GEA SMARTPUMP

GEA Hilge TP
Single-stage Centrifugal Pumps
for Standard Applications
Sustainable and Economical
Application Under
Hygienic Conditions

The energy-efficient and hygienic GEA Hilge TP centrifugal

pumps in the GEA SMARTPUMP line are available in a variety
of model sizes, optimally configured for different applications.

The GEA Hilge TP is a centrifugal pump designed for the The spiral housing for the GEA Hilge TP series is made of cold-
hygienic pumping of biologically demanding media. Low flow rolled steel. This material has an excellent surface quality, which
velocities and gentle discharge of media through the spiral is essential for optimum cleaning in CIP/SIP processes.
housing enables extremely gentle product handling. Eleven The GEA Hilge TP pump series is 3A and EHEDG certified. Typical
different pump types are available covering a capacity range up wall thicknesses of 8 mm (TP 1020 6 mm) provide high strength.
to 1057 gpm and flow heads up to approx. 430 ft., fine tuned for
each task.
TECHNICAL DATA
USGPM 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 1000 1050 1100 1150 1200

Q [m3/h] 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270

GEA Hilge TP 60 Hz
USGPM 50

Q [m3/h] 10 20
100

30
150

40
200

50
250

60
300

70
350

80
400

90
450

100 110
500

120
550

130
600

140
650

150
700

160
750

170
800

180
850

190 200
900

210
950

220
1000

230
1050

240
1100

250
1150

260
1200

270

Flow 1057 gpm (240 m³/h)

Head
USGPM 50 100 150 200 427 ft 250
(130 m)300 350 400 450 500 550 600 650 700 750 800 850 900 950

USGPM 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950
Media temperature
Q [m3/h] 10 20 30 40 284 °F
50 (140 °C)
60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220

Q [m3/h] 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220
Operating pressure 232 psi (16 bar)

GEA HILGE TP PERFORMANCE CURVE, 60 Hz

2-POLE,
GEA 3500
HILGE TPRPM
PERFORMANCE CURVE 0 10 20

2-POLE,
GEA 3500
HILGE TP RPM
PERFORMANCE CURVE 0
0
10
10
20
20
H 2-POLE, 3500 RPM 0 10 20
[ft] [m]
H 0 30 40 50 100 200 300 400 500 800 USGPM
[ft]
500 [m]
150 η 0,25
0 30 40 50 100 200 300 400 500 800 USGPM
100 TP 2575-2
300
500 150 TP 8080-2
η 0,25
100 TP 2575-2
TP 2050-2
300 TP 8080-2
TP 2050-2 TP 7060-2
150 50 TP 5060-2
TP 1540-2
40 TP 7060-2 TP 16040-2
150 50 TP 5060-2
100 TP 1540-2
30
40 TP 16040-2
100 30
20 TP 3050-2
60
TP 1020-2
20 TP 2030-2 TP 3050-2
60
10 TP 1020-2
30 TP 2030-2

30 10

5
10
5
10
0 0
0 10 20 30 40 50 100 200 300
0 0 Q [m3/h]
0 10 20 30 40 50 100 200 300
Q [m3/h]

GEA HILGE TP PERFORMANCE CURVE, 60 Hz

GEA HILGE TP PERFORMANCE CURVE
4-POLE,
GEA 1750
4-POLE, TPRPM
1750
HILGE RPM
PERFORMANCE CURVE
H 4-POLE, 1750 RPM
[ft] [m]
H 0 30 40 50 100 200 300 400 USGPM
40
[ft] [m]
0 30 40 50 100 200 300 400 USGPM
100 30
40
TP 2575-4 TP 8080-4
100 30
20 TP
60 TP 2575-4
2050-4 TP 8080-4
20 TP 2050-4
1540-4
60 TP TP 7060-4
TP 5060-4
10 TP 1540-4 TP 7060-4
30 TP 5060-4 TP 16040-4
10
30 TP 16040-4
5
15 TP 3050-4
5 TP 1020-4
15
10 TP 2030-4 TP 3050-4
3 TP 1020-4
10 TP 2030-4
3
2
5
2
5
0 0
0 10 20 30 40 50 100 140
0 0 Q [m3/h]
0 10 20 30 40 50 100 140
Q [m /h]
3
FEATURES AND BENEFITS

Applications
The GEA Hilge TP series has been designed for a variety of
applications within:

Breweries Dairies Cosmetics

• Beer • Milk • Extracts
• Wort • Cream • Emulsions
1 • Yeast • Yogurt • Distillates
• Water • Whey
2
• CIP Solutions • Brine
• CIP Solutions

Application options GEA Hilge TP

• Conveying • Filling lines • Filtration
• Circulation • Filling • Evaporation
• Pressure boosting • Emptying • Cleaning

1 Gapless sealing
2 Sterile mechanical seal
Technical benefits
• Operating pressure max. 232 psi
• Low NPSH value avoids early cavitation to the pump
• Energy-efficient operation, thanks to optimized speed control
and/or impeller trimming

Constructive characteristics
• Open impeller design optimized for gentle product handling
• All parts stainless steel, wetted components made of AISI 316L
• Surface roughnesses of R a ≤ 31.5 μin (0.8 μm) can be achieved
by mechanical treatment of the surface (higher surface qualities
on request)
• Premium efficient motors and washdown motors

Special characteristics
• Gentle product handling
• Low wear part stock requirement thanks to modular concept
• Acceptance test certification 3.1 (optional)
• 3A and EHEDG certified
• Sealings comply to FDA and USP Class VI
 
Mechanical seal optimized for hygienic applications
• Mechanical seal unit can be removed from the front
• Flushing unit easy to retrofit
• Pump shaft protected by wear sleeve
• Only two mechanical seal sizes for the entire pump series
• Seal face material options: carbon/silicon carbide (standard),
silicon carbide/silicon carbide
• Various elastomers with FDA approval (EPDM, FKM)

Sealing of GEA Hilge TP centrifugal pumps according to

EHEDG standards
The elastomer sealing is executed according to EHEDG standards. The
special groove enables the seal to be kept reliably in place at all times.
The shape of the groove is based on FEM analyses. The metallic stop
allows a defined compression of the seal, ensuring gap-free sealing
against the product chamber without dead corners.
 © GEA North America. All rights reserved. Subject to modifications. Printed in USA. The information contained in this brochure merely serves as a non-binding description of our products and is without guarantee.
Binding information, in particular relating to capacity data and suitability for specific applications, can only be provided within the framework of concrete inquiries. 7757-1000-021 (pkg. of 20) 12/2017
We live our values.
Excellence • Passion • Integrity • Responsibility • GEA-versity

GEA is a global technology company with multi-billion euro sales operations in more than 50 countries. Founded in
1881 the company is one of the largest providers of innovative equipment and process technology. GEA is listed in
the STOXX® Europe 600 Index. In addition, the company is included in selected MSCI Global Sustainability Indexes.

GEA North America

33 McAlister Farm Road GEA Canada
Portland, ME 04103 5045 South Service Road, Suite 201
Toll-Free 866 531 5629 Burlington, Ontario L7L 5Y7 Email [email protected]
Fax 207 878 7914 Tel 289 288 5500 gea.com