Scribd Logo
Upload

Welcome to Scribd!

  • 42 views

    Bending Stress 04

    Uploaded by

    Danielle Ruthie Galit
    Bending stress occurs due to bending moments in beams. The flexure formula relates bending stress to the bending moment. It is derived assuming the beam axis bends but does not stretch, plane sections remain plane and perpendicular to the deformed axis, and cross-sectional changes are negligible. Examples show calculating maximum tensile and compressive bending stresses in different beam cross-sections under given loads. Practice problems apply the flexure formula to additional beam design scenarios.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Bending Stress 04

    Uploaded by

    Danielle Ruthie Galit
    42 views18 pages
    Bending stress occurs due to bending moments in beams. The flexure formula relates bending stress to the bending moment. It is derived assuming the beam axis bends but does not stretch, plane sections remain plane and perpendicular to the deformed axis, and cross-sectional changes are negligible. Examples show calculating maximum tensile and compressive bending stresses in different beam cross-sections under given loads. Practice problems apply the flexure formula to additional beam design scenarios.

    Original Title

    BENDING STRESS 04

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Bending stress occurs due to bending moments in beams. The flexure formula relates bending stress to the bending moment. It is derived assuming the beam axis bends but does not stretch, plane sections remain plane and perpendicular to the deformed axis, and cross-sectional changes are negligible. Examples show calculating maximum tensile and compressive bending stresses in different beam cross-sections under given loads. Practice problems apply the flexure formula to additional beam design scenarios.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    42 views18 pages

    Bending Stress 04

    Uploaded by

    Danielle Ruthie Galit
    Bending stress occurs due to bending moments in beams. The flexure formula relates bending stress to the bending moment. It is derived assuming the beam axis bends but does not stretch, plane sections remain plane and perpendicular to the deformed axis, and cross-sectional changes are negligible. Examples show calculating maximum tensile and compressive bending stresses in different beam cross-sections under given loads. Practice problems apply the flexure formula to additional beam design scenarios.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 18

    BENDING STRESS

    ENGR. DANIELLE RUTHIE I. GALIT


    BENDING STRESS

     The stresses caused by the bending moment are known as bending


    stresses, or flexure stresses. The relationship between these stresses
    and the bending moment is called the flexure formula.
     Stresses caused by bending moment in beam.
    In deriving the flexure formula, we make the following
    assumptions:

    1. The beam has an axial plane of symmetry, which we take to be


    the xyplane
    2. The applied loads (such as F1, F2, and F3) lie in the plane of
    symmetry and are perpendicular to the axis of the beam (the x-
    axis).
    3. The axis of the beam bends but does not stretch (the axis lies
    somewhere in the plane of symmetry; I
    4. Plane sections of the beam remain plane (do not warp) and
    perpendicular to the deformed axis of the beam
    5. Changes in the cross-sectional dimensions of the beam are
    negligible
    COMPATIBILITY
    EQUILIBRIUM
    FLEXURAL FORMULA
    Section moduli of simple cross-sectional shapes
    EXAMPLE 1
     The simply supported beam in Fig. (a) has a rectangular cross section 120 mm wide and
    200 mm high. Compute the maximum bending stress in the beam. Compute the bending
    stress at a point on section B that is 25 mm below the top of the beam.
    EXAMPLE 2
     The simply supported beam has the T-shaped cross section shown. Determine
    the values and locations of the maximum tensile and compressive bending
    stresses.
    EXAMPLE 3
    Determine the maximum bending stress in the steel beam with the circular cross
    section.
    PRACTICE PROBLEMS

    1. A beam constructed from 2-in. by 8-in. boards has the cross section shown in
    the figure. If the maximum bending moment acting in the beam is M = 16 000 lb -
    ft, determine the maximum bending stress in (a) board A; and (b) board B.
    2. Find the maximum bending stress in the rectangular wooden beam.

    3. The simply supported beam of rectangular cross section carries a distributed


    load of intensity W =3 kN/m and a concentrated force P. Determine the largest
    allowable value of P if the bending stress is not to exceed 10 MPa
     The cantilever beam is composed of two segments with rectangular cross
    sections. The width of each section is 2 in., but the depths are different, as
    shown in the figure. Determine the maximum bending stress in the beam.
    5. Determine the minimum allowable height h of the beam shown in the figure if
    the bending stress is not to exceed 20 MPa.
    6. The simply supported beam of circular cross section carries a uniformly
    distributed load of intensity w over two-thirds of its length. What is the
    maximum allowable value of w if the working stress in bending is 50 MPa?

    You might also like