S 2 Cpuse L N
S 2 Cpuse L N
S 2 Cpuse L N
S-2-CPUSE
CPUSE--L-N
Two-way Low Power Splitter, 555–2700 MHz
General Specifications
Brand Andrew®
Device Type Splitter
Interface N Female
Color Black
Electrical Specifications
Operating Frequency Band 555 – 2700 MHz
3rd Order IMD -130 dBc
3rd Order IMD Test Method Two +43 dBm carriers
Average Power, maximum 80 W
Impedance 50 ohm
Insertion Loss at Frequency Band 0.3 dB @ 555–960 MHz | 0.4 dB @ 1710–2700 MHz
Isolation at Frequency Band 20 dB @ 698–2700 MHz | 17 dB @ 555–698 MHz
Peak Power, maximum 1 kW
Power Rating, combining 0.5 W
Power Rating, Splitting 80 W
Reflected Power, maximum 3W
Split Loss 3.0 dB
VSWR 1.2:1 @ 698–2700 MHz | 1.43:1 @ 555–698 MHz
Mechanical Specifications
Inner Contact Plating Silver
Outer Contact Plating Trimetal
Environmental Specifications
Application Indoor/Outdoor
Ingress Protection Test Method IEC 60529:2001, IP65
Operating Temperature -25 °C to +85 °C (-13 °F to +185 °F)
Relative Humidity Up to 100%
Dimensions
Height 22.00 mm | 0.87 in
Length 107.00 mm | 4.21 in
Width 79.00 mm | 3.11 in
Net Weight 240.00 g | 0.53 lb
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 2
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 19, 2017 July 25, 2017
Product Specifications
S -2-CPUSE
CPUSE--L-N
Packed Dimensions
Height 40.0 mm | 1.6 in
Length 130.0 mm | 5.1 in
Width 100.0 mm | 3.9 in
Shipping Weight 290.00 g | 0.64 lb
Volume 520.0 cc
Regulatory Compliance/Certifications
Agency Classification
RoHS 2011/65/EU Compliant by Exemption
ISO 9001:2008 Designed, manufactured and/or distributed under this quality management system
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 2 of 2
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 19, 2017 July 25, 2017