1york YHJD 571209 Ytg C 1012

571209-YTG-C-1012
DESCRIPTION
The 13 SEER Series unit is the outdoor part of a versatile cli-
mate system. It i76s designed with a matching indoor coil com-
ponent from Johnson Controls Unitary Products. Available for
typical applications this climate system is supported with acces-
sories and documents to serve specific functions.
FEATURES
TECHNICAL GUIDE • Small Footprint - The compact footprint is a perfect fit for
LX SERIES any application.
• Quality Condenser Coils - The coil is constructed of copper
SPLIT-SYSTEM HEAT PUMPS tubing and enhanced aluminum fins for increased perfor-
13 SEER – R-410A – 1 PHASE mance.
• Coil Protection - Coils are protected from damage by a slot-
1.5 THRU 5 NOMINAL TONS ted, stamped steel coil guard.
MODELS: YHJD18 THRU 60 • Protected Compressor - Compressors are protected inter-
nally by a high pressure relief valve and a temperature sen-
sor, and externally by the system high pressure switch. A
factory installed liquid line filter-drier further protects the com-
pressor against moisture and debris.
• Environmentally Friendly Refrigerant - The next genera-
tion refrigerant R-410A delivers environmentally friendly per-
formance with zero ozone depletion.
• Durable Finish - The cabinet is made of G90-equivalent pre-
painted steel, with special primer formulas and matte cham-
pagne texture to insure less fading when exposed to sun-
light. The coated steel wire fan guard and pre-treated,
galvanized steel chassis components resist corrosion and
rust creep.
• Lower Installed Cost - Installation time and costs are
reduced by easy power and control wiring connections. The
unit is factory charged for a 15-foot lineset. The small base
dimension means less space is required on the ground or
roof.
• Top Discharge - Warm air from the top mounted fan is blown
up, away from the structure and any landscaping. This allows
compact location on multi-unit applications.
• Low Operating Sound Level - The upward air flow carries
the normal operating noise away from the living area. The
® rigid top panel effectively isolates any motor sound. Isolator
mounted compressor and the condenser coil muffle the nor-
mal fan motor and compressor operating sounds.
• Low Maintenance - Long life, permanently lubricated motor-
Due to continuous product improvement, specifications bearings need no annual servicing.
are subject to change without notice.
• Easy Service Access - Fully exposed refrigerant connec-
Visit us on the web at tions and a single panel covering the electrical controls make
www.upgnet.com and www.york.com for easy servicing of the unit.
Additional rating information can be found at • Secured Service Valves - Secured, re-usable service
www.ahridirectory.org valves are provided on both the liquid and vapor sweat con-
nections for ease of evacuating and charging.
WARRANTY SUMMARY* • Agency Listed - Safety certified by CSA to UL 1995 / CSA
Standard 5-Years limited parts warranty. 22.2. Performance certified to ANSI/AHRI Standard 210/240
Standard 10-Years limited compressor warranty. in accordance with the Unitary Small Equipment certification
program.
Extended 10-Years limited parts warranty when product is
registered online within 90 days of purchase for replacement
or closing for new home construction.
*Does not apply to R-22 models, 3-Phase models, or internet sales.
See Limited Warranty certificate in User's Information Manual for details.
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE

571209-YTG-C-1012
Physical and Electrical Data

YHJD18 YHJD24 YHJD30 YHJD36 YHJD42 YHJD48 YHJD60
MODEL
S41S2 S41S4 S41S4 S41S4 S41S4 S41S4 S41S5
Unit Supply Voltage 208-230V, 1 60Hz
Normal Voltage Range 1 187 to 252
Minimum Circuit Ampacity 11.9 11.2 14.1 19.7 20.9 25.6 42.6
2 20 15 20 30 35 45 70
Max. Overcurrent Device Amps
3 15 15 15 20 25 30 45
Min. Overcurrent Device Amps
Compressor Type Scroll Recip Recip Recip Recip Recip Scroll
Rated Load 9.0 8.3 10.6 14.7 15.7 19.4 33.0
Compressor Amps
Locked Rotor 48.0 43.0 54.0 74.0 88.0 88.0 134.0
Crankcase Heater No Yes Yes Yes Yes Yes No
Factory External Discharge Muffler Yes No No No No No Yes
Factory External Check Valve No No No No No No No
HS Kit Required with TXV 4 No Yes Yes Yes Yes Yes* No
Fan Motor Amps Rated Load 0.70 0.80 0.80 1.3 1.3 1.3 1.5
Fan Diameter Inches 24 24 24 24 24 24 24
Rated HP 1/10 1/8 1/8 1/4 1/4 1/4 1/4
Fan Motor Nominal RPM 825 1075 1075 850 850 850 850
Nominal CFM 2000 2900 3000 3800 3800 3600 3550
Face Area Sq. Ft. 15.7 18.3 21.0 23.6 23.6 23.6 23.6
Coil Rows Deep 1 1 1 1 1 2 2
Fins / Inch 22 22 22 22 22 18 18
Liquid Line Set OD (Field Installed) 3/8 3/8 3/8 3/8 3/8 3/8 3/8
Vapor Line Set OD (Field Installed) 3/4 3/4 3/4 3/4 7/8 7/8 1-1/8
Unit Charge (Lbs. - Oz.) 5 6-6 9-6 9-0 10 - 0 9 - 10 14 - 12 15 - 0
Charge Per Foot, Oz. 0.62 0.62 0.62 0.62 0.67 0.67 .76
Operating Weight Lbs. 172 194 206 218 218 285 290
* These models are shipped with a Hard Start Kit installed at the factory.
1. Rated in accordance with AHRI Standard 110-2012, utilization range “A”.
2. Dual element fuses or HACR circuit breaker. Maximum allowable overcurrent protection.
3. Dual element fuses or HACR circuit breaker. Minimum recommended overcurrent protection.
4. See Hard Start Kit Accessory Installation Manual for Hard Start Kit part number for each model.
5. The Unit Charge is correct for the outdoor unit, smallest matched indoor unit, and 15 feet of refrigerant tubing. For tubing lengths other than 15 feet, add or subtract
the amount of refrigerant, using the difference in length multiplied by the per foot value.
Dimensions Refrigerant Connection

Unit (Inches) Service Valve Size
C Model
A B C Liquid Vapor
18 28-1/4 34 34
24 32-1/4 34 34
3/4
30 36-1/4 34 34
36 40-1/4 34 34 3/8
A 42 40-1/4 34 34
7/8
48 40-1/4 34 34
60 40-1/4 34 34 7/8*
* Adapter fitting required for 1-1/8" line set.
All dimensions are in inches and are subject to change without notice.
Overall height is from bottom of base pan to top of fan guard.
B Overall length and width include screw heads.
2 Johnson Controls Unitary Products

571209-YTG-C-1012
System Charge for Various Matched Systems

Outdoor Unit YHJD18S41S2 YHJD24S41S4 YHJD30S41S4 YHJD36S41S4 YHJD42S41S4 YHJD48S41S4 YHJD60S41S5
Required Orifice or TXV 1,2 .051/4F1 .054, .059/4G1 .063/4G1 .071/4H1 .075/4H1 4J1 4K1
Indoor Unit 3,4,5 Additional Charge, Oz

AHE18B .051/ TXV + 0 – – – – – –
AHE24B – .054 / TXV + 0 – – – – –
AHE30B – .054 / TXV + 0 .063 / TXV + 0 – – – –
AHE36C – – .063 / TXV + 25 .071 / TXV + 0 – – –
AHE42D – – – .071 / TXV + 16 – – –
AHE48D – – – – .075 / TXV + 0 TXV + 0 –
AHE60D – – – – – TXV + 25 TXV + 0
AHR18B .051/ TXV + 0 – – – – – –
AHR24B – .054 / TXV + 0 – – – – –
AHR30B – – .063 / TXV + 0 – – – –
AHR36B – – .063 / TXV + 25 .071 / TXV + 6 – – –
AHR42C – – – .071 / TXV + 16 – – –
AHR48D – – – – .075 / TXV + 0 TXV + 0 –
AHR60D – – – – – TXV + 25 TXV + 0
AHV18B .051/ TXV + 0 – – – – – –
AHV24B – .054 / TXV + 0 – – – – –
AHV30B – .054 / TXV + 0 .063 / TXV + 0 – – – –
AHV36C – .059 / TXV + 23 .063 / TXV + 25 .071 / TXV + 6 – – –
AHV42D – – – .071 / TXV + 16 – – –
AHV48D – – – – .075 / TXV + 0 TXV + 0 –
AHV60D – – – – – TXV + 25 TXV + 0
AV*24 .051/ TXV + 3 – – – – – –
AV*36 – .059 / TXV + 23 .063 / TXV + 25 .071 / TXV + 6 – – –
AV*48 – – – – .075 / TXV + 0 TXV + 0 –
AV*60 – – – – .075 / TXV + 0 TXV + 0 –
FC/MC/PC18 .051/ TXV + 0 – – – – – –
FC/MC/PC24 .051/ TXV + 5 – – – – – –
FC/MC/PC30 .051/ TXV + 5 – – – – – –
FC/MC/PC32 – .059 / TXV + 0 .063 / TXV + 0 – – – –
FC/MC/PC35 – .059 / TXV + 0 .063 / TXV + 0 – – – –
FC/MC/PC37 – .059 / TXV + 23 .063 / TXV + 25 .071 / TXV + 6 – – –
FC/MC/PC43 – .059 / TXV + 23 .063 / TXV + 25 .071 / TXV + 6 – – –
FC/MC/PC/UC48 – – – .071 / TXV + 16 – – –
FC/MC/PC/UC60 – – – – .075 / TXV + 0 TXV + 0 –
FC/MC62 – – – – – TXV + 25 TXV + 0
FC64 – – – – – – TXV + 23
UC18 .051/ TXV + 1 – – – – – –
UC24 .051/ TXV + 7 – – – – – –
UC30 .051/ TXV + 7 – – – – – –
UC48 – – – .071 / TXV + 25 – – –
UC60 – – – – .075 / TXV + 2 TXV + 11 –
Some of the combinations shown in the above System Charge table require Advanced Main Air Circulating Fan indoor product. For approved coil
only matches, please see the “COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils” table.
FOOTNOTES:
1. For applications requiring a TXV use S1-1TVM*** series kit.
2. Approved orifice(s) shipped with outdoor unit.
3. Systems matched with furnaces or air handlers not equipped with blower-off delays may require blower Time Delay Kit S1-2FD06700224.
4. PC coils cannot be used in downflow or horizontal applications. FC coils cannot be used in horizontal applications.
5. Refer to Cooling and Heating Performance Data tables for actual performance for specified system matches.
PROCEDURES:
1. Unit factory charge listed on the unit nameplate includes refrigerant for the outdoor unit, the smallest matched indoor unit, and 15 feet of interconnecting line tubing.
2. Verify the TXV or orifice and additional charge required for specific matched indoor unit in the system using the above table.
3. Add additional charge for the amount of interconnecting line tubing greater than 15 feet at the rate specified in Physical and Electrical Data Table.
4. For indoor matches requiring additional charge, the refrigerant needs to be weighed in for specific matched indoor unit and lineset length.
5. Permanently mark the unit nameplate with the total system charge. Total System Charge = Base Charge (as shipped) + charge adder for matched indoor unit +
charge adder for line set.
Johnson Controls Unitary Products 3

571209-YTG-C-1012
COOLING CAPACITY - With Air Handler Coils

AIR HANDLER COOLING
UNIT COIL
RATED NET MBH
MODEL MODEL WIDTH MODEL1 SEER EER
CFM TOTAL SENS.
13 SEER HP WITH AIR HANDLERS
AHE18B 17.5 – 610 18.0 14.6 14.00 12.00
AHR18B 17.5 – 665 18.0 14.9 13.00 11.00
AHV18B 17.5 – 615 18.0 13.2 14.00 12.00
AV*24 17.5 – 610 18.0 13.7 14.50 12.00
MV12B 17.5 FC/MC18B 600 18.0 13.7 14.50 12.00
YHJD18S41S2
MV12B 17.5 FC/MC24B 600 18.0 13.7 14.50 12.00
MV12B 17.5 FC/MC30B 600 18.0 13.7 14.50 12.00
MX12B 17.5 FC/MC18B 585 18.0 14.5 14.50 12.00
MX12B 17.5 FC/MC24B 645 18.0 15.0 14.50 12.00
MX12B 17.5 FC/MC30B 645 18.0 15.0 14.50 12.00
AHE24B 17.5 – 795 24.0 17.4 14.50 12.00
AHE30B 17.5 – 795 24.0 17.4 14.50 12.00
AHR24B 17.5 – 740 24.0 16.9 13.00 11.00
AHV24B 17.5 – 710 24.0 17.0 14.00 12.00
AHV30B 17.5 – 775 24.0 17.6 14.00 12.00
YHJD24S41S4 AHV36C 21.0 – 760 24.0 17.8 14.00 12.00
AV*36 21.0 – 725 24.0 17.0 14.50 12.00
MV12B 17.5 FC/MC35B 800 24.0 17.5 14.50 12.00
MV12B 17.5 FC/MC43B 800 24.0 17.3 14.50 12.00
MX12B 17.5 FC/MC35B 815 24.0 17.6 14.50 12.00
MX12B 17.5 FC/MC43B 735 24.0 17.1 14.50 12.00
AHE30B 17.5 – 985 29.2 21.0 14.00 12.00
AHE36C 21.0 – 1000 29.8 21.8 14.00 12.00
AHR30B 17.5 – 1090 29.2 21.8 13.00 11.00
AHR36B 17.5 – 1060 29.6 21.6 13.00 11.00
AHV30B 17.5 – 1000 29.6 27.0 13.50 11.50
AHV36C 21.0 – 895 29.8 26.6 14.00 12.00
AV*36 21.0 – 960 30.0 22.4 14.50 12.00
YHJD30S41S4 MV12B 17.5 FC/MC35B 1010 30.0 22.0 14.50 12.00
MV12B 17.5 FC/MC43B 1000 30.0 22.2 14.50 12.00
MV16C 21.0 FC/MC35C 1070 30.0 23.0 14.50 12.00
MV16C 21.0 FC/MC43C 1000 30.0 22.2 14.50 12.00
MX12B 17.5 FC/MC35B 1085 29.6 22.2 14.00 12.00
MX12B 17.5 FC/MC43B 1095 29.4 22.6 14.00 12.00
MX16C 21.0 FC/MC35C 1035 29.6 22.2 14.00 12.00
MX16C 21.0 FC/MC43C 970 29.6 21.6 14.00 12.00
AHE36C 21.0 – 1190 35.6 25.7 14.50 12.00
AHE42D 24.5 – 1180 35.6 25.6 14.50 12.00
AHR36B 21.0 – 1245 35.6 26.1 13.00 11.00
AHR42C 21.0 – 1230 35.6 25.8 13.00 11.00
AHV36C 21.0 – 1215 36.0 27.4 14.00 12.00
AHV42D 24.5 – 1180 36.0 27.6 14.50 12.00
AV*36 21.0 – 1190 36.0 26.8 14.50 12.00
YHJD36S41S4 MV12B 17.5 FC/MC43B 1225 36.0 27.2 14.50 12.00
MV12D 24.5 FC/MC48D 1160 36.0 26.6 14.50 12.00
MV16C 21.0 FC/MC43C 1200 36.0 26.8 14.50 12.00
MV16C 21.0 FC/MC48C 1200 36.0 26.6 14.50 12.00
MX12B 17.5 FC/MC43B 1220 35.6 26.0 14.00 12.00
MX12D 24.5 FC/MC48D 1225 35.6 25.7 14.50 12.00
MX16C 21.0 FC/MC43C 1140 35.6 25.5 14.00 12.00
MX16C 21.0 FC/MC48C 1150 35.6 25.6 14.00 12.00
For Notes See Page 5.

571209-YTG-C-1012
COOLING CAPACITY - With Air Handler Coils (Continued)

AIR HANDLER COOLING
UNIT COIL
RATED NET MBH
CFM TOTAL SENS.
AHE48D 24.5 – 1385 40.5 33.2 14.00 12.00
AHR48D 24.5 – 1320 39.5 29.6 13.00 11.00
AHV48D 24.5 – 1300 39.5 30.2 13.75 11.50
AV*48 24.5 – 1385 42.0 32.6 14.50 12.00
YHJD42S41S4 AV*60 24.5 – 1360 42.0 32.6 14.50 12.00
MV16C 21.0 FC60C 1400 40.0 30.0 13.50 11.75
MV20D 24.5 FC/MC60D 1400 42.0 32.4 14.00 12.00
MX16C 21.0 FC60C 1420 41.5 32.2 14.50 12.00
MX20D 24.5 FC/MC60D 1470 41.5 32.2 14.50 12.00
AHE48D 24.5 – 1635 44.0 33.2 14.00 12.00
AHE60D 24.5 – 1565 45.0 34.4 14.50 12.00
AHR48D 24.5 – 1610 43.5 32.8 13.00 11.00
AHR60D 24.5 – 1620 44.0 33.8 13.25 11.35
AHV48D 24.5 – 1585 44.5 33.2 14.50 12.00
AHV60D 24.5 – 1570 44.5 34.0 14.50 12.00
AV*48 24.5 – 1625 45.0 34.4 14.50 12.00
YHJD48S41S4
AV*60 24.5 – 1560 45.0 34.6 14.50 12.00
MV16C 21.0 FC60C 1625 44.5 34.2 14.50 12.00
MV20D 24.5 FC/MC60D 1600 44.5 33.8 14.50 12.00
MV20D 24.5 FC/MC62D 1630 45.5 34.4 14.50 12.00
MX16C 21.0 FC60C 1630 45.0 34.4 14.50 12.00
MX20D 24.5 FC/MC60D 1585 45.5 34.6 14.50 12.00
MX20D 24.5 FC/MC62D 1605 45.0 34.4 14.50 12.00
AHE60D 24.5 – 1950 58.0 41.50 13.00 11.00
AHR60D 24.5 – 1835 58.0 41.00 14.00 12.00
AHV60D 24.5 – 1635 57.5 39.0 13.75 11.80
YHJD60S41S5 MV20D 24.5 FC/MC62D 1855 58.0 41.5 13.75 11.80
MV20D 24.5 FC64D 1855 57.0 43.0 13.25 11.35
MX20D 24.5 FC/MC62D 1795 58.0 41.0 14.00 12.00
MX20D 24.5 FC64D 1795 57.0 42.5 13.75 12.00
Rated in accordance with DOE test procedures (Federal Register 12-27-79 and 3-18-88) and ANSI/AHRI Standard 210/240.
Cooling MBH based on 80 °F entering air temperature, 50% RH (Relative Humidity), and rated air flow.
EER (Energy Efficiency Ratio) is the total cooling output in BTUs at 95 °F outdoor ambient divided by the total electric power in watt-hours at those conditions.
SEER (Seasonal Energy Efficiency Ratio) is the total cooling output in BTUs during a normal annual usage period for cooling divided by the total electric power input in
watt-hours during the same period.
1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number.
— = Not applicable.
MA Modular Air Handlers use Coil Only Ratings.

571209-YTG-C-1012
COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils (Coil Only Ratings)
COIL COOLING
CFM RANGE NET MBH
UNIT MODEL RATED
MODEL WIDTH (Min.-max.) SEER1 EER
CFM TOTAL SENS.
13 SEER HP COIL ONLY RATINGS
FC/MC/PC18 14.5,17.5 450 - 750 600 18.0 14.0 13.00 11.00
FC/MC/PC24 14.5,17.5 450 - 750 600 18.0 14.0 13.50 11.00
YHJD18S41S2 FC/MC/PC30 14.5,17.5 450 - 750 600 18.0 13.7 13.00 11.00
UC24 14.5,17.5 450 - 750 600 18.0 13.8 13.05 11.00
UC30 14.5,17.5 450 - 750 600 18.0 13.8 13.05 11.00
FC/MC/PC32 14.5 600 - 1000 800 23.8 17.1 13.00 11.00
FC/MC/PC35 17.5,21.0 600 - 1000 800 23.6 17.1 13.00 11.00
YHJD24S41S4
FC/MC/PC37 14.5 600 - 1000 800 24.0 17.3 13.00 11.00
FC/MC/PC43 17.5,21.0 600 - 1000 800 24.0 17.3 13.00 11.00
FC/MC/PC32 14.5 800 - 1200 1000 29.8 21.8 13.00 11.00
FC/MC/PC35 17.5,21.0 800 - 1200 1000 29.8 21.8 13.00 11.00
YHJD30S41S4
FC/MC/PC37 14.5 800 - 1200 1000 30.0 22.2 13.00 11.00
FC/MC/PC43 17.5,21.0 800 - 1200 1000 30.0 22.2 13.00 11.00
FC/MC/PC37 14.5 1000 - 1400 1200 36.0 26.8 13.00 11.00
FC/MC/PC43 17.5,21.0 1000 - 1400 1200 36.0 26.6 13.00 11.00
YHJD36S41S4
FC/MC/PC48 21.0,24.5 1000 - 1400 1200 36.0 26.6 13.00 11.00
UC48 21.0,24.5 1000 - 1400 1200 36.0 26.8 13.00 11.00
FC/MC/PC60 21.0,24.5 1200 - 1600 1400 41.0 31.8 13.00 11.00
YHJD42S41S4
UC60 21.0,24.5 1200 - 1600 1400 40.5 31.0 13.00 11.00
FC/MC/PC60 21.0,24.5 1400 - 1800 1600 44.0 33.4 13.00 11.00
YHJD48S41S4 FC/MC62 24.5 1400 - 1800 1600 44.5 33.8 13.00 11.00
UC60 21.0,24.5 1400 - 1800 1600 44.0 32.8 13.00 11.00
FC/MC62 24.5 1600 - 2000 1800 57.5 41.0 13.25 11.35
YHJD60S41S5
FC64 24.5 1600 - 2000 1800 56.5 42.5 13.00 11.00
1. Requires a S1-2FD06700224 Blower Time Delay unless a standard furnace is equipped with one.
PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings.
COOLING CAPACITY - With High Efficiency Motor Furnaces

FURNACE COOLING
UNIT COIL
RATED Net MBH
CFM TOTAL SENS.
13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES2
T*(8,L)V*A12 14.5 FC/MC/PC18A 620 18.0 12.3 14.50 12.30
T*(8,L)V*A12 14.5 FC/MC/PC24A 640 18.0 12.7 14.80 12.50
T*(8,L)V*A12 14.5 FC/MC/PC30A 640 18.0 12.7 14.80 12.50
T*(8,L)V*A12 14.5 UC18A 620 18.0 12.4 14.60 12.30
T*(8,L)V*A12 14.5 UC24A 640 18.0 12.8 14.80 12.50
T*(8,L)V*A12 14.5 UC30A 640 18.0 12.8 14.80 12.50
T*(8,L)V*B12 14.5 FC/MC/PC18A 620 18.0 12.3 14.50 12.30
T*(8,L)V*B12 17.5 FC/MC/PC24B 575 18.0 12.2 14.90 12.60
YHJD18S41S2
T*(8,L)V*B12 17.5 FC/MC/PC30B 575 18.0 12.2 14.90 12.60
T*(8,L)V*B12 17.5 UC18B 580 18.0 12.0 14.60 12.30
T*(8,L)V*B12 17.5 UC24B 575 18.0 12.3 14.90 12.60
T*(8,L)V*B12 17.5 UC30B 575 18.0 12.3 15.00 12.60
T*(8,L)X*A12 14.5 FC/MC/PC18A 540 18.0 14.3 14.00 12.00
T*(8,L)X*A12 14.5 FC/MC/PC24A 595 18.0 14.9 14.00 12.00
T*(8,L)X*A12 14.5 FC/MC/PC30A 595 18.0 14.9 14.00 12.00
T*(8,L)X*A12 14.5 UC18B 590 18.0 13.9 14.50 12.00

571209-YTG-C-1012
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)

FURNACE COOLING
UNIT COIL
RATED Net MBH
CFM TOTAL SENS.
T*(8,L)X*A12 14.5 UC24B 570 18.0 14.1 14.50 12.00
T*(8,L)X*A12 14.5 UC30B 570 18.0 14.1 14.50 12.00
T*(8,L)X*B12 17.5 FC/MC/PC18B 580 18.0 14.6 14.00 12.00
T*(8,L)X*B12 17.5 FC/MC/PC24B 620 18.0 14.9 14.00 12.00
T*(8,L)X*B12 17.5 FC/MC/PC30B 620 18.0 14.9 14.00 12.00
T*(8,L)X*B12 17.5 UC18B 595 18.0 13.9 14.50 12.00
T*(8,L)X*B12 17.5 UC24B 575 18.0 14.2 14.50 12.00
T*(8,L)X*B12 17.5 UC30B 575 18.0 14.2 14.50 12.00
T*9V*A10 17.5 FC/MC/PC18A 580 18.0 13.6 14.00 12.00
T*9V*A10 17.5 FC/MC/PC24A 575 18.0 14.0 14.00 12.00
T*9V*A10 17.5 FC/MC/PC30A 575 18.0 14.0 14.00 12.00
T*9(C,V)*B12 17.5 FC/MC/PC18B 610 18.0 12.2 14.60 12.40
T*9(C,V)*B12 17.5 FC/MC/PC24B 610 18.0 12.7 14.90 12.60
T*9(C,V)*B12 17.5 FC/MC/PC30B 610 18.0 12.7 14.90 12.60
T*9(C,V)*B12 17.5 UC18B 610 18.0 12.3 14.80 12.40
T*9(C,V)*B12 17.5 UC24B 610 18.0 12.8 14.90 12.60
T*9(C,V)*B12 17.5 UC30B 610 18.0 12.8 15.00 12.60
T*9X*A10 14.5 FC/MC/PC18A 575 18.3 13.7 14.00 12.00
T*9X*A10 14.5 FC/MC/PC24A 595 18.7 14.1 14.00 12.00
T*9X*A10 14.5 FC/MC/PC30A 595 18.7 14.1 14.00 12.00
T*9X*B12 17.5 FC/MC/PC18B 590 18.0 14.7 14.00 12.00
T*9X*B12 17.5 FC/MC/PC24B 615 18.0 14.9 14.00 12.00
YHJD18S41S2
T*9X*B12 17.5 FC/MC/PC30B 615 18.0 14.9 14.00 12.00
T*9X*B12 17.5 UC18B 17 590.0 18.5 13.90 14.50
T*9X*B12 17.5 UC24B 17 615.0 18.9 14.20 14.50
T*9X*B12 17.5 UC30B 17 615.0 18.9 14.20 14.50
Y*(8,L)C*A12 14.5 FC/MC/PC18A 620 18.0 12.3 14.50 12.30
Y*(8,L)C*A12 14.5 FC/MC/PC24A 640 18.0 12.7 14.80 12.50
Y*(8,L)C*A12 14.5 FC/MC/PC30A 640 18.0 12.7 14.80 12.50
Y*(8,L)C*A12 14.5 UC18A 620 18.0 12.4 14.60 12.30
Y*(8,L)C*A12 14.5 UC24A 640 18.0 12.8 14.80 12.50
Y*(8,L)C*A12 14.5 UC30A 640 18.0 12.8 14.80 12.50
Y*(8,L)C*B12 14.5 FC/MC/PC18A 620 18.0 12.3 14.50 12.30
Y*(8,L)C*B12 17.5 FC/MC/PC24B 575 18.0 12.2 14.90 12.60
Y*(8,L)C*B12 17.5 FC/MC/PC30B 575 18.0 12.2 14.90 12.60
Y*(8,L)C*B12 17.5 UC18B 580 18.0 12.0 14.60 12.30
Y*(8,L)C*B12 17.5 UC24B 575 18.0 12.3 14.90 12.60
Y*(8,L)C*B12 17.5 UC30B 575 18.0 12.3 15.00 12.60
Y*9C*B12 17.5 FC/MC/PC18B 610 18.0 12.2 14.60 12.40
Y*9C*B12 17.5 FC/MC/PC24B 610 18.0 12.7 14.90 12.60
Y*9C*B12 17.5 FC/MC/PC30B 610 18.0 12.7 14.90 12.60
Y*9C*B12 17.5 UC18B 610 18.0 12.3 14.80 12.40
Y*9C*B12 17.5 UC24B 610 18.0 12.8 14.90 12.60
Y*9C*B12 17.5 UC30B 610 18.0 12.8 15.00 12.60

571209-YTG-C-1012

FURNACE COOLING
UNIT COIL
RATED Net MBH
CFM TOTAL SENS.
T*(8,L)V*A12 14.5 FC/MC/PC32A 775 24.0 17.2 14.00 12.00
T*(8,L)V*A12 14.5 FC/MC/PC37A 805 24.0 17.3 14.50 12.00
T*(8,L)V*B12 17.5 FC/MC/PC35B 760 24.0 17.2 14.00 12.00
T*(8,L)V*B12 17.5 FC/MC/PC43B 760 24.0 17.2 14.00 12.00
T*(8,L)V*C16 21.0 FC/MC/PC35C 855 24.0 17.6 14.50 12.00
T*(8,L)V*C16 21.0 FC/MC/PC43C 895 24.0 18.1 14.50 12.00
T*(8,L)V*C20 21.0 FC/MC/PC35C 740 24.0 17.0 14.50 12.00
T*(8,L)V*C20 21.0 FC/MC/PC43C 760 24.0 17.2 14.50 12.00
T*(8,L)X*A12 14.5 FC/MC/PC32A 800 24.0 17.5 14.50 12.00
T*(8,L)X*A12 14.5 FC/MC/PC37A 840 24.0 17.8 14.50 12.00
T*(8,L)X*B12 17.5 FC/MC/PC35B 850 24.0 17.6 14.50 12.00
T*(8,L)X*B12 17.5 FC/MC/PC43B 865 24.0 18.0 14.50 12.00
T*(8,L)X*C16 21.0 FC/MC/PC35C 865 24.0 17.6 14.50 12.00
T*(8,L)X*C16 21.0 FC/MC/PC43C 855 24.0 17.9 14.50 12.00
T*(8,L)X*C20 21.0 FC/MC/PC35C 885 24.0 17.6 14.50 12.00
T*(8,L)X*C20 21.0 FC/MC/PC43C 815 24.0 17.3 14.50 12.00
T*9V*A10 14.5 FC/MC/PC32A 785 24.0 18.0 13.75 12.00
T*9V*A10 14.5 FC/MC/PC37A 790 24.0 18.4 13.85 12.00
T*9(C,V)*B12 17.5 FC/MC/PC35B 815 24.0 17.6 14.00 12.00
T*9(C,V)*B12 17.5 FC/MC/PC43B 800 24.0 17.3 14.50 12.00
T*9(C,V)*C16 21.0 FC/MC/PC35C 900 24.0 18.1 14.50 12.00
T*9(C,V)*C16 21.0 FC/MC/PC43C 810 24.0 17.3 14.50 12.00
T*9(C,V)*C20 21.0 FC/MC/PC35C 755 24.0 17.2 14.50 12.00
YHJD24S41S4
T*9(C,V)*C20 21.0 FC/MC/PC43C 890 24.0 18.1 14.50 12.00
T*9X*A10 14.5 FC/MC/PC32A 745 24.0 17.6 13.75 12.00
T*9X*A10 14.5 FC/MC/PC37A 740 24.0 17.7 14.00 12.00
T*9X*B12 17.5 FC/MC/PC35B 785 24.0 17.4 14.50 12.00
T*9X*B12 17.5 FC/MC/PC43B 800 24.0 17.3 14.50 12.00
T*9X*C16 21.0 FC/MC/PC35C 765 24.0 17.3 14.50 12.00
T*9X*C16 21.0 FC/MC/PC43C 785 24.0 17.3 14.50 12.00
T*9X*C20 21.0 FC/MC/PC35C 825 24.0 17.6 14.50 12.00
T*9X*C20 21.0 FC/MC/PC43C 790 24.0 17.3 14.50 12.00
Y*(8,L)C*A12 14.5 FC/MC/PC32A 775 24.0 17.2 14.00 12.00
Y*(8,L)C*A12 14.5 FC/MC/PC37A 805 24.0 17.3 14.50 12.00
Y*(8,L)C*B12 17.5 FC/MC/PC35B 760 24.0 17.2 14.00 12.00
Y*(8,L)C*B12 17.5 FC/MC/PC43B 760 24.0 17.2 14.00 12.00
Y*(8,L)C*C16 21.0 FC/MC/PC35C 855 24.0 17.6 14.50 12.00
Y*(8,L)C*C16 21.0 FC/MC/PC43C 895 24.0 18.1 14.50 12.00
Y*(8,L)C*C20 21.0 FC/MC/PC35C 740 24.0 17.0 14.50 12.00
Y*(8,L)C*C20 21.0 FC/MC/PC43C 760 24.0 17.2 14.50 12.00
Y*9C*B12 17.5 FC/MC/PC35B 815 24.0 17.6 14.00 12.00
Y*9C*B12 17.5 FC/MC/PC43B 800 24.0 17.3 14.50 12.00
Y*9C*C16 21.0 FC/MC/PC35C 900 24.0 18.1 14.50 12.00
Y*9C*C16 21.0 FC/MC/PC43C 810 24.0 17.3 14.50 12.00
Y*9C*C20 21.0 FC/MC/PC35C 755 24.0 17.2 14.50 12.00
Y*9C*C20 21.0 FC/MC/PC43C 890 24.0 18.1 14.50 12.00

571209-YTG-C-1012

FURNACE COOLING
UNIT COIL
RATED Net MBH
CFM TOTAL SENS.
T*(8,L)V*A12 14.5 FC/MC/PC32A 1045 30.0 22.0 13.50 11.00
T*(8,L)V*A12 14.5 FC/MC/PC37A 950 30.0 22.0 14.50 12.00
T*(8,L)V*B12 17.5 FC/MC/PC35B 995 30.0 22.0 14.50 12.00
T*(8,L)V*B12 17.5 FC/MC/PC43B 1040 30.0 22.8 14.50 12.00
T*(8,L)V*C16 21.0 FC/MC/PC35C 1025 30.0 22.0 14.50 12.00
T*(8,L)V*C16 21.0 FC/MC/PC43C 990 30.0 22.2 14.50 12.00
T*(8,L)V*C20 21.0 FC/MC/PC35C 1080 30.0 23.0 14.50 12.00
T*(8,L)V*C20 21.0 FC/MC/PC43C 1000 30.0 22.2 14.50 12.00
T*(8,L)X*A12 14.5 FC/MC/PC32A 970 30.0 22.0 14.00 12.00
T*(8,L)X*A12 14.5 FC/MC/PC37A 1105 30.0 23.2 14.50 12.00
T*(8,L)X*B12 17.5 FC/MC/PC35B 1120 30.0 23.2 14.50 12.00
T*(8,L)X*B12 17.5 FC/MC/PC43B 1125 30.0 23.4 14.50 12.00
T*(8,L)X*C16 21.0 FC/MC/PC35C 1105 30.0 23.2 14.50 12.00
T*(8,L)X*C16 21.0 FC/MC/PC43C 955 30.0 22.2 14.50 12.00
T*(8,L)X*C20 21.0 FC/MC/PC35C 850 29.8 21.4 14.50 12.00
T*(8,L)X*C20 21.0 FC/MC/PC43C 870 30.0 21.6 14.50 12.00
T*9(C,V)*B12 17.5 FC/MC/PC35B 1045 30.0 22.0 14.00 11.50
T*9(C,V)*B12 17.5 FC/MC/PC43B 1035 30.0 22.2 14.50 12.00
T*9(C,V)*C16 21.0 FC/MC/PC35C 1005 30.0 22.0 14.50 12.00
T*9(C,V)*C16 21.0 FC/MC/PC43C 1030 30.0 22.2 14.50 12.00
T*9(C,V)*C20 21.0 FC/MC/PC35C 985 30.0 22.0 14.50 12.00
YHJD30S41S4
T*9(C,V)*C20 21.0 FC/MC/PC43C 995 30.0 22.2 14.50 12.00
T*9X*B12 17.5 FC/MC/PC35B 1085 30.0 23.0 14.50 12.00
T*9X*B12 17.5 FC/MC/PC43B 1095 30.0 23.2 14.50 12.00
T*9X*C16 21.0 FC/MC/PC35C 1075 30.0 23.0 14.50 12.00
T*9X*C16 21.0 FC/MC/PC43C 1055 30.0 22.8 14.50 12.00
T*9X*C20 21.0 FC/MC/PC35C 835 29.8 21.2 14.50 12.00
T*9X*C20 21.0 FC/MC/PC43C 720 29.2 19.9 14.50 12.00
Y*(8,L)C*A12 14.5 FC/MC/PC32A 1045 30.0 22.0 13.50 11.00
Y*(8,L)C*A12 14.5 FC/MC/PC37A 950 30.0 22.0 14.50 12.00
Y*(8,L)C*B12 17.5 FC/MC/PC35B 995 30.0 22.0 14.50 12.00
Y*(8,L)C*B12 17.5 FC/MC/PC43B 1040 30.0 22.8 14.50 12.00
Y*(8,L)C*C16 21.0 FC/MC/PC35C 1025 30.0 22.0 14.50 12.00
Y*(8,L)C*C16 21.0 FC/MC/PC43C 990 30.0 22.2 14.50 12.00
Y*(8,L)C*C20 21.0 FC/MC/PC35C 1080 30.0 23.0 14.50 12.00
Y*(8,L)C*C20 21.0 FC/MC/PC43C 1000 30.0 22.2 14.50 12.00
Y*9C*B12 17.5 FC/MC/PC35B 1045 30.0 22.0 14.00 11.50
Y*9C*B12 17.5 FC/MC/PC43B 1035 30.0 22.2 14.50 12.00
Y*9C*C16 21.0 FC/MC/PC35C 1005 30.0 22.0 14.50 12.00
Y*9C*C16 21.0 FC/MC/PC43C 1030 30.0 22.2 14.50 12.00
Y*9C*C20 21.0 FC/MC/PC35C 985 30.0 22.0 14.50 12.00
Y*9C*C20 21.0 FC/MC/PC43C 995 30.0 22.2 14.50 12.00
T*(8,L)V*A12 14.5 FC/MC/PC37A 1150 36.0 26.4 13.75 11.50
T*(8,L)V*B12 17.5 FC/MC/PC43B 1270 36.0 27.2 13.75 11.50
T*(8,L)V*C16 21.0 FC/MC/PC43C 1205 36.0 26.8 14.50 12.00
YHJD36S41S4
T*(8,L)V*C16 21.0 FC/MC/PC48C 1210 36.0 26.6 14.50 12.00
T*(8,L)V*C16 21.0 UC48C 1210 36.0 26.8 14.50 12.00
T*(8,L)V*C20 21.0 FC/MC/PC43C 1190 36.0 26.8 14.50 12.00

571209-YTG-C-1012

FURNACE COOLING
UNIT COIL
RATED Net MBH
CFM TOTAL SENS.
T*(8,L)V*C20 21.0 FC/MC/PC48C 1155 36.0 26.6 14.50 12.00
T*(8,L)V*C20 21.0 UC48C 1155 36.0 26.8 14.50 12.00
T*(8,L)X*A12 14.5 FC/MC/PC37A 1290 36.0 27.6 14.50 12.00
T*(8,L)X*B12 17.5 FC/MC/PC43B 1300 36.0 27.6 14.50 12.00
T*(8,L)X*C16 21.0 FC/MC/PC43C 1175 36.0 26.8 14.50 12.00
T*(8,L)X*C16 21.0 FC/MC/PC48C 1185 36.0 26.6 14.50 12.00
T*(8,L)X*C16 21.0 UC48C 1185 36.0 26.8 14.50 12.00
T*(8,L)X*C20 21.0 FC/MC/PC43C 1250 36.0 27.4 14.50 12.00
T*(8,L)X*C20 21.0 FC/MC/PC48C 1270 36.0 27.2 14.50 12.00
T*(8,L)X*C20 21.0 UC48C 1270 36.0 27.4 14.50 12.00
T*9(C,V)*B12 17.5 FC/MC/PC43B 1200 36.0 26.8 14.00 11.50
T*9(C,V)*C16 21.0 FC/MC/PC43C 1240 36.0 27.0 14.00 12.00
T*9(C,V)*C16 21.0 FC/MC/PC48C 1195 36.0 26.6 14.50 12.00
T*9(C,V)*C16 21.0 UC48C 1195 36.0 26.8 14.50 12.00
T*9(C,V)*C20 21.0 FC/MC/PC43C 1200 36.0 26.8 14.50 12.00
T*9(C,V)*C20 21.0 FC/MC/PC48C 1330 36.0 27.6 14.50 12.00
T*9(C,V)*C20 21.0 UC48C 1330 36.0 27.8 14.50 12.00
T*9(C,V)*D20 24.5 FC/MC/PC48D 1240 36.0 26.6 14.50 12.00
T*9(C,V)*D20 24.5 UC48D 1240 36.0 26.8 14.50 12.00
T*9X*B12 17.5 FC/MC/PC43B 1270 36.0 27.4 14.50 12.00
T*9X*C16 21.0 FC/MC/PC43C 1260 36.0 27.4 14.50 12.00
T*9X*C16 21.0 FC/MC/PC48C 1280 36.0 27.2 14.50 12.00
YHJD36S41S4 T*9X*C16 21.0 UC48C 1280 36.0 27.4 14.50 12.00
T*9X*C20 21.0 FC/MC/PC43C 1185 36.0 26.8 14.50 12.00
T*9X*C20 21.0 FC/MC/PC48C 1205 36.0 26.6 14.50 12.00
T*9X*C20 21.0 UC48C 1205 36.0 26.8 14.50 12.00
T*9X*D20 24.5 FC/MC/PC48D 1240 36.0 26.6 14.50 12.00
T*9X*D20 24.5 UC48D 1240 36.0 26.8 14.50 12.00
Y*(8,L)C*A12 14.5 FC/MC/PC37A 1150 36.0 26.4 13.75 11.50
Y*(8,L)C*B12 17.5 FC/MC/PC43B 1270 36.0 27.2 13.75 11.50
Y*(8,L)C*C16 21.0 FC/MC/PC43C 1205 36.0 26.8 14.50 12.00
Y*(8,L)C*C16 21.0 FC/MC/PC48C 1210 36.0 26.6 14.50 12.00
Y*(8,L)C*C16 21.0 UC48C 1210 36.0 26.8 14.50 12.00
Y*(8,L)C*C20 21.0 FC/MC/PC43C 1190 36.0 26.8 14.50 12.00
Y*(8,L)C*C20 21.0 FC/MC/PC48C 1155 36.0 26.6 14.50 12.00
Y*(8,L)C*C20 21.0 UC48C 1155 36.0 26.8 14.50 12.00
Y*9C*B12 17.5 FC/MC/PC43B 1200 36.0 26.8 14.00 11.50
Y*9C*C16 21.0 FC/MC/PC43C 1240 36.0 27.0 14.00 12.00
Y*9C*C16 21.0 FC/MC/PC48C 1195 36.0 26.6 14.50 12.00
Y*9C*C16 21.0 UC48C 1195 36.0 26.8 14.50 12.00
Y*9C*C20 21.0 FC/MC/PC43C 1200 36.0 26.8 14.50 12.00
Y*9C*C20 21.0 FC/MC/PC48C 1330 36.0 27.6 14.50 12.00
Y*9C*C20 21.0 UC48C 1330 36.0 27.8 14.50 12.00
Y*9C*D20 24.5 FC/MC/PC48D 1240 36.0 26.6 14.50 12.00
Y*9C*D20 24.5 UC48D 1240 36.0 26.8 14.50 12.00

571209-YTG-C-1012

FURNACE COOLING
UNIT COIL
RATED Net MBH
CFM TOTAL SENS.
T*(8,L)V*C16 21.0 FC/PC60C 1420 41.5 32.2 14.00 12.00
T*(8,L)V*C16 21.0 UC60C 1420 41.0 31.4 13.75 11.50
T*(8,L)V*C20 21.0 FC/PC60C 1410 42.0 32.4 14.00 12.00
T*(8,L)V*C20 21.0 UC60C 1410 41.0 31.4 14.00 12.00
T*(8,L)X*C16 21.0 FC/PC60C 1360 42.0 32.6 14.50 12.00
T*(8,L)X*C16 21.0 UC60C 1400 41.5 31.6 14.00 12.00
T*(8,L)X*C20 21.0 FC/PC60C 1485 42.0 33.4 14.50 12.00
T*(8,L)X*C20 21.0 UC60C 1485 41.5 32.8 14.00 12.00
T*9(C,V)*C16 21.0 FC/PC60C 1445 41.0 32.0 13.25 11.50
T*9(C,V)*C16 21.0 UC60C 1445 40.5 31.0 13.20 11.50
T*9(C,V)*C20 21.0 FC/PC60C 1445 41.5 32.0 13.75 11.50
T*9(C,V)*C20 21.0 UC60C 1445 41.0 31.2 13.50 11.50
T*9(C,V)*D20 24.5 FC/MC/PC60D 1445 41.5 32.2 13.75 11.50
T*9(C,V)*D20 24.5 UC60D 1445 41.0 31.4 13.50 11.50
T*9X*C16 21.0 FC/PC60C 1460 42.0 33.2 14.00 12.00
YHJD42S41S4
T*9X*C16 21.0 UC60C 1460 41.0 31.4 13.75 11.50
T*9X*C20 21.0 FC/PC60C 1460 42.0 33.2 14.50 12.00
T*9X*C20 21.0 UC60C 1460 41.5 31.6 14.00 12.00
T*9X*D20 24.5 FC/MC/PC60D 1515 42.0 33.6 14.50 12.00
T*9X*D20 24.5 UC60D 1515 42.0 33.2 14.50 12.00
Y*(8,L)C*C16 21.0 FC/PC60C 1420 41.5 32.2 14.00 12.00
Y*(8,L)C*C16 21.0 UC60C 1420 41.0 31.4 13.75 11.50
Y*(8,L)C*C20 21.0 FC/PC60C 1410 42.0 32.4 14.00 12.00
Y*(8,L)C*C20 21.0 UC60C 1410 41.0 31.4 14.00 12.00
Y*9C*C16 21.0 FC/PC60C 1445 41.0 32.0 13.25 11.50
Y*9C*C16 21.0 UC60C 1445 40.5 31.0 13.20 11.50
Y*9C*C20 21.0 FC/PC60C 1445 41.5 32.0 13.75 11.50
Y*9C*C20 21.0 UC60C 1445 41.0 31.2 13.50 11.50
Y*9C*D20 24.5 FC/MC/PC60D 1445 41.5 32.2 13.75 11.50
Y*9C*D20 24.5 UC60D 1445 41.0 31.4 13.50 11.50
T*(8,L)V*C16 21.0 FC/MC62D 1635 45.0 34.2 14.50 12.00
T*(8,L)V*C16 21.0 FC/PC60C 1600 44.5 33.6 14.00 12.00
T*(8,L)V*C16 21.0 UC60C 1625 44.0 33.0 14.00 12.00
T*(8,L)V*C20 21.0 FC/MC62D 1615 45.0 34.2 14.50 12.00
T*(8,L)V*C20 21.0 FC/PC60C 1620 44.5 33.8 14.00 12.00
T*(8,L)V*C20 21.0 UC60C 1605 44.5 33.2 14.50 12.00
T*(8,L)X*C16 21.0 FC/MC62D 1610 45.0 34.2 14.50 12.00
T*(8,L)X*C16 21.0 FC/PC60C 1605 44.5 33.8 14.50 12.00
T*(8,L)X*C16 21.0 UC60C 1605 44.5 33.2 14.50 12.00
YHJD48S41S4
T*(8,L)X*C20 21.0 FC/MC62D 1665 45.5 34.4 14.50 12.00
T*(8,L)X*C20 21.0 FC/PC60C 1595 44.5 34.0 14.50 12.00
T*(8,L)X*C20 21.0 UC60C 1540 45.0 33.6 14.50 12.00
T*9(C,V)*C16 21.0 FC/MC62D 1590 45.0 34.0 14.00 12.00
T*9(C,V)*C16 21.0 FC/PC60C 1590 44.0 33.6 14.00 12.00
T*9(C,V)*C16 21.0 UC60C 1590 44.0 33.0 14.00 12.00
T*9(C,V)*C20 21.0 FC/MC62D 1655 44.5 33.8 14.00 12.00
T*9(C,V)*C20 21.0 FC/PC60C 1645 44.0 33.6 14.00 12.00
T*9(C,V)*C20 21.0 UC60C 1645 44.0 33.0 13.75 11.50

571209-YTG-C-1012

FURNACE COOLING
UNIT COIL
RATED Net MBH
CFM TOTAL SENS.
T*9(C,V)*D20 24.5 FC/MC/PC60D 1615 44.5 33.6 14.00 12.00
T*9(C,V)*D20 24.5 FC/MC62D 1630 45.0 34.0 14.00 12.00
T*9(C,V)*D20 24.5 UC60D 1615 44.0 33.0 14.00 12.00
T*9X*C16 21.0 FC/MC62D 1550 45.0 34.2 14.50 12.00
T*9X*C16 21.0 FC/PC60C 1575 44.5 33.8 14.50 12.00
T*9X*C16 21.0 UC60C 1575 44.5 33.2 14.50 12.00
T*9X*C20 21.0 FC/MC62D 1595 45.0 34.2 14.50 12.00
T*9X*C20 21.0 FC/PC60C 1625 44.5 34.0 14.50 12.00
T*9X*C20 21.0 UC60C 1625 44.5 33.2 14.50 12.00
T*9X*D20 24.5 FC/MC/PC60D 1490 45.5 33.6 14.50 12.00
T*9X*D20 24.5 FC/MC62D 1610 45.0 34.2 14.50 12.00
T*9X*D20 24.5 UC60D 1490 44.5 32.8 14.50 12.00
Y*(8,L)C*C16 21.0 FC/MC62D 1635 45.0 34.2 14.50 12.00
YHJD48S41S4 Y*(8,L)C*C16 21.0 FC/PC60C 1600 44.5 33.6 14.00 12.00
Y*(8,L)C*C16 21.0 UC60C 1625 44.0 33.0 14.00 12.00
Y*(8,L)C*C20 21.0 FC/MC62D 1615 45.0 34.2 14.50 12.00
Y*(8,L)C*C20 21.0 FC/PC60C 1620 44.5 33.8 14.00 12.00
Y*(8,L)C*C20 21.0 UC60C 1605 44.5 33.2 14.50 12.00
Y*9C*C16 21.0 FC/MC62D 1590 45.0 34.0 14.00 12.00
Y*9C*C16 21.0 FC/PC60C 1590 44.0 33.6 14.00 12.00
Y*9C*C16 21.0 UC60C 1590 44.0 33.0 14.00 12.00
Y*9C*C20 21.0 FC/MC62D 1655 44.5 33.8 14.00 12.00
Y*9C*C20 21.0 FC/PC60C 1645 44.0 33.6 14.00 12.00
Y*9C*C20 21.0 UC60C 1645 44.0 33.0 13.75 11.50
Y*9C*D20 24.5 FC/MC/PC60D 1615 44.5 33.6 14.00 12.00
Y*9C*D20 24.5 FC/MC62D 1630 45.0 34.0 14.00 12.00
Y*9C*D20 24.5 UC60D 1615 44.0 33.0 14.00 12.00
T*(8,L)V*C20 21.0 FC/MC62D 1600 57.0 39.5 13.70 11.60
T*(8,L)V*C20 21.0 FC64D 1855 57.0 42.5 13.25 11.40
T*(8,L)X*C20 21.0 FC/MC62D 1665 57.5 40.0 14.00 12.00
T*(8,L)X*C20 21.0 FC64D 1665 56.0 41.0 13.75 11.60
T*9(C,V)*C20 21.0 FC/MC62D 1655 57.0 39.5 13.50 11.60
T*9(C,V)*C20 21.0 FC64D 1630 55.5 40.5 13.25 11.40
T*9(C,V)*D20 24.5 FC/MC62D 1630 57.5 39.5 13.70 11.60
T*9(C,V)*D20 24.5 FC64D 1630 55.5 40.0 13.25 11.40
T*9X*C20 21.0 FC/MC62D 1595 57.5 40.0 14.00 12.00
YHJD60S41S5
T*9X*C20 21.0 FC64D 1595 55.5 40.0 13.50 11.40
T*9X*D20 24.5 FC/MC62D 1645 57.5 40.0 14.00 12.00
T*9X*D20 24.5 FC64D 1645 56.0 40.5 13.50 11.40
Y*(8,L)C*C20 21.0 FC/MC62D 1600 57.0 39.5 13.70 11.60
Y*(8,L)C*C20 21.0 FC64D 1855 57.0 42.5 13.25 11.40
Y*9C*C20 21.0 FC/MC62D 1655 57.0 39.5 13.50 11.60
Y*9C*C20 21.0 FC64D 1655 55.5 40.5 13.20 11.30
Y*9C*D20 24.5 FC/MC62D 1630 57.5 39.5 13.70 11.60
Y*9C*D20 24.5 FC64D 1630 55.5 40.0 13.25 11.40
1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number.
2. High Efficiency Motor Furnaces have B.O.D (Blower on Delay) standard.

571209-YTG-C-1012
HEATING CAPACITY - With Air Handler

HEATING2
UNIT AIR COIL1
MODEL HANDLER 47 F 17 F HSPF
MODEL
MBH COP KW MBH COP KW STD
AHE18B – 18.0 3.70 1.43 11.1 2.28 1.43 7.70
AHR18B – 18.0 3.54 1.49 11.4 2.22 1.50 7.70
AHV18B – 18.0 3.50 1.51 11.1 2.22 1.46 8.00
AV*24 – 18.0 3.66 1.36 9.9 2.78 1.06 8.20
MV12B FC/MC18B 18.0 3.58 1.39 8.6 2.52 1.24 7.95
YHJD18S41S2
MV12B FC/MC24B 18.0 3.62 1.36 10.6 2.88 1.03 8.10
MV12B FC/MC30B 18.0 3.62 1.36 10.6 2.88 1.03 8.10
MX12B FC/MC18B 18.0 3.70 1.43 11.0 2.28 1.41 8.20
MX12B FC/MC24B 18.0 3.98 1.33 10.9 2.46 1.30 8.20
MX12B FC/MC30B 18.0 3.98 1.33 10.9 2.46 1.30 8.20
AHE24B – 23.4 3.58 1.92 13.3 2.50 1.56 8.20
AHE30B – 23.4 3.58 1.92 13.3 2.50 1.56 8.20
AHR24B – 23.4 3.40 2.02 13.5 2.40 1.65 7.70
AHV24B – 22.6 3.46 1.91 13.2 2.50 1.55 8.00
AHV30B – 23.0 3.52 1.91 13.3 2.50 1.56 8.20
YHJD24S41S4 AHV36C – 23.4 3.64 1.88 13.3 2.56 1.52 8.20
AV*36 – 23.2 3.64 1.87 13.3 2.62 1.49 8.20
MV12B FC/MC35B 23.2 3.56 1.91 13.3 2.54 1.53 8.20
MV12B FC/MC43B 23.8 3.66 1.91 13.5 2.60 1.52 8.20
MX12B FC/MC35B 23.2 3.64 1.87 13.0 2.56 1.49 8.20
MX12B FC/MC43B 23.2 3.62 1.88 13.0 2.54 1.50 8.20
AHE30B – 26.6 3.40 2.29 15.5 2.42 1.88 7.70
AHE36C – 26.8 3.56 2.21 15.3 2.50 1.79 7.70
AHR30B – 27.6 3.30 2.45 16.2 2.32 2.05 7.70
AHR36B – 27.8 3.36 2.42 16.2 2.32 2.05 7.70
AHV30B – 28.0 3.48 2.36 15.5 2.30 1.97 7.70
AHV36C – 27.6 3.62 2.23 15.0 2.42 1.82 8.20
AV*36 – 27.2 3.66 2.18 15.4 2.54 1.78 8.20
YHJD30S41S4 MV12B FC/MC35B 26.8 3.50 2.24 15.4 2.48 1.82 8.00
MV12B FC/MC43B 27.4 3.58 2.24 15.6 2.46 1.86 8.20
MV16C FC/MC35C 27.0 3.56 2.22 15.4 2.50 1.80 8.15
MV16C FC/MC43C 27.4 3.60 2.23 15.5 2.48 1.83 8.20
MX12B FC/MC35B 26.8 3.46 2.27 15.5 2.44 1.86 7.70
MX12B FC/MC43B 27.2 3.56 2.24 15.6 2.48 1.84 7.70
MX16C FC/MC35C 26.4 3.56 2.17 15.2 2.52 1.77 7.70
MX16C FC/MC43C 26.4 3.56 2.17 15.2 2.50 1.78 7.70
AHE36C – 30.6 3.44 2.61 21.6 2.84 2.23 8.20
AHE42D – 30.6 3.48 2.93 21.4 2.88 2.42 8.20
AHR36B – 31.4 3.28 2.80 22.6 2.68 2.47 7.70
AHR42C – 31.4 3.32 2.77 22.2 2.70 2.41 7.70
AHV36C – 30.8 3.42 2.64 22.0 2.78 2.32 8.00
AHV42D – 30.6 3.46 2.59 21.6 2.88 2.20 8.20
AV*36 – 33.8 3.60 2.75 21.8 2.80 2.28 8.20
YHJD36S41S4 MV12B FC/MC43B 34.2 3.58 2.80 21.8 2.76 2.31 8.20
MV12D FC/MC48D 33.8 3.70 2.68 21.6 2.86 2.21 8.20
MV16C FC/MC43C 33.8 3.60 2.75 21.6 2.78 2.28 8.20
MV16C FC/MC48C 34.0 3.64 2.74 21.8 2.82 2.27 8.20
MX12B FC/MC43B 30.8 3.38 2.67 21.8 2.78 2.30 7.70
MX12D FC/MC48D 30.8 3.48 2.59 21.6 2.84 2.23 8.20
MX16C FC/MC43C 30.2 3.44 2.57 21.0 2.84 2.17 7.70
MX16C FC/MC48C 30.2 3.48 2.54 21.4 2.88 2.18 7.70

571209-YTG-C-1012
HEATING CAPACITY - With Air Handler (Continued)

HEATING2
UNIT AIR COIL1
MODEL HANDLER 47 F 17 F HSPF
MODEL
AHE48D – 39.0 3.90 3.00 21.8 2.64 2.52 8.20
AHR48D – 40.0 3.66 3.20 22.4 2.48 2.65 7.70
AHV48D – 39.5 3.86 3.00 21.0 2.54 2.42 8.20
AV*48 – 39.5 3.96 2.92 22.2 2.68 2.43 8.20
YHJD42S41S4 AV*60 – 39.5 3.98 2.91 22.2 2.70 2.41 8.20
MV16C FC60C 40.0 3.86 3.04 21.4 2.50 2.51 8.20
MV20D FC/MC60D 39.5 3.94 2.94 22.2 2.66 2.45 8.20
MX16C FC60C 40.0 4.08 2.87 22.0 2.66 2.42 8.20
MX20D FC/MC60D 40.0 4.10 2.86 21.8 2.68 2.38 8.20
AHE48D – 45.5 3.68 3.62 26.8 2.84 2.76 8.20
AHE60D – 44.5 3.72 3.50 26.4 2.90 2.67 8.20
AHR48D – 46.0 3.56 3.79 27.4 2.74 2.93 7.70
AHR60D – 45.5 3.52 3.79 27.2 2.74 2.91 7.75
AHV48D – 44.5 3.56 3.66 26.4 2.78 2.78 8.20
AHV60D – 45.0 3.62 3.64 26.8 2.82 2.78 8.20
AV*48 – 46.0 3.78 3.57 26.8 2.90 2.71 8.20
YHJD48S41S4
AV*60 – 45.5 3.80 3.51 26.8 2.94 2.67 8.20
MV16C FC60C 45.0 3.70 3.56 26.6 2.90 2.69 8.20
MV20D FC/MC60D 45.5 3.72 3.58 27.0 2.86 2.77 8.20
MV20D FC/MC62D 45.0 3.72 3.54 26.6 2.90 2.69 8.20
MX16C FC60C 45.0 3.80 3.47 26.2 2.96 2.59 8.20
MX20D FC/MC60D 45.5 3.84 3.47 26.6 2.94 2.65 8.20
MX20D FC/MC62D 45.5 3.80 3.51 26.4 2.94 2.63 8.20
AHE60D – 58.0 3.54 5.01 39.0 2.76 4.14 8.20
AHR60D – 58.0 3.44 5.28 40.0 2.68 4.37 8.15
AHV60D – 58.0 3.42 5.18 39.0 2.68 4.26 8.15
YHJD60S41S5 MV20D FC/MC62D 58.0 3.52 5.08 39.0 2.72 4.20 8.20
MV20D FC64D 58.0 3.40 5.34 40.5 2.80 4.24 8.10
MX20D FC/MC62D 58.0 3.58 4.95 38.5 2.76 4.09 8.20
MX20D FC64D 58.0 3.44 5.20 40.0 2.86 4.10 8.15
1. Rated CFM same as for cooling.
2. Heating MBH based on AHRI standards of 70 °F DB (Dry Bulb) entering indoor air, 72% RH (Relative Humidity) outdoor air with 25 feet of interconnecting piping and
no supplemental electric heat operation.
COP equals MBH output divided by (total KW input x 3.412).
HSPF (Heating Seasonal Performance Factor) is the total heating output during a normal annual usage period for heating divided by the total electric power input during
the same period.
— = Not Applicable.

571209-YTG-C-1012
HEATING CAPACITY - Upflow, Downflow, and Horizontal Furnaces and Coils (Coil Only Ratings)
HEATING2
UNIT COIL1
MODEL 47 F 17 F HSPF
MODEL
13 SEER HP COIL ONLY RATINGS
FC/MC/PC18 18.0 3.36 1.50 12.7 2.16 1.24 8.20
FC/MC/PC24 18.0 3.36 1.45 10.4 2.60 1.17 8.20
YHJD18S41S2 FC/MC/PC30 18.0 3.42 1.54 11.4 2.18 1.53 7.75
UC24 18.0 3.42 1.54 11.4 2.20 1.52 7.75
UC30 18.0 3.42 1.54 11.4 2.20 1.52 7.75
FC/MC/PC32 24.0 3.36 2.09 13.9 2.38 1.71 7.70
FC/MC/PC35 23.8 3.32 2.10 13.9 2.36 1.73 7.70
YHJD24S41S4
FC/MC/PC37 24.0 3.44 2.04 14.1 2.42 1.71 7.70
FC/MC/PC43 24.0 3.44 2.04 14.1 2.42 1.71 7.70
FC/MC/PC32 27.4 3.28 2.45 16.0 2.30 2.04 7.70
FC/MC/PC35 27.4 3.28 2.45 16.0 2.30 2.04 7.70
YHJD30S41S4
FC/MC/PC37 28.0 3.38 2.43 16.1 2.32 2.03 7.70
FC/MC/PC43 28.0 3.38 2.43 16.1 2.32 2.03 7.70
FC/MC/PC37 34.4 3.42 2.95 22.4 2.62 2.51 7.70
FC/MC/PC43 34.6 3.40 2.98 22.2 2.60 2.50 7.70
YHJD36S41S4
FC/MC/PC48 34.8 3.44 2.96 22.6 2.64 2.51 7.70
UC48 35.0 3.52 2.91 22.4 2.62 2.51 7.70
FC/MC/PC60 40.5 3.72 3.19 23.0 2.50 2.70 7.70
YHJD42S41S4
UC60 40.0 3.68 3.18 22.8 2.48 2.69 7.70
FC/MC/PC60 46.0 3.58 3.76 27.4 2.76 2.91 7.70
YHJD48S41S4 FC/MC62 46.0 3.54 3.81 27.4 2.76 2.91 7.70
UC60 46.0 3.56 3.79 27.4 2.74 2.93 7.70
FC/MC62 58.0 3.44 5.24 39.5 2.66 4.35 7.80
YHJD60S41S5
FC64 58.0 3.36 5.49 40.5 2.76 4.30 7.80
the same period.

571209-YTG-C-1012
HEATING CAPACITY - With High Efficiency Motor Furnaces

HEATING2
FURNACE COIL1
MODEL
MODEL MODEL 47 F 17 F HSPF
T*(8,L)V*A12 FC/MC/PC18A 18.0 3.58 1.37 7.7 2.28 0.99 8.00
T*(8,L)V*A12 FC/MC/PC24A 18.0 3.70 1.36 10.6 2.90 1.07 8.30
T*(8,L)V*A12 FC/MC/PC30A 18.0 3.70 1.36 10.6 2.90 1.07 8.30
T*(8,L)V*A12 UC18A 18.0 3.62 1.37 9.1 2.58 1.03 8.10
T*(8,L)V*A12 UC24A 18.0 3.72 1.36 10.7 2.94 1.07 8.30
T*(8,L)V*A12 UC30A 18.0 3.72 1.36 10.7 2.94 1.07 8.30
T*(8,L)V*B12 FC/MC/PC18B 18.0 3.56 1.37 7.7 2.30 0.98 7.90
T*(8,L)V*B12 FC/MC/PC24B 18.0 3.68 1.34 10.1 2.88 1.03 8.20
T*(8,L)V*B12 FC/MC/PC30B 18.0 3.68 1.34 10.1 2.88 1.03 8.20
T*(8,L)V*B12 UC18B 18.0 3.60 1.36 9.7 2.74 1.04 8.00
T*(8,L)V*B12 UC24B 18.0 3.70 1.34 10.5 2.96 1.04 8.20
T*(8,L)V*B12 UC30B 18.0 3.70 1.34 10.4 2.96 1.03 8.20
T*(8,L)X*A12 FC/MC/PC18A 18.0 2.92 1.81 11.1 2.24 1.45 8.10
T*(8,L)X*A12 FC/MC/PC24A 18.0 3.16 1.67 10.9 2.44 1.31 8.20
T*(8,L)X*A12 FC/MC/PC30A 18.0 3.16 1.67 10.9 2.44 1.31 8.20
T*(8,L)X*A12 UC18B 18.0 3.60 1.55 11.1 2.26 1.44 8.20
T*(8,L)X*A12 UC24B 18.0 3.68 1.50 11.1 2.02 1.61 8.15
T*(8,L)X*A12 UC30B 18.0 3.68 1.50 11.1 2.02 1.61 8.15
T*(8,L)X*B12 FC/MC/PC18B 18.0 3.00 1.76 11.0 2.28 1.41 8.15
T*(8,L)X*B12 FC/MC/PC24B 18.0 3.16 1.67 10.9 2.44 1.31 8.20
T*(8,L)X*B12 FC/MC/PC30B 18.0 3.16 1.67 10.9 2.44 1.31 8.20
T*(8,L)X*B12 UC18B 18.0 3.58 1.56 11.1 2.24 1.45 8.20
T*(8,L)X*B12 UC24B 18.0 3.66 1.52 11.0 2.34 1.38 8.10
T*(8,L)X*B12 UC30B 18.0 3.66 1.52 11.0 2.34 1.38 8.10
T*9V*A10 FC/MC/PC18A 18.0 3.44 1.62 11.2 2.18 1.51 7.90
T*9V*A10 FC/MC/PC24A 18.0 3.60 1.55 11.1 2.28 1.43 7.95
YHJD18S41S2
T*9V*A10 FC/MC/PC30A 18.0 3.60 1.55 11.1 2.28 1.43 7.95
T*9(C,V)*B12 FC/MC/PC18B 18.0 3.60 1.36 7.7 2.30 0.98 8.00
T*9(C,V)*B12 FC/MC/PC24B 18.0 3.74 1.34 10.5 2.94 1.05 8.30
T*9(C,V)*B12 FC/MC/PC30B 18.0 3.74 1.34 10.5 2.94 1.05 8.30
T*9(C,V)*B12 UC18B 18.0 3.64 1.35 9.1 2.62 1.02 8.10
T*9(C,V)*B12 UC24B 18.0 3.76 1.34 10.7 2.96 1.06 8.30
T*9(C,V)*B12 UC30B 18.0 3.76 1.34 10.7 2.96 1.06 8.30
T*9X*A10 FC/MC/PC18A 18.0 3.46 1.61 11.2 2.18 1.51 7.90
T*9X*A10 FC/MC/PC24A 18.0 3.62 1.55 11.1 2.28 1.43 7.90
T*9X*A10 FC/MC/PC30A 18.0 3.62 1.55 11.1 2.28 1.43 7.90
T*9X*B12 FC/MC/PC18B 18.0 3.00 1.76 11.0 2.30 1.40 8.10
T*9X*B12 FC/MC/PC24B 18.0 3.16 1.67 10.9 2.42 1.32 8.20
T*9X*B12 FC/MC/PC30B 18.0 3.16 1.67 10.9 2.42 1.32 8.20
T*9X*B12 UC18B 18.0 3.60 1.55 11.1 2.26 1.44 8.20
T*9X*B12 UC24B 18.0 3.72 1.49 10.9 2.36 1.35 8.15
T*9X*B12 UC30B 18.0 3.72 1.49 10.9 2.36 1.35 8.15
Y*(8,L)C*A12 FC/MC/PC18A 18.0 3.58 1.37 7.7 2.28 0.99 8.00
Y*(8,L)C*A12 FC/MC/PC24A 18.0 3.70 1.36 10.6 2.90 1.07 8.30
Y*(8,L)C*A12 FC/MC/PC30A 18.0 3.70 1.36 10.6 2.90 1.07 8.30
Y*(8,L)C*A12 UC18A 18.0 3.62 1.37 9.1 2.58 1.03 8.10
Y*(8,L)C*A12 UC24A 18.0 3.72 1.36 10.7 2.94 1.07 8.30
Y*(8,L)C*A12 UC30A 18.0 3.72 1.36 10.7 2.94 1.07 8.30
Y*(8,L)C*B12 FC/MC/PC18B 18.0 3.56 1.37 7.7 2.30 0.98 7.90
Y*(8,L)C*B12 FC/MC/PC24B 18.0 3.68 1.34 10.1 2.88 1.03 8.20
Y*(8,L)C*B12 FC/MC/PC30B 18.0 3.68 1.34 10.1 2.88 1.03 8.20
Y*(8,L)C*B12 UC18B 18.0 3.60 1.36 9.7 2.74 1.04 8.00

571209-YTG-C-1012
HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued)

HEATING2
FURNACE COIL1
MODEL
MODEL
Y*(8,L)C*B12 UC24B 18.0 3.70 1.34 10.5 2.96 1.04 8.20
Y*(8,L)C*B12 UC30B 18.0 3.70 1.34 10.4 2.96 1.03 8.20
Y*9C*B12 FC/MC/PC18B 18.0 3.60 1.36 7.7 2.30 0.98 8.00
Y*9C*B12 FC/MC/PC24B 18.0 3.74 1.34 10.5 2.94 1.05 8.30
YHJD18S41S2
Y*9C*B12 FC/MC/PC30B 18.0 3.74 1.34 10.5 2.94 1.05 8.30
Y*9C*B12 UC18B 18.0 3.64 1.35 9.1 2.62 1.02 8.10
Y*9C*B12 UC24B 18.0 3.76 1.34 10.7 2.96 1.06 8.30
Y*9C*B12 UC30B 18.0 3.76 1.34 10.7 2.96 1.06 8.30
T*(8,L)V*A12 FC/MC/PC32A 23.4 3.52 1.95 13.5 2.52 1.57 8.20
T*(8,L)V*A12 FC/MC/PC37A 23.8 3.62 1.93 13.6 2.54 1.57 8.20
T*(8,L)V*B12 FC/MC/PC35B 23.0 3.50 1.93 13.2 2.52 1.53 8.15
T*(8,L)V*B12 FC/MC/PC43B 23.4 3.60 1.90 13.3 2.54 1.53 8.20
T*(8,L)V*C16 FC/MC/PC35C 23.6 3.62 1.91 13.4 2.58 1.52 8.20
T*(8,L)V*C16 FC/MC/PC43C 24.0 3.74 1.88 13.6 2.60 1.53 8.20
T*(8,L)V*C20 FC/MC/PC35C 22.8 3.54 1.89 13.0 2.56 1.49 8.15
T*(8,L)V*C20 FC/MC/PC43C 23.2 3.64 1.87 13.2 2.58 1.50 8.20
T*(8,L)X*A12 FC/MC/PC32A 23.2 3.64 1.87 13.3 2.60 1.50 8.20
T*(8,L)X*A12 FC/MC/PC37A 23.8 3.78 1.84 13.5 2.66 1.49 8.20
T*(8,L)X*B12 FC/MC/PC35B 23.4 3.68 1.86 13.3 2.62 1.49 8.20
T*(8,L)X*B12 FC/MC/PC43B 23.8 3.78 1.84 13.5 2.66 1.49 8.20
T*(8,L)X*C16 FC/MC/PC35C 23.4 3.68 1.86 13.3 2.62 1.49 8.20
T*(8,L)X*C16 FC/MC/PC43C 23.8 3.76 1.85 13.4 2.64 1.49 8.20
T*(8,L)X*C20 FC/MC/PC35C 23.6 3.62 1.91 13.4 2.58 1.52 8.20
T*(8,L)X*C20 FC/MC/PC43C 23.6 3.70 1.87 13.5 2.62 1.51 8.20
T*9V*A10 FC/MC/PC32A 24.0 3.48 1.99 13.5 2.42 1.63 7.80
T*9V*A10 FC/MC/PC37A 24.0 3.52 1.98 13.8 2.44 1.66 7.90
T*9(C,V)*B12 FC/MC/PC35B 23.6 3.58 1.93 13.6 2.54 1.57 8.20
T*9(C,V)*B12 FC/MC/PC43B 23.8 3.64 1.92 13.6 2.56 1.56 8.20
T*9(C,V)*C16 FC/MC/PC35C 23.8 3.62 1.93 13.6 2.56 1.56 8.20
T*9(C,V)*C16 FC/MC/PC43C 23.8 3.66 1.91 13.5 2.58 1.53 8.20
T*9(C,V)*C20 FC/MC/PC35C 23.0 3.52 1.91 13.1 2.54 1.51 8.15
YHJD24S41S4
T*9(C,V)*C20 FC/MC/PC43C 24.0 3.72 1.89 13.7 2.60 1.54 8.20
T*9X*A10 FC/MC/PC32A 24.0 3.44 1.96 13.3 2.44 1.60 7.85
T*9X*A10 FC/MC/PC37A 24.0 3.52 1.95 13.4 2.48 1.58 7.85
T*9X*B12 FC/MC/PC35B 23.0 3.58 1.88 13.2 2.58 1.50 8.20
T*9X*B12 FC/MC/PC43B 23.6 3.72 1.86 13.4 2.64 1.49 8.20
T*9X*C16 FC/MC/PC35C 23.0 3.56 1.89 13.1 2.56 1.50 8.20
T*9X*C16 FC/MC/PC43C 23.6 3.72 1.86 13.4 2.64 1.49 8.20
T*9X*C20 FC/MC/PC35C 23.4 3.66 1.87 13.4 2.60 1.51 8.20
T*9X*C20 FC/MC/PC43C 23.6 3.70 1.87 13.5 2.62 1.51 8.20
Y*(8,L)C*A12 FC/MC/PC32A 23.4 3.52 1.95 13.5 2.52 1.57 8.20
Y*(8,L)C*A12 FC/MC/PC37A 23.8 3.62 1.93 13.6 2.54 1.57 8.20
Y*(8,L)C*B12 FC/MC/PC35B 23.0 3.50 1.93 13.2 2.52 1.53 8.15
Y*(8,L)C*B12 FC/MC/PC43B 23.4 3.60 1.90 13.3 2.54 1.53 8.20
Y*(8,L)C*C16 FC/MC/PC35C 23.6 3.62 1.91 13.4 2.58 1.52 8.20
Y*(8,L)C*C16 FC/MC/PC43C 24.0 3.74 1.88 13.6 2.60 1.53 8.20
Y*(8,L)C*C20 FC/MC/PC35C 22.8 3.54 1.89 13.0 2.56 1.49 8.15
Y*(8,L)C*C20 FC/MC/PC43C 23.2 3.64 1.87 13.2 2.58 1.50 8.20
Y*9C*B12 FC/MC/PC35B 23.6 3.58 1.93 13.6 2.54 1.57 8.20
Y*9C*B12 FC/MC/PC43B 23.8 3.64 1.92 13.6 2.56 1.56 8.20
Y*9C*C16 FC/MC/PC35C 23.8 3.62 1.93 13.6 2.56 1.56 8.20
Y*9C*C16 FC/MC/PC43C 23.8 3.66 1.91 13.5 2.58 1.53 8.20
Y*9C*C20 FC/MC/PC35C 23.0 3.52 1.91 13.1 2.54 1.51 8.15
Y*9C*C20 FC/MC/PC43C 24.0 3.72 1.89 13.7 2.60 1.54 8.20

571209-YTG-C-1012
HEATING2
FURNACE COIL1
MODEL
MODEL
T*(8,L)V*A12 FC/MC/PC32A 27.4 3.30 2.43 16.0 2.32 2.02 7.85
T*(8,L)V*A12 FC/MC/PC37A 27.2 3.48 2.29 15.7 2.42 1.90 8.05
T*(8,L)V*B12 FC/MC/PC35B 27.0 3.42 2.31 15.6 2.42 1.89 7.95
T*(8,L)V*B12 FC/MC/PC43B 27.6 3.52 2.30 15.7 2.42 1.90 8.15
T*(8,L)V*C16 FC/MC/PC35C 26.8 3.48 2.26 15.5 2.44 1.86 8.00
T*(8,L)V*C16 FC/MC/PC43C 27.4 3.60 2.23 15.5 2.50 1.82 8.20
T*(8,L)V*C20 FC/MC/PC35C 27.2 3.50 2.28 15.5 2.44 1.86 8.10
T*(8,L)V*C20 FC/MC/PC43C 27.2 3.62 2.20 15.5 2.50 1.82 8.20
T*(8,L)X*A12 FC/MC/PC32A 27.0 3.42 2.31 15.6 2.40 1.90 7.95
T*(8,L)X*A12 FC/MC/PC37A 27.8 3.64 2.24 15.9 2.50 1.86 8.20
T*(8,L)X*B12 FC/MC/PC35B 27.4 3.52 2.28 15.6 2.44 1.87 8.10
T*(8,L)X*B12 FC/MC/PC43B 27.8 3.62 2.25 15.8 2.48 1.87 8.20
T*(8,L)X*C16 FC/MC/PC35C 27.2 3.56 2.24 15.4 2.46 1.83 8.15
T*(8,L)X*C16 FC/MC/PC43C 27.2 3.64 2.19 15.4 2.52 1.79 8.20
T*(8,L)X*C20 FC/MC/PC35C 26.0 3.40 2.24 14.9 2.44 1.79 7.85
T*(8,L)X*C20 FC/MC/PC43C 26.4 3.52 2.20 15.0 2.48 1.77 8.00
T*9(C,V)*B12 FC/MC/PC35B 27.2 3.36 2.37 15.8 2.36 1.96 7.90
T*9(C,V)*B12 FC/MC/PC43B 27.6 3.48 2.32 15.8 2.40 1.93 8.10
T*9(C,V)*C16 FC/MC/PC35C 26.8 3.46 2.27 15.5 2.44 1.86 8.00
T*9(C,V)*C16 FC/MC/PC43C 27.4 3.54 2.27 15.7 2.44 1.89 8.15
T*9(C,V)*C20 FC/MC/PC35C 26.8 3.46 2.27 15.5 2.44 1.86 8.00
YHJD30S41S4
T*9(C,V)*C20 FC/MC/PC43C 27.4 3.58 2.24 15.5 2.48 1.83 8.20
T*9X*B12 FC/MC/PC35B 27.2 3.50 2.28 15.5 2.44 1.86 8.10
T*9X*B12 FC/MC/PC43B 27.6 3.60 2.25 15.7 2.48 1.85 8.20
T*9X*C16 FC/MC/PC35C 27.0 3.52 2.25 15.5 2.46 1.85 8.10
T*9X*C16 FC/MC/PC43C 27.4 3.60 2.23 15.6 2.48 1.84 8.20
T*9X*C20 FC/MC/PC35C 25.8 3.42 2.21 14.7 2.44 1.77 7.80
T*9X*C20 FC/MC/PC43C 25.6 3.34 2.25 14.5 2.40 1.77 7.70
Y*(8,L)C*A12 FC/MC/PC32A 27.4 3.30 2.43 16.0 2.32 2.02 7.85
Y*(8,L)C*A12 FC/MC/PC37A 27.2 3.48 2.29 15.7 2.42 1.90 8.05
Y*(8,L)C*B12 FC/MC/PC35B 27.0 3.42 2.31 15.6 2.42 1.89 7.95
Y*(8,L)C*B12 FC/MC/PC43B 27.6 3.52 2.30 15.7 2.42 1.90 8.15
Y*(8,L)C*C16 FC/MC/PC35C 26.8 3.48 2.26 15.5 2.44 1.86 8.00
Y*(8,L)C*C16 FC/MC/PC43C 27.4 3.60 2.23 15.5 2.50 1.82 8.20
Y*(8,L)C*C20 FC/MC/PC35C 27.2 3.50 2.28 15.5 2.44 1.86 8.10
Y*(8,L)C*C20 FC/MC/PC43C 27.2 3.62 2.20 15.5 2.50 1.82 8.20
Y*9C*B12 FC/MC/PC35B 27.2 3.36 2.37 15.8 2.36 1.96 7.90
Y*9C*B12 FC/MC/PC43B 27.6 3.48 2.32 15.8 2.40 1.93 8.10
Y*9C*C16 FC/MC/PC35C 26.8 3.46 2.27 15.5 2.44 1.86 8.00
Y*9C*C16 FC/MC/PC43C 27.4 3.54 2.27 15.7 2.44 1.89 8.15
Y*9C*C20 FC/MC/PC35C 26.8 3.46 2.27 15.5 2.44 1.86 8.00
Y*9C*C20 FC/MC/PC43C 27.4 3.58 2.24 15.5 2.48 1.83 8.20
T*(8,L)V*A12 FC/MC/PC37A 34.0 3.46 2.88 22.2 2.66 2.45 8.20
T*(8,L)V*B12 FC/MC/PC43B 34.6 3.48 2.91 22.4 2.66 2.47 8.20
T*(8,L)V*C16 FC/MC/PC43C 34.0 3.56 2.80 21.6 2.74 2.31 8.20
T*(8,L)V*C16 FC/MC/PC48C 34.2 3.62 2.77 21.8 2.78 2.30 8.20
T*(8,L)V*C16 UC48C 34.4 3.72 2.71 21.6 2.78 2.28 8.20
T*(8,L)V*C20 FC/MC/PC43C 33.8 3.58 2.77 21.6 2.76 2.29 8.20
YHJD36S41S4 T*(8,L)V*C20 FC/MC/PC48C 34.0 3.66 2.72 21.8 2.82 2.27 8.20
T*(8,L)V*C20 UC48C 34.4 3.74 2.69 21.6 2.80 2.26 8.20
T*(8,L)X*A12 FC/MC/PC37A 34.4 3.62 2.78 22.0 2.76 2.34 8.20
T*(8,L)X*B12 FC/MC/PC43B 34.2 3.60 2.78 22.0 2.76 2.34 8.20
T*(8,L)X*C16 FC/MC/PC43C 33.4 3.64 2.69 21.2 2.82 2.20 8.20
T*(8,L)X*C16 FC/MC/PC48C 33.8 3.70 2.68 21.6 2.86 2.21 8.20
T*(8,L)X*C16 UC48C 34.2 3.80 2.64 21.4 2.86 2.19 8.20

571209-YTG-C-1012

HEATING2
FURNACE COIL1
MODEL
MODEL
T*(8,L)X*C20 FC/MC/PC43C 34.0 3.66 2.72 21.4 2.80 2.24 8.20
T*(8,L)X*C20 FC/MC/PC48C 34.2 3.70 2.71 21.6 2.84 2.23 8.20
T*(8,L)X*C20 UC48C 34.6 3.80 2.67 21.8 2.84 2.25 8.20
T*9(C,V)*B12 FC/MC/PC43B 34.2 3.48 2.88 22.0 2.66 2.42 8.20
T*9(C,V)*C16 FC/MC/PC43C 34.0 3.52 2.83 22.0 2.70 2.39 8.20
T*9(C,V)*C16 FC/MC/PC48C 34.2 3.58 2.80 22.0 2.76 2.34 8.20
T*9(C,V)*C16 UC48C 34.6 3.68 2.75 21.8 2.76 2.31 8.20
T*9(C,V)*C20 FC/MC/PC43C 34.0 3.56 2.80 21.8 2.74 2.33 8.20
T*9(C,V)*C20 FC/MC/PC48C 34.8 3.60 2.83 22.4 2.74 2.40 8.20
T*9(C,V)*C20 UC48C 35.2 3.68 2.80 22.4 2.74 2.40 8.20
T*9(C,V)*D20 FC/MC/PC48D 34.2 3.60 2.78 21.8 2.78 2.30 8.20
T*9(C,V)*D20 UC48D 34.6 3.70 2.74 21.8 2.76 2.31 8.20
T*9X*B12 FC/MC/PC43B 34.2 3.58 2.80 22.0 2.74 2.35 8.20
T*9X*C16 FC/MC/PC43C 34.0 3.60 2.77 21.8 2.76 2.31 8.20
T*9X*C16 FC/MC/PC48C 34.6 3.66 2.77 22.0 2.78 2.32 8.20
T*9X*C16 UC48C 34.8 3.76 2.71 22.0 2.80 2.30 8.20
T*9X*C20 FC/MC/PC43C 33.8 3.58 2.77 21.6 2.76 2.29 8.20
T*9X*C20 FC/MC/PC48C 34.0 3.64 2.74 21.8 2.80 2.28 8.20
T*9X*C20 UC48C 34.4 3.74 2.69 21.6 2.80 2.26 8.20
YHJD36S41S4
T*9X*D20 FC/MC/PC48D 34.0 3.66 2.72 21.8 2.82 2.27 8.20
T*9X*D20 UC48D 34.4 3.74 2.69 21.6 2.82 2.24 8.20
Y*(8,L)C*A12 FC/MC/PC37A 34.0 3.46 2.88 22.2 2.66 2.45 8.20
Y*(8,L)C*B12 FC/MC/PC43B 34.6 3.48 2.91 22.4 2.66 2.47 8.20
Y*(8,L)C*C16 FC/MC/PC43C 34.0 3.56 2.80 21.6 2.74 2.31 8.20
Y*(8,L)C*C16 FC/MC/PC48C 34.2 3.62 2.77 21.8 2.78 2.30 8.20
Y*(8,L)C*C16 UC48C 34.4 3.72 2.71 21.6 2.78 2.28 8.20
Y*(8,L)C*C20 FC/MC/PC43C 33.8 3.58 2.77 21.6 2.76 2.29 8.20
Y*(8,L)C*C20 FC/MC/PC48C 34.0 3.66 2.72 21.8 2.82 2.27 8.20
Y*(8,L)C*C20 UC48C 34.4 3.74 2.69 21.6 2.80 2.26 8.20
Y*9C*B12 FC/MC/PC43B 34.2 3.48 2.88 22.0 2.66 2.42 8.20
Y*9C*C16 FC/MC/PC43C 34.0 3.52 2.83 22.0 2.70 2.39 8.20
Y*9C*C16 FC/MC/PC48C 34.2 3.58 2.80 22.0 2.76 2.34 8.20
Y*9C*C16 UC48C 34.6 3.68 2.75 21.8 2.76 2.31 8.20
Y*9C*C20 FC/MC/PC43C 34.0 3.56 2.80 21.8 2.74 2.33 8.20
Y*9C*C20 FC/MC/PC48C 34.8 3.60 2.83 22.4 2.74 2.40 8.20
Y*9C*C20 UC48C 35.2 3.68 2.80 22.4 2.74 2.40 8.20
Y*9C*D20 FC/MC/PC48D 34.2 3.60 2.78 21.8 2.78 2.30 8.20
Y*9C*D20 UC48D 34.6 3.70 2.74 21.8 2.76 2.31 8.20
T*(8,L)V*C16 FC/PC60C 40.0 3.88 3.02 22.4 2.60 2.52 8.20
T*(8,L)V*C16 UC60C 39.5 3.84 3.01 22.4 2.58 2.54 8.20
T*(8,L)V*C20 FC/PC60C 39.5 3.92 2.95 22.4 2.64 2.49 8.20
T*(8,L)V*C20 UC60C 39.5 3.88 2.98 22.2 2.62 2.48 8.20
T*(8,L)X*C16 FC/PC60C 39.5 3.98 2.91 22.2 2.68 2.43 8.20
T*(8,L)X*C16 UC60C 39.0 3.94 2.90 22.0 2.68 2.41 8.20
T*(8,L)X*C20 FC/PC60C 40.0 4.00 2.93 22.4 2.70 2.43 8.20
T*(8,L)X*C20 UC60C 39.5 3.96 2.92 22.4 2.66 2.47 8.20
YHJD42S41S4
T*9(C,V)*C16 FC/PC60C 40.0 3.78 3.10 22.8 2.54 2.63 8.20
T*9(C,V)*C16 UC60C 40.0 3.74 3.13 22.8 2.52 2.65 8.20
T*9(C,V)*C20 FC/PC60C 40.0 3.82 3.07 22.6 2.56 2.59 8.20
T*9(C,V)*C20 UC60C 40.0 3.78 3.10 22.6 2.54 2.61 8.20
T*9(C,V)*D20 FC/MC/PC60D 40.0 3.86 3.04 22.6 2.60 2.55 8.20
T*9(C,V)*D20 UC60D 39.5 3.82 3.03 22.4 2.58 2.54 8.20
T*9X*C16 FC/PC60C 40.0 3.94 2.97 22.6 2.64 2.51 8.20
T*9X*C16 UC60C 39.5 3.86 3.00 22.2 2.60 2.50 8.20

571209-YTG-C-1012

HEATING2
FURNACE COIL1
MODEL
MODEL
T*9X*C20 FC/PC60C 40.0 3.98 2.94 22.4 2.68 2.45 8.20
T*9X*C20 UC60C 39.5 3.90 2.97 22.2 2.64 2.46 8.20
T*9X*D20 FC/MC/PC60D 40.0 4.04 2.90 22.4 2.72 2.41 8.20
T*9X*D20 UC60D 39.5 4.00 2.89 22.4 2.70 2.43 8.20
Y*(8,L)C*C16 FC/PC60C 40.0 3.88 3.02 22.4 2.60 2.52 8.20
Y*(8,L)C*C16 UC60C 39.5 3.84 3.01 22.4 2.58 2.54 8.20
Y*(8,L)C*C20 FC/PC60C 39.5 3.92 2.95 22.4 2.64 2.49 8.20
YHJD42S41S4
Y*(8,L)C*C20 UC60C 39.5 3.88 2.98 22.2 2.62 2.48 8.20
Y*9C*C16 FC/PC60C 40.0 3.78 3.10 22.8 2.54 2.63 8.20
Y*9C*C16 UC60C 40.0 3.74 3.13 22.8 2.52 2.65 8.20
Y*9C*C20 FC/PC60C 40.0 3.82 3.07 22.6 2.56 2.59 8.20
Y*9C*C20 UC60C 40.0 3.78 3.10 22.6 2.54 2.61 8.20
Y*9C*D20 FC/MC/PC60D 40.0 3.86 3.04 22.6 2.60 2.55 8.20
Y*9C*D20 UC60D 39.5 3.82 3.03 22.4 2.58 2.54 8.20
T*(8,L)V*C16 FC/MC62D 45.5 3.64 3.66 27.0 2.84 2.79 8.20
T*(8,L)V*C16 FC/PC60C 46.0 3.64 3.70 27.2 2.80 2.85 8.20
T*(8,L)V*C16 UC60C 45.5 3.62 3.68 27.0 2.80 2.83 8.20
T*(8,L)V*C20 FC/MC62D 45.5 3.66 3.64 26.8 2.84 2.76 8.20
T*(8,L)V*C20 FC/PC60C 46.0 3.64 3.70 27.2 2.82 2.83 8.20
T*(8,L)V*C20 UC60C 45.5 3.68 3.62 26.8 2.84 2.76 8.20
T*(8,L)X*C16 FC/MC62D 45.5 3.66 3.64 26.8 2.86 2.75 8.20
T*(8,L)X*C16 FC/PC60C 45.5 3.70 3.60 27.0 2.86 2.77 8.20
T*(8,L)X*C16 UC60C 45.5 3.68 3.62 26.8 2.84 2.76 8.20
T*(8,L)X*C20 FC/MC62D 45.0 3.70 3.56 26.8 2.88 2.73 8.20
T*(8,L)X*C20 FC/PC60C 45.5 3.72 3.58 26.8 2.88 2.73 8.20
T*(8,L)X*C20 UC60C 44.5 3.82 3.41 26.2 2.96 2.59 8.20
T*9(C,V)*C16 FC/MC62D 45.5 3.60 3.70 27.0 2.80 2.83 8.20
T*9(C,V)*C16 FC/PC60C 46.0 3.62 3.72 27.4 2.80 2.87 8.20
T*9(C,V)*C16 UC60C 45.5 3.58 3.72 27.2 2.78 2.87 8.20
T*9(C,V)*C20 FC/MC62D 45.5 3.56 3.74 27.2 2.78 2.87 8.20
T*9(C,V)*C20 FC/PC60C 46.0 3.62 3.72 27.4 2.80 2.87 8.20
T*9(C,V)*C20 UC60C 45.5 3.58 3.72 27.2 2.78 2.87 8.20
T*9(C,V)*D20 FC/MC/PC60D 46.0 3.64 3.70 27.2 2.80 2.85 8.20
YHJD48S41S4 T*9(C,V)*D20 FC/MC62D 45.5 3.60 3.70 27.2 2.80 2.85 8.20
T*9(C,V)*D20 UC60D 45.5 3.60 3.70 27.0 2.78 2.85 8.20
T*9X*C16 FC/MC62D 45.5 3.66 3.64 26.8 2.84 2.76 8.20
T*9X*C16 FC/PC60C 45.5 3.70 3.60 27.0 2.86 2.77 8.20
T*9X*C16 UC60C 45.5 3.66 3.64 26.8 2.84 2.76 8.20
T*9X*C20 FC/MC62D 45.0 3.68 3.58 26.8 2.86 2.75 8.20
T*9X*C20 FC/PC60C 45.5 3.74 3.56 26.8 2.88 2.73 8.20
T*9X*C20 UC60C 45.0 3.70 3.56 26.8 2.86 2.75 8.20
T*9X*D20 FC/MC/PC60D 44.5 3.80 3.43 26.2 2.96 2.59 8.20
T*9X*D20 FC/MC62D 45.5 3.64 3.66 27.0 2.84 2.79 8.20
T*9X*D20 UC60D 44.5 3.76 3.47 26.0 2.94 2.59 8.20
Y*(8,L)C*C16 FC/MC62D 45.5 3.64 3.66 27.0 2.84 2.79 8.20
Y*(8,L)C*C16 FC/PC60C 46.0 3.64 3.70 27.2 2.80 2.85 8.20
Y*(8,L)C*C16 UC60C 45.5 3.62 3.68 27.0 2.80 2.83 8.20
Y*(8,L)C*C20 FC/MC62D 45.5 3.66 3.64 26.8 2.84 2.76 8.20
Y*(8,L)C*C20 FC/PC60C 46.0 3.64 3.70 27.2 2.82 2.83 8.20
Y*(8,L)C*C20 UC60C 45.5 3.68 3.62 26.8 2.84 2.76 8.20
Y*9C*C16 FC/MC62D 45.5 3.60 3.70 27.0 2.80 2.83 8.20
Y*9C*C16 FC/PC60C 46.0 3.62 3.72 27.4 2.80 2.87 8.20
Y*9C*C16 UC60C 45.5 3.58 3.72 27.2 2.78 2.87 8.20

571209-YTG-C-1012

HEATING2
FURNACE COIL1
MODEL
MODEL
Y*9C*C20 FC/MC62D 45.5 3.56 3.74 27.2 2.78 2.87 8.20
Y*9C*C20 FC/PC60C 46.0 3.62 3.72 27.4 2.80 2.87 8.20
Y*9C*C20 UC60C 45.5 3.58 3.72 27.2 2.78 2.87 8.20
YHJD48S41S4
Y*9C*D20 FC/MC/PC60D 46.0 3.64 3.70 27.2 2.80 2.85 8.20
Y*9C*D20 FC/MC62D 45.5 3.60 3.70 27.2 2.80 2.85 8.20
Y*9C*D20 UC60D 45.5 3.60 3.70 27.0 2.78 2.85 8.20
T*(8,L)V*C20 FC/MC62D 58.0 3.38 5.03 39.0 2.66 4.30 8.15
T*(8,L)V*C20 FC64D 58.0 3.36 5.06 41.0 2.78 4.32 8.05
T*(8,L)X*C20 FC/MC62D 58.0 3.44 4.94 38.5 2.70 4.18 8.20
T*(8,L)X*C20 FC64D 58.0 3.36 5.06 39.5 2.82 4.10 8.10
T*9(C,V)*C20 FC/MC62D 58.0 3.36 5.06 39.0 2.64 4.33 8.10
T*9(C,V)*C20 FC64D 58.0 3.30 5.15 40.0 2.76 4.25 8.15
T*9(C,V)*D20 FC/MC62D 58.0 3.38 5.03 39.0 2.66 4.30 8.15
T*9(C,V)*D20 FC64D 58.0 3.30 5.15 40.0 2.76 4.25 8.15
T*9X*C20 FC/MC62D 58.0 3.44 4.94 38.5 2.70 4.18 8.20
YHJD60S41S5
T*9X*C20 FC64D 58.0 3.32 5.12 39.5 2.78 4.16 8.20
T*9X*D20 FC/MC62D 58.0 3.42 4.97 38.5 2.68 4.21 8.15
T*9X*D20 FC64D 58.0 3.36 5.06 40.0 2.80 4.19 8.20
Y*(8,L)C*C20 FC/MC62D 58.0 3.38 5.03 39.0 2.66 4.30 8.15
Y*(8,L)C*C20 FC64D 58.0 3.36 5.06 41.0 2.78 4.32 8.05
Y*9C*C20 FC/MC62D 58.0 3.36 5.06 39.0 2.64 4.33 8.10
Y*9C*C20 FC64D 58.0 3.30 5.15 40.5 2.74 4.33 8.10
Y*9C*D20 FC/MC62D 58.0 3.38 5.03 39.0 2.66 4.30 8.15
Y*9C*D20 FC64D 58.0 3.30 5.15 40.0 2.76 4.25 8.15
3. High Efficiency Motor Furnaces have B.O.D (Blower on Delay) standard.
the same period.

571209-YTG-C-1012
ACCESSORIES Compressor Blanket - Designed to further reduce the normal

Refer to Price Manual for specific model numbers. operating sound.
Start Assist Kit (S1-2SA067*) - May be required on 24, 30, 36, TXV Kits - S1-1TVM series thermal expansion valves precisely
& 42 models when a TXV is installed. May also be required on meter refrigerant for optimum performance over a wide range of
18 & 60 models in low voltage application. The 48 model has conditions. See System Charge table for TXV part number for
factory installed start assist. See Hard Start Kit Accessory each model.
Installation Manual for Hard Start Kit part number for each Outdoor Thermostat (S1-2TD06700124) - Provides additional
model. staging of supplemental electric heat.
Blower Time Delay - Available to increase efficiency when Thermostats - Compatible thermostat controls are available
installed. Installs on indoor section and maintains blower for through accessory sourcing. For optimum performance and
approximately one minute after cooling thermostat has been installation, refer to the UPGNET “Low Voltage Wiring Diagram”
satisfied. document to select and apply controls.
Low Temperature Cutout (S1-2LT06700224) - Prevents heat
pump operation below -1°F ambient temperature.
SOUND POWER LEVEL - TYPICAL OCTAVE BAND SPECTRUM (without tone adjustment)
Size Test Condition 63 125 250 500 1000 2000 4000 8000 dBA SQI
Cooling Mode 67 71 66 69 65 59 58 55 70 19.2
18
Heating Mode 68 70 66 68 67 61 60 57 71 19.2
Cooling Mode 68 70 67 69 72 65 66 62 75 19.0
24
Heating Mode 69 69 63 67 67 64 65 62 72 19.1
Cooling Mode 73 70 69 71 72 66 69 63 76 19.2
30
Heating Mode 71 73 69 71 73 68 65 62 76 19.1
Cooling Mode 72 73 71 72 73 67 66 63 76 19.0
36
Heating Mode 70 72 69 70 71 69 65 64 75 19.2
Cooling Mode 71 71 73 73 72 67 67 64 77 19.1
42
Heating Mode 71 71 71 72 72 69 69 65 77 19.1
Cooling Mode 72 71 68 69 66 62 57 53 71 19.1
48
Heating Mode 71 73 70 72 70 68 65 63 75 19.1
Cooling Mode 69 69 69 70 70 65 64 63 74 19.2
60
Heating Mode 68 69 68 69 71 65 63 62 74 19.0
Rated in accordance with ARI Standard 270.

571209-YTG-C-1012
TYPICAL INSTALLATION
MINIMUM 18” SERVICE

ACCESS CLEARANCE
60” OVERHEAD ON ONE SIDE THERMOSTAT
CLEARANCE
WEATHERPROOF
DISCONNECT
SWITCH
NEC CLASS 1 WIRING
NEC CLASS 2 WIRING
10” CLEARANCE TO FURNACE OR

AROUND PERIMETER AIR HANDLER
TERMINAL BLOCK
TO INDOOR COIL
NOTES:
ALL OUTDOOR WIRING MUST BE WEATHERPROOF. CONTROL
MINIMUM 24” UNIT TO UNIT CLEARANCE. ACCESS
SEAL OPENING(S) WITH
PANEL
PERMAGUM OR EQUIVALENT
TYPICAL FIELD WIRING
ALL FIELD WIRING TO BE IN ACCORDANCE WITH ELECTRIC CODE (NEC) AND/OR LOCAL CODES
THERMOSTAT INDOOR UNIT OUTDOOR UNIT
LOW VOLTAGE TERMINAL BLOCK 3,4 DEFROST
IN AIR HANDLER WITH ELECTRIC HEAT CONTROL
R R RED
R CONTACTOR
C BLK
B or C C
Y Y YEL T2 T1
Y
O O ORG M
O
WHT GND.
W W2 W L2 L1 SCREW
L or X PUR
X/L
G G BRN W1/66
1 FIELD
T
2
W1
INSTALLED
E
2
JUMPER BK
1 JUMPER TERMINALS E AND W TO HEAT DEHUMIDIFICATION CONTROL CONNECTION

(Humidistat* Jumper must be removed)
ON FIRST STAGE DURING EMERGENCY HEAT.
2 TERMINAL NOT USED ON ALL THERMOSTATS. GND. POWER WIRING
LUG 208/230-1-60
230-1-50
CIRCUIT
POWER WIRING
24V CONTROL WIRING BREAKER***
(NEC CLASS 2)
3 CHECK THE LOW VOLTAGE TERMINAL BLOCK ON THE INDOOR UNIT FOR THE ACTUAL ARRANGEMENT OF THE TERMINALS.
4 CONNECT POWER WIRING TO TERMINAL BLOCK 3TB ON UNITS WITHOUT ELECTRIC HEAT OR CIRCUIT BREAKER.

571209-YTG-C-1012
COOLING PERFORMANCE DATA

CONDENSING UNIT MODEL NO. YHJD18S41S2
INDOOR COIL MODEL NO. FC35
CONDENSING IDCFM 450 600 750
ENTERING AIR ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80
TEMPERATURE ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72
T.C. 16.8 18.5 18.8 20.3 21.7 18.9 19.4 19.9 21.3 22.3 21.0 20.3 20.9 22.2 22.9
65 S.C. 16.8 15.4 13.3 13.2 11.1 18.9 18.2 15.6 15.1 12.0 21.0 20.3 17.8 17.0 12.9
KW 1.00 1.00 1.00 1.00 1.00 1.10 1.10 1.10 1.10 1.10 1.20 1.20 1.20 1.20 1.20
T.C. 16.0 17.6 17.6 19.4 20.9 18.0 18.5 18.7 20.3 21.6 20.0 19.5 19.7 21.2 22.2
75 S.C. 16.0 14.9 12.8 12.8 10.6 18.0 17.6 15.0 14.7 11.6 20.0 19.5 17.3 16.7 12.6
KW 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.30 1.30 1.30 1.30 1.30
T.C. 15.2 16.6 16.5 18.5 20.1 17.1 17.7 17.5 19.4 20.8 19.0 18.8 18.5 20.2 21.5
85 S.C. 15.2 14.4 12.2 12.4 10.2 17.1 17.0 14.5 14.4 11.2 19.0 18.8 16.7 16.4 12.3
KW 1.30 1.30 1.30 1.30 1.30 1.40 1.40 1.40 1.40 1.40 1.50 1.50 1.50 1.50 1.50
T.C. 14.4 15.6 15.3 17.7 19.3 16.2 16.8 16.3 18.5 20.1 18.0 18.0 17.3 19.2 20.8
95 S.C. 14.4 13.9 11.7 11.9 9.7 16.2 16.3 13.9 14.0 10.8 18.0 18.0 16.2 16.1 11.9
KW 1.40 1.40 1.40 1.40 1.50 1.50 1.50 1.50 1.50 1.50 1.60 1.60 1.60 1.60 1.60
T.C. 13.5 14.2 14.1 16.2 18.0 15.2 15.6 15.0 17.0 18.7 16.9 16.9 15.8 17.8 19.4
105 S.C. 13.5 13.3 11.1 11.3 9.1 15.2 15.4 13.3 13.4 10.3 16.9 16.9 15.5 15.5 11.5
KW 1.60 1.60 1.60 1.60 1.60 1.70 1.70 1.70 1.70 1.70 1.80 1.80 1.70 1.80 1.80
T.C. 12.5 12.8 12.8 14.8 16.7 14.2 14.3 13.6 15.6 17.4 15.9 15.9 14.4 16.3 18.0
115 S.C. 12.5 12.6 10.5 10.7 8.6 14.2 14.3 12.7 12.8 9.8 15.9 15.9 14.4 14.9 11.0
KW 1.70 1.70 1.70 1.80 1.80 1.80 1.80 1.80 1.80 1.90 1.90 1.90 1.90 1.90 2.00
T.C. 11.5 11.4 11.6 13.4 15.5 13.2 13.1 12.2 14.1 16.0 14.8 14.8 12.9 14.9 16.6
125 S.C. 11.5 11.4 9.9 10.0 8.0 13.2 13.1 12.1 12.2 9.3 14.8 14.8 12.9 14.4 10.6
KW 1.90 1.90 1.90 1.90 2.00 2.00 2.00 2.00 2.00 2.00 2.10 2.10 2.10 2.10 2.10
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
Multipliers for determining the performance with other indoor sections.

NOTE: For dry bulb temperatures different than those listed (between 73-87 °F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
Air Handlers Coils T.C. S.C. KW

– FC/MC/PC18 0.97 0.96 1.02
– FC/MC/PC24 0.99 0.98 1.02
– FC/MC/PC30 0.99 0.98 1.02
– UC24 0.99 0.99 1.02
– UC30 0.99 0.99 1.02
AHE18B – 0.99 1.00 0.93
AHR18B – 0.98 1.01 1.01
AHV18B – 0.99 1.00 0.93
AV*24 – 1.01 1.01 0.92
MV12B FC/MC/PC18B 0.99 0.99 0.92
MV12B FC/MC24B 1.01 1.01 0.94
MV12B FC/MC30B 1.01 1.01 0.94
MX12B FC/MC/PC18B 0.99 0.99 0.91
MX12B FC/MC24B 1.03 1.06 0.91
MX12B FC/MC30B 1.03 1.06 0.91
Continued on next page.

571209-YTG-C-1012
Furnaces Coils T.C. S.C. KW Furnaces Coils T.C. S.C. KW

T*(8,L)V*A12 FC/MC/PC18A 0.99 0.98 0.93 T*9(C,V)*B12 UC18B 1.00 0.99 0.92
T*(8,L)V*A12 UC18A 0.99 0.99 0.93 T*9X*A10 FC/MC/PC18A 0.99 0.98 0.94
T*(8,L)V*B12 FC/MC/PC18B 0.99 0.98 0.92 T*9X*B12 FC/MC/PC18B 0.99 0.99 0.91
T*(8,L)V*B12 UC18B 1.00 0.99 0.92 T*9X*B12 UC18B 1.00 0.99 0.91
T*(8,L)V*B12 UC24B 1.02 1.01 0.91 T*9X*B12 UC24B 1.02 1.01 0.91
T*(8,L)V*B12 UC30B 1.02 1.01 0.91 T*9X*B12 UC30B 1.02 1.01 0.91
T*(8,L)X*A12 FC/MC/PC18A 0.98 0.95 0.91 Y*(8,L)C*A12 FC/MC/PC18A 0.99 0.98 0.93
T*(8,L)X*A12 UC18A 1.00 0.99 0.91 Y*(8,L)C*A12 UC18A 0.99 0.99 0.93
T*(8,L)X*A12 UC24A 1.01 1.01 0.91 Y*(8,L)C*A12 UC24A 1.02 1.05 0.93
T*(8,L)X*A12 UC30A 1.01 1.01 0.91 Y*(8,L)C*A12 UC30A 1.02 1.05 0.93
T*(8,L)X*B12 FC/MC/PC18B 0.99 0.99 0.91 Y*(8,L)C*B12 FC/MC/PC18B 0.99 0.98 0.92
T*(8,L)X*B12 UC18B 1.00 0.99 0.91 Y*(8,L)C*B12 UC18B 1.00 0.99 0.92
T*(8,L)X*B12 UC24B 1.02 1.01 0.91 Y*(8,L)C*B12 UC24B 1.02 1.01 0.91
T*(8,L)X*B12 UC30B 1.02 1.01 0.91 Y*(8,L)C*B12 UC30B 1.02 1.01 0.91
T*9V*A10 FC/MC/PC18A 0.98 0.97 0.94 Y*9C*B12 FC/MC/PC18B 0.99 0.98 0.92
T*9(C,V)*B12 FC/MC/PC18B 0.99 0.98 0.92 Y*9C*B12 UC18B 1.00 0.99 0.92

571209-YTG-C-1012

INDOOR COIL MODEL NO. AHP30
T.C. 22.6 25.9 25.9 28.3 29.4 25.2 27.1 26.8 29.2 30.4 27.9 28.3 27.6 30.0 31.4
65 S.C. 22.6 20.9 18.1 18.1 15.5 25.2 23.9 19.7 19.5 16.1 27.9 26.9 21.3 20.9 16.6
KW 1.60 1.60 1.60 1.70 1.70 1.70 1.70 1.70 1.70 1.70 1.80 1.80 1.80 1.80 1.80
T.C. 21.5 24.1 24.2 26.6 28.1 23.9 25.3 25.1 27.5 29.0 26.3 26.4 26.0 28.5 29.9
75 S.C. 21.5 20.1 17.3 17.3 14.7 23.9 22.8 19.1 18.9 15.4 26.3 25.6 20.9 20.6 16.1
KW 1.70 1.80 1.80 1.80 1.80 1.80 1.90 1.80 1.90 1.90 1.90 1.90 1.90 2.00 2.00
T.C. 20.4 22.3 22.4 24.8 26.8 22.6 23.4 23.4 25.9 27.6 24.7 24.5 24.4 26.9 28.4
85 S.C. 20.4 19.4 16.5 16.4 13.8 22.6 21.8 18.6 18.4 14.7 24.7 24.3 20.6 20.3 15.6
KW 1.90 1.90 1.90 1.90 1.90 2.00 2.00 2.00 2.00 2.00 2.10 2.10 2.10 2.10 2.10
T.C. 19.4 20.6 20.6 23.0 25.5 21.2 21.6 21.7 24.2 26.2 23.1 22.6 22.7 25.4 26.9
95 S.C. 19.4 18.6 15.7 15.6 13.0 21.2 20.8 18.0 17.8 14.0 23.1 22.6 20.2 20.0 15.1
KW 2.00 2.00 2.00 2.00 2.10 2.10 2.10 2.10 2.10 2.20 2.20 2.20 2.20 2.30 2.30
T.C. 17.6 18.0 18.0 20.9 23.5 19.4 19.5 18.9 21.9 24.3 21.3 21.0 19.9 23.0 25.1
105 S.C. 17.6 17.2 14.5 14.7 12.0 19.4 19.3 16.7 16.9 13.2 21.3 21.0 18.8 19.1 14.4
KW 2.10 2.10 2.10 2.20 2.20 2.20 2.20 2.20 2.30 2.30 2.30 2.30 2.30 2.40 2.40
T.C. 15.8 15.5 15.4 18.8 21.5 17.6 17.5 16.2 19.7 22.4 19.5 19.5 17.0 20.6 23.3
115 S.C. 15.8 15.5 13.3 13.9 11.1 17.6 17.5 15.3 16.0 12.4 19.5 19.5 17.0 18.2 13.7
KW 2.20 2.20 2.20 2.30 2.40 2.30 2.30 2.30 2.40 2.50 2.50 2.50 2.40 2.50 2.60
T.C. 13.9 13.0 12.7 16.6 19.5 15.8 15.5 13.4 17.4 20.5 17.7 17.9 14.1 18.2 21.5
125 S.C. 13.9 13.0 12.1 13.0 10.1 15.8 15.5 13.4 15.2 11.5 17.7 17.9 14.1 17.3 13.0
KW 2.30 2.20 2.20 2.40 2.50 2.40 2.40 2.40 2.50 2.60 2.60 2.60 2.50 2.60 2.70


– FC/MC/PC32 1.02 1.00 1.02
– FC/MC/PC35 1.02 1.00 1.02
– FC/MC/PC37 1.03 1.02 1.02
– FC/MC/PC43 1.03 1.02 1.02
AHE24B – 1.03 1.02 0.94
AHE30B – 1.03 1.02 0.94
AHR24B – 1.02 0.98 0.98
AHV24B – 1.02 0.97 0.93
AHV30B – 1.02 1.01 0.94
AHV36C – 1.03 1.02 0.93
AV*36 – 1.02 1.00 0.92
MV12B FC/MC35B 1.05 1.03 0.94
MV12B FC/MC43B 1.06 1.04 0.94
MX12B FC/MC35B 1.06 1.03 0.92
MX12B FC/MC43B 1.02 1.01 0.92

571209-YTG-C-1012

T*(8,L)V*A12 FC/MC/PC32A 1.02 0.99 0.94 T*9(C,V)*C20 FC/MC/PC43C 1.07 1.11 0.96
T*(8,L)V*A12 FC/MC/PC37A 1.06 1.04 0.94 T*9X*A10 FC/MC/PC32A 1.02 0.99 0.96
T*(8,L)V*B12 FC/MC/PC35B 1.05 1.02 0.94 T*9X*A10 FC/MC/PC37A 1.02 0.99 0.96
T*(8,L)V*C16 FC/MC/PC35C 1.05 1.03 0.93 T*9X*B12 FC/MC/PC43B 1.07 1.05 0.93
T*(8,L)V*C16 FC/MC/PC43C 1.07 1.04 0.93 T*9X*C16 FC/MC/PC35C 1.05 1.03 0.92
T*(8,L)X*A12 FC/MC/PC32A 1.05 1.03 0.92 T*9X*C20 FC/MC/PC43C 1.07 1.04 0.94
T*(8,L)X*B12 FC/MC/PC35B 1.05 1.06 0.92 Y*(8,L)C*A12 FC/MC/PC37A 1.06 1.04 0.94
T*(8,L)X*C16 FC/MC/PC35C 1.05 1.07 0.92 Y*(8,L)C*B12 FC/MC/PC43B 1.06 1.04 0.94
T*(8,L)X*C16 FC/MC/PC43C 1.08 1.10 0.93 Y*(8,L)C*C16 FC/MC/PC35C 1.05 1.03 0.93
T*9V*A10 FC/MC/PC32A 1.03 1.01 0.98 Y*(8,L)C*C20 FC/MC/PC43C 1.02 1.01 0.92
T*9(C,V)*B12 FC/MC/PC35B 1.04 1.02 0.95 Y*9C*B12 FC/MC/PC43B 1.06 1.04 0.95
T*9(C,V)*B12 FC/MC/PC43B 1.06 1.04 0.95 Y*9C*C16 FC/MC/PC35C 1.05 1.08 0.95
T*9(C,V)*C16 FC/MC/PC35C 1.05 1.08 0.95 Y*9C*C16 FC/MC/PC43C 1.06 1.04 0.94

571209-YTG-C-1012

T.C. 29.1 31.3 31.4 34.3 36.1 31.0 32.7 32.8 35.2 36.6 33.0 34.1 34.1 36.1 37.2
65 S.C. 28.0 24.7 21.2 21.0 17.8 29.9 27.9 23.3 22.4 18.2 31.8 31.1 25.4 23.8 18.6
KW 2.00 2.00 2.00 2.10 2.00 2.10 2.10 2.10 2.10 2.10 2.20 2.20 2.20 2.20 2.20
T.C. 27.4 29.1 29.2 32.3 34.3 29.3 30.4 30.4 33.2 34.9 31.3 31.6 31.6 34.0 35.5
75 S.C. 26.4 23.7 20.2 20.1 16.8 28.3 26.5 22.3 21.7 17.4 30.2 29.3 24.4 23.3 18.0
KW 2.10 2.20 2.20 2.20 2.20 2.20 2.30 2.30 2.30 2.30 2.30 2.40 2.30 2.30 2.30
T.C. 25.7 26.9 27.0 30.3 32.5 27.6 28.0 28.0 31.1 33.2 29.6 29.1 29.1 31.9 33.9
85 S.C. 24.8 22.7 19.2 19.3 15.8 26.6 25.1 21.3 21.0 16.6 28.5 27.5 23.3 22.7 17.3
KW 2.20 2.30 2.30 2.30 2.40 2.40 2.40 2.40 2.40 2.50 2.50 2.50 2.50 2.50 2.50
T.C. 24.0 24.7 24.7 28.2 30.8 25.9 25.7 25.7 29.1 31.5 27.8 26.7 26.6 29.9 32.2
95 S.C. 23.1 21.8 18.2 18.4 14.8 25.0 23.7 20.2 20.3 15.8 26.8 25.7 22.3 22.1 16.7
KW 2.40 2.40 2.40 2.50 2.50 2.50 2.50 2.50 2.60 2.60 2.60 2.60 2.60 2.70 2.70
T.C. 21.8 22.2 21.8 25.3 28.3 23.6 23.5 22.6 26.1 29.0 25.4 24.8 23.4 26.9 29.7
105 S.C. 21.0 20.4 17.0 17.3 13.8 22.8 22.2 18.9 19.2 14.8 24.5 24.0 20.9 21.1 15.8
KW 2.50 2.50 2.50 2.60 2.70 2.70 2.70 2.60 2.70 2.80 2.80 2.80 2.70 2.80 2.90
T.C. 19.7 19.6 19.0 22.3 25.8 21.4 21.3 19.6 23.2 26.5 23.0 23.0 20.2 24.0 27.1
115 S.C. 19.0 18.9 15.8 16.1 12.7 20.6 20.6 17.6 18.0 13.8 22.2 22.2 19.5 20.0 14.9
KW 2.70 2.70 2.70 2.70 2.80 2.80 2.80 2.80 2.90 2.90 2.90 2.90 2.90 3.00 3.10
T.C. 17.5 17.1 16.1 19.4 23.4 19.1 19.1 16.5 20.3 24.0 20.7 21.2 16.9 21.1 24.6
125 S.C. 16.9 17.1 14.6 14.9 11.7 18.4 19.0 16.3 16.9 12.8 19.9 20.4 16.9 18.9 13.9
KW 2.80 2.80 2.80 2.90 2.90 2.90 2.90 2.90 3.00 3.10 3.10 3.10 3.00 3.10 3.30


– FC/MC/PC32 1.00 1.05 1.00
– FC/MC/PC35 1.00 1.05 1.00
– FC/MC/PC37 1.02 1.07 1.00
– FC/MC/PC43 1.02 1.07 1.00
AHE30B – 1.02 1.06 0.94
AHE36C – 1.04 1.11 0.92
AHR30B – 1.02 1.11 1.01
AHR36B – 1.03 1.10 1.01
AHV30B – 1.02 1.07 0.96
AHV36C – 1.02 1.05 0.91
AV*36 – 1.04 1.09 0.91
MV12B FC/MC35B 1.02 1.07 0.92
MV12B FC/MC43B 1.04 1.09 0.93
MV16C FC/MC35C 1.04 1.12 0.92
MV16C FC/MC43C 1.04 1.09 0.93
MX12B FC/MC35B 1.03 1.12 0.93
MX12B FC/MC43B 1.05 1.15 0.94
MX16C FC/MC35C 1.03 1.08 0.90
MX16C FC/MC43C 1.05 1.10 0.91

571209-YTG-C-1012
Furnaces Coils T.C. S.C KW Furnaces Coils T.C. S.C KW

T*(8,L)V*A12 FC/MC/PC32A 1.01 1.05 0.99 T*9(C,V)*C20 FC/MC/PC43C 1.04 1.09 0.93
T*(8,L)V*A12 FC/MC/PC37A 1.02 1.06 0.95 T*9X*B12 FC/MC/PC35B 1.03 1.12 0.94
T*(8,L)V*B12 FC/MC/PC43B 1.04 1.09 0.96 T*9X*C16 FC/MC/PC35C 1.04 1.12 0.93
T*(8,L)V*C20 FC/MC/PC43C 1.04 1.10 0.91 Y*(8,L)C*A12 FC/MC/PC32A 1.01 1.05 0.99
T*(8,L)X*A12 FC/MC/PC37A 1.06 1.16 0.94 Y*(8,L)C*B12 FC/MC/PC35B 1.02 1.06 0.95
T*(8,L)X*B12 FC/MC/PC43B 1.06 1.17 0.94 Y*(8,L)C*C16 FC/MC/PC35C 1.02 1.07 0.93
T*(8,L)X*C20 FC/MC/PC43C 1.02 1.03 0.90 Y*9C*B12 FC/MC/PC35B 1.01 1.06 0.97
T*9(C,V)*B12 FC/MC/PC43B 1.03 1.08 0.96 Y*9C*C16 FC/MC/PC35C 1.02 1.07 0.94

571209-YTG-C-1012

T.C. 35.0 39.8 39.9 42.7 45.2 37.7 40.6 41.0 43.5 45.7 40.5 41.5 42.0 44.4 46.1
65 S.C. 34.9 32.4 27.9 27.1 22.7 37.7 35.4 29.9 28.6 23.2 40.4 38.5 31.8 30.2 23.8
KW 2.40 2.40 2.40 2.50 2.50 2.50 2.50 2.50 2.50 2.50 2.60 2.60 2.60 2.60 2.60
T.C. 33.3 36.8 36.9 39.9 42.9 35.7 37.6 37.9 40.8 43.4 38.1 38.5 38.9 41.8 43.9
75 S.C. 33.2 31.1 26.5 25.9 21.5 35.7 33.7 28.5 27.6 22.2 38.1 36.4 30.5 29.4 22.9
KW 2.60 2.60 2.60 2.70 2.70 2.70 2.70 2.70 2.70 2.80 2.80 2.80 2.80 2.80 2.80
T.C. 31.6 33.8 33.9 37.1 40.6 33.7 34.6 34.8 38.2 41.2 35.8 35.5 35.7 39.2 41.8
85 S.C. 31.5 29.7 25.1 24.8 20.2 33.6 32.1 27.2 26.7 21.1 35.7 34.4 29.2 28.5 22.0
KW 2.80 2.80 2.80 2.90 2.90 2.90 2.90 2.90 2.90 3.00 3.00 3.00 3.00 3.00 3.10
T.C. 29.9 30.8 30.8 34.3 38.4 31.7 31.6 31.7 35.5 39.0 33.5 32.5 32.6 36.6 39.6
95 S.C. 29.8 28.4 23.7 23.6 19.0 31.6 30.4 25.8 25.7 20.1 33.4 32.4 27.9 27.7 21.1
KW 2.90 2.90 3.00 3.10 3.10 3.00 3.10 3.10 3.10 3.20 3.20 3.20 3.20 3.20 3.30
T.C. 26.3 26.7 27.4 31.4 35.3 28.6 28.5 28.1 32.4 35.9 30.9 30.4 28.8 33.3 36.5
105 S.C. 26.3 25.5 22.3 22.4 17.8 28.6 27.9 24.3 24.5 18.9 30.9 30.4 26.3 26.5 20.0
KW 3.10 3.10 3.10 3.20 3.30 3.20 3.20 3.20 3.30 3.40 3.30 3.30 3.30 3.40 3.50
T.C. 22.8 22.6 24.1 28.5 32.2 25.6 25.5 24.5 29.2 32.8 28.4 28.4 25.0 30.0 33.5
115 S.C. 22.8 22.5 20.8 21.3 16.6 25.5 25.4 22.8 23.3 17.8 28.3 28.3 24.8 25.3 18.9
KW 3.20 3.20 3.20 3.40 3.50 3.40 3.40 3.30 3.50 3.60 3.50 3.50 3.40 3.60 3.60
T.C. 19.3 18.4 20.7 25.6 29.1 22.5 22.4 20.9 26.1 29.8 25.8 26.4 21.2 26.7 30.4
125 S.C. 19.2 18.4 19.3 20.1 15.4 22.5 22.4 20.9 22.1 16.6 25.8 26.3 21.2 24.0 17.8
KW 3.40 3.40 3.30 3.50 3.70 3.60 3.50 3.50 3.60 3.70 3.70 3.70 3.60 3.80 3.80


– FC/MC/PC37 1.03 1.02 1.02
– FC/MC/PC43 1.03 1.02 1.02
– FC/MC/PC48 1.03 1.03 1.02
– UC48 1.04 1.03 1.02
AHE36C – 1.05 1.04 0.96
AHE42D – 1.05 1.05 0.94
AHR36B – 1.04 1.04 1.02
AHR42C – 1.04 1.04 1.01
AHV36C – 1.04 1.04 0.97
AHV42D – 1.05 1.05 0.95
AV*36 – 1.05 1.04 0.96
MV12B FC/MC43B 1.04 1.04 0.97
MV12D FC/MC48D 1.06 1.05 0.93
MV16C FC/MC43C 1.05 1.04 0.96
MV16C FC/MC48C 1.05 1.05 0.95
MX12B FC/MC43B 1.04 1.04 0.97
MX12D FC/MC48D 1.05 1.05 0.95
MX16C FC/MC43C 1.05 1.04 0.94
MX16C FC/MC48C 1.06 1.05 0.93

571209-YTG-C-1012

T*(8,L)V*A12 FC/MC/PC37A 1.03 1.03 1.00 T*9X*C16 FC/MC/PC43C 1.05 1.07 0.97
T*(8,L)V*C16 FC/MC/PC43C 1.04 1.04 0.96 T*9X*C16 UC48C 1.07 1.09 0.97
T*(8,L)V*C16 UC48C 1.05 1.05 0.96 T*9X*C20 FC/MC/PC48C 1.05 1.05 0.95
T*(8,L)V*C20 FC/MC/PC48C 1.05 1.05 0.95 T*9X*D20 FC/MC/PC48D 1.05 1.05 0.95
T*(8,L)V*C20 UC48C 1.06 1.05 0.95 T*9X*D20 UC48D 1.06 1.05 0.95
T*(8,L)X*C16 UC48C 1.06 1.06 0.93 Y*(8,L)C*C16 UC48C 1.05 1.05 0.96
T*(8,L)X*C20 UC48C 1.07 1.10 0.94 Y*(8,L)C*C20 UC48C 1.06 1.05 0.95
T*9(C,V)*C16 UC48C 1.05 1.04 0.97 Y*9C*C16 UC48C 1.05 1.04 0.97
T*9(C,V)*C20 UC48C 1.07 1.10 1.00 Y*9C*C20 UC48C 1.07 1.10 1.00
T*9(C,V)*D20 FC/MC/PC48D 1.05 1.04 0.96 Y*9C*D20 FC/MC/PC48D 1.05 1.04 0.96
T*9(C,V)*D20 UC48D 1.05 1.04 0.97 Y*9C*D20 UC48D 1.05 1.04 0.97
T*9X*B12 FC/MC/PC43B 1.05 1.07 0.97

571209-YTG-C-1012

T.C. 42.5 44.2 45.0 49.4 52.7 44.4 45.8 46.4 50.5 53.5 46.4 47.4 47.7 51.5 54.4
65 S.C. 42.5 38.4 32.9 32.8 26.7 44.4 42.2 35.3 34.7 27.6 46.4 46.0 37.6 36.7 28.6
KW 2.70 2.80 2.80 2.80 2.90 2.80 2.80 2.90 2.90 2.90 2.90 2.90 2.90 3.00 3.00
T.C. 39.9 40.7 41.7 46.3 49.8 41.8 42.3 42.9 47.2 50.6 43.7 43.9 44.1 48.1 51.3
75 S.C. 39.9 36.8 31.4 31.4 25.4 41.8 40.0 33.7 33.3 26.4 43.7 43.2 36.0 35.3 27.4
KW 2.90 2.90 2.90 3.00 3.10 3.00 3.00 3.00 3.10 3.10 3.10 3.10 3.10 3.20 3.20
T.C. 37.4 37.3 38.4 43.2 47.0 39.2 38.8 39.5 44.0 47.6 41.0 40.4 40.6 44.8 48.3
85 S.C. 37.4 35.1 29.8 29.9 24.1 39.2 37.8 32.1 32.0 25.1 41.0 40.4 34.4 34.0 26.1
KW 3.10 3.10 3.10 3.20 3.30 3.20 3.20 3.20 3.30 3.30 3.30 3.30 3.30 3.40 3.40
T.C. 34.8 33.9 35.0 40.1 44.1 36.6 35.4 36.0 40.7 44.7 38.3 36.8 37.0 41.4 45.3
95 S.C. 34.8 33.4 28.3 28.5 22.8 36.6 35.4 30.6 29.9 23.8 38.3 36.8 32.8 32.6 24.8
KW 3.30 3.30 3.30 3.40 3.50 3.40 3.40 3.40 3.50 3.50 3.50 3.50 3.50 3.60 3.60
T.C. 31.6 31.2 30.9 36.1 40.5 33.4 32.8 31.7 37.1 41.2 35.3 34.5 32.6 38.0 42.0
105 S.C. 31.6 31.2 26.5 26.9 21.3 33.4 32.8 28.6 29.1 22.4 35.3 34.5 30.8 31.3 23.6
KW 3.50 3.50 3.50 3.60 3.70 3.60 3.60 3.60 3.70 3.80 3.80 3.70 3.70 3.80 3.90
T.C. 28.3 28.5 26.7 32.1 36.9 30.3 30.3 27.4 33.4 37.8 32.2 32.1 28.1 34.7 38.6
115 S.C. 28.3 28.5 24.6 25.3 19.7 30.3 30.3 26.7 27.6 21.0 32.2 32.1 28.1 29.9 22.4
KW 3.70 3.70 3.60 3.80 3.90 3.80 3.80 3.70 3.90 4.00 4.00 4.00 3.80 4.00 4.10
T.C. 25.1 25.8 22.6 28.1 33.3 27.1 27.8 23.1 29.7 34.3 29.1 29.7 23.7 31.3 35.3
125 S.C. 25.1 25.8 22.6 23.6 18.1 27.1 27.8 23.1 26.1 19.6 29.1 29.7 23.7 28.6 21.2
KW 3.90 3.90 3.80 4.00 4.20 4.00 4.00 3.90 4.10 4.30 4.20 4.20 4.00 4.20 4.40

Air Handlers Coils T.C. S.C. KW Furnaces Coils T.C. S.C. KW

– FC/MC/PC60 0.96 0.99 1.01 T*9(C,V)*C16 UC60C 0.96 0.99 1.00
– UC60 0.96 0.98 1.02 T*9(C,V)*C20 FC/PC60C 0.97 1.00 0.99
AHE48D – 0.98 1.01 0.94 T*9(C,V)*C20 UC60C 0.97 0.99 0.99
AHR48D – 0.96 0.96 1.01 T*9(C,V)*D20 FC/MC/PC60D 0.97 1.00 0.98
AHV48D – 0.97 0.97 0.96 T*9(C,V)*D20 UC60D 0.97 1.00 0.98
AV*48 – 0.98 1.01 0.94 T*9X*C16 FC/PC60C 1.00 1.04 0.97
AV*60 – 0.98 1.01 0.94 T*9X*C16 UC60C 0.97 1.00 0.96
MV16C FC60C 0.98 1.00 0.97 T*9X*C20 FC/PC60C 1.00 1.05 0.96
MV20D FC/MC60D 0.98 1.00 0.96 T*9X*C20 UC60C 0.98 1.00 0.96
MX16C FC60C 0.98 1.01 0.94 T*9X*D20 FC/MC/PC60D 1.01 1.08 0.95
MX20D FC/MC60D 1.01 1.06 0.94 T*9X*D20 UC60D 1.00 1.05 0.95
Y*(8,L)C*C16 FC/PC60C 0.97 1.00 0.98
Furnaces Coils T.C. S.C. KW Y*(8,L)C*C16 UC60C 0.97 1.00 0.97
T*(8,L)V*C16 FC/PC60C 0.97 1.00 0.98 Y*(8,L)C*C20 FC/PC60C 0.98 1.00 0.96
T*(8,L)V*C16 UC60C 0.97 1.00 0.97 Y*(8,L)C*C20 UC60C 0.97 1.00 0.96
T*(8,L)V*C20 FC/PC60C 0.98 1.00 0.96 Y*9C*C16 FC/PC60C 0.97 0.99 1.01
T*(8,L)V*C20 UC60C 0.97 1.00 0.96 Y*9C*C16 UC60C 0.96 0.99 1.00
T*(8,L)X*C16 FC/PC60C 0.98 1.01 0.94 Y*9C*C20 FC/PC60C 0.97 1.00 0.99
T*(8,L)X*C16 UC60C 0.98 1.01 0.94 Y*9C*C20 UC60C 0.97 0.99 0.99
T*(8,L)X*C20 FC/PC60C 1.01 1.06 0.96 Y*9C*D20 FC/MC/PC60D 0.97 1.00 0.98
T*(8,L)X*C20 UC60C 0.98 1.04 0.95 Y*9C*D20 UC60D 0.97 1.00 0.98
T*9(C,V)*C16 FC/PC60C 0.97 0.99 1.01

571209-YTG-C-1012

T.C. 47.6 50.1 49.8 54.1 60.7 49.4 50.8 51.0 55.8 61.9 51.2 51.5 52.2 57.5 63.1
65 S.C. 47.6 44.7 37.8 37.0 30.4 49.4 48.3 39.9 39.3 31.5 51.2 51.5 42.0 41.6 32.6
KW 2.90 2.90 2.90 3.00 3.00 3.00 3.00 3.00 3.00 3.10 3.10 3.10 3.10 3.10 3.20
T.C. 45.1 46.6 46.5 50.8 56.9 46.7 47.2 47.5 52.2 58.0 48.4 47.9 48.5 53.6 59.0
75 S.C. 45.1 43.1 36.2 35.6 28.9 46.7 45.8 38.3 37.8 30.0 48.4 47.9 40.3 40.0 31.1
KW 3.20 3.20 3.20 3.20 3.30 3.20 3.20 3.20 3.30 3.30 3.30 3.30 3.30 3.40 3.40
T.C. 42.5 43.1 43.2 47.5 53.2 44.1 43.7 44.0 48.6 54.1 45.6 44.3 44.7 49.7 55.0
85 S.C. 42.5 41.5 34.7 34.2 27.3 44.1 43.3 36.7 36.2 28.4 45.6 44.3 38.7 38.3 29.6
KW 3.40 3.40 3.40 3.50 3.50 3.50 3.50 3.50 3.50 3.60 3.60 3.60 3.60 3.60 3.70
T.C. 40.0 39.6 39.9 44.2 49.4 41.4 40.2 40.4 45.0 50.2 42.8 40.7 41.0 45.8 51.0
95 S.C. 40.0 39.6 33.1 32.7 25.8 41.4 40.2 35.0 34.7 26.9 42.8 40.7 37.0 36.6 28.0
KW 3.60 3.60 3.60 3.70 3.80 3.70 3.70 3.70 3.80 3.90 3.80 3.80 3.80 3.90 4.00
T.C. 37.2 37.1 36.3 40.6 45.3 38.5 37.8 36.8 41.1 45.9 39.7 38.6 37.2 41.7 46.6
105 S.C. 37.2 37.1 31.6 31.3 24.2 38.5 37.8 33.5 33.2 25.2 39.7 38.6 35.4 35.1 26.3
KW 3.90 3.90 3.90 4.00 4.10 4.00 4.00 3.90 4.00 4.20 4.10 4.10 4.00 4.10 4.20
T.C. 34.5 34.5 32.8 36.9 41.1 35.5 35.5 33.1 37.2 41.6 36.6 36.4 33.5 37.6 42.1
115 S.C. 34.5 34.5 30.0 29.8 22.5 35.5 35.5 31.9 31.7 23.6 36.6 36.4 33.5 33.5 24.6
KW 4.10 4.10 4.10 4.20 4.30 4.20 4.20 4.20 4.30 4.40 4.40 4.40 4.30 4.40 4.50
T.C. 31.7 31.9 29.3 33.2 37.0 32.6 33.1 29.5 33.3 37.3 33.5 34.2 29.7 33.4 37.7
125 S.C. 31.7 31.9 28.5 28.3 20.9 32.6 33.1 29.5 30.1 21.9 33.5 34.2 29.7 31.9 22.9
KW 4.40 4.40 4.30 4.50 4.60 4.50 4.50 4.40 4.50 4.70 4.60 4.60 4.50 4.60 4.80


– FC/MC/PC60 0.98 0.97 0.98
– FC/MC62 0.99 0.98 0.98
– UC60 0.97 0.95 0.97
AHE48D – 0.99 0.97 0.93
AHE60D – 1.00 0.99 0.92
AHR48D – 0.98 0.95 0.98
AHR60D – 0.98 0.97 0.97
AHV48D – 0.99 0.96 0.94
AHV60D – 0.99 0.99 0.94
AV*48 – 0.99 0.99 0.93
AV*60 – 1.00 0.99 0.93
MV16C FC60C 0.99 0.99 0.94
MV20D FC/MC60D 0.99 0.99 0.94
MV20D FC/MC62D 1.00 0.99 0.93
MX16C FC60C 1.00 0.99 0.92
MX20D FC/MC60D 1.00 1.00 0.91
MX20D FC/MC62D 1.01 1.00 0.91

571209-YTG-C-1012

T*(8,L)V*C16 FC/MC62D 0.99 0.99 0.95 T*9X*C16 UC60C 0.98 0.96 0.94
T*(8,L)V*C16 FC/PC60C 0.98 0.98 0.96 T*9X*C20 FC/MC62D 1.00 0.99 0.94
T*(8,L)V*C16 UC60C 0.98 0.95 0.96 T*9X*C20 FC/PC60C 0.99 0.99 0.94
T*(8,L)V*C20 FC/MC62D 1.00 0.99 0.95 T*9X*C20 UC60C 0.99 0.96 0.94
T*(8,L)V*C20 FC/PC60C 0.99 0.98 0.96 T*9X*D20 FC/MC/PC60D 1.00 0.96 0.90
T*(8,L)V*C20 UC60C 0.98 0.96 0.94 T*9X*D20 FC/MC62D 1.00 0.99 0.95
T*(8,L)X*C16 FC/MC62D 1.00 0.99 0.95 T*9X*D20 UC60D 0.98 0.95 0.89
T*(8,L)X*C16 FC/PC60C 0.99 0.99 0.94 Y*(8,L)C*C16 FC/MC62D 0.99 0.99 0.95
T*(8,L)X*C16 UC60C 0.98 0.96 0.94 Y*(8,L)C*C16 FC/PC60C 0.98 0.98 0.96
T*(8,L)X*C20 FC/MC62D 1.00 0.99 0.94 Y*(8,L)C*C16 UC60C 0.98 0.95 0.96
T*(8,L)X*C20 FC/PC60C 0.99 0.99 0.94 Y*(8,L)C*C20 FC/MC62D 1.00 0.99 0.95
T*(8,L)X*C20 UC60C 1.00 0.97 0.90 Y*(8,L)C*C20 FC/PC60C 0.99 0.98 0.96
T*9(C,V)*C16 FC/MC62D 0.99 0.99 0.96 Y*(8,L)C*C20 UC60C 0.98 0.96 0.94
T*9(C,V)*C16 FC/PC60C 0.98 0.98 0.97 Y*9C*C16 FC/MC62D 0.99 0.99 0.96
T*9(C,V)*C16 UC60C 0.98 0.95 0.97 Y*9C*C16 FC/PC60C 0.98 0.98 0.97
T*9(C,V)*C20 FC/MC62D 0.99 0.98 0.98 Y*9C*C16 UC60C 0.98 0.95 0.97
T*9(C,V)*C20 FC/PC60C 0.98 0.97 0.97 Y*9C*C20 FC/MC62D 0.99 0.98 0.98
T*9(C,V)*C20 UC60C 0.98 0.95 0.97 Y*9C*C20 FC/PC60C 0.98 0.97 0.97
T*9(C,V)*D20 FC/MC/PC60D 0.99 0.98 0.97 Y*9C*C20 UC60C 0.98 0.95 0.97
T*9(C,V)*D20 FC/MC62D 0.99 0.98 0.96 Y*9C*D20 FC/MC/PC60D 0.99 0.98 0.97
T*9(C,V)*D20 UC60D 0.98 0.95 0.96 Y*9C*D20 FC/MC62D 0.99 0.98 0.96
T*9X*C16 FC/MC62D 1.00 0.99 0.95 Y*9C*D20 UC60D 0.98 0.95 0.96
T*9X*C16 FC/PC60C 0.99 0.99 0.95

571209-YTG-C-1012

INDOOR COIL MODEL NO. AHX60
T.C. 57.5 60.5 60.5 66.0 72.0 59.4 61.6 61.6 67.1 73.0 61.2 62.7 62.6 68.2 74.0
65 S.C. 57.1 52.5 44.9 44.2 35.6 58.9 55.6 46.8 46.2 36.7 60.8 58.6 48.8 48.2 37.7
KW 3.59 3.62 3.62 3.68 3.75 3.68 3.70 3.71 3.76 3.83 3.78 3.79 3.79 3.85 3.92
T.C. 55.4 57.7 57.7 63.0 68.8 57.1 58.6 58.6 64.0 69.7 58.8 59.6 59.5 65.0 70.7
75 S.C. 55.0 51.3 43.6 42.9 34.2 56.7 54.0 45.5 44.9 35.3 58.4 56.8 47.4 46.8 36.4
KW 4.02 4.05 4.05 4.11 4.18 4.11 4.13 4.13 4.19 4.27 4.21 4.22 4.21 4.28 4.36
T.C. 53.3 54.8 54.9 60.1 65.6 54.9 55.7 55.6 61.0 66.5 56.5 56.5 56.3 61.8 67.4
85 S.C. 52.9 50.0 42.2 41.6 32.8 54.5 52.5 44.1 43.6 33.9 56.1 54.9 46.1 45.5 35.0
KW 4.45 4.47 4.47 4.54 4.61 4.55 4.56 4.56 4.62 4.70 4.64 4.64 4.64 4.71 4.79
T.C. 51.2 51.9 52.0 57.1 62.4 52.6 52.7 52.6 57.9 63.2 54.1 53.5 53.1 58.6 64.0
95 S.C. 50.8 48.8 40.9 40.4 31.4 52.3 50.9 42.8 42.2 32.5 53.7 53.1 44.7 44.1 33.7
KW 4.89 4.90 4.90 4.97 5.05 4.98 4.98 4.98 5.06 5.14 5.07 5.07 5.06 5.14 5.23
T.C. 48.5 48.3 48.6 53.4 58.5 49.8 49.5 49.1 54.0 59.1 51.2 50.6 49.5 54.6 59.7
105 S.C. 48.1 46.6 39.4 38.8 29.9 49.5 48.4 41.3 40.7 31.0 50.8 50.2 43.1 42.6 32.1
KW 5.43 5.42 5.43 5.50 5.58 5.52 5.52 5.51 5.59 5.67 5.62 5.62 5.60 5.68 5.76
T.C. 45.8 44.8 45.2 49.6 54.6 47.0 46.3 45.5 50.1 55.0 48.3 47.7 45.9 50.6 55.5
115 S.C. 45.5 44.5 37.9 37.3 28.5 46.7 45.9 39.7 39.2 29.5 47.9 47.4 41.6 41.1 30.5
KW 5.97 5.95 5.97 6.04 6.12 6.07 6.06 6.05 6.12 6.21 6.17 6.16 6.13 6.21 6.29
T.C. 43.1 41.2 41.7 45.9 50.7 44.2 43.0 42.0 46.2 50.9 45.4 44.9 42.3 46.5 51.2
125 S.C. 42.8 41.2 36.3 35.7 27.0 43.9 43.0 38.2 37.6 28.0 45.0 44.5 40.0 39.5 28.9
KW 6.51 6.48 6.50 6.57 6.65 6.62 6.59 6.58 6.66 6.74 6.72 6.71 6.66 6.74 6.82

Air Handlers Coils T.C. S.C. KW Furnaces Coils T.C. S.C. KW

– FC/MC62 0.99 0.97 0.96 T*(8,L)V*C20 FC/MC62D 0.98 0.93 0.94
– FC64 0.98 1.01 0.99 T*(8,L)V*C20 FC64D 0.98 1.01 0.98
AHE60D – 1.01 0.97 0.94 T*(8,L)X*C20 FC/MC62D 0.99 0.95 0.91
AHR60D – 1.00 1.00 1.00 T*(8,L)X*C20 FC64D 0.97 0.97 0.93
AHV60D – 0.99 0.92 0.93 T*9(C,V)*C20 FC/MC62D 0.98 0.93 0.94
MV20D FC/MC62D 1.00 0.98 0.94 T*9(C,V)*C20 FC64D 0.96 0.96 0.95
MV20D FC64D 0.98 1.02 0.97 T*9(C,V)*D20 FC/MC62D 0.99 0.93 0.94
MX20D FC/MC62D 1.01 0.97 0.93 T*9(C,V)*D20 FC64D 0.96 0.95 0.95
MX20D FC64D 0.98 1.01 0.94 T*9X*C20 FC/MC62D 0.99 0.95 0.91
T*9X*C20 FC64D 0.96 0.95 0.93
T*9X*D20 FC/MC62D 0.99 0.95 0.92
T*9X*D20 FC64D 0.97 0.96 0.94
Y*(8,L)C*C20 FC/MC62D 0.98 0.93 0.94
Y*(8,L)C*C20 FC64D 0.98 1.01 0.98
Y*9C*C20 FC/MC62D 0.98 0.93 0.94
Y*9C*C20 FC64D 0.96 0.96 0.96
Y*9C*D20 FC/MC62D 0.99 0.93 0.94
Y*9C*D20 FC64D 0.96 0.95 0.95

571209-YTG-C-1012
HEATING PERFORMANCE DATA

CONDENSING UNIT MODEL NO YHJD18S41S2
EVAPORATOR COIL MODEL NO FC35
AIR TEMP. AIR TEMP. ID CFM
ENTERING ENTERING 450 600 750
OUTDOOR UNIT INDOOR COIL MBH COP KW MBH COP KW MBH COP KW
60 21.1 4.1 1.50 22.2 4.5 1.44 23.3 4.9 1.39
60 70 20.5 3.6 1.65 21.6 4.0 1.59 22.6 4.3 1.53
80 19.9 3.2 1.81 20.9 3.5 1.74 21.9 3.9 1.66
60 18.6 3.8 1.45 19.2 4.0 1.41 19.8 4.2 1.38
47 70 17.7 3.3 1.60 18.4 3.5 1.55 19.1 3.7 1.51
80 16.8 2.8 1.74 17.6 3.1 1.69 18.4 3.3 1.64
60 16.7 3.4 1.43 17.3 3.6 1.40 17.9 3.8 1.37
40 70 16.1 3.0 1.57 16.8 3.2 1.53 17.4 3.4 1.50
80 15.6 2.7 1.70 16.3 2.9 1.66 17.0 3.1 1.62
60 14.6 3.1 1.39 15.1 3.2 1.37 15.5 3.4 1.36
30 70 14.2 2.7 1.52 14.6 2.9 1.50 15.0 3.0 1.48
80 13.7 2.4 1.66 14.1 2.5 1.63 14.4 2.6 1.61
60 11.7 2.6 1.34 12.0 2.6 1.34 12.3 2.7 1.34
17 70 11.2 2.2 1.48 11.6 2.3 1.47 11.9 2.4 1.46
80 10.8 2.0 1.62 11.1 2.0 1.60 11.5 2.1 1.58
60 10.1 2.3 1.31 10.3 2.3 1.31 10.4 2.3 1.32
10 70 9.6 1.9 1.45 9.9 2.0 1.44 10.2 2.1 1.44
80 9.1 1.7 1.59 9.5 1.8 1.58 9.9 1.9 1.57
NOTE: ALL CAPACITIES ARE NET, WITH INDOOR FAN HEAT ALREADY DEDUCTED. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
Air Handlers Coils MBH COP KW

– FC/MC/PC18 1.05 0.94 1.13
– FC/MC/PC24 1.06 0.98 1.08
– FC/MC/PC30 1.06 0.98 1.08
– UC24 1.05 0.98 1.08
– UC30 1.05 0.98 1.08
AHE18B – 1.03 1.01 1.02
AHR18B – 1.05 0.97 1.09
AHV18B – 1.03 1.00 1.03
AV*24 – 1.03 1.03 1.00
MV12B FC/MC/PC18B 1.03 1.01 1.02
MV12B FC/MC24B 1.04 1.03 1.00
MV12B FC/MC30B 1.04 1.03 1.00
MX12B FC/MC/PC18B 1.03 1.01 1.02
MX12B FC/MC24B 1.03 1.08 0.96
MX12B FC/MC30B 1.03 1.08 0.96

571209-YTG-C-1012
Furnaces Coils MBH COP KW Furnaces Coils MBH COP KW

T*(8,L)V*B12 UC18B 1.04 1.02 1.01 T*9X*B12 UC18B 1.03 1.03 1.00
T*(8,L)V*B12 UC24B 1.03 1.06 0.97 T*9X*B12 UC24B 1.03 1.06 0.97
T*(8,L)V*B12 UC30B 1.03 1.06 0.97 T*9X*B12 UC30B 1.03 1.06 0.97
T*(8,L)X*A12 UC18A 1.03 1.03 1.00 Y*(8,L)C*A12 UC18A 1.04 1.02 1.02
T*(8,L)X*A12 UC24A 1.03 1.05 0.98 Y*(8,L)C*A12 UC24A 1.04 1.06 0.98
T*(8,L)X*A12 UC30A 1.03 1.05 0.98 Y*(8,L)C*A12 UC30A 1.04 1.06 0.98
T*(8,L)X*B12 UC18B 1.03 1.03 1.00 Y*(8,L)C*B12 UC18B 1.04 1.02 1.01
T*(8,L)X*B12 UC24B 1.03 1.06 0.97 Y*(8,L)C*B12 UC24B 1.03 1.06 0.97
T*(8,L)X*B12 UC30B 1.03 1.06 0.97 Y*(8,L)C*B12 UC30B 1.03 1.06 0.97

571209-YTG-C-1012

EVAPORATOR COIL MODEL NO AHP30
60 28.3 3.8 2.20 27.5 3.7 2.15 26.7 3.7 2.10
60 70 27.5 3.5 2.27 26.9 3.5 2.23 26.4 3.5 2.19
80 26.7 3.3 2.35 26.3 3.3 2.32 26.0 3.3 2.28
60 24.9 3.6 2.03 24.5 3.6 2.01 24.1 3.6 1.98
47 70 23.8 3.4 2.08 24.0 3.4 2.06 24.1 3.4 2.10
80 22.7 3.1 2.14 23.4 3.2 2.15 24.1 3.3 2.17
60 23.1 3.5 1.94 22.7 3.5 1.93 22.4 3.4 1.92
40 70 21.9 3.2 1.98 22.0 3.2 1.99 22.0 3.2 1.99
80 20.7 3.0 2.03 21.2 3.0 2.05 21.7 3.1 2.07
60 19.0 3.1 1.79 19.6 3.2 1.82 20.1 3.2 1.84
30 70 17.7 2.8 1.83 18.6 2.9 1.87 19.4 3.0 1.90
80 16.4 2.6 1.87 17.6 2.7 1.92 18.7 2.8 1.96
60 13.8 2.5 1.64 13.9 2.4 1.73 14.1 2.3 1.83
17 70 13.3 2.4 1.65 13.8 2.3 1.73 14.3 2.3 1.82
80 12.5 2.2 1.68 13.4 2.2 1.75 14.3 2.3 1.81
60 12.7 2.4 1.58 11.1 2.0 1.61 9.5 1.7 1.64
10 70 11.1 2.0 1.59 10.7 1.9 1.64 10.3 1.8 1.69
80 9.4 1.7 1.61 10.2 1.8 1.68 11.1 1.9 1.75

Air Handlers Coils MBH COP KW Furnaces Coils MBH COP KW
– FC/MC/PC32 1.00 1.00 1.00 T*(8,L)X*C20 FC/MC/PC43C 0.98 1.08 0.90
– FC/MC/PC35 1.00 1.00 1.00 T*9V*A10 FC/MC/PC32A 0.98 1.02 0.96
– FC/MC/PC37 1.01 1.01 1.00 T*9V*A10 FC/MC/PC37A 0.99 1.04 0.96
– FC/MC/PC43 1.01 1.01 1.00 T*9(C,V)*B12 FC/MC/PC35B 0.98 1.04 0.94
AHE24B – 0.97 1.05 0.92 T*9(C,V)*B12 FC/MC/PC43B 0.98 1.06 0.92
AHE30B – 0.97 1.05 0.92 T*9(C,V)*C16 FC/MC/PC35C 0.98 1.06 0.93
AHR24B – 0.97 0.99 0.97 T*9(C,V)*C16 FC/MC/PC43C 0.98 1.07 0.92
AHV24B – 0.94 1.02 0.93 T*9(C,V)*C20 FC/MC/PC35C 0.95 1.03 0.92
AHV36C – 0.98 1.07 0.91 T*9X*A10 FC/MC/PC32A 0.96 1.01 0.95
AV*36 – 0.96 1.06 0.90 T*9X*A10 FC/MC/PC37A 0.98 1.04 0.94
MV12B FC/MC35B 0.98 1.06 0.92 T*9X*B12 FC/MC/PC35B 0.98 1.07 0.91
MX12B FC/MC35B 0.97 1.08 0.90 T*9X*C16 FC/MC/PC35C 0.98 1.07 0.91
T*9X*C20 FC/MC/PC35C 0.98 1.06 0.92
Furnaces Coils MBH COP KW T*9X*C20 FC/MC/PC43C 0.98 1.08 0.90
T*(8,L)V*A12 FC/MC/PC32A 0.96 1.03 0.93 Y*(8,L)C*A12 FC/MC/PC32A 0.96 1.03 0.93
T*(8,L)V*A12 FC/MC/PC37A 0.98 1.07 0.92 Y*(8,L)C*A12 FC/MC/PC37A 0.98 1.07 0.92
T*(8,L)V*B12 FC/MC/PC35B 0.98 1.05 0.93 Y*(8,L)C*B12 FC/MC/PC35B 0.98 1.05 0.93
T*(8,L)V*B12 FC/MC/PC43B 0.98 1.07 0.92 Y*(8,L)C*B12 FC/MC/PC43B 0.98 1.07 0.92
T*(8,L)V*C16 FC/MC/PC35C 0.98 1.06 0.92 Y*(8,L)C*C16 FC/MC/PC35C 0.98 1.06 0.92
T*(8,L)X*A12 FC/MC/PC32A 0.98 1.07 0.91 Y*9C*B12 FC/MC/PC35B 0.98 1.04 0.94
T*(8,L)X*A12 FC/MC/PC37A 0.98 1.11 0.89 Y*9C*B12 FC/MC/PC43B 0.98 1.06 0.92
T*(8,L)X*B12 FC/MC/PC35B 0.97 1.07 0.90 Y*9C*C16 FC/MC/PC35C 0.98 1.06 0.93
T*(8,L)X*B12 FC/MC/PC43B 0.98 1.11 0.89 Y*9C*C16 FC/MC/PC43C 0.98 1.07 0.92
T*(8,L)X*C16 FC/MC/PC35C 0.97 1.08 0.90 Y*9C*C20 FC/MC/PC35C 0.95 1.03 0.92
T*(8,L)X*C16 FC/MC/PC43C 0.98 1.11 0.89 Y*9C*C20 FC/MC/PC43C 1.00 1.09 0.92
T*(8,L)X*C20 FC/MC/PC35C 0.98 1.07 0.91

571209-YTG-C-1012

60 32.2 3.7 2.52 31.2 3.7 2.47 30.2 3.7 2.41
60 70 31.6 3.5 2.64 30.9 3.5 2.60 30.2 3.5 2.56
80 30.9 3.3 2.77 30.5 3.3 2.73 30.2 3.3 2.70
60 28.9 3.6 2.35 28.3 3.6 2.33 27.7 3.5 2.31
47 70 27.9 3.4 2.43 27.6 3.3 2.45 27.3 3.2 2.47
80 26.9 3.1 2.51 26.9 3.1 2.51 26.9 3.1 2.50
60 26.7 3.5 2.25 26.5 3.4 2.25 26.3 3.4 2.26
40 70 25.6 3.2 2.32 25.6 3.2 2.33 25.6 3.2 2.34
80 24.4 3.0 2.39 24.7 3.0 2.41 24.9 3.0 2.43
60 23.2 3.3 2.08 23.4 3.3 2.11 23.5 3.2 2.13
30 70 21.3 2.9 2.16 21.8 2.9 2.18 22.3 3.0 2.20
80 19.4 2.6 2.23 20.3 2.6 2.25 21.1 2.7 2.26
60 17.3 2.6 1.92 17.8 2.7 1.95 18.4 2.7 1.99
17 70 15.4 2.3 1.97 16.1 2.3 2.04 16.8 2.3 2.12
80 12.7 1.9 2.00 13.6 1.9 2.08 14.5 2.0 2.16
60 14.2 2.2 1.86 14.4 2.2 1.94 14.5 2.1 2.03
10 70 12.1 1.9 1.87 12.2 1.8 1.94 12.3 1.8 2.01
80 9.9 1.6 1.87 10.0 1.5 1.94 10.1 1.5 2.00

– FC/MC/PC32 1.00 1.00 1.00 T*(8,L)X*B12 FC/MC/PC43B 1.04 1.12 0.92
AHE30B – 1.01 1.07 0.95 T*(8,L)X*C20 FC/MC/PC43C 0.99 1.09 0.91
AHE36C – 1.02 1.12 0.91 T*9(C,V)*B12 FC/MC/PC35B 1.02 1.05 0.97
AHR30B – 1.05 1.04 1.01 T*9(C,V)*B12 FC/MC/PC43B 1.04 1.08 0.96
AHR36B – 1.06 1.05 1.00 T*9(C,V)*C16 FC/MC/PC35C 1.01 1.08 0.94
AHV36C – 1.00 1.10 0.91 T*9(C,V)*C20 FC/MC/PC35C 1.01 1.08 0.93
AV*36 – 1.01 1.12 0.90 T*9(C,V)*C20 FC/MC/PC43C 1.02 1.11 0.92
MV16C FC/MC35C 1.01 1.10 0.91 T*9X*C16 FC/MC/PC35C 1.01 1.09 0.93
MV16C FC/MC43C 1.02 1.11 0.92 T*9X*C16 FC/MC/PC43C 1.03 1.12 0.92
MX16C FC/MC35C 1.00 1.10 0.91 Y*(8,L)C*A12 FC/MC/PC32A 1.03 1.03 1.00
MX16C FC/MC43C 1.01 1.13 0.90 Y*(8,L)C*A12 FC/MC/PC37A 1.02 1.08 0.95
Y*(8,L)C*B12 FC/MC/PC35B 1.01 1.06 0.96
Furnaces Coils MBH COP KW Y*(8,L)C*B12 FC/MC/PC43B 1.03 1.08 0.95
T*(8,L)V*A12 FC/MC/PC32A 1.03 1.03 1.00 Y*(8,L)C*C16 FC/MC/PC35C 1.01 1.08 0.93
T*(8,L)V*A12 FC/MC/PC37A 1.02 1.08 0.95 Y*(8,L)C*C16 FC/MC/PC43C 1.02 1.11 0.92
T*(8,L)V*B12 FC/MC/PC35B 1.01 1.06 0.96 Y*(8,L)C*C20 FC/MC/PC35C 1.01 1.07 0.95
T*(8,L)V*B12 FC/MC/PC43B 1.03 1.08 0.95 Y*(8,L)C*C20 FC/MC/PC43C 1.02 1.12 0.91
T*(8,L)V*C16 FC/MC/PC35C 1.01 1.08 0.93 Y*9C*B12 FC/MC/PC35B 1.02 1.05 0.97
T*(8,L)V*C16 FC/MC/PC43C 1.02 1.11 0.92 Y*9C*B12 FC/MC/PC43B 1.04 1.08 0.96
T*(8,L)V*C20 FC/MC/PC35C 1.01 1.07 0.95 Y*9C*C16 FC/MC/PC35C 1.01 1.08 0.94
T*(8,L)V*C20 FC/MC/PC43C 1.02 1.12 0.91 Y*9C*C16 FC/MC/PC43C 1.03 1.09 0.94
T*(8,L)X*A12 FC/MC/PC32A 1.01 1.07 0.95 Y*9C*C20 FC/MC/PC35C 1.01 1.08 0.93
T*(8,L)X*A12 FC/MC/PC37A 1.04 1.13 0.93 Y*9C*C20 FC/MC/PC43C 1.02 1.11 0.92
T*(8,L)X*B12 FC/MC/PC35B 1.02 1.09 0.94

571209-YTG-C-1012

60 38.0 3.7 3.01 37.2 3.6 3.00 36.4 3.6 2.98
60 70 37.5 3.5 3.18 36.9 3.4 3.17 36.4 3.4 3.15
80 37.0 3.2 3.34 36.7 3.2 3.33 36.4 3.2 3.32
60 34.7 3.5 2.87 34.0 3.5 2.87 33.3 3.4 2.86
47 70 34.1 3.3 3.01 33.7 3.3 2.99 33.3 3.3 3.00
80 33.6 3.1 3.14 33.5 3.1 3.16 33.3 3.1 3.18
60 32.3 3.4 2.75 32.0 3.4 2.78 31.7 3.3 2.80
40 70 31.5 3.2 2.88 31.4 3.2 2.91 31.4 3.1 2.94
80 30.6 3.0 3.00 30.9 3.0 3.04 31.1 3.0 3.08
60 28.4 3.2 2.59 28.5 3.2 2.63 28.7 3.1 2.68
30 70 27.3 3.0 2.69 27.8 3.0 2.74 28.3 3.0 2.79
80 26.1 2.7 2.79 27.0 2.8 2.85 27.9 2.8 2.91
60 21.8 2.7 2.37 22.9 2.7 2.44 24.0 2.8 2.51
17 70 21.1 2.5 2.46 22.3 2.6 2.53 23.4 2.6 2.60
80 17.6 2.1 2.47 18.8 2.2 2.55 20.1 2.2 2.63
60 21.2 2.6 2.36 20.7 2.5 2.43 20.3 2.4 2.51
10 70 18.2 2.2 2.38 18.0 2.1 2.46 17.8 2.1 2.53
80 15.2 1.9 2.40 15.3 1.8 2.48 15.3 1.8 2.56

Air Handlers Coils MBH COP KW
– FC/MC/PC37 0.94 0.96 0.97
– FC/MC/PC43 0.94 0.96 0.97
– FC/MC/PC48 0.93 0.96 0.97
– UC48 0.95 0.99 0.96
AHE36C – 0.92 1.02 0.90
AHE42D – 0.91 1.03 0.89
AHR36B – 0.94 0.97 0.97
AHR42C – 0.93 0.98 0.95
AHV36C – 0.92 1.01 0.91
AHV42D – 0.91 1.03 0.89
AV*36 – 0.92 1.02 0.90
MV12B FC/MC43B 0.92 1.01 0.91
MV12D FC/MC48D 0.91 1.04 0.88
MV16C FC/MC43C 0.92 1.02 0.90
MV16C FC/MC48C 0.91 1.02 0.89
MX12B FC/MC43B 0.92 1.01 0.91
MX12D FC/MC48D 0.91 1.02 0.89
MX16C FC/MC43C 0.91 1.04 0.88
MX16C FC/MC48C 0.91 1.04 0.88

571209-YTG-C-1012
Furnaces Coils MBH COP KW Furnaces Coils MBH COP KW

T*(8,L)V*A12 FC/MC/PC37A 0.93 0.98 0.95 T*9X*C16 FC/MC/PC43C 0.92 1.02 0.90
T*(8,L)V*C16 UC48C 0.93 1.05 0.89 T*9X*C20 FC/MC/PC48C 0.91 1.02 0.90
T*(8,L)V*C20 FC/MC/PC48C 0.91 1.02 0.89 T*9X*D20 FC/MC/PC48D 0.91 1.02 0.89
T*(8,L)V*C20 UC48C 0.93 1.05 0.88 T*9X*D20 UC48D 0.93 1.05 0.88
T*(8,L)X*C16 UC48C 0.93 1.07 0.86 Y*(8,L)C*C16 UC48C 0.93 1.05 0.89
T*(8,L)X*C20 UC48C 0.94 1.07 0.87 Y*(8,L)C*C20 UC48C 0.93 1.05 0.88
T*9(C,V)*C16 UC48C 0.93 1.04 0.90 Y*9C*C16 UC48C 0.93 1.04 0.90
T*9(C,V)*C20 UC48C 0.95 1.04 0.91 Y*9C*C20 UC48C 0.95 1.04 0.91
T*9(C,V)*D20 FC/MC/PC48D 0.91 1.01 0.90 Y*9C*D20 FC/MC/PC48D 0.91 1.01 0.90
T*9(C,V)*D20 UC48D 0.93 1.04 0.89 Y*9C*D20 UC48D 0.93 1.04 0.89
T*9X*B12 FC/MC/PC43B 0.93 1.01 0.92

571209-YTG-C-1012

60 45.9 4.2 3.23 45.2 4.1 3.20 44.6 4.1 3.18
60 70 44.7 3.8 3.42 44.5 3.8 3.40 44.4 3.8 3.39
80 43.5 3.5 3.61 43.8 3.6 3.60 44.1 3.6 3.58
60 41.8 4.2 2.92 41.5 4.0 3.07 41.2 3.7 3.22
47 70 40.8 3.9 3.09 40.3 3.7 3.19 39.8 3.5 3.35
80 39.7 3.6 3.27 39.1 3.4 3.35 38.4 3.3 3.43
60 39.0 4.0 2.85 38.6 3.8 2.98 38.2 3.6 3.12
40 70 37.7 3.7 3.00 37.1 3.5 3.13 36.5 3.3 3.25
80 36.3 3.4 3.15 35.5 3.2 3.27 34.8 3.0 3.39
60 34.9 3.7 2.73 34.0 3.5 2.85 33.2 3.3 2.97
30 70 32.6 3.4 2.85 31.7 3.1 2.95 30.8 3.0 3.06
80 30.3 3.0 2.96 29.4 2.8 3.06 28.5 2.6 3.16
60 26.6 3.0 2.64 25.8 2.8 2.71 25.0 2.6 2.79
17 70 22.6 2.6 2.60 21.9 2.4 2.69 21.2 2.2 2.77
80 20.3 2.2 2.67 19.7 2.1 2.77 19.1 1.9 2.87
60 20.9 2.5 2.47 20.1 2.3 2.57 19.3 2.1 2.66
10 70 18.7 2.2 2.50 18.0 2.0 2.60 17.4 1.9 2.70
80 16.4 1.9 2.52 15.9 1.8 2.63 15.4 1.7 2.73

– FC/MC/PC60 1.00 1.00 1.00 T*9(C,V)*C16 UC60C 1.02 1.04 0.98
– UC60 1.02 1.03 0.99 T*9(C,V)*C20 FC/PC60C 0.99 1.02 0.97
AHE48D – 0.98 1.06 0.92 T*9(C,V)*C20 UC60C 1.02 1.05 0.97
AHV48D – 0.98 1.04 0.94 T*9(C,V)*D20 UC60D 1.00 1.06 0.95
AV*48 – 0.98 1.06 0.93 T*9X*C16 FC/PC60C 1.02 1.09 0.93
AV*60 – 0.98 1.06 0.93 T*9X*C16 UC60C 1.00 1.07 0.94
MV16C FC60C 0.99 1.04 0.95 T*9X*C20 FC/PC60C 1.02 1.11 0.92
MV20D FC/MC60D 0.99 1.05 0.95 T*9X*C20 UC60C 1.00 1.08 0.93
MX20D FC/MC60D 1.00 1.12 0.89 T*9X*D20 UC60D 1.00 1.11 0.91
Y*(8,L)C*C16 FC/PC60C 0.99 1.03 0.97
Furnaces Coils MBH COP KW Y*(8,L)C*C16 UC60C 1.00 1.06 0.94
T*(8,L)V*C16 FC/PC60C 0.99 1.03 0.97 Y*(8,L)C*C20 FC/PC60C 0.99 1.04 0.95
T*(8,L)V*C16 UC60C 1.00 1.06 0.94 Y*(8,L)C*C20 UC60C 1.00 1.08 0.93
T*(8,L)V*C20 FC/PC60C 0.99 1.04 0.95 Y*9C*C16 FC/PC60C 1.00 1.01 1.00
T*(8,L)V*C20 UC60C 1.00 1.08 0.93 Y*9C*C16 UC60C 1.02 1.04 0.98
T*(8,L)X*C16 FC/PC60C 0.98 1.06 0.93 Y*9C*C20 FC/PC60C 0.99 1.02 0.97
T*(8,L)X*C16 UC60C 0.99 1.10 0.90 Y*9C*C20 UC60C 1.02 1.05 0.97
T*(8,L)X*C20 UC60C 1.02 1.10 0.93 Y*9C*D20 UC60D 1.00 1.06 0.95
T*9(C,V)*C16 FC/PC60C 1.00 1.01 1.00

571209-YTG-C-1012

60 53.4 3.7 4.17 53.2 3.7 4.17 53.1 3.7 4.16
60 70 51.9 3.5 4.32 52.0 3.5 4.31 52.2 3.6 4.30
80 50.4 3.3 4.45 50.8 3.3 4.46 51.3 3.4 4.46
60 46.3 3.6 3.75 46.6 3.6 3.77 46.9 3.6 3.78
47 70 46.5 3.7 3.71 46.0 3.5 3.85 45.5 3.4 3.97
80 46.7 3.7 3.68 45.4 3.5 3.84 44.2 3.2 4.01
60 42.6 3.5 3.52 42.8 3.5 3.55 43.0 3.5 3.58
40 70 39.8 3.3 3.57 40.3 3.3 3.61 40.8 3.3 3.65
80 37.0 3.0 3.63 37.8 3.0 3.68 38.7 3.0 3.72
60 32.1 3.1 3.04 33.2 3.1 3.12 34.4 3.1 3.21
30 70 31.7 2.9 3.16 32.7 3.0 3.24 33.7 3.0 3.31
80 31.4 2.8 3.29 32.2 2.8 3.36 32.9 2.8 3.42
60 27.2 2.8 2.82 28.1 2.9 2.88 29.0 2.9 2.95
17 70 26.6 2.7 2.89 27.6 2.7 2.98 28.5 2.7 3.07
80 24.2 2.4 2.96 25.1 2.4 3.05 26.1 2.4 3.14
60 23.1 2.6 2.62 24.4 2.6 2.72 25.7 2.7 2.83
10 70 21.7 2.3 2.71 22.7 2.4 2.81 23.7 2.4 2.91
80 20.3 2.1 2.80 21.1 2.1 2.90 21.8 2.1 2.99

– FC/MC/PC60 1.00 1.00 1.00 T*9(C,V)*C16 FC/PC60C 0.99 1.03 0.96
– FC/MC62 0.99 1.01 0.98 T*9(C,V)*C16 UC60C 0.99 1.02 0.97
– UC60 1.00 1.02 0.98 T*9(C,V)*C20 FC/MC62D 0.99 1.02 0.97
AHE48D – 0.98 1.06 0.92 T*9(C,V)*C20 FC/PC60C 0.99 1.03 0.96
AHE60D – 0.97 1.06 0.91 T*9(C,V)*C20 UC60C 0.99 1.02 0.97
AHR60D – 0.99 1.01 0.98 T*9(C,V)*D20 FC/MC62D 0.99 1.02 0.97
AHV48D – 0.97 1.02 0.95 T*9(C,V)*D20 UC60D 0.99 1.03 0.96
AHV60D – 0.98 1.03 0.95 T*9X*C16 FC/MC62D 0.99 1.04 0.95
AV*48 – 0.98 1.07 0.92 T*9X*C16 FC/PC60C 0.98 1.05 0.93
AV*60 – 0.98 1.07 0.91 T*9X*C16 UC60C 0.99 1.05 0.95
MV16C FC60C 0.98 1.06 0.93 T*9X*C20 FC/MC62D 0.98 1.05 0.93
MV20D FC/MC60D 0.98 1.06 0.93 T*9X*C20 FC/PC60C 0.98 1.06 0.92
MV20D FC/MC62D 0.98 1.06 0.93 T*9X*C20 UC60C 0.98 1.06 0.93
MX20D FC/MC60D 0.97 1.09 0.89 T*9X*D20 FC/MC62D 0.99 1.04 0.95
MX20D FC/MC62D 0.98 1.08 0.91 T*9X*D20 UC60D 0.97 1.07 0.90
Y*(8,L)C*C16 FC/MC62D 0.99 1.03 0.96
Furnaces Coils MBH COP KW Y*(8,L)C*C16 FC/PC60C 0.99 1.03 0.96
T*(8,L)V*C16 FC/MC62D 0.99 1.03 0.96 Y*(8,L)C*C16 UC60C 0.99 1.03 0.96
T*(8,L)V*C16 FC/PC60C 0.99 1.03 0.96 Y*(8,L)C*C20 FC/MC62D 0.99 1.04 0.95
T*(8,L)V*C16 UC60C 0.99 1.03 0.96 Y*(8,L)C*C20 FC/PC60C 0.99 1.04 0.95
T*(8,L)V*C20 FC/MC62D 0.99 1.04 0.95 Y*(8,L)C*C20 UC60C 0.99 1.05 0.95
T*(8,L)V*C20 FC/PC60C 0.99 1.04 0.95 Y*9C*C16 FC/MC62D 0.99 1.03 0.96
T*(8,L)V*C20 UC60C 0.99 1.05 0.95 Y*9C*C16 FC/PC60C 0.99 1.03 0.96
T*(8,L)X*C16 FC/MC62D 0.98 1.05 0.94 Y*9C*C16 UC60C 0.99 1.02 0.97
T*(8,L)X*C16 FC/PC60C 0.98 1.06 0.93 Y*9C*C20 FC/MC62D 0.99 1.02 0.97
T*(8,L)X*C16 UC60C 0.99 1.05 0.95 Y*9C*C20 FC/PC60C 0.99 1.03 0.96
T*(8,L)X*C20 FC/MC62D 0.98 1.05 0.93 Y*9C*C20 UC60C 0.99 1.02 0.97
T*(8,L)X*C20 UC60C 0.97 1.09 0.89 Y*9C*D20 FC/MC62D 0.99 1.02 0.97
T*9(C,V)*C16 FC/MC62D 0.99 1.03 0.96 Y*9C*D20 UC60D 0.99 1.03 0.96

EVAPORATOR COIL MODEL NO FC/MC62
60 72.1 3.8 5.62 71.1 3.8 5.53 70.1 3.8 5.42
60 70 70.9 3.4 6.11 70.6 3.4 6.02 70.3 3.5 5.90
80 69.8 3.1 6.62 70.2 3.2 6.50 70.5 3.2 6.40
60 62.7 3.7 4.99 62.4 3.7 4.95 62.1 3.7 4.90
47 70 61.1 3.3 5.43 61.1 3.5 5.09 61.1 3.8 4.76
80 59.6 3.0 5.86 59.9 3.4 5.23 60.1 3.8 4.61
60 55.6 3.5 4.63 55.9 3.6 4.62 56.2 3.6 4.60
40 70 54.3 3.1 5.06 54.5 3.2 5.04 54.8 3.2 5.00
80 52.9 2.8 5.50 53.1 2.9 5.46 53.3 2.9 5.40
60 45.3 3.2 4.20 45.7 3.2 4.20 46.1 3.2 4.21
30 70 43.9 2.9 4.51 44.3 2.9 4.53 44.8 2.9 4.54
80 42.4 2.6 4.82 43.0 2.6 4.86 43.5 2.6 4.90
60 38.0 2.8 3.93 38.5 2.9 3.96 39.1 2.9 4.00
17 70 35.5 2.5 4.19 36.5 2.5 4.24 37.5 2.6 4.31
80 33.0 2.2 4.47 34.4 2.2 4.53 35.9 2.3 4.61
60 32.3 2.6 3.71 32.8 2.6 3.74 33.3 2.6 3.75
10 70 31.3 2.3 4.04 31.5 2.3 4.05 31.8 2.3 4.08
80 30.3 2.0 4.35 30.2 2.0 4.36 30.2 2.0 4.38

– FC/MC62 1.00 1.00 1.00 T*(8,L)V*C20 FC/MC62D 0.99 0.96 1.03
– FC64 1.03 0.95 1.08 T*(8,L)V*C20 FC64D 1.01 0.95 1.06
AHE60D – 0.99 1.01 0.98 T*(8,L)X*C20 FC/MC62D 0.98 0.98 1.00
AHR60D – 1.01 0.98 1.04 T*(8,L)X*C20 FC64D 1.00 0.95 1.05
AHV60D – 0.99 0.97 1.02 T*9(C,V)*C20 FC64D 1.01 0.94 1.07
MV20D FC/MC62D 1.00 1.00 1.00 T*9(C,V)*D20 FC/MC62D 0.99 0.96 1.03
MV20D FC64D 1.01 0.97 1.05 T*9(C,V)*D20 FC64D 1.01 0.94 1.07
MX20D FC/MC62D 0.99 1.02 0.97 T*9X*C20 FC/MC62D 0.98 0.98 1.00
MX20D FC64D 1.00 0.98 1.02 T*9X*C20 FC64D 1.01 0.94 1.07
T*9X*D20 FC/MC62D 0.98 0.97 1.01
T*9X*D20 FC64D 1.01 0.95 1.05
Y*(8,L)C*C20 FC/MC62D 0.99 0.96 1.03
Y*(8,L)C*C20 FC64D 1.01 0.95 1.06
Y*9C*C20 FC/MC62D 0.99 0.95 1.04
Y*9C*C20 FC/MC62D 0.99 0.95 1.04
Y*9C*C20 FC64D 1.01 0.94 1.08
Y*9C*D20 FC/MC62D 0.99 0.96 1.03
Y*9C*D20 FC64D 1.01 0.94 1.07
Subject to change without notice. Published in U.S.A. 571209-YTG-C-1012

Copyright © 2012 by Johnson Controls, Inc. All rights reserved. Supersedes: 571209-YTG-B-1211
Johnson Controls Unitary Products
5005 York Drive
Norman, OK 73069

1york YHJD 571209 Ytg C 1012

Uploaded by

Copyright:

Available Formats

1york YHJD 571209 Ytg C 1012

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

1york YHJD 571209 Ytg C 1012

Uploaded by

Copyright:

Available Formats

571209-YTG-C-1012

FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE

Physical and Electrical Data

Dimensions Refrigerant Connection

2 Johnson Controls Unitary Products

System Charge for Various Matched Systems

Indoor Unit 3,4,5 Additional Charge, Oz

Johnson Controls Unitary Products 3

COOLING CAPACITY - With Air Handler Coils

4 Johnson Controls Unitary Products

COOLING CAPACITY - With Air Handler Coils (Continued)

Johnson Controls Unitary Products 5

COOLING CAPACITY - With High Efficiency Motor Furnaces

6 Johnson Controls Unitary Products

COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)

Johnson Controls Unitary Products 7

COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)

8 Johnson Controls Unitary Products

COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)

Johnson Controls Unitary Products 9

COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)

10 Johnson Controls Unitary Products

COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)

Johnson Controls Unitary Products 11

COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)

12 Johnson Controls Unitary Products

HEATING CAPACITY - With Air Handler

Johnson Controls Unitary Products 13

HEATING CAPACITY - With Air Handler (Continued)

14 Johnson Controls Unitary Products

Johnson Controls Unitary Products 15

HEATING CAPACITY - With High Efficiency Motor Furnaces

16 Johnson Controls Unitary Products

HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued)

Johnson Controls Unitary Products 17

18 Johnson Controls Unitary Products

HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued)

Johnson Controls Unitary Products 19

HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued)

20 Johnson Controls Unitary Products

HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued)

Johnson Controls Unitary Products 21

ACCESSORIES Compressor Blanket - Designed to further reduce the normal

22 Johnson Controls Unitary Products

MINIMUM 18” SERVICE

NEC CLASS 2 WIRING

10” CLEARANCE TO FURNACE OR

TYPICAL FIELD WIRING

1 JUMPER TERMINALS E AND W TO HEAT DEHUMIDIFICATION CONTROL CONNECTION

Johnson Controls Unitary Products 23

COOLING PERFORMANCE DATA

Multipliers for determining the performance with other indoor sections.

Air Handlers Coils T.C. S.C. KW

Continued on next page.

24 Johnson Controls Unitary Products

Furnaces Coils T.C. S.C. KW Furnaces Coils T.C. S.C. KW

Johnson Controls Unitary Products 25

COOLING PERFORMANCE DATA

Multipliers for determining the performance with other indoor sections.