7.5.1 - Surface Area of A Prism and Cylinder
7.5.1 - Surface Area of A Prism and Cylinder
7.5.1 - Surface Area of A Prism and Cylinder
Vocabulary: cylinder, height (of a cylinder or prism), lateral area, net, prism, surface area
A. Four sides are rectangles. Each rectangle has length 7 in. and width 4 in. Find the total area of
these sides.
B. The top and bottom of the box are squares with sides of 4 in. Find the total area of the top and
bottom.
2. How many square inches of wrapping paper does Dustin need? 142
Gizmo Warm-up
Dustin’s present is a prism. A prism is a 3-dimensional figure with two parallel,
congruent polygonal bases and sides that are parallelograms. Prisms with one base
directly above the other are right prisms. A cylinder is similar to a prism, but with
circular bases. You will explore the areas of right prisms and cylinders in the
Surface and Lateral Areas of Prisms and Cylinders Gizmo.
1. In the Gizmo, be sure Rectangle is selected. Drag the point at the top right corner of the rectangle down to
change l (length of base), and to the left to change w (width of base). How does the 3-D View and the
Unfolded View (net) of the prism change in each case?
Length: 10
Width: 10
2. Drag the Height (h) slider to change the height. How do the figures change?
it grows when you move the slider to the right and it shrinks when you move it to the left
Get the Gizmo ready:
Activity A:
● Be sure Rectangle is selected.
Rectangular ● Set the Width (w) to 8 and the Length (l) to 10.
prisms ● Set the Height (h) to 4.0 units by dragging the
slider or entering a value to the right of the slider.
1. The surface area of a prism can be found by adding the areas of all
faces of the prism. Use the net view to find the area of each face of a
right rectangular prism with width 8, length 10, and height 4.
A. First, find the area of each face. Write each area on the net to the right.
B. Then add the areas of all faces to find the surface area (S.A.)
of the rectangular prism.
S.A.=
Select Compute lateral area and Compute surface area to check your answer.
2. Turn off Compute surface area. Notice that some rectangles are still shaded. These are the lateral faces,
or sides, of the rectangular prism.
A. Add the areas of the lateral faces to find the lateral area (L.A.).
L.A. =
Compare your answer to the Lateral area value given in the Gizmo.
B. Turn off Compute lateral area. Because all of the lateral faces have the same height, they can be
combined together into a single rectangle, as shown below.
h
w l
E. How can you find the lateral area using the perimeter of
the base and the height?
B. Find the lateral area of a right rectangular prism with w = 3, l = 4, and h = 7. Show your work and
check in the Gizmo.
4. Turn on Compute surface area. Look at the surface area formula (S.A. = L.A. + 2 • B).
A. Why can you add twice the base area to the lateral area to find
the surface area?
B. Now use just w (width), l (length), and h (height) to write another formula for the surface area of a right
rectangular prism.
S.A. =
C. What part of the formula you wrote above is the same as the L.A. part of the formula given in the
Gizmo?
D. What part of the formula you wrote is the same as the 2 • B part of the formula given in the Gizmo?
5. A right rectangular prism has a square base with side lengths 4.5 in. and a height of 7 in. Find the lateral
and surface areas of this prism. Show your work, and check in the Gizmo.
6. Jessie is painting a 5-ft by 6-ft guest bathroom. The ceiling of the bathroom is 8 ft high.
C. Drag the point on the circle to set the Radius (r) to 5. Set the Height (h)
to 8.0.The formula for the circumference of a circle is C = 2πr. Use a
calculator to find the circumference of the base of this cylinder to the
nearest hundredth.
C≈
E. Write two different formulas for finding the lateral area of a right cylinder. In the first use circumference
(C) and height (h). In the second, use radius (r), pi (π), and height (h). Then select Compute lateral
area to check.
L.A. = L.A. =
2. To find the surface area of a cylinder, you must first find the area of each circular base.
What is the base area of the cylinder above to the nearest hundredth?
C. Write two different formulas for finding the surface area of a right cylinder. In the first, use the lateral
area (L.A.) and area of the base (B). In the second, use the circumference of the base (C), height (h),
and area of the base (B).
S.A. = S.A. =
Turn on Compute surface area to check your formulas and answer above.
B. Use the formulas you wrote on the previous page to find the lateral area and surface area of your
cylinder to the nearest hundredth. Show your work. Then turn on Compute lateral area and
Compute surface area to check your work.
4. Find the surface area, to the nearest hundredth, of a right cylinder with radius 6.2 cm and height 10 cm.
Show your work. Check your answer in the Gizmo.
5. Challenge: You can also write a formula for the surface area of a right cylinder using just
pi (π), radius (r), and height (h). Write this formula below.
S.A. =