6/5/23, 12:25 PM Linear programming: Simplex method example

PHPSimplex
HOME
HOME FAVORITES
FAVORITES  CONTACT
 CONTACT CREDITS
CREDITS

Tweet

Optimizing resources with Linear Programming Like 55

Home PHPSimplex Operations Research Theory Examples George B. Dantzig Language

Example (part 1): Simplex method

Solve using the Simplex method the following problem:

Maximize Z = f(x,y) = 3x + 2y
subject to: 2x + y ≤ 18
  2x + 3y ≤ 42
  3x + y ≤ 24
  x≥0,y≥0

Consider the following steps:

1. Make a change of variables and normalize the sign of the independent terms.

A change is made to the variable naming, establishing the following correspondences:

x becomes X1

y becomes X2

As the independent terms of all restrictions are positive no further action is required. Otherwise there would be multiplied by "-1" on both
sides of the inequality (noting that this operation also affects the type of restriction).

2. Normalize restrictions.

The inequalities become equations by adding slack, surplus and artificial variables as the following table:

Inequality type Variable that appears

≥ - surplus + artificial
= + artificial
≤ + slack

In this case, a slack variable (X3, X4 and X5) is introduced in each of the restrictions of ≤ type, to convert them into equalities, resulting the
system of linear equations:

2·X1 + X2 + X3 = 18
2·X1 + 3·X2 + X4 = 42
3·X1 + X2 + X5 = 24

3. Match the objective function to zero.

Z - 3·X1 - 2·X2 - 0·X3 - 0·X4 - 0·X5 = 0

4. Write the initial tableau of Simplex method.

The initial tableau of Simplex method consists of all the coefficients of the decision variables of the original problem and the slack, surplus
and artificial variables added in second step (in columns, with P0 as the constant term and Pi as the coefficients of the rest of Xi variables), and
constraints (in rows). The Cb column contains the coefficients of the variables that are in the base.

The first row consists of the objective function coefficients, while the last row contains the objective function value and reduced costs Zj -
Cj.

The last row is calculated as follows: Zj = Σ(Cbi·Pj) for i = 1..m, where if j = 0, P0 = bi and C0 = 0, else Pj = aij. Although this is the first
tableau of the Simplex method and all Cb are null, so the calculation can simplified, and by this time Zj = -Cj.

www.phpsimplex.com/en/simplex_method_example.htm 1/3
6/5/23, 12:25 PM Linear programming: Simplex method example

Tableau I . 1st iteration

      3 2 0 0 0
Base Cb P0 P1 P2 P3 P4 P5
P3 0 18 2 1 1 0 0
P4 0 42 2 3 0 1 0
P5 0 24 3 1 0 0 1
Z   0 -3 -2 0 0 0

5. Stopping condition.

If the objective is to maximize, when in the last row (indicator row) there is no negative value between discounted costs (P1 columns
below) the stop condition is reached.

In that case, the algorithm reaches the end as there is no improvement possibility. The Z value (P0 column) is the optimal solution of the
problem.

Another possible scenario is all values are negative or zero in the input variable column of the base. This indicates that the problem is not
limited and the solution will always be improved.

Otherwise, the following steps are executed iteratively.

6. Choice of the input and output base variables.

First, input base variable is determined. For this, column whose value in Z row is the lesser of all the negatives is chosen. In this example
it would be the variable X1 (P1) with -3 as coefficient.

If there are two or more equal coefficients satisfying the above condition (case of tie), then choice the basic variable.

The column of the input base variable is called pivot column (in green color).

Once obtained the input base variable, the output base variable is determined. The decision is based on a simple calculation: divide each
independent term (P0 column) between the corresponding value in the pivot column, if both values are strictly positive (greater than zero). The
row whose result is minimum score is chosen.

If there is any value less than or equal to zero, this quotient will not be performed. If all values of the pivot column satisfy this condition,
the stop condition will be reached and the problem has an unbounded solution (see Simplex method theory).

In this example: 18/2 [=9] , 42/2 [=21] and 24/3 [=8]

The term of the pivot column which led to the lesser positive quotient in the previous division indicates the row of the slack variable
leaving the base. In this example, it is X5 (P5), with 3 as coefficient. This row is called pivot row (in green).

If two or more quotients meet the choosing condition (case of tie), other than that basic variable is chosen (wherever possible).

The intersection of pivot column and pivot row marks the pivot value, in this example, 3.

7. Update tableau.

The new coefficients of the tableau are calculated as follows:

In the pivot row each new value is calculated as:

New value = Previous value / Pivot

In the other rows each new value is calculated as:

New value = Previous value - (Previous value in pivot column * New value in pivot row)

So the pivot is normalized (its value becomes 1), while the other values of the pivot column are canceled (analogous to the Gauss-Jordan
method).

Calculations for P4 row are shown below:

Previous P4 row 42 2 3 0 1 0
  - - - - - -
Previous value in pivot column 2 2 2 2 2 2
  x x x x x x
New value in pivot row 8 1 1/3 0 0 1/3
  = = = = = =
New P4 row 26 0 7/3 0 1 -2/3

The tableau corresponding to this second iteration is:

Tableau II . 2nd iteration

      3 2 0 0 0

www.phpsimplex.com/en/simplex_method_example.htm 2/3
6/5/23, 12:25 PM Linear programming: Simplex method example

Tableau II . 2nd iteration

Base Cb P0 P1 P2 P3 P4 P5
P3 0 2 0 1/3 1 0 -2/3
P4 0 26 0 7/3 0 1 -2/3
P1 3 8 1 1/3 0 0 1/3
Z   24 0 -1 0 0 1

8. When checking the stop condition is observed which is not fulfilled since there is one negative value in the last row, -1. So, continue iteration steps 6
and 7 again.

6.1. The input base variable is X2 (P2), since it is the variable that corresponds to the column where the coefficient is -1.

6.2. To calculate the output base variable, the constant terms P0 column) are divided by the terms of the new pivot column: 2 / 1/3 [=6] , 26 /
7/3 [=78/7] and 8 / 1/3 [=24]. As the lesser positive quotient is 6, the output base variable is X3 (P3).

6.3. The new pivot is 1/3.

7. Updating the values of tableau again is obtained:

Tableau III . 3rd iteration

      3 2 0 0 0
Base Cb P0 P1 P2 P3 P4 P5
P2 2 6 0 1 3 0 -2
P4 0 12 0 0 -7 1 4
P1 3 6 1 0 -1 0 1
Z   30 0 0 3 0 -1

9. Checking again the stop condition reveals that the pivot row has one negative value, -1. It means that optimal solution is not reached yet and we
must continue iterating (steps 6 and 7):

6.1. The input base variable is X5 (P5), since it is the variable that corresponds to the column where the coefficient is -1.

6.2. To calculate the output base variable, the constant terms (P0) are divided by the terms of the new pivot column: 6/(-2) [=-3] , 12/4 [=3] ,
and 6/1 [=6]. In this iteration, the output base variable is X4 (P4).

6.3. The new pivot is 4.

7. Updating the values of tableau again is obtained:

Tableau IV . 4th iteration

      3 2 0 0 0
Base Cb P0 P1 P2 P3 P4 P5
P2 2 12 0 1 -1/2 1/2 0
P5 0 3 0 0 -7/4 1/4 1
P1 3 3 1 0 3/4 -1/4 0
Z   33 0 0 5/4 1/4 0

10. End of algorithm.

It is noted that in the last row, all the coefficients are positive, so the stop condition is fulfilled.

The optimal solution is given by the val-ue of Z in the constant terms column (P0 column), in the example: 33. In the same column, the
point where it reaches is shown, watching the corresponding rows of input decision variables: X1 = 3 and X2 = 12.

Undoing the name change gives x = 3 and y = 12.

Solve with PHPSimplex.

Copyright ©2006-2023 PHPSimplex. All rights reserved.

www.phpsimplex.com/en/simplex_method_example.htm 3/3