Scribd
Upload
117 views1 page

Tower-Process-Data-Sheet - Ex (Version 1)

This document is a tower process data sheet for a chemistry engineering job. It provides specifications for a distillation column, including dimensions for 3 sections, operating pressures and temperatures, materials of construction, corrosion allowances, nozzle details, and remarks noting a reference for detailed tray design information. The sheet was issued by Grupo 1, checked by Grupo 10, and approved by CM.

Uploaded by

Abraham Burgos Celis
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
117 views1 page

Tower-Process-Data-Sheet - Ex (Version 1)

This document is a tower process data sheet for a chemistry engineering job. It provides specifications for a distillation column, including dimensions for 3 sections, operating pressures and temperatures, materials of construction, corrosion allowances, nozzle details, and remarks noting a reference for detailed tray design information. The sheet was issued by Grupo 1, checked by Grupo 10, and approved by CM.

Uploaded by

Abraham Burgos Celis
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Made by:

A.K.C.
TECHNOLOGY Job No: 1
TOWER PROCESS DATA SHEET
Date:
Item No: 1
Checked by: Job: chemistry engineering
Sheet __1__ of ___1__
Distribution: Tower Name:
NOTE: * indicates delete as necessary; ** indicates for other than Code reason
1 Section 1 Section 2 Section 3
2 Shell Diameters O.D. - I.D. 7.74 ft 7.74 ft 7.74 ft
Trays Type Sieve Sieve Bubble Cap
3 Number 5 12 13
Spacing 2.00 ft 2.00 ft 2.40 ft
4 Pressure psig Operating 352.3 352.8 352.9
5 *psig / Kscg Design 388
6 Temperature °F Operating -130 -94.88 -73.14
7 *oF / oC Design 140
8 Material Shell SS 304 SS 304 SS 304
9 Trays SS 304 SS 304 SS 304
10 Caps NA NA SS 304
11 Liner or Clad SS 304 SS 304 SS 304
12 Corrosion - Shell 0.12 in 0.12 in 0.12 in
13 Allowance Heads 0.12 in 0.12 in 0.12 in
14 Trays 0.12 in 0.12 in 0.12 in
16 Type of Liquid Flow
18 Joint Efficiency
19 Code Emergency Vac. Design Yes
20 Stress Relieved **Yes / No Radiography **Yes / No
21 Is vessel subject to mechanical vibration *Yes / No
22 Insulation Type: Celular glass
23 *Yes / No
24 Min. Base Elevation: Skirt length:
25 Weight Empty: Full:
26 Nozzles Mark No. Size Number Rating
27 Feed A- 10.00 in 3 400
B- 6.00 in 1 300

28
29 Over'd Vpr. C- 14.00 in .- 300
30
31
32 Bottoms D- 12.00 in 1 300
33 Reboiler Vpr E- 14.00 in 1 300
34 Reboiler liq D- 12.00 in 1 300
35
36
37 Thermocouple F- 300
by inst. Op.

39 Press Gauge G- 2 300


40 Level control H- 2 300
41
42
43
44 Vent I- 3.00 in 300
45 Drain J- 3.00 in 1 300
46 Steam Out K- 2.00 in 1 300
47 Manholes M- 24.00 in 3 300
49 Cap Type: Column Tray Tray Layout Ref:
50 REMARKS
51 1) See Appendix A for detailed information of tray design (Appendix A. C-101.pdf)
52
53
54
55
56
57 Issue No. A Date B Date C Date 0 Date
58 Made by Grupo1 10/17/2020 Grupo 1 11/23/2020
59 Checked by Grupo 10 10/17/2020 Grupo10 11/23/2020
60 Approved by CM 10/17/2020 CM 11/23/2020

You might also like