0% found this document useful (0 votes)
84 views

PC-60B USB Programmer

The PC-60B interface cable connects JA-6X series control panels to a computer via a USB port to allow programming and remote access. Drivers installed from the included CD allow communication between the control panel and computer software to program, operate, test and monitor the alarm system. The interface cable can be extended up to 5 meters for the USB connection or 100 meters for the control panel connection using twisted cable.

Uploaded by

Franczia Richard
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
84 views

PC-60B USB Programmer

The PC-60B interface cable connects JA-6X series control panels to a computer via a USB port to allow programming and remote access. Drivers installed from the included CD allow communication between the control panel and computer software to program, operate, test and monitor the alarm system. The interface cable can be extended up to 5 meters for the USB connection or 100 meters for the control panel connection using twisted cable.

Uploaded by

Franczia Richard
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

The PC-60B - USB computer interface The PC-60B - USB computer interface

Jablotron JA-6X series control panels can be 4. Search for the drivers on the removable Jablotron JA-6X series control panels can be 4. Search for the drivers on the removable
connected to a computer via the PC-60B media (CD). connected to a computer via the PC-60B media (CD).
interface cable. Connect the digital line bus 5. When installing for WIN XP, ignore the interface cable. Connect the digital line bus 5. When installing for WIN XP, ignore the
connector to the RJ-4 connector in the control notification about the wrong authenticity connector to the RJ-4 connector in the control notification about the wrong authenticity
panel. Then connect the USB connector to with the WIN XP and continue in the panel. Then connect the USB connector to with the WIN XP and continue in the
any free USB port on the computer. The installation process. any free USB port on the computer. The installation process.
provided drivers must be installed in to the 6. Leave other parameters without any provided drivers must be installed in to the 6. Leave other parameters without any
computer to use the PC-60B. Once installed modification. computer to use the PC-60B. Once installed modification.
you can start using ComLink software – 7. Finish the new hardware installation you can start using ComLink software – 7. Finish the new hardware installation
using this software the user/installer can wizard. using this software the user/installer can wizard.
easily program, operate, test the system, 8. The PC-60B contains two devices in one, easily program, operate, test the system, 8. The PC-60B contains two devices in one,
read the 127 latest events and much more. If therefore please wait for the “New read the 127 latest events and much more. If therefore please wait for the “New
the control panel includes a JA-65X hardware wizard” to start again. the control panel includes a JA-65X hardware wizard” to start again.
communicator, it is possible to have remote 9. Repeat the procedure according to steps 4 communicator, it is possible to have remote 9. Repeat the procedure according to steps 4
access to the system via the PC-60B and a to 7. access to the system via the PC-60B and a to 7.
JA-60U modem. 10. Your PC has two new devices after JA-60U modem. 10. Your PC has two new devices after
successful installation - "Jablotron serial successful installation - "Jablotron serial
Specification interface" as a serial port (COM) driver Specification interface" as a serial port (COM) driver
and the USB device with the same name and the USB device with the same name
Connectors (PC, control panel):USB and RJ-4 as the driver for the USB. Connectors (PC, control panel):USB and RJ-4 as the driver for the USB.
External power supply: Not required 11. If you have not installed the ComLink External power supply: Not required 11. If you have not installed the ComLink
Length of the USB cable: 2m software yet, or if you have ComLink 59 or Length of the USB cable: 2m software yet, or if you have ComLink 59 or
Length of cable connected to the control older, install ComLink 60 (or higher), which Length of cable connected to the control older, install ComLink 60 (or higher), which
panel: 1m is on the CD (the latest version of ComLink panel: 1m is on the CD (the latest version of ComLink
(cables can be extended, see Note) can be found on www.jablotron.com, in the (cables can be extended, see Note) can be found on www.jablotron.com, in the
Compatibility: ComLink version 60 or higher download section). Compatibility: ComLink version 60 or higher download section).
(DY61960 or higher) (DY61960 or higher)
Supported operating systems: Win 98 SE, Note Supported operating systems: Win 98 SE, Note
Win2000, Win XP professional or home Win2000, Win XP professional or home
edition Possible extension of the cables: edition Possible extension of the cables:

Complies with the essential requirements USB using a standard USB cable the length Complies with the essential requirements USB using a standard USB cable the length
of: 89/336/EC EMC Directive - Protection can be extended to up to 5 meters. of: 89/336/EC EMC Directive - Protection can be extended to up to 5 meters.
concerning electromagnetic compatibility RJ connector – the CT-04 cable can be used concerning electromagnetic compatibility RJ connector – the CT-04 cable can be used
when is used for its intended purpose. for a cable length of up to 10 m. Using twisted when is used for its intended purpose. for a cable length of up to 10 m. Using twisted
Original of the conformity assessment can be cable the maximum length can be up to 100 Original of the conformity assessment can be cable the maximum length can be up to 100
found at the web page meters. The two pins in the middle of the RJ found at the web page meters. The two pins in the middle of the RJ
www.jablotron.com, section Tech- connector (data) should be connected to one www.jablotron.com, section Tech- connector (data) should be connected to one
nical support. pair on the twisted cable. The other pair of the nical support. pair on the twisted cable. The other pair of the
twisted cable should be connected to the outer twisted cable should be connected to the outer
pins of the RJ connector (power supply). pins of the RJ connector (power supply).
Drivers installation Drivers installation
Although this product does not Although this product does not
Drivers and the ComLink software can be contain any harmful materials we Drivers and the ComLink software can be contain any harmful materials we
found on the enclosed CD-ROM. The latest suggest you to return the product to found on the enclosed CD-ROM. The latest suggest you to return the product to
version can also be found on website the dealer or directly to the producer version can also be found on website the dealer or directly to the producer
www.jablotron.com in the download section. after usage. www.jablotron.com in the download section. after usage.

1. Insert the CD into your CD drive. 1. Insert the CD into your CD drive.
2. Connect the PC-60B cable to the control 2. Connect the PC-60B cable to the control
Jablotron Ltd., Pod Skalkou 33 Jablotron Ltd., Pod Skalkou 33
panel and to the free USB socket on your 466 01 Jablonec nad Nisou panel and to the free USB socket on your 466 01 Jablonec nad Nisou
PC. Czech Republic PC. Czech Republic
3. Wait for the start up of the “New hardware Tel.: +420 483 559 911 3. Wait for the start up of the “New hardware Tel.: +420 483 559 911
wizard”. fax: +420 483 559 993 wizard”. fax: +420 483 559 993
Internet: www.jablotron.cz Internet: www.jablotron.cz
The PC-60B - USB computer interface 2 MHY51001 The PC-60B - USB computer interface 2 MHY51001

You might also like