UK Custom455 - FT038

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

TECHNICAL DATASHEET Custom 455 – 1.

4543 – Xm16 - X3CrNiCuTi 12-9-2


®

FT 038 – Version 0

A precipitation-hardened, martensitic stainless steel that offers exceptional hardness and mechanical strength. It is delivered
in a machinable, solution heat treated state. Given its high mechanical strength to torsion torque, this alloy is particularly
recommended for use in tools subjected to torque.

APPLICATIONS ADVANTAGES

High corrosion resistance


Surgical instruments
Toughness
Chemical, pharmaceutical and food industries
Torque resistance

STANDARDS SHAPES

BAR

WERKSTOFF NR. 1.4543 Diameter


ASTM F899 4.76-63.5 mm
ASTM A564 Length
AMS 5617 3000-3500 mm
NFS 94-090
Tolerance
h9  <30 h11  30.0

➢ CHEMICAL COMPOSITION

% C P Si Ni Cu Nb/Ta Ti Mn S Cr Mo Fe

min 7.50 1.50 0.10 0.80 11.00 residue

max 0.05 0.040 0.50 9.50 2.50 0.50 1.40 0.50 0.030 12.50 0.50
TECHNICAL DATASHEET Custom 455® – 1.4543 – Xm16 - X3CrNiCuTi 12-9-2
FT 038 – Version 0

➢ HEAT TREATMENT

Condition Hardness

Annealed Heated to 815-845°C, rapid cooling 331 HB

Ageing 4 hours at 482°C 49 HRc

➢ MECHANICAL PROPERTIES

Condition Rm Rp0.2 4D Ra Hardness


Tensile Yield elongation (%) HRc
strength strength (%)
(MPa) (MPa)

Solution heat treated 965 793 14 60 31

H900 - 482°C 1724 1689 10 45 49

H950 - 510°C 1620 1551 12 50 48

H1000 - 538°C 1448 1379 14 55 45

H1050 - 566 °C 1310 1207 15 55 40

➢ PHYSICAL PROPERTIES

Density (g/cm³) 7.8

Typical hardness (HRc) 40- 49

Modulus of elasticity at 20°C (N/mm²) 200 x10³

Thermal conductivity at 20°C (W/m °C) 18

Electrical resistance ohm-mm 758 (H950)

Magnetic YES

The information and technical data contained in this sheet are for information purposes only. Only the information written on our material
analysis certificates will be official.

www.acnis-group.com

You might also like