Cat®

6050/6050 FS
Hydraulic Shovel

Specifications
Electrical System (diesel drive) Electric Motor (optional)
System voltage 24 V Type Squirrel cage induction motor
Batteries 6 x 210 Ah - 12 V each Output 1 600 kW
in series / parallel installation 630 AH - 24 V in total Voltage 6.6 kV +/- 10%
Alternators 2 x 175 A each (other on request)
Working spot lights 8 x high-brightness Rated Current IN 166 A (at 6.6 kV)
Xenon lights Frequency 50 Hz (60 Hz optional)
• Battery isolation relays Revolutions 1,500 min-1
• Emergency stop switches accessible from ground level, (1,800 min-1 optional)
in engine module and in operator’s cab Starting current 700 A (525 A optional)
• Custom-made electric motor with increased gap between rotor
and stator to withstand severe mining conditions
Hydraulic Oil Cooling • Power limit control by Pump Management System
Oil flow of cooling pumps
Diesel version 4 x 488 l/min (4x 129 US gal/min)
Electric version 4 x 491 l/min (4x 130 US gal/min)
Diesel Engines
Diameter of fans 4 x 1 170 mm (4 x 46 in)
• Cooling system is fully independent of all main circuits, i.e. Engine Features
controlled cooling capacity is available whenever engine is Fuel tank capacity 10 700 l (2,820 US gal)
running
• Hydraulically driven radiator fan with electronically
• Gear-type cooling pumps supplying high-volume, low- controlled fan speed
pressure oil to fans and aluminium coolers
• Microprocessed engine control
• Fan speed and flow of oil to the coolers are thermostatically
controlled • Automatic rev. reduction
• Extremely high cooling efficiency to ensure optimum oil • Heavy-duty air filters, STRATA 1 with automatic
dust evacuation
temperature
• Two-stage fuel filter incl. water separator
• Additional high-capacity water separator
• Pre-lube starting system
• Eliminator with centrifuge for engine oil filtration
Hydraulic Shovel—6050/6050 FS

7 580 mm 8 730 mm
(24 ft 10 in) (26 ft 7 in)
7 350 mm
(24 ft 1 in) 7 000 mm
(23 ft)

8 760 mm
(28 ft 9 in)
7 600 mm
(24 ft 11 in) 6 460 mm
(21 ft 3 in)

2 480 mm 2 780 mm
(8 ft 2 in) (9 ft 1 in)
1,120 mm
(3 ft 8 in)

6 400 mm 1 400 mm
(21 ft) (4 ft 7 in)
8 540 mm 7 000 mm
(28 ft) (23 ft )

General Data Operating Weight

Operating Weight Shovel
Face Shovel 525 tonnes (579 tons) Standard track pads 1 400 mm (4 ft 7 in)
Backhoe 534 tonnes (589 tons) Operating weight 525 000 kg (1,157,420 lb)
Ground Pressure 25.7 N/cm2 (37.3 psi)
Engine Output SAE J 1995
Cummins® K1500E 1 880 kW 2,520 HP Additional track pads available on request
Cummins® QSK38 1 880 kW 2,520 HP Backhoe
Standard track pads 1 400 mm (4 ft 7 in)
Standard Bucket Capacity
Face Shovel (SAE 2:1) 26.0 m3 34.0 yd3 Operating weight 534 000 kg (1,177,260 lb)
Backhoe (SAE 1:1) 28.0 m3 36.6 yd3 Ground Pressure 25.7 N/cm2 (37.3 psi)
Additional track pads available on request

Features
• TriPower shovel attachment
• Independent oil cooling system
• Spacious walk-through machine house
• 5-circuit hydraulic system
• Electronic-hydraulic servo control
• Board Control System (BCS)
• Torque control in closed-loop swing circuit
• Automatic central lubrication system
• Xenon working lights
Hydraulic Shovel—6050/6050 FS
Diesel Engines Total volume of hydraulic oil
Diesel version Approx. 7 800 I (2,060 US gal)
Version 1 - Cummins K1500E Tier 1
®
Electric version Approx. 7 300 I (1,930 US gal)
Make and model 2 x Cummins K1500E
Hydraulic tank capacity
Total rated net power ISO 3046/1 1 880 kW (2,520 HP) Diesel version Approx. 5 500 l (1,450 US gal)
1,800 min-1 Electric version Approx. 5 000 l (1,320 US gal)
Total rated net power SAE J1349 1 880 kW (2,520 HP) • Pump Managing System contains:
1,800 min-1
- Electronic load limit control
Total rated gross power SAE J1995 1 880 kW (2,520 HP) - Flow on demand from main pumps depending on joystick
1,800 min-1 position
No. of cylinders (each engine) 12 - Automatic regulation of main pumps to zero flow without
demand
Bore 159 mm (6.25 in) - Automatic rpm reduction of engine speed during working
Stroke 159 mm (6.25 in) breaks
- Reduced oil flow of main pumps at high hydraulic oil
Displacement 37.8 l (2,300 in3) temperature or high engine temperature
Aspiration Turbocharged and • Pressure cut-off for main pumps
aftercooled
• Cooling of pump transmission gear oil
Max. altitude without deration 2 438 m (8,000 ft) a.s.l.
• Filters:
Version 2 - Cummins QSK38 Tier 2 - Full-flow high-pressure filters (100 μm) for the main pumps,
Make and model 2 x Cummins QSK38 installed directly behind each pump
Total rated net power ISO 3046/1 1 880 kW (2,520 HP) - High pressure filters (100 μm) for the closed swing circuit
1,800 min-1 - Full-flow filters (10 μm) for the complete return circuit
- Pressure filters (40 μm and 6 μm) for servo circuit
Total rated net power SAE J1349 1 880 kW (2,520 HP) - Pressure filters (40 μm) for the feed pumps of the closed
1,800 min-1 swing circuit
Total rated gross power SAE J1995 1 880 kW (2,520 HP) - Transmission oil filters (40 μm)
1,800 min-1
No. of cylinders (each engine) 12
Bore 159 mm (6.25 in) Undercarriage
Stroke 159 mm (6.25 in) Travel speeds (2 stages)
Displacement 37.8 l (2,300 in3) 1st stage Max. 1.6 km/h (0.99 mph)
2nd stage Max. 2.3 km/h (1.44 mph)
Aspiration Turbocharged and
aftercooled Max. tractive force 2 576 kN (578,900 lb)
Gradability of travel drives Max. 50 %
Max. altitude without deration 3 300 m (10,800 ft) a.s.l.
Track pads (each side) 39
Emission certification US EPA Tier 4i
Bottom rollers (each side) 6
Support rollers (each side) 2 plus a skid plate in between
Hydraulic System with Pump Managing System Travel drives (each side) 1 planetary transmission with
2 two-stage axial piston motors
Main pumps 4 x variable flow axial piston pumps
(Diesel and electric versions) Parking brakes
Wet multiple disc brake, spring-applied/hydraulically released
Max. oil flow
Diesel version 4 x 912 l/min (4 x 241 US gal/min) • Cast double-grouser combined pad links with bushings
Electric version 4 x 933 l/min (4 x 246 US gal/min) connected by hardened full floating pins
Max. pressure, • All running surfaces of sprockets, idlers, rollers and pad
attachment 30 MPa = 300 bar (4,350 psi) links, as well as teeth contact areas of sprocket and pad links,
are hardened
Max. pressure,
travel 37 MPa = 370 bar (5,370 psi) • Fully hydraulic, self-adjusting track tensioning system with
membrane accumulator
Swing pumps
Diesel version 4 x reversible swash plate pumps • Automatic hydraulic retarder valve to prevent over-speed
Electric version 3 x reversible swash plate pumps on downhill travel
Max. oil flow • Acoustic travel alarm
Diesel version 4 x 351 l/min (4 x 93 US gal/min)
Electric version 3 x 491 l/min (3 x 131 US gal/min)
Max. pressure, swing system
Diesel version 32 MPa = 320 bar (4,640 psi)
Electric version 35 MPa = 350 bar (5,080 psi)
Hydraulic Shovel—6050/6050 FS
Operator’s Cab Retractable Service Station
Operator’s eye level approx. 7.6 m (24 ft 11 in) Retractable service station installed underneath the engine
Internal dimensions Length 2 200 mm (7 ft 3 in) module and easily accessible from ground.
Width 1 600 mm (5 ft 3 in) Equipped with:
Height 2 150 mm (7 ft 1 in) • Quick couplings for:
• Pneumatically cushioned and multi-adjustable comfort - Diesel fuel
seat with lumbar support, seat heating, safety belt, head-
and armrests - Engine coolant - left / right
• Switch in seat cushion to automatically neutralize the - Pump transmission gear oil - left / right
hydraulic controls when operator leaves the seat - Engine oil (oil pan) - left / right
• Joystick controls integrated in independently adjustable - Engine oil (additional tank - optional) - left / right
seat consoles
- Hydraulic oil tank
• Fold-away auxiliary seat with safety belt
- Grease container
• FOPS (rock guard; approved acc. to DIN ISO 3449) integrated
into cab structure • Cat jump-start socket
• All-round safety glass, armored windshield and sliding • Indicator lights for fuel tanks left/right full and grease
side window container full
• Windshield with parallel intermittent wiper / washer
• Roller blind at windshield
• Robust instrument panel incl. large colored BCS screen with Attachments
transflective technology • Booms and sticks are torsion-resistant, welded box design of
• Board Control System (BCS) electronic monitoring and data high tensile steel with massive steel castings at pivot areas
logging system for vital signs and service data of engines, • Welding procedures allow for internal counter-welding
hydraulic systems and lubrication systems (double prep weld) wherever possible
• Machine access via retractable boarding ladder, • Booms and sticks are stress-relieved after welding
hydraulically operated
• Inspection hole in booms
• Sliding emergency ladder (kick-down type) with ladder cage
• Catwalks with rails at booms
• Pressure-free lowering of boom (FS and BH) and stick (FS)
by means of a float valve
Swing System • Shovel attachment with unique TriPower kinematics ensuring
Swing Drives 4 compact planetary transmissions the following main features:
with axial piston motors - Horizontal automatic constant-angle bucket guidance
Parking Brakes Wet multiple disc brake, - Vertical automatic constant-angle bucket guidance
spring-loaded / hydraulically released
- Automatic roll-back limiter to prevent material spillage
Max. swing speed Diesel version 3.8 rpm
Electric version 4.0 rpm - Kinematic assistance to hydraulic forces
Swing ring Triple-race roller bearing - Constant boom momentum throughout the entire lift arc
with sealed internal gearing - Crowd force assistance
• Closed-loop swing circuit with torque control • All buckets (FS and BH) are equipped with a universal wear
• Hydraulic braking of the swing motion by counteracting package suitable for all standard applications, which consists
control of:
• All raceways of swing ring, as well as grease bath for internal - Special liner material covering main wear areas inside and
gearing, supplied by automatic central lubrication system outside of bucket
- Lip shrouds between teeth
- Wing shrouds on side walls
Automatic Lubrication System - Heel shrouds at bottom edges
Capacity of grease container 1 000 l (264 US gal) • Special wear packages for highly abrasive materials on request
• Dual-circuit system with hydraulically driven heavy-duty
pump and electronic time relay control to adjust the pause /
lube times
• Connected to the lubrication system are the swing roller
bearing with internal gearing and all pivot points of
attachment, bucket and cylinders
• System failures displayed by Board Control System
• Grease filters (200 μm) between service station and container,
as well as directly behind grease pump
Hydraulic Shovel—6050/6050 FS
TriPower Face Shovel Attachment (FS)
Working Diagram - Boom 8.0 m (26 ft 2 in) - Stick 5.1 m (16 ft 9 in)

Working Range Digging Forces

Max. digging height 15.3 m 50 ft 2 in Max. crowd force 1 890 kN 424,740 lb
Max. digging reach 16.2 m 53 ft 2 in Max. crowd force at
Max. digging depth 2.4 m 7 ft 10 in ground level 1 650 kN 370,800 lb
Max. dumping height 11.8 m 38 ft 9 in Max. breakout force 1 500 kN 337,100 lb
Crowd distance on level 5.5 m 19 ft

Face Shovels
Type Iron ore shovel Heavy rock shovel Heavy rock shovel Standard rock shovel Light rock shovel
Tooth system ESCO S130 ESCO S130 ESCO S130 ESCO S130 ESCO S130
Capacity SAE /
PCSA 1:1 21.0 m³ (27.5 yd³) 24.5 m³ (32.0 yd³) 26.5 m³ (34.7 yd³) 30.5 m³ (39.9 yd³) 32.3 m³ (42.2 yd³)
Capacity SAE /
CECE 2:1 18.0 m³ (23.5 yd³) 21.0 m³ (27.5 yd³) 23.0 m³ (30.1 yd³) 26.0 m³ (34.0 yd³) 28.0 m³ (36.6 yd³)
Total width 4 800 mm (15 ft 9 in) 4 800 mm (15 ft 9 in) 4 800 mm (15 ft 9 in) 4 800 mm (15 ft 9 in) 4 800 mm (15 ft 9 in)
Inner width 4 300 mm (14 ft 1 in) 4 300 mm (14 ft 1 in) 4 300 mm (14 ft 1 in) 4 300 mm (14 ft 1 in) 4 300 mm (14 ft 1 in)
Opening width 2 250 mm (8 ft 2 in) 2 500 mm (8 ft 2 in) 2 500 mm (8 ft 2 in) 2 500 mm (8 ft 2 in) 2 500 mm (8 ft 2 in)
No. of teeth 6 6 6 6 6
Weight including
wear kit 40 400 kg (89,070 lb) 42 400 kg (93,480 lb) 41 800 kg (92,150 lb) 42 900 kg (94,580 lb) 43 100 kg (95,020 lb)
Max. material
density (loose) 2.6 t/m³ (4,380 lb/yd³) 2.2 t/m³ (3,710 lb/yd³) 2.0 t/m³ (3,370 lb/yd³) 1.8 t/m³ (3,030 lb/yd³) 1.65 t/m³ (2,780 lb/yd³)
Hydraulic Shovel—6050/6050 FS
Backhoe Attachment (BH)
Working Diagram - Boom 10.5 m (34 ft 5 in) - Stick 5.5 m (18 ft 1 in)

Working Range Digging Forces

Max. digging depth 9.2 m 30 ft 2 in Max. crowd force 1 200 kN 269,680 lb
Max. digging reach 19.5 m 64 ft Max. breakout force 1 200 kN 269,680 lb
Max. digging height 16.8 m 55 ft 1 in

Backhoes
Type Standard rock bucket (Other buckets on request)
Tooth system ESCO size 110
Capacity SAE 1:1 28.0 m³ (36.6 yd³)
Capacity CECE 2:1 24.6 m³ (32.2 yd³)
Capacity struck 21.2 m³ (27.7 yd³)
Total width 4 440 mm (14 ft 7 in)
Inner width 4 040 mm (13 ft 3 in)
No. of teeth 6
Weight incl. universal wear kit 32 300 kg (72,210 lb)
Max. material density (loose) 1.8 t/m³ (3,030 lb/yd³)
Hydraulic Shovel—6050/6050 FS
General Packing List
Crawler side frame (2 units)

(6 ft 11 in)
2 100 mm
Width 2 200 mm (7 ft 3 in) Gross weight 44 600 kg (98,330 lb)

(6 ft 11 in)
2 100 mm
(6 ft 11 in)
2 100 mm
8 400 mm (27 ft 7 in)

8 400 mm (27 ft 7 in)

(6 ft 11 in)
2 100 mm
8 400 mm (27 ft 7 in)
6 750 mm (2

(6 ft 11 in)
2 100 mm
8 400 mm (27 ft 7 in) 330 mm (1 ft 1 in)
6 tracks consisting of 13 pad links each
6 750 mm (22 ft 2
86
400 mmmm
400 (27 ft (23
7 in) ft)
330 mm (1 ft 1 in)

Width 1 400 mm (4 ft 7 in) Gross weight (each) 10 700 kg

330 mm (1 ft 1 in) 6 750 m
6 400 mm (23 ft)

(23,590 lb) 6 400 mm (23 ft)

330 mm (1 ft 1 in)
330 mm (1 ft 1 in)
6 400 mm (23 ft)
6 400 mm (23 ft)

3 450 mm (11 ft 4 in)

3 450 mm (11 ft 4 in)

3 450 mm (11 ft 4 in)

Superstructure Center Frame

3 450 mm (11 ft 4 in)

3 450 mm (11 ft 4 in)

Width 3 600 mm (11 ft 10 in) Gross weight 62 000 kg
(136,690 lb) 10 200 mm (33 ft 6 in)
4 000 mm
10 200 mm (33 ft 6 in)
10 200 mm (33 ft 6 in)
10 200 mm (33 ft 6 in) 4 000
4 000 mm (13 ft
10 200 mm (33 ft 6 in)

3 700 mm (12 ft 2 in)

3 700 mm (12 ft 2 in)

Cab pedestal module
3 700 mm (12 ft 2 in)
Width 2 500 mm (8 ft 2 in) Gross weight 7 100 kg (15,650 lb)

3 700 mm (12 ft 2 in)

3 700 mm (12 ft 2 in)
3 720 mm (12 ft 2 in)
3 720 mm (12 ft 2 in)
4 000 mm
4 000(13
mmf
3 720 mm (12 ft 2 in)
4 000 mm (13 ft 1 in)

3 720 mm (12 ft 2 in)

1 750 mm
(5 ft 9 in)
1 750 mm
(5 ft 9 in)
3 720 mm (12 ft 2 in)
3 070 mm (10 ft 1 in)

1 750 mm
(5 ft 9 in)
Crate with cabin and FOPS
3 070 mm (10 ft 1 in)

1 580 mm (5 ft 2 in)

Width 2 610 mm (8 ft 7 in) Gross weight 3 500 kg (7,720 lb) 1 580 mm (5 ft 2 in)
3 070 mm (10 ft 1 in)

1 580 mm (5 ft 2 in)

3 500 mm (11 ft 6 in)

3 500 mm (11 ft 6 in)

3 070 mm (10 ft 1 in)

3 500 mm (11 ft 6 in)

3 070 mm (10 ft 1 in)

Lengt

Length
Length

3 500 mm (11 ft 6 in)

3 500 mm (11 ft 6 in)

Above values are approximate. Details may vary depending on scope of supply and destination.
Exact data subject to selected machine configuration and final packing list.
 (7 ft 5(7in
2 1002

2 7502m7
in)ft 1(
2 100 mm
(6 ft 11 (6

2 750 mm
(7 ft 5 in)
Hydraulic Shovel—6050/6050 FS
8 400 mm (27 ft 7 in)
6 750 mm (22 ft 2 in)
8 400 mm (27 ft 7 in)
6 750 mm (22 ft 2 in)
General Packing List 8 400 mm (27 ft 7 in)
Undercarriage center frame with swing roller bearing
6 750 mm (22 ft 2 in)

(6 ft 11 in)
2 100 mm

2 750 mm
(7 ft 5 in)
Width 3 800 mm (12 ft 6 in) Gross weight 42 300 kg
330 mm (1 ft 1 in)
6 400 mm (23 ft) (93,250
330 mm (1 ft 1 in) lb)
6 400 mm (23 ft)
8 400 mm (27 ft 7 in) 330 mm (1 ft 1 in)
6 750 mm (22 ft 2 in)
6 400 mm (23 ft)

6 in)ft 6 in)
4 in)ft 4 in)

(6 ft 11 in)
2 100 mm
330 mm (1 ft 1 in)

2 750 mm
mmft(12
6 400 mm (23 ft)

mmft(11
Engine module with diesel engines

ft 6 (12
in)
ft 4 (11
in)

820
3mm
Width 7 000 mm (23 ft) Gross weight 42 000 kg
8 400 mm (27 ft 7 in)

450
3mm

(12
(92,590 lb)
6 750 mm (22 ft 2 in)

3 820
(11
3 450

3 820 mm (12 ft 6 in)3 820 mm

3 450 mm (11 ft 4 in)3 450 mm
10 200 mm (33 ft 6 in)
4 000 mm (13 ft 1 in)
330 mm (1 ft 1 in)
10 200 mm (33 ft 6 in)
4 000 mm (13 ft 1 in)
6 400 mm (23 ft)

10 200 mm (33 ft 6 in)

4 000 mm (13 ft 1 in)

3 820 mm (12 ft 6 in)

3 450 mm (11 ft 4 in)
10 200 mm (33 ft 6 in)
2 in)ft 2 in)

4 000 mm (13 ft 1 in)

Oil cooler module

4 in)ft 4 in)
in) ft(12

Width 2 000 mm (6 ft 7 in) Gross weight 9 750 kg

mm

mmft(12
(21,490 lb)
ft 2(12
700
3mm

ft 4 (12
in)
10 200 mm (33 ft 6 in)
4 000 mm (13 ft 1 in)

750
(12

3mm
3 700
3 700 mm (12 ft 2 in)3 700 mm

(12
3 750
3 750 mm (12 ft 4 in)3 750 mm
3 720 mm (12 ft 2 in)
4 000 mm (13 ft 1 in)
3 720 mm (12 ft 2 in)
4 000 mm (13 ft 1 in)
3 720 mm (12 ft 2 in)
ft 2 in)

4 000 mm (13 ft 1 in)

3 750 mm (12 ft 4 in)

3 700 mm (12

360 mm
(7 ft 9(7in)ft 9 in)
Counterweights
750 mm
(5 ft 9(5in)ft 9 in)

2 3602mm
Width Gross weight
1 7501mm

3 720 mm (12 ft 2 in)

2 360 mm
(7 ft 9 in)
4 000 mm (13 ft 1 in)
1 in)ft 1 in)

Lower part 7 000 mm (23 ft) 36 000 kg (79,370 lb) 3 720 mm (12 ft 2 in)
1 750 mm
(5 ft 9 in)

Upper part 7 000 mm (23 ft) 19 300 kg (42,550 lb)

4 000 mm (13 ft 1 in)
1 580 mm (5 ft 2 in) 1 550 mm (5 ft 1 in)
in) ft(10

1 580 mm (5 ft 2 in) 1 550 mm (5 ft 1 in)

070
3mm mm
ft 1(10

1 580 mm (5 ft 2 in) 1 550 mm (5 ft 1 in)

2 360 mm
(10

(7 ft 9 in)

2 360 mm
(7 ft 9 in)
3 070

1 750 mm

1 750 mm
(5 ft 9 in)

(5 ft 9 in)
3 070 mm (10 ft 1 in)3 070 mm

3 500 mm (11 ft 6 in)

Crates
3 070 mm (10 ft 1 in)

3 500 mm (11 ft 6 in)

Height

Content Length Width Height Gross

ft 2 in)Weight 1 550 mm (5 ft 1 in)
1 580 mm (5 ft 2 in) 1 550 mm (5 ft 1 in)
1 580 mm (5
Height Height

3 500 mm (11 ft 6 in)

Two radiators with fan 2 700 mm (8 ft 10 in) 1 950 mm (6 ft 5 in) 1 320 mm (4 ft 4 in) 2 460 kg (5,420 lb)
Four swing gears 1 350 mm (4 ft 5 in) 1 350 mm (4 ft 5 in) 2 100 mm (6 ft 7 in) 4 800 kg (10,580 lb)
Length

Swing ring cover 2 200 mm (7 ft 3 in) 1 300 mm (4 ft 33 500

in)mm 1(11030 mm (3 ft 5 in) 390
ft 6 in)
kg (860 lb)
Length

Swing ring bolts, access ladder,

3 500etc.
mm 3(11300 mm (10 ft 10 in) 1 600 mm (5 ft 3 in) 1 260 mm (4 ft 2 in) 2 900 kg (6,390 lb)
Height

ft 6 in) Length
Mufflers and covers 3 300 mm (10 ft 10 in) 1 600 mm (5 ft 3 in) 1 780 mm (5 ft 10 in) 1 620 kg (3,570 lb)
Height

Grease container with pump 1 700 mm (5 ft 7 in) 1 300 mm (4 ft 3 in) 2 100 mm (6 ft 11 in) 1 470 kg (3,240 lb) Length

Barrels (hydraulic oil; grease) 2 500 mm (8 ft 2 in) 1 300 mm (4 ft 3 in) 1 270 mm (4 ft 2 in) 1 700 kg (3,750 lb)
Barrels (hydraulic oil) 2 500 mm (8 ft 2 in) 1 300 mm (4 ft 3 in) 2 700 mm (8 ft 10 in) 1 900 kg (4,190 lb)
Length
Retractable ladder 5 570 mm (18 ft 3 in) 1 100 mm (3 ft 7 in) 2 000 mm (6 ft 7 in) 740 kg (1,630 lb)

Above values are approximate. Details may vary depending on scope of supply and destination.
Exact data subject to selected machine configuration and final packing list.
Hydraulic Shovel—6050/6050 FS
TriPower Shovel Attachment
Boom with main valve block, TriPower linkages and rods

ft 10)

3 600 mm (11 ft 10)

ft 10)
Width 3 050 mm (10 ft) Gross weight 46 800 kg (103,180 lb)

3 600
3 600 (11(11
mmmm
8 900 mm (29 ft 2 in)
8 900 mm (29mm
8 900 ft 2 in)
(29 ft 2 in)

Face shovel incl. pin for stick

in) in)
ft 10
Capacity (2:1) Width Gross Weight

ft 10

3 900 mm (12 ft 10 in)

(12(12
26.0 m³ (34.0 yd³) 4 800 mm (15 ft 9 in) 43 900 kg (96,780 lb)

mm
3 900
3 900 mm
4 400 mm (14 ft 5 in)
4 400 mm (14 ft 5 in)

4 400 mm (14 ft 5 in)

700 mm (2 ft 4 in)
700 mm (2 ft 4 in)

5 100 mm (16 ft 9 in) 4 400

Bundle with 2 boom cylinders 5 100 mm (16 ft 9 in)
700 mm (2 ft 4 in)
4 400 m

Width 1 200 mm (3 ft 11 in) Gross weight 7 100 kg (15,650 lb)

5 100 mm (16 ft 9 in)

in) mm (6 ft 7 in)
10) mm (11 ft 10)

2 000 mm (6 ft 7 in)
3 600 mm (11 ft 10)

6 in)
6 in)
ft ft
Stick

2 000 mm (6 ft27000

(10
3 600 mm (11 3ft600

mm(10
Width 2 400 mm (7 ft 10 in) Gross weight 17 300 kg (38,140 lb)

200mm

3 200 mm (10 ft 6 in)

6 000 mm (19 ft 8 in)

3 3200
8 900 mm (29 ft 2 in)
6 000 mm (19 ft 8 in)
8 900 mm (29 ft 2 in) 11 500 mm (37 ft 9 in) 7
11 500 mm (37 ft 9 in) 7
6 000 mm (19 ft 8 in)
8 900 mm (29 ft 2 in)

11 500 mm (37 ft 9 in)

mm (12 ft 10 in)

Crates with catwalks, railings and other parts

3 900 mm (12 ft 10 in)

Length Width Height Gross weight

in)
(12ftft44in)

Height

4 270 mm 1 900 mm 1 700 mm 3 400 kg

mm(12
10 in)

Height

(14 ft) (6 ft 3 in) (5 ft 7 in) (7,500 lb)

3 900 mm (12 3ft900

750mm
33750

Height
4 in)

Length
4 400 mm (14 ft 5 in)
3 750 mm (12 ft

44 500 Length
500 mm
mm (14
(14 ft
ft 99 in)
in)
4 400 mm (14 ft 5 in)

Length
4 400 mm (14 ft 5 in)
700 mm (2 ft 4 in) 700 mm (2 ft 4 in)
2 Bundles with 2 stick cylinders and 2 bucket cylinders
5 100 mm (16 ft 9 in)
700 mm (2 ft 4each
in)
4 400 4mm
500(14
mm ft (14
5 in)ft 9 in)
900 mm
900 mm (2
(2700
ft 11
ft 11mm
in) (2 ft 4 in)
in)
Width 1 200 mm (3 ft 11 in) Gross weight 5 200 kg (11,460 lb) 66 250
5 100 mm (16 ft 9 in) 250 mm
mm (20
(20 ft 66 in)
ft 4 in) mm (14 ft 5 in)
400 55200
200m
700 mm (2 ft 4 in) 700 mm (2 ft 4 in)

5 100 mm (16 ft 9 in) 4 400 mm (14 ft 5 in)

900 mm (2 ft 11 in)

6 250 mm (20 ft 6 in)

6 in)mm (10 ft 6 in)

2 750 mm (9 ft)
200 mm (10 ft 6 in)

Above values are approximate. Details may vary depending on scope of supply and destination.
Exact data subject to selected machine configuration and final packing list.
750 mm (9 ft)
(10 3ft200

(9 ft)
 4 400 mm (14 ft 5 in) 700 mm (2 ft 4 in)

3 900 m
5 100 mm (16 ft 9 in) 4 400 m

Hydraulic Shovel—6050/6050 FS
Length
4 400 mm (14 ft 5 in)
700 mm (2 ft 4 in)

5 100 mm (16 ft 9 in) 4 400 mm (14 ft 5 in

Backhoe Attachment 700 mm (2 ft 4 in)

Monoboom without main valve block 5 100 mm (16 ft 9 in)

3 200 mm (10 ft 6 in)

4 400 mm (14 ft 5 in

2 000 mm (6 ft 7 in)
Width 5 000 mm (16 ft 5 in) Gross weight 46 000 kg (101,410 lb)

3 600 mm (11 ft 10)

in) mm (10 ft 6 in)

2 000 mm (6 ft 7 in)
3 600 mm (11 ft 10)

3 200 mm (10 ft 36 200

11 500 mm (37 ft 9 in) 77
6 000 mm (19 ft 8 in)
8 900 mm (29 ft 2 in) 11 500 mm (37 ft 9 in) 7 700 mm (25 f
6 000 mm (19 ft 8 in)
8 900 mm (29 ft 2 in)

11 500 mm (37 ft 9 in) 7 700 mm (25 f

Backhoe bucket incl. pins for stick and linkage

750 mm (12 ft 4 in)

Capacity (2:1) Width Gross Weight

3 900 mm (12 ft 10 in)

in) mm (12 ft 4 in)

28 m³ (36.6 yd³) 4 440 mm (14 ft 7 in) 34 500 kg (76,060 lb)

3 900 mm (12 ft 10 in)

3Height
(12 ft 34 750
Height
Length

ft 7 in)
3 600 mm (11 ft 10)

(6mm
4 500
4 500mm
mm(14
(14 ft in)
ft 9 in)
Length

3 750
2 000 mm
4 400 mm (14 ft 5 in)
Length
Length
4 400 mm (14 ft 5 in) 4 500 mm (14 ft 9 in)
6 000 mm (19 ft 8 in)
8 900 mm (29 ft 2 in) 900 mm (2 ft 11 in)
900 mm (2 ft 11 in)
700 mm (2 ft 4 in) 6 250 mm (20 ft 6 in) 700 mm (2 ft 4 in) 5 200 mm (17 ft 1 in

2 pallets with boom cylinders each

5 100 mm (16 ft 9 in)
6 250 mm (20 ft 6 in) 5 200 m

Width 800 mm (2 ft 7 in) Gross weight 7 180 kg (15,830 lb)

700 mm (2 ft 4 in) 4 400 mm (14 ft 5 in)
700 mm (2 ft900 mm (2 ft 11 in)
4 in)
6 250 mm (20 ft 6 in) 5 200 mm (17 ft 1 in
3 900 mm (12 ft 10 in)

5 100 mm (16 ft 9 in) 4 400 mm (14 ft 5 in)

Height
3 200 mm (10 ft 6 in)

Length

Stick with linkage and bucket cylinder

4 400 mm (14 ft 5 in)

2 750 mm (9 ft)
Width 2 300 mm (7 ft 7 in) Gross weight 28 000 kg (61,730 lb)
3 200 mm (10 ft 6 in)

2 750 mm (9 ft)
700 mm (2 ft 4 in) 700 mm (2 ft 4 in)

5 100 mm (16 ft 9 in) 4 400 mm (14 ft 5 in)

11 500 mm (37 ft 9 in) 7 700 mm (25 ft 3 in)

11 500 mm (37 ft 9 in) 7 700 mm (25 ft 3 in)

3 200 mm (10 ft 6 in)

2 750 mm (9 ft)
3 750 mm (12 ft 4 in)

Crates with main valve block, catwalks, railings & other parts
Height
3 750 mm (12 ft 4 in)

Length Width Height

11 500 mm (37 ft 9 in) 7 700 mm (25 ft 3 in)

3 650 mm (12 ft) 2 170 mm (7 ft 1 in) 1 520 mm (5 ft)

Height

4 300 mm (14 ft 1 in) 1 900 mm (6 ft 3 in) 1 700 mm (5 ft 7 in) Length

4 960 mm (16 ft 3 in) 1 900 mm (6 ft 43500in)

mm 1
(14900
ft 9 in) mm (6 ft 3 in)
Length

Gross weight
4 500 mm (14 ft 9 in)
3 750 mm (12 ft 4 in)

5 000 kg (11,020 lb)

Height

3 260 kg (7,190 lb) 900 mm (2 ft 11 in) 860 mm (2 ft 10 in)

3 400 kg (7,500 lb) Length
6 250 mm (20 ft 6 in) 5 200 mm (17 ft 1 in) 860 mm (2 ft 10 in)
4 500 mm (14900 mm (2 ft 11 in)
ft 9 in)

6 250 mm (20 ft 6 in) 5 200 mm (17 ft 1 in)

2 pallets with stick cylinders each 900 mm (2 ft 11 in) 860 mm (2 ft 10 in)

Width 800 mm (2 ft 7 in) Gross weight 46 250200 kg

mm (20 (9,260 lb)
ft 6 in) 5 200 mm (17 ft 1 in)

Above values are approximate. Details may vary depending on scope of supply and destination.
Exact data subject to selected machine configuration and final packing list.
Hydraulic Shovel—6050/6050 FS
Component Accessibility on Superstructure
1. Diesel Engines 4. Oil coolers 7. Rotary distributor 10. Operator’s seat
2. Gearboxes with hydraulic pumps 5. Hydraulic tank 8. Travel valves 11. BCS tower
3. Engine radiators with hydraulically driven fan 6. Swing drives 9. Switch cabinet and battery box 12. Auxilliary seat

4 4

3
2 1

8 5
6 7
9

3
2 1
11
12
10

Anti-slip catwalks

Anti-slip walking areas

Optional Equipment
General Cab
• Export crating • Various heating and air-conditioning systems
• Finishing as per end user´s corporate colors • Roller blinds at all windows
• Customizing of logos as per customer’s specification • Rear windscreen wiper
• Additional instrumentation
Superstructure
• Hydraulic service crane on superstructure with auxilliary engine Undercarriage
• Mesabi radiators instead of standard radiators • Track pad width 1 600 mm (5 ft 3 in) or 1,800 mm (5 ft 11 in)
• Oil change interval extension for engine oil up to 1,000 hrs • Automatic lubrication of rollers by central lube system
• Folding access stairway, stairway angle approx. 45° • Cover plate under carbody (belly plate)
• Round container with a standard 200 l grease barrel (instead of 1,000 l
Attachment
grease container)
• Guards for shovel cylinders of FS-attachment
• Lubricated pinion for greasing of internal gearing of swing ring
• Xenon lighting on boom
• Various cold-weather packages
• Special wear packages
Additional optional equipment available on request
Hydraulic Shovel—6050/6050 FS

For more complete information on Cat products, dealer services, and industry solutions,
visit us on the web at mining.cat.com and www.cat.com

© 2012 Caterpillar Inc. AEHQ6525-01

All rights reserved

CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow” and the “Power Edge” trade
dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and
may not be used without permission.