This document provides specifications and characteristics for the SKNa 20 avalanche diode. It includes maximum ratings, electrical parameters, thermal properties, mechanical dimensions, and important warnings. The diode has a hermetic metal case and is rated for continuous operation up to 40A and short term overload up to 375A.
This document provides specifications and characteristics for the SKNa 20 avalanche diode. It includes maximum ratings, electrical parameters, thermal properties, mechanical dimensions, and important warnings. The diode has a hermetic metal case and is rated for continuous operation up to 40A and short term overload up to 375A.
This document provides specifications and characteristics for the SKNa 20 avalanche diode. It includes maximum ratings, electrical parameters, thermal properties, mechanical dimensions, and important warnings. The diode has a hermetic metal case and is rated for continuous operation up to 40A and short term overload up to 375A.
This document provides specifications and characteristics for the SKNa 20 avalanche diode. It includes maximum ratings, electrical parameters, thermal properties, mechanical dimensions, and important warnings. The diode has a hermetic metal case and is rated for continuous operation up to 40A and short term overload up to 375A.
V(BR)min IFRMS = 40 A (maximum value for continuous operation)
V IFAV = 20 A (sin. 180; Tc = 93 ºC)
1300 SKNa 20/13
1700 SKNa 20/17
Stud Diode Symbol Condition Values Units
IFAV sin. 180 ; TC = 85 (100) ºC 22 (18) A ID K 9; Ta = 45°C; B2 / B6 17 / 24 A Avalanche Diode K 3; Ta = 45°C; B2 / B6 30 / 42 A
IFSM Tvj = 25º C ; 10 ms 375 A
SKNa 20 Tvj = 150º C ; 10 ms 320 A i2t Tvj = 25º C ; 8,3...10 ms 700 A2s Tvj = 150º C ; 8,3...10 ms 510 A2s
Features VF Tvj = 25º C, IF = 60 A max. 1,55 V
Avalanche type reverse V(TO) Tvj = 150º C max. 0,85 V characteristic up to 1700 rT Tvj = 150º C max. 11 m Hermetic metal case with glass IRD Tvj = 25º C ; VRD = V(BR)min max. 10 mA insulator PRSM Tvj = 150°C, tp = 10 µs 6 kW Anode side threaded stud ISO K/W Rth(j-c) 2 M6x1 K/W Rth(c-s) 1 Cooling via metal plates or Tvj -40...+150 °C heatsinks Tstg -55...+180 °C SKN: Anode to stud Visol - V~ Ms M6 Stud 2 Nm Typical Applications * a 5 * 9,81 m/s2 DC supply for magnets or m approx. 11 g solenoids (brakes, valves, etc.) Field coil supply for DC motors Case E9 Series connections for high voltage applications (dust precipitators)
The specifications of SEMIKRON products may not be considered as gua rantee or assurance of product characteristics ("Beschaffenheitsgarantie"). The specifications of SEMIKRON products describe only the usual characteristics of products to be expected in typical applications, which may still vary depending on the specific a pplication. Therefore, products must be tested for the respective application in advance. Application adjustments may be necessary. The user of SEMIKRON products is responsible for the safety of their applications embedding SEMIKRON products and must take adequate safety measures to prevent the applications from causing a physical injury, fire or other problem if any of SEMIKRON products become faulty. The user is responsible to make sure that the application design is compliant with all applicable laws, regulations, norms and standards. Except as otherwise explicitly approved by SEMIKRON in a written document signed by authorized representatives of SEMIKRON, SEMIKRON products may not be used in any applications where a failure of the product or any consequences of the use thereof can reasonably be expected to result in personal injury. No representation or warranty is given and no liability is assumed with respect to the accuracy, completeness and/or use of any information herein, including without limitation, warranties of non-infringement of intellectual property rights of any third party. SEMIKRON does not assume any liability arising out of the applications or use of any product; neither does it convey any license under its patent rights, copyrights, trade secrets or other intellectual property rights, nor the rights of others. SEMIKRON makes no representation or warranty of non-infringement or alleged noninfringement of intellectual property rights of any third party which may arise from applications. Due to technical requirements our products may contain dangerous substances. For information on the types in question please contact the nearest SEMIKRON sales office. This document supersedes and replaces all information previously supplied and may be supers eded by updates. SEMIKRON reserves the right to make changes.
