Scribd
Upload
19 views1 page

Crystal 1

1. Print the KrystalShaper Net instructions on heavy card stock paper for best results. 2. Cut out the printed shapes along the lines and fold along the tabs and crystal faces. 3. Apply white glue to the tabs one pair at a time using a toothpick and hold the tabs together until dry to assemble the 3D crystal model.

Uploaded by

Irfan Alfieri Widyatmoko
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
19 views1 page

Crystal 1

1. Print the KrystalShaper Net instructions on heavy card stock paper for best results. 2. Cut out the printed shapes along the lines and fold along the tabs and crystal faces. 3. Apply white glue to the tabs one pair at a time using a toothpick and hold the tabs together until dry to assemble the 3D crystal model.

Uploaded by

Irfan Alfieri Widyatmoko
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

KrystalShaper Net

http://webmineral.com
Instructions:

1. Print on Heavy Paper


Card Stock for best
results

2. Cut Along Lines


1-4-2 -2-40
3. Fold and crease
Tabs and crystal
faces

4. Test fold 4-2-1


crystal to 2-40

check fit

5. Apply White
Glue on Tabs,
one pair at
a time 4-21
2-1-4 1-42
using
Toothpick

6. Hold Tabs -1-42


Together 40-2
2-14
until Dry
402
0-24
7. Repeat for
Each Tabs
21-4
0-2-4
42-1

421 214

14-2
02-4
240 024
142

-1-4-2

-2-1-4

-21-4 -14-2 -2-14

-214
-142

-4-2-1 -40-2
-42-1 -4-21
-402
-240
-421

You might also like