A007 JANKI BROKER 45207210049

CLOUD COMPUTING: PRACTICAL 1

Aim: implementation of virtualization using Hyper-V

2. Check the Hyper-V checkbox

P a g e 1 | 10
A007 JANKI BROKER 45207210049

3. Click OK and then click Restart now and restart the PC

(After then turn on the virtualization from the BIOS)

P a g e 2 | 10
A007 JANKI BROKER 45207210049

5. Now select the connect to server option in the Actions on the right top of the screen as
shown:

6. Select local computer option and click OK

P a g e 3 | 10
A007 JANKI BROKER 45207210049

7. Click on new on the right Actions and click on New and select virtual machine

P a g e 4 | 10
A007 JANKI BROKER 45207210049

8. Click on Next and name your particular file (name_linux) and you can set location if
you want to.

9. Select Generation 1

P a g e 5 | 10
A007 JANKI BROKER 45207210049

10. Now assign memory and set it to 1GB or 1024MB.

11.Now configure the networking and keep it as default switch.

P a g e 6 | 10
A007 JANKI BROKER 45207210049

12. Create virtual hard disk and set size to 10GB

13. Install operating system from bootable CD/DVD-ROM by selecting the .iso file from
your drive on your device.

P a g e 7 | 10
A007 JANKI BROKER 45207210049

14. Now you can see the summary of your new virtual machine. Click on Finish.

15. Here you can see that your virtual machine is created.

P a g e 8 | 10
A007 JANKI BROKER 45207210049

16. Now start your virtual machine by right clicking on it and selecting Start. You’ll see a
small black window on the bottom, click on it.

17. Now you set up Ubuntu

P a g e 9 | 10
A007 JANKI BROKER 45207210049

18. Set your computers name and the password as follows:

19. Once all the installation and setup are done, this is how your Ubuntu environment will
look:

P a g e 10 | 10