ET5X Technical Accessory Guide

NOTE: This document is only for general reference. Solution Builder and related PMBs should be used for product availability, pricing, and final solution selection.

* Zebra does not endorse or specifically recommend any third-party products, accessories, or hardware . ZEBRA DISCLAIMS ANY AND ALL LIABILITY, INCLUDING ANY
EXPRESS OR IMPLIED WARRANTIES, WHETHER ORAL OR WRITTEN, FOR SUCH THIRD PARTY PRODUCTS, ACCESSORIES, OR HARDWARE. THE CUSTOMER
ACKNOWLEDGES THAT NO REPRESENTATION HAS BEEN MADE BY ZEBRA AS TO THE FITNESS OF THE THIRD-PARTY PRODUCTS, ACCESSORIES, OR HARDWARE FOR
THE CUSTOMER'S INTENDED PURPOSE.

Cradles/Charging

Part Number Picture Description Notes Required Items

►Provides charging
►Provides one HDMI, one Ethernet,
and three USB 3.0 ports
►Ethernet modes 10/100/1000Mb via
USB 2.0 to Ethernet adapter in dock.
►HDMI v1.4a, up to 1920x1080px,
60Hz. Recommend using shielded
HDMI cable.
►USB ports can provide 900 mA max
current on each port - will NOT power
DS3508-ER scanner or DS3608-ER
scanner in default power mode -
DS3608-ER will need to use ER Low
►Power Supply (PWR-
Power option to work properly.
Single Slot Communication BGA12V50W0WW and CBL-
►Does NOT charge spare battery.
CRD-ET5X-1SCOM1 Dock/Cradle - Standard DC-388A1-01)
►Compatible with both 8" and 10"
Connector ►AC Line Cord (23844-00-
tablets.
00R).
►Has standard 40-pin connector.
►Not compatible with devices using
Rugged Frame with Rugged I/O port
(SG-ET5X-8RCSE1)
►Includes shim which should be used
with devices without the Rugged Frame
(SG-ET5X-8CSE1-01/SG-ET5X-
10CSE1-01) attached.
►Dock must be powered with Power
Supply for any of the ports to be
operational.
►Dock will power down when tablet is
removed or shut down.
►Provides charging
►Provides one HDMI, one Ethernet,
and three USB 3.0 ports
►Ethernet modes 10/100/1000Mb via
USB 2.0 to Ethernet adapter in dock.
►HDMI v1.4a, up to 1920x1080px,
60Hz. Recommend using shielded
HDMI cable.
►Power Supply (PWR-
►USB ports can provide 900 mA max
BGA12V50W0WW and CBL-
current on each port - will NOT power
DC-388A1-01)
DS3508-ER scanner or DS3608-ER
►AC Line Cord (23844-00-
Single Slot Communication scanner in default power mode -
00R).
CRD-ET5X-1SCOM1R Dock/Cradle - Rugged DS3608-ER will need to use ER Low
Connector Power option to work properly.
►ET5X must use Rugged
►Does NOT charge spare battery.
Frame w/Rugged I/O
►Compatible with both 8" and 10"
connector (SG-ET5X-8RCSE1-
tablets.
02 or SG-ET5X-10RCSE1-01)
►Has Rugged POGO pin connector.
Not compatible with devices without
Rugged Frame and rugged I/O port.
►Dock must be powered with Power
Supply for any of the ports to be
operational.
►Dock will power down when tablet is
removed or shut down.

EMC Product Line - ET5X TAG Page 1 of 27

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/4/19
 ►Provides charging
►Does NOT charge spare battery.
►Compatible with both 8" and 10"
tablets. ►Power Supply (PWR-
►Connects to charging contacts on BGA12V50W0WW and CBL-
Single Slot Charge-Only
CRD-ET5X-1SCG1 bottom of tablet. DC-388A1-01)
Dock/Cradle
►Compatible with devices with or ►AC Line Cord (23844-00-
without Rugged Frames 00R).
►Includes shim which should be used
with devices without the Rugged Frame
attached.

►Integrated Kiosk Solution is great for

mPOS and other mobility needs
►Mount RapidDoc Pro Kiosk directly onto a
counter or table.
►Provides Ethernet, with power and USB
connections for up to 8 peripherals.
►Supports ArmorActive Elite Enclosures or
Expansion Back accessories. Simply
change the enclosure for future upgrades
as new tablets are introduced into the
marketplace.
KEY BENEFITS
• Rapid and secure single-handed tablet
docking and undocking Requires ArmorActive
• Integrated hand strap reduces stress and
RapidDoc Expansion Back to
various fatigue on a user’s arm
be installed on ET5X (see
(3rd party) * ArmorActive RapidDoc Pro • Multiple mounting options
KEY FEATURES
Expansion Back section
Kiosk
• Tablet can flip through 310° of rotation below)
• Supports wired or wireless Ethernet
connectivity
• Full power and data integration through
USB for up to 8 peripherals
• Comes with 24V Power Supply for the
Kiosk, tablet and up to 8 peripherals
• Support for Windows and Android based
tablets.
• High strength magnets pull the tablet into
place; metal latches secure your tablet
• Proprietary RFID unlock technology
supports up to 20 users included in the box
• Enable any user authentication method
through the RapidDoc Software
Development Kit
http://www.armoractive.com/zebra

EMC Product Line - ET5X TAG Page 2 of 27

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/4/19
 ENTERPRISE TABLET PRO™
Zebra ET-55 ►Integrated Kiosk Solution is great for
DESIGN BENEFITS mPOS and other mobility needs
Easy to Interact with Tablet
• Multiple orientations allows for integrated use, enhancing the sales
►Multiple orientations allows for
or presentation experience integrated use,enhancing the sales or
– Rotate to portrait or landscape orientation
– Swivel rotation from 180° to 0 to 180° presentation experience.
– Tilt 90° for ‘table top’ orientation
• Quick release with integrated hand strap behind case — allows
– Rotate to portrait or landscape
easy, single-hand hold or carry. orientation
Complete Integration – Swivel rotation from 180° to 0 to 180°
• Proprietary connection feature both secures and powers the tablet,

ENTERPRISE TABLET PRO™

making it simple and easy to set up
Multiple tilt, pivot and swivel orientations.
– Tilt 90° for ‘table top’ orientation
• Turns tablets into fully functional workstations with multiple USB
►Quick release with integrated hand
Zebra ET-55
2.0 inputs allowing for: multi screen set-up, keyboard, mouse,
Ethernet (RJ45) for network integrations
strap behind case — allows easy,
• Enterprise Tablet Case™ keeps the tablet secure and protected
DESIGN
while being fully integrated BENEFITS
— no external wires for locking, single-hand hold or carry.
docking and connectivity Easy to Interact with Tablet
►Proprietary connection feature both

USB 2.0
– Protects screen, buttons and connectors against drops, falls, and
AUDIO
• Multiple orientations allows for integrated use, enhancing the sales
HDMI

RJ45

wear-and-tear from extensive use

or presentation experience
• Optional accessory integration:
– Rotate to portrait or landscape orientation
secures and powers the tablet, making
– Swivel rotation from 180° to 0 to 180°
– Card swipes, touch key pads
– Tilt 90° for ‘table top’ orientation
it simple and easy to set up.
various • Quick release with integrated hand strap behind case — allows
Easy Release RFID Card Locking Technology ►Turns tablets into fully functional
(3rd party) *
easy, single-hand hold or carry.
• Unlocks with one swipe of a card for single hand release
Complete Integration
• Auto-locks when inserted into base, so tablet is always secure and
ArmorActive Enterprise workstations with multiple USB 2.0
ENTERPRISE TABLET PRO™ Tablet Pro Kiosk
Turns the
• Proprietary connection feature both secures and powers tablets into fully functional workstations.
tablet,
charging
making it simple and easy to set up
Multiple tilt, pivot and swivel orientations.
inputs allowing for: multi screen set-up,
• Tablet Quick Release feature in event of a power outage means

Zebra ET-55
• Turns tablets into fully functional workstations with multiple USB
you’re always in control of your
2.0 technology
inputs allowing for: multi screen set-up, keyboard, mouse, keyboard, mouse, Ethernet (RJ45) for
• Easy to read LED system: Ethernet (RJ45) for network integrations
DESIGN
• Enterprise BENEFITS
Tablet Case™ keeps the tablet secure and protected
network integrations.
– Solid Green = connected, secure and charging
while being fully integrated — no external wires for locking,
Easy
– Blinking Green = RFID carddocking to InteractTablet
has unlocked with Tablet
and connectivity Pro Case™ ►Enterprise Tablet Case keeps the
USB 2.0

–• Protects
Multiple orientations allows for integrated use, enhancing the sales
– Red = Tablet Pro Case™ is removed from
screen,universe
buttons anddocking port against drops, falls, and
connectors
AUDIO

tablet secure and protected while

HDMI

or presentation experience
RJ45

wear-and-tear from extensive use

– Rotate to portrait or landscape orientation
• Optional
– Swivelaccessory integration:
– Card
rotation from
– Tilt swipes,
90° for ‘table
180° to 0 to 180°
touchtop’
keyorientation
pads
being fully integrated — no external
• Quick release with integrated hand strap behind case — allows
Easyeasy,
Release RFID
single-hand Card
hold or carry. Locking Technology wires for locking, docking and
• Unlocks withIntegration
one swipe of a card for single hand release
Complete
• Auto-locks
• Proprietarywhen inserted
connection intoboth
feature base, so tablet
secures is always
and powers the secure
tablet, and
connectivity.
Turns tablets into fully functional workstations.
charging
making it simple and easy to set up
• TurnsQuick
• Tablet tabletsRelease
into fullyfeature
functional
in workstations
RFID card swipe
with multiple
event of a power outage USBmeans
Multiple
across tilt,base
pivot and swivel orientations.
to release Tablet Pro Case™ ►Protects screen, buttons and
2.0 inputs allowing for: multi screen
you’re always in control of your technology set-up, keyboard, mouse,
Ethernet (RJ45) for network integrations
• Easy to read LED system:
connectors against drops, falls, and
• Enterprise Tablet Case™ keeps the tablet secure and protected
– Solid
while Green
being =
docking and
– Blinking
connected,
fully integratedsecure
connectivity
Green
— noand
R charging
external wires for locking,
= RFID card has unlocked Tablet Pro Case™
T: 801.653.3807 | www.ArmorActive.com wear-and-tear from extensive use.
© 2016 ArmorActive All Rights Reserved
USB 2.0

– Protects screen, buttons and connectors against drops, falls, and

►Easy Release RFID Card Locking
AUDIO

– Red = Tablet Pro Case™ is removed from universe docking port

HDMI

RJ45

wear-and-tear from extensive use

• Optional accessory integration:
– Card swipes, touch key pads
Technology Unlocks with one swipe of
Easy Release RFID Card Locking Technology a card for single hand release.
• Unlocks with one swipe of a card for single hand release
• Auto-locks when inserted into base, so tablet is always secure and
charging
Turns tablets into fully functional workstations.
►Auto-locks when inserted into base,
RFID card swipe across base to release Tablet Pro Case™
http://www.armoractive.com/zebra • Tablet Quick Release feature in event of a power outage means
you’re always in control of your technology
so tablet is always secure and
• Easy to read LED system:
– Solid Green = connected, secure and charging
charging.
R
T: 801.653.3807 | www.ArmorActive.com
– Blinking Green = RFID card has unlocked Tablet Pro Case™ © 2016 ArmorActive All Rights Reserved
– Red = Tablet Pro Case™ is removed from universe docking port

►Compatible with 10" ET5X units

►Intended for applications that require
a ‘lock and dock’ kiosk solution
RFID card swipe across base to release Tablet Pro Case™
►Available in multiple sizes: 8", 12",
R
T: 801.653.3807 | www.ArmorActive.com 24", and 42" (with or without
© 2016 ArmorActive All Rights Reserved

baseplate)
various
►Available in Black or White
(3rd party) *
ArmorActive Pipeline™ Kiosk ►Built to withstand continuous use in a
System commercial environment
►Power cords are protected from all
twists, turns, and enclosure articulation
►Tile, Swivel, Rotate: Full tablet
interaction for both the employee and
customer supporting a variety of use
case applications (POS, Digital
http://www.armoractive.com/zebra Catalog, Gift Registry, etc.)

CT80 ►Compatible with 8" and 10" ET5X

(3rd party) * units.
►Tablet can go from fixed to mobile in
InVue Business Tablet seconds using a simple switch
Solutions ►Easily rotate between landscape and
portrait display and flip to face the
Contacts: customer
Invue Freestanding, portable
US: [email protected] ►Freestanding out of the box with fixed
LATAM: [email protected] tablet stand
mounting options available.
EU: [email protected]
►Can be used as a fixed kiosk solution
APAC: [email protected]
using the key to disable the handle
MEA: [email protected]
latch
►Turn into a POS easily with added
1.888.55.INVUE
card swipe/chip reader device bracket
https://invue.com ►Uses OEM power cable for charging

EMC Product Line - ET5X TAG Page 3 of 27

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/4/19
CT150 ►Compatible with 8" and 10" ET5X
units.
(3rd party) *
►Tablet can go from fixed to mobile in
seconds using a simple switch
InVue Business Tablet
►Easily rotate between landscape and
Solutions
portrait display and flip to face the
customer
Contacts: Invue Freestanding, portable
US: [email protected] ►Freestanding out of the box with fixed
tablet stand with integrated
LATAM: [email protected] mounting options available.
charging
EU: [email protected] ►Can be used as a fixed kiosk solution
APAC: [email protected] using the key to disable the handle
MEA: [email protected] latch
►Turn into a POS easily with added
1.888.55.INVUE card swipe/chip reader device bracket
►Integrated charging keeps the tablet
https://invue.com
powered and ready to use

►Compatible with 8" and 10" ET5X

CT100 units.
(3rd party) * ►Rugged all metal stand securely
mounts to any drillable surface,
InVue Business Tablet adhesive mount and free standing
Solutions mount option available
►Strong tablet frame protects tablet
Contacts: from theft and abuse
US: [email protected]
Invue Durable, rugged tablet ►Integrated charging powers tablet
LATAM: [email protected]
EU: [email protected]
enclosure when docked, no need to plug in any
APAC: [email protected] cables
MEA: [email protected] ►InVue IR Key instantly unlocks tablet
for mobility
1.888.55.INVUE ►Easily rotate tablet between portrait
and landscape
►Swivel base option is available
►Includes ergonomically designed
handles and straps for easy use
https://invue.com

►Compatible with 10" ET5X units

►High security fixed tablet stand
►Intended for applications that require
tablets to be removed infrequently.
CT200
(3rd party) * ►Three counter-based stands: Fixed,
swivel, freestanding.
InVue Business Tablet ►Low profile wall mount bracket with
standard VESA pattern
Solutions
►Floor stand available with weighted
based and bolt mount for added
Contacts:
US: [email protected] stability
Invue Fixed Tablet Stand
LATAM: [email protected] ►Tilt option available for all stands
EU: [email protected] ►Supports integration of audio jack
APAC: [email protected] extender and payment devices
MEA: [email protected] ►Self locking frame cover with audible
indicator
1.888.55.INVUE ►Durable enough to be left
unattended, withstanding over 300
pounds of pull force
►Compatible with InVue’s secure IR
Keys
https://invue.com
►Tamper resistant

EMC Product Line - ET5X TAG Page 4 of 27

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/4/19
 ►Compatible with 8" and 10" ET5X
units, 8" configuration currently
available
►Designed for fixed and mobile
applications
►Integrated charging for tablet and
payment device.
►3 axis viewing
►Mounting versatility with bolt,
CT300
adhesive, or optional free standing
(3rd party) *
base
►Rapid mobility conversion (UNDOCK)
InVue Business Tablet
using electronic key or software control
Solutions
to undock from stand
►Stand has built-in alarm with optional
Contacts:
US: [email protected] Invue Complete Tablet alarm signal out
LATAM: [email protected] solution, with integrated ►Improve customer interaction with
EU: [email protected] mobile POS viewing adjustments, rapid mobility and
APAC: [email protected] mPOS
MEA: [email protected] ►Two USB 2.0 connections to support
peripherals and data connectivity
1.888.55.INVUE ►All frames come standard with a hand
strap, swivel capability, and the option
to use shoulder strap
►Optional Gang Charger allows up to 5
frames with payment device to charge
at once
►Single frame charge adapter keeps
tablet and optional peripheral charged,
charging indicator and an optional wall
mount bracket and counter stand
https://invue.com ►integrated with Verifone E355 and
ingenico iSMP4.

►Top clamp holds ET5X without

367-4172 (for ET5X with no interference of buttons.
Rugged Frame - Charge- ►Base of cradle provides the following
Only) ports:
Charge-Only - two 5V, 1.5A USB ports
367-4172-R (for ET5X with for charging additional devices, does
Rugged Frame - Charge- not provide communication to ET5X.
Only) Full Communications - three 5V, 1.5A
USB ports for communications, RJ45
367-4818 (for ET5X with no Ethernet.
Rugged Frame - Full ►Provides access to headphone jack
Communications) on ET5X.
ENS Locking Genesis Series ►Includes key lock for securing ET5X in
367-4818-R (for ET5X with Cradle Stand cradle.
Rugged Frame - Full ►Screen protected in clip
Communications) ►Can be installed in left or right
orientation.
(3rd party) * ►Compatible with Rugged Frame
Payment Device Attachment Bracket,
Contact: Bill Donehoo 367-4882 or 367-4899
office: 630-549-6258 ►Compatible with ET5X units with or
[email protected] without Expansion Backs installed.
►Compatible with 8" or 10" ET5X units.
►Includes power supply and US AC
Line Cord. Note - top picture shows
optional 7" pad base.

http://www.ens-co.com

EMC Product Line - ET5X TAG Page 5 of 27

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/4/19
 ►Lower profile design than standard
Genesis series cradles.
►Top clamp holds ET5X without
367-4682 (for ET5X with no
interference of buttons.
Rugged Frame)
►Base of cradle provides the following
ports:
367-4682-R (for ET5X with
Charge-Only - two 5V, 1.5A USB ports
Rugged Frame)
for charging additional devices, does
not provide communication to ET5X.
367-4819 (for ET5X with no
Full Communications - three 5V, 1.5A
Rugged Frame - Full
USB ports for communications, RJ45
Communications)
Ethernet.
►Provides access to headphone jack
367-4819-R (for ET5X with ENS Low-Profile Locking
on ET5X.
Rugged Frame - Full Genesis Series Stand
►Includes key lock for securing ET5X in
Communications)
cradle.
►Screen protected in clip
(3rd party) *
►Can be installed in left or right
orientation.
Contact: Bill Donehoo
►Compatible with Rugged Frame
office: 630-549-6258
Payment Device Attachment Bracket,
[email protected]
367-4882 or 367-4899
►Compatible with ET5X units with or
without Expansion Backs installed.
►Compatible with 8" or 10" ET5X units.
http://www.ens-co.com ►Includes power supply and US AC
Line Cord.
ET5X 4-SLOT CHARGE ONLY CRADLE ►Provides charging
INSTALLATION GUIDE ►Does NOT charge spare battery.
►Compatible with both 8" and 10"
Parts Guide Installation
tablets. Includes 4 tablet guides for 8"
and 10" ET5X units.
The cradle comes with four 8” tablets guide and four 10” tablet
guides.►Connects to charging
Install the appropriate guidescontacts on
for the tablets. ►DC Line Cord (CBL-DC-
bottom of tablet. 382A1-01) and Power Supply
1. Align the two tabs on the guide with the two slots in the
►Compatible with devices with or
cradle.
(PWR-BGA12V108W0WW)
without Rugged Frames and also ►AC Line Cord (23844-00-
supports devices with or without 00R)
Expansion Backs. Includes 4
Four Slot Charge-Only
CRD-ET5X-SE4CO1-01 shims/inserts to be used with ET5X For charging Spare
ShareCradle
units without the Rugged Frame. PowerPack batteries:
►Includes
Guide Tab adapter cup in far left Four Slot PowerPack battery
position for optional 4-Slot PowerPack charger (SAC-ET5X-4PPK1-
8” Tablet Guides (4) Inserts (4) Cradle
10” Tablet Guides (4)
battery charger (SAC-ET5X-4PPK1-01) 01), Power Supply (PWRS-
►NOTE: PWR-BGA12V108W0WW / 14000-148C), and AC Line
PWRS-14000-241R power supply will Cord (23844-00-00R)
Insert Installation only charge four ET5x units. Separate
Install inserts into slots for ET5X tablets without Rugged Frame. PWR-BGA12V50W0WW / PWRS-
14000-148C power supply required to
power Four-Slot PowerPack battery
charger.

►Power Supply (PWR-

2. Place the guide down onto the cradle and then rotate the
BGA12V50W0WW
and CBL-
guide until it snaps into the cradle.
►Charges up to 4 PowerPack batteries DC-388A1-01
Four-Slot PowerPack Battery
SAC-ET5X-4PPK1-01 ►Can be used standalone or can be OR
Charger
mounted to ShareCradle system PWRS-14000-148C)
►AC Line Cord (23844-00-
00R)

►Allows for rack and wall mounting of

all Multi-Slot ShareCradles OR can be
used to mount up to four 4-Slot
PowerPack Battery Chargers.
►Bracket can be mounted on standard
19" network rack or on a wall.
Multi-Slot ShareCradle
BRKT-SCRD-SMRK-01 ►Cable routing slots & removable
Mounting Bracket
power supply tray.
►Adjustable tabs & screw mounts for
easy hanging/installation with ability to
support one Multi-Slot ShareCradle or
four 4-Slot Battery Chargers and their
power supplies.

EMC Product Line - ET5X TAG Page 6 of 27

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/4/19
 ►Can be used to charge ET50/ET55
via the USB port on the side of the
device.
►Provides both charging and USB
ET51/ET56
communication for Android OS tablets.
USB-C Cable for Charging USB Power Supply (PWR-
Provides only charging for Windows OS
(Windows OS) WUA5V12W0xx / PWR-
CBL-TC2X-USBC-01 tablets - no USB communication.
WUA5V6W0WW / PWRS-
►NOTE: This charging method is NOT
OR 124306-01R) or comparable.
OR supported when Powerpack Battery
(BTRY-ET5X-PRPK1-01) is installed in
ET51/ET56 Recommend using PWR-
CBL-TC5X-USBC2A-01 Expansion Back. A charge method
USB-C Cable for Charging WUA5V12W0xx power supply
using the charge contacts on the
and Communication (Android for faster charging.
bottom of the ET5X must be used
OS)
instead (i.e. Rugged Charge
Connector/Charge Dongle, etc.).
►Only compatible with ET51/ET56, use
micro be
►Can USB cable
used to for ET50/ET55.
charge ET50/ET55
via the USB port on the side of the
device.
►Provides both charging and USB
communication for Android OS tablets.
Provides only charging for Windows OS
ET50/ET55
tablets - no USB communication.
Micro USB Cable for USB Power Supply (PWR-
►NOTE: This charging method is NOT
Charging (Windows OS) WUA5V12W0xx / PWR-
25-124330-01R supported when Powerpack Battery
WUA5V6W0WW / PWRS-
(BTRY-ET5X-PRPK1-01) is installed in
OR 124306-01R) or comparable.
OR Expansion Back. A charge method
using the charge contacts on the
ET50/ET55 Recommend using PWR-
25-MCXUSB-01R bottom of the ET5X must be used
Micro USB Cable for WUA5V12W0xx power supply
instead (i.e. Rugged Charge
Charging and for faster charging.
Connector/Charge Dongle, etc.).
Communication (Android OS)
►Only compatible with ET50/ET55, use
USB-C cable for ET51/ET56.

►Can also be used to charge

Powerpack Battery for Expansion Back
(BTRY-ET5X-PRPK1-01) via micro USB
To charge via AC power
►Power Supply (PWR-
►Connects to charge contacts on
BGA12V50W0WW and CBL-
bottom of ET5X.
DC-388A1-01)
►Barrel jack connector on side of
►AC Line Cord (23844-00-
Charge Dongle accepts power cord.
00R)
Rugged Charge ►Works with ET5X units with and
CHG-ET5X-CBL1-01
Connector/Charge Dongle without Rugged Frames.
To charge in a vehicle
►Includes shim which should be used
►12-24V Cigarette Lighter
with devices without the Rugged Frame
Adapter (1063406-031)
(SG-ET5X-8RCSE1-02 or SG-ET5X-
OR
10RCSE1-01) attached.
►12-24V Bare Wire Vehicle
Adapter (1063406-030)
►Discontinued 9/2018
►Allows ET50 to be used as a wall
mounted kiosk.
►This is a custom SKU - may required a
CPR in order to sell to additional
customers. Work with your Zebra
representative.
►Includes:
- 8" ET50 Windows 8.1 tablet
- Wall mount enclosure with 4 75mm
VESA mounting holes
ET50NE-W22E-MT01 - Integrated downward facing SE3307
ET50 8" Kiosk
(CPR may be required) scanner (same scanner as CC5000
Android Kiosk)
- Power supply
►Bottom rear of enclosure provides the
following connections:
- Power (power supply included)
- Ethernet (PoE not supported)
- HDMI
- One USB-A 3.0
►Access to ET50's side micro-USB and
USB-A ports are blocked by wall mount
enclosure.

EMC Product Line - ET5X TAG Page 7 of 27

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/4/19
 B
►Cradle/Holders for ET5X (8” and 10”)
for Vehicle/Forklift/Wall and Desktop
installations
►Variety of cradle options:
- With/without Rugged Frame
(standard
or rugged connectors)
- With/without Expansion Back To charge via AC power
- Access to Expansion Back Scanner ►Power Supply (PWR-
while in cradle BGA12V50W0WW and CBL-
ProClipt various SALES CONTACT: JASON BRIDWELL (608) 350-1919 ProClip ET5X Cradle - Wall, Cigarette Lighter, or Hard Wired DC-388A1-01) or use
Zebra ET5x 10.1 Charging Cradle on Pedestal Mount Vehicle power (12V-48V) supply comparable ProClip version
(3rd party) *
ProClip USA, 4915 Voges Road, Madison, WI 53718 www.proclipusa.com solutions
(800) 296-3212
(shown here with Rugged Frame) options (see website)
- Key Locking option ►AC Line Cord (23844-00-
- ProClip Heavy and Super Duty 00R)
Pedestal ready
- VESA and AMPS mounting ready To charge in a vehicle
- Integrated USB port option - single ►ProClip 12-24V Cigarette
port Lighter Adapter (941022)
(for Printer, Keyboards, mouse, OR
scanners) ►ProClip 12-24V Bare Wire
- Keyboard mount support for most Vehicle Adapter (941021)
common keyboards (iKey) also
available (241372).
See Zebra's ProClip accessory
overview video at: ►USB port provides 900 mAh current -
will NOT power DS3508-ER scanner or
DS3608-ER scanner in default power
http://www.proclipusa.com/category/zebra https://www.brainshark.com/zebratechnologies/vu?pi=zH1z9b2FfzOwdGz0 mode - DS3608-ER will need to use ER
Low Power option to work properly.

241372 ►Adjustable keyboard tray with AMPS

holes for various keyboards
(3rd party) * ►Can be used with most ProClip tablet
ProClip Keyboard Mount
holders
►Multiple AMPS hole patterns and
VESA 75 & 100 for easy mounting
SALES CONTACT: JASON BRIDWELL (608) 350-1919

ProClip USA, 4915 Voges Road, Madison, WI 53718 www.proclipusa.com (800) 296-3212

https://www.proclipusa.com

EMC Product Line - ET5X TAG Page 8 of 27

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/4/19
 ►For vehicle/fork lift operations
►Models with Full Port Replication
provide the following ports:
- Power (barrel jack)
Gamber Johnson - 2 USB
To Power Cradle:
(3rd party) * - 1 powered serial port (via Pin 9)
MATERIAL HANDLING SOLUTIONS - HDMI
Via vehicle:
►3rd party Lind power supply,
(for 8" tablet) - 1 Ethernet port
available from Gamber
7160-0861-00 - with power ►Models with 'Lite' Port Replication
Johnson for 12-32 VDC, 20-
and Full Port Replication provide the following ports:
60 VDC, or cigarette lighter
7160-0788-00 - with power - Power (barrel jack)
adapter.
and 'Lite' Port Replication - 3 USB
Via wall outlet:
- 1 Ethernet port
►Power Supply (PWR-
(for 10" tablet) ►The USB port closest to power jack
BGA12V50W0WW and CBL-
7160-0860-00 - with power Gamber Johnson Rugged will provide 1.2A current (can power
DC-388A1-01)
and Full Port Replication Mount Forklift Cradle DS3508-ER/DS3608-ER in default full
►AC Line Cord (23844-00-
7160-0773-00 - with power power mode).
00R)
and 'Lite' Port Replication ►The powered serial port is capable of
7160-0818-04 - provides providing enough current for the
For cradles with Full or Lite
power only DS3508-ER/DS3608-ER in default full
Port Replication:
7160-0818-00 - unpowered power mode .
ET5X must use Rugged
►Support for serial port requires driver
Frame w/Rugged I/O
Additional SKUs include installation from
connector (SG-ET5X-8RCSE1-
various power supply http://www.gamberjohnson/product-
02 or SG-ET5X-10RCSE1-01)
options support. Android ET5X will require the
driver to be integrated with the
For Un-Powered or Power-
application needing serial port support.
Only cradles:
►Uses 75mm VESA hole pattern for
ET5X must use Rugged
attaching RAM mounts and other
Frame w/Standard connector
brackets.
(SG-ET5X-8CSE1)
►Includes key lock
OR
►Cradle models with Full Port
Rugged Frame with rugged
replication have Rugged POGO pin
http://www.gamberjohnson.com I/O connector (SG-ET5X-
connector. Requires ET5X with
8RCSE1-02 / SG-ET5X-
Rugged Frame and rugged I/O port.
10RCSE1-01)
►Un-powered or charge-only cradle
models require ET5X with Rugged
Frame (standard or rugged I/O port).
►Optional keyboard mount for iKey
keyboards also available.

Gamber Johnson ►Thermal tablet cover features

(3rd party) * revolutionary technology that keeps
the ET5X warm in cross dock and
7160-0981 freezing environments.
Gamber Johnson Thermal ►Encases the Forklift Cradle and has a
(for 8" Forklift Cradle)
Cover for Forklift Cradle thermal pad heater connected to a
Gamber Johnson Rugged
7160-0982 thermostat that begins regulating heat
Mount Forklift Cradle
(for 10" Forklift Cradle) around the cover if the outside ambient
temperature is below 40°F (4.4°C).
►Cover ensures the ET5X will always
stay warm and be in its optimum
http://www.gamberjohnson.com operating temperature, even in
freezing environments.

EMC Product Line - ET5X TAG Page 9 of 27

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/4/19
 ►Accessory attaches to the back of the
Gamber-Johnson Fork Lift Cradle and
provides screen blanking function to
turn off ET5X display while the vehicle
is in motion.
►Includes bracket with accellerometer.
Acellerometer conects to ET5X via
Gamber Johnson USB port on cradle.
Gamber Johnson Screen
(3rd party) * ►Bracket blocks user access to USB
Blanking accessory for
Forklift Cradle ports on cradle to prevent tampering
7160-1146 Gamber Johnson Rugged
with attached accessories (i.e.
Mount Forklift Cradle
accellerometer).
►Requires installation of IPC/VuLock
software on ET5X to handle screen
blanking function. Application is
available from Gamber-Johnson and
supports Windows 8.1, Windows 10,
and Android devices.
►Compatible with either 8" or 10"
http://www.gamberjohnson.com Gamber-Johnson ET5X cradles with
Port Replication.
►Attaches to the back of any Gamber-
Johnson Tablet Docking Stations and
Cradles using the 75mm VESA
pattern.
►The Tablet Keyboard Mount can be
placed on any Gamber-Johnson Upper
Pole, Motion Attachment or “smiley
face” pattern found on a MCS Console
System (ordered separately) allowing
flexibility in how you want to place the
keyboard in a vehicle
►Keyboard attaches using a circular
Gamber Johnson mounting disk that has the AMPS hole
(3rd party) * Gamber Johnson Keyboard pattern on it
Mounting Tray for Forklift ►A tension knob is used to secure the
7160-0799 Cradle Gamber Johnson Rugged
keyboard to the tray and allows the
Mount Forklift Cradle
keyboard to be rotated to an
ergonomic position and locked into
place
►An offset mounting pattern on the
mounting disk provides adjustability to
position the keyboard closer to the
Docking Station or Cradle
►Keyboard can be tilted down 10° for
working or 90° vertically when stowed,
adjustable handle secures keyboard at
the desired position
►Heavy gauge steel and aluminum
construction for long-term durability
http://www.gamberjohnson.com ►Black powdercoat finish for maximum
corrosion resistance

EMC Product Line - ET5X TAG Page 10 of 27

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/4/19
 ►Attaches to the back of any Gamber-
Johnson Tablet Docking Stations and
Cradles using the 75mm VESA
pattern.
►Lower profile design allows keyboard
Gamber Johnson to be mounted in a vertical position
(3rd party) * Gamber Johnson Keyboard directly under the ET5X Cradle.
Bracket for Forklift Cradle ►Keyboard attaches using a circular
7160-0984 (Low Profile) Gamber Johnson Rugged
mounting disk that has the AMPS hole
Mount Forklift Cradle
pattern on it
►Rotating 3” arm and Mini Clevis
provides independent keyboard
adjustability
►Heavy gauge steel and aluminum
construction for long-term durability
►Black powdercoat finish for maximum
corrosion resistance

http://www.gamberjohnson.com

Communication Cables

Part Number Picture Description Notes Required Items

►Typically used with ET5X Forklift
cradles (i.e. Gamber-Johnson).
►Cable rated for 1.2A current
►Coiled cable is 12 ft long when
extended
►Rated to -30ºC for freezer
environment use.
►When connected to
ET5X to 36xx Series STB3678/FLB3678, will charge a fully
CBA-UF8-C12ZAR
Scanner Cable (USB) depleted battery in about 4.5 hours if
host USB port is BC 1.2 compatible or
about 10.5 hours for USB 2.0 host
ports.
►Capable of powering DS3608-ER in
default full power mode only when
used with Gamber-Johnson Forklift
Cradle (plug into high power USB port).
For other cradles, scanner must use
►Typically used with ET5X Forklift
cradles (i.e. Gamber-Johnson).
►Cable rated for 1.2A current
►Coiled cable is 12 ft long when
extended
►Rated to -30ºC for freezer
environment use.
►When connected to
STB3678/FLB3678, will charge a fully
ET5X to 36xx Series
CBA-UF6-C12ZAR depleted battery in about 4.5 hours if
Scanner Cable (USB)
host USB port is BC 1.2 compatible or
about 10.5 hours for USB 2.0 host
ports.
►Capable of powering DS3608-ER in
default full power mode only when
used with Gamber-Johnson Forklift
Cradle (plug into high power USB port).
For other cradles, scanner must use
ER low power mode option.

EMC Product Line - ET5X TAG Page 11 of 27

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/4/19
 ►Typically used with ET5X Forklift
cradles (i.e. Gamber-Johnson).
►Capable of powering D3508-ER only
Generic Cable to Scanners
CBA-U12-C09ZAR when used with Gamber-Johnson
34xx/35xx Cable (USB)
Forklift Cradle (plug into high power
USB port).
►9 ft long when extended

►Typically used with ET5X Forklift

cradles (i.e. Gamber-Johnson).
►Capable of powering D3508-ER only
Generic Cable to Scanners
CBA-U09-C15ZAR when used with Gamber-Johnson
34xx/35xx Cable (USB)
Forklift Cradle (plug into high power
USB port).
►15 ft long when extended

►Connects to powered serial port on

Gamber-Johnson forklift cradle with Full
Port Replication. Cradle provides
ET5X Gamber-Johnson Gamber-Johnson Forklift
power to scanner on pin 9.
CBA-R71-C09ZAR Forklift Cradle to 36xx Series Cradle with Full Port
►Provides enough power for DS3608-
Scanner Cable (Serial) Replication
ER in default power mode.
►9 ft. coiled cable
►Not supported on Android ET5X units.

►Rated to -30ºC for freezer

environment use.
►Connects to powered serial port on
ET5X Gamber-Johnson Gamber-Johnson forklift cradle with Full
Gamber-Johnson Forklift
Forklift Cradle to 36xx Series Port Replication. Cradle provides
CBA-RF2-C09ZAR Cradle with Full Port
Scanner Cable (Serial) power to scanner on pin 9.
Replication
(Freezer Rated) ►Provides enough power for DS3608-
ER in default power mode.
►9 ft. coiled cable
►Not supported on Android ET5X units.

►Connects to powered serial port on

Gamber-Johnson forklift cradle with Full
Port Replication. Cradle provides
power to scanner on pin 9.
ET5X Gamber-Johnson Gamber-Johnson Forklift
►Provides enough power for DS3508-
CBA-R37-C09ZAR Forklift Cradle to 34xx/35xx Cradle with Full Port
ER.
Series Scanner Cable (Serial) Replication
►9 ft. coiled cable
►Includes improved strain relief design
from CBA-R36-C09ZAR.
►Not supported on Android ET5X units.

►Discontinued 3/2013, now use CBA-

R37-C09ZAR
►Connects to powered serial port on
Gamber-Johnson forklift cradle with Full
ET5X Gamber-Johnson Gamber-Johnson Forklift
Port Replication. Cradle provides
CBA-R36-C09ZAR Forklift Cradle to 34xx/35xx Cradle with Full Port
power to scanner on pin 9.
Series Scanner Cable (Serial) Replication
►Provides enough power for DS3508-
ER.
►9 ft. coiled cable
►Not supported on Android ET5X units.

►Connects to USB port on ET5X

ZQ6/QLn Series Printer USB
P1031365-055 ►6 ft. straight cable
Cable

EMC Product Line - ET5X TAG Page 12 of 27

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/4/19
 ►Connects to contacts on bottom of
ET5X and provides DEX capability.
►Does not support charging of ET5x
►ET5X must use Rugged
unit.
Rugged DEX Connector Frame w/Rugged I/O
CBL-ET5X-DEX1-01 ►NOTE: This is a custom product.
Cable Dongle connector (SG-ET5X-8RCSE1-
Please work with your Zebra
02 or SG-ET5X-10RCSE1-01)
representative to open a Custom
Product Request (CPR) if you would
like to order this item.

►Requires no separate power supply, has

grounded wiring from both the USB and
Ethernet ports, and operates on very low
power draw directly from the USB
connection.
►Molded end caps enable the adapters to
PSA1U1E be aligned side by side or top to bottom, for
(3rd party) * efficient use of desktop space and
Portsmith Desktop USB
organization of cables.
Ethernet Adapter
►PSAK-UCE KIT includes: PSA1U1E
adapter and three USB cables for
connecting to a variety of devices.
►Can connect directly to ET5X (via USB
port)
►ET5X does not support network boot
http://www.portsmith.com option with adapter. Use CRD-ET5X-
1SCOM1 for this.

►10/100 Mbps Ethernet with RJ45

Connection
►Extreme temperature ratings and
PSA1U1E-E sealed and enclosed electronics make
(3rd party) * Portsmith Rugged USB-A to for a durable solution
Ethernet Adapter ►Can connect directly to ET5X (via
USB port)
►ET5X does not support network boot
option with adapter. Use CRD-ET5X-
http://www.portsmith.com
1SCOM1 for this.

Expansion Back Accessories / Attachments

Part Number Picture Description Notes Required Items

►No scanner
ZBK-ET5X-8RH1-01 ►Replaces existing battery door and
(for 8" tablet) screws down to back of tablet.
Expansion Back with
►Cap/Plug covers Powerpack battery
Rotating Hand strap
ZBK-ET5X-10RH1-01 compartment. Remove cap if using
(for 10" tablet) optional Powerpack battery (BTRY-
ET5X-PRPK1-01)

►Only compatible with Windows 8.1 or

Windows 10 ET5X units. Scanner
connects to ET5X as standard USB
ZBK-ET5X-8SCN1-01 HID device (i.e. emulates keyboard).
(for 8" tablet) SE4710 Scanner Expansion ►Uses SE4710 Scan engine
Back with Rotating Hand ►Replaces existing battery door and
ZBK-ET5X-10SCN1-01 strap - For Windows OS screws down to back of tablet.
(for 10" tablet) ►Cap/Plug covers Powerpack battery
compartment. Remove cap if using
optional Powerpack battery (BTRY-
ET5X-PRPK1-01)

EMC Product Line - ET5X TAG Page 13 of 27

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/4/19
 ►Only compatible with Windows 8.1 or
Windows 10 ET5X units. Scanner
connects to ET5X as standard USB
HID device (i.e. emulates keyboard).
ZBK-ET5X-8SCN5-01
►Uses SE4750 SR (Standard Range)
(for 8" tablet) SE4750 Scanner Expansion
Scan engine
Back with Rotating Hand
►Replaces existing battery door and
ZBK-ET5X-10SCN5-01 strap - For Windows OS
screws down to back of tablet.
(for 10" tablet)
►Cap/Plug covers Powerpack battery
compartment. Remove cap if using
optional Powerpack battery (BTRY-
ET5X-PRPK1-01)
►Only compatible with Android ET5X
units. Scanner connects to ET5X
using SSI via USB interface (i.e. uses
DataWedge).
ZBK-ET5X-8SCN5-02
►Uses SE4750 SR (Standard Range)
(for 8" tablet) SE4750 Scanner Expansion
Scan engine
Back with Rotating Hand
►Replaces existing battery door and
ZBK-ET5X-10SCN5-02 strap - For Android OS
screws down to back of tablet.
(for 10" tablet)
►Cap/Plug covers Powerpack battery
compartment. Remove cap if using
optional Powerpack battery (BTRY-
ET5X-PRPK1-01)
►Provides an integrated payment
solution.
►Compatible with 8" versions of ET5X
Windows 10 tablet. Not compatible
with Windows 8.1 or Android versions.
►USB connection between ET5X and
e355.
►e355 will be charged from ET5X when
ET5X is in dock/charger.
►ET5X will fit into both Single and 4-
Slot docks with payment back
attached.
►Uses scanner built into e355 unit.
367-4406 ►Ergonomic button placement for
(3rd party) * scanner triggers with texturized finger ET5X must use Rugged
ENS Payment Back for
grip. Frame w/Rugged I/O
Verifone e355 Payment
Contact: Bill Donehoo ►Payment Back attaches to back of connector (SG-ET5X-8RCSE1-
Device
office: 630-549-6258 ET5X Rugged Frame via four screws 02)
[email protected] on each corner of the Rugged Frame
and one screw under battery door.
►Additional screw provides lock-out to
prevent e355 quick-release.
►Payment Back also provides tether
point for D-Clips (SG-ET5X-DCLIP-01),
allowing shoulder straps, handle strap,
etc. to be used.
►Not compatible with other Expansion
Back accessories.
►Scanning can be added to ET5X
using e355 barcode enabled payment
device from Verifone.
►Not compatibile with Operations Case.
►Does not provide compartment for the
Powerpack battery (BTRY-ET5X-
http://www.ens-co.com https://www.ens-co.com/products/browse-by-product-family/vergefamily/verge4406/ PRPK1-01)
►Overall dimensions with devices:
2.426 lbs. (.504 lbs case only), 2.006
in. W x 9.7 in. L x 6.664 in. H
►Integrated MSR for payment
transaction support with encrypted
head
►Non-encrypted variant suitable for
(3rd party) * ArmorActive MSR (Magnetic magnetic card reading – e.g. loyalty
Strip Reader) Expansion cards, identification cards etc.
Back ►Replaces existing battery door and
screws down to back of tablet.
►Does not provide compartment for the
Powerpack battery (BTRY-ET5X-
http://www.armoractive.com/zebra PRPK1-01)

EMC Product Line - ET5X TAG Page 14 of 27

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/4/19
 ►Adds enhanced device security and
chip card reading.
(3rd party) * ArmorActive SRC (Smart ►Replaces existing battery door and
Card Reader) Expansion screws down to back of tablet.
Back ►Does not provide compartment for the
Powerpack battery (BTRY-ET5X-
PRPK1-01)
http://www.armoractive.com/zebra
►Payment Accessory Cover can be
ordered to hold various payment
terminals including:
- Ingenico iCMP
- Miura M010
- PAX D180
(3rd party) *
ArmorActive PAC (Payment - Verifone e355
Accessory Cover) ►Payment terminal connects to ET5X
via Bluetooth.
►Replaces existing battery door and
screws down to back of tablet.
►Does not provide compartment for the
Powerpack battery (BTRY-ET5X-
http://www.armoractive.com/zebra
PRPK1-01)
►Expansion Back enables ET5X to be
docked in ArmorActive RapidDoc Pro
Kiosk
►Various versions available that
provide:
- Handstrap
- Handstrap with Verifone e355 holder
- Handstrap with Ingenico SMP holder
►Payment terminal connects to ET5X ArmorActive RapidDoc Kiosk
various
ArmorActive RapidDoc Pro via Bluetooth or USB connection. Stand (see Cradles/Charging
(3rd party) *
Kiosk Expansion Back ►Replaces existing battery door and section above)
screws down to back of tablet.
►Not compatible with other Expansion
Back accessories.
►Scanning can be added to ET5X
using barcode enabled payment
device from Verifone or Ingenico.
►Does not provide compartment for the
Powerpack battery (BTRY-ET5X-
http://www.armoractive.com/zebra
PRPK1-01)
Soft Goods

Part Number Picture Description Notes Required Items

►Adjustable and 360-degree rotatable

handstrap that mounts on
Replacement Rotating Hand
SG-ET5X-RHTP1-01 the back of the ET5X and provides Expansion Back attachment
Strap for Expansion Back
secure option for holding the
device.

EMC Product Line - ET5X TAG Page 15 of 27

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/4/19
 ►Allows tablet to be carried in three
ways:
1. Via hand using Handle Strap (not
included)
2. On shoulder using Strap (not
included)
Handle Strap (SG-ET5X-
3. Across body using Strap (not
HNDSTP-01)
included)
SG-ET5X-8HLST-01 OR
►Made of a leatherette material
(for 8" tablet) Breakaway Shoulder Strap
►Only supports tablet without Rugged
Operations Case (SG-ET5X-SHDRSTP-01)
Frame installed
SG-ET5X-10HLST-01 OR
►Pen loop for stylus
(for 10" tablet) Universal Shoulder
►Supports devices with Expansion
Strap/Cross Body Strap (58-
Back attached
40000-007R)
►Four D Rings on each corner of case -
supports wearing on shoulder, cross
body etc. and also provide universal
mounting points to accommodate
accessories like CS4070 or PD40 in a
separate pouch

(3rd party) *
See Agora/Ultima Case site for
Additional Holsters for ET5X
additional holstering options
http://www.ultimacase.com

For use with Rugged Frames:

►Provides ease of carrying the tablet ►Rugged Frame
with plastic grips ►D-Clips (SG-ET5X-DCLIP-01)
SG-ET5X-HNDSTP-01 Handle Strap
►Can be used with Rugged Frames or
Operations Case For use with Operations Case:
►Operations Case

►Used with Operations Case or For use with Rugged Frames:

Rugged Frame with D-Clips ►Rugged Frame
►Has points near the clip that break ►D-Clips (SG-ET5X-DCLIP-01)
SG-ET5X-SHDRSTP-01 Breakaway Shoulder Strap
when pulled - this is a safety feature for
the user For use with Operations Case:
►Operations Case

EMC Product Line - ET5X TAG Page 16 of 27

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/4/19
 For use with Rugged Frames:
►Used with Operations Case or ►Rugged Frame
Universal Shoulder Rugged Frame with D-Clips ►D-Clips (SG-ET5X-DCLIP-01)
58-40000-007R
Strap/Cross Body Strap ►1.5" wide, 22 to 50" max. length
►Does not use breakaway design For use with Operations Case:
►Operations Case "

►Clips screw onto Rugged Frames and

provide attachment point for
Breakaway Shoulder Strap (SG-ET5X-
SG-ET5X-DCLIP-01 D-clips for Rugged Frame SHDRSTP-01), Handle Strap (SG-
ET5X-HNDSTP-01), or Universal
Shoulder Strap (58-40000-007R)
►Includes 2 clips with screws
►Increases drop spec to 6 ft. (1.8m)
►Replaces standard I/O connector and
I/O connector dust cover with rugged
SG-ET5X-8RCSE2-02 contact pad connectors
(for 8" tablet) ►Rugged POGO pin connector
accessories required when using this
frame
►Compatible with devices with
Rugged Frame with Rugged
Expansion Backs attached.
I/O connector
►Includes screw points on back to
attach optional D-Clips for optional
Handle Strap or Shoulder Strap
SG-ET5X-10RCSE2-01 ►Uses updated Rugged I/O Connector
(for 10" tablet) (SG-ET5X-RGIO1-02) which provides
greater stability and improved reliability
vs. SG-ET5X-8RCSE1-02 and SG-
ET5X-10RCSE1-01.

SG-ET5X-8RCSE1-02
►Increases drop spec to 6 ft. (1.8m)
(for 8" tablet)
►Replaces standard I/O connector and
I/O connector dust cover with rugged
►Discontinued 2/2019, now
contact pad connectors
use SG-ET5X-8RCSE2-02 -
►Rugged POGO pin connector
see PMB 10096.
Rugged Frame with Rugged accessories required when using this
I/O connector frame
SG-ET5X-10RCSE1-01 ►Compatible with devices with
(for 10" tablet) Expansion Backs attached.
►Includes screw points on back to
►Discontinued 2/2019, now attach optional D-Clips for optional
use SG-ET5X-10RCSE2-01 Handle Strap or Shoulder Strap
- see PMB 10096.
►Discontinued 2/2016, now use SG-
ET5X-8RCSE1-02
►Increases drop spec to 6 ft. (1.8m)
►Two piece design is secured around
tablet with torx screws (T6 size blade)
SG-ET5X-8CSE1
►Notch in frame allows existing I/O and
(for 8" tablet)
Rugged Frame charging connectors on bottom of
tablet to be used.
►Compatible with devices with
Expansion Backs attached.
►Includes screw points on back to
attach optional D-Clips for optional
Handle Strap or Shoulder Strap

EMC Product Line - ET5X TAG Page 17 of 27

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/4/19
 ►Replaces I/O connector on Rugged
Frame with Rugged I/O Connector
►Can also be used to add Rugged I/O
connector to a Rugged Frame without
the rugged connector.
►This is a spare/replacement
connector. It is included with Rugged
Replacement Rugged I/O
Frames with Rugged I/O connector (SG-
SG-ET5X-RGIO1-02 Connector for Rugged Rugged Frame
ET5X-8RCSE1-02 and SG-ET5X-
Frames
10RCSE1-01).
Connector is compatible with all
Rugged Frames, including SG-ET5X-
8CSE1, SG-ET5X-8RCSE1-02 and SG-
ET5X-10RCSE1-01.
►Provides greater stability and
improved reliability vs. SG-ET5X-RGIO1-

►Replaces I/O connector on Rugged

Frame with Rugged I/O Connector
►Can also be used to add Rugged I/O
connector to a Rugged Frame without
Replacement Rugged I/O
the rugged connector.
SG-ET5X-RGIO1-01 Connector for Rugged Rugged Frame
►This is a spare/replacement
Frames
connector. It is included with Rugged
Frames with Rugged I/O connector (SG-
ET5X-8RCSE1-02 and SG-ET5X-
10RCSE1-01)

►Bracket attaches to back of ET5X

367-4882 Rugged Frame (on right side) for
(for Verifone e355) holding, charging and communicating
with payment device.
367-4899 ►Bracket provides USB connection to
(for Ingenico iSMP4) ET5X (USB-A port on side of tablet) for
charging and communication with
(3rd party) * Rugged Frame Payment payment device.
Device Attachment Bracket ►Includes security screw for preventing
Contact: Bill Donehoo payment device from being removed
office: 630-549-6258 from bracket.
[email protected] ►Compatible with ET5X units with or
without Expansion Backs installed.
►Compatible with 8" or 10" ET5X units,
includes mounting plate for both size
tablets.

http://www.ens-co.com

EMC Product Line - ET5X TAG Page 18 of 27

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/4/19
 Zebra ET5x 10.1 Charging Sleeves
Item # Description Zebra ET5x 10.1 Charging Img
Sleeves
MSRP
561900 TOUGH SLEEVE, ET5X 10.0, NO LOCK, USBItem
AND#BARREL IN PWR BLOCK
Description G $229.99 Img MSRP

562900 TOUGH SLEEVE, ET5X 10.1, KEY LOCK, USB 561900

AND BARREL INSLEEVE,
TOUGH PWR BLOCK H BARREL
ET5X 10.0, NO LOCK, USB AND $249.99
IN PWR BLOCK G $229.99

562900
552883 KIOSK SLEEVE, ET5X 10.1, KEY LOCK, USB AC TOUGH
ADAPTER, SLEEVE, ET5X 10.1, KEY LOCK, USB AND
ETHERNET I BARRELTBA
IN PWR BLOCK H $249.99

Protect and Power the Tablet 552883 KIOSK SLEEVE, ET5X 10.1, KEY LOCK, USB AC ADAPTER, ETHERNET I TBA
Heavy Duty ABS Construction Protect and Power the Tablet CLICK HERE TO VIEW PRODUCT
Electromechanical ‘Sliding Power Block’ Docking Interface
Heavy Duty ABS Construction
PAGES AT ProClipUSA.COM
Electromechanical ‘Sliding Power Block’ Docking Interface
CLICK HERE TO VIEW PRODUCT
Keyed Randomly Unless Requested Otherwise PAGES AT ProClipUSA.COM
Keyed Randomly Unless Requested Otherwise

►The ProClip Tough Sleeve Charging

Holder is a protective sleeve with a built-
in shock absorbing design that
eliminates the need for an extra case.
►Rugged and custom-machined ABS
3rd party * sleeves completely encapsulate and
ProClip Tough Sleeve Case
SALES CONTACT: JASON BRIDWELL (608) 350-1919
protect the tablet while simultaneously
ProClip USA, 4915 Voges Road, Madison, WI 53718 with integrated power
www.proclipusa.com (800) 296-3212

providing integrated power.

SALES CONTACT: JASON BRIDWELL (608) 350-1919 connector
ProClip USA, 4915 Voges Road, Madison, WI 53718 www.proclipusa.com (800) 296-3212
►Includes a quick release sliding power
block on the back, allowing the Tough
Sleeve to be easily removed from the
vehicle mount numerous times per day.
►Not compatible with Rugged Frame or
any Expansion Back Accessory.

http://www.proclipusa.com/category/zebra

Misc

Part Number Picture Description Notes Required Items

KT-ET5X-8SCRN1-01
(for 8" tablet without
►Film overlay
Rugged Frame installed)
►Protects screen from hazing,
KT-ET5X-8SCRN1-02
scratching, cracking
(for 8" tablet with Rugged
►Order correct SKU depending on
Frame installed)
Screen Protector for tablet display size and whether or not
ET50/ET55 tablets Rugged Frame will be used.
KT-ET5X-10SCRN1-01
►Only compatible with ET50/ET55
(for 10" tablet without
tablets. Not compatible with
Rugged Frame installed)
ET51/ET56 tablets.
KT-ET5X-10SCRN1-02
(for 10" tablet with Rugged
Frame installed)
►Discontinued 10/2018 - see PMB
10057.
►Designed to be used only with
ET50/ET55 Windows 10" tablet. Not
compatible with ET51/ET56 10"
Windows tablets, 8" Windows tablets or
Active Stylus any Android tablets (8" or 10").
KT-ET5X-ASTY1-01
(for 10" Windows units) ►Pen tip supports 256 levels of
pressure detection
►Uses one AAAA battery
►Supports palm rejection and will work
when water is on the display (will not
work in areas of screen where water is
pooled)
►Designed to be used only with
Android units (8" or 10"). Not
compatible with Windows units.
►Pen tip supports 256 levels of
Active Stylus pressure detection
KT-ET5X-ASTY2-01
(for Android units) ►Uses one AAAA battery
►Supports palm rejection and will work
when water is on the display (will not
work in areas of screen where water is
pooled)

EMC Product Line - ET5X TAG Page 19 of 27

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/4/19
 ►Includes fine-pitch, capacitive Stylus
(SG-TC7X-STYLUS1-03) and coiled
tether (KT-TC7X-TETHR1-03)
►Conductive Carbon-filled plastic
material w/ 5mm tip
►Length of stylus is 3.5".
►Rigid plastic stylus is optimized for
enterprise durability.
►Clip & tether point to reduce loss.
SG-TC7X-STYLUS-03
Passive Stylus Kit with Tether Tether to Handstrap on Expansion
(pack of 3) Back or D-Clip on Rugged Frame.
►NOTE: Stylus is only supported on
the following devices:
- ET51/ET56 Windows tablets
- ET51/ET56 Android tablets
- ET50/ET55 Android tablets running
Android M or higher. Requires Touch
Panel mode setting to be changed to
Stylus mode.

►Discontinued 2/2019 - see PMB

10057
►Conductive Carbon-filled plastic
material w/ 5mm tip
►Rigid plastic stylus is optimized for
enterprise durability.
►Clip & tether point to reduce loss.
►Clip & tether point to reduce loss.
SG-TC7X-STYEX1-3 Extended Length Passive Tether to Handstrap on Expansion
(pack of 3) Stylus Back or D-Clip on Rugged Frame.
►NOTE: Stylus is only supported on
the following devices:
- ET51/ET56 Windows tablets
- ET51/ET56 Android tablets
- ET50/ET55 Android tablets running
Android M or higher. Requires Touch
Panel mode setting to be changed to
Stylus mode.

►Use any passive stylus that is

designed to be used on tablets with
3rd party Passive Stylus capacitive touch screens.
►Compatible with all ET5X tablet
versions.

SG-ET5X-SLTETR-01 Coiled Tether for Stylus

►Prevents unauthorized access/use of

USB port on side of ET5X or on bottom
Locking USB port of Gamber-Johnson vehicle cradles.
3rd party *
cover/insert ►Requires "key" to install and remove
the USB insert
►Covers/inserts can be ordered in
different colors, each color having a
unique "key"
http://www.lindy-usa.com/usb-port-blocker-pack-of-4-color-code-white-40454.html

Power Cords/Power Supplies

Part Number Picture Description Notes Required Items

EMC Product Line - ET5X TAG Page 20 of 27

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/4/19
PWR-WUA5V12W0US
(US plug style)
PWR-WUA5V12W0GB
(UK plug style) ►Used to power ET5X from Micro-USB For ET50/ET55 or PowerPack
PWR-WUA5V12W0EU or USB-C port on side of device Battery
(EU plug style) ►Can also be used to charge Micro USB Cable (25-124330-
PWR-WUA5V12W0AU Powerpack Battery for Expansion Back 01R or 25-MCXUSB-01R)
(Australia plug style) USB Power Supply (high
(BTRY-ET5X-PRPK1-01) via micro USB
PWR-WUA5V12W0CN power)
port on side of battery. For ET51/ET56
(China plug style) ►Provides higher current (2.5A) for USB-C Cable (CBL-TC2X-
PWR-WUA5V12W0IN faster charging USBC-01 or CBL-TC5X-
(India plug style)
►100-240 VAC, 5 V, 2.5 A USBC2A-01)
PWR-WUA5V12W0KR
(Korea plug style)
PWR-WUA5V12W0BR
(Brazil plug style)

►Used to power ET5X from Micro-USB

or USB-C port on side of device
►Can also be used to charge
Powerpack Battery for Expansion Back
For ET50/ET55 or PowerPack
(BTRY-ET5X-PRPK1-01) via micro USB
Battery
port on side of battery.
Micro USB Cable (25-124330-
►Provides 1.2A output. Charging will
01R or 25-MCXUSB-01R)
be slower. Recommend using PWR-
PWR-WUA5V6W0WW USB Power Supply
WUA5V12W0xx for faster charging.
For ET51/ET56
►Includes four international plugs for
USB-C Cable (CBL-TC2X-
use in US, UK, EU, and AU. Additional
USBC-01 or CBL-TC5X-
plugs can be purchased separately for
USBC2A-01)
other countries.
►5.2V, 1.2A, 6W output
►Provides US DOE Level VI
compliance for power efficiency

Spare/Replacement USB ►This AC Clip is normally included with

USB Power Supply (PWR-
CN-000803-01 Power Supply AC Clip for PWR-WUA5V6W0WW
WUA5V6W0WW)
Australia (AUS) ►2 pin Australia plug

USB Power Supply AC Clip USB Power Supply (PWR-

CN-000803-02
for Argentina (ARG) WUA5V6W0WW)

USB Power Supply AC Clip USB Power Supply (PWR-

CN-000803-03
for Korea (KOR) WUA5V6W0WW)

Spare/Replacement USB ►This AC Clip is normally included with

USB Power Supply (PWR-
CN-000803-04 Power Supply AC Clip for US PWR-WUA5V6W0WW
WUA5V6W0WW)
(US) ►2 pin US plug

Spare/Replacement USB
►This AC Clip is normally included with USB Power Supply (PWR-
CN-000803-05 Power Supply AC Clip for
PWR-WUA5V6W0WW WUA5V6W0WW)
Europe (EU)

Spare/Replacement USB
►This AC Clip is normally included with USB Power Supply (PWR-
CN-000803-06 Power Supply AC Clip for UK
PWR-WUA5V6W0WW WUA5V6W0WW)
(UK)

USB Power Supply AC Clip USB Power Supply (PWR-

CN-000803-07 ►straight pins China plug
for China (CHN) WUA5V6W0WW)

USB Power Supply AC Clip USB Power Supply (PWR-

CN-000803-08 ►2 pin Brazil plug
for Brazil (BRA) WUA5V6W0WW)

EMC Product Line - ET5X TAG Page 21 of 27

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/4/19
 USB Power Supply AC Clip USB Power Supply (PWR-
CN-000803-09
for India (IND) WUA5V6W0WW)

►Used to power ET5X from Micro-USB

or USB-C port on side of device
►Can also be used to charge
For ET50/ET55 or PowerPack
Powerpack Battery for Expansion Back
Battery
(BTRY-ET5X-PRPK1-01) via micro USB
Micro USB Cable (25-124330-
port on side of battery.
01R or 25-MCXUSB-01R)
►Provides 1.2A output. Charging will
PWRS-124306-01R USB Power Supply
be slower. Recommend using PWR-
For ET51/ET56
WUA5V12W0xx for faster charging.
USB-C Cable (CBL-TC2X-
►Includes four international plugs for
USBC-01 or CBL-TC5X-
use in US, UK, EU, and AU
USBC2A-01)
►5V, 1.2A output
►Discontinued 3/2017, now use PWR-
WUA5V6W0WW

►Used along with Power Supply PWR-

BGA12V50W0WW to power Single Slot
Cradle, Rugged Charge
CBL-DC-388A1-01 DC Power Cord
Connector/Charge Dongle, and 4-Slot
Battery Charger.
►Cable length is 1.8 meters

►Used to power Single Slot Cradle,

Rugged Charge Connector/Charge
Dongle, and 4-Slot Battery Charger.
DC Line Cord (CBL-DC-388A1-
►100-240 VAC,12V, 4.16A, 50W
PWR-BGA12V50W0WW Power Supply 01) and AC Line Cord (23844-
►Provides US DOE Level VI
00-00R)
compliance for power efficiency.
►Replaces PWRS-14000-148R and
PWRS-14000-148C

►Includes Power Supply (PWR-

KIT-PWR-12V50W Power Supply Kit BGA12V50W0WW) and DC Line Cord AC Line Cord (23844-00-00R)
(CBL-DC-388A1-01)

►Discontinued 1/2017, now use PWR-

BGA12V50W0WW and CBL-DC-388A1-
01 - see PMB 2923 and PMB 2851
Power Supply with integrated ►Used to power Single Slot Cradles
PWRS-14000-148R
DC Cord and Rugged Charge Cable (CHG-ET5X-
CBL1-01)
►100-240 VAC,12VDC,3.33A
►Energy Star Compliant

►Discontinued 6/2016, now use PWRS-

14000-148R - see PMB 2820
Power Supply for Single Slot
PWR-WGA12V60W-1WW ►Used to power Single Slot Cradles
Cradle/Docking Station
►May be labeled with P/N KPL-060F
►12V, 5A output

►Discontinued 12/2007 - replaced by

KT-14000-148R
►Used to power Rugged Charge Cable
Power Supply with integrated (CHG-ET5X-CBL1-01)
50-14000-148R
DC Cord ►Can also be used to power Single
Slot Cradles for demo purposes only.
Not approved for deployments due to
regulatory approvals.

EMC Product Line - ET5X TAG Page 22 of 27

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/4/19
 ►Replaces 50-14000-148R
►Used to power Rugged Charge Cable
(CHG-ET5X-CBL1-01)
►Can also be used to power Single
Power Supply with integrated
KT-14000-148R Slot Cradles for demo purposes only.
DC Cord
Not approved for deployments due to
regulatory approvals.
►Discontinued 12/2010 - now use
PWRS-14000-148R

►Has additional ferrite from KT-14000-

148R to provide additional noise
supression.
►Used to power 4-Slot PowerPack
Battery Charger (SAC-ET5X-4PPK1-
Power Supply with integrated
PWRS-14000-148C 01) AC Line Cord (23844-00-00R)
DC Cord
►100-240 VAC,12VDC,3.33A
►Energy Star Compliant
►Discontinued 2/2017, now use PWR-
BGA12V50W0WW and CBL-DC-388A1-
01.
►Used to power 5-Slot ShareCradles
when using Level VI Efficiency power
supply (PWR-BGA12V108W0WW)
►This cable does not include the black
CBL-DC-381A1-01 DC Power Cord extension release latch which is not
required when used on Multi-Slot
ShareCradles.
►CBL-DC-382A1-01 is still typically
used though.

►Used with Power Supply PWR-

CBL-DC-382A1-01 DC Power Cord BGA12V108W0WW to power Multi-Slot
ShareCradles.

►Used with Power Supply PWRS-

14000-241R to power Multi-Slot
50-16002-029R DC Power Cord ShareCradles
►Discontinued 2/2017, now use CBL-
DC-382A1-01 - PMB 2851 and 2933

►Used to power Multi-Slot

ShareCradles
►100-240 VAC, 12V, 9A, 108W CBL-DC-382A1-01 and 23844-
PWR-BGA12V108W0WW Power Supply
►Provides US DOE Level VI 00-00R
compliance for power efficiency.
►Replaces PWRS-14000-241R

►Replaces 50-14000-241R
►Used to power Multi-Slot
ShareCradles
►100-240VAC,12VDC,9A
PWRS-14000-241R Power Supply
►Energy Star Compliant
►Discontinued 2/2017, now use PWR-
BGA12V108W0WW - PMB 2851 and
2933

►Discontinued 12/2007 - replaced by

50-14000-241R
50-14001-004R Power Supply
►Used to power Multi-Slot
ShareCradles

►Replaces 50-14001-004R
►Used to power Multi-Slot
50-14000-241R Power Supply ShareCradles
►Discontinued 12/2010 - now use
PWRS-14000-241R

EMC Product Line - ET5X TAG Page 23 of 27

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/4/19
23844-00-00R AC Line Cord

►Used with Rugged Charge Dongle

(CHG-ET5X-CBL1-01) to charge unit's
battery in a vehicle.
12-24V Car Charger Rugged Charge Dongle (CHG-
P1063406-031 ►Plugs into cigarette lighter.
(Cigarette Ligther Adapter) ET5X-CBL1-01)
►This is the same adapters used to
charge Zebra mobile printers in a
vehicle.

941022
(3rd party) * ►Used with ProClip ET5X Cradles to power
12-24V Car Charger
cradle in a vehicle.
(Cigarette Ligther Adapter)
►Plugs into cigarette lighter.

http://www.proclipusa.com/category/zebra

►Used with Rugged Charge Dongle

(CHG-ET5X-CBL1-01) to charge unit's
battery in a vehicle.
►This is the same adapters used to
charge Zebra mobile printers in a
12-24V Car Charger vehicle. Rugged Charge Dongle (CHG-
P1063406-030
(Bare Wire connectors) ►NOTE: As of 9/2017 this charger has ET5X-CBL1-01)
not been officially approved by Zebra
Engineering for use with the ET5X.
Please have your Zebra account team
open a Custom Products Request if
you would like this charger certified.

941021
(3rd party) * 12-24V Vehicler Charger ►Used with ProClip ET5X Cradles to power
(Bare Wire connectors) cradle in a vehicle.

http://www.proclipusa.com/category/zebra

Keyboards - Used with Gamber-Johnson Fork Lift Cradle

Part Number Picture Description Notes Required Items

EMC Product Line - ET5X TAG Page 24 of 27

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/4/19
 ►Based on the VH10 keyboard design.
►12 direct Function keys with an
additional 12 via shift function.
►Dimmable backlit keys.
►IP66, -30 to +50 C, condensing - for
use in Freezer Applications
►Build-in heaters and drainage system ►Standard USB Short
for error free operations even in Keyboard Cable for VH10
heavy condensing environments style keyboard (A9183902)
KYBD-QW-VC-01 QWERTY Keyboard ►Industrial keyboard controller with
temperature compensation ►Gamber-Johnson Keyboard
►Meets shock/vibrations standards: Tray (7160-0799) or Low
EN60721-5M3, MIL810F, and Profile Bracket (7160-0984)
Zebra internal testing standards.
►Keyboard elastomer and cable are
both field replaceable.
►NOTE: Standard USB Keyboard
cable used by ET5X is not capable of
powering the keyboard's built-in heater.
►Based on the VH10 keyboard design
►12 direct Function keys with an
additional 12 via shift function.
►Dimmable backlit keys.
►IP66, -30 to +50 C, condensing - for
use in Freezer Applications
►Build-in heaters and drainage system ►Standard USB Short
for error free operations even in Keyboard Cable for VH10
heavy condensing environments style keyboard (A9183902)
KYBD-AZ-VC-01 AZERTY Keyboard ►Industrial keyboard controller with
temperature compensation ►Gamber-Johnson Keyboard
►Meets shock/vibrations standards: Tray (7160-0799) or Low
EN60721-5M3, MIL810F, and Profile Bracket (7160-0984)
Zebra internal testing standards
►Keyboard elastomer and cable are
both field replaceable.
►NOTE: Standard USB Keyboard
cable used by ET5X is not capable of
powering the keyboard's built-in heater.
►Used with VH10 Style Keyboards
►Has standard USB-A connector
which can be used on Gamber-
A9183902
Johnson Fork Lift Cradle or other
(3rd party) *
devices with standard USB-A ports.
Standard USB Short
►Short Cable length (18 cm / approx.
(Order from Sinbon - Keyboard Cable for VH10
7 in)
[email protected] style keyboard
►Typically used when keyboard is
m or by calling Tim Kehoe
mounted directly near the ET5X (i.e. on
directly at (516) 658 1975)
Keyboard Tray).
►NOTE: Cable is not capable of
powering the keyboard's built-in heater.

Replacement QWERTY ►Wear Item Replacement for KYBD-QW-

KYBD-QW-SP-01 Keypad for VH10 style VC-01 (includes Elastomer with hard
keyboard caps)

Replacement AZERTY ►Wear Item Replacement for KYBD-AZ-

KYBD-AZ-SP-01 Keypad for VH10 style VC-01 (includes Elastomer with hard
keyboard caps)

1616314 (English) Gamber-Johnson Keyboard

1616315 (French) ►Connects to USB port on device Tray (7160-0799) or Low
►Discontinued 12/2018 - ►86 keys, includes F1-F10 (F11-F12 Profile Bracket (7160-0984).
see PMB 10054 shifted) NOTE: Holes in Keyboard
Small Keyboard ►Includes mouse joystick Tray will not align with
1616316 (German)
►IP65 sealing mounting bolts on keyboard.
►Discontinued 12/2015 -
►Cable length is 60 cm (~23") Tray or bracket will need
PMB 2723
►Keys are NOT backlit additional holes drilled to line
up with keyboard bolts.

EMC Product Line - ET5X TAG Page 25 of 27

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/4/19
 ►101 Backlit keys
►Connects to USB port on device
►10-Key Numeric Pad
►12 Function Keys
►Built-In Mounting holes Gamber-Johnson Keyboard
SLK-101-M-USB-3F iKey Keyboard, 101 key ►Windows Function Keys Tray (7160-0799) or Low
►NOTE: This is a custom product. Profile Bracket (7160-0984)
Please work with your Zebra
representative to open a Custom
Product Request (CPR) if you would
like to order this item.
►Connects to USB port on device
►12 function keys, 86 key functionality
►Meets NEMA 4X specifications
ensuring that keyboard is sealed Gamber-Johnson Keyboard
9010376 iKey Keyboard, English against the elements or unwanted Tray (7160-0799) or Low
spills and can be totally washed down. Profile Bracket (7160-0984)
►Backlit keys
►Includes integrated HulaPoint II™
mouse

►Connects to USB port on device

Gamber-Johnson Keyboard
►8 function keys, 72 key functionality
9010377 iKey Color Keyboard, English Tray (7160-0799) or Low
►Backlit keys
Profile Bracket (7160-0984)

3rd party * Additional Keyboard options Gamber-Johnson Keyboard

Tray (7160-0799) or Low
http://www.gamberjohnson.com/products/iKey Profile Bracket (7160-0984)

Batteries
Part Number Picture Description Notes Required Items
►This is the main battery that is internal
to the ET51/ET56.
►Provides x-x hrs continuous WLAN
Replacement Internal Battery usage with display on OR x-x hrs
BTRY-ET5X-8IN3-01 for 8" ET51/ET56 tablet continuous WAN usage with display
(3220 mAh - 25.75Wh) on.
►Not compatible with ET50/ET50
tablets.

►This is the main battery that is internal

to the ET51/ET56.
►Provides x-x hrs continuous WLAN
Replacement Internal Battery usage with display on OR x-x hrs
BTRY-ET5X-10IN3-01 for ET51/ET56 10" tablet continuous WAN usage with display
(4830 mAh - 38.6 Wh) on.
►Not compatible with ET50/ET55
tablets.
►This is the main battery that is internal
to the ET50/ET55.
►Provides 5-6 hrs continuous WLAN
Replacement Internal Battery usage with display on OR 4-5 hrs
BTRY-ET5X-8IN1-01 for 8" ET50/ET55 tablet continuous WAN usage with display
(5900 mAh - 22.4Wh) on.
►Not compatible with ET51/ET56
tablets.

►This is the main battery that is internal

to the ET50/ET55.
►Provides 8-9 hrs continuous WLAN
Replacement Internal Battery usage with display on OR 7-8 hrs
BTRY-ET5X-10IN1-01 for ET50/ET55 10" tablet continuous WAN usage with display
(8700 mAh - 33Wh ) on.
►Not compatible with ET51/ET56
tablets.

EMC Product Line - ET5X TAG Page 26 of 27

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/4/19
 ►Designed for use with optional
Expansion Back
►Hot swappable enables 24x7 usage
►This battery rapid charges the ET5X's
internal main battery.
Powerpack Battery for ►Has 5 LED indicators for charge
BTRY-ET5X-PRPK1-01 Expansion Back attachment
Expansion Back (6800 mAh) status
►Micro-USB port allows battery to be
charged while not attached to ET5X -
recommend using PWR-
WUA5V12W0xx USB charger for faster
charging.

KT-ET5X-8BTDR2-01
(for 8" tablet)
Replacement Main/Internal
►Not compatible with ET50/ET55 tablets.
KT-ET5X-10BTDR2-01 Battery Door for ET51/ET56
(for 10" tablet)

KT-ET5X-8BTDR1-01
(for 8" tablet)
Replacement Main/Internal
►Not compatible with ET51/ET56 tablets.
KT-ET5X-10BTDR1-01 Battery Door for ET50/ET55
(for 10" tablet)

EMC Product Line - ET5X TAG Page 27 of 27

NOTE: Items highlighted in grey may not be orderable/available Changes?/Updates? - notify [email protected] Document Update date: 3/4/19