Q1. What is verification?

A: Verification ensures the product is designed to deliver all functionality to the customer; it typically
involves reviews and meetings to evaluate documents, plans, code, requirements and specifications; this
can be done with checklists, issues lists, walkthroughs and inspection meetings. You CAN learn to do
verification, with little or no outside help.

Q2. What is validation?

A: Validation ensures that functionality, as defined in requirements, is the intended behavior of the
product; validation typically involves actual testing and takes place after verifications are completed.

Q3. What is a walkthrough?

A: A walkthrough is an informal meeting for evaluation or informational purposes. A walkthrough is also a
process at an abstract level. It's the process of inspecting software code by following paths through the
code (as determined by input conditions and choices made along the way). The purpose of code
walkthroughs is to ensure the code fits the purpose. Walkthroughs also offer opportunities to assess an
individual's or team's competency.

Q4. What is an inspection?

A: An inspection is a formal meeting, more formalized than a walkthrough and typically consists of 3-10
people including a moderator, reader (the author of whatever is being reviewed) and a recorder (to make
notes in the document). The subject of the inspection is typically a document, such as a requirements
document or a test plan. The purpose of an inspection is to find problems and see what is missing, not to
fix anything. The result of the meeting should be documented in a written report. Attendees should
prepare for this type of meeting by reading through the document, before the meeting starts; most
problems are found during this preparation. Preparation for inspections is difficult, but is one of the most
cost-effective methods of ensuring quality, since bug prevention is more cost effective than bug
detection.

Q5. What is quality?

A: Quality software is software that is reasonably bug-free, delivered on time and within budget, meets
requirements and expectations and is maintainable. However, quality is a subjective term. Quality
depends on who the customer is and their overall influence in the scheme of things. Customers of a
software development project include end-users, customer acceptance test engineers, testers, customer
contract officers, customer management, the development organization's management, test engineers,
testers, salespeople, software engineers, stockholders and accountants. Each type of customer will have
his or her own slant on quality. The accounting department might define quality in terms of profits, while
an end-user might define quality as user friendly and bug free.

Q6. What is good code?

A: A good code is code that works, is free of bugs and is readable and maintainable. Organizations
usually have coding standards all developers should adhere to, but every programmer and software
engineer has different ideas about what is best and what are too many or too few rules. We need to keep
in mind that excessive use of rules can stifle both productivity and creativity. Peer reviews and code
analysis tools can be used to check for problems and enforce standards.

Q7. What is good design?

A: Design could mean to many things, but often refers to functional design or internal design. Good
functional design is indicated by software functionality can be traced back to customer and end-user
requirements. Good internal design is indicated by software code whose overall structure is clear,
understandable, easily modifiable and maintainable; is robust with sufficient error handling and status
logging capability; and works correctly when implemented.

Q8. What is software life cycle?

1
A: Software life cycle begins when a software product is first conceived and ends when it is no longer in
use. It includes phases like initial concept, requirements analysis, functional design, internal design,
documentation planning, test planning, coding, document preparation, integration, testing, maintenance,
updates, re-testing and phase-out.

Q9. Why are there so many software bugs?

A: Generally speaking, there are bugs in software because of unclear requirements, software complexity,
programming errors, changes in requirements, errors made in bug tracking, time pressure, poorly
documented code and/or bugs in tools used in software development.
 There are unclear software requirements because there is miscommunication as to what the
software should or shouldn't do.
 Software complexity. All of the followings contribute to the exponential growth in software and
system complexity: Windows interfaces, client-server and distributed applications, data
communications, enormous relational databases and the sheer size of applications.
 Programming errors occur because programmers and software engineers, like everyone else, can
make mistakes.
 As to changing requirements, in some fast-changing business environments, continuously
modified requirements are a fact of life. Sometimes customers do not understand the effects of
changes, or understand them but request them anyway. And the changes require redesign of the
software, rescheduling of resources and some of the work already completed have to be redone
or discarded and hardware requirements can be effected, too.
 Bug tracking can result in errors because the complexity of keeping track of changes can result in
errors, too.
 Time pressures can cause problems, because scheduling of software projects is not easy and it
often requires a lot of guesswork and when deadlines loom and the crunch comes, mistakes will
be made.
 Code documentation is tough to maintain and it is also tough to modify code that is poorly
documented. The result is bugs. Sometimes there is no incentive for programmers and software
engineers to document their code and write clearly documented, understandable code.
Sometimes developers get kudos for quickly turning out code, or programmers and software
engineers feel they cannot have job security if everyone can understand the code they write, or
they believe if the code was hard to write, it should be hard to read.
 Software development tools, including visual tools, class libraries, compilers, scripting tools, can
introduce their own bugs. Other times the tools are poorly documented, which can create
additional bugs.

Q10. How do you introduce a new software QA process?

A: It depends on the size of the organization and the risks involved. For large organizations with high-risk
projects, a serious management buy-in is required and a formalized QA process is necessary. For medium
size organizations with lower risk projects, management and organizational buy-in and a slower, step-by-
step process are required. Generally speaking, QA processes should be balanced with productivity, in
order to keep any bureaucracy from getting out of hand. For smaller groups or projects, an ad-hoc
process is more appropriate. A lot depends on team leads and managers; feedback to developers and
good communication is essential among customers, managers, developers, test engineers and testers.
Regardless the size of the company, the greatest value for effort is in managing requirement processes,
where the goal is requirements that are clear, complete and testable.

Q11. Give me five common problems that occur during software development.
A: Poorly written requirements, unrealistic schedules, inadequate testing, adding new features after
development is underway and poor communication.
Requirements are poorly written when requirements are unclear, incomplete, too general, or not testable;
therefore there will be problems.
The schedule is unrealistic if too much work is crammed in too little time.

2
Software testing is inadequate if none knows whether or not the software is any good until customers
complain or the system crashes.
It's extremely common that new features are added after development is underway.
Miscommunication either means the developers don't know what is needed, or customers have unrealistic
expectations and therefore problems are guaranteed.

Q12. Do automated testing tools make testing easier?

A: Yes and no. For larger projects, or ongoing long-term projects, they can be valuable. But for small
projects, the time needed to learn and implement them is usually not worthwhile. A common type of
automated tool is the record/playback type. For example, a test engineer clicks through all combinations
of menu choices, dialog box choices, buttons, etc. in a GUI and has an automated testing tool record and
log the results. The recording is typically in the form of text, based on a scripting language that the
testing tool can interpret. If a change is made (e.g. new buttons are added, or some underlying code in
the application is changed), the application is then re-tested by just playing back the recorded actions
and compared to the logged results in order to check effects of the change. One problem with such tools
is that if there are continual changes to the product being tested, the recordings have to be changed so
often that it becomes a very time-consuming task to continuously update the scripts. Another problem
with such tools is the interpretation of the results (screens, data, logs, etc.) that can be a time-
consuming task.

Q13. Give me five solutions to problems that occur during software development.
A: Solid requirements, realistic schedules, adequate testing, firm requirements and good communication.
Ensure the requirements are solid, clear, complete, detailed, cohesive, attainable and testable. All players
should agree to requirements. Use prototypes to help nail down requirements.
Have schedules that are realistic. Allow adequate time for planning, design, testing, bug fixing, re-testing,
changes and documentation. Personnel should be able to complete the project without burning out.
Do testing that is adequate. Start testing early on, re-test after fixes or changes, and plan for sufficient
time for both testing and bug fixing.
Avoid new features. Stick to initial requirements as much as possible. Be prepared to defend design
against changes and additions, once development has begun and be prepared to explain consequences.
If changes are necessary, ensure they're adequately reflected in related schedule changes. Use
prototypes early on so customers' expectations are clarified and customers can see what to expect; this
will minimize changes later on.
Communicate. Require walkthroughs and inspections when appropriate; make extensive use of e-mail,
networked bug-tracking tools, tools of change management. Ensure documentation is available and up-
to-date. Use documentation that is electronic, not paper. Promote teamwork and cooperation.

Q14. What makes a good test engineer?

A: Rob Davis is a good test engineer because he
Has a "test to break" attitude,
Takes the point of view of the customer,
Has a strong desire for quality,
Has an attention to detail, He's also
Tactful and diplomatic and
Has good a communication skill, both oral and written. And he Has previous software development
experience, too.
Good test engineers have a "test to break" attitude. We, good test engineers, take the point of view of
the customer, have a strong desire for quality and an attention to detail. Tact and diplomacy are useful in
maintaining a cooperative relationship with developers and an ability to communicate with both technical
and non-technical people. Previous software development experience is also helpful as it provides a
deeper understanding of the software development process, gives the test engineer an appreciation for
the developers' point of view and reduces the learning curve in automated test tool programming.

3
Q15. What makes a good QA engineer?
A: The same qualities a good test engineer has are useful for a QA engineer. Additionally, Rob Davis
understands the entire software development process and how it fits into the business approach and the
goals of the organization. Rob Davis' communication skills and the ability to understand various sides of
issues are important. Good QA engineers understand the entire software development process and how it
fits into the business approach and the goals of the organization. Communication skills and the ability to
understand various sides of issues are important.

Q16. What makes a good resume?

A: On the subject of resumes, there seems to be an unending discussion of whether you should or
shouldn't have a one-page resume. The followings are some of the comments I have personally heard:
"Well, Joe Blow (car salesman) said I should have a one-page resume." "Well, I read a book and it said
you should have a one page resume." "I can't really go into what I really did because if I did, it'd take
more than one page on my resume." "Gosh, I wish I could put my job at IBM on my resume but if I did
it'd make my resume more than one page, and I was told to never make the resume more than one page
long." "I'm confused, should my resume be more than one page? I feel like it should, but I don't want to
break the rules." Or, here's another comment, "People just don't read resumes that are longer than one
page." I have heard some more, but we can start with these. So what's the answer? There is no scientific
answer about whether a one-page resume is right or wrong. It all depends on who you are and how
much experience you have. The first thing to look at here is the purpose of a resume. The purpose of a
resume is to get you an interview. If the resume is getting you interviews, then it is considered to be a
good resume. If the resume isn't getting you interviews, then you should change it. The biggest mistake
you can make on your resume is to make it hard to read. Why? Because, for one, scanners don't like odd
resumes. Small fonts can make your resume harder to read. Some candidates use a 7-point font so they
can get the resume onto one page. Big mistake. Two, resume readers do not like eye strain either. If the
resume is mechanically challenging, they just throw it aside for one that is easier on the eyes. Three,
there are lots of resumes out there these days, and that is also part of the problem. Four, in light of the
current scanning scenario, more than one page is not a deterrent because many will scan your resume
into their database. Once the resume is in there and searchable, you have accomplished one of the goals
of resume distribution. Five, resume readers don't like to guess and most won't call you to clarify what is
on your resume. Generally speaking, your resume should tell your story. If you're a college graduate
looking for your first job, a one-page resume is just fine. If you have a longer story, the resume needs to
be longer. Please put your experience on the resume so resume readers can tell when and for whom you
did what. Short resumes -- for people long on experience -- are not appropriate. The real audience for
these short resumes is people with short attention spans and low IQ. I assure you that when your
resume gets into the right hands, it will be read thoroughly.

Q17. What makes a good QA/Test Manager?

A: QA/Test Managers are familiar with the software development process; able to maintain enthusiasm of
their team and promote a positive atmosphere; able to promote teamwork to increase productivity; able
to promote cooperation between Software and Test/QA Engineers, have the people skills needed to
promote improvements in QA processes, have the ability to withstand pressures and say *no* to other
managers when quality is insufficient or QA processes are not being adhered to; able to communicate
with technical and non-technical people; as well as able to run meetings and keep them focused.

Q18. What is the role of documentation in QA?

A: Documentation plays a critical role in QA. QA practices should be documented, so that they are
repeatable. Specifications, designs, business rules, inspection reports, configurations, code changes, test
plans, test cases, bug reports, user manuals should all be documented. Ideally, there should be a system
for easily finding and obtaining of documents and determining what document will have a particular piece
of information. Use documentation change management, if possible.

Q19. What about requirements?

4
A: Requirement specifications are important and one of the most reliable methods of insuring problems in
a complex software project is to have poorly documented requirement specifications. Requirements are
the details describing an application's externally perceived functionality and properties. Requirements
should be clear, complete, reasonably detailed, cohesive, attainable and testable. A non-testable
requirement would be, for example, "user-friendly", which is too subjective. A testable requirement would
be something such as, "the product shall allow the user to enter their previously-assigned password to
access the application". Care should be taken to involve all of a project's significant customers in the
requirements process. Customers could be in-house or external and could include end-users, customer
acceptance test engineers, testers, customer contract officers, customer management, future software
maintenance engineers, salespeople and anyone who could later derail the project. If his/her
expectations aren't met, they should be included as a customer, if possible. In some organizations,
requirements may end up in high-level project plans, functional specification documents, design
documents, or other documents at various levels of detail. No matter what they are called, some type of
documentation with detailed requirements will be needed by test engineers in order to properly plan and
execute tests. Without such documentation there will be no clear-cut way to determine if a software
application is performing correctly.

Q20. What is a test plan?

A: A software project test plan is a document that describes the objectives, scope, approach and focus of
a software testing effort. The process of preparing a test plan is a useful way to think through the efforts
needed to validate the acceptability of a software product. The completed document will help people
outside the test group understand the why and how of product validation. It should be thorough enough
to be useful, but not so thorough that none outside the test group will be able to read it.

Q21. What is a test case?

A: A test case is a document that describes an input, action, or event and its expected result, in order to
determine if a feature of an application is working correctly. A test case should contain particulars such as
a...
Test case identifier;
Test case name;
Objective;
Test conditions/setup;
Input data requirements/steps, and
Expected results.
Please note, the process of developing test cases can help find problems in the requirements or design of
an application, since it requires you to completely think through the operation of the application. For this
reason, it is useful to prepare test cases early in the development cycle, if possible.

Q22. What should be done after a bug is found?

A: When a bug is found, it needs to be communicated and assigned to developers that can fix it. After
the problem is resolved, fixes should be re-tested. Additionally, determinations should be made regarding
requirements, software, hardware, safety impact, etc., for regression testing to check the fixes didn't
create other problems elsewhere. If a problem-tracking system is in place, it should encapsulate these
determinations. A variety of commercial, problem-tracking/management software tools are available.
These tools, with the detailed input of software test engineers, will give the team complete information
so developers can understand the bug, get an idea of its severity, reproduce it and fix it.

Q23. What is configuration management?

A: Configuration management (CM) covers the tools and processes used to control, coordinate and track
code, requirements, documentation, problems, change requests, designs, tools, compilers, libraries,
patches, changes made to them and who makes the changes. Rob Davis has had experience with a full
range of CM tools and concepts. Rob Davis can easily adapt to your software tool and process needs.

5
Q24. What if the software is so buggy it can't be tested at all?
A: In this situation the best bet is to have test engineers go through the process of reporting whatever
bugs or problems initially show up, with the focus being on critical bugs. Since this type of problem can
severely affect schedules and indicates deeper problems in the software development process, such as
insufficient unit testing, insufficient integration testing, poor design, improper build or release procedures,
managers should be notified and provided with some documentation as evidence of the problem.

Q25. How do you know when to stop testing?

A: This can be difficult to determine. Many modern software applications are so complex and run in such
an interdependent environment, that complete testing can never be done. Common factors in deciding
when to stop are...
Deadlines, e.g. release deadlines, testing deadlines;
Test cases completed with certain percentage passed;
Test budget has been depleted;
Coverage of code, functionality, or requirements reaches a specified point;
Bug rate falls below a certain level; or
Beta or alpha testing period ends.

Q26. What if there isn't enough time for thorough testing?

A: Since it's rarely possible to test every possible aspect of an application, every possible combination of
events, every dependency, or everything that could go wrong, risk analysis is appropriate to most
software development projects. Use risk analysis to determine where testing should be focused. This
requires judgment skills, common sense and experience. The checklist should include answers to the
following questions:
Which functionality is most important to the project's intended purpose?
Which functionality is most visible to the user?
Which functionality has the largest safety impact?
Which functionality has the largest financial impact on users?
Which aspects of the application are most important to the customer?
Which aspects of the application can be tested early in the development cycle?
Which parts of the code are most complex and thus most subject to errors?
Which parts of the application were developed in rush or panic mode?
Which aspects of similar/related previous projects caused problems?
Which aspects of similar/related previous projects had large maintenance expenses?
Which parts of the requirements and design are unclear or poorly thought out?
What do the developers think are the highest-risk aspects of the application?
What kinds of problems would cause the worst publicity?
What kinds of problems would cause the most customer service complaints?
What kinds of tests could easily cover multiple functionalities?
Which tests will have the best high-risk-coverage to time-required ratio?

Q27. What if the project isn't big enough to justify extensive testing?
A: Consider the impact of project errors, not the size of the project. However, if extensive testing is still
not justified, risk analysis is again needed and the considerations listed under "What if there isn't enough
time for thorough testing?" do apply. The test engineer then should do "ad hoc" testing, or write up a
limited test plan based on the risk analysis.

Q28. What can be done if requirements are changing continuously?

A: Work with management early on to understand how requirements might change, so that alternate test
plans and strategies can be worked out in advance. It is helpful if the application's initial design allows for
some adaptability, so that later changes do not require redoing the application from scratch. Additionally,
try to...
Ensure the code is well commented and well documented; this makes changes easier for the developers.

6
Use rapid prototyping whenever possible; this will help customers feel sure of their requirements and
minimize changes.
In the project's initial schedule, allow for some extra time to commensurate with probable changes.
Move new requirements to a 'Phase 2' version of an application and use the original requirements for the
'Phase 1' version.
Negotiate to allow only easily implemented new requirements into the project; move more difficult, new
requirements into future versions of the application.
Ensure customers and management understand scheduling impacts, inherent risks and costs of
significant requirements changes. Then let management or the customers decide if the changes are
warranted; after all, that's their job.
Balance the effort put into setting up automated testing with the expected effort required to redo them to
deal with changes.
Design some flexibility into automated test scripts;
Focus initial automated testing on application aspects that are most likely to remain unchanged;
Devote appropriate effort to risk analysis of changes, in order to minimize regression-testing needs;
Design some flexibility into test cases; this is not easily done; the best bet is to minimize the detail in the
test cases, or set up only higher-level generic-type test plans;
Focus less on detailed test plans and test cases and more on ad-hoc testing with an understanding of the
added risk this entails.

Q29. What if the application has functionality that wasn't in the requirements?
A: It may take serious effort to determine if an application has significant unexpected or hidden
functionality, which it would indicate deeper problems in the software development process. If the
functionality isn't necessary to the purpose of the application, it should be removed, as it may have
unknown impacts or dependencies that were not taken into account by the designer or the customer.
If not removed, design information will be needed to determine added testing needs or regression testing
needs. Management should be made aware of any significant added risks as a result of the unexpected
functionality. If the functionality only affects areas, such as minor improvements in the user interface, it
may not be a significant risk.

Q30. How can software QA processes be implemented without stifling productivity?

A: Implement QA processes slowly over time. Use consensus to reach agreement on processes and
adjust and experiment as an organization grows and matures. Productivity will be improved instead of
stifled. Problem prevention will lessen the need for problem detection. Panics and burnout will decrease
and there will be improved focus and less wasted effort. At the same time, attempts should be made to
keep processes simple and efficient, minimize paperwork, promote computer-based processes and
automated tracking and reporting, minimize time required in meetings and promote training as part of
the QA process. However, no one, especially talented technical types, like bureaucracy and in the short
run things may slow down a bit. A typical scenario would be that more days of planning and development
will be needed, but less time will be required for late-night bug fixing and calming of irate customers.

Q31. What if organization is growing so fast that fixed QA processes are impossible?
A: This is a common problem in the software industry, especially in new technology areas. There is no
easy solution in this situation, other than...
Hire good people (i.e. hire Rob Davis)
Ruthlessly prioritize quality issues and maintain focus on the customer;
Everyone in the organization should be clear on what quality means to the customer.

Q32. How is testing affected by object-oriented designs?

A: A well-engineered object-oriented design can make it easier to trace from code to internal design to
functional design to requirements. While there will be little affect on black box testing (where an
understanding of the internal design of the application is unnecessary), white-box testing can be oriented
to the application's objects. If the application was well designed this can simplify test design.

7
Q33. Why do you recommended that we test during the design phase?
A: Because testing during the design phase can prevent defects later on. We recommend verifying three
things...
Verify the design is good, efficient, compact, testable and maintainable.
Verify the design meets the requirements and is complete (specifies all relationships between modules,
how to pass data, what happens in exceptional circumstances, starting state of each module and how to
guarantee the state of each module).
Verify the design incorporates enough memory, I/O devices and quick enough runtime for the final
product.

Q34. What is software quality assurance?

A: Software Quality Assurance, when Rob Davis does it, is oriented to *prevention*. It involves the entire
software development process. Prevention is monitoring and improving the process, making sure any
agreed-upon standards and procedures are followed and ensuring problems are found and dealt with.
Software Testing, when performed by Rob Davis, is also oriented to *detection*. Testing involves the
operation of a system or application under controlled conditions and evaluating the results. Organizations
vary considerably in how they assign responsibility for QA and testing. Sometimes they're the combined
responsibility of one group or individual. Also common are project teams, which include a mix of test
engineers, testers and developers who work closely together, with overall QA processes monitored by
project managers. It depends on what best fits your organization's size and business structure. Rob Davis
can provide QA and/or Software QA. This document details some aspects of how he can provide software
testing/QA service. For more information, e-mail [email protected]

Q35. What is quality assurance?

A: Quality Assurance ensures all parties concerned with the project adhere to the process and
procedures, standards and templates and test readiness reviews.
Rob Davis' QA service depends on the customers and projects. A lot will depend on team leads or
managers, feedback to developers and communications among customers, managers, developers' test
engineers and testers.

Q36. Process and procedures - why follow them?

A: Detailed and well-written processes and procedures ensure the correct steps are being executed to
facilitate a successful completion of a task. They also ensure a process is repeatable. Once Rob Davis has
learned and reviewed customer's business processes and procedures, he will follow them. He will also
recommend improvements and/or additions.

Q37. Standards and templates - what is supposed to be in a document?

A: All documents should be written to a certain standard and template. Standards and templates maintain
document uniformity. It also helps in learning where information is located, making it easier for a user to
find what they want. Lastly, with standards and templates, information will not be accidentally omitted
from a document. Once Rob Davis has learned and reviewed your standards and templates, he will use
them. He will also recommend improvements and/or additions.

Q38. What are the different levels of testing?

A: Rob Davis has expertise in testing at all testing levels listed below. At each test level, he documents
the results. Each level of testing is either considered black or white box testing.

Q39. What is black box testing?

A: Black box testing is functional testing, not based on any knowledge of internal software design or
code. Black box testing are based on requirements and functionality.

Q40. What is white box testing?

8
A: White box testing is based on knowledge of the internal logic of an application's code. Tests are based
on coverage of code statements, branches, paths and conditions.

Q41. What is unit testing?

A: Unit testing is the first level of dynamic testing and is first the responsibility of developers and then
that of the test engineers. Unit testing is performed after the expected test results are met or differences
are explainable/acceptable.

Q42. What is parallel/audit testing?

A: Parallel/audit testing is testing where the user reconciles the output of the new system to the output
of the current system to verify the new system performs the operations correctly.

Q43. What is functional testing?

A: Functional testing is black-box type of testing geared to functional requirements of an application. Test
engineers *should* perform functional testing.

Q44. What is usability testing?

A: Usability testing is testing for 'user-friendliness'. Clearly this is subjective and depends on the targeted
end-user or customer. User interviews, surveys, video recording of user sessions and other techniques
can be used. Programmers and developers are usually not appropriate as usability testers.

Q45. What is incremental integration testing?

A: Incremental integration testing is continuous testing of an application as new functionality is
recommended. This may require that various aspects of an application's functionality are independent
enough to work separately, before all parts of the program are completed, or that test drivers are
developed as needed. This type of testing may be performed by programmers, software engineers, or
test engineers.

Q46. What is integration testing?

A: Upon completion of unit testing, integration testing begins. Integration testing is black box testing.
The purpose of integration testing is to ensure distinct components of the application still work in
accordance to customer requirements. Test cases are developed with the express purpose of exercising
the interfaces between the components. This activity is carried out by the test team.
Integration testing is considered complete, when actual results and expected results are either in line or
differences are explainable/acceptable based on client input.

Q47. What is system testing?

A: System testing is black box testing, performed by the Test Team, and at the start of the system
testing the complete system is configured in a controlled environment. The purpose of system testing is
to validate an application's accuracy and completeness in performing the functions as designed. System
testing simulates real life scenarios that occur in a "simulated real life" test environment and test all
functions of the system that are required in real life. System testing is deemed complete when actual
results and expected results are either in line or differences are explainable or acceptable, based on client
input.
Upon completion of integration testing, system testing is started. Before system testing, all unit and
integration test results are reviewed by Software QA to ensure all problems have been resolved. For a
higher level of testing it is important to understand unresolved problems that originate at unit and
integration test levels. You CAN learn system testing, with little or no outside help. Get CAN get free
information. Click on a link!

Q48. What is end-to-end testing?

9
A: Similar to system testing, the *macro* end of the test scale is testing a complete application in a
situation that mimics real world use, such as interacting with a database, using network communication,
or interacting with other hardware, application, or system.

Q49. What is regression testing?

A: The objective of regression testing is to ensure the software remains intact. A baseline set of data and
scripts is maintained and executed to verify changes introduced during the release have not "undone"
any previous code. Expected results from the baseline are compared to results of the software under test.
All discrepancies are highlighted and accounted for, before testing proceeds to the next level.

Q50. What is sanity testing?

A: Sanity testing is performed whenever cursory testing is sufficient to prove the application is
functioning according to specifications. This level of testing is a subset of regression testing. It normally
includes a set of core tests of basic GUI functionality to demonstrate connectivity to the database,
application servers, printers, etc.

Q51. What is performance testing?

A: Although performance testing is described as a part of system testing, it can be regarded as a distinct
level of testing. Performance testing verifies loads, volumes and response times, as defined by
requirements.

Q52. What is load testing?

A: Load testing is testing an application under heavy loads, such as the testing of a web site under a
range of loads to determine at what point the system response time will degrade or fail.

Q53. What is installation testing?

A: Installation testing is testing full, partial, upgrade, or install/uninstall processes. The installation test
for a release is conducted with the objective of demonstrating production readiness. This test includes
the inventory of configuration items, performed by the application's System Administration, the
evaluation of data readiness, and dynamic tests focused on basic system functionality. When necessary, a
sanity test is performed, following installation testing.

Q54. What is security/penetration testing?

A: Security/penetration testing is testing how well the system is protected against unauthorized internal
or external access, or willful damage. This type of testing usually requires sophisticated testing
techniques.

Q55. What is recovery/error testing?

A: Recovery/error testing is testing how well a system recovers from crashes, hardware failures, or other
catastrophic problems.

Q56. What is compatibility testing?

A: Compatibility testing is testing how well software performs in a particular hardware, software,
operating system, or network environment.

Q57. What is comparison testing?

A: Comparison testing is testing that compares software weaknesses and strengths to those of
competitors' products.

Q58. What is acceptance testing?

A: Acceptance testing is black box testing that gives the client/customer/project manager the opportunity
to verify the system functionality and usability prior to the system being released to production. The
acceptance test is the responsibility of the client/customer or project manager, however, it is conducted

10
with the full support of the project team. The test team also works with the client/customer/project
manager to develop the acceptance criteria.
Q59. What is alpha testing?
A: Alpha testing is testing of an application when development is nearing completion. Minor design
changes can still be made as a result of alpha testing. Alpha testing is typically performed by a group that
is independent of the design team, but still within the company, e.g. in-house software test engineers, or
software QA engineers.
Q60. What is beta testing?
A: Beta testing is testing an application when development and testing are essentially completed and final
bugs and problems need to be found before the final release. Beta testing is typically performed by end-
users or others, not programmers, software engineers, or test engineers.
Q47. What is system testing?
A: System testing is black box testing, performed by the Test Team, and at the start of the system
testing the complete system is configured in a controlled environment. The purpose of system testing is
to validate an application's accuracy and completeness in performing the functions as designed. System
testing simulates real life scenarios that occur in a "simulated real life" test environment and test all
functions of the system that are required in real life. System testing is deemed complete when actual
results and expected results are either in line or differences are explainable or acceptable, based on client
input.
Upon completion of integration testing, system testing is started. Before system testing, all unit and
integration test results are reviewed by Software QA to ensure all problems have been resolved. For a
higher level of testing it is important to understand unresolved problems that originate at unit and
integration test levels. You CAN learn system testing, with little or no outside help. Get CAN get free
information. Click on a link!
Q48. What is end-to-end testing?
A: Similar to system testing, the *macro* end of the test scale is testing a complete application in a
situation that mimics real world use, such as interacting with a database, using network communication,
or interacting with other hardware, application, or system.
Q49. What is regression testing?
A: The objective of regression testing is to ensure the software remains intact. A baseline set of data and
scripts is maintained and executed to verify changes introduced during the release have not "undone"
any previous code. Expected results from the baseline are compared to results of the software under test.
All discrepancies are highlighted and accounted for, before testing proceeds to the next level.
Q50. What is sanity testing?
A: Sanity testing is performed whenever cursory testing is sufficient to prove the application is
functioning according to specifications. This level of testing is a subset of regression testing. It normally
includes a set of core tests of basic GUI functionality to demonstrate connectivity to the database,
application servers, printers, etc.
Q51. What is performance testing?
A: Although performance testing is described as a part of system testing, it can be regarded as a distinct
level of testing. Performance testing verifies loads, volumes and response times, as defined by
requirements.
Q52. What is load testing?
A: Load testing is testing an application under heavy loads, such as the testing of a web site under a
range of loads to determine at what point the system response time will degrade or fail.
Q53. What is installation testing?
A: Installation testing is testing full, partial, upgrade, or install/uninstall processes. The installation test
for a release is conducted with the objective of demonstrating production readiness. This test includes
the inventory of configuration items, performed by the application's System Administration, the
evaluation of data readiness, and dynamic tests focused on basic system functionality. When necessary, a
sanity test is performed, following installation testing.
Q54. What is security/penetration testing?

11
A: Security/penetration testing is testing how well the system is protected against unauthorized internal
or external access, or willful damage. This type of testing usually requires sophisticated testing
techniques.
Q55. What is recovery/error testing?
A: Recovery/error testing is testing how well a system recovers from crashes, hardware failures, or other
catastrophic problems.
Q56. What is compatibility testing?
A: Compatibility testing is testing how well software performs in a particular hardware, software,
operating system, or network environment.
Q57. What is comparison testing?
A: Comparison testing is testing that compares software weaknesses and strengths to those of
competitors' products.
Q58. What is acceptance testing?
A: Acceptance testing is black box testing that gives the client/customer/project manager the opportunity
to verify the system functionality and usability prior to the system being released to production. The
acceptance test is the responsibility of the client/customer or project manager, however, it is conducted
with the full support of the project team. The test team also works with the client/customer/project
manager to develop the acceptance criteria.
Q59. What is alpha testing?
A: Alpha testing is testing of an application when development is nearing completion. Minor design
changes can still be made as a result of alpha testing. Alpha testing is typically performed by a group that
is independent of the design team, but still within the company, e.g. in-house software test engineers, or
software QA engineers.
Q60. What is beta testing?
A: Beta testing is testing an application when development and testing are essentially completed and final
bugs and problems need to be found before the final release. Beta testing is typically performed by end-
users or others, not programmers, software engineers, or test engineers.
Q47. What is system testing?
A: System testing is black box testing, performed by the Test Team, and at the start of the system
testing the complete system is configured in a controlled environment. The purpose of system testing is
to validate an application's accuracy and completeness in performing the functions as designed. System
testing simulates real life scenarios that occur in a "simulated real life" test environment and test all
functions of the system that are required in real life. System testing is deemed complete when actual
results and expected results are either in line or differences are explainable or acceptable, based on client
input.
Upon completion of integration testing, system testing is started. Before system testing, all unit and
integration test results are reviewed by Software QA to ensure all problems have been resolved. For a
higher level of testing it is important to understand unresolved problems that originate at unit and
integration test levels. You CAN learn system testing, with little or no outside help. Get CAN get free
information. Click on a link!
Q48. What is end-to-end testing?
A: Similar to system testing, the *macro* end of the test scale is testing a complete application in a
situation that mimics real world use, such as interacting with a database, using network communication,
or interacting with other hardware, application, or system.
Q49. What is regression testing?
A: The objective of regression testing is to ensure the software remains intact. A baseline set of data and
scripts is maintained and executed to verify changes introduced during the release have not "undone"
any previous code. Expected results from the baseline are compared to results of the software under test.
All discrepancies are highlighted and accounted for, before testing proceeds to the next level.
Q50. What is sanity testing?
A: Sanity testing is performed whenever cursory testing is sufficient to prove the application is
functioning according to specifications. This level of testing is a subset of regression testing. It normally

12
includes a set of core tests of basic GUI functionality to demonstrate connectivity to the database,
application servers, printers, etc.
Q51. What is performance testing?
A: Although performance testing is described as a part of system testing, it can be regarded as a distinct
level of testing. Performance testing verifies loads, volumes and response times, as defined by
requirements.
Q52. What is load testing?
A: Load testing is testing an application under heavy loads, such as the testing of a web site under a
range of loads to determine at what point the system response time will degrade or fail.
Q53. What is installation testing?
A: Installation testing is testing full, partial, upgrade, or install/uninstall processes. The installation test
for a release is conducted with the objective of demonstrating production readiness. This test includes
the inventory of configuration items, performed by the application's System Administration, the
evaluation of data readiness, and dynamic tests focused on basic system functionality. When necessary, a
sanity test is performed, following installation testing.
Q54. What is security/penetration testing?
A: Security/penetration testing is testing how well the system is protected against unauthorized internal
or external access, or willful damage. This type of testing usually requires sophisticated testing
techniques.
Q55. What is recovery/error testing?
A: Recovery/error testing is testing how well a system recovers from crashes, hardware failures, or other
catastrophic problems.
Q56. What is compatibility testing?
A: Compatibility testing is testing how well software performs in a particular hardware, software,
operating system, or network environment.
Q57. What is comparison testing?
A: Comparison testing is testing that compares software weaknesses and strengths to those of
competitors' products.
Q58. What is acceptance testing?
A: Acceptance testing is black box testing that gives the client/customer/project manager the opportunity
to verify the system functionality and usability prior to the system being released to production. The
acceptance test is the responsibility of the client/customer or project manager, however, it is conducted
with the full support of the project team. The test team also works with the client/customer/project
manager to develop the acceptance criteria.
Q59. What is alpha testing?
A: Alpha testing is testing of an application when development is nearing completion. Minor design
changes can still be made as a result of alpha testing. Alpha testing is typically performed by a group that
is independent of the design team, but still within the company, e.g. in-house software test engineers, or
software QA engineers.
Q60. What is beta testing?
A: Beta testing is testing an application when development and testing are essentially completed and final
bugs and problems need to be found before the final release. Beta testing is typically performed by end-
users or others, not programmers, software engineers, or test engineers.
Q61. What testing roles are standard on most testing projects?
A: Depending on the organization, the following roles are more or less standard on most testing projects:
Testers, Test Engineers, Test/QA Team Lead, Test/QA Manager, System Administrator, Database
Administrator, Technical Analyst, Test Build Manager and Test Configuration Manager. Depending on the
project, one person may wear more than one hat. For instance, Test Engineers may also wear the hat of
Technical Analyst, Test Build Manager and Test Configuration Manager. You CAN get a job in testing.
Click on a link!
Q62. What is a Test/QA Team Lead?
A: The Test/QA Team Lead coordinates the testing activity, communicates testing status to management
and manages the test team.

13
Q63. What is a Test Engineer?
A: Test Engineers are engineers who specialize in testing. We, test engineers, create test cases,
procedures, scripts and generate data. We execute test procedures and scripts, analyze standards of
measurements, evaluate results of system/integration/regression testing. We also...
Speed up the work of the development staff;
Reduce your organization's risk of legal liability;
Give you the evidence that your software is correct and operates properly;
Improve problem tracking and reporting;
Maximize the value of your software;
Maximize the value of the devices that use it;
Assure the successful launch of your product by discovering bugs and design flaws, before users get
discouraged, before shareholders loose their cool and before employees get bogged down;
Help the work of your development staff, so the development team can devote its time to build up your
product;
Promote continual improvement;
Provide documentation required by FDA, FAA, other regulatory agencies and your customers;
Save money by discovering defects 'early' in the design process, before failures occur in production, or in
the field;
Save the reputation of your company by discovering bugs and design flaws; before bugs and design flaws
damage the reputation of your company.
Q64. What is a Test Build Manager?
A: Test Build Managers deliver current software versions to the test environment, install the application's
software and apply software patches, to both the application and the operating system, set-up, maintain
and back up test environment hardware. Depending on the project, one person may wear more than one
hat. For instance, a Test Engineer may also wear the hat of a Test Build Manager.
Q65. What is a System Administrator?
A: Test Build Managers, System Administrators, Database Administrators deliver current software
versions to the test environment, install the application's software and apply software patches, to both
the application and the operating system, set-up, maintain and back up test environment hardware.
Depending on the project, one person may wear more than one hat. For instance, a Test Engineer may
also wear the hat of a System Administrator.
Q66. What is a Database Administrator?
A: Test Build Managers, System Administrators and Database Administrators deliver current software
versions to the test environment, install the application's software and apply software patches, to both
the application and the operating system, set-up, maintain and back up test environment hardware.
Depending on the project, one person may wear more than one hat. For instance, a Test Engineer may
also wear the hat of a Database Administrator.
Q67. What is a Technical Analyst?
A: Technical Analysts perform test assessments and validate system/functional test requirements.
Depending on the project, one person may wear more than one hat. For instance, Test Engineers may
also wear the hat of a Technical Analyst.
Q68. What is a Test Configuration Manager?
A: Test Configuration Managers maintain test environments, scripts, software and test data. Depending
on the project, one person may wear more than one hat. For instance, Test Engineers may also wear the
hat of a Test Configuration Manager.
Q69. What is a test schedule?
A: The test schedule is a schedule that identifies all tasks required for a successful testing effort, a
schedule of all test activities and resource requirements.
Q70. What is software testing methodology?
A: One software testing methodology is the use a three step process of...
Creating a test strategy;
Creating a test plan/design; and
Executing tests.

14
This methodology can be used and molded to your organization's needs. Rob Davis believes that using
this methodology is important in the development and in ongoing maintenance of his customers'
applications.
Q71. What is the general testing process?
A: The general testing process is the creation of a test strategy (which sometimes includes the creation
of test cases), creation of a test plan/design (which usually includes test cases and test procedures) and
the execution of tests.
Q72. How do you create a test strategy?
A: The test strategy is a formal description of how a software product will be tested. A test strategy is
developed for all levels of testing, as required. The test team analyzes the requirements, writes the test
strategy and reviews the plan with the project team. The test plan may include test cases, conditions, the
test environment, a list of related tasks, pass/fail criteria and risk assessment.
Inputs for this process:
A description of the required hardware and software components, including test tools. This information
comes from the test environment, including test tool data.
A description of roles and responsibilities of the resources required for the test and schedule constraints.
This information comes from man-hours and schedules.
Testing methodology. This is based on known standards.
Functional and technical requirements of the application. This information comes from requirements,
change request, technical and functional design documents.
Requirements that the system can not provide, e.g. system limitations.
Outputs for this process:
An approved and signed off test strategy document, test plan, including test cases.
Testing issues requiring resolution. Usually this requires additional negotiation at the project management
level.
Q73. How do you create a test plan/design?
A: Test scenarios and/or cases are prepared by reviewing functional requirements of the release and
preparing logical groups of functions that can be further broken into test procedures. Test procedures
define test conditions, data to be used for testing and expected results, including database updates, file
outputs, report results. Generally speaking...
Test cases and scenarios are designed to represent both typical and unusual situations that may occur in
the application.
Test engineers define unit test requirements and unit test cases. Test engineers also execute unit test
cases.
It is the test team that, with assistance of developers and clients, develops test cases and scenarios for
integration and system testing.
Test scenarios are executed through the use of test procedures or scripts.
Test procedures or scripts define a series of steps necessary to perform one or more test scenarios.
Test procedures or scripts include the specific data that will be used for testing the process or
transaction.
Test procedures or scripts may cover multiple test scenarios.
Test scripts are mapped back to the requirements and traceability matrices are used to ensure each test
is within scope.
Test data is captured and base lined, prior to testing. This data serves as the foundation for unit and
system testing and used to exercise system functionality in a controlled environment.
Some output data is also base-lined for future comparison. Base-lined data is used to support future
application maintenance via regression testing.
A pretest meeting is held to assess the readiness of the application and the environment and data to be
tested. A test readiness document is created to indicate the status of the entrance criteria of the release.
Inputs for this process:
Approved Test Strategy Document.
Test tools, or automated test tools, if applicable.
Previously developed scripts, if applicable.

15
Test documentation problems uncovered as a result of testing.
A good understanding of software complexity and module path coverage, derived from general and
detailed design documents, e.g. software design document, source code and software complexity data.
Outputs for this process:
Approved documents of test scenarios, test cases, test conditions and test data.
Reports of software design issues, given to software developers for correction.
Q74. How do you execute tests?
A: Execution of tests is completed by following the test documents in a methodical manner. As each test
procedure is performed, an entry is recorded in a test execution log to note the execution of the
procedure and whether or not the test procedure uncovered any defects. Checkpoint meetings are held
throughout the execution phase. Checkpoint meetings are held daily, if required, to address and discuss
testing issues, status and activities.
The output from the execution of test procedures is known as test results. Test results are evaluated by
test engineers to determine whether the expected results have been obtained. All
discrepancies/anomalies are logged and discussed with the software team lead, hardware test lead,
programmers, software engineers and documented for further investigation and resolution. Every
company has a different process for logging and reporting bugs/defects uncovered during testing.
A pass/fail criteria is used to determine the severity of a problem, and results are recorded in a test
summary report. The severity of a problem, found during system testing, is defined in accordance to the
customer's risk assessment and recorded in their selected tracking tool.
Proposed fixes are delivered to the testing environment, based on the severity of the problem. Fixes are
regression tested and flawless fixes are migrated to a new baseline. Following completion of the test,
members of the test team prepare a summary report. The summary report is reviewed by the Project
Manager, Software QA Manager and/or Test Team Lead.
After a particular level of testing has been certified, it is the responsibility of the Configuration Manager to
coordinate the migration of the release software components to the next test level, as documented in the
Configuration Management Plan. The software is only migrated to the production environment after the
Project Manager's formal acceptance.
The test team reviews test document problems identified during testing, and update documents where
appropriate.
Inputs for this process:
Approved test documents, e.g. Test Plan, Test Cases, Test Procedures.
Test tools, including automated test tools, if applicable.
Developed scripts.
Changes to the design, i.e. Change Request Documents.
Test data.
Availability of the test team and project team.
General and Detailed Design Documents, i.e. Requirements Document, Software Design Document.
A software that has been migrated to the test environment, i.e. unit tested code, via the
Configuration/Build Manager.
Test Readiness Document.
Document Updates.
Outputs for this process:
Log and summary of the test results. Usually this is part of the Test Report. This needs to be approved
and signed-off with revised testing deliverables.
Changes to the code, also known as test fixes.
Test document problems uncovered as a result of testing. Examples are Requirements document and
Design Document problems.
Reports on software design issues, given to software developers for correction. Examples are bug reports
on code issues.
Formal record of test incidents, usually part of problem tracking.
Base-lined package, also known as tested source and object code, ready for migration to the next level.
Q75. What testing approaches can you tell me about?

16
A: Each of the followings represents a different testing approach:
Black box testing,
White box testing,
Unit testing,
Incremental testing,
Integration testing,
Functional testing,
System testing,
End-to-end testing,
Sanity testing,
Regression testing,
Acceptance testing,
Load testing,
Performance testing,
Usability testing,
Install/uninstall testing,
Recovery testing,
Security testing,
Compatibility testing,
Exploratory testing, ad-hoc testing,
User acceptance testing,
Comparison testing,
Alpha testing,
Beta testing, and
Mutation testing.
Q76. What is stress testing?
A: Stress testing is testing that investigates the behavior of software (and hardware) under extraordinary
operating conditions. For example, when a web server is stress tested, testing aims to find out how many
users can be on-line, at the same time, without crashing the server. Stress testing tests the stability of a
given system or entity. It tests something beyond its normal operational capacity, in order to observe any
negative results. For example, a web server is stress tested, using scripts, bots, and various denial of
service tools.
Q77. What is load testing?
A: Load testing simulates the expected usage of a software program, by simulating multiple users that
access the program's services concurrently. Load testing is most useful and most relevant for multi-user
systems, client/server models, including web servers. For example, the load placed on the system is
increased above normal usage patterns, in order to test the system's response at peak loads. You CAN
learn load testing, with little or no outside help. Get CAN get free information. Click on a link!
Q79. What is the difference between performance testing and load testing?
A: Load testing is a blanket term that is used in many different ways across the professional software
testing community. The term, load testing, is often used synonymously with stress testing, performance
testing, reliability testing, and volume testing. Load testing generally stops short of stress testing. During
stress testing, the load is so great that errors are the expected results, though there is gray area in
between stress testing and load testing. You CAN learn testing, with little or no outside help. Get CAN get
free information. Click on a link!
Q80. What is the difference between reliability testing and load testing?
A: Load testing is a blanket term that is used in many different ways across the professional software
testing community. The term, load testing, is often used synonymously with stress testing, performance
testing, reliability testing, and volume testing. Load testing generally stops short of stress testing. During
stress testing, the load is so great that errors are the expected results, though there is gray area in
between stress testing and load testing.
Q81. What is the difference between volume testing and load testing?

17
A: Load testing is a blanket term that is used in many different ways across the professional software
testing community. The term, load testing, is often used synonymously with stress testing, performance
testing, reliability testing, and volume testing. Load testing generally stops short of stress testing. During
stress testing, the load is so great that errors are the expected results, though there is gray area in
between stress testing and load testing.
Q82. What is incremental testing?
A: Incremental testing is partial testing of an incomplete product. The goal of incremental testing is to
provide an early feedback to software developers.
Q83. What is software testing?
A: Software testing is a process that identifies the correctness, completenes, and quality of software.
Actually, testing cannot establish the correctness of software. It can find defects, but cannot prove there
are no defects. You CAN learn software testing, with little or no outside help. Get CAN get free
information. Click on a link!
Q84. What is automated testing?
A: Automated testing is a formally specified and controlled method of formal testing approach.
Q85. What is alpha testing?
A: Alpha testing is final testing before the software is released to the general public. First, (and this is
called the first phase of alpha testing), the software is tested by in-house developers. They use either
debugger software, or hardware-assisted debuggers. The goal is to catch bugs quickly. Then, (and this is
called second stage of alpha testing), the software is handed over to us, the software QA staff, for
additional testing in an environment that is similar to the intended use.
Q86. What is beta testing?
A: Following alpha testing, "beta versions" of the software are released to a group of people, and limited
public tests are performed, so that further testing can ensure the product has few bugs. Other times,
beta versions are made available to the general public, in order to receive as much feedback as possible.
The goal is to benefit the maximum number of future users.
Q87. What is the difference between alpha and beta testing?
A: Alpha testing is performed by in-house developers and software QA personnel. Beta testing is
performed by the public, a few select prospective customers, or the general public
Q88. What is clear box testing?
A: Clear box testing is the same as white box testing. It is a testing approach that examines the
application's program structure, and derives test cases from the application's program logic. You CAN
learn clear box testing, with little or no outside help. Get CAN get free information. Click on a link!
Q89. What is boundary value analysis?
A: Boundary value analysis is a technique for test data selection. A test engineer chooses values that lie
along data extremes. Boundary values include maximum, minimum, just inside boundaries, just outside
boundaries, typical values, and error values. The expectation is that, if a systems works correctly for
these extreme or special values, then it will work correctly for all values in between. An effective way to
test code, is to exercise it at its natural boundaries.
Q90. What is ad hoc testing?
A: Ad hoc testing is a testing approach; it is the least formal testing approach.
Q91. What is gamma testing?
A: Gamma testing is testing of software that has all the required features, but it did not go through all
the in-house quality checks. Cynics tend to refer to software releases as "gamma testing".
Q92. What is glass box testing?
A: Glass box testing is the same as white box testing. It is a testing approach that examines the
application's program structure, and derives test cases from the application's program logic.
Q93. What is open box testing?
A: Open box testing is same as white box testing. It is a testing approach that examines the application's
program structure, and derives test cases from the application's program logic.
Q94. What is black box testing?

18
A: Black box testing a type of testing that considers only externally visible behavior. Black box testing
considers neither the code itself, nor the "inner workings" of the software. You CAN learn to do black box
testing, with little or no outside help. Get CAN get free information. Click on a link!
Q95. What is functional testing?
A: Functional testing is same as black box testing. Black box testing a type of testing that considers only
externally visible behavior. Black box testing considers neither the code itself, nor the "inner workings" of
the software.
Q96. What is closed box testing?
A: Closed box testing is same as black box testing. Black box testing a type of testing that considers only
externally visible behavior. Black box testing considers neither the code itself, nor the "inner workings" of
the software.
Q97. What is bottom-up testing?
A: Bottom-up testing is a technique for integration testing. A test engineer creates and uses test drivers
for components that have not yet been developed, because, with bottom-up testing, low-level
components are tested first. The objective of bottom-up testing is to call low-level components first, for
testing
purposes.
Q98. What is software quality?
A: The quality of the software does vary widely from system to system. Some common quality attributes
are stability, usability, reliability, portability, and maintainability. See quality standard ISO 9126 for more
information on this subject.
Q99. How do test case templates look like?
A: Software test cases are in a document that describes inputs, actions, or events, and their expected
results, in order to determine if all features of an application are working correctly. Test case templates
contain all particulars of every test case. Often these templates are in the form of a table. One example
of this table is a 6-column table, where column 1 is the "Test Case ID Number", column 2 is the "Test
Case Name", column 3 is the "Test Objective", column 4 is the "Test Conditions/Setup", column 5 is the
"Input Data Requirements/Steps", and column 6 is the "Expected Results". All documents should be
written to a certain standard and template. Standards and templates maintain document uniformity. They
also help in learning where information is located, making it easier for users to find what they want.
Lastly, with standards and templates, information will not be accidentally omitted from a document. You
CAN learn to create test case templates, with little or no outside help. Get CAN get free information. Click
on a link!
Q100. What is a software fault?
A: Software faults are hidden programming errors. Software faults are errors in the correctness of the
semantics of computer programs.
Q101. What is software failure?
A: Software failure occurs when the software does not do what the user expects to see.
Q102. What is the difference between a software fault and a software failure?
A: Software failure occurs when the software does not do what the user expects to see. A software fault,
on the other hand, is a hidden programming error. A software fault becomes a software failure only when
the exact computation conditions are met, and the faulty portion of the code is executed on the CPU.
This can occur during normal usage. Or, when the software is ported to a different hardware platform.
Or, when the software is ported to a different complier. Or, when the software gets extended.
Q103. What is a test engineer?
A: Test engineers are engineers who specialize in testing. We, test engineers, create test cases,
procedures, scripts and generate data. We execute test procedures and scripts, analyze standards of
measurements, evaluate results of system/integration/regression testing.
Q104. What is the role of test engineers?
A: Test engineers speed up the work of the development staff, and reduce the risk of your company's
legal liability. We, test engineers, also give the company the evidence that the software is correct and
operates properly. We also improve problem tracking and reporting, maximize the value of the software,
and the value of the devices that use it. We also assure the successful launch of the product by

19
discovering bugs and design flaws, before users get discouraged, before shareholders loose their cool
and before employees get bogged down. We, test engineers help the work of software development
staff, so the development team can devote its time to build up the product. We, test engineers also
promote continual improvement. They provide documentation required by FDA, FAA, other regulatory
agencies, and your customers. We, test engineers save your company money by discovering defects
EARLY in the design process, before failures occur in production, or in the field. We save the reputation
of your company by discovering bugs and design flaws, before bugs and design flaws damage the
reputation of your company.
Q105. What is a QA engineer?
A: QA engineers are test engineers, but QA engineers do more than just testing. Good QA engineers
understand the entire software development process and how it fits into the business approach and the
goals of the organization. Communication skills and the ability to understand various sides of issues are
important. We, QA engineers, are successful if people listen to us, if people use our tests, if people think
that we're useful, and if we're happy doing our work. I would love to see QA departments staffed with
experienced software developers who coach development teams to write better code. But I've never seen
it. Instead of coaching, we, QA engineers, tend to be process people.
Q106. What metrics are used for bug tracking?
A: Metrics that can be used for bug tracking include: total number of bugs, total number of bugs that
have been fixed, number of new bugs per week, and number of fixes per week. Metrics for bug tracking
can be used to determine when to stop testing, e.g. when bug rate falls below a certain level. You CAN
learn to use defect tracking software, with little or no outside help.
Q107. What is role of the QA engineer?
A: The QA Engineer's function is to use the system much like real users would, find all the bugs, find
ways to replicate the bugs, submit bug reports to the developers, and to provide feedback to the
developers, i.e. tell them if they've achieved the desired level of quality.
Q108. What are the responsibilities of a QA engineer?
A: Let's say, an engineer is hired for a small software company's QA role, and there is no QA team.
Should he take responsibility to set up a QA infrastructure/process, testing and quality of the entire
product? No, because taking this responsibility is a classic trap that QA people get caught in. Why?
Because we QA engineers cannot assure quality. And because QA departments cannot create quality.
What we CAN do is to detect lack of quality, and prevent low-quality products from going out the door.
What is the solution? We need to drop the QA label, and tell the developers, they are responsible for the
quality of their own work. The problem is, sometimes, as soon as the developers learn that there is a test
department, they will slack off on their testing. We need to offer to help with quality assessment only.
Q109. What metrics can be used in software development?
A: Metrics refer to statistical process control. The idea of statistical process control is a great one, but it
has only a limited use in software development. On the negative side, statistical process control works
only with processes that are sufficiently well defined AND unvaried, so that they can be analyzed in terms
of statistics. The problem is, most software development projects are NOT sufficiently well defined and
NOT sufficiently unvaried. On the positive side, one CAN use statistics. Statistics are excellent tools that
project managers can use. Statistics can be used, for example, to determine when to stop testing, i.e.
test cases completed with certain percentage passed, or when bug rate falls below a certain level. But, if
these are project management tools, why should we label them quality assurance tools?
Q110. How do you perform integration testing?
A: First, unit testing has to be completed. Upon completion of unit testing, integration testing begins.
Integration testing is black box testing. The purpose of integration testing is to ensure distinct
components of the application still work in accordance to customer requirements. Test cases are
developed with the express purpose of exercising the interfaces between the components. This activity is
carried out by the test team. Integration testing is considered complete, when actual results and
expected results are either in line or differences are explainable/acceptable based on client input.
Q111. What is integration testing?
A: Integration testing is black box testing. The purpose of integration testing is to ensure distinct
components of the application still work in accordance to customer requirements. Test cases are

20
developed with the express purpose of exercising the interfaces between the components. This activity is
carried out by the test team. Integration testing is considered complete, when actual results and
expected results are either in line or differences are explainable/acceptable based on client input.
Q112. What metrics are used for test report generation?
A: Metrics refer to statistical process control. The idea of statistical process control is a great one, but it
has only a limited use in software development.
On the negative side, statistical process control works only with processes that are sufficiently well
defined AND unvaried, so that they can be analyzed in terms of statistics. The problem is, most software
development projects are NOT sufficiently well defined and NOT sufficiently unvaried.
On the positive side, one CAN use statistics. Statistics are excellent tools that project managers can use.
Statistics can be used, for example, to determine when to stop testing, i.e. test cases completed with
certain percentage passed, or when bug rate falls below a certain level. But, if these are project
management tools, why should we label them quality assurance tools?
The followings describe some of the metrics in quality assurance:
McCabe Metrics
Cyclomatic Complexity Metric (v(G)). Cyclomatic Complexity is a measure of the complexity of a module's
decision structure. It's the number of linearly independent paths and therefore, the minimum number of
paths that should be tested.
Actual Complexity Metric (AC). Actual Complexity is the number of independent paths traversed during
testing.
Module Design Complexity Metric (iv(G)). Module Design Complexity is the complexity of the design-
reduced module, and reflects the complexity of the module's calling patterns to its immediate subordinate
modules. This metric differentiates between modules that seriously complicate the design of a program
they are part of, and modules that simply contain complex computational logic. It is the basis upon which
program design and integration complexities (S0 and S1) are calculated.
Essential Complexity Metric (ev(G)). Essential Complexity is a measure of the degree to which a module
contains unstructured constructs. This metric measures the degree of structuredness and the quality of
the code. This metric is used to predict the required maintenance effort and to help in the modularization
process.
Pathological Complexity Metric (pv(G)). Pathological Complexity Metric is a measure of the degree to
which a module contains extremely unstructured constructs.
Design Complexity Metric (S0). Design Complexity Metric measures the amount of interaction between
modules in a system.
Integration Complexity Metric (S1). Integration Complexity Metric measures the amount of integration
testing necessary to guard against errors.
Object Integration Complexity Metric (OS1). Object Integration Complexity Metric quantifies the number
of tests necessary to fully integrate an object or class into an OO system.
Global Data Complexity Metric (gdv(G)). Global Data Complexity Metric quantifies the cyclomatic
complexity of a module's structure as it relates to global/parameter data. It can be no less than one and
no more than the cyclomatic complexity of the original flowgraph.
McCabe Data-Related Software Metrics
Data Complexity Metric (DV). Data Complexity Metric quantifies the complexity of a module's structure as
it relates to data-related variables. It is the number of independent paths through data logic, and
therefore, a measure of the testing effort with respect to data-related variables.
Tested Data Complexity Metric (TDV). Tested Data Complexity Metric quantifies the complexity of a
module's structure as it relates to data-related variables. It is the number of independent paths through
data logic that have been tested.
Data Reference Metric (DR). Data Reference Metric measures references to data-related variables
independently of control flow. It is the total number of times that data-related variables are used in a
module.
Tested Data Reference Metric (TDR). Tested Data Reference Metric is the total number of tested
references to data-related variables.

21
Maintenance Severity Metric (maint_severity). Maintenance Severity Metric measures how difficult it is to
maintain a module.
Data Reference Severity Metric (DR_severity). Data Reference Severity Metric measures the level of data
intensity within a module. It is an indicator of high levels of data related code; therefore, a module is
data intense if it contains a large number of data-related variables.
Data Complexity Severity Metric (DV_severity). Data Complexity Severity Metric measures the level of
data density within a module. It is an indicator of high levels of data logic in test paths, therefore, a
module is data dense if it contains data-related variables in a large proportion of its structures.
Global Data Severity Metric (gdv_severity). Global Data Severity Metric measures the potential impact of
testing data-related basis paths across modules. It is based on global data test paths.
McCabe Object-Oriented Software Metrics; Encapsulation
Percent Public Data (PCTPUB). PCTPUB is the percentage of public and proteced data within a class.
Access to Public Data (PUBDATA) PUBDATA indicates the number of accesses to public and protected
data.
McCabe Object-Oriented Software Metrics; Polymorphism
Percent of Unoverloaded Calls (PCTCALL). PCTCALL is the number of non-overloaded calls in a system.
Number of Roots (ROOTCNT). ROOTCNT is the total number of class hierarchy roots within a program.
Fan-in (FANIN). FANIN is the number of classes from which a class is derived.
McCabe Object-Oriented Software Metrics; Quality
Maximum v(G) (MAXV). MAXV is the maximum cyclomatic complexity value for any single method within
a class.
Maximum ev(G) (MAXEV). MAXEV is the maximum essential complexity value for any single method
within a class.
Hierarchy Quality(QUAL). QUAL counts the number of classes within a system that are dependent upon
their descendants.
Other Object-Oriented Software Metrics
Depth (DEPTH). Depth indicates at what level a class is located within its class hierarchy.
Lack of Cohesion of Methods (LOCM). LOCM is a measure of how the methods of a class interact with the
data in a class.
Number of Children (NOC). NOC is the number of classes that are derived directly from a specified class.
Response For a Class (RFC). RFC is a count of methods implemented within a class plus the number of
methods accessible to an object of this class type due to inheritance.
Weighted Methods Per Class (WMC). WMC is a count of methods implemented within a class.
Halstead Software Metrics
Program Length. Program length is the total number of operator occurences and the total number of
operand occurences.
Program Volume. Program volume is the minimum number of bits required for coding the program.
Program Level and Program Difficulty. Program level and program difficulty is a measure of how easily a
program is comprehended.
Intelligent Content. Intelligent content shows the complexity of a given algorithm independent of the
language used to express the algorithm.
Programming Effort. Programming effort is the estimated mental effort required to develop a program.
Error Estimate. Error estimate calculates the number of errors in a program.
Programming Time. Programming time is the estimated amount of time to implement an algorithm.
Line Count Software Metrics
Lines of Code
Lines of Comment
Lines of Mixed Code and Comments
Lines Left Blank
Q113. How do test plan templates look like?
A: The test plan document template helps to generate test plan documents that describe the objectives,
scope, approach and focus of a software testing effort. Test document templates are often in the form of
documents that are divided into sections and subsections. One example of this template is a 4-section

22
document, where section 1 is the description of the "Test Objective", section 2 is the the description of
"Scope of Testing", section 3 is the the description of the "Test Approach", and section 4 is the "Focus of
the Testing Effort". All documents should be written to a certain standard and template. Standards and
templates maintain document uniformity. They also help in learning where information is located, making
it easier for a user to find what they want. With standards and templates, information will not be
accidentally omitted from a document. Once Rob Davis has learned and reviewed your standards and
templates, he will use them. He will also recommend improvements and/or additions. A software project
test plan is a document that describes the objectives, scope, approach and focus of a software testing
effort. The process of preparing a test plan is a useful way to think through the efforts needed to validate
the acceptability of a software product. The completed document will help people outside the test group
understand the why and how of product validation.
Q114. What is a "bug life cycle"?
A: Bug life cycles are similar to software development life cycles. At any time during the software
development life cycle errors can be made during the gathering of requirements, requirements analysis,
functional design, internal design, documentation planning, document preparation, coding, unit testing,
test planning, integration, testing, maintenance, updates, re-testing and phase-out. Bug life cycle begins
when a programmer, software developer, or architect makes a mistake, creates an unintentional software
defect, i.e. a bug, and ends when the bug is fixed, and the bug is no longer in existence. What should be
done after a bug is found? When a bug is found, it needs to be communicated and assigned to
developers that can fix it. After the problem is resolved, fixes should be re-tested. Additionally,
determinations should be made regarding requirements, software, hardware, safety impact, etc., for
regression testing to check the fixes didn't create other problems elsewhere. If a problem-tracking system
is in place, it should encapsulate these determinations. A variety of commercial,
problem-tracking/management software tools are available. These tools, with the detailed input of
software test engineers, will give the team complete information so developers can understand the bug,
get an idea of its severity, reproduce it and fix it.
Q115. When do you choose automated testing?
A: For larger projects, or ongoing long-term projects, automated testing can be valuable. But for small
projects, the time needed to learn and implement the automated testing tools is usually not worthwhile.
Automated testing tools sometimes do not make testing easier. One problem with automated testing
tools is that if there are continual changes to the product being tested, the recordings have to be
changed so often, that it becomes a very time-consuming task to continuously update the scripts.
Another problem with such tools is the interpretation of the results (screens, data, logs, etc.) that can be
a time-consuming task.
Q116. What is the ratio of developers and testers?
A: This ratio is not a fixed one, but depends on what phase of the software development life cycle the
project is in. When a product is first conceived, organized, and developed, this ratio tends to be 10:1,
5:1, or 3:1, i.e. heavily in favor of developers. In sharp contrast, when the product is near the end of the
software development life cycle, this ratio tends to be 1:1, or even 1:2, in favor of testers.
Q117. What is your role in your current organization?
A: I'm a Software QA Engineer. I use the system much like real users would. I find all the bugs, find ways
to replicate the bugs, submit bug reports to developers, and provides feedback to the developers, i.e. tell
them if they've achieved the desired level of quality.
Q118. Should I take a course in manual testing?
A: Learning how to perform manual testing is an important part of one's education. I see no reason why
one should skip an important part of an academic program.
Q119. How can I learn to use WinRunner, without any outside help?
A: I suggest you read all you can, and that includes reading product description pamphlets, manuals,
books, information on the Internet, and whatever information you can lay your hands on. Then the next
step is getting some hands-on experience on how to use WinRunner. If there is a will, there is a way!
You CAN do it, if you put your mind to it! You CAN learn to use WinRunner, with little or no outside help.
Get CAN get free information. Click on a link!

23
Q120. To learn to use WinRunner, should I sign up for a course at a nearby educational
institution?
A: The cheapest, or free, education is sometimes provided on the job, by an employer, while one is
getting paid to do a job that requires the use of WinRunner and many other software testing tools. In lieu
of a job, it is often a good idea to sign up for courses at nearby educational institutions. Classroom
education, especially non-degree courses in local, community colleges, tends to be cheap.
Q121. I don't have a lot of money. How can I become a good tester with little or no cost to
me?
A: The cheapest, or free, education is sometimes provided on the job, by an employer, while one is
getting paid to do a job that requires the use of WinRunner and many other software testing tools.
Q122. What software tools are in demand these days?
A: The software tools currently in demand include LabView, LoadRunner, Rational Tools, and Winrunner
-- and especially the Loadrunner and Rational Toolset -- but there are many others, depending on the
end client, and their needs, and preferences.
Q123. Which of these tools should I learn?
A: I suggest you learn the most popular software tools (i.e. LabView, LoadRunner, Rational Tools,
Winrunner, etc.) -- and you want to pay special attention to LoadRunner and the Rational Toolset.
Q124. What are some of the software configuration management tools?
A: Software configuration management tools include Rational ClearCase, DOORS, PVCS, CVS; and there
are many others. Rational ClearCase is a popular software tool, made by Rational Software, for revision
control of source code. DOORS, or "Dynamic Object Oriented Requirements System", is a requirements
version control software tool. CVS, or "Concurrent Version System", is a popular, open source version
control system to keep track of changes in documents associated with software projects. CVS enables
several, often distant, developers to work together on the same source code. PVCS is a document version
control tool, a competitor of SCCS. SCCS is an original UNIX program, based on "diff". Diff is a UNIX
command that compares contents of two files.
Q125. What is software configuration management?
A: Software Configuration management (SCM) is the control, and the recording of, changes that are
made to the software and documentation throughout the software development life cycle (SDLC). SCM
covers the tools and processes used to control, coordinate and track code, requirements, documentation,
problems, change requests, designs, tools, compilers, libraries, patches, and changes made to them, and
to keep track of who makes the changes. Rob Davis has experience with a full range of CM tools and
concepts, and can easily adapt to an organization's software tool and process needs.
Q126. What other roles are in testing?
A: Depending on the organization, the following roles are more or less standard on most testing projects:
Testers, Test Engineers, Test/QA Team Leads, Test/QA Managers, System Administrators, Database
Administrators, Technical Analysts, Test Build Managers, and Test Configuration Managers. Depending on
the project, one person can and often wear more than one hat. For instance, we Test Engineers often
wear the hat of Technical Analyst, Test Build Manager and Test Configuration Manager as well.
Q127. Which of these roles are the best and most popular?
A: As a yardstick of popularity, if we count the number of applicants and resumes, Tester roles tend to be
the most popular. Less popular roles are roles of System Administrators, Test/QA Team Leads, and
Test/QA Managers. The "best" job is the job that makes YOU happy. The best job is the one that works
for YOU, using the skills, resources, and talents YOU have. To find the best job, you need to experiment,
and "play" different roles. Persistence, combined with experimentation, will lead to success.
Q128. What's the difference between priority and severity?
A: "Priority" is associated with scheduling, and "severity" is associated with standards. "Piority" means
something is afforded or deserves prior attention; a precedence established by order of importance (or
urgency). "Severity" is the state or quality of being severe; severe implies adherence to rigorous
standards or high principles and often suggests harshness; severe is marked by or requires strict
adherence to rigorous standards or high principles, e.g. a severe code of behavior. The words priority and
severity do come up in bug tracking. A variety of commercial, problem-tracking/management software
tools are available. These tools, with the detailed input of software test engineers, give the team

24
complete information so developers can understand the bug, get an idea of its 'severity', reproduce it and
fix it. The fixes are based on project 'priorities' and 'severity' of bugs. The 'severity' of a problem is
defined in accordance to the customer's risk assessment and recorded in their selected tracking tool. A
buggy software can 'severely' affect schedules, which, in turn can lead to a reassessment and
renegotiation of 'priorities'.
Q129. What's the difference between efficient and effective?
A: "Efficient" means having a high ratio of output to input; working or producing with a minimum of
waste. For example, "An efficient engine saves gas". "Effective", on the other hand, means producing, or
capable of producing, an intended result, or having a striking effect. For example, "For rapid long-
distance transportation, the jet engine is more effective than a witch's broomstick".
Q130. What is the difference between verification and validation?
A: Verification takes place before validation, and not vice versa. Verification evaluates documents, plans,
code, requirements, and specifications. Validation, on the other hand, evaluates the product itself. The
inputs of verification are checklists, issues lists, walkthroughs and inspection meetings, reviews and
meetings. The input of validation, on the other hand, is the actual testing of an actual product. The
output of verification is a nearly perfect set of documents, plans, specifications, and requirements
document. The output of validation, on the other hand, is a nearly perfect, actual product.
Q131. What is documentation change management?
A: Documentation change management is part of configuration management (CM). CM covers the tools
and processes used to control, coordinate and track code, requirements, documentation, problems,
change requests, designs, tools, compilers, libraries, patches, changes made to them and who makes the
changes. Rob Davis has had experience with a full range of CM tools and concepts. Rob Davis can easily
adapt to your software tool and process needs.
Q132. What is up time?
A: Up time is the time period when a system is operational and in service. Up time is the sum of busy
time and idle time.
Q133. What is upwardly compatible software?
A: Upwardly compatible software is compatible with a later or more complex version of itself. For
example, an upwardly compatible software is able to handle files created by a later version of itself.
Q134. What is upward compression?
A: In software design, upward compression means a form of demodularization, in which a subordinate
module is copied into the body of a superior module.
Q135. What is usability?
A: Usability means ease of use; the ease with which a user can learn to operate, prepare inputs for, and
interpret outputs of a software product.
Q136. What is user documentation?
A: User documentation is a document that describes the way a software product or system should be
used to obtain the desired results.
Q137. What is a user manual?
A: User manual is a document that presents information necessary to employ software or a system to
obtain the desired results. Typically, what is described are system and component capabilities, limitations,
options, permitted inputs, expected outputs, error messages, and special instructions.
Q138. What is the difference between user documentation and user manual?
A: When a distinction is made between those who operate and use a computer system for its intended
purpose, a separate user documentation and user manual is created. Operators get user documentation,
and users get user manuals.
Q139. What is user friendly software?
A: A computer program is user friendly, when it is designed with ease of use, as one of the primary
objectives of its design.
Q140. What is a user friendly document?
A: A document is user friendly, when it is designed with ease of use, as one of the primary objectives of
its design.
Q141. What is a user guide?

25
A: User guide is the same as the user manual. It is a document that presents information necessary to
employ a system or component to obtain the desired results. Typically, what is described are system and
component capabilities, limitations, options, permitted inputs, expected outputs, error messages, and
special instructions.
Q142. What is user interface?
A: User interface is the interface between a human user and a computer system. It enables the passage
of information between a human user and hardware or software components of a computer system.
Q143. What is a utility?
A: Utility is a software tool designed to perform some frequently used support function. For example, a
program to print files.
Q144. What is utilization?
A: Utilization is the ratio of time a system is busy, divided by the time it is available. Uilization is a useful
measure in evaluating computer performance.
Q145. What is V&V?
A: V&V is an acronym for verification and validation.
Q146. What is variable trace?
A: Variable trace is a record of the names and values of variables accessed and changed during the
execution of a computer program.
Q147. What is value trace?
A: Value trace is same as variable trace. It is a record of the names and values of variables accessed and
changed during the execution of a computer program.
Q148. What is a variable?
A: Variables are data items whose values can change. For example: "capacitor_voltage". There are local
and global variables, and constants.
Q149. What is a variant?
A: Variants are versions of a program. Variants result from the application of software diversity.
Q150. What is verification and validation (V&V)?
A: Verification and validation (V&V) is a process that helps to determine if the software requirements are
complete, correct; and if the software of each development phase fulfills the requirements and conditions
imposed by the previos phase; and if the final software complies with the applicable software
requirements.
Q151. What is a software version?
A: A software version is an initial release (or re-release) of a software associated with a complete
compilation (or recompilation) of the software.
Q152. What is a document version?
A: A document version is an initial release (or complete a re-release) of a document, as opposed to a
revision resulting from issuing change pages to a previous release.
Q153. What is VDD?
A: VDD is an acronym. It stands for "version description document".
Q154. What is a version description document (VDD)?
A: Version description document (VDD) is a document that accompanies and identifies a given version of
a software product. Typically the VDD includes a description, and identification of the software,
identification of changes incorporated into this version, and installation and operating information unique
to this version of the software.
Q155. What is a vertical microinstruction?
A: A vertical microinstruction is a microinstruction that specifies one of a sequence of operations needed
to carry out a machine language instruction. Vertical microinstructions are short, 12 to 24 bit instructions.
They're called vertical because they are normally listed vertically on a page. These 12 to 24 bit
microinstructions instructions are required to carry out a single machine language instruction. Besides
vertical microinstructions, there are horizontal as well as diagonal microinstructions as well.
Q156. What is a virtual address?
A: In virtual storage systems, virtual addresses are assigned to auxiliary storage locations. They allow
those location to be accessed as though they were part of the main storage.

26
Q157. What is virtual memory?
A: Virtual memory relates to virtual storage. In virtual storage, portions of a user's program and data are
placed in auxiliary storage, and the operating system automatically swaps them in and out of main
storage as needed.
Q158. What is virtual storage?
A: Virtual storage is a storage allocation technique, in which auxiliary storage can be addressed as though
it was part of main storage. Portions of a user's program and data are placed in auxiliary storage, and the
operating system automatically swaps them in and out of main storage as needed.
Q159. What is a waiver?
A: Waivers are authorizations to accept software that has been submitted for inspection, found to depart
from specified requirements, but is nevertheless considered suitable for use "as is", or after rework by an
approved method.
Q160. What is the waterfall model?
A: Waterfall is a model of the software development process in which the concept phase, requirements
phase, design phase, implementation phase, test phase, installation phase, and checkout phase are
performed in that order, probably with overlap, but with little or no iteration.
Q161. What are the phases of the software development process?
A: The software development process consists of the concept phase, requirements phase, design phase,
implementation phase, test phase, installation phase, and checkout phase.
Q162. What models are used in software development?
A: In software development process the following models are used: waterfall model, incremental
development model, rapid prototyping model, and spiral model.
Q163. What is SDLC?
A: A: SDLC is an acronym. It stands for "software development life cycle".
Q164. Can you give me more information on software QA/testing, from a tester's point of
view?
A: Yes, I can. You can visit my web site, and on pages www.robdavispe.com/free and
www.robdavispe.com/free2 you can find answers to many questions on software QA, documentation, and
software testing, from a tester's point of view. As to questions and answers that are not on my web site
now, please be patient, as I am going to add more answers, as soon as time permits.
Q165. What is the difference between system testing and integration testing?
A: System testing is high level testing, and integration testing is a lower level testing. Integration testing
is completed first, not the system testing. In other words, upon completion of integration testing, system
testing is started, and not vice versa. For integration testing, test cases are developed with the express
purpose of exercising the interfaces between the components. For system testing, on the other hand, the
complete system is configured in a controlled environment, and test cases are developed to simulate real
life scenarios that occur in a simulated real life test environment. The purpose of integration testing is to
ensure distinct components of the application still work in accordance to customer requirements. The
purpose of system testing, on the other hand, is to validate an application's accuracy and completeness
in performing the functions as designed, and to test all functions of the system that are required in real
life.
Q166. What are the parameters of performance testing?
A: The term 'performance testing' is often used synonymously with stress testing, load testing, reliability
testing, and volume testing. Performance testing is a part of system testing, but it is also a distinct level
of testing. Performance testing verifies loads, volumes, and response times, as defined by requirements.
Q167. What types of testing can you tell me about?
A: Each of the followings represents a different type of testing approach: black box testing, white box
testing, unit testing, incremental testing, integration testing, functional testing, system testing, end-to-
end testing, sanity testing, regression testing, acceptance testing, load testing, performance testing,
usability testing, install/uninstall testing, recovery testing, security testing, compatibility testing,
exploratory testing, ad-hoc testing, user acceptance testing, comparison testing, alpha testing, beta
testing, and mutation testing.
Q168. What is disaster recovery testing?

27
A: Disaster recovery testing is testing how well the system recovers from disasters, crashes, hardware
failures, or other catastrophic problems.
Q169. How do you conduct peer reviews?
A: The peer review, sometimes called PDR, is a formal meeting, more formalized than a walk-through,
and typically consists of 3-10 people including a test lead, task lead (the author of whatever is being
reviewed), and a facilitator (to make notes). The subject of the PDR is typically a code block, release,
feature, or document, e.g. requirements document or test plan. The purpose of the PDR is to find
problems and see what is missing, not to fix anything. The result of the meeting should be documented
in a written report. Attendees should prepare for this type of meeting by reading through documents,
before the meeting starts; most problems are found during this preparation. Preparation for PDRs is
difficult, but is one of the most cost-effective methods of ensuring quality, since bug prevention is more
cost effective than bug detection.
Q170. How do you check the security of your application?
A: To check the security of an application, we can use security/penetration testing. Security/penetration
testing is testing how well the system is protected against unauthorized internal or external access, or
willful damage. This type of testing usually requires sophisticated testing techniques.
Q171. How do you test the password field?
A: To test the password field, we do boundary value testing.
Q172. When testing the password field, what is your focus?
A: When testing the password field, one needs to verify that passwords are encrypted.
Q173. What stage of bug fixing is the most cost effective?
A: Bug prevention, i.e. inspections, PDRs, and walk-throughs, is more cost effective than bug detection.
Q174. What is the objective of regression testing?
A: The objective of regression testing is to test that the fixes have not created any other problems
elsewhere. In other words, the objective is to ensure the software has remained intact. A baseline set of
data and scripts are maintained and executed, to verify that changes introduced during the release have
not "undone" any previous code. Expected results from the baseline are compared to results of the
software under test. All discrepancies are highlighted and accounted for, before testing proceeds to the
next level.
Q175. What types of white box testing can you tell me about?
A: White box testing is a testing approach that examines the application's program structure, and derives
test cases from the application's program logic. Clear box testing is a white box type of testing. Glass box
testing is also a white box type of testing. Open box testing is also a white box type of testing.
Q176. What types of black box testing can you tell me about?
A: Black box testing is functional testing, not based on any knowledge of internal software design or
code. Black box testing is based on requirements and functionality. Functional testing is also a black-box
type of testing geared to functional requirements of an application. System testing is also a black box
type of testing. Acceptance testing is also a black box type of testing. Functional testing is also a black
box type of testing. Closed box testing is also a black box type of testing. Integration testing is also a
black box type of testing.
Q177. Is the regression testing performed manually?
A: It depends on the initial testing approach. If the initial testing approach is manual testing, then,
usually the regression testing is performed manually. Conversely, if the initial testing approach is
automated testing, then, usually the regression testing is performed by automated testing.
Q178. Please give me others' FAQs on testing.
A: Visit my web site, and on pages www.robdavispe.com/free and www.robdavispe.com/free2 you can
find answers to the vast majority of other testers' FAQs on testing, from a tester's point of view. As to
questions and answers that are not on my web site now, please be patient, as I am going to add more
FAQs, as soon as time permits.
Q179. Can you share with me your knowledge of software testing?
A: Surely I can. For my knowledge on software testing, visit my web site, www.robdavispe.com/free and
www.robdavispe.com/free2. As to knowledge that is not on my web site at the moment, please be
patient, as I am going to add more answers, as soon as time permits.

28
Q180. How can I learn software testing?
A: I suggest you visit my web site, www.robdavispe.com/free and www.robdavispe.com/free2, and you
will find answers to most questions on software testing. As to questions and answers that are not on my
web site now, please be patient, as I am going to add more answers, as soon as time permits. I also
suggest you get a job in software testing. Why? Because you can get additional, usually free, education
on the job, while you are getting paid to do software testing. On the job you can use many software
tools, including Winrunner, LoadRunner, LabView, and Rational Toolset. The selection of tools will depend
on the end client, their needs, and preferences. I also suggest you sign up for courses at nearby
educational institutes. Classroom education, especially non-degree courses in local community colleges,
tends to be highly cost effective.
Q181. What is your view of software QA/testing?
A: Software QA/testing is easy, if requirements are solid, clear, complete, detailed, cohesive, attainable
and testable, if schedules are realistic, and if there is good communication. Software QA/testing is a piece
of cake, if project schedules are realistic, if adequate time is allowed for planning, design, testing, bug
fixing, re-testing, changes, and documentation. Software QA/testing is easy, if testing is started early on,
if fixes or changes are re-tested, and if sufficient time is planned for both testing and bug fixing. Software
QA/testing is easy, if new features are avoided, if one is able to stick to initial requirements as much as
possible.
Q182. How can I be a good tester?
A: We, good testers, take the customers' point of view. We are tactful and diplomatic. We have a "test to
break" attitude, a strong desire for quality, an attention to detail, and good communication skills, both
oral and written. Previous software development experience is also helpful as it provides a deeper
understanding of the software development process.
Q183. What is the difference between a software bug and software defect?
A: A 'software bug' is a *nonspecific* term that means an inexplicable defect, error, flaw, mistake,
failure, fault, or unwanted behavior of a computer program. Other terms, e.g. 'software defect' and
'software failure', are *more specific*. While the term bug has been a part of engineering jargon for
many-many decades, there are many who believe the term 'bug' was named after insects that used to
cause malfunctions in electromechanical computers.
Q184. How can I improve my career in software QA/testing?
A: Invest in your skills! Learn all you can! Visit my web site, and on www.robdavispe.com/free and
www.robdavispe.com/free2 you will find answers to the vast majority of questions on testing, from
software QA/testers' point of view. Get additional education, on the job. Free education is often provided
by employers, while you are paid to do the job of a tester. On the job, often you can use many software
tools, including WinRunner, LoadRunner, LabView, and Rational Toolset. Find an employer whose needs
and preferences are similar to yours. Get an education! Sign up for courses at nearby educational
institutes. Take classes! Classroom education, especially non-degree courses in local community colleges,
tends to be inexpensive. Improve your attitude! Become the best software QA/tester! Always strive to
exceed the expectations of your customers!
Q185. How do you compare two files?
A: Use PVCS, SCCS, or "diff". PVCS is a document version control tool, a competitor of SCCS. SCCS is an
original UNIX program, based on "diff". Diff is a UNIX utility that compares the difference between two
text files.
Q186. What do we use for comparison?

A: Generally speaking, when we write a software program to compare files, we compare two files, bit by
bit. When we use "diff", a UNIX utility, we compare the difference between two text files.
Q187. What is the reason we compare files?
A: Configuration management, revision control, requirement version control, or document version control.
Examples are Rational ClearCase, DOORS, PVCS, and CVS. CVS, for example, enables several, often
distant, developers to work together on the same source code.
Q188. When is a process repeatable?

29
A: If we use detailed and well-written processes and procedures, we ensure the correct steps are being
executed. This facilitates a successful completion of a task. This is a way we also ensure a process is
repeatable.
Q189. What does a Test Strategy Document contain?
A: The test strategy document is a formal description of how a software product will be tested. A test
strategy is developed for all levels of testing, as required. The test team analyzes the requirements,
writes the test strategy and reviews the plan with the project team. The test plan may include test cases,
conditions, the test environment, and a list of related tasks, pass/fail criteria and risk assessment.
Additional sections in the test strategy document include: A description of the required hardware and
software components, including test tools. This information comes from the test environment, including
test tool data. A description of roles and responsibilities of the resources required for the test and
schedule constraints. This information comes from man-hours and schedules. Testing methodology. This
is based on known standards. Functional and technical requirements of the application. This information
comes from requirements, change request, technical, and functional design documents. Requirements
that the system cannot provide, e.g. system limitations.
Q190. What is test methodology?
A: One test methodology is a three-step process. Creating a test strategy, Creating a test plan/design,
and Executing tests. This methodology can be used and molded to your organization's needs. Rob Davis
believes that using this methodology is important in the development and ongoing maintenance of his
customers' applications.
Q191. How can I start my career in Automated testing?
A: For one, I suggest you read all you can, and that includes reading product description pamphlets,
manuals, books, information on the Internet, and whatever information you can lay your hands on. Two,
get hands-on experience on how to use automated testing tools. If there is a will, there is a way! You
CAN do it, if you put your mind to it! You CAN learn to use WinRunner, and many other automated
testing tools, with little or no outside help. Click on a link!

30