Scribd Logo
Upload

Welcome to Scribd!

  • 3 views

    JSA Remove Ripper Frame D10T

    Uploaded by

    Indra Setiawan
    1. This document provides a job safety analysis for removing the ripper frame from an excavator. It outlines 5 key steps and associated hazards and control measures. 2. The first step is inspecting the machine and preparing tools. Hazards include pinching hazards and muscle strains, which can be controlled through use of PPE and proper lifting techniques. 3. The second step is removing cylinders, with hazards of spills and contamination. Controls include containment, cleanup, and plugging open lines. 4. The third and fourth steps involve removing the ripper shank/box and frame through proper lifting procedures to prevent injuries. 5. The final step repeats the importance of competent lifting to remove the

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    JSA Remove Ripper Frame D10T

    Uploaded by

    Indra Setiawan
    3 views3 pages
    1. This document provides a job safety analysis for removing the ripper frame from an excavator. It outlines 5 key steps and associated hazards and control measures. 2. The first step is inspecting the machine and preparing tools. Hazards include pinching hazards and muscle strains, which can be controlled through use of PPE and proper lifting techniques. 3. The second step is removing cylinders, with hazards of spills and contamination. Controls include containment, cleanup, and plugging open lines. 4. The third and fourth steps involve removing the ripper shank/box and frame through proper lifting procedures to prevent injuries. 5. The final step repeats the importance of competent lifting to remove the

    Original Description:

    jsa remove ripper

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. This document provides a job safety analysis for removing the ripper frame from an excavator. It outlines 5 key steps and associated hazards and control measures. 2. The first step is inspecting the machine and preparing tools. Hazards include pinching hazards and muscle strains, which can be controlled through use of PPE and proper lifting techniques. 3. The second step is removing cylinders, with hazards of spills and contamination. Controls include containment, cleanup, and plugging open lines. 4. The third and fourth steps involve removing the ripper shank/box and frame through proper lifting procedures to prevent injuries. 5. The final step repeats the importance of competent lifting to remove the

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    3 views3 pages

    JSA Remove Ripper Frame D10T

    Uploaded by

    Indra Setiawan
    1. This document provides a job safety analysis for removing the ripper frame from an excavator. It outlines 5 key steps and associated hazards and control measures. 2. The first step is inspecting the machine and preparing tools. Hazards include pinching hazards and muscle strains, which can be controlled through use of PPE and proper lifting techniques. 3. The second step is removing cylinders, with hazards of spills and contamination. Controls include containment, cleanup, and plugging open lines. 4. The third and fourth steps involve removing the ripper shank/box and frame through proper lifting procedures to prevent injuries. 5. The final step repeats the importance of competent lifting to remove the

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 3

    Nomor Formulir

    SHE.FRM.005.R00
    Form Number

    ANALISIS KESELAMATAN KERJA / JOB SAFETY ANALYSIS


    Nomor Tugas Nama Tugas Remove Ripper Nomor JSA Halaman dari

    Task Number Task Name Frame D10T JSA Number Page of

    Nama Jabatan Nama & Jabatan Supervisor


    Service Technician Mahyudi
    Occupation Title Supervisors Name & Title

    JSA Disusun Oleh Departemen


    Erfan Field Service
    JSA Compiled By Department

    JSA Ditinjau Ulang Oleh Tempat Kerja


    SHE Department Rental Store
    JSA Reviewed By Work Location

    APD yang diperlukan


    Safety Helmet, Safety Shoes, Safety Glass, Safety Shoes
    Required PPE

    No Urutan Dasar Langkah Tugas Tindakan Pengendalian yang Direkomendasikan


    Bahaya Yang Terkait
    Nr(* Maksimum 15 Langkah / Maximum 15 Steps) Recommended Control Measure
    1 REPOSITION MACHINE 1.1 Kesalahan Pengoperasian 1.1.1 Operator harus kompeten & memiliki KIMPER yang berlaku
    WALK ARROUND INSPECTION 1.1.2 Ikuti SOP pengoperasian
    (OPERATE MACHINE BY 1.2 Pergerakan Machine 1.2.1 Perhatikan posisi machine terhadap unit atau struktur lain
    CUSTOMER ) 1.2.2 Operator harus kompeten & memiliki KIMPER yang berlaku
    1.2.3 Mengetahui berat beban yang akan diangkat
    1.2.4 Sesuaikan SWL alat angkat dengan beban pengangkatan
    1.2.5 Periksa perlengkepan angkat sebelum digunakan
    1.2.6 Komponen yang diangkat diikat dengan benar
    1.2.7 Perrhatikan C.O.G komponen yang diangkat
    1.2.8 Bila perlu gunakan tali pandu / tag line
    1.2.9 Perhatikan sudut antar kaki sling (max 120⁰)

    2 PREPARE WORK TOOL 2.1 Tergores atau Terjepit 2.1.1 Hindari potensi bahaya titik jepit pada Toolbox
    Toolbox 2.1.2 Selalu gunakan APD yang sesuai
    2.2 Cidera otot pinggang 2.2.1 Jangan memaksakan mengangkat Toolbox sendirian jika
    dirasa tidak mampu
    2.2.2 Mintalah bantuan dari teman kerja atau rekan kerja yang lain
    2.2.3 Selalu pastikan posisi pengangkatan sudah benar atau
    tumpuan beban pada otot paha

    3 REMOVE ALL CYLINDER 3.1 Tumpahan Limbah B3 3.1.1 Hindari tumpahan oli atau fuel langsung mengenai tanah
    3.1.2 Bila ada tumpahan oli di tanah segera gali tanah hingga
    bersih dari tumpahan oli/fuel
    3.1.3 Pisahkan sampah yang terkontaminasi dengan wadah yang
    berbeda
    3.1.4 Selalu menutup lines yang terbuka dengan cap & plug kit

    Bagian Dari / Part Of:- SHE.SOP.003.R00


    3.2 Kontaminasi pada komponen 3.2.1 Bungkus komponen kritikal menggunakan plastic wraping
    3.2.2 Tutup lubang-lubang yang ada pada komponen untuk
    mencegah masuknya air atau zat kontaminan
    3.3 Pengangkatan Komponen 3.3.1 Operator harus kompeten & memiliki KIMPER yang berlaku
    3.3.2 Mengetahui berat beban yang akan diangkat
    3.3.3 Sesuaikan SWL alat angkat dengan beban pengangkatan
    3.3.4 Periksa perlengkepan angkat sebelum digunakan
    3.3.5 Komponen yang diangkat diikat dengan benar
    3.3.6 Perrhatikan C.O.G komponen yang diangkat
    3.3.7 Bila perlu gunakan tali pandu / tag line
    3.3.8 Perhatikan sudut antar kaki sling (max 120⁰)

    4 REMOVE RIPPER SHANK AND 4.1 Pengangkatan Komponen 4.1.1 Operator harus kompeten & memiliki KIMPER yang berlaku
    RIPPER BOX 4.1.2 Mengetahui berat beban yang akan diangkat
    4.1.3 Sesuaikan SWL alat angkat dengan beban pengangkatan
    4.1.4 Periksa perlengkepan angkat sebelum digunakan
    4.1.5 Komponen yang diangkat diikat dengan benar
    4.1.6 Perrhatikan C.O.G komponen yang diangkat
    4.1.7 Bila perlu gunakan tali pandu / tag line
    4.1.8 Perhatikan sudut antar kaki sling (max 120⁰)

    5 PERFORM REMOVE RIPPER 5.1 Pengangkatan Komponen 5.1.1 Operator harus kompeten & memiliki KIMPER yang berlaku
    FRAME 5.1.2 Mengetahui berat beban yang akan diangkat
    5.1.3 Sesuaikan SWL alat angkat dengan beban pengangkatan
    5.1.4 Periksa perlengkepan angkat sebelum digunakan
    5.1.5 Komponen yang diangkat diikat dengan benar
    5.1.6 Perrhatikan C.O.G komponen yang diangkat
    5.1.7 Bila perlu gunakan tali pandu / tag line
    5.1.8 Perhatikan sudut antar kaki sling (max 120⁰)

    Bagian Dari / Part Of:- SHE.SOP.003.R00


    Bagian Dari / Part Of:- SHE.SOP.003.R00

    You might also like