EACH CG MINI PROJECT REPORT WILL

FOLLOW THE FORMAT DESCRIBED:

Order of content in the report to be placed

1) Title Page ( COLOUR SHEET)

Title Page – The title of the report should be selected in such a way that it should
reflect the work carried out by the student. Therefore student should select most
appropriate title for the work carried out during summer internship
2) College Certificate Page ( COLOUR SHEET)
3) Acknowledgement (As per SAMPLE FORMAT – 1)

Acknowledgement: Student should acknowledge the supervisor, organization

and others who have helped for successful completion of the summer internship
(one page).

4) Abstract
5) Table of Contents(As per SAMPLE FORMAT – 2)
List of the contents of the internship report and where they can be found in the
report.
• List of Tables (As per SAMPLE FORMAT –3 )
• List of Figures (As per SAMPLE FORMAT – 4)
• List of Symbols, Abbreviations and Nomenclature (As per SAMPLE
FORMAT – 4)
6) Chapter-1 INTRODUCTION (minimum of 05 pages)
Under this chapter, student should write briefly, about Problem Definition,
Scope and Importance, Software and hardware requirement etc
7) Chapter-2 ABOUT PROJECT TITLE (minimum of 05 pages)
• Under this chapter, about the project
• Literature Survey, ER diagram , Schema diagram etc
8) Chapter-3 METHODOLY AND RESULTS (minimum of 10 pages)
This section contains a discussion of the internship and should address the
• Methodology of project which should be related to the course
done
• Results/observations in the Project.
 • What knowledge is gained and what is achieved in the course.
9) Chapter 5: CONCLUSION and SCOPE FOR FUTURE STUDY (1 page)
• From the work carried out and results obtained, specific
conclusions should be drawn.
• Similarly scope for the further work to be identified and placed
under this heading.

Bibliography (1 page) Include references to books, articles, reports referred to in the

report.

NOTE:
● Project reports should be typed neatly only on one side of the paper with 1.5.
● The margins should be: Left – 1.25″, Right – 1″, Top and Bottom – 0.75″.
● The chapters, sections and subsections may be numbered in the decimal form for
e.g. Chapter 2, sections as 2.1, 2.2 etc., and subsections as 2.2.3, 2.5.1 etc.
The chapter must be left or right justified (font size 16).
● Followed by the title of chapter centered (font size 18), section/subsection
numbers along with their headings must be left justified with section number and
its heading in font size 16 and subsection and its heading in font size 14.
● The body or the text of the report should have font size 12.
● .The figures and tables must be numbered chapter wise for e.g.: Fig. 2.1 Block
diagram of a serial binary adder, Table 3.1 Primitive flow table, etc.
 
● The references should be numbered serially in the order of their occurrence in the
text and their numbers should be indicated within square brackets for e.g. [3]
 SAMPLE FORMAT –1

ACKNOWLEDGEMENT

We dedicate this page to acknowledge and thank those responsible for the shaping of the
project. Without their guidance and help, the experience while constructing the
dissertation would not have been so smooth and efficient.

We sincerely thank Mr. Vijaykumar Dudhanikar, Assistant Professor, Department of

Computer Science and Engineering, for his guidance and valuable suggestions which
helped us to fulfill the Mini Project prescribed by the university.

We owe our profound gratitude to Dr. Antony P J, HOD, Department of Computer

Science & Engineering, whose kind consent and guidance helped us to complete this
work successfully.

We are indebted to our respected Principal, Dr. Shantharama Rai C, and the
management of A J Institute of Engineering and Technology, Laxmi Memorial
Education Trust, Mangalore for having provided all the facilities that helped us in
timely completion of this project report.

We would like to thank all our Computer Science and Engineering teaching and
non-teaching Staff members who have always been with us extending their support,
precious suggestions, guidance and encouragement through the project.

We also like to extend thanks to our friends and family members for their continuous
support.

Mr/Ms. XXXX (USN)

Mr/Ms. YYYY (USN)
 SAMPLE FORMAT –2

TABLE OF CONTENTS

Chapte Title Page No.

r
ACKNOWLEDGEMENT i
ABSTRACT ii
TABLE OF CONTENTS iii
LIST OF FIGURES iv
LIST OF TABLES v
Chapte 1 INTRODUCTION 1-3
r
1. 1
1
1. 2
2
1. 3
3
Chapte 2 ABOUNT THE PROJECT 4-21
r
2. 8
1
2. 12
2
2. 16
3
2. 20
4
Chapte 3 METHODOLOGY AND RESULTS 22-24
r
 3. 22
1
3. 23
2
3. 24
3
Chapte 4 CONCLUSION 25
r
REFERRENCES

SAMPLE FORMAT –3

LIST OF FIGURES

Figur No Title Page No.

e .
Figure 2.1 xyz 11
Figure 2.2 abc 15
Figure 3.1 mno 18

SAMPLE FORMAT –4

LIST OF TABLES

Table No Title Page No.

.
Table 2.1 xyz 10
Table 2.2 abc 14
Table 3.1 mno 22