 E7 r7
AS 0512* 5 5.020 5.032 12 12.023 12.041 10 E7 r7
AM 0609 6 6.004 6.016 9 9.023 9.038 4 6 10 12 16 G7 s7
AM 0610 6 6.004 6.016 10 10.023 10.038 4 6 10 12 16 G7 s7
AS 0612* 6 6.020 6.032 12 12.023 12.041 6 8 12 E7 r7
AS 0614* 6 6.020 6.032 14 14.023 14.041 12 E7 r7
AM 0710 7 7.005 7.020 10 10.023 10.038 5 8 10 G7 s7
AM 0711 7 7.005 7.020 11 11.028 11.046 8 10 G7 s7
AM 0811 8 8.005 8.020 11 11.028 11.046 6 8 12 G7 s7
AM 0812 8 8.005 8.020 12 12.028 12.046 6 8 12 16 20 G7 s7
AM 0814 8 8.005 8.020 14 14.028 14.046 8 12 16 20 G7 s7
AS 0818* 8 8.025 8.040 18 18.023 18.041 16 E7 r7
AM 0912 9 9.005 9.020 12 12.028 12.046 6 10 14 G7 s7
AM 0914 9 9.005 9.020 14 14.028 14.046 6 10 14 G7 s7
AM 1013 10 10.005 10.020 13 13.028 13.046 10 16 G7 s7
AM 1014 10 10.005 10.020 14 14.028 14.046 8 10 16 20 25 G7 s7
AM 1015 10 10.005 10.020 15 15.028 15.046 10 16 20 25 G7 s7
AM 1016 10 10.005 10.020 16 16.028 16.046 8 10 16 20 25 G7 s7
AS 1022* 10 10.025 10.040 22 22.028 22.046 20 E7 r7
AM 1215 12 12.006 12.024 15 15.028 15.046 12 16 20 25 G7 s7
AM 1216 12 12.006 12.024 16 16.028 16.046 8 12 16 20 25 G7 s7
AM 1218 12 12.006 12.024 18 18.028 18.046 8 12 16 20 25 G7 s7
AS 1225* 12 12.032 12.050 25 25.028 25.049 25 E7 r7
AM 1418 14 14.006 14.024 18 18.028 18.046 10 14 20 G7 s7
AM 1420 14 14.006 14.024 20 20.035 20.056 10 14 20 30 G7 s7
AS 1428* 14 14.032 14.050 28 28.028 28.049 30 E7 r7
AM 1519 15 15.006 15.024 19 19.035 19.056 10 15 20 25 30 G7 s7
AS 1520* 15 15.032 15.050 20 20.028 20.049 10 15 20 25 30 E7 r7
AM 1521 15 15.006 15.024 21 21.035 21.056 10 15 20 25 G7 s7
AM 1522 15 15.006 15.024 22 22.035 22.056 16 20 30 G7 s7
AS 1530* 15 15.032 15.050 30 30.028 30.049 30 E7 r7
AM 1620 16 16.006 16.024 20 20.035 20.056 10 12 16 20 25 30 G7 s7
AM 1622 16 16.006 16.024 22 22.035 22.056 12 16 20 25 30 G7 s7
AS 1632* 16 16.032 16.050 32 32.034 32.059 30 E7 r7
AM 1822 18 18.006 18.024 22 22.035 22.056 12 18 20 30 G7 s7
AM 1824 18 18.006 18.024 24 24.035 24.056 12 18 30 G7 s7
AM 1825 18 18.006 18.024 25 25.035 25.056 12 16 20 22 30 G7 s7
AS 1835* 18 18.032 18.050 35 35.034 35.059 30 E7 r7
AM 2024 20 20.007 20.028 24 24.035 24.056 16 20 25 32 G7 s7
AM 2025 20 20.007 20.028 25 25.035 25.056 15 20 25 30 G7 s7
AM 2026 20 20.007 20.028 26 26.035 26.056 15 20 25 30 G7 s7
AM 2028 20 20.007 20.028 28 28.035 28.056 20 25 30 40 50 G7 s7
AS 2040* 20 20.040 20.061 40 40.034 40.059 40 E7 r7
AM 2227 22 22.007 22.028 27 27.035 27.056 15 20 25 35 G7 s7
Concentricity
AM 2228 22 22.007 22.028 28 28.035 28.056 15 20 25 28 30 G7 s7
AM 2232 22 22.007 22.028 32 32.043 32.068 20 30 50 G7 s7 < 50 = IT9
AM 2530 25 25.007 25.028 30 30.035 30.056 20 25 30 50 G7 s7 > 50 = IT10

Bearings marked * are not included in ISO 2795.

For ordering see following part code examples.


4 ID x 7 OD x 4 long = AM040704 or 12 ID x 15 OD x 25 long = AM121525.

Non-standard lengths can be supplied. If the size you require is not listed please contact our sales dept. We also offer a
specialised machining service for low volume non-standard sizes and tolerances.

Bowman International Limited reserve the right to change specifications without prior notice E & OE

BOWMAN INTERNATIONAL LIMITED


4 10 Isis Court, Wyndyke Furlong, Abingdon Business Park, Abingdon, Oxfordshire, OX14 1DZ England
Tel +44 (0)1235 462500 Fax +44 (0)1235 462519 E-mail [email protected] Website www.bowman.co.uk
LRQ 0960929
Metric plain bearings to ISO 2795 – continued
Inner Diameter Outer Diameter Tolerances
Part Code Basic Min. Max. Basic Min. Max. Basic L (js13) ID OD
AM 2532 25 25.007 25.028 32 32.043 32.068 20 25 30 35 40 G7 s7 Note
ISO Metric Bearing Standard is G7 s7
AM 2535 25 25.007 25.028 35 35.043 35.068 25 35 50 G7 s7
AM 2545* 25 25.040 25.061 45 45.034 45.059 35 E7 r7
AM 2833 28 28.007 28.028 33 33.043 33.068 20 30 G7 s7
AM 2836 28 28.007 28.028 36 36.043 36.068 20 25 30 40 G7 s7
AM 3035 30 30.007 30.028 35 35.043 35.068 20 25 30 G7 s7
AM 3038 30 30.007 30.028 38 38.043 38.068 20 25 30 40 G7 s7
AM 3040 30 30.007 30.028 40 40.043 40.068 25 35 40 45 50 60 G7 s7
AM 3050* 30 30.05 30.075 50 50.034 50.059 60 E7 r7
AM 3238 32 32.009 32.034 38 38.043 38.068 20 25 30 40 G7 s7
AM 3240 32 32.009 32.034 40 40.043 40.068 20 25 30 40 50 G7 s7
AM 3541 35 35.009 35.034 41 41.043 41.068 25 35 40 G7 s7
AM 3544 35 35.009 35.034 44 44.043 44.068 22 28 35 G7 s7
AM 3545 35 35.009 35.034 45 45.043 45.068 25 35 40 50 70 G7 s7
AM 3642 36 36.009 36.034 42 42.043 42.068 22 28 36 45 G7 s7
AM 3645 36 36.009 36.034 45 45.043 45.068 22 28 36 45 G7 s7
AM 3844 38 38.009 38.034 44 44.043 44.068 25 35 45 G7 s7
AM 3848 38 38.009 38.034 48 48.043 48.068 35 45 55 G7 s7
AM 4046 40 40.009 40.034 46 46.043 46.068 30 40 50 G7 s7
AM 4050 40 40.009 40.034 50 50.043 50.068 25 30 32 35 40 50 60 80 G7 s7
AM 4248 42 42.009 42.034 48 48.043 48.068 40 50 G7 s7
AM 4252 42 42.009 42.048 52 52.053 52.099 40 50 60 G8 s8
AM 4551 45 45.009 45.048 51 51.053 51.099 35 45 55 G8 s8
AM 4555 45 45.009 45.048 55 55.053 55.099 35 45 55 65 75 80 G8 s8
AM 4556 45 45.009 45.048 56 56.053 56.099 28 36 45 56 G8 s8
AM 4565* 45 45.050 45.075 65 65.041 65.071 80 E7 r7
AM 4855 48 48.009 48.048 55 55.053 55.099 50 G8 s8
AM 4858 48 48.009 48.048 58 58.053 58.099 50 G8 s8
AM 5058 50 50.009 50.048 58 58.053 58.099 35 50 G8 s8
AM 5060 50 50.009 50.048 60 60.053 60.099 30 35 40 50 63 70 75 100 G8 s8
AM 5070* 50 50.050 50.089 70 70.043 70.089 70 E8 r8
AM 5563 55 55.010 55.056 63 63.053 63.099 40 55 G8 s8
AM 5570* 55 55.060 55.106 70 70.043 70.089 70 E8 r8
AM 5565 55 55.060 55.106 65 65.041 65.087 40 55 70 E8 r8
AM 6068 60 60.010 60.056 68 68.059 68.105 50 60 70 G8 s8
AM 6070 60 60.010 60.056 70 70.059 70.105 50 60 120 G8 s8
AM 6072 60 60.010 60.056 72 72.059 72.105 50 60 70 G8 s8
AM 6075* 60 60.060 60.106 75 75.043 75.089 60 90 E8 r8
AM 6080* 60 60.060 60.106 80 80.043 80.089 120 E8 r8
AM 6085* 60 60.060 60.106 85 85.051 85.105 90 E8 r8
AM 6370 63 63.010 63.056 70 70.059 70.105 40 50 G8 s8
AM 6575* 65 65.060 65.106 75 75.043 75.089 60 90 E8 r8
AM 6580* 65 65.060 65.106 80 75.043 75.089 60 90 E8 r8
AM 7080* 70 70.060 70.106 80 75.043 75.089 60 90 120 E8 r8
AM 7085* 70 70.060 70.106 85 85.051 85.105 60 90 E8 r8
AM 7585* 75 75.060 75.106 85 85.051 85.105 70 100 E8 r8
AM 7590* 75 75.060 75.106 90 90.051 90.105 70 100 E8 r8
AM 75100* 75 75.060 75.106 100 100.051 100.105 100 E8 r8
AM 8090* 80 80.060 80.106 90 90.051 90.105 70 100 E8 r8
AM 8095* 80 80.060 80.106 95 95.051 95.105 70 100 E8 r8
AM 80100* 80 80.060 80.106 100 100.051 100.105 120 E8 r8
AM 80105* 80 80.060 80.106 105 105.054 105.108 100 E8 r8
AM 8595* 85 85.072 85.125 95 95.051 95.105 100 E8 r8
AM 85100* 85 85.072 85.125 100 100.051 100.105 100 E8 r8
Concentricity
AM 90105* 90 90.072 90.125 105 105.054 105.089 80 E8 r8
AM 90110* 90 90.072 90.125 110 110.054 110.108 80 E8 r8 < 50 = IT9
AM 100120* 100 100.072 100.125 120 120.054 120.108 80 100 120 E8 r8 > 50 = IT10

Bearings marked * are not included in ISO 2795.

Non-standard lengths can be supplied. If the size you require is not listed please contact our sales dept. We also
offer a specialised machining service for low volume non-standard sizes and tolerances.

Bowman International Limited reserve the right to change specifications without prior notice E & OE

BOWMAN INTERNATIONAL LIMITED


10 Isis Court, Wyndyke Furlong, Abingdon Business Park, Abingdon, Oxfordshire, OX14 1DZ England 5
Tel +44 (0)1235 462500 Fax +44 (0)1235 462519 E-mail [email protected] Website www.bowman.co.uk
LRQ 0960929
Metric flanged bearings to ISO 2795
Inner Diameter Outer Diameter Basic L Tolerances
Part Code Basic Min. Max. Basic Min. Max. ØD1 e ID OD
AL 0205 2 2.002 2.012 5 5.019 5.031 8 1.5 3 G7 s7
AT 0305* 3 3.020 3.032 5 5.015 5.027 8 1.5 4 E7 r7
AL 0306 3 3.004 3.016 6 6.019 6.031 9 1.5 3 4 G7 s7
AL 0408 4 4.004 4.016 8 8.023 8.038 12 2 4 6 8 12 G7 s7
AT 0408 4 4.020 4.032 8 8.019 8.034 10 1.5 6 E7 r7
AL 0509 5 5.004 5.016 9 9.023 9.038 13 2 4 5 8 G7 s7
AT 0510* 5 5.020 5.032 10 10.019 10.034 12 2 6 E7 r7
AL 0610 6 6.004 6.016 10 10.023 10.038 14 2 4 6 8 10 16 G7 s7
AT 0612* 6 6.020 6.032 12 12.023 12.041 14 2 6 E7 r7
AL 0711 7 7.005 7.020 11 11.028 11.046 15 2 5 8 G7 s7
AL 0812 8 8.005 8.020 12 12.028 12.046 16 2 6 8 12 16 G7 s7
AT 0814* 8 8.025 8.040 14 14.023 14.041 18 3 8 E7 r7
AT 0914* 9 9.025 9.040 14 14.023 14.041 19 2.5 6 10 14 E7 r7
AL 1013 10 10.005 10.020 13 13.028 13.046 17 2.5 8 10 16 20 G7 s7
AT 1014* 10 10.025 10.040 14 14.023 14.041 18 2 12 E7 r7
AL 1015 10 10.005 10.020 15 15.028 15.046 21 3 8 10 16 20 G7 s7
AL 1016 10 10.005 10.020 16 16.028 16.046 22 3 8 10 12 16 G7 s7
AT 1016* 10 10.025 10.040 16 16.023 16.041 20 3 8 10 E7 r7
AL 1215 12 12.006 12.024 15 15.028 15.046 21 3 12 16 20 G7 s7
AL 1217 12 12.006 12.024 17 17.028 17.046 23 3 12 16 20 25 G7 s7
AL 1218 12 12.006 12.024 18 18.023 18.041 24 3 8 12 20 G7 s7
AT 1218* 12 12.032 12.050 18 18.023 18.041 22 3 10 12 E7 r7
AL 1420 14 14.006 14.024 20 20.035 20.056 26 3 10 14 20 G7 s7
AL 1519 15 15.006 15.024 19 19.035 19.056 25 3 16 20 25 G7 s7
AL 1521 15 15.006 15.024 21 21.035 21.056 27 3 10 15 20 25 G7 s7
AT 1522* 15 15.032 15.050 22 22.028 22.049 28 3 12 16 E7 r7
AL 1620 16 16.006 16.024 20 20.035 20.056 27 3 16 20 25 G7 s7
AT 1620* 16 16.032 16.050 20 20.028 20.049 24 2 12 E7 r7
AL 1622 16 16.006 16.024 22 22.035 22.056 28 3 12 16 20 25 G7 s7
AT 1622* 16 16.032 16.050 22 22.028 22.049 28 4 12 16 E7 r7
AL 1824 18 18.006 18.024 24 24.035 24.056 30 3 12 18 22 30 G7 s7
AT 1825* 18 18.032 18.050 25 25.028 25.049 32 4 12 16 E7 r7
AL 2024 20 20.007 20.028 24 24.035 24.056 30 3 16 20 25 G7 s7
AL 2026 20 20.007 20.028 26 26.035 26.056 32 3 15 20 25 30 G7 s7
AT 2028* 20 20.040 20.061 28 28.028 28.049 35 4 16 20 E7 r7
AL 2228 22 22.007 22.028 28 28.035 28.056 34 3 15 20 25 30 G7 s7
AL 2530 25 25.007 25.028 30 30.035 30.056 39 3.5 20 25 32 G7 s7
AL 2532 25 25.007 25.028 32 32.043 32.068 39 3.5 20 25 30 G7 s7
AT 2535* 25 25.040 25.061 35 35.034 35.059 45 5 16 25 E7 r7
AL 2836 28 28.007 28.028 36 36.043 36.068 44 4 20 25 30 G7 s7
AL 3038 30 30.007 30.028 38 38.043 38.068 46 4 20 25 30 G7 s7
AT 3040* 30 30.040 30.061 40 40.034 40.059 50 5 20 30 E7 r7
AL 3238 32 32.009 32.034 38 38.043 38.068 46 4 20 25 32 G7 s7
AL 3240 32 32.009 32.034 40 40.043 40.068 48 4 20 25 30 G7 s7
AL 3545 35 35.009 35.034 45 45.043 45.068 55 5 20 25 35 40 G7 s7
AL 3848 38 38.009 38.034 48 48.043 48.068 58 5 25 35 G7 s7
AL 4046 40 40.009 40.034 46 46.043 46.068 56 5 25 32 40 G7 s7
AL 4050 40 40.009 40.034 50 50.043 50.068 60 5 25 30 40 50 G7 s7
AT 4050* 40 40.050 40.075 50 50.034 50.059 60 6 25 40 E7 r7
AL 4252 42 42.009 42.048 52 52.053 52.099 62 5 40 50 G8 s8
AL 4555 45 45.009 45.048 55 55.053 55.099 65 5 35 45 55 G8 s8
AT 4555* 45 45.050 45.075 55 55.041 55.071 65 6 30 45 E7 r7
AL 5060 50 50.009 50.048 60 60.053 60.099 70 5 32 35 40 50 G8 s8
AT 5060* 50 50.050 50.075 60 60.041 60.071 70 6 30 50 E7 r7
AT 6072 60 60.060 60.106 72 72.043 72.089 84 6 50 60 E8 r8
AT 6075 60 60.060 60.106 75 75.043 75.089 85 8 60 E8 r8
AT 7085 70 70.060 70.106 85 85.051 85.105 95 8 60 E8 r8
AT 8095 80 80.060 80.106 95 95.051 95.105 105 8 70 E8 r8
AT 90110 90 90.072 90.125 110 110.054 110.108 120 8 50 E8 r8
AT 100120 100 100.072 100.125 120 120.054 120.108 130 8 80 E8 r8
Bearings marked * are not included in ISO 2795.
For ordering see following part code examples. 4 ID x 8 OD x 6 long = AL040806 or 12 ID x 15 OD x 20 long = AL121520.
Non-standard lengths can be supplied. If the size you require is not listed please contact our sales dept. We also offer a
specialised machining service for low volume non-standard sizes and tolerances.
Bowman International Limited reserve the right to change specifications without prior notice E & OE

BOWMAN INTERNATIONAL LIMITED


6 10 Isis Court, Wyndyke Furlong, Abingdon Business Park, Abingdon, Oxfordshire, OX14 1DZ England
Tel +44 (0)1235 462500 Fax +44 (0)1235 462519 E-mail [email protected] Website www.bowman.co.uk
LRQ 0960929
German metric plain bearings to DIN 1850 (G7/r6 tolerances)
Inner Diameter Ød (G7) Outer Diameter (r6) Basic L f Concentricity
Part Code Basic Min Max Basic Min Max (js 13) max D to d
AD0306 3 3.002 3.012 6 6.015 6.023 7 0.3 0.018
AD0408 4 4.004 4.016 8 8.019 8.028 10 0.3 0.022
AD0509 5 5.004 5.016 9 9.019 9.028 10 0.3 0.022
AD0610 6 6.004 6.016 10 10.019 10.028 10 0.3 0.022
AD0612 6 6.004 6.016 12 12.023 12.034 12 0.3 0.027
AD0812 8 8.005 8.020 12 12.023 12.034 8 12 15 0.3 0.027
AD1016 10 10.005 10.020 16 16.023 16.034 10 15 20 0.3 0.027
AD1218 12 12.006 12.024 18 18.023 17.046 10 15 20 0.5 0.027
AD1420 14 14.006 14.024 20 20.028 20.041 20 0.5 0.033
AD1520 15 15.006 15.024 20 20.028 20.041 15 0.5 0.033
AD1520 16 15.006 15.024 20 20.028 20.041 25 0.5 0.033
AD1622 16 16.006 16.024 22 22.028 20.041 15 25 0.5 0.033
AD1825 18 18.007 18.024 25 25.028 25.041 25 0.5 0.033
AD2026 20 20.007 20.028 26 27.028 26.041 20 30 0.5 0.033
AD2030 20 20.007 20.028 30 30.028 30.041 20 30 0.5 0.033
AD2228 22 22.007 22.028 28 28.028 28.041 20 30 0.5 0.033
AD2532 25 25.007 25.028 32 32.034 32.050 25 35 0.5 0.039
AD2836 28 28.007 28.028 36 36.034 36.050 25 35 0.5 0.039
AD3038 30 30.007 30.028 38 38.034 38.050 30 40 0.5 0.039
AD3040 30 30.007 30.028 40 40.034 40.050 30 40 0.5 0.039
AD3240 32 32.009 32.034 40 40.034 40.050 40 0.8 0.039
AD3545 35 35.009 35.034 45 45.034 45.050 35 45 0.8 0.039
AD4050 40 40.009 40.034 50 50.034 50.050 50 0.8 0.039
AD4556 45 45.009 45.034 50 56.041 56.060 35 0.8 0.046
AD5060 50 50.009 50.034 60 60.041 60.060 50 0.8 0.046
For ordering see following part code examples.
8 ID x 12 OD x 8 long = AD081208 or 14 ID x 20 OD x 20 long = AD142020.

German metric flanged bearings to DIN 1850 (G7/r6 tolerances)


Inner Diameter Ød (G7) Outer Diameter (r6) Basic L ØD I Concentricity e f r
Part Code Basic Min Max Basic Min Max (js 13) TOL D to d max max
AE040806 4 4.004 4.016 8 8.019 8.028 6 10 0.022 2 0.3 0.3
AE061010 6 6.004 6.016 10 10.019 10.028 10 12 0.022 2 0.3 0.3
AE081215 8 8.005 8.020 12 12.013 12.034 15 14 0.027 2 0.3 0.3
AE101620 10 10.005 10.020 16 16.023 16.034 20 20 0.027 2 0.3 0.6
AE121620 12 12.006 12.024 16 16.023 16.034 20 18 0.027 2 0.5 0.6
AE142025 14 14.006 14.024 20 20.028 20.041 25 23 0.033 3 0.5 0.6
AE162220 16 16.008 16.024 22 22.028 22.041 20 28 0.033 3 0.5 0.6
AE182430 18 18.006 18.024 24 24.028 24.041 30 32 0.033 3 0.5 0.6
AE202630 20 20.007 20.028 26 26.028 26.041 30 32 0.033 3 0.5 0.6
Non-standard lengths can be supplied. If the size you require is not listed please contact our sales dept. We also
offer a specialised machining service for low volume non-standard sizes and tolerances.

Bowman International Limited reserve the right to change specifications without prior notice E & OE

BOWMAN INTERNATIONAL LIMITED


10 Isis Court, Wyndyke Furlong, Abingdon Business Park, Abingdon, Oxfordshire, OX14 1DZ England 7
Tel +44 (0)1235 462500 Fax +44 (0)1235 462519 E-mail [email protected] Website www.bowman.co.uk
LRQ 0960929
French metric plain bearings (F7 / s7 – F8/s8 tolerances)
Inner Diameter Ød (F7/F8) Outer Diameter ØD (s7/s8) Basic L F Concentricity
Part Code Basic Min Max Basic Min Max (js13) max D to d
AF0205 2 2.007 2.016 5 5.019 5.031 2 3 0.3 0.050
AF0306 3 3.007 3.016 6 6.019 6.031 4 6 10 0.3 0.050
AF0407 4 4.010 4.022 7 7.023 7.038 4 8 12 0.3 0.050
AF0408 4 4.010 4.022 8 8.023 8.038 4 8 12 0.3 0.050
AF0508 5 5.010 5.022 8 8.023 8.038 5 8 10 12 16 0.3 0.050
AF0509 5 5.010 5.022 9 9.023 9.038 4 5 8 0.3 0.050
AF0609 6 6.010 6.022 9 9.023 10.038 6 10 12 16 0.3 0.050
AF0610 6 6.010 6.022 10 10.023 10.038 6 10 12 16 0.3 0.050
AF0612 6 6.010 6.022 12 12.038 12.046 6 10 12 16 0.3 0.050
AF0710 7 7.013 7.028 10 10.023 10.038 5 8 10 0.3 0.050
AF0811 8 8.013 8.028 11 11.028 11.046 8 12 16 20 0.3 0.050
AF0812 8 8.013 8.028 12 12.038 12.046 8 12 16 20 0.3 0.050
AF0814 8 8.013 8.028 14 14.028 14.046 8 12 16 20 0.3 0.050
AF0912 9 9.013 9.028 12 12.028 12.046 6 10 14 0.3 0.050
AF1013 10 10.013 10.028 13 13.028 13.046 10 16 20 25 0.3 0.050
AF1014 10 10.013 10.028 14 14.028 14.046 10 16 20 25 0.3 0.050
AF1015 10 10.013 10.028 15 15.028 15.046 10 16 20 25 0.3 0.050
AF1016 10 10.013 10.028 16 16.028 16.046 10 16 20 25 0.4 0.050
AF1215 12 12.016 12.034 15 15.028 15.046 12 16 20 25 0.4 0.050
AF1216 12 12.016 12.034 16 16.028 16.046 12 16 20 25 0.4 0.050
AF1217 12 12.016 12.034 17 17.028 17.046 12 16 20 25 0.4 0.050
AF1218 12 12.016 12.034 18 18.028 18.046 12 16 20 25 0.4 0.050
AF1418 14 14.016 14.034 18 18.028 18.046 14 18 22 28 0.4 0.050
AF1420 14 14.016 14.034 20 20.035 20.056 14 18 22 28 0.4 0.050
AF1519 15 15.016 15.034 19 19.035 19.056 16 20 25 32 0.4 0.050
AF1521 15 15.016 15.034 21 21.035 21.056 16 20 25 32 0.4 0.050
AF1620 16 16.016 16.034 20 20.035 20.056 16 20 25 32 0.4 0.050
AF1622 16 16.016 16.034 22 22.035 22.056 16 20 25 32 0.4 0.050
AF1822 18 18.016 18.034 22 22.035 22.056 18 22 28 36 0.4 0.050
AF1824 18 18.016 18.034 24 24.035 24.056 18 22 28 36 0.4 0.050
AF1825 18 18.016 18.034 25 25.035 25.056 18 22 28 36 0.4 0.050
AF2024 20 20.020 20.041 24 24.035 24.056 16 20 25 30 32 0.4 0.050
AF2025 20 20.020 20.041 25 25.035 25.056 16 20 25 32 0.4 0.050
AF2026 20 20.020 20.041 26 26.035 26.056 16 20 25 32 0.4 0.050
AF2027 20 20.020 20.041 27 27.035 27.056 16 20 25 32 0.4 0.050
AF2028 20 20.020 20.041 28 28.035 28.056 16 20 25 32 0.4 0.050
AF2227 22 22.020 22.041 27 27.035 27.056 18 22 28 36 0.4 0.050
AF2228 22 22.020 22.041 28 28.035 28.056 18 22 28 36 0.4 0.050
AF2229 22 22.020 22.041 29 29.043 29.068 18 22 28 36 0.4 0.050
AF2530 25 25.020 25.041 30 30.035 30.056 20 25 32 40 0.4 0.050
AF2532 25 25.020 25.041 32 32.043 32.068 20 25 32 40 0.4 0.050
AF2832 28 28.020 28.041 32 32.043 32.068 22 28 36 45 0.4 0.070
AF2833 28 28.020 28.041 33 33.043 33.068 22 28 36 45 0.4 0.070
AF2836 28 28.020 28.041 36 36.043 36.060 22 28 36 45 0.4 0.070
AF3038 30 30.020 30.041 38 38.043 38.068 24 30 38 0.4 0.070
AF3238 32 32.025 32.050 38 38.043 38.068 20 25 32 40 50 0.4 0.070
AF3240 32 32.025 32.050 40 40.043 40.068 20 25 32 40 50 0.4 0.070
AF3544 35 35.025 35.050 44 44.043 44.068 22 28 35 0.4 0.070
AF3545 35 35.025 35.050 45 45.043 45.068 25 35 40 50 0.4 0.070 Non-standard lengths can be
AF3642 36 36.025 36.050 42 42.043 42.068 22 28 36 45 0.4 0.070 supplied. If the size you require is
AF3645 36 35.025 36.050 45 45.043 45.068 22 28 36 45 0.4 0.070 not listed please contact our sales
AF3844 38 38.025 38.050 44 44.043 44.068 25 35 45 0.4 0.070 dept. We also offer a specialised
machining service for low volume
AF4046 40 40.025 40.050 46 46.043 46.068 25 32 40 50 0.4 0.070
non-standard sizes and tolerances.
AF4050 40 40.025 40.050 50 50.043 50.068 25 32 40 50 0.4 0.070
For ordering see following
AF4551 45 45.025 45.050 51 51.053 51.083 28 36 45 56 0.4 0.070
part code examples.
AF4555 45 45.025 45.050 55 55.053 55.083 35 45 55 65 0.4 0.070 4 ID x 7 OD x 4 long = AF040704 or
AF4556 45 45.025 45.050 56 56.053 56.083 28 36 45 56 0.4 0.070 12 ID x 15 OD x 25 long = AF121525.
AF5056 50 50.025 50.050 56 56.053 56.083 32 40 50 63 0.4 0.070
AF5060 50 50.025 50.050 60 56.053 56.083 32 40 50 63 0.4 0.070 Tolerances
AF5565 55 55.030 55.076 65 65.053 65.083 40 55 70 0.7 0.070
Ø Interior < 50mm tolerance -F7
AF6070 60 60.030 60.076 70 70.059 70.105 50 60 0.7 0.070
AF6072 60 60.030 60.076 72 72.059 72.105 50 60 70 0.7 0.070 > 50mm tolerance -F8
AF6080 60 60.030 60.076 80 80.059 80.105 90 0.7 0.070 Ø Exterior < 50mm tolerance -s7
AF6370 63 63.030 63.076 70 70.059 70.105 40 50 0.7 0.070 > 50mm tolerance -s8

Bowman International Limited reserve the right to change specifications without prior notice E & OE

BOWMAN INTERNATIONAL LIMITED


8 10 Isis Court, Wyndyke Furlong, Abingdon Business Park, Abingdon, Oxfordshire, OX14 1DZ England
Tel +44 (0)1235 462500 Fax +44 (0)1235 462519 E-mail [email protected] Website www.bowman.co.uk
LRQ 0960929
French metric flanged bearings (F8 / s8 tolerances)
Inner Diameter Ød (F8) Outer Diameter ØD (s8) Basic L Ø Dl e f r Concentricity
Part Code Basic Min Max Basic Min Max (js13) max max D to d
AG0306 3 3.006 3.020 6 6.019 6.037 4 6 10 9 1.5 0.3 0.3 0.060
AG0408 4 4.010 4.028 8 8.023 8.045 4 6 12 8 12 2 0.3 0.3 0.060
AG0610 6 6.010 6.028 10 10.023 10.045 6 10 16 14 2 0.4 0.3 0.060
AG0812 8 8.013 8.035 12 12.038 12.055 8 12 16 16 2 0.4 0.3 0.060
AG0914 9 9.013 9.035 14 14.028 14.055 6 10 14 19 2.5 0.4 0.3 0.060
AG1013 10 10.013 10.035 13 13.028 13.055 10 16 20 16 1.5 0.4 0.3 0.060
AG1015 10 10.013 10.035 15 15.028 15.055 10 16 20 20 2.5 0.4 0.6 0.060
AG1016 10 10.013 10.035 16 16.028 16.055 8 10 16 22 3 0.4 0.6 0.060
AG1215 12 12.016 12.043 15 15.028 15.055 12 16 20 18 1.5 0.4 0.6 0.060
AG1217 12 12.016 12.043 17 17.028 17.055 12 16 20 25 22 2.5 0.4 0.6 0.060
AG1218 12 12.016 12.043 18 18.028 18.055 8 12 20 24 3 0.4 0.6 0.060
AG1418 14 14.016 14.043 18 18.028 18.055 14 18 22 22 2 0.4 0.6 0.060
AG1420 14 14.016 14.043 20 20.035 20.068 14 18 22 28 26 3 0.4 0.6 0.060
AG1519 15 15.016 15.043 19 19.035 19.068 16 20 25 23 2 0.4 0.6 0.060
AG1521 15 15.016 15.043 21 21.035 21.068 16 20 25 32 27 3 0.4 0.6 0.060
AG1620 16 16.016 16.043 20 20.035 20.068 16 20 25 24 2 0.4 0.6 0.060
AG1622 16 16.016 16.043 22 22.035 22.068 16 20 25 32 28 3 0.4 0.6 0.060
AG1822 18 18.016 18.043 22 22.035 22.068 18 22 28 26 2 0.4 0.6 0.060
AG1824 18 18.016 18.043 24 24.035 24.068 18 22 28 30 3 0.4 0.6 0.060
AG2024 20 20.020 20.053 24 24.035 24.068 16 20 25 28 2 0.4 0.6 0.060
AG2026 20 20.020 20.053 26 26.035 26.068 16 20 25 32 32 3 0.4 0.6 0.060
AG2227 22 22.020 22.053 27 27.035 27.068 18 22 28 32 2.5 0.4 0.6 0.060
AG2228 22 22.020 22.053 28 28.035 28.068 15 20 25 30 34 3 0.4 0.6 0.060
AG2229 22 22.020 22.053 29 29.035 29.068 18 22 28 36 36 3.5 0.4 0.6 0.060
AG2530 25 25.020 25.053 30 30.035 30.068 20 25 32 35 2.5 0.4 0.6 0.060
AG2532 25 25.020 25.053 32 30.043 32.082 20 25 32 39 3.5 0.4 0.6 0.060
AG2833 28 28.020 28.053 33 33.043 33.082 22 28 36 38 2.5 0.4 0.6 0.080
AG2836 28 28.020 28.053 36 36.043 36.082 22 28 36 44 4 0.4 0.6 0.080
AG3038 30 30.020 30.053 38 38.043 38.082 20 25 30 46 4 0.6 0.8 0.080
AG3238 32 32.025 32.064 38 38.043 38.082 20 25 32 44 3 0.6 0.8 0.080
AG3240 32 32.025 32.064 40 40.043 40.082 20 25 30 32 48 4 0.6 0.8 0.080
AG3642 36 36.025 36.064 42 42.043 42.082 22 28 36 48 3 0.6 0.8 0.080
AG3645 36 36.025 36.064 45 45.043 45.082 22 28 36 54 4.5 0.6 0.8 0.080
AG4046 40 40.025 40.064 46 46.043 46.082 25 32 40 52 3 0.6 0.8 0.080
AG4050 40 40.025 40.084 50 50.043 50.082 25 32 40 60 5 0.7 0.8 0.080
AG4551 45 45.025 45.064 51 51.023 51.099 28 36 45 57 3 0.7 0.8 0.080
AG4556 45 45.025 45.064 56 56.053 56.099 28 36 45 67 5.5 0.7 0.8 0.080
AG5056 50 50.025 50.064 56 56.053 56.099 32 40 50 62 3 0.7 0.8 0.080
AG5060 50 50.025 50.064 60 60.053 60.099 32 40 50 70 5 0.7 0.8 0.080

For ordering see following part code examples.


4 ID x 8 OD x 6 long = AG040806 or 12 ID x 15 OD x 20 long = AG121520.
Non-standard lengths can be supplied. If the size you require is not listed please contact our sales dept. We also
offer a specialised machining service for low volume non-standard sizes and tolerances.

Bowman International Limited reserve the right to change specifications without prior notice E & OE

BOWMAN INTERNATIONAL LIMITED


10 Isis Court, Wyndyke Furlong, Abingdon Business Park, Abingdon, Oxfordshire, OX14 1DZ England 9
Tel +44 (0)1235 462500 Fax +44 (0)1235 462519 E-mail [email protected] Website www.bowman.co.uk
LRQ 0960929
Inch plain bearings
Inner Diameter Ød Outer Diameter ØD Basic L
BasicDiameter
Part Code Inner Min.Ød (G7)
Max. Outer
BasicDiameter
Min.ØD (s7)
Max.
AI 0203 1
⁄8 0.1255 0.1265 3
⁄16 0.1885 0.1895 1
⁄8
AI 0204 1
⁄8 0.1270 0.1280 1
⁄4 0.2520 0.2530 1
⁄4
AI 0304 3
⁄16 0.1865 0.1875 1
⁄4 0.2510 0.2520 1
⁄4 5
⁄16
3
⁄8 5
⁄8
AI 0305 3
⁄16 0.1883 0.1888 5
⁄16 0.3137 0.3142 3
⁄16 1
⁄4
5
⁄16 3
⁄8 1
⁄2 5
⁄8 3
⁄4
AI 0306 3
⁄16 0.1885 0.1875 3
⁄8 0.3770 0.3780 3
⁄4
AI 0405 1
⁄4 0.2495 0.2505 5
⁄16 0.3135 0.3145 1
⁄2
AI 0406 1
⁄4 0.2508 0.2513 3
⁄8 0.3767 0.3772 3
⁄16 1
⁄4 5
⁄16
3
⁄8 ⁄
7
16
1
⁄2 5
⁄8 ⁄4
3
1
AI 0407 1
⁄4 0.2501 0.2506 7
⁄16 0.4385 0.4390 1
⁄4 5
⁄16 3
⁄8 ⁄16
7 1
⁄2
5
⁄8 3
⁄4
AI 0408 1
⁄4 0.2507 0.2512 1
⁄2 0.5020 0.5025 3
⁄8 1
⁄2 5
⁄8
3
⁄4 1
AI 0506 5
⁄16 0.3125 0.3135 3
⁄8 0.3760 0.3770 1
⁄2 5
⁄8
AI 0507 5
⁄16 0.3132 0.3137 7
⁄16 0.4390 0.4395 1
⁄4 5
⁄16 3
⁄8 1
⁄2 ⁄
9
16
5
⁄8 ⁄4
3
1 1 1⁄4 1 3⁄8
AI 0508 5
⁄16 0.3132 0.3137 1
⁄2 0.5017 0.5022 1
⁄4 5
⁄16 3
⁄8 1
⁄2 5
⁄8
3
⁄4 1
AI 0607 3
⁄8 0.3755 0.3765 7
⁄16 0.4390 0.4400 5
⁄16 1
⁄2 3
⁄4
AI 0608 3
⁄8 0.3757 0.3762 1
⁄2 0.5020 0.5025 5
⁄16 3
⁄8 7
⁄16 1
⁄2 5
⁄8 3
⁄4 7
⁄8 1 1 1⁄8 1 1⁄4
AI 0609 3
⁄8 0.3755 0.3765 9
⁄16 0.5645 0.5655 3
⁄8 1
AI 0610 3
⁄8 0.3754 0.3759 5
⁄8 0.6260 0.6270 3
⁄8 1
⁄2 5
⁄8 3
⁄4 7
⁄8 1 1 3⁄8
AI 0612 3
⁄8 0.3760 0.3770 3
⁄4 0.7520 0.7530 1
⁄2 1
AI 0709 7
⁄16 0.4382 0.4387 9
⁄16 0.5637 0.5647 3
⁄8 1
⁄2 5
⁄8 3
⁄4 13
⁄16 1
AI 0710 7
⁄16 0.4380 0.4390 5
⁄8 0.6260 0.6270 5
⁄8 1
AI 0711 7
⁄16 0.4383 0.4388 11
⁄16 0.6890 0.6900 3
⁄8 1
⁄2 3
⁄4 1 1 ⁄4 1

AI 0810 1
⁄2 0.5008 0.5013 5
⁄8 0.6265 0.6275 1
⁄4 3
⁄8 1
⁄2 5
⁄8 3
⁄4 7
⁄8 1 1 1⁄4 1 3⁄8 1 1⁄2
AI 0811 1
⁄2 0.5015 0.5020 11
⁄16 0.6895 0.6905 3
⁄8 1
⁄2 5
⁄8 3
⁄4 7
⁄8 1 1 1⁄4
AI 0812 1
⁄2 0.5015 0.5020 3
⁄4 0.7525 0.7535 1
⁄2 9
⁄16 5
⁄8 3
⁄4 7
⁄8 1 1 1⁄8 1 1⁄4 1 1⁄2 2
AI 0814 1
⁄2 0.5020 0.5030 7
⁄8 0.8780 0.8790 1
⁄2 1 1⁄2
AI 0816 1
⁄2 0.5010 0.5020 1 1.0030 1.0040 1 WHEN CHECKING YOUR ORDER
AI 0911 9
⁄16 0.5628 0.5638 11
⁄16 0.6890 0.6900 1
⁄2 5
⁄8 3
⁄4 1 1 1⁄4 ACKNOWLEDGEMENT
AI 0912 9
⁄16 0.5640 0.5650 3
⁄4 0.7520 0.7530 1 Please use the following table for conversion from
AI 0913 9
⁄16 0.5620 0.5630 13
⁄16 0.8140 0.8150 3
⁄4 1 the fraction (length) to the two digit suffix of the
AI 1012 5
⁄8 0.6255 0.6265 3
⁄4 0.7515 0.7525 1
⁄2 9
⁄16 ⁄8
5 3
⁄4 ⁄8 1 1 ⁄8 1 ⁄4 1 ⁄2
7 1 1 1
part code. Example: AI030504 (1⁄4 length)
AI 1013 5
⁄8 0.6265 0.6275 13
⁄16 0.8145 0.8155 1
⁄2 3
⁄4 1 1 1⁄4 1 3⁄8
AI 1014 5
⁄8 0.6255 0.6265 7
⁄8 0.8770 0.8780 1
⁄2 5
⁄8 ⁄4
3 7
⁄8 1 1 1⁄8 1 1⁄4 1 1⁄2 03 = 3⁄16 04 = 1⁄4 05 = 5⁄16
AI 1016 5
⁄8 0.6270 0.6280 1 1.0025 1.0035 1
06 = 3⁄8 08 = 1⁄2 09 = 9⁄16
AI 1113 11
⁄16 0.6875 0.6885 13
⁄16 0.8140 0.8150 1
AI 1115 11
⁄16 0.6881 0.6891 15
⁄16 0.9393 0.9403 7
⁄8 1 1 1⁄4 10 = 5⁄8 12 = 3⁄4 14 = 7⁄8
AI 1214 3
⁄4 0.7505 0.7515 7
⁄8 0.8765 0.8775 1
⁄2 ⁄8
5 3
⁄4 7
⁄8 1 1 1⁄8 1 1⁄4 1 1⁄2 16 = 1 18 = 1 1⁄8 20 = 1 1⁄4
AI 1215 3
⁄4 0.7535 0.7545 15
⁄16 0.9405 0.9415 3
⁄4 1 22 = 1 3⁄8 24 = 1 1⁄2 26 = 1 5⁄8
AI 1216 3
⁄4 0.7508 0.7518 1 1.0020 1.0030 1
⁄2 ⁄8 3⁄4 7⁄8 1
5
1 1⁄8 1 1⁄4 1 3⁄8 1 1⁄2 1 3⁄4 2 2 1⁄8 2 1⁄4 28 = 1 3⁄4 30 = 1 7⁄8 32 = 2
UI 1216 3
⁄4 0.7522 0.7532 1 1.0025 1.0035 1 1⁄2 1 3⁄4 2 36 = 2 1⁄4 40 = 2 1⁄2 48 = 3
AI 1218 3
⁄4 0.7525 0.7535 1 1⁄8 1.1280 1.1290 3
⁄4 1 1 1⁄4
AI 1220 3
⁄4 0.7525 0.7535 1 1⁄4 1.2535 1.2545 1 1⁄8 1 3⁄8 1 1⁄2 2
AI 1416 7
⁄8 0.8755 0.8765 1 1.0017 1.0027 3
⁄4 7
⁄8 1 1 1⁄8 1 1⁄4 1 1⁄2
AI 1418 7
⁄8 0.8757 0.8767 1 ⁄81
1.1270 1.1280 3
⁄4 7
⁄8 1 1 1⁄8 1 1⁄4 1 3⁄8 1 1⁄2
AI 1618 1 1.0008 1.0018 1 1⁄8 1.1270 1.1280 1
⁄2 3
⁄4 1 1 1⁄8 1 1⁄4 1 1⁄2
AI 1619 1 1.0010 1.0020 1 3⁄16 1.1885 1.1895 3
⁄4 1 1⁄2
AI 1620 1 1.0010 1.0020 1 1⁄4 1.2526 1.2536 3
⁄4 7
⁄8 1 1 1⁄8 1 1⁄4 1 3⁄8 1 1⁄2 1 5⁄8 1 3⁄4 2
AI 1622 1 1.0020 1.0030 1 3⁄8 1.3780 1.3790 1
AI 1624 1 1.0025 1.0035 1 1⁄2 1.5040 1.5050 1 1 3⁄8 1 1⁄2 1 3⁄4 2
AI 1820 1 ⁄81
1.1235 1.1245 1 ⁄41
1.2525 1.2535 1 1 1⁄4
AI 1822 1 1⁄8 1.1258 1.1268 1 3⁄8 1.3770 1.3780 3
⁄4 7
⁄8 1 1 1⁄4 1 1⁄2 1 3⁄4 2 2 1⁄2
AI 2024 1 1⁄4 1.2515 1.2525 1 1⁄2 1.5030 1.5040 7
⁄8 1 1 1⁄4 1 3⁄8 1 1⁄2 1 3⁄4 1 7⁄8 2 2 1⁄2
AI 2026 1 1⁄4 1.2525 1.2535 1 5⁄8 1.6287 1.6302 1 1 1⁄4 1 1⁄2 1 3⁄4 2 2 1⁄2
AI 2226 1 3⁄8 1.3762 1.3772 1 5⁄8 1.6275 1.6290 1 1 1⁄4 1 1⁄2 1 3⁄4 2
AI 2228 1 ⁄83
1.3775 1.3785 1 ⁄43
1.7545 1.7560 1 1⁄2 2 2 1⁄2
AI 2428 1 ⁄21
1.5013 1.5023 1 ⁄43
1.7527 1.7542 1 1 1⁄4 1 1⁄2 1 3⁄4 2 2 1⁄4 2 1⁄2 3
AI 2430 1 1⁄2 1.5025 1.5035 1 7⁄8 1.8790 1.8805 1 1 1⁄4 1 1⁄2 1 3⁄4 2 2 1⁄4 2 1⁄2
AI 2432 1 1⁄2 1.5025 1.5035 2 2.0030 2.0045 1 1⁄2 2 2 1⁄2 3 3 1⁄2
AI 2633 1 5⁄8 1.6285 1.6300 2 1⁄16 2.0675 2.0690 1 7⁄8 2 2 1⁄2
AI 2832 1 ⁄43
1.7510 1.7525 2 2.0030 2.0045 1 1⁄4 1 1⁄2 1 3⁄4 2 2 1⁄4 2 1⁄2
AI 2836 1 3⁄4 1.7510 1.7525 2 1⁄4 2.2530 2.2550 1 1⁄2 1 3⁄4 2 2 1⁄4 2 1⁄2 Some of the imperial sizes listed
AI 3236 2 2.0010 2.0025 2 1⁄4 2.2530 2.2550 1
⁄2 1 1 1⁄2 1 3⁄4 2 2 1⁄2 above can be supplied with different
AI 3238 2 2.0015 2.0030 2 3⁄8 2.3775 2.3790 11⁄2 2 1⁄2 3 tolerance ranges. Before finalising
AI 3240 2 2.0010 2.0025 2 1⁄2 2.5035 2.5055 1 1⁄2 1 3⁄4 2 2 1⁄4 2 1⁄2 3 designs or when ordering imperial
AI 3642 2 1⁄4 2.2530 2.2550 2 5⁄8 2.6285 2.6305 2 1⁄2 3 bearings for repairs, please check
AI 3644 2 ⁄41
2.2510 2.2530 2 ⁄43
2.7540 2.7560 1 ⁄2 1
2 2 1⁄4 2 ⁄2 1
3 with our sales department, the
AI 4046 2 ⁄21
2.5030 2.5050 2 ⁄87
2.8795 2.8815 2 1⁄2 3 tolerance bands available, either
AI 4048 2 1⁄2 2.5015 2.5035 3 3.0045 3.0065 1 1⁄2 2 2 1⁄2 3 from stock or for special orders.
AI 4856* 3 2.9880 3.0000 3 1⁄2 3.5020 3.5040 2 1⁄2 3
AI 5664 3 1⁄2 3.5015 3.5035 4 4.0015 4.0040 3
AI 6472 4 4.001 4.0035 4 1/2 4.5015 4.5040 4
* Non standard chamfer (details on request).
Non-standard lengths can be supplied. If the size you require is not listed please contact our sales dept. We also
offer a specialised machining service for low volume non-standard sizes and tolerances.
Bowman International Limited reserve the right to change specifications without prior notice E & OE

BOWMAN INTERNATIONAL LIMITED


10 10 Isis Court, Wyndyke Furlong, Abingdon Business Park, Abingdon, Oxfordshire, OX14 1DZ England
Tel +44 (0)1235 462500 Fax +44 (0)1235 462519 E-mail [email protected] Website www.bowman.co.uk
LRQ 0960929
Inch flanged bearings
Inner Diameter Ød Outer Diameter ØD Basic L
Part Code Basic Min. Max. Basic Min. Max. ØD1 e
AJ 0305 3
⁄16 0.1880 0.1885 5
⁄16 0.3137 0.3142 0.3750 0.062 ⁄16
3 1
⁄4 3
⁄8 1
⁄2
AJ 0406 1
⁄4 0.2505 0.2510 3
⁄8 0.3767 0.3772 0.5000 0.062 ⁄16
3 1
⁄4 3
⁄8 1
⁄2 3
⁄4
UJ0406 1
⁄4 0.2510 0.2520 3
⁄8 0.3765 0.3775 0.4688 0.062 3
⁄8
AJ 0508 5
⁄16 0.3130 0.3135 1
⁄2 0.5020 0.5025 0.6250 0.062 1
⁄4 3
⁄8 1
⁄2 3
⁄4
AJ 0509 5
⁄16 0.3120 0.3125 9
⁄16 0.5640 0.5650 0.6562 0.125 3
⁄8 3
⁄4
AJ 0608 3
⁄8 0.3755 0.3760 1
⁄2 0.5015 0.5020 0.6250 0.062 1
⁄4 ⁄16
5
⁄2
1
⁄4
3
⁄8
3 7
⁄8
UJ 0608 3
⁄8 0.3755 0.3760 1
⁄2 0.5020 0.5025 0.6250 0.140 1
⁄2 3
⁄4 7
⁄8
AJ 0609 3
⁄8 0.3747 0.3752 9
⁄16 0.5640 0.5650 0.7500 0.062 1
⁄2
UJ0609 3
⁄8 0.3750 0.3760 9
⁄16 0.5630 0.5640 0.7400 0.062 1
⁄2
AJ 0610 3
⁄8 0.3757 0.3762 5
⁄8 0.6265 0.6275 0.7500 0.125 3
⁄8 1
⁄2 ⁄8
5 3
⁄4
AJ 0709 7
⁄16 0.4401 0.4406 9
⁄16 0.5641 0.5651 0.7500 0.062 1
⁄2 3
⁄4 1
AJ 0810 1
⁄2 0.5000 0.5005 5
⁄8 0.6265 0.6275 0.7500 0.098 1
⁄2 5
⁄8 1
AJ 0812 1
⁄2 0.5008 0.5013 3
⁄4 0.7517 0.7527 1.0000 0.125 1
⁄2 3
⁄4 1 1 1⁄8
AJ 1012 5
⁄8 0.6275 0.6285 3
⁄4 0.7525 0.7535 1.1250 0.094 1
⁄2 1 1 1⁄8
AJ 1014 5
⁄8 0.6255 0.6265 7
⁄8 0.8770 0.8780 1.2500 0.125 1
⁄2 3
⁄4 1 1 1⁄8 1 1⁄4
AJ 1216 3
⁄4 0.7508 0.7518 1 1.0020 1.0030 1.3750 0.125 3
⁄4 1 1 1⁄4 1 1⁄2
UJ1216 3
⁄4 0.7495 0.7505 1 1.0010 1.0020 1.4375 0.125 1
⁄2
AJ 1416 7
⁄8 0.8755 0.8765 1 1.0017 1.0027 1.2500 0.125 1
AJ 1418 7
⁄8 0.8757 0.8767 1 1⁄8 1.1270 1.1280 1.6250 0.125 3
⁄4 1 1 1⁄4 1 1⁄2
AJ 1620 1 1.0010 1.0020 1 1⁄4 1.2526 1.2536 1.7500 0.125 1 1 1⁄4 1 1⁄2 1 3⁄4 2
UJ 1620 1 1.0010 1.0020 1 1⁄4 1.2520 1.2530 1.5000 0.125 3
⁄4 1 1 1⁄8 1 1⁄2
AJ 1822 1 1⁄8 1.1260 1.1270 1 3⁄8 1.3776 1.3786 1.8750 0.125 1 1 1⁄4 1 1⁄2 1 3⁄4
AJ 2024 1 1⁄4 1.2510 1.2520 1 1⁄2 1.5030 1.5040 1.8750 0.125 3
⁄4 1 1 1⁄4 1 1⁄2 WHEN CHECKING YOUR ORDER
AJ 2026 1 1⁄4 1.2516 1.2526 1 5⁄8 1.6280 1.6295 2.0000 0.125 1 1 1⁄4 1 1⁄2 1 3⁄4
AJ 2226 1 3⁄8 1.3745 1.3755 1 5⁄8 1.6270 1.6285 1.8750 0.125 3
⁄4 1 1⁄4 2 ACKNOWLEDGEMENT
AJ 2428 1 1⁄2 1.5016 1.5026 1 3⁄4 1.7510 1.7525 1.8700 0.120 1 1⁄2 1 7⁄8 Please use the following table for conversion from
UJ2428 1 1⁄2 1.5020 1.5030 1 3⁄4 1.7505 1.7520 2.0000 0.094 1
⁄2 the fraction (length) to the two digit suffix of the
AJ 2430 1 1⁄2 1.5016 1.5026 1 7⁄8 1.8780 1.8795 2.5000 0.188 1 1 1⁄4 1 1⁄2 1 3⁄4 2 part code. Example: AI030504 (1⁄4 length)
AJ3236 2 2.0015 2.0030 2 ⁄41
2.2535 2.2540 2.5000 0.125 3
⁄4 1 1 1⁄4
AJ3240 2 2.0005 2.0020 2 1⁄2 2.4995 2.5010 3.0000 0.375 2 3⁄8 03 = 3⁄16 04 = 1⁄4 05 = 5⁄16
AJ4452 2 3⁄4 2.7500 2.7520 3 1⁄4 3.2480 3.2500 4.0000 0.188 1 1⁄2 06 = 3⁄8 08 = 1⁄2 09 = 9⁄16
AJ4856 3 3.0000 3.0020 3 ⁄21
3.5000 3.5020 4.0000 0.375 2 3⁄8 10 = 5⁄8 12 = 3⁄4 14 = 7⁄8
Non-standard lengths can be supplied. If the size you require is not listed please contact our sales dept. We also 16 = 1 18 = 1 1⁄8 20 = 1 1⁄4
offer a specialised machining service for low volume non-standard sizes and tolerances. 22 = 1 3⁄8 24 = 1 1⁄2 26 = 1 5⁄8
28 = 1 3⁄4 30 = 1 7⁄8 32 = 2
For additional tolerances on inch bearings see page 25. 36 = 2 1⁄4 40 = 2 1⁄2 48 = 3

Inch thrust washers


Inner Diameter Ød Outer Diameter ØD Length e
Part Code Basic Min. Max. Basic Min. Max. Basic Min. Max.
AW 061002 3
⁄8 0.3750 0.3800 5
⁄8 0.6230 0.6280 1
⁄8 0.122 0.1280
AW 081402 1
⁄2 0.5050 0.5100 7
⁄8 0.8750 0.8800 1
⁄8 0.122 0.1280
AW 091801 17
⁄32 0.5312 0.5412 1 1⁄8 1.1200 1.1250 1
⁄16 0.059 0.0655
AW 112002 21
⁄32 0.6562 0.6662 1 1⁄4 1.2450 1.2500 3
⁄32 0.090 0.0968
AW 132402 25
⁄32 0.7812 0.7912 1 ⁄2
1
1.4950 1.5000 1
⁄8 0.122 0.1280
AW 142402 7
⁄8 0.8750 0.8800 1 1⁄2 1.4950 1.5000 1
⁄8 0.122 0.1280
AW 143002 7
⁄8 0.8780 0.8830 1 55⁄64 1.8660 1.8710 1
⁄8 0.122 0.1280
AW 162802 1 1.0100 1.0150 1 25⁄32 1.7710 1.7810 1
⁄8 0.122 0.1280
AW 163202 1 1⁄32 1.0320 1.0420 2 1.9950 2.0000 1
⁄8 0.120 0.1300
AW 203002 1 1⁄4 1.2490 1.2540 1 7⁄8 1.8750 1.8800 1
⁄8 0.120 0.1300
AW 204802 1 1⁄4 1.2490 1.2540 3 2.9980 3.0030 1
⁄8 0.120 0.1300
AW 204804 1 1⁄4 1.2490 1.2540 3 2.9980 3.0030 1
⁄4 0.245 0.2550
AW 234002 1 13⁄32 1.4062 1.4162 2 1⁄2 2.4950 2.5000 5
⁄32 0.151 0.1613
AW 263802 1 5⁄8 1.6240 1.6260 2 3⁄8 2.3740 2.3790 1
⁄8 0.120 0.1300
AW 365602 2 1⁄4 2.2480 2.2520 3 1⁄2 3.4980 3.5030 1
⁄8 0.120 0.1300
Non-standard lengths can be supplied. If the size you require is not listed please contact our sales dept. We also
offer a specialised machining service for low volume non-standard sizes and tolerances.
Applications:
Provides self-lubricating thrust surfaces especially in applications where assembly does not lend itself to the use of a flanged
bearing. Alternatively can provide a second thrust surface at the non-flanged end of a bearing.
In thrust applications PV should not exceed 0.36 N/mm2 x m/s. Surface velocity (m/s) calculated on mean diameter of thrust
face and pressure (N/mm2) on total thrust area.
We also offer specialised machining service for special sizes of bearings according to customers specific requirements.

Bowman International Limited reserve the right to change specifications without prior notice E & OE

BOWMAN INTERNATIONAL LIMITED


10 Isis Court, Wyndyke Furlong, Abingdon Business Park, Abingdon, Oxfordshire, OX14 1DZ England 11
Tel +44 (0)1235 462500 Fax +44 (0)1235 462519 E-mail [email protected] Website www.bowman.co.uk
LRQ 0960929
Cored bars
Inner Inner Outer Outer Length Length Inner Inner Outer Outer Length Length
Part Code Ød/mm Ød/inch ØD/mm ØD/inch L/mm L/inch Part Code Ød/mm Ød/inch ØD/mm ØD/inch L/mm L/inch
AC 008016104 12.7 1
⁄2” 25.4 1” 165 6 1⁄2” AC 028042104 44.45 1 3⁄4” 66.67 2 5⁄8” 165 6 1⁄2”
AC 008018104 12.7 1
⁄2” 28.57 1 1⁄8” 165 6 1⁄2” AC 028044104 44.45 1 3⁄4” 69.85 2 3⁄4” 165 6 1⁄2”
AC 008020104 12.7 1
⁄2” 31.75 1 1⁄4” 165 6 1⁄2” AC 028048104 44.45 1 3⁄4” 76.2 3” 165 6 1⁄2”
AC 008024104 12.7 1
⁄2” 38.1 1 1⁄2” 165 6 1⁄2” AC 028056104 44.45 1 3⁄4” 88.9 3 1⁄2” 165 6 1⁄2”
AC 008032104 12.7 1
⁄2” 50.8 2” 165 6 1⁄2” AC 028068104 44.45 1 3⁄4” 107.95 4 1⁄4” 165 6 1⁄2”
AC 010016104 15.87 5⁄8” 25.4 1” 165 6 1⁄2” AC 028072104 44.45 1 3⁄4” 114.3 4 1⁄2” 165 6 1⁄2”
AC 010018104 15.87 5
⁄8” 28.57 1 1⁄8” 165 6 1⁄2” AC 304268 47.63 1 7⁄8” 66.68 2 5⁄8” 108 4 1⁄4”
AC 010020104 15.87 5⁄8” 31.75 1 1⁄4” 165 6 1⁄2” AC 304668 47.63 1 7⁄8” 73.03 2 7⁄8” 108 4 1⁄4”
AC 010022104 15.87 5⁄8” 34.92 1 3⁄8” 165 6 1⁄2” AC 305068 47.63 1 7⁄8” 79.38 3 1⁄8” 108 4 1⁄4”
AC 102268 15.87 5⁄8” 34.93 1 3⁄8” 108 4 1⁄4” AC 306668 47.63 1 7⁄8” 104.78 4 1⁄8” 108 4 1⁄4”
AC 010024104 15.87 5⁄8” 38.1 1 1⁄2” 165 6 1⁄2” AC 305468 47.63 1 7⁄8” 85.73 3 3⁄8” 108 4 1⁄4”
AC 102668 15.87 5⁄8” 41.28 1 5⁄8” 108 4 1⁄4” AC 032044104 50.8 2” 69.85 2 3⁄4” 165 6 1⁄2”
AC 010028104 15.87 5⁄8” 44.45 1 3⁄4” 165 6 1⁄2” AC 032048104 50.8 2” 76.2 3” 165 6 1⁄2”
AC 010032104 15.87 5⁄8” 50.8 2” 165 6 1⁄2” AC 032052104 50.8 2” 82.55 3 1⁄4” 165 6 1⁄2”
AC 103468 15.87 5⁄8” 53.98 2 1⁄8” 108 4 1⁄4” AC 032064104 50.8 2” 101.6 4” 165 6 1⁄2”
AC 104268 15.87 5⁄8” 66.68 2 5⁄8” 108 4 1⁄4” AC 032072104 50.8 2” 114.3 4 1⁄2” 165 6 1⁄2”
AC 104668 15.87 5⁄8” 73.03 2-7/8” 108 4 1⁄4” AC 032080104 50.8 2” 127 5” 165 6 1⁄2”
AC 012020104 19.05 3
⁄4” 31.75 1 1⁄4” 165 6 1⁄2” AC 032088104 50.8 2” 139.7 5 1⁄2” 165 6 1⁄2”
AC 012024104 19.05 3⁄4” 38.1 1 1⁄2” 165 6 1⁄2” AC 344668 53.98 2 1⁄8” 73.03 2 7⁄8” 108 4 1⁄4”
AC 012028104 19.05 3⁄4” 44.45 1 3⁄4” 165 6 1⁄2” AC 345068 53.98 2 1⁄8” 79.38 3 1⁄8” 108 4 1⁄4”
AC 012032104 19.05 3⁄4” 50.8 2” 165 6 1⁄2” AC 345468 53.98 2 1⁄8” 85.73 3 3⁄8” 108 4 1⁄4”
AC 012036104 19.05 3
⁄4” 57.15 2 1⁄4” 165 6 1⁄2” AC 345868 53.98 2 1⁄8” 92.08 3 5⁄8” 108 4 1⁄4”
AC 012040104 19.05 3⁄4” 63.5 2 1⁄2” 165 6 1⁄2” AC 346668 53.98 2 1⁄8” 104.78 4 1⁄8” 108 4 1⁄4”
AC 012044104 19.05 3⁄4” 69.85 2 3⁄4” 165 6 1⁄2” AC 036048104 57.15 2 1⁄4” 76.2 3” 165 6 1⁄2”
AC 014022104 22.22 7⁄8” 34.92 1 3⁄8” 165 6 1⁄2” AC 036052104 57.15 2 1⁄4” 82.55 3 1⁄4” 165 6 1⁄2”
AC 014024104 22.22 7
⁄8” 38.1 1 1⁄2” 165 6 1⁄2” AC 036056104 57.15 2 1⁄4” 88.9 3 1⁄2” 165 6 1⁄2”
AC 142668 22.22 7⁄8” 41.28 1 5⁄8” 108 4 1⁄4” AC 036060104 57.15 2 1⁄4” 95.25 3 3⁄4” 165 6 1⁄2”
AC 014032104 22.22 7⁄8” 50.8 2” 165 6 1⁄2” AC 036064104 57.15 2 1⁄4” 101.6 4” 165 6 1⁄2”
AC 143468 22.22 7⁄8” 53.98 2 1⁄8” 108 4 1⁄4” AC 036072104 57.15 2 1⁄4” 114.3 4 1⁄2” 165 6 1⁄2”
AC 014036104 22.22 7
⁄8” 57.15 2 1⁄4” 165 6 1⁄2” AC 038048104 60.32 2 3⁄8” 76.2 3” 165 6 1⁄2”
AC 016024104 25.4 1” 38.1 1 1⁄2” 165 6 1⁄2” AC 385068 60.32 2 3⁄8” 79.38 3 1⁄8” 108 4 1⁄4”
AC 016026104 25.4 1” 41.27 1 5⁄8” 165 6 1⁄2” AC 038056104 60.32 2 3⁄8” 88.9 3 1⁄2” 165 6 1⁄2”
AC 016028104 25.4 1” 44.45 1 3⁄4” 165 6 1⁄2” AC 038064104 60.32 2 3⁄8” 101.6 4” 165 6 1⁄2”
AC 016032104 25.4 1” 50.8 2” 165 6 1⁄2” AC 386668 60.32 2 3⁄8” 104.78 4 1⁄8” 108 4 1⁄4”
AC 016036104 25.4 1” 57.15 2 1⁄4” 165 6 1⁄2” AC 387068 60.32 2 3⁄8” 111.13 4 3⁄8” 108 4 1⁄4”
AC 016040104 25.4 1” 63.5 2 1⁄2” 165 6 1⁄2” AC 038072104 60.32 2 3⁄8” 114.3 4 1⁄2” 165 6 1⁄2”
AC 016048104 25.4 1” 76.2 3” 165 6 1⁄2” AC 040056104 63.5 2 1⁄2” 88.9 3 1⁄2” 165 6 1⁄2”
AC 016056104 25.4 1” 88.9 3 1⁄2” 165 6 1⁄2” AC 040060104 63.5 2 1⁄2” 95.25 3 3⁄4” 165 6 1⁄2”
AC 016064104 25.4 1” 101.6 4” 165 6 1⁄2” AC 040064104 63.5 2 1⁄2” 101.6 4” 165 6 1⁄2”
AC 183068 28.58 1 1⁄8” 47.63 1 7⁄8” 108 4 1⁄4” AC 040068104 63.5 2 1⁄2” 107.95 4 1⁄4” 165 6 1⁄2”
AC 018034104 28.58 1 1⁄8” 53.98 2 1⁄8” 165 6 1⁄2” AC 040072104 63.5 2 1⁄2” 114.3 4 1⁄2” 165 6 1⁄2”
AC 183468 28.58 1 1⁄8” 53.98 2 1⁄8” 108 4 1⁄4” AC 040080104 63.5 2 1⁄2” 127 5” 165 6 1⁄2”
AC 184268 28.58 1 1⁄8” 66.68 2 5⁄8” 108 4 1⁄4” AC 425468 66.68 2 5⁄8” 85.73 3 3⁄8” 108 4 1⁄4”
AC 185068 28.58 1 1⁄8” 79.38 3 1⁄8” 108 4 1⁄4” AC 425868 66.68 2 5⁄8” 92.08 3 5⁄8” 108 4 1⁄4”
AC 185468 28.58 1 ⁄8”
1
85.73 3 3⁄8” 108 4 1⁄4” AC 426668 66.68 2 5⁄8” 104.78 4 1⁄8” 108 4 1⁄4”
AC 020028104 31.75 1 1⁄4” 44.45 1 3⁄4” 165 6 1⁄2” AC 044060104 69.85 2 3⁄4” 95.25 3 3⁄4” 165 6 1⁄2”
AC 020032104 31.75 1 1⁄4” 50.8 2” 165 6 1⁄2” AC 466268 73.03 2 7⁄8” 98.43 3 7⁄8” 108 4 1⁄4”
AC 020036104 31.75 1 1⁄4” 57.15 2 1⁄4” 165 6 1⁄2” AC 466668 73.03 2 7⁄8” 104.78 4 1⁄8” 108 4 1⁄4”
AC 020040104 31.75 1 ⁄4”
1
63.5 2 1⁄2” 165 6 1⁄2” AC 469042 73.03 2 7⁄8” 142.8 5 5⁄8” 66.7 2 5⁄8”
AC 020048104 31.75 1 1⁄4” 76.2 3” 165 6 1⁄2” AC 469058 73.03 2 7⁄8” 142.8 5 5⁄8” 92 3 5⁄8”
AC 020056104 31.75 1 1⁄4” 88.9 3 1⁄2” 165 6 1⁄2” AC 469068 73.03 2 7⁄8” 142.8 5 5⁄8” 108 4 1⁄4”
AC 020064104 31.75 1 1⁄4” 101.6 4” 165 6 1⁄2” AC 048060104 76.2 3” 95.25 3 3⁄4” 165 6 1⁄2”
AC 022032104 34.92 1 ⁄8”
3
50.8 2” 165 6 1⁄2” AC 048064104 76.2 3” 101.6 4” 165 6 1⁄2”
AC 223468 34.92 1 3⁄8” 53.98 2 1⁄8” 108 4 1⁄4” AC 048072104 76.2 3” 114.3 4 1⁄2” 165 6 1⁄2”
AC 223868 34.92 1 3⁄8” 60.33 2 3⁄8” 108 4 1⁄4” AC 048080104 76.2 3” 127 5” 165 6 1⁄2”
AC 022044104 34.92 1 3⁄8” 69.85 2 3⁄4” 165 6 1⁄2” AC 048096104 76.2 3” 152.4 6” 165 6 1⁄2”
AC 225868 34.92 1 ⁄8”
3
92.08 3 5⁄8” 108 4 1⁄4” AC 506668 79.38 3 1⁄8” 104.78 4 1⁄8” 108 4 1⁄4”
AC 024032104 38.1 1 1⁄2” 50.8 2” 165 6 1⁄2” AC 052068104 82.55 3 1⁄4” 107.95 4 1⁄4” 165 6 1⁄2”
AC 024036104 38.1 1 1⁄2” 57.15 2 1⁄4” 165 6 1⁄2” AC 056076104 88.9 3 1⁄2” 120.65 4 3⁄4” 165 6 1⁄2”
AC 024040104 38.1 1 1⁄2” 63.5 2 1⁄2” 165 6 1⁄2” AC 056080104 88.9 3 1⁄2” 127 5” 165 6 1⁄2”
AC 024044104 38.1 1 ⁄2”1
69.85 2 3⁄4” 165 6 1⁄2” AC 056096104 88.9 3 1⁄2” 152.4 6” 165 6 1⁄2”
AC 024048104 38.1 1 1⁄2” 76.2 3” 165 6 1⁄2” AC 060080104 95.25 3 3⁄4” 127 5” 165 6 1⁄2”
AC 024056104 38.1 1 1⁄2” 88.9 3 1⁄2” 165 6 1⁄2” AC 064088104 101.6 4” 139.7 5 1⁄2” 165 6 1⁄2” Non-standard lengths can be
AC 024064104 38.1 1 1⁄2” 101.6 4” 165 6 1⁄2” AC 064096104 101.6 4” 152.4 6” 165 6 1⁄2” supplied. If the size you require is not
AC 263868 41.28 1 5⁄8” 60.33 2 3⁄8” 108 4 1⁄4” AC 064112104 101.6 4” 177.8 7” 165 6 1⁄2” listed please contact our sales dept.
AC 264668 41.28 1 5⁄8” 73.03 2 7⁄8” 108 4 1⁄4” AC 064128104 101.6 4” 203.2 8” 165 6 1⁄2” We also offer a specialised machining
service for low volume non-standard
AC 265868 41.28 1 5⁄8” 92.08 3 5⁄8” 108 4 1⁄4” AC 072096104 114.3 4 1⁄2” 152.4 6” 165 6 1⁄2”
sizes and tolerances.
AC 028036104 44.45 1 3⁄4” 57.15 2 1⁄4” 165 6 1⁄2” AC 080112104 127 5” 177.8 7” 165 6 1⁄2” Bowman International Limited reserve the right to
AC 028040104 44.45 1 3⁄4” 63.5 2 1⁄2” 165 6 1⁄2” AC 096128104 152.4 6” 203.2 8” 165 6 1⁄2” change specifications without prior notice E & OE

Bowman International Limited reserve the right to change specifications without prior notice E & OE

BOWMAN INTERNATIONAL LIMITED


12 10 Isis Court, Wyndyke Furlong, Abingdon Business Park, Abingdon, Oxfordshire, OX14 1DZ England
Tel +44 (0)1235 462500 Fax +44 (0)1235 462519 E-mail [email protected] Website www.bowman.co.uk
LRQ 0960929
Solid bars
Diameter Diameter Length Length Diameter Diameter Length Length
Part Code O D/mm O D/inch L/mm L/inch Part Code O D/mm O D/inch L/mm L/inch
AB 004020 6.35 1
⁄4” 31.75 1 1⁄4” AB 000026104 41.27 1 5⁄8” 165 6 1⁄2”
AB 000004032 6.35 1
⁄4” 50.8 2” AB 002844 44.45 1 3⁄4” 69.85 2 3⁄4”
AB 000006048 9.52 3
⁄8” 76.2 3” AB 000028104 44.45 1 3⁄4” 165 6 1⁄2”
AB 000624 9.52 3
⁄8” 381 1 1⁄2” AB 003868 47.63 1 7⁄8” 108 4 1⁄4”
AB 000824 12.7 1
⁄2” 38.1 1 1⁄2” AB 003244 50.8 2” 69.85 2 3⁄4”
AB 000008104 12.7 1
⁄2” 165 6 1⁄2” AB 000032104 50.8 2” 165 6 1⁄2”
AB 000010104 15.88 5
⁄8” 165 6 1⁄2” AB 003468 53.98 2 1⁄8” 108 4 1⁄4”
AB 001032 15.88 5
⁄8” 50.8 2” AB 000036104 57.15 2 1⁄4” 165 6 1⁄2”
AB 001232 19.05 3
⁄4” 50.8 2” AB 000038104 60.32 2 3⁄8” 165 6 1⁄2”
AB 000012104 19.05 3
⁄4” 165 6 1⁄2” AB 000040104 63.5 2 1⁄2” 165 6 1⁄2”
AB 000014104 22.22 7
⁄8” 165 6 1⁄2” AB 004268 66.68 2 5⁄8” 108 4 1⁄4”
AB 001432 22.22 7
⁄8” 50.8 2” AB 000048104 76.2 3” 165 6 1⁄2”
AB 001640 25.4 1” 63.5 2 1⁄2” AB 005068 79.38 3 1⁄8” 108 4 1⁄4”
AB 000016104 25.4 1” 165 6 1⁄2” AB 000052104 82.55 3 1⁄4” 165 6 1⁄2”
AB 001868 28.57 1 ⁄8”
1
108 4 ⁄4”
1
AB 000056104 88.9 3 ⁄2”
1
165 6 1⁄2”
AB 000018104 28.57 1 1⁄8” 165 6 1⁄2” AB 005868 92.08 3 5⁄8” 108 4 1⁄4”
AB 002040 31.75 1 1⁄4” 63.5 2 1⁄2” AB 000064104 101.6 4” 165 6 1⁄2”
AB 000020104 31.75 1 1⁄4” 165 6 1⁄2” AB 006668 104.78 4 1⁄8” 108 4 1⁄4”
AB 002244 34.92 1 3⁄8” 69.85 2 3⁄4” AB 000072104 114.3 4 1⁄2” 165 6 1⁄2”
AB 002268 34.92 1 3⁄8” 108 4 1⁄4” AB 000080104 127 5” 165 6 1⁄2”
AB 000022104 34.92 1 3⁄8” 165 6 1⁄2” AB 000088104 139.7 5 1⁄2” 165 6 1⁄2”
AB 000024104 38.1 1 1⁄2” 165 6 1⁄2” AB 000096104 152.4 6” 165 6 1⁄2”
AB 002644 41.27 1 5⁄8” 69.85 2 3⁄4” AB 000112104 177.8 7” 165 6 1⁄2”
AB 002668 41.27 1 5⁄8” 108 4 1⁄4” AB 000128104 203.2 8” 165 6 1⁄2”
We also offer specialised machining service for special sizes of bearings according to customers specific requirements.

Plates
A (Width) B (Length) L (Thickness)
Part Code mm inch mm inch mm inch
AP 010413 25.4 1” 108 4 1⁄4” 3.2 1
⁄8”
AP 010475 25.4 1” 108 4 1⁄4” 19.05 3
⁄4”
AP 050863 127 5” 203 8” 15.9 5
⁄8”
AP 061238 152 6” 305 12” 9.5 3
⁄8”
AP 101038 254 10” 254 10” 9.5 3
⁄8”
The 5 listed plates above are to be discontinued and will only be available while stocks last.

A (Width) B (Length) L (Thickness) A (Width) B (Length) L (Thickness)


Part Code mm inch mm inch mm inch Part Code mm inch mm inch mm inch
AP 0804004 12.7 1
⁄2” 63 2 1⁄2” 6.35 1
⁄4” AP 8009616 127.0 5” 152 6” 25.40 1”
AP 1805003 28.5 1 1⁄8” 79 3 1⁄8” 4.75 3
⁄16” AP 8012802 127.0 5” 203 8” 3.17 1
⁄8”
AP 3213004 50.8 2” 206 8 1⁄8” 6.35 1
⁄4” AP 8012803 127.0 5” 203 8” 4.75 3
⁄16”
AP 3213008 50.8 2” 206 8 1⁄8” 12.70 1
⁄2” AP 8012804 127.0 5” 203 8” 6.35 1
⁄4”
AP 4819204 76.2 3” 304 12” 6.35 1
⁄4” AP 8012808 127.0 5” 203 8” 12.70 1
⁄2”
AP 4819208 76.2 3” 304 12” 12.70 1
⁄2” AP 8012812 127.0 5” 203 8” 19.05 3
⁄4”
AP 4819212 76.2 3” 304 12” 19.05 3
⁄4” AP 8012816 127.0 5” 203 8” 25.40 1”
AP 4819216 76.2 3” 304 12” 25.40 1” AP 9619202 152.0 6” 304 12” 3.17 1
⁄8”
AP 8009602 127.0 5” 152 6” 3.17 1
⁄8” AP 9619203 152.0 6” 304 12” 4.75 3
⁄16”
AP 8009603 127.0 5” 152 6” 4.75 3
⁄16” AP 9619204 152.0 6” 304 12” 6.35 1
⁄4”
AP 8009604 127.0 5” 152 6” 6.35 1
⁄4” AP 9619206 152.0 6” 304 12” 9.52 3
⁄8”
AP 8009606 127.0 5” 152 6” 9.52 3
⁄8” AP 9619208 152.0 6” 304 12” 12.70 1
⁄2”
AP 8009608 127.0 5” 152 6” 12.70 1
⁄2” AP 9619210 152.0 6” 304 12” 15.87 5
⁄8”
AP 8009610 127.0 5” 152 6” 15.87 5
⁄8” AP 9619212 152.0 6” 304 12” 19.05 3
⁄4”
AP 8009612 127.0 5” 152 6” 19.05 3
⁄4” AP 9619216 152.0 6” 304 12” 25.40 1”
Thickness +0.250 -0.127 mm +0.010 -0.005 inch Width and length will finish to the dimensions shown.

Circular Bearing Plates Circular Bearing Discs


Inside Dia. Outside Dia. Thickness Outside Dia. Thickness
Part Code mm inch mm inch mm inch Part Code mm inch mm inch
CD 3001 25.4 1” 76.2 3” 6.35 1
⁄4” DD 3000 76.2 3” 6.35 1
⁄4”
CD 4001 25.4 1” 101.6 4” 6.35 1
⁄4” DD 3000-1 76.2 3” 6.35 1
⁄4”
CD 4002 50.8 2” 101.6 4” 6.35 1
⁄4” DD 4000 101.6 4” 6.35 1
⁄4”
CD 5500 50.8 2” 139.7 5 1⁄2” 6.35 1
⁄4” DD5602-1 142.8 5 5⁄8” 6.35 1
⁄4”
CD 4502 57.1 2 1⁄4” 114.3 4 1⁄2” 6.35 1
⁄4”
CD6003 101.6 4” 152.4 6” 6.35 1
⁄4”
Circular rings and discs are only manufactured to order. Thickness to. +/- 0.09mm +/- 0.0035inch. Outside and inside diameters will finish to dimensions shown.

Bowman International Limited reserve the right to change specifications without prior notice E & OE

BOWMAN INTERNATIONAL LIMITED


10 Isis Court, Wyndyke Furlong, Abingdon Business Park, Abingdon, Oxfordshire, OX14 1DZ England 13
Tel +44 (0)1235 462500 Fax +44 (0)1235 462519 E-mail [email protected] Website www.bowman.co.uk
LRQ 0960929

Metric Spherical Bearings Metric Spherical Bearings with Collars


Reference Reference
Bore Spherical Diameter Length Bore Spherical Dia Collar Dia Collar Length
3.18 8 6 4 9 6 2
3.5 8 6 5 12 9 3
4 8 6 6 12 9 2
4 9 5
All spherical bearings can be supplied in various grades of sintered bronze
4 10 7 and iron, with lubricants to suit different applications. Spherical bearings
4 12 8 can be supplied with one or two collars. Various bore tolerances and
4.5 9 5 non-standard lengths can be supplied. Imperial sizes also available.
4.5 12 8
5 10 7
5 12 8
5 12 9
5 13 8
5 13 9
6 10 4
6 12 8
6 12 9
6 13 8
6 13 9
7 13 8
7 14 10
7 16 11
8 13.5 9
8 14 10
8 16 11
9 16 12

Bowman International Limited reserve the right to change specifications without prior notice E & OE

BOWMAN INTERNATIONAL LIMITED


14 10 Isis Court, Wyndyke Furlong, Abingdon Business Park, Abingdon, Oxfordshire, OX14 1DZ England
Tel +44 (0)1235 462500 Fax +44 (0)1235 462519 E-mail [email protected] Website www.bowman.co.uk
Technical Data

BOWMAN INTERNATIONAL LIMITED


10 Isis Court, Wyndyke Furlong, Abingdon Business Park, Abingdon, Oxfordshire, OX14 1DZ England
Tel +44 (0)1235 462500 Fax +44 (0)1235 462519
E-mail [email protected] Websites www.bowman.co.uk
www.oilitebearings.com (European Customers) www.oilite.com (USA and Canadian Customers)

15
LRQ 0960929

Technical information
Lubrication
Standard OILITE® bearings are impregnated with a highly refined mineral oil to ISO VG (SAE 30) having a high viscosity
index and containing anti-oxidant, anti-rust and defoamant additives.
To prevent possible seizures with stainless steel, hard-chromium and nickel plated shafts, an addition of molybdenum
disulphide to the impregnation oil must be specified.
Any particular application thought to be outside standard conditions should be referred to our Technical Department.
However, here are some basic rules:
1. Low viscosity oil for low temperatures, high speeds or light loads
2. High viscosity oil for high temperatures, low speeds or heavy loads
3. High viscosity index oil for wide variations in operating temperatures
4. Oxidation stable oils for long-period usage
5. Oil with ‘oiliness’ additives for boundary conditions
6. Oil of lesser ‘oiliness’ for full film (hydrodynamic) conditions
7. Oil with Extreme Pressure (E.P.) additives for very heavy or shock loads

Fitting
Before fitting make sure that all sharp edges are removed from the housing and mating shaft. The bearing must be free from
grit and dust.
Always use a fitting pin (see sketch below) and steady pressure to insert the bearing. Never use hammer blows. Shafts should
ideally be hardened to approximately HRC 60 and ground to a surface roughness of Ra = 0.25 m. (Refer to fitting data page).
Note: In extreme circumstances a combination of tolerances can make insertion of the fitting pin difficult. For advice on the
recommended course of action in such cases contact our Technical Department on the number below.

Storage
OILITE® bearings can be stored for considerable periods without deterioration or loss of oil if kept in a metal or other non-
absorbent container, at room temperature. Proximity to heat could cause oil loss by sweating, in which case
re-oiling is necessary before fitting. Wash in oil if storage conditions are in doubt.

Re-oiling
After machining of the bearing, or following oil loss during storage, immerse in high quality mineral oil to ISO VG 68 or ISO VG
150 (SAE 30 or SAE 40) at 60°C to 70°C for 10 to 15 minutes and then cool in cold oil.

Machining
A specialised Machine Shop is available and we would be pleased to quote for your specific requirements.

For customers who prefer to machine OILITE® materials themselves, please contact our technical department and request our
machining recommendations brochure or download the document from www.oilitebearings.com.

Design suggestion for bearing fitting tool

DIA to suit press

‘O’ ring
to hold
bearing
in place

Bowman International Limited reserve the right to change specifications without prior notice E & OE

BOWMAN INTERNATIONAL LIMITED


16 10 Isis Court, Wyndyke Furlong, Abingdon Business Park, Abingdon, Oxfordshire, OX14 1DZ England
Tel +44 (0)1235 462500 Fax +44 (0)1235 462519 E-mail [email protected] Website www.bowman.co.uk
LRQ 0960929
Oilite® materials
Radial Static
Material Copper (Cu) Iron (Fe) Carbon (C) Tin (Sn) Other Open Oil Crushing Density Load PV Factor Dynamic V max
% % % % Elements Porosity Content Strength P Nominal Max N/mm2 Load max m/s
Max % P Min % Min % K Min N/mm2 g/cc N/mm2 x m/s N/mm2

Oilite® MB01-1 Balance 1.0 Max <0.3 9 .0 - 11.0 2.0 27 24 120 6.0 35 1.8 10 6.0
MB01-2 Balance 1.0 Max <0.3 9 .0 - 11.0 2.0 22 20 160 6.6 50 1.8 14 5.0
MB01-3 Balance 1.0 Max <0.3 9 .0 - 11.0 2.0 20 18 180 7.0 65 1.8 18 5.5
Iron Oilite® MB02-3 Nil Balance <0.3 Nil 2.0 17 15 220 6.2 90 1.4 20 2.0
Super Oilite® 18.0 - 22.0 Balance <0.3 Nil 2.0 21 19 275 6.0 120 1.3 28 1.0
Super Oilite 16® 18.0 - 22.0 Balance 0.6 - 1.0 Nil 2.0 17 15 410 6.2 300 2.6 55 0.2
Super Oilite® 900 MB04-1 24.0 - 26.0 Balance Nil Nil 2.0 22 20 275 6.0 120 1.4 28 1.0

MB01-1 Non standard available on request.


MB01-2 All products unless otherwise stated.
MB01-3 Applicable to DIN standard.
Other bearing materials for special applications are also available
NOTES: 1. Density, oil content and open porosity determined according to BS EN ISO 2738:2000
2. Radial crushing strength, according to BS EN ISO 2739:2010
3. PV factor = Pressure (N/mm ) x bearing surface velocity (m/s) where pressure =
2

load (N) ÷ Projected area (d x L) and d = inside diameter (mm).


4. Bars, Cored Bars and Plates may contain up to 1% C.

Nearest equivalent specifications


UK
BS5600 France Germany U.S.A.
MATERIAL MB ISO Part 5 NF ISO DIN
Grade 5755 Section 5.1 5755/1 30 910 M.P.I.F. S.A.E. A.S.T.M.
2001 1988 A 95-771-1 PART 3 STAND. 35
Oilite® MB01-1 C-T10-K110 P4011Z FU-E10-60 CT-1000-K19 840 B438
Grd 1 Type 1
Bronze MB01-2 C-T10-K140 P4012Z FU-E10-64 Sint A50 CT-1000-K26 841 B438
Grd 1 Type 2
MB01-3 C-T10-K180 P4013Z FU-E10-68 Sint B50 CT-1000-K37 842 B438
Grd 1 Type 3

Lubricants and additives


The standard stock range of Oilite® bearings is impregnated with a mineral oil SAE 30; all
machined Oilite® bearings and plates are supplied fully impregnated after machining. A wide
range of lubricants are available to meet specific requirements within a temperature range of -
60˚C to 200˚C, lubricant additives are also available to impart anti-wear properties in marginal
lubrication conditions. Special additives are also available for use with various shaft materials
and finishes.
It is highly recommended that additives are employed when using stainless steel shafts. Please
contact our technical department for advice on specific applications.

Bowman International Limited reserve the right to change specifications without prior notice E & OE

BOWMAN INTERNATIONAL LIMITED


10 Isis Court, Wyndyke Furlong, Abingdon Business Park, Abingdon, Oxfordshire, OX14 1DZ England 17
Tel +44 (0)1235 462500 Fax +44 (0)1235 462519 E-mail [email protected] Website www.bowman.co.uk
LRQ 0960929
Metric plain bearings to ISO 2795 – fitting data
Basic Sizes Ø dH (H7) Ø Dp (m5) Ø dF (H7) Ø Ds (f7)
Part Code Ød ØD Min. Max. Min. Max. Min. Max. Min. Max.
AM 0205 2 5 5.000 5.012 2.002 2.006 2.000 2.010 1.984 1.994
AM 0305 3 5 5.000 5.012 3.002 3.006 3.000 3.010 2.984 2.994
AM 0306 3 6 6.000 6.012 3.002 3.006 3.000 3.010 2.984 2.994
AM 0407 4 7 7.000 7.015 4.004 4.009 4.000 4.012 3.978 3.990
AM 0408 4 8 8.000 8.015 4.004 4.009 4.000 4.012 3.978 3.990
AM 0508 5 8 8.000 8.015 5.004 5.009 5.000 5.012 4.978 4.990
AM 0509 5 9 9.000 9.015 5.004 5.009 5.000 5.012 4.978 4.990
AM 0609 6 9 9.000 9.015 6.004 6.009 6.000 6.012 5.978 5.990 Fitting Pin
AM 0610 6 10 10.000 10.015 6.004 6.009 6.000 6.012 5.978 5.990
AM 0710 7 10 10.000 10.015 7.005 7.012 7.000 7.015 6.792 6.987
AM 0711 7 11 11.000 11.018 7.005 7.012 7.000 7.015 6.972 6.987
AM 0811 8 11 11.000 11.018 8.006 8.012 8.000 8.015 7.972 7.987
AM 0812 8 12 12.000 12.018 8.006 8.012 8.000 8.015 7.972 7.987
AM 0814 8 14 14.000 14.018 8.006 8.012 8.000 8.015 7.972 7.987
AM 0912 9 12 12.000 12.018 9.006 9.012 9.000 9.015 8.972 8.987
AM 0914 9 14 14.000 14.018 9.006 9.012 9.000 9.015 8.972 8.987
AM 1013 10 13 13.000 13.018 10.006 10.012 10.000 10.015 9.972 9.987
AM 1014 10 14 14.000 14.018 10.006 10.012 10.000 10.015 9.972 9.987
Free Bush
AM 1015 10 15 15.000 15.018 10.006 10.012 10.000 10.015 9.972 9.987
AM 1016 10 16 16.000 16.018 10.006 10.012 10.000 10.015 9.972 9.987
AM 1215 12 15 15.000 15.018 12.007 12.015 12.000 12.018 11.966 11.984
AM 1216 12 16 16.000 16.018 12.007 12.015 12.000 12.018 11.966 11.984
AM 1218 12 18 18.000 18.018 12.007 12.015 12.000 12.018 11.966 11.984
AM 1418 14 18 18.000 18.018 14.007 14.015 14.000 14.018 13.966 13.984
AM 1420 14 20 20.000 20.021 14.007 14.015 14.000 14.018 13.966 13.984
AM 1519 15 19 19.000 19.021 15.007 15.015 15.000 15.018 14.966 14.984
AM 1521 15 21 21.000 21.021 15.007 15.015 15.000 15.018 14.966 14.984
AM 1620 16 20 20.000 20.021 16.007 16.015 16.000 16.018 15.966 15.984
AM 1622 16 22 22.000 22.021 16.007 16.015 16.000 16.018 15.966 15.984
AM 1822 18 22 22.000 22.021 18.007 18.015 18.000 18.018 17.966 17.984
AM 1824 18 24 24.000 24.021 18.007 18.015 18.000 18.018 17.966 17.984
AM 1825 18 25 25.000 25.021 18.007 18.015 18.000 18.018 17.966 17.984 Housing
AM 2024 20 24 24.000 24.021 20.008 20.017 20.000 20.021 19.959 19.980
AM 2025 20 25 25.000 25.021 20.008 20.017 20.000 20.021 19.959 19.980
AM 2026 20 26 26.000 26.021 20.008 20.017 20.000 20.021 19.959 19.980
AM 2028 20 28 28.000 28.021 20.008 20.017 20.000 20.021 19.959 19.980
AM 2227 22 27 27.000 27.021 22.008 22.017 22.000 22.021 21.959 21.980
AM 2228 22 28 28.000 28.021 22.008 22.017 22.000 22.021 21.959 21.980
AM 2232 22 32 32.000 32.025 22.008 22.017 22.000 22.021 21.959 21.980
AM 2530 25 30 30.000 30.021 25.008 25.017 25.000 25.021 24.959 24.980
AM 2532 25 32 32.000 32.025 25.008 25.017 25.000 25.021 24.959 24.980
AM 2535 25 35 35.000 35.025 25.008 25.017 25.000 25.021 24.959 24.980
AM 2836 28 36 36.000 36.025 28.008 28.017 28.000 28.021 27.959 27.980
AM 3035 30 35 35.000 35.025 30.008 30.017 30.000 30.021 29.595 29.980
AM 3038 30 38 38.000 38.025 30.008 30.017 30.000 30.021 29.959 29.980
AM 3040 30 40 40.000 40.025 30.008 30.017 30.000 30.021 29.959 29.980 Fitted Bush Shaft
AM 3238 32 38 38.000 38.025 32.009 32.020 32.000 32.025 31.950 31.975
AM 3240 32 40 40.000 40.025 32.009 32.020 32.000 32.025 31.950 31.975
AM 3541 35 41 41.000 41.025 35.009 35.020 35.000 35.025 34.950 34.975
AM 3544 35 44 44.000 44.025 35.009 35.020 35.000 35.025 34.950 34.975
AM 3545 35 45 45.000 45.025 35.009 35.020 35.000 35.025 34.950 34.975
AM 3642 36 42 42.000 42.025 36.009 36.020 36.000 36.025 35.950 35.975
AM 3645 36 45 45.000 45.025 36.009 36.020 36.000 36.025 35.950 35.975
AM 3844 38 44 44.000 44.025 38.009 38.020 38.000 38.025 37.950 37.975
AM 3848 38 48 48.000 48.025 38.009 38.020 38.000 38.025 37.950 37.975
AM 4046 40 46 46.000 46.025 40.009 40.020 40.000 40.025 39.950 39.975
AM 4050 40 50 50.000 50.025 40.009 40.020 40.000 40.025 39.950 39.975
AM 4248 42 48 48.000 48.025 42.009 42.020 42.000 42.025 41.950 41.975
AM 4252 42 52 52.000 52.030 42.009 42.020 42.000 42.039 41.950 41.975
AM 4551 42 51 51.000 51.030 45.009 45.020 45.000 45.039 41.950 41.975
AM 4555 45 55 55.000 55.030 45.009 45.020 45.000 45.039 44.950 44.975
AM 4556 45 56 56.000 56.030 45.009 45.020 45.000 45.039 44.950 44.975
AM 4855 48 55 55.000 55.030 48.009 48.020 48.000 48.039 47.950 47.975
AM 4858 48 58 58.000 58.030 48.009 48.020 48.000 48.039 47.950 47.975
AM 5060 50 60 60.000 60.030 50.009 50.020 50.000 50.039 49.950 49.975
AM 5563 55 63 63.000 63.030 55.010 55.024 55.000 55.046 54.940 54.970
AM 5565 55 65 65.000 65.030 55.010 55.024 55.000 55.046 54.940 54.970
AM 6068 60 68 68.000 68.030 60.010 60.024 60.000 60.046 59.940 59.970
AM 6070 60 70 70.000 70.030 60.010 60.024 60.000 60.046 59.940 59.970
AM 6072 60 72 72.000 72.030 60.010 60.024 60.000 60.046 59.940 59.970
AM 6370 63 70 70.000 70.030 63.010 63.024 63.000 63.046 62.940 62.970
Bowman International Limited reserve the right to change specifications without prior notice E & OE

BOWMAN INTERNATIONAL LIMITED


18 10 Isis Court, Wyndyke Furlong, Abingdon Business Park, Abingdon, Oxfordshire, OX14 1DZ England
Tel +44 (0)1235 462500 Fax +44 (0)1235 462519 E-mail [email protected] Website www.bowman.co.uk
LRQ 0960929
Metric flanged bearings to ISO 2795 – fitting data
Basic Sizes Ø dH (H7) Ø Dp (m5) Ø dF (H7) Ø Ds (f7)
Part Code Ød ØD Min. Max. Min. Max. Min. Max. Min. Max.
AL 0205 02 05 5.000 5.012 2.002 2.006 2.000 2.010 1.984 1.994
AL 0306 03 06 6.000 6.012 3.002 3.006 3.000 3.010 2.984 2.994
AL 0408 04 08 8.000 8.015 4.004 4.009 4.000 4.012 3.978 3.990
AL 0509 05 09 9.000 9.015 5.004 5.009 5.000 5.012 4.978 4.990
AL 0610 06 10 10.000 10.015 6.004 6.009 6.000 6.012 5.978 5.990
AL 0711 07 11 11.000 11.018 7.005 7.012 7.000 7.015 6.972 6.987
AL 0812 08 12 12.000 12.018 8.005 8.012 8.000 8.015 7.972 7.987 Fitting Pin
AL 1013 10 13 13.000 13.018 10.005 10.012 10.000 10.015 9.972 9.987
AL 1015 10 15 15.000 15.018 10.005 10.012 10.000 10.015 9.972 9.987
AL 1016 10 16 16.000 16.018 10.005 10.012 10.000 10.015 9.972 9.987
AL 1215 12 15 15.000 15.018 12.006 12.015 12.000 12.018 11.966 11.984
AL 1217 12 17 17.000 17.018 12.006 12.015 12.000 12.018 11.966 11.984
AL 1218 12 18 18.000 18.018 12.006 12.015 12.000 12.018 11.966 11.984
AL 1420 14 20 20.000 20.021 14.006 14.015 14.000 14.018 13.966 13.984
AL 1519 15 19 19.000 19.021 15.006 15.015 15.000 15.018 14.966 14.984
AL 1521 15 21 21.000 21.021 15.006 15.015 15.000 15.018 14.966 14.984
AL 1620 16 20 20.000 20.021 16.006 16.015 16.000 16.018 15.966 15.984 Free Bush
AL 1622 16 22 22.000 22.021 16.006 16.015 16.000 16.018 15.966 15.984
AL 1824 18 24 24.000 24.021 18.006 18.015 18.000 18.018 17.966 17.984
AL 2024 20 24 24.000 24.021 20.007 20.017 20.000 20.021 19.959 19.980
AL 2026 20 26 26.000 26.021 20.007 20.017 20.000 20.021 19.959 19.980
AL 2228 22 28 28.000 28.021 22.007 22.017 22.000 20.021 21.959 21.980
AL 2530 25 30 30.000 30.021 25.007 25.017 25.000 22.021 24.959 24.980
AL 2532 25 32 32.000 32.025 25.007 25.017 25.000 25.021 24.959 24.980
AL 2836 28 36 36.000 36.025 28.007 28.017 28.000 28.021 27.959 27.980
AL 3038 30 38 38.000 38.025 30.007 30.017 30.000 30.021 29.959 29.980
AL 3238 32 38 38.000 38.025 32.009 32.020 32.000 32.025 31.950 31.975
AL 3240 32 40 40.000 40.025 32.009 32.020 32.000 32.025 31.950 31.975
AL 3545 35 45 45.000 45.025 35.009 35.020 35.000 35.025 34.950 34.975 Housing
AL 3848 38 48 48.000 48.025 38.009 38.020 38.000 38.025 37.950 37.975
AL 4046 40 46 46.000 46.025 40.009 40.020 40.000 40.025 39.950 39.975
AL 4050 40 50 50.000 50.025 40.009 40.020 40.000 40.025 39.950 39.975

Basic Sizes Ø dH (H7) Ø Dp (m5) Ø dF (H7) Ø Ds (f7)


Part Code Ød ØD Min. Max. Min. Max. Min. Max. Min. Max.
AL 4252 42 52 52.000 52.030 42.009 42.020 42.000 42.039 41.950 41.975
AL 4555 45 55 55.000 55.030 45.009 45.020 45.000 45.039 44.950 44.975
AL 5060 50 60 60.000 60.030 50.009 50.020 50.000 50.039 49.950 49.975

Metric stock tolerances


Tolerances Fitted Bush Shaft
Plain Bearings Flanged Bearings

Length: L js 13 Length: L js 13
Concentricity: Full indicated movement. D with Flange thickness: e js 13
respect to d: D < 50 mm IT9; D > Flange diameter: D js 13
50 mm, IT10.

Chamfers: 45º chamfers are incorporated on inside and outside diameters at each end of the bush.
Chamfer length varies with bush wall thickness and outside diameter.

Flanged Bearings Plain and Flanged Bearings


Radii (between outside diameter and flange face) Tolerances
Outside Diameter r max. Nominal Sizes (mm) IT9 IT10 JS13
< 12 0.3 - 3 0.025 - +0.070 – 0.070
> 12 < 30 0.6 3 6 0.030 - +0.090 – 0.090
> 30 0.8 6 10 0.036 - +0.110 – 0.110
10 18 0.043 - +0.135 – 0.135
18 30 0.052 - +0.165 – 0.165
30 50 0.062 - +0.195 – 0.195
50 80 - 0.120 +0.230 – 0.230

Bowman International Limited reserve the right to change specifications without prior notice E & OE

BOWMAN INTERNATIONAL LIMITED


10 Isis Court, Wyndyke Furlong, Abingdon Business Park, Abingdon, Oxfordshire, OX14 1DZ England 19
Tel +44 (0)1235 462500 Fax +44 (0)1235 462519 E-mail [email protected] Website www.bowman.co.uk
LRQ 0960929
German metric plain bearings to DIN 1850 – fitting data
Basic Sizes ØdH (H7) ØDp (m5) Ødf (H7/H8) ØDs (f7)
Part No. Ød ØD Max Min Min Max Min Max Min Max
AD0306 3 6 6.000 6.012 3.002 3.006 3.000 3.010 2.984 2.984
AD0408 4 8 8.000 8.015 4.004 4.009 4.000 4.012 3.978 3.990
AD0509 5 9 9.000 9.015 5.004 5.009 5.000 5.012 4.978 4.990
AD0610 6 10 10.000 10.015 6.004 6.009 6.000 6.012 5.978 5.990
AD0612 6 12 12.000 12.018 6.004 6.009 6.000 6.012 5.978 5.990
AD0812 8 12 12.000 12.018 8.006 8.012 8.000 8.015 7.972 7.987
Fitting Pin
AD1016 10 16 16.000 16.018 10.006 10.012 10.000 10.015 9.972 9.987
AD1218 12 18 18.000 18.018 12.007 12.015 12.000 12.018 11.966 11.984
AD1420 14 20 20.000 20.021 14.007 14.015 14.000 14.018 13.966 11.984
AD1520 15 20 20.000 20.021 15.007 15.015 15.000 15.018 14.966 14.984
AD1622 16 22 22.000 22.021 16.007 16.015 16.000 16.018 15.966 15.984
AD1825 18 25 25.000 25.021 18.007 18.015 18.000 18.018 17.966 17.984
AD2026 20 26 26.000 26.021 20.008 20.017 20.000 20.021 19.959 19.980
AD2030 20 30 30.000 30.021 20.008 20.017 20.000 20.021 19.959 19.980
AD2228 22 28 28.000 28.021 22.008 22.017 22.000 22.021 21.959 21.980
AD2532 25 32 32.000 32.025 25.008 25.017 25.000 25.021 24.959 24.980
Free Bush
AD2836 28 36 36.000 36.025 28.008 28.017 28.000 28.021 27.959 27.980
AD3038 30 38 38.000 38.025 30.008 30.017 30.000 30.021 29.959 29.980
AD3040 30 40 40.000 40.025 30.008 30.017 30.000 30.021 29.959 29.980
AD3240 32 40 40.000 40.025 32.009 32.020 32.000 32.025 31.950 29.975
AD3545 35 45 45.000 45.025 35.009 35.020 35.000 35.025 34.950 34.975
AD4050 40 50 50.000 50.025 40.009 40.020 40.000 40.025 39.950 39.975
AD4556 45 56 56.000 45.030 45.009 45.020 45.000 45.025 44.950 44.975
AD5060 50 60 60.000 60.030 50.009 50.020 50.000 50.025 49.950 49.975

German metric flanged bearings to DIN 1850 – fitting data


Housing
Basic Sizes ØdH (H7) ØDp (m5) Ødf (H7/H8) ØDs (f7)
Part No. Ød ØD Max Min Min Max Min Max Min Max
AE0408 4 8 8.000 8.015 4.004 4.009 4.000 4.012 3.978 3.990
AE0610 6 10 10.000 10.015 6.004 6.009 6.000 6.012 5.978 5.990
AE0812 8 12 12.000 12.018 8.006 8.012 8.000 8.015 7.972 7.987
AE1016 10 16 16.000 16.018 10.006 10.012 10.000 10.015 9.972 9.987
AE1216 12 16 16.000 16.018 12.007 12.015 12.000 12.018 11.966 11.984
AE1420 14 20 20.000 20.021 14.007 14.015 14.000 14.018 13.966 13.984
AE1622 16 22 22.000 22.021 16.007 16.015 16.000 16.018 15.966 15.984
AE1824 18 24 24.000 24.021 18.007 18.015 18.000 18.018 17.966 17.984
AE2026 20 26 26.000 26.021 20.008 20.017 20.000 20.021 19.959 19.980

Fitted Bush Shaft

Bowman International Limited reserve the right to change specifications without prior notice E & OE

BOWMAN INTERNATIONAL LIMITED


20 10 Isis Court, Wyndyke Furlong, Abingdon Business Park, Abingdon, Oxfordshire, OX14 1DZ England
Tel +44 (0)1235 462500 Fax +44 (0)1235 462519 E-mail [email protected] Website www.bowman.co.uk
LRQ 0960929
French metric plain bearings – fitting data
Basic Sizes ØdH (H7) ØDp (m5) Ødf (H7/H8) ØDs (f7)
Part No. Ød ØD Max Min Min Max Min Max Min Max
AF0205 2 5 5.000 5.012 2.002 2.006 2.000 2.010 1.984 1.994
AF0306 3 6 6.000 6.012 3.002 3.009 3.000 3.012 2.984 2.994
AF0407 4 7 7.000 7.015 4.004 4.009 4.000 4.012 3.978 3.990
AF0408 4 8 8.000 8.015 4.004 4.009 4.000 4.012 3.978 3.990
AF0508 5 8 8.000 8.015 5.004 5.009 5.000 5.012 4.978 4.990
AF0509 5 9 9.000 9.015 5.004 5.009 5.000 5.012 4.978 4.990
AF0609 6 9 9.000 9.015 6.004 6.009 6.000 6.012 5.978 5.990
AF0610 6 10 10.000 10.015 6.004 6.009 6.000 6.012 5.978 5.990 Fitting Pin
AF0612 6 12 12.000 12.018 6.004 6.009 6.000 6.012 5.978 5.990
AF0710 7 10 10.000 10.015 7.006 7.012 7.000 7.015 6.972 6.987
AF0811 8 11 11.000 11.018 8.006 8.012 8.000 8.015 7.972 7.987
AF0812 8 12 12.000 12.018 8.006 8.012 8.000 8.015 7.972 7.987
AF0814 8 14 14.000 14.018 8.006 8.012 8.000 8.015 7.972 7.987
AF0912 9 12 12.000 12.018 9.006 9.012 9.000 9.015 8.972 8.987
AF1013 10 13 13.000 13.018 10.006 10.012 12.000 10.015 9.972 9.987
AF1014 10 14 14.000 14.018 10.006 10.012 10.000 10.015 9.972 9.987
AF1015 10 15 15.000 15.018 10.006 10.012 10.000 10.015 9.972 9.987
AF1016 10 16 16.000 16.018 10.006 10.012 10.000 10.015 9.972 9.987
AF1215 12 15 15.000 15.018 12.007 12.015 12.000 12.018 11.966 11.984
AF1216 12 16 16.000 16.018 12.007 12.015 12.000 12.018 11.966 11.984
AF1217 12 17 17.000 17.018 12.007 12.015 12.000 12.018 11.966 11.984 Free Bush
AF1218 12 18 18.000 18.018 12.007 12.015 12.000 12.018 11.966 11.984
AF1418 14 18 18.000 18.018 14.007 14.015 14.000 14.018 13.966 13.984
AF1420 14 20 20.000 20.021 14.007 14.015 14.000 14.018 13.966 13.984
AF1519 15 19 19.000 19.021 15.007 15.015 15.000 15.018 14.966 14.984
AF1521 15 21 21.000 21.021 15.007 15.015 15.000 15.018 14.966 14.984
AF1620 16 20 20.000 20.021 16.007 16.015 16.000 16.018 15.966 15.984
AF1622 16 22 22.000 22.021 16.007 16.015 16.000 16.018 15.966 15.984
AF1822 18 22 22.000 22.021 18.007 18.015 18.000 18.018 17.966 17.984
AF1824 18 24 24.000 24.021 18.007 18.015 18.000 18.018 17.966 17.984
AF1825 18 25 25.000 25.021 18.007 18.015 18.000 18.018 17.966 17.984
AF2024 20 24 24.000 24.021 20.008 20.017 20.000 20.021 19.959 19.980
AF2025 20 25 25.000 25.021 20.008 28.017 20.000 20.021 19.959 19.980
AF2026 20 26 26.000 26.021 20.008 20.017 20.000 20.021 19.959 19.960
AF2027 20 27 27.000 27.021 20.008 20.017 20.000 20.021 19.959 19.980
AF2028 20 28 28.000 28.021 20.008 20.017 20.000 20.021 19.959 19.980 Housing
AF2227 22 27 27.000 27.021 22.008 22.017 22.000 22.021 21.959 21.980
AF2228 22 28 28.000 28.021 22.008 22.017 22.000 22.021 21.959 21.980
AF2229 22 29 29.000 29.021 22.008 22.017 22.000 22.021 21.959 21.980
AF2530 25 30 30.000 30.021 25.008 25.017 25.000 25.021 24.959 24.980
AF2532 25 32 32.000 32.025 25.008 25.017 25.000 25.021 24.959 24.980
AF2832 28 32 32.000 32.025 28.008 28.017 28.000 28.021 27.959 27.980
AF2833 28 33 33.000 33.025 28.008 28.017 28.000 28.021 27.959 27.980
AF2836 28 36 36.000 36.025 28.008 28.017 28.000 28.021 27.959 27.980
AF3038 30 38 38.000 38.025 30.008 30.017 30.000 30.021 29.959 29.980
AF3238 32 38 38.000 38.025 32.009 32.020 32.000 32.025 31.950 31.975
AF3240 32 40 40.000 40.025 32.009 32.020 32.000 32.025 31.950 31.975
AF3544 35 44 44.000 44.025 35.009 35.020 35.000 35.025 34.950 34.975
AF3545 35 45 45.000 45.025 35.009 35.020 35.000 35.025 34.950 34.975
AF3642 36 42 42.000 42.025 36.009 36.020 36.000 36.025 35.950 35.975
AF3545 36 45 45.000 45.025 36.009 36.020 36.000 36.025 35.950 35.975
AF3844 38 44 44.000 44.025 38.009 38.020 38.000 38.025 37.950 37.975
AF4046 40 46 46.000 46.025 40.009 40.020 40.000 40.025 39.950 39.975 Fitted Bush Shaft
AF4050 40 50 50.000 50.025 40.009 40.020 40.000 40.025 39.950 39.975
AF4551 45 51 51.000 51.030 45.009 45.020 45.000 45.025 44.950 44.975
AF4555 45 55 55.000 55.030 45.009 45.020 45.000 45.025 44.950 44.975
AF4556 45 56 56.000 56.030 45.009 45.020 45.000 45.025 44.950 44.975
AF5056 50 56 56.000 56.030 50.009 50.020 50.000 50.025 49.950 49.975
AF5060 50 60 60.000 60.030 50.009 50.020 50.000 50.025 49.950 49.975
AF5565 55 65 65.000 65.030 55.011 55.024 55.000 55.030 55.940 54.970
AF6070 60 70 70.000 70.030 60.011 60.024 60.000 60.046 59.940 59.970
AF6072 60 72 72.000 72.030 60.011 60.024 60.000 60.046 59.940 59.970
AF6080 60 80 80.000 80.030 60.011 60.024 60.000 60.046 59.940 59.970
AF6370 63 70 70.000 70.030 63.011 63.024 63.000 63.046 62.940 62.970
Note: For cylindrical bearings of Ø int>60mm housing tolerance H8.

Bowman International Limited reserve the right to change specifications without prior notice E & OE

BOWMAN INTERNATIONAL LIMITED


10 Isis Court, Wyndyke Furlong, Abingdon Business Park, Abingdon, Oxfordshire, OX14 1DZ England 21
Tel +44 (0)1235 462500 Fax +44 (0)1235 462519 E-mail [email protected] Website www.bowman.co.uk
LRQ 0960929
French metric flanged bearings – fitting data
Basic Sizes ØdH (H7) ØDp (m5) Ødf (H7/H8) ØDs (f7)
Part No. Ød ØD Max Min Min Max Min Max Min Max
AG0306 3 6 6.000 6.012 3.002 3.006 3.000 3.014 2.984 2.994
AG0408 4 8 8.000 8.016 4.004 4.009 4.000 4.018 3.978 3.990
AG0610 6 10 10.000 10.015 6.004 6.009 6.000 6.018 5.978 5.990
AG0812 8 12 12.000 12.018 8.006 8.012 8.000 8.022 7.972 7.987
AG0914 9 14 14.000 14.018 9.006 9.012 9.000 9.022 8.972 8.987
AG1013 10 13 13.000Ω 13.018 10.006 10.012 10.000 10.002 9.972 9.987
AG1015 10 15 15.000 15.018 10.006 10.012 10.000 10.022 9.972 9.987
AG1016 10 16 16.000 16.018 10.006 10.012 10.000 10.022 9.972 9.987 Fitting Pin
AG1215 12 15 15.000 15.018 12.007 12.015 12.000 12.027 11.966 11.984
AG1217 12 17 17.000 17.018 12.007 12.015 12.000 12.027 11.966 11.984
AG1218 12 18 18.000 18.018 12.007 12.015 12.000 12.027 11.966 11.984
AG1418 14 18 18.000 18.018 14.007 14.015 14.000 14.027 13.966 13.984
AG1420 14 20 20.000 20.021 14.007 14.015 14.000 14.027 13.966 13.984
AG1519 15 19 19.000 19.021 15.007 15.015 15.000 15.027 14.966 14.984
AG1521 15 21 21.000 21.021 15.007 15.015 15.000 15.027 14.966 14.984
AG1620 16 20 20.000 20.021 16.007 16.015 16.000 16.027 15.966 15.984
AG1622 16 22 22.000 22.021 16.007 16.015 16.000 16.027 15.966 15.984
AG1822 18 22 22.000 22.021 18.007 18.015 18.000 18.027 17.966 17.984
AG1824 18 24 24.000 24.021 18.007 18.015 18.000 18.027 17.966 17.984
AG2024 20 24 24.000 24.021 20.008 20.017 20.000 10.033 19.959 19.980 Free Bush
AG2026 20 26 26.000 26.021 20.008 20.017 20.000 20.033 19.959 19.980
AG2227 22 27 27.000 27.021 22.008 22.017 22.000 22.033 21.959 21.980
AG2228 22 28 28.000 28.021 22.008 22.017 22.000 22.033 21.959 21.980
AG2229 22 29 29.000 29.021 22.008 22.017 22.000 22.033 21.959 21.980
AG2530 25 30 30.000 30.021 25.008 25.017 25.000 25.033 24.959 24.980
AG2532 25 32 32.000 32.025 25.008 25.017 25.000 25.033 24.959 24.980
AG2833 28 33 33.000 33.025 28.008 28.017 28.000 28.033 27.959 27.980
AG2836 28 36 36.000 36.025 28.008 28.017 28.000 28.033 27.959 27.980
AG3038 30 38 38.000 38.025 30.008 30.017 30.000 30.033 29.959 29.980
AG3238 32 38 38.000 38.025 32.009 32.020 32.000 32.039 31.950 31.975
AG3240 32 40 40.000 40.025 32.009 32.020 32.000 32.039 31.950 31.975
AG3242 36 42 42.000 42.025 36.009 36.020 36.000 36.039 35.950 35.975
AG3645 36 45 45.000 45.025 36.009 36.020 36.000 36.039 35.950 35.975
AG4046 40 46 46.000 46.025 40.009 40.020 40.000 40.039 39.950 39.975
AG4050 40 50 50.000 50.025 40.009 40.020 40.000 40.039 39.950 39.975 Housing
AG4551 45 51 51.000 51.030 45.009 45.020 45.000 45.039 44.950 44.975
AG4556 45 56 56.000 56.030 45.009 45.020 45.000 45.039 44.950 44.975
AG5056 50 56 56.000 56.030 50.009 50.020 50.000 50.039 49.950 49.975
AG5060 50 60 56.000 56.030 50.009 50.020 50.000 50.039 49.950 49.975
AG6070 60 70 70.000 70.030 60.011 60.024 60.000 60.046 59.940 59.970
Note: For cylindrical bearings of Ø int>60mm housing tolerance H8.

Fitted Bush Shaft

Bowman International Limited reserve the right to change specifications without prior notice E & OE

BOWMAN INTERNATIONAL LIMITED


22 10 Isis Court, Wyndyke Furlong, Abingdon Business Park, Abingdon, Oxfordshire, OX14 1DZ England
Tel +44 (0)1235 462500 Fax +44 (0)1235 462519 E-mail [email protected] Website www.bowman.co.uk
LRQ 0960929
Inch plain bearings – fitting data
Basic Sizes Ø dH (H8) Ø Dp Ø dF Ø Ds (f7) (except *)
Part Code Ød ØD Min. Max. Min. Max. Min. Max. Tol. Min. Max.
AI 0305 3
⁄16 5
⁄16 0.3125 0.3134 0.1877 0.1879 0.1876 0.1886 0.1866 0.1871
AI 0406 1
⁄4 3
⁄8 0.3750 0.3759 0.2502 0.2504 0.2500 0.2507 H8 0.2489 0.2495
AI 0407 1
⁄4 7
⁄16 0.4375 0.4385 0.2498 0.2500 0.2496 0.2506 0.2484* 0.2490* *e7
AI 0408 1
⁄4 1
⁄2 0.5000 0.5010 0.2502 0.2504 0.2500 0.2504 H8 0.2489 0.2495
AI 0507 5
⁄16 7
⁄16 0.4375 0.4385 0.3127 0.3129 0.3125 0.3133 H8 0.3114 0.3120
AI 0508 5
⁄16 1
⁄2 0.5000 0.5010 0.3127 0.3129 0.3125 0.3131 H8 0.3114 0.3120
AI 0608 3
⁄8 1
⁄2 0.5000 0.5010 0.3752 0.3754 0.3750 0.3754 H8 0.3739 0.3745
Fitting Pin
AI 0610 3
⁄8 5
⁄8 0.6250 0.6260 0.3752 0.3754 0.3750 0.3759 H8 0.3739 0.3745
AI 0709 7
⁄16 9
⁄16 0.5625 0.5635 0.4377 0.4379 0.4375 0.4385 H8 0.4362 0.4369
AI 0711 7
⁄16 11
⁄16 0.6875 0.6885 0.4377 0.4379 0.4375 0.4385 H8 0.4362 0.4369
AI 0810 1
⁄2 5
⁄8 0.6250 0.6260 0.5002 0.5005 0.5000 0.5009 H8 0.4987 0.4994
AI 0811 1
⁄2 11
⁄16 0.6875 0.6885 0.5002 0.5005 0.5000 0.5012 0.4987 0.4994
AI 0812 1
⁄2 3
⁄4 0.7500 0.7512 0.5002 0.5005 0.5000 0.5010 H8 0.4987 0.4994
AI 0911 9
⁄16 11
⁄16 0.6875 0.6885 0.5625 0.5628 0.5625 0.5634 H8 0.5612 0.5619
AI 0912 9
⁄16 3
⁄4 0.7500 0.7512 0.5635 0.5638 0.5633 0.5644 0.5618* 0.5625* *h7
AI 1012 5
⁄8 3
⁄4 0.7500 0.7512 0.6252 0.6255 0.6250 0.6263 0.6237 0.6244
AI 1013 5
⁄8 13
⁄16 0.8125 0.8137 0.6252 0.6255 0.6250 0.6269 0.6237 0.6244 Free Bush
AI 1014 5
⁄8 7
⁄8 0.8750 0.8762 0.6252 0.6255 0.6250 0.6259 H8 0.6237 0.6244
AI 1115 11
⁄16 15
⁄16 0.9375 0.9387 0.6877 0.6880 0.6875 0.6880 H8 0.6892 0.6869
AI 1214 3
⁄4 7
⁄8 0.8750 0.8762 0.7502 0.7505 0.7500 0.7513 0.7484 0.7492
AI 1215 3
⁄4 15
⁄16 0.9375 0.9387 0.7516 0.7519 0.7514 0.7531 0.7499* 0.7508* *k7
AI 1216 3
⁄4 1 1.0000 1.0012 0.7502 0.7505 0.7500 0.7512 H8 0.7484 0.7492
UI 1216 3
⁄4 1 1.0000 1.0012 0.7502 0.7505 0.7500 0.7522 0.7484 0.7492
AI1218 3
⁄4 1 1⁄8 1.1250 1.1262 0.7502 0.7505 0.7500 0.7521 0.7484 0.7492
AI 1220 3
⁄4 1 1⁄4 1.2000 1.2516 0.7502 0.7505 0.7500 0.7520 0.7484 0.7492
AI 1416 7
⁄8 1 1.0000 1.0012 0.8752 0.8755 0.8750 0.8761 H8 0.8737 0.8744
AI 1418 7
⁄8 1 1⁄8 1.1250 1.1262 0.8752 0.8755 0.8750 0.8761 H8 0.8737 0.8744
AI 1618 1 1 1⁄8 1.1250 1.1262 1.0002 1.0006 1.0000 1.0012 H8 0.9984 0.9992
AI 1620 1 1 1⁄4 1.2500 1.2516 1.0002 1.0006 1.0000 1.0012 H8 0.9984 0.9992
AI 1624 1 1 1⁄2 1.5000 1.5016 1.0002 1.0006 1.0000 1.0016 0.9984 0.9992 Housing
AI 1822 1 1⁄8 1 3⁄8 1.3750 1.3766 1.1252 1.1256 1.1250 1.1265 1.1234 1.1244
AI 2024 1 1⁄4 1 1⁄2 1.5000 1.5016 1.2502 1.2506 1.2500 1.2514 H8 1.2480 1.2490
AI 2026 1 1⁄4 1 5⁄8 1.6250 1.6266 1.2502 1.2506 1.2500 1.2526 1.2480 1.2490
AI 2226 1 3⁄8 1 5⁄8 1.6250 1.6266 1.3752 1.3756 1.3750 1.3765 H8 1.3730 1.3740
AI 2228 1 3⁄8 1 3⁄4 1.7500 1.7516 1.3752 1.3756 1.3750 1.3762 H8 1.3730 1.3740
AI 2428 1 ⁄2
1
1 3⁄4 1.7500 1.7516 1.5002 1.5006 1.5000 1.5014 H8 1.4980 1.4990
AI 2430 1 1⁄2 1 7⁄8 1.8750 1.8766 1.5002 1.5006 1.5000 1.5016 H8 1.4980 1.4990
AI 2432 1 1⁄2 2 2.0000 2.0018 1.5002 1.5006 1.5000 1.5025 1.4980 1.4990
AI 2633 1 5⁄8 2 1⁄16 2.0625 2.0643 1.6252 1.6258 1.6250 1.6274 1.6230 1.6240
AI 2832 1 3⁄4 2 2.0000 2.0018 1.7502 1.7508 1.7500 1.7515 H8 1.7480 1.7490
AI 2836 1 3⁄4 2 1⁄4 2.2500 2.2518 1.7502 1.7508 1.7500 1.7515 H8 1.7480 1.7490
AI 3236 2 2 1⁄4 2.2500 2.2518 2.0002 2.0008 2.0000 2.0015 H8 1.9976 1.9988
AI 3240 2 2 1⁄2 2.5000 2.5018 2.0002 2.0008 2.0000 2.0011 H8 1.9976 1.9988 Fitted Bush Shaft
AI 3642 2 1⁄4 2 5⁄8 2.6250 2.6268 2.2502 2.2508 2.2500 2.2536 2.2476 2.2488
AI 3644 2 1⁄4 2 3⁄4 2.7500 2.7518 2.2502 2.2508 2.2500 2.2512 H8 2.2476 2.2488
AI 4048 2 1⁄2 3 3.0000 3.0018 2.5002 2.5008 2.5000 2.5013 H8 2.4976 2.4988
AI 4856 3 3 1⁄2 3.4980 3.5003 2.9957 2.9967 2.9955 2.9986 2.9922* 2.9940* *c8

Bowman International Limited reserve the right to change specifications without prior notice E & OE

BOWMAN INTERNATIONAL LIMITED


10 Isis Court, Wyndyke Furlong, Abingdon Business Park, Abingdon, Oxfordshire, OX14 1DZ England 23
Tel +44 (0)1235 462500 Fax +44 (0)1235 462519 E-mail [email protected] Website www.bowman.co.uk
LRQ 0960929
Inch flanged bearings – fitting data
Basic Sizes Ø dH (H8) Ø Dp Ø dF Ø Ds (f7) (except *)
Part Code Ød ØD Min. Max. Min. Max. Min. Max. Tol. Min. Max.
AJ 0305 3
⁄16 5
⁄16 0.3125 0.3134 0.1877 0.1879 0.1875 0.1883 H8 0.1866 0.1871
AJ 0406 1
⁄4 3
⁄8 0.3750 0.3759 0.2502 0.2504 0.2500 0.2504 H8 0.2489 0.2495
AJ 0508 5
⁄16 1
⁄2 0.5000 0.5010 0.3127 0.3129 0.3125 0.3127 H8 0.3114 0.3120
AJ 0509 5
⁄16 9
⁄16 0.5625 0.5635 0.3116 0.3118 0.3114 0.3121 0.3100* 0.3109* *d8
AJ 0608 3
⁄8 1
⁄2 0.5000 0.5010 0.3752 0.3754 0.3750 0.3756 H8 0.3739 0.3745
UJ 0608 3
⁄8 1
⁄2 0.5000 0.5010 0.3752 0.3754 0.3750 0.3752 H8 0.3739 0.3745
AJ 0609 3
⁄8 9
⁄16 0.5625 0.5635 0.3744 0.3746 0.3742 0.3748 0.3739* 0.3745* *d8 Fitting Pin
AJ 0610 3
⁄8 5
⁄8 0.6250 0.6260 0.3752 0.3754 0.3750 0.3758 H8 0.3739 0.3745
AJ 0709 7
⁄16 9
⁄16 0.5625 0.5635 0.4390 0.4392 0.4388 0.4401 0.4376* 0.4383* *k7
AJ 0810 1
⁄2 5
⁄8 0.6250 0.6260 0.4997 0.4999 0.4995 0.5001 J8 0.4981* 0.4988* *e7
AJ 0812 1
⁄2 3
⁄4 0.7500 0.7512 0.5002 0.5005 0.5000 0.5009 H8 0.4987 0.4994
AJ 1012 5
⁄8 3
⁄4 0.7500 0.7512 0.6266 0.6269 0.6264 0.6275 0.6251* 0.6258* *k7
AJ 1014 5
⁄8 7
⁄8 0.8750 0.8762 0.6252 0.6255 0.6250 0.6259 H8 0.6237 0.6244
AJ 1216 3
⁄4 1 1.0000 1.0012 0.7502 0.7505 0.7500 0.7512 H8 0.7484 0.7492
AJ 1416 7
⁄16 1 1.0000 1.0012 0.8752 0.8755 0.8750 0.8761 H8 0.8737 0.8744
AJ 1418 7
⁄16 1 1⁄8 1.1250 1.1262 0.8752 0.8755 0.8750 0.8761 H8 0.8737 0.8744
AJ 1620 1 1 1⁄4 1.2500 1.2516 1.0002 1.0006 1.0000 1.0012 H8 0.9984 0.9994 Free Bush
UJ 1620 1 1 1⁄4 1.2500 1.2516 1.0007 1.0010 1.0050 1.0017 0.9993* 1.0000* *h7
AJ 1822 1 1⁄8 1 3⁄8 1.3750 1.3766 1.1252 1.1256 1.1250 1.1262 H8 1.1234 1.1244
AJ 2024 1 1⁄4 1 1⁄2 1.5000 1.5016 1.2502 1.2506 1.2500 1.2514 H8 1.2480 1.2490
AJ 2026 1 1⁄4 1 5⁄8 1.6250 1.6266 1.2502 1.2506 1.2500 1.2515 H8 1.2480 1.2490
AJ 2226 1 ⁄8
3
1 5⁄8 1.6250 1.6266 1.3740 1.3744 1.3738 1.3752 1.3720* 1.3730* *e7
AJ 2428 1 1⁄2 1 3⁄4 1.7485 1.7502 1.5012 1.5016 1.5010 1.5020 F8 1.4990* 1.5000* *h7
AJ 2430 1 1⁄2 1 7⁄8 1.8750 1.8766 1.5002 1.5006 1.5000 1.5015 H8 1.4980 1.4990

Inch stock tolerances


Tolerances
Plain Bearings Flanged Bearings
Fitted Bush Shaft
Length: L < 1 ⁄2”± 0.005”
1
Length: L < 11⁄2”± 0.005
L > 11⁄2”< 3”± 0.010” L > 11⁄2”< 3” ±0.010”
Concentricity: Full indicated movement, D with respect Flange thickness e ± 0.003”
to d; Flange diameter D1 ± 0.005”
d < 1⁄2” 0.002” max d< 1⁄2” 0.002” max
d> 1⁄2” <11⁄2” 0.003” max d> 1⁄2” <11⁄2” 0.003” max
d > 11⁄2”0.004” max d< 11⁄2” 0.004” max

Chamfers: 45º chamfers are incorporated on inside and outside diameters at each end of bush.
Chamfer length varies with bush wall thickness and outside diameter.

Radii: Radii varies with bush wall thickness and outside diameter. Contact our Technical Department
for details.

Bowman International Limited reserve the right to change specifications without prior notice E & OE

BOWMAN INTERNATIONAL LIMITED


24 10 Isis Court, Wyndyke Furlong, Abingdon Business Park, Abingdon, Oxfordshire, OX14 1DZ England
Tel +44 (0)1235 462500 Fax +44 (0)1235 462519 E-mail [email protected] Website www.bowman.co.uk
LRQ 0960929

Machining Recommendations for 5°


Sintered Bearings
Machining of self-lubricating bearings should be avoided Internal rough turning
whenever possible in order to maintain the best bearing
properties. When machining is absolutely unavoidable it is
important that the recommendations below are followed. 5°
Machining should be carried out with the bearing
impregnated with oil if possible.
Oilube Bronze, Oilube Ferro Bronze and Graphite Bronze
can be turned. Diamond or carbide tips, quality ISO K 20,
with a tip radius of 0.1/0.2mm max. should be used for
Internal final turning
final turning. Suitable cutting speeds are:- for Oilube
Bronze and Graphite Bronze 100-200 m/min. and for
Ferro Bronze 50-100 m/min. Diamond
It is imperative that the bearings are thoroughly cleaned
after machining to remove any turning debris.
The bearing surface of self-lubricating bearings must not
be ground, as the oil transportation pores are then closed.
The outer surface of the bearing can, however, be
machined in any way required. If external additional Internal final turning

lubrication is used then even the pores on the outside


diameter must be kept open.
Carbide tip
The bearing can be heated on an electrical hot plate after
machining to check that the pores are still open. Oil will
then ooze out of the bearing.
Bearings usually lose oil during the turning operation and
the oil should be replaced before the bearing is used. A External rough or
simple method of doing this is by immersing the bearing final turning
in oil SAE 20 heated to 80 degrees C. The bearing should
be immersed until the oil has cooled. The pores are filled 5°
with the oil by this process and the bearing is then ready
for use.
The edge strength of the Graphite Bronze is rather low
and special care should therefore be taken when turning
end surfaces. When drilling, the bearing should be placed
as shown in the adjoining sketches.

Drilling

BOWMAN INTERNATIONAL LIMITED


10 Isis Court, Wyndyke Furlong, Abingdon Business Park, Abingdon, Oxfordshire, OX14 1DZ England 25
Tel +44 (0)1235 462500 Fax +44 (0)1235 462519 E-mail [email protected] Website www.bowman.co.uk
LRQ 0960929
Inspection Room

Bowmans new inspection room has been equipped with the latest state of the art Mitutoyo
inspection equipment and other supporting equipment.

On the right is the Mitutoyo Coordinate Measuring Machine QM-M 333


This machine is a fast, precise and flexible instrument for making manual 3D measurements.
 Fast, simple menu-based measuring procedures allow workpiece features to be measured directly without
needing to deal with co-ordinates.
 High measuring precision with fast, direct processing of measurement data.
 Unique ‘open space’ design permits easy loading and unloading with obstructed access for the operator.
 Integrated thermal-effect compensation system for instrument and workpiece, effective over the temperature
range 15 to 30˚C.
 Complete with printer
On the left is the Mitutoyo Form Measurement Roundtest Machine RA-114
Compact, stand-alone equipment for precise, effective and easy form measurement. The large, easy to read
display shows measurement results at a glance. Excellent for checking concentricity and roundness.
 Stand-alone machine with built-in processor and display
 Simple manual alignment of workpiece
 Large centring range
 Built-in printer

In the centre is the Mitutoyo Quick Scope


Manual vision system for reliable, non-contact precision measurement. A compact, economical desktop instrument for
uncomplicated measurements of single parts.
 Objective 2.5X as standard
 Power zoom allows for fast and easy magnification change
In addition to supplying inspection equipment, Mitutoyo also offers Bowman comprehensive support and training
delivered by highly skilled engineers, along with a calibration service to ensure that high levels of accuracy are
maintained.
This equipment enables Bowman to maintain their high quality standards.

BOWMAN INTERNATIONAL LIMITED


26 10 Isis Court, Wyndyke Furlong, Abingdon Business Park, Abingdon, Oxfordshire, OX14 1DZ England
Tel +44 (0)1235 462500 Fax +44 (0)1235 462519 E-mail [email protected] Website www.bowman.co.uk
LRQ 0960929
Oilite® Sintered Bearings and Structural Parts
A leading force in precision component manufacturing
For more than 80 years OILITE® has been at the forefront of precision
engineering component manufacture.
OILITE® products range from pump components, sprockets, ABS rings, gears,
exhaust flanges to tooth belt pulleys. Service for the European market is handled
from our headquarters in the United Kingdom.
Innovative problem solving combined with our strong manufacturing and
technical expertise puts us in the best possible position to service our markets.
Our flexible manufacturing approach and technical competence allows for tight
deadlines, competitive pricing and comparatively small volumes as our systems
are designed with our customers most pragmatic needs in mind. Our
organisation is geared so that small volumes aren’t a limiting factor and provide
extremely cost-effective solutions.
Bowman, working in partnership with our customers, deliver the best possible
solutions to suit their needs. Our dedicated design, production, engineering and
sales teams aim is to provide a personal service which will exceed our
customers expectations.

BOWMAN INTERNATIONAL LIMITED


10 Isis Court, Wyndyke Furlong, Abingdon Business Park, Abingdon, Oxfordshire, OX14 1DZ England 27
Tel +44 (0)1235 462500 Fax +44 (0)1235 462519 E-mail [email protected] Website www.bowman.co.uk
LRQ 0960929

All available in our Bearings and Components catalogue

Lubricated Sliding Bearings Dry Sliding Bearings White Metal Bearings

Oil or grease lubricated bearings. Self lubricated plain & flanged White metal bearings can be
Carbon steel shell with sintered bronze bearings & strip. Carbon steel shell manufactured to order in various
layer with a co- acetal polymer layer. with sintered bronze layer filled with material grades.
Available in metric and imperial sizes PTFE. Available in metric and imperial
from stock. sizes from stock.Also bronze shell
versions can be supplied to order.

Standard Wrapped Bearings Ball Bearings Plastic Bearings


Moulded & Machined

Oil or grease lubricated bearings. Ball bearings in chrome or stainless steel. Available in metric sizes from stock. Can
Carbon Steel shell with sintered bronze ABEC 1, 3 or 5. With or without seals. also be manufactured in many different
lining. Various metric and imperial Various ranges available from stock. types of plastic material to suit various
sizes available from stock. applications. Machined for small quantities
and moulded for large quantities.

Cast Bronze Bearings with


Solid Graphite Lubrication Machined Parts CuSn8 Hard Bronze Bearings

Various material specifications are Standard bearings modified. Custom Offered with lubrication pockets,
offered. Standard and special shapes shafts and bearings manufactured in grooves or thru holes. Used for heavy
are available. cast bronze, plastic and other load applications.
materials.

BOWMAN INTERNATIONAL LIMITED


28 10 Isis Court, Wyndyke Furlong, Abingdon Business Park, Abingdon, Oxfordshire, OX14 1DZ England
Tel +44 (0)1235 462500 Fax +44 (0)1235 462519 E-mail [email protected] Website www.bowman.co.uk
LRQ 0960929

Design Logistic support


Bowman can aid your design department in the We offer a next day delivery service on our stock ranges.
application and design of bearings & their associated For OEM and schedule customers we offer JIT, Kan Ban &
components, along with sintered shapes. CAD drawings other tailored delivery plans. We are helping many of our
for components and assemblies can be provided. customers reduce their purchasing & administration costs
by delivering a total bearing and component solution.
Lubrication and re-lubrication
Consolidation
Besides lubricating new production bearings, a
re-lubrication service is offered to our customers. A  One supplier
considerable range of lubricants, for many applications  One purchase order
are stocked and others can be provided to accommodate  One delivery
our customers’ special requirements.  Consolidated invoicing
 One statement
Quality  One monthly payment
Bowman is accredited by LRQA to BS EN 9001-2008.
Website
Certificates of conformity, ISIR’s or PPAP submissions can
Our new comprehensive website gives buyers and
be provided along with material analysis reports,
engineers a quick access to detailed information on all of
produced using our in-house test facilities or at
our stock ranges and services. To further aid designers,
independent laboratories. Bowman is approved by
there is a unique bearing calculator function which gives
several aerospace and military equipment manufacturers
invaluable access to all the design criteria necessary to
as well as the UK ministry of defence. An extensive range
make informed application decisions. This is in addition to
of measuring and testing equipment supports our
our technical expertise that is available for our customers
continuous quality improvement programme.
to call on at any time.
Machining
Exports
Bowman’s in-house machining facility enables rapid
Bowman exports to 26 countries within the EEC and
response to customers requiring modifications to
throughout the rest of the world.
standard bearings across our ranges, or complete
specials. Sample bearings can be produced quickly for
prototype testing using production specification materials
before committing to production tooling. Cast bronze
bearings are also made to order.

Typical machined parts

BOWMAN INTERNATIONAL LIMITED


10 Isis Court, Wyndyke Furlong, Abingdon Business Park, Abingdon, Oxfordshire, OX14 1DZ England 29
Tel +44 (0)1235 462500 Fax +44 (0)1235 462519 E-mail [email protected] Website www.bowman.co.uk
BOWMAN INTERNATIONAL LIMITED
10 Isis Court, Wyndyke Furlong, Abingdon Business Park, Abingdon, Oxfordshire, OX14 1DZ England
Tel +44 (0)1235 462500 Fax +44 (0)1235 462519
E-mail [email protected] Websites www.bowman.co.uk
www.oilitebearings.com (European Customers) www.oilite.com (USA and Canadian Customers)

You might also like