Ordering number:ENN2063A

PNP/NPN Epitaxial Planar Silicon Transistors

2SB1143/2SD1683

50V/4A Switching Applications

Applications Package Dimensions

· Voltage regulators, relay drivers, lamp drivers, unit:mm
electrical equipment. 2042B
[2SB1143/2SD1683]
Features 8.0
4.0
· Adoption of FBET, MBIT processes. 3.3

1.4
1.0 1.0

· Low saturation voltage.

· Large current capacity and wide ASO.

11.0
3.0

7.5
1.5
1.6
0.8

3.0
15.5
0.8

0.75 0.7

1 2 3 1 : Emitter
( ) : 2SB1143 2 : Collector
2.4

1.7
4.8
3 : Base
Specifications SANYO : TO-126ML

Absolute Maximum Ratings at Ta = 25˚C

Parameter Symbol Conditions Ratings Unit
Collector-to-Base Voltage VCBO (–)60 V
Collector-to-Emitter Voltage VCEO (–)50 V
Emitter-to-Base Voltage VEBO (–)6 V
Collector Current IC (–)4 A
Collector Current (Pulse) ICP (–)6 A
1.5 W
Collector Dissipation PC
Tc=25˚C 10 W
Junction Temperature Tj 150 ˚C
Storage Temperature Tstg –55 to +150 ˚C

Electrical Characteristics at Ta = 25˚C

Ratings
Parameter Symbol Conditions Unit
min typ max
Collector Cutoff Current ICBO VCB=(–)40V, IE=0 (–)1 µA
Emitter Cutoff Current IEBO VEB=(–)4V, IC=0 (–)1 µA
hFE1 VCE=(–)2V, IC=(–)100mA 100* 560*
DC Current Gain
hFE2 VCE=(–)2V, IC=(–)3A 40
Gain-Bandwidth Product fT VCE=(–)10V, IC=(–)50mA 150 MHz
* ; The 2SB1143/2SD1683 are classified by 100mA hFE as follows : Continued on next page.
Rank R S T U
hFE 100 to 200 140 to 280 200 to 400 280 to 560

Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.

SANYO Electric Co.,Ltd. Semiconductor Company

TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
O2003TN (KOTO)/92098HA (KT)/4137KI/D176TA, TS No.2063–1/4
 2SB1143/2SD1683
Continued from preceding page.
Ratings
Parameter Symbol Conditions Unit
min typ max
Output Capacitance Cob VCB=(–)10V, f=1MHz (39)25 pF
(–350) (–700) mV
Collector-to-Emitter Saturation Voltage VCE(sat) IC=(–)2A, IB=(–)100mA
190 500 mV
Base-to-Emitter Saturation Voltage VBE(sat) IC=(–)2A, IB=(–)100mA (–)0.94 (–)1.2 V
Collector-to-Base Breakdown Voltage V(BR)CBO IC=(–)10µA, IE=0 (–)60 V
Collector-to-Emitter Breakdown Voltage V(BR)CEO IC=(–)1mA, RBE=∞ (–)50 V
Emitter-to-Base Breakdown Voltage V(BR)EBO IE=(–)10µA, IC=0 (–)6 V
Turn-ON Time ton See specified Test Circuit (70)70 ns
(450) ns
Storage Time tstg See specified Test Circuit
650 ns
Fall Time tf See specified Test Circuit (30)35 ns

Switching Time Test Circuit

IB1
PW=20µs
OUTPUT
D.C.≤1% IB2

INPUT RB
VR RL
25Ω
50Ω
+ +
100µF 470µF

VBE= --5V VCC=25V

IC=10IB1= --10IB2=1A
(For PNP, the porarity is reversed.)

IC -- VCE IC -- VCE
--5 5
2SB1143 2SD1683 A
mA 100m
0 80mA
--20
--4 4
mA 60mA
Collector Current, IC – A

Collector Current, IC – A

--100
40mA
--3 --50mA 3

20mA
--20mA
--2 2 10mA
--10mA
5mA
--1 --5mA 1

IB=0 IB=0
0 0
0 --0.4 --0.8 --1.2 --1.6 --2.0 0 0.4 0.8 1.2 1.6 2.0
Collector-to-Emitter Voltage, VCE – V ITR09047 Collector-to-Emitter Voltage, VCE – V ITR09048
IC -- VCE IC -- VCE
--2.0 2.0
2SB1143 2SD1683
mA --12m
A 8mA
--14
--10mA 7mA
--1.6 1.6
Collector Current, IC – A

Collector Current, IC – A

--8mA 6mA

--1.2 --6mA 1.2

5mA

4mA
--4mA
--0.8 0.8 3mA

--2mA 2mA
--0.4 0.4
1mA

IB=0 IB=0
0 0
0 --4 --8 --12 --16 --20 0 4 8 12 16 20
Collector-to-Emitter Voltage, VCE – V ITR09049 Collector-to-Emitter Voltage, VCE – V ITR09050

No.2063–2/4
 2SB1143/2SD1683
IC -- VBE IC -- VBE
--4.8 4.8
2SB1143 2SD1683
VCE= --2V VCE=2V
--4.0 4.0
Collector Current, IC – A

Collector Current, IC – A
--3.2 3.2

--2.4 2.4

--1.6 1.6

25° °C
25° °C

75
75

C
°C
--25 C

Ta=
°C
Ta=

--0.8 0.8

--25
0 0
0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 --1.4 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4
Base-to-Emitter Voltage, VBE – V ITR09051 Base-to-Emitter Voltage, VBE – V ITR09052
hFE -- IC hFE -- IC
1000 1000
2SB1143 2SD1683
7 VCE= --2V 7 VCE=2V
5 5

3 Ta=75°C 3 25°C
DC Current Gain, hFE

DC Current Gain, hFE

25°C Ta=75°C
2 2
--25°C
--25°C
100 100

7 7
5 5

3 3

2 2

10 10
7 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5
Collector Current, IC – A ITR09053 Collector Current, IC – A ITR09054
f T -- IC Cob -- VCB
1000 5
2SB1143 / 2SD1683 2SB1143 / 2SD1683
7 VCE=10V f=1MHz
Gain-Bandwidth Product, fT – MHz

3
5
Output Capacitance, Cob -- pF

2
3
2SD
2 168
3
2SB 100
1143
100 7
7
2SB1
5 143
5 2SD
168
3 3
3
2
2

10 For PNP, minus sign is omitted. 10 For PNP, minus sign is omitted.
0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10 1.0 2 3 5 7 10 2 3 5 7 100
Collector Current, IC – A ITR09055 Collector-to-Base Voltage, VCB -- V ITR09056
VCE(sat) -- IC VCE(sat) -- IC
5 5
2SB1143 2SD1642
3 IC / IB=20 3 IC / IB=20
Saturation Voltage, VCE (sat) – mV

Saturation Voltage, VCE (sat) – mV

2 2

--1000 1000
7 7
5 5

3 3
Collector-to-Emitter

Collector-to-Emitter

2 2

--100 100
7 25°C 7
5
°C
5
25°C
= --25
3 Ta 3 Ta=75°C
75°C
2 2 --25°C
--10 10
7 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5
Collector Current, IC – A ITR09057 Collector Current, IC – A ITR09058

No.2063–3/4
 2SB1143/2SD1683
VBE(sat) -- IC VBE(sat) -- IC
--10 10
2SB1143 2SD1683
7 7
IC / IB=20 IC / IB=20
5
Saturation Voltage, VBE (sat) – V

Saturation Voltage, VBE (sat) – V

5

3
3
2
2

25°C
Ta= --25°C
1.0

25°C 7
Base-to-Emitter

Base-to-Emitter
--1.0
Ta= --25°C
5 75°C
7

5 75°C 3

2
3

2 0.1
7 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5
Collector Current, IC – A ITR09059 Collector Current, IC – A ITR09060
ASO PC -- Ta
10 12
7 ICP=6A 2SB1143 / 2SD1683 2SB1143 / 2SD1683
5 10 1m
ms s 10
IC=4A DC

Collector Dissipation, PC – W
3
op
Collector Current, IC – A

10

2 era
0m

tio
s

DC nT 8
1.0 c=
7 op 25
era °C
5 tio 6
nT
3 a=
25
2 °C
4
0.1
7
5 Ta=25°C 2
No heat si
1.5 nk
Single pulse
3
2
(For PNP, minus sign is omitted.) 0
3 5 7 1.0 2 3 5 7 10 2 3 5 7 100 0 20 40 60 80 100 120 140 160
Collector-to-Emitter Voltage, VCE – V ITR09061 Ambient Temperature, Ta – ˚C ITR09062

Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be expor ted without obtaining the expor t license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.

This catalog provides information as of October, 2003. Specifications and information herein are subject
to change without notice.

PS No.2063–4/4