Scribd
Upload
103 views3 pages

Grease Selection Guide

Trade School Article | Lubrication - Grease – use the right one for the job. The classification, selection, and application of greases. Greases are designed for specific applications and if used in the wrong service they will not be effective. Compare the properties of greases and check those used in your equipment are suited to the service. Keywords: base oil, thickener, additives, friction.

Uploaded by

Don - BIN95.com
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
103 views3 pages

Grease Selection Guide

Trade School Article | Lubrication - Grease – use the right one for the job. The classification, selection, and application of greases. Greases are designed for specific applications and if used in the wrong service they will not be effective. Compare the properties of greases and check those used in your equipment are suited to the service. Keywords: base oil, thickener, additives, friction.

Uploaded by

Don - BIN95.com
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

FEED FORWARD FLYER

ADVANCING THE TECHNICAL KNOWLEDGE OF MAINTENANCE TRADESMEN AND PLANT OPERATORS

Lubrication Grease – USE THE RIGHT ONE FOR THE JOB.


ABSTRACT
Grease – use the right one for the job. The classification, selection and application of greases. Greases are designed
for specific applications and if used in the wrong service they will not be effective. Compare the properties of greases
and check those used in your equipment are suited to the service. Keywords: base oil, thickener, additives, friction.

LUBRICATING GREASES BASED ON MINERAL AND


SYNTHETIC OILS
Classification, Selection and Application
As long ago as 1400 BC., the Egyptians used greases made of olive oil and lime to lubricate their wooden wagon axles.
With the beginning of the Industrial Age, the development of modern greases progressed from sodium greases (1872)
through calcium and aluminium greases (1882), to calcium complex soap greases (1940) and lithium soap greases by
Shell in 1942.

The first aluminium, barium and lithium complex soap lubricating greases were patented in 1952. Since then, a large
number of lubricating grease patents have been granted, due to the large number of thickeners, base oils, and additives
that can be used. New or improved lubricating grease production processes were also developed.

The quantity of lubricating greases sold in Australia amounts to approximately 13 million kilograms in 1994 - is only a
small fraction of the total lubricant consumption of 500 million Litres.

The situation is similar in other industrialised countries. The relatively small proportion of grease sales belies the
enormous importance of lubricating greases for business and technology, which can be attributed to the high level of
quality they have achieved and the performance characteristics which have resulted. Metal soap greases are the clear
leaders in grease sales statistics, while non-soap greases as a group are of little importance in quantitative terms.

In engineering terms, however, and in terms of "modern and intelligent lubricating grease design," non-soap greases, for
example those containing synthetic organic thickeners and synthetic base oils, are more modern, promising products.

Classification of Lubricating Greases

The classification of lubricating greases is not uniformly regulated. Because of the versatility and the variations in their
composition, greases are essentially classified on the basis of their base oil or thickener.

THICKENER SHELL EXAMPLE SPECIAL PROPERTIES


LITHIUM SOAP ALVANIA EP2 ALL ROUND PERFORMER, COST EFFECTIVE
MIXED SOAP (Ca & Li) SUPERPLANT M GOOD WATER RESISTANCE & MECHANICAL
STABILITY
LITHIUM COMPLEX LITHPLEX L & M EXCELLENT ALL ROUND PERFORMER ESPECIALLY
FOR HIGH TEMPERATURES.
CLAY (BENTONITE) DARINA M & R2 GOOD HIGH TEMPERATURE GREASE, OTHERWISE
OF LITTLE USE.
POLYUREA STAMINA U2 EXCELLENT ALL ROUND PERFORMER WITH LONG
LIFE, LATEST TECHNOLOGY IN GREASE..
CALCIUM GRAPHITE GREASE GOOD WATER RESISTANCE.
3
WAX PETROLEUM JELLY PHARMACEUTICAL USE.

Base Oils

The oil present in a lubricating grease is referred to as its base oil. The proportion of base oil can vary depending on the
type and quantity of thickener and the intended application of the grease. For most greases, the base oil content is
between 85% and 97%.

.
© 2019 Trade-School.Education All Rights Reserved
Because the authors and publisher do not know the context in which the information presented in the Newsletter is to be
used they accept no responsibility for the consequences of using the information contained or implied in any articles
The type of base oil give a grease some of its typical characteristics.

Thickeners

Thickeners are divided into soaps and non-soaps, and give lubricating greases their typical properties as well. Soap
greases can be divided into simple and complex soap greases, each of which are referred to by the name of the cation
on which the soap is bases (e.g. lithium, sodium, calcium, barium, or aluminium soap greases).

These metal soaps are made from fatty acids, which are products obtained from animal or vegetable oils and fats.

These fatty acids are a mixture of a wide variety of chemically defined fatty acids. They are split into fatty acids and
glycerides by hydrolytic decomposition. The fatty acids are then combined with the corresponding metal hydroxides to
form the metal soaps used as thickeners for lubricating grease production.

Additives

Additives counteract wear and corrosion, provide additional friction reducing effects, improve the adhesion of the grease,
and prevent damage under boundary and mixed friction conditions.

Additives therefore affect the quality, potential applications, and ultimately the practical value of the grease. Additives
can be solid, polar, or polymeric.

Solid Additives

Graphite, Molybdenum Disulfide, Zinc Sulfide, talc, polytetrafluoroethylene, etc. are incorporated into greases in powder
form or as pigments. They act in the boundary and mixed friction regions. Solid additives improve running-in and
emergency operating characteristics.

Polar Additives

Polar substances are hydrocarbon molecules which behave in an electrically non-neutral way because of their molecular
structure (i.e. by incorporating other elements such as oxygen, sulfur, or chlorine), and are retained on metal surfaces as
if they were magnetic. The presence of polar substances increases adhesion of the lubricant film, since pure
hydrocarbons are "non-polar".

Polymer Additives

The correlation between temperature and the viscosity of mineral oils can be influenced by additives. These additives
consist of organic polymers with molecular weights of between 10,000 and 200,000. At moderate temperatures their
chain-like molecules are tangled together, but at high temperatures they extend into elongated threads. By
simultaneously switching to a low-viscosity base oil with a higher viscosity index (VI), the viscosity-temperature curve
can be flattened. The presence of polymers makes the viscosity of a base oil dependent on the shear rate.

Polymers generally improve the wear protection offered by lubricants. Polymers used as adhesion additives for greases
include polyisobutylenes, olefin polymers, and others. They improve the grease's adhesion to surfaces.

Additive Typical Compounds Purpose


Extreme Pressure Sulfur, chlorine and phosphorus compounds, Protect metal surfaces
Additives (E.P) sometimes combined with graphite or MoS2 against cold welding
Anti-wear Additives Organic phosphates or phosphites, zinc Reduce wear of metal
dithiophosphates, graphite, MoS2 surfaces
Corrosion Inhibitors Organic compounds containing active sulfur, Protect against corrosive
phosphorus or nitrogen, such as phosphites, attack on bearing materials or
metal salts or thiophosphoric acid, sulfated metallic contact surfaces
waxes, or terpenes
Anti-oxidants (Anti- Phenols, aromatic amines, sulfated phenols, Delay oxidative
aging) zinc dithiophosphates decomposition
Friction-reducing High molecular weight compounds such as Reduce friction under
Additives (Friction fatty oils, oxidised waxes or graphite and MoS2 boundary and mixed friction
Modifiers) conditions
Adhesion Improvers Polyisobutylenes, olefin polymers, latex Improve surface adhesion

NFR:MCL5/SDG11:95031401.DOC Page 2 of 3 June 13, 2002


FEED FORWARD FLYER
ADVANCING THE TECHNICAL KNOWLEDGE OF MAINTENANCE TRADESMEN AND PLANT OPERATORS
(Tackifiers)

Advantages Of Grease Lubrication Over Oil Lubrication

· Reduced design complexity


· Less maintenance is often required, since lifetime lubrication is possible.
· Less risk of leakage and simpler seal design
· Sealing effect is reinforced by used grease overflow ("grease collaring" or labyrinth).
· With high-speed greases, metered grease quantities, and a running-in period, low bearing temperatures can
be achieved at high revolutions.

Disadvantages Of Grease Lubrication Compared With Oil Lubrication

· Less heat dissipation possible


· Contaminants are captured by the grease film and not removed, especially with grease lubrication of minimal
quantity.
· At present, limiting speeds or speed factors are lower than with oil injection and oil/air lubrication.

Peter Haig, Shell Lubricants, Western Australia Engineer

.
© 2019 Trade-School.Education All Rights Reserved
Because the authors and publisher do not know the context in which the information presented in the Newsletter is to be
used they accept no responsibility for the consequences of using the information contained or implied in any articles

You might also like