750HP TURCK MOUNTED DRILLING & WORKOVER RIG

Specification & Auxiliary Equipment

Rig # 2

Tabalino- behind Al-Ahlia University.

Benghazi-Libya.
Tel: +2180913365524 / 0918671262 / 0913971007
Email: [email protected] .
[email protected]

RIG QB-2 TECHNICAL SPECIFICATION

750HP TURCK MOUNTED DRILLING & WORKOVER RIG
Item Equipment Description Qty. Unit
1.
RIG GENERAL SPESCIFICATION:
RIG NAME PLATE: QB#8
MODEL: 750 HP TRUCK MOUNTED, 1 Set
MANUFACTURE: RG- MACHINARY GROUP.
SUITABLE AMBIENT TEMP: -20℃-- +50℃)
HOOK LOAD CAPACITY: 180MT (400,000LBS)
ENGINE RATED POWER: 2 X 540HP (2100R/MIN)
SERVICE DEPTH 2 7/8” EUE (28543ft)
L WORKOVER DEPTH 3 ½” DP (18700ft)
DRILLING DEPTH 5” DP 2500m (08202ft)
DRILLING DEPTH： 4 ½” DP 3000m (09842ft)
RACKING CAPACITY: 12,000 FT (3 ½” DP)
RACKING CAPACITY: 18,000FT (3 1/2" TBG)
MAST HEIGHT(CLEARANCE): 125 FT
DRILL FLOOR HEIGHT: 19.7FT
2. CARRIER, 1 Set
DRIVE TYPE: 14×8, WITH 7 AXELS,
FRONT STEERING: TRIPLE AXELS
REAR STEERING: FOUR AXELS
TRUCK FRAME Model: CJ-01
SYSTEM: SUSPENSION
TIRES, FRONT 445/65R22.5.  6 Each
TIRES, REAR: 445/65R22.5.  8 Each
CABINET: SINGLE PERSON
HYDRAULIC JACK: MODEL Y3030 6 Jacks
TRANSMISSION SHAFT: MODEL CZD
Max. speed (limited） 45km/h
FUEL TANK CAPACITY: 4000 LITERS 1 Tank
3. DRAWWORK: 1 Set
MODEL: JC28/11
MAKE: RG. MACHINERY GROUP
MAIN DRUM: DOUBLE DRUM W/CHAIN DRIVE
HOSTING CAPACITY: 350,000 LBS.
RATED POWER: 750HP /550 KW
Wireline diameter φ32mm（φ11/4＂）
Main drum fast line pull 280kN（62921 lbf）
Clutch model of main drum axial push disc clutch TPQ 330
Auxiliary brake EATON 324
Pull of sand reel: 110kN (24719 lbf)
Sand line diameter: φ14.5mm （ φ9/16＂）
Model of sand reel clutch Axial push clutch TPQ124 ATD 124
4.1. DRAWWORK POWER UNIT

____________________________________________________________________________________
QABER-OUN RIG QB#2 SPECIFICATIONS & AUXILIARY EQUIPMENT Page 2 of 15
Item Equipment Description Qty. Unit
MODEL: C-15 ENGINE 2 SET
MAKE: CATERPILLAR
RATED INPUT POWER 2x540hp/2100r/Min. (Dual engine）
MAX.SPEED: 2100 RPM
4. MAST ASSY: 1 Set
MODEL: JJ18038 JJ18038
TYPE: TWO SECTIONS, TELESCOPING
HEIGHT: 118 FT
LOAD CAPACITY: 180MT (400,000 LBS)
RAISING SYSTEM: RAISING CYLINDER
STANDPIPE: 4" SINGLE STANDPIPES, 5000PSI
Wind Resistance 110 Km/h (No S/B, No hook load)
derrick Inclination angle 3.5°
4.1. TELESCOPIC CYLINDER 2 Sets
8.2. RAISING CYLINDER 2 Sets
5. SUBSTRUCTURE ASSY 1 Set
MODEL: ZZT180 ZZT180
STRUCTURE: PARALLELOGRAM
LOAD CAPACITY: 180 MT (400,000 LBS.)
HIGHT: 19.7 FT
CLEARE HIGHT: 16.1 FT
WORKING AREA: (24 x 20 ft)
6. WORKING FLOOR: 1 Set
TYPE: ADJUSTABLE WORKING FLOOR
DAIMINTION: 10 X 16 FT.
HIGHT: 14 FEET
CLEARE HIGHT: FROM 6 TO 14 FT,
7. MUD PUMP 1 Set
Model: F-500 single action, triplex type
Rated input power: 500HP
Rated pumping speed: 165 s/min.
Stroke: 191mm / 7 ½”
Max working pressure: 5000psi
Pump Diesel engine
Model: CAT C15
Rated speed: 1200r/min
Rated power: 540 HP
8. HOISTING EQUIPMENT
8.1 CROWN BLOCKC 1 Set
MODEL: TC180
LOAD CAPACITY: 180MT (400,000 LBS)
CROWN BLOCK SHEAVES: 5X30 INCHS 5
FAST LINE SHEAVES: 1X36 INCHS 1

____________________________________________________________________________________
QABER-OUN RIG QB#2 SPECIFICATIONS & AUXILIARY EQUIPMENT Page 3 of 15
Item Equipment Description Qty. Unit
8.2. TRAVELING HOOK BLOCK 1 Set
MODEL: YG225（integrative）
LOAD CAPACITY: 500000lb（2250kN）
NUMBER OF SHEAVES 5X36 INCHS 5
DIA. OF SHEAVES: 36”
DIA. OF DRILLING LINE: 1 ¼”
DIA. OF MAIN HOOK: 7 ½”
DIA. OF ASSISTANT HOOK: 6”
LENGTH OF SPRING: 7”
ANGLE OF HOOK BODY: 45 ͦ x 8 = 360 ͦ
8.3 LINKS 2 Pair
Model: DH250
Length: 2700mm
Capacity: 250 Ton
8.4 DRILLING LINE 1 Set
SIZE: 1 ¼”
LENGTH: 3000 FT
8.5 SAND LINE: 1 Set
SIZE: 9/16"
LENGTH: 10,000 FT
9. ROTARY EQUIPMENT
9.1 ROTARY TABLE: 1 Set
MODEL: ZP 275
OPENING: 27 ½”
MAX. STATIC LOAD: 4500KN (450 TON)
MAX.WORKING TORQUE: 27. 5KN.M
DRIVE BOX MODEL: ZX140B, WITH ELEVATED CHAIN
PNEUMATIC SYSTEM: W/AIR COMPRESSOR, DRYER,
HYDRAULIC SYSTEM, 2500PSI, 2X 55GPM,
9.2 SWIVEL 1 Set
MODEL: XSL225
LOAD CAPACITY: 225MT (500,000 LBS)
MAX. WORKING PRESSURE: 5000 PSI
MAX. ROTARY SPEED: 300 R.P.M
INNER DIAMETER: 3”
THREAD OF CNNECTION: 6 5/8” REG
9.3 ROTARY HOSE, 1 Set
SIZE: 3",
WORKING PRESSURE 5000 PSI,
LENGTH: 55 FT
9.4 KELLY 1 Set
SIZE: 3 ½” SQUARE KELLY,
TYPE FRICTION WELDED TYPE

____________________________________________________________________________________
QABER-OUN RIG QB#2 SPECIFICATIONS & AUXILIARY EQUIPMENT Page 4 of 15
Item Equipment Description Qty. Unit
OVERALL LENGTH: 40 FEET
DRIVEN LENGTH: 37 FEET
TOP UPSET JOINT OD:” 7 ¾”
LH CONNECTION: 6 5/8" REG
BOTTOM UPSET OD: 4 1/8”
CONNECTION: NC31 (2 7/8" IF)
BORE SIZE: 1 ¾”
OVERALL LENGTH: 40 FEET
9.5 KELLY BUSHING 1 Set
TYPE: 27 HDP C/W 3 ½” SQ ROLLERS
10. WELL CONTROL SYSTEM
10.1 ANNULAR BOP 1 Set
MODEL: FH 28-35
BORE SIZE: 11 INCHES
WORKING PRESSURE: 5000 PSI W. P
TOP CONNECTION: STUDDED R54 API RING GROOVE
BOTTOM CONNECTION: FLANGED R54 API RING GROOVE
ELEMENT. NATURAL RUBBER ELEMENT.
10.2 DOUBLE RAM BOP 1 Set
MODEL: 2FZ28-35
BORE SIZE: 11"
WORKING PRESSURE: 5000 PSI
TOP CONNECTION: FLANGED R54 RING GROOVE
BOTTOM CONNECTION: FLANGED R54 RING GROOVE
SIDE OUTLETS (4) STUDDED 3-1/8" 5000 PSI
10.3 DRILLING SPOOL 1 Set
BORE SIZE: 11" 11 INCHES
WORKING PRESSURE: 5,000 PSI
TOP CONNECTION FLANGED
BOTTOM CONNECTION FLANGED
SIDE OUTLETS (2) 3 1/8” 5,000 PSI FLANGED
RATED FOR H2S SERVICE YES
BORE SIZE: 11" 11 INCHES
10.4 Rams for BOP
Pipe Rams 11” X 3 ½” 1 Set
Pipe Rams 11 X 2 7/8” 1 Set
Pipe Rams 11 X 2 3/8” 1 Set
Blind Rams 11” CSS Blind Ram 1 Set
10.5 ADAPTORS & FLANGES
Double Stud Adaptor DSA 11”- 5000 X 11” -3000 Psi 1 Set
Double Stud Adaptor DSA 11”- 5000 X 9” 3000 Psi 1 Set
Double Stud Adaptor DSA 11”- 5000 X 7 1/16” 5000 Psi 1 Set
Double Stud Adaptor DSA 11”- 5000 X 7 1/16” 3000 Psi 1 Set

____________________________________________________________________________________
QABER-OUN RIG QB#2 SPECIFICATIONS & AUXILIARY EQUIPMENT Page 5 of 15
Item Equipment Description Qty. Unit
10.6 Test Plug as per API RP-53
test BOP and wellhead up to the specified limit with accessories
10.7 CHOKE MANIFOLD 1 Set
Working pressure: 5,000psi
Main drift diameter: 4- 1/16
Side drift diameter: 2-9/16
Manual choke valve 2-9/16" 1 Valve
Hydraulic choke valve 2-9/16" 1 Valve
Manual lever gate valves, 4- 1/16 5 Valve
Manual lever gate valves, 2-9/16" 4 Valve
10.8 ACCUMULATOR UNIT 1 Set
Type: FKQ480-5
Total volume: 40×16L
Nominal useful volume: 320L - 85 Gallon
Rated working pressure: 21Mpa(3000psi)
Maximum working pressure 31.5Mpa(4568psi)
high pressure hose fire-resistant hose 6x10 Meter
high pressure hose fire-resistant hose (1"×5000psi). 6x15 Meter
Electric driven pump 1 Pump
Pneumatic pumps 3 Pump
11. Hydraulic winches 2 Sets
Model YJ5B 1 Set
Fast line pulling force </= 11000lb (50KN)
System pressure 2000PSI (14MPa)
Model YJ3C 1 Set
Fast line pulling force </= 6700lb (30KN)
System pressure 2000PSI (14MPa)
12. Rig Instrumentation devises 1 Set
ELECTRICAL TYPE RECORDER SENSORS FOR WOB,
ELECTRICAL TYPE RECORDER SENSORS FOR ROTARY TORQUE,
ELECTRICAL TYPE RECORDER SENSORS FOR PUMP SPM,
ELECTRICAL TYPE RECORDER SENSORS FOR PUMP PRESSURE
ELECTRICAL TYPE RECORDER SENSORS FOR ROTARY TABLE RPM.
13. AIR SUPPLY SYSTEM:
SULLAIR AIR COMPRESSOR MODEL: LS12-50HHAC 2 Sets
SULLAIR DRYER: COOLING TYPE MODEL SRC-240
AIR RESERVOIR: MODEL C-2.5/1.0
CAPACITY: 88 C. FT
Rated pressure: 0.85 MPa, 120 Psi
Displacement: 670 L/min
14. ELECTRICAL POWER SUPPLY
14.1 GENERATOR SETS 1 Set
Make & Type Caterpillar Diesel Generator

____________________________________________________________________________________
QABER-OUN RIG QB#2 SPECIFICATIONS & AUXILIARY EQUIPMENT Page 6 of 15
Item Equipment Description Qty. Unit
Model: 3406
Rating Power: 380 KVA
Rating Voltage (220/380) Volts 50/60 Hz
14.2 MCC Room 1 Set
Complete with all circuit breakers, soft starters …
14.3 WELL SITE EX-PROOF CIRCUIT AND LIGHTING 1 Set
Well site lighting system is 220V/50Hz and working voltage of power system is
1 Set
380V/50Hz.
Mast Lights: Bulbs W/ Explosion Proof lights. 7 Sets
Drilling floor Lights: Bulbs W/ Explosion Proof lights. 5 Sets
Main Unit Lights: Bulbs W/ Explosion Proof lights. 2 Sets
15. TANKS
15.1 400 barrels capacity, Mud Tank. 1 Tank
Three (3) compartments 3 Sec.
Mud Tanks Mud jets 3 Jets
Mixing hopper 1 Pcs
400 barrels capacity as spare tank. 1 Tank
15.2 Fuel Tanks 30,000 DIESELTANK AT CAMP SITE. 1 Tank
15.3 Water Tank 30,000 WATER TANK AT CAMP SITE. 1 Tank
16. HANDLING TOOLS & AUXILIARY EQUIPMENT
16.1 TUBING ELEVATORS
Model： DD 3 1/2"/100T； 1 pc
Type: Center latch tubing elevator
Rated load： 100 tons API Spec 8A standard
Model： DD 2 7/8"/80T 1 pc
Rated load： 80 tons; API Spec 8A standard
Type: Center latch tubing elevator
16.2 AIR SLIPS (TUBING SPIDER) 1 Set
MODEL: MKP C- Air operated
RANGE SIZE: 2 3/8” - 5 ½”
RATED CAPACITY: 165,000 LBS
EQUIPPED WITH: FULLSLIP ASSY/LESS CYLINDER
16.3 DRILL COLLAR SLIP 1 pc
Model: DCS-S4 3/4
Size: For 4 3/4" Drill collar
16.4 BREAK OUT RAMS (Tong cylinder) 2 pcs
Stroke: 1620mm (5.3")
Single line Pull: 100KN
16.5 SAFETY CLAMPS 2 pcs
For pipe range: 2 3/8'' – 4 ¾” OD Tubulars
16.6 MANUAL ROTARY TONGS 2 pcs
Type: Type C manual tongs
Rated Load: 35,000 ft. lbs(75KN·m)

____________________________________________________________________________________
QABER-OUN RIG QB#2 SPECIFICATIONS & AUXILIARY EQUIPMENT Page 7 of 15
Item Equipment Description Qty. Unit
Latch lug jaws range: 2 3/8'' – 10 ¾”
16.7 Tubing Power Tong 1 Set
Hydraulic Power Tong W/Back-up
Model: XQ140/12Y
SIZE RANGE: 2- 3/8″～5- ½”
HIGH GEAR TORQUE: 1918FT-LBS@1740PSI
SECOND HIGH TORQUE: 3095FT-LBS@1740PSI
SECOND LOW TORQUE: 5748FT-LBS@1740PSI
LOW GEAR TORQUE: 8851FT-LBS@1740PSI
HIGH GEAR SPEED: 72R/MIN
SECOND HIGH GEAR SPEED: 42R/MIN
SECOND LOW GEAR SPEED: 24R/MIN
LOW GEAR SPEED: 14R/MIN
SYSTEM PRESSURE: 1740PSI
OIL SUPPLY: 32GPM
16.7A Back-up tong： 1 Set
Pipe range： 2 3/8”- 4 ½” pipe body/coupling.
Rated torque: 2580ft.lbs
Opening size: 4 ¾”.
Rated system pressure: 1450 psi.
Max supply: 26.6 G.P.M
16.8 Hydraulic Power Unit 1 Set
MODEL: YZBF120-LD
PRESSURE RATING: 2300 PSI
MAX.PRESSURE: 2800 PSI
FLOW CAPACITY RATING: 120L/MIN
AVAILABLE VOLUM: 580 LITTER
16.9 DRILL COLLARS
Size: 4 3/4’’ OD Spiral Drill collars 8 Joints
Connection: NC-38
Lifting Subs
Equipped With: Elevator groove & slip groove
All cross-over and bit-subs for 4 ¾” D.C
16.10 DRILL COLLARS ELEVATOR:
Size: 4 3/4"center latch DC collar elevator ，
Model ： Model ：DD 4 3/4"/150T；
Rated load： 150 tons; API Spec 8A standard
16.11 SAFETY VALVES
Model: TIW OR EQUIVALENT
Working Pressure: 5000 Psi
Size: 3 ½”, 2 7/8” & 2 3/8” 1 Each
Connection: EUE
17 WELDING EQUIPMENT 1 Set

____________________________________________________________________________________
QABER-OUN RIG QB#2 SPECIFICATIONS & AUXILIARY EQUIPMENT Page 8 of 15
Item Equipment Description Qty. Unit
ADEQUATE QUANTITIES OF WELDING EQUIPMENT INCLUDING OF
WELDING MACHINES ACETYLENE ELECTRODS OXYGEN BOTTLES
18 AIR COMPRESSORS 1 Set
AIR COMPRESSOR FOR AIR LIFTING WATER SOURCE WELL FOR
CONTRACTOR CAMP 15 OR 20 PAR CAPACITY.
19 PIPE RACKS 6 Pcs
Length: 8m
Height: 0.8m
20 Maintenance Workshop 1 EA
Electrician / Mechanic Workshop equipped with all Tools /Equipment
21 HYDRAULIC POWER SWIVEL UNIT 1 Set
MODEL: POWEN 3.5”- 120 TON
MAXIMUM TORQUE: 8,100 FT/LBS
MAXIMUM SPEED: 150 RPM
STATIC LOAD RATING: 120 TONS
DYNAMIC RATING: 65 TONS AND UP TO 81,00 FT/LBS
DRIVE: CAT-C7 Engine
CIRCULATION PASSAGE: 2-1/4" ID
STEM CONNECTION: 3-1/2 IF PIN
SAVER SUB: 3 3-1/2 IF PIN X BOX
ROTARY CONNECTION: 3 3" LINE PIPE
GOOSENECK CONNECTION: 2-1/2" NPT
RATED PRESSURE: 5000 PSI
22 SWAB EQUIPMENT
Swabbing Equipment for 3 ½” & 2 7/8” Tubing included: 1 Set
Hydraulic Oil Saver Hand Pump c/w Handle 1 Each
Rope Socket, 9/16" Line, 1-3/4" OD,3/4" SR Conns. 1 Each
Swivel Sub f/ Rope Socket, 1-3/4" OD, 3/4" SR Conns. 1 Each
Sinker Bar, 10' x 1-3/4" OD w/ 3/4" SR Box x Pin& Fish Neck Pin End 3 Bars
Tubular Jar, 1-5/8" OD, 30" Stroke w/ 3/4" SR Box x Pin Conns 1 Each
Swab Mandrel, 2-7/8" Knuckle Joint 3 Piece w/ 3/4" SR Pin 1 Each
Swab Mandrel, 3-1/2" Knuckle Joint 3 Piece w/ 3/4" SR Pin 1 Each
Sand line Flags As Required
Oil Saver, Type HD Double Stainless-Steel w/ 3" LP Conns. 1500 WP 1 Each
23 E.S.P CABLE SPOOLER
MODEL: RSD/BDSJ15- Y. 1 Set
POWER: HYDRAULIC POWER DRIVE
RATED TORQUE: 7375 LB-FT (0.55- 17.5rpm)
MOTOR POWER: 7.5kw,380v50HZ
HYDRAULIC PRESSUE: 2300 PSI
MAXIMUM LOAD: 12 TONS
24 CHIKSANS
Size Working Pressure Length
1 ½” 5000 Psi 8 Ft. 3 EA
____________________________________________________________________________________
QABER-OUN RIG QB#2 SPECIFICATIONS & AUXILIARY EQUIPMENT Page 9 of 15
Item Equipment Description Qty. Unit
1 ½” 5000 Psi 10 Ft. 5 EA
2” 5000 Psi 10 Ft. 6 EA
4” 5000 Psi 8 Ft. 4 EA
25 Sucker Rod Equipment 1 Set
Sucker rod elevator Size: 3/4",7/8"&1 1/8”
Power tongs: Sucker rod hydraulic power tongs
Sucker rod ram BOP: 4” double EWP 3000 psi
For H2S services Yes
Complete W/ accessories Yes
26 SAFETY AND FIRE FIGHTING EQUIPMENT
H2S PERSONAL DETECTOR 2 EA
MULTI GAS DETECTOR 1 EA
SMOKE DETECTORS As Required
FIRST AID KIT As Required
SAFETY HARNESS 2 EA
SAFETY BELT 1 EA
150 LBS WHEEL MOUNTED POWDER FIRE EXTINGUISHER 1 EA
20 LBS CO2 FIRE EXTINGUISHER @ CAMP & RIG SITE. 10 EA
EA SOCT AIR PACKS 2 EA
BREATHING APPARATUS 3 EA
EYEWASH STATIONS 1 EA
26A Norm Equipment
RADIATION, MEASURING DEVICES As required
CONTAMINATION MEASURING DEVICES As required
DOSE METE DEVICE (FOR PERSONAL RADIATION USE). As required
RADIATION PROTECTIVE CLOTHING As required
27 TRANSPORTATION EQUIPMENT
4WD VEHICLE FOR TOOLPUSHER 1 EA
4WD CREW VEHICLE 1 EA
4WD VEHICLE FOR MECHANIC 1 EA
10 TONS FORKLIFT 966 CAT OR EQUIVELANT. C/W LOADER. 1 EA
28 RIG CAMP ACCOMMODATION
28A MAIN CAMP ACCOMMODATION
A COMPLETE SKID MOUNTED SUITABLE FOR DESERT CONDITION TO
ACCOMMODATE 28 PERSONS CONSISTS OF
Complete
SLEEPING QUARTERS, KITCHEN, FOOD STORAGE, LAUNDRY, FULE
Camp
AND WATER STORAGE AND OTHER NECESSARY EQUIPMENT OF
MAINTAIN A COMPLETE CAMP OPERATIONS.
ONE SINGLE BEDROOM WITH ACCESSORIES FOR CLIENT
1 Room
REPRESENTATIVE USE.
ACCOMMODATION AND MEALS FOR FOUR (4) OPERATOR /THIRD
1 Room
PARTY SERVICES PERSONNEL.
28B RIG SITE CAMP ACCOMMODATION
DOGHOUSE C/W CREW CHANGE ROOM AND SHELFS. 1 Room
ONE OFFICE AT RIG SITE C/W DESK, DESK CHAIR, COMPUTER, 1 Office
____________________________________________________________________________________
QABER-OUN RIG QB#2 SPECIFICATIONS & AUXILIARY EQUIPMENT Page 10 of 15
Item Equipment Description Qty. Unit
PRENTERS & INTERNET ACCESS FOR TOOLPUSHER &
REPRESENTATIVE USE. USE.
29 (A) RIG CREW 12 hrs. per day on SITE
No. RIG CREW On Site CERTIFICATION EXPERIENCE
1. Tool Pusher 1 IWCF (Supervisor) + 10 Years
2. Driller 1 IWCF Driller Level + 5 Years
3. Assistant Driller 1 WELL CAP
4. Derrick Man 1
5. Floor Man 3
6. Rig Mechanic 1
7. Rig Electrician 1
8. Oil field rig welder 1
9. Forklift operator 1 Driving license.
10. Safety Man 1
(B) Camp Crew 12 hrs. per day
No. CAMP CREW ON SITE CERTIFICATION
1. Cooker. 1
All the crew should have certificates on safety and
2. Assistant Cook. 1 Environmental policy, which confirms to national
3. Pastry-cook. 1 laws and international standards applicable in the
4. Kitchen Boy. 1 oil fields IWCF (Supervisor)
5. House Boy. 1
6. Factor laundering 1

 Note:
Contractor Has the Wrights to replace any item of the above Equipment with equivalent or Brand New.

____________________________________________________________________________________
QABER-OUN RIG QB#2 SPECIFICATIONS & AUXILIARY EQUIPMENT Page 11 of 15
____________________________________________________________________________________
QABER-OUN RIG QB#2 SPECIFICATIONS & AUXILIARY EQUIPMENT Page 12 of 15
____________________________________________________________________________________
QABER-OUN RIG QB#2 SPECIFICATIONS & AUXILIARY EQUIPMENT Page 13 of 15
____________________________________________________________________________________
QABER-OUN RIG QB#2 SPECIFICATIONS & AUXILIARY EQUIPMENT Page 14 of 15
____________________________________________________________________________________
QABER-OUN RIG QB#2 SPECIFICATIONS & AUXILIARY EQUIPMENT Page 15 of 15