862H

Engine Cummins QSL9.3

Gross Power 180 kW (241 hp / 245 ps) @ 2,200 rpm
Net Power 162 kW (217 hp / 220 ps) @ 2,200 rpm
Operating Weight
Standard Bucket Size
19,958 kg
4.0 m3
174 kN
WHEEL
LOADER
Max Breakout Force
Standard Dump Clearance 2,983 mm

T O U GH W O R LD. T O UGH EQ U IPM E N T.

862H
SPECIFICATIONS >>>
ENGINE LOADER ARM PERFORMANCE with Standard Bucket 4.0 m3
Emission Regulation Tier 3 / Stage III Tipping Load - Straight (ISO 14397-1:2007) 16,142 kg
Manufacturer Cummins Tipping Load - Full Turn (ISO 14397-1:2007) 13,642 kg
Model QSL9.3 Max Bucket Breakout Force 174 kN
Gross Power 180 kW (241 hp / 245 ps) @ 2,200 rpm A Maximum Hinge Pin Height 4,212 mm
Net Power 162 kW (217 hp / 220 ps) @ 2,200 rpm B Dump Clearance at Full Height Dis-
2,983 mm
Peak Torque 1,187 N·m charge
Displacement 9.3 L C Dump Reach at Full Height Discharge 1,312 mm
Number of Cylinder 6 D Maximum Digging Depth, Bucket Level 80 mm
Aspiration Turbocharged ﹠ Air-to-air intercooled S1 Rollback at Ground Level 43°
S2 Bucket Rollback at Carry 48°
TRANSMISSION S3 Bucket Rollback at Maximum Height 63°
Transmission Type Countershaft, power shift S4 Maximum Dump Angle at Full Height 45°
Torque Converter Single stage, three elements
Maximum Travel Speed, fwd 37 km/h BUCKET PERFORMANCE
Maximum Travel Speed, rev 26 /h Reference Bucket 3.0-6.5 m3
Number of Speed, fwd 4
DIMENSIONS
Number of Speed, Rev 3
E Ground Clearance 431 mm
AXLES G Wheelbase 3,450 mm
Differential Front Type Conventional H Cab Height 3,467 mm
Differential Rear Type Conventional J Wheel Tread 2,280 mm
Axle Oscillation ±12° K Width Over Tires 2,880 mm
L Length with Bucket Down 8,793 mm
STEERING M Turn Angle, Either Side 38°
Steering Configuration Articulated P Rear Angle of Departure 27°
Steering Relief Pressure 19 MPa R1 Turning Radius, Bucket Carry 7,253 mm
R2 Turning Radius, Outside of Tire 6,450 mm
BRAKES
W Width Over Bucket 3,232 mm
Service Brake Type Wet discs brake
Service Brake Actuation Hydraulic TIRES
Parking Brake Type Manual electronic control Tire Size 23.5 - 25
Parking Brake Actuation Hydraulic
OPERATING WEIGHTS
HYDRAULIC SYSTEM Operating Weight 19,958 kg
Main Pump Type Gear
Main Relief Pressure 20.7 MPa SERVICE CAPACITY
Raise 5.7 s Fuel Tank 330 L
Dump Time 1.3 s Engine Oil 22 L
Float Down Time 3s Cooling System 52 L
Fastest Total Cycle Time 10 s Hydraulic System 280 L
Transmission and Torque Converter 35 L
Axles, Each 41 L

Guangxi Liugong Machinery Co., Ltd. 04/2020 Designed by LiuGong

No. 1 Liutai Road, Liuzhou, Guangxi 545007, PR China Replace the previous versions of 12/2019
T: +86 772 3886124 E: [email protected]
www.liugong.com
Specifications and designs are subject to change without notice. Machines shown may include optional equipment. LiuGong standard and optional equipment may vary from region to region.
Please consult your LiuGong dealer for information specific to your area. Engine power kW is converted to horsepower (1 kW=1.3596 ps and 1 kW=1.3410 hp) in this file.