MSDS LITMUS SOLUTION 0.1 N (0,02 M) (Potassium Permanganate 0 .1 N)

Download as pdf or txt
Download as pdf or txt
You are on page 1of 7

No: F/QCL/008 Rev.

01

MATERIAL SAFETY DATA SHEET

LITMUS SOLUTION 0.1 N (0,02 M)

Revision : 00 Date: 17 Februari 2021 MSDS Number : 0299

Section 1 - Chemical Product and Company Identification

1.1 Product Name : LITMUS SOLUTION 0.1 N (0,02 M)


Synonyms :-
CAS No. : 7722-64-7 (mixture)
HS Code : 2841 61 00
Molecular Weight : 158,03 g/mol
Chemical Formula : KMnO4
Product Code : A 2087 A
Brand : SMART-LAB
1.2 Manufacturer :PT.Smart-Lab Indonesia
Address : Ruko Boulevard Taman Tekno Blok E No.10-11,BSD Sektor XI Serpong,
Tangerang - Indonesia
Website :www.smartlab.co.id
Email :[email protected]
For information :Telp: +62-21- 7588 0205(Hunting) , fax:+62-21-7588 0198
1.3 Application : General Chemical reagent
Emergency Telephone: +62-21-7588 0205(Hunting)

Section 2 - Hazards Identification

2.1 Classification of the substance or mixture


Classification according to Regulation (EC) No 1272/2008
Long-term (chronic) aquatic hazard (Category 2), H411

For the full text of the H-Statements mentioned in this Section, see Section 16

2.2 Label elements

Labelling according Regulation (EC) No 1272/2008

Pictogram

Signal word none

Hazard statement(s)
H411 Toxic to aquatic life with long lasting effects.

Precautionary statement(s)
P273 Avoid release to the environment.
P391 Collect spillage.
P501 Dispose of contents/ container to an approved waste
disposal plant.

Supplemental Hazard Statements none

PT.SMART-LAB INDONESIA MSDS – LITMUS SOLUTION 0.1 N (0,02 M) Page 1


No: F/QCL/008 Rev.01

MATERIAL SAFETY DATA SHEET

LITMUS SOLUTION 0.1 N (0,02 M)

Revision : 00 Date: 17 Februari 2021 MSDS Number : 0299

2.3 Other hazards


This substance/mixture contains no components considered to be either persistent, bioaccumulative and
toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

Section 3 - Composition, Information on Ingredients

3.1 Substances
Synonyms : LITMUS SOLUTION 0.1 N (0,02 M)
Formula : KMnO4
Molecular weight : 158,03 g/mol
CAS-No. : 7722-64-7 (mixture)
EC-No. : 231-760-3
Index-No. : 025-002-00-9

Hazardous ingredients according to Regulation (EC) No 1272/2008

Component Classification Concentration


Potassium permanganate CAS-
No. 7722-64-7 Ox. Sol. 2; Acute Tox. 4; Skin Corr.
EC-No. 231-760-3 1C; Eye Dam. 1; Aquatic Acute 1;
Index-No. 025-002-00-9 Aquatic Chronic 1; H272, H302, H314,
H318, H400, H410 M-Factor - Aquatic >= 0,25 - < 1 %
Acute: 10 M-Factor - Aquatic Chronic:
10
Water
(7732-18-5)

For the full text of the H-Statements mentioned in this Section, see Section 16.

Section 4 - First Aid Measures

4.1 Description of first aid measures


General advice
Consult a physician. Show this safety data sheet to the doctor in attendance

If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.

In case of skin contact


Wash off with soap and plenty of water. Consult a physician.

In case of eye contact


Flush eyes with water as a precaution.

If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.

4.2 Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11

PT.SMART-LAB INDONESIA MSDS – LITMUS SOLUTION 0.1 N (0,02 M) Page 2


No: F/QCL/008 Rev.01

MATERIAL SAFETY DATA SHEET

LITMUS SOLUTION 0.1 N (0,02 M)

Revision : 00 Date: 17 Februari 2021 MSDS Number : 0299

4.3 Indication of any immediate medical attention and special treatment needed
No data available

Section 5 - Firefighting Measures

5.1 Extinguishing media


Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide

5.2 Special hazards arising from the substance or mixture


Nature of decomposition products not known.

5.3 Advice for firefighters


Wear self-contained breathing apparatus for firefighting if necessary

5.4 Further information


No data available

Section 6 - Accidental Release Measures

6.1 Personal precautions, protective equipment and emergency procedures


Avoid breathing vapours, mist or gas. Ensure adequate ventilation. For personal protection see section 8.

6.2 Environmental precautions


Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the
environment must be avoided.

6.3 Methods and materials for containment and cleaning up


Keep in suitable, closed containers for disposal.

6.4 Reference to other sections


For disposal see section 13.

Section 7 - Handling and Storage

7.1 Precautions for safe handling


For precautions see section 2.2

7.2 Conditions for safe storage, including any incompatibilities


Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be
carefully resealed and kept upright to prevent leakage. Store in cool place.

7.3 Specific end use(s)


Apart from the uses mentioned in section 1.2 no other specific uses are stipulated

Section 8 - Exposure Controls, Personal Protection

PT.SMART-LAB INDONESIA MSDS – LITMUS SOLUTION 0.1 N (0,02 M) Page 3


No: F/QCL/008 Rev.01

MATERIAL SAFETY DATA SHEET

LITMUS SOLUTION 0.1 N (0,02 M)

Revision : 00 Date: 17 Februari 2021 MSDS Number : 0299

8.1 Control parameters


8.2 Exposure controls

Appropriat engineering controls


Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at
the end of workday.
Personal protective equipment
Eye/face protection
Use equipment for eye protection tested and approved under appropriate government standards
such as NIOSH (US) or EN 166(EU).

Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal
technique (without touching glove's outer surface) to avoid skin contact with this product.
Dispose of contaminated gloves after use in accordance with applicable laws and good
laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the
specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it.

Body Protection
Impervious clothing, The type of protective equipment must be selected according to the
concentration and amount of the dangerous substance at the specific workplace.

Respiratory protection
Respiratory protection not required. For nuisance exposures use type OV/AG (US) or type
ABEK (EU EN 14387) respirator cartridges. Use respirators and components tested and
approved under appropriate government standards such as NIOSH (US) or CEN (EU).

Control of environmental exposure


Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into
the environment must be avoided.

Section 9 - Physical and Chemical Properties

9.1 Information on basic physical and chemical properties


Appearance Form: liquid
Colour: dark purple
Odour No data available
Odour Threshold No data available
pH No data available
Melting point/freezingpoint No data available
Initial boiling point and boiling range No data available
Flash point No data available
Evaporation rate No data available
Flammability (solid, gas) No data available
Upper/lower flammability or No data available
explosive limits No data available
Vapour pressure No data available
Vapour density No data available
Relative density No data available
Water solubility No data available
Partition coefficient: noctanol/water No data available
Auto-ignition temperature No data available
Decomposition temperature No data available
Viscosity No data available

PT.SMART-LAB INDONESIA MSDS – LITMUS SOLUTION 0.1 N (0,02 M) Page 4


No: F/QCL/008 Rev.01

MATERIAL SAFETY DATA SHEET

LITMUS SOLUTION 0.1 N (0,02 M)

Revision : 00 Date: 17 Februari 2021 MSDS Number : 0299

Explosive properties No data available


Oxidizing properties No data available

9.2 Other safety information


No data available

Section 10 - Stability and Reactivity

10.1 Reactivity
No data available

10.2 Chemical stability


Stable under recommended storage conditions

10.3 Possibility of hazardous reactions


No data available

10.4 Conditions to avoid


No data available

10.5 Incompatible materials


Zinc, Powdered metals, Peroxides, Copper, Strong reducing agents

10.6 Hazardous decomposition products


Hazardous decomposition products formed under fire conditions. - Nature of decomposition products not
known. Other decomposition products - No data available In the event of fire: see section 5

Section 11 - Toxicological Information

11.1 Information on toxicological effects


Acute toxicity
No data available

Skin corrosion/irritation
No data available

Serious eye damage/eye irritation


No data available

Respiratory or skin sensitisation


No data available

Germ cell mutagenicity


No data available

Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is
identified as probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
No data available

Specific target organ toxicity - single exposure


No data available

PT.SMART-LAB INDONESIA MSDS – LITMUS SOLUTION 0.1 N (0,02 M) Page 5


No: F/QCL/008 Rev.01

MATERIAL SAFETY DATA SHEET

LITMUS SOLUTION 0.1 N (0,02 M)

Revision : 00 Date: 17 Februari 2021 MSDS Number : 0299

Specific target organ toxicity - repeated exposure


No data available

Aspiration hazard
No data available

Additional Information
RTECS: Not available
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.

Section 12 - Ecological Information

12.1 Toxicity
No data available

12.2 Persistence and degradability


No data available

12.3 Bioaccumulative potential


No data available

12.4 Mobility in soil


No data available

12.5 Results of PBT and vPvB assessment


This substance/mixture contains no components considered to be either persistent, bioaccumulative and
toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher

12.6 Other adverse effects


Toxic to aquatic life with long lasting effects

Section 13 - Disposal Considerations

13.1 Waste treatment methods


Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Waste material must be
disposed of in accordance with the Directive on waste 2008/98/EC as well as other national and local
regulations. Leave chemicals in original containers. No mixing with other waste. Handle uncleaned
containers like the product itself.

Contaminated packaging
Dispose of as unused product.

Section 14 - Transport Information

14.1 UN number
ADR/RID: - IMDG: - IATA: -
14.2 UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
PT.SMART-LAB INDONESIA MSDS – LITMUS SOLUTION 0.1 N (0,02 M) Page 6
No: F/QCL/008 Rev.01

MATERIAL SAFETY DATA SHEET

LITMUS SOLUTION 0.1 N (0,02 M)

Revision : 00 Date: 17 Februari 2021 MSDS Number : 0299

IATA: Not dangerous goods


14.3 Transport hazard class(es)
ADR/RID: - IMDG: - IATA: -
14.4 Packaging group
ADR/RID: - IMDG: - IATA: -
14.5 Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
14.6 Special precautions for user
Further information
No data available

Section 15 - Regulatory Information

15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
15.2 Chemical safety assessment
For this product a chemical safety assessment was not carried out

Section 16 - Additional Information

Full text of H-Statements referred to under sections 2 and 3.


H272 May intensify fire; oxidizer.
H302 Harmful if swallowed.
H314 Causes severe skin burns and eye damage.
H318 Causes serious eye damage.
H400 Very toxic to aquatic life.
H410 Very toxic to aquatic life with long lasting effects.
H411 Toxic to aquatic life with long lasting effects

National Fire Protection Association (U.S.A.):


Health: 1
Flammability: 0
Reactivity: 0

Further information
The above information is believed to be correct but does not purport to be all inclusive and shall be used only as
a guide. The information in this document is based on the present state of our knowledge and is applicable to
the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties
of the product. PT. Smartlab Indonesia Corporation and its Affiliates shall not be held liable for any damage
resulting from handling or from contact with the above product. See www.sigmaaldrich.com and/or the reverse
side of invoice or packing slip for additional terms and conditions of sale.

PT.SMART-LAB INDONESIA MSDS – LITMUS SOLUTION 0.1 N (0,02 M) Page 7

You might also like