0% found this document useful (0 votes)

37 views263 pages

Combine PDF

Uploaded by

Ca Ca

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

37 views263 pages

Combine PDF

Uploaded by

Ca Ca

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 263

Module 1: Networking Today

Instructor Materials

Introduction to Networks v7.0

(ITN)
Instructor Materials – Module 1 Planning Guide
This PowerPoint deck is divided in two parts:

• Instructor Planning Guide

• Information to help you become familiar with the module
• Teaching aids
• Instructor Class Presentation
• Optional slides that you can use in the classroom
• Begins on slide # 12
Note: Remove the Planning Guide from this presentation before sharing with anyone.
For additional help and resources go to the Instructor Home Page and Course
Resources for this course. You also can visit the professional development site on
netacad.com, the official Cisco Networking Academy Facebook page, or Instructor Only
FB group.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 2
What to Expect in this Module
To facilitate learning, the following features within the GUI may be included in this module:
Feature Description

Animations Expose learners to new skills and concepts.

Expose learners to new skills and concepts.
Videos
Check Your Per topic online quiz to help learners gauge content understanding.
Understanding(CYU)

Interactive Activities A variety of formats to help learners gauge content understanding.

Small simulations that expose learners to Cisco command line to practice
Syntax Checker configuration skills.
Simulation and modeling activities designed to explore, acquire, reinforce, and
PT Activity expand skills.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 3
What to Expect in this Module (Cont.)
To facilitate learning, the following features may be included in this module:

Feature Description
Hands-On Labs Labs designed for working with physical equipment.
Class Activities These are found on the Instructor Resources page. Class Activities are
designed to facilitate learning, class discussion, and collaboration.
Self-assessments that integrate concepts and skills learned throughout the
Module Quizzes series of topics presented in the module.
Module Summary Briefly recaps module content.

• Check Your Understanding activities are designed to let students quickly determine if they
understand the content and can proceed, or if they need to review.
• Check Your Understanding activities do not affect student grades.

• There are no separate slides for these activities in the PPT. They are listed in the notes area of the
slide that appears before these activities.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 5
Module 1: Activities
What activities are associated with this module?
Page # Activity Type Activity Name Optional?
1.1.2 Video The Cisco Networking Academy Learning Experience Recommended
1.2.6 Check Your Understanding Network Components Recommended
1.3.3 Check Your Understanding Network Representations and Topologies Recommended
1.4.5 Check Your Understanding Common Types of Networks Recommended
1.5.5 Video Download and Install Packet Tracer Recommended
1.5.6 Video Getting Started in Cisco Packet Tracer Recommended
1.5.7 Packet Tracer Network Representation Recommended
1.6.6 Check Your Understanding Reliable Networks Recommended
1.7.5 Video Cisco WebEx for Huddles Recommended
1.7.10 Check Your Understanding Network Trends Recommended
1.8.3 Check Your Understanding Network Security Recommended
1.9.3 Lab Research IT and Networking Job Opportunities Recommended

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 6
Module 1: Best Practices
Prior to teaching Module 1, the instructor should:
• Review the activities and assessments for this module.
• Try to include as many questions as possible to keep students engaged during classroom
presentation.

Topic 1.1
• Ask the class:
• What wouldn’t we have without the internet?
• What will be possible in the future using the network as the platform?

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 7
Module 1: Best Practices (Cont.)
Topic 1.2
• Ask the students what they think of when someone uses the term “host”. What is a “host”?
• Discuss the difference between a server client network verses a peer-to-peer (P2P)
network. Ask the students what kind of issues we can have with a P2P.
• In a P2P a user may share information with someone who really should not have this right.
Remember this is a decentralized model that administers cannot exercise much control.
• Also when a person who is the server is not available (gone to lunch, on vacation, etc.)
their resources will not be available to the client. It is important that this is best used on
extremely small networks.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 8
Module 1: Best Practices (Cont.)
Topic 1.3
• Create a Packet Tracer demonstration and refer to it throughout the module when
referencing concepts introduced in the module (routers, switches, interface, ports, network
media connections)
• Demonstrate a basic topology and some of the key icons
• Reinforce the differences between the physical and logical topologies
• Analogies can be good too, when thinking about a street map, a map that shows the
physical topology would show where the streets are; whereas a logical map might show
which directions the traffic flows on the streets, such as one-way streets or streets in both
directions, etc. It is important to know both the physical and the logical, just as it is
important to know not only where the streets are, but also which way traffic is allowed to
flow on them.
Topic 1.4
• Ask the students what kinds of equipment have on their home networks. Consider that all
of these items are on the largest networks. The difference is in ability, quantity, and cost of
a companies equipment.
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 9
Module 1: Best Practices (Cont.)
Topic 1.5
• Ask the class how they connect to the internet at home.
• Does anyone ever remember connecting via dialup modem?
• Ask the class if any uses a VoIP phone service bundled from their ISP. This would be an
example of home converged network.
Topic 1.6
• QoS is the ability to give an advantage to certain kinds of traffic.
• Ask the class when we like to give advantage to something or someone, but to everyone.
If they cannot think of anything, ask if we have an emergency would we want the
ambulance, firetruck, etc. to be treated like any other piece of traffic on the highway?
• Briefly discuss examples of how Confidentiality, Integrity, and Availability are implemented.
• Confidentiality – Encryption
• Integrity – checksums or hashing
• Availability – ensured with redundant hardware, connections, backups, disaster recovery
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 10
Module 1: Best Practices (Cont.)
Topic 1.7
• Have students discuss what devices they BYOD to and where.
• Ask students if they use Cloud Computing and what for.
• 1.7.6 – Do some research ahead of time to help describe what a Custom Cloud is
• 1.7.7 – Ask the students to discuss if anyone is currently making use of smart home technology
• What are various other possibilities besides what is mentioned in the curriculum?
Topic1.8
• Ask the class what kind of internal threats that they might see as a network administrator.
• Ask why internal attacks are as important to address as the obvious external attacks.
Topic 1.9
• Discuss the benefits of obtaining a CCNA certification.
• Have students research current networking job openings that require a CCNA or other Cisco
certification.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 11
Module 1: Networking Today
Introduction to Networks v7.0
(ITN)
Module Objectives
Module Title: Networking Today

Module Objective: Explain the advances in modern technologies.

Topic Title Topic Objective

Networks Affect our Lives Explain how networks affect our daily lives.
Network Components Explain how host and network devices are used.
Network Representations and Topologies Explain network representations and how they are used in network topologies.
Common Types of Networks Compare the characteristics of common types of networks.
Internet Connections Explain how LANs and WANs interconnect to the internet.
Reliable Networks Describe the four basic requirements of a reliable network.

Network Trends Explain how trends such as BYOD, online collaboration, video, and cloud computing
are changing the way we interact.
Network Security Identify some basic security threats and solution for all networks.

The IT Professional Explain employment opportunities in the networking field.

Communication is almost as important to us as our reliance on air, water, food, and

shelter. In today’s world, through the use of networks, we are connected like never
before.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 15
Networking Today
Video – The Cisco Networking Academy Learning Experience
Cisco Networking Academy: learn how we use technology to make the world a better place.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 16
Networking Today
No Boundaries
• World without boundaries

• Global communities

• Human network

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 18
Network Components
Host Roles
Every computer on a network is
called a host or end device.
Servers are computers that provide
information to end devices:
• email servers
• web servers Server Description
Type
• file server
Email Email server runs email server software.
Clients are computers that send Clients use client software to access email.
requests to the servers to retrieve
Web Web server runs web server software.
information: Clients use browser software to access web pages.
• web page from a web server
• email from an email server File File server stores corporate and user files.
The client devices access these files.
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 19
Network Components
Peer-to-Peer
It is possible to have a device be a client and a server in a Peer-to-Peer Network. This type of
network design is only recommended for very small networks.

Advantages Disadvantages
Easy to set up No centralized administration
Less complex Not as secure
Lower cost Not scalable

Used for simple tasks: transferring files and sharing Slower performance
printers
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 20
Network Components
End Devices
An end device is where a message originates from or where it is received. Data originates with an
end device, flows through the network, and arrives at an end device.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 21
Network Components
Intermediary Network Devices
An intermediary device interconnects end devices. Examples include switches, wireless
access points, routers, and firewalls.
Management of data as it flows through a network is also the role of an intermediary
device, including:
• Regenerate and retransmit data signals.
• Maintain information about what pathways exist in the network.
• Notify other devices of errors and communication failures.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 22
Network Components
Network Media
Communication across a network is carried through a medium which allows a message to
travel from source to destination.

Media Types Description

Metal wires within cables Uses electrical impulses

Glass or plastic fibers Uses pulses of light.

within cables (fiber-optic
cable)

Wireless transmission Uses modulation of

specific frequencies of
electromagnetic waves.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 23
1.3 Network Representations and
Topologies

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 24
Network Representations and Topologies
Network Representations

Network diagrams, often called topology

diagrams, use symbols to represent
devices within the network.
Important terms to know include:
• Network Interface Card (NIC)
• Physical Port
• Interface

Note: Often, the terms port and

interface are used interchangeably

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 25
Network Representations and Topologies
Topology Diagrams
Physical topology diagrams illustrate the Logical topology diagrams illustrate devices,
physical location of intermediary devices ports, and the addressing scheme of the
and cable installation. network.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 27
Common Types of Networks
Networks of Many Sizes
• Small Home Networks – connect a few
computers to each other and the Internet
• Small Office/Home Office – enables
computer within a home or remote office
to connect to a corporate network
Small Home SOHO • Medium to Large Networks – many
locations with hundreds or thousands of
interconnected computers
• World Wide Networks – connects
hundreds of millions of computers world-
wide – such as the internet

Medium/Large World Wide

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 28
Common Types of Networks
LANs and WANs
Network infrastructures vary greatly in
terms of:
• Size of the area covered
• Number of users connected
• Number and types of services
available
• Area of responsibility

Two most common types of networks:

• Local Area Network (LAN)
• Wide Area Network (WAN).

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 29
Common Types of Networks
LANs and WANs (cont.)
A LAN is a network infrastructure that spans A WAN is a network infrastructure that spans
a small geographical area. a wide geographical area.

LAN WAN
Interconnect end devices in a limited area. Interconnect LANs over wide geographical areas.
Administered by a single organization or Typically administered by one or more service
individual. providers.
Provide high-speed bandwidth to internal Typically provide slower speed links between LANs.
devices.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 30
Common Types of Networks
The Internet
The internet is a worldwide collection of
interconnected LANs and WANs.
• LANs are connected to each other using
WANs.
• WANs may use copper wires, fiber optic
cables, and wireless transmissions.
The internet is not owned by any individual
or group. The following groups were
developed to help maintain structure on
the internet:
• IETF
• ICANN
• IAB
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 31
Common Types of Networks
Intranets and Extranets

An intranet is a private collection of LANs

and WANs internal to an organization that
is meant to be accessible only to the
organizations members or others with
authorization.
An organization might use an extranet to
provide secure access to their network for
individuals who work for a different
organization that need access to their
data on their network.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 33
Internet Connections
Internet Access Technologies There are many ways to connect users
and organizations to the internet:
• Popular services for home users
and small offices include
broadband cable, broadband digital
subscriber line (DSL), wireless
WANs, and mobile services.
• Organizations need faster
connections to support IP phones,
video conferencing and data center
storage.
• Business-class interconnections
are usually provided by service
providers (SP) and may include:
business DSL, leased lines, and
Metro Ethernet.
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 34
Internet Connections
Home and Small Office Internet Connections
Connection Description

Cable high bandwidth, always on, internet

offered by cable television service
providers.

DSL high bandwidth, always on, internet

connection that runs over a
telephone line.
Cellular uses a cell phone network to connect
to the internet.

Satellite major benefit to rural areas without

Internet Service Providers.
Dial-up an inexpensive, low bandwidth
telephone option using a modem.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 35
Internet Connections
Businesses Internet Connections
Corporate business connections may Type of Description
require: Connection
Dedicated These are reserved circuits within
• higher bandwidth Leased Line the service provider’s network that
• dedicated connections connect distant offices with private
voice and/or data networking.
• managed services
Ethernet This extends LAN access technology
WAN into the WAN.

DSL Business DSL is available in various

formats including Symmetric Digital
Subscriber Lines (SDSL).

Satellite This can provide a connection when

a wired solution is not available.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 36
Internet Connections
The Converging Network

Before converged networks, an

organization would have been
separately cabled for telephone, video,
and data. Each of these networks
would use different technologies to
carry the signal.
Each of these technologies would use a
different set of rules and standards.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 37
Internet Connections
The Converging Network (Cont.)
Converged data networks carry
multiple services on one link including:
• data
• voice
• video
Converged networks can deliver data,
voice, and video over the same
network infrastructure. The network
infrastructure uses the same set of
rules and standards.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 38
Internet Connections
Video – Download and Install Packet Tracer
This video will demonstrate the download and install process of Packet Tracer.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 39
Internet Connections
Video – Getting Started in Cisco Packet Tracer
This video will cover the following:
• Navigate the Packet Tracer interface
• Customize the Packet Tracer Interface

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 40
Internet Connections
Packet Tracer – Network Representation
In this Packet tracer you will do the following:
• The network model in this activity incorporates many of the technologies that you will
master in your CCNA studies.

Note: It is not important that you understand everything you see and do in this activity.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 42
Reliable Network
Network Architecture
Network Architecture refers to the
technologies that support the infrastructure
that moves data across the network.
There are four basic characteristics that the
underlying architectures need to address to
meet user expectations:
• Fault Tolerance
• Scalability
• Quality of Service (QoS)
• Security

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 43
Reliable Network
Fault Tolerance
A fault tolerant network limits the impact of
a failure by limiting the number of affected
devices. Multiple paths are required for
fault tolerance.
Reliable networks provide redundancy by
implementing a packet switched network:
• Packet switching splits traffic into
packets that are routed over a network.
• Each packet could theoretically take a
different path to the destination.
This is not possible with circuit-switched
networks which establish dedicated
circuits.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 45
Reliable Network
Quality of Service
Voice and live video transmissions
require higher expectations for those
services being delivered.

Have you ever watched a live video with

constant breaks and pauses? This is
caused when there is a higher demand
for bandwidth than available – and QoS
isn’t configured.
• Quality of Service (QoS) is the primary
mechanism used to ensure reliable
delivery of content for all users.
• With a QoS policy in place, the router
can more easily manage the flow of
data and voice traffic.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 46
Reliable Network There are two main types of network
Network Security security that must be addressed:
• Network infrastructure security
• Physical security of network devices
• Preventing unauthorized access to
the devices
• Information Security
• Protection of the information or data
transmitted over the network
Three goals of network security:
• Confidentiality – only intended
recipients can read the data
• Integrity – assurance that the data has
not be altered with during transmission
• Availability – assurance of timely and
reliable access to data for authorized
users
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 47
1.7 Network Trends

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 48
Network Trends
Recent Trends
The role of the network must adjust
and continually transform in order to
be able to keep up with new
technologies and end user devices as
they constantly come to the market.

Several new networking trends that

effect organizations and consumers:
• Bring Your Own Device (BYOD)
• Online collaboration
• Video communications
• Cloud computing

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 49
Network Trends
Bring Your Own Device (BYOD)
Bring Your Own Device allows users to use their own devices
giving them more opportunities and
greater flexibility.

BYOD allows end users to have the

freedom to use personal tools to
access information and communicate
using their:
• Laptops
• Netbooks
• Tablets
• Smartphones
• E-readers
BYOD means any device, with any
ownership, used anywhere.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 50
Network Trends
Online Collaboration
 Collaborate and work with others
over the network on joint projects.

 Collaboration tools including Cisco

WebEx (shown in the figure) gives
users a way to instantly connect and
interact.

 Collaboration is a very high priority

for businesses and in education.

 Cisco Webex Teams is a

multifunctional collaboration tool.
• send instant messages
• post images
• post videos and links

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 51
Network Trends
Video Communication
• Video calls are made to anyone, regardless of where they are located.

• Video conferencing is a powerful tool for communicating with others.

• Video is becoming a critical requirement for effective collaboration.

• Cisco TelePresence powers is one way of working where everyone,

everywhere.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 52
Network Trends
Video – Cisco WebEx for Huddles

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 53
Network Trends
Cloud Computing
Cloud computing allows us to store personal files or backup our data on servers over the internet.
• Applications can also be accessed using the Cloud.
• Allows businesses to deliver to any device anywhere in the world.

Cloud computing is made possible by data centers.

• Smaller companies that can’t afford their own data centers, lease server and storage services from larger
data center organizations in the Cloud.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 54
Network Trends
Cloud Computing (Cont.)
Four types of Clouds:
• Public Clouds
• Available to the general public through a pay-per-use model or for free.
• Private Clouds
• Intended for a specific organization or entity such as the government.
• Hybrid Clouds
• Made up of two or more Cloud types – for example, part custom and part public.
• Each part remains a distinctive object but both are connected using the same architecture.
• Custom Clouds
• Built to meet the needs of a specific industry, such as healthcare or media.
• Can be private or public.
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 55
Network Trends
Technology Trends in the Home
• Smart home technology is a
growing trend that allows
technology to be integrated into
every-day appliances which
allows them to interconnect with
other devices.
• Ovens might know what time to
cook a meal for you by
communicating with your calendar
on what time you are scheduled
to be home.
• Smart home technology is
currently being developed for all
rooms within a house.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 56
Network Trends • Powerline networking can
Powerline Networking allow devices to connect to a
LAN where data network
cables or wireless
communications are not a
viable option.
• Using a standard powerline
adapter, devices can connect
to the LAN wherever there is
an electrical outlet by
sending data on certain
frequencies.
• Powerline networking is
especially useful when
wireless access points
cannot reach all the devices
in the home.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 57
Network Trends
Wireless Broadband
In addition to DSL and cable, wireless is
another option used to connect homes
and small businesses to the internet.
• More commonly found in rural
environments, a Wireless Internet Service
Provider (WISP) is an ISP that connects
subscribers to designated access points or
hotspots.
• Wireless broadband is another solution for
the home and small businesses.
• Uses the same cellular technology used by a
smart phone.
• An antenna is installed outside the house
providing wireless or wired connectivity for
devices in the home.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 59
Network Security
Security Threats • Network security is an integral
part of networking regardless of
the size of the network.
• The network security that is
implemented must take into
account the environment while
securing the data, but still
allowing for quality of service that
is expected of the network.
• Securing a network involves
many protocols, technologies,
devices, tools, and techniques in
order to secure data and mitigate
threats.
• Threat vectors might be external
or internal.
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 60
Network Security
External Threats:
Security Threats (Cont.)
• Viruses, worms, and Trojan
horses
• Spyware and adware
• Zero-day attacks
• Threat Actor attacks
• Denial of service attacks
• Data interception and theft
• Identity theft

Internal Threats:
• lost or stolen devices
• accidental misuse by employees
• malicious employees
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 61
Network Security
Security Solutions
Security must be implemented in multiple
layers using more than one security solution.
Network security components for home or
small office network:
• Antivirus and antispyware software
should be installed on end devices.
• Firewall filtering used to block
unauthorized access to the network.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 62
Network Security
Security Solutions (Cont.)

Larger networks have additional security

requirements:
• Dedicated firewall system
• Access control lists (ACL)
• Intrusion prevention systems (IPS)
• Virtual private networks (VPN)
The study of network security starts with a clear
understanding of the underlying switching and
routing infrastructure.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 64
The IT Professional
The Cisco Certified Network Associate
CCNA (CCNA) certification:
• demonstrates that you have a knowledge of
foundational technologies
• ensures you stay relevant with skills needed
for the adoption of next-generation
technologies.
The new CCNA focus:
• IP foundation and security topics
• Wireless, virtualization, automation, and
network programmability.
New DevNet certifications at the
associate, specialist and professional
levels, to validate your software
development skills.
Specialist certification validate your skills
in line with your job role and interests.

At www.netacad.com you can click the

Careers menu and then select Employment
opportunities.
• Find employment opportunities by
using the Talent Bridge Matching
Engine.
• Search for jobs with Cisco, Cisco
partners and distributors seeking
Cisco Networking Academy students
and alumni.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 66
The IT Professional
Lab – Researching IT and Networking Job Opportunities

In this lab, you will complete the following objectives:

• Research Job Opportunities
• Reflect on Research

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 68
Module Practice and Quiz
What did I learn in this module?
• Through the use of networks, we are connected like never before.
• All computers that are connected to a network and participate directly in network
communication are classified as hosts.
• Diagrams of networks often use symbols to represent the different devices and
connections that make up a network.
• A diagram provides an easy way to understand how devices connect in a large network.
• The two types of network infrastructures are Local Area Networks (LANs), and Wide Area
Networks (WANs).
• SOHO internet connections include cable, DSL, Cellular, Satellite, and Dial-up telephone.
• Business internet connections include Dedicated Leased Line, Metro Ethernet, Business
DSL, and Satellite.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 69
Module Practice and Quiz
What did I learn in this module? (Cont.)
• Network architecture refers to the technologies that support the infrastructure and the
programmed services and rules, or protocols, that move data across the network.
• There are four basic characteristics of network architecture: Fault Tolerance, Scalability,
Quality of Service (QoS), and Security.
• Recent networking trends that affect organizations and consumers: Bring Your Own Device
(BYOD), online collaboration, video communications, and cloud computing.
• There are several common external and internal threats to networks.
• Larger networks and corporate networks use antivirus, antispyware, and firewall filtering, but
they also have other security requirements: Dedicated firewall systems, Access control lists
(ACL), Intrusion prevention systems (IPS), and Virtual private networks (VPN)
• The Cisco Certified Network Associate (CCNA) certification demonstrates your knowledge of
foundational technologies.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 70
Module 1
New Terms and Commands
• Peer-to-Peer File Sharing • Logical topology diagram • Network bandwidth
• Small Office/Home Office or • Local Area Network (LAN) • Bring Your Own Device (BYOD)
SOHO • Wide Area Network (WAN) • Collaboration
• Medium to large network • Internet • Cloud computing
• Server • Intranet • Private clouds
• Client • Extranet • Hybrid clouds
• Peer-to-Peer network • Internet Service Provider (ISP) • Public clouds
• End device • Converged networks • Custom clouds
• Intermediary device • Network architecture • Data center
• Medium • Fault tolerant network • Smart home technology
• Network Interface Card (NIC) • Packet-switched network • Powerline networking
• Physical Port • Circuit-switched network • Wireless Internet Service
• Interface • Scalable network Provider (WISP)
• Physical topology diagram • Quality of Service (Qos) • Network architecture

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 71
Module 2: Basic Switch and
End Device Configuration
Introductions to Networks v7.0
(ITN)
Module Objectives
Module Title: Basic Switch and End Device Configuration

Module Objective: Implement initial settings including passwords, IP addressing, and default gateway
parameters on a network switch and end devices.

Topic Title Topic Objective

Explain how to access a Cisco IOS device for configuration
Cisco IOS Access
purposes.
Explain how to navigate Cisco IOS to configure network
IOS Navigation
devices.

The Command Structure Describe the command structure of Cisco IOS software.

Basic Device Configuration Configure a Cisco IOS device using CLI.

Save Configurations Use IOS commands to save the running configuration.

Ports and Addresses Explain how devices communicate across network media.

Configure IP Addressing Configure a host device with an IP address.

Verify Connectivity Verify connectivity between two end devices.
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 14
2.1 Cisco IOS Access

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 15
Cisco IOS Access
Operating Systems
• Shell - The user interface that allows
users to request specific tasks from
the computer. These requests can be
made either through the CLI or GUI
interfaces.
• Kernel - Communicates between the
hardware and software of a computer
and manages how hardware
resources are used to meet software
requirements.
• Hardware - The physical part of a
computer including underlying
electronics.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 16
Cisco IOS Access
GUI
• A GUI allows the user to interact with the
system using an environment of
graphical icons, menus, and windows.

• A GUI is more user-friendly and requires

less knowledge of the underlying
command structure that controls the
system.
• Examples of these are: Windows,
macOS, Linux KDE, Apple iOS and
Android.

• GUIs can fail, crash, or simply not

operate as specified. For these reasons,
network devices are typically accessed
through a CLI.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 17
Cisco IOS Access
Purpose of an OS
PC operating system enables a user to do CLI-based network operating system enables a
the following: network technician to do the following:
• Use a mouse to make selections • Use a keyboard to run CLI-based
and run programs network programs
• Enter text and text-based • Use a keyboard to enter text and
commands text-based commands
• View output on a monitor
• View output on a monitor

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 18
Cisco IOS Access
Access Methods
• Console – A physical management port
used to access a device in order to
provide maintenance, such as
performing the initial configurations.
• Secure Shell (SSH) – Establishes a
secure remote CLI connection to a
device, through a virtual interface, over a
network. (Note: This is the recommended
method for remotely connecting to a
device.)

• Telnet – Establishes an insecure remote

CLI connection to a device over the
network. (Note: User authentication,
passwords and commands are sent over the
network in plaintext.)
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 19
Cisco IOS Access
Terminal Emulation Programs
• Terminal emulation programs are used to connect to a network device by either a console
port or by an SSH/Telnet connection.
• There are several terminal emulation programs to chose from such as PuTTY, Tera Term
and SecureCRT.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 21
IOS Navigation
Primary Command Modes
User EXEC Mode:
• Allows access to only a limited
number of basic monitoring
commands
• Identified by the CLI prompt
that ends with the > symbol

Privileged EXEC Mode:

• Allows access to all
commands and features
• Identified by the CLI prompt
that ends with the # symbol

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 22
IOS Navigation
Configuration Mode and Subconfiguration Modes

Global Configuration Mode:

• Used to access
configuration options on the
device

Line Configuration Mode:

• Used to configure console,
SSH, Telnet or AUX access

Interface Configuration Mode:

• Used to configure a switch
port or router interface
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 23
IOS Navigation
Video – IOS CLI Primary Command Modes

This video will cover the following:

• User EXEC mode
• Privilege EXEC mode
• Global Config mode

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 24
IOS Navigation
Navigation Between IOS Modes
 Privileged EXEC Mode:
• To move from user EXEC mode to privilege
EXEC mode, use the enabled command.
 Global Configuration Mode:
• To move in and out of global configuration
mode, use the configure terminal
command. To return to privilege EXEC
mode, use the exit command.
 Line Configuration Mode:
• To move in and out of line configuration
mode, use the line command followed by
the management line type. To return to
global configuration mode, use the exit
command.
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 25
IOS Navigation
Navigation Between IOS Modes (Cont.)
Subconfiguration Modes:
• To move out of any subconfiguration mode to
get back to global configuration mode, use
the exit command. To return to privilege
EXEC mode, use the end command or key
combination Ctrl +Z.

• To move directly from one subconfiguration

mode to another, type in the desired
subconfiguration mode command. In the
example, the command prompt changes from
(config-line)# to (config-if)#.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 26
IOS Navigation
Video – Navigation Between IOS Modes

This video will cover the following:

• enable
• disable
• configure terminal
• exit
• end
• Control + Z on keyboard
• Other commands to enter sub configuration modes

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 28
The Command Structure
Basic IOS Command Structure

• Keyword – This is a specific parameter defined in the operating system (in the figure, ip
protocols).

• Argument - This is not predefined; it is a value or variable defined by the user (in the
figure, 192.168.10.5).

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 29
The Command Structure
IOS Command Syntax Check
A command might require one or more arguments. To determine the keywords
and arguments required for a command, refer to the command syntax.
• Boldface text indicates commands and keywords that are entered as shown.
• Italic text indicates an argument for which the user provides the value.

Convention Description
Boldface text indicates commands and keywords that you enter literally as
boldface
shown.
italics Italic text indicates arguments for which you supply values.

[x] Square brackets indicate an optional element (keyword or argument).

{x} Braces indicate a required element (keyword or argument).

Braces and vertical lines within square brackets indicate a required choice
[x {y | z }] within an optional element. Spaces are used to clearly delineate parts of the
command.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 30
The Command Structure
IOS Command Syntax Check (Cont.)
 The command syntax provides the pattern, or format, that must be used when
entering a command.

 The command is ping and the user-defined

argument is the ip-address of the
destination device. For example, ping
10.10.10.5.
 The command is traceroute and the
user-defined argument is the ip-
address of the destination device. For
example, traceroute 192.168.254.254.

 If a command is complex with multiple arguments, you may see it represented like this:

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 31
The Command Structure
IOS Help Features
The IOS has two forms of help available: context-sensitive help and command
syntax check.
• Context-sensitive help enables you to • Command syntax check verifies that
quickly find answers to these questions: a valid command was entered by
• Which commands are available in each command
the user.
mode? • If the interpreter cannot understand the
• Which commands start with specific characters or command being entered, it will provide
group of characters? feedback describing what is wrong with
the command.
• Which arguments and keywords are available to
particular commands?

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 32
The Command Structure
Video – Context Sensitive Help and Command Syntax Checker

This video will cover the following:

• Use the help command in user EXEC, privileged EXEC, and global config mode
• Finish commands and arguments with the help command
• Use the command syntax checker to fix syntax errors and incomplete commands

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 33
The Command Structure
Hot Keys and Shortcuts
• The IOS CLI provides hot keys and shortcuts that make configuring, monitoring, and
troubleshooting easier.
• Commands and keywords can be shortened to the minimum number of characters
that identify a unique selection. For example, the configure command can be
shortened to conf because configure is the only command that begins with conf.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 34
The Command Structure
Hot Keys and Shortcuts (Cont.)
 The table below is a brief list of keystrokes to enhance command line editing.

Keystroke Description

Tab Completes a partial command name entry.

Backspace Erases the character to the left of the cursor.

Left Arrow or Ctrl+B Moves the cursor one character to the left.

Right Arrow or Ctrl+F Moves the cursor one character to the right.

Recalls the commands in the history buffer, beginning with

Up Arrow or Ctrl+P
the most recent commands.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 35
The Command Structure
Hot Keys and Shortcuts (Cont.)
• When a command output produces more text
than can be displayed in a terminal window, • The table below lists commands that can
the IOS will display a “--More--” prompt. The be used to exit out of an operation.
table below describes the keystrokes that can
be used when this prompt is displayed.

Keystroke Description Keystroke Description

When in any configuration mode, ends the
Enter Key Displays the next line. Ctrl-C configuration mode and returns to privileged EXEC
mode.
When in any configuration mode, ends the
Space Bar Displays the next screen. Ctrl-Z configuration mode and returns to privileged EXEC
mode.
Ends the display string, returning to All-purpose break sequence used to abort DNS
Any other key Ctrl-Shift-6
privileged EXEC mode. lookups, traceroutes, pings, etc.

Note: To see more hot keys and shortcuts refer to 2.3.5.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 36
The Command Structure
Video – Hot Keys and Shortcuts

This video will cover the following:

• Tab key (tab completion)
• Command shortening
• Up and down arrow key
• CTRL + C
• CTRL + Z
• CTRL + Shift + 6
• CTRL + R

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 37
The Command Structure
Packet Tracer – Navigate the IOS

In this Packet Tracer, you will do the following:

• Establish Basic Connections, Access the CLI, and Explore Help

• Explore EXEC Modes

• Set the Clock

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 38
The Command Structure
Lab – Navigate the IOS by Using Tera Term for Console
Connectivity
In this lab, you complete the following objectives:

• Access a Cisco Switch through the Serial Console Port

• Display and Configure Basic Device Settings

• (Optional) Access a Cisco Router Using a Mini-USB Console Cable

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 40
Basic Device Configuration
Device Names
• The first configuration command on any device should be to
give it a unique hostname.
• By default, all devices are assigned a factory default name.
For example, a Cisco IOS switch is "Switch.”

• Guideline for naming devices:

• Start with a letter
• Contain no spaces
• End with a letter or digit
Note: To return the switch to the default
• Use only letters, digits, and dashes
prompt, use the no hostname global
• Be less than 64 characters in length config command.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 41
Basic Device Configuration
Password Guidelines
• The use of weak or easily guessed passwords are a security concern.
• All networking devices should limit administrative access by securing privileged EXEC,
user EXEC, and remote Telnet access with passwords. In addition, all passwords should
be encrypted and legal notifications provided.

• Password Guidelines:
• Use passwords that are more than eight
characters in length.
• Use a combination of upper and lowercase
letters, numbers, special characters, and/or
numeric sequences. Note: Most of the labs in this course use simple
passwords such as cisco or class. These passwords
• Avoid using the same password for all devices. are considered weak and easily guessable and should
• Do not use common words because they are be avoided in production environments.
easily guessed.
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 42
Basic Device Configuration
Configure Passwords
Securing user EXEC mode access:
• First enter line console configuration mode
using the line console 0 command in global
configuration mode.
• Next, specify the user EXEC mode password
using the password password command.
• Finally, enable user EXEC access using
the login command.

Securing privileged EXEC mode access:

• First enter global configuration mode.
• Next, use the enable secret password command.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 43
Basic Device Configuration
Configure Passwords (Cont.)
Securing VTY line access:
• First enter line VTY configuration mode
using the line vty 0 15 command in
global configuration mode.
• Next, specify the VTY password using
the password password command.
• Finally, enable VTY access using
the login command.

 Note: VTY lines enable remote access using Telnet or SSH to the device. Many Cisco
switches support up to 16 VTY lines that are numbered 0 to 15.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 44
Basic Device Configuration
Encrypt Passwords
 The startup-config and running-config files  Use the show running-config command
display most passwords in plaintext. to verify that the passwords on the device
are now encrypted.
 To encrypt all plaintext passwords, use
the service password-encryption global config
command.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 45
Basic Device Configuration
Banner Messages
 A banner message is important to warn
unauthorized personnel from attempting
to access the device.
 To create a banner message of the day
on a network device, use the banner The banner will be displayed on attempts to access the device.
motd # the message of the day # global
config command.

Note: The “#” in the command syntax is called

the delimiting character. It is entered before
and after the message.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 46
Basic Device Configuration
Video – Secure Administrative Access to a Switch

This video will cover the following:

• Access the command line to secure the switch
• Secure access to the console port
• Secure virtual terminal access for remote access
• Encrypt passwords on the switch
• Configure the banner message
• Verify security changes

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 48
Save Configurations
Configuration Files
 There are two system files that store the device configuration:
• startup-config - This is the saved configuration file that is stored in NVRAM. It contains all the commands that will be
used by the device upon startup or reboot. Flash does not lose its contents when the device is powered off.
• running-config - This is stored in Random Access Memory (RAM). It reflects the current configuration. Modifying a
running configuration affects the operation of a Cisco device immediately. RAM is volatile memory. It loses all of its
content when the device is powered off or restarted.
• To save changes made to the running configuration to the startup configuration file, use the copy running-config
startup-config privileged EXEC mode command.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 49
Save Configurations
Alter the Running Configurations
If changes made to the running config do not
have the desired effect and the running-config
has not yet been saved, you can restore the
device to its previous configuration. To do this
you can:
• Remove the changed commands individually.
• Reload the device using the reload command
in privilege EXEC mode. Note: This will cause
the device to briefly go offline, leading to
network downtime.
If the undesired changes were saved to the
startup-config, it may be necessary to clear all
the configurations using the erase startup-
config command in privilege EXEC mode.
• After erasing the startup-config, reload the
device to clear the running-config file from
RAM.
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 50
Save Configurations
Video – Alter the Running Configuration

This video will cover the following:

• Copy the running-config file to the startup-config file
• Show the files in the flash or NVRAM directory
• Use command shortening
• Erase the startup-config file
• Copy the start-config file to the running-config file

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 51
Save Configurations
Capture Configuration to a Text File
Configuration files can also be saved and
archived to a text document.
• Step 1. Open terminal emulation software,
such as PuTTY or Tera Term, that is already
connected to a switch.
• Step 2. Enable logging in to the terminal
software and assign a name and file location to
save the log file. The figure displays that All
session output will be captured to the file
specified (i.e., MySwitchLogs).

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 52
Save Configurations
Capture Configuration to a Text File (Cont.)
• Step 3. Execute the show running-
config or show startup-config command at
the privileged EXEC prompt. Text displayed in
the terminal window will be placed into the
chosen file.
• Step 4. Disable logging in the terminal
software. The figure shows how to disable
logging by choosing the None session logging
option

Note: The text file created can be used as a record of

how the device is currently implemented. The file could
require editing before being used to restore a saved
configuration to a device.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 53
Save Configurations
Packet Tracer – Configure Initial Switch Settings

In this Packet Tracer, you will do the following:

• Verify the Default Switch Configuration

• Configure a Basic Switch Configuration

• Configure a MOTD Banner

• Save Configuration Files to NVRAM

• Configure a second Switch

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 55
Ports and Addresses
IP Addresses
• The use of IP addresses is the primary means of
enabling devices to locate one another and
establish end-to-end communication on the
internet.
• The structure of an IPv4 address is called dotted
decimal notation and is represented by four
decimal numbers between 0 and 255.
• An IPv4 subnet mask is a 32-bit value that
differentiates the network portion of the address
from the host portion. Coupled with the IPv4
address, the subnet mask determines to which
subnet the device is a member.
• The default gateway address is the IP address of
the router that the host will use to access remote
networks, including the internet.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 56
Ports and Addresses
IP Addresses (Cont.)
• IPv6 addresses are 128 bits in length and
written as a string of hexadecimal values.
Every four bits is represented by a single
hexadecimal digit; for a total of 32
hexadecimal values. Groups of four
hexadecimal digits are separated by a colon
“:”.
• IPv6 addresses are not case-sensitive and
can be written in either lowercase or
uppercase.

Note: IP in this course refers to both the IPv4 and IPv6

protocols. IPv6 is the most recent version of IP and is
replacing the more common IPv4.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 57
Ports and Addresses
Interfaces and Ports
• Network communications depend on end
user device interfaces, networking device
interfaces, and the cables that connect
them.
• Types of network media include twisted-
pair copper cables, fiber-optic cables,
coaxial cables, or wireless.
• Different types of network media have
different features and benefits. Some of
the differences between various types of
media include:
• Distance the media can successfully carry a signal
• Environment in which the media is to be installed
• Amount of data and the speed at which it must be
transmitted
• Cost of the media and installation

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 59
Configure IP Addressing
Manual IP Address Configuration for End Devices
• End devices on the network need an IP address in
order to communicate with other devices on the
network.
• IPv4 address information can be entered into end
devices manually, or automatically using Dynamic
Host Configuration Protocol (DHCP).
• To manually configure an IPv4 address on a Windows
PC, open the Control Panel > Network Sharing
Center > Change adapter settings and choose the
adapter. Next right-click and select Properties to
display the Local Area Connection Properties.
• Next, click Properties to open the Internet Protocol
Version 4 (TCP/IPv4) Properties window. Then
configure the IPv4 address and subnet mask
information, and default gateway. Note: IPv6 addressing and configuration
options are similar to IPv4.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 60
Configure IP Addressing
Automatic IP Address Configuration for End Devices
• DHCP enables automatic IPv4 address
configuration for every end device that is
DHCP-enabled.
• End devices are typically by default
using DHCP for automatic IPv4 address
configuration.
• To configure DHCP on a Windows PC, open
the Control Panel > Network Sharing
Center > Change adapter settings and
choose the adapter. Next right-click and
select Properties to display the Local Area
Connection Properties.
• Next, click Properties to open the Internet
Protocol Version 4 (TCP/IPv4)
Properties window, then select Obtain an Note: IPv6 uses DHCPv6 and SLAAC (Stateless Address
IP address automatically and Obtain DNS Autoconfiguration) for dynamic address allocation.
server address automatically.
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 61
Configure IP Addressing
Switch Virtual Interface Configuration
To access the switch remotely, an IP address and a subnet mask must be configured on
the SVI.
To configure an SVI on a switch:
• Enter the interface vlan 1 command in global configuration mode.
• Next assign an IPv4 address using the ip address ip-address subnet-mask command.
• Finally, enable the virtual interface using the no shutdown command.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 62
Configure IP Addressing
Packet Tracer – Implement Basic Connectivity

In this Packet Tracer, you will do the following:

 Perform a Basic Configuration on two switches

 Configure the PCs

 Configure the Switch Management Interface

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 64
Verify Connectivity
Video – Test the Interface Assignment

This video will cover the following:

 Connect a console cable from the PC to the switch

 Use the terminal emulation program and accept the defaults to bring you to the command line

 Use enable to enter privileged EXEC mode

 Use the global configuration mode and the interface configuration mode to enter the no shutdown
command

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 65
Verify Connectivity
Video – Test End-to-End Connectivity

This video will cover the use of the ping command to test connectivity on both switches and both
PCs.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 67
Module Practice and Quiz
Packet Tracer – Basic Switch and End Device Configuration
In this Packet Tracer, you will do the following:

 Configure hostnames and IP addresses on two switches

 Use Cisco IOS commands to specify or limit access to the device configurations

 Use IOS commands to save the running configuration

 Configure two host devices with IP addresses

 Verify connectivity between the two PC end devices

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 68
Module Practice and Quiz
Lab – Basic Switch and End Device Configuration

In this lab, you complete the following objectives:

• Set Up the Network Topology

• Configure PC Hosts

• Configure and Verify Basic Switch Settings

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 69
Module Practice and Quiz
What did I learn in this module?
• All end devices and network devices require an operating system (OS).

• Cisco IOS software separates management access into the following

two command modes: User EXEC Mode and Privileged EXEC Mode.
• Global configuration mode is accessed before other specific
configuration modes. From global config mode, the user can enter
different subconfiguration modes.
• Each IOS command has a specific format or syntax and can only be
executed in the appropriate mode.
• Basic device configurations- hostname, password, encrypt passwords
and banner.
• There are two system files that store the device configuration: startup-
config and running-config.
• IP addresses enable devices to locate one another and establish end-
to-end communication on the internet. Each end device on a network
must be configured with an IP address.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 70
Module 2 : Basic Switch and End Device Configuration
New Terms and Commands
• operating system (OS) • line configuration mode • console
• CLI • interface configuration mode • enable secret
• GUI • Enable • VTY line
• shell • configure terminal • show running-config
• kernel • exit • banner motd
• hardware • end • startup-config
• console • argument • running-config
• Secure Shell (SSH) • keyword • reload
• Telnet • command syntax • erase startup-config
• terminal emulation • ping • DHCP
programs • traceroute • switch virtual interface (SVI)
• user EXEC mode • help command ”?” • ipconfig
• privileged EXEC mode • hot keys • show ip int brief
• hostname

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 71
Module 3: Protocols and
Models
Introduction to Networks 7.0
(ITN)
Module Objectives
Module Title: Protocols and Models
Module Objective: Explain how network protocols enable devices to access local and remote
network resources.
Topic Title Topic Objective
The Rules Describe the types of rules that are necessary to successfully communicate.

Protocols Explain why protocols are necessary in network communication.

Protocol Suites Explain the purpose of adhering to a protocol suite.

Standards Organizations Explain the role of standards organizations in establishing protocols for network
interoperability.

Reference Models Explain how the TCP/IP model and the OSI model are used to facilitate
standardization in the communication process.

Data Encapsulation Explain how data encapsulation allows data to be transported across the
network.
Data Access Explain how local hosts access local resources on a network.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 13
Class Activity – Design a Communications System
Design a Communications System
Objectives:
• Explain the role of protocols and standards organizations in facilitating
interoperability in network communications.

This video will explain the protocols that devices use to see their place in the
network and communicate with other devices.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 16
The Rules
Communications Fundamentals
Networks can vary in size and complexity. It is not enough to have a connection,
devices must agree on “how” to communicate.
There are three elements to any communication:
• There will be a source (sender).
• There will be a destination (receiver).
• There will be a channel (media) that provides for the path of communications to
occur.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 17
The Rules
Communications Protocols
• All communications are governed by protocols.

• Protocols are the rules that communications will follow.

• These rules will vary depending on the protocol.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 18
The Rules
Rule Establishment
• Individuals must use established rules or agreements to govern the conversation.

• The first message is difficult to read because it is not formatted properly. The second shows
the message properly formatted

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 19
The Rules
Rule Establishment (Cont.)
Protocols must account for the following requirements:
• An identified sender and receiver
• Common language and grammar
• Speed and timing of delivery
• Confirmation or acknowledgment requirements

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 20
The Rules
Network Protocol Requirements
Common computer protocols must be in agreement and include the following
requirements:
• Message encoding
• Message formatting and encapsulation
• Message size
• Message timing
• Message delivery options

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 21
The Rules
Message Encoding
• Encoding is the process of converting information into another acceptable form for
transmission.
• Decoding reverses this process to interpret the information.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 22
The Rules
Message Formatting and Encapsulation
• When a message is sent, it must use a specific format or structure.

• Message formats depend on the type of message and the channel that is used to
deliver the message.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 23
The Rules
Message Size
Encoding between hosts must be in an appropriate format for the medium.
• Messages sent across the network are converted to bits
• The bits are encoded into a pattern of light, sound, or electrical impulses.
• The destination host must decode the signals to interpret the message.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 24
The Rules
Message Timing
Message timing includes the following:
Flow Control – Manages the rate of data transmission and defines how much information
can be sent and the speed at which it can be delivered.
Response Timeout – Manages how long a device waits when it does not hear a reply from
the destination.
Access method - Determines when someone can send a message.
• There may be various rules governing issues like “collisions”. This is when more than one
device sends traffic at the same time and the messages become corrupt.
• Some protocols are proactive and attempt to prevent collisions; other protocols are
reactive and establish a recovery method after the collision occurs.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 25
The Rules
Message Delivery Options
Message delivery may one of the following methods:
• Unicast – one to one communication
• Multicast – one to many, typically not all
• Broadcast – one to all

Note: Broadcasts are used in IPv4 networks, but are not an option for IPv6. Later we will also
see “Anycast” as an additional delivery option for IPv6.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 26
The Rules
A Note About the Node Icon
• Documents may use the node icon , typically a circle, to represent all devices.

• The figure illustrates the use of the node icon for delivery options.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 28
Protocols
Network Protocol Overview
Network protocols define a
Protocol Type Description
common set of rules.
• Can be implemented on
devices in: Network enable two or more devices to communicate over
Communications one or more networks
• Software
• Hardware Network Security secure data to provide authentication, data
integrity, and data encryption
• Both
• Protocols have their own: Routing enable routers to exchange route information,
compare path information, and select best path
• Function
• Format Service used for the automatic detection of devices or
• Rules Discovery services

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 29
Protocols
Network Protocol Functions
• Devices use agreed-upon protocols
to communicate .
• Protocols may have may have one
or functions.

Function Description
Addressing Identifies sender and receiver
Reliability Provides guaranteed delivery
Flow Control Ensures data flows at an efficient rate
Sequencing Uniquely labels each transmitted segment of data
Error Detection Determines if data became corrupted during transmission
Application Interface Process-to-process communications between network applications
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 30
Protocols
Protocol Interaction
• Networks require the use of several
protocols.
• Each protocol has its own function and format.

Protocol Function
Hypertext Transfer  Governs the way a web server and a web client interact
Protocol (HTTP)  Defines content and format
Transmission Control  Manages the individual conversations
Protocol (TCP)  Provides guaranteed delivery
 Manages flow control
Internet Protocol (IP) Delivers messages globally from the sender to the receiver
Ethernet Delivers messages from one NIC to another NIC on the same Ethernet Local
Area Network (LAN)
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 31
3.3 Protocol Suites

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 32
Protocol Suites
Network Protocol Suites
Protocols must be able to work with other
protocols.
Protocol suite:
• A group of inter-related protocols
necessary to perform a communication
function
• Sets of rules that work together to help
solve a problem
The protocols are viewed in terms of layers:
• Higher Layers
• Lower Layers- concerned with moving
data and provide services to upper
layers
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 33
Protocol Suites
Evolution of Protocol Suites
There are several protocol suites.
• Internet Protocol Suite or TCP/IP- The
most common protocol suite and maintained
by the Internet Engineering Task Force
(IETF)

• Open Systems Interconnection (OSI)

protocols- Developed by the International
Organization for Standardization (ISO) and
the International Telecommunications Union
(ITU)

• AppleTalk- Proprietary suite release by

Apple Inc.

• Novell NetWare- Proprietary suite

developed by Novell Inc.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 34
Protocol Suites
TCP/IP Protocol Example
• TCP/IP protocols operate at the
application, transport, and
internet layers.
• The most common network
access layer LAN protocols are
Ethernet and WLAN (wireless
LAN).

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 35
Protocol Suites
TCP/IP Protocol Suite
• TCP/IP is the protocol suite used by
the internet and includes many
protocols.

• TCP/IP is:

• An open standard protocol suite

that is freely available to the public
and can be used by any vendor
• A standards-based protocol suite
that is endorsed by the networking
industry and approved by a
standards organization to ensure
interoperability

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 36
Protocol Suites
TCP/IP Communication Process
• A web server encapsulating and sending a • A client de-encapsulating the web page for
web page to a client. the web browser

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 38
Standards Organizations
Open Standards
Open standards encourage:
• interoperability

• competition

• innovation

Standards organizations are:

• vendor-neutral

• non-profit organizations

• established to develop and promote the

concept of open standards.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 39
Standards Organizations
• Internet Society (ISOC) - Promotes
Internet Standards the open development and evolution of
internet
• Internet Architecture Board (IAB) -
Responsible for management and
development of internet standards
• Internet Engineering Task Force
(IETF) - Develops, updates, and
maintains internet and TCP/IP
technologies
• Internet Research Task Force
(IRTF) - Focused on long-term
research related to internet and
TCP/IP protocols
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 40
Standards Organizations
Internet Standards (Cont.)
Standards organizations involved with the
development and support of TCP/IP
• Internet Corporation for Assigned
Names and Numbers (ICANN) -
Coordinates IP address allocation, the
management of domain names, and
assignment of other information
• Internet Assigned Numbers Authority
(IANA) - Oversees and manages IP
address allocation, domain name
management, and protocol identifiers
for ICANN

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 41
Standards Organizations
Electronic and Communications Standards
• Institute of Electrical and Electronics Engineers (IEEE, pronounced “I-triple-E”)
- dedicated to creating standards in power and energy, healthcare,
telecommunications, and networking
• Electronic Industries Alliance (EIA) - develops standards relating to electrical
wiring, connectors, and the 19-inch racks used to mount networking equipment
• Telecommunications Industry Association (TIA) - develops communication
standards in radio equipment, cellular towers, Voice over IP (VoIP) devices,
satellite communications, and more
• International Telecommunications Union-Telecommunication
Standardization Sector (ITU-T) - defines standards for video compression,
Internet Protocol Television (IPTV), and broadband communications, such as a
digital subscriber line (DSL)
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 42
Standards Organizations
Lab – Researching Networking Standards
In this lab, you will do the following:
• Part 1: Research Networking Standards Organizations
• Part 2: Reflect on Internet and Computer Networking Experience

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 44
Reference Models
The Benefits of Using a Layered Model
Complex concepts such as how a
network operates can be difficult to
explain and understand. For this
reason, a layered model is used.
Two layered models describe network
operations:
• Open System Interconnection (OSI)
Reference Model
• TCP/IP Reference Model

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 45
Reference Models
The Benefits of Using a Layered Model (Cont.)
These are the benefits of using a layered model:
• Assist in protocol design because protocols that operate at a specific layer have
defined information that they act upon and a defined interface to the layers above
and below
• Foster competition because products from different vendors can work together

• Prevent technology or capability changes in one layer from affecting other layers
above and below
• Provide a common language to describe networking functions and capabilities

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 46
Reference Models
The OSI Reference Model
OSI Model Layer Description
7 - Application Contains protocols used for process-to-process communications.
Provides for common representation of the data transferred between application
6 - Presentation
layer services.

5 - Session Provides services to the presentation layer and to manage data exchange.

Defines services to segment, transfer, and reassemble the data for individual
4 - Transport
communications.

3 - Network Provides services to exchange the individual pieces of data over the network.

2 - Data Link Describes methods for exchanging data frames over a common media.

1 - Physical Describes the means to activate, maintain, and de-activate physical connections.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 47
Reference Models
The TCP/IP Reference Model
TCP/IP Model
Description
Layer
Application Represents data to the user, plus encoding and dialog control.

Transport Supports communication between various devices across diverse networks.

Internet Determines the best path through the network.

Network Access Controls the hardware devices and media that make up the network.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 48
Reference Models
OSI and TCP/IP Model Comparison

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 49
Reference Models
Packet Tracer – Investigate the TCP/IP and OSI Models in Action
This simulation activity is intended to provide a foundation for understanding the
TCP/IP protocol suite and the relationship to the OSI model. Simulation mode
allows you to view the data contents being sent across the network at each layer.
In this Packet Tracer, you will:
• Part 1: Examine HTTP Web Traffic
• Part 2: Display Elements of the TCP/IP Protocol Suite

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 51
Data Encapsulation
Segmenting Messages Segmenting is the process of breaking up
messages into smaller units. Multiplexing is
the processes of taking multiple streams of
segmented data and interleaving them
together.
Segmenting messages has two primary
benefits:
• Increases speed - Large amounts of
data can be sent over the network
without tying up a communications link.
• Increases efficiency - Only segments
which fail to reach the destination need to
be retransmitted, not the entire data
stream.

Sequencing messages is the process of

numbering the segments so that the
message may be reassembled at the
destination.
TCP is responsible for sequencing the
individual segments.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 53
Data Encapsulation
Encapsulation is the process where protocols
Protocol Data Units add their information to the data.
• At each stage of the process, a PDU has a
different name to reflect its new functions.
• There is no universal naming convention for
PDUs, in this course, the PDUs are named
according to the protocols of the TCP/IP
suite.
• PDUs passing down the stack are as
follows:
1. Data (Data Stream)
2. Segment
3. Packet
4. Frame
5. Bits (Bit Stream)
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 54
Data Encapsulation
Encapsulation Example
• Encapsulation is a top down
process.
• The level above does its
process and then passes it
down to the next level of the
model. This process is
repeated by each layer until
it is sent out as a bit stream.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 55
Data Encapsulation
De-encapsulation Example
• Data is de-encapsulated as it moves up
the stack.
• When a layer completes its process,
that layer strips off its header and
passes it up to the next level to be
processed. This is repeated at each
layer until it is a data stream that the
application can process.
1. Received as Bits (Bit Stream)
2. Frame
3. Packet
4. Segment
5. Data (Data Stream)
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 56
3.7 Data Access

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 57
Data Access
Addresses
Both the data link and network layers use addressing to deliver data from source to
destination.
Network layer source and destination addresses - Responsible for delivering the IP
packet from original source to the final destination.
Data link layer source and destination addresses – Responsible for delivering the data
link frame from one network interface card (NIC) to another NIC on the same network.

The IP packet contains two IP

addresses:
• Source IP address - The IP
address of the sending device,
original source of the packet.
• Destination IP address - The IP
address of the receiving device,
final destination of the packet.
These addresses may be on the same
link or remote.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 59
Data Access
Layer 3 Logical Address (Cont.)
An IP address contains two parts:
• Network portion (IPv4) or Prefix (IPv6)
• The left-most part of the address indicates
the network group which the IP address is
a member.
• Each LAN or WAN will have the same
network portion.
• Host portion (IPv4) or Interface ID
(IPv6)
• The remaining part of the address identifies
a specific device within the group.
• This portion is unique for each device on
the network.
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 60
Data Access
Devices on the Same Network

When devices are on the same

network the source and destination will
have the same number in network
portion of the address.
• PC1 – 192.168.1.110
• FTP Server – 192.168.1.9

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 61
Data Access
Role of the Data Link Layer Addresses: Same IP Network
When devices are on the same Ethernet
network the data link frame will use the
actual MAC address of the destination
NIC.
MAC addresses are physically embedded
into the Ethernet NIC and are local
addressing.
• The Source MAC address will be that of
the originator on the link.
• The Destination MAC address will
always be on the same link as the
source, even if the ultimate destination
is remote.
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 62
Data Access
Devices on a Remote Network
• What happens when the actual
(ultimate) destination is not on the
same LAN and is remote?
• What happens when PC1 tries to
reach the Web Server?
• Does this impact the network and data
link layers?

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 63
Data Access
Role of the Network Layer Addresses
When the source and destination have
a different network portion, this means
they are on different networks.
• PC1 – 192.168.1
• Web Server – 172.16.1

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 64
Data Access
Role of the Data Link Layer Addresses: Different IP Networks
When the final destination is remote, Layer
3 will provide Layer 2 with the local default
gateway IP address, also known as the
router address.

• The default gateway (DGW) is the router

interface IP address that is part of this
LAN and will be the “door” or “gateway” to
all other remote locations.
• All devices on the LAN must be told about
this address or their traffic will be confined
to the LAN only.

• Once Layer 2 on PC1 forwards to the

default gateway (Router), the router then
can start the routing process of getting the
information to actual destination.
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 65
Data Access
Role of the Data Link Layer Addresses: Different IP Networks
(Cont.)
• The data link addressing is local
addressing so it will have a source and
destination for each link.
• The MAC addressing for the first
segment is :
• Source – AA-AA-AA-AA-AA-AA
(PC1) Sends the frame.
• Destination – 11-11-11-11-11-11 (R1-
Default Gateway MAC) Receives
the frame.
Note: While the L2 local addressing will
change from link to link or hop to hop, the
L3 addressing remains the same.
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 66
Data Access
Data Link Addresses
• Since data link addressing is local addressing, it will have a source and destination for
each segment or hop of the journey to the destination.
• The MAC addressing for the first segment is:
• Source – (PC1 NIC) sends frame
• Destination – (First Router- DGW interface) receives frame

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 67
Data Access
Data Link Addresses (Cont.)
The MAC addressing for the second hop is:
• Source – (First Router- exit interface) sends frame
• Destination – (Second Router) receives frame

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 68
Data Access
Data Link Addresses (Cont.)
The MAC addressing for the last segment is:
• Source – (Second Router- exit interface) sends frame
• Destination – (Web Server NIC) receives frame

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 69
Data Access
Data Link Addresses (Cont.)
• Notice that the packet is not modified, but the frame is changed, therefore the L3 IP
addressing does not change from segment to segment like the L2 MAC addressing.
• The L3 addressing remains the same since it is global and the ultimate destination is still
the Web Server.

In this lab you will do the following:

• Download and Install Wireshark

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 71
Data Access
Lab – Use Wireshark to View Network Traffic
In this lab, you will do the following:
• Part 1: Capture and Analyze Local ICMP Data in Wireshark
• Part 2: Capture and Analyze Remote ICMP Data in Wireshark

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 73
Module Practice and Quiz
What did I learn in this module?
The Rules
• Protocols must have a sender and a receiver.
• Common computer protocols include these requirements: message encoding, formatting
and encapsulation, size, timing, and delivery options.
Protocols
• To send a message across the network requires the use of several protocols.
• Each network protocol has its own function, format, and rules for communications.
Protocol Suites
• A protocol suite is a group of inter-related protocols.
• TCP/IP protocol suite are the protocols used today.
Standards Organizations
• Open standards encourage interoperability, competition, and innovation.
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 74
Module Practice and Quiz
What did I learn in this module? (Cont.)
Reference Models
• The two models used in networking are the TCP/IP and the OSI model.
• The TCP/IP model has 4 layers and the OSI model has 7 layers.
Data Encapsulation
• The form that a piece of data takes at any layer is called a protocol data unit (PDU).
• There are five different PDUs used in the data encapsulation process: data, segment, packet,
frame, and bits
Data Access
• The Network and Data Link layers are going to provide addressing to move data through the
network.
• Layer 3 will provide IP addressing and layer 2 will provide MAC addressing.
• The way these layers handle addressing will depend on whether the source and the destination
are on the same network or if the destination is on a different network from the source.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 75
New Terms and Commands
• encoding • 802.3 (Ethernet)
• protocol • 802.11 (wireless Ethernet)
• channel • segmentation
• flow control • default gateway
• response timeout • Hypertext Transfer Protocol (HTTP)
• acknowledgement • Simple Mail Transfer Protocol (SMTP)
• unicast • Post Office Protocol (POP)
• multicast • Transmission Control Protocol (TCP)
• broadcast • transport
• protocol suite • data link
• Ethernet • network access
• standard • Advanced Research Projects Agency
• proprietary protocol Network (ARPANET)
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 76
New Terms and Commands (Cont.)

• Internet Message Access Protocol (IMAP) • encapsulation

• File Transfer Protocol (FTP) • de-encapsulation
• Trivial File Transfer Protocol (TFTP) • protocol data unit (PDU)
• User Datagram Protocol (UDP) • segment
• Network Address Translation (NAT) • packet
• Internet Control Messaging Protocol • frame
(ICMP)
• Open Shortest Path First (OSPF)
• Enhanced Interior Gateway Routing
Protocol (EIGRP)
• Address Resolution Protocol (ARP)
• Dynamic Host Configuration (DHCP)

Module Objective: Explain how physical layer protocols, services, and network media support
communications across data networks.

Topic Title Topic Objective

Purpose of the Physical Layer Describe the purpose and functions of the physical
layer in the network.
Physical Layer Characteristics Describe characteristics of the physical layer.

Copper Cabling Identify the basic characteristics of copper cabling.

UTP Cabling Explain how UTP cable is used in Ethernet networks.

Fiber-Optic Cabling Describe fiber optic cabling and its main advantages
over other media.
Wireless Media Connect devices using wired and wireless media.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 12
Purpose of the Physical Layer
The Physical Connection
• Before any network communications can occur, a physical connection to a local
network must be established.
• This connection could be wired or wireless, depending on the setup of the network.
• This generally applies whether you are considering a corporate office or a home.
• A Network Interface Card (NIC) connects a device to the network.
• Some devices may have just one NIC, while others may have multiple NICs (Wired
and/or Wireless, for example).
• Not all physical connections offer the same level of performance.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 13
Purpose of the Physical Layer
The Physical Layer
• Transports bits across the
network media
• Accepts a complete frame from
the Data Link Layer and
encodes it as a series of
signals that are transmitted to
the local media
• This is the last step in the
encapsulation process.
• The next device in the path to
the destination receives the bits
and re-encapsulates the frame,
then decides what to do with it.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 16
Physical Layer Characteristics
Physical Components
Physical Layer Standards address three functional areas:
• Physical Components
• Encoding
• Signaling

The Physical Components are the hardware devices, media, and other
connectors that transmit the signals that represent the bits.
• Hardware components like NICs, interfaces and connectors, cable materials, and cable designs
are all specified in standards associated with the physical layer.

• Encoding converts the stream of

bits into a format recognizable by
the next device in the network
path.
• This ‘coding’ provides predictable
patterns that can be recognized by
the next device.
• Examples of encoding methods
include Manchester (shown in the
figure), 4B/5B, and 8B/10B.

• The signaling method is how the bit Light Pulses Over Fiber-Optic Cable
values, “1” and “0” are represented on
the physical medium.
• The method of signaling will vary based
on the type of medium being used.

Electrical Signals Over Copper Cable

Microwave Signals Over Wireless

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 19
Physical Layer Characteristics
Bandwidth
• Bandwidth is the capacity at which a medium can carry data.
• Digital bandwidth measures the amount of data that can flow from one place to
another in a given amount of time; how many bits can be transmitted in a second.
• Physical media properties, current technologies, and the laws of physics play a role
in determining available bandwidth.

Unit of Bandwidth Abbreviation Equivalence

Bits per second bps 1 bps = fundamental unit of bandwidth

Kilobits per second Kbps 1 Kbps = 1,000 bps = 103 bps

Megabits per second Mbps 1 Mbps = 1,000,000 bps = 106 bps

Gigabits per second Gbps 1 Gbps – 1,000,000,000 bps = 109 bps

Terabits per second Tbps 1 Tbps = 1,000,000,000,000 bps = 1012 bps

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 20
Physical Layer Characteristics
Bandwidth Terminology
Latency
• Amount of time, including delays, for data to travel from one given point to another
Throughput
• The measure of the transfer of bits across the media over a given period of time
Goodput
• The measure of usable data transferred over a given period of time
• Goodput = Throughput - traffic overhead

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 22
Copper Cabling
Characteristics of Copper Cabling
Copper cabling is the most common type of cabling used in networks today. It is
inexpensive, easy to install, and has low resistance to electrical current flow.
Limitations:
• Attenuation – the longer the electrical signals have to travel, the weaker they get.
• The electrical signal is susceptible to interference from two sources, which can distort and corrupt
the data signals (Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) and
Crosstalk).
Mitigation:
• Strict adherence to cable length limits will mitigate attenuation.
• Some kinds of copper cable mitigate EMI and RFI by using metallic shielding and grounding.
• Some kinds of copper cable mitigate crosstalk by twisting opposing circuit pair wires together.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 24
Copper Cabling
Unshielded Twisted Pair (UTP)
• UTP is the most common networking
media.
• Terminated with RJ-45 connectors
• Interconnects hosts with intermediary
network devices.

Key Characteristics of UTP

1. The outer jacket protects the copper
wires from physical damage.
2. Twisted pairs protect the signal from
interference.
3. Color-coded plastic insulation
electrically isolates the wires from
each other and identifies each pair.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 25
Copper Cabling
Shielded Twisted Pair (STP) • Better noise protection than UTP
• More expensive than UTP
• Harder to install than UTP
• Terminated with RJ-45 connectors
• Interconnects hosts with intermediary
network devices

Key Characteristics of STP

1. The outer jacket protects the copper
wires from physical damage
2. Braided or foil shield provides
EMI/RFI protection
3. Foil shield for each pair of wires
provides EMI/RFI protection
4. Color-coded plastic insulation
electrically isolates the wires from
each other and identifies each pair
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 26
Copper Cabling
Coaxial Cable
Consists of the following:
1. Outer cable jacket to prevent minor physical
damage
2. A woven copper braid, or metallic foil, acts as the
second wire in the circuit and as a shield for the
inner conductor.
3. A layer of flexible plastic insulation
4. A copper conductor is used to transmit the
electronic signals.

There are different types of connectors used with coax

cable.

Commonly used in the following situations:

• Wireless installations - attach antennas to wireless
devices
• Cable internet installations - customer premises
wiring
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 27
4.4 UTP Cabling

UTP has four pairs of color-coded copper wires

twisted together and encased in a flexible plastic
sheath. No shielding is used. UTP relies on the
following properties to limit crosstalk:
• Cancellation - Each wire in a pair of wires uses
opposite polarity. One wire is negative, the other
wire is positive. They are twisted together and the
magnetic fields effectively cancel each other and
outside EMI/RFI.
• Variation in twists per foot in each wire - Each wire
is twisted a different amount, which helps prevent
crosstalk amongst the wires in the cable.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 29
UTP Cabling
UTP Cabling Standards and Connectors
Standards for UTP are established by the TIA/EIA. TIA/EIA-
568 standardizes elements like:
• Cable Types
• Cable Lengths
• Connectors
• Cable Termination
• Testing Methods

Electrical standards for copper cabling are established by the

IEEE, which rates cable according to its performance.
Examples include:
• Category 3
• Category 5 and 5e
• Category 6
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 30
UTP Cabling
UTP Cabling Standards and Connectors (Cont.)

RJ-45 Connector Poorly terminated UTP cable

Properly terminated UTP cable

Cable Type Standard Application

Ethernet Straight-through Both ends T568A or T568B Host to Network Device

Ethernet Crossover * One end T568A, other end Host-to-Host, Switch-to-Switch,

T568B Router-to-Router
* Considered Legacy due to most NICs using Auto-MDIX to sense cable type and complete connection
Rollover Cisco Proprietary Host serial port to Router or Switch
Console Port, using an adapter
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 32
4.5 Fiber-Optic Cabling

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 33
Fiber-Optic Cabling
Properties of Fiber-Optic Cabling
• Not as common as UTP because of the expense involved
• Ideal for some networking scenarios
• Transmits data over longer distances at higher bandwidth than any other
networking media
• Less susceptible to attenuation, and completely immune to EMI/RFI
• Made of flexible, extremely thin strands of very pure glass
• Uses a laser or LED to encode bits as pulses of light
• The fiber-optic cable acts as a wave guide to transmit light between the two
ends with minimal signal loss

• Larger core
• Very small core
• Uses less expensive LEDs
• Uses expensive lasers
• LEDs transmit at different angles
• Long-distance applications
• Up to 10 Gbps over 550 meters

Dispersion refers to the spreading out of a light pulse over time. Increased dispersion means
increased loss of signal strength. MMF has greater dispersion than SMF, with a the maximum cable
distance for MMF is 550 meters.
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 35
Fiber-Optic Cabling
Fiber-Optic Cabling Usage

Fiber-optic cabling is now being used in four types of industry:

1. Enterprise Networks - Used for backbone cabling applications and interconnecting

infrastructure devices
2. Fiber-to-the-Home (FTTH) - Used to provide always-on broadband services to
homes and small businesses
3. Long-Haul Networks - Used by service providers to connect countries and cities
4. Submarine Cable Networks - Used to provide reliable high-speed, high-capacity
solutions capable of surviving in harsh undersea environments at up to transoceanic
distances.

Our focus in this course is the use of fiber within the enterprise.

Lucent Connector (LC) Simplex Connectors

Straight-Tip (ST) Connectors

Subscriber Connector (SC) Connectors Duplex Multimode LC Connectors

SC-SC MM Patch Cord LC-LC SM Patch Cord ST-LC MM Patch Cord ST-SC SM Patch Cord

A yellow jacket is for single-mode fiber cables and orange (or aqua) for multimode fiber
cables.
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 38
Fiber-Optic Cabling
Fiber versus Copper
Optical fiber is primarily used as backbone cabling for high-traffic, point-to-point
connections between data distribution facilities and for the interconnection of buildings
in multi-building campuses.
Implementation Issues UTP Cabling Fiber-Optic Cabling

Bandwidth supported 10 Mb/s - 10 Gb/s 10 Mb/s - 100 Gb/s

Distance Relatively short (1 - 100 meters) Relatively long ( 1 - 100,000 meters)

Immunity to EMI and RFI Low High (Completely immune)

Immunity to electrical hazards Low High (Completely immune)

Media and connector costs Lowest Highest

Installation skills required Lowest Highest

Safety precautions Lowest Highest

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 40
Wireless Media
Properties of Wireless Media
It carries electromagnetic signals representing binary digits using radio or
microwave frequencies. This provides the greatest mobility option. Wireless
connection numbers continue to increase.

Some of the limitations of wireless:

• Coverage area - Effective coverage can be significantly impacted by the physical
characteristics of the deployment location.
• Interference - Wireless is susceptible to interference and can be disrupted by many
common devices.
• Security - Wireless communication coverage requires no access to a physical strand
of media, so anyone can gain access to the transmission.
• Shared medium - WLANs operate in half-duplex, which means only one device can
send or receive at a time. Many users accessing the WLAN simultaneously results in
reduced bandwidth for each user.
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 41
Wireless Media
Types of Wireless Media
The IEEE and telecommunications industry standards for wireless data communications
cover both the data link and physical layers. In each of these standards, physical layer
specifications dictate:
• Data to radio signal encoding methods
• Frequency and power of transmission
• Signal reception and decoding requirements
• Antenna design and construction

Wireless Standards:
• Wi-Fi (IEEE 802.11) - Wireless LAN (WLAN) technology
• Bluetooth (IEEE 802.15) - Wireless Personal Area network (WPAN) standard
• WiMAX (IEEE 802.16) - Uses a point-to-multipoint topology to provide broadband wireless
access
• Zigbee (IEEE 802.15.4) - Low data-rate, low power-consumption communications, primarily
for Internet of Things (IoT) applications
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 42
Wireless Media
Wireless LAN
In general, a Wireless LAN (WLAN) requires the following devices:
• Wireless Access Point (AP) - Concentrate wireless signals from users and
connect to the existing copper-based network infrastructure
• Wireless NIC Adapters - Provide wireless communications capability to
network hosts

There are a number of WLAN standards. When purchasing WLAN equipment,

ensure compatibility, and interoperability.

Network Administrators must develop and apply stringent security policies and
processes to protect WLANs from unauthorized access and damage.

• Connect to the Cloud

• Connect a Router
• Connect Remaining Devices
• Verify Connections
• Examine the Physical Topology

• Identify and Work with PC NICs

• Identify and Use the System Tray Network Icons

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 46
Module Practice and Quiz
What did I learn in this module?
• Before any network communications can occur, a physical connection to a local network,
either wired or wireless, must be established.
• The physical layer consists of electronic circuitry, media, and connectors developed by
engineers.
• The physical layer standards address three functional areas: physical components,
encoding, and signaling.
• Three types of copper cabling are: UTP, STP, and coaxial cable (coax).
• UTP cabling conforms to the standards established jointly by the TIA/EIA. The electrical
characteristics of copper cabling are defined by the Institute of Electrical and Electronics
Engineers (IEEE).
• The main cable types that are obtained by using specific wiring conventions are Ethernet
Straight-through and Ethernet Crossover.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 47
Module Practice and Quiz
What did I learn in this module (Cont.)?
• Optical fiber cable transmits data over longer distances and at higher bandwidths than any
other networking media.
• There are four types of fiber-optic connectors: ST, SC, LC, and duplex multimode LC.
• Fiber-optic patch cords include SC-SC multimode, LC-LC single-mode, ST-LC multimode,
and SC-ST single-mode.
• Wireless media carry electromagnetic signals that represent the binary digits of data
communications using radio or microwave frequencies. Wireless does have some limitations,
including coverage area, interference, security, and the problems that occur with any shared
medium.
• Wireless standards include the following: Wi-Fi (IEEE 802.11), Bluetooth (IEEE 802.15),
WiMAX (IEEE 802.16), and Zigbee (IEEE 802.15.4).
• Wireless LAN (WLAN) requires a wireless AP and wireless NIC adapters.

• Identify Physical Characteristics of Internetworking Devices

• Select Correct Modules for Connectivity

• Connect Devices

• Check Connectivity

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 50
Module 4: Physical Layer
New Terms and Commands
• Telecommunications Industry • Ethernet Straight-through
Association/Electronic Industries Association • Ethernet crossover
(TIA/EIA) • Rollover
• latency • Single-Mode Fiber (SMF)
• throughput • Multimode (MMF)
• goodput • Straight-tip (ST) Connectors
• Electromagnetic interference (EMI) • Subscriber Connector (SC) Connectors
• Radio frequency interference (RFI) • Lucent Connector (LC) Simplex Connectors
• Crosstalk • Duplex Multimode LC Connectors
• Unshielded Twisted Pair (UTP) • Bluetooth (IEEE 802.15)
• Shielded Twisted Pair (STP) • WiMAX (IEEE 802.16)
• Coaxial cable • Zigbee (IEEE 802.15.4)
• RJ-45 • Wireless Access Point (AP)
• Cancellation
• TIA/EIA-568

Module Objective: Calculate numbers between decimal, binary, and hexadecimal systems.

Topic Title Topic Objective

Binary Number System Calculate numbers between decimal and binary
systems.
Hexadecimal Number System Calculate numbers between decimal and
hexadecimal systems.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 10
Binary Number System
Binary and IPv4 Addresses
• Binary numbering system consists of 1s and 0s, called bits
• Decimal numbering system consists of digits 0 through 9
• Hosts, servers, and network equipment using binary addressing to identify each other.
• Each address is made up of a string of 32 bits, divided into four sections called octets.
• Each octet contains 8 bits (or 1 byte) separated by a dot.
• For ease of use by people, this dotted notation is converted to dotted decimal.

This video will cover the following:

• Positional notation review

• Powers of 10 review
• Decimal – base 10 numbering review
• Binary – base 2 numbering review
• Convert an P address in binary to decimal numbering

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 12
Binary Number System
Binary Positional Notation
• Positional notation means that a digit represents different values depending on the
“position” the digit occupies in the sequence of numbers.
• The decimal positional notation system operates as shown in the tables below.

Thousands Hundreds Tens Ones

Radix 10 10 10 10
Positional Value 1000 100 10 1
Position in Number 3 2 1 0 Decimal Number (1234) 1 2 3 4

Calculate (103) (102) (101) (100) Calculate 1 x 1000 2 x 100 3 x 10 4x1

Position Value 1000 100 10 1 Add them up… 1000 + 200 + 30 +4

Result 1,234

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 13
Binary Number System
Binary Positional Notation (Cont.)
The binary positional notation system operates as shown in the tables below.
Radix 2 2 2 2 2 2 2 2

Position in Number 7 6 5 4 3 2 1 0

Calculate (27) (26) (25) (24) (23) (22) (21) (20)

Position Value 128 64 32 16 8 4 2 1

Positional Value 128 64 32 16 8 4 2 1

Binary Number (11000000) 1 1 0 0 0 0 0 0

Calculate 1x128 1x64 0x32 0x16 0x8 0x4 0x2 0x1

Add Them Up… 128 + 64 +0 +0 +0 +0 +0 +0

Result 192

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 14
Binary Number System
Convert Binary to Decimal
Convert 11000000.10101000.00001011.00001010 to decimal.
Positional Value 128 64 32 16 8 4 2 1

Binary Number (11000000) 1 1 0 0 0 0 0 0

Calculate 1x128 1x64 0x32 0x16 0x8 0x4 0x2 0x1

Add Them Up… 128 + 64 +0 +0 +0 +0 +0 +0 192

Binary Number (10101000) 1 0 1 0 1 0 0 0

Calculate 1x128 0x64 1x32 0x16 1x8 0x4 0x2 0x1

Add Them Up… 128 +0 + 32 +0 +8 +0 +0 +0

168
Binary Number (00001011) 0 0 0 0 1 0 1 1
192.168.11.10
Calculate 0x128 0x64 0x32 0x16 1x8 0x4 1x2 1x1

Add Them Up… 0 +0 +0 +0 +8 +0 +2 +1 11

Binary Number (00001010) 0 0 0 0 1 0 1 0

Calculate 0x128 0x64 0x32 0x16 1x8 0x4 1x2 0x1

Add Them Up… 0 +0 +0 +0 +8 +0 +2 +0 10

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 15
Binary Number System
Decimal to Binary Conversion
The binary positional value table is useful in converting a dotted decimal IPv4 address to
binary.

• Start in the 128 position (the most

significant bit). Is the decimal number of
the octet (n) equal to or greater than
128?
• If no, record a binary 0 in the 128
positional value and move to the 64
positional value.
• If yes, record a binary 1 in the 128
positional value, subtract 128 from the
decimal number, and move to the 64
positional value.
• Repeat these steps through the 1
positional value.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 16
Binary Number System
Decimal to Binary Conversion Example
• Convert decimal 168 to binary
Is 168 > 128?
- Yes, enter 1 in 128 position and subtract 128 (168-128=40)
Is 40 > 64?
- No, enter 0 in 64 position and move on
Is 40 > 32?
- Yes, enter 1 in 32 position and subtract 32 (40-32=8)
Is 8 > 16?
- No, enter 0 in 16 position and move on
Is 8 > 8?
- Equal. Enter 1 in 8 position and subtract 8 (8-8=0)
No values left. Enter 0 in remaining binary positions
128 64 32 16 8 4 2 1

1 0 1 0 1 0 0 0

Decimal 168 is written as 10101000 in binary

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 17
Binary Number System
IPv4 Addresses
• Routers and computers only understand binary, while humans work in
decimal. It is important for you to gain a thorough understanding of these
two numbering systems and how they are used in networking.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 19
Hexadecimal Number System
Hexadecimal and IPv6 Addresses
• To understand IPv6 addresses,
you must be able to convert
hexadecimal to decimal and
vice versa.
• Hexadecimal is a base sixteen
numbering system, using the
digits 0 through 9 and letters A
to F.
• It is easier to express a value
as a single hexadecimal digit
than as four binary bit.
• Hexadecimal is used to
represent IPv6 addresses and
MAC addresses.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 20
Hexadecimal Number System
Hexadecimal and IPv6 Addresses (Cont.)
• IPv6 addresses are 128 bits in
length. Every 4 bits is
represented by a single
hexadecimal digit. That makes
the IPv6 address a total of 32
hexadecimal values.
• The figure shows the preferred
method of writing out an IPv6
address, with each X
representing four hexadecimal
values.
• Each four hexadecimal
character group is referred to
as a hextet.

This video will cover the following:

• Characteristics of the Hexadecimal System

• Convert from Hexadecimal to Decimal
• Convert from Decimal to Hexadecimal

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 22
Hexadecimal Number System
Decimal to Hexadecimal Conversions
Follow the steps listed to convert decimal numbers to hexadecimal values:
• Convert the decimal number to 8-bit binary strings.
• Divide the binary strings in groups of four starting from the rightmost position.
• Convert each four binary numbers into their equivalent hexadecimal digit.

For example, 168 converted into hex using the three-step process.
• 168 in binary is 10101000.
• 10101000 in two groups of four binary digits is 1010 and 1000.
• 1010 is hex A and 1000 is hex 8, so 168 is A8 in hexadecimal.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 23
Hexadecimal Number System
Hexadecimal to Decimal Conversions
Follow the steps listed to convert hexadecimal numbers to decimal values:
• Convert the hexadecimal number to 4-bit binary strings.
• Create 8-bit binary grouping starting from the rightmost position.
• Convert each 8-bit binary grouping into their equivalent decimal digit.

For example, D2 converted into decimal using the three-step process:

• D2 in 4-bit binary strings is 1110 and 0010.
• 1110 and 0010 is 11100010 in an 8-bit grouping.
• 11100010 in binary is equivalent to 210 in decimal, so D2 is 210 is decimal

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 25
Module Practice and Quiz
What did I learn in this module?
• Binary is a base two numbering system that consists of the numbers 0 and 1, called bits.
• Decimal is a base ten numbering system that consists of the numbers 0 through 9.
• Binary is what hosts, servers, and networking equipment uses to identify each other.
• Hexadecimal is a base sixteen numbering system that consists of the numbers 0 through 9 and
the letters A to F.
• Hexadecimal is used to represent IPv6 addresses and MAC addresses.
• IPv6 addresses are 128 bits long, and every 4 bits is represented by a hexadecimal digit for a total
of 32 hexadecimal digits.
• To convert hexadecimal to decimal, you must first convert the hexadecimal to binary, then convert
the binary to decimal.
• To convert decimal to hexadecimal, you must first convert the decimal to binary and then the
binary to hexadecimal.

• positional notation

• base 10

• base 16

• radix

• octet

• hextet

Crimson Rivers PDF
100% (8)
Crimson Rivers PDF
2,563 pages
Peer-E-Kamil - by Umera Ahmed (Roman Urdu Translation by Sk. Danish) Malgun Gothic1
96% (136)
Peer-E-Kamil - by Umera Ahmed (Roman Urdu Translation by Sk. Danish) Malgun Gothic1
492 pages
Not Without My Daughter-Betty Mahmoody
80% (97)
Not Without My Daughter-Betty Mahmoody
385 pages
Garam Khandan
100% (3)
Garam Khandan
585 pages
EATMORE2BEHAPPY - Ang Mutya NG Section E (Part Three) The Final Battle
84% (67)
EATMORE2BEHAPPY - Ang Mutya NG Section E (Part Three) The Final Battle
2,146 pages
Bad Life (VOL 1-4)
91% (11)
Bad Life (VOL 1-4)
788 pages
Dating Format
91% (34)
Dating Format
33 pages
Bad Life (VOL 1-4)
100% (5)
Bad Life (VOL 1-4)
779 pages
Art Heist Baby
No ratings yet
Art Heist Baby
458 pages
"Can't Hurt Me": David Goggins
88% (8)
"Can't Hurt Me": David Goggins
12 pages
Socialism in Europe and The Russian Revolution - Shobhit Nirwan
84% (75)
Socialism in Europe and The Russian Revolution - Shobhit Nirwan
17 pages
The Husky and His White Cat Shizun - Erha He Ta de Bai Mao Shizun Vol. 1
90% (10)
The Husky and His White Cat Shizun - Erha He Ta de Bai Mao Shizun Vol. 1
440 pages
I Fell in Love With Blind Man 1 To 50
91% (23)
I Fell in Love With Blind Man 1 To 50
826 pages
Treasure of Nadia Walkthrough
80% (41)
Treasure of Nadia Walkthrough
226 pages
Fei Tian Ye Xiang 非天夜翔 Dinghai Fusheng Records 定海浮生录
100% (11)
Fei Tian Ye Xiang 非天夜翔 Dinghai Fusheng Records 定海浮生录
2,296 pages
The Graham Effect Campus Diaries Book 1 Elle Kennedy Z Library
86% (14)
The Graham Effect Campus Diaries Book 1 Elle Kennedy Z Library
329 pages
ELS Answers Only
20% (5)
ELS Answers Only
20 pages
The Girl in The Green Dress - Jeni Haynes, George Blair-West
100% (5)
The Girl in The Green Dress - Jeni Haynes, George Blair-West
401 pages
7th Time Loop 05
91% (22)
7th Time Loop 05
276 pages
Manhoos Se Mahan Tak
No ratings yet
Manhoos Se Mahan Tak
3,252 pages
You Amp Me - Tal Bauer
80% (10)
You Amp Me - Tal Bauer
304 pages
Metal Slinger - Rachel Schne
60% (5)
Metal Slinger - Rachel Schne
366 pages
Maza Ya Saza (Family Incest)
33% (3)
Maza Ya Saza (Family Incest)
26 pages
Lord of The Mysteries 1
100% (5)
Lord of The Mysteries 1
865 pages
Wind and Truth The Brand New Epic Stormli Brandon Sanderson
100% (3)
Wind and Truth The Brand New Epic Stormli Brandon Sanderson
1,592 pages
Maleeha Meri Behan
88% (40)
Maleeha Meri Behan
57 pages
Liberal Family 1
59% (54)
Liberal Family 1
226 pages
Mera Nam Ahsan He or Mere Ghar Me Ham 5 Log Hain
67% (15)
Mera Nam Ahsan He or Mere Ghar Me Ham 5 Log Hain
9 pages
Pakistani Family Insect Saga PDF
64% (47)
Pakistani Family Insect Saga PDF
679 pages
New Microsoft Office Word Document
67% (3)
New Microsoft Office Word Document
115 pages

Combine PDF

Uploaded by

Combine PDF

Uploaded by

Module 1: Networking Today

Introduction to Networks v7.0

• Instructor Planning Guide

Animations Expose learners to new skills and concepts.

Interactive Activities A variety of formats to help learners gauge content understanding.

Module Objective: Explain the advances in modern technologies.

Topic Title Topic Objective

The IT Professional Explain employment opportunities in the networking field.

Communication is almost as important to us as our reliance on air, water, food, and

Media Types Description

Metal wires within cables Uses electrical impulses

Glass or plastic fibers Uses pulses of light.

Wireless transmission Uses modulation of

Network diagrams, often called topology

Note: Often, the terms port and

Medium/Large World Wide

Two most common types of networks:

An intranet is a private collection of LANs

Cable high bandwidth, always on, internet

DSL high bandwidth, always on, internet

Satellite major benefit to rural areas without

DSL Business DSL is available in various

Satellite This can provide a connection when

Before converged networks, an

A scalable network can expand

Have you ever watched a live video with

Several new networking trends that

BYOD allows end users to have the

 Collaboration tools including Cisco

 Collaboration is a very high priority

 Cisco Webex Teams is a

• Video conferencing is a powerful tool for communicating with others.

• Video is becoming a critical requirement for effective collaboration.

• Cisco TelePresence powers is one way of working where everyone,

Cloud computing is made possible by data centers.

Larger networks have additional security

At www.netacad.com you can click the

In this lab, you will complete the following objectives:

Topic Title Topic Objective

Basic Device Configuration Configure a Cisco IOS device using CLI.

Save Configurations Use IOS commands to save the running configuration.

Configure IP Addressing Configure a host device with an IP address.

• A GUI is more user-friendly and requires

• GUIs can fail, crash, or simply not

• Telnet – Establishes an insecure remote

Privileged EXEC Mode:

Global Configuration Mode:

Line Configuration Mode:

Interface Configuration Mode:

This video will cover the following:

• To move directly from one subconfiguration

This video will cover the following:

[x] Square brackets indicate an optional element (keyword or argument).

{x} Braces indicate a required element (keyword or argument).

 The command is ping and the user-defined

This video will cover the following:

Tab Completes a partial command name entry.

Backspace Erases the character to the left of the cursor.

Recalls the commands in the history buffer, beginning with

Keystroke Description Keystroke Description

Note: To see more hot keys and shortcuts refer to 2.3.5.

This video will cover the following:

In this Packet Tracer, you will do the following:

• Establish Basic Connections, Access the CLI, and Explore Help

• Explore EXEC Modes

• Set the Clock

• Access a Cisco Switch through the Serial Console Port

• Display and Configure Basic Device Settings

• (Optional) Access a Cisco Router Using a Mini-USB Console Cable

• Guideline for naming devices:

Securing privileged EXEC mode access:

Note: The “#” in the command syntax is called

This video will cover the following:

This video will cover the following:

Note: The text file created can be used as a record of

In this Packet Tracer, you will do the following: