DBMS LAB # 3
SQL Constraints
Engr. Shahid Ali Bhutta
UNIVERSITY OF ENGINEERING & TECHNOLOGY TAXILA
Lab Objective:
Understand the different commands and constrains used in SQL.
SQL Constraints
Constraints are used to limit the type of data that can go into a table.
Constraints can be specified when a table is created (with the CREATE TABLE statement) or
after the table is created (with the ALTER TABLE statement).
We will focus on the following constraints:
• NOT NULL
• UNIQUE
• PRIMARY KEY
• FOREIGN KEY
• CHECK
• DEFAULT
The next chapters will describe each constraint in details
SQL NOT NULL Constraint
By default, a table column can hold NULL values.
The NOT NULL constraint enforces a column to NOT accept NULL values.
The NOT NULL constraint enforces a field to always contain a value. This means that you
cannot insert a new record, or update a record without adding a value to this field.
The following SQL enforces the "P_Id" column and the "LastName" column to not accept
NULL values:
CREATE TABLE Persons
(
P_Id int NOT NULL,
LastName varchar(255) NOT NULL,
FirstName varchar(255),
Address varchar(255),
City varchar(255)
)
SQL UNIQUE Constraint
The UNIQUE constraint uniquely identifies each record in a database table.
The UNIQUE and PRIMARY KEY constraints both provide a guarantee for uniqueness for a
column or set of columns.
A PRIMARY KEY constraint automatically has a UNIQUE constraint defined on it.
Note that you can have many UNIQUE constraints per table, but only one PRIMARY KEY
constraint per table.
SQL UNIQUE Constraint on CREATE TABLE
The following SQL creates a UNIQUE constraint on the "P_Id" column when the "Persons"
table is created:
SQL Server / Oracle / MS Access:
CREATE TABLE Persons
(
P_Id int NOT NULL UNIQUE,
LastName varchar(255) NOT NULL,
FirstName varchar(255),
Address varchar(255),
City varchar(255)
)
MySQL:
CREATE TABLE Persons
(
P_Id int NOT NULL,
LastName varchar(255) NOT NULL,
FirstName varchar(255),
Address varchar(255),
City varchar(255),
UNIQUE (P_Id)
)
To allow naming of a UNIQUE constraint, and for defining a UNIQUE constraint on multiple
columns, use the following SQL syntax:
MySQL / SQL Server / Oracle / MS Access:
CREATE TABLE Persons
(
P_Id int NOT NULL,
LastName varchar(255) NOT NULL,
FirstName varchar(255),
Address varchar(255),
City varchar(255),
CONSTRAINT uc_PersonID UNIQUE (P_Id, LastName)
)
SQL UNIQUE Constraint on ALTER TABLE
To create a UNIQUE constraint on the "P_Id" column when the table is already created, use
the following SQL:
MySQL / SQL Server / Oracle / MS Access:
ALTER TABLE Persons
ADD UNIQUE (P_Id)
To allow naming of a UNIQUE constraint, and for defining a UNIQUE constraint on
multiple columns, use the following SQL syntax:
MySQL / SQL Server / Oracle / MS Access:
ALTER TABLE Persons
ADD CONSTRAINT uc_PersonID UNIQUE (P_Id,LastName)
SQL PRIMARY KEY Constraint
The PRIMARY KEY constraint uniquely identifies each record in a database table.
Primary keys must contain unique values.
A primary key column cannot contain NULL values.
Each table should have a primary key, and each table can have only one primary key.
SQL PRIMARY KEY Constraint on CREATE TABLE
The following SQL creates a PRIMARY KEY on the "P_Id" column when the "Persons"
table is created:
SQL Server / Oracle / MS Access:
CREATE TABLE Persons
(
P_Id int NOT NULL PRIMARY KEY,
LastName varchar(255) NOT NULL,
FirstName varchar(255),
Address varchar(255),
City varchar(255)
)
MySQL:
CREATE TABLE Persons
(
P_Id int NOT NULL,
LastName varchar(255) NOT NULL,
FirstName varchar(255),
Address varchar(255),
City varchar(255),
PRIMARY KEY (P_Id)
)
SQL FOREIGN KEY Constraint
A FOREIGN KEY in one table points to a PRIMARY KEY in another table.
Let's illustrate the foreign key with an example. Look at the following two tables:
The "Persons" table:
P_Id LastName FirstName Address City
1 Hansen Ola Timoteivn 10 Sandnes
2 Svendson Tove Borgvn 23 Sandnes
3 Pettersen Kari Storgt 20 Stavanger
The "Orders" table:
O_Id OrderNo P_Id
1 77895 3
2 44678 3
3 22456 2
4 24562 1
Note that the "P_Id" column in the "Orders" table points to the "P_Id" column in the
"Persons" table.The "P_Id" column in the "Persons" table is the PRIMARY KEY in the
"Persons" table.
The "P_Id" column in the "Orders" table is a FOREIGN KEY in the "Orders" table.
The FOREIGN KEY constraint is used to prevent actions that would destroy link between
tables.
The FOREIGN KEY constraint also prevents that invalid data is inserted into the foreign key
column, because it has to be one of the values contained in the table it points to.
SQL FOREIGN KEY Constraint on CREATE TABLE
The following SQL creates a FOREIGN KEY on the "P_Id" column when the "Orders" table
is created:
SQL Server / Oracle / MS Access:
CREATE TABLE Orders
(
O_Id int NOT NULL PRIMARY KEY,
OrderNo int NOT NULL,
P_Id int FOREIGN KEY REFERENCES Persons(P_Id)
)
MySQL:
CREATE TABLE Orders
(
O_Id int NOT NULL,
OrderNo int NOT NULL,
P_Id int,
PRIMARY KEY (O_Id),
FOREIGN KEY (P_Id) REFERENCES Persons(P_Id)
)
To allow naming of a FOREIGN KEY constraint, and for defining a FOREIGN KEY
constraint on multiple columns, use the following SQL syntax:
MySQL / SQL Server / Oracle / MS Access:
CREATE TABLE Orders
(
O_Id int NOT NULL,
OrderNo int NOT NULL,
P_Id int,
PRIMARY KEY (O_Id),
CONSTRAINT fk_PerOrders FOREIGN KEY (P_Id)
REFERENCES Persons(P_Id)
)
SQL FOREIGN KEY Constraint on ALTER TABLE
To create a FOREIGN KEY constraint on the "P_Id" column when the "Orders" table is
already created, use the following SQL:
MySQL / SQL Server / Oracle / MS Access:
ALTER TABLE Orders
ADD FOREIGN KEY (P_Id)
REFERENCES Persons(P_Id)
To allow naming of a FOREIGN KEY constraint, and for defining a FOREIGN KEY
constraint on multiple columns, use the following SQL syntax:
MySQL / SQL Server / Oracle / MS Access:
ALTER TABLE Orders
ADD CONSTRAINT fk_PerOrders
FOREIGN KEY (P_Id) REFERENCES Persons(P_Id)
To DROP a FOREIGN KEY Constraint
To drop a FOREIGN KEY constraint, use the following SQL:
SQL Server / Oracle / MS Access:
ALTER TABLE Orders
DROP CONSTRAINT fk_PerOrders
MySQL:
ALTER TABLE Orders
DROP FOREIGN KEY fk_PerOrders
SQL CHECK Constraint
The CHECK constraint is used to limit the value range that can be placed in a column.
If you define a CHECK constraint on a single column it allows only certain values for this
column.
If you define a CHECK constraint on a table it can limit the values in certain columns based
on values in other columns in the row.
SQL CHECK Constraint on CREATE TABLE
The following SQL creates a CHECK constraint on the "P_Id" column when the "Persons"
table is created. The CHECK constraint specifies that the column "P_Id" must only include
integers greater than 0.
SQL Server / Oracle / MS Access:
CREATE TABLE Persons
(
P_Id int NOT NULL CHECK (P_Id>0),
LastName varchar(255) NOT NULL,
FirstName varchar(255),
Address varchar(255),
City varchar(255)
)
My SQL:
CREATE TABLE Persons
(
P_Id int NOT NULL,
LastName varchar(255) NOT NULL,
FirstName varchar(255),
Address varchar(255),
City varchar(255),
CHECK (P_Id>0)
)
To allow naming of a CHECK constraint, and for defining a CHECK constraint on multiple
columns, use the following SQL syntax:
MySQL / SQL Server / Oracle / MS Access:
CREATE TABLE Persons
(
P_Id int NOT NULL,
LastName varchar(255) NOT NULL,
FirstName varchar(255),
Address varchar(255),
City varchar(255),
CONSTRAINT chk_Person CHECK (P_Id>0 AND City='Sandnes')
)
SQL CHECK Constraint on ALTER TABLE
To create a CHECK constraint on the "P_Id" column when the table is already created, use
the following SQL:
MySQL / SQL Server / Oracle / MS Access:
ALTER TABLE Persons
ADD CHECK (P_Id>0)
To allow naming of a CHECK constraint, and for defining a CHECK constraint on multiple
columns, use the following SQL syntax:
MySQL / SQL Server / Oracle / MS Access:
ALTER TABLE Persons
ADD CONSTRAINT chk_Person CHECK (P_Id>0 AND City='Sandnes')
To DROP a CHECK Constraint
To drop a CHECK constraint, use the following SQL:
SQL Server / Oracle / MS Access:
ALTER TABLE Persons
DROP CONSTRAINT chk_Person
SQL DEFAULT Constraint
The DEFAULT constraint is used to insert a default value into a column.
The default value will be added to all new records, if no other value is specified.
SQL DEFAULT Constraint on CREATE TABLE
The following SQL creates a DEFAULT constraint on the "City" column when the "Persons"
table is created:
My SQL / SQL Server / Oracle / MS Access:
CREATE TABLE Persons
(
P_Id int NOT NULL,
LastName varchar(255) NOT NULL,
FirstName varchar(255),
Address varchar(255),
City varchar(255) DEFAULT 'Sandnes'
)
The DEFAULT constraint can also be used to insert system values, by using functions like
GETDATE():
CREATE TABLE Orders
(
O_Id int NOT NULL,
OrderNo int NOT NULL,
P_Id int,
OrderDate date DEFAULT GETDATE()
)
SQL DEFAULT Constraint on ALTER TABLE
To create a DEFAULT constraint on the "City" column when the table is already created, use
the following SQL:
SQL Server / Oracle / MS Access:
ALTER TABLE Persons
ADD DEFAULT 'SANDNES' FOR City
MySQL:
ALTER TABLE Persons
ALTER City SET DEFAULT 'SANDNES'
To DROP a DEFAULT Constraint
To drop a DEFAULT constraint, use the following SQL:
SQL Server / Oracle / MS Access:
ALTER TABLE Persons
ALTER COLUMN City DROP DEFAULT
MySQL:
ALTER TABLE Persons
ALTER City DROP DEFAULT
