Modular Cartridge Valves LID: Check Function, ISO 7368 Sizes From 16 To 80
Modular Cartridge Valves LID: Check Function, ISO 7368 Sizes From 16 To 80
Modular Cartridge Valves LID: Check Function, ISO 7368 Sizes From 16 To 80
LI D A - 1 /* ** /* *
Optional different provision or setting
Cover according to ISO 7368
of the calibrated plugs in the pilot
channels, see section
A = normally closed;
O = normally open;
B = with shuttle valve for pilot selection;
R = with hydraulically operated pilot check valve; Series number
Size:
1 = 16; 3 = 32; 5 = 50; 8 = 80 (only for LIDA)
2 = 25; 4 = 40; 6 = 63;
LIDO is available only in sizes 16, 25, 32, 40, 50 Options: see section
For model code of poppet, see section
2 HYDRAULIC SYMBOLS
H040
3 HYDRAULIC CHARACTERISTICS
Covers, see section LIDA, LIDO, LIDB, LIDR
Poppet, see section , 32, 52 (1), 62, 63 (2) 33 42 43
Size 16 25 32 40 50 63 80 16 25 32 40 50 63 80 16 25 32 40 50 63 80 16 25 32 40 50 63 80
Max flow at Δp = 6 bar [l/min] 180 430 670 1400 2200 3500 5600 160 330 530 1100 1700 2600 4000 170 380 560 1300 2200 2800 4800 130 300 480 940 1500 2200 3500
Max pressure [bar] 350 bar at port A, B, X, Z1, Z2; 70 bar at port Y
(1) Poppet 52 is available only in sizes 16…50
(2) Poppets 62, 63 are available only in sizes 16, 25, 32, 50
SC LI – 16 32 1 ** /*
Cartridge according to ISO 7368 Synthetic fluids:
WG = water-glycol
PE = phosphate ester
Size, the same of relevant cover:
16 40 80
25 50 Series number
32 63
Type of poppet, see section for maximum flow: Spring cracking pressure:
32, 33 (sizes 16…80) = for all models except LIDO; 1 = 0,3 bar for poppet 32, 42, 52;
42, 43 (sizes 16…80) = as 32, 33 but with dumping nose. For all models except LIDO; 1 = 0,6 bar for poppet 33, 43;
52 (sizes 16…50) = only for LIDA; 2 = 1,5 bar for poppet 32, 42, 52;
62 (sizes 16, 25, 32, 40, 50) = only for LIDO; 3 = 3 bar for all poppets
63 (sizes 16, 25, 32, 50) = as 62 but with dumping nose. Only for LIDO; 6 = 5,5 bar for all poppets
Code of poppet 32 33 42 43 52 62 63
Functional sketch
(Hydraulic symbol)
Typical section
0,3 bar (spring 1) 0,5 bar (spring 1) 0,4 bar (spring 1) 0,3 bar (spring 1) 0,5 bar (spring 1) 0,4 bar (spring 1) 0,3 bar (spring 1) - -
Opening pressure A →B 1,5 bar (spring 2) - - 1,3 bar (spring 2) - - 1,5 bar (spring 2) - -
(2) 3 bar (spring 3) 2,5 bar (spring 3) 2,1 bar (spring 3) 3,2 bar (spring 3) 2,7 bar (spring 3) 2,5 bar (spring 3) 3 bar (spring 3) - -
6 bar (spring 6) 6 bar (spring 6) 4,3 bar (spring 6) 6 bar (spring 6) 6 bar (spring 6) 4,9 bar (spring 6) 6 bar (spring 6) - -
3 bar (spring 1) 0,5 bar (spring 1) 0,7 bar (spring 1) 3 bar (spring 1) 0,5 bar (spring 1) 0,7 bar (spring 1) - - -
Opening pressure B →A 12,8 bar (spring 2) - - 12,8 bar (spring 2) - - - - -
(2) 32,5 bar (spring 3) 2,5 bar (spring 3) 3,7 bar (spring 3) 32,5 bar (spring 3) 2,4 bar (spring 3) 3,7 bar (spring 3) - - -
59,4 bar (spring 6) 6 bar (spring 6) 7,5 bar (spring 6) 59,4 bar (spring 6) 6 bar (spring 6) 7,5 bar (spring 6) - - -
(1) It is the ratio of the area on which the main pressure of the circuit is applied to the area on which the pilot pressure is applied
(2) Depending on the spring cracking pressure and the area ratio of the poppet
7 OPTIONS
For LIDA (sizes 16 and 25), for LIDO (all sizes) LIDB (sizes 40 ÷ 63), LIDR (sizes 40 ÷ 63):
/E = with external attachments Pp and underneath port X supplied plugged;
For all models:
/F = (not for LIDO) prearranged for coupling to an intermediate element with position detector for safety valves, see tab. E110.
*** = Calibrated plugs different from standard ones. All covers contain and are equipped with restrictors in the pilot channels according to the
standard arrangement which is preset for each variant (see section 11 ). They can be exchanged with others for particular use. When orde-
ring covers equipped with restrictors that are different from the standard ones it must be indicated at the end of the model code:
LIDB - 4 /E ** /WG X 06
Channel where the restrictor Size of the throttling hole
have to be provided: in ten of millimiters:
X = channel X Z1 = channel Z1 05 = 0,5 mm 10 =1 mm 17 = 1,7 mm
F = channel F Z2 = channel Z2 06 = 0,6 mm 12 =1,2 mm 20 = 2 mm
08 = 0,8 mm 15 =1,5 mm
8 DIAGRAMS OF POPPETS
Ø d3 Ø d4 L4
Sizes Ø d1 Ø d2 max max L1 L2 L3 max L5 L6 L7 U W
+0,1 +0,1
16 32 25 16 22,5 43 0 56 0 54 42,5 20 2 2 0,03 0,05
+0,1 +0,1
25 45 34 25 27 58 0 72 0 70 57 30 2,5 2,5 0,03 0,05
+0,1 +0,1
32 60 45 32 38,5 70 0 85 0 83 68,5 30 2,5 2,5 0,03 0,1
+0,1 +0,1
40 75 55 40 54,5 87 0 105 0 102 84,5 30 3 3 0,05 0,1
+0,1 +0,1
50 90 68 50 62,5 100 0 122 0 117 97,5 35 3 3 0,05 0,1
+0,1 +0,1
63 120 90 63 87 130 0 155 0 150 127 40 4 4 0,05 0,2
+0,2 +0,2
80 145 110 80 100 175 0 205 0 200 170,5 40 5 5 0,05 0,2
J L ØP S
Sizes A B C D E F G min K min
M ØN max R max T V
16 2 12,5 23 46 48 46 23 - - 65 M8 4 4 22 8 2 48
25 4 13 29 58 62 58 29 - - 85 M12 6 6 30 8 4 62
32 6 18 35 70 76 70 35 - - 102 M16 6 8 38 8 6 76
63 12,5 24,5 62,5 125 137,5 125 62,5 - - 180 M30 8 12 66 8 12,5 137,5
Cover
LIDO-1
LIDO-2
LIDO-3
LIDO-5
LIDA-1
LIDB-1
LIDR-1
LIDA-2
LIDB-2
LIDR-2
LIDA-3
LIDB-3
LIDR-3
LIDA-4
LIDB-4
LIDR-4
LIDA-5
LIDB-5
LIDR-5
LIDA-6
LIDB-6
LIDR-6
LIDA-8
Port
- M4 - - - M4 - - - M6 - - - - - - M6 - - - - - -
X
- 10A - - - 10A - - - 12A - - - - - - 15F - - - - - -
- - - M6 - - - M6 - - - M6 - - M6 - - - M6 - - M6 -
P
- - - 12A - - - 12A - - - 15A - - 17A - - - 20A - - 20A -
- - - M4 - - - M6 - - - M6 - - M6 - - - M6 - - M6 -
Z2
- - - 100F - - - 300F - - - 300F - - 300F - - - 300F - - 300F -
(1) The showed codes define the orifice thread, diameter of the throttling hole in ten of millimiters and the form of throttle sectional area:
A = short calibrated hole F = long calibrated hole
H040
12 COVER DIMENSIONS [mm]
LIDA-2 Nr. 4
85 85 40 - - 6 5 - 3,5 G 1/4 - 2 OR 108
M12x45
1 OR 108 (2)
125 1,8
LIDO-2
(4)
LIDA-3 Nr. 4
50 4 OR 2043
100 100 60 (2) 20 66 6 5 - 3,5 G 1/4 - M16x55 300 2,3
LIDO-3 1 OR 2043 (2)
(5)
LIDA-4 Nr. 4
60 20 66 3,5 4 OR 2050
125 125 100 - - 6 5 - 3 G 1/4 - M20x70 600 6,2
LIDO-4 1 OR 2050
(6)
LIDA-5 Nr. 4
70
140 140 110 (2) 20 66 4 6 3,5 3,5 G 1/4 G 1/4 4 OR 2050 M20x80 600 9,3
LIDO-5 1 OR 2050 (2)
(7)
LIDA-6 Nr. 4
180 180 80 20 66 4 6 3,5 3,5 G 3/8 G 3/8 4 OR 2056 2100 17,1
M30x90
LIDA-8 Ø Nr. 8
- 80 30 73 6 8 - 3,5 G 3/8 - 4 OR 123 1000 27
250 M24x90
(1) For LIDO-2: the external attachment Pp is located at Y port side of the cover;
(2) Only for LIDO;
LIDA (size 16 ÷ 25) LIDA (size 32…80) (3) Hexagon socket head screw according to DIN 912 class 12.9
LIDO (size 16…50) (4) M12x50 for LIDO-2;
(5) M16x60 for LIDO-3;
(6) M20x100 for LIDO-4;
(7) M20x110 for LIDO-5;
LIDB-1 Nr. 4
70 65 40 4 3 - - - - 4 OR 108 M8x45
35 2,2
LIDB-2 Nr. 4
85 85 40 6 5 - - - - 4 OR 108 M12x45
125 2,6
LIDB-3 Nr. 4
100 100 50 6 5 - - - - 4 OR 2043 M16x55
300 3,1
LIDB-4 Nr. 4
125 125 60 6 5 3,5 - G 1/4 - 4 OR 2050 M20x70
600 7
LIDB-5 Nr. 4
140 140 70 4 6 3,5 3,5 G 1/4 G 1/4 4 OR 2050 M20x80
600 10,1
LIDB-6 Nr. 4
180 180 80 4 6 3,5 3,5 G 3/8 G 3/8 4 OR 2056 M30x90
2100 17,9
(1)
(1) The position of external attachments Pp, Dr, Z1 and Z2 are inverted each others respect to
the showed sketch
(2) Hexagon socket head screw according to DIN 912 class 12.9
LIDR-1 Nr. 4
70 65 40 4 3,5 4 3 - - - - 4 OR 108 35 2,5
M8x45
LIDR-2 Nr. 4
85 85 40 13,5 - 6 5 - - - - 4 OR 108 125 2,9
M12x45
LIDR-3 Nr. 4
100 100 50 6 - 6 5 - - - - 4 OR 2043 300 3,4
M16x55
LIDR-4 Nr. 4
125 125 60 - - 6 5 3,5 - G 1/4 - 4 OR 2050 600 7,3
M20x70
LIDR-5 Nr. 4
140 140 70 - - 4 6 3,5 3,5 G 1/4 G 1/4 4 OR 2050 600 10,4
M20x80
LIDR-6 Nr. 4
180 180 80 - - 4 6 3,5 3,5 G 3/8 G 3/8 4 OR 2056 2100 18,3
(1) M30x90
(1) The position of external attachments Pp, Dr, Z1 and Z2 are inverted each others respect to
the showed sketch
(2) Hexagon socket head screw according to DIN 912 class 12.9
05/09