Scribd
Upload
16 views7 pages

Codigo Piano

The document defines constants and variables for an Arduino program that plays tones based on sensor input. It contains functions for questions and checking answers at different difficulty levels by reading sensors and playing tones.

Uploaded by

EILEN MARIANA CARDONA MOSQUERA
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
16 views7 pages

Codigo Piano

The document defines constants and variables for an Arduino program that plays tones based on sensor input. It contains functions for questions and checking answers at different difficulty levels by reading sensors and playing tones.

Uploaded by

EILEN MARIANA CARDONA MOSQUERA
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 7

#define analogInPin1 A3

#define analogInPin2 A4
#define analogInPin3 A5
#define speaker 8
#define EASY 2
#define MED 3
#define HARD 4
#define merah 5
#define hijau 6

int sensorValue1 = 0;
int sensorValue2 = 0;
int sensorValue3 = 0;
int easyques[4]={};
int easyanswer[4]={};
int medques[4]={};
int medanswer1[4]={};
int medanswer2[4]={};
int hardques[4]={};
int hardanswer1[4]={};
int hardanswer2[4]={};
int hardanswer3[4]={};
int i,j,k;

int frequency[] = {262, 278, 294, 312, 330, 349, 371, 392,
416, 440, 467, 493, 523, 554, 587, 622,
660, 698, 739, 783, 830, 880, 932, 987, 1046};

int upperLimit[] = {50, 150, 300, 450, 650,


800, 900, 960, 1000};

int lowerLimit[] = {0, 51, 151, 301, 451,


651, 801, 901, 961};

void setup() {
pinMode (EASY,INPUT);
pinMode (MED,INPUT);
pinMode (HARD,INPUT);
pinMode (speaker, OUTPUT);
pinMode (hijau, OUTPUT);
pinMode (merah, OUTPUT);
Serial.begin(9600);
}

void loop() {
if(digitalRead(EASY)== LOW){
easyquestion();
easyquestioncheck();
}
else if(digitalRead(MED)== LOW){
medquestion();
medquestioncheck();
}
else if(digitalRead(HARD)== LOW){
hardquestion();
hardquestioncheck();
}
else {
readMelody();
}

//Serial.print("Value1 = ");
//Serial.println(sensorValue1);
//Serial.print("Value2 = ");
//Serial.println(sensorValue2);
//Serial.print("Value3 = ");
//Serial.println(sensorValue3);
Serial.println(frequency[i]);
}

void readMelody() {
sensorValue1 = analogRead(analogInPin1);
for(int i = 0; i<8; i++)
{
if (sensorValue1 < upperLimit[i] && sensorValue1 >= lowerLimit[i]){
tone(speaker,frequency[i],60);
}
}
sensorValue2 = analogRead(analogInPin2);
for(int i = 0; i<8; i++)
{
if (sensorValue2 < upperLimit[i] && sensorValue2 >= lowerLimit[i]){
tone(speaker,frequency[i+8],60);
}
}
sensorValue3 = analogRead(analogInPin3);
for(int i = 0; i<9; i++)
{
if (sensorValue3 < upperLimit[i] && sensorValue3 >= lowerLimit[i]){
tone(speaker,frequency[i+16],60);
}
}

void easyquestion(){
for(int j =0;j<4;j++){
digitalWrite(speaker,HIGH);
int randomfrequency = frequency[random(7)];
easyques[j]=randomfrequency;
tone(speaker,randomfrequency,300);
digitalWrite(speaker,LOW);
delay(500);
Serial.println(easyques[j]);
}
}

void easyquestioncheck(){
for(k =0;k<4;k++){
sensorValue1=1023;
while (sensorValue1==1023){
sensorValue1 = analogRead(analogInPin1);
for(i = 0; i<8; i++)
{
if (sensorValue1 < upperLimit[i] && sensorValue1 >= lowerLimit[i]){
tone(speaker,frequency[i],60);
easyanswer[k]=frequency[i];
}
}
}
if(easyanswer[k] == easyques[k]){
digitalWrite(hijau,HIGH);
delay(200);
digitalWrite(hijau,LOW);
}
if(easyanswer[k] != easyques[k]){
digitalWrite(merah,HIGH);
delay(200);
digitalWrite(merah,LOW);
}
}
}

void medquestion(){
for(int j =0;j<4;j++){
digitalWrite(speaker,HIGH);
int randomfrequency = frequency[random(15)];
medques[j]=randomfrequency;
tone(speaker,randomfrequency,300);
digitalWrite(speaker,LOW);
delay(500);
Serial.println(medques[j]);
}
}

void medquestioncheck(){
for(k =0;k<4;k++){
sensorValue1=1023;
sensorValue2=1023;
while (sensorValue1==1023&&sensorValue2==1023){
sensorValue1 = analogRead(analogInPin1);
for(i = 0; i<8; i++)
{
if (sensorValue1 < upperLimit[i] && sensorValue1 >= lowerLimit[i]){
tone(speaker,frequency[i],60);
medanswer1[k]=frequency[i];
}
sensorValue2 = analogRead(analogInPin2);
for(int i = 0; i<8; i++)
{
if (sensorValue2 < upperLimit[i] && sensorValue2 >= lowerLimit[i]){
tone(speaker,frequency[i+8],60);
medanswer2[k]=frequency[i+8];
}
}
}
}
if(medanswer1[k] == medques[k]|| medanswer2[k] == medques[k]){
digitalWrite(hijau,HIGH);
delay(200);
digitalWrite(hijau,LOW);
}
if(medanswer1[k] != medques[k]&& medanswer2[k] != medques[k]){
digitalWrite(merah,HIGH);
delay(200);
digitalWrite(merah,LOW);
}
}
}

void hardquestion(){
for(int j =0;j<4;j++){
digitalWrite(speaker,HIGH);
int randomfrequency = frequency[random(24)];
hardques[j]=randomfrequency;
tone(speaker,randomfrequency,300);
digitalWrite(speaker,LOW);
delay(500);
Serial.println(hardques[j]);
}
}

void hardquestioncheck(){
for(k =0;k<4;k++){
sensorValue1=1023;
sensorValue2=1023;
sensorValue3=1023;
while (sensorValue1==1023&&sensorValue2==1023&&sensorValue3==1023){
sensorValue1 = analogRead(analogInPin1);
for(i = 0; i<8; i++)
{
if (sensorValue1 < upperLimit[i] && sensorValue1 >= lowerLimit[i]){
tone(speaker,frequency[i],60);
hardanswer1[k]=frequency[i];
}
sensorValue2 = analogRead(analogInPin2);
for(int i = 0; i<8; i++)
{
if (sensorValue2 < upperLimit[i] && sensorValue2 >= lowerLimit[i]){
tone(speaker,frequency[i+8],60);
hardanswer2[k]=frequency[i+8];
}
}
sensorValue3 = analogRead(analogInPin3);
for(int i = 0; i<9; i++)
{
if (sensorValue3 < upperLimit[i] && sensorValue3 >= lowerLimit[i]){
tone(speaker,frequency[i+16],60);
hardanswer3[k]=frequency[i+16];
}
}
}
}
if(hardanswer1[k] == hardques[k]|| hardanswer2[k] == hardques[k]||
hardanswer3[k] == hardques[k]){
digitalWrite(hijau,HIGH);
delay(200);
digitalWrite(hijau,LOW);
}
if(hardanswer1[k] != hardques[k]&& hardanswer2[k] != hardques[k]&&
hardanswer3[k] != hardques[k]){
digitalWrite(merah,HIGH);
delay(200);
digitalWrite(merah,LOW);
}
}
}

nnn
#define analogInPin1 A3
#define analogInPin2 A4
#define analogInPin3 A5
#define speaker 8
#define EASY 2
#define MED 3
#define HARD 4
#define merah 5
#define hijau 6

int sensorValue1 = 0;
int sensorValue2 = 0;
int sensorValue3 = 0;
int easyques[4]={};
int easyanswer[4]={};
int medques[4]={};
int medanswear1[4]={};
int medanswear2[4]={};
int hardques[4]={};
int hardanswer1[4]={};
int hardanswer2[4]={};
int hardanswer3[4]={};
int i,j,k;

int frequency[] = {262, 278, 294, 312, 330, 349, 371, 392,
416, 440, 467, 493, 523, 554, 587, 622,
660, 698, 739, 783, 830, 880, 932, 987, 1046};

int upperLimit[] = {50, 150, 300, 450, 650,


800, 900, 960, 1000};

int lowerLimit[] = {0, 51, 151, 301, 451,


651, 801, 901, 961};

void setup() {
pinMode (EASY,INPUT);
pinMode (MED,INPUT);
pinMode (HARD,INPUT);
pinMode (speaker, OUTPUT);
pinMode (hijau, OUTPUT);
pinMode (merah, OUTPUT);
Serial.begin(9600);
}

void loop() {
if(digitalRead(EASY)== LOW){
easyquestion();
easyquestioncheck();
}
else if(digitalRead(MED)== LOW){
medquestion();
medquestioncheck();
}
else if(digitalRead(HARD)== LOW){
hardquestion();
hardquestioncheck();
}
else {
readMelody();
}

//Serial.print("Value1 = ");
//Serial.println(sensorValue1);
//Serial.print("Value2 = ");
//Serial.println(sensorValue2);
//Serial.print("Value3 = ");
//Serial.println(sensorValue3);
Serial.println(frequency[i]);
}

void readMe lody() {


sensorValue1 = analogRead(analogInPin1);
for(int i = = 0; i<8; i++)
{
if (sensorValue1 < upperLimit[i] && sensorValue1 >= lowerLimit[i])
tone(speaker ,frequency[i], 60);
}
}
sensorValue2 = analogRead(analogInPon2);
for(int i = 0; i<8; i++)
{
if (sensorValue2 < upperLimit[i] && sensorValue1 >= lowerLimit[i]
tone(speaker ,frequency[i],60);
}
}
sensorValue3 = analogRead(analogInPin3);
for(int i = 0; i<9 i++)
{
if (sensorValue3 < upperLimit[i] && sensorValue3 >= lowerLimit[i])
tone(speaker,frequency[i+16],60);
}
}

void easyquestion(){
for(int j =0;j<4;j++){
digitalWrite(speaker,HIGH);
int randomfrequency = frequency[random(7)];
easyques[j]=randomfrequency;
tone(speaker,randomfrequency,300);
digitalWrite(speaker,LOW);
delay(500);
Serial.println(easyques[j]);
}
}

void easyquestioncheck(){
for(k =0;k<4;k++){
sensorValue1=1023;
while (sensorValue1==1023){
sensorValue1 = analogRead(analogInPin1);
for(i = 0; i<8; i++)
{
if (sensorValue1 < upperLimit[i] && sensorValue1 >= lowerLimit[i]){
tone(speaker,frequency[i],60);
easyanswer[k]=frequency[i];
}
}
}
if(easyanswer[k] == easyques[k]){
digitalWrite(hijau,HIGH);
delay(200);
digitalWrite(hijau,LOW);
}
if(easyanswer[k] != easyques[k]){
digitalWrite(merah,HIGH);
delay(200);
digitalWrite(merah,LOW);
}
}
}

void medquestion(){
for(int j =0;j<4;j++){
digitalWrite(speaker,HIGH);
int randomfrequency = frequency[random(15)];
medques[j]=randomfrequency;
tone(speaker,randomfrequency,300);
digitalWrite(speaker,LOW);
delay(500);
Serial.println(medques[j]);
}
}

void medquestioncheck(){
for(k =0;k4;k++){
sensorValue1=1023;

You might also like