Scribd Logo
Upload

Welcome to Scribd!

  • 51 views

    Hydraulic Tilt Install 2007 Honey Bee Header

    Uploaded by

    Johannes Becker
    1. The document provides installation instructions for a hydraulic tilt kit for a header on a combine harvester. 2. It describes preparing the header by checking parts and familiarizing oneself with the instructions. 3. The directions explain installing mounting brackets, cylinders, hydraulic and electrical connections depending on the header model. Illustrations show the components and their assembly.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Hydraulic Tilt Install 2007 Honey Bee Header

    Uploaded by

    Johannes Becker
    51 views4 pages
    1. The document provides installation instructions for a hydraulic tilt kit for a header on a combine harvester. 2. It describes preparing the header by checking parts and familiarizing oneself with the instructions. 3. The directions explain installing mounting brackets, cylinders, hydraulic and electrical connections depending on the header model. Illustrations show the components and their assembly.

    Original Description:

    Hydraulic tilt for honey bee

    Original Title

    Hydraulic Tilt Install 2007 honey bee header

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. The document provides installation instructions for a hydraulic tilt kit for a header on a combine harvester. 2. It describes preparing the header by checking parts and familiarizing oneself with the instructions. 3. The directions explain installing mounting brackets, cylinders, hydraulic and electrical connections depending on the header model. Illustrations show the components and their assembly.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    51 views4 pages

    Hydraulic Tilt Install 2007 Honey Bee Header

    Uploaded by

    Johannes Becker
    1. The document provides installation instructions for a hydraulic tilt kit for a header on a combine harvester. 2. It describes preparing the header by checking parts and familiarizing oneself with the instructions. 3. The directions explain installing mounting brackets, cylinders, hydraulic and electrical connections depending on the header model. Illustrations show the components and their assembly.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    Honey Bee Manufacturing Ltd.

    Header Hydraulic Tilt Installation Manual

    Production Header – Hydraulic Tilt Kit - Installation


    Preparation
    Check the contents of the kit against the shipping documents to ensure you have received all
    the correct parts, and that everything is in good condition. Familiarize yourself with the parts
    and these instructions before starting work on the installation. Read through the entire
    manual to get an idea of how it will go together before you start work.

    Directions
    For the purposes of this manual, front refers to the cutter bar portion of the header, rear refers
    to the swath delivery side, left and right are as seen when standing at the rear facing the
    front.

    Installation
    Depending upon the model of your header, you will receive one of three types of mounts.
    Study the following illustrations to identify which you have, and familiarize yourself with the
    parts and their relationships. The hydraulic tilt cylinder will be installed at the top-center of the
    header.
    1. Lower the header onto stable blocks or to the ground, whichever provides the most
    comfortable working height.
    2. Shut the unit down, and wait for all moving parts to stop before leaving the cab.
    3. Release any tension on the manual top link by loosening the lock, and turning the lever
    until the pin is free of any loading.
    4. Remove the pin, and the bolt holding the turnbuckle to the header adapter.
    5. Attach the bracket to the upper tube of the header, using the U-bolts, nuts, and
    washers as shown in Illustration 1: Tilt Cylinder Kit #1- Exploded View, page 2.
    6. Insert the bushing, and bolt the cylinder end of the hydraulic cylinder to the rear
    bracket on the combine adapter, and secure.

    Rev 01 October 2, 2007 1


    Honey Bee Manufacturing Ltd.
    Header Hydraulic Tilt Installation Manual

    Illustration 1: Tilt Cylinder Kit #1- Exploded View

    Illustration 2: Tilt Cylinder Mount #2 - Exploded View

    Rev 01 October 2, 2007 2


    Honey Bee Manufacturing Ltd.
    Header Hydraulic Tilt Installation Manual

    Illustration 3: Tilt Cylinder Mount #3 - Illustration 4: Tilt Cylinder Mount #3 -


    Exploded View Assembled View

    7. Manually extend the ram, if necessary, insert a bushing (not shown in Illustration 1)
    into the Heim-joint and secure it to the forward bracket with a pin (not shown), and
    spring-lock key (not shown in Illustration 1).
    8. Attach the Retract and Extend lines to the tilt cylinder, as shown below.

    Illustration 5: Hydraulic Connections to Tilt


    Cylinder

    Rev 01 October 2, 2007 3


    Honey Bee Manufacturing Ltd.
    Header Hydraulic Tilt Installation Manual

    9. Locate the flow control mounting


    bracket, on the underside of the main
    tube of the header, toward the left hand
    side of the opening. Orient the flow
    control valve with the electrical plugs
    facing the rear, and attach it with the
    supplied bolts, nuts and washers.
    10. Connect the cylinder “Extend” hose (1)
    to (1) on the controller and the cylinder
    “Retract” hose (2) to (2).
    11. Connect the reel “Fore” (3) to (3), and
    the reel “Aft” (4) to (4). Connections (5)
    and (6) are used by the combine. Illustration 6: Hydraulic Connections

    12. Connect the wiring plugs to the valve body and run the lead back to the main electrical
    plug(s) being certain to avoid pinch points and to provide adequate wire length for
    header movement. Care in routing the wire will prevent early failure of the electric
    circuits.
    13. Consult your combine manual for the wiring diagram from the combine plug, and insert
    the pins for the tilt control into the plug as indicated.
    14. Start the combine, lift the header clear of the ground, and test the operation of the tilt.
    (Bleeding the hydraulics required?)

    Rev 01 October 2, 2007 4

    You might also like