Scribd
Upload
60 views1 page

Mapping Acotm Abb Iec104

This document contains information about binary and analog input/output point addresses for a substation automation system. It lists signal names, their associated IEC 61850 naming, and data types. There are 1013 binary input points covering statuses like equipment positions, interlocks, and alarms. Binary output points control circuit breakers and interlocks. Analog inputs measure phase voltages from two voltage measurement units in both floating point and normalized formats.

Uploaded by

Kucluk Kunyuk
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
60 views1 page

Mapping Acotm Abb Iec104

This document contains information about binary and analog input/output point addresses for a substation automation system. It lists signal names, their associated IEC 61850 naming, and data types. There are 1013 binary input points covering statuses like equipment positions, interlocks, and alarms. Binary output points control circuit breakers and interlocks. Analog inputs measure phase voltages from two voltage measurement units in both floating point and normalized formats.

Uploaded by

Kucluk Kunyuk
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

BINARY INPUT

Point Address Signal Name IEC 61850 Name Type


1000 LOCAL/REMOTE CTRL.LLN0.Loc.stVal M_SP_xx
1001 INC 1 CB POSITION CTRL.DCCSWI1.Pos.stVal M_DP_xx
1002 INC 2 CB POSITION CTRL.DCCSWI2.Pos.stVal M_DP_xx
1003 EARTHING CB1 POSITION CTRL.ESSCSWI1.Pos.stVal M_DP_xx
1004 EARTHING CB2 POSITION CTRL.ESSCSWI2.Pos.stVal M_DP_xx
1005 BYPASS INTERLOCK AKTIF LD0.SPCGAPC2.SPCSO1.stVal M_SP_xx
1006 ATS NON PRIORITY AKTIF LD0.XGGIO110.Ind6.stVal M_SP_xx
1007 ATS PRIORITY 1 AKTIF LD0.XGGIO110.Ind7.stVal M_SP_xx
1008 ATS PRIORITY 2 AKTIF LD0.XGGIO110.Ind8.stVal M_SP_xx
1009 DOOR OPEN LD0.MVGAPC1.SPCSO1.stVal M_SP_xx
1011 AC FAIL LD0.MVGAPC1.SPCSO3.stVal M_SP_xx
1012 BATTERY FAIL LD0.MVGAPC1.SPCSO4.stVal M_SP_xx
1013 MCB MOTOR TRIP LD0.MVGAPC1.SPCSO5.stVal M_SP_xx
1015 CB 1 SPRING CHARGED LD0.XGGIO110.Ind1.stVal M_SP_xx
1016 CB 2 SPRING CHARGED LD0.XGGIO110.Ind2.stVal M_SP_xx

BINARY OUTPUT
Point Address Signal Name IEC 61850 Name Type
2000 CONTROL CB 1 CTRL.DCCSWI1.Pos.Oper.ctlVal C_DC_xx
2001 CONTROL CB 2 CTRL.DCCSWI2.Pos.Oper.ctlVal C_DC_xx
2006 CONTROL BYPASS INTERLOCK LD0.SPCGAPC2.SPCSO1.Oper.ctlVal C_SC_xx

ANALOG INPUT
Point Address Signal Name IEC 61850 Name Type
3000 VMMXU1: 1.U_DB_AB.Float32 LD0.VMMXU1.PPV.phsAB.cVal.mag.f M_ME_xF
3001 VMMXU1: 1.U_DB_BC.Float32 LD0.VMMXU1.PPV.phsBC.cVal.mag.f M_ME_xF
3002 VMMXU1: 1.U_DB_CA.Float32 LD0.VMMXU1.PPV.phsCA.cVal.mag.f M_ME_xF
3003 VMMXU2: 2.U_DB_AB.Float32 LD0.VMMXU2.PPV.phsAB.cVal.mag.f M_ME_xF
3004 VMMXU2: 2.U_DB_BC.Float32 LD0.VMMXU2.PPV.phsBC.cVal.mag.f M_ME_xF
3005 VMMXU2: 2.U_DB_CA.Float32 LD0.VMMXU2.PPV.phsCA.cVal.mag.f M_ME_xF
3006 VMMXU1: 1.U_DB_AB.Normalized LD0.VMMXU1.PPV.phsAB.cVal.mag.f M_ME_xD
3007 VMMXU1: 1.U_DB_BC.Normalized LD0.VMMXU1.PPV.phsBC.cVal.mag.f M_ME_xD
3008 VMMXU1: 1.U_DB_CA.Normalized LD0.VMMXU1.PPV.phsCA.cVal.mag.f M_ME_xD
3009 VMMXU2: 2.U_DB_AB.Normalized LD0.VMMXU2.PPV.phsAB.cVal.mag.f M_ME_xD
3010 VMMXU2: 2.U_DB_BC.Normalized LD0.VMMXU2.PPV.phsBC.cVal.mag.f M_ME_xD
3011 VMMXU2: 2.U_DB_CA.Normalized LD0.VMMXU2.PPV.phsCA.cVal.mag.f M_ME_xD

You might also like