ELGA Brochure

PURELAB®
Innovation and Flexibility

Lab Water Purification Solutions
for your Research Needs
NEW purelab brochure 2019.indd 1 02/04/2019 13:43

About ELGA
ELGA. The LabWater Specialists
We are the LabWater Specialists. We have been
working with scientists since 1937 to guarantee
ultrapure and pure water for their experiments
and lab work. We resource science and healthcare
markets for a better world by bringing the world’s
leading scientists a critical reagent.
Why choose ELGA as your laboratory water partners?
3 Customer-focused – what we create is for our

customer
Our commitment to developing and providing
you with ultrapure water means that you can
focus and concentrate on obtaining accurate and
reliable results.
3 Innovative – the keystone of our thinking

Our UK R&D facilities are always looking to
provide products dedicated to supplying you
with the right water quality for your application.
3 Sustainable – at the forefront of all of our

activities
Our products are designed to have the lowest
possible impact on the environment at all stages:
manufacture, in service and at end of life. We can
calculate the carbon value of all our products
through their lifetime.
At ELGA we are experienced
3 British Engineered – the standard for all our
in meeting the challenges
products
that arise during the All our systems are manufactured in the UK and
development, installation we are accredited to ISO:9001 and ISO:14001
standards.
and servicing of single
point-of-use purification Our Awards
systems as well as
large projects involving
consultation, consultants
and clients.
2 www.elgalabwater.com

My Water
A trusted brand delivering The Range
you choice
We understand how important it is for scientists to
obtain a choice of water qualities that range from
RO grade for simple routine washing and rinsing,
through to ultrapure water for the most critical
applications.
With this in mind, we have applied our expertise, PURELAB Chorus 1 PURELAB
gained since 1937 in water purification innovation & Halo Dispenser Chorus 1 Complete
to design the unrivalled PURELAB range. Our reliable
water purification systems are constructed from the
highest quality components to ensure optimal
purity, while a rapid and easy sanitization program
contributes towards an uninterrupted workflow.
Built-in economical processes results in the lowest
consumables costs with the highest water quality
and precision.
PURELAB PURELAB
At ELGA we do not speculate or work on Chorus 2+ flex 1 & 2
assumptions about your water quality. On our first
visit to your laboratory we will carry out a test, on
site, that analyzes your feed water quality.
We understand that future needs change and so

we have developed a unique and modular set of
solutions that can grow as you and your lab grow.
You do not need to feel restricted to one solution
for the next 10 years.
PURELAB PURELAB
Chorus 2 & 3 flex 3 & 4
*Type I+ Type I Type II+ Type II Type III
Resistivity Resistivity Resistivity Resistivity

18.2 MΩ.cm >18 MΩ.cm >10 MΩ.cm 1-10 MΩ.cm
Conductivity Conductivity
1-0.1 µS/cm 1-50 µS/cm
PURELAB PURELAB PURELAB PURELAB PURELAB

Chorus 1 Chorus 1 Chorus 2+ Chorus 2 Chorus 3
Complete (RO/EDI/UV) (RO/DI)
PURELAB PURELAB PURELAB PURELAB

flex 1, 2, 3 & 4 Chorus 2+ flex 1 flex 1, 3 & 4
(RO/DI/UV)
*PureSure Technology/In-line filtration/Variety of purification packs
www.elgalabwater.com 3
“
Technologies
The various technologies used in ELGA equipment are able to remove impurities from
water down to extremely low levels; some technologies focus on specific contaminants
while others have a broader spectrum of targets. To achieve the correct water purity for
a particular application, in a cost effective manner, technologies must be arranged in
combination and their operation optimized.
Activated Carbon
Small and large
organic molecules
Contains a maze of tiny pores with sizes ranging from <0.1– 2.9nm
Carbon
Matrix and a surface area of about 1000 square meters per gram. The nature
Pores available
to both small of this surface allows adsorption of organic impurities from the
and large
molecule water and catalytic decomposition of free chlorine and, more slowly,
adsorption
chloramines.
Pores available
only to small
molecule
It is applied in:
adsorbtion
• Pre-treatment cartridges
• Composite Vent filters
• Final Purification cartridges
Microporous Depth Filters
Pre-filtration using microporous depth filters, provides an entrapment/adsorption barrier for the removal
of large suspended particles and some colloids from the water entering the ELGA purification process.
Typically rated at 5 – 10µm and combined with an activated carbon treatment, these filters act to protect
subsequent RO systems from fouling and blockage.
Reverse Osmosis
Reverse osmosis (RO) is a process where pressure is used to push water FEEDWATER
through a membrane filter in a cross-flow fashion. RO-membranes are
extremely fine filters and reject water contaminants that are less than
1nm diameter. Typically >95% of ionic impurity, most organic impurity,
and nearly all particulates, bacteria and bio-molecules are removed
RO MODULE
from the permeate water; these are carried out of the RO module in a
waste or concentrate water stream.
PERMEATE
CONCENTRATE

Technologies
Ion Exchange
Ion exchange resins are often used as part of a final treatment step. Single-use purification packs
typically use a mixture of ion-exchange resins and other media. When used to deionize water, charged
impurities are retained on these resins, while H + and OH - ions (which combine to form water) are
released to replace them. This is a highly efficient process and can remove ions to give product-water
resistivity of up to 18.2 MΩ.cm.
Electrodeionization
Electrodeionization (EDI) combines ion-exchange resins and ion-selective membranes, which are used
to move ionic impurities into a waste or concentrate water stream leaving purified product-water. As
impurities leave via the concentrate water stream, their build-up does not exhaust the resin, and therefore
prolongs resin lifespan. A single EDI unit may operate for many years before a replacement is required.
Typically product water resistivity of >10 MΩ.cm is consistently achieved using this process. This technology
can be used as an alternative to single-use purification cartridges.
Ultraviolet (UV) Light
Treatment of water with UV-C light is used to photo- Water Flow

oxidise organic impurities and/or inactivate micro-
organisms. Photo-oxidation of organic impurities results
in polar or charged species that can subsequently be
removed by ion-exchange processes. Typically the UV
UV Lamp
lamp forms part of a ‘polishing’ treatment loop including

ion-exchange, through which water is repeatedly
Glass Quartz Housing
circulated to maintain quality. Water with Total Organic

Carbon (TOC) of <5ppbC and bacteria at <1CFU/ml can be
achieved in ELGA products that use this approach.
Sub-Micron Filtration
Sub-micron filtration, including micro, ultra-micro and ultra filters (30–3000nm) are used as part of a
‘polishing’ loop or at the point-of-use. Fine filtration is applied to remove bacteria (live or dead) and
biologically active molecules. These absolute filters have pores smaller than their intended target and
can retain the impurity while allowing water to pass through. Impurities that are removed by sub-micron
filtration, include bacteria, colloids, enzymes, endotoxins and particulates.

PURELAB Chorus 1 Life Science | Analytical Research | General Science
Type I+ Water Key Features Ideally suited for:

Liters per day: 3 Real-time TOC • Mass Spectrometry • Molecular Biology
Depends on feedwater • Ion Chromatography • Cell Cultures
3 Fully re-circulating • Ultra trace Analyses • Electrochemistry
18.2 MΩ.cm 3 Integrated filtration • Qualitative Analyses • Immunochemistry
3 Multiple dispensing • Gas Chromatography • Atomic Spectroscopy
3 PureSure technology
Flexible. Configurable. Simple.

Delivering the ultimate in water purity for absolute confidence in your results
When you require the ultimate in water purity, PURELAB Chorus 1 provides the perfect solution.
Consistently delivering water purity of 18.2 MΩ.cm (Type I+/I) and underpinned by the advanced PureSure®
deionization system, the PURELAB Chorus 1 enables you to focus on attaining accurate results while
ensuring an uninterrupted work flow.
Advanced PureSure Deionization

A twin-bed ion-exchange process with inter-stage
resistivity monitoring allows retention of any
impurity released during exhaustion of a primary
cartridge, by the secondary polishing cartridge. This
method gives guaranteed, optimum, product-water
quality, advanced warning of consumable change,
and extended consumable service life.
Primary Polishing
Purification Purification
Pack Pack
Model shown is PURELAB Chorus 1

with Advanced Halo Dispense
Intermediate Output Water
Water Purity Purity Sensor R2
Integrated Filtration
Sensor R1
Ultrafiltration or microfiltration filters out

endotoxins, proteins, nucleases and particulates. Fully Recirculating
Ensuring microbial purity and guaranteeing pure
water at the point-of-use.
Full Spectrum UV Treatment
Data Capture Real-time TOC Monitoring

Provides complete confidence in organic purity.
Data capture via USB for system performance
validation and software updates.

Process Flow PURELAB® Chorus 1 – Ultrapure Water for Analytical Research Applications
Life Science | Analytical Science | General Science PURELAB Chorus 1
Process Flow PURELAB Chorus 1 Analytical Research
Halo Advanced
Dispenser or Halo Flexible Dispenser
Intermediate Post UV Return
Purity Purity
Sensor Sensor
Water Outlet to Water POU Filters

Purity Dispenser Purity (Optional)
Sensor Sensor
Purified Water
Feedwater Outlet
Inlet
(Pre-purified Water) Pump
UV Lamp Ultra
Microfiltration
Primary Polishing
Purification Purification
Pack Pack
Drain
Specifications
APPLICATION LIFE SCIENCE ANALYTICAL RESEARCH GENERAL SCIENCE
Dispense Flowrate Up to 2.0 l/min †
Up to 2.0 l/min †
Up to 2.0 l/min†
TREATED WATER SPECIFICATIONS
Inorganics @25oC 18.2 MΩ.cm 18.2 MΩ.cm 18.2 MΩ.cm

Total organic carbon (TOC) 1-3 ppb* 1-3 ppb* 3-10 ppb*
Bacteria <0.001 CFU/ml ◊
<0.001 CFU/ml ◊
<0.001 CFU/ml◊
Bacterial Endotoxin <0.001 EU/ml <0.001 EU/ml‡ <0.001 EU/ml‡
pH Effectively neutral Effectively neutral Effectively neutral
Particles (filtration) <0.01 μm <0.05 μm 0.2 µm◊
RNase <1 pg/ml <1 pg/ml
DNase <5 pg/ml <5 pg/ml
Purification pack capacity Liters to 18.2 MΩ.cm = 94,100/(μS/cm + (2.3 x ppm CO2))
* Dependant on feed water – recommended feed <50 ppb TOC ◊ With LC134/145/197 POU filter/Biofilter
†
When connected to Halo, Advanced or flexible ‡ With LC197 Biofilter
Source – originally from potable Preferably RO produced by PURELAB Chorus 3 or filtered service deionization (SDI) or
supply, then pretreated distilled. Note: mixed bed or twin bed deionized supplies should be cation limited at
exhaustion
Fouling index (max) 1 for all models. A 5-10 micron membrane prefilter is recommended
for all non-RO feeds
FEEDWATER REQUIREMENT
Service deionization (SDI) – MΩ.cm 1 MΩ.cm minimum resistivity at exhaustion

Reverse Osmosis (RO) – μS/cm Recommended <30 μS/cm
Free Chlorine 0.05 ppm max
TOC <50 ppb max (RO feed)
Carbon dioxide 30 ppm (max recommended)
Silica 2 ppm (max recommended)
Particulates Filtration down to 5-10 micron advisable to protect internal and/or point of use filters
Temperature 1-35oC (Recommend 10-15oC)
Flowrate (maximum requirement) 130 l/hr (34 USG)
Drain requirements Up to 2 l/min (0.5 USG)
Feedwater pressure 0.7 bar (10 psi) maximum; 0.07 bar (1 psi) minimum
* Fit LA652 Pressure Regulator where feedwater pressure exceeds specified limits
Dimensions Height 435mm, Width 375mm, Depth 340mm

Weight 19 kg (42 lbs) 19 kg (42 lbs) 18 kg (40 lbs)

PURELAB Chorus 1 Complete
Type I Water Key Features Ideally suited for:
Liters per day: 3 Tap-to-ultrapure • Mass Spectrometry • Gas Chromatography
Up to 480 3 Fully re-circulating • Molecular Biology • Immunochemistry
18.2 MΩ.cm 3 Integrated filtration • Electrochemistry • General Laboratory
3 Multiple dispensing • Atomic Spectroscopy • Spectrophotometry
• Liquid Chromatography

One complete solution for the laboratory
PURELAB Chorus 1 Complete provides a complete solution from potable tap water supply to ultrapure
water, and is ideal for laboratories needing up to 480 liters of 18.2 MΩ.cm ultrapure water. With its easy to
use ergonomic design, water can be measured and dispensed with confidence directly from the system or
from a choice of additional Halo Dispensers.
Fully Recirculating
Recirculation of purified water through our
modular reservoir to maintain consistent peak
water purity at 18.2 MΩ.cm.
ELGA Biofilter (optional)

When fitted, PURELAB Chorus 1 Complete produces
water which is free from biologically active
impurities.
Single System Solution

Perfect single system solution for analytical and life
science applications requiring 18.2 MΩ.cm.
Reduced Maintenance Times

Quick and easy replacement of consumables as
well as semi-automated sanitization to reduce
maintenance times.
Space Saving Design

Designed to be modular and stackable to save
space, whether wall-mounted or under the bench.
Data Capture Economical

Data capture via USB for system performance Optional CO2 removal from the purified water
validation and software updates. (post RO) increasing the life of downstream
consumables.

Complete

Process Flow
Process PURELAB
Flow for PURELABChorus 1 Complete
Chorus 1 Complete
Water Purity
Sensor
Pump feed from

Outlet Outlet Recirculation Pump Reservoir
Pre-
Treatment
Reverse Degassing
Reverse
Osmosis Osmosis∆ Module*
Outlet to Halo
Temperature Dispenser
Sanitization Sensor (optional)
Port UV and Reservoir
Lamp
Feedwater Water Purity
Inlet Boost
Pump* Sensor
Purification
Pack Dispense
Tap
Drain
*Optional
∆
second RO module for the 20I variant only
Specifications
APPLICATION PURELAB Chorus Complete
Nominal output at 15 C o
10 l/hr 20 l/hr
Dispense Flowrate >1.5 l/min >1.5 l/min
Inorganics @25oC 18.2 MΩ.cm 18.2 MΩ.cm

Total organic carbon (TOC) <5 ppb <5 ppb
Bacteria <0.001 CFU/ml◊ <0.001 CFU/ml◊
Bacterial Endotoxin <0.001 EU/ml‡ <0.001 EU/ml‡
pH Effectively neutral Effectively neutral
Particles (filtration) 0.2 µm! 0.2µm!
Purification pack capacity Liters to 18.2 MΩ.cm = 94,100/(μS/cm + (2.3 x ppm CO2))
◊
With LC134/145/197 POU filter/Biofilter ‡
With LC197 Biofilter ! With LC134/145 POU filter
Source Potable mains water supply
Fouling index (max) <10


Carbon dioxide Ideally <20 ppm
Silica 30 ppm (max recommended)
Drain requirements Up to 2 l/min (0.5 USG)
Feedwater pressure 4.0 bar (60 psi) min; 6 bar (90 psi) max*
With boost pump: flooded suction (min) to 2.0 bar (30 psi) max
Weight (with boost pump) 17 kg (38 lbs) 18 kg (40 lbs)
Weight 15 kg (33 lbs) 16 kg (36 lbs)

PURELAB Chorus 2+ (RO/EDI/UV)
Type II+ Water Key Features Ideally suited for:

Liters per day: 3 Tap to Type II • Electrochemistry • Feed to Ultrapure Water
Up to 460 3 Fully re-circulating • Cell Culture • Media / Buffer Preparation
>10 MΩ.cm 3 Multiple dispensing • Spectrophotometry • General Chemistry

PURELAB Chorus 2+ (RO/EDI/UV) features our patented recirculating EDI technology: the only EDI system on
the market that is able to fully recirculate to achieve >10 MΩ.cm.
The PURELAB Chorus 2+ provides additional bacteria and inorganic quality for sensitive analytical and life
science applications above that of basic laboratory work. With its simple design and ease of use, water can
be measured and dispensed with confidence from the system or from a choice of additional Halo Dispensers.
Fully Recirculating EDI

ELGA’s patented fully recirculated EDI provides a
constant supply of high purity that guarantees a
minimum of 10 MΩ.cm water at all times.
Ideal for High Volume Labs

A cost-effective solution for laboratories requiring
higher output volumes thanks to the incorporated
EDI technology.
Single System Solution

Perfect single system solution for analytical and life
science applications.

maintenance times.
Space Saving Design

Designed to be modular and stackable to save
space, whether wall-mounted or *under the bench.
Economical Data Capture

Optional CO2 removal from the purified water Data capture via USB for system performance
(post RO) increasing the life of downstream validation and software updates.
consumables.
*If fitted with Halo dispenser

(RO/EDI/UV) PURELAB Chorus 2+
Process Flow PURELAB Chorus 2+ (RO/EDI/UV)
Process Flow PURELAB® Chorus 2+ (RO/EDI/UV)
Water Purity Degassing

Sensor Module*
Pump feed from

Recirculation Pump Reservoir
Outlet Outlet
Pre-
Treatment
EDI Module
Reverse Reverse Optimizer
Osmosis Osmosis∆ Cartridge
Outlet to Halo
Temperature Dispense Dispenser
Sensor Tap (optional)
Boost
Pump* UV and Reservoir
Lamp
Feedwater Sanitization Water Purity
Inlet Port Sensor
Flow
Sensor
*Optional Drain Drain

∆
Specifications
APPLICATION PURELAB Chorus 2+ (RO/EDI/UV)
Nominal output at 15oC 10 l/hr* 20 l/hr*
Nominal daily output 216 l/day 216 l/day

Inorganics @25oC 10 to >15 MΩ.cm
Organics (MW>200 Dalton) >99% rejection
Total organic carbon (TOC) <10 ppb
Bacteria <0.001 CFU/ml◊
pH Effectively neutral
Particles (filtration) 0.2µm!
* Standard conditions are 4 bar inlet pressure at 15oC, fed with potable water and a clean pre-treatment cartridge. Refer to flow
tables outside these conditions. ! With LC134/145 POU Filter
Conductivity <1400 μS/cm
Heavy Metals (max) 0.05 ppm

Silica 30 ppm
Temperature 1-35oC
Drain requirements 80 l/hr (21 USG)
*Fit LA652 Regulator where feedwater pressure exceeds specified limits
Weight 18 kg (40 lbs) 19kg (42 lbs)

PURELAB Chorus 2+ (RO/DI/UV)
Type II+ water Key Features Ideally suited for:

Liters per day: 3 Tap-to-Type II • Electrochemistry • Media / Buffer Preparation
Up to 480 3 Fully re-circulating • Spectrophotometry • General Chemistry
>10 MΩ.cm 3 Multiple dispensing • Feed to Ultrapure Water • Cell Culture

PURELAB Chorus 2+(RO/DI/UV) provides pure water (Type II+) from potable tap water supply for laboratories
requiring up to 480 liters per day and is able to fully recirculate to achieve >10 MΩ.cm at all times. It
provides additional bacteria and inorganic quality for sensitive analytical and life science applications above
that of basic laboratory work. With its simple design and ease of use, water can be measured and dispensed
with confidence from the system or from a choice of additional Halo Dispensers.
Fully Recirculating
In addition to simple composite vent filtration, the
PURELAB Chorus 2+ is the only fully recirculating Type
II+ pure water system on the market, maintaining
consistent peak water purity at >10MΩ.cm.
Configuration
Ability to configure multiple systems to increase
flow rate and save space through stackable solutions
that can be wall mounted, on or *under the bench.

maintenance time.
Data Capture
Economical
Optional CO2 removal from the purified water (post
RO) increasing the life of downstream consumables.
*If fitted with Halo dispenser

(RO/DI/UV) PURELAB Chorus 2+
Process Flow
Process PURELAB
Flow Chorus
PURELAB® Chorus 2+ (RO/DI/UV)
2 (RO/DI/UV) +
Water Purity
Sensor
Pump feed from

Outlet Outlet Recirculation Pump Reservoir
Pre-
Treatment
Degassing
Reverse Reverse
Osmosis Osmosis∆ Module*
Outlet to Halo
Temperature Dispenser
Sanitization Sensor (optional)
Port and Reservoir
Feedwater Water Purity

Inlet Boost Sensor
Pump*
UV
Purification
Pack Lamp Dispense
Tap
Drain
*Optional
∆
Specifications
APPLICATION PURELAB Chorus 2+ (RO/DI/UV)
Nominal output at 15oC 10 l/hr* 20 l/hr*
Nominal daily output 240 l/day 480 l/day

Inorganics @25oC 1 to >15 MΩ.cm
Organics (MW>200 Dalton) >99% rejection
Total organic carbon (TOC) <10 ppb
Bacteria <0.001 CFU/ml◊
pH Effectively neutral
Particles (filtration) 0.2µm◊
Purification pack capacity Liters to 15 MΩ.cm = 74,700/(μS/cm + (2.3 x ppm CO2))
* Standard conditions are 4 bar inlet pressure at 15oC, fed with potable water and a clean pre-treatment cartridge.
Refer to flow tables outside these conditions. ◊ With LC134/145 POU filter

Conductivity <2000 μS/cm
Heavy Metals (max) 0.05 ppm
Silica 30 ppm
Temperature 1-35oC
Drain requirements 80 l/hr (21 USG)
*Fit LA652 Regulator where feedwater pressure exceeds specified limits
Weight 15 kg (33 lbs) 16kg (35 lbs)

Halo Dispense Solutions
The Halo Dispenser offers dispensing and
monitoring solutions to customers enabling the
ultimate flexibility when using PURELAB Chorus 1,
Chorus 1 Complete & Chorus 2+.
A choice of three dispensing solutions is available
to suit different applications, budget and
configuration. With Halo Dispenser you have the Halo Flexible
ultimate flexibility. Halo Advanced Dispenser
Dispenser
Clear Display Halo Dispenser
Prioritized information displayed at all times Fixed Fixed Flexible

(system status, alarm) for absolute confidence as
you dispense. 3 Variable flow rate dispense
3 Drop-by-drop control
Multiple Positioning 3 Locked dispense
Position the dispenser independent from the water 3 Purity monitoring to point-of-use
purification system. Optimize your lab space. 3 Auto volume dispense
3 Profile dispense
Flexible Dispensing
3 Flexible handset
3 Variable flow
3 Auto-volume dispense
3 Hands free
3 Locked dispense
3 Hand-held dispensing
3 Profile dispense
Halo Glow
The unique glow changes colour and flashes
alerting you to changes in system performance.
Real-Time TOC Monitoring*

Water purity is monitored right up to the point of
use for complete peace of mind with real-time TOC
monitoring for critical applications.
* Only on PURELAB Chorus 1

(RO/DI) PURELAB Chorus 2
Type II Key Features Ideally suited for:
Liters per day: Up to 480 3 Easy configurability • Stills Replacement • General Chemistry
10 MΩ.cm 3 Modular • Buffer Preparation • Hydroponics
• pH solution Preparation • Steam Generators
• Washing / Rinsing • Sterilizer Feed
• Autoclaves • Feed to Type I Polishers
Modular. Flexible. Reliable.

Reliable delivery of Type II water purity
When Type II water is all you need, then PURELAB Chorus 2 (RO/DI) is the reliable solution with the
flexibility to suit your requirements. It dispenses up to 480 liters of pure water per day from a potable
water supply for general laboratory applications.
Economical
Option to reduce water consumption for low
hardness feed waters.
Modular
Multiple PURELAB Chorus 2 units can feed into
one reservoir and systems can be expanded
post-installation. As such, the cost of future
upgrades is minimized. Duplex systems also
guarantee maximum uptime.
Data Capture
Deionization
The Reverse Osmosis feed contains optimized resin
mixes to maximize consumables capacity. Reduced Maintenance Times
Quick and easy replacement of consumables as well
as simple sanitization to reduce maintenance time.
Simplicity
Simple to install, operate and maintain with
prioritized information displayed at all times
you dispense.

PURELAB Chorus 3 (RO)
Type III water Key Features Ideally suited for:

Liters per day: 3 Easy Configurability • Buffer Preparation • Hydroponics
Up to 720 3 Auto rinse • Washing / Rinsing • Steam Generators
RO water 3 Modular • Autoclaves • Sterilizer Feed
• General Chemistry • Feed to Type I polishers
Modular. Flexible. Reliable.

Reliable delivery of Type III water purity
When general laboratory grade water is all you need, then PURELAB Chorus 3 is the reliable solution
with the flexibility to suit your requirements. It can also be used as a feed to other ELGA water systems.
Economical
Option to reduce water consumption for low
hardness feed waters.
Modular
Multiple PURELAB Chorus 3 units can feed into
one reservoir and systems can be expanded post-
installation. As such, the cost of future upgrades
is minimized. Duplex systems also guarantee
maximum uptime.
Data Capture
Configuration
Ability to configure multiple systems to increase
flow rate. Quick and easy replacement of consumables as
maintenance time.
Simplicity
you dispense.
Auto Rinse
Maintains purity of water during periods of low use.

Process Flow PURELAB® Chorus 2 (RO/DI) – Pure Water for General Laboratory Applications
PURELAB Chorus 2 & 3
Process Flow PURELAB Chorus 2 (RO/DI)
Degassing
Module
(optional)
Outlet to
Water Storage
Outlet Purity Reservoir
Outlet Sensor
Pre-
Treatment
Reverse Reverse
Osmosis
Process Flow PURELAB®
Osmosis Chorus 3 (RO) – General Grade Water for Laboratory Applications
Process Flow PURELAB Chorus 3 (RO)

Purification
Pack
Feedwater Boost Pump
Inlet
Degassing
Module
(optional)
Drain
Outlet to
Quantity of Reverse Osmosis Outlet Outlet Outlet Storage
Water Reservoir
Pre-
Modules dependent on Treatment Purity
Sensor
Chorus Model. Reverse
Osmosis
Reverse
Osmosis
Reverse
Osmosis
Feedwater Boost Pump

Inlet (optional)
Drain
Specifications
APPLICATION PURELAB Chorus 2 (RO/DI) PURELAB Chorus 3 (RO)
Nominal output at 15oC 10 l/hr 20 l/hr 10 l/hr 20 l/hr 30 l/hr
Nominal daily output 240 l/day 480 l/day 240 l/day 480 l/day 720 l/day
Inorganics @25oC 1 to >10 MΩ.cm >95% rejection
Organics (MW>200 Dalton) >99% rejection >95% rejection
Total organic carbon (TOC) <30 ppb <50 ppb
Bacteria* <5 CFU/ml <50 CFU/ml
pH Effectively neutral Effectively neutral
Particles >99% rejection >99% rejection
Purification pack capacity Liters to 1MΩ.cm = 103,200/(μS/cm N/A
+ (2.3 x ppm CO2))
Standard conditions are 4 bar inlet pressure at 15oC, fed with potable water and a clean pre-treatment cartridge.
Refer to flow tables outside these conditions. * Bacterial specification is before the water goes into the reservoir
Source – originally from potable Potable mains water supply Potable mains water supply
supply, then pretreated
Fouling index (max) 10 10
Conductivity <2000 μS/cm <2000 μS/cm

Free Chlorine 0.5 ppm max 0.5 ppm max
Heavy Metals (max) 0.05 ppm 0.05 ppm
Silica 30 ppm 30 ppm
Temperature 1-35 C o
1-35oC
Flowrate (maximum requirement) 100 l/hr (27 USG) 100 l/hr (27 USG)
Drain requirements 80 l/hr (21 USG) 80 l/hr (21 USG)
Feedwater pressure 2.0 bar (30 psi) maximum; 2.0 bar (30 psi) maximum;
0.5 bar (7.5 psi) minimum** 0.5 bar (7.5 psi) minimum**
**Fit LA652 Regulator where feedwater pressure exceeds specified limits
Weight (with boost pump) 19 kg (42lb) 20 kg (44 lbs) 17 kg (37 lbs) 18 kg (40 lbs) 19 kg (42lb)
Weight 17 kg (37 lbs) 18 kg (40 lbs) 15 kg (33 lbs) 16 kg (35 lbs) 17 kg(37 lbs)

Storage Reservoirs
Our unique range of storage solutions are designed
to maintain optimum purity of stored water and
provide effective protection against airborne
contaminants.
They are designed to accommodate PURELAB
Chorus water purification systems by maximizing
the space in a single integral, compact unit or to sit
independently to suit the layout of your laboratory.
Multiple positioning Auto fill

Multiple positioning / mounting options to suit Monitoring of reservoir water levels with
your laboratory layout. automated refill ensures purified water is always
available.
Polyethylene construction
Inert opaque polyethylene construction with Hygienic Overflow
smooth inner surface. Hygienic overflow in the unlikely event of water
system malfunction.
Dispense tap
Positioned to minimize accidental operation or Easy display
damage (choice of positions). Direct display of stored purified water on the front
of the reservoir for easy identification.
Advanced vent filtration
Prevents the ingress of airborne bacteria,
particulates, organic vapours and CO2. 450±4
203±2
203±2
203±2
260±2
Capacity: 15 liters Capacity: 30 liters Capacity: 60 liters Capacity: 100 liters

Dimensions (mm): Dimensions (mm): Dimensions (mm): Dimensions (mm):
470 (h) x 376 (w) x 340 (d) 660 (h) x 376 (w) x 340 (d) 570 (h) x 532 (w) x 522 (d) 806 (h) x 532 (w) x 522 (d)
Flow Rate: 6 l/min Flow Rate: 8 l/min Flow Rate: 10 l/min Flow Rate: 10 l/min

Dispenser PURELAB flex 1
Type I, II & III dependent Key Features Ideally suited for:
on use of DI pack
3 Flexible dispensing • General Lab
Liters per day: 3 Customise settings • Type II Applications
Dependent on feed
3 Fully re-circulating • Dispensing with DI pack
water
3 Integrated filtration
Simplicity and Elegance.

The best dispenser for your distribution system
The PURELAB flex 1 is designed as a dispensing and monitoring system when connected to a reservoir
or distribution loop. It also works as a simple deionization system.
Customized Settings
Be in control of your PURELAB flex by customizing
the settings to suit your application.
Simplicity
you dispense.
Easy to Use
Ergonomic design with features including auto
volumetric dispense and height adjustability.
Data Capture
validation and software updates
Space Saving
Space saving and compact dispenser which can be
placed on the bench or wall mounted

PURELAB flex 2 Polisher
Type I water Key Features Ideally suited for:

Liters per day: 3 Real-time TOC • Mass Spectrometry • Gas Chromatography
Dependent on 3 Fully re-circulating • Molecular Biology • Immunochemistry
feedwater • Electrochemistry • Spectrophotometry
3 Customize settings
18.2 MΩ.cm 3 Integrated filtration • Atomic Spectroscopy • Media / Buffer Prep
3 Adjustable dispensing • Liquid Chromatography • General Chemistry
Designed for the laboratory of today.

Reliable delivery of Type I water purity
The PURELAB flex is designed to deliver accuracy, flexibility and ease-of-use. The award winning system
produces ultrapure type I (18.2 MΩ.cm) water from a pre-purified feed, which is ideal for analytical and life
science applications. It allows focus on routine test work without concern about the water quality affecting
test results.
Guaranteed Water Purity

Full recirculation through the UV lamp and
purification pack right to the point of use for peace
of mind.
Intuitive Flexible Dispense

Clear water purity display for absolute confidence
as you dispense.
Real-time TOC Monitoring

Provides complete confidence in organic purity
by reducing the level of organics for critical
applications.
Easy To Maintain
Easy access to the consumables as well as well as
quick easy automated sanitization to minimize
downtime.
Data Capture
Space Saving
Space saving and compact dispenser which can be
placed on the bench or wall mounted.

Polisher PURELAB flex 1 & 2
Process Flow PURELAB® flex 2
Process Flow PURELAB flex 2
Water Purity
Sensor
Water
Purity and
Purification Temperature Dispense
UV Lamp Pack Sensor Handset
Feedwater 0.2µm Point

Inlet of Use Filter
Water Purity and
(Pre-purified or Biofilter
Temperature
Water) (optional)
Sensor
Recirculation
Pump
Specifications
APPLICATION PURELAB flex 1 PURELAB flex 1 (with PURELAB flex 2
purification pack)
Daily volume >10 liters >10 liters >10 liters

Dispense Flowrate Up to 2.0 l/min Up to 2.0 l/min Up to 2.0 l/min
Inorganics @25 C o
As per feedwater 18.2 MΩ.cm 18.2 MΩ.cm
Total organic carbon (TOC) Dependent on feedwater
<0.1 CFU/ml◊ <0.001 CFU/ml◊1
Bacterial Endotoxin N/A <0.001 EU/ml‡ <0.001 EU/ml‡
RNase N/A N/A <1 pg/ml
DNase N/A N/A <5 pg/ml
◊
With C134/145/197 POU filter/Biofilter ‡ With LC197 Biofilter 1 Dependent on feedwater
Source Originally from potable supply, then pretreated. Preferably reverse osmosis (RO) or
filtered service deionization (SDI) or distilled.
Fouling index (max) <1 for all models
Free Chlorine <0.05 ppm max
TOC N/A
Carbon dioxide <0.1 ppm
Silica <2 ppm
Particulates 5-10 µm
Flowrate (maximum requirement) >2 l/min (0.5 USG)
Drain requirements None required
Feedwater pressure 1.5 bar (22 psi) maximum; Flooded suction minimum
Dimensions Height 900-1020mm, Width 236mm, Depth 374mm
Weight 10 kg (22 lbs) 10.5 kg (23.1 lbs) 11 kg (24.2 lbs)
Installation Bench / wall

PURELAB flex 3 Tap-to-Ultrapure

Liters per day: < 10 3 Real-time TOC • Mass Spectrometry • Gas Chromatography
18.2 MΩ.cm 3 Fully re-circulating • Molecular Biology • Immunochemistry
3 Integrated filtration • Electrochemistry • Spectrophotometry
3 Adjustable dispensing • Atomic Spectroscopy • Media / Buffer Prep
• Liquid Chromatography • General Chemistry
• Cell Culture
Power and flexibility.

A small unit with big power capabilities
The PURELAB flex 3 is the ultimate system providing Type 1 (ultrapure water) from potable tap water
in one single unit.
Space Saving Design

The compact unit can be placed on the bench or
can be wall mounted and has an integrated 7 liter
reservoir filled by a 10 l/hr RO membrane, ensuring
that water is always available.
Fully Recirculating
Ensuring the highest microbial purity and
guaranteeing pure water, as recirculation of the
water occurs from the reservoir right to the point-
of-use.

Provides complete confidence in organic purity and
clear display at all times. The final quality sensor is
placed at the entry of the flexible dispenser giving
you peace of mind.
Flexible Dispenser
The intuitive dispenser offers a clear display of
the water purity for absolute confidence as you
dispense.
Simplicity
Simple to install, operate and with a quick semi-
automated sanitization to minimize downtime.
Data Capture

Portable System PURELAB flex 4
Liters per day: < 10 3 Real-time TOC • Mass Spectrometry • Gas Chromatography
3 Fully re-circulating • Molecular Biology • Immunochemistry
18.2 MΩ.cm
• Electrochemistry • Spectrophotometry
3 Integrated filtration
• Atomic Spectroscopy • Media / Buffer Prep
3 Adjustable dispensing
• Liquid Chromatography • General Chemistry
• Cell Culture
Flexible elegance.
An independent system
PURELAB flex 4 produces ultrapure (Type I) water from pre-purified water, with its manual-filling
capability, it is able operate independently from a fixed water source in temporary locations. It has an
integrated 7 liter reservoir, ensuring that water is always available and is particularly suited for small
volumes of water where TOC levels are critical and must remain stable.
Space Saving Design

The compact unit can be placed on the bench or can be
wall mounted and has an integrated 7 liter reservoir,
ensuring that water is always available.
Fully Recirculating
Ensuring the highest microbial purity and guaranteeing
pure water, as recirculation of the water occurs from the
reservoir right to the point-of-use.
Portable System
Access on the top of the system gives the option to fill the
reservoir with pre-purified water. This means that it can
be moved at any time as the lab environment evolves.

Provides complete confidence in organic purity and clear
display at all times.
Flexible Dispenser
The intuitive dispenser offers a clear display of the water
purity for absolute confidence as you dispense.
Simplicity
Simple to install, operate and with a quick semi-
automated sanitization to minimize downtime.
Data Capture
Data capture via USB for system performance validation
and software updates.

PURELAB flex 3 & 4
Process Flow PURELAB flex 3 Process Flow PURELAB flex 4
Process Flow PURELAB® flex 3 Process Flow PURELAB flex 4
Water Purity Water Purity

Sensor Sensor
Reverse
Osmosis CVF Composite
Vent Filter CVF Composite
Purification Vent Filter
Reservoir UV Lamp Pack 185/254 nm Purification
Reservoir UV Lamp Pack
Dispense Handset
Water Purity and Dispense Handset
0.2µm Point of
Temperature Use Filter or Water Purity and
Sensor 0.2µm Point of
Biofilter Temperature Use Filter or
(optional) Sensor Biofilter (option-
Feedwater al)
Inlet Feedwater
Manual Recirculation Water Purity and Inlet
Outlet Pump Temperature (Pre-purified
Sensor Water) Manual Recirculation Water Purity and
Outlet Pump Temperature
Sensor
Specifications
APPLICATION PURELAB flex 3 PURELAB flex 4
Daily volume <10 liters <10 liters
Dispense Flowrate Up to 2.0 l/min Up to 2.0 l/min

Reverse osmosis make up flow rate at 15oC 10 l/hour N/A
Inorganics @25oC 18.2 MΩ.cm 18.2 MΩ.cm
Total organic carbon (TOC) <5 ppb <5 ppb*
<0.001 CFU/ml◊
Bacterial Endotoxin <0.001 EU/ml‡ <0.001 EU/ml‡
* Dependant on feed water With C134/145/197 POU filter/Biofilter With LC197 Biofilter
◊ ‡
Source Potable tap water Originally from potable supply,

then pretreated. Preferably
reverse osmosis (RO) or
filtered service deionization
(SDI) or distilled.
Fouling index (max) <10 <1
Free Chlorine <0.5 ppm max <0.05 ppm max

TOC <2 ppm <50 ppb recommended
Carbon dioxide <30 ppm (recommended <20 ppm)
Silica (recommended max) <30 ppm <2 ppm
Particulates - 5-10μm
Flowrate (maximum requirement) Up to 75 l/hr (20 USG) Up to 75 l/hr (20 USG)
Drain requirements <90 l/hr (23 USG) <70 l/hr (18 USG)
Feedwater pressure 6 bar (90 psi) max; 2 bar 6 bar (90 psi) max; 0.07 bar
(30 psi) min (1 psi) min
Dimensions Height 900-1020mm, Width 236mm, Depth 470mm
Weight 23 kg (57.3 lbs) 23 kg (57.3 lbs)
Installation Bench / wall

Find your product
PURELAB Chorus 1 PURELAB Chorus 2 & 3 PURELAB flex

`
Analytical Research
General Science
2+ (RO/EDI/UV)
2+ (RO/DI/UV)
Life Science
Complete
2 (RO/DI)
3 (RO)
flex 1
flex 2
flex 3
flex 4
Water Type
Ultrapure Type I 3 3 3 3 3# 3 3 3
Pure Type II 3 3 3 3*
RO Type III 3 3* 3 3
Impurities to remove
Nucleases 3 3 3 3 3 3 3 3 3
Endotoxins / Pyrogens 3 3◊ 3◊ 3◊ 3◊ 3◊ 3◊ 3◊
Inorganics 3 3 3 3 3 3 3 3 3 3 3 3
Organics 3 3 3 3 3 3 3 3 3 3 3 3
Bacteria 3 3 3 3 3 3 3 3 3∆ 3 3 3
Particulates 3 3 3∆ 3 3 3 3 3 3∆ 3∆ 3~ 3~
Features
PureSure® 3 3 3
Real time TOC monitoring 3 3 3 3
Potable tap water 3 3 3 3 3
Wall mounting 3 3 3 3 3 3 3 3 3 3 3 3
Floor mounting 3 3 3 3 3 3 3 3
Purity monitoring to POU 3 3 3 3 3 3 3 3 3 3
Halo Dispense compatible 3 3 3 3 3 3
Auto Volume Dispense 3† 3† 3† 3† 3† 3† 3 3 3 3
Variable flow rate

3† 3† 3† 3† 3† 3† 3 3 3 3
dispense
Drop-by-drop control 3† 3† 3† 3† 3† 3† 3 3 3 3
Locked dispense 3† 3† 3† 3† 3† 3† 3 3 3 3
USB connection 3 3 3 3 3 3 3 3 3 3 3 3
Full product validation 3 3 3 3 3 3 3 3 3 3 3 3
#
With DI cartridge * No DI cartridge ◊ With LC197 POU filter ∆
With LC134/145 POU filter ~ 0.2mm † When fitted with a Halo dispenser solution

Find your product
PURELAB Chorus 1 PURELAB Chorus 2 & 3 PURELAB flex

`
Analytical Research
General Science
2+ (RO/EDI/UV)
2+ (RO/DI/UV)
Life Science
Complete
2 (RO/DI)
3 (RO)
flex 1
flex 2
flex 3
flex 4
Ideal solution for
Systems also have wider applicability. Speak to your local ELGA specialist for further information.
Cell culture 3 3 3∆ 3∆ 3∆
Liquid Chromatography
3 3 3 3 3 3
(HPLC, UHPLC)
Microbiological Analysis 3 3 3 3 3 3
Genetic (PCR, DNA/RNA

sequencing, DNA, Nucleic 3
acid)
Gas Chromatography 3 3 3 3 3
Electrochemistry 3 3 3 3 3 3 3 3
Immunochemistry 3 3 3 3 3
Atomic Spectroscopy
(Flame AA, GFAA, 3 3 3 3 3 3
ICP-AE)
Mass Spectrometry
3 3 3 3 3 3
(ICP-MS, GC-MS, LC-MS)
General lab water

requirement (glassware
3 3 3 3* 3
washing, heating baths,
autoclave filling)
Spectrophotometry (inc.
3 3 3 3 3 3
UV, IR, nearUV, nearIR)
Feed to ultrapure water

3 3 3 3
system
Media / buffer
preparation 3 3 3
(inc pH solution)
General chemistry
3 3 3 3 3 3 3 3 3 3
(inc Titrimetry)

Product part numbers
PURELAB Chorus 1
Part Number Description
PC1ANRXM2 PURELAB Chorus 1 Analytic Research Ultrapure System
PC1LSCXM2 PURELAB Chorus 1 Life Science Ultrapure System
PC1GSCXM2 PURELAB Chorus 1 General Science Ultrapure System
Unit is supplied as standard with: Fitted / Included: Appropriate consumables (including 2 x LC232 - see list below), MANU39998/MANU39997/MANU40001 Operator
Manual, GUID39864 Light Guide, GUID40005 Quick Reference Guide, INST40012 Quick Start Guide, LA762 basic installation kit, LC233 x 2 bypass block.

PC110COXXM1 PURELAB Chorus 1 Complete 10 l/hr System
PC110COBPM1 PURELAB Chorus 1 Complete 10 l/hr System with Boost Pump
PC120COXXM1 PURELAB Chorus 1 Complete 20 l/hr System
PC120COBPM1 PURELAB Chorus 1 Complete 20 l/hr System with Boost Pump
Unit is supplied as standard with: Fitted / Included: Appropriate quantity LC240, 1 x LC241, 1 x LC275, 1 x LC272, 1 x LC210, MANU40932
Operator Manual, GUID39864 Light Guide, LA762 Basic installation Kit.
PURELAB Chorus 2+ RO/EDI/UV

PC210EUXXM1 PURELAB Chorus 2+ RO/EDI/UV 10 l/hr System
PC210EUBPM1 PURELAB Chorus 2+ RO/EDI/UV 10 l/hr System with Boost Pump
PC220EUXXM1 PURELAB Chorus 2+ RO/EDI/UV 20 l/hr System
PC220EUBPM1 PURELAB Chorus 2+ RO/EDI/UV 20 l/hr System with Boost Pump
Unit is supplied as standard with: Fitted / Included: Appropriate quantity LC240, 1 x LC241,1 x LC243, 1 x LC277, 1 x LC285, 1 x LC233,
MANU40932 Operator Manual, GUID39864 Light Guide, LA762 Basic installation Kit
PURELAB Chorus 2+ RO/DI/UV

PC210DUXXM1 PURELAB Chorus 2+ RO/DI/UV 10 l/hr System
PC210DUBPM1 PURELAB Chorus 2+ RO/DI/UV 10 l/hr System with Boost Pump
PC220DUXXM1 PURELAB Chorus 2+ RO/DI/UV 20 l/hr System
PC220DUBPM1 PURELAB Chorus 2+ RO/DI/UV 20 l/hr System with Boost Pump
Unit is supplied as standard with: Fitted / Included: Appropriate quantity LC240, 1 x LC241, 1 x LC272, 1 x LC274, 1 x LC285, MANU40932
Operator Manual, GUID39864 Light Guide, LA762 Basic installation Kit.
PURELAB Chorus Halo Dispensers

LA754 Halo Dispenser
LA755 Advanced Halo Dispenser
LA56 Flexible Dispenser
Each supplied with GUID40007 or GUID40006 Quick Reference Guide, INST40011 or INST40013 Quick Start Guide,
LA774 Installation Kit (plus for LA756: MANU40002 Operator manual)
PURELAB Chorus 2 RO/DI

PC210DIXXM3 PURELAB Chorus 2 RO/DI 10 l/hr System
PC210DIBPM3 PURELAB Chorus 2 RO/DI 10 l/hr System with Boost Pump
PC220DIXXM3 PURELAB Chorus 2 RO/DI 20 l/hr System
PC220DIBPM3 PURELAB Chorus 2 RO/DI 20 l/hr System with Boost Pump
Unit is supplied as standard with: Fitted / Included: Appropriate quantity LC240 RO, 1 x LC241, 1 x LC234, MANU40003, Operator Manual, GUID39864
Light Guide, GUID40005 Quick Reference Guide, INST40009 Quick Start Guide, LA762 basic installation kit, LC233 bypass block
PURELAB Chorus 3
RO310XXM3 PURELAB Chorus 3 RO 10 l/hr
RO310BPM3 PURELAB Chorus 3 RO 10 l/hr with Boost Pump
Unit is supplied as standard with: Fitted / Included: Appropriate quantity LC240 RO, 1 x LC241, GUID39864 Light Guide, GUID40004
Quick Reference Guide, INST40008 Quick Start Guide, LA762 basic installation kit
PURELAB Chorus Reservoirs

LA757 15 Liter Reservoir
Each reservoir supplied with LA773 Installation Kit & LC216 Composite Vent Filter
PURELAB flex
PF1XXXXM1 PURELAB flex 1 (optional Purification Pack)
PF2XXXXM1 PURELAB flex 2 (Purification Pack + UV + TOC)
PF3XXXXM1 PURELAB flex 3
Unit is supplied as standard with: All units: Quick Reference Guide & user manual, certificate of conformity, bypass pack.
Flex 2: 1 x LC210. Flex 3 & 5: 1 x LC217, 1 x LC210, 1 x LC216. Flex 4 & 6: 1 x LC210, 1 x LC216.

ELGA Brochure

Uploaded by

Copyright:

Available Formats

ELGA Brochure

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

ELGA Brochure

Uploaded by

Copyright:

Available Formats

PURELAB®

Innovation and Flexibility

NEW purelab brochure 2019.indd 1 02/04/2019 13:43

3 Customer-focused – what we create is for our

3 Innovative – the keystone of our thinking

3 Sustainable – at the forefront of all of our

NEW purelab brochure 2019.indd 2 02/04/2019 13:43

We understand that future needs change and so

*Type I+ Type I Type II+ Type II Type III

Resistivity Resistivity Resistivity Resistivity

PURELAB PURELAB PURELAB PURELAB PURELAB

PURELAB PURELAB PURELAB PURELAB

*PureSure Technology/In-line filtration/Variety of purification packs

Microporous Depth Filters

NEW purelab brochure 2019.indd 4 02/04/2019 13:43

Ultraviolet (UV) Light

Treatment of water with UV-C light is used to photo- Water Flow

lamp forms part of a ‘polishing’ treatment loop including

circulated to maintain quality. Water with Total Organic

NEW purelab brochure 2019.indd 5 02/04/2019 13:43

Type I+ Water Key Features Ideally suited for:

Flexible. Configurable. Simple.

Advanced PureSure Deionization

Model shown is PURELAB Chorus 1

Ultrafiltration or microfiltration filters out

Data Capture Real-time TOC Monitoring

NEW purelab brochure 2019.indd 6 02/04/2019 13:43

Water Outlet to Water POU Filters

Inorganics @25oC 18.2 MΩ.cm 18.2 MΩ.cm 18.2 MΩ.cm

Service deionization (SDI) – MΩ.cm 1 MΩ.cm minimum resistivity at exhaustion

Dimensions Height 435mm, Width 375mm, Depth 340mm

NEW purelab brochure 2019.indd 7 02/04/2019 13:43

Flexible. Configurable. Simple.

ELGA Biofilter (optional)

Single System Solution

Reduced Maintenance Times

Space Saving Design

Data Capture Economical

NEW purelab brochure 2019.indd 8 02/04/2019 13:43

PURELAB Chorus 1 Complete

Pump feed from

Inorganics @25oC 18.2 MΩ.cm 18.2 MΩ.cm

Source Potable mains water supply

Fouling index (max) <10

Free Chlorine 0.5 ppm max

NEW purelab brochure 2019.indd 9 02/04/2019 13:43

Type II+ Water Key Features Ideally suited for:

Flexible. Configurable. Simple.

Fully Recirculating EDI

Ideal for High Volume Labs

Single System Solution

Reduced Maintenance Times

Space Saving Design

Economical Data Capture

NEW purelab brochure 2019.indd 10 02/04/2019 13:43

Water Purity Degassing

Pump feed from

*Optional Drain Drain

Nominal daily output 216 l/day 216 l/day