cJoy WT

Compact Joystick Wing Terminal

The cJoy Wing Terminal is a remote

operator terminal for cJoy and cPos
systems.
The terminal is designed for installation in
outdoor environment.

Features

• 3-axis joystick to control surge, sway and yaw

thruster demand
• Monochrome heading display with buttons for input Description
of new heading demand
• Operational mode buttons with indicator lights and The cJoy Wing Terminal provides the operator with
double-push action the necessary facilities to control a vessel in joystick
• Function for requesting command transfer from and auto heading mode.
other operator locations The terminal is ergonomically designed so that the
• Selection of joystick thrust operator can easily make the necessary adjustments
• Selection of rotation centre and give control commands.
• Alarm indicator/buzzer with silence button The terminal can be located at any location on the
• Power indicator with power failure alarm vessel, both indoor and outdoor. The electronics are
• Panel and display illumination adjustment housed in a self-contained unit, which may be bulk-
• Panel test function head mounted or insert into a suitable surface. A
• Joystick calibration function mounting bracket for the terminal is available.
• Automatic detection of panel location and orientation The terminal is interfaced to cJoy Operator Terminals
from junction box or cPos Operator Stations via a cable and a junction
box. Up to six wing terminals can be connected to one
operator terminal/station.
The terminal location and orientation is set up on each
junction box in order to make it easy to replace, move
or change round wing terminals.

Kongsberg Maritime reserves the right to make changes to the material or product described, at any time without notice. 177185C
 Technical Specications

Standards Applied Electrical

The equipment is designed to conform to the following Input voltage: 24 VDC (+10%, -15%)
standards: Power consumption: maximum 25 W
• EN 50081-2 Electromagnetic capability - Generic typical 20 W
emission standard, Part 2: Industrial environment.
• EN 50082-2 Electromagnetic capability - Generic Environmental Specications
immunity standard, Part 2: Industrial environment. Note:
• EN 60204 Safety of machinery - Electrical equip- Exposing the electronics to the limits of its
ment of machines, Part 1: General requirements. environmental specication will affect the equipment’s
• EN 60945 Marine navigation and radio communica- expected lifetime.
tion equipment and systems - General requirements:
Methods of testing and required tests. Ambient temperature
• IACS E10 Unied environmental test specication operational: -25° C to 70° C
for testing procedures for electrical, control and storage: -40 °C to 70° C
instrumentation equipment, marine computers and
peripherals covered by classication. Ambient humidity
operational: up to 90% relative humidity,
CE Marking non-condensing
The equipment conforms to the relevant EU direc- storage: up to 95% relative humidity,
tives. non-condensing

Type Approval Acoustic noise <40 dB

The cJoy Wing Terminal is designed for type approval
by: Cabinet Specication
• Det norske Veritas (DnV) Material: aluminium
• The American Bureau of Shipping (ABS) Protection standard: IP56
Colour: grey, NCS S 6500-N
Dimensions
Height: 170 mm Interface
Width: 310 mm The cJoy Wing Terminal is interfaced to cPos Operator
Depth: 210 mm stations or cJoy Operator Terminals via a CAN bus
Weight: 3 kg interface.

Article Numbers
cJoy Wing Terminal 603205
cJoy Wing Terminal Junction Box 603206
cJoy Wing Terminal Cable - 5 m 603203
cJoy Wing Terminal Cable - 2 m 603204

KONGSBERG MAR I T IME AS

P.O. Box 483, N-3601 Kongsberg, Norway
Telephone +47 32 28 50 00 Telefax +47 32 28 50 13
e-mail: [email protected], www.kongsberg.com