Product Data Sheet APX18-209014-CT2

Optimizer® Dual Polarized Antenna, 1710-2170, 90deg, 15.9dBi, 1.2m, FET, 2deg

Product Description
Dense urban networks where site aspect is essential.
Features/Benefits
• Very broadband design.
• Reduction of visual impact by gathering 3 antennas in a cylindrical volume.
• Reduction of site dimensions will ease site acceptance.
• Possible camouflage solution on demand.
• Wind load thrust highly reduced.
• Compatible with usual base stations with 35 dB typical isolation between ports.
• Effective polarization diversity ensured by high cross polar discrimination.
• Optimized suppression of side lobes allows strong mechanical tilt.

Technical Specifications
Electrical Specifications
Frequency Range, MHz 1710-1900 1900-2170
Horizontal Beamwidth, deg 90
Vertical Beamwidth, deg 8 7.5
Electrical Downtilt Range, deg 2
Gain, dBi (dBd) 15.4 (13.3) 15.9 (13.8)
1st Upper Sidelobe Suppression, dB >20
Front-To-Back Ratio, dB >28
Polarization Dual pol +/-45°
VSWR < 1.4:1
Isolation between Ports, dB >30
3rd Order IMP @ 2 x 43 dBm, dBc >150, N/A
7th Order IMP @ 2 x 46 dBm, dBc N/A, >170
Impedance, Ohms 50
Maximum Power Input, W 300
Lightning Protection Direct Ground
Connector Type/Location (2) 7-16 DIN Female/Bottom
Mechanical Specifications
Dimensions - HxWxD, mm (in) 1220 x 169 x 80 (48.03 x 6.65 x 3.15)
Weight w/o Mtg Hardware, kg (lb) 6.5 (14.33)
Survival/Rated Wind Speed, km/h (mph) 200 (125) / 160 (100)
Wind Load @ Rated Wind, Front, N (lbf) 367 (82)
Wind Load @ Rated Wind, Max., N (lbf) 367 (82)
Wind Load @ Rated Wind, Side, N (lbf) 214 (48)
Wind Load @ Rated Wind, Rear, N (lbf) 177 (40)
Operation temperature, °C (°F) -40 to +60 (-40 to +140)
Radome Material/Color Fiberglass/Light Grey RAL7035
All information contained in the present datasheet is subject to confirmation at time of ordering

Mounting Hardware Material Diecasted Aluminum

Radiating Element Material Brass
Reflector Material Aluminum
Packing Dimensions, HxWxD, mm (in) 1464 x 251 x 203 (57.64 x 9.88 x 7.99)
Ordering Information
Mounting Hardware APM40-2
Mounting Pipe Diameter, mm (in) 60-120 (2.36-4.72)
Mounting Hardware Weight, kg (lb) 3.4 (7.5)

RFS The Clear Choice ® APX18-209014-CT2 Rev: A1 Print Date: 31.01.2014

Please visit us on the internet at http://www.rfsworld.com/ Radio Frequency Systems
 Product Data Sheet APX18-209014-CT2

Optimizer® Dual Polarized Antenna, 1710-2170, 90deg, 15.9dBi, 1.2m, FET, 2deg

Vertical Pattern Horizontal Pattern

Notes
For additional mounting information please click "External Document Link" below.
External Document Links
APM40 Series Datasheet
APM40 Series Installation Instructions
All information contained in the present datasheet is subject to confirmation at time of ordering

RFS The Clear Choice ® APX18-209014-CT2 Rev: A1 Print Date: 31.01.2014

Please visit us on the internet at http://www.rfsworld.com/ Radio Frequency Systems