S/M No.

Service Manual
Washing Machine
Model:
DWD-G1081TC

✔ Caution
: In this Manual, some parts can be changed for improving,
their performance without notice in the parts list. So, if you
need the latest parts information, please refer to PPL(Parts
Price List) in Service Information Center (http://svc.dwe.co.kr).

DAEWOO ELECTRONICS CORP.

http : //svc.dwe.co.kr Aug. 2013
AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER
AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER
AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER
AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER
AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER
AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER
AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER
AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER
AUTO WASHER

Contents
WASHING MACHINE

1. SPECIFICATIONS....................................................................................................................2

2. INSTALLATION .....................................................................................................................10
Removing transit bolts ....................................................................................................10
Installation place requirement.........................................................................................11
BS Plug Safety Details (For U.K. User)..........................................................................11
Connecting inlet hose .....................................................................................................12
Installation of drain hose.................................................................................................13
Level adjustment.............................................................................................................14

3. MAINTENANCE .....................................................................................................................15
Cleaning your washer .....................................................................................................15
Cold condition .................................................................................................................15
Cleaning the water inlet filter ..........................................................................................16
Cleaning the drain pump filter.........................................................................................16
Cleaning the detergent case...........................................................................................17
Cleaning the washing drum ............................................................................................17

4. DIRECTION FOR DISASSEMBLY........................................................................................18

5. EXPLODE VIEW AND PARTS LIST.....................................................................................21

6. FUNCTIONS OF THE CONTROL PANEL............................................................................39

7. FUNCTIONS OF THE CONTROLLER..................................................................................57

8. FUNCTION OF THE CONVENIENT SERVICE.....................................................................60

9. TROUBLESHOOTING GUIDE ..............................................................................................62

10. WIRING DIAGRAM ..............................................................................................................66

 ■ DWD-FC1X8X SERIES
HOT
(OPTION) COLD

INLET HOSE

DETERGENT CASE

POWER CORD

CONTROL PANEL

DOOR
HOSE DRAIN

ADJUSTABLE LEG
LOWER COVER

MODEL DWD-FC1081/FC1082/FC1083/FC1084/FC1281/FC1282/FC1283
POWER SOURCE 220-240V, 50/60Hz
DiMENSION (WXDXH) 595MM x 590MM x 850MM
WEIGHT 59Kg(NET) / 63Kg(GROSS)
WATER CONSUMPTION 50ὀ
POWER CONSUMPTION 2200W
MAXIMUM MASS WASH 6 / 6.5 / 7 / 8 kg
OF TEXTILE SPIN 6 / 6.5 / 7 / 8 kg
WASHER TYPE DRUM TYPE (FRONT LOADING WASHING MACHINE)
OPERATING WATER PRESSURE 0.3 ~ 8kgf/cm2 (29.4 ~ 784kPa)

■ Accessories
Inlet hose Manual Cap holder(3EA)

8 SPECIFICATIONS
 2. INSTALLATION

■ Transit bolts
The appliance is fitted with transit bolts to prevent internal damage during transport.

■ Removing transit bolts

1. To prevent internal damage during transport, the 2. Unscrew the 3 bolts with the spanner supplied,
special 3 bolts are locked. Before operating the and take out the 3 bolts with the rubber bungs.
washer, remove the bolts along with the rubber Keep the 3 bolts and the spanner for future use.
bungs.
• Whenever the appliance is transported, the
• If they are not removed, it may cause heavy transit bolts must be refitted.
vibration, noise and malfunction.

3. Close the holes with the caps supplied.

10 INSTALLATION
■ Installation place requirement
Level floor :
Allowable slope under entire washer is 1°.
Power outlet :
Must be with 1.5 meters of entire side of location of
washer. Do not overload the outlet with more than
one appliance.
Additional Clearance :
For wall, door and floor modeling is required.
(10cm : rear / 2cm : right & left side)

Do not place or store laundry products on top of

washer at any times.
They can damage the finish or controls.

■ BS Plug Safety Details (For U.K. User)

IMPORTANT
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE:
GREEN AND YELLOW : EARTH
BLUE : NEUTRAL
BROWN : LIVE
This appliance must be earthed

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked
with the letter E or by the earth symbol or coloured Green or Green and Yellow.
The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black.
The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or
coloured Red.
If a 13 amp (BS 1363) plug is used, fit a 13amp BS 1362 fuse.

INSTALLATION 11
 ■ Connecting inlet hose

In using only one water tap or in case of only one water inlet valve, connect the inlet hose to the cold water inlet valve.
Option : Be careful not to confuse hot water inlet and cold water inlet.

FOR ORDINARY TAP

1 Pull down the collar 2 Loosen the four 3 Fit the water tap adapter into
of the inlet hose to screws properly in the water tap and tighten the
separate it from the order to fit into four screws evenly while
water tap adapter. water tap. pushing up the adapter so that
the
rubber packing can stick to the
water tap tightly.

TAPE

4 Remove the tape, 5 Connect the inlet 6 Connect the inlet hose
and screw connector hose to the water tap adapter of the hose to the
B into connector A adapter by pulling down water inlet of the washer by
tightly. the collar of the hose turning it clockwise to be fixed
end. tightly.

Connector A

Connector B

• Please check the rubber

packing present inside the inlet
hose adapter of the hose.

FOR SCREW-SHAPED TAP

1 Connect the inlet hose 2 Connect the 3 Connect the inlet hose adapter
to the water tap connector- inlet to the water inlet of the washer
adapter by pulling supplied if and turn it to be fixed.
down the collar of the necessary.
hose end.
Connector
Inlet

Rubber
Rubber Packing
Packing
Connector D
Connector D

Hose
Connector C
Inlet Hose Connector C
• Check the packing in the inlet.

12 INSTALLATION
■ Installation of drain hose

Laundry tub

Tie max. 100 cm

strap min. 60cm
max. 100 cm
min. 60cm

• The drain hose should not be placed higher than 100cm above the floor.
• Proper securing of the drain hose will protect the floor from damage due to water leakage.
• When the drain hose is too long, do not force back in to the washer. This cause abnormal noise.

INSTALLATION 13
 ■ Level adjustment
1. The level adjustment of the washing machine
prevents excessive noise and vibration.
Install the washing machine on a solid and even
floor surface, if possible, in a corner of the room.

Note: The wooden floor may cause excessive

vibration.

2. If the floor is uneven, adjust the adjustable leg as

the following.
(Do not insert pieces of wood etc. under legs.)
• Please check whether there is any gap between
four adjustable legs and the floor.
• Turn adjustable legs by the enclosed spanner in
leg order to adjust the level of the washing machine.
• Make it sure that there is no swaying of the
washing machine and check that the washing
machine is even completely. (use a spirit level)
• After the level adjustment is finished, turn fixing
nuts up tightly so that the washing machine
maintains the adjustment.
leg

Fixing Nut

❈ Diagonal Check
When pushing down the edges of the washing
machine top plate diagonally, the machine should
not move up and down at all.
(Please, check both of two directions)
If machine rocks when pushing the machine top
plate diagonally, adjust legs again.

14 INSTALLATION
 3. MAINTENANCE
❈ Before cleaning the washer interior, unplug the electrical power cord avoid electrical shock hazards.

■ Cleaning your washer

1. Exterior
Proper care of your washer can extend its life.
The outside of the machine can be cleaned with warm water and a neutral non abrasive household detergent.
Immediately wipe off any spills. Wipe with damp cloth.
Try not to hit surface with sharp objects.
• Do not use methylated spirits, diluents or similar products.

2. Interior
Dry around the washer door opening, flexible gasket and door glass.
Run washer through a complete cycle using hot water.
Repeat process if necessary.
• Remove hard water deposits using only cleaners labeled as washer safe.

■ Cold condition

If the washer is stored in an area where freezing may occur or moved in freezing temperature,
follow these instructions to prevent damage to the washer.

1. Turn off water supply tap.

2. Disconnect hoses from water supply and drain water from hoses.
3. Plug electrical cord into a properly grounded electrical outlet.
4. Add 1gallon(3.8L) of nontoxic recreational vehicle(RV) antifreeze into empty wash drum.
Close the door.
5. Set spin cycle and let washer spin for 1minute to drain out all water.
6. Unplug eletrical power cord, dry the drum interior, and close the door.
7. Remove detergent case and dry excessive water from the compartments.
8. Store washer in an upright position.
9. To remove antifreeze from washer after storage, run empty washer through a complete cycle using detergent.
Do not add wash load.

MAINTENANCE 15
 ■ Cleaning the water inlet filter

• "IE" error message will blink on the control panel when water does not enter the detergent drawer.
• If your water is very hard or contains traces of lime deposit, the water inlet filter may become clogged.
• It is therefore a good idea to clean it from time to time.

1. Turn off the 2. Unscrew the

water tap. water inlet
hose.

3. Clean the filter 4. Tighten up the

using a had inlet hose.
bristle brush.

■ Cleaning the drain pump filter

• The drain filter collects threads and small objects left in the laundry.
• Check regularly that the filter is clean to ensure smooth running of your machine.

CAUTION Be careful when draining if the water is hot.

1. Open the lower cover(1) by 2. Unplug the cap hose(2), allowing 3. Remove any foreign material
using a coin. Turn the cap the water to flow out. At this time use from the pump filter(3). After
hose(2) to pull out the hose. a vessel to prevent water flowing on cleaning, turn the pump filter
Pull out the hose maximally. to the floor. When water does not clockwise and insert the cap
(About 13~14cm.) flow any more, turn the pump hose(2) to the original place.
filter(3) open to the left. Close the lower cover.

100

about
13~14cm
about
13~14cm 3

1
2 3 2

16 MAINTENANCE
■ Cleaning the detergent case

❈ After a while detergents and fabric softeners leave a deposit in the detergent case.
• It should be cleaned from time to time with a jet of running water.
• If necessary it can be removed completely from the machine by pressing the catch downwards and by pulling it out.
• To facilitate cleanling, the upper part of the fabric softener compartment can be removed.
MAX

MAX
max max

Inlet box recess

❈ Detergent can also accumulate inside the recess which should be cleaned
occasionally with an old toothbrush.
• Once you have finished cleaning, replace the detergent case and run a rinse
cycle without laundry.

■ Cleaning the washing drum

• If you live in a hard water area, limescale may continuously build up in places where it cannot be seen and thus
not easily removed.
• Over time the build up of scale clogs appliances, and if it is not kept in check these may have to be replaced.
• Although the washing drum is made of stainless steel, specks of rust can be caused by small metal articles (paper
clips, safety pins) which have been left in the drum.
• The washing drum should be cleaned from time to time.
• If you use descaling agents, dyes or bleaches, make sure they are suitable for washing machine use.
❈ Descaler may contain chemicals that may damage part of your washing machine.
❈ Remove any spots with a stainless steel cleaning agent.
❈ Never use steel wool.

MAINTENANCE 17
 4. DIRECTION FOR DISASSEMBLY

DOOR LOCK SWITCH

1) Open the door and remove the gasket clamp. 2) Remove the gasket from the front cabinet.

3) Remove two screws, and remove the door lock

switch.

HEATER AND THERMISTOR

1) Remove four screws on the back cover, and 2) Remove connectors and the earth terminal.
remove the back cover.

18 DIRECTION FOR DISASSEMBLY

3) Remove the nut by using a box wrench, and 4) Loosen the nut by using a box wrench, and pull out
remove the earth terminal. the heater.

UNIVERSAL MOTOR

1) Remove the belt from the pulley. 2) Lay the right side of the washer on the floor,
and remove the connector.

3) Remove two bolts and two nuts mounting the motor 4) Remove the motor from the tub.
by using a box wrench.

DIRECTION FOR DISASSEMBLY 19

 DRAIN PUMP

1) Lay the right side of the washer on the floor, and 2) Remove connectors.
remove the lower panel by pressing six sanp fits.

3) Remove the screw, and remove the drain pump from 4) Remove the drain hose.
the lower frame.

5) Remove the inner drain hose, and remove the drain

pump.

20 DIRECTION FOR DISASSEMBLY

 5. EXPLODE VIEW AND PARTS LIST

■ BOX INLET AS

DWD-FC1X6X SERIES

A01
A15

DWD-FC1X7X SERIES

A01
A15

EXPLODE VIEW AND PARTS LIST 21

 No. PART NAME PART CODE SPECIFICATION Q'TY REMARK
3612608700 ABS DWD-F1X11(2)
3612608710 ABS + SPRAY DWD-F1X13
3612608900 ABS DWD-F1X21(2)
3612608910 ABS + SPRAY DWD-F1X23
3612609700 ABS DWD-F1X31(2)
3612609710 ABS + SPRAY DWD-F1X33
A01 HANDLE CASE 3611148000 HIPS, D-FU124'S 1 DWD-F1X41(2)
(CASE HANDLE) DWD-F1X51(2)
3611148001 ABS + SPRAY DWD-F1X43
DWD-F1X53
3611149500 D-F'SERIES 6TH, ABS DWD-F1X61(2)
3611149510 ABS + SPRAY DWD-F1X63
3611149600 D-F'SERIES 7TH , ABS DWD-F1X71(2)
3611149610 ABS + SPRAY DWD-F1X73
36111T3A00 ABS 1 DWD-F1X9`S
A02 CASE DETERGENT 3611140300 PP 1
A03 CAP SOFTENER 3610916600 PP 1
A04 BOX INLET 3610526500 PP 1
3618112200 COLD
A05 NOZZLE AS NOZZLE TOP + NOZZLE UNDER 1
3618105200 COLD+HOT
A06 SCREW TAPPING 7122402011 T2S TRS 4x20 MFZN 1
A08 HOSE INLET 3613276600 EPDM U-TRAP 1
A09 CLAMP HOSE I 3611201400 HSW3, D2.6, MFZN, ID=38 1
A10 HOSE WATER SUPPLY 3613270900 EPDM, ID9.5, OD14.5, L=225 2(3) COLD(+HOT)
A11 CLAMP HOSE 3611205800 100H, ID=13.8 W=10.0 0.9T 4(6) COLD(+HOT)
3615414900 220-240V 2-WAY PP/BRACKET COLD VALVE
A12 VALVE INET 3615414910 220-240V 2WAY NYLON VDE 1
3615416821 220-240V.VDE.BITRON.2WAY + DR TECH COLD VALVE(EU)
3615414800 220-240V,50/60Hz,1WAY HOT VALVE
A13 VALVE INLET 1
3615416720 220-240 50/60-1WAY,HOT,BITRON,VDE HOT VALVE(EU)
A14 SCREW TAPTITE 7272400811 TT3 TRS 4X8 MFZN 2(4) COLD(+HOT)
3611698000 D-F'SERIES 6TH ,ABS DWD-F1X6X
A15 DECO CASE HANDLE 1
3611698400 D-F'SERIES 7TH , ABS DWD-F1X7X

22 EXPLODE VIEW AND PARTS LIST

■ BOX INLET AS (DWD-FC1X8X SERIES)

No. PART NAME PART CODE SPECIFICATION Q'TY REMARK

A01 CASE HANDLE 36111T2W00 HIPS, FT1081 1 DWD-FT1*81
- ABS + SPRAY, FT1081 1 DWD-FT1*81
A02 CASE DETERGENT 3611145800 PP 1 DWD-FT1*81
A03 CAP SOFTENER 3610907800 PP 1 DWD-FT1*81
A04 INLET BOX 3617511800 PP, D-FU1081 1 DWD-FT1*81
A05 NOZZLE UNDER 3618103410 PP 1 M’S
A06 NOZZLE TOP 3618112200 PP, Cold only 1 DWD-FT1*81
3618112210 PP, Cold + Hot 1 DWD-FT1*81
A07 HOSE WATER SUPPLY 3613270900 EPDM,ID9.5,OD14.5, L=310 2(3) COLD(+HOT)
A08 CLAMP HOSE 3611205800 100H,ID=13.8,W=10,0.9T 4(6) COLD(+HOT)
A09 VALVE INLET 3615414900 220~240V, 2-WAY, PP/BRACKET 1 COLD
3615416821 220~240V, VDE,2-WAY+DR TECH INSPECTION COST COLD(EU)
3615414800 220~240V, 1-WAY, HOT PP/BRACKET 1 HOT(OPTION)
A10 SCREW TAPTITE 7272400811 TT3, TRS 4X8 MFZN 2(4) COLD(+HOT)
A11 SCREW TAPPING 7122401411 T2S,TRS, 4X14 MFZN 1
A12 HOSE INLET 3613276600 EPDM, FT1081 1
A13 CLAMP HOSE 3611201401 HSW3,YW,D2.6,ID36,W44.5 1

EXPLODE VIEW AND PARTS LIST 23

■ PANEL FRONT AS (DWD-FC1X8X SERIES)

No. PART NAME PART CODE SPECIFICATION Q'TY REMARK

F01 PANEL F 36142T3A00 HIPS, FT1081 1
F02 BUTTON P.S 3616647600 ABS, FT1081 1
F03 WINDOW DISPLAY 3615511700 ABS(TR), FT1081 1
F04 DECO DIAL 36166DGQ00 ABS, FT1081 1
F05 KNOB DIAL 3616647700 ABS, FT1081 1
F06 SHAFT KNOB 3614905700 POM, MU802'S 1
F07 CASE PCB F 36111T2X00 HIPS, FT1081 1
F08 PCB DEFAULT AS PRPSSWB--- DWD-F1XXX SERIES 1 Refer to
Detailed Part Code
of PCB AS
F09 SCREW TAPPING 7122300811 T2S TRS 3X8 3
F10 SCREW TAPPING 7122401411 T2S TRS 4X14 4

EXPLODE VIEW AND PARTS LIST 31

■ CABINET FRONT AS

• 2 pcs Type

No. PART NAME PART CODE SPECIFICATION Q'TY REMARK

3610811210 PCM, SGCC 0.8T, SILVER DWD-FT1XX3
C01 CABINET FRONT 1
3610811220 SECD 0.7T DWD-FT1XX1(2)
C02 SWITCH DOOR LOCK 3619047100 DL-LC.BITRON_3P.250V16A.BI-METAL 1
C03 SCREW TAPPING 7122401208 T2S TRS 4X12 SUS 2
C04 PLATE HINGE SUPPORT 3614531900 SGCC T1.6 0 No use
C05 HINGE DOOR 3612902800 ALDC 1
C06 CAP HINGE DOOR 3610916500 POM 2
C07 SCREW TAPPING 3616030000 F/L BOLT(SE) 5*12 SUS 2
C08 SCREW TAPPING 3616029950 TTS"S" HEX F/L 4*8 6
C09 CLAMP DOOR AS 3611204810 HSW3, D=1.4 GS 1
C10 FRAME DOOR I 3612205200 PP 1
C11 HANDLE DOOR 3612608600 ABS 1
C12 PIN HANDLE 3618200200 SUS304, D3, L48 1
C13 SPRING HOOK 3615114600 SUS D1.4 1
C14 HOOK DOOR 3613100700 ZNDC 1
C15 DOOR GLASS 361A110700 GLASS PI300 1
3612205102 HIPS D-F'S DWD-FT1XX1
C16 FRAME DOOR O
3612205120 CR3 DWD-FT1XX2(3)
C17 SCREW TAPPING 7115402008 T1S FLT 4*20 SUS 6
C18 FRAME DOOR O 3612211900 D-F'S, 2 PCS TYPE, ABS, BLACK
1 2 pcs type(option)
3612211910 D-F'S, 2 PCS TYPE, HIPS, WHITE
C19 DECO DOOR O 3612212000 D-F'SERIES 6&7TH , ABS 1

EXPLODE VIEW AND PARTS LIST 33

 ■ TUB ASS’Y

34 EXPLODE VIEW AND PARTS LIST

No. PART NAME PART CODE SPECIFICATION Q'TY REMARK
T01 BALANCER WEIGHT F L/R 3616106330 D-FC/FB Ě‫ڏ‬ 2 6.5 kg (L,R 2EA, FD's)
T02 SPECIAL SCREW 3616029400 SWCH 8.5X30 11 B/W Front / B/W Top
T03 GASKET 3612327300 EPDM, D-FT1081 1
T04 CLAMP GASKET AS 3611204520 HSW3, GS 1
T05 TUB *F 3618831000 FRPP, FT1081 1
T06 SPECIAL SCREW 3616062700 SWRCH 18A 5.6X30 12
T07 DAMPER FRICTION 361A700140 70N CIMA ST=170-260 DL=202 1
T08 DAMPER FRICTION 361A700140 70N CIMA ST=170-260 DL=202 1
T09 DAMPER PIN 361A700200 AKS D=14.5 2
T10 SPRING SUSPENSION L 3615118710 FU1081, D=3.2 L=165 K=0.664 1
T11 SPRING SUSPENSION R 3615118760 FU1081, D=3.2 L=159 K=0.455 1
T12 HOSE VENT 3613267100 EPDM 1
T13 CLAMP HOSE 3611204700 D26 1
T14 HOSE DRAIN 3613267300 EPDM 1
T15 AIR TRAP 361A500101 PP 1
T16 HOSE AIR 3613268600 ID=4,OD=8, L=580 1
T17 CLAMP AS 3611203210 ID=61, WIRE+GUIDE+BOLT, GS 1
T18 CLAMP HOSE 3611201401 HSW3,YW,D2.6,ID36,W44.5 1
T19 CLAMP HOSE 3611204700 D26 1
T20 DRUM SUB AS 3617004002 D-F 0.4T(CENTER, REAR), 0.5(FRONT) 1
T21 LIFTER WASH 361A400410 PP D-F'S NANO 3
T22 SPIDER AS 361A301500 D-FT1081 1
T23 SPECIAL SCREW 3616029500 SUS430 8*25 3
T24 WATER SEAL 361A600100 NBR 1
T25 BEARING INNER 3616303100 F,L,E,U,6206Z 1 1 piece
T26 BEARING HOUSING 3616305600 ALDC, FT1081 1
SVC part
T27 BEARING OUTER 3616303200 F,L,E,U,6205Z 1
T28 TUB REAR 3618831100 FRPP, FT1081 1
T29 SEALING TUB 3612321601 EPDM L1600(-0~ +10) 1
T30 FIXTURE HEATER 3612007300 SUS 0.7T 440X45 1
T31 SCREW TAPPING 7122401408 T2S TRS 4*14 SUS,STS 2
T32 HEATER WASH 3612803600 230V 2000W.1R5A721001.IRCA FUSE 2EA 1 CE, CB
3612803700 230V 2000W.1R5A721002.IRCA FUSE 2EA 1
Standard
3612803800 240V 2000W.1R5A721003.IRCA FUSE 2EA 1
3612802400 220V 2KW.1R0A721001.RW8TF.IRCA 1
3612802420 240V 2KW.1R0A721003.RW8TF.IRCA 1
T33 THERMISTOR WASH 361AAAAB10 R25=1.704_ R80=11.981_ 1
T34 UNIT MOTOR UNIVERSAL 36189L4H30 DC220V 50HZ 2P PI340 45T DUM-66 TONLON 1
36189L4H10 AC220~240/50 G&J GJ-2UA005A 2P PI340 45T(CCA) 1 option
36189L4H20 DC220/50 C&M 2P PI340 45T(AL) 1 option
T35 SPECIAL SCREW 3616007400 T2S TRS 4X10+24 2
T36 UNIT BUBBLE PUMP AS 36189L4120 220-240V DBK-240DB RP CHSHION 1
T37 PULLEY 3618433200 ALDC, D-FU
T38 BELT V 3616591110 GATES 4PJ1120 BUTADIENE RUBBER 1
T39 SPECIAL BOLT AS 3616029600 SWCH 10*30,F/L BOLT S.P/W SEAL LOCK 1
T40 BALANCER WEIGHT TOP 3616112800 D-FC's, 6Kg 1 ֭‫ ۝‬Ҝॄ ‫ڏ۽‬L@ŝঐ ֭‫۝‬

EXPLODE VIEW AND PARTS LIST 35

 ■ CABINET AS

E22

E21

36 EXPLODE VIEW AND PARTS LIST

No. PART NAME PART CODE SPECIFICATION Q'TY REMARK
E01 CABINET 3610811101 SGCC(GI), 0.7TX825.7X1630.8 1
E02 FRAME LOWER 3612205501 SGCC T1.0 160X580 1
E03 FRAME TOP *L 36122UDY00 SGCC T=1.2, FT1081 1 1 piece
E04 FRAME TOP *R 36122UDZ00 SGCC T=1.2, FT1081 1 SVC part
E05 BASE UNDER *L 3610392201 SGCC T1.4 100x500 1
E06 BASE UNDER *R 3610392301 SGCC T1.4 100x500 1
E07 FRAME UPPER 3612205801 SGCC T1.0 580X55 1 DWD-FT1*1*~1*7*
36122UE000 SGCC1.0T , FT1081 1 DWD-FT1*8*
E08 SCREW TAPPING 3616029950 TTS"S" HEX F/L 4X8 4
E09 SPECIAL BOLT 3616029100 M4x12.5, MACHINE 2
E10 STOPPER SPRING 3615202200 POM 2
E11 COVER BACK AS 3611425520 COVER BACK+CUSHION 1
E12 SENSOR PRESSURE 3614825330 DL-DW11-H AIR INLET 90 HOOK TYPE 1
E13 UNIT DRAIN PUMP AS 36189L5K20 AL.220-240/50 B20-6 30W 6KG 1 220-240V 50Hz
36189L5J20 AL.220/60 B20-5 35W 6KG 1 220V 60Hz
E14 CAP WATER REMAIN 3610916800 PP 1
E15 HOSE WATER REMAIN 3613268700 EPDM, ID8.5, L200 1
E16 LEG ADJUST AS 3617703811 CHINA PARTS, DWD-900W 4
E17 HOSE DRAIN OUTER AS 361327492T D-F'S L1960, EXPORT GENERAL 1
E18 CLAMP HOSE 3611206410 NYLON, DA-16N, ID21.9 D-MU80 1
E19 SCREW TAPPING 7122401411 T2S TRS 4*14 MFZN 1
E20 CLAMP HOSE 3611204701 D26 1
E21 EMI FILTER 3611908810 D-FT1081, 2X0.47UP(X2), 2X1500PF(Y2), 1X471K(Z1) 1
E22 HARNESS AS 3612794304 D-FU NEW EMI NON HOT/NON BUBBLE 1

EXPLODE VIEW AND PARTS LIST 37

 ■ PLATE T AS + PANEL LOWER AS

No. PART NAME PART CODE SPECIFICATION Q'TY REMARK

3614532900 DWD-800W(HIPS, MFC, WH) DWD-F1X11(2)
3614532910 ABS+UV SPRAY, MFC, SILVER DWD-F1X13
3614532920 DWD-F1X2X(HIPS, MFC, WH) DWD-F1X21(2)
3614532930 ABS+UV SPRAY, MFC, SILVER DWD-F1X23
3614533300 FX1X31~2, 41~2(HIPS, MFC, WH) DWD-F1X31(2)
DWD-F1X41(2)
DWD-F1X51(2)
F01 PLATE TOP AS 1
DWD-F1X61(2)
DWD-F1X71(2)
3614533310 F3~F4'S, SPRAY(ABS, MFC, SILVER) DWD-F1X33
DWD-F1X43
DWD-F1X53
DWD-F1X63
DWD-F1X73
F02 SCREW TAPPING 7122401411 T2S TRS 4x14 MFZN 2
F03 PANEL LOWER 3614282801 HIPS 1
F04 COVER PUMP FILTER 3611425801 HIPS 1

38 EXPLODE VIEW AND PARTS LIST

■ DWD-FC1X8X SERIES

Program selector
For switching the washing machine on and off and for selecting the programs.
You can select the course you want by rotating program selector.
For the more detailed information, please refer to the page 11~20.
Can be rotated in both direction.
You can turn off the power by rotating program selector to the direction at 12
o'clock.
Even if the program selector rotates while the program is running, the program is
not changed(except for off ).

Operation and temporary stop is repeated as it is pressed.

When you want to change program in operating;
press the ‘Start/Hold’ button ᵎ select the program that you want to change ᵎ
press the ‘Start/Hold’ button again.

Rinse+
• Is used to add a rinse, which may assist in removing traces of detergent residue.
• By selecting Rinse+ function, the rinse time and the rinse water are increased.
• Rinse+ option is selectable with all programs except Rinse, Spin and Drain
programs.

Rinse Hold
• This function leaves clothes in the machine suspended in the water after a rinse
without entering into spin.
• To proceed through to a drain or spin, after the Rinse Hold function is completed,
use program selector(Drain or Spin program).
• Rinse Hold option is selectable with all programs except Drain program.

FUNCTIONS OF THE CONTROL PANEL 53

 Time Delay
• It can be used to pre-engage time for wash.
• Reservation can be made from 1 hours to 12 hours.
• Time Delay function is selectable with all programs.

Child Lock Mode

• Use this function when you want to protect any accident occurring from handling
of washer by a child.
• During an operation of washer, press ‘Rinse+’ and ‘Rinse Hold’ buttons
simultaneously.
• In Child Lock mode, no button functions except for off .
• In Child Lock mode, press ‘Rinse+’ and ‘Rinse Hold’ buttons simultaneously like
setting Child Lock and Child Lock is cancelled.
• To change to the desired program, while in Child Lock mode;
1. Press both the ‘Rinse+’ and ‘Rinse Hold’ buttons together once again.
2. Press the Start/Hold button.
3. Select the desired program and press the Start/Hold button again.

• The Child Lock will be cancelled when power is off .

Change
the desired
program

54 FUNCTIONS OF THE CONTROL PANEL

 7. FUNCTIONS OF THE CONTROLLER

⏿ Sequence Chart
Cotton Sythetic Eco
Division Progress Time
Small Low Small Low Small Low
P Sensing 20sec.
R Water Supply 2min.
E Pre Wash 10min.
W 8min.
A Drain 1min.
S B-Spin 1min.
H Middle Spin 3min.
Sensing 20sec. ■ ■ ■ ■ ■ ■
M Water Supply 2min. ■ ■ ■ ■ ■ ■
A Wash 1 90min.
I (Heating) 35min.
N 30min.
20min.
W
A 15min. ■ ■
S Wash 2 113min.
H 83min. 23min. 23min. 23min. 23min.
23min. ■ ■ 13min. 13min.. 13min.. 13min.
Drain 1min. ■ ■ ■ ■ ■ ■
B-Spin 1min. ■ ■ ■ ■ ■ ■
Middle Spin 4min. ■ ■ ■ ■
Water Supply 2min. ■ ■ ■ ■ ■ ■
Rinse 1-1 3min. ■ ■ ■ ■ ■ ■
Drain 1min. ■ ■
B-Spin 1min. ■ ■
Middle Spin 4min.
R Water Supply 2min. ■ ■
I Rinse 1-2 3min. ■ ■
N
Drain 1min. ■ ■ ■ ■ ■ ■
S
E B-Spin 1min. ■ ■ ■ ■ ■ ■
Middle Spin 4min. ■ ■ ■ ■ ■ ■
Water Supply 2min. ■ ■ ■ ■ ■ ■
Rinse 2 3min. ■ ■ ■ ■ ■ ■
Drain 1min. ■ ■ ■ ■ ■ ■
B-Spin 1min. ■ ■ ■ ■ ■ ■
Middle Spin 4min. ■ ■ ■ ■ ■ ■
Water Supply 2min. ■ ■ ■ ■ ■ ■
Rinse 3 3min. ■ ■ ■ ■ ■ ■
Drain 1min. ■ ■ ■ ■ ■ ■
S B-Spin 1min. ■ ■ ■ ■ ■ ■
P Main Spin 14min.
I 7min.
N 5min.
3min.
Untangle 2min. ■ ■ ■ ■ ■ ■
END
End 10sec. ■ ■ ■ ■ ■ ■
Remained Time Display 1:25 1:30 1:25 1:30 1:40 1:45
NOTE • The washing time may vary by the amount of laundry, water pressure, water temperature and other
washing conditions. If an unbalanced load is detected of if suds removing program operates, the
washing time maybe extended. (Maximum increasing time is about 1hour.)
• Spin speed 825 rpm is selected automatically with Cotton, Synthetic and Eco courses.

FUNCTIONS OF THE CONTROLLER 57

 Delicate Sports wear
Wool Hand wash Quick 30 Rinse + Spin
Division Progress Time 1X~5X 6X,7X
Small Small Small Small Small Low
Soak 30min.
M Water Supply 2min. ■ ■ ■ ■ ■ (1min.)
A Wash 1 60min.
I (Heating) 50min.
N
35min.
W 30min.
A 5min. ■
S Wash 2 20min. (13min.)
H 10min.
5min. ■
Drain 1min. ■ ■ ■ ■ ■
B-Spin 1min. ■ ■ ■ ■
Middle Spin 4min. ■ ■ ■ ■
Water Supply 2min. ■ ■ ■ ■ ■ (1min.) ■
Rinse 1 3min. ■ ■ ■ ■ ■ ■
R Drain 1min. ■ ■ ■ ■ ■
I B-Spin 1min. ■ ■ ■ ■
N Middle Spin 4min. ■ ■ ■ ■
S Water Supply 2min. ■ ■ ■ ■ ■ (1min.)
E Rinse 2 3min. ■ ■ ■ ■ ■
Drain 1min. ■
B-Spin 1min. ■
Middle Spin 4min. ■
Water Supply 2min. ■
Rinse 3 3min. ■
Drain 1min. ■ ■ ■ ■ ■ ■
S B-Spin 1min. ■ ■ ■ ■ ■ ■
P
Main Spin 7min.
I
N 5min.
3min.
Untangle 2min. ■ ■ ■ ■ ■ ■
END
End 10sec. ■ ■ ■ ■ ■ ■
Remained Time Display 56 56 49 57 33 17
NOTE
• The washing time may vary by the amount of laundry, water pressure, water temperature and other washing
conditions. If an unbalanced load is detected of if suds removing program operates, the washing time maybe
extended. (Maximum increasing time is about 1hour.)
• After the rinse progress in Quick30 course, the washer operating drain progress only without middle spin
progress.
• Spin speed 400 rpm is selected automatically with Wool, Delicate(Sports Wear) and Hand Wash courses.
• Apply 'Delicate' course : DWD-FC1X1X ~ DWD-FC1X5X models.
Apply 'Sports Wear' course : DWD-FC1X6X, DWD-FC1X7X models.

58 FUNCTIONS OF THE CONTROLLER

⏿ Sequence Chart (for apply 'Islamic Rinse' option)
Example) Apply 'Islamic Rinse' option with Cotton/Normal course.

Cotton/Normal Islamic Rinse Option

Division Progress Time
S (A) L (B) S (a) L (b)
Sensing 20sec. ■ ■
Water Supply 2min. ■ ■
Wash 1 30min.
MAIN (Heating) 15min. ■ Same as Same as
WASH 10min. ■ ■ ‘A’ ‘B’
Wash 2 63min.
23min. ■ ■
13min. ■ ■
Drain 1min. ■ ■
B-Spin 1min.
Same as Same as
Middle Spin 4min.
‘A’ ‘B’
Water Supply 2min. ■ ■
Rinse 1 3min. ■ ■
Drain 1min. ■ ■
B-Spin 1min. ■ ■
Same as Same as
RINSE Middle Spin 4min. ■ ■
‘A’ ‘B’
Water Supply 2min. ■ ■
Rinse 2 3min. ■ ■
Drain 1min. ■ ■
B-Spin 1min. ■ ■
Same as Same as
Middle Spin 4min. ■ ■
‘A’ ‘B’
Water Supply 2min. ■ ■
Rinse 3 3min. ■ ■
Drain 1min. ■ ■
Water Supply 2min. ■ ■
Islamic Rinse 3min. ■ ■
Rinse (with Water Supply and Drain)
1
B-Spin 1min. ■ ■
Middle Spin 4min. ■ ■
Islamic Water Supply 2min. ■ ■
Rinse Rinse 3min. ■ ■
2 (with Water Supply and Drain)
Drain 1min. ■ ■
B-Spin 1min. ■ ■
SPIN Main Spin 7min. ■ ■
Same as Same as
5min. ■ ■
‘A’ ‘B’
3min. ■ ■
Untangle 2min. ■ ■
END
End 10sec. ■ ■
Remained Time Display 1:25 1:30 1:41 1:46

NOTE
• Islamic Rinse is available in Cotton, Synthetic, Hand Wash and Sports Wear programs.
• By selecting Islamic Rinse function, the washer operates two additional rinse times
(Islamic Rinse process 1 and 2) after the basic rinse process.
And then the washing time will be extended about 16 minutes.

FUNCTIONS OF THE CONTROLLER 59

 8. FUNCTION OF THE CONVENIENT SERVICE

■ The test mode of the operation

You can check the PCB AS and the operation of the washing machine simply.

• The method to test and operate

1 Press the Power button.
2 Press the Option button 3 times while press the Temp button.
At this time, the version is displayed on the Custom LED
3 Whenever the Time Delay button is pressed, the washing machine is operated as following.
L_C (Lock Switch Close) → run/OO (The number of running times)
→ E5/OO → E6/OO → E7/OO → E8/OO (The number of the error occurrence)
→ H (Hot Valve) → C (Cold Valve) → P (Pre-Wash Valve)
→ bb (Bubble) → dr (Drain Pump)
→ C:H or C:-- (Cold & Hot Option)
→ nPC or PC or etc. (PCB Option)→ L_O (Lock Switch Open)
→ L_C → ... (repetition)

■ The check mode of the water level frequency

You can check the water level frequency of the current state and the frequency by the variation of the water
level.

• The method to test and operate

1 Press the Power button.
2 Press the Time Delay button 3 times while press the Temp button and the Spin button.
3 The water level frequency of the current state displays on “18:88 LED”.

ex) 562 = 25.62kHz

: It display three number except the first number of 25.62kHz

4 Whenever the Temp button is pressed, the washing machine is operated as following.
Cold Valve Off (Initial state)
→ Cold Valve On
→ Hot Valve On
→ Pre-Wash Valve On
→ Bubble Pump On
→ Drain Pump On
→ ... (repetition)

60 FUNCTION OF THE CONVENIENT SERVICE

■ The spinning test mode

You can continually spin the washing machine with constant speed.

• The method to test and operate

1 Press the Power button.
2 Press the Time Save button 3 times while press Temp button.
3 '400' displays on '18:88 LED'. 400 means the spinning rpm.
You can adjust the spinning rpm by pressing Spin button.
And this value increases by 50 up to 1400.
4 When press Start button, the washing machine continually operates with given spinning rpm.

■ The durability test mode

You can repetitively operate the washing machine with one course.

• The method to test and operate

1 Press the Power button.
2 Press the Time Delay button 3 times while press Temp button.
3 'd3' displays on '18:88 LED'. You can select the course by using Program Dial,
Temp button, Spin button, Option and Time Save button.
4 When press Start button, the washing machine repetitively operates with selected course.

FUNCTION OF THE CONVENIENT SERVICE 61

 9. TROUBLESHOOTING GUIDE
This wahing machine is equipped with automatic safety function which detect and diagnose faults at an
early stage and react appropriately.
When the machine does not function properly or does not fuction at all, check the following points.

SYMPTOM CAUSE SOLUTION

Rattling and Foreign objects such as coins or safety Stop washer and check drum and
clanking noise. pins maybe in the drum or pump. filter.

Thumping sound. Heavy wash loads may produce a If sound continues, washer is
thumping sound. probably out of balance. Stop and
This is usually normal. redistribute wash load.

Vibrating noise. Have all the transit bolts and packing If not removes during installation,
been removed? refer to installation guide for
removing transit bolts.

Are all the feet resting firmly on the Wash load may be unevenly
ground? distributed in drum. Stop washer and
rearrange wash load.

Water leaks. Inlet hoses or drain hose are loose at Check and tighten hose connections.
tap or washer.

House drain pipes are clogged. Unclog drain pipe. Contact plumber
if necessary.

Oversudsing. Too much detergent or unsuitable

detergent may cause excessive
foaming which may result in water
leaks.

Water does not enter Water supply is not adequate in area. Check another tap in the inlet house.
washer or it enters slowly.
Water supply tap is not completely open. Fully open tap.

Water inlet hose is kinked. Straighten hose.

The filter of the water inlet is clogged. Check the filter of the water inlet.

Water in the washer does Drain hose is kinked or clogged. Clean and straighten drain hose.
not drain or drains slowly.
The drain filter is clogged. Clean the drain filter.

62 TROUBLESHOOTING GUIDE
 SYMPTOM CAUSE SOLUTION

Washer does not start. Electronical power cord may not be Make sure plug fits tightly in wall outlet.
plugged in or connection may be loose.

House fuse blown, circuit breaker Reset circuit breaker or replace fuse.
tripped, or a power outage has Do not increase fuse capacity.
occurred. If problem is a circuit overload, have it
corrected by a qualified electrician.

Water supply tap is not turned on. Turn on water supply tap.

Washer will not spin. Check that the door is firmly shut. Close the door and press the
Start/Pause button. After pressing the
Start/Pause button, it may take a few
moments before the clothes washer
begines to spin. The door must lock
before spin can be achieved.

Door does not open. Once started, the door can not be
opened for safety reasons.
Wait two minutes before opening the
door to give the electric locking
mechanism time to release.

Wash cycle time delayed. The washing time may vary by the
amount of laundry, water pressure,
water temperature and other usage
conditions.
If the imbalance is detected, the wash
time shall be increased.

The washer will stop during PFE error due to much detergent and If PFE error mode was displayed on
spinning . unsuitable detergent. the control part, in order to solve this
Spinning is insufficient. problem, first turn off the power of the
washing machine, second turn on the
power pressing Power button, third
press SPIN button and last press
Start/Pause button.

TROUBLESHOOTING GUIDE 63
 MESSAGE ERROR CAUSE SOLUTION
The water tap is closed. Open the water tap.
The filter of the valve inlet is clogged. Clean the filter of the valve inlet.
The valve inlet is an inferior product or broke down. Change the valve inlet.
WATER INLET
IE The water level sensor (sensor pressure) is an inferior product Change the water level sensor
ERROR
or broke down. (sensor pressure).
The drain motor works during water supply. Change the drain motor.
The PCB ASS’Y does not check the water level. Change the PCB ASS’Y.
The drain hose is kinked or clogged. Clean and straighten the drain hose.
The drain motor is an inferior product. Change the drain motor.
DRAIN
OE The valve inlet works during drain. Change the valve inlet.
ERROR
The water level sensor is an inferior product. Change the water level sensor.
The PCB ASS’Y does not check the water level. Change the PCB ASS’Y.
UNBALANCE
UE The laundry is concentrated to one side of the drum during spin. Rearrange the laundry.
ERROR
The Start/Pause button is pressed while the door is opened. Close the door.
LE DOOR OPEN
The switch door lock is an inferior product. Change the switch door lock.
ERROR
The PCB ASS’Y does not check the door lock. Change the PCB ASS’Y.
The water is supplied continuously due to an inferior valve inlet. Change the valve inlet.
The valve inlet is normal, but the water level sensor Change the water level sensor
E2 OVERFLOW
(sensor pressure) is inferior. (sensor pressure).
ERROR
The drain motor does not work.
Change the drain motor.
(The drain motor is an inferior product or broke down.)
LEAKAGE Water leaks from the tub or the hose drain. Check the leak of the tub or the hose drain.
E4
ERROR Then change the tub or the hose drain.
The laundry is jammed between the gasket and the drum. Rearrange the laundry.
E5 HIGH VOLTAGE
ERROR The PCB ASS’Y is an inferior product. Change the PCB ASS’Y.
The laundry is jammed between the gasket and the drum. Rearrange the laundry.
E6 EMG ERROR The motor is an inferior product. Change the motor.
The PCB ASS’Y is an inferior product. Change the PCB ASS’Y.
The motor is not normally connected. Check the connector of the motor.
MOTOR
E8 ERROR The motor does not work.
Change the motor.
(The motor is an inferior product or broke down.)

E9 SENSOR
The water level sensor is an inferior product. Change the water level sensor.
PRESSURE ERROR

THERMISTOR The thermistor wash is an inferior product or broke down. Change the thermistor wash.
H2
WASH ERROR The thermistor wash is not connected normally. Check the connector of the thermistor wash.

THERMISTOR The heater worked without the water in the tub. Check the water level.
H4 WASH
OVERHEATING
ERROR The thermistor wash is an inferior product or broke down. Change the thermistor wash.

64 TROUBLESHOOTING GUIDE
MESSAGE ERROR CAUSE SOLUTION
WATER TEMP. The water temp. is over 45˚C in delicate & wool course.
H5 Change the thermistor wash.
ERROR (The thermistor wash is an inferior product or broke down.)
HEATER WASH The heater wash dose not work.
H6 ERROR Change the heater wash.
(The water temp. doesn't rise over 2˚C during 15min.)
HEATER
H8 WASH
OVERHEATING The heater worked without the water in the tub. Check the water level and the heater wash.
ERROR
IGBT
lb The PCB ASS’Y is an inferior product. Change the PCB ASS’Y.
ERROR
The drain pump filter is clogged. Clean the drain pump filter.
PUMP FILTER The drain pump does not work during spin. Change the drain pump.
PFE
ERROR The large amount of detergent was used. Use the proper amount of detergent.
The drain hose is placed higher than 1m above the floor. Place the drain hose 1m below the floor.

TROUBLESHOOTING GUIDE 65
 10. WIRING DIAGRAM

66 WIRING DIAGRAM