HRCW

ENGINEERING DATA SHEET RELAY SOCKET

2 AMP

BASIC SOCKET SERIES DESIGNATION FOR:

SERIES F250, F257, W260, WB260, 144

DIMENSIONS
34.00

26.9 ± 0.2

19.00

10.30
5.08
5.08
10.16
15.24

7.1
5.6
4.8

1.0

BOTTOM MOUNT TOP MOUNT

HRCW-1M HRCW-22M

GENERAL CHARACTERISTICS
Temperature range -65°C to +125°C
Weight 10 grams
Dielectric strength
- Contact to contact at sea level 2700 Vrms / 50 Hz
- Coil to ground at sea level 2250 Vrms / 50 Hz
Contact to contact at altitude 25,000 m 560 Vrms / 50 Hz
Contact to ground at altitude 25,000 m 500 Vrms / 50 Hz

North America Europe, SA Asia-Pacific Ltd.

6900 Orangethorpe Ave. 2 Rue Goethe 20/F Shing Hing Commercial Bldg.
P.O. Box 5032 57430 Sarralbe 21-27 Wing Kut Street
Buena Park, CA 90622 USA France Central, Hong Kong

Tel: (01) 714-736-7599 Tel: (33) 3 87 97 98 97 Tel: (852) 2 191 2886

www.leachintl.com Fax: (01) 714-670-1145 Fax: (33) 3 87 97 84 04 Fax: (852) 2 389 5803

Data sheets are for initial product selection and comparison. Contact Leach International prior to choosing a component.

Date of issue: 3/06 - 78 - Page 1 of 1

 S600/S601
ENGINEERING DATA SHEET SOCKET FOR 6 POLE RELAY
10 AMP

BASIC SOCKET SERIES DESIGNATION FOR:

SERIES F600, F601

In accordance with MIL-S-12883/47

For relays 6 PDT/10A MIL-PRF-6106/8-CECC16101-020

MATERIALS

Socket body Thermoset plastic per MIL-M-14, SDG-F

Grommet Silicone rubber per ZZ-R-765
Hardware Stainless Steel

GENERAL CHARACTERISTICS
Crimp tool for 16 gauge contacts M22520/1-01 or 7-0l; with positioner, M22520/1-02
or 7-03
Insertion and extraction tool M81969/14-03
Weight 65g max.
Temperature range -70C to +125°C
This connection is designed to the standards and requirements of Mil-S-12883/47 Contacts and hardware are
provided disassembled in a plastic bag. Tolerances are ±0.25mm unless otherwise noted.

North America Europe, SA Asia-Pacific Ltd.

6900 Orangethorpe Ave. 2 Rue Goethe 20/F Shing Hing Commercial Bldg.
P.O. Box 5032 57430 Sarralbe 21-27 Wing Kut Street
Buena Park, CA 90622 USA France Central, Hong Kong

Tel: (01) 714-736-7599 Tel: (33) 3 87 97 98 97 Tel: (852) 2 191 2886

www.leachintl.com Fax: (01) 714-670-1145 Fax: (33) 3 87 97 84 04 Fax: (852) 2 389 5803

Data sheets are for initial product selection and comparison. Contact Leach International prior to choosing a component.

Date of issue: 3/06 -2- Page 1 of 3

MOUNTING HARDWARE DIMENSIONS S600/S601

CODE 8 CODE 7:
(05-284-15)
LOOSE UNC STUDS PER MIL-S-12883/47
LEACH P/N BOTTOM MOUNT TOP MOUNT LOOSE METRIC HARDWARE
2.36

0.1
TOP MOUNT

2.8 ±

2.4 MAX
5.58
22.6 MAX

2.4 MAX

2.4 MAX
27.6 MAX

MOUNTING HOLE:5,3 mm MOUNTING HOLE:3,6 mm

MOUNTING TORQUE
NUT 2,8: 0,45 Nm NUT 4,8: 2 Nm FOR RELAYS WITH CODE B TERMINALS
MOUNTING HOLE:3,6 mm
CODE 9

FIXED UNC STUDS PER MIL-S-12883/47

BOTTOM MOUNT TOP MOUNT
25.40
38.1

2.4 MAX

2.4 MAX

27.3

36.5 MOUNTING HOLE:5,3 mm MOUNTING HOLE:3,6 mm

43.7 MOUNTING TORQUE
NUT 2,8: 0,45 Nm NUT 4,8: 2 Nm

Unless otherwise specified tolerances are ±0.13mm

TERMINAL LAYOUT

MOUNTING HOLE LAYOUT

CODE A S600 CODE B S601
36.5

3 2 X1 1 3 2 1
A A
X1
B B
40.64

C C
25.4

D D

E E
X2
F F
X2

28.2

Date of issue: 3/06 -3- Page 2 of 3

WIRE GAUGE TO BE SEALED BY THE GROMMET S600/S601

Code A
Contact size 16-16 1.65mm to 2.76mm

CONTACT SIZE AND STYLE

Code 0 Code 8
Contacts not supplied Coil Contacts
(11-16-533)
Insertion side: AWG 16-18-20
relay side: AWG 16
In accordance with Mil-C-39029-533
Quantity: 20

S600 A 9 A 8
1-Basic Series Designation________________________| | | | |
2-Terminal Types (A,B)_________________________________| | | |
3-Mounting Hardware (4,7,8,9)______________________________| | |
4-Grommet To Seal On Wire Insulation (A)_______________________| |
5-Contacts Size And Styles (0,8)___________________________________|

MS NUMBER CROSS REFERENCE

MS REFERENCE S600/S601 REFERENCE

M12883/47-001 S600-A8A8
M12883/47-002 S601-B8A8
M12883/47-004 S600-A9A8
M12883/47-005 S601-B9A8

Date of issue: 3/06 -4- Page 3 of 3

 SM-1000-003
ENGINEERING DATA SHEET TRACK MOUNT RELAY SOCKET
5 AMP

BASIC SOCKET SERIES DESIGNATION FOR:

Series X (Track Mount)

Series TD-1609, TD-1610 (Track Mount)

DESIGNED TO THE STANDARDS AND REQUIREMENTS OF:

MIL-S-12883/52

APPLICABLE TRACK:
MT-3000-03

SOCKET TRACK DRAWING

.150 TYP

.375

1 2 X2 3
B
A

.150 TYP
X1
POLARIZING HOLE

.800

.770 MAX

GENERAL CHARACTERISTICS
1. Supplied with No. 20 contacts and No. 20 crimp.
2. Standard tolerances .xx ±.01; xxx ±.005.
3. Weight .016 lb. max.
4. Used in conjunction with MT-3000-003

North America Europe, SA Asia-Pacific Ltd.

6900 Orangethorpe Ave. 2 Rue Goethe 20/F Shing Hing Commercial Bldg.
P.O. Box 5032 57430 Sarralbe 21-27 Wing Kut Street
Buena Park, CA 90622 USA France Central, Hong Kong

Tel: (01) 714-736-7599 Tel: (33) 3 87 97 98 97 Tel: (852) 2 191 2886

www.leachintl.com Fax: (01) 714-670-1145 Fax: (33) 3 87 97 84 04 Fax: (852) 2 389 5803

Data sheets are for initial product selection and comparison. Contact Leach International prior to choosing a component.

Date of issue: 3/06 -5- Page 1 of 1

 ENGINEERING DATA SHEET MT-3000-003
RELAY SOCKET TRACK

BASIC SOCKET SERIES DESIGNATION FOR:

Series SM Sockets (Track Mount)

DESIGNED TO THE STANDARDS AND REQUIREMENTS OF:

MIL-S-12883/53

SOCKET TRACK DRAWING

.166 DIA HOLE
.100 X .302 DIA
C'SINK (2 PLACES)

1.220 1.850

1.625 MAX 1.060 MAX

GENERAL CHARACTERISTICS
Used in conjunction with SM-1000-003, SM-1001-003 and SM-1002-003 track mount relay sockets.
Standard tolerances .xx ±.01; xxx ±.005.
Weight .056 lb. max.
M12883/53-001.....[MT-3000-003]

North America Europe, SA Asia-Pacific Ltd.

6900 Orangethorpe Ave. 2 Rue Goethe 20/F Shing Hing Commercial Bldg.
P.O. Box 5032 57430 Sarralbe 21-27 Wing Kut Street
Buena Park, CA 90622 USA France Central, Hong Kong

Tel: (01) 714-736-7599 Tel: (33) 3 87 97 98 97 Tel: (852) 2 191 2886

www.leachintl.com Fax: (01) 714-670-1145 Fax: (33) 3 87 97 84 04 Fax: (852) 2 389 5803

Data sheets are for initial product selection and comparison. Contact Leach International prior to choosing a component.

Date of issue: 3/06 - 39 - Page 1 of 1

 SM-1001-003
ENGINEERING DATA SHEET TRACK MOUNT RELAY SOCKET
10 AMP

BASIC SOCKET SERIES DESIGNATION FOR:

Series YC (Track Mount)

DESIGNED TO THE STANDARDS AND REQUIREMENTS OF:

MIL-S-12883/52

APPLICABLE TRACK:
MT-3000-003

SOCKET TRACK DRAWING

.200 TYP

.100 TYP
.115 TYP
1 2 3
C
.230 TYP X2
B .790
X1
A

.800

.770 MAX

GENERAL CHARACTERISTICS
1. Supplied with No. 20 contacts and No. 20 crimp.
2. Standard tolerances .xx ±.01; xxx ±.005.
3. Weight .031 lb. max.
4. Used in conjunction with MT-3000-003

North America Europe, SA Asia-Pacific Ltd.

6900 Orangethorpe Ave. 2 Rue Goethe 20/F Shing Hing Commercial Bldg.
P.O. Box 5032 57430 Sarralbe 21-27 Wing Kut Street
Buena Park, CA 90622 USA France Central, Hong Kong

Tel: (01) 714-736-7599 Tel: (33) 3 87 97 98 97 Tel: (852) 2 191 2886

www.leachintl.com Fax: (01) 714-670-1145 Fax: (33) 3 87 97 84 04 Fax: (852) 2 389 5803

Data sheets are for initial product selection and comparison. Contact Leach International prior to choosing a component.

Date of issue: 3/06 -6- Page 1 of 1

 ENGINEERING DATA SHEET MT-3000-003
RELAY SOCKET TRACK

BASIC SOCKET SERIES DESIGNATION FOR:

Series SM Sockets (Track Mount)

DESIGNED TO THE STANDARDS AND REQUIREMENTS OF:

MIL-S-12883/53

SOCKET TRACK DRAWING

.166 DIA HOLE
.100 X .302 DIA
C'SINK (2 PLACES)

1.220 1.850

1.625 MAX 1.060 MAX

GENERAL CHARACTERISTICS
Used in conjunction with SM-1000-003, SM-1001-003 and SM-1002-003 track mount relay sockets.
Standard tolerances .xx ±.01; xxx ±.005.
Weight .056 lb. max.
M12883/53-001.....[MT-3000-003]

North America Europe, SA Asia-Pacific Ltd.

6900 Orangethorpe Ave. 2 Rue Goethe 20/F Shing Hing Commercial Bldg.
P.O. Box 5032 57430 Sarralbe 21-27 Wing Kut Street
Buena Park, CA 90622 USA France Central, Hong Kong

Tel: (01) 714-736-7599 Tel: (33) 3 87 97 98 97 Tel: (852) 2 191 2886

www.leachintl.com Fax: (01) 714-670-1145 Fax: (33) 3 87 97 84 04 Fax: (852) 2 389 5803

Data sheets are for initial product selection and comparison. Contact Leach International prior to choosing a component.

Date of issue: 3/06 - 39 - Page 1 of 1

 SM-1002-003
ENGINEERING DATA SHEET TRACK MOUNT RELAY SOCKET
5 AMP

BASIC SOCKET SERIES DESIGNATION FOR:

Series Y (Track Mount)

DESIGNED TO THE STANDARDS AND REQUIREMENTS OF:

MIL-S-12883/52

APPLICABLE TRACK:
MT-3000-003

SOCKET TRACK DRAWING

.150 TYP

1 2-X2 3
D
C
.790
.150 TYP B
A
+X1

.800

.770 MAX

GENERAL CHARACTERISTICS
1. Supplied with No. 20 contacts and No. 20 crimp.
2. Standard tolerances .xx ±.01; xxx ±.005.
3. Weight .031 lb. max.
4. Used in conjunction with MT-3000-003

North America Europe, SA Asia-Pacific Ltd.

6900 Orangethorpe Ave. 2 Rue Goethe 20/F Shing Hing Commercial Bldg.
P.O. Box 5032 57430 Sarralbe 21-27 Wing Kut Street
Buena Park, CA 90622 USA France Central, Hong Kong

Tel: (01) 714-736-7599 Tel: (33) 3 87 97 98 97 Tel: (852) 2 191 2886

www.leachintl.com Fax: (01) 714-670-1145 Fax: (33) 3 87 97 84 04 Fax: (852) 2 389 5803

Data sheets are for initial product selection and comparison. Contact Leach International prior to choosing a component.

Date of issue: 3/06 -7- Page 1 of 1

 ENGINEERING DATA SHEET MT-3000-003
RELAY SOCKET TRACK

BASIC SOCKET SERIES DESIGNATION FOR:

Series SM Sockets (Track Mount)

DESIGNED TO THE STANDARDS AND REQUIREMENTS OF:

MIL-S-12883/53

SOCKET TRACK DRAWING

.166 DIA HOLE
.100 X .302 DIA
C'SINK (2 PLACES)

1.220 1.850

1.625 MAX 1.060 MAX

GENERAL CHARACTERISTICS
Used in conjunction with SM-1000-003, SM-1001-003 and SM-1002-003 track mount relay sockets.
Standard tolerances .xx ±.01; xxx ±.005.
Weight .056 lb. max.
M12883/53-001.....[MT-3000-003]

North America Europe, SA Asia-Pacific Ltd.

6900 Orangethorpe Ave. 2 Rue Goethe 20/F Shing Hing Commercial Bldg.
P.O. Box 5032 57430 Sarralbe 21-27 Wing Kut Street
Buena Park, CA 90622 USA France Central, Hong Kong

Tel: (01) 714-736-7599 Tel: (33) 3 87 97 98 97 Tel: (852) 2 191 2886

www.leachintl.com Fax: (01) 714-670-1145 Fax: (33) 3 87 97 84 04 Fax: (852) 2 389 5803

Data sheets are for initial product selection and comparison. Contact Leach International prior to choosing a component.

Date of issue: 3/06 - 39 - Page 1 of 1

 SO-1021-7127/7126
ENGINEERING DATA SHEET RELAY SOCKET
10 AMP

BASIC SOCKET SERIES DESIGNATION FOR:

Series V110, V210, V310, V710, F410, P510

DESIGNED TO THE STANDARDS AND REQUIREMENTS OF:

MS 25462-1

SOCKET DRAWING

57.94 MAX

46.84 ±.13

12.70 ±.13
HARDWARE MOUNTING
4.98 ±.13 DIA 10.31 DIA X .13 BOSS
3 HOLES 23.42 6 PLACES
2
3

1
X2
Y2
A

9.53
B

38.89 MAX 19.05

C

4.01 ±.28 4.01 ±.28

X1
Y1
D

2.79 ±.13 DIA

LOCATING PIN HOLE
3 PLACES

2.36
33.02 DIA TOP MOUNTED BOTTOM MOUNTED

6.76 12.12
16.74 MAX

GENERAL CHARACTERISTICS
1. Supplied with mounting hardware (SO-1021-7127) or without mounting hardware (SO-1021-7126).
2. Standard tolerances .xx ±.01; xxx ±.005.
3. Weight .080 lb. max.
4. Temperature range -55° C to +125° C

North America Europe, SA Asia-Pacific Ltd.

6900 Orangethorpe Ave. 2 Rue Goethe 20/F Shing Hing Commercial Bldg.
P.O. Box 5032 57430 Sarralbe 21-27 Wing Kut Street
Buena Park, CA 90622 USA France Central, Hong Kong

Tel: (01) 714-736-7599 Tel: (33) 3 87 97 98 97 Tel: (852) 2 191 2886

www.leachintl.com Fax: (01) 714-670-1145 Fax: (33) 3 87 97 84 04 Fax: (852) 2 389 5803

Data sheets are for initial product selection and comparison. Contact Leach International prior to choosing a component.

Date of issue: 3/06 -8- Page 1 of 1

 SO-1048-8308/8518
ENGINEERING DATA SHEET RELAY SOCKET
12 AMP

BASIC SOCKET SERIES DESIGNATION FOR:

Series K
Series TDH-8070, TDH-8080
TDH-8050, TDH-8060, VS400

DESIGNED TO THE STANDARDS AND REQUIREMENTS OF:

MIL-S-12883/40

HARDWARE MOUNTING

SOCKET DRAWING MOUNTING DETAIL 3 PLACES

.200 .06 R SILICONE RUBBER

TYP RELAY
4 PLACES GASKET

3 2 X2 1
D

C
.625 B
1.000
.312 .290 REF
A
X1 .95
.093 MAX
1.075 .116+
- .003 DIA PANEL
3 PLACES
1.406
SOCKET
1.71
BOTTOM MOUNT-CLEARANCE
HOLE FOR .192 SCREW
TOP MOUNT-CLEARANCE 1.406
HOLE FOR .112 SCREW
.148
.312

.093 .517
1.035
.22
.89
.625 .05 R
4 PLACES
1.110

MOUNTING DIMENSIONS

GENERAL CHARACTERISTICS
1. Supplied with mounting hardware and No. 16 contacts, No. 16 crimp (SO-1048-8308); No. 16 contacts, No. 20 crimp (SO-1048-8518).
2. Standard tolerances .xx ±.01; xxx ±.005
3. Weight .115 lb. max
4. Temperature range -70° C to +125° C

North America Europe, SA Asia-Pacific Ltd.

6900 Orangethorpe Ave. 2 Rue Goethe 20/F Shing Hing Commercial Bldg.
P.O. Box 5032 57430 Sarralbe 21-27 Wing Kut Street
Buena Park, CA 90622 USA France Central, Hong Kong

Tel: (01) 714-736-7599 Tel: (33) 3 87 97 98 97 Tel: (852) 2 191 2886

www.leachintl.com Fax: (01) 714-670-1145 Fax: (33) 3 87 97 84 04 Fax: (852) 2 389 5803

Data sheets are for initial product selection and comparison. Contact Leach International prior to choosing a component.

Date of issue: 3/06 -9- Page 1 of 1

 SO-1048-8776/8779
ENGINEERING DATA SHEET RELAY SOCKET
10 AMP

BASIC SOCKET SERIES DESIGNATION FOR:

Series KA, CS400

DESIGNED TO THE STANDARDS AND REQUIREMENTS OF:

MIL-S-12883/40

SOCKET DRAWING HARDWARE MOUNTING

MOUNTING DETAIL 3 PLACES

1
.200 SILICONE RUBBER
.06 R GASKET
RELAY
TYP 4 PLACES

3 2 1
5 3 2 1
D D
X2 X2
C .200 TYP C
1.00 .625 .25 B B .290 REF
.197 REF
X1
A X1 A 1.092
.093 MAX
PANEL
.37
1.075 .116+
- .003 DIA 2
3 PLACES
+ 3 PLACES
- .010 SOCKET
1.406
+
- .010 BOTTOM MOUNT-CLEARANCE 1.406
1.71 HOLE FOR .192 SCREW
+
- .010 TOP MOUNT-CLEARANCE
HOLE FOR .112 SCREW .148
.312
MOUNTED STUD NO. 10-32 UNF-2A .517
STAINLESS STEEL 3 PLACES 1.035
NO. 4-40 UNC-2A
3 PLACES 3 PLACES
.625
.093
.05 R
.220 4 PLACES
1.110
.89 MAX
NO. 4-40 UNC-2A
3 PLACES MOUNTING DIMENSIONS
GENERAL CHARACTERISTICS
[1] Supplied with mounting hardware No. 16 contacts, and No. 16 crimp for coil 115 Vac, rear release (SO-1048-8776)
[2] Supplied with mounting hardware No. 16 contacts, and No. 16 crimp for coil 28 Vac, rear release (SO-1048-8779)
3. Standard tolerances .xx ±.01; xxx ±.005.
4. Weight .132 lb. max
[5] Shape optional
6. Temperature range -70° C to +125° C

North America Europe, SA Asia-Pacific Ltd.

6900 Orangethorpe Ave. 2 Rue Goethe 20/F Shing Hing Commercial Bldg.
P.O. Box 5032 57430 Sarralbe 21-27 Wing Kut Street
Buena Park, CA 90622 USA France Central, Hong Kong

Tel: (01) 714-736-7599 Tel: (33) 3 87 97 98 97 Tel: (852) 2 191 2886

www.leachintl.com Fax: (01) 714-670-1145 Fax: (33) 3 87 97 84 04 Fax: (852) 2 389 5803

Data sheets are for initial product selection and comparison. Contact Leach International prior to choosing a component.

Date of issue: 3/06 - 10 - Page 1 of 1

 SO-1049-8309/8987
ENGINEERING DATA SHEET RELAY SOCKET
12 AMP

BASIC SOCKET SERIES DESIGNATION FOR:

Series J

DESIGNED TO THE STANDARDS AND REQUIREMENTS OF:

MIL-S-12883/41

HARDWARE MOUNTING
SOCKET DRAWING
MOUNTING DETAIL

RELAY
.500
.06 R
4 PLACES .200 TYP .032 +.006 -.003
2 PLACES
.95
.093 MAX
.100 POLARIZING HOLE SILICONE RUBBER
PANEL
GASKET
3 2 X2 1
B
SOCKET
A
X1 .038 +
- .003
2 PLACES
.200 1.075
.116 +
- .003 DIA MOUNTING DIMENSIONS
.09 R 1.406 2 PLACES
4 PLACES 1.71 BOTTOM MOUNT- CLEARANCE
HOLE FOR .192 SCREW 1.110
.05 R
TOP MOUNT-CLEARANCE
4 PLACES
.093 HOLE FOR .112 SCREW
.100, 2 PLACES
.555
.22
.687 .277
.890
.148

1.406

GENERAL CHARACTERISTICS
1. Supplied with mounting hardware and No. 16 contacts, No. 16 crimp (see socket drawing illustration SO-1049-8309); No. 16
contacts, No. 20 crimp for SO-1049-8987 (not illustrated)

2. Standard tolerances .xx ±.01; xxx ±.005

3. Weight .073 lb. max

4. Temperature range -70° C to +125° C

North America Europe, SA Asia-Pacific Ltd.

6900 Orangethorpe Ave. 2 Rue Goethe 20/F Shing Hing Commercial
P.O. Box 5032 57430 Sarralbe Bldg.
Buena Park, CA 90622 USA France 21-27 Wing Kut Street
Central, Hong Kong
Tel: (01) 714-736-7599 Tel: (33) 3 87 97 98 97
www.leachintl.com Fax: (01) 714-670-1145 Fax: (33) 3 87 97 84 04 Tel: (852) 2 191 2886
Fax: (852) 2 389 5803

Data sheets are for initial product selection and comparison. Contact Leach International prior to choosing a component.

Date of issue: 3/06 - 11 - Page 1 of 1

 SO-1049-8772/8774
ENGINEERING DATA SHEET RELAY SOCKET
10 AMP

BASIC SOCKET SERIES DESIGNATION FOR:

Series JA

DESIGNED TO THE STANDARDS AND REQUIREMENTS OF:

MIL-S-12883/41

SOCKET DRAWING HARDWARE MOUNTING

MOUNTING DETAIL

.06 R MIN
4 PLACES
.500
.200 TYP .19 R MAX .44 MIN
.200 2 PLACES .197 REF
2 (.290)
1.092
MAX
3 2 X2 1 3 2 X2 1
.093 MAX
B B
SILICONE RUBBER
.52 A A GASKET
PANEL
X1 X1

.100 1.075
SHAPE OPTIONAL
1.406
1.72 1.110
BOTTOM MOUNT-CLEARANCE .05 R
1
HOLE FOR .192 SCREW 4 PLACES
TOP MOUNT-CLEARANCE
HOLE FOR .112 SCREW .555
MOUNTING STUD NO. 10-32 UNF-2A
STAINLESS STEEL 2 PLACES
NO. 4-40 UNC-2A
.277
2 PLACES
2 PLACES .148
.093 TOLERANCE:
1.406 .XX = .03
.220 .XXX = .010
.890

NO. 4-40 UNC-2A MOUNTING DIMENSIONS

2 PLACES

GENERAL CHARACTERISTICS
[1] Supplied with mounting hardware and No. 16 contacts, No. 16 crimp for coil 115 Vac, rear release (SO-1049-8772)

[2] Supplied with mounting hardware and No. 16 contacts, No. 16 crimp for coil 28 Vac, rear release (SO-1049-8774)

3. Standard tolerances .xx ±.01; xxx ±.005

4. Weight .073 lb. max
[5] Temperature range -70° C to +125° C

North America Europe, SA Asia-Pacific Ltd.

6900 Orangethorpe Ave. 2 Rue Goethe 20/F Shing Hing Commercial
P.O. Box 5032 57430 Sarralbe Bldg.
Buena Park, CA 90622 USA France 21-27 Wing Kut Street
Central, Hong Kong
Tel: (01) 714-736-7599 Tel: (33) 3 87 97 98 97
www.leachintl.com Fax: (01) 714-670-1145 Fax: (33) 3 87 97 84 04 Tel: (852) 2 191 2886
Fax: (852) 2 389 5803

Data sheets are for initial product selection and comparison. Contact Leach International prior to choosing a component.

Date of issue: 3/06 - 12 - Page 1 of 1

 SO-1055-8690/10147
ENGINEERING DATA SHEET RELAY SOCKET
12 AMP

BASIC SOCKET SERIES DESIGNATION FOR:

Series JL
Series TDH-6050, TDH-6060, TDH-6070

DESIGNED TO THE STANDARDS AND REQUIREMENTS OF:

MIL-S-12883/41

SOCKET DRAWING HARDWARE MOUNTING

.700 .06 R MIN

4 PLACES MOUNTING DETAIL 2 PLACES
.500
.200 TYP .19 R MAX
.200 2 PLACES
.100
RELAY
3 2 X2 1
B
.52 A
Y1 Y2

X1

1.07
.100 1.075 SILICONE RUBBER
.093 MAX
4 GASKET
PANEL

1.406
SOCKET
1.71 POLARIZING PIN

MOUNTING DIMENSIONS
NO. 10-32 UNF-2A 1.110
2 PLACES
BOTTOM MOUNT-CLEARANCE .05 R
HOLE FOR .192 SCREW 4 PLACES
NO. 4-40 UNC-2A TOP MOUNT-CLEARANCE
2 PLACES
HOLE FOR .112 SCREW .555
.093

.220 .277
.890 .148

NO. 4-40 UNC-2A

2 PLACES 1.406

GENERAL CHARACTERISTICS
1. Supplied with mounting hardware and No. 16 contacts, No. 16 crimp for power terminals; No. 22 contacts, No. 22 crimp for coil
terminals (SO-1055-8690); supplied with mounting hardware and No. 16 contacts with No. 20 crimp for power terminals; No. 22
contacts, No. 22 crimp for coil terminals (SO-1055-10147).
2. Standard tolerances .xx ±.01; xxx ±.005
3. Weight .058 lb. max
[4] Shape optional
[5] Temperature range -70° C to +125° C

North America Europe, SA Asia-Pacific Ltd.

6900 Orangethorpe Ave. 2 Rue Goethe 20/F Shing Hing Commercial
P.O. Box 5032 57430 Sarralbe Bldg.
Buena Park, CA 90622 USA France 21-27 Wing Kut Street
Central, Hong Kong
Tel: (01) 714-736-7599 Tel: (33) 3 87 97 98 97
www.leachintl.com Fax: (01) 714-670-1145 Fax: (33) 3 87 97 84 04 Tel: (852) 2 191 2886
Fax: (852) 2 389 5803

Data sheets are for initial product selection and comparison. Contact Leach International prior to choosing a component.

Date of issue: 3/06 - 13 - Page 1 of 1

 SO-1056-8691
ENGINEERING DATA SHEET RELAY SOCKET
12 AMP

BASIC SOCKET SERIES DESIGNATION FOR:

Series KL
Series TDH-7050, TDH-7060, TDH-7070

DESIGNED TO THE STANDARDS AND REQUIREMENTS OF:

MIL-S-12883/40

HARDWARE MOUNTING
SOCKET DRAWING
.200 .06 R MOUNTING DETAIL 3 PLACES
TYP 4 PLACES SILICONE RUBBER
RELAY
GASKET
3 2 X2 1
D

C
.625 B
1.000
.312 .290 REF
A .95
X1 .093 MAX
.200 TYP PANEL

1.075 .116+
- .003 DIA SOCKET
3 PLACES
1.406
BOTTOM MOUNT-CLEARANCE
HOLE FOR .192 SCREW
1.71 TOP MOUNT-CLEARANCE 1.406
HOLE FOR .112 SCREW
.148
.312

.517
.093 .100 1.035
3 PLACES
.22
.625 .05 R
.88 4 PLACES
1.110

MOUNTING DIMENSIONS

GENERAL CHARACTERISTICS
1. Supplied with mounting hardware No. 16 contacts, No. 16 crimp.
2. Standard tolerances .xx ±.01; xxx ±.005
3. Weight .118 lb. max
4. Temperature range -70° C to +125° C

North America Europe, SA Asia-Pacific Ltd.

6900 Orangethorpe Ave. 2 Rue Goethe 20/F Shing Hing Commercial
P.O. Box 5032 57430 Sarralbe Bldg.
Buena Park, CA 90622 USA France 21-27 Wing Kut Street
Central, Hong Kong
Tel: (01) 714-736-7599 Tel: (33) 3 87 97 98 97
www.leachintl.com Fax: (01) 714-670-1145 Fax: (33) 3 87 97 84 04 Tel: (852) 2 191 2886
Fax: (852) 2 389 5803

Data sheets are for initial product selection and comparison. Contact Leach International prior to choosing a component.

Date of issue: 3/06 - 14 - Page 1 of 1

 SO-1057-8912
ENGINEERING DATA SHEET RELAY SOCKET
25 AMP

BASIC SOCKET SERIES DESIGNATION FOR:

Series KC

DESIGNED TO THE STANDARDS AND REQUIREMENTS OF:

MIL-S-12883/48

SOCKET DRAWING .630

.06R MIN
4 PLACES
HARDWARE MOUNTING

.432 MOUNTING DETAIL 3 PLACES

.19R MAX
4 PLACES
RELAY
.234

3 2 1
SILICONE RUBBER
C
.312 GASKET
1.015 X2
MAX .625 X1 B

A
.093 MAX
PANEL
1.00
1.406 SOCKET

1.72 1.406

MOUNTING STUD .312

NO. 10-32 UNF-2A NO. 4-40 UNC-2A
STAINLESS STEEL
3 PLACES 3 PLACES .550
3 PLACES 1.100

1.00 .625
.093
BOTTOM MOUNT-CLEARANCE
1.07 HOLE FOR .192 SCREW 1.160 .05 R
.220 TOP MOUNT-CLEARANCE 4 PLACES
.890 HOLE FOR .112 SCREW

MOUNTING DIMENSIONS
NO. 4-40 UNC-2A SUGGESTED MOUNTING
3 PLACES HOLE LAYOUT

GENERAL CHARACTERISTICS
1. Supplied with mounting hardware No. 12 contacts, No. 12 crimp for power terminals; No. 16 contacts, No. 16 crimp for coil terminals.
2. Standard tolerances .xx ±.01; xxx ±.005
3. Weight .112 lb. max
4. Temperature range -70° C to +125° C

North America Europe, SA Asia-Pacific Ltd.

6900 Orangethorpe Ave. 2 Rue Goethe 20/F Shing Hing Commercial
P.O. Box 5032 57430 Sarralbe Bldg.
Buena Park, CA 90622 USA France 21-27 Wing Kut Street
Central, Hong Kong
Tel: (01) 714-736-7599 Tel: (33) 3 87 97 98 97
www.leachintl.com Fax: (01) 714-670-1145 Fax: (33) 3 87 97 84 04 Tel: (852) 2 191 2886
Fax: (852) 2 389 5803

Data sheets are for initial product selection and comparison. Contact Leach International prior to choosing a component.

Date of issue: 3/06 - 15 - Page 1 of 1

 SO-1058-8913
ENGINEERING DATA SHEET RELAY SOCKET
25 AMP

BASIC SOCKET SERIES DESIGNATION FOR:

Series KCL and T531

DESIGNED TO THE STANDARDS AND REQUIREMENTS OF:

MIL-S-12883/54

SOCKET DRAWING .06R MIN

HARDWARE MOUNTING
.630 4 PLACES
MOUNTING DETAIL 3 PLACES
.432
.19R MAX
4 PLACES
RELAY
.234

3 2 Y1 1 SILICONE RUBBER
C GASKET
.312
1.015 X2
MAX .625 X1 B

Y2 A .093 MAX
PANEL

1.00
SOCKET
1.406
1.406
1.72

MOUNTING STUD .312

NO. 10-32 UNF-2A NO. 4-40 UNC-2A
STAINLESS STEEL .550
3 PLACES 3 PLACES
3 PLACES 1.100

.625
.093
BOTTOM MOUNT-CLEARANCE
1.07 HOLE FOR .192 SCREW 1.160 .05 R
.220 TOP MOUNT-CLEARANCE 4 PLACES
HOLE FOR .112 SCREW
.890

MOUNTING DIMENSIONS
SUGGESTED MOUNTING
NO. 4-40 UNC-2A
3 PLACES HOLE LAYOUT

GENERAL CHARACTERISTICS
1. Supplied with mounting hardware No. 12, 16 and 20 contacts, No. 12, 16 and 20 crimps.
2. Standard tolerances .xx ±.01; xxx ±.005
3. Weight .120 lb. max
4. Temperature range -70° C to +125° C

North America Europe, SA Asia-Pacific Ltd.

6900 Orangethorpe Ave. 2 Rue Goethe 20/F Shing Hing Commercial Bldg.
P.O. Box 5032 57430 Sarralbe 21-27 Wing Kut Street
Buena Park, CA 90622 USA France Central, Hong Kong

Tel: (01) 714-736-7599 Tel: (33) 3 87 97 98 97 Tel: (852) 2 191 2886

www.leachintl.com Fax: (01) 714-670-1145 Fax: (33) 3 87 97 84 04 Fax: (852) 2 389 5803

Data sheets are for initial product selection and comparison. Contact Leach International prior to choosing a component.

Date of issue: 3/06 - 16 - Page 1 of 1

 SO-1059-8914
ENGINEERING DATA SHEET RELAY SOCKET
25 AMP

BASIC SOCKET SERIES DESIGNATION FOR:

Series KD

DESIGNED TO THE STANDARDS AND REQUIREMENTS OF:

MIL-S-12883/XX

SOCKET DRAWING HARDWARE MOUNTING

.06R MIN
.630 4 PLACES
MOUNTING DETAIL 3 PLACES
.432
POLARIZING PIN HOLE .19R MAX
.117 4 PLACES
RELAY
.234
.150
12 2 1 SILICONE RUBBER
C GASKET
.312 .300
1.015 13 -X2 .450
MAX .625 X1 B
.600
11
A
.093 MAX
PANEL
1.00
1.406 SOCKET

1.72 1.406

MOUNTING STUD
NO. 10-32 UNF-2A NO. 10-32 UNC-2A .312
STAINLESS STEEL
3 PLACES 3 PLACES
3 PLACES .550
1.100

.093
.29 .625
1.07
.220 BOTTOM MOUNT-CLEARANCE
.68 HOLE FOR .192 SCREW 1.160 .05 R
.88 .28 TOP MOUNT-CLEARANCE 4 PLACES
HOLE FOR .112 SCREW
SUGGESTED MOUNTING
NO. 4-40 UNC-2A HOLE LAYOUT
3 PLACES
MOUNTING DIMENSIONS

GENERAL CHARACTERISTICS
1. Supplied with mounting hardware and No. 12 contacts and crimp for power terminals; No. 16 contacts and crimp for coil terminals.
2. Standard tolerances .xx ±.01; xxx ±.005
3. Weight .132 lb. max
4. Temperature range -70° C to +125° C

North America Europe, SA Asia-Pacific Ltd.

6900 Orangethorpe Ave. 2 Rue Goethe 20/F Shing Hing Commercial
P.O. Box 5032 57430 Sarralbe Bldg.
Buena Park, CA 90622 USA France 21-27 Wing Kut Street
Central, Hong Kong
Tel: (01) 714-736-7599 Tel: (33) 3 87 97 98 97
www.leachintl.com Fax: (01) 714-670-1145 Fax: (33) 3 87 97 84 04 Tel: (852) 2 191 2886
Fax: (852) 2 389 5803

Data sheets are for initial product selection and comparison. Contact Leach International prior to choosing a component.

Date of issue: 3/06 - 17 - Page 1 of 1

 SO-1060-8915
ENGINEERING DATA SHEET RELAY SOCKET
25 AMP

BASIC SOCKET SERIES DESIGNATION FOR:

Series KDL

DESIGNED TO THE STANDARDS AND REQUIREMENTS OF:

MIL-S-12883/48

SOCKET DRAWING HARDWARE MOUNTING

.06R MIN
.630 4 PLACES MOUNTING DETAIL 3 PLACES
.432
.19R MAX
RELAY
.117 4 PLACES
.234
SILICONE RUBBER
12 2 1 GASKET
Y1 C

1.015 .312 13 -X2

MAX .625 X1 B

11
-Y2 .093 MAX
A
PANEL

1.00 SOCKET
1.406
BOTTOM MOUNT-CLEARANCE
1.71 HOLE FOR .192 SCREW
TOP MOUNT-CLEARANCE 1.406
HOLE FOR .112 SCREW
MOUNTING STUD .312
10-32 UNF-2A 4-40 UNC-2A
STAINLESS STEEL
3 PLACES 3 PLACES .550
3 PLACES
1.100

.625
1.07
.220 .05 R
1.160
.890 4 PLACES

4-40 UNC-2A
MOUNTING DIMENSIONS
3 PLACES SUGGESTED MOUNTING HOLE LAYOUT

GENERAL CHARACTERISTICS
1. Supplied with mounting hardware and No. 12 contacts and No.12 crimp for power terminals; No. 16 contacts, No. 16 crimp for coil
and auxiliary terminals; No. 20 contacts, No. 20 crimp for coil terminals.
2. Standard tolerances .xx ±.01; xxx ±.005
3. Weight .125 lb. max
4. Temperature range -70° C to +125° C

North America Europe, SA Asia-Pacific Ltd.

6900 Orangethorpe Ave. 2 Rue Goethe 20/F Shing Hing Commercial
P.O. Box 5032 57430 Sarralbe Bldg.
Buena Park, CA 90622 USA France 21-27 Wing Kut Street
Central, Hong Kong
Tel: (01) 714-736-7599 Tel: (33) 3 87 97 98 97
www.leachintl.com Fax: (01) 714-670-1145 Fax: (33) 3 87 97 84 04 Tel: (852) 2 191 2886
Fax: (852) 2 389 5803

Data sheets are for initial product selection and comparison. Contact Leach International prior to choosing a component.

Date of issue: 3/06 - 18 - Page 1 of 1

 SO-1061-8916
ENGINEERING DATA SHEET RELAY SOCKET
25 AMP

BASIC SOCKET SERIES DESIGNATION FOR:

Series KDA

DESIGNED TO THE STANDARDS AND REQUIREMENTS OF:

MIL-S-12883/48

HARDWARE MOUNTING
SOCKET DRAWING .06R MIN
.630 4 PLACES MOUNTING DETAIL 4 PLACES
.432
.19R MAX
.078 DIA X.355 RELAY
.117 4 PLACES
+.025 -.000 DEEP
POLARIZING HOLE .234
SILICONE RUBBER
12 2 1 GASKET
C
.312
1.015 .625
13 -X2
MAX X1 B

11 .093 MAX
A
PANEL

1.00 SOCKET
1.406
BOTTOM MOUNT-CLEARANCE
1.71 HOLE FOR .192 SCREW
TOP MOUNT-CLEARANCE
HOLE FOR .112 SCREW 1.406

MOUNTING STUD
10-32 UNF-2A 4-40 UNC-2A
STAINLESS STEEL
4 PLACES 4 PLACES
4 PLACES .625 1.100

1.07 1.160 .05 R

.220 4 PLACES
.88
MOUNTING DIMENSIONS
FOR TYPE "E" MOUNT
4-40 UNC-2A SUGGESTED MOUNTING
4 PLACES HOLE LAYOUT

GENERAL CHARACTERISTICS
1. Supplied with mounting hardware and No. 12 contacts, No. 12 crimp for power terminals; No. 16 contacts, No. 16 crimp for coil and
auxiliary terminals.
2. Standard tolerances .xx ±.01; xxx ±.005
3. Weight .122 lb. max
4. Temperature range -70° C to +125° C

North America Europe, SA Asia-Pacific Ltd.

6900 Orangethorpe Ave. 2 Rue Goethe 20/F Shing Hing Commercial Bldg.
P.O. Box 5032 57430 Sarralbe 21-27 Wing Kut Street
Buena Park, CA 90622 USA France Central, Hong Kong

Tel: (01) 714-736-7599 Tel: (33) 3 87 97 98 97 Tel: (852) 2 191 2886

www.leachintl.com Fax: (01) 714-670-1145 Fax: (33) 3 87 97 84 04 Fax: (852) 2 389 5803

Data sheets are for initial product selection and comparison. Contact Leach International prior to choosing a component.

Date of issue: 3/06 - 19 - Page 1 of 1

 SO-1062-8917
ENGINEERING DATA SHEET RELAY SOCKET
25 AMP

BASIC SOCKET SERIES DESIGNATION FOR:

Series KCA

DESIGNED TO THE STANDARDS AND REQUIREMENTS OF:

MIL-S-12883/48

.06R MIN HARDWARE MOUNTING

SOCKET DRAWING .630 4 PLACES
.432 MOUNTING DETAIL 4 PLACES
.19R MAX
4 PLACES
.234 RELAY

3 2 1
C
SILICONE RUBBER
.312 GASKET
1.015 X2
MAX .625 X1 B

A
.093 MAX
PANEL
1.00
1.406 SOCKET

1.72 1.406

MOUNTING STUD
NO. 10-32 UNF-2A NO. 4-40 UNC-2A .312
STAINLESS STEEL
4 PLACES 4 PLACES .550
4 PLACES
1.100

.625
.093
1.07 BOTTOM MOUNT-CLEARANCE .05 R
1.160
.220 HOLE FOR .192 SCREW 4 PLACES
TOP MOUNT-CLEARANCE
.890 HOLE FOR .112 SCREW

MOUNTING DIMENSIONS
NO. 4-40 UNC-2A SUGGESTED MOUNTING
4 PLACES HOLE LAYOUT

GENERAL CHARACTERISTICS
1. Supplied with mounting hardware and No. 12 contacts, No. 12 crimp for power terminals; No. 16 contacts, No. 16 crimp for coil
terminals.
2. Standard tolerances .xx ±.01; xxx ±.005
3. Weight .118 lb. max
4. Temperature range -70° C to +125° C

North America Europe, SA Asia-Pacific Ltd.

6900 Orangethorpe Ave. 2 Rue Goethe 20/F Shing Hing Commercial Bldg.
P.O. Box 5032 57430 Sarralbe 21-27 Wing Kut Street
Buena Park, CA 90622 USA France Central, Hong Kong

Tel: (01) 714-736-7599 Tel: (33) 3 87 97 98 97 Tel: (852) 2 191 2886

www.leachintl.com Fax: (01) 714-670-1145 Fax: (33) 3 87 97 84 04 Fax: (852) 2 389 5803

Data sheets are for initial product selection and comparison. Contact Leach International prior to choosing a component.

Date of issue: 3/06 - 20 - Page 1 of 1

 SO-1063-9033/9034
ENGINEERING DATA SHEET RELAY SOCKET
10/25 AMP

BASIC SOCKET SERIES DESIGNATION FOR:

Series JS, JC (9033)

Series JSA, JCA (9034)

DESIGNED TO THE STANDARDS AND REQUIREMENTS OF:

MIL-S-12883

HARDWARE MOUNTING
SOCKET DRAWING .630

.432 MOUNTING DETAIL 2 PLACES

.06 R MIN
.234 4 PLACES RELAY
.19 R MAX
.150 2 PLACES SILICONE RUBBER
.102
GASKET
.100
X2
3 2
.52 A

X1
.100 .093 MAX
1.00 PANEL

POLARIZING PIN HOLE 1.406

3 SOCKET
FOR JCA AND JSA 1.71
SERIES ONLY. (SO-1063-9034)
1.110
BOTTOM MOUNT-CLEARANCE .05 R
HOLE FOR .192 SCREW 4 PLACES
MOUNTING STUD
NO. 10-32 UNF-2A NO. 4-40 UNC-2A
STAINLESS STEEL TOP MOUNT-CLEARANCE
2 PLACES 2 PLACES
2 PLACES HOLE FOR .112 SCREW .555
.093 .93
.29 .277
1.07
.220
.88
.68
.28 1.406

NO. 4-40 UNC-2A

2 PLACES
MOUNTING DIMENSIONS

GENERAL CHARACTERISTICS
1. Supplied with mounting hardware and No. 12 contacts and crimp for power terminals; No. 16 contacts and crimp for coil terminals.
2. Standard tolerances .xx ±.01; xxx ±.005
[3] Shape optional.
4. Weight .056 lb. max
5. Temperature range -70° C to +125° C

North America Europe, SA Asia-Pacific Ltd.

6900 Orangethorpe Ave. 2 Rue Goethe 20/F Shing Hing Commercial Bldg.
P.O. Box 5032 57430 Sarralbe 21-27 Wing Kut Street
Buena Park, CA 90622 USA France Central, Hong Kong

Tel: (01) 714-736-7599 Tel: (33) 3 87 97 98 97 Tel: (852) 2 191 2886

www.leachintl.com Fax: (01) 714-670-1145 Fax: (33) 3 87 97 84 04 Fax: (852) 2 389 5803

Data sheets are for initial product selection and comparison. Contact Leach International prior to choosing a component.

Date of issue: 3/06 - 21 - Page 1 of 1

 SO-1063-9036
ENGINEERING DATA SHEET RELAY SOCKET
25 AMP

BASIC SOCKET SERIES DESIGNATION FOR:

Series JCL

DESIGNED TO THE STANDARDS AND REQUIREMENTS OF:

MIL-S-12883/XX

HARDWARE MOUNTING
SOCKET DRAWING .630
.06 R MIN
.432 4 PLACES MOUNTING DETAIL 2 PLACES

.234 .19 R MAX

RELAY
2 PLACES
.130 .117
.100
Y1 X2 SILICONE RUBBER
3 2
.52 A GASKET
Y2 X1
.100
.130 1.00 .093 MAX
1.406 PANEL
3
1.71
SOCKET

1.110
BOTTOM MOUNT-CLEARANCE .05 R
MOUNTING STUD HOLE FOR .192 SCREW 4 PLACES
NO. 10-32 UNF-2A NO. 4-40 UNC-2A TOP MOUNT-CLEARANCE
STAINLESS STEEL
2 PLACES 2 PLACES 2 PLACES HOLE FOR .112 SCREW .555
.93
.093
.277
.29
1.07
.220 .148
.68
.88 .28
1.406

NO. 4-40 UNC-2A

2 PLACES MOUNTING DIMENSIONS

GENERAL CHARACTERISTICS
1. Supplied with mounting hardware and No. 12 contacts and crimp for power terminals; No. 16 contacts and crimp for X coil; No. 22
contacts and crimp for Y coil.
2. Standard tolerances .xx ±.01; xxx ±.005
[3] Shape optional.
4. Weight .060 lb. max
5. Temperature range -70° C to +125° C

North America Europe, SA Asia-Pacific Ltd.

6900 Orangethorpe Ave. 2 Rue Goethe 20/F Shing Hing Commercial Bldg.
P.O. Box 5032 57430 Sarralbe 21-27 Wing Kut Street
Buena Park, CA 90622 USA France Central, Hong Kong

Tel: (01) 714-736-7599 Tel: (33) 3 87 97 98 97 Tel: (852) 2 191 2886

www.leachintl.com Fax: (01) 714-670-1145 Fax: (33) 3 87 97 84 04 Fax: (852) 2 389 5803

Data sheets are for initial product selection and comparison. Contact Leach International prior to choosing a component.

Date of issue: 3/06 - 22 - Page 1 of 1

 SO-1064-001
ENGINEERING DATA SHEET RELAY SOCKET
5 AMP

BASIC SOCKET SERIES DESIGNATION FOR:

Series X

DESIGNED TO THE STANDARDS AND REQUIREMENTS OF:

MIL-S-12883/45

SOCKET DRAWING HARDWARE MOUNTING

+ .005 POLARIZING HOLE MOUNTING DETAIL 2 PLACES

.375 -
.06 R
.150 TYP 4 PLACES RELAY

.150
2 -X2 3 SILICONE RUBBER
B

A
GASKET
+X1

.80 .075
.09 R 1.075
4 PLACES .093 MAX
1.437 MAX PANEL

SOCKET

NO. 8-32 UNC-2A

2 PLACES BOTTOM MOUNT-CLEARANCE
HOLE FOR .164 SCREW 1.075
STUD NO. 4-40 UNC-2A TOP MOUNT-CLEARANCE
STAINLESS STEEL 2 PLACES HOLE FOR .112 SCREW .880

.093
.570 -
+ .015
.425
.212
.695
MAX
.187
.031 R
4 PLACES
.665 NO. 4-40 UNC-2A
MAX STD. TOL. +.005
2 PLACES
.760
MAX MOUNTING DIMENSIONS

GENERAL CHARACTERISTICS
1. Supplied with mounting hardware and No. 20 contacts and No. 20 crimp.
2. Standard tolerances .xx ±.01; xxx ±.005
3. Weight .030 lb. max
4. Temperature range -70° C to +125° C

North America Europe, SA Asia-Pacific Ltd.

6900 Orangethorpe Ave. 2 Rue Goethe 20/F Shing Hing Commercial Bldg.
P.O. Box 5032 57430 Sarralbe 21-27 Wing Kut Street
Buena Park, CA 90622 USA France Central, Hong Kong

Tel: (01) 714-736-7599 Tel: (33) 3 87 97 98 97 Tel: (852) 2 191 2886

www.leachintl.com Fax: (01) 714-670-1145 Fax: (33) 3 87 97 84 04 Fax: (852) 2 389 5803

Data sheets are for initial product selection and comparison. Contact Leach International prior to choosing a component.

Date of issue: 3/06 - 23 - Page 1 of 1

 SO-1064-003
ENGINEERING DATA SHEET RELAY SOCKET
5 AMP

BASIC SOCKET SERIES DESIGNATION FOR:

Series XL

DESIGNED TO THE STANDARDS AND REQUIREMENTS OF:

MIL-S-12883/45

SOCKET DRAWING HARDWARE MOUNTING

.450 MOUNTING DETAIL 2 PLACES

.300 .06 R
RELAY
4 PLACES
.150
.150
.095 1 2 X2 3
SILICONE RUBBER
B
+Y1 -Y2
.3 GASKET
A
X1

.053 .075
.09 R .106
.093 MAX
4 PLACES .80 PANEL
1.075
1.437 MAX SOCKET

NO. 8-32 UNC-2A BOTTOM MOUNT-CLEARANCE

2 PLACES HOLE FOR .164 SCREW 1.075
TOP MOUNT-CLEARANCE
STUD NO. 4-40 UNC-2A
HOLE FOR .112 SCREW .880
STAINLESS STEEL 2 PLACES

.113 .425
.570 -
+ .015
.212

.695
MAX .031 R
.187 4 PLACES
.665 STD. TOL. +.005
MAX NO. 4-40 UNC-2A
.760
MAX
2 PLACES MOUNTING DIMENSIONS

GENERAL CHARACTERISTICS
1. Supplied with mounting hardware and (6) No. 20 contacts, No. 20 crimp for power terminals; (4) No. 22 contacts, No. 22 crimp for coil
terminals.
2. Standard tolerances .xx ±.01; xxx ±.005
3. Weight .030 lb. max
4. Temperature range -70° C to +125° C

North America Europe, SA Asia-Pacific Ltd.

6900 Orangethorpe Ave. 2 Rue Goethe 20/F Shing Hing Commercial Bldg.
P.O. Box 5032 57430 Sarralbe 21-27 Wing Kut Street
Buena Park, CA 90622 USA France Central, Hong Kong

Tel: (01) 714-736-7599 Tel: (33) 3 87 97 98 97 Tel: (852) 2 191 2886

www.leachintl.com Fax: (01) 714-670-1145 Fax: (33) 3 87 97 84 04 Fax: (852) 2 389 5803

Data sheets are for initial product selection and comparison. Contact Leach International prior to choosing a component.

Date of issue: 3/06 - 24 - Page 1 of 1

 SO-1064-10425
ENGINEERING DATA SHEET RELAY SOCKET
10 AMP

BASIC SOCKET SERIES DESIGNATION FOR:

Series XC

DESIGNED TO THE STANDARDS AND REQUIREMENTS OF:

MIL-S-12883

SOCKET DRAWING HARDWARE MOUNTING

.400
MOUNTING DETAIL 2 PLACES

.300 RELAY
.06 R
.200 4 PLACES
.150 SILICONE RUBBER
.206
A1 A2 X2 A3
GASKET
.3
X1

.103 .80 .075 .093 MAX

.09 R 1.075 PANEL
4 PLACES
1.437 MAX
SOCKET

BOTTOM MOUNT-CLEARANCE
NO. 8-32 UNC-2A HOLE FOR .164 SCREW 1.075
2 PLACES TOP MOUNT-CLEARANCE
STUD NO. 4-40 UNC-2A HOLE FOR .112 SCREW .880
STAINLESS STEEL 2 PLACES

.093 .425
.570 -
+ .015 .212

.695
MAX .031 R
.187 4 PLACES
.665 STD. TOL. +.005
MAX NO. 4-40 UNC-2A
.760
MAX
2 PLACES MOUNTING DIMENSIONS

GENERAL CHARACTERISTICS
1. Supplied with mounting hardware No. 16 contacts, No. 16 crimp for power terminals; No. 20 contacts, No. 20 crimp for coil terminals.
2. Standard tolerances .xx ±.01; xxx ±.005
3. Weight .030 lb. max
4. Temperature range -70° C to +125° C

North America Europe, SA Asia-Pacific Ltd.

6900 Orangethorpe Ave. 2 Rue Goethe 20/F Shing Hing Commercial Bldg.
P.O. Box 5032 57430 Sarralbe 21-27 Wing Kut Street
Buena Park, CA 90622 USA France Central, Hong Kong

Tel: (01) 714-736-7599 Tel: (33) 3 87 97 98 97 Tel: (852) 2 191 2886

www.leachintl.com Fax: (01) 714-670-1145 Fax: (33) 3 87 97 84 04 Fax: (852) 2 389 5803

Data sheets are for initial product selection and comparison. Contact Leach International prior to choosing a component.

Date of issue: 3/06 - 25 - Page 1 of 1

 SO-1064-10444/10445
ENGINEERING DATA SHEET RELAY SOCKET
5 AMP

BASIC SOCKET SERIES DESIGNATION FOR:

Series XA

DESIGNED TO THE STANDARDS AND REQUIREMENTS OF:

MIL-S-12883/45

SOCKET DRAWING HARDWARE MOUNTING

+.005
.450 -
MOUNTING DETAIL 2 PLACES
+ .005
.375 -
+ .005
.300 - .06 R RELAY
4 PLACES
+ .005
.150 -
.150 SILICONE RUBBER
GASKET
1
2 -X2 3 2 -X2 3
B B

A A
+X1 +X1

.80 .075 2 .093 MAX

.09 R 1.075 PANEL
4 PLACES
1.437 MAX
SOCKET

BOTTOM MOUNT-CLEARANCE
NO. .164-32 UNC-2A HOLE FOR .164 SCREW
2 PLACES 1.075
TOP MOUNT-CLEARANCE
STUD NO. .112-40 UNC-2A HOLE FOR .112 SCREW .880
STAINLESS STEEL 2 PLACES

.093 .425
.570 -
+ .015
.212
+ .015
.290 -

.695
MAX + .015
.280 - .031 R
.187 4 PLACES
.665 STD. TOL. +.005
MAX NO. .112-40 UNC-2A
.760
MAX
2 PLACES
MOUNTING DIMENSIONS
GENERAL CHARACTERISTICS
[1] Supplied with mounting hardware NO. 20 contacts and crimp for coil code J (SO-1064-10444).
[2] Supplied with mounting hardware NO. 20 contacts and crimp for coil codes F,K (SO-1064-10445).
3. Standard tolerances .xx ±.01; xxx ±.005
4. Weight .033 lb. max
5. Temperature range -70° C to +125° C

North America Europe, SA Asia-Pacific Ltd.

6900 Orangethorpe Ave. 2 Rue Goethe 20/F Shing Hing Commercial Bldg.
P.O. Box 5032 57430 Sarralbe 21-27 Wing Kut Street
Buena Park, CA 90622 USA France Central, Hong Kong

Tel: (01) 714-736-7599 Tel: (33) 3 87 97 98 97 Tel: (852) 2 191 2886

www.leachintl.com Fax: (01) 714-670-1145 Fax: (33) 3 87 97 84 04 Fax: (852) 2 389 5803

Data sheets are for initial product selection and comparison. Contact Leach International prior to choosing a component.

Date of issue: 3/06 - 26 - Page 1 of 1

 SO-1064-10534
ENGINEERING DATA SHEET RELAY SOCKET
10 AMP

BASIC SOCKET SERIES DESIGNATION FOR:

Series XCL

DESIGNED TO THE STANDARDS AND REQUIREMENTS OF:

MIL-S-12883

HARDWARE MOUNTING
SOCKET DRAWING
MOUNTING DETAIL 2 PLACES
.400

RELAY
.300

.200 .06 R
SILICONE RUBBER
4 PLACES
GASKET
.10 .150
.206
Y1 X2

.3
A1 A2 A3

Y2 X1
.093 MAX
.103 .80 PANEL
.075
.09 R 1.075
4 PLACES
1.437 MAX SOCKET

BOTTOM MOUNT-CLEARANCE
HOLE FOR .164 SCREW 1.075
NO. 8-32 UNC-2A TOP MOUNT-CLEARANCE
2 PLACES HOLE FOR .112 SCREW .880
STUD NO. 4-40 UNC-2A
STAINLESS STEEL 2 PLACES

.425
.093 .212
.570 -
+ .015

.695
MAX
.187
.665
MAX NO. 4-40 UNC-2A
.760
MAX
2 PLACES
MOUNTING DIMENSIONS

GENERAL CHARACTERISTICS
1. Supplied with mounting hardware No. 16 contacts, No. 16 crimp for power terminals; No. 20 contacts, No. 20 crimp for coil terminals.
2. Standard tolerances .xx ±.01; xxx ±.005.
3. Weight .036 lb. max
4. Temperature range -70° C to +125° C

North America Europe, SA Asia-Pacific Ltd.

6900 Orangethorpe Ave. 2 Rue Goethe 20/F Shing Hing Commercial Bldg.
P.O. Box 5032 57430 Sarralbe 21-27 Wing Kut Street
Buena Park, CA 90622 USA France Central, Hong Kong

Tel: (01) 714-736-7599 Tel: (33) 3 87 97 98 97 Tel: (852) 2 191 2886

www.leachintl.com Fax: (01) 714-670-1145 Fax: (33) 3 87 97 84 04 Fax: (852) 2 389 5803

Data sheets are for initial product selection and comparison. Contact Leach International prior to choosing a component.

Date of issue: 3/06 - 27 - Page 1 of 1

 SO-1065-001
ENGINEERING DATA SHEET RELAY SOCKET
10 AMP

BASIC SOCKET SERIES DESIGNATION FOR:

Series YC

DESIGNED TO THE STANDARDS AND REQUIREMENTS OF:

MIL-S-12883/46

HARDWARE MOUNTING
SOCKET DRAWING
MOUNTING DETAIL 3 PLACES
.06 R .200 TYP
4 PLACES
RELAY
.300
.09 R
4 PLACES
SILICONE RUBBER
.115
GASKET
1 2 3
C
.250 X2 .230 .345
.79 .500 B .460
X1
A
.093 MAX
PANEL
.80
1.075
SOCKET
1.437 MAX
BOTTOM MOUNT-CLEARANCE R .05
HOLE FOR .164 SCREW 4 PLACES
NO. 8-32 UNC-2A TOP MOUNT-CLEARANCE
3 PLACES HOLE FOR .112 SCREW
.880
STUD NO. 4-40 UNC-2A
STAINLESS STEEL 3 PLACES

.412
.250
.093 + .015 .500 .825
.570 -

.695
MAX
.187
1.075
.665
MAX NO. 4-40 UNC-2A
.760
MAX
3 PLACES
MOUNTING DIMENSIONS
GENERAL CHARACTERISTICS
1. Supplied with mounting hardware No. 16 contacts, and No. 16 crimp for power terminals; No. 20 contacts, No. 20 crimp for coil
terminals.
2. Standard tolerances .xx ±.01; xxx ±.005.
3. Weight .055 lb. max
4. Special track and module system available. Please contact factory. See SM-1001-003.
5. Temperature range -70° C to +125° C

North America Europe, SA Asia-Pacific Ltd.

6900 Orangethorpe Ave. 2 Rue Goethe 20/F Shing Hing Commercial Bldg.
P.O. Box 5032 57430 Sarralbe 21-27 Wing Kut Street
Buena Park, CA 90622 USA France Central, Hong Kong

Tel: (01) 714-736-7599 Tel: (33) 3 87 97 98 97 Tel: (852) 2 191 2886

www.leachintl.com Fax: (01) 714-670-1145 Fax: (33) 3 87 97 84 04 Fax: (852) 2 389 5803

Data sheets are for initial product selection and comparison. Contact Leach International prior to choosing a component.

Date of issue: 3/06 - 28 - Page 1 of 1

 SO-1065-003
ENGINEERING DATA SHEET RELAY SOCKET
10 AMP

BASIC SOCKET SERIES DESIGNATION FOR:

Series YCL

DESIGNED TO THE STANDARDS AND REQUIREMENTS OF:

MIL-S-12883/46

HARDWARE MOUNTING
SOCKET DRAWING
MOUNTING DETAIL 3 PLACES
.06 R .200
4 PLACES RELAY
.300
.09 R
4 PLACES .400 POLARIZING HOLE
SILICONE RUBBER
.490
.115 GASKET
1 2 3
C
.250 Y1 X2 .230 .345
.79 .500 B .460
Y2 X1
A .093 MAX
PANEL
.80
1.075
SOCKET
1.437 MAX
BOTTOM MOUNT-CLEARANCE R .05
HOLE FOR .164 SCREW 4 PLACES
NO. 8-32 UNC-2A
TOP MOUNT-CLEARANCE
3 PLACES
HOLE FOR .112 SCREW
STUD NO. 4-40 UNC-2A .880
STAINLESS STEEL 3 PLACES

.412
.093 + .015
.250
.570 - .500 .825

.695
MAX
.187
.665 1.075
MAX NO. 4-40 UNC-2A
.760 3 PLACES
MAX
MOUNTING DIMENSIONS
GENERAL CHARACTERISTICS
1. Supplied with mounting hardware and No. 16 contacts, No. 16 crimp for power terminals; No. 20 contacts, No. 20 crimp for coil
terminals.
2. Standard tolerances .xx ±.01; xxx ±.005.
3. Weight .056 lb. max
4. Temperature range -70° C to +125° C

North America Europe, SA Asia-Pacific Ltd.

6900 Orangethorpe Ave. 2 Rue Goethe 20/F Shing Hing Commercial Bldg.
P.O. Box 5032 57430 Sarralbe 21-27 Wing Kut Street
Buena Park, CA 90622 USA France Central, Hong Kong

Tel: (01) 714-736-7599 Tel: (33) 3 87 97 98 97 Tel: (852) 2 191 2886

www.leachintl.com Fax: (01) 714-670-1145 Fax: (33) 3 87 97 84 04 Fax: (852) 2 389 5803

Data sheets are for initial product selection and comparison. Contact Leach International prior to choosing a component.

Date of issue: 3/06 - 29 - Page 1 of 1

 SO-1065-10392/10393
ENGINEERING DATA SHEET RELAY SOCKET
10 AMP

BASIC SOCKET SERIES DESIGNATION FOR:

Series YCA

DESIGNED TO THE STANDARDS AND REQUIREMENTS OF:

MIL-S-12883/46

HARDWARE MOUNTING
SOCKET DRAWING
MOUNTING DETAIL 3 PLACES
.06 R .200
4 PLACES RELAY
.300
.09 R
4 PLACES
.400 SILICONE RUBBER
.115 GASKET
1 2 3 1 2 3
C C
.250 X2 .230 .345 X2
.79 .500 B .460 B
X1 X1
A A .093 MAX
PANEL
.80
1 2
1.075
SOCKET
1.437 MAX
BOTTOM MOUNT-CLEARANCE R .05
HOLE FOR .164 SCREW 4 PLACES
NO. 8-32 UNC-2A TOP MOUNT-CLEARANCE
3 PLACES HOLE FOR .112 SCREW
.880
STUD NO. 4-40 UNC-2A
STAINLESS STEEL 3 PLACES

.412
.093 .250
+ .015
.570 -
+ .015
.500 .825
.290 -

.695
MAX + .015
.280 -
.187

.665
1.075
MAX NO. 4-40 UNC-2A
.760 3 PLACES
MAX
MOUNTING DIMENSIONS
GENERAL CHARACTERISTICS
[1]. Supplied with mounting hardware and No. 16 contacts and crimp for power terminals; No. 20 contacts and crimp for coil terminals
(SO-1065-10392).
[2]. Supplied with mounting hardware and No. 16 contacts and crimp for power terminals; No. 20 contacts and crimp for coil terminals
(SO-1065-10393).
3. Standard tolerances .xx ±.01; xxx ±.005.
4. Weight .052 lb. max
5. Temperature range -70° C to +125° C

North America Europe, SA Asia-Pacific Ltd.

6900 Orangethorpe Ave. 2 Rue Goethe 20/F Shing Hing Commercial Bldg.
P.O. Box 5032 57430 Sarralbe 21-27 Wing Kut Street
Buena Park, CA 90622 USA France Central, Hong Kong

Tel: (01) 714-736-7599 Tel: (33) 3 87 97 98 97 Tel: (852) 2 191 2886

www.leachintl.com Fax: (01) 714-670-1145 Fax: (33) 3 87 97 84 04 Fax: (852) 2 389 5803

Data sheets are for initial product selection and comparison. Contact Leach International prior to choosing a component.

Date of issue: 3/06 - 30 - Page 1 of 1

 SO-1066-003
ENGINEERING DATA SHEET RELAY SOCKET
5 AMP

BASIC SOCKET SERIES DESIGNATION FOR:

Series YL

DESIGNED TO THE STANDARDS AND REQUIREMENTS OF:

MIL-S-12883/44

HARDWARE MOUNTING
SOCKET DRAWING
MOUNTING DETAIL 3 PLACES
.06 R
4 PLACES
RELAY
.09 R
4 PLACES .150
TYP SILICONE RUBBER
GASKET
1 2 X2 3
D
.250 C
.79 .500 B .150
A
X1
TYP .093 MAX
PANEL
.80 POLARIZING HOLE
1.075
SOCKET
1.437 MAX
BOTTOM MOUNT-CLEARANCE R .05
HOLE FOR .164 SCREW 4 PLACES
NO. 8-32 UNC-2A TOP MOUNT-CLEARANCE
3 PLACES HOLE FOR .112 SCREW
.880
STUD NO. 4-40 UNC-2A
STAINLESS STEEL 3 PLACES

.412
.093 .250
+ .015
.570 - .500 .825

.695
MAX
.187
1.075
.665
MAX NO. 4-40 UNC-2A
.760 3 PLACES
MAX
MOUNTING DIMENSIONS
GENERAL CHARACTERISTICS
1. Supplied with mounting hardware and (16) No. 16 contacts and No. 20 crimp.
2. Standard tolerances .xx ±.01; xxx ±.005.
3. Weight .052 lb. max
4. Temperature range -70° C to +125° C

North America Europe, SA Asia-Pacific Ltd.

6900 Orangethorpe Ave. 2 Rue Goethe 20/F Shing Hing Commercial Bldg.
P.O. Box 5032 57430 Sarralbe 21-27 Wing Kut Street
Buena Park, CA 90622 USA France Central, Hong Kong

Tel: (01) 714-736-7599 Tel: (33) 3 87 97 98 97 Tel: (852) 2 191 2886

www.leachintl.com Fax: (01) 714-670-1145 Fax: (33) 3 87 97 84 04 Fax: (852) 2 389 5803

Data sheets are for initial product selection and comparison. Contact Leach International prior to choosing a component.

Date of issue: 3/06 - 32 - Page 1 of 1

 SO-1066-001
ENGINEERING DATA SHEET RELAY SOCKET
5 AMP

BASIC SOCKET SERIES DESIGNATION FOR:

Series Y

DESIGNED TO THE STANDARDS AND REQUIREMENTS OF:

MIL-S-12883/44

HARDWARE MOUNTING

MOUNTING DETAIL 3 PLACES

RELAY

SILICONE RUBBER
GASKET

.093 MAX
PANEL

SOCKET

BOTTOM MOUNT-CLEARANCE R .05

HOLE FOR .164 SCREW 4 PLACES
TOP MOUNT-CLEARANCE
HOLE FOR .112 SCREW
.880

.412
.250
.500 .825

1.075

MOUNTING DIMENSIONS
GENERAL CHARACTERISTICS
1. Supplied with mounting hardware and No. 20 contacts, No. 20 crimp.
2. Standard tolerances .xx ±.01; xxx ±.005.
3. Weight .052 lb. max
4. Special track and module available. Please consult factory, See SM-1002-003.
5. Temperature range -70° C to +125° C

North America Europe, SA Asia-Pacific Ltd.

6900 Orangethorpe Ave. 2 Rue Goethe 20/F Shing Hing Commercial Bldg.
P.O. Box 5032 57430 Sarralbe 21-27 Wing Kut Street
Buena Park, CA 90622 USA France Central, Hong Kong

Tel: (01) 714-736-7599 Tel: (33) 3 87 97 98 97 Tel: (852) 2 191 2886

www.leachintl.com Fax: (01) 714-670-1145 Fax: (33) 3 87 97 84 04 Fax: (852) 2 389 5803

Data sheets are for initial product selection and comparison. Contact Leach International prior to choosing a component.

Date of issue: 3/06 - 31 - Page 1 of 1

 SO-1066-10385/10386
ENGINEERING DATA SHEET RELAY SOCKET
5 AMP

BASIC SOCKET SERIES DESIGNATION FOR:

Series YA

DESIGNED TO THE STANDARDS AND REQUIREMENTS OF:

MIL-S-12883/44

HARDWARE MOUNTING
SOCKET DRAWING
MOUNTING DETAIL 3 PLACES
.06 R
4 PLACES
RELAY
.09 R
4 PLACES .150
TYP
SILICONE RUBBER
GASKET
1 2 3 1 2 3
D D
X2 X2
.250 C C
.79 .500 B .150 B
X1
A TYP A
X1 .093 MAX
PANEL
1 .80 2
1.075
SOCKET
1.437 MAX
BOTTOM MOUNT-CLEARANCE R .05
HOLE FOR .164 SCREW 4 PLACES
NO. 8-32 UNC-2A TOP MOUNT-CLEARANCE
3 PLACES HOLE FOR .112 SCREW
.880
STUD NO. 4-40 UNC-2A
STAINLESS STEEL 3 PLACES

.412
.250
.093 + .500 .825
.570 - .015

.695
MAX
.187 1.075
.665 NO. 4-40 UNC-2A
MAX 3 PLACES
.760
MAX MOUNTING DIMENSIONS
GENERAL CHARACTERISTICS
[1]. Supplied with mounting hardware and No. 20 contacts and crimp for coil codes F, K (SO-1066-10385).
[2]. Supplied with mounting hardware and No. 20 contacts and crimp for coil codes E, J (SO-1066-10386).
3. Standard tolerances .xx ±.01; xxx ±.005.
4. Weight .055 lb. max
5. Temperature range -70° C to +125° C

North America Europe, SA Asia-Pacific Ltd.

6900 Orangethorpe Ave. 2 Rue Goethe 20/F Shing Hing Commercial Bldg.
P.O. Box 5032 57430 Sarralbe 21-27 Wing Kut Street
Buena Park, CA 90622 USA France Central, Hong Kong

Tel: (01) 714-736-7599 Tel: (33) 3 87 97 98 97 Tel: (852) 2 191 2886

www.leachintl.com Fax: (01) 714-670-1145 Fax: (33) 3 87 97 84 04 Fax: (852) 2 389 5803

Data sheets are for initial product selection and comparison. Contact Leach International prior to choosing a component.

Date of issue: 3/06 - 33 - Page 1 of 1

 SO9005
ENGINEERING DATA SHEET SOCKET FOR RELAYS
2 AMP

BASIC SOCKET SERIES DESIGNATION FOR:

Series F250, F257, W260

DESIGNED TO THE STANDARDS AND REQUIREMENTS OF:

MIL-S-12883/44

DIMENSIONS

Ø 0.75
14.0
5.08

Ø 2.2
2.2
18.9
16.5
20.6

Ø 1.5
5.08

1.0
0.9 Ø 3.7
2.0

GENERAL CHARACTERISTICS
Temperature range -65°C to +125°C
Weight 10 grams
Terminal designations On coupling face
Insulation resistance 1200 M Ω
Contact resistance 2 mΩ

North America Europe, SA Asia-Pacific Ltd.

6900 Orangethorpe Ave. 2 Rue Goethe 20/F Shing Hing Commercial Bldg.
P.O. Box 5032 57430 Sarralbe 21-27 Wing Kut Street
Buena Park, CA 90622 USA France Central, Hong Kong

Tel: (01) 714-736-7599 Tel: (33) 3 87 97 98 97 Tel: (852) 2 191 2886

www.leachintl.com Fax: (01) 714-670-1145 Fax: (33) 3 87 97 84 04 Fax: (852) 2 389 5803

Data sheets are for initial product selection and comparison. Contact Leach International prior to choosing a component.

Date of issue: 3/06 - 93 - Page 1 of 1

 SO-SSL
ENGINEERING DATA SHEET SOCKET FOR 2 OR 4 POLE
10 AMP

SNAP AND LOCK SOCKET SERIES DESIGNATION FOR:

SERIES J, JA, K, KA, KL, TDX

DESIGNED TO THE STANDARDS AND REQUIREMENTS OF:

2-pole, 10A relays MIL-PRF-12883/41

Mates with M83536, M83726 and MS27709
4-pole, 10A relays MIL-PRF-12883/40
Mates with M83536

FEATURES
2 POLE
Low profile
Bottom panel mount
Snaps into panel
Other models available

MATERIALS
Socket body Polyetherimide per MIL-P-46184
Grommet Silicone rubber per ZZ-R-765
Hardware Stainless Steel
Contacts Copper alloy, hard gold plated
per MIL-G-45204
Contact retainers Beryllium copper

4 POLE

GENERAL CHARACTERISTICS
Insulation resistance 1000 M Ω min.
Dielectric withstanding voltage 1500 VRMS sea level; 500 VRMS at 80,000 ft
Weight 15.3g max.
Temperature range -65°C to +125°C
Vibration MIL-STD-202, Method 204, Test Condition G
Shock MIL-STD-202, Method 213, Test Condition C
This socket is designed to snap and lock into a panel to reduce hardware requirement and mounting time. Contacts
and hardware are provided disassembled in a plastic bag. Standard tolerances are .xx=±.01; .xxx=±.005 unless
otherwise noted.

North America Europe, SA Asia-Pacific Ltd.

6900 Orangethorpe Ave. 2 Rue Goethe 20/F Shing Hing Commercial Bldg.
P.O. Box 5032 57430 Sarralbe 21-27 Wing Kut Street
Buena Park, CA 90622 USA France Central, Hong Kong

Tel: (01) 714-736-7599 Tel: (33) 3 87 97 98 97 Tel: (852) 2 191 2886

www.leachintl.com Fax: (01) 714-670-1145 Fax: (33) 3 87 97 84 04 Fax: (852) 2 389 5803

Data sheets are for initial product selection and comparison. Contact Leach International prior to choosing a component.

Date of issue: 3/06 - 35 - Page 1 of 4

SOCKET DIMENSIONS SO-SSL (2 POLE)
RELAY
1.40
MTG SCREW
GASKET PHILLIPS HEAD
SUPPLIED 1.16
WITH
RELAY WASHER

SPACER .55

PANEL
.064±.005 THICK
4X R.055 MAX

2X Ø.200
SOCKET
RECOMMENDED MOUNTING PANEL CUTOUT

WIRE SEALING
GROMMET

1.71

.20

.20 .520 MAX

.89

.10

1.40

1.07

TERMINAL LAYOUT

SO-SSL-JA-2 SO-SSL-JA-1 SO-SSL-J-1

Date of issue: 3/06 - 36 - Page 2 of 4

SOCKET DIMENSIONS SO-SSL (4 POLE)

1.40
GASKET RELAY
SUPPLIED MTG SCREW 1.16
WITH PHILLIPS HEAD
RELAY

WASHER

SPACER
.62 1.110 MIN

PANEL
.064±.005 THICK

SOCKET

4X R.055 MAX
WIRE SEALING 3X Ø.200
GROMMET
RECOMMENDED MOUNTING PANEL CUTOUT

.200 TYP
1.71
.10

.200 TYP
.62 1.000 MAX .89

1.40 1.07

TERMINAL LAYOUT

SO-SSL-K-1 SO-SSL-KA-1 SO-SSL-KA-2

SO-SSL-KL-1 SO-SSL-TDX-1

Date of issue: 3/06 - 37 - Page 3 of 4

SOCKET NUMBERING SYSTEM SERIES SSL

SO SSL KA 001
1-Basic socket designation________________________| | | |||
2-Body style (short snap lock)________________________| | |||
3-Mating relay (J, JA, K, KA, KL, TDX)____________________| |||
4-Polarization (see terminal layout)__________________________|||
5-Hardware (0=less hardware, 1=with hardware)__________________||
6-Contacts (0=less contacts, 1=with contacts)___________________|

Date of issue: 3/06 - 38 - Page 4 of 4

 ENGINEERING DATA SHEET MT-3000-003
RELAY SOCKET TRACK

BASIC SOCKET SERIES DESIGNATION FOR:

Series SM Sockets (Track Mount)

DESIGNED TO THE STANDARDS AND REQUIREMENTS OF:

MIL-S-12883/53

SOCKET TRACK DRAWING

.166 DIA HOLE

.100 X .302 DIA
C'SINK (2 PLACES)

1.220 1.850

1.625 MAX 1.060 MAX

GENERAL CHARACTERISTICS
Used in conjunction with SM-1000-003, SM-1001-003 and SM-1002-003 track mount relay sockets.
Standard tolerances .xx ±.01; xxx ±.005.
Weight .056 lb. max.
M12883/53-001.....[MT-3000-003]

North America Europe, SA Asia-Pacific Ltd.

6900 Orangethorpe Ave. 2 Rue Goethe 20/F Shing Hing Commercial Bldg.
P.O. Box 5032 57430 Sarralbe 21-27 Wing Kut Street
Buena Park, CA 90622 USA France Central, Hong Kong

Tel: (01) 714-736-7599 Tel: (33) 3 87 97 98 97 Tel: (852) 2 191 2886

www.leachintl.com Fax: (01) 714-670-1145 Fax: (33) 3 87 97 84 04 Fax: (852) 2 389 5803

Data sheets are for initial product selection and comparison. Contact Leach International prior to choosing a component.

Date of issue: 3/06 - 39 - Page 1 of 1