CHAPTER V LOAD COMPUTATION AND ANALYSIS ||57

Wednesday, May 31, 2023, 02:53 AM

PAGE NO. 1

****************************************************
**
* STAAD.Pro V8i SELECTseries6 *
* Version 20.07.11.90 *
* Proprietary Program of *
* Bentley Systems, Inc. *
* Date= MAY 30, 2023 *
* Time= 23: 0: 8 *
**
* USER ID: *
****************************************************

1. STAAD SPACE
INPUT FILE: D:\CE PROJECT\ICT BUILDING\ict building.STD
2. START JOB INFORMATION
3. ENGINEER DATE 30-MAY-23
4. END JOB INFORMATION
5. INPUT WIDTH 79
6. UNIT METER KN
7. JOINT COORDINATES
8. 1 0 0 0; 2 0 2.5 0; 3 0 0 5.6; 4 0 2.5 5.6; 5 0 0 9.1; 6 0 2.5 9.1; 7 0 0 15.1
9. 8 0 2.5 15.1; 9 0 0 23.1; 10 0 2.5 23.1; 11 6 0 0; 12 6 2.5 0; 13 6 0 5.6
10. 14 6 2.5 5.6; 15 6 0 9.1; 16 6 2.5 9.1; 17 6 0 15.1; 18 6 2.5 15.1
11. 19 6 0 23.1; 20 6 2.5 23.1; 21 8.5 0 0; 22 8.5 2.5 0; 23 8.5 0 5.6
12. 24 8.5 2.5 5.6; 25 8.5 0 9.1; 26 8.5 2.5 9.1; 27 8.5 0 15.1; 28 8.5 2.5 15.1
13. 29 8.5 0 23.1; 30 8.5 2.5 23.1; 31 13 0 0; 32 13 2.5 0; 35 13 0 9.1
14. 36 13 2.5 9.1; 37 13 0 15.1; 38 13 2.5 15.1; 39 13 0 23.1; 40 13 2.5 23.1
15. 41 17.5 0 15.1; 42 17.5 2.5 15.1; 43 17.5 0 23.1; 44 17.5 2.5 23.1
16. 45 23.9 0 15.1; 46 23.9 2.5 15.1; 47 23.9 0 23.1; 48 23.9 2.5 23.1
17. 49 29 0 15.1; 50 29 2.5 15.1; 51 29 0 23.1; 52 29 2.5 23.1; 53 34.1 0 15.1
18. 54 34.1 2.5 15.1; 55 34.1 0 23.1; 56 34.1 2.5 23.1; 57 15.2 0 0; 58 15.2 2.5 0
19. 59 15.2 0 5.6; 60 15.2 2.5 5.6; 61 15.2 0 9.1; 62 15.2 2.5 9.1; 63 17.5 0 9.1
20. 64 17.5 2.5 9.1; 65 23.9 0 9.1; 66 23.9 2.5 9.1; 67 29 0 9.1; 68 29 2.5 9.1
21. 69 34.1 0 9.1; 70 34.1 2.5 9.1; 71 0 8.464 0; 72 0 8.464 5.6; 73 0 8.464 9.1
22. 74 0 8.464 15.1; 75 0 8.464 23.1; 76 6 8.464 0; 77 6 8.464 5.6; 78 6 8.464 9.1
23. 79 6 8.464 15.1; 80 6 8.464 23.1; 81 8.5 8.464 0; 82 8.5 8.464 5.6
24. 83 8.5 8.464 9.1; 84 8.5 8.464 15.1; 85 8.5 8.464 23.1; 86 13 8.464 0
25. 87 13 8.464 9.1; 88 13 8.464 15.1; 89 13 8.464 23.1; 90 17.5 8.464 15.1
26. 91 17.5 8.464 23.1; 92 23.9 8.464 15.1; 93 23.9 8.464 23.1; 94 29 8.464 15.1
27. 95 29 8.464 23.1; 96 34.1 8.464 15.1; 97 34.1 8.464 23.1; 98 15.2 8.464 0
28. 99 15.2 8.464 5.6; 100 15.2 8.464 9.1; 101 17.5 8.464 9.1; 102 23.9 8.464 9.1
29. 103 29 8.464 9.1; 104 34.1 8.464 9.1; 105 0 13.164 0; 106 0 13.164 5.6
30. 107 0 13.164 9.1; 108 0 13.164 15.1; 109 0 13.164 23.1; 110 6 13.164 0
31. 111 6 13.164 5.6; 112 6 13.164 9.1; 113 6 13.164 15.1; 114 6 13.164 23.1
32. 115 8.5 13.164 0; 116 8.5 13.164 5.6; 117 8.5 13.164 9.1; 118 8.5 13.164 15.1
33. 119 8.5 13.164 23.1; 120 13 13.164 0; 121 13 13.164 9.1; 122 13 13.164 15.1
34. 123 13 13.164 23.1; 124 17.5 13.164 15.1; 125 17.5 13.164 23.1
35. 126 23.9 13.164 15.1; 127 23.9 13.164 23.1; 128 29 13.164 15.1
36. 129 29 13.164 23.1; 130 34.1 13.164 15.1; 131 34.1 13.164 23.1
37. 132 15.2 13.164 0; 133 15.2 13.164 5.6; 134 15.2 13.164 9.1
38. 135 17.5 13.164 9.1; 136 23.9 13.164 9.1; 137 29 13.164 9.1
CHAPTER V LOAD COMPUTATION AND ANALYSIS ||58

D:\CE PROJECT\ICT BUILDING\ict building.anl Page 1 of 11

Wednesday, May 31, 2023, 02:53 AM
STAAD SPACE -- PAGE NO. 2

39. 138 34.1 13.164 9.1; 139 0 8.464 17.6; 140 6 8.464 17.6; 141 8.5 8.464 17.6
40. 142 13 8.464 17.6; 143 17.5 8.464 17.6; 144 23.9 8.464 17.6; 145 29 8.464 17.6
41. 146 34.1 8.464 17.6
42. MEMBER INCIDENCES
43. 1 1 2; 2 2 4; 3 3 4; 4 4 6; 5 5 6; 6 6 8; 7 7 8; 8 8 10; 9 9 10; 10 2 12
44. 11 4 14; 12 6 16; 13 8 18; 14 10 20; 15 11 12; 16 12 14; 17 13 14; 18 14 16
45. 19 15 16; 20 16 18; 21 17 18; 22 18 20; 23 19 20; 24 12 22; 25 14 24; 26 16 26
46. 27 18 28; 28 20 30; 29 21 22; 30 22 24; 31 23 24; 32 24 26; 33 25 26; 34 26 28
47. 35 27 28; 36 28 30; 37 29 30; 38 22 32; 40 26 36; 41 28 38; 42 30 40; 43 31 32
48. 47 35 36; 48 36 38; 49 37 38; 50 38 40; 51 39 40; 52 38 42; 53 40 44; 54 41 42
49. 55 42 44; 56 43 44; 57 42 46; 58 44 48; 59 45 46; 60 46 48; 61 47 48; 62 46 50
50. 63 48 52; 64 49 50; 65 50 52; 66 51 52; 67 50 54; 68 52 56; 69 53 54; 70 54 56
51. 71 55 56; 72 32 58; 73 57 58; 74 58 60; 75 59 60; 76 60 62; 77 61 62; 78 36 62
52. 79 42 64; 80 46 66; 81 63 64; 82 64 66; 83 65 66; 84 62 64; 85 50 68; 86 54 70
53. 87 66 68; 88 67 68; 89 68 70; 90 69 70; 91 24 60; 92 2 71; 93 4 72; 94 6 73
54. 95 8 74; 96 10 75; 97 12 76; 98 14 77; 99 16 78; 100 18 79; 101 20 80
55. 102 22 81; 103 24 82; 104 26 83; 105 28 84; 106 30 85; 107 32 86; 108 36 87
56. 109 38 88; 110 40 89; 111 42 90; 112 44 91; 113 46 92; 114 48 93; 115 50 94
57. 116 52 95; 117 54 96; 118 56 97; 119 58 98; 120 60 99; 121 62 100; 122 64 101
58. 123 66 102; 124 68 103; 125 70 104; 126 71 72; 127 72 73; 128 73 74
59. 129 74 139; 130 71 76; 131 72 77; 132 73 78; 133 74 79; 134 75 80; 135 76 77
60. 136 77 78; 137 78 79; 138 79 140; 139 76 81; 140 77 82; 141 78 83; 142 79 84
61. 143 80 85; 144 81 82; 145 82 83; 146 83 84; 147 84 141; 148 81 86; 149 83 87
62. 150 84 88; 151 85 89; 152 87 88; 153 88 142; 154 88 90; 155 89 91; 156 90 143
63. 157 90 92; 158 91 93; 159 92 144; 160 92 94; 161 93 95; 162 94 145; 163 94 96
64. 164 95 97; 165 96 146; 166 86 98; 167 98 99; 168 99 100; 169 87 100
65. 170 90 101; 171 92 102; 172 101 102; 173 100 101; 174 94 103; 175 96 104
66. 176 102 103; 177 103 104; 178 82 99; 179 71 105; 180 72 106; 181 73 107
67. 182 74 108; 183 75 109; 184 76 110; 185 77 111; 186 78 112; 187 79 113
68. 188 80 114; 189 81 115; 190 82 116; 191 83 117; 192 84 118; 193 85 119
69. 194 86 120; 195 87 121; 196 88 122; 197 89 123; 198 90 124; 199 91 125
70. 200 92 126; 201 93 127; 202 94 128; 203 95 129; 204 96 130; 205 97 131
71. 206 98 132; 207 99 133; 208 100 134; 209 101 135; 210 102 136; 211 103 137
72. 212 104 138; 213 105 106; 214 106 107; 215 107 108; 216 108 109; 217 105 110
73. 218 106 111; 219 107 112; 220 108 113; 221 109 114; 222 110 111; 223 111 112
74. 224 112 113; 225 113 114; 226 110 115; 227 111 116; 228 112 117; 229 113 118
75. 230 114 119; 231 115 116; 232 116 117; 233 117 118; 234 118 119; 235 115 120
76. 236 117 121; 237 118 122; 238 119 123; 239 121 122; 240 122 123; 241 122 124
77. 242 123 125; 243 124 125; 244 124 126; 245 125 127; 246 126 127; 247 126 128
78. 248 127 129; 249 128 129; 250 128 130; 251 129 131; 252 130 131; 253 120 132
79. 254 132 133; 255 133 134; 256 121 134; 257 124 135; 258 126 136; 259 135 136
80. 260 134 135; 261 128 137; 262 130 138; 263 136 137; 264 137 138; 265 116 133
81. 266 139 75; 267 140 80; 268 141 85; 269 142 89; 270 143 91; 271 144 93
82. 272 145 95; 273 146 97; 274 139 140; 275 140 141; 276 141 142; 277 142 143
83. 278 143 144; 279 144 145; 280 145 146
84. START GROUP DEFINITION
85. FLOOR
86. _2NDFLOOR 126 TO 138 143 TO 146 148 TO 152 154 155 157 158 160 161 163 164 -
87. 166 TO 178 266 TO 280
88. _2NDHALLWAY 135 TO 142 144 TO 147 150 153 154 156 157 159 160 162 163 165 -
89. 275 TO 280
90. _ROOFDECL 213 TO 265
91. END GROUP DEFINITION
92. DEFINE MATERIAL START
93. ISOTROPIC CONCRETE
94. E 2.17185E+007
CHAPTER V LOAD COMPUTATION AND ANALYSIS ||59

D:\CE PROJECT\ICT BUILDING\ict building.anl Page 2 of 11

Wednesday, May 31, 2023, 02:53 AM
STAAD SPACE -- PAGE NO. 3

95. POISSON 0.17

96. DENSITY 23.5616
97. ALPHA 1E-005
98. DAMP 0.05
99. TYPE CONCRETE
100. STRENGTH FCU 27579
101. END DEFINE MATERIAL
102. MEMBER PROPERTY AMERICAN
103. 1 3 5 7 9 15 17 19 21 23 29 31 33 35 37 43 47 49 51 54 56 59 61 64 66 69 71 -
104. 73 75 77 81 83 88 90 92 TO 125 179 TO 212 PRIS YD 0.6 ZD 0.6
105. 2 4 6 8 10 TO 14 16 18 20 22 24 TO 28 30 32 34 36 38 40 TO 42 48 50 52 53 -
106. 55 57 58 60 62 63 65 67 68 70 72 74 76 78 TO 80 82 84 TO 87 89 -
107. 91 PRIS YD 0.5 ZD 0.45
108. 126 TO 178 266 TO 280 PRIS YD 0.5 ZD 0.4
109. 213 TO 265 PRIS YD 0.4 ZD 0.25
110. CONSTANTS
111. MATERIAL CONCRETE ALL
112. SUPPORTS
113. 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 35 37 39 41 43 45 47 49 51 53 55 -
114. 57 59 61 63 65 67 69 PINNED
115. MEMBER RELEASE
116. 274 TO 280 START MZ
117. 274 TO 280 END MZ
118. DEFINE REFERENCE LOADS
119. LOAD R1 LOADTYPE DEAD TITLE REF LOAD - DL
120. SELFWEIGHT Y 1
121. FLOOR LOAD
122. _2NDFLOOR FLOAD 5.3 GY
123. _2NDHALLWAY FLOAD 5.3 GY
124. _ROOFDECL FLOAD 2.4 GY
125. MEMBER LOAD
126. 126 TO 130 134 TO 139 143 TO 148 151 TO 153 155 156 158 159 161 164 166 168 -
127. 170 171 266 TO 271 UNI GY 13.372
128. 2 4 6 8 10 14 16 18 20 22 24 28 30 32 34 36 38 40 TO 42 52 53 55 57 58 60 -
129. 63 68 72 76 78 TO 80 82 84 87 89 UNI GY 16.28
130. END DEFINE REFERENCE LOADS

*** NOTE: NEITHER "MASS" NOR "GRAVITY" REFERENCE LOADTYPE IS PRESENT.

MASS MODEL IS FORMED BY COMBINING ALL "DEAD" AND "LIVE" (IF ANY) REFERENCE
LOADTYPES.

*** NOTE: MASS MODEL FORMED WILL BE USED IN

SEISMIC/RESPONSE/TIME HISTORY LOADING, IF ANY.  IF MASS
MODEL IS SEPARATELY PROVIDED IN INDIVIDUAL LOADING, THE
GENERATED MASS  WILL BE REPLACED BY THE MASS PROVIDED IN
INDIVIDUAL LOADING.

131. FLOOR DIAPHRAGM

132. DIA 1 TYPE RIG HEI 2.5 JOINT 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 36 -
133. 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68 70
134. DIA 2 TYPE RIG HEI 8.464 JOINT 71 TO 104 139 TO 146
135. DIA 3 TYPE RIG HEI 13.164 JOINT 105 TO 138
CHAPTER V LOAD COMPUTATION AND ANALYSIS ||60

D:\CE PROJECT\ICT BUILDING\ict building.anl Page 3 of 11

Wednesday, May 31, 2023, 02:53 AM
STAAD SPACE -- PAGE NO. 4

************************************************************************************

FLOOR DIAPHRAGM UNIT - KN METE

--------------- ----------------

NO. TYPE FL. LEVEL FL. WT CENTRE OF MASS MASTER JOINT NO.
XZ

1 RIGID 2.500 5821.80 13.587 12.942 147

2 RIGID 8.464 8480.70 13.833 13.365 148
3 RIGID 13.164 2817.77 14.673 13.048 149

************************************************************************************

137. DEFINE UBC LOAD

138. ZONE 4 I 1 RWX 8.5 RWZ 8.5 STYP 4 CT 0.0731 NA 1 NV 1
139. REFERENCE LOAD Y

*** NOTE: SEISMIC WEIGHT TABLE IS PRESENT.THIS WEIGHT TABLE

WILL BE CONSIDERED IN STATIC SEISMIC ANALYSIS.

140. R1 1.0
141. LOAD 1 LOADTYPE SEISMIC TITLE EX
142. UBC LOAD X 1 DEC 1 ACC 0.05
143. PERFORM ANALYSIS

PROBLEMSTATISTICS
-----------------------------------

NUMBER OF JOINTS 147 NUMBER OF MEMBERS 276

NUMBER OF PLATES 0 NUMBER OF SOLIDS 0
NUMBER OF SURFACES 0 NUMBER OF SUPPORTS 34

SOLVER USED IS THE OUT-OF-CORE BASIC SOLVER

ORIGINAL/FINAL BAND-WIDTH= 67/ 19/ 450 DOF

TOTAL PRIMARY LOAD CASES = 1, TOTAL DEGREES OF FREEDOM = 450
TOTAL LOAD COMBINATION CASES = 0 SO FAR.
SIZE OF STIFFNESS MATRIX = 203 DOUBLE KILO-WORDS
CHAPTER V LOAD COMPUTATION AND ANALYSIS ||61

D:\CE PROJECT\ICT BUILDING\ict building.anl Page 4 of 11

Wednesday, May 31, 2023, 02:53 AM
STAAD SPACE -- PAGE NO. 5

REQRD/AVAIL. DISK SPACE = 14.6/ 161784.9 MB

***********************************************************
**
* X DIRECTION : Ta = 0.505 Tb = 0.655 Tuser = 0.000 *
* T = 0.655, LOAD FACTOR = 1.000 *
* UBC TYPE = 97 *
* UBC FACTOR V = 0.1150 x 17480.77 = 2010.39 KN *
**
***********************************************************

************************************************************************

***NOTE: SEISMIC LOAD IS ACTING AT CENTER OF MASS FOR RIGID DIAPHRAGM.

TORSION FROM STATIC ECCENTRICITY (esi) IS INCLUDED IN ANALYSIS.
DYNAMIC ECCENTRICITY APPLIED = DEC - 1

LOAD NO.: 1 DIRECTION : X UNIT - METE

STORY LEVEL DYN. ECC. (dec) ACC. ECC. (aec) DESIGN ECC.
----- ----- --------------- --------------- ---------------
XZXZXZ
dec + aec dec + aec

1 2.50 0.00 0.00 1.71 1.16 0.00 1.16

2 8.46 0.00 0.00 1.71 1.16 0.00 1.16
3 13.16 0.00 0.00 1.71 1.16 0.00 1.16

************************************************************************

144. CHANGE
145. LOAD 2 LOADTYPE SEISMIC TITLE EZ
146. UBC LOAD Z 1 DEC 1 ACC 0.05
147. PERFORM ANALYSIS
CHAPTER V LOAD COMPUTATION AND ANALYSIS ||62

D:\CE PROJECT\ICT BUILDING\ict building.anl Page 5 of 11

Wednesday, May 31, 2023, 02:53 AM
STAAD SPACE -- PAGE NO. 6

***********************************************************
**
* Z DIRECTION : Ta = 0.505 Tb = 0.778 Tuser = 0.000 *
* T = 0.505, LOAD FACTOR = 1.000 *
* UBC TYPE = 97 *
* UBC FACTOR V = 0.1294 x 17480.77 = 2262.22 KN *
**
***********************************************************

************************************************************************

***NOTE: SEISMIC LOAD IS ACTING AT CENTER OF MASS FOR RIGID DIAPHRAGM.

TORSION FROM STATIC ECCENTRICITY (esi) IS INCLUDED IN ANALYSIS.
DYNAMIC ECCENTRICITY APPLIED = DEC - 1

LOAD NO.: 2 DIRECTION : Z UNIT - METE

STORY LEVEL DYN. ECC. (dec) ACC. ECC. (aec) DESIGN ECC.
----- ----- --------------- --------------- ---------------
XZXZXZ
dec + aec dec + aec

1 2.50 0.00 0.00 1.71 1.16 1.71 0.00

2 8.46 0.00 0.00 1.71 1.16 1.71 0.00
3 13.16 0.00 0.00 1.71 1.16 1.71 0.00

************************************************************************

148. CHANGE
149. LOAD 3 LOADTYPE DEAD TITLE DL
150. REFERENCE LOAD
151. R1 -1.0
152. LOAD 4 LOADTYPE LIVE TITLE LL
153. FLOOR LOAD
154. _2NDHALLWAY FLOAD -4.8 GY
CHAPTER V LOAD COMPUTATION AND ANALYSIS ||63

D:\CE PROJECT\ICT BUILDING\ict building.anl Page 6 of 11

Wednesday, May 31, 2023, 02:53 AM
STAAD SPACE -- PAGE NO. 7

**NOTE** about Floor/OneWay Loads/Weights.

Please note that depending on the shape of the floor you may
have to break up the FLOOR/ONEWAY LOAD into multiple commands.
For details please refer to Technical Reference Manual
Section 5.32.4.2 Note d and/or "5.32.4.3 Note f.

155. _2NDFLOOR FLOAD -1.9 GY

156. _ROOFDECL FLOAD -1.9 GY
157. LOAD COMB 5 GENERATED NSCP 2015 DRIFT 1
158. 3 1.2 4 0.5 1 1.0
159. LOAD COMB 6 GENERATED NSCP 2015 DRIFT 2
160. 3 1.2 4 0.5 2 1.0
161. LOAD COMB 7 GENERATED NSCP 2015 DRIFT 3
162. 3 1.2 4 0.5 1 -1.0
163. LOAD COMB 8 GENERATED NSCP 2015 DRIFT 4
164. 3 1.2 4 0.5 2 -1.0
165. LOAD COMB 9 GENERATED NSCP 2015 DRIFT 5
166. 3 0.9 1 1.0
167. LOAD COMB 10 GENERATED NSCP 2015 DRIFT 6
168. 3 0.9 2 1.0
169. LOAD COMB 11 GENERATED NSCP 2015 DRIFT 7
170. 3 0.9 1 -1.0
171. LOAD COMB 12 GENERATED NSCP 2015 DRIFT 8
172. 3 0.9 2 -1.0
173. LOAD COMB 13 GENERATED NSCP 2015 CONCRETE 1
174. 3 1.4
175. LOAD COMB 14 GENERATED NSCP 2015 CONCRETE 2
176. 3 1.2 4 1.6
177. LOAD COMB 15 GENERATED NSCP 2015 CONCRETE 3
178. 3 1.42 4 0.5 1 1.25
179. LOAD COMB 16 GENERATED NSCP 2015 CONCRETE 4
180. 3 1.42 4 0.5 2 1.25
181. LOAD COMB 17 GENERATED NSCP 2015 CONCRETE 5
182. 3 1.42 4 0.5 1 -1.25
183. LOAD COMB 18 GENERATED NSCP 2015 CONCRETE 6
184. 3 1.42 4 0.5 2 -1.25
185. LOAD COMB 19 GENERATED NSCP 2015 CONCRETE 7
186. 3 1.42 1 1.25
187. LOAD COMB 20 GENERATED NSCP 2015 CONCRETE 8
188. 3 1.42 2 1.25
189. LOAD COMB 21 GENERATED NSCP 2015 CONCRETE 9
190. 3 1.42 1 -1.25
191. LOAD COMB 22 GENERATED NSCP 2015 CONCRETE 10
192. 3 1.42 2 -1.25
193. LOAD COMB 23 GENERATED NSCP 2015 CONCRETE 11
194. 3 0.68 1 1.25
195. LOAD COMB 24 GENERATED NSCP 2015 CONCRETE 12
196. 3 0.68 2 1.25
197. LOAD COMB 25 GENERATED NSCP 2015 CONCRETE 13
198. 3 0.68 1 -1.25
199. LOAD COMB 26 GENERATED NSCP 2015 CONCRETE 14
200. 3 0.68 2 -1.25
201. LOAD COMB 27 GENERATED NSCP 2015 FOOTING-FACTORED 1
202. 3 1.4
203. LOAD COMB 28 GENERATED NSCP 2015 FOOTING-FACTORED 2
204. 3 1.2 4 1.6
CHAPTER V LOAD COMPUTATION AND ANALYSIS ||64

D:\CE PROJECT\ICT BUILDING\ict building.anl Page 7 of 11

Wednesday, May 31, 2023, 02:53 AM
STAAD SPACE -- PAGE NO. 8

205. LOAD COMB 29 GENERATED NSCP 2015 FOOTING-FACTORED 3

206. 3 1.2 4 0.5 1 1.0
207. LOAD COMB 30 GENERATED NSCP 2015 FOOTING-FACTORED 4
208. 3 1.2 4 0.5 2 1.0
209. LOAD COMB 31 GENERATED NSCP 2015 FOOTING-FACTORED 5
210. 3 1.2 4 0.5 1 -1.0
211. LOAD COMB 32 GENERATED NSCP 2015 FOOTING-FACTORED 6
212. 3 1.2 4 0.5 2 -1.0
213. LOAD COMB 33 GENERATED NSCP 2015 FOOTING-FACTORED 7
214. 3 0.9 1 1.0
215. LOAD COMB 34 GENERATED NSCP 2015 FOOTING-FACTORED 8
216. 3 0.9 2 1.0
217. LOAD COMB 35 GENERATED NSCP 2015 FOOTING-FACTORED 9
218. 3 0.9 1 -1.0
219. LOAD COMB 36 GENERATED NSCP 2015 FOOTING-FACTORED 10
220. 3 0.9 2 -1.0
221. LOAD COMB 37 GENERATED NSCP 2015 FOOTING-SERVICE 1
222. 3 1.0 4 1.0
223. LOAD COMB 38 GENERATED NSCP 2015 FOOTING-SERVICE 2
224. 3 0.6 1 0.71
225. LOAD COMB 39 GENERATED NSCP 2015 FOOTING-SERVICE 3
226. 3 0.6 2 0.71
227. LOAD COMB 40 GENERATED NSCP 2015 FOOTING-SERVICE 4
228. 3 0.6 1 -0.71
229. LOAD COMB 41 GENERATED NSCP 2015 FOOTING-SERVICE 5
230. 3 0.6 2 -0.71
231. LOAD COMB 42 GENERATED NSCP 2015 FOOTING-SERVICE 6
232. 3 1.0 4 1.0 1 0.71
233. LOAD COMB 43 GENERATED NSCP 2015 FOOTING-SERVICE 7
234. 3 1.0 4 1.0 2 0.71
235. LOAD COMB 44 GENERATED NSCP 2015 FOOTING-SERVICE 8
236. 3 1.0 4 1.0 1 -0.71
237. LOAD COMB 45 GENERATED NSCP 2015 FOOTING-SERVICE 9
238. 3 1.0 4 1.0 2 -0.71
239. PERFORM ANALYSIS

240. LOAD LIST 5 TO 12

241. PRINT STORY DRIFT 0.004200
CHAPTER V LOAD COMPUTATION AND ANALYSIS ||65

D:\CE PROJECT\ICT BUILDING\ict building.anl Page 8 of 11

Wednesday, May 31, 2023, 02:53 AM

STAAD SPACE -- PAGE NO. 9

STORY HEIGHT LOAD AVG. DISP(CM ) DRIFT(CM ) RATIO STATUS

------------------------------------------------------------------------------------------  (METE) X Z X Z

BASE= 0.00 ALLOW. DRIFT = L / 238

1 0.00 5 0.0000 0.0000 0.0000 0.0000 L /999999 PASS  6 0.0000 0.0000 0.0000 0.0000 L /999999 PASS
7 0.0000 0.0000 0.0000 0.0000 L /999999 PASS  8 0.0000 0.0000 0.0000 0.0000 L /999999 PASS  9
0.0000 0.0000 0.0000 0.0000 L /999999 PASS  10 0.0000 0.0000 0.0000 0.0000 L /999999 PASS  11
0.0000 0.0000 0.0000 0.0000 L /999999 PASS  12 0.0000 0.0000 0.0000 0.0000 L /999999 PASS

2 2.50 5 0.4677 -0.0054 0.4677 0.0054 L / 534 PASS  6 0.0016 0.7402 0.0016 0.7402 L / 338 PASS  7 -
0.4691 0.0042 0.4691 0.0042 L / 533 PASS  8 -0.0030 -0.7413 0.0030 0.7413 L / 337 PASS  9 0.4680 -
0.0057 0.4680 0.0057 L / 534 PASS  10 0.0018 0.7398 0.0018 0.7398 L / 338 PASS  11 -0.4689 0.0039
0.4689 0.0039 L / 533 PASS  12 -0.0027 -0.7417 0.0027 0.7417 L / 337 PASS3 8.46 5 1.5871 -0.01931194
0.0139 L / 533 PASS D:\CE PROJECT\ICT BUILDING\ict building.anl Page 9of 11

Wednesday, May 31, 2023, 02:53 AM

STAAD SPACE -- PAGE NO. 10

6 0.0084 2.4507 0.0068 1.7105 L / 348 PASS  7 -1.5911 0.0244 1.1220

0.0202 L / 531 PASS  8 -0.0124 -2.4455 0.0094 1.7042 L / 350 PASS  9
1.5879 -0.0226 1.1200 0.0169 L / 532 PASS  10 0.0092 2.4474 0.0073
1.7076 L / 349 PASS  11 -1.5903 0.0211 1.1215 0.0172 L / 532 PASS  12 -
0.0116 -2.4488 0.0088 1.7072 L / 349 PASS

4 13.16 5 2.0800 -0.0568 0.4929 0.0375 L / 953 PASS  6 0.0032 3.3240

0.0052 0.8733 L / 538 PASS  7 -2.0867 0.0725 0.4956 0.0481 L / 948 PASS
8 -0.0098 -3.3082 0.0025 0.8627 L / 545 PASS  9 2.0812 -0.0630 0.4933
0.0405 L / 953 PASS  10 0.0044 3.3177 0.0048 0.8703 L / 540 PASS  11 -
2.0855 0.0662 0.4952 0.0451 L / 949 PASS  12 -0.0086 -3.3145 0.0029
0.8657 L / 543 PASS  242. PRINT DIA CR

************************************************************

CENTRE OF RIGIDITY UNIT - METE

------------------ -----------

DIAPHRAM FL. LEVEL X-COORDINATE Z-COORDINATE

1 2.500 13.437 11.911

2 8.464 13.158 11.886
3 13.164 12.973 11.876

************************************************************

243. FINISH
CHAPTER V LOAD COMPUTATION AND ANALYSIS ||66

D:\CE PROJECT\ICT BUILDING\ict building.anl Page 10 of 11

Wednesday, May 31, 2023, 02:53 AM
STAAD SPACE -- PAGE NO. 11

*********** END OF THE STAAD.Pro RUN ***********

**** DATE= MAY 30,2023 TIME= 23: 0:12 ****

************************************************************
* For technical assistance on STAAD.Pro, please visit *
* http://selectservices.bentley.com/en-US/ *
**
* Details about additional assistance from *
* Bentley and Partners can be found at program menu *
* Help->Technical Support *
**
* Copyright (c) 1997-2016 Bentley Systems, Inc. *
* http://www.bentley.com *
D:\CE PROJECT\ICT BUILDING\ict building.anl Page 11 of 11
CHAPTER V LOAD COMPUTATION AND ANALYSIS ||67
CHAPTER V LOAD COMPUTATION AND ANALYSIS ||68